Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/perex/alsa

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/perex/alsa: (299 commits)
  [ALSA] version 1.0.16rc2
  [ALSA] hda: fix Mic in as output
  [ALSA] emu10k1 - Another EMU0404 Board ID
  [ALSA] emu10k1 - Fix kthread handling at resume
  [ALSA] emu10k1: General cleanup, add new locks, fix alsa bug#3501, kernel bug#9304.
  [ALSA] emu10k1 - Use enum for emu_model types
  [ALSA] emu10k1 - Don't create emu1010 controls for non-emu boards
  [ALSA] emu10k1 - 1616(M) cardbus improvements
  [ALSA] snd:emu10k1: E-Mu updates. Fixes to firmware loading and support for 0404.
  [ALSA] emu10k1: Add comments regarding E-Mu ins and outs.
  [ALSA] oxygen: revert SPI clock frequency change for AK4396/WM8785
  [ALSA] es1938 - improve capture hw pointer reads
  [ALSA] HDA-Intel - Add support for Intel SCH
  [ALSA] hda: Add GPIO mute support to STAC9205
  [ALSA] hda-codec - Add Dell T3400 support
  [ALSA] hda-codec - Add model for HP DV9553EG laptop
  [ALSA] hda-codec - Control SPDIF as slave
  [ALSA] hda_intel: ALSA HD Audio patch for Intel ICH10 DeviceID's
  [ALSA] Fix Oops with PCM OSS sync
  [ALSA] hda-codec - Add speaker automute to ALC262 HP models
  ...

1 files changed, 2 insertions, 35 deletions

diff --git a/sound/isa/opl3sa2.c b/sound/isa/opl3sa2.c
index 59af9ab7191f..854a9f74b466 100644
--- a/sound/isa/opl3sa2.c
+++ b/sound/isa/opl3sa2.c
@@ -19,7 +19,6 @@
  *
  */
 
-#include <sound/driver.h>
 #include <linux/init.h>
 #include <linux/err.h>
 #include <linux/isa.h>
@@ -610,39 +609,8 @@ static int snd_opl3sa2_resume(struct snd_card *card)
 static int __devinit snd_opl3sa2_pnp(int dev, struct snd_opl3sa2 *chip,
 				     struct pnp_dev *pdev)
 {
-	struct pnp_resource_table * cfg;
-	int err;
-
-	cfg = kmalloc(sizeof(struct pnp_resource_table), GFP_KERNEL);
-	if (!cfg) {
-		snd_printk(KERN_ERR PFX "cannot allocate pnp cfg\n");
-		return -ENOMEM;
-	}
-	/* PnP initialization */
-	pnp_init_resource_table(cfg);
-	if (sb_port[dev] != SNDRV_AUTO_PORT)
-		pnp_resource_change(&cfg->port_resource[0], sb_port[dev], 16);
-	if (wss_port[dev] != SNDRV_AUTO_PORT)
-		pnp_resource_change(&cfg->port_resource[1], wss_port[dev], 8);
-	if (fm_port[dev] != SNDRV_AUTO_PORT)
-		pnp_resource_change(&cfg->port_resource[2], fm_port[dev], 4);
-	if (midi_port[dev] != SNDRV_AUTO_PORT)
-		pnp_resource_change(&cfg->port_resource[3], midi_port[dev], 2);
-	if (port[dev] != SNDRV_AUTO_PORT)
-		pnp_resource_change(&cfg->port_resource[4], port[dev], 2);
-	if (dma1[dev] != SNDRV_AUTO_DMA)
-		pnp_resource_change(&cfg->dma_resource[0], dma1[dev], 1);
-	if (dma2[dev] != SNDRV_AUTO_DMA)
-		pnp_resource_change(&cfg->dma_resource[1], dma2[dev], 1);
-	if (irq[dev] != SNDRV_AUTO_IRQ)
-		pnp_resource_change(&cfg->irq_resource[0], irq[dev], 1);
-	err = pnp_manual_config_dev(pdev, cfg, 0);
-	if (err < 0)
-		snd_printk(KERN_WARNING "PnP manual resources are invalid, using auto config\n");
-	err = pnp_activate_dev(pdev);
-	if (err < 0) {
-		kfree(cfg);
-		snd_printk(KERN_ERR "PnP configure failure (out of resources?) err = %d\n", err);
+	if (pnp_activate_dev(pdev) < 0) {
+		snd_printk(KERN_ERR "PnP configure failure (out of resources?)\n");
 		return -EBUSY;
 	}
 	sb_port[dev] = pnp_port_start(pdev, 0);
@@ -657,7 +625,6 @@ static int __devinit snd_opl3sa2_pnp(int dev, struct snd_opl3sa2 *chip,
 		pnp_device_is_pnpbios(pdev) ? "BIOS" : "ISA", sb_port[dev], wss_port[dev], fm_port[dev], midi_port[dev]);
 	snd_printdd("%sPnP OPL3-SA: control port=0x%lx, dma1=%i, dma2=%i, irq=%i\n",
 		pnp_device_is_pnpbios(pdev) ? "BIOS" : "ISA", port[dev], dma1[dev], dma2[dev], irq[dev]);
-	kfree(cfg);
 	return 0;
 }
 #endif /* CONFIG_PNP */