Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

27 files changed, 305 insertions, 402 deletions

diff --git a/include/asm-generic/uaccess.h b/include/asm-generic/uaccess.h
index 6df9b0749671..cc6bb319e464 100644
--- a/include/asm-generic/uaccess.h
+++ b/include/asm-generic/uaccess.h
@@ -69,10 +69,6 @@ struct exception_table_entry
 	unsigned long insn, fixup;
 };
 
-/* Returns 0 if exception not found and fixup otherwise.  */
-extern unsigned long search_exception_table(unsigned long);
-
-
 /*
  * architectures with an MMU should override these two
  */
diff --git a/include/dt-bindings/thermal/tegra124-soctherm.h b/include/dt-bindings/thermal/tegra124-soctherm.h
index 729ab9fc325e..2a99f1d52bb5 100644
--- a/include/dt-bindings/thermal/tegra124-soctherm.h
+++ b/include/dt-bindings/thermal/tegra124-soctherm.h
@@ -11,4 +11,9 @@
 #define TEGRA124_SOCTHERM_SENSOR_PLLX 3
 #define TEGRA124_SOCTHERM_SENSOR_NUM 4
 
+#define TEGRA_SOCTHERM_THROT_LEVEL_LOW  0
+#define TEGRA_SOCTHERM_THROT_LEVEL_MED  1
+#define TEGRA_SOCTHERM_THROT_LEVEL_HIGH 2
+#define TEGRA_SOCTHERM_THROT_LEVEL_NONE -1
+
 #endif
diff --git a/include/linux/amba/clcd.h b/include/linux/amba/clcd.h
index e82e3ee2c54a..1035879b322c 100644
--- a/include/linux/amba/clcd.h
+++ b/include/linux/amba/clcd.h
@@ -67,6 +67,17 @@
 #define CNTL_LDMAFIFOTIME	(1 << 15)
 #define CNTL_WATERMARK		(1 << 16)
 
+/* ST Microelectronics variant bits */
+#define CNTL_ST_1XBPP_444	0x0
+#define CNTL_ST_1XBPP_5551	(1 << 17)
+#define CNTL_ST_1XBPP_565	(1 << 18)
+#define CNTL_ST_CDWID_12	0x0
+#define CNTL_ST_CDWID_16	(1 << 19)
+#define CNTL_ST_CDWID_18	(1 << 20)
+#define CNTL_ST_CDWID_24	((1 << 19)|(1 << 20))
+#define CNTL_ST_CEAEN		(1 << 21)
+#define CNTL_ST_LCDBPP24_PACKED	(6 << 1)
+
 enum {
 	/* individual formats */
 	CLCD_CAP_RGB444		= (1 << 0),
@@ -93,6 +104,8 @@ enum {
 	CLCD_CAP_ALL		= CLCD_CAP_BGR | CLCD_CAP_RGB,
 };
 
+struct backlight_device;
+
 struct clcd_panel {
 	struct fb_videomode	mode;
 	signed short		width;	/* width in mm */
@@ -105,6 +118,13 @@ struct clcd_panel {
 				fixedtimings:1,
 				grayscale:1;
 	unsigned int		connector;
+	struct backlight_device	*backlight;
+	/*
+	 * If the B/R lines are switched between the CLCD
+	 * and the panel we need to know this and not try to
+	 * compensate with the BGR bit in the control register.
+	 */
+	bool			bgr_connection;
 };
 
 struct clcd_regs {
@@ -170,11 +190,38 @@ struct clcd_board {
 struct amba_device;
 struct clk;
 
+/**
+ * struct clcd_vendor_data - holds hardware (IP-block) vendor-specific
+ * variant information
+ *
+ * @clock_timregs: the CLCD needs to be clocked when accessing the
+ * timer registers, or the hardware will hang.
+ * @packed_24_bit_pixels: this variant supports 24bit packed pixel data,
+ * so that RGB accesses 3 bytes at a time, not just on even 32bit
+ * boundaries, packing the pixel data in memory. ST Microelectronics
+ * have this.
+ * @st_bitmux_control: ST Microelectronics have implemented output
+ * bit line multiplexing into the CLCD control register. This indicates
+ * that we need to use this.
+ * @init_board: custom board init function for this variant
+ * @init_panel: custom panel init function for this variant
+ */
+struct clcd_vendor_data {
+	bool	clock_timregs;
+	bool	packed_24_bit_pixels;
+	bool	st_bitmux_control;
+	int	(*init_board)(struct amba_device *adev,
+			      struct clcd_board *board);
+	int	(*init_panel)(struct clcd_fb *fb,
+			      struct device_node *panel);
+};
+
 /* this data structure describes each frame buffer device we find */
 struct clcd_fb {
 	struct fb_info		fb;
 	struct amba_device	*dev;
 	struct clk		*clk;
+	struct clcd_vendor_data	*vendor;
 	struct clcd_panel	*panel;
 	struct clcd_board	*board;
 	void			*board_data;
@@ -231,16 +278,22 @@ static inline void clcdfb_decode(struct clcd_fb *fb, struct clcd_regs *regs)
 	if (var->grayscale)
 		val |= CNTL_LCDBW;
 
-	if (fb->panel->caps && fb->board->caps &&
-	    var->bits_per_pixel >= 16) {
+	if (fb->panel->caps && fb->board->caps && var->bits_per_pixel >= 16) {
 		/*
 		 * if board and panel supply capabilities, we can support
-		 * changing BGR/RGB depending on supplied parameters
+		 * changing BGR/RGB depending on supplied parameters. Here
+		 * we switch to what the framebuffer is providing if need
+		 * be, so if the framebuffer is BGR but the display connection
+		 * is RGB (first case) we switch it around. Vice versa mutatis
+		 * mutandis if the framebuffer is RGB but the display connection
+		 * is BGR, we flip it around.
 		 */
 		if (var->red.offset == 0)
 			val &= ~CNTL_BGR;
 		else
 			val |= CNTL_BGR;
+		if (fb->panel->bgr_connection)
+			val ^= CNTL_BGR;
 	}
 
 	switch (var->bits_per_pixel) {
@@ -270,6 +323,10 @@ static inline void clcdfb_decode(struct clcd_fb *fb, struct clcd_regs *regs)
 		else
 			val |= CNTL_LCDBPP16_444;
 		break;
+	case 24:
+		/* Modified variant supporting 24 bit packed pixels */
+		val |= CNTL_ST_LCDBPP24_PACKED;
+		break;
 	case 32:
 		val |= CNTL_LCDBPP24;
 		break;
diff --git a/include/linux/exportfs.h b/include/linux/exportfs.h
index b03c0625fa6e..5ab958cdc50b 100644
--- a/include/linux/exportfs.h
+++ b/include/linux/exportfs.h
@@ -157,12 +157,13 @@ struct fid {
  *    @fh_to_dentry is given a &struct super_block (@sb) and a file handle
  *    fragment (@fh, @fh_len). It should return a &struct dentry which refers
  *    to the same file that the file handle fragment refers to.  If it cannot,
- *    it should return a %NULL pointer if the file was found but no acceptable
- *    &dentries were available, or an %ERR_PTR error code indicating why it
- *    couldn't be found (e.g. %ENOENT or %ENOMEM).  Any suitable dentry can be
- *    returned including, if necessary, a new dentry created with d_alloc_root.
- *    The caller can then find any other extant dentries by following the
- *    d_alias links.
+ *    it should return a %NULL pointer if the file cannot be found, or an
+ *    %ERR_PTR error code of %ENOMEM if a memory allocation failure occurred.
+ *    Any other error code is treated like %NULL, and will cause an %ESTALE error
+ *    for callers of exportfs_decode_fh().
+ *    Any suitable dentry can be returned including, if necessary, a new dentry
+ *    created with d_alloc_root.  The caller can then find any other extant
+ *    dentries by following the d_alias links.
  *
  * fh_to_parent:
  *    Same as @fh_to_dentry, except that it returns a pointer to the parent
diff --git a/include/linux/falloc.h b/include/linux/falloc.h
index 996111000a8c..7494dc67c66f 100644
--- a/include/linux/falloc.h
+++ b/include/linux/falloc.h
@@ -25,6 +25,7 @@ struct space_resv {
 					 FALLOC_FL_PUNCH_HOLE |		\
 					 FALLOC_FL_COLLAPSE_RANGE |	\
 					 FALLOC_FL_ZERO_RANGE |		\
-					 FALLOC_FL_INSERT_RANGE)
+					 FALLOC_FL_INSERT_RANGE |	\
+					 FALLOC_FL_UNSHARE_RANGE)
 
 #endif /* _FALLOC_H_ */
diff --git a/include/linux/mlx5/device.h b/include/linux/mlx5/device.h
index 77c141797152..58276144ba81 100644
--- a/include/linux/mlx5/device.h
+++ b/include/linux/mlx5/device.h
@@ -92,12 +92,21 @@ __mlx5_mask(typ, fld))
 	___t; \
 })
 
-#define MLX5_SET64(typ, p, fld, v) do { \
+#define __MLX5_SET64(typ, p, fld, v) do { \
 	BUILD_BUG_ON(__mlx5_bit_sz(typ, fld) != 64); \
-	BUILD_BUG_ON(__mlx5_bit_off(typ, fld) % 64); \
 	*((__be64 *)(p) + __mlx5_64_off(typ, fld)) = cpu_to_be64(v); \
 } while (0)
 
+#define MLX5_SET64(typ, p, fld, v) do { \
+	BUILD_BUG_ON(__mlx5_bit_off(typ, fld) % 64); \
+	__MLX5_SET64(typ, p, fld, v); \
+} while (0)
+
+#define MLX5_ARRAY_SET64(typ, p, fld, idx, v) do { \
+	BUILD_BUG_ON(__mlx5_bit_off(typ, fld) % 64); \
+	__MLX5_SET64(typ, p, fld[idx], v); \
+} while (0)
+
 #define MLX5_GET64(typ, p, fld) be64_to_cpu(*((__be64 *)(p) + __mlx5_64_off(typ, fld)))
 
 #define MLX5_GET64_PR(typ, p, fld) ({ \
diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h
index c6564ada9beb..9094faf0699d 100644
--- a/include/linux/nfs4.h
+++ b/include/linux/nfs4.h
@@ -67,6 +67,7 @@ struct nfs4_stateid_struct {
 		NFS4_DELEGATION_STATEID_TYPE,
 		NFS4_LAYOUT_STATEID_TYPE,
 		NFS4_PNFS_DS_STATEID_TYPE,
+		NFS4_REVOKED_STATEID_TYPE,
 	} type;
 };
 
diff --git a/include/linux/nfs_fs_sb.h b/include/linux/nfs_fs_sb.h
index 14a762d2734d..b34097c67848 100644
--- a/include/linux/nfs_fs_sb.h
+++ b/include/linux/nfs_fs_sb.h
@@ -103,6 +103,9 @@ struct nfs_client {
 #define NFS_SP4_MACH_CRED_WRITE    5	/* WRITE */
 #define NFS_SP4_MACH_CRED_COMMIT   6	/* COMMIT */
 #define NFS_SP4_MACH_CRED_PNFS_CLEANUP  7 /* LAYOUTRETURN */
+#if IS_ENABLED(CONFIG_NFS_V4_1)
+	wait_queue_head_t	cl_lock_waitq;
+#endif /* CONFIG_NFS_V4_1 */
 #endif /* CONFIG_NFS_V4 */
 
 	/* Our own IP address, as a null-terminated string.
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index 7cc0deee5bde..beb1e10f446e 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -125,6 +125,11 @@ struct nfs_fattr {
 		| NFS_ATTR_FATTR_V4_SECURITY_LABEL)
 
 /*
+ * Maximal number of supported layout drivers.
+ */
+#define NFS_MAX_LAYOUT_TYPES 8
+
+/*
  * Info on the file system
  */
 struct nfs_fsinfo {
@@ -139,7 +144,8 @@ struct nfs_fsinfo {
 	__u64			maxfilesize;
 	struct timespec		time_delta; /* server time granularity */
 	__u32			lease_time; /* in seconds */
-	__u32			layouttype; /* supported pnfs layout driver */
+	__u32			nlayouttypes; /* number of layouttypes */
+	__u32			layouttype[NFS_MAX_LAYOUT_TYPES]; /* supported pnfs layout driver */
 	__u32			blksize; /* preferred pnfs io block size */
 	__u32			clone_blksize; /* granularity of a CLONE operation */
 };
diff --git a/include/linux/pwm.h b/include/linux/pwm.h
index f1bbae014889..2c6c5114c089 100644
--- a/include/linux/pwm.h
+++ b/include/linux/pwm.h
@@ -641,6 +641,7 @@ static inline void pwm_remove_table(struct pwm_lookup *table, size_t num)
 #ifdef CONFIG_PWM_SYSFS
 void pwmchip_sysfs_export(struct pwm_chip *chip);
 void pwmchip_sysfs_unexport(struct pwm_chip *chip);
+void pwmchip_sysfs_unexport_children(struct pwm_chip *chip);
 #else
 static inline void pwmchip_sysfs_export(struct pwm_chip *chip)
 {
@@ -649,6 +650,10 @@ static inline void pwmchip_sysfs_export(struct pwm_chip *chip)
 static inline void pwmchip_sysfs_unexport(struct pwm_chip *chip)
 {
 }
+
+static inline void pwmchip_sysfs_unexport_children(struct pwm_chip *chip)
+{
+}
 #endif /* CONFIG_PWM_SYSFS */
 
 #endif /* __LINUX_PWM_H */
diff --git a/include/linux/sunrpc/auth.h b/include/linux/sunrpc/auth.h
index 4ccf184e971f..b1bc62ba20a2 100644
--- a/include/linux/sunrpc/auth.h
+++ b/include/linux/sunrpc/auth.h
@@ -131,6 +131,7 @@ struct rpc_authops {
 	struct rpc_auth *	(*create)(struct rpc_auth_create_args *, struct rpc_clnt *);
 	void			(*destroy)(struct rpc_auth *);
 
+	int			(*hash_cred)(struct auth_cred *, unsigned int);
 	struct rpc_cred *	(*lookup_cred)(struct rpc_auth *, struct auth_cred *, int);
 	struct rpc_cred *	(*crcreate)(struct rpc_auth*, struct auth_cred *, int, gfp_t);
 	int			(*list_pseudoflavors)(rpc_authflavor_t *, int);
diff --git a/include/linux/sunrpc/clnt.h b/include/linux/sunrpc/clnt.h
index 5c02b0691587..85cc819676e8 100644
--- a/include/linux/sunrpc/clnt.h
+++ b/include/linux/sunrpc/clnt.h
@@ -125,6 +125,13 @@ struct rpc_create_args {
 	struct svc_xprt		*bc_xprt;	/* NFSv4.1 backchannel */
 };
 
+struct rpc_add_xprt_test {
+	int (*add_xprt_test)(struct rpc_clnt *,
+		struct rpc_xprt *,
+		void *calldata);
+	void *data;
+};
+
 /* Values for "flags" field */
 #define RPC_CLNT_CREATE_HARDRTRY	(1UL << 0)
 #define RPC_CLNT_CREATE_AUTOBIND	(1UL << 2)
@@ -198,6 +205,16 @@ int		rpc_clnt_add_xprt(struct rpc_clnt *, struct xprt_create *,
 void		rpc_cap_max_reconnect_timeout(struct rpc_clnt *clnt,
 			unsigned long timeo);
 
+int		rpc_clnt_setup_test_and_add_xprt(struct rpc_clnt *,
+			struct rpc_xprt_switch *,
+			struct rpc_xprt *,
+			void *);
+
 const char *rpc_proc_name(const struct rpc_task *task);
+
+void rpc_clnt_xprt_switch_put(struct rpc_clnt *);
+void rpc_clnt_xprt_switch_add_xprt(struct rpc_clnt *, struct rpc_xprt *);
+bool rpc_clnt_xprt_switch_has_addr(struct rpc_clnt *clnt,
+			const struct sockaddr *sap);
 #endif /* __KERNEL__ */
 #endif /* _LINUX_SUNRPC_CLNT_H */
diff --git a/include/linux/sunrpc/rpc_rdma.h b/include/linux/sunrpc/rpc_rdma.h
index 3b1ff38f0c37..cfda6adcf33c 100644
--- a/include/linux/sunrpc/rpc_rdma.h
+++ b/include/linux/sunrpc/rpc_rdma.h
@@ -41,10 +41,15 @@
 #define _LINUX_SUNRPC_RPC_RDMA_H
 
 #include <linux/types.h>
+#include <linux/bitops.h>
 
 #define RPCRDMA_VERSION		1
 #define rpcrdma_version		cpu_to_be32(RPCRDMA_VERSION)
 
+enum {
+	RPCRDMA_V1_DEF_INLINE_SIZE	= 1024,
+};
+
 struct rpcrdma_segment {
 	__be32 rs_handle;	/* Registered memory handle */
 	__be32 rs_length;	/* Length of the chunk in bytes */
@@ -129,4 +134,38 @@ enum rpcrdma_proc {
 #define rdma_done	cpu_to_be32(RDMA_DONE)
 #define rdma_error	cpu_to_be32(RDMA_ERROR)
 
+/*
+ * Private extension to RPC-over-RDMA Version One.
+ * Message passed during RDMA-CM connection set-up.
+ *
+ * Add new fields at the end, and don't permute existing
+ * fields.
+ */
+struct rpcrdma_connect_private {
+	__be32			cp_magic;
+	u8			cp_version;
+	u8			cp_flags;
+	u8			cp_send_size;
+	u8			cp_recv_size;
+} __packed;
+
+#define rpcrdma_cmp_magic	__cpu_to_be32(0xf6ab0e18)
+
+enum {
+	RPCRDMA_CMP_VERSION		= 1,
+	RPCRDMA_CMP_F_SND_W_INV_OK	= BIT(0),
+};
+
+static inline u8
+rpcrdma_encode_buffer_size(unsigned int size)
+{
+	return (size >> 10) - 1;
+}
+
+static inline unsigned int
+rpcrdma_decode_buffer_size(u8 val)
+{
+	return ((unsigned int)val + 1) << 10;
+}
+
 #endif				/* _LINUX_SUNRPC_RPC_RDMA_H */
diff --git a/include/linux/sunrpc/sched.h b/include/linux/sunrpc/sched.h
index 817af0b4385e..7ba040c797ec 100644
--- a/include/linux/sunrpc/sched.h
+++ b/include/linux/sunrpc/sched.h
@@ -239,8 +239,8 @@ struct rpc_task *rpc_wake_up_first(struct rpc_wait_queue *,
 					void *);
 void		rpc_wake_up_status(struct rpc_wait_queue *, int);
 void		rpc_delay(struct rpc_task *, unsigned long);
-void *		rpc_malloc(struct rpc_task *, size_t);
-void		rpc_free(void *);
+int		rpc_malloc(struct rpc_task *);
+void		rpc_free(struct rpc_task *);
 int		rpciod_up(void);
 void		rpciod_down(void);
 int		__rpc_wait_for_completion_task(struct rpc_task *task, wait_bit_action_f *);
diff --git a/include/linux/sunrpc/svc_rdma.h b/include/linux/sunrpc/svc_rdma.h
index d6917b896d3a..cc3ae16eac68 100644
--- a/include/linux/sunrpc/svc_rdma.h
+++ b/include/linux/sunrpc/svc_rdma.h
@@ -86,6 +86,7 @@ struct svc_rdma_op_ctxt {
 	unsigned long flags;
 	enum dma_data_direction direction;
 	int count;
+	unsigned int mapped_sges;
 	struct ib_sge sge[RPCSVC_MAXPAGES];
 	struct page *pages[RPCSVC_MAXPAGES];
 };
@@ -136,6 +137,7 @@ struct svcxprt_rdma {
 	int		     sc_ord;		/* RDMA read limit */
 	int                  sc_max_sge;
 	int                  sc_max_sge_rd;	/* max sge for read target */
+	bool		     sc_snd_w_inv;	/* OK to use Send With Invalidate */
 
 	atomic_t             sc_sq_count;	/* Number of SQ WR on queue */
 	unsigned int	     sc_sq_depth;	/* Depth of SQ */
@@ -193,6 +195,14 @@ struct svcxprt_rdma {
 
 #define RPCSVC_MAXPAYLOAD_RDMA	RPCSVC_MAXPAYLOAD
 
+/* Track DMA maps for this transport and context */
+static inline void svc_rdma_count_mappings(struct svcxprt_rdma *rdma,
+					   struct svc_rdma_op_ctxt *ctxt)
+{
+	ctxt->mapped_sges++;
+	atomic_inc(&rdma->sc_dma_used);
+}
+
 /* svc_rdma_backchannel.c */
 extern int svc_rdma_handle_bc_reply(struct rpc_xprt *xprt,
 				    struct rpcrdma_msg *rmsgp,
diff --git a/include/linux/sunrpc/xdr.h b/include/linux/sunrpc/xdr.h
index 70c6b92e15a7..56c48c884a24 100644
--- a/include/linux/sunrpc/xdr.h
+++ b/include/linux/sunrpc/xdr.h
@@ -67,6 +67,18 @@ struct xdr_buf {
 			len;		/* Length of XDR encoded message */
 };
 
+static inline void
+xdr_buf_init(struct xdr_buf *buf, void *start, size_t len)
+{
+	buf->head[0].iov_base = start;
+	buf->head[0].iov_len = len;
+	buf->tail[0].iov_len = 0;
+	buf->page_len = 0;
+	buf->flags = 0;
+	buf->len = 0;
+	buf->buflen = len;
+}
+
 /*
  * pre-xdr'ed macros.
  */
diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h
index a16070dd03ee..a5da60b24d83 100644
--- a/include/linux/sunrpc/xprt.h
+++ b/include/linux/sunrpc/xprt.h
@@ -83,9 +83,11 @@ struct rpc_rqst {
 	void (*rq_release_snd_buf)(struct rpc_rqst *); /* release rq_enc_pages */
 	struct list_head	rq_list;
 
-	__u32 *			rq_buffer;	/* XDR encode buffer */
-	size_t			rq_callsize,
-				rq_rcvsize;
+	void			*rq_xprtdata;	/* Per-xprt private data */
+	void			*rq_buffer;	/* Call XDR encode buffer */
+	size_t			rq_callsize;
+	void			*rq_rbuffer;	/* Reply XDR decode buffer */
+	size_t			rq_rcvsize;
 	size_t			rq_xmit_bytes_sent;	/* total bytes sent */
 	size_t			rq_reply_bytes_recvd;	/* total reply bytes */
 							/* received */
@@ -127,8 +129,8 @@ struct rpc_xprt_ops {
 	void		(*rpcbind)(struct rpc_task *task);
 	void		(*set_port)(struct rpc_xprt *xprt, unsigned short port);
 	void		(*connect)(struct rpc_xprt *xprt, struct rpc_task *task);
-	void *		(*buf_alloc)(struct rpc_task *task, size_t size);
-	void		(*buf_free)(void *buffer);
+	int		(*buf_alloc)(struct rpc_task *task);
+	void		(*buf_free)(struct rpc_task *task);
 	int		(*send_request)(struct rpc_task *task);
 	void		(*set_retrans_timeout)(struct rpc_task *task);
 	void		(*timer)(struct rpc_xprt *xprt, struct rpc_task *task);
diff --git a/include/linux/sunrpc/xprtmultipath.h b/include/linux/sunrpc/xprtmultipath.h
index 5a9acffa41be..507418c1c69e 100644
--- a/include/linux/sunrpc/xprtmultipath.h
+++ b/include/linux/sunrpc/xprtmultipath.h
@@ -66,4 +66,6 @@ extern struct rpc_xprt *xprt_iter_xprt(struct rpc_xprt_iter *xpi);
 extern struct rpc_xprt *xprt_iter_get_xprt(struct rpc_xprt_iter *xpi);
 extern struct rpc_xprt *xprt_iter_get_next(struct rpc_xprt_iter *xpi);
 
+extern bool rpc_xprt_switch_has_addr(struct rpc_xprt_switch *xps,
+		const struct sockaddr *sap);
 #endif
diff --git a/include/linux/sunrpc/xprtrdma.h b/include/linux/sunrpc/xprtrdma.h
index 39267dc3486a..221b7a2e5406 100644
--- a/include/linux/sunrpc/xprtrdma.h
+++ b/include/linux/sunrpc/xprtrdma.h
@@ -53,8 +53,8 @@
 #define RPCRDMA_MAX_SLOT_TABLE	(256U)
 
 #define RPCRDMA_MIN_INLINE  (1024)	/* min inline thresh */
-#define RPCRDMA_DEF_INLINE  (1024)	/* default inline thresh */
-#define RPCRDMA_MAX_INLINE  (3068)	/* max inline thresh */
+#define RPCRDMA_DEF_INLINE  (4096)	/* default inline thresh */
+#define RPCRDMA_MAX_INLINE  (65536)	/* max inline thresh */
 
 /* Memory registration strategies, by number.
  * This is part of a kernel / user space API. Do not remove. */
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index ee517bef0db0..511182a88e76 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -92,12 +92,24 @@ enum thermal_trend {
 	THERMAL_TREND_DROP_FULL, /* apply lowest cooling action */
 };
 
+/* Thermal notification reason */
+enum thermal_notify_event {
+	THERMAL_EVENT_UNSPECIFIED, /* Unspecified event */
+	THERMAL_EVENT_TEMP_SAMPLE, /* New Temperature sample */
+	THERMAL_TRIP_VIOLATED, /* TRIP Point violation */
+	THERMAL_TRIP_CHANGED, /* TRIP Point temperature changed */
+	THERMAL_DEVICE_DOWN, /* Thermal device is down */
+	THERMAL_DEVICE_UP, /* Thermal device is up after a down event */
+	THERMAL_DEVICE_POWER_CAPABILITY_CHANGED, /* power capability changed */
+};
+
 struct thermal_zone_device_ops {
 	int (*bind) (struct thermal_zone_device *,
 		     struct thermal_cooling_device *);
 	int (*unbind) (struct thermal_zone_device *,
 		       struct thermal_cooling_device *);
 	int (*get_temp) (struct thermal_zone_device *, int *);
+	int (*set_trips) (struct thermal_zone_device *, int, int);
 	int (*get_mode) (struct thermal_zone_device *,
 			 enum thermal_device_mode *);
 	int (*set_mode) (struct thermal_zone_device *,
@@ -168,6 +180,10 @@ struct thermal_attr {
  * @last_temperature:	previous temperature read
  * @emul_temperature:	emulated temperature when using CONFIG_THERMAL_EMULATION
  * @passive:		1 if you've crossed a passive trip point, 0 otherwise.
+ * @prev_low_trip:	the low current temperature if you've crossed a passive
+			trip point.
+ * @prev_high_trip:	the above current temperature if you've crossed a
+			passive trip point.
  * @forced_passive:	If > 0, temperature at which to switch on all ACPI
  *			processor cooling devices.  Currently only used by the
  *			step-wise governor.
@@ -182,6 +198,7 @@ struct thermal_attr {
  * @lock:	lock to protect thermal_instances list
  * @node:	node in thermal_tz_list (in thermal_core.c)
  * @poll_queue:	delayed work for polling
+ * @notify_event: Last notification event
  */
 struct thermal_zone_device {
 	int id;
@@ -199,6 +216,8 @@ struct thermal_zone_device {
 	int last_temperature;
 	int emul_temperature;
 	int passive;
+	int prev_low_trip;
+	int prev_high_trip;
 	unsigned int forced_passive;
 	atomic_t need_update;
 	struct thermal_zone_device_ops *ops;
@@ -210,6 +229,7 @@ struct thermal_zone_device {
 	struct mutex lock;
 	struct list_head node;
 	struct delayed_work poll_queue;
+	enum thermal_notify_event notify_event;
 };
 
 /**
@@ -333,6 +353,9 @@ struct thermal_genl_event {
  *
  * Optional:
  * @get_trend: a pointer to a function that reads the sensor temperature trend.
+ * @set_trips: a pointer to a function that sets a temperature window. When
+ *	       this window is left the driver must inform the thermal core via
+ *	       thermal_zone_device_update.
  * @set_emul_temp: a pointer to a function that sets sensor emulated
  *		   temperature.
  * @set_trip_temp: a pointer to a function that sets the trip temperature on
@@ -340,7 +363,8 @@ struct thermal_genl_event {
  */
 struct thermal_zone_of_device_ops {
 	int (*get_temp)(void *, int *);
-	int (*get_trend)(void *, long *);
+	int (*get_trend)(void *, int, enum thermal_trend *);
+	int (*set_trips)(void *, int, int);
 	int (*set_emul_temp)(void *, int);
 	int (*set_trip_temp)(void *, int, int);
 };
@@ -425,7 +449,9 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int,
 				     unsigned int);
 int thermal_zone_unbind_cooling_device(struct thermal_zone_device *, int,
 				       struct thermal_cooling_device *);
-void thermal_zone_device_update(struct thermal_zone_device *);
+void thermal_zone_device_update(struct thermal_zone_device *,
+				enum thermal_notify_event);
+void thermal_zone_set_trips(struct thermal_zone_device *);
 
 struct thermal_cooling_device *thermal_cooling_device_register(char *, void *,
 		const struct thermal_cooling_device_ops *);
@@ -435,6 +461,8 @@ thermal_of_cooling_device_register(struct device_node *np, char *, void *,
 void thermal_cooling_device_unregister(struct thermal_cooling_device *);
 struct thermal_zone_device *thermal_zone_get_zone_by_name(const char *name);
 int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp);
+int thermal_zone_get_slope(struct thermal_zone_device *tz);
+int thermal_zone_get_offset(struct thermal_zone_device *tz);
 
 int get_tz_trend(struct thermal_zone_device *, int);
 struct thermal_instance *get_thermal_instance(struct thermal_zone_device *,
@@ -473,7 +501,10 @@ static inline int thermal_zone_unbind_cooling_device(
 	struct thermal_zone_device *tz, int trip,
 	struct thermal_cooling_device *cdev)
 { return -ENODEV; }
-static inline void thermal_zone_device_update(struct thermal_zone_device *tz)
+static inline void thermal_zone_device_update(struct thermal_zone_device *tz,
+					      enum thermal_notify_event event)
+{ }
+static inline void thermal_zone_set_trips(struct thermal_zone_device *tz)
 { }
 static inline struct thermal_cooling_device *
 thermal_cooling_device_register(char *type, void *devdata,
@@ -492,6 +523,12 @@ static inline struct thermal_zone_device *thermal_zone_get_zone_by_name(
 static inline int thermal_zone_get_temp(
 		struct thermal_zone_device *tz, int *temp)
 { return -ENODEV; }
+static inline int thermal_zone_get_slope(
+		struct thermal_zone_device *tz)
+{ return -ENODEV; }
+static inline int thermal_zone_get_offset(
+		struct thermal_zone_device *tz)
+{ return -ENODEV; }
 static inline int get_tz_trend(struct thermal_zone_device *tz, int trip)
 { return -ENODEV; }
 static inline struct thermal_instance *
diff --git a/include/linux/watchdog.h b/include/linux/watchdog.h
index 7047bc7f8106..35a4d8185b51 100644
--- a/include/linux/watchdog.h
+++ b/include/linux/watchdog.h
@@ -19,6 +19,7 @@
 struct watchdog_ops;
 struct watchdog_device;
 struct watchdog_core_data;
+struct watchdog_governor;
 
 /** struct watchdog_ops - The watchdog-devices operations
  *
@@ -28,6 +29,7 @@ struct watchdog_core_data;
  * @ping:	The routine that sends a keepalive ping to the watchdog device.
  * @status:	The routine that shows the status of the watchdog device.
  * @set_timeout:The routine for setting the watchdog devices timeout value (in seconds).
+ * @set_pretimeout:The routine for setting the watchdog devices pretimeout.
  * @get_timeleft:The routine that gets the time left before a reset (in seconds).
  * @restart:	The routine for restarting the machine.
  * @ioctl:	The routines that handles extra ioctl calls.
@@ -46,6 +48,7 @@ struct watchdog_ops {
 	int (*ping)(struct watchdog_device *);
 	unsigned int (*status)(struct watchdog_device *);
 	int (*set_timeout)(struct watchdog_device *, unsigned int);
+	int (*set_pretimeout)(struct watchdog_device *, unsigned int);
 	unsigned int (*get_timeleft)(struct watchdog_device *);
 	int (*restart)(struct watchdog_device *, unsigned long, void *);
 	long (*ioctl)(struct watchdog_device *, unsigned int, unsigned long);
@@ -59,8 +62,10 @@ struct watchdog_ops {
  *		watchdog device.
  * @info:	Pointer to a watchdog_info structure.
  * @ops:	Pointer to the list of watchdog operations.
+ * @gov:	Pointer to watchdog pretimeout governor.
  * @bootstatus:	Status of the watchdog device at boot.
  * @timeout:	The watchdog devices timeout value (in seconds).
+ * @pretimeout: The watchdog devices pre_timeout value.
  * @min_timeout:The watchdog devices minimum timeout value (in seconds).
  * @max_timeout:The watchdog devices maximum timeout value (in seconds)
  *		as configurable from user space. Only relevant if
@@ -94,8 +99,10 @@ struct watchdog_device {
 	const struct attribute_group **groups;
 	const struct watchdog_info *info;
 	const struct watchdog_ops *ops;
+	const struct watchdog_governor *gov;
 	unsigned int bootstatus;
 	unsigned int timeout;
+	unsigned int pretimeout;
 	unsigned int min_timeout;
 	unsigned int max_timeout;
 	unsigned int min_hw_heartbeat_ms;
@@ -163,6 +170,13 @@ static inline bool watchdog_timeout_invalid(struct watchdog_device *wdd, unsigne
 		 t > wdd->max_timeout);
 }
 
+/* Use the following function to check if a pretimeout value is invalid */
+static inline bool watchdog_pretimeout_invalid(struct watchdog_device *wdd,
+					       unsigned int t)
+{
+	return t && wdd->timeout && t >= wdd->timeout;
+}
+
 /* Use the following functions to manipulate watchdog driver specific data */
 static inline void watchdog_set_drvdata(struct watchdog_device *wdd, void *data)
 {
@@ -174,6 +188,16 @@ static inline void *watchdog_get_drvdata(struct watchdog_device *wdd)
 	return wdd->driver_data;
 }
 
+/* Use the following functions to report watchdog pretimeout event */
+#if IS_ENABLED(CONFIG_WATCHDOG_PRETIMEOUT_GOV)
+void watchdog_notify_pretimeout(struct watchdog_device *wdd);
+#else
+static inline void watchdog_notify_pretimeout(struct watchdog_device *wdd)
+{
+	pr_alert("watchdog%d: pretimeout event\n", wdd->id);
+}
+#endif
+
 /* drivers/watchdog/watchdog_core.c */
 void watchdog_set_restart_priority(struct watchdog_device *wdd, int priority);
 extern int watchdog_init_timeout(struct watchdog_device *wdd,
diff --git a/include/net/bonding.h b/include/net/bonding.h
index 6360c259da6d..f32f7ef8a23a 100644
--- a/include/net/bonding.h
+++ b/include/net/bonding.h
@@ -37,18 +37,6 @@
 #ifndef __long_aligned
 #define __long_aligned __attribute__((aligned((sizeof(long)))))
 #endif
-/*
- * Less bad way to call ioctl from within the kernel; this needs to be
- * done some other way to get the call out of interrupt context.
- * Needs "ioctl" variable to be supplied by calling context.
- */
-#define IOCTL(dev, arg, cmd) ({		\
-	int res = 0;			\
-	mm_segment_t fs = get_fs();	\
-	set_fs(get_ds());		\
-	res = ioctl(dev, arg, cmd);	\
-	set_fs(fs);			\
-	res; })
 
 #define BOND_MODE(bond) ((bond)->params.mode)
 
diff --git a/include/net/l3mdev.h b/include/net/l3mdev.h
index b220dabeab45..3832099289c5 100644
--- a/include/net/l3mdev.h
+++ b/include/net/l3mdev.h
@@ -114,6 +114,25 @@ static inline u32 l3mdev_fib_table(const struct net_device *dev)
 	return tb_id;
 }
 
+static inline bool netif_index_is_l3_master(struct net *net, int ifindex)
+{
+	struct net_device *dev;
+	bool rc = false;
+
+	if (ifindex == 0)
+		return false;
+
+	rcu_read_lock();
+
+	dev = dev_get_by_index_rcu(net, ifindex);
+	if (dev)
+		rc = netif_is_l3_master(dev);
+
+	rcu_read_unlock();
+
+	return rc;
+}
+
 struct dst_entry *l3mdev_link_scope_lookup(struct net *net, struct flowi6 *fl6);
 
 static inline
@@ -207,6 +226,11 @@ static inline u32 l3mdev_fib_table_by_index(struct net *net, int ifindex)
 	return 0;
 }
 
+static inline bool netif_index_is_l3_master(struct net *net, int ifindex)
+{
+	return false;
+}
+
 static inline
 struct dst_entry *l3mdev_link_scope_lookup(struct net *net, struct flowi6 *fl6)
 {
diff --git a/include/uapi/linux/falloc.h b/include/uapi/linux/falloc.h
index 3e445a760f14..b075f601919b 100644
--- a/include/uapi/linux/falloc.h
+++ b/include/uapi/linux/falloc.h
@@ -58,4 +58,22 @@
  */
 #define FALLOC_FL_INSERT_RANGE		0x20
 
+/*
+ * FALLOC_FL_UNSHARE_RANGE is used to unshare shared blocks within the
+ * file size without overwriting any existing data. The purpose of this
+ * call is to preemptively reallocate any blocks that are subject to
+ * copy-on-write.
+ *
+ * Different filesystems may implement different limitations on the
+ * granularity of the operation. Most will limit operations to filesystem
+ * block size boundaries, but this boundary may be larger or smaller
+ * depending on the filesystem and/or the configuration of the filesystem
+ * or file.
+ *
+ * This flag can only be used with allocate-mode fallocate, which is
+ * to say that it cannot be used with the punch, zero, collapse, or
+ * insert range modes.
+ */
+#define FALLOC_FL_UNSHARE_RANGE		0x40
+
 #endif /* _UAPI_FALLOC_H_ */
diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h
index 2473272169f2..acb2b6152ba0 100644
--- a/include/uapi/linux/fs.h
+++ b/include/uapi/linux/fs.h
@@ -158,7 +158,8 @@ struct fsxattr {
 	__u32		fsx_extsize;	/* extsize field value (get/set)*/
 	__u32		fsx_nextents;	/* nextents field value (get)	*/
 	__u32		fsx_projid;	/* project identifier (get/set) */
-	unsigned char	fsx_pad[12];
+	__u32		fsx_cowextsize;	/* CoW extsize field value (get/set)*/
+	unsigned char	fsx_pad[8];
 };
 
 /*
@@ -179,6 +180,7 @@ struct fsxattr {
 #define FS_XFLAG_NODEFRAG	0x00002000	/* do not defragment */
 #define FS_XFLAG_FILESTREAM	0x00004000	/* use filestream allocator */
 #define FS_XFLAG_DAX		0x00008000	/* use DAX for IO */
+#define FS_XFLAG_COWEXTSIZE	0x00010000	/* CoW extent size allocator hint */
 #define FS_XFLAG_HASATTR	0x80000000	/* no DIFLAG for this	*/
 
 /* the read-only stuff doesn't really belong here, but any other place is
diff --git a/include/uapi/linux/nfs4.h b/include/uapi/linux/nfs4.h
index 2b871e0858d9..4ae62796bfde 100644
--- a/include/uapi/linux/nfs4.h
+++ b/include/uapi/linux/nfs4.h
@@ -39,8 +39,9 @@
 #define NFS4_FH_VOL_MIGRATION		0x0004
 #define NFS4_FH_VOL_RENAME		0x0008
 
-#define NFS4_OPEN_RESULT_CONFIRM 0x0002
-#define NFS4_OPEN_RESULT_LOCKTYPE_POSIX 0x0004
+#define NFS4_OPEN_RESULT_CONFIRM		0x0002
+#define NFS4_OPEN_RESULT_LOCKTYPE_POSIX		0x0004
+#define NFS4_OPEN_RESULT_MAY_NOTIFY_LOCK	0x0020
 
 #define NFS4_SHARE_ACCESS_MASK	0x000F
 #define NFS4_SHARE_ACCESS_READ	0x0001
diff --git a/include/video/exynos_mipi_dsim.h b/include/video/exynos_mipi_dsim.h
deleted file mode 100644
index 6a578f8a1b3e..000000000000
--- a/include/video/exynos_mipi_dsim.h
+++ /dev/null
@@ -1,358 +0,0 @@
-/* include/video/exynos_mipi_dsim.h
- *
- * Platform data header for Samsung SoC MIPI-DSIM.
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd
- *
- * InKi Dae <inki.dae@samsung.com>
- * Donghwa Lee <dh09.lee@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef _EXYNOS_MIPI_DSIM_H
-#define _EXYNOS_MIPI_DSIM_H
-
-#include <linux/device.h>
-#include <linux/fb.h>
-
-#define PANEL_NAME_SIZE		(32)
-
-/*
- * Enumerate display interface type.
- *
- * DSIM_COMMAND means cpu interface and rgb interface for DSIM_VIDEO.
- *
- * P.S. MIPI DSI Master has two display controller intefaces, RGB Interface
- *	for main display and CPU Interface(same as I80 Interface) for main
- *	and sub display.
- */
-enum mipi_dsim_interface_type {
-	DSIM_COMMAND,
-	DSIM_VIDEO
-};
-
-enum mipi_dsim_virtual_ch_no {
-	DSIM_VIRTUAL_CH_0,
-	DSIM_VIRTUAL_CH_1,
-	DSIM_VIRTUAL_CH_2,
-	DSIM_VIRTUAL_CH_3
-};
-
-enum mipi_dsim_burst_mode_type {
-	DSIM_NON_BURST_SYNC_EVENT,
-	DSIM_BURST_SYNC_EVENT,
-	DSIM_NON_BURST_SYNC_PULSE,
-	DSIM_BURST,
-	DSIM_NON_VIDEO_MODE
-};
-
-enum mipi_dsim_no_of_data_lane {
-	DSIM_DATA_LANE_1,
-	DSIM_DATA_LANE_2,
-	DSIM_DATA_LANE_3,
-	DSIM_DATA_LANE_4
-};
-
-enum mipi_dsim_byte_clk_src {
-	DSIM_PLL_OUT_DIV8,
-	DSIM_EXT_CLK_DIV8,
-	DSIM_EXT_CLK_BYPASS
-};
-
-enum mipi_dsim_pixel_format {
-	DSIM_CMD_3BPP,
-	DSIM_CMD_8BPP,
-	DSIM_CMD_12BPP,
-	DSIM_CMD_16BPP,
-	DSIM_VID_16BPP_565,
-	DSIM_VID_18BPP_666PACKED,
-	DSIM_18BPP_666LOOSELYPACKED,
-	DSIM_24BPP_888
-};
-
-/*
- * struct mipi_dsim_config - interface for configuring mipi-dsi controller.
- *
- * @auto_flush: enable or disable Auto flush of MD FIFO using VSYNC pulse.
- * @eot_disable: enable or disable EoT packet in HS mode.
- * @auto_vertical_cnt: specifies auto vertical count mode.
- *	in Video mode, the vertical line transition uses line counter
- *	configured by VSA, VBP, and Vertical resolution.
- *	If this bit is set to '1', the line counter does not use VSA and VBP
- *	registers.(in command mode, this variable is ignored)
- * @hse: set horizontal sync event mode.
- *	In VSYNC pulse and Vporch area, MIPI DSI master transfers only HSYNC
- *	start packet to MIPI DSI slave at MIPI DSI spec1.1r02.
- *	this bit transfers HSYNC end packet in VSYNC pulse and Vporch area
- *	(in mommand mode, this variable is ignored)
- * @hfp: specifies HFP disable mode.
- *	if this variable is set, DSI master ignores HFP area in VIDEO mode.
- *	(in command mode, this variable is ignored)
- * @hbp: specifies HBP disable mode.
- *	if this variable is set, DSI master ignores HBP area in VIDEO mode.
- *	(in command mode, this variable is ignored)
- * @hsa: specifies HSA disable mode.
- *	if this variable is set, DSI master ignores HSA area in VIDEO mode.
- *	(in command mode, this variable is ignored)
- * @cma_allow: specifies the number of horizontal lines, where command packet
- *	transmission is allowed after Stable VFP period.
- * @e_interface: specifies interface to be used.(CPU or RGB interface)
- * @e_virtual_ch: specifies virtual channel number that main or
- *	sub diaplsy uses.
- * @e_pixel_format: specifies pixel stream format for main or sub display.
- * @e_burst_mode: selects Burst mode in Video mode.
- *	in Non-burst mode, RGB data area is filled with RGB data and NULL
- *	packets, according to input bandwidth of RGB interface.
- *	In Burst mode, RGB data area is filled with RGB data only.
- * @e_no_data_lane: specifies data lane count to be used by Master.
- * @e_byte_clk: select byte clock source. (it must be DSIM_PLL_OUT_DIV8)
- *	DSIM_EXT_CLK_DIV8 and DSIM_EXT_CLK_BYPASSS are not supported.
- * @pll_stable_time: specifies the PLL Timer for stability of the ganerated
- *	clock(System clock cycle base)
- *	if the timer value goes to 0x00000000, the clock stable bit of status
- *	and interrupt register is set.
- * @esc_clk: specifies escape clock frequency for getting the escape clock
- *	prescaler value.
- * @stop_holding_cnt: specifies the interval value between transmitting
- *	read packet(or write "set_tear_on" command) and BTA request.
- *	after transmitting read packet or write "set_tear_on" command,
- *	BTA requests to D-PHY automatically. this counter value specifies
- *	the interval between them.
- * @bta_timeout: specifies the timer for BTA.
- *	this register specifies time out from BTA request to change
- *	the direction with respect to Tx escape clock.
- * @rx_timeout: specifies the timer for LP Rx mode timeout.
- *	this register specifies time out on how long RxValid deasserts,
- *	after RxLpdt asserts with respect to Tx escape clock.
- *	- RxValid specifies Rx data valid indicator.
- *	- RxLpdt specifies an indicator that D-PHY is under RxLpdt mode.
- *	- RxValid and RxLpdt specifies signal from D-PHY.
- */
-struct mipi_dsim_config {
-	unsigned char			auto_flush;
-	unsigned char			eot_disable;
-
-	unsigned char			auto_vertical_cnt;
-	unsigned char			hse;
-	unsigned char			hfp;
-	unsigned char			hbp;
-	unsigned char			hsa;
-	unsigned char			cmd_allow;
-
-	enum mipi_dsim_interface_type	e_interface;
-	enum mipi_dsim_virtual_ch_no	e_virtual_ch;
-	enum mipi_dsim_pixel_format	e_pixel_format;
-	enum mipi_dsim_burst_mode_type	e_burst_mode;
-	enum mipi_dsim_no_of_data_lane	e_no_data_lane;
-	enum mipi_dsim_byte_clk_src	e_byte_clk;
-
-	/*
-	 * ===========================================
-	 * |    P    |    M    |    S    |    MHz    |
-	 * -------------------------------------------
-	 * |    3    |   100   |    3    |    100    |
-	 * |    3    |   100   |    2    |    200    |
-	 * |    3    |    63   |    1    |    252    |
-	 * |    4    |   100   |    1    |    300    |
-	 * |    4    |   110   |    1    |    330    |
-	 * |   12    |   350   |    1    |    350    |
-	 * |    3    |   100   |    1    |    400    |
-	 * |    4    |   150   |    1    |    450    |
-	 * |    6    |   118   |    1    |    472    |
-	 * |	3    |   120   |    1    |    480    |
-	 * |   12    |   250   |    0    |    500    |
-	 * |    4    |   100   |    0    |    600    |
-	 * |    3    |    81   |    0    |    648    |
-	 * |    3    |    88   |    0    |    704    |
-	 * |    3    |    90   |    0    |    720    |
-	 * |    3    |   100   |    0    |    800    |
-	 * |   12    |   425   |    0    |    850    |
-	 * |    4    |   150   |    0    |    900    |
-	 * |   12    |   475   |    0    |    950    |
-	 * |    6    |   250   |    0    |   1000    |
-	 * -------------------------------------------
-	 */
-
-	/*
-	 * pms could be calculated as the following.
-	 * M * 24 / P * 2 ^ S = MHz
-	 */
-	unsigned char			p;
-	unsigned short			m;
-	unsigned char			s;
-
-	unsigned int			pll_stable_time;
-	unsigned long			esc_clk;
-
-	unsigned short			stop_holding_cnt;
-	unsigned char			bta_timeout;
-	unsigned short			rx_timeout;
-};
-
-/*
- * struct mipi_dsim_device - global interface for mipi-dsi driver.
- *
- * @dev: driver model representation of the device.
- * @id: unique device id.
- * @clock: pointer to MIPI-DSI clock of clock framework.
- * @irq: interrupt number to MIPI-DSI controller.
- * @reg_base: base address to memory mapped SRF of MIPI-DSI controller.
- *	(virtual address)
- * @lock: the mutex protecting this data structure.
- * @dsim_info: infomation for configuring mipi-dsi controller.
- * @master_ops: callbacks to mipi-dsi operations.
- * @dsim_lcd_dev: pointer to activated ddi device.
- *	(it would be registered by mipi-dsi driver.)
- * @dsim_lcd_drv: pointer to activated_ddi driver.
- *	(it would be registered by mipi-dsi driver.)
- * @lcd_info: pointer to mipi_lcd_info structure.
- * @state: specifies status of MIPI-DSI controller.
- *	the status could be RESET, INIT, STOP, HSCLKEN and ULPS.
- * @data_lane: specifiec enabled data lane number.
- *	this variable would be set by driver according to e_no_data_lane
- *	automatically.
- * @e_clk_src: select byte clock source.
- * @pd: pointer to MIPI-DSI driver platform data.
- * @phy: pointer to the MIPI-DSI PHY
- */
-struct mipi_dsim_device {
-	struct device			*dev;
-	int				id;
-	struct clk			*clock;
-	unsigned int			irq;
-	void __iomem			*reg_base;
-	struct mutex			lock;
-
-	struct mipi_dsim_config		*dsim_config;
-	struct mipi_dsim_master_ops	*master_ops;
-	struct mipi_dsim_lcd_device	*dsim_lcd_dev;
-	struct mipi_dsim_lcd_driver	*dsim_lcd_drv;
-
-	unsigned int			state;
-	unsigned int			data_lane;
-	unsigned int			e_clk_src;
-	bool				suspended;
-
-	struct mipi_dsim_platform_data	*pd;
-	struct phy			*phy;
-};
-
-/*
- * struct mipi_dsim_platform_data - interface to platform data
- *	for mipi-dsi driver.
- *
- * @lcd_panel_name: specifies lcd panel name registered to mipi-dsi driver.
- *	lcd panel driver searched would be actived.
- * @dsim_config: pointer of structure for configuring mipi-dsi controller.
- * @enabled: indicate whether mipi controller got enabled or not.
- * @lcd_panel_info: pointer for lcd panel specific structure.
- *	this structure specifies width, height, timing and polarity and so on.
- */
-struct mipi_dsim_platform_data {
-	char				lcd_panel_name[PANEL_NAME_SIZE];
-
-	struct mipi_dsim_config		*dsim_config;
-	unsigned int			enabled;
-	void				*lcd_panel_info;
-};
-
-/*
- * struct mipi_dsim_master_ops - callbacks to mipi-dsi operations.
- *
- * @cmd_write: transfer command to lcd panel at LP mode.
- * @cmd_read: read command from rx register.
- * @get_dsim_frame_done: get the status that all screen data have been
- *	transferred to mipi-dsi.
- * @clear_dsim_frame_done: clear frame done status.
- * @get_fb_frame_done: get frame done status of display controller.
- * @trigger: trigger display controller.
- *	- this one would be used only in case of CPU mode.
- *  @set_early_blank_mode: set framebuffer blank mode.
- *	- this callback should be called prior to fb_blank() by a client driver
- *	only if needing.
- *  @set_blank_mode: set framebuffer blank mode.
- *	- this callback should be called after fb_blank() by a client driver
- *	only if needing.
- */
-
-struct mipi_dsim_master_ops {
-	int (*cmd_write)(struct mipi_dsim_device *dsim, unsigned int data_id,
-		const unsigned char *data0, unsigned int data1);
-	int (*cmd_read)(struct mipi_dsim_device *dsim, unsigned int data_id,
-		unsigned int data0, unsigned int req_size, u8 *rx_buf);
-	int (*get_dsim_frame_done)(struct mipi_dsim_device *dsim);
-	int (*clear_dsim_frame_done)(struct mipi_dsim_device *dsim);
-
-	int (*get_fb_frame_done)(struct fb_info *info);
-	void (*trigger)(struct fb_info *info);
-	int (*set_early_blank_mode)(struct mipi_dsim_device *dsim, int power);
-	int (*set_blank_mode)(struct mipi_dsim_device *dsim, int power);
-};
-
-/*
- * device structure for mipi-dsi based lcd panel.
- *
- * @name: name of the device to use with this device, or an
- *	alias for that name.
- * @dev: driver model representation of the device.
- * @id: id of device to be registered.
- * @bus_id: bus id for identifing connected bus
- *	and this bus id should be same as id of mipi_dsim_device.
- * @irq: irq number for signaling when framebuffer transfer of
- *	lcd panel module is completed.
- *	this irq would be used only for MIPI-DSI based CPU mode lcd panel.
- * @master: pointer to mipi-dsi master device object.
- * @platform_data: lcd panel specific platform data.
- */
-struct mipi_dsim_lcd_device {
-	char			*name;
-	struct device		dev;
-	int			id;
-	int			bus_id;
-	int			irq;
-	int			panel_reverse;
-
-	struct mipi_dsim_device *master;
-	void			*platform_data;
-};
-
-/*
- * driver structure for mipi-dsi based lcd panel.
- *
- * this structure should be registered by lcd panel driver.
- * mipi-dsi driver seeks lcd panel registered through name field
- * and calls these callback functions in appropriate time.
- *
- * @name: name of the driver to use with this device, or an
- *	alias for that name.
- * @id: id of driver to be registered.
- *	this id would be used for finding device object registered.
- */
-struct mipi_dsim_lcd_driver {
-	char			*name;
-	int			id;
-
-	void	(*power_on)(struct mipi_dsim_lcd_device *dsim_dev, int enable);
-	void	(*set_sequence)(struct mipi_dsim_lcd_device *dsim_dev);
-	int	(*probe)(struct mipi_dsim_lcd_device *dsim_dev);
-	int	(*remove)(struct mipi_dsim_lcd_device *dsim_dev);
-	void	(*shutdown)(struct mipi_dsim_lcd_device *dsim_dev);
-	int	(*suspend)(struct mipi_dsim_lcd_device *dsim_dev);
-	int	(*resume)(struct mipi_dsim_lcd_device *dsim_dev);
-};
-
-/*
- * register mipi_dsim_lcd_device to mipi-dsi master.
- */
-int exynos_mipi_dsi_register_lcd_device(struct mipi_dsim_lcd_device
-						*lcd_dev);
-/**
- * register mipi_dsim_lcd_driver object defined by lcd panel driver
- * to mipi-dsi driver.
- */
-int exynos_mipi_dsi_register_lcd_driver(struct mipi_dsim_lcd_driver
-						*lcd_drv);
-#endif /* _EXYNOS_MIPI_DSIM_H */