Merge tag 'regulator-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "The major thing here is the addition of some helpers to factor code
  out of drivers, making a fair proportion of regulators much more just
  data rather than code which is nice.

  - Helpers in the core for regulators using regmap, providing generic
    implementations of the enable and voltage selection operations which
    just need data to describe them in the drivers.
  - Split out voltage mapping and voltage setting, allowing many more
    drivers to take advantage of the infrastructure for selectors.
  - Loads and loads of cleanups from Axel Lin once again, including many
    changes to take advantage of the above new framework features
  - New drivers for Ricoh RC5T583, TI TPS62362, TI TPS62363, TI
    TPS65913, TI TWL6035 and TI TWL6037.

  Some of the registration changes to support the core refactoring
  caused so many conflicts that eventually topic branches were abandoned
  for this release."

* tag 'regulator-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (227 commits)
  regulator: tps65910: use of_node of matched regulator being register
  regulator: tps65910: dt: support when "regulators" node found
  regulator: tps65910: add error message in case of failure
  regulator: tps62360: dt: initialize of_node param for regulator register.
  regulator: tps65910: use devm_* for memory allocation
  regulator: tps65910: use small letter for regulator names
  mfd: tpx6586x:  Depend on regulator
  regulator: regulator for Palmas Kconfig
  regulator: regulator driver for Palmas series chips
  regulator: Enable Device Tree for the db8500-prcmu regulator driver
  regulator: db8500-prcmu: Separate regulator registration from probe
  regulator: ab3100: Use regulator_map_voltage_iterate()
  regulator: tps65217: Convert to set_voltage_sel and map_voltage
  regulator: Enable the ab8500 for Device Tree
  regulator: ab8500: Split up probe() into manageable pieces
  regulator: max8925: Remove check_range function and max_uV from struct rc5t583_regulator_info
  regulator: max8649: Remove unused check_range() function
  regulator: rc5t583: Remove max_uV from struct rc5t583_regulator_info
  regulator: da9052: Convert to set_voltage_sel and map_voltage
  regulator: max8952: Use devm_kzalloc
  ...

11 files changed, 225 insertions, 15 deletions

diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
index 1f90de0cfdbe..3993477103a5 100644
--- a/include/linux/i2c/twl.h
+++ b/include/linux/i2c/twl.h
@@ -171,8 +171,6 @@ static inline int twl_class_is_ ##class(void)	\
 TWL_CLASS_IS(4030, TWL4030_CLASS_ID)
 TWL_CLASS_IS(6030, TWL6030_CLASS_ID)
 
-#define TWL6025_SUBCLASS	BIT(4)  /* TWL6025 has changed registers */
-
 /*
  * Read and write single 8-bit registers
  */
@@ -746,6 +744,17 @@ struct twl_regulator_driver_data {
 	void		*data;
 	unsigned long	features;
 };
+/* chip-specific feature flags, for twl_regulator_driver_data.features */
+#define TWL4030_VAUX2		BIT(0)	/* pre-5030 voltage ranges */
+#define TPS_SUBSET		BIT(1)	/* tps659[23]0 have fewer LDOs */
+#define TWL5031			BIT(2)  /* twl5031 has different registers */
+#define TWL6030_CLASS		BIT(3)	/* TWL6030 class */
+#define TWL6025_SUBCLASS	BIT(4)  /* TWL6025 has changed registers */
+#define TWL4030_ALLOW_UNSUPPORTED BIT(5) /* Some voltages are possible
+					  * but not officially supported.
+					  * This flag is necessary to
+					  * enable them.
+					  */
 
 /*----------------------------------------------------------------------*/
 
diff --git a/include/linux/mfd/rc5t583.h b/include/linux/mfd/rc5t583.h
index 0b64b19d81ab..c42fe92a727d 100644
--- a/include/linux/mfd/rc5t583.h
+++ b/include/linux/mfd/rc5t583.h
@@ -250,6 +250,26 @@ enum {
 	RC5T583_EXT_PWRREQ2_CONTROL = 0x2,
 };
 
+enum {
+	RC5T583_REGULATOR_DC0,
+	RC5T583_REGULATOR_DC1,
+	RC5T583_REGULATOR_DC2,
+	RC5T583_REGULATOR_DC3,
+	RC5T583_REGULATOR_LDO0,
+	RC5T583_REGULATOR_LDO1,
+	RC5T583_REGULATOR_LDO2,
+	RC5T583_REGULATOR_LDO3,
+	RC5T583_REGULATOR_LDO4,
+	RC5T583_REGULATOR_LDO5,
+	RC5T583_REGULATOR_LDO6,
+	RC5T583_REGULATOR_LDO7,
+	RC5T583_REGULATOR_LDO8,
+	RC5T583_REGULATOR_LDO9,
+
+	/* Should be last entry */
+	RC5T583_REGULATOR_MAX,
+};
+
 struct rc5t583 {
 	struct device	*dev;
 	struct regmap	*regmap;
@@ -273,11 +293,20 @@ struct rc5t583 {
  * The board specific data is provided through this structure.
  * @irq_base: Irq base number on which this device registers their interrupts.
  * @enable_shutdown: Enable shutdown through the input pin "shutdown".
+ * @regulator_deepsleep_slot: The slot number on which device goes to sleep
+ *		in device sleep mode.
+ * @regulator_ext_pwr_control: External power request regulator control. The
+ *		regulator output enable/disable is controlled by the external
+ *		power request input state.
+ * @reg_init_data: Regulator init data.
  */
 
 struct rc5t583_platform_data {
 	int		irq_base;
 	bool		enable_shutdown;
+	int		regulator_deepsleep_slot[RC5T583_REGULATOR_MAX];
+	unsigned long	regulator_ext_pwr_control[RC5T583_REGULATOR_MAX];
+	struct regulator_init_data *reg_init_data[RC5T583_REGULATOR_MAX];
 };
 
 static inline int rc5t583_write(struct device *dev, uint8_t reg, uint8_t val)
diff --git a/include/linux/mfd/s5m87xx/s5m-core.h b/include/linux/mfd/s5m87xx/s5m-core.h
index a7480b57f92d..21603b42f22f 100644
--- a/include/linux/mfd/s5m87xx/s5m-core.h
+++ b/include/linux/mfd/s5m87xx/s5m-core.h
@@ -335,6 +335,7 @@ extern int s5m_reg_update(struct s5m87xx_dev *s5m87xx, u8 reg, u8 val, u8 mask);
 
 struct s5m_platform_data {
 	struct s5m_regulator_data	*regulators;
+	struct s5m_opmode_data		*opmode;
 	int				device_type;
 	int				num_regulators;
 
diff --git a/include/linux/mfd/s5m87xx/s5m-pmic.h b/include/linux/mfd/s5m87xx/s5m-pmic.h
index a72a5d27e62e..7c719f20f58a 100644
--- a/include/linux/mfd/s5m87xx/s5m-pmic.h
+++ b/include/linux/mfd/s5m87xx/s5m-pmic.h
@@ -58,6 +58,8 @@ enum s5m8767_regulators {
 	S5M8767_REG_MAX,
 };
 
+#define S5M8767_ENCTRL_SHIFT  6
+
 /* S5M8763 regulator ids */
 enum s5m8763_regulators {
 	S5M8763_LDO1,
@@ -97,4 +99,31 @@ struct s5m_regulator_data {
 	struct regulator_init_data	*initdata;
 };
 
+/*
+ * s5m_opmode_data - regulator operation mode data
+ * @id: regulator id
+ * @mode: regulator operation mode
+ */
+struct s5m_opmode_data {
+	int id;
+	int mode;
+};
+
+/*
+ * s5m regulator operation mode
+ * S5M_OPMODE_OFF	Regulator always OFF
+ * S5M_OPMODE_ON	Regulator always ON
+ * S5M_OPMODE_LOWPOWER  Regulator is on in low-power mode
+ * S5M_OPMODE_SUSPEND   Regulator is changed by PWREN pin
+ *			If PWREN is high, regulator is on
+ *			If PWREN is low, regulator is off
+ */
+
+enum s5m_opmode {
+	S5M_OPMODE_OFF,
+	S5M_OPMODE_ON,
+	S5M_OPMODE_LOWPOWER,
+	S5M_OPMODE_SUSPEND,
+};
+
 #endif /*  __LINUX_MFD_S5M_PMIC_H */
diff --git a/include/linux/mfd/tps65090.h b/include/linux/mfd/tps65090.h
index 38e31c55adbb..6bc31d854626 100644
--- a/include/linux/mfd/tps65090.h
+++ b/include/linux/mfd/tps65090.h
@@ -22,6 +22,19 @@
 #ifndef __LINUX_MFD_TPS65090_H
 #define __LINUX_MFD_TPS65090_H
 
+#include <linux/irq.h>
+
+struct tps65090 {
+	struct mutex		lock;
+	struct device		*dev;
+	struct i2c_client	*client;
+	struct regmap		*rmap;
+	struct irq_chip		irq_chip;
+	struct mutex		irq_lock;
+	int			irq_base;
+	unsigned int		id;
+};
+
 struct tps65090_subdev_info {
 	int		id;
 	const char	*name;
diff --git a/include/linux/mfd/tps6586x.h b/include/linux/mfd/tps6586x.h
index b19176eab44d..f350fd0ba1df 100644
--- a/include/linux/mfd/tps6586x.h
+++ b/include/linux/mfd/tps6586x.h
@@ -68,6 +68,7 @@ struct tps6586x_subdev_info {
 	int		id;
 	const char	*name;
 	void		*platform_data;
+	struct device_node *of_node;
 };
 
 struct tps6586x_platform_data {
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index fa8b55b8191c..b0432cc2b169 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -19,6 +19,7 @@
 #include <linux/notifier.h>
 #include <linux/regulator/consumer.h>
 
+struct regmap;
 struct regulator_dev;
 struct regulator_init_data;
 
@@ -45,6 +46,7 @@ enum regulator_status {
  *               The driver should select the voltage closest to min_uV.
  * @set_voltage_sel: Set the voltage for the regulator using the specified
  *                   selector.
+ * @map_voltage: Convert a voltage into a selector
  * @get_voltage: Return the currently configured voltage for the regulator.
  * @get_voltage_sel: Return the currently configured voltage selector for the
  *                   regulator.
@@ -90,6 +92,7 @@ struct regulator_ops {
 	/* get/set regulator voltage */
 	int (*set_voltage) (struct regulator_dev *, int min_uV, int max_uV,
 			    unsigned *selector);
+	int (*map_voltage)(struct regulator_dev *, int min_uV, int max_uV);
 	int (*set_voltage_sel) (struct regulator_dev *, unsigned selector);
 	int (*get_voltage) (struct regulator_dev *);
 	int (*get_voltage_sel) (struct regulator_dev *);
@@ -148,19 +151,30 @@ enum regulator_type {
 };
 
 /**
- * struct regulator_desc - Regulator descriptor
+ * struct regulator_desc - Static regulator descriptor
  *
- * Each regulator registered with the core is described with a structure of
- * this type.
+ * Each regulator registered with the core is described with a
+ * structure of this type and a struct regulator_config.  This
+ * structure contains the non-varying parts of the regulator
+ * description.
  *
  * @name: Identifying name for the regulator.
  * @supply_name: Identifying the regulator supply
  * @id: Numerical identifier for the regulator.
- * @n_voltages: Number of selectors available for ops.list_voltage().
  * @ops: Regulator operations table.
  * @irq: Interrupt number for the regulator.
  * @type: Indicates if the regulator is a voltage or current regulator.
  * @owner: Module providing the regulator, used for refcounting.
+ *
+ * @n_voltages: Number of selectors available for ops.list_voltage().
+ *
+ * @min_uV: Voltage given by the lowest selector (if linear mapping)
+ * @uV_step: Voltage increase with each selector (if linear mapping)
+ *
+ * @vsel_reg: Register for selector when using regulator_regmap_X_voltage_
+ * @vsel_mask: Mask for register bitfield used for selector
+ * @enable_reg: Register for control when using regmap enable/disable ops
+ * @enable_mask: Mask for control when using regmap enable/disable ops
  */
 struct regulator_desc {
 	const char *name;
@@ -171,6 +185,36 @@ struct regulator_desc {
 	int irq;
 	enum regulator_type type;
 	struct module *owner;
+
+	unsigned int min_uV;
+	unsigned int uV_step;
+
+	unsigned int vsel_reg;
+	unsigned int vsel_mask;
+	unsigned int enable_reg;
+	unsigned int enable_mask;
+};
+
+/**
+ * struct regulator_config - Dynamic regulator descriptor
+ *
+ * Each regulator registered with the core is described with a
+ * structure of this type and a struct regulator_desc.  This structure
+ * contains the runtime variable parts of the regulator description.
+ *
+ * @dev: struct device for the regulator
+ * @init_data: platform provided init data, passed through by driver
+ * @driver_data: private regulator data
+ * @of_node: OpenFirmware node to parse for device tree bindings (may be
+ *           NULL).
+ * @regmap: regmap to use for core regmap helpers
+ */
+struct regulator_config {
+	struct device *dev;
+	const struct regulator_init_data *init_data;
+	void *driver_data;
+	struct device_node *of_node;
+	struct regmap *regmap;
 };
 
 /*
@@ -184,7 +228,7 @@ struct regulator_desc {
  * no other direct access).
  */
 struct regulator_dev {
-	struct regulator_desc *desc;
+	const struct regulator_desc *desc;
 	int exclusive;
 	u32 use_count;
 	u32 open_count;
@@ -201,6 +245,7 @@ struct regulator_dev {
 	struct device dev;
 	struct regulation_constraints *constraints;
 	struct regulator *supply;	/* for tree */
+	struct regmap *regmap;
 
 	struct delayed_work disable_work;
 	int deferred_disables;
@@ -210,9 +255,9 @@ struct regulator_dev {
 	struct dentry *debugfs;
 };
 
-struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
-	struct device *dev, const struct regulator_init_data *init_data,
-	void *driver_data, struct device_node *of_node);
+struct regulator_dev *
+regulator_register(const struct regulator_desc *regulator_desc,
+		   const struct regulator_config *config);
 void regulator_unregister(struct regulator_dev *rdev);
 
 int regulator_notifier_call_chain(struct regulator_dev *rdev,
@@ -224,6 +269,18 @@ int rdev_get_id(struct regulator_dev *rdev);
 
 int regulator_mode_to_status(unsigned int);
 
+int regulator_list_voltage_linear(struct regulator_dev *rdev,
+				  unsigned int selector);
+int regulator_map_voltage_linear(struct regulator_dev *rdev,
+				  int min_uV, int max_uV);
+int regulator_map_voltage_iterate(struct regulator_dev *rdev,
+				  int min_uV, int max_uV);
+int regulator_get_voltage_sel_regmap(struct regulator_dev *rdev);
+int regulator_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned sel);
+int regulator_is_enabled_regmap(struct regulator_dev *rdev);
+int regulator_enable_regmap(struct regulator_dev *rdev);
+int regulator_disable_regmap(struct regulator_dev *rdev);
+
 void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data);
 
 #endif
diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h
index 936a7d8c11a9..f83f7440b488 100644
--- a/include/linux/regulator/fixed.h
+++ b/include/linux/regulator/fixed.h
@@ -26,6 +26,12 @@ struct regulator_init_data;
  * @gpio:		GPIO to use for enable control
  * 			set to -EINVAL if not used
  * @startup_delay:	Start-up time in microseconds
+ * @gpio_is_open_drain: Gpio pin is open drain or normal type.
+ *			If it is open drain type then HIGH will be set
+ *			through PULL-UP with setting gpio as input
+ *			and low will be set as gpio-output with driven
+ *			to low. For non-open-drain case, the gpio will
+ *			will be in output and drive to low/high accordingly.
  * @enable_high:	Polarity of enable GPIO
  *			1 = Active high, 0 = Active low
  * @enabled_at_boot:	Whether regulator has been enabled at
@@ -43,6 +49,7 @@ struct fixed_voltage_config {
 	int microvolts;
 	int gpio;
 	unsigned startup_delay;
+	unsigned gpio_is_open_drain:1;
 	unsigned enable_high:1;
 	unsigned enabled_at_boot:1;
 	struct regulator_init_data *init_data;
diff --git a/include/linux/regulator/of_regulator.h b/include/linux/regulator/of_regulator.h
index 769704f296e5..f9217965aaa3 100644
--- a/include/linux/regulator/of_regulator.h
+++ b/include/linux/regulator/of_regulator.h
@@ -6,10 +6,20 @@
 #ifndef __LINUX_OF_REG_H
 #define __LINUX_OF_REG_H
 
+struct of_regulator_match {
+	const char *name;
+	void *driver_data;
+	struct regulator_init_data *init_data;
+	struct device_node *of_node;
+};
+
 #if defined(CONFIG_OF)
 extern struct regulator_init_data
 	*of_get_regulator_init_data(struct device *dev,
 				    struct device_node *node);
+extern int of_regulator_match(struct device *dev, struct device_node *node,
+			      struct of_regulator_match *matches,
+			      unsigned int num_matches);
 #else
 static inline struct regulator_init_data
 	*of_get_regulator_init_data(struct device *dev,
@@ -17,6 +27,14 @@ static inline struct regulator_init_data
 {
 	return NULL;
 }
+
+static inline int of_regulator_match(struct device *dev,
+				     struct device_node *node,
+				     struct of_regulator_match *matches,
+				     unsigned int num_matches)
+{
+	return 0;
+}
 #endif /* CONFIG_OF */
 
 #endif /* __LINUX_OF_REG_H */
diff --git a/include/linux/regulator/tps62360.h b/include/linux/regulator/tps62360.h
index 6a5c1b2c751e..a4c49394c497 100644
--- a/include/linux/regulator/tps62360.h
+++ b/include/linux/regulator/tps62360.h
@@ -26,13 +26,10 @@
 #ifndef __LINUX_REGULATOR_TPS62360_H
 #define __LINUX_REGULATOR_TPS62360_H
 
-#include <linux/regulator/machine.h>
-
 /*
  * struct tps62360_regulator_platform_data - tps62360 regulator platform data.
  *
  * @reg_init_data: The regulator init data.
- * @en_force_pwm: Enable force pwm or not.
  * @en_discharge: Enable discharge the output capacitor via internal
  *                register.
  * @en_internal_pulldn: internal pull down enable or not.
@@ -44,8 +41,7 @@
  * @vsel1_def_state: Default state of vsel1. 1 if it is high else 0.
  */
 struct tps62360_regulator_platform_data {
-	struct regulator_init_data reg_init_data;
-	bool en_force_pwm;
+	struct regulator_init_data *reg_init_data;
 	bool en_discharge;
 	bool en_internal_pulldn;
 	int vsel0_gpio;
diff --git a/include/linux/regulator/tps65090-regulator.h b/include/linux/regulator/tps65090-regulator.h
new file mode 100644
index 000000000000..0fa04b64db3e
--- /dev/null
+++ b/include/linux/regulator/tps65090-regulator.h
@@ -0,0 +1,50 @@
+/*
+ * Regulator driver interface for TI TPS65090 PMIC family
+ *
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __REGULATOR_TPS65090_H
+#define __REGULATOR_TPS65090_H
+
+#include <linux/regulator/machine.h>
+
+#define tps65090_rails(_name) "tps65090_"#_name
+
+enum {
+	TPS65090_ID_DCDC1,
+	TPS65090_ID_DCDC2,
+	TPS65090_ID_DCDC3,
+	TPS65090_ID_FET1,
+	TPS65090_ID_FET2,
+	TPS65090_ID_FET3,
+	TPS65090_ID_FET4,
+	TPS65090_ID_FET5,
+	TPS65090_ID_FET6,
+	TPS65090_ID_FET7,
+};
+
+/*
+ * struct tps65090_regulator_platform_data
+ *
+ * @regulator: The regulator init data.
+ * @slew_rate_uV_per_us: Slew rate microvolt per microsec.
+ */
+
+struct tps65090_regulator_platform_data {
+	struct regulator_init_data regulator;
+};
+
+#endif	/* __REGULATOR_TPS65090_H */