summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-04-14 17:29:55 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2015-04-14 17:29:55 -0700
commitf0c1bc95a108b36677dde6c9d96a5bb810a05b75 (patch)
tree335c33469407d0ebda5670dabb49c6ecad64263e /include
parent1dcf58d6e6e6eb7ec10e9abc56887b040205b06f (diff)
parente554a99ee8d09132e80dc467433c9a4df9054645 (diff)
Merge tag 'mfd-for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones: "Changes to existing drivers: - Rename child driver [axp288_battery => axp288_fuel_gauge]; axp20x - Rename child driver [max77693-flash => max77693-led]; max77693 - Error handling fixes; intel_soc_pmic - GPIO tweaking; intel_soc_pmic - Remove non-DT code; vexpress-sysreg, tc3589x - Remove unused/legacy code; ti_am335x_tscadc, rts5249, rtsx_gops, rtsx_pcr, rtc-s5m, sec-core, max77693, menelaus, wm5102-tables - Trivial fixups; rtsx_pci, da9150-core, sec-core, max7769, max77693, mc13xxx-core, dln2, hi6421-pmic-core, rk808, twl4030-power, lpc_ich, menelaus, twl6040 - Update register/address values; rts5227, rts5249 - DT and/or binding document fixups; arizona, da9150, mt6397, axp20x, qcom-rpm, qcom-spmi-pmic - Couple of trivial core Kconfig fixups - Remove use of seq_printf return value; ab8500-debugfs - Remove __exit markups; menelaus, tps65010 - Fix platform-device name collisions; mfd-core New drivers/supported devices: - Add support for wm8280/wm8281 into arizona - Add support for COMe-cBL6 into kempld-core - Add support for rts524a and rts525a into rts5249 - Add support for ipq8064 into qcom_rpm - Add support for extcon into axp20x - New MediaTek MT6397 PMIC driver - New Maxim MAX77843 PMIC dirver - New Intel Quark X1000 I2C-GPIO driver - New Skyworks SKY81452 driver" * tag 'mfd-for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (76 commits) mfd: sec: Fix RTC alarm interrupt number on S2MPS11 mfd: wm5102: Remove registers for output 3R from readable list mfd: tps65010: Remove incorrect __exit markups mfd: devicetree: bindings: Add Qualcomm RPM regulator subnodes mfd: axp20x: Add support for extcon cell mfd: lpc_ich: Sort IDs mfd: twl6040: Remove wrong and unneeded "platform:twl6040" modalias mfd: qcom-spmi-pmic: Add specific compatible strings for Qualcomm's SPMI PMIC's mfd: axp20x: Fix duplicate const for model names mfd: menelaus: Use macro for magic number mfd: menelaus: Drop support for SW controller VCORE mfd: menelaus: Delete omap_has_menelaus mfd: arizona: Correct type of gpio_defaults mfd: lpc_ich: Sort IDs mfd: Fix a typo in Kconfig mfd: qcom_rpm: Add support for IPQ8064 mfd: devicetree: qcom_rpm: Document IPQ8064 resources mfd: core: Fix platform-device name collisions mfd: intel_quark_i2c_gpio: Don't crash if !DMI dt-bindings: Add vendor-prefix for X-Powers ...
Diffstat (limited to 'include')
-rw-r--r--include/dt-bindings/mfd/arizona.h (renamed from include/linux/mfd/arizona/gpio.h)67
-rw-r--r--include/dt-bindings/mfd/qcom-rpm.h6
-rw-r--r--include/linux/mfd/arizona/core.h1
-rw-r--r--include/linux/mfd/arizona/pdata.h24
-rw-r--r--include/linux/mfd/max77693-private.h5
-rw-r--r--include/linux/mfd/max77693.h13
-rw-r--r--include/linux/mfd/max77843-private.h454
-rw-r--r--include/linux/mfd/menelaus.h7
-rw-r--r--include/linux/mfd/mt6397/core.h64
-rw-r--r--include/linux/mfd/mt6397/registers.h362
-rw-r--r--include/linux/mfd/rk808.h3
-rw-r--r--include/linux/mfd/rtsx_pci.h1116
-rw-r--r--include/linux/mfd/samsung/core.h9
-rw-r--r--include/linux/mfd/samsung/irq.h2
-rw-r--r--include/linux/mfd/sky81452.h31
-rw-r--r--include/linux/mfd/ti_am335x_tscadc.h1
-rw-r--r--include/linux/platform_data/sky81452-backlight.h46
17 files changed, 1584 insertions, 627 deletions
diff --git a/include/linux/mfd/arizona/gpio.h b/include/dt-bindings/mfd/arizona.h
index d2146bb74f89..c7af7c7ef793 100644
--- a/include/linux/mfd/arizona/gpio.h
+++ b/include/dt-bindings/mfd/arizona.h
@@ -1,7 +1,7 @@
/*
- * GPIO configuration for Arizona devices
+ * Device Tree defines for Arizona devices
*
- * Copyright 2013 Wolfson Microelectronics. PLC.
+ * Copyright 2015 Cirrus Logic Inc.
*
* Author: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
*
@@ -10,9 +10,10 @@
* published by the Free Software Foundation.
*/
-#ifndef _ARIZONA_GPIO_H
-#define _ARIZONA_GPIO_H
+#ifndef _DT_BINDINGS_MFD_ARIZONA_H
+#define _DT_BINDINGS_MFD_ARIZONA_H
+/* GPIO Function Definitions */
#define ARIZONA_GP_FN_TXLRCLK 0x00
#define ARIZONA_GP_FN_GPIO 0x01
#define ARIZONA_GP_FN_IRQ1 0x02
@@ -61,36 +62,32 @@
#define ARIZONA_GP_FN_SYSCLK_ENA_STATUS 0x4B
#define ARIZONA_GP_FN_ASYNCCLK_ENA_STATUS 0x4C
-#define ARIZONA_GPN_DIR 0x8000 /* GPN_DIR */
-#define ARIZONA_GPN_DIR_MASK 0x8000 /* GPN_DIR */
-#define ARIZONA_GPN_DIR_SHIFT 15 /* GPN_DIR */
-#define ARIZONA_GPN_DIR_WIDTH 1 /* GPN_DIR */
-#define ARIZONA_GPN_PU 0x4000 /* GPN_PU */
-#define ARIZONA_GPN_PU_MASK 0x4000 /* GPN_PU */
-#define ARIZONA_GPN_PU_SHIFT 14 /* GPN_PU */
-#define ARIZONA_GPN_PU_WIDTH 1 /* GPN_PU */
-#define ARIZONA_GPN_PD 0x2000 /* GPN_PD */
-#define ARIZONA_GPN_PD_MASK 0x2000 /* GPN_PD */
-#define ARIZONA_GPN_PD_SHIFT 13 /* GPN_PD */
-#define ARIZONA_GPN_PD_WIDTH 1 /* GPN_PD */
-#define ARIZONA_GPN_LVL 0x0800 /* GPN_LVL */
-#define ARIZONA_GPN_LVL_MASK 0x0800 /* GPN_LVL */
-#define ARIZONA_GPN_LVL_SHIFT 11 /* GPN_LVL */
-#define ARIZONA_GPN_LVL_WIDTH 1 /* GPN_LVL */
-#define ARIZONA_GPN_POL 0x0400 /* GPN_POL */
-#define ARIZONA_GPN_POL_MASK 0x0400 /* GPN_POL */
-#define ARIZONA_GPN_POL_SHIFT 10 /* GPN_POL */
-#define ARIZONA_GPN_POL_WIDTH 1 /* GPN_POL */
-#define ARIZONA_GPN_OP_CFG 0x0200 /* GPN_OP_CFG */
-#define ARIZONA_GPN_OP_CFG_MASK 0x0200 /* GPN_OP_CFG */
-#define ARIZONA_GPN_OP_CFG_SHIFT 9 /* GPN_OP_CFG */
-#define ARIZONA_GPN_OP_CFG_WIDTH 1 /* GPN_OP_CFG */
-#define ARIZONA_GPN_DB 0x0100 /* GPN_DB */
-#define ARIZONA_GPN_DB_MASK 0x0100 /* GPN_DB */
-#define ARIZONA_GPN_DB_SHIFT 8 /* GPN_DB */
-#define ARIZONA_GPN_DB_WIDTH 1 /* GPN_DB */
-#define ARIZONA_GPN_FN_MASK 0x007F /* GPN_DB */
-#define ARIZONA_GPN_FN_SHIFT 0 /* GPN_DB */
-#define ARIZONA_GPN_FN_WIDTH 7 /* GPN_DB */
+/* GPIO Configuration Bits */
+#define ARIZONA_GPN_DIR 0x8000
+#define ARIZONA_GPN_PU 0x4000
+#define ARIZONA_GPN_PD 0x2000
+#define ARIZONA_GPN_LVL 0x0800
+#define ARIZONA_GPN_POL 0x0400
+#define ARIZONA_GPN_OP_CFG 0x0200
+#define ARIZONA_GPN_DB 0x0100
+
+/* Provide some defines for the most common configs */
+#define ARIZONA_GP_DEFAULT 0xffffffff
+#define ARIZONA_GP_OUTPUT (ARIZONA_GP_FN_GPIO)
+#define ARIZONA_GP_INPUT (ARIZONA_GP_FN_GPIO | \
+ ARIZONA_GPN_DIR)
+
+#define ARIZONA_32KZ_MCLK1 1
+#define ARIZONA_32KZ_MCLK2 2
+#define ARIZONA_32KZ_NONE 3
+
+#define ARIZONA_DMIC_MICVDD 0
+#define ARIZONA_DMIC_MICBIAS1 1
+#define ARIZONA_DMIC_MICBIAS2 2
+#define ARIZONA_DMIC_MICBIAS3 3
+
+#define ARIZONA_INMODE_DIFF 0
+#define ARIZONA_INMODE_SE 1
+#define ARIZONA_INMODE_DMIC 2
#endif
diff --git a/include/dt-bindings/mfd/qcom-rpm.h b/include/dt-bindings/mfd/qcom-rpm.h
index 388a6f3d6165..13a9d4bf2662 100644
--- a/include/dt-bindings/mfd/qcom-rpm.h
+++ b/include/dt-bindings/mfd/qcom-rpm.h
@@ -141,6 +141,12 @@
#define QCOM_RPM_SYS_FABRIC_MODE 131
#define QCOM_RPM_USB_OTG_SWITCH 132
#define QCOM_RPM_VDDMIN_GPIO 133
+#define QCOM_RPM_NSS_FABRIC_0_CLK 134
+#define QCOM_RPM_NSS_FABRIC_1_CLK 135
+#define QCOM_RPM_SMB208_S1a 136
+#define QCOM_RPM_SMB208_S1b 137
+#define QCOM_RPM_SMB208_S2a 138
+#define QCOM_RPM_SMB208_S2b 139
/*
* Constants used to select force mode for regulators.
diff --git a/include/linux/mfd/arizona/core.h b/include/linux/mfd/arizona/core.h
index 910e3aa1e965..f97010576f56 100644
--- a/include/linux/mfd/arizona/core.h
+++ b/include/linux/mfd/arizona/core.h
@@ -24,6 +24,7 @@ enum arizona_type {
WM5102 = 1,
WM5110 = 2,
WM8997 = 3,
+ WM8280 = 4,
};
#define ARIZONA_IRQ_GP1 0
diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h
index 4578c72c9b86..1789cb0f4f17 100644
--- a/include/linux/mfd/arizona/pdata.h
+++ b/include/linux/mfd/arizona/pdata.h
@@ -11,31 +11,26 @@
#ifndef _ARIZONA_PDATA_H
#define _ARIZONA_PDATA_H
-#define ARIZONA_GPN_DIR 0x8000 /* GPN_DIR */
+#include <dt-bindings/mfd/arizona.h>
+
#define ARIZONA_GPN_DIR_MASK 0x8000 /* GPN_DIR */
#define ARIZONA_GPN_DIR_SHIFT 15 /* GPN_DIR */
#define ARIZONA_GPN_DIR_WIDTH 1 /* GPN_DIR */
-#define ARIZONA_GPN_PU 0x4000 /* GPN_PU */
#define ARIZONA_GPN_PU_MASK 0x4000 /* GPN_PU */
#define ARIZONA_GPN_PU_SHIFT 14 /* GPN_PU */
#define ARIZONA_GPN_PU_WIDTH 1 /* GPN_PU */
-#define ARIZONA_GPN_PD 0x2000 /* GPN_PD */
#define ARIZONA_GPN_PD_MASK 0x2000 /* GPN_PD */
#define ARIZONA_GPN_PD_SHIFT 13 /* GPN_PD */
#define ARIZONA_GPN_PD_WIDTH 1 /* GPN_PD */
-#define ARIZONA_GPN_LVL 0x0800 /* GPN_LVL */
#define ARIZONA_GPN_LVL_MASK 0x0800 /* GPN_LVL */
#define ARIZONA_GPN_LVL_SHIFT 11 /* GPN_LVL */
#define ARIZONA_GPN_LVL_WIDTH 1 /* GPN_LVL */
-#define ARIZONA_GPN_POL 0x0400 /* GPN_POL */
#define ARIZONA_GPN_POL_MASK 0x0400 /* GPN_POL */
#define ARIZONA_GPN_POL_SHIFT 10 /* GPN_POL */
#define ARIZONA_GPN_POL_WIDTH 1 /* GPN_POL */
-#define ARIZONA_GPN_OP_CFG 0x0200 /* GPN_OP_CFG */
#define ARIZONA_GPN_OP_CFG_MASK 0x0200 /* GPN_OP_CFG */
#define ARIZONA_GPN_OP_CFG_SHIFT 9 /* GPN_OP_CFG */
#define ARIZONA_GPN_OP_CFG_WIDTH 1 /* GPN_OP_CFG */
-#define ARIZONA_GPN_DB 0x0100 /* GPN_DB */
#define ARIZONA_GPN_DB_MASK 0x0100 /* GPN_DB */
#define ARIZONA_GPN_DB_SHIFT 8 /* GPN_DB */
#define ARIZONA_GPN_DB_WIDTH 1 /* GPN_DB */
@@ -45,23 +40,10 @@
#define ARIZONA_MAX_GPIO 5
-#define ARIZONA_32KZ_MCLK1 1
-#define ARIZONA_32KZ_MCLK2 2
-#define ARIZONA_32KZ_NONE 3
-
#define ARIZONA_MAX_INPUT 4
-#define ARIZONA_DMIC_MICVDD 0
-#define ARIZONA_DMIC_MICBIAS1 1
-#define ARIZONA_DMIC_MICBIAS2 2
-#define ARIZONA_DMIC_MICBIAS3 3
-
#define ARIZONA_MAX_MICBIAS 3
-#define ARIZONA_INMODE_DIFF 0
-#define ARIZONA_INMODE_SE 1
-#define ARIZONA_INMODE_DMIC 2
-
#define ARIZONA_MAX_OUTPUT 6
#define ARIZONA_MAX_AIF 3
@@ -112,7 +94,7 @@ struct arizona_pdata {
int gpio_base;
/** Pin state for GPIO pins */
- int gpio_defaults[ARIZONA_MAX_GPIO];
+ unsigned int gpio_defaults[ARIZONA_MAX_GPIO];
/**
* Maximum number of channels clocks will be generated for,
diff --git a/include/linux/mfd/max77693-private.h b/include/linux/mfd/max77693-private.h
index 955dd990beaf..51633ea6f910 100644
--- a/include/linux/mfd/max77693-private.h
+++ b/include/linux/mfd/max77693-private.h
@@ -87,6 +87,7 @@ enum max77693_pmic_reg {
/* MAX77693 ITORCH register */
#define TORCH_IOUT1_SHIFT 0
#define TORCH_IOUT2_SHIFT 4
+#define TORCH_IOUT_MASK(x) (0xf << (x))
#define TORCH_IOUT_MIN 15625
#define TORCH_IOUT_MAX 250000
#define TORCH_IOUT_STEP 15625
@@ -113,8 +114,8 @@ enum max77693_pmic_reg {
#define FLASH_EN_FLASH 0x1
#define FLASH_EN_TORCH 0x2
#define FLASH_EN_ON 0x3
-#define FLASH_EN_SHIFT(x) (6 - ((x) - 1) * 2)
-#define TORCH_EN_SHIFT(x) (2 - ((x) - 1) * 2)
+#define FLASH_EN_SHIFT(x) (6 - (x) * 2)
+#define TORCH_EN_SHIFT(x) (2 - (x) * 2)
/* MAX77693 MAX_FLASH1 register */
#define MAX_FLASH1_MAX_FL_EN 0x80
diff --git a/include/linux/mfd/max77693.h b/include/linux/mfd/max77693.h
index 09a4dedaeea8..d450f687301b 100644
--- a/include/linux/mfd/max77693.h
+++ b/include/linux/mfd/max77693.h
@@ -81,19 +81,6 @@ enum max77693_led_boost_mode {
MAX77693_LED_BOOST_FIXED,
};
-struct max77693_led_platform_data {
- u32 fleds[2];
- u32 iout_torch[2];
- u32 iout_flash[2];
- u32 trigger[2];
- u32 trigger_type[2];
- u32 num_leds;
- u32 boost_mode;
- u32 flash_timeout;
- u32 boost_vout;
- u32 low_vsys;
-};
-
/* MAX77693 */
struct max77693_platform_data {
diff --git a/include/linux/mfd/max77843-private.h b/include/linux/mfd/max77843-private.h
new file mode 100644
index 000000000000..7178ace8379e
--- /dev/null
+++ b/include/linux/mfd/max77843-private.h
@@ -0,0 +1,454 @@
+/*
+ * Common variables for the Maxim MAX77843 driver
+ *
+ * Copyright (C) 2015 Samsung Electronics
+ * Author: Jaewon Kim <jaewon02.kim@samsung.com>
+ * Author: Beomho Seo <beomho.seo@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __MAX77843_PRIVATE_H_
+#define __MAX77843_PRIVATE_H_
+
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+
+#define I2C_ADDR_TOPSYS (0xCC >> 1)
+#define I2C_ADDR_CHG (0xD2 >> 1)
+#define I2C_ADDR_FG (0x6C >> 1)
+#define I2C_ADDR_MUIC (0x4A >> 1)
+
+/* Topsys, Haptic and LED registers */
+enum max77843_sys_reg {
+ MAX77843_SYS_REG_PMICID = 0x00,
+ MAX77843_SYS_REG_PMICREV = 0x01,
+ MAX77843_SYS_REG_MAINCTRL1 = 0x02,
+ MAX77843_SYS_REG_INTSRC = 0x22,
+ MAX77843_SYS_REG_INTSRCMASK = 0x23,
+ MAX77843_SYS_REG_SYSINTSRC = 0x24,
+ MAX77843_SYS_REG_SYSINTMASK = 0x26,
+ MAX77843_SYS_REG_TOPSYS_STAT = 0x28,
+ MAX77843_SYS_REG_SAFEOUTCTRL = 0xC6,
+
+ MAX77843_SYS_REG_END,
+};
+
+enum max77843_haptic_reg {
+ MAX77843_HAP_REG_MCONFIG = 0x10,
+
+ MAX77843_HAP_REG_END,
+};
+
+enum max77843_led_reg {
+ MAX77843_LED_REG_LEDEN = 0x30,
+ MAX77843_LED_REG_LED0BRT = 0x31,
+ MAX77843_LED_REG_LED1BRT = 0x32,
+ MAX77843_LED_REG_LED2BRT = 0x33,
+ MAX77843_LED_REG_LED3BRT = 0x34,
+ MAX77843_LED_REG_LEDBLNK = 0x38,
+ MAX77843_LED_REG_LEDRAMP = 0x36,
+
+ MAX77843_LED_REG_END,
+};
+
+/* Charger registers */
+enum max77843_charger_reg {
+ MAX77843_CHG_REG_CHG_INT = 0xB0,
+ MAX77843_CHG_REG_CHG_INT_MASK = 0xB1,
+ MAX77843_CHG_REG_CHG_INT_OK = 0xB2,
+ MAX77843_CHG_REG_CHG_DTLS_00 = 0xB3,
+ MAX77843_CHG_REG_CHG_DTLS_01 = 0xB4,
+ MAX77843_CHG_REG_CHG_DTLS_02 = 0xB5,
+ MAX77843_CHG_REG_CHG_CNFG_00 = 0xB7,
+ MAX77843_CHG_REG_CHG_CNFG_01 = 0xB8,
+ MAX77843_CHG_REG_CHG_CNFG_02 = 0xB9,
+ MAX77843_CHG_REG_CHG_CNFG_03 = 0xBA,
+ MAX77843_CHG_REG_CHG_CNFG_04 = 0xBB,
+ MAX77843_CHG_REG_CHG_CNFG_06 = 0xBD,
+ MAX77843_CHG_REG_CHG_CNFG_07 = 0xBE,
+ MAX77843_CHG_REG_CHG_CNFG_09 = 0xC0,
+ MAX77843_CHG_REG_CHG_CNFG_10 = 0xC1,
+ MAX77843_CHG_REG_CHG_CNFG_11 = 0xC2,
+ MAX77843_CHG_REG_CHG_CNFG_12 = 0xC3,
+
+ MAX77843_CHG_REG_END,
+};
+
+/* Fuel gauge registers */
+enum max77843_fuelgauge {
+ MAX77843_FG_REG_STATUS = 0x00,
+ MAX77843_FG_REG_VALRT_TH = 0x01,
+ MAX77843_FG_REG_TALRT_TH = 0x02,
+ MAX77843_FG_REG_SALRT_TH = 0x03,
+ MAX77843_FG_RATE_AT_RATE = 0x04,
+ MAX77843_FG_REG_REMCAP_REP = 0x05,
+ MAX77843_FG_REG_SOCREP = 0x06,
+ MAX77843_FG_REG_AGE = 0x07,
+ MAX77843_FG_REG_TEMP = 0x08,
+ MAX77843_FG_REG_VCELL = 0x09,
+ MAX77843_FG_REG_CURRENT = 0x0A,
+ MAX77843_FG_REG_AVG_CURRENT = 0x0B,
+ MAX77843_FG_REG_SOCMIX = 0x0D,
+ MAX77843_FG_REG_SOCAV = 0x0E,
+ MAX77843_FG_REG_REMCAP_MIX = 0x0F,
+ MAX77843_FG_REG_FULLCAP = 0x10,
+ MAX77843_FG_REG_AVG_TEMP = 0x16,
+ MAX77843_FG_REG_CYCLES = 0x17,
+ MAX77843_FG_REG_AVG_VCELL = 0x19,
+ MAX77843_FG_REG_CONFIG = 0x1D,
+ MAX77843_FG_REG_REMCAP_AV = 0x1F,
+ MAX77843_FG_REG_FULLCAP_NOM = 0x23,
+ MAX77843_FG_REG_MISCCFG = 0x2B,
+ MAX77843_FG_REG_RCOMP = 0x38,
+ MAX77843_FG_REG_FSTAT = 0x3D,
+ MAX77843_FG_REG_DQACC = 0x45,
+ MAX77843_FG_REG_DPACC = 0x46,
+ MAX77843_FG_REG_OCV = 0xEE,
+ MAX77843_FG_REG_VFOCV = 0xFB,
+ MAX77843_FG_SOCVF = 0xFF,
+
+ MAX77843_FG_END,
+};
+
+/* MUIC registers */
+enum max77843_muic_reg {
+ MAX77843_MUIC_REG_ID = 0x00,
+ MAX77843_MUIC_REG_INT1 = 0x01,
+ MAX77843_MUIC_REG_INT2 = 0x02,
+ MAX77843_MUIC_REG_INT3 = 0x03,
+ MAX77843_MUIC_REG_STATUS1 = 0x04,
+ MAX77843_MUIC_REG_STATUS2 = 0x05,
+ MAX77843_MUIC_REG_STATUS3 = 0x06,
+ MAX77843_MUIC_REG_INTMASK1 = 0x07,
+ MAX77843_MUIC_REG_INTMASK2 = 0x08,
+ MAX77843_MUIC_REG_INTMASK3 = 0x09,
+ MAX77843_MUIC_REG_CDETCTRL1 = 0x0A,
+ MAX77843_MUIC_REG_CDETCTRL2 = 0x0B,
+ MAX77843_MUIC_REG_CONTROL1 = 0x0C,
+ MAX77843_MUIC_REG_CONTROL2 = 0x0D,
+ MAX77843_MUIC_REG_CONTROL3 = 0x0E,
+ MAX77843_MUIC_REG_CONTROL4 = 0x16,
+ MAX77843_MUIC_REG_HVCONTROL1 = 0x17,
+ MAX77843_MUIC_REG_HVCONTROL2 = 0x18,
+
+ MAX77843_MUIC_REG_END,
+};
+
+enum max77843_irq {
+ /* Topsys: SYSTEM */
+ MAX77843_SYS_IRQ_SYSINTSRC_SYSUVLO_INT,
+ MAX77843_SYS_IRQ_SYSINTSRC_SYSOVLO_INT,
+ MAX77843_SYS_IRQ_SYSINTSRC_TSHDN_INT,
+ MAX77843_SYS_IRQ_SYSINTSRC_TM_INT,
+
+ /* Charger: CHG_INT */
+ MAX77843_CHG_IRQ_CHG_INT_BYP_I,
+ MAX77843_CHG_IRQ_CHG_INT_BATP_I,
+ MAX77843_CHG_IRQ_CHG_INT_BAT_I,
+ MAX77843_CHG_IRQ_CHG_INT_CHG_I,
+ MAX77843_CHG_IRQ_CHG_INT_WCIN_I,
+ MAX77843_CHG_IRQ_CHG_INT_CHGIN_I,
+ MAX77843_CHG_IRQ_CHG_INT_AICL_I,
+
+ MAX77843_IRQ_NUM,
+};
+
+enum max77843_irq_muic {
+ /* MUIC: INT1 */
+ MAX77843_MUIC_IRQ_INT1_ADC,
+ MAX77843_MUIC_IRQ_INT1_ADCERROR,
+ MAX77843_MUIC_IRQ_INT1_ADC1K,
+
+ /* MUIC: INT2 */
+ MAX77843_MUIC_IRQ_INT2_CHGTYP,
+ MAX77843_MUIC_IRQ_INT2_CHGDETRUN,
+ MAX77843_MUIC_IRQ_INT2_DCDTMR,
+ MAX77843_MUIC_IRQ_INT2_DXOVP,
+ MAX77843_MUIC_IRQ_INT2_VBVOLT,
+
+ /* MUIC: INT3 */
+ MAX77843_MUIC_IRQ_INT3_VBADC,
+ MAX77843_MUIC_IRQ_INT3_VDNMON,
+ MAX77843_MUIC_IRQ_INT3_DNRES,
+ MAX77843_MUIC_IRQ_INT3_MPNACK,
+ MAX77843_MUIC_IRQ_INT3_MRXBUFOW,
+ MAX77843_MUIC_IRQ_INT3_MRXTRF,
+ MAX77843_MUIC_IRQ_INT3_MRXPERR,
+ MAX77843_MUIC_IRQ_INT3_MRXRDY,
+
+ MAX77843_MUIC_IRQ_NUM,
+};
+
+/* MAX77843 interrupts */
+#define MAX77843_SYS_IRQ_SYSUVLO_INT BIT(0)
+#define MAX77843_SYS_IRQ_SYSOVLO_INT BIT(1)
+#define MAX77843_SYS_IRQ_TSHDN_INT BIT(2)
+#define MAX77843_SYS_IRQ_TM_INT BIT(3)
+
+/* MAX77843 MAINCTRL1 register */
+#define MAINCTRL1_BIASEN_SHIFT 7
+#define MAX77843_MAINCTRL1_BIASEN_MASK BIT(MAINCTRL1_BIASEN_SHIFT)
+
+/* MAX77843 MCONFIG register */
+#define MCONFIG_MODE_SHIFT 7
+#define MCONFIG_MEN_SHIFT 6
+#define MCONFIG_PDIV_SHIFT 0
+
+#define MAX77843_MCONFIG_MODE_MASK BIT(MCONFIG_MODE_SHIFT)
+#define MAX77843_MCONFIG_MEN_MASK BIT(MCONFIG_MEN_SHIFT)
+#define MAX77843_MCONFIG_PDIV_MASK (0x3 << MCONFIG_PDIV_SHIFT)
+
+/* Max77843 charger insterrupts */
+#define MAX77843_CHG_BYP_I BIT(0)
+#define MAX77843_CHG_BATP_I BIT(2)
+#define MAX77843_CHG_BAT_I BIT(3)
+#define MAX77843_CHG_CHG_I BIT(4)
+#define MAX77843_CHG_WCIN_I BIT(5)
+#define MAX77843_CHG_CHGIN_I BIT(6)
+#define MAX77843_CHG_AICL_I BIT(7)
+
+/* MAX77843 CHG_INT_OK register */
+#define MAX77843_CHG_BYP_OK BIT(0)
+#define MAX77843_CHG_BATP_OK BIT(2)
+#define MAX77843_CHG_BAT_OK BIT(3)
+#define MAX77843_CHG_CHG_OK BIT(4)
+#define MAX77843_CHG_WCIN_OK BIT(5)
+#define MAX77843_CHG_CHGIN_OK BIT(6)
+#define MAX77843_CHG_AICL_OK BIT(7)
+
+/* MAX77843 CHG_DETAILS_00 register */
+#define MAX77843_CHG_BAT_DTLS BIT(0)
+
+/* MAX77843 CHG_DETAILS_01 register */
+#define MAX77843_CHG_DTLS_MASK 0x0f
+#define MAX77843_CHG_PQ_MODE 0x00
+#define MAX77843_CHG_CC_MODE 0x01
+#define MAX77843_CHG_CV_MODE 0x02
+#define MAX77843_CHG_TO_MODE 0x03
+#define MAX77843_CHG_DO_MODE 0x04
+#define MAX77843_CHG_HT_MODE 0x05
+#define MAX77843_CHG_TF_MODE 0x06
+#define MAX77843_CHG_TS_MODE 0x07
+#define MAX77843_CHG_OFF_MODE 0x08
+
+#define MAX77843_CHG_BAT_DTLS_MASK 0xf0
+#define MAX77843_CHG_NO_BAT (0x00 << 4)
+#define MAX77843_CHG_LOW_VOLT_BAT (0x01 << 4)
+#define MAX77843_CHG_LONG_BAT_TIME (0x02 << 4)
+#define MAX77843_CHG_OK_BAT (0x03 << 4)
+#define MAX77843_CHG_OK_LOW_VOLT_BAT (0x04 << 4)
+#define MAX77843_CHG_OVER_VOLT_BAT (0x05 << 4)
+#define MAX77843_CHG_OVER_CURRENT_BAT (0x06 << 4)
+
+/* MAX77843 CHG_CNFG_00 register */
+#define MAX77843_CHG_DISABLE 0x00
+#define MAX77843_CHG_ENABLE 0x05
+#define MAX77843_CHG_MASK 0x01
+#define MAX77843_CHG_BUCK_MASK 0x04
+
+/* MAX77843 CHG_CNFG_01 register */
+#define MAX77843_CHG_RESTART_THRESHOLD_100 0x00
+#define MAX77843_CHG_RESTART_THRESHOLD_150 0x10
+#define MAX77843_CHG_RESTART_THRESHOLD_200 0x20
+#define MAX77843_CHG_RESTART_THRESHOLD_DISABLE 0x30
+
+/* MAX77843 CHG_CNFG_02 register */
+#define MAX77843_CHG_FAST_CHG_CURRENT_MIN 100000
+#define MAX77843_CHG_FAST_CHG_CURRENT_MAX 3150000
+#define MAX77843_CHG_FAST_CHG_CURRENT_STEP 50000
+#define MAX77843_CHG_FAST_CHG_CURRENT_MASK 0x3f
+#define MAX77843_CHG_OTG_ILIMIT_500 (0x00 << 6)
+#define MAX77843_CHG_OTG_ILIMIT_900 (0x01 << 6)
+#define MAX77843_CHG_OTG_ILIMIT_1200 (0x02 << 6)
+#define MAX77843_CHG_OTG_ILIMIT_1500 (0x03 << 6)
+#define MAX77843_CHG_OTG_ILIMIT_MASK 0xc0
+
+/* MAX77843 CHG_CNFG_03 register */
+#define MAX77843_CHG_TOP_OFF_CURRENT_MIN 125000
+#define MAX77843_CHG_TOP_OFF_CURRENT_MAX 650000
+#define MAX77843_CHG_TOP_OFF_CURRENT_STEP 75000
+#define MAX77843_CHG_TOP_OFF_CURRENT_MASK 0x07
+
+/* MAX77843 CHG_CNFG_06 register */
+#define MAX77843_CHG_WRITE_CAP_BLOCK 0x10
+#define MAX77843_CHG_WRITE_CAP_UNBLOCK 0x0C
+
+/* MAX77843_CHG_CNFG_09_register */
+#define MAX77843_CHG_INPUT_CURRENT_LIMIT_MIN 100000
+#define MAX77843_CHG_INPUT_CURRENT_LIMIT_MAX 4000000
+#define MAX77843_CHG_INPUT_CURRENT_LIMIT_REF 3367000
+#define MAX77843_CHG_INPUT_CURRENT_LIMIT_STEP 33000
+
+#define MAX77843_MUIC_ADC BIT(0)
+#define MAX77843_MUIC_ADCERROR BIT(2)
+#define MAX77843_MUIC_ADC1K BIT(3)
+
+#define MAX77843_MUIC_CHGTYP BIT(0)
+#define MAX77843_MUIC_CHGDETRUN BIT(1)
+#define MAX77843_MUIC_DCDTMR BIT(2)
+#define MAX77843_MUIC_DXOVP BIT(3)
+#define MAX77843_MUIC_VBVOLT BIT(4)
+
+#define MAX77843_MUIC_VBADC BIT(0)
+#define MAX77843_MUIC_VDNMON BIT(1)
+#define MAX77843_MUIC_DNRES BIT(2)
+#define MAX77843_MUIC_MPNACK BIT(3)
+#define MAX77843_MUIC_MRXBUFOW BIT(4)
+#define MAX77843_MUIC_MRXTRF BIT(5)
+#define MAX77843_MUIC_MRXPERR BIT(6)
+#define MAX77843_MUIC_MRXRDY BIT(7)
+
+/* MAX77843 INTSRCMASK register */
+#define MAX77843_INTSRCMASK_CHGR 0
+#define MAX77843_INTSRCMASK_SYS 1
+#define MAX77843_INTSRCMASK_FG 2
+#define MAX77843_INTSRCMASK_MUIC 3
+
+#define MAX77843_INTSRCMASK_CHGR_MASK BIT(MAX77843_INTSRCMASK_CHGR)
+#define MAX77843_INTSRCMASK_SYS_MASK BIT(MAX77843_INTSRCMASK_SYS)
+#define MAX77843_INTSRCMASK_FG_MASK BIT(MAX77843_INTSRCMASK_FG)
+#define MAX77843_INTSRCMASK_MUIC_MASK BIT(MAX77843_INTSRCMASK_MUIC)
+
+#define MAX77843_INTSRC_MASK_MASK \
+ (MAX77843_INTSRCMASK_MUIC_MASK | MAX77843_INTSRCMASK_FG_MASK | \
+ MAX77843_INTSRCMASK_SYS_MASK | MAX77843_INTSRCMASK_CHGR_MASK)
+
+/* MAX77843 STATUS register*/
+#define STATUS1_ADC_SHIFT 0
+#define STATUS1_ADCERROR_SHIFT 6
+#define STATUS1_ADC1K_SHIFT 7
+#define STATUS2_CHGTYP_SHIFT 0
+#define STATUS2_CHGDETRUN_SHIFT 3
+#define STATUS2_DCDTMR_SHIFT 4
+#define STATUS2_DXOVP_SHIFT 5
+#define STATUS2_VBVOLT_SHIFT 6
+#define STATUS3_VBADC_SHIFT 0
+#define STATUS3_VDNMON_SHIFT 4
+#define STATUS3_DNRES_SHIFT 5
+#define STATUS3_MPNACK_SHIFT 6
+
+#define MAX77843_MUIC_STATUS1_ADC_MASK (0x1f << STATUS1_ADC_SHIFT)
+#define MAX77843_MUIC_STATUS1_ADCERROR_MASK BIT(STATUS1_ADCERROR_SHIFT)
+#define MAX77843_MUIC_STATUS1_ADC1K_MASK BIT(STATUS1_ADC1K_SHIFT)
+#define MAX77843_MUIC_STATUS2_CHGTYP_MASK (0x7 << STATUS2_CHGTYP_SHIFT)
+#define MAX77843_MUIC_STATUS2_CHGDETRUN_MASK BIT(STATUS2_CHGDETRUN_SHIFT)
+#define MAX77843_MUIC_STATUS2_DCDTMR_MASK BIT(STATUS2_DCDTMR_SHIFT)
+#define MAX77843_MUIC_STATUS2_DXOVP_MASK BIT(STATUS2_DXOVP_SHIFT)
+#define MAX77843_MUIC_STATUS2_VBVOLT_MASK BIT(STATUS2_VBVOLT_SHIFT)
+#define MAX77843_MUIC_STATUS3_VBADC_MASK (0xf << STATUS3_VBADC_SHIFT)
+#define MAX77843_MUIC_STATUS3_VDNMON_MASK BIT(STATUS3_VDNMON_SHIFT)
+#define MAX77843_MUIC_STATUS3_DNRES_MASK BIT(STATUS3_DNRES_SHIFT)
+#define MAX77843_MUIC_STATUS3_MPNACK_MASK BIT(STATUS3_MPNACK_SHIFT)
+
+/* MAX77843 CONTROL register */
+#define CONTROL1_COMP1SW_SHIFT 0
+#define CONTROL1_COMP2SW_SHIFT 3
+#define CONTROL1_IDBEN_SHIFT 7
+#define CONTROL2_LOWPWR_SHIFT 0
+#define CONTROL2_ADCEN_SHIFT 1
+#define CONTROL2_CPEN_SHIFT 2
+#define CONTROL2_ACC_DET_SHIFT 5
+#define CONTROL2_USBCPINT_SHIFT 6
+#define CONTROL2_RCPS_SHIFT 7
+#define CONTROL3_JIGSET_SHIFT 0
+#define CONTROL4_ADCDBSET_SHIFT 0
+#define CONTROL4_USBAUTO_SHIFT 4
+#define CONTROL4_FCTAUTO_SHIFT 5
+#define CONTROL4_ADCMODE_SHIFT 6
+
+#define MAX77843_MUIC_CONTROL1_COMP1SW_MASK (0x7 << CONTROL1_COMP1SW_SHIFT)
+#define MAX77843_MUIC_CONTROL1_COMP2SW_MASK (0x7 << CONTROL1_COMP2SW_SHIFT)
+#define MAX77843_MUIC_CONTROL1_IDBEN_MASK BIT(CONTROL1_IDBEN_SHIFT)
+#define MAX77843_MUIC_CONTROL2_LOWPWR_MASK BIT(CONTROL2_LOWPWR_SHIFT)
+#define MAX77843_MUIC_CONTROL2_ADCEN_MASK BIT(CONTROL2_ADCEN_SHIFT)
+#define MAX77843_MUIC_CONTROL2_CPEN_MASK BIT(CONTROL2_CPEN_SHIFT)
+#define MAX77843_MUIC_CONTROL2_ACC_DET_MASK BIT(CONTROL2_ACC_DET_SHIFT)
+#define MAX77843_MUIC_CONTROL2_USBCPINT_MASK BIT(CONTROL2_USBCPINT_SHIFT)
+#define MAX77843_MUIC_CONTROL2_RCPS_MASK BIT(CONTROL2_RCPS_SHIFT)
+#define MAX77843_MUIC_CONTROL3_JIGSET_MASK (0x3 << CONTROL3_JIGSET_SHIFT)
+#define MAX77843_MUIC_CONTROL4_ADCDBSET_MASK (0x3 << CONTROL4_ADCDBSET_SHIFT)
+#define MAX77843_MUIC_CONTROL4_USBAUTO_MASK BIT(CONTROL4_USBAUTO_SHIFT)
+#define MAX77843_MUIC_CONTROL4_FCTAUTO_MASK BIT(CONTROL4_FCTAUTO_SHIFT)
+#define MAX77843_MUIC_CONTROL4_ADCMODE_MASK (0x3 << CONTROL4_ADCMODE_SHIFT)
+
+/* MAX77843 switch port */
+#define COM_OPEN 0
+#define COM_USB 1
+#define COM_AUDIO 2
+#define COM_UART 3
+#define COM_AUX_USB 4
+#define COM_AUX_UART 5
+
+#define CONTROL1_COM_SW \
+ ((MAX77843_MUIC_CONTROL1_COMP1SW_MASK | \
+ MAX77843_MUIC_CONTROL1_COMP2SW_MASK))
+
+#define CONTROL1_SW_OPEN \
+ ((COM_OPEN << CONTROL1_COMP1SW_SHIFT | \
+ COM_OPEN << CONTROL1_COMP2SW_SHIFT))
+#define CONTROL1_SW_USB \
+ ((COM_USB << CONTROL1_COMP1SW_SHIFT | \
+ COM_USB << CONTROL1_COMP2SW_SHIFT))
+#define CONTROL1_SW_AUDIO \
+ ((COM_AUDIO << CONTROL1_COMP1SW_SHIFT | \
+ COM_AUDIO << CONTROL1_COMP2SW_SHIFT))
+#define CONTROL1_SW_UART \
+ ((COM_UART << CONTROL1_COMP1SW_SHIFT | \
+ COM_UART << CONTROL1_COMP2SW_SHIFT))
+#define CONTROL1_SW_AUX_USB \
+ ((COM_AUX_USB << CONTROL1_COMP1SW_SHIFT | \
+ COM_AUX_USB << CONTROL1_COMP2SW_SHIFT))
+#define CONTROL1_SW_AUX_UART \
+ ((COM_AUX_UART << CONTROL1_COMP1SW_SHIFT | \
+ COM_AUX_UART << CONTROL1_COMP2SW_SHIFT))
+
+#define MAX77843_DISABLE 0
+#define MAX77843_ENABLE 1
+
+#define CONTROL4_AUTO_DISABLE \
+ ((MAX77843_DISABLE << CONTROL4_USBAUTO_SHIFT) | \
+ (MAX77843_DISABLE << CONTROL4_FCTAUTO_SHIFT))
+#define CONTROL4_AUTO_ENABLE \
+ ((MAX77843_ENABLE << CONTROL4_USBAUTO_SHIFT) | \
+ (MAX77843_ENABLE << CONTROL4_FCTAUTO_SHIFT))
+
+/* MAX77843 SAFEOUT LDO Control register */
+#define SAFEOUTCTRL_SAFEOUT1_SHIFT 0
+#define SAFEOUTCTRL_SAFEOUT2_SHIFT 2
+#define SAFEOUTCTRL_ENSAFEOUT1_SHIFT 6
+#define SAFEOUTCTRL_ENSAFEOUT2_SHIFT 7
+
+#define MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT1 \
+ BIT(SAFEOUTCTRL_ENSAFEOUT1_SHIFT)
+#define MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT2 \
+ BIT(SAFEOUTCTRL_ENSAFEOUT2_SHIFT)
+#define MAX77843_REG_SAFEOUTCTRL_SAFEOUT1_MASK \
+ (0x3 << SAFEOUTCTRL_SAFEOUT1_SHIFT)
+#define MAX77843_REG_SAFEOUTCTRL_SAFEOUT2_MASK \
+ (0x3 << SAFEOUTCTRL_SAFEOUT2_SHIFT)
+
+struct max77843 {
+ struct device *dev;
+
+ struct i2c_client *i2c;
+ struct i2c_client *i2c_chg;
+ struct i2c_client *i2c_fuel;
+ struct i2c_client *i2c_muic;
+
+ struct regmap *regmap;
+ struct regmap *regmap_chg;
+ struct regmap *regmap_fuel;
+ struct regmap *regmap_muic;
+
+ struct regmap_irq_chip_data *irq_data;
+ struct regmap_irq_chip_data *irq_data_chg;
+ struct regmap_irq_chip_data *irq_data_fuel;
+ struct regmap_irq_chip_data *irq_data_muic;
+
+ int irq;
+};
+#endif /* __MAX77843_H__ */
diff --git a/include/linux/mfd/menelaus.h b/include/linux/mfd/menelaus.h
index f097e89134cb..9e85ac06da89 100644
--- a/include/linux/mfd/menelaus.h
+++ b/include/linux/mfd/menelaus.h
@@ -24,7 +24,6 @@ extern int menelaus_set_vaux(unsigned int mV);
extern int menelaus_set_vdcdc(int dcdc, unsigned int mV);
extern int menelaus_set_slot_sel(int enable);
extern int menelaus_get_slot_pin_states(void);
-extern int menelaus_set_vcore_sw(unsigned int mV);
extern int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV);
#define EN_VPLL_SLEEP (1 << 7)
@@ -38,10 +37,4 @@ extern int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV);
extern int menelaus_set_regulator_sleep(int enable, u32 val);
-#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_MENELAUS)
-#define omap_has_menelaus() 1
-#else
-#define omap_has_menelaus() 0
-#endif
-
#endif
diff --git a/include/linux/mfd/mt6397/core.h b/include/linux/mfd/mt6397/core.h
new file mode 100644
index 000000000000..cf5265b0d1c1
--- /dev/null
+++ b/include/linux/mfd/mt6397/core.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Flora Fu, MediaTek
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MFD_MT6397_CORE_H__
+#define __MFD_MT6397_CORE_H__
+
+enum mt6397_irq_numbers {
+ MT6397_IRQ_SPKL_AB = 0,
+ MT6397_IRQ_SPKR_AB,
+ MT6397_IRQ_SPKL,
+ MT6397_IRQ_SPKR,
+ MT6397_IRQ_BAT_L,
+ MT6397_IRQ_BAT_H,
+ MT6397_IRQ_FG_BAT_L,
+ MT6397_IRQ_FG_BAT_H,
+ MT6397_IRQ_WATCHDOG,
+ MT6397_IRQ_PWRKEY,
+ MT6397_IRQ_THR_L,
+ MT6397_IRQ_THR_H,
+ MT6397_IRQ_VBATON_UNDET,
+ MT6397_IRQ_BVALID_DET,
+ MT6397_IRQ_CHRDET,
+ MT6397_IRQ_OV,
+ MT6397_IRQ_LDO,
+ MT6397_IRQ_HOMEKEY,
+ MT6397_IRQ_ACCDET,
+ MT6397_IRQ_AUDIO,
+ MT6397_IRQ_RTC,
+ MT6397_IRQ_PWRKEY_RSTB,
+ MT6397_IRQ_HDMI_SIFM,
+ MT6397_IRQ_HDMI_CEC,
+ MT6397_IRQ_VCA15,
+ MT6397_IRQ_VSRMCA15,
+ MT6397_IRQ_VCORE,
+ MT6397_IRQ_VGPU,
+ MT6397_IRQ_VIO18,
+ MT6397_IRQ_VPCA7,
+ MT6397_IRQ_VSRMCA7,
+ MT6397_IRQ_VDRM,
+ MT6397_IRQ_NR,
+};
+
+struct mt6397_chip {
+ struct device *dev;
+ struct regmap *regmap;
+ int irq;
+ struct irq_domain *irq_domain;
+ struct mutex irqlock;
+ u16 irq_masks_cur[2];
+ u16 irq_masks_cache[2];
+};
+
+#endif /* __MFD_MT6397_CORE_H__ */
diff --git a/include/linux/mfd/mt6397/registers.h b/include/linux/mfd/mt6397/registers.h
new file mode 100644
index 000000000000..f23a0a60a877
--- /dev/null
+++ b/include/linux/mfd/mt6397/registers.h
@@ -0,0 +1,362 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Flora Fu, MediaTek
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MFD_MT6397_REGISTERS_H__
+#define __MFD_MT6397_REGISTERS_H__
+
+/* PMIC Registers */
+#define MT6397_CID 0x0100
+#define MT6397_TOP_CKPDN 0x0102
+#define MT6397_TOP_CKPDN_SET 0x0104
+#define MT6397_TOP_CKPDN_CLR 0x0106
+#define MT6397_TOP_CKPDN2 0x0108
+#define MT6397_TOP_CKPDN2_SET 0x010A
+#define MT6397_TOP_CKPDN2_CLR 0x010C
+#define MT6397_TOP_GPIO_CKPDN 0x010E
+#define MT6397_TOP_RST_CON 0x0114
+#define MT6397_WRP_CKPDN 0x011A
+#define MT6397_WRP_RST_CON 0x0120
+#define MT6397_TOP_RST_MISC 0x0126
+#define MT6397_TOP_CKCON1 0x0128
+#define MT6397_TOP_CKCON2 0x012A
+#define MT6397_TOP_CKTST1 0x012C
+#define MT6397_TOP_CKTST2 0x012E
+#define MT6397_OC_DEG_EN 0x0130
+#define MT6397_OC_CTL0 0x0132
+#define MT6397_OC_CTL1 0x0134
+#define MT6397_OC_CTL2 0x0136
+#define MT6397_INT_RSV 0x0138
+#define MT6397_TEST_CON0 0x013A
+#define MT6397_TEST_CON1 0x013C
+#define MT6397_STATUS0 0x013E
+#define MT6397_STATUS1 0x0140
+#define MT6397_PGSTATUS 0x0142
+#define MT6397_CHRSTATUS 0x0144
+#define MT6397_OCSTATUS0 0x0146
+#define MT6397_OCSTATUS1 0x0148
+#define MT6397_OCSTATUS2 0x014A
+#define MT6397_HDMI_PAD_IE 0x014C
+#define MT6397_TEST_OUT_L 0x014E
+#define MT6397_TEST_OUT_H 0x0150
+#define MT6397_TDSEL_CON 0x0152
+#define MT6397_RDSEL_CON 0x0154
+#define MT6397_GPIO_SMT_CON0 0x0156
+#define MT6397_GPIO_SMT_CON1 0x0158
+#define MT6397_GPIO_SMT_CON2 0x015A
+#define MT6397_GPIO_SMT_CON3 0x015C
+#define MT6397_DRV_CON0 0x015E
+#define MT6397_DRV_CON1 0x0160
+#define MT6397_DRV_CON2 0x0162
+#define MT6397_DRV_CON3 0x0164
+#define MT6397_DRV_CON4 0x0166
+#define MT6397_DRV_CON5 0x0168
+#define MT6397_DRV_CON6 0x016A
+#define MT6397_DRV_CON7 0x016C
+#define MT6397_DRV_CON8 0x016E
+#define MT6397_DRV_CON9 0x0170
+#define MT6397_DRV_CON10 0x0172
+#define MT6397_DRV_CON11 0x0174
+#define MT6397_DRV_CON12 0x0176
+#define MT6397_INT_CON0 0x0178
+#define MT6397_INT_CON1 0x017E
+#define MT6397_INT_STATUS0 0x0184
+#define MT6397_INT_STATUS1 0x0186
+#define MT6397_FQMTR_CON0 0x0188
+#define MT6397_FQMTR_CON1 0x018A
+#define MT6397_FQMTR_CON2 0x018C
+#define MT6397_EFUSE_DOUT_0_15 0x01C4
+#define MT6397_EFUSE_DOUT_16_31 0x01C6
+#define MT6397_EFUSE_DOUT_32_47 0x01C8
+#define MT6397_EFUSE_DOUT_48_63 0x01CA
+#define MT6397_SPI_CON 0x01CC
+#define MT6397_TOP_CKPDN3 0x01CE
+#define MT6397_TOP_CKCON3 0x01D4
+#define MT6397_EFUSE_DOUT_64_79 0x01D6
+#define MT6397_EFUSE_DOUT_80_95 0x01D8
+#define MT6397_EFUSE_DOUT_96_111 0x01DA
+#define MT6397_EFUSE_DOUT_112_127 0x01DC
+#define MT6397_EFUSE_DOUT_128_143 0x01DE
+#define MT6397_EFUSE_DOUT_144_159 0x01E0
+#define MT6397_EFUSE_DOUT_160_175 0x01E2
+#define MT6397_EFUSE_DOUT_176_191 0x01E4
+#define MT6397_EFUSE_DOUT_192_207 0x01E6
+#define MT6397_EFUSE_DOUT_208_223 0x01E8
+#define MT6397_EFUSE_DOUT_224_239 0x01EA
+#define MT6397_EFUSE_DOUT_240_255 0x01EC
+#define MT6397_EFUSE_DOUT_256_271 0x01EE
+#define MT6397_EFUSE_DOUT_272_287 0x01F0
+#define MT6397_EFUSE_DOUT_288_300 0x01F2
+#define MT6397_EFUSE_DOUT_304_319 0x01F4
+#define MT6397_BUCK_CON0 0x0200
+#define MT6397_BUCK_CON1 0x0202
+#define MT6397_BUCK_CON2 0x0204
+#define MT6397_BUCK_CON3 0x0206
+#define MT6397_BUCK_CON4 0x0208
+#define MT6397_BUCK_CON5 0x020A
+#define MT6397_BUCK_CON6 0x020C
+#define MT6397_BUCK_CON7 0x020E
+#define MT6397_BUCK_CON8 0x0210
+#define MT6397_BUCK_CON9 0x0212
+#define MT6397_VCA15_CON0 0x0214
+#define MT6397_VCA15_CON1 0x0216
+#define MT6397_VCA15_CON2 0x0218
+#define MT6397_VCA15_CON3 0x021A
+#define MT6397_VCA15_CON4 0x021C
+#define MT6397_VCA15_CON5 0x021E
+#define MT6397_VCA15_CON6 0x0220
+#define MT6397_VCA15_CON7 0x0222
+#define MT6397_VCA15_CON8 0x0224
+#define MT6397_VCA15_CON9 0x0226
+#define MT6397_VCA15_CON10 0x0228
+#define MT6397_VCA15_CON11 0x022A
+#define MT6397_VCA15_CON12 0x022C
+#define MT6397_VCA15_CON13 0x022E
+#define MT6397_VCA15_CON14 0x0230
+#define MT6397_VCA15_CON15 0x0232
+#define MT6397_VCA15_CON16 0x0234
+#define MT6397_VCA15_CON17 0x0236
+#define MT6397_VCA15_CON18 0x0238
+#define MT6397_VSRMCA15_CON0 0x023A
+#define MT6397_VSRMCA15_CON1 0x023C
+#define MT6397_VSRMCA15_CON2 0x023E
+#define MT6397_VSRMCA15_CON3 0x0240
+#define MT6397_VSRMCA15_CON4 0x0242
+#define MT6397_VSRMCA15_CON5 0x0244
+#define MT6397_VSRMCA15_CON6 0x0246
+#define MT6397_VSRMCA15_CON7 0x0248
+#define MT6397_VSRMCA15_CON8 0x024A
+#define MT6397_VSRMCA15_CON9 0x024C
+#define MT6397_VSRMCA15_CON10 0x024E
+#define MT6397_VSRMCA15_CON11 0x0250
+#define MT6397_VSRMCA15_CON12 0x0252
+#define MT6397_VSRMCA15_CON13 0x0254
+#define MT6397_VSRMCA15_CON14 0x0256
+#define MT6397_VSRMCA15_CON15 0x0258
+#define MT6397_VSRMCA15_CON16 0x025A
+#define MT6397_VSRMCA15_CON17 0x025C
+#define MT6397_VSRMCA15_CON18 0x025E
+#define MT6397_VSRMCA15_CON19 0x0260
+#define MT6397_VSRMCA15_CON20 0x0262
+#define MT6397_VSRMCA15_CON21 0x0264
+#define MT6397_VCORE_CON0 0x0266
+#define MT6397_VCORE_CON1 0x0268
+#define MT6397_VCORE_CON2 0x026A
+#define MT6397_VCORE_CON3 0x026C
+#define MT6397_VCORE_CON4 0x026E
+#define MT6397_VCORE_CON5 0x0270
+#define MT6397_VCORE_CON6 0x0272
+#define MT6397_VCORE_CON7 0x0274
+#define MT6397_VCORE_CON8 0x0276
+#define MT6397_VCORE_CON9 0x0278
+#define MT6397_VCORE_CON10 0x027A
+#define MT6397_VCORE_CON11 0x027C
+#define MT6397_VCORE_CON12 0x027E
+#define MT6397_VCORE_CON13 0x0280
+#define MT6397_VCORE_CON14 0x0282
+#define MT6397_VCORE_CON15 0x0284
+#define MT6397_VCORE_CON16 0x0286
+#define MT6397_VCORE_CON17 0x0288
+#define MT6397_VCORE_CON18 0x028A
+#define MT6397_VGPU_CON0 0x028C
+#define MT6397_VGPU_CON1 0x028E
+#define MT6397_VGPU_CON2 0x0290
+#define MT6397_VGPU_CON3 0x0292
+#define MT6397_VGPU_CON4 0x0294
+#define MT6397_VGPU_CON5 0x0296
+#define MT6397_VGPU_CON6 0x0298
+#define MT6397_VGPU_CON7 0x029A
+#define MT6397_VGPU_CON8 0x029C
+#define MT6397_VGPU_CON9 0x029E
+#define MT6397_VGPU_CON10 0x02A0
+#define MT6397_VGPU_CON11 0x02A2
+#define MT6397_VGPU_CON12 0x02A4
+#define MT6397_VGPU_CON13 0x02A6
+#define MT6397_VGPU_CON14 0x02A8
+#define MT6397_VGPU_CON15 0x02AA
+#define MT6397_VGPU_CON16 0x02AC
+#define MT6397_VGPU_CON17 0x02AE
+#define MT6397_VGPU_CON18 0x02B0
+#define MT6397_VIO18_CON0 0x0300
+#define MT6397_VIO18_CON1 0x0302
+#define MT6397_VIO18_CON2 0x0304
+#define MT6397_VIO18_CON3 0x0306
+#define MT6397_VIO18_CON4 0x0308
+#define MT6397_VIO18_CON5 0x030A
+#define MT6397_VIO18_CON6 0x030C
+#define MT6397_VIO18_CON7 0x030E
+#define MT6397_VIO18_CON8 0x0310
+#define MT6397_VIO18_CON9 0x0312
+#define MT6397_VIO18_CON10 0x0314
+#define MT6397_VIO18_CON11 0x0316
+#define MT6397_VIO18_CON12 0x0318
+#define MT6397_VIO18_CON13 0x031A
+#define MT6397_VIO18_CON14 0x031C
+#define MT6397_VIO18_CON15 0x031E
+#define MT6397_VIO18_CON16 0x0320
+#define MT6397_VIO18_CON17 0x0322
+#define MT6397_VIO18_CON18 0x0324
+#define MT6397_VPCA7_CON0 0x0326
+#define MT6397_VPCA7_CON1 0x0328
+#define MT6397_VPCA7_CON2 0x032A
+#define MT6397_VPCA7_CON3 0x032C
+#define MT6397_VPCA7_CON4 0x032E
+#define MT6397_VPCA7_CON5 0x0330
+#define MT6397_VPCA7_CON6 0x0332
+#define MT6397_VPCA7_CON7 0x0334
+#define MT6397_VPCA7_CON8 0x0336
+#define MT6397_VPCA7_CON9 0x0338
+#define MT6397_VPCA7_CON10 0x033A
+#define MT6397_VPCA7_CON11 0x033C
+#define MT6397_VPCA7_CON12 0x033E
+#define MT6397_VPCA7_CON13 0x0340
+#define MT6397_VPCA7_CON14 0x0342
+#define MT6397_VPCA7_CON15 0x0344
+#define MT6397_VPCA7_CON16 0x0346
+#define MT6397_VPCA7_CON17 0x0348
+#define MT6397_VPCA7_CON18 0x034A
+#define MT6397_VSRMCA7_CON0 0x034C
+#define MT6397_VSRMCA7_CON1 0x034E
+#define MT6397_VSRMCA7_CON2 0x0350
+#define MT6397_VSRMCA7_CON3 0x0352
+#define MT6397_VSRMCA7_CON4 0x0354
+#define MT6397_VSRMCA7_CON5 0x0356
+#define MT6397_VSRMCA7_CON6 0x0358
+#define MT6397_VSRMCA7_CON7 0x035A
+#define MT6397_VSRMCA7_CON8 0x035C
+#define MT6397_VSRMCA7_CON9 0x035E
+#define MT6397_VSRMCA7_CON10 0x0360
+#define MT6397_VSRMCA7_CON11 0x0362
+#define MT6397_VSRMCA7_CON12 0x0364
+#define MT6397_VSRMCA7_CON13 0x0366
+#define MT6397_VSRMCA7_CON14 0x0368
+#define MT6397_VSRMCA7_CON15 0x036A
+#define MT6397_VSRMCA7_CON16 0x036C
+#define MT6397_VSRMCA7_CON17 0x036E
+#define MT6397_VSRMCA7_CON18 0x0370
+#define MT6397_VSRMCA7_CON19 0x0372
+#define MT6397_VSRMCA7_CON20 0x0374
+#define MT6397_VSRMCA7_CON21 0x0376
+#define MT6397_VDRM_CON0 0x0378
+#define MT6397_VDRM_CON1 0x037A
+#define MT6397_VDRM_CON2 0x037C
+#define MT6397_VDRM_CON3 0x037E
+#define MT6397_VDRM_CON4 0x0380
+#define MT6397_VDRM_CON5 0x0382
+#define MT6397_VDRM_CON6 0x0384
+#define MT6397_VDRM_CON7 0x0386
+#define MT6397_VDRM_CON8 0x0388
+#define MT6397_VDRM_CON9 0x038A
+#define MT6397_VDRM_CON10 0x038C
+#define MT6397_VDRM_CON11 0x038E
+#define MT6397_VDRM_CON12 0x0390
+#define MT6397_VDRM_CON13 0x0392
+#define MT6397_VDRM_CON14 0x0394
+#define MT6397_VDRM_CON15 0x0396
+#define MT6397_VDRM_CON16 0x0398
+#define MT6397_VDRM_CON17 0x039A
+#define MT6397_VDRM_CON18 0x039C
+#define MT6397_BUCK_K_CON0 0x039E
+#define MT6397_BUCK_K_CON1 0x03A0
+#define MT6397_ANALDO_CON0 0x0400
+#define MT6397_ANALDO_CON1 0x0402
+#define MT6397_ANALDO_CON2 0x0404
+#define MT6397_ANALDO_CON3 0x0406
+#define MT6397_ANALDO_CON4 0x0408
+#define MT6397_ANALDO_CON5 0x040A
+#define MT6397_ANALDO_CON6 0x040C
+#define MT6397_ANALDO_CON7 0x040E
+#define MT6397_DIGLDO_CON0 0x0410
+#define MT6397_DIGLDO_CON1 0x0412
+#define MT6397_DIGLDO_CON2 0x0414
+#define MT6397_DIGLDO_CON3 0x0416
+#define MT6397_DIGLDO_CON4 0x0418
+#define MT6397_DIGLDO_CON5 0x041A
+#define MT6397_DIGLDO_CON6 0x041C
+#define MT6397_DIGLDO_CON7 0x041E
+#define MT6397_DIGLDO_CON8 0x0420
+#define MT6397_DIGLDO_CON9 0x0422
+#define MT6397_DIGLDO_CON10 0x0424
+#define MT6397_DIGLDO_CON11 0x0426
+#define MT6397_DIGLDO_CON12 0x0428
+#define MT6397_DIGLDO_CON13 0x042A
+#define MT6397_DIGLDO_CON14 0x042C
+#define MT6397_DIGLDO_CON15 0x042E
+#define MT6397_DIGLDO_CON16 0x0430
+#define MT6397_DIGLDO_CON17 0x0432
+#define MT6397_DIGLDO_CON18 0x0434
+#define MT6397_DIGLDO_CON19 0x0436
+#define MT6397_DIGLDO_CON20 0x0438
+#define MT6397_DIGLDO_CON21 0x043A
+#define MT6397_DIGLDO_CON22 0x043C
+#define MT6397_DIGLDO_CON23 0x043E
+#define MT6397_DIGLDO_CON24 0x0440
+#define MT6397_DIGLDO_CON25 0x0442
+#define MT6397_DIGLDO_CON26 0x0444
+#define MT6397_DIGLDO_CON27 0x0446
+#define MT6397_DIGLDO_CON28 0x0448
+#define MT6397_DIGLDO_CON29 0x044A
+#define MT6397_DIGLDO_CON30 0x044C
+#define MT6397_DIGLDO_CON31 0x044E
+#define MT6397_DIGLDO_CON32 0x0450
+#define MT6397_DIGLDO_CON33 0x045A
+#define MT6397_SPK_CON0 0x0600
+#define MT6397_SPK_CON1 0x0602
+#define MT6397_SPK_CON2 0x0604
+#define MT6397_SPK_CON3 0x0606
+#define MT6397_SPK_CON4 0x0608
+#define MT6397_SPK_CON5 0x060A
+#define MT6397_SPK_CON6 0x060C
+#define MT6397_SPK_CON7 0x060E
+#define MT6397_SPK_CON8 0x0610
+#define MT6397_SPK_CON9 0x0612
+#define MT6397_SPK_CON10 0x0614
+#define MT6397_SPK_CON11 0x0616
+#define MT6397_AUDDAC_CON0 0x0700
+#define MT6397_AUDBUF_CFG0 0x0702
+#define MT6397_AUDBUF_CFG1 0x0704
+#define MT6397_AUDBUF_CFG2 0x0706
+#define MT6397_AUDBUF_CFG3 0x0708
+#define MT6397_AUDBUF_CFG4 0x070A
+#define MT6397_IBIASDIST_CFG0 0x070C
+#define MT6397_AUDACCDEPOP_CFG0 0x070E
+#define MT6397_AUD_IV_CFG0 0x0710
+#define MT6397_AUDCLKGEN_CFG0 0x0712
+#define MT6397_AUDLDO_CFG0 0x0714
+#define MT6397_AUDLDO_CFG1 0x0716
+#define MT6397_AUDNVREGGLB_CFG0 0x0718
+#define MT6397_AUD_NCP0 0x071A
+#define MT6397_AUDPREAMP_CON0 0x071C
+#define MT6397_AUDADC_CON0 0x071E
+#define MT6397_AUDADC_CON1 0x0720
+#define MT6397_AUDADC_CON2 0x0722
+#define MT6397_AUDADC_CON3 0x0724
+#define MT6397_AUDADC_CON4 0x0726
+#define MT6397_AUDADC_CON5 0x0728
+#define MT6397_AUDADC_CON6 0x072A
+#define MT6397_AUDDIGMI_CON0 0x072C
+#define MT6397_AUDLSBUF_CON0 0x072E
+#define MT6397_AUDLSBUF_CON1 0x0730
+#define MT6397_AUDENCSPARE_CON0 0x0732
+#define MT6397_AUDENCCLKSQ_CON0 0x0734
+#define MT6397_AUDPREAMPGAIN_CON0 0x0736
+#define MT6397_ZCD_CON0 0x0738
+#define MT6397_ZCD_CON1 0x073A
+#define MT6397_ZCD_CON2 0x073C
+#define MT6397_ZCD_CON3 0x073E
+#define MT6397_ZCD_CON4 0x0740
+#define MT6397_ZCD_CON5 0x0742
+#define MT6397_NCP_CLKDIV_CON0 0x0744
+#define MT6397_NCP_CLKDIV_CON1 0x0746
+
+#endif /* __MFD_MT6397_REGISTERS_H__ */
diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
index fb09312d854b..441b6ee72691 100644
--- a/include/linux/mfd/rk808.h
+++ b/include/linux/mfd/rk808.h
@@ -156,6 +156,9 @@ enum rk808_reg {
#define BUCK2_RATE_MASK (3 << 3)
#define MASK_ALL 0xff
+#define BUCK_UV_ACT_MASK 0x0f
+#define BUCK_UV_ACT_DISABLE 0
+
#define SWITCH2_EN BIT(6)
#define SWITCH1_EN BIT(5)
#define DEV_OFF_RST BIT(3)
diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
index 0c12628e91c6..ff843e7ca23d 100644
--- a/include/linux/mfd/rtsx_pci.h
+++ b/include/linux/mfd/rtsx_pci.h
@@ -28,74 +28,72 @@
#define MAX_RW_REG_CNT 1024
-/* PCI Operation Register Address */
#define RTSX_HCBAR 0x00
#define RTSX_HCBCTLR 0x04
+#define STOP_CMD (0x01 << 28)
+#define READ_REG_CMD 0
+#define WRITE_REG_CMD 1
+#define CHECK_REG_CMD 2
+
#define RTSX_HDBAR 0x08
+#define SG_INT 0x04
+#define SG_END 0x02
+#define SG_VALID 0x01
+#define SG_NO_OP 0x00
+#define SG_TRANS_DATA (0x02 << 4)
+#define SG_LINK_DESC (0x03 << 4)
#define RTSX_HDBCTLR 0x0C
+#define SDMA_MODE 0x00
+#define ADMA_MODE (0x02 << 26)
+#define STOP_DMA (0x01 << 28)
+#define TRIG_DMA (0x01 << 31)
+
#define RTSX_HAIMR 0x10
-#define RTSX_BIPR 0x14
-#define RTSX_BIER 0x18
+#define HAIMR_TRANS_START (0x01 << 31)
+#define HAIMR_READ 0x00
+#define HAIMR_WRITE (0x01 << 30)
+#define HAIMR_READ_START (HAIMR_TRANS_START | HAIMR_READ)
+#define HAIMR_WRITE_START (HAIMR_TRANS_START | HAIMR_WRITE)
+#define HAIMR_TRANS_END (HAIMR_TRANS_START)
-/* Host command buffer control register */
-#define STOP_CMD (0x01 << 28)
-
-/* Host data buffer control register */
-#define SDMA_MODE 0x00
-#define ADMA_MODE (0x02 << 26)
-#define STOP_DMA (0x01 << 28)
-#define TRIG_DMA (0x01 << 31)
-
-/* Host access internal memory register */
-#define HAIMR_TRANS_START (0x01 << 31)
-#define HAIMR_READ 0x00
-#define HAIMR_WRITE (0x01 << 30)
-#define HAIMR_READ_START (HAIMR_TRANS_START | HAIMR_READ)
-#define HAIMR_WRITE_START (HAIMR_TRANS_START | HAIMR_WRITE)
-#define HAIMR_TRANS_END (HAIMR_TRANS_START)
-
-/* Bus interrupt pending register */
-#define CMD_DONE_INT (1 << 31)
-#define DATA_DONE_INT (1 << 30)
-#define TRANS_OK_INT (1 << 29)
-#define TRANS_FAIL_INT (1 << 28)
-#define XD_INT (1 << 27)
-#define MS_INT (1 << 26)
-#define SD_INT (1 << 25)
-#define GPIO0_INT (1 << 24)
-#define OC_INT (1 << 23)
-#define SD_WRITE_PROTECT (1 << 19)
-#define XD_EXIST (1 << 18)
-#define MS_EXIST (1 << 17)
-#define SD_EXIST (1 << 16)
-#define DELINK_INT GPIO0_INT
-#define MS_OC_INT (1 << 23)
-#define SD_OC_INT (1 << 22)
+#define RTSX_BIPR 0x14
+#define CMD_DONE_INT (1 << 31)
+#define DATA_DONE_INT (1 << 30)
+#define TRANS_OK_INT (1 << 29)
+#define TRANS_FAIL_INT (1 << 28)
+#define XD_INT (1 << 27)
+#define MS_INT (1 << 26)
+#define SD_INT (1 << 25)
+#define GPIO0_INT (1 << 24)
+#define OC_INT (1 << 23)
+#define SD_WRITE_PROTECT (1 << 19)
+#define XD_EXIST (1 << 18)
+#define MS_EXIST (1 << 17)
+#define SD_EXIST (1 << 16)
+#define DELINK_INT GPIO0_INT
+#define MS_OC_INT (1 << 23)
+#define SD_OC_INT (1 << 22)
#define CARD_INT (XD_INT | MS_INT | SD_INT)
#define NEED_COMPLETE_INT (DATA_DONE_INT | TRANS_OK_INT | TRANS_FAIL_INT)
#define RTSX_INT (CMD_DONE_INT | NEED_COMPLETE_INT | \
CARD_INT | GPIO0_INT | OC_INT)
-
#define CARD_EXIST (XD_EXIST | MS_EXIST | SD_EXIST)
-/* Bus interrupt enable register */
-#define CMD_DONE_INT_EN (1 << 31)
-#define DATA_DONE_INT_EN (1 << 30)
-#define TRANS_OK_INT_EN (1 << 29)
-#define TRANS_FAIL_INT_EN (1 << 28)
-#define XD_INT_EN (1 << 27)
-#define MS_INT_EN (1 << 26)
-#define SD_INT_EN (1 << 25)
-#define GPIO0_INT_EN (1 << 24)
-#define OC_INT_EN (1 << 23)
-#define DELINK_INT_EN GPIO0_INT_EN
-#define MS_OC_INT_EN (1 << 23)
-#define SD_OC_INT_EN (1 << 22)
-
-#define READ_REG_CMD 0
-#define WRITE_REG_CMD 1
-#define CHECK_REG_CMD 2
+#define RTSX_BIER 0x18
+#define CMD_DONE_INT_EN (1 << 31)
+#define DATA_DONE_INT_EN (1 << 30)
+#define TRANS_OK_INT_EN (1 << 29)
+#define TRANS_FAIL_INT_EN (1 << 28)
+#define XD_INT_EN (1 << 27)
+#define MS_INT_EN (1 << 26)
+#define SD_INT_EN (1 << 25)
+#define GPIO0_INT_EN (1 << 24)
+#define OC_INT_EN (1 << 23)
+#define DELINK_INT_EN GPIO0_INT_EN
+#define MS_OC_INT_EN (1 << 23)
+#define SD_OC_INT_EN (1 << 22)
+
/*
* macros for easy use
@@ -125,423 +123,68 @@
#define rtsx_pci_write_config_dword(pcr, where, val) \
pci_write_config_dword((pcr)->pci, where, val)
-#define STATE_TRANS_NONE 0
-#define STATE_TRANS_CMD 1
-#define STATE_TRANS_BUF 2
-#define STATE_TRANS_SG 3
-
-#define TRANS_NOT_READY 0
-#define TRANS_RESULT_OK 1
-#define TRANS_RESULT_FAIL 2
-#define TRANS_NO_DEVICE 3
-
-#define RTSX_RESV_BUF_LEN 4096
-#define HOST_CMDS_BUF_LEN 1024
-#define HOST_SG_TBL_BUF_LEN (RTSX_RESV_BUF_LEN - HOST_CMDS_BUF_LEN)
-#define HOST_SG_TBL_ITEMS (HOST_SG_TBL_BUF_LEN / 8)
-#define MAX_SG_ITEM_LEN 0x80000
-
-#define HOST_TO_DEVICE 0
-#define DEVICE_TO_HOST 1
-
-#define RTSX_PHASE_MAX 32
-#define RX_TUNING_CNT 3
-
-/* SG descriptor */
-#define SG_INT 0x04
-#define SG_END 0x02
-#define SG_VALID 0x01
-
-#define SG_NO_OP 0x00
-#define SG_TRANS_DATA (0x02 << 4)
-#define SG_LINK_DESC (0x03 << 4)
-
-/* Output voltage */
-#define OUTPUT_3V3 0
-#define OUTPUT_1V8 1
-
-/* Card Clock Enable Register */
-#define SD_CLK_EN 0x04
-#define MS_CLK_EN 0x08
-
-/* Card Select Register */
-#define SD_MOD_SEL 2
-#define MS_MOD_SEL 3
-
-/* Card Output Enable Register */
-#define SD_OUTPUT_EN 0x04
-#define MS_OUTPUT_EN 0x08
-
-/* CARD_SHARE_MODE */
-#define CARD_SHARE_MASK 0x0F
-#define CARD_SHARE_MULTI_LUN 0x00
-#define CARD_SHARE_NORMAL 0x00
-#define CARD_SHARE_48_SD 0x04
-#define CARD_SHARE_48_MS 0x08
-/* CARD_SHARE_MODE for barossa */
-#define CARD_SHARE_BAROSSA_SD 0x01
-#define CARD_SHARE_BAROSSA_MS 0x02
-
-/* CARD_DRIVE_SEL */
-#define MS_DRIVE_8mA (0x01 << 6)
-#define MMC_DRIVE_8mA (0x01 << 4)
-#define XD_DRIVE_8mA (0x01 << 2)
-#define GPIO_DRIVE_8mA 0x01
-#define RTS5209_CARD_DRIVE_DEFAULT (MS_DRIVE_8mA | MMC_DRIVE_8mA |\
- XD_DRIVE_8mA | GPIO_DRIVE_8mA)
-#define RTL8411_CARD_DRIVE_DEFAULT (MS_DRIVE_8mA | MMC_DRIVE_8mA |\
- XD_DRIVE_8mA)
-#define RTSX_CARD_DRIVE_DEFAULT (MS_DRIVE_8mA | GPIO_DRIVE_8mA)
+#define STATE_TRANS_NONE 0
+#define STATE_TRANS_CMD 1
+#define STATE_TRANS_BUF 2
+#define STATE_TRANS_SG 3
-/* SD30_DRIVE_SEL */
-#define DRIVER_TYPE_A 0x05
-#define DRIVER_TYPE_B 0x03
-#define DRIVER_TYPE_C 0x02
-#define DRIVER_TYPE_D 0x01
-#define CFG_DRIVER_TYPE_A 0x02
-#define CFG_DRIVER_TYPE_B 0x03
-#define CFG_DRIVER_TYPE_C 0x01
-#define CFG_DRIVER_TYPE_D 0x00
-
-/* FPDCTL */
-#define SSC_POWER_DOWN 0x01
-#define SD_OC_POWER_DOWN 0x02
-#define ALL_POWER_DOWN 0x07
-#define OC_POWER_DOWN 0x06
-
-/* CLK_CTL */
-#define CHANGE_CLK 0x01
-
-/* LDO_CTL */
-#define BPP_ASIC_1V7 0x00
-#define BPP_ASIC_1V8 0x01
-#define BPP_ASIC_1V9 0x02
-#define BPP_ASIC_2V0 0x03
-#define BPP_ASIC_2V7 0x04
-#define BPP_ASIC_2V8 0x05
-#define BPP_ASIC_3V2 0x06
-#define BPP_ASIC_3V3 0x07
-#define BPP_REG_TUNED18 0x07
-#define BPP_TUNED18_SHIFT_8402 5
-#define BPP_TUNED18_SHIFT_8411 4
-#define BPP_PAD_MASK 0x04
-#define BPP_PAD_3V3 0x04
-#define BPP_PAD_1V8 0x00
-#define BPP_LDO_POWB 0x03
-#define BPP_LDO_ON 0x00
-#define BPP_LDO_SUSPEND 0x02
-#define BPP_LDO_OFF 0x03
-
-/* CD_PAD_CTL */
-#define CD_DISABLE_MASK 0x07
-#define MS_CD_DISABLE 0x04
-#define SD_CD_DISABLE 0x02
-#define XD_CD_DISABLE 0x01
-#define CD_DISABLE 0x07
-#define CD_ENABLE 0x00
-#define MS_CD_EN_ONLY 0x03
-#define SD_CD_EN_ONLY 0x05
-#define XD_CD_EN_ONLY 0x06
-#define FORCE_CD_LOW_MASK 0x38
-#define FORCE_CD_XD_LOW 0x08
-#define FORCE_CD_SD_LOW 0x10
-#define FORCE_CD_MS_LOW 0x20
-#define CD_AUTO_DISABLE 0x40
-
-/* SD_STAT1 */
-#define SD_CRC7_ERR 0x80
-#define SD_CRC16_ERR 0x40
-#define SD_CRC_WRITE_ERR 0x20
-#define SD_CRC_WRITE_ERR_MASK 0x1C
-#define GET_CRC_TIME_OUT 0x02
-#define SD_TUNING_COMPARE_ERR 0x01
-
-/* SD_STAT2 */
-#define SD_RSP_80CLK_TIMEOUT 0x01
-
-/* SD_BUS_STAT */
-#define SD_CLK_TOGGLE_EN 0x80
-#define SD_CLK_FORCE_STOP 0x40
-#define SD_DAT3_STATUS 0x10
-#define SD_DAT2_STATUS 0x08
-#define SD_DAT1_STATUS 0x04
-#define SD_DAT0_STATUS 0x02
-#define SD_CMD_STATUS 0x01
-
-/* SD_PAD_CTL */
-#define SD_IO_USING_1V8 0x80
-#define SD_IO_USING_3V3 0x7F
-#define TYPE_A_DRIVING 0x00
-#define TYPE_B_DRIVING 0x01
-#define TYPE_C_DRIVING 0x02
-#define TYPE_D_DRIVING 0x03
-
-/* SD_SAMPLE_POINT_CTL */
-#define DDR_FIX_RX_DAT 0x00
-#define DDR_VAR_RX_DAT 0x80
-#define DDR_FIX_RX_DAT_EDGE 0x00
-#define DDR_FIX_RX_DAT_14_DELAY 0x40
-#define DDR_FIX_RX_CMD 0x00
-#define DDR_VAR_RX_CMD 0x20
-#define DDR_FIX_RX_CMD_POS_EDGE 0x00
-#define DDR_FIX_RX_CMD_14_DELAY 0x10
-#define SD20_RX_POS_EDGE 0x00
-#define SD20_RX_14_DELAY 0x08
-#define SD20_RX_SEL_MASK 0x08
+#define TRANS_NOT_READY 0
+#define TRANS_RESULT_OK 1
+#define TRANS_RESULT_FAIL 2
+#define TRANS_NO_DEVICE 3
-/* SD_PUSH_POINT_CTL */
-#define DDR_FIX_TX_CMD_DAT 0x00
-#define DDR_VAR_TX_CMD_DAT 0x80
-#define DDR_FIX_TX_DAT_14_TSU 0x00
-#define DDR_FIX_TX_DAT_12_TSU 0x40
-#define DDR_FIX_TX_CMD_NEG_EDGE 0x00
-#define DDR_FIX_TX_CMD_14_AHEAD 0x20
-#define SD20_TX_NEG_EDGE 0x00
-#define SD20_TX_14_AHEAD 0x10
-#define SD20_TX_SEL_MASK 0x10
-#define DDR_VAR_SDCLK_POL_SWAP 0x01
-
-/* SD_TRANSFER */
-#define SD_TRANSFER_START 0x80
-#define SD_TRANSFER_END 0x40
-#define SD_STAT_IDLE 0x20
-#define SD_TRANSFER_ERR 0x10
-/* SD Transfer Mode definition */
-#define SD_TM_NORMAL_WRITE 0x00
-#define SD_TM_AUTO_WRITE_3 0x01
-#define SD_TM_AUTO_WRITE_4 0x02
-#define SD_TM_AUTO_READ_3 0x05
-#define SD_TM_AUTO_READ_4 0x06
-#define SD_TM_CMD_RSP 0x08
-#define SD_TM_AUTO_WRITE_1 0x09
-#define SD_TM_AUTO_WRITE_2 0x0A
-#define SD_TM_NORMAL_READ 0x0C
-#define SD_TM_AUTO_READ_1 0x0D
-#define SD_TM_AUTO_READ_2 0x0E
-#define SD_TM_AUTO_TUNING 0x0F
-
-/* SD_VPTX_CTL / SD_VPRX_CTL */
-#define PHASE_CHANGE 0x80
-#define PHASE_NOT_RESET 0x40
-
-/* SD_DCMPS_TX_CTL / SD_DCMPS_RX_CTL */
-#define DCMPS_CHANGE 0x80
-#define DCMPS_CHANGE_DONE 0x40
-#define DCMPS_ERROR 0x20
-#define DCMPS_CURRENT_PHASE 0x1F
-
-/* SD Configure 1 Register */
-#define SD_CLK_DIVIDE_0 0x00
-#define SD_CLK_DIVIDE_256 0xC0
-#define SD_CLK_DIVIDE_128 0x80
-#define SD_BUS_WIDTH_1BIT 0x00
-#define SD_BUS_WIDTH_4BIT 0x01
-#define SD_BUS_WIDTH_8BIT 0x02
-#define SD_ASYNC_FIFO_NOT_RST 0x10
-#define SD_20_MODE 0x00
-#define SD_DDR_MODE 0x04
-#define SD_30_MODE 0x08
-
-#define SD_CLK_DIVIDE_MASK 0xC0
-
-/* SD_CMD_STATE */
-#define SD_CMD_IDLE 0x80
-
-/* SD_DATA_STATE */
-#define SD_DATA_IDLE 0x80
-
-/* DCM_DRP_CTL */
-#define DCM_RESET 0x08
-#define DCM_LOCKED 0x04
-#define DCM_208M 0x00
-#define DCM_TX 0x01
-#define DCM_RX 0x02
-
-/* DCM_DRP_TRIG */
-#define DRP_START 0x80
-#define DRP_DONE 0x40
-
-/* DCM_DRP_CFG */
-#define DRP_WRITE 0x80
-#define DRP_READ 0x00
-#define DCM_WRITE_ADDRESS_50 0x50
-#define DCM_WRITE_ADDRESS_51 0x51
-#define DCM_READ_ADDRESS_00 0x00
-#define DCM_READ_ADDRESS_51 0x51
-
-/* IRQSTAT0 */
-#define DMA_DONE_INT 0x80
-#define SUSPEND_INT 0x40
-#define LINK_RDY_INT 0x20
-#define LINK_DOWN_INT 0x10
-
-/* DMACTL */
-#define DMA_RST 0x80
-#define DMA_BUSY 0x04
-#define DMA_DIR_TO_CARD 0x00
-#define DMA_DIR_FROM_CARD 0x02
-#define DMA_EN 0x01
-#define DMA_128 (0 << 4)
-#define DMA_256 (1 << 4)
-#define DMA_512 (2 << 4)
-#define DMA_1024 (3 << 4)
-#define DMA_PACK_SIZE_MASK 0x30
-
-/* SSC_CTL1 */
-#define SSC_RSTB 0x80
-#define SSC_8X_EN 0x40
-#define SSC_FIX_FRAC 0x20
-#define SSC_SEL_1M 0x00
-#define SSC_SEL_2M 0x08
-#define SSC_SEL_4M 0x10
-#define SSC_SEL_8M 0x18
-
-/* SSC_CTL2 */
-#define SSC_DEPTH_MASK 0x07
-#define SSC_DEPTH_DISALBE 0x00
-#define SSC_DEPTH_4M 0x01
-#define SSC_DEPTH_2M 0x02
-#define SSC_DEPTH_1M 0x03
-#define SSC_DEPTH_500K 0x04
-#define SSC_DEPTH_250K 0x05
-
-/* System Clock Control Register */
-#define CLK_LOW_FREQ 0x01
-
-/* System Clock Divider Register */
-#define CLK_DIV_1 0x01
-#define CLK_DIV_2 0x02
-#define CLK_DIV_4 0x03
-#define CLK_DIV_8 0x04
-
-/* MS_CFG */
-#define SAMPLE_TIME_RISING 0x00
-#define SAMPLE_TIME_FALLING 0x80
-#define PUSH_TIME_DEFAULT 0x00
-#define PUSH_TIME_ODD 0x40
-#define NO_EXTEND_TOGGLE 0x00
-#define EXTEND_TOGGLE_CHK 0x20
-#define MS_BUS_WIDTH_1 0x00
-#define MS_BUS_WIDTH_4 0x10
-#define MS_BUS_WIDTH_8 0x18
-#define MS_2K_SECTOR_MODE 0x04
-#define MS_512_SECTOR_MODE 0x00
-#define MS_TOGGLE_TIMEOUT_EN 0x00
-#define MS_TOGGLE_TIMEOUT_DISEN 0x01
-#define MS_NO_CHECK_INT 0x02
+#define RTSX_RESV_BUF_LEN 4096
+#define HOST_CMDS_BUF_LEN 1024
+#define HOST_SG_TBL_BUF_LEN (RTSX_RESV_BUF_LEN - HOST_CMDS_BUF_LEN)
+#define HOST_SG_TBL_ITEMS (HOST_SG_TBL_BUF_LEN / 8)
+#define MAX_SG_ITEM_LEN 0x80000
+#define HOST_TO_DEVICE 0
+#define DEVICE_TO_HOST 1
-/* MS_TRANS_CFG */
-#define WAIT_INT 0x80
-#define NO_WAIT_INT 0x00
-#define NO_AUTO_READ_INT_REG 0x00
-#define AUTO_READ_INT_REG 0x40
-#define MS_CRC16_ERR 0x20
-#define MS_RDY_TIMEOUT 0x10
-#define MS_INT_CMDNK 0x08
-#define MS_INT_BREQ 0x04
-#define MS_INT_ERR 0x02
-#define MS_INT_CED 0x01
-
-/* MS_TRANSFER */
-#define MS_TRANSFER_START 0x80
-#define MS_TRANSFER_END 0x40
-#define MS_TRANSFER_ERR 0x20
-#define MS_BS_STATE 0x10
-#define MS_TM_READ_BYTES 0x00
-#define MS_TM_NORMAL_READ 0x01
-#define MS_TM_WRITE_BYTES 0x04
-#define MS_TM_NORMAL_WRITE 0x05
-#define MS_TM_AUTO_READ 0x08
-#define MS_TM_AUTO_WRITE 0x0C
-
-/* SD Configure 2 Register */
-#define SD_CALCULATE_CRC7 0x00
-#define SD_NO_CALCULATE_CRC7 0x80
-#define SD_CHECK_CRC16 0x00
-#define SD_NO_CHECK_CRC16 0x40
-#define SD_NO_CHECK_WAIT_CRC_TO 0x20
-#define SD_WAIT_BUSY_END 0x08
-#define SD_NO_WAIT_BUSY_END 0x00
-#define SD_CHECK_CRC7 0x00
-#define SD_NO_CHECK_CRC7 0x04
-#define SD_RSP_LEN_0 0x00
-#define SD_RSP_LEN_6 0x01
-#define SD_RSP_LEN_17 0x02
-/* SD/MMC Response Type Definition */
-#define SD_RSP_TYPE_R0 0x04
-#define SD_RSP_TYPE_R1 0x01
-#define SD_RSP_TYPE_R1b 0x09
-#define SD_RSP_TYPE_R2 0x02
-#define SD_RSP_TYPE_R3 0x05
-#define SD_RSP_TYPE_R4 0x05
-#define SD_RSP_TYPE_R5 0x01
-#define SD_RSP_TYPE_R6 0x01
-#define SD_RSP_TYPE_R7 0x01
-
-/* SD_CONFIGURE3 */
-#define SD_RSP_80CLK_TIMEOUT_EN 0x01
-
-/* Card Transfer Reset Register */
-#define SPI_STOP 0x01
-#define XD_STOP 0x02
-#define SD_STOP 0x04
-#define MS_STOP 0x08
-#define SPI_CLR_ERR 0x10
-#define XD_CLR_ERR 0x20
-#define SD_CLR_ERR 0x40
-#define MS_CLR_ERR 0x80
-
-/* Card Data Source Register */
-#define PINGPONG_BUFFER 0x01
-#define RING_BUFFER 0x00
-
-/* Card Power Control Register */
-#define PMOS_STRG_MASK 0x10
-#define PMOS_STRG_800mA 0x10
-#define PMOS_STRG_400mA 0x00
-#define SD_POWER_OFF 0x03
-#define SD_PARTIAL_POWER_ON 0x01
-#define SD_POWER_ON 0x00
-#define SD_POWER_MASK 0x03
-#define MS_POWER_OFF 0x0C
-#define MS_PARTIAL_POWER_ON 0x04
-#define MS_POWER_ON 0x00
-#define MS_POWER_MASK 0x0C
-#define BPP_POWER_OFF 0x0F
-#define BPP_POWER_5_PERCENT_ON 0x0E
-#define BPP_POWER_10_PERCENT_ON 0x0C
-#define BPP_POWER_15_PERCENT_ON 0x08
-#define BPP_POWER_ON 0x00
-#define BPP_POWER_MASK 0x0F
-#define SD_VCC_PARTIAL_POWER_ON 0x02
-#define SD_VCC_POWER_ON 0x00
-
-/* PWR_GATE_CTRL */
-#define PWR_GATE_EN 0x01
-#define LDO3318_PWR_MASK 0x06
-#define LDO_ON 0x00
-#define LDO_SUSPEND 0x04
-#define LDO_OFF 0x06
-
-/* CARD_CLK_SOURCE */
-#define CRC_FIX_CLK (0x00 << 0)
-#define CRC_VAR_CLK0 (0x01 << 0)
-#define CRC_VAR_CLK1 (0x02 << 0)
-#define SD30_FIX_CLK (0x00 << 2)
-#define SD30_VAR_CLK0 (0x01 << 2)
-#define SD30_VAR_CLK1 (0x02 << 2)
-#define SAMPLE_FIX_CLK (0x00 << 4)
-#define SAMPLE_VAR_CLK0 (0x01 << 4)
-#define SAMPLE_VAR_CLK1 (0x02 << 4)
-
-/* HOST_SLEEP_STATE */
-#define HOST_ENTER_S1 1
-#define HOST_ENTER_S3 2
+#define OUTPUT_3V3 0
+#define OUTPUT_1V8 1
+
+#define RTSX_PHASE_MAX 32
+#define RX_TUNING_CNT 3
#define MS_CFG 0xFD40
+#define SAMPLE_TIME_RISING 0x00
+#define SAMPLE_TIME_FALLING 0x80
+#define PUSH_TIME_DEFAULT 0x00
+#define PUSH_TIME_ODD 0x40
+#define NO_EXTEND_TOGGLE 0x00
+#define EXTEND_TOGGLE_CHK 0x20
+#define MS_BUS_WIDTH_1 0x00
+#define MS_BUS_WIDTH_4 0x10
+#define MS_BUS_WIDTH_8 0x18
+#define MS_2K_SECTOR_MODE 0x04
+#define MS_512_SECTOR_MODE 0x00
+#define MS_TOGGLE_TIMEOUT_EN 0x00
+#define MS_TOGGLE_TIMEOUT_DISEN 0x01
+#define MS_NO_CHECK_INT 0x02
#define MS_TPC 0xFD41
#define MS_TRANS_CFG 0xFD42
+#define WAIT_INT 0x80
+#define NO_WAIT_INT 0x00
+#define NO_AUTO_READ_INT_REG 0x00
+#define AUTO_READ_INT_REG 0x40
+#define MS_CRC16_ERR 0x20
+#define MS_RDY_TIMEOUT 0x10
+#define MS_INT_CMDNK 0x08
+#define MS_INT_BREQ 0x04
+#define MS_INT_ERR 0x02
+#define MS_INT_CED 0x01
#define MS_TRANSFER 0xFD43
+#define MS_TRANSFER_START 0x80
+#define MS_TRANSFER_END 0x40
+#define MS_TRANSFER_ERR 0x20
+#define MS_BS_STATE 0x10
+#define MS_TM_READ_BYTES 0x00
+#define MS_TM_NORMAL_READ 0x01
+#define MS_TM_WRITE_BYTES 0x04
+#define MS_TM_NORMAL_WRITE 0x05
+#define MS_TM_AUTO_READ 0x08
+#define MS_TM_AUTO_WRITE 0x0C
#define MS_INT_REG 0xFD44
#define MS_BYTE_CNT 0xFD45
#define MS_SECTOR_CNT_L 0xFD46
@@ -549,14 +192,90 @@
#define MS_DBUS_H 0xFD48
#define SD_CFG1 0xFDA0
+#define SD_CLK_DIVIDE_0 0x00
+#define SD_CLK_DIVIDE_256 0xC0
+#define SD_CLK_DIVIDE_128 0x80
+#define SD_BUS_WIDTH_1BIT 0x00
+#define SD_BUS_WIDTH_4BIT 0x01
+#define SD_BUS_WIDTH_8BIT 0x02
+#define SD_ASYNC_FIFO_NOT_RST 0x10
+#define SD_20_MODE 0x00
+#define SD_DDR_MODE 0x04
+#define SD_30_MODE 0x08
+#define SD_CLK_DIVIDE_MASK 0xC0
#define SD_CFG2 0xFDA1
+#define SD_CALCULATE_CRC7 0x00
+#define SD_NO_CALCULATE_CRC7 0x80
+#define SD_CHECK_CRC16 0x00
+#define SD_NO_CHECK_CRC16 0x40
+#define SD_NO_CHECK_WAIT_CRC_TO 0x20
+#define SD_WAIT_BUSY_END 0x08
+#define SD_NO_WAIT_BUSY_END 0x00
+#define SD_CHECK_CRC7 0x00
+#define SD_NO_CHECK_CRC7 0x04
+#define SD_RSP_LEN_0 0x00
+#define SD_RSP_LEN_6 0x01
+#define SD_RSP_LEN_17 0x02
+#define SD_RSP_TYPE_R0 0x04
+#define SD_RSP_TYPE_R1 0x01
+#define SD_RSP_TYPE_R1b 0x09
+#define SD_RSP_TYPE_R2 0x02
+#define SD_RSP_TYPE_R3 0x05
+#define SD_RSP_TYPE_R4 0x05
+#define SD_RSP_TYPE_R5 0x01
+#define SD_RSP_TYPE_R6 0x01
+#define SD_RSP_TYPE_R7 0x01
#define SD_CFG3 0xFDA2
+#define SD_RSP_80CLK_TIMEOUT_EN 0x01
+
#define SD_STAT1 0xFDA3
+#define SD_CRC7_ERR 0x80
+#define SD_CRC16_ERR 0x40
+#define SD_CRC_WRITE_ERR 0x20
+#define SD_CRC_WRITE_ERR_MASK 0x1C
+#define GET_CRC_TIME_OUT 0x02
+#define SD_TUNING_COMPARE_ERR 0x01
#define SD_STAT2 0xFDA4
+#define SD_RSP_80CLK_TIMEOUT 0x01
+
#define SD_BUS_STAT 0xFDA5
+#define SD_CLK_TOGGLE_EN 0x80
+#define SD_CLK_FORCE_STOP 0x40
+#define SD_DAT3_STATUS 0x10
+#define SD_DAT2_STATUS 0x08
+#define SD_DAT1_STATUS 0x04
+#define SD_DAT0_STATUS 0x02
+#define SD_CMD_STATUS 0x01
#define SD_PAD_CTL 0xFDA6
+#define SD_IO_USING_1V8 0x80
+#define SD_IO_USING_3V3 0x7F
+#define TYPE_A_DRIVING 0x00
+#define TYPE_B_DRIVING 0x01
+#define TYPE_C_DRIVING 0x02
+#define TYPE_D_DRIVING 0x03
#define SD_SAMPLE_POINT_CTL 0xFDA7
+#define DDR_FIX_RX_DAT 0x00
+#define DDR_VAR_RX_DAT 0x80
+#define DDR_FIX_RX_DAT_EDGE 0x00
+#define DDR_FIX_RX_DAT_14_DELAY 0x40
+#define DDR_FIX_RX_CMD 0x00
+#define DDR_VAR_RX_CMD 0x20
+#define DDR_FIX_RX_CMD_POS_EDGE 0x00
+#define DDR_FIX_RX_CMD_14_DELAY 0x10
+#define SD20_RX_POS_EDGE 0x00
+#define SD20_RX_14_DELAY 0x08
+#define SD20_RX_SEL_MASK 0x08
#define SD_PUSH_POINT_CTL 0xFDA8
+#define DDR_FIX_TX_CMD_DAT 0x00
+#define DDR_VAR_TX_CMD_DAT 0x80
+#define DDR_FIX_TX_DAT_14_TSU 0x00
+#define DDR_FIX_TX_DAT_12_TSU 0x40
+#define DDR_FIX_TX_CMD_NEG_EDGE 0x00
+#define DDR_FIX_TX_CMD_14_AHEAD 0x20
+#define SD20_TX_NEG_EDGE 0x00
+#define SD20_TX_14_AHEAD 0x10
+#define SD20_TX_SEL_MASK 0x10
+#define DDR_VAR_SDCLK_POL_SWAP 0x01
#define SD_CMD0 0xFDA9
#define SD_CMD_START 0x40
#define SD_CMD1 0xFDAA
@@ -569,60 +288,203 @@
#define SD_BLOCK_CNT_L 0xFDB1
#define SD_BLOCK_CNT_H 0xFDB2
#define SD_TRANSFER 0xFDB3
+#define SD_TRANSFER_START 0x80
+#define SD_TRANSFER_END 0x40
+#define SD_STAT_IDLE 0x20
+#define SD_TRANSFER_ERR 0x10
+#define SD_TM_NORMAL_WRITE 0x00
+#define SD_TM_AUTO_WRITE_3 0x01
+#define SD_TM_AUTO_WRITE_4 0x02
+#define SD_TM_AUTO_READ_3 0x05
+#define SD_TM_AUTO_READ_4 0x06
+#define SD_TM_CMD_RSP 0x08
+#define SD_TM_AUTO_WRITE_1 0x09
+#define SD_TM_AUTO_WRITE_2 0x0A
+#define SD_TM_NORMAL_READ 0x0C
+#define SD_TM_AUTO_READ_1 0x0D
+#define SD_TM_AUTO_READ_2 0x0E
+#define SD_TM_AUTO_TUNING 0x0F
#define SD_CMD_STATE 0xFDB5
+#define SD_CMD_IDLE 0x80
+
#define SD_DATA_STATE 0xFDB6
+#define SD_DATA_IDLE 0x80
#define SRCTL 0xFC13
-#define DCM_DRP_CTL 0xFC23
-#define DCM_DRP_TRIG 0xFC24
-#define DCM_DRP_CFG 0xFC25
-#define DCM_DRP_WR_DATA_L 0xFC26
-#define DCM_DRP_WR_DATA_H 0xFC27
-#define DCM_DRP_RD_DATA_L 0xFC28
-#define DCM_DRP_RD_DATA_H 0xFC29
+#define DCM_DRP_CTL 0xFC23
+#define DCM_RESET 0x08
+#define DCM_LOCKED 0x04
+#define DCM_208M 0x00
+#define DCM_TX 0x01
+#define DCM_RX 0x02
+#define DCM_DRP_TRIG 0xFC24
+#define DRP_START 0x80
+#define DRP_DONE 0x40
+#define DCM_DRP_CFG 0xFC25
+#define DRP_WRITE 0x80
+#define DRP_READ 0x00
+#define DCM_WRITE_ADDRESS_50 0x50
+#define DCM_WRITE_ADDRESS_51 0x51
+#define DCM_READ_ADDRESS_00 0x00
+#define DCM_READ_ADDRESS_51 0x51
+#define DCM_DRP_WR_DATA_L 0xFC26
+#define DCM_DRP_WR_DATA_H 0xFC27
+#define DCM_DRP_RD_DATA_L 0xFC28
+#define DCM_DRP_RD_DATA_H 0xFC29
#define SD_VPCLK0_CTL 0xFC2A
#define SD_VPCLK1_CTL 0xFC2B
#define SD_DCMPS0_CTL 0xFC2C
#define SD_DCMPS1_CTL 0xFC2D
#define SD_VPTX_CTL SD_VPCLK0_CTL
#define SD_VPRX_CTL SD_VPCLK1_CTL
+#define PHASE_CHANGE 0x80
+#define PHASE_NOT_RESET 0x40
#define SD_DCMPS_TX_CTL SD_DCMPS0_CTL
#define SD_DCMPS_RX_CTL SD_DCMPS1_CTL
+#define DCMPS_CHANGE 0x80
+#define DCMPS_CHANGE_DONE 0x40
+#define DCMPS_ERROR 0x20
+#define DCMPS_CURRENT_PHASE 0x1F
#define CARD_CLK_SOURCE 0xFC2E
-
+#define CRC_FIX_CLK (0x00 << 0)
+#define CRC_VAR_CLK0 (0x01 << 0)
+#define CRC_VAR_CLK1 (0x02 << 0)
+#define SD30_FIX_CLK (0x00 << 2)
+#define SD30_VAR_CLK0 (0x01 << 2)
+#define SD30_VAR_CLK1 (0x02 << 2)
+#define SAMPLE_FIX_CLK (0x00 << 4)
+#define SAMPLE_VAR_CLK0 (0x01 << 4)
+#define SAMPLE_VAR_CLK1 (0x02 << 4)
#define CARD_PWR_CTL 0xFD50
+#define PMOS_STRG_MASK 0x10
+#define PMOS_STRG_800mA 0x10
+#define PMOS_STRG_400mA 0x00
+#define SD_POWER_OFF 0x03
+#define SD_PARTIAL_POWER_ON 0x01
+#define SD_POWER_ON 0x00
+#define SD_POWER_MASK 0x03
+#define MS_POWER_OFF 0x0C
+#define MS_PARTIAL_POWER_ON 0x04
+#define MS_POWER_ON 0x00
+#define MS_POWER_MASK 0x0C
+#define BPP_POWER_OFF 0x0F
+#define BPP_POWER_5_PERCENT_ON 0x0E
+#define BPP_POWER_10_PERCENT_ON 0x0C
+#define BPP_POWER_15_PERCENT_ON 0x08
+#define BPP_POWER_ON 0x00
+#define BPP_POWER_MASK 0x0F
+#define SD_VCC_PARTIAL_POWER_ON 0x02
+#define SD_VCC_POWER_ON 0x00
#define CARD_CLK_SWITCH 0xFD51
#define RTL8411B_PACKAGE_MODE 0xFD51
#define CARD_SHARE_MODE 0xFD52
+#define CARD_SHARE_MASK 0x0F
+#define CARD_SHARE_MULTI_LUN 0x00
+#define CARD_SHARE_NORMAL 0x00
+#define CARD_SHARE_48_SD 0x04
+#define CARD_SHARE_48_MS 0x08
+#define CARD_SHARE_BAROSSA_SD 0x01
+#define CARD_SHARE_BAROSSA_MS 0x02
#define CARD_DRIVE_SEL 0xFD53
+#define MS_DRIVE_8mA (0x01 << 6)
+#define MMC_DRIVE_8mA (0x01 << 4)
+#define XD_DRIVE_8mA (0x01 << 2)
+#define GPIO_DRIVE_8mA 0x01
+#define RTS5209_CARD_DRIVE_DEFAULT (MS_DRIVE_8mA | MMC_DRIVE_8mA |\
+ XD_DRIVE_8mA | GPIO_DRIVE_8mA)
+#define RTL8411_CARD_DRIVE_DEFAULT (MS_DRIVE_8mA | MMC_DRIVE_8mA |\
+ XD_DRIVE_8mA)
+#define RTSX_CARD_DRIVE_DEFAULT (MS_DRIVE_8mA | GPIO_DRIVE_8mA)
+
#define CARD_STOP 0xFD54
+#define SPI_STOP 0x01
+#define XD_STOP 0x02
+#define SD_STOP 0x04
+#define MS_STOP 0x08
+#define SPI_CLR_ERR 0x10
+#define XD_CLR_ERR 0x20
+#define SD_CLR_ERR 0x40
+#define MS_CLR_ERR 0x80
#define CARD_OE 0xFD55
+#define SD_OUTPUT_EN 0x04
+#define MS_OUTPUT_EN 0x08
#define CARD_AUTO_BLINK 0xFD56
#define CARD_GPIO_DIR 0xFD57
#define CARD_GPIO 0xFD58
#define CARD_DATA_SOURCE 0xFD5B
+#define PINGPONG_BUFFER 0x01
+#define RING_BUFFER 0x00
#define SD30_CLK_DRIVE_SEL 0xFD5A
+#define DRIVER_TYPE_A 0x05
+#define DRIVER_TYPE_B 0x03
+#define DRIVER_TYPE_C 0x02
+#define DRIVER_TYPE_D 0x01
#define CARD_SELECT 0xFD5C
+#define SD_MOD_SEL 2
+#define MS_MOD_SEL 3
#define SD30_DRIVE_SEL 0xFD5E
+#define CFG_DRIVER_TYPE_A 0x02
+#define CFG_DRIVER_TYPE_B 0x03
+#define CFG_DRIVER_TYPE_C 0x01
+#define CFG_DRIVER_TYPE_D 0x00
#define SD30_CMD_DRIVE_SEL 0xFD5E
#define SD30_DAT_DRIVE_SEL 0xFD5F
#define CARD_CLK_EN 0xFD69
+#define SD_CLK_EN 0x04
+#define MS_CLK_EN 0x08
#define SDIO_CTRL 0xFD6B
#define CD_PAD_CTL 0xFD73
-
+#define CD_DISABLE_MASK 0x07
+#define MS_CD_DISABLE 0x04
+#define SD_CD_DISABLE 0x02
+#define XD_CD_DISABLE 0x01
+#define CD_DISABLE 0x07
+#define CD_ENABLE 0x00
+#define MS_CD_EN_ONLY 0x03
+#define SD_CD_EN_ONLY 0x05
+#define XD_CD_EN_ONLY 0x06
+#define FORCE_CD_LOW_MASK 0x38
+#define FORCE_CD_XD_LOW 0x08
+#define FORCE_CD_SD_LOW 0x10
+#define FORCE_CD_MS_LOW 0x20
+#define CD_AUTO_DISABLE 0x40
#define FPDCTL 0xFC00
+#define SSC_POWER_DOWN 0x01
+#define SD_OC_POWER_DOWN 0x02
+#define ALL_POWER_DOWN 0x07
+#define OC_POWER_DOWN 0x06
#define PDINFO 0xFC01
#define CLK_CTL 0xFC02
+#define CHANGE_CLK 0x01
+#define CLK_LOW_FREQ 0x01
+
#define CLK_DIV 0xFC03
+#define CLK_DIV_1 0x01
+#define CLK_DIV_2 0x02
+#define CLK_DIV_4 0x03
+#define CLK_DIV_8 0x04
#define CLK_SEL 0xFC04
#define SSC_DIV_N_0 0xFC0F
#define SSC_DIV_N_1 0xFC10
#define SSC_CTL1 0xFC11
+#define SSC_RSTB 0x80
+#define SSC_8X_EN 0x40
+#define SSC_FIX_FRAC 0x20
+#define SSC_SEL_1M 0x00
+#define SSC_SEL_2M 0x08
+#define SSC_SEL_4M 0x10
+#define SSC_SEL_8M 0x18
#define SSC_CTL2 0xFC12
-
+#define SSC_DEPTH_MASK 0x07
+#define SSC_DEPTH_DISALBE 0x00
+#define SSC_DEPTH_4M 0x01
+#define SSC_DEPTH_2M 0x02
+#define SSC_DEPTH_1M 0x03
+#define SSC_DEPTH_500K 0x04
+#define SSC_DEPTH_250K 0x05
#define RCCTL 0xFC14
#define FPGA_PULL_CTL 0xFC1D
@@ -630,6 +492,24 @@
#define GPIO_CTL 0xFC1F
#define LDO_CTL 0xFC1E
+#define BPP_ASIC_1V7 0x00
+#define BPP_ASIC_1V8 0x01
+#define BPP_ASIC_1V9 0x02
+#define BPP_ASIC_2V0 0x03
+#define BPP_ASIC_2V7 0x04
+#define BPP_ASIC_2V8 0x05
+#define BPP_ASIC_3V2 0x06
+#define BPP_ASIC_3V3 0x07
+#define BPP_REG_TUNED18 0x07
+#define BPP_TUNED18_SHIFT_8402 5
+#define BPP_TUNED18_SHIFT_8411 4
+#define BPP_PAD_MASK 0x04
+#define BPP_PAD_3V3 0x04
+#define BPP_PAD_1V8 0x00
+#define BPP_LDO_POWB 0x03
+#define BPP_LDO_ON 0x00
+#define BPP_LDO_SUSPEND 0x02
+#define BPP_LDO_OFF 0x03
#define SYS_VER 0xFC32
#define CARD_PULL_CTL1 0xFD60
@@ -642,6 +522,10 @@
/* PCI Express Related Registers */
#define IRQEN0 0xFE20
#define IRQSTAT0 0xFE21
+#define DMA_DONE_INT 0x80
+#define SUSPEND_INT 0x40
+#define LINK_RDY_INT 0x20
+#define LINK_DOWN_INT 0x10
#define IRQEN1 0xFE22
#define IRQSTAT1 0xFE23
#define TLPRIEN 0xFE24
@@ -653,6 +537,16 @@
#define DMATC2 0xFE2A
#define DMATC3 0xFE2B
#define DMACTL 0xFE2C
+#define DMA_RST 0x80
+#define DMA_BUSY 0x04
+#define DMA_DIR_TO_CARD 0x00
+#define DMA_DIR_FROM_CARD 0x02
+#define DMA_EN 0x01
+#define DMA_128 (0 << 4)
+#define DMA_256 (1 << 4)
+#define DMA_512 (2 << 4)
+#define DMA_1024 (3 << 4)
+#define DMA_PACK_SIZE_MASK 0x30
#define BCTL 0xFE2D
#define RBBC0 0xFE2E
#define RBBC1 0xFE2F
@@ -678,14 +572,21 @@
#define MSGTXDATA2 0xFE46
#define MSGTXDATA3 0xFE47
#define MSGTXCTL 0xFE48
-#define PETXCFG 0xFE49
#define LTR_CTL 0xFE4A
#define OBFF_CFG 0xFE4C
#define CDRESUMECTL 0xFE52
#define WAKE_SEL_CTL 0xFE54
+#define PCLK_CTL 0xFE55
+#define PCLK_MODE_SEL 0x20
#define PME_FORCE_CTL 0xFE56
+
#define ASPM_FORCE_CTL 0xFE57
+#define FORCE_ASPM_CTL0 0x10
+#define FORCE_ASPM_VAL_MASK 0x03
+#define FORCE_ASPM_L1_EN 0x02
+#define FORCE_ASPM_L0_EN 0x01
+#define FORCE_ASPM_NO_ASPM 0x00
#define PM_CLK_FORCE_CTL 0xFE58
#define FUNC_FORCE_CTL 0xFE59
#define PERST_GLITCH_WIDTH 0xFE5C
@@ -693,19 +594,36 @@
#define RESET_LOAD_REG 0xFE5E
#define EFUSE_CONTENT 0xFE5F
#define HOST_SLEEP_STATE 0xFE60
-#define SDIO_CFG 0xFE70
+#define HOST_ENTER_S1 1
+#define HOST_ENTER_S3 2
+#define SDIO_CFG 0xFE70
+#define PM_EVENT_DEBUG 0xFE71
+#define PME_DEBUG_0 0x08
#define NFTS_TX_CTRL 0xFE72
#define PWR_GATE_CTRL 0xFE75
+#define PWR_GATE_EN 0x01
+#define LDO3318_PWR_MASK 0x06
+#define LDO_ON 0x00
+#define LDO_SUSPEND 0x04
+#define LDO_OFF 0x06
#define PWD_SUSPEND_EN 0xFE76
#define LDO_PWR_SEL 0xFE78
+#define L1SUB_CONFIG1 0xFE8D
+#define L1SUB_CONFIG2 0xFE8E
+#define L1SUB_AUTO_CFG 0x02
+#define L1SUB_CONFIG3 0xFE8F
+
#define DUMMY_REG_RESET_0 0xFE90
#define AUTOLOAD_CFG_BASE 0xFF00
+#define PETXCFG 0xFF03
#define PM_CTRL1 0xFF44
+#define CD_RESUME_EN_MASK 0xF0
+
#define PM_CTRL2 0xFF45
#define PM_CTRL3 0xFF46
#define SDIO_SEND_PME_EN 0x80
@@ -726,18 +644,125 @@
#define IMAGE_FLAG_ADDR0 0xCE80
#define IMAGE_FLAG_ADDR1 0xCE81
+#define RREF_CFG 0xFF6C
+#define RREF_VBGSEL_MASK 0x38
+#define RREF_VBGSEL_1V25 0x28
+
+#define OOBS_CONFIG 0xFF6E
+#define OOBS_AUTOK_DIS 0x80
+#define OOBS_VAL_MASK 0x1F
+
+#define LDO_DV18_CFG 0xFF70
+#define LDO_DV18_SR_MASK 0xC0
+#define LDO_DV18_SR_DF 0x40
+
+#define LDO_CONFIG2 0xFF71
+#define LDO_D3318_MASK 0x07
+#define LDO_D3318_33V 0x07
+#define LDO_D3318_18V 0x02
+
+#define LDO_VCC_CFG0 0xFF72
+#define LDO_VCC_LMTVTH_MASK 0x30
+#define LDO_VCC_LMTVTH_2A 0x10
+
+#define LDO_VCC_CFG1 0xFF73
+#define LDO_VCC_REF_TUNE_MASK 0x30
+#define LDO_VCC_REF_1V2 0x20
+#define LDO_VCC_TUNE_MASK 0x07
+#define LDO_VCC_1V8 0x04
+#define LDO_VCC_3V3 0x07
+#define LDO_VCC_LMT_EN 0x08
+
+#define LDO_VIO_CFG 0xFF75
+#define LDO_VIO_SR_MASK 0xC0
+#define LDO_VIO_SR_DF 0x40
+#define LDO_VIO_REF_TUNE_MASK 0x30
+#define LDO_VIO_REF_1V2 0x20
+#define LDO_VIO_TUNE_MASK 0x07
+#define LDO_VIO_1V7 0x03
+#define LDO_VIO_1V8 0x04
+#define LDO_VIO_3V3 0x07
+
+#define LDO_DV12S_CFG 0xFF76
+#define LDO_REF12_TUNE_MASK 0x18
+#define LDO_REF12_TUNE_DF 0x10
+#define LDO_D12_TUNE_MASK 0x07
+#define LDO_D12_TUNE_DF 0x04
+
+#define LDO_AV12S_CFG 0xFF77
+#define LDO_AV12S_TUNE_MASK 0x07
+#define LDO_AV12S_TUNE_DF 0x04
+
+#define SD40_LDO_CTL1 0xFE7D
+#define SD40_VIO_TUNE_MASK 0x70
+#define SD40_VIO_TUNE_1V7 0x30
+#define SD_VIO_LDO_1V8 0x40
+#define SD_VIO_LDO_3V3 0x70
+
/* Phy register */
#define PHY_PCR 0x00
+#define PHY_PCR_FORCE_CODE 0xB000
+#define PHY_PCR_OOBS_CALI_50 0x0800
+#define PHY_PCR_OOBS_VCM_08 0x0200
+#define PHY_PCR_OOBS_SEN_90 0x0040
+#define PHY_PCR_RSSI_EN 0x0002
+#define PHY_PCR_RX10K 0x0001
+
#define PHY_RCR0 0x01
#define PHY_RCR1 0x02
+#define PHY_RCR1_ADP_TIME_4 0x0400
+#define PHY_RCR1_VCO_COARSE 0x001F
+#define PHY_SSCCR2 0x02
+#define PHY_SSCCR2_PLL_NCODE 0x0A00
+#define PHY_SSCCR2_TIME0 0x001C
+#define PHY_SSCCR2_TIME2_WIDTH 0x0003
+
#define PHY_RCR2 0x03
+#define PHY_RCR2_EMPHASE_EN 0x8000
+#define PHY_RCR2_NADJR 0x4000
+#define PHY_RCR2_CDR_SR_2 0x0100
+#define PHY_RCR2_FREQSEL_12 0x0040
+#define PHY_RCR2_CDR_SC_12P 0x0010
+#define PHY_RCR2_CALIB_LATE 0x0002
+#define PHY_SSCCR3 0x03
+#define PHY_SSCCR3_STEP_IN 0x2740
+#define PHY_SSCCR3_CHECK_DELAY 0x0008
+#define _PHY_ANA03 0x03
+#define _PHY_ANA03_TIMER_MAX 0x2700
+#define _PHY_ANA03_OOBS_DEB_EN 0x0040
+#define _PHY_CMU_DEBUG_EN 0x0008
+
#define PHY_RTCR 0x04
#define PHY_RDR 0x05
+#define PHY_RDR_RXDSEL_1_9 0x4000
+#define PHY_SSC_AUTO_PWD 0x0600
#define PHY_TCR0 0x06
#define PHY_TCR1 0x07
#define PHY_TUNE 0x08
+#define PHY_TUNE_TUNEREF_1_0 0x4000
+#define PHY_TUNE_VBGSEL_1252 0x0C00
+#define PHY_TUNE_SDBUS_33 0x0200
+#define PHY_TUNE_TUNED18 0x01C0
+#define PHY_TUNE_TUNED12 0X0020
+#define PHY_TUNE_TUNEA12 0x0004
+#define PHY_TUNE_VOLTAGE_MASK 0xFC3F
+#define PHY_TUNE_VOLTAGE_3V3 0x03C0
+#define PHY_TUNE_D18_1V8 0x0100
+#define PHY_TUNE_D18_1V7 0x0080
+#define PHY_ANA08 0x08
+#define PHY_ANA08_RX_EQ_DCGAIN 0x5000
+#define PHY_ANA08_SEL_RX_EN 0x0400
+#define PHY_ANA08_RX_EQ_VAL 0x03C0
+#define PHY_ANA08_SCP 0x0020
+#define PHY_ANA08_SEL_IPI 0x0004
+
#define PHY_IMR 0x09
#define PHY_BPCR 0x0A
+#define PHY_BPCR_IBRXSEL 0x0400
+#define PHY_BPCR_IBTXSEL 0x0100
+#define PHY_BPCR_IB_FILTER 0x0080
+#define PHY_BPCR_CMIRROR_EN 0x0040
+
#define PHY_BIST 0x0B
#define PHY_RAW_L 0x0C
#define PHY_RAW_H 0x0D
@@ -745,6 +770,7 @@
#define PHY_HOST_CLK_CTRL 0x0F
#define PHY_DMR 0x10
#define PHY_BACR 0x11
+#define PHY_BACR_BASIC_MASK 0xFFF3
#define PHY_IER 0x12
#define PHY_BCSR 0x13
#define PHY_BPR 0x14
@@ -752,80 +778,70 @@
#define PHY_BPNR 0x16
#define PHY_BRNR2 0x17
#define PHY_BENR 0x18
-#define PHY_REG_REV 0x19
+#define PHY_REV 0x19
+#define PHY_REV_RESV 0xE000
+#define PHY_REV_RXIDLE_LATCHED 0x1000
+#define PHY_REV_P1_EN 0x0800
+#define PHY_REV_RXIDLE_EN 0x0400
+#define PHY_REV_CLKREQ_TX_EN 0x0200
+#define PHY_REV_CLKREQ_RX_EN 0x0100
+#define PHY_REV_CLKREQ_DT_1_0 0x0040
+#define PHY_REV_STOP_CLKRD 0x0020
+#define PHY_REV_RX_PWST 0x0008
+#define PHY_REV_STOP_CLKWR 0x0004
+#define _PHY_REV0 0x19
+#define _PHY_REV0_FILTER_OUT 0x3800
+#define _PHY_REV0_CDR_BYPASS_PFD 0x0100
+#define _PHY_REV0_CDR_RX_IDLE_BYPASS 0x0002
+
#define PHY_FLD0 0x1A
+#define PHY_ANA1A 0x1A
+#define PHY_ANA1A_TXR_LOOPBACK 0x2000
+#define PHY_ANA1A_RXT_BIST 0x0500
+#define PHY_ANA1A_TXR_BIST 0x0040
+#define PHY_ANA1A_REV 0x0006
#define PHY_FLD1 0x1B
#define PHY_FLD2 0x1C
#define PHY_FLD3 0x1D
+#define PHY_FLD3_TIMER_4 0x0800
+#define PHY_FLD3_TIMER_6 0x0020
+#define PHY_FLD3_RXDELINK 0x0004
+#define PHY_ANA1D 0x1D
+#define PHY_ANA1D_DEBUG_ADDR 0x0004
+#define _PHY_FLD0 0x1D
+#define _PHY_FLD0_CLK_REQ_20C 0x8000
+#define _PHY_FLD0_RX_IDLE_EN 0x1000
+#define _PHY_FLD0_BIT_ERR_RSTN 0x0800
+#define _PHY_FLD0_BER_COUNT 0x01E0
+#define _PHY_FLD0_BER_TIMER 0x001E
+#define _PHY_FLD0_CHECK_EN 0x0001
+
#define PHY_FLD4 0x1E
+#define PHY_FLD4_FLDEN_SEL 0x4000
+#define PHY_FLD4_REQ_REF 0x2000
+#define PHY_FLD4_RXAMP_OFF 0x1000
+#define PHY_FLD4_REQ_ADDA 0x0800
+#define PHY_FLD4_BER_COUNT 0x00E0
+#define PHY_FLD4_BER_TIMER 0x000A
+#define PHY_FLD4_BER_CHK_EN 0x0001
+#define PHY_DIG1E 0x1E
+#define PHY_DIG1E_REV 0x4000
+#define PHY_DIG1E_D0_X_D1 0x1000
+#define PHY_DIG1E_RX_ON_HOST 0x0800
+#define PHY_DIG1E_RCLK_REF_HOST 0x0400
+#define PHY_DIG1E_RCLK_TX_EN_KEEP 0x0040
+#define PHY_DIG1E_RCLK_TX_TERM_KEEP 0x0020
+#define PHY_DIG1E_RCLK_RX_EIDLE_ON 0x0010
+#define PHY_DIG1E_TX_TERM_KEEP 0x0008
+#define PHY_DIG1E_RX_TERM_KEEP 0x0004
+#define PHY_DIG1E_TX_EN_KEEP 0x0002
+#define PHY_DIG1E_RX_EN_KEEP 0x0001
#define PHY_DUM_REG 0x1F
-#define LCTLR 0x80
-#define LCTLR_EXT_SYNC 0x80
-#define LCTLR_COMMON_CLOCK_CFG 0x40
-#define LCTLR_RETRAIN_LINK 0x20
-#define LCTLR_LINK_DISABLE 0x10
-#define LCTLR_RCB 0x08
-#define LCTLR_RESERVED 0x04
-#define LCTLR_ASPM_CTL_MASK 0x03
-
#define PCR_SETTING_REG1 0x724
#define PCR_SETTING_REG2 0x814
#define PCR_SETTING_REG3 0x747
-/* Phy bits */
-#define PHY_PCR_FORCE_CODE 0xB000
-#define PHY_PCR_OOBS_CALI_50 0x0800
-#define PHY_PCR_OOBS_VCM_08 0x0200
-#define PHY_PCR_OOBS_SEN_90 0x0040
-#define PHY_PCR_RSSI_EN 0x0002
-
-#define PHY_RCR1_ADP_TIME 0x0100
-#define PHY_RCR1_VCO_COARSE 0x001F
-
-#define PHY_RCR2_EMPHASE_EN 0x8000
-#define PHY_RCR2_NADJR 0x4000
-#define PHY_RCR2_CDR_CP_10 0x0400
-#define PHY_RCR2_CDR_SR_2 0x0100
-#define PHY_RCR2_FREQSEL_12 0x0040
-#define PHY_RCR2_CPADJEN 0x0020
-#define PHY_RCR2_CDR_SC_8 0x0008
-#define PHY_RCR2_CALIB_LATE 0x0002
-
-#define PHY_RDR_RXDSEL_1_9 0x4000
-
-#define PHY_TUNE_TUNEREF_1_0 0x4000
-#define PHY_TUNE_VBGSEL_1252 0x0C00
-#define PHY_TUNE_SDBUS_33 0x0200
-#define PHY_TUNE_TUNED18 0x01C0
-#define PHY_TUNE_TUNED12 0X0020
-
-#define PHY_BPCR_IBRXSEL 0x0400
-#define PHY_BPCR_IBTXSEL 0x0100
-#define PHY_BPCR_IB_FILTER 0x0080
-#define PHY_BPCR_CMIRROR_EN 0x0040
-
-#define PHY_REG_REV_RESV 0xE000
-#define PHY_REG_REV_RXIDLE_LATCHED 0x1000
-#define PHY_REG_REV_P1_EN 0x0800
-#define PHY_REG_REV_RXIDLE_EN 0x0400
-#define PHY_REG_REV_CLKREQ_DLY_TIMER_1_0 0x0040
-#define PHY_REG_REV_STOP_CLKRD 0x0020
-#define PHY_REG_REV_RX_PWST 0x0008
-#define PHY_REG_REV_STOP_CLKWR 0x0004
-
-#define PHY_FLD3_TIMER_4 0x7800
-#define PHY_FLD3_TIMER_6 0x00E0
-#define PHY_FLD3_RXDELINK 0x0004
-
-#define PHY_FLD4_FLDEN_SEL 0x4000
-#define PHY_FLD4_REQ_REF 0x2000
-#define PHY_FLD4_RXAMP_OFF 0x1000
-#define PHY_FLD4_REQ_ADDA 0x0800
-#define PHY_FLD4_BER_COUNT 0x00E0
-#define PHY_FLD4_BER_TIMER 0x000A
-#define PHY_FLD4_BER_CHK_EN 0x0001
-
#define rtsx_pci_init_cmd(pcr) ((pcr)->ci = 0)
struct rtsx_pcr;
@@ -835,6 +851,8 @@ struct pcr_handle {
};
struct pcr_ops {
+ int (*write_phy)(struct rtsx_pcr *pcr, u8 addr, u16 val);
+ int (*read_phy)(struct rtsx_pcr *pcr, u8 addr, u16 *val);
int (*extra_init_hw)(struct rtsx_pcr *pcr);
int (*optimize_phy)(struct rtsx_pcr *pcr);
int (*turn_on_led)(struct rtsx_pcr *pcr);
@@ -856,6 +874,7 @@ enum PDEV_STAT {PDEV_STAT_IDLE, PDEV_STAT_RUN};
struct rtsx_pcr {
struct pci_dev *pci;
unsigned int id;
+ int pcie_cap;
/* pci resources */
unsigned long addr;
@@ -928,6 +947,8 @@ struct rtsx_pcr {
const struct pcr_ops *ops;
enum PDEV_STAT state;
+ u16 reg_pm_ctrl3;
+
int num_slots;
struct rtsx_slot *slots;
};
@@ -935,6 +956,10 @@ struct rtsx_pcr {
#define CHK_PCI_PID(pcr, pid) ((pcr)->pci->device == (pid))
#define PCI_VID(pcr) ((pcr)->pci->vendor)
#define PCI_PID(pcr) ((pcr)->pci->device)
+#define is_version(pcr, pid, ver) \
+ (CHK_PCI_PID(pcr, pid) && (pcr)->ic_version == (ver))
+#define pcr_dbg(pcr, fmt, arg...) \
+ dev_dbg(&(pcr)->pci->dev, fmt, ##arg)
#define SDR104_PHASE(val) ((val) & 0xFF)
#define SDR50_PHASE(val) (((val) >> 8) & 0xFF)
@@ -1004,4 +1029,17 @@ static inline void rtsx_pci_write_be32(struct rtsx_pcr *pcr, u16 reg, u32 val)
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg + 3, 0xFF, val);
}
+static inline int rtsx_pci_update_phy(struct rtsx_pcr *pcr, u8 addr,
+ u16 mask, u16 append)
+{
+ int err;
+ u16 val;
+
+ err = rtsx_pci_read_phy_register(pcr, addr, &val);
+ if (err < 0)
+ return err;
+
+ return rtsx_pci_write_phy_register(pcr, addr, (val & mask) | append);
+}
+
#endif
diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
index 3fdb7cfbffb3..75115384f3fc 100644
--- a/include/linux/mfd/samsung/core.h
+++ b/include/linux/mfd/samsung/core.h
@@ -58,13 +58,7 @@ enum sec_device_type {
* @irq_base: Base IRQ number for device, required for IRQs
* @irq: Generic IRQ number for device
* @irq_data: Runtime data structure for IRQ controller
- * @ono: Power onoff IRQ number for s5m87xx
* @wakeup: Whether or not this is a wakeup device
- * @wtsr_smpl: Whether or not to enable in RTC driver the Watchdog
- * Timer Software Reset (registers set to default value
- * after PWRHOLD falling) and Sudden Momentary Power Loss
- * (PMIC will enter power on sequence after short drop in
- * VBATT voltage).
*/
struct sec_pmic_dev {
struct device *dev;
@@ -77,9 +71,7 @@ struct sec_pmic_dev {
int irq;
struct regmap_irq_chip_data *irq_data;
- int ono;
bool wakeup;
- bool wtsr_smpl;
};
int sec_irq_init(struct sec_pmic_dev *sec_pmic);
@@ -95,7 +87,6 @@ struct sec_platform_data {
int irq_base;
int (*cfg_pmic_irq)(void);
- int ono;
bool wakeup;
bool buck_voltage_lock;
diff --git a/include/linux/mfd/samsung/irq.h b/include/linux/mfd/samsung/irq.h
index f35af7361b60..667aa40486dd 100644
--- a/include/linux/mfd/samsung/irq.h
+++ b/include/linux/mfd/samsung/irq.h
@@ -74,8 +74,8 @@ enum s2mps11_irq {
S2MPS11_IRQ_MRB,
S2MPS11_IRQ_RTC60S,
- S2MPS11_IRQ_RTCA0,
S2MPS11_IRQ_RTCA1,
+ S2MPS11_IRQ_RTCA0,
S2MPS11_IRQ_SMPL,
S2MPS11_IRQ_RTC1S,
S2MPS11_IRQ_WTSR,
diff --git a/include/linux/mfd/sky81452.h b/include/linux/mfd/sky81452.h
new file mode 100644
index 000000000000..b0925fa3e9ef
--- /dev/null
+++ b/include/linux/mfd/sky81452.h
@@ -0,0 +1,31 @@
+/*
+ * sky81452.h SKY81452 MFD driver
+ *
+ * Copyright 2014 Skyworks Solutions Inc.
+ * Author : Gyungoh Yoo <jack.yoo@skyworksinc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _SKY81452_H
+#define _SKY81452_H
+
+#include <linux/platform_data/sky81452-backlight.h>
+#include <linux/regulator/machine.h>
+
+struct sky81452_platform_data {
+ struct sky81452_bl_platform_data *bl_pdata;
+ struct regulator_init_data *regulator_init_data;
+};
+
+#endif
diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index 3f4e994ace2b..1fd50dcfe47c 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -128,6 +128,7 @@
/* Sequencer Status */
#define SEQ_STATUS BIT(5)
+#define CHARGE_STEP 0x11
#define ADC_CLK 3000000
#define TOTAL_STEPS 16
diff --git a/include/linux/platform_data/sky81452-backlight.h b/include/linux/platform_data/sky81452-backlight.h
new file mode 100644
index 000000000000..1231e9bb00f1
--- /dev/null
+++ b/include/linux/platform_data/sky81452-backlight.h
@@ -0,0 +1,46 @@
+/*
+ * sky81452.h SKY81452 backlight driver
+ *
+ * Copyright 2014 Skyworks Solutions Inc.
+ * Author : Gyungoh Yoo <jack.yoo@skyworksinc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _SKY81452_BACKLIGHT_H
+#define _SKY81452_BACKLIGHT_H
+
+/**
+ * struct sky81452_platform_data
+ * @name: backlight driver name.
+ If it is not defined, default name is lcd-backlight.
+ * @gpio_enable:GPIO number which control EN pin
+ * @enable: Enable mask for current sink channel 1, 2, 3, 4, 5 and 6.
+ * @ignore_pwm: true if DPWMI should be ignored.
+ * @dpwm_mode: true is DPWM dimming mode, otherwise Analog dimming mode.
+ * @phase_shift:true is phase shift mode.
+ * @short_detecion_threshold: It should be one of 4, 5, 6 and 7V.
+ * @boost_current_limit: It should be one of 2300, 2750mA.
+ */
+struct sky81452_bl_platform_data {
+ const char *name;
+ int gpio_enable;
+ unsigned int enable;
+ bool ignore_pwm;
+ bool dpwm_mode;
+ bool phase_shift;
+ unsigned int short_detection_threshold;
+ unsigned int boost_current_limit;
+};
+
+#endif