Merge tag 'tty-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty and serial updates from Greg KH:
 "Here is the big tty and serial patch set for 4.9-rc1.

  It also includes some drivers/dma/ changes, as those were needed by
  some serial drivers, and they were all acked by the DMA maintainer.

  Also in here is the long-suffering ACPI SPCR patchset, which was
  passed around from maintainer to maintainer like a hot-potato. Seems I
  was the sucker^Wlucky one. All of those patches have been acked by the
  various subsystem maintainers as well.

  All of this has been in linux-next with no reported issues"

* tag 'tty-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (111 commits)
  Revert "serial: pl011: add console matching function"
  MAINTAINERS: update entry for atmel_serial driver
  serial: pl011: add console matching function
  ARM64: ACPI: enable ACPI_SPCR_TABLE
  ACPI: parse SPCR and enable matching console
  of/serial: move earlycon early_param handling to serial
  Revert "drivers/tty: Explicitly pass current to show_stack"
  tty: amba-pl011: Don't complain on -EPROBE_DEFER when no irq
  nios2: dts: 10m50: Add tx-threshold parameter
  serial: 8250: Set Altera 16550 TX FIFO Threshold
  serial: 8250: of: Load TX FIFO Threshold from DT
  Documentation: dt: serial: Add TX FIFO threshold parameter
  drivers/tty: Explicitly pass current to show_stack
  serial: imx: Fix DCD reading
  serial: stm32: mark symbols static where possible
  serial: xuartps: Add some register initialisation to cdns_early_console_setup()
  serial: xuartps: Removed unwanted checks while reading the error conditions
  serial: xuartps: Rewrite the interrupt handling logic
  serial: stm32: use mapbase instead of membase for DMA
  tty/serial: atmel: fix fractional baud rate computation
  ...

10 files changed, 57 insertions, 8 deletions

diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 19e650c940b6..94afcb2c384c 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -1099,4 +1099,10 @@ extern bool acpi_has_watchdog(void);
 static inline bool acpi_has_watchdog(void) { return false; }
 #endif
 
+#ifdef CONFIG_ACPI_SPCR_TABLE
+int parse_spcr(bool earlycon);
+#else
+static inline int parse_spcr(bool earlycon) { return 0; }
+#endif
+
 #endif	/*_LINUX_ACPI_H*/
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
index 3d8dcdd1aeae..d143c13bed26 100644
--- a/include/linux/amba/bus.h
+++ b/include/linux/amba/bus.h
@@ -53,8 +53,14 @@ enum amba_vendor {
 	AMBA_VENDOR_ST = 0x80,
 	AMBA_VENDOR_QCOM = 0x51,
 	AMBA_VENDOR_LSI = 0xb6,
+	AMBA_VENDOR_LINUX = 0xfe,	/* This value is not official */
 };
 
+/* This is used to generate pseudo-ID for AMBA device */
+#define AMBA_LINUX_ID(conf, rev, part) \
+	(((conf) & 0xff) << 24 | ((rev) & 0xf) << 20 | \
+	AMBA_VENDOR_LINUX << 12 | ((part) & 0xfff))
+
 extern struct bus_type amba_bustype;
 
 #define to_amba_device(d)	container_of(d, struct amba_device, dev)
diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h
index d76a19ba2cff..ad0965e21a5e 100644
--- a/include/linux/amba/serial.h
+++ b/include/linux/amba/serial.h
@@ -104,6 +104,15 @@
 #define UART01x_FR_CTS 		0x001
 #define UART01x_FR_TMSK		(UART01x_FR_TXFF + UART01x_FR_BUSY)
 
+/*
+ * Some bits of Flag Register on ZTE device have different position from
+ * standard ones.
+ */
+#define ZX_UART01x_FR_BUSY	0x100
+#define ZX_UART01x_FR_DSR	0x008
+#define ZX_UART01x_FR_CTS	0x002
+#define ZX_UART011_FR_RI	0x001
+
 #define UART011_CR_CTSEN	0x8000	/* CTS hardware flow control */
 #define UART011_CR_RTSEN	0x4000	/* RTS hardware flow control */
 #define UART011_CR_OUT2		0x2000	/* OUT2 */
diff --git a/include/linux/atmel_serial.h b/include/linux/atmel_serial.h
index 5a4d664af87a..bd2560502f3c 100644
--- a/include/linux/atmel_serial.h
+++ b/include/linux/atmel_serial.h
@@ -118,6 +118,8 @@
 
 #define ATMEL_US_BRGR		0x20	/* Baud Rate Generator Register */
 #define	ATMEL_US_CD		GENMASK(15, 0)	/* Clock Divider */
+#define ATMEL_US_FP_OFFSET	16	/* Fractional Part */
+#define ATMEL_US_FP_MASK	0x7
 
 #define ATMEL_US_RTOR		0x24	/* Receiver Time-out Register for USART */
 #define ATMEL_UA_RTOR		0x28	/* Receiver Time-out Register for UART */
diff --git a/include/linux/dma/dw.h b/include/linux/dma/dw.h
index f2e538aaddad..ccfd0c3777df 100644
--- a/include/linux/dma/dw.h
+++ b/include/linux/dma/dw.h
@@ -40,8 +40,13 @@ struct dw_dma_chip {
 };
 
 /* Export to the platform drivers */
+#if IS_ENABLED(CONFIG_DW_DMAC_CORE)
 int dw_dma_probe(struct dw_dma_chip *chip);
 int dw_dma_remove(struct dw_dma_chip *chip);
+#else
+static inline int dw_dma_probe(struct dw_dma_chip *chip) { return -ENODEV; }
+static inline int dw_dma_remove(struct dw_dma_chip *chip) { return 0; }
+#endif /* CONFIG_DW_DMAC_CORE */
 
 /* DMA API extensions */
 struct dw_desc;
diff --git a/include/linux/dma/hsu.h b/include/linux/dma/hsu.h
index aaff68efba5d..197eec63e501 100644
--- a/include/linux/dma/hsu.h
+++ b/include/linux/dma/hsu.h
@@ -41,8 +41,7 @@ struct hsu_dma_chip {
 /* Export to the internal users */
 int hsu_dma_get_status(struct hsu_dma_chip *chip, unsigned short nr,
 		       u32 *status);
-irqreturn_t hsu_dma_do_irq(struct hsu_dma_chip *chip, unsigned short nr,
-			   u32 status);
+int hsu_dma_do_irq(struct hsu_dma_chip *chip, unsigned short nr, u32 status);
 
 /* Export to the platform drivers */
 int hsu_dma_probe(struct hsu_dma_chip *chip);
@@ -53,10 +52,10 @@ static inline int hsu_dma_get_status(struct hsu_dma_chip *chip,
 {
 	return 0;
 }
-static inline irqreturn_t hsu_dma_do_irq(struct hsu_dma_chip *chip,
-					 unsigned short nr, u32 status)
+static inline int hsu_dma_do_irq(struct hsu_dma_chip *chip, unsigned short nr,
+				 u32 status)
 {
-	return IRQ_NONE;
+	return 0;
 }
 static inline int hsu_dma_probe(struct hsu_dma_chip *chip) { return -ENODEV; }
 static inline int hsu_dma_remove(struct hsu_dma_chip *chip) { return 0; }
diff --git a/include/linux/of_fdt.h b/include/linux/of_fdt.h
index 26c3302ae58f..4341f32516d8 100644
--- a/include/linux/of_fdt.h
+++ b/include/linux/of_fdt.h
@@ -14,6 +14,7 @@
 
 #include <linux/types.h>
 #include <linux/init.h>
+#include <linux/errno.h>
 
 /* Definitions used by the flattened device tree */
 #define OF_DT_HEADER		0xd00dfeed	/* marker */
@@ -66,6 +67,7 @@ extern int early_init_dt_scan_chosen(unsigned long node, const char *uname,
 				     int depth, void *data);
 extern int early_init_dt_scan_memory(unsigned long node, const char *uname,
 				     int depth, void *data);
+extern int early_init_dt_scan_chosen_stdout(void);
 extern void early_init_fdt_scan_reserved_mem(void);
 extern void early_init_fdt_reserve_self(void);
 extern void early_init_dt_add_memory_arch(u64 base, u64 size);
@@ -94,6 +96,7 @@ extern void early_get_first_memblock_info(void *, phys_addr_t *);
 extern u64 of_flat_dt_translate_address(unsigned long node);
 extern void of_fdt_limit_memory(int limit);
 #else /* CONFIG_OF_FLATTREE */
+static inline int early_init_dt_scan_chosen_stdout(void) { return -ENODEV; }
 static inline void early_init_fdt_scan_reserved_mem(void) {}
 static inline void early_init_fdt_reserve_self(void) {}
 static inline const char *of_flat_dt_get_machine_name(void) { return NULL; }
diff --git a/include/linux/platform_data/dma-dw.h b/include/linux/platform_data/dma-dw.h
index d15d8ba8cc24..5f0e11e7354c 100644
--- a/include/linux/platform_data/dma-dw.h
+++ b/include/linux/platform_data/dma-dw.h
@@ -23,6 +23,7 @@
  * @dst_id:	dst request line
  * @m_master:	memory master for transfers on allocated channel
  * @p_master:	peripheral master for transfers on allocated channel
+ * @hs_polarity:set active low polarity of handshake interface
  */
 struct dw_dma_slave {
 	struct device		*dma_dev;
@@ -30,6 +31,7 @@ struct dw_dma_slave {
 	u8			dst_id;
 	u8			m_master;
 	u8			p_master;
+	bool			hs_polarity;
 };
 
 /**
@@ -38,6 +40,7 @@ struct dw_dma_slave {
  * @is_private: The device channels should be marked as private and not for
  *	by the general purpose DMA channel allocator.
  * @is_memcpy: The device channels do support memory-to-memory transfers.
+ * @is_nollp: The device channels does not support multi block transfers.
  * @chan_allocation_order: Allocate channels starting from 0 or 7
  * @chan_priority: Set channel priority increasing from 0 to 7 or 7 to 0.
  * @block_size: Maximum block size supported by the controller
@@ -49,6 +52,7 @@ struct dw_dma_platform_data {
 	unsigned int	nr_channels;
 	bool		is_private;
 	bool		is_memcpy;
+	bool		is_nollp;
 #define CHAN_ALLOCATION_ASCENDING	0	/* zero to seven */
 #define CHAN_ALLOCATION_DESCENDING	1	/* seven to zero */
 	unsigned char	chan_allocation_order;
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 2f44e2013654..344201437017 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -367,14 +367,21 @@ extern const struct earlycon_id __earlycon_table_end[];
 
 #define EARLYCON_DECLARE(_name, fn)	OF_EARLYCON_DECLARE(_name, "", fn)
 
-extern int setup_earlycon(char *buf);
 extern int of_setup_earlycon(const struct earlycon_id *match,
 			     unsigned long node,
 			     const char *options);
 
+#ifdef CONFIG_SERIAL_EARLYCON
+extern bool earlycon_init_is_deferred __initdata;
+int setup_earlycon(char *buf);
+#else
+static const bool earlycon_init_is_deferred;
+static inline int setup_earlycon(char *buf) { return 0; }
+#endif
+
 struct uart_port *uart_get_console(struct uart_port *ports, int nr,
 				   struct console *c);
-int uart_parse_earlycon(char *p, unsigned char *iotype, unsigned long *addr,
+int uart_parse_earlycon(char *p, unsigned char *iotype, resource_size_t *addr,
 			char **options);
 void uart_parse_options(char *options, int *baud, int *parity, int *bits,
 			int *flow);
@@ -412,7 +419,7 @@ int uart_resume_port(struct uart_driver *reg, struct uart_port *port);
 static inline int uart_tx_stopped(struct uart_port *port)
 {
 	struct tty_struct *tty = port->state->port.tty;
-	if (tty->stopped || port->hw_stopped)
+	if ((tty && tty->stopped) || port->hw_stopped)
 		return 1;
 	return 0;
 }
diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h
index 1e5ac4e776da..b4c04842a8c0 100644
--- a/include/uapi/linux/serial_reg.h
+++ b/include/uapi/linux/serial_reg.h
@@ -376,5 +376,13 @@
 #define UART_EXAR_TXTRG		0x0a	/* Tx FIFO trigger level write-only */
 #define UART_EXAR_RXTRG		0x0b	/* Rx FIFO trigger level write-only */
 
+/*
+ * These are definitions for the Altera ALTR_16550_F32/F64/F128
+ * Normalized from 0x100 to 0x40 because of shift by 2 (32 bit regs).
+ */
+#define UART_ALTR_AFR		0x40	/* Additional Features Register */
+#define UART_ALTR_EN_TXFIFO_LW	0x01	/* Enable the TX FIFO Low Watermark */
+#define UART_ALTR_TX_LOW	0x41	/* Tx FIFO Low Watermark */
+
 #endif /* _LINUX_SERIAL_REG_H */