nfs: disintegrate UAPI for nfs

This is to complete part of the Userspace API (UAPI) disintegration for which
the preparatory patches were pulled recently.  After these patches, userspace
headers will be segregated into:

        include/uapi/linux/.../foo.h

for the userspace interface stuff, and:

        include/linux/.../foo.h

for the strictly kernel internal stuff.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>

1 files changed, 17 insertions, 16 deletions

diff --git a/net/irda/ircomm/ircomm_tty_ioctl.c b/net/irda/ircomm/ircomm_tty_ioctl.c
index d0667d68351d..b343f50dc8d7 100644
--- a/net/irda/ircomm/ircomm_tty_ioctl.c
+++ b/net/irda/ircomm/ircomm_tty_ioctl.c
@@ -52,17 +52,18 @@
  *    Change speed of the driver. If the remote device is a DCE, then this
  *    should make it change the speed of its serial port
  */
-static void ircomm_tty_change_speed(struct ircomm_tty_cb *self)
+static void ircomm_tty_change_speed(struct ircomm_tty_cb *self,
+		struct tty_struct *tty)
 {
 	unsigned int cflag, cval;
 	int baud;
 
 	IRDA_DEBUG(2, "%s()\n", __func__ );
 
-	if (!self->tty || !self->tty->termios || !self->ircomm)
+	if (!self->ircomm)
 		return;
 
-	cflag = self->tty->termios->c_cflag;
+	cflag = tty->termios.c_cflag;
 
 	/*  byte size and parity */
 	switch (cflag & CSIZE) {
@@ -81,7 +82,7 @@ static void ircomm_tty_change_speed(struct ircomm_tty_cb *self)
 		cval |= IRCOMM_PARITY_EVEN;
 
 	/* Determine divisor based on baud rate */
-	baud = tty_get_baud_rate(self->tty);
+	baud = tty_get_baud_rate(tty);
 	if (!baud)
 		baud = 9600;	/* B0 transition handled in rs_set_termios */
 
@@ -90,19 +91,19 @@ static void ircomm_tty_change_speed(struct ircomm_tty_cb *self)
 
 	/* CTS flow control flag and modem status interrupts */
 	if (cflag & CRTSCTS) {
-		self->flags |= ASYNC_CTS_FLOW;
+		self->port.flags |= ASYNC_CTS_FLOW;
 		self->settings.flow_control |= IRCOMM_RTS_CTS_IN;
 		/* This got me. Bummer. Jean II */
 		if (self->service_type == IRCOMM_3_WIRE_RAW)
 			IRDA_WARNING("%s(), enabling RTS/CTS on link that doesn't support it (3-wire-raw)\n", __func__);
 	} else {
-		self->flags &= ~ASYNC_CTS_FLOW;
+		self->port.flags &= ~ASYNC_CTS_FLOW;
 		self->settings.flow_control &= ~IRCOMM_RTS_CTS_IN;
 	}
 	if (cflag & CLOCAL)
-		self->flags &= ~ASYNC_CHECK_CD;
+		self->port.flags &= ~ASYNC_CHECK_CD;
 	else
-		self->flags |= ASYNC_CHECK_CD;
+		self->port.flags |= ASYNC_CHECK_CD;
 #if 0
 	/*
 	 * Set up parity check flag
@@ -148,18 +149,18 @@ void ircomm_tty_set_termios(struct tty_struct *tty,
 			    struct ktermios *old_termios)
 {
 	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
-	unsigned int cflag = tty->termios->c_cflag;
+	unsigned int cflag = tty->termios.c_cflag;
 
 	IRDA_DEBUG(2, "%s()\n", __func__ );
 
 	if ((cflag == old_termios->c_cflag) &&
-	    (RELEVANT_IFLAG(tty->termios->c_iflag) ==
+	    (RELEVANT_IFLAG(tty->termios.c_iflag) ==
 	     RELEVANT_IFLAG(old_termios->c_iflag)))
 	{
 		return;
 	}
 
-	ircomm_tty_change_speed(self);
+	ircomm_tty_change_speed(self, tty);
 
 	/* Handle transition to B0 status */
 	if ((old_termios->c_cflag & CBAUD) &&
@@ -172,7 +173,7 @@ void ircomm_tty_set_termios(struct tty_struct *tty,
 	if (!(old_termios->c_cflag & CBAUD) &&
 	    (cflag & CBAUD)) {
 		self->settings.dte |= IRCOMM_DTR;
-		if (!(tty->termios->c_cflag & CRTSCTS) ||
+		if (!(tty->termios.c_cflag & CRTSCTS) ||
 		    !test_bit(TTY_THROTTLED, &tty->flags)) {
 			self->settings.dte |= IRCOMM_RTS;
 		}
@@ -181,7 +182,7 @@ void ircomm_tty_set_termios(struct tty_struct *tty,
 
 	/* Handle turning off CRTSCTS */
 	if ((old_termios->c_cflag & CRTSCTS) &&
-	    !(tty->termios->c_cflag & CRTSCTS))
+	    !(tty->termios.c_cflag & CRTSCTS))
 	{
 		tty->hw_stopped = 0;
 		ircomm_tty_start(tty);
@@ -270,10 +271,10 @@ static int ircomm_tty_get_serial_info(struct ircomm_tty_cb *self,
 
 	memset(&info, 0, sizeof(info));
 	info.line = self->line;
-	info.flags = self->flags;
+	info.flags = self->port.flags;
 	info.baud_base = self->settings.data_rate;
-	info.close_delay = self->close_delay;
-	info.closing_wait = self->closing_wait;
+	info.close_delay = self->port.close_delay;
+	info.closing_wait = self->port.closing_wait;
 
 	/* For compatibility  */
 	info.type = PORT_16550A;