[PATCH] The scheduled removal of some OSS drivers

This patch contains the scheduled removal of OSS drivers that:
- have ALSA drivers for the same hardware without known regressions and
- whose Kconfig options have been removed in 2.6.17.

[michal.k.k.piotrowski@gmail.com: build fix]
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 0 insertions, 3735 deletions

diff --git a/sound/oss/ali5455.c b/sound/oss/ali5455.c
deleted file mode 100644
index 70dcd703a66f..000000000000
--- a/sound/oss/ali5455.c
+++ /dev/null
@@ -1,3735 +0,0 @@
-/*
- *	ALI  ali5455 and friends ICH driver for Linux
- *	LEI HU <Lei_Hu@ali.com.tw>
- *
- *  Built from:
- *	drivers/sound/i810_audio
- *
- *  	The ALi 5455 is similar but not quite identical to the Intel ICH
- *	series of controllers. Its easier to keep the driver separated from
- *	the i810 driver.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- *
- *	You should have received a copy of the GNU General Public License
- *	along with this program; if not, write to the Free Software
- *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- *	ALi 5455 theory of operation
- *
- *	The chipset provides three DMA channels that talk to an AC97
- *	CODEC (AC97 is a digital/analog mixer standard). At its simplest
- *	you get 48Khz audio with basic volume and mixer controls. At the
- *	best you get rate adaption in the codec. We set the card up so
- *	that we never take completion interrupts but instead keep the card
- *	chasing its tail around a ring buffer. This is needed for mmap
- *	mode audio and happens to work rather well for non-mmap modes too.
- *
- *	The board has one output channel for PCM audio (supported) and
- *	a stereo line in and mono microphone input. Again these are normally
- *	locked to 48Khz only. Right now recording is not finished.
- *
- *	There is no midi support, no synth support. Use timidity. To get
- *	esd working you need to use esd -r 48000 as it won't probe 48KHz
- *	by default. mpg123 can't handle 48Khz only audio so use xmms.
- *
- *	If you need to force a specific rate set the clocking= option
- *
- */
-
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/ctype.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/delay.h>
-#include <linux/sound.h>
-#include <linux/slab.h>
-#include <linux/soundcard.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <linux/init.h>
-#include <linux/poll.h>
-#include <linux/spinlock.h>
-#include <linux/smp_lock.h>
-#include <linux/ac97_codec.h>
-#include <linux/interrupt.h>
-#include <linux/mutex.h>
-
-#include <asm/uaccess.h>
-
-#ifndef PCI_DEVICE_ID_ALI_5455
-#define PCI_DEVICE_ID_ALI_5455	0x5455
-#endif
-
-#ifndef PCI_VENDOR_ID_ALI
-#define PCI_VENDOR_ID_ALI	0x10b9
-#endif
-
-static int strict_clocking = 0;
-static unsigned int clocking = 0;
-static unsigned int codec_pcmout_share_spdif_locked = 0;
-static unsigned int codec_independent_spdif_locked = 0;
-static unsigned int controller_pcmout_share_spdif_locked = 0;
-static unsigned int controller_independent_spdif_locked = 0;
-static unsigned int globel = 0;
-
-#define ADC_RUNNING	1
-#define DAC_RUNNING	2
-#define CODEC_SPDIFOUT_RUNNING 8
-#define CONTROLLER_SPDIFOUT_RUNNING 4
-
-#define SPDIF_ENABLE_OUTPUT	4	/* bits 0,1 are PCM */
-
-#define ALI5455_FMT_16BIT	1
-#define ALI5455_FMT_STEREO	2
-#define ALI5455_FMT_MASK	3
-
-#define SPDIF_ON	0x0004
-#define SURR_ON		0x0010
-#define CENTER_LFE_ON	0x0020
-#define VOL_MUTED	0x8000
-
-
-#define ALI_SPDIF_OUT_CH_STATUS 0xbf
-/* the 810's array of pointers to data buffers */
-
-struct sg_item {
-#define BUSADDR_MASK	0xFFFFFFFE
-	u32 busaddr;
-#define CON_IOC 	0x80000000	/* interrupt on completion */
-#define CON_BUFPAD	0x40000000	/* pad underrun with last sample, else 0 */
-#define CON_BUFLEN_MASK	0x0000ffff	/* buffer length in samples */
-	u32 control;
-};
-
-/* an instance of the ali channel */
-#define SG_LEN 32
-struct ali_channel {
-	/* these sg guys should probably be allocated
-	   separately as nocache. Must be 8 byte aligned */
-	struct sg_item sg[SG_LEN];	/* 32*8 */
-	u32 offset;		/* 4 */
-	u32 port;		/* 4 */
-	u32 used;
-	u32 num;
-};
-
-/*
- * we have 3 separate dma engines.  pcm in, pcm out, and mic.
- * each dma engine has controlling registers.  These goofy
- * names are from the datasheet, but make it easy to write
- * code while leafing through it.
- */
-
-#define ENUM_ENGINE(PRE,DIG) 									\
-enum {												\
-	PRE##_BDBAR =	0x##DIG##0,		/* Buffer Descriptor list Base Address */	\
-	PRE##_CIV =	0x##DIG##4,		/* Current Index Value */			\
-	PRE##_LVI =	0x##DIG##5,		/* Last Valid Index */				\
-	PRE##_SR =	0x##DIG##6,		/* Status Register */				\
-	PRE##_PICB =	0x##DIG##8,		/* Position In Current Buffer */		\
-	PRE##_CR =	0x##DIG##b		/* Control Register */				\
-}
-
-ENUM_ENGINE(OFF, 0);		/* Offsets */
-ENUM_ENGINE(PI, 4);		/* PCM In */
-ENUM_ENGINE(PO, 5);		/* PCM Out */
-ENUM_ENGINE(MC, 6);		/* Mic In */
-ENUM_ENGINE(CODECSPDIFOUT, 7);	/* CODEC SPDIF OUT  */
-ENUM_ENGINE(CONTROLLERSPDIFIN, A);	/* CONTROLLER SPDIF In */
-ENUM_ENGINE(CONTROLLERSPDIFOUT, B);	/* CONTROLLER SPDIF OUT */
-
-
-enum {
-	ALI_SCR = 0x00,		/* System Control Register */
-	ALI_SSR = 0x04,		/* System Status Register  */
-	ALI_DMACR = 0x08,	/* DMA Control Register    */
-	ALI_FIFOCR1 = 0x0c,	/* FIFO Control Register 1  */
-	ALI_INTERFACECR = 0x10,	/* Interface Control Register */
-	ALI_INTERRUPTCR = 0x14,	/* Interrupt control Register */
-	ALI_INTERRUPTSR = 0x18,	/* Interrupt  Status Register */
-	ALI_FIFOCR2 = 0x1c,	/* FIFO Control Register 2   */
-	ALI_CPR = 0x20,		/* Command Port Register     */
-	ALI_SPR = 0x24,		/* Status Port Register      */
-	ALI_FIFOCR3 = 0x2c,	/* FIFO Control Register 3  */
-	ALI_TTSR = 0x30,	/* Transmit Tag Slot Register */
-	ALI_RTSR = 0x34,	/* Receive Tag Slot  Register */
-	ALI_CSPSR = 0x38,	/* Command/Status Port Status Register */
-	ALI_CAS = 0x3c,		/* Codec Write Semaphore Register */
-	ALI_SPDIFCSR = 0xf8,	/* spdif channel status register  */
-	ALI_SPDIFICS = 0xfc	/* spdif interface control/status  */
-};
-
-// x-status register(x:pcm in ,pcm out, mic in,)
-/* interrupts for a dma engine */
-#define DMA_INT_FIFO		(1<<4)	/* fifo under/over flow */
-#define DMA_INT_COMPLETE	(1<<3)	/* buffer read/write complete and ioc set */
-#define DMA_INT_LVI		(1<<2)	/* last valid done */
-#define DMA_INT_CELV		(1<<1)	/* last valid is current */
-#define DMA_INT_DCH		(1)	/* DMA Controller Halted (happens on LVI interrupts) */	//not eqult intel
-#define DMA_INT_MASK (DMA_INT_FIFO|DMA_INT_COMPLETE|DMA_INT_LVI)
-
-/* interrupts for the whole chip */// by interrupt status register finish
-
-#define INT_SPDIFOUT   (1<<23)	/* controller spdif out INTERRUPT */
-#define INT_SPDIFIN   (1<<22)
-#define INT_CODECSPDIFOUT   (1<<19)
-#define INT_MICIN   (1<<18)
-#define INT_PCMOUT   (1<<17)
-#define INT_PCMIN   (1<<16)
-#define INT_CPRAIS   (1<<7)
-#define INT_SPRAIS   (1<<5)
-#define INT_GPIO    (1<<1)
-#define INT_MASK   (INT_SPDIFOUT|INT_CODECSPDIFOUT|INT_MICIN|INT_PCMOUT|INT_PCMIN)
-
-#define DRIVER_VERSION "0.02ac"
-
-/* magic numbers to protect our data structures */
-#define ALI5455_CARD_MAGIC		0x5072696E	/* "Prin" */
-#define ALI5455_STATE_MAGIC		0x63657373	/* "cess" */
-#define ALI5455_DMA_MASK		0xffffffff	/* DMA buffer mask for pci_alloc_consist */
-#define NR_HW_CH			5	//I think 5 channel
-
-/* maxinum number of AC97 codecs connected, AC97 2.0 defined 4 */
-#define NR_AC97		2
-
-/* Please note that an 8bit mono stream is not valid on this card, you must have a 16bit */
-/* stream at a minimum for this card to be happy */
-static const unsigned sample_size[] = { 1, 2, 2, 4 };
-/* Samples are 16bit values, so we are shifting to a word, not to a byte, hence shift */
-/* values are one less than might be expected */
-static const unsigned sample_shift[] = { -1, 0, 0, 1 };
-
-#define ALI5455
-static char *card_names[] = {
-	"ALI 5455"
-};
-
-static struct pci_device_id ali_pci_tbl[] = {
-	{PCI_VENDOR_ID_ALI, PCI_DEVICE_ID_ALI_5455,
-	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, ALI5455},
-	{0,}
-};
-
-MODULE_DEVICE_TABLE(pci, ali_pci_tbl);
-
-#ifdef CONFIG_PM
-#define PM_SUSPENDED(card) (card->pm_suspended)
-#else
-#define PM_SUSPENDED(card) (0)
-#endif
-
-/* "software" or virtual channel, an instance of opened /dev/dsp */
-struct ali_state {
-	unsigned int magic;
-	struct ali_card *card;	/* Card info */
-
-	/* single open lock mechanism, only used for recording */
-	struct mutex open_mutex;
-	wait_queue_head_t open_wait;
-
-	/* file mode */
-	mode_t open_mode;
-
-	/* virtual channel number */
-	int virt;
-
-#ifdef CONFIG_PM
-	unsigned int pm_saved_dac_rate, pm_saved_adc_rate;
-#endif
-	struct dmabuf {
-		/* wave sample stuff */
-		unsigned int rate;
-		unsigned char fmt, enable, trigger;
-
-		/* hardware channel */
-		struct ali_channel *read_channel;
-		struct ali_channel *write_channel;
-		struct ali_channel *codec_spdifout_channel;
-		struct ali_channel *controller_spdifout_channel;
-
-		/* OSS buffer management stuff */
-		void *rawbuf;
-		dma_addr_t dma_handle;
-		unsigned buforder;
-		unsigned numfrag;
-		unsigned fragshift;
-
-		/* our buffer acts like a circular ring */
-		unsigned hwptr;	/* where dma last started, updated by update_ptr */
-		unsigned swptr;	/* where driver last clear/filled, updated by read/write */
-		int count;	/* bytes to be consumed or been generated by dma machine */
-		unsigned total_bytes;	/* total bytes dmaed by hardware */
-
-		unsigned error;	/* number of over/underruns */
-		wait_queue_head_t wait;	/* put process on wait queue when no more space in buffer */
-
-		/* redundant, but makes calculations easier */
-		/* what the hardware uses */
-		unsigned dmasize;
-		unsigned fragsize;
-		unsigned fragsamples;
-
-		/* what we tell the user to expect */
-		unsigned userfrags;
-		unsigned userfragsize;
-
-		/* OSS stuff */
-		unsigned mapped:1;
-		unsigned ready:1;
-		unsigned update_flag;
-		unsigned ossfragsize;
-		unsigned ossmaxfrags;
-		unsigned subdivision;
-	} dmabuf;
-};
-
-
-struct ali_card {
-	struct ali_channel channel[5];
-	unsigned int magic;
-
-	/* We keep ali5455 cards in a linked list */
-	struct ali_card *next;
-
-	/* The ali has a certain amount of cross channel interaction
-	   so we use a single per card lock */
-	spinlock_t lock;
-	spinlock_t ac97_lock;
-
-	/* PCI device stuff */
-	struct pci_dev *pci_dev;
-	u16 pci_id;
-#ifdef CONFIG_PM
-	u16 pm_suspended;
-	int pm_saved_mixer_settings[SOUND_MIXER_NRDEVICES][NR_AC97];
-#endif
-	/* soundcore stuff */
-	int dev_audio;
-
-	/* structures for abstraction of hardware facilities, codecs, banks and channels */
-	struct ac97_codec *ac97_codec[NR_AC97];
-	struct ali_state *states[NR_HW_CH];
-
-	u16 ac97_features;
-	u16 ac97_status;
-	u16 channels;
-
-	/* hardware resources */
-	unsigned long iobase;
-
-	u32 irq;
-
-	/* Function support */
-	struct ali_channel *(*alloc_pcm_channel) (struct ali_card *);
-	struct ali_channel *(*alloc_rec_pcm_channel) (struct ali_card *);
-	struct ali_channel *(*alloc_rec_mic_channel) (struct ali_card *);
-	struct ali_channel *(*alloc_codec_spdifout_channel) (struct ali_card *);
-	struct ali_channel *(*alloc_controller_spdifout_channel) (struct  ali_card *);
-	void (*free_pcm_channel) (struct ali_card *, int chan);
-
-	/* We have a *very* long init time possibly, so use this to block */
-	/* attempts to open our devices before we are ready (stops oops'es) */
-	int initializing;
-};
-
-
-static struct ali_card *devs = NULL;
-
-static int ali_open_mixdev(struct inode *inode, struct file *file);
-static int ali_ioctl_mixdev(struct inode *inode, struct file *file,
-			    unsigned int cmd, unsigned long arg);
-static u16 ali_ac97_get(struct ac97_codec *dev, u8 reg);
-static void ali_ac97_set(struct ac97_codec *dev, u8 reg, u16 data);
-
-static struct ali_channel *ali_alloc_pcm_channel(struct ali_card *card)
-{
-	if (card->channel[1].used == 1)
-		return NULL;
-	card->channel[1].used = 1;
-	return &card->channel[1];
-}
-
-static struct ali_channel *ali_alloc_rec_pcm_channel(struct ali_card *card)
-{
-	if (card->channel[0].used == 1)
-		return NULL;
-	card->channel[0].used = 1;
-	return &card->channel[0];
-}
-
-static struct ali_channel *ali_alloc_rec_mic_channel(struct ali_card *card)
-{
-	if (card->channel[2].used == 1)
-		return NULL;
-	card->channel[2].used = 1;
-	return &card->channel[2];
-}
-
-static struct ali_channel *ali_alloc_codec_spdifout_channel(struct ali_card *card)
-{
-	if (card->channel[3].used == 1)
-		return NULL;
-	card->channel[3].used = 1;
-	return &card->channel[3];
-}
-
-static struct ali_channel *ali_alloc_controller_spdifout_channel(struct ali_card *card)
-{
-	if (card->channel[4].used == 1)
-		return NULL;
-	card->channel[4].used = 1;
-	return &card->channel[4];
-}
-static void ali_free_pcm_channel(struct ali_card *card, int channel)
-{
-	card->channel[channel].used = 0;
-}
-
-
-//add support  codec spdif out 
-static int ali_valid_spdif_rate(struct ac97_codec *codec, int rate)
-{
-	unsigned long id = 0L;
-
-	id = (ali_ac97_get(codec, AC97_VENDOR_ID1) << 16);
-	id |= ali_ac97_get(codec, AC97_VENDOR_ID2) & 0xffff;
-	switch (id) {
-	case 0x41445361:	/* AD1886 */
-		if (rate == 48000) {
-			return 1;
-		}
-		break;
-	case 0x414c4720:	/* ALC650 */
-		if (rate == 48000) {
-			return 1;
-		}
-		break;
-	default:		/* all other codecs, until we know otherwiae */
-		if (rate == 48000 || rate == 44100 || rate == 32000) {
-			return 1;
-		}
-		break;
-	}
-	return (0);
-}
-
-/* ali_set_spdif_output
- * 
- *  Configure the S/PDIF output transmitter. When we turn on
- *  S/PDIF, we turn off the analog output. This may not be
- *  the right thing to do.
- *
- *  Assumptions:
- *     The DSP sample rate must already be set to a supported
- *     S/PDIF rate (32kHz, 44.1kHz, or 48kHz) or we abort.
- */
-static void ali_set_spdif_output(struct ali_state *state, int slots,
-				 int rate)
-{
-	int vol;
-	int aud_reg;
-	struct ac97_codec *codec = state->card->ac97_codec[0];
-
-	if (!(state->card->ac97_features & 4)) {
-		state->card->ac97_status &= ~SPDIF_ON;
-	} else {
-		if (slots == -1) {	/* Turn off S/PDIF */
-			aud_reg = ali_ac97_get(codec, AC97_EXTENDED_STATUS);
-			ali_ac97_set(codec, AC97_EXTENDED_STATUS, (aud_reg & ~AC97_EA_SPDIF));
-
-			/* If the volume wasn't muted before we turned on S/PDIF, unmute it */
-			if (!(state->card->ac97_status & VOL_MUTED)) {
-				aud_reg = ali_ac97_get(codec, AC97_MASTER_VOL_STEREO);
-				ali_ac97_set(codec, AC97_MASTER_VOL_STEREO,
-					     (aud_reg & ~VOL_MUTED));
-			}
-			state->card->ac97_status &= ~(VOL_MUTED | SPDIF_ON);
-			return;
-		}
-
-		vol = ali_ac97_get(codec, AC97_MASTER_VOL_STEREO);
-		state->card->ac97_status = vol & VOL_MUTED;
-
-		/* Set S/PDIF transmitter sample rate */
-		aud_reg = ali_ac97_get(codec, AC97_SPDIF_CONTROL);
-		switch (rate) {
-		case 32000:
-			aud_reg = (aud_reg & AC97_SC_SPSR_MASK) | AC97_SC_SPSR_32K;
-			break;
-		case 44100:
-			aud_reg = (aud_reg & AC97_SC_SPSR_MASK) | AC97_SC_SPSR_44K;
-			break;
-		case 48000:
-			aud_reg = (aud_reg & AC97_SC_SPSR_MASK) | AC97_SC_SPSR_48K;
-			break;
-		default:
-			/* turn off S/PDIF */
-			aud_reg = ali_ac97_get(codec, AC97_EXTENDED_STATUS);
-			ali_ac97_set(codec, AC97_EXTENDED_STATUS, (aud_reg & ~AC97_EA_SPDIF));
-			state->card->ac97_status &= ~SPDIF_ON;
-			return;
-		}
-
-		ali_ac97_set(codec, AC97_SPDIF_CONTROL, aud_reg);
-
-		aud_reg = ali_ac97_get(codec, AC97_EXTENDED_STATUS);
-		aud_reg = (aud_reg & AC97_EA_SLOT_MASK) | slots | AC97_EA_SPDIF;
-		ali_ac97_set(codec, AC97_EXTENDED_STATUS, aud_reg);
-
-		aud_reg = ali_ac97_get(codec, AC97_POWER_CONTROL);
-		aud_reg |= 0x0002;
-		ali_ac97_set(codec, AC97_POWER_CONTROL, aud_reg);
-		udelay(1);
-
-		state->card->ac97_status |= SPDIF_ON;
-
-		/* Check to make sure the configuration is valid */
-		aud_reg = ali_ac97_get(codec, AC97_EXTENDED_STATUS);
-		if (!(aud_reg & 0x0400)) {
-			/* turn off S/PDIF */
-			ali_ac97_set(codec, AC97_EXTENDED_STATUS, (aud_reg & ~AC97_EA_SPDIF));
-			state->card->ac97_status &= ~SPDIF_ON;
-			return;
-		}
-		if (codec_independent_spdif_locked > 0) {
-			aud_reg = ali_ac97_get(codec, 0x6a);
-			ali_ac97_set(codec, 0x6a, (aud_reg & 0xefff));
-		}
-		/* Mute the analog output */
-		/* Should this only mute the PCM volume??? */
-	}
-}
-
-/* ali_set_dac_channels
- *
- *  Configure the codec's multi-channel DACs
- *
- *  The logic is backwards. Setting the bit to 1 turns off the DAC. 
- *
- *  What about the ICH? We currently configure it using the
- *  SNDCTL_DSP_CHANNELS ioctl.  If we're turnning on the DAC, 
- *  does that imply that we want the ICH set to support
- *  these channels?
- *  
- *  TODO:
- *    vailidate that the codec really supports these DACs
- *    before turning them on. 
- */
-static void ali_set_dac_channels(struct ali_state *state, int channel)
-{
-	int aud_reg;
-	struct ac97_codec *codec = state->card->ac97_codec[0];
-
-	aud_reg = ali_ac97_get(codec, AC97_EXTENDED_STATUS);
-	aud_reg |= AC97_EA_PRI | AC97_EA_PRJ | AC97_EA_PRK;
-	state->card->ac97_status &= ~(SURR_ON | CENTER_LFE_ON);
-
-	switch (channel) {
-	case 2:		/* always enabled */
-		break;
-	case 4:
-		aud_reg &= ~AC97_EA_PRJ;
-		state->card->ac97_status |= SURR_ON;
-		break;
-	case 6:
-		aud_reg &= ~(AC97_EA_PRJ | AC97_EA_PRI | AC97_EA_PRK);
-		state->card->ac97_status |= SURR_ON | CENTER_LFE_ON;
-		break;
-	default:
-		break;
-	}
-	ali_ac97_set(codec, AC97_EXTENDED_STATUS, aud_reg);
-
-}
-
-/* set playback sample rate */
-static unsigned int ali_set_dac_rate(struct ali_state *state,
-				     unsigned int rate)
-{
-	struct dmabuf *dmabuf = &state->dmabuf;
-	u32 new_rate;
-	struct ac97_codec *codec = state->card->ac97_codec[0];
-
-	if (!(state->card->ac97_features & 0x0001)) {
-		dmabuf->rate = clocking;
-		return clocking;
-	}
-
-	if (rate > 48000)
-		rate = 48000;
-	if (rate < 8000)
-		rate = 8000;
-	dmabuf->rate = rate;
-
-	/*
-	 *      Adjust for misclocked crap
-	 */
-
-	rate = (rate * clocking) / 48000;
-
-	if (strict_clocking && rate < 8000) {
-		rate = 8000;
-		dmabuf->rate = (rate * 48000) / clocking;
-	}
-
-	new_rate = ac97_set_dac_rate(codec, rate);
-	if (new_rate != rate) {
-		dmabuf->rate = (new_rate * 48000) / clocking;
-	}
-	rate = new_rate;
-	return dmabuf->rate;
-}
-
-/* set recording sample rate */
-static unsigned int ali_set_adc_rate(struct ali_state *state,
-				     unsigned int rate)
-{
-	struct dmabuf *dmabuf = &state->dmabuf;
-	u32 new_rate;
-	struct ac97_codec *codec = state->card->ac97_codec[0];
-
-	if (!(state->card->ac97_features & 0x0001)) {
-		dmabuf->rate = clocking;
-		return clocking;
-	}
-
-	if (rate > 48000)
-		rate = 48000;
-	if (rate < 8000)
-		rate = 8000;
-	dmabuf->rate = rate;
-
-	/*
-	 *      Adjust for misclocked crap
-	 */
-
-	rate = (rate * clocking) / 48000;
-	if (strict_clocking && rate < 8000) {
-		rate = 8000;
-		dmabuf->rate = (rate * 48000) / clocking;
-	}
-
-	new_rate = ac97_set_adc_rate(codec, rate);
-
-	if (new_rate != rate) {
-		dmabuf->rate = (new_rate * 48000) / clocking;
-		rate = new_rate;
-	}
-	return dmabuf->rate;
-}
-
-/* set codec independent spdifout sample rate */
-static unsigned int ali_set_codecspdifout_rate(struct ali_state *state,
-					       unsigned int rate)
-{
-	struct dmabuf *dmabuf = &state->dmabuf;
-
-	if (!(state->card->ac97_features & 0x0001)) {
-		dmabuf->rate = clocking;
-		return clocking;
-	}
-
-	if (rate > 48000)
-		rate = 48000;
-	if (rate < 8000)
-		rate = 8000;
-	dmabuf->rate = rate;
-
-	return dmabuf->rate;
-}
-
-/* set  controller independent spdif out function sample rate */
-static void ali_set_spdifout_rate(struct ali_state *state,
-				  unsigned int rate)
-{
-	unsigned char ch_st_sel;
-	unsigned short status_rate;
-
-	switch (rate) {
-	case 44100:
-		status_rate = 0;
-		break;
-	case 32000:
-		status_rate = 0x300;
-		break;
-	case 48000:
-	default:
-		status_rate = 0x200;
-		break;
-	}
-
-	ch_st_sel = inb(state->card->iobase + ALI_SPDIFICS) & ALI_SPDIF_OUT_CH_STATUS;	//select spdif_out
-
-	ch_st_sel |= 0x80;	//select right
-	outb(ch_st_sel, (state->card->iobase + ALI_SPDIFICS));
-	outb(status_rate | 0x20, (state->card->iobase + ALI_SPDIFCSR + 2));
-
-	ch_st_sel &= (~0x80);	//select left
-	outb(ch_st_sel, (state->card->iobase + ALI_SPDIFICS));
-	outw(status_rate | 0x10, (state->card->iobase + ALI_SPDIFCSR + 2));
-}
-
-/* get current playback/recording dma buffer pointer (byte offset from LBA),
-   called with spinlock held! */
-
-static inline unsigned ali_get_dma_addr(struct ali_state *state, int rec)
-{
-	struct dmabuf *dmabuf = &state->dmabuf;
-	unsigned int civ, offset, port, port_picb;
-	unsigned int data;
-
-	if (!dmabuf->enable)
-		return 0;
-
-	if (rec == 1)
-		port = state->card->iobase + dmabuf->read_channel->port;
-	else if (rec == 2)
-		port = state->card->iobase + dmabuf->codec_spdifout_channel->port;
-	else if (rec == 3)
-		port = state->card->iobase + dmabuf->controller_spdifout_channel->port;
-	else
-		port = state->card->iobase + dmabuf->write_channel->port;
-
-	port_picb = port + OFF_PICB;
-
-	do {
-		civ = inb(port + OFF_CIV) & 31;
-		offset = inw(port_picb);
-		/* Must have a delay here! */
-		if (offset == 0)
-			udelay(1);
-
-		/* Reread both registers and make sure that that total
-		 * offset from the first reading to the second is 0.
-		 * There is an issue with SiS hardware where it will count
-		 * picb down to 0, then update civ to the next value,
-		 * then set the new picb to fragsize bytes.  We can catch
-		 * it between the civ update and the picb update, making
-		 * it look as though we are 1 fragsize ahead of where we
-		 * are.  The next to we get the address though, it will
-		 * be back in thdelay is more than long enough
-		 * that we won't have to worry about the chip still being
-		 * out of sync with reality ;-)
-		 */
-	} while (civ != (inb(port + OFF_CIV) & 31) || offset != inw(port_picb));
-
-	data = ((civ + 1) * dmabuf->fragsize - (2 * offset)) % dmabuf->dmasize;
-	if (inw(port_picb) == 0)
-		data -= 2048;
-
-	return data;
-}
-
-/* Stop recording (lock held) */
-static inline void __stop_adc(struct ali_state *state)
-{
-	struct dmabuf *dmabuf = &state->dmabuf;
-	struct ali_card *card = state->card;
-
-	dmabuf->enable &= ~ADC_RUNNING;
-
-	outl((1 << 18) | (1 << 16), card->iobase + ALI_DMACR);
-	udelay(1);
-
-	outb(0, card->iobase + PI_CR);
-	while (inb(card->iobase + PI_CR) != 0);
-
-	// now clear any latent interrupt bits (like the halt bit)
-	outb(inb(card->iobase + PI_SR) | 0x001e, card->iobase + PI_SR);
-	outl(inl(card->iobase + ALI_INTERRUPTSR) & INT_PCMIN, card->iobase + ALI_INTERRUPTSR);
-}
-
-static void stop_adc(struct ali_state *state)
-{
-	struct ali_card *card = state->card;
-	unsigned long flags;
-	spin_lock_irqsave(&card->lock, flags);
-	__stop_adc(state);
-	spin_unlock_irqrestore(&card->lock, flags);
-}
-
-static inline void __start_adc(struct ali_state *state)
-{
-	struct dmabuf *dmabuf = &state->dmabuf;
-
-	if (dmabuf->count < dmabuf->dmasize && dmabuf->ready
-	    && !dmabuf->enable && (dmabuf->trigger & PCM_ENABLE_INPUT)) {
-		dmabuf->enable |= ADC_RUNNING;
-		outb((1 << 4) | (1 << 2), state->card->iobase + PI_CR);
-		if (state->card->channel[0].used == 1)
-			outl(1, state->card->iobase + ALI_DMACR);	// DMA CONTROL REGISTRER
-		udelay(100);
-		if (state->card->channel[2].used == 1)
-			outl((1 << 2), state->card->iobase + ALI_DMACR);	//DMA CONTROL REGISTER
-		udelay(100);
-	}
-}
-
-static void start_adc(struct ali_state *state)
-{
-	struct ali_card *card = state->card;
-	unsigned long flags;
-
-	spin_lock_irqsave(&card->lock, flags);
-	__start_adc(state);
-	spin_unlock_irqrestore(&card->lock, flags);
-}
-
-/* stop playback (lock held) */
-static inline void __stop_dac(struct ali_state *state)
-{
-	struct dmabuf *dmabuf = &state->dmabuf;
-	struct ali_card *card = state->card;
-
-	dmabuf->enable &= ~DAC_RUNNING;
-	outl(0x00020000, card->iobase + 0x08);
-	outb(0, card->iobase + PO_CR);
-	while (inb(card->iobase + PO_CR) != 0)
-		cpu_relax();
-
-	outb(inb(card->iobase + PO_SR) | 0x001e, card->iobase + PO_SR);
-
-	outl(inl(card->iobase + ALI_INTERRUPTSR) & INT_PCMOUT, card->iobase + ALI_INTERRUPTSR);
-}
-
-static void stop_dac(struct ali_state *state)
-{
-	struct ali_card *card = state->card;
-	unsigned long flags;
-	spin_lock_irqsave(&card->lock, flags);
-	__stop_dac(state);
-	spin_unlock_irqrestore(&card->lock, flags);
-}
-
-static inline void __start_dac(struct ali_state *state)
-{
-	struct dmabuf *dmabuf = &state->dmabuf;
-	if (dmabuf->count > 0 && dmabuf->ready && !dmabuf->enable &&
-	    (dmabuf->trigger & PCM_ENABLE_OUTPUT)) {
-		dmabuf->enable |= DAC_RUNNING;
-		outb((1 << 4) | (1 << 2), state->card->iobase + PO_CR);
-		outl((1 << 1), state->card->iobase + 0x08);	//dma control register
-	}
-}
-
-static void start_dac(struct ali_state *state)
-{
-	struct ali_card *card = state->card;
-	unsigned long flags;
-	spin_lock_irqsave(&card->lock, flags);
-	__start_dac(state);
-	spin_unlock_irqrestore(&card->lock, flags);
-}
-
-/* stop codec and controller spdif out  (lock held) */
-static inline void __stop_spdifout(struct ali_state *state)
-{
-	struct dmabuf *dmabuf = &state->dmabuf;
-	struct ali_card *card = state->card;
-
-	if (codec_independent_spdif_locked > 0) {
-		dmabuf->enable &= ~CODEC_SPDIFOUT_RUNNING;
-		outl((1 << 19), card->iobase + 0x08);
-		outb(0, card->iobase + CODECSPDIFOUT_CR);
-
-		while (inb(card->iobase + CODECSPDIFOUT_CR) != 0)
-			cpu_relax();
-
-		outb(inb(card->iobase + CODECSPDIFOUT_SR) | 0x001e, card->iobase + CODECSPDIFOUT_SR);
-		outl(inl(card->iobase + ALI_INTERRUPTSR) & INT_CODECSPDIFOUT, card->iobase + ALI_INTERRUPTSR);
-	} else {
-		if (controller_independent_spdif_locked > 0) {
-			dmabuf->enable &= ~CONTROLLER_SPDIFOUT_RUNNING;
-			outl((1 << 23), card->iobase + 0x08);
-			outb(0, card->iobase + CONTROLLERSPDIFOUT_CR);
-			while (inb(card->iobase + CONTROLLERSPDIFOUT_CR) != 0)
-				cpu_relax();
-			outb(inb(card->iobase + CONTROLLERSPDIFOUT_SR) | 0x001e, card->iobase + CONTROLLERSPDIFOUT_SR);
-			outl(inl(card->iobase + ALI_INTERRUPTSR) & INT_SPDIFOUT, card->iobase + ALI_INTERRUPTSR);
-		}
-	}
-}
-
-static void stop_spdifout(struct ali_state *state)
-{
-	struct ali_card *card = state->card;
-	unsigned long flags;
-	spin_lock_irqsave(&card->lock, flags);
-	__stop_spdifout(state);
-	spin_unlock_irqrestore(&card->lock, flags);
-}
-
-static inline void __start_spdifout(struct ali_state *state)
-{
-	struct dmabuf *dmabuf = &state->dmabuf;
-	if (dmabuf->count > 0 && dmabuf->ready && !dmabuf->enable &&
-	    (dmabuf->trigger & SPDIF_ENABLE_OUTPUT)) {
-		if (codec_independent_spdif_locked > 0) {
-			dmabuf->enable |= CODEC_SPDIFOUT_RUNNING;
-			outb((1 << 4) | (1 << 2), state->card->iobase + CODECSPDIFOUT_CR);
-			outl((1 << 3), state->card->iobase + 0x08);	//dma control register
-		} else {
-			if (controller_independent_spdif_locked > 0) {
-				dmabuf->enable |= CONTROLLER_SPDIFOUT_RUNNING;
-				outb((1 << 4) | (1 << 2), state->card->iobase + CONTROLLERSPDIFOUT_CR);
-				outl((1 << 7), state->card->iobase + 0x08);	//dma control register
-			}
-		}
-	}
-}
-
-static void start_spdifout(struct ali_state *state)
-{
-	struct ali_card *card = state->card;
-	unsigned long flags;
-	spin_lock_irqsave(&card->lock, flags);
-	__start_spdifout(state);
-	spin_unlock_irqrestore(&card->lock, flags);
-}
-
-#define DMABUF_DEFAULTORDER (16-PAGE_SHIFT)
-#define DMABUF_MINORDER 1
-
-/* allocate DMA buffer, playback , recording,spdif out  buffer should be allocated separately */
-static int alloc_dmabuf(struct ali_state *state)
-{
-	struct dmabuf *dmabuf = &state->dmabuf;
-	void *rawbuf = NULL;
-	int order, size;
-	struct page *page, *pend;
-
-	/* If we don't have any oss frag params, then use our default ones */
-	if (dmabuf->ossmaxfrags == 0)
-		dmabuf->ossmaxfrags = 4;
-	if (dmabuf->ossfragsize == 0)
-		dmabuf->ossfragsize = (PAGE_SIZE << DMABUF_DEFAULTORDER) / dmabuf->ossmaxfrags;
-	size = dmabuf->ossfragsize * dmabuf->ossmaxfrags;
-
-	if (dmabuf->rawbuf && (PAGE_SIZE << dmabuf->buforder) == size)
-		return 0;
-	/* alloc enough to satisfy the oss params */
-	for (order = DMABUF_DEFAULTORDER; order >= DMABUF_MINORDER; order--) {
-		if ((PAGE_SIZE << order) > size)
-			continue;
-		if ((rawbuf = pci_alloc_consistent(state->card->pci_dev,
-						   PAGE_SIZE << order,
-						   &dmabuf->dma_handle)))
-			break;
-	}
-	if (!rawbuf)
-		return -ENOMEM;
-
-	dmabuf->ready = dmabuf->mapped = 0;
-	dmabuf->rawbuf = rawbuf;
-	dmabuf->buforder = order;
-
-	/* now mark the pages as reserved; otherwise remap_pfn_range doesn't do what we want */
-	pend = virt_to_page(rawbuf + (PAGE_SIZE << order) - 1);
-	for (page = virt_to_page(rawbuf); page <= pend; page++)
-		SetPageReserved(page);
-	return 0;
-}
-
-/* free DMA buffer */
-static void dealloc_dmabuf(struct ali_state *state)
-{
-	struct dmabuf *dmabuf = &state->dmabuf;
-	struct page *page, *pend;
-
-	if (dmabuf->rawbuf) {
-		/* undo marking the pages as reserved */
-		pend = virt_to_page(dmabuf->rawbuf + (PAGE_SIZE << dmabuf->buforder) - 1);
-		for (page = virt_to_page(dmabuf->rawbuf); page <= pend; page++)
-			ClearPageReserved(page);
-		pci_free_consistent(state->card->pci_dev,
-				    PAGE_SIZE << dmabuf->buforder,
-				    dmabuf->rawbuf, dmabuf->dma_handle);
-	}
-	dmabuf->rawbuf = NULL;
-	dmabuf->mapped = dmabuf->ready = 0;
-}
-
-static int prog_dmabuf(struct ali_state *state, unsigned rec)
-{
-	struct dmabuf *dmabuf = &state->dmabuf;
-	struct ali_channel *c = NULL;
-	struct sg_item *sg;
-	unsigned long flags;
-	int ret;
-	unsigned fragint;
-	int i;
-
-	spin_lock_irqsave(&state->card->lock, flags);
-	if (dmabuf->enable & DAC_RUNNING)
-		__stop_dac(state);
-	if (dmabuf->enable & ADC_RUNNING)
-		__stop_adc(state);
-	if (dmabuf->enable & CODEC_SPDIFOUT_RUNNING)
-		__stop_spdifout(state);
-	if (dmabuf->enable & CONTROLLER_SPDIFOUT_RUNNING)
-		__stop_spdifout(state);
-
-	dmabuf->total_bytes = 0;
-	dmabuf->count = dmabuf->error = 0;
-	dmabuf->swptr = dmabuf->hwptr = 0;
-	spin_unlock_irqrestore(&state->card->lock, flags);
-
-	/* allocate DMA buffer, let alloc_dmabuf determine if we are already
-	 * allocated well enough or if we should replace the current buffer
-	 * (assuming one is already allocated, if it isn't, then allocate it).
-	 */
-	if ((ret = alloc_dmabuf(state)))
-		return ret;
-
-	/* FIXME: figure out all this OSS fragment stuff */
-	/* I did, it now does what it should according to the OSS API.  DL */
-	/* We may not have realloced our dmabuf, but the fragment size to
-	 * fragment number ratio may have changed, so go ahead and reprogram
-	 * things
-	 */
-
-	dmabuf->dmasize = PAGE_SIZE << dmabuf->buforder;
-	dmabuf->numfrag = SG_LEN;
-	dmabuf->fragsize = dmabuf->dmasize / dmabuf->numfrag;
-	dmabuf->fragsamples = dmabuf->fragsize >> 1;
-	dmabuf->userfragsize = dmabuf->ossfragsize;
-	dmabuf->userfrags = dmabuf->dmasize / dmabuf->ossfragsize;
-
-	memset(dmabuf->rawbuf, 0, dmabuf->dmasize);
-
-	if (dmabuf->ossmaxfrags == 4) {
-		fragint = 8;
-		dmabuf->fragshift = 2;
-	} else if (dmabuf->ossmaxfrags == 8) {
-		fragint = 4;
-		dmabuf->fragshift = 3;
-	} else if (dmabuf->ossmaxfrags == 16) {
-		fragint = 2;
-		dmabuf->fragshift = 4;
-	} else {
-		fragint = 1;
-		dmabuf->fragshift = 5;
-	}
-	/*
-	 *      Now set up the ring 
-	 */
-
-	if (rec == 1)
-		c = dmabuf->read_channel;
-	else if (rec == 2)
-		c = dmabuf->codec_spdifout_channel;
-	else if (rec == 3)
-		c = dmabuf->controller_spdifout_channel;
-	else if (rec == 0)
-		c = dmabuf->write_channel;
-	if (c != NULL) {
-		sg = &c->sg[0];
-		/*
-		 *      Load up 32 sg entries and take an interrupt at half
-		 *      way (we might want more interrupts later..) 
-		 */
-		for (i = 0; i < dmabuf->numfrag; i++) {
-			sg->busaddr =
-			    virt_to_bus(dmabuf->rawbuf +
-					dmabuf->fragsize * i);
-			// the card will always be doing 16bit stereo
-			sg->control = dmabuf->fragsamples;
-			sg->control |= CON_BUFPAD;	//I modify
-			// set us up to get IOC interrupts as often as needed to
-			// satisfy numfrag requirements, no more
-			if (((i + 1) % fragint) == 0) {
-				sg->control |= CON_IOC;
-			}
-			sg++;
-		}
-		spin_lock_irqsave(&state->card->lock, flags);
-		outb(2, state->card->iobase + c->port + OFF_CR);	/* reset DMA machine */
-		outl(virt_to_bus(&c->sg[0]), state->card->iobase + c->port + OFF_BDBAR);
-		outb(0, state->card->iobase + c->port + OFF_CIV);
-		outb(0, state->card->iobase + c->port + OFF_LVI);
-		spin_unlock_irqrestore(&state->card->lock, flags);
-	}
-	/* set the ready flag for the dma buffer */
-	dmabuf->ready = 1;
-	return 0;
-}
-
-static void __ali_update_lvi(struct ali_state *state, int rec)
-{
-	struct dmabuf *dmabuf = &state->dmabuf;
-	int x, port;
-	port = state->card->iobase;
-	if (rec == 1)
-		port += dmabuf->read_channel->port;
-	else if (rec == 2)
-		port += dmabuf->codec_spdifout_channel->port;
-	else if (rec == 3)
-		port += dmabuf->controller_spdifout_channel->port;
-	else if (rec == 0)
-		port += dmabuf->write_channel->port;
-	/* if we are currently stopped, then our CIV is actually set to our
-	 * *last* sg segment and we are ready to wrap to the next.  However,
-	 * if we set our LVI to the last sg segment, then it won't wrap to
-	 * the next sg segment, it won't even get a start.  So, instead, when
-	 * we are stopped, we set both the LVI value and also we increment
-	 * the CIV value to the next sg segment to be played so that when
-	 * we call start_{dac,adc}, things will operate properly
-	 */
-	if (!dmabuf->enable && dmabuf->ready) {
-		if (rec && dmabuf->count < dmabuf->dmasize && (dmabuf->trigger & PCM_ENABLE_INPUT)) {
-			outb((inb(port + OFF_CIV) + 1) & 31, port + OFF_LVI);
-			__start_adc(state);
-			while (! (inb(port + OFF_CR) & ((1 << 4) | (1 << 2))))
-				cpu_relax();
-		} else if (!rec && dmabuf->count && (dmabuf->trigger & PCM_ENABLE_OUTPUT)) {
-			outb((inb(port + OFF_CIV) + 1) & 31, port + OFF_LVI);
-			__start_dac(state);
-			while (!(inb(port + OFF_CR) & ((1 << 4) | (1 << 2))))
-				cpu_relax();
-		} else if (rec && dmabuf->count && (dmabuf->trigger & SPDIF_ENABLE_OUTPUT)) {
-			if (codec_independent_spdif_locked > 0) {
-				// outb((inb(port+OFF_CIV))&31, port+OFF_LVI);
-				outb((inb(port + OFF_CIV) + 1) & 31, port + OFF_LVI);
-				__start_spdifout(state);
-				while (!(inb(port + OFF_CR) & ((1 << 4) | (1 << 2))))
-					cpu_relax();
-			} else {
-				if (controller_independent_spdif_locked > 0) {
-					outb((inb(port + OFF_CIV) + 1) & 31, port + OFF_LVI);
-					__start_spdifout(state);
-					while (!(inb(port + OFF_CR) & ((1 << 4) | (1 << 2))))
-						cpu_relax();
-				}
-			}
-		}
-	}
-
-	/* swptr - 1 is the tail of our transfer */
-	x = (dmabuf->dmasize + dmabuf->swptr - 1) % dmabuf->dmasize;
-	x /= dmabuf->fragsize;
-	outb(x, port + OFF_LVI);
-}
-
-static void ali_update_lvi(struct ali_state *state, int rec)
-{
-	struct dmabuf *dmabuf = &state->dmabuf;
-	unsigned long flags;
-	if (!dmabuf->ready)
-		return;
-	spin_lock_irqsave(&state->card->lock, flags);
-	__ali_update_lvi(state, rec);
-	spin_unlock_irqrestore(&state->card->lock, flags);
-}
-
-/* update buffer manangement pointers, especially, dmabuf->count and dmabuf->hwptr */
-static void ali_update_ptr(struct ali_state *state)
-{
-	struct dmabuf *dmabuf = &state->dmabuf;
-	unsigned hwptr;
-	int diff;
-	
-	/* error handling and process wake up for DAC */
-	if (dmabuf->enable == ADC_RUNNING) {
-		/* update hardware pointer */
-		hwptr = ali_get_dma_addr(state, 1);
-		diff = (dmabuf->dmasize + hwptr - dmabuf->hwptr) % dmabuf->dmasize;
-		dmabuf->hwptr = hwptr;
-		dmabuf->total_bytes += diff;
-		dmabuf->count += diff;
-		if (dmabuf->count > dmabuf->dmasize) {
-			/* buffer underrun or buffer overrun */
-			/* this is normal for the end of a read */
-			/* only give an error if we went past the */
-			/* last valid sg entry */
-			if ((inb(state->card->iobase + PI_CIV) & 31) != (inb(state->card->iobase + PI_LVI) & 31)) {
-				printk(KERN_WARNING "ali_audio: DMA overrun on read\n");
-				dmabuf->error++;
-			}
-		}
-		if (dmabuf->count > dmabuf->userfragsize)
-			wake_up(&dmabuf->wait);
-	}
-	/* error handling and process wake up for DAC */
-	if (dmabuf->enable == DAC_RUNNING) {
-		/* update hardware pointer */
-		hwptr = ali_get_dma_addr(state, 0);
-		diff =
-		    (dmabuf->dmasize + hwptr -
-		     dmabuf->hwptr) % dmabuf->dmasize;
-#if defined(DEBUG_INTERRUPTS) || defined(DEBUG_MMAP)
-		printk("DAC HWP %d,%d,%d\n", hwptr, dmabuf->hwptr, diff);
-#endif
-		dmabuf->hwptr = hwptr;
-		dmabuf->total_bytes += diff;
-		dmabuf->count -= diff;
-		if (dmabuf->count < 0) {
-			/* buffer underrun or buffer overrun */
-			/* this is normal for the end of a write */
-			/* only give an error if we went past the */
-			/* last valid sg entry */
-			if ((inb(state->card->iobase + PO_CIV) & 31) != (inb(state->card->iobase + PO_LVI) & 31)) {
-				printk(KERN_WARNING "ali_audio: DMA overrun on write\n");
-				printk(KERN_DEBUG "ali_audio: CIV %d, LVI %d, hwptr %x, count %d\n",
-				     			inb(state->card->iobase + PO_CIV) & 31,
-				     			inb(state->card->iobase + PO_LVI) & 31, 
-							dmabuf->hwptr,
-							dmabuf->count);
-				dmabuf->error++;
-			}
-		}
-		if (dmabuf->count < (dmabuf->dmasize - dmabuf->userfragsize))
-		    	wake_up(&dmabuf->wait);
-	}
-
-	/* error handling and process wake up for CODEC SPDIF OUT */
-	if (dmabuf->enable == CODEC_SPDIFOUT_RUNNING) {
-		/* update hardware pointer */
-		hwptr = ali_get_dma_addr(state, 2);
-		diff = (dmabuf->dmasize + hwptr - dmabuf->hwptr) % dmabuf->dmasize;
-		dmabuf->hwptr = hwptr;
-		dmabuf->total_bytes += diff;
-		dmabuf->count -= diff;
-		if (dmabuf->count < 0) {
-			/* buffer underrun or buffer overrun */
-			/* this is normal for the end of a write */
-			/* only give an error if we went past the */
-			/* last valid sg entry */
-			if ((inb(state->card->iobase + CODECSPDIFOUT_CIV) & 31) != (inb(state->card->iobase + CODECSPDIFOUT_LVI) & 31)) {
-				printk(KERN_WARNING "ali_audio: DMA overrun on write\n");
-				printk(KERN_DEBUG "ali_audio: CIV %d, LVI %d, hwptr %x, count %d\n", 
-				        inb(state->card->iobase + CODECSPDIFOUT_CIV) & 31,
-					inb(state->card->iobase + CODECSPDIFOUT_LVI) & 31,
-					dmabuf->hwptr, dmabuf->count);
-				dmabuf->error++;
-			}
-		}
-		if (dmabuf->count < (dmabuf->dmasize - dmabuf->userfragsize))
-			wake_up(&dmabuf->wait);
-	}
-	/* error handling and process wake up for CONTROLLER SPDIF OUT */
-	if (dmabuf->enable == CONTROLLER_SPDIFOUT_RUNNING) {
-		/* update hardware pointer */
-		hwptr = ali_get_dma_addr(state, 3);
-		diff = (dmabuf->dmasize + hwptr - dmabuf->hwptr) % dmabuf->dmasize;
-		dmabuf->hwptr = hwptr;
-		dmabuf->total_bytes += diff;
-		dmabuf->count -= diff;
-		if (dmabuf->count < 0) {
-			/* buffer underrun or buffer overrun */
-			/* this is normal for the end of a write */
-			/* only give an error if we went past the */
-			/* last valid sg entry */
-			if ((inb(state->card->iobase + CONTROLLERSPDIFOUT_CIV) & 31) != (inb(state->card->iobase + CONTROLLERSPDIFOUT_LVI) & 31)) {
-				printk(KERN_WARNING
-				       "ali_audio: DMA overrun on write\n");
-				printk("ali_audio: CIV %d, LVI %d, hwptr %x, "
-					"count %d\n",
-				     		inb(state->card->iobase + CONTROLLERSPDIFOUT_CIV) & 31,
-				     		inb(state->card->iobase + CONTROLLERSPDIFOUT_LVI) & 31,
-				     		dmabuf->hwptr, dmabuf->count);
-				dmabuf->error++;
-			}
-		}
-		if (dmabuf->count < (dmabuf->dmasize - dmabuf->userfragsize))
-			wake_up(&dmabuf->wait);
-	}
-}
-
-static inline int ali_get_free_write_space(struct
-					   ali_state
-					   *state)
-{
-	struct dmabuf *dmabuf = &state->dmabuf;
-	int free;
-
-	if (dmabuf->count < 0) {
-		dmabuf->count = 0;
-		dmabuf->swptr = dmabuf->hwptr;
-	}
-	free = dmabuf->dmasize - dmabuf->swptr;
-	if ((dmabuf->count + free) > dmabuf->dmasize){
-		free = dmabuf->dmasize - dmabuf->count;
-	}
-	return free;
-}
-
-static inline int ali_get_available_read_data(struct
-					      ali_state
-					      *state)
-{
-	struct dmabuf *dmabuf = &state->dmabuf;
-	int avail;
-	ali_update_ptr(state);
-	// catch overruns during record
-	if (dmabuf->count > dmabuf->dmasize) {
-		dmabuf->count = dmabuf->dmasize;
-		dmabuf->swptr = dmabuf->hwptr;
-	}
-	avail = dmabuf->count;
-	avail -= (dmabuf->hwptr % dmabuf->fragsize);
-	if (avail < 0)
-		return (0);
-	return (avail);
-}
-
-static int drain_dac(struct ali_state *state, int signals_allowed)
-{
-
-	DECLARE_WAITQUEUE(wait, current);
-	struct dmabuf *dmabuf = &state->dmabuf;
-	unsigned long flags;
-	unsigned long tmo;
-	int count;
-	if (!dmabuf->ready)
-		return 0;
-	if (dmabuf->mapped) {
-		stop_dac(state);
-		return 0;
-	}
-	add_wait_queue(&dmabuf->wait, &wait);
-	for (;;) {
-
-		spin_lock_irqsave(&state->card->lock, flags);
-		ali_update_ptr(state);
-		count = dmabuf->count;
-		spin_unlock_irqrestore(&state->card->lock, flags);
-		if (count <= 0)
-			break;
-		/* 
-		 * This will make sure that our LVI is correct, that our
-		 * pointer is updated, and that the DAC is running.  We
-		 * have to force the setting of dmabuf->trigger to avoid
-		 * any possible deadlocks.
-		 */
-		if (!dmabuf->enable) {
-			dmabuf->trigger = PCM_ENABLE_OUTPUT;
-			ali_update_lvi(state, 0);
-		}
-		if (signal_pending(current) && signals_allowed) {
-			break;
-		}
-
-		/* It seems that we have to set the current state to
-		 * TASK_INTERRUPTIBLE every time to make the process
-		 * really go to sleep.  This also has to be *after* the
-		 * update_ptr() call because update_ptr is likely to
-		 * do a wake_up() which will unset this before we ever
-		 * try to sleep, resuling in a tight loop in this code
-		 * instead of actually sleeping and waiting for an
-		 * interrupt to wake us up!
-		 */
-		set_current_state(TASK_INTERRUPTIBLE);
-		/*
-		 * set the timeout to significantly longer than it *should*
-		 * take for the DAC to drain the DMA buffer
-		 */
-		tmo = (count * HZ) / (dmabuf->rate);
-		if (!schedule_timeout(tmo >= 2 ? tmo : 2)) {
-			printk(KERN_ERR "ali_audio: drain_dac, dma timeout?\n");
-			count = 0;
-			break;
-		}
-	}
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&dmabuf->wait, &wait);
-	if (count > 0 && signal_pending(current) && signals_allowed)
-		return -ERESTARTSYS;
-	stop_dac(state);
-	return 0;
-}
-
-
-static int drain_spdifout(struct ali_state *state, int signals_allowed)
-{
-
-	DECLARE_WAITQUEUE(wait, current);
-	struct dmabuf *dmabuf = &state->dmabuf;
-	unsigned long flags;
-	unsigned long tmo;
-	int count;
-	if (!dmabuf->ready)
-		return 0;
-	if (dmabuf->mapped) {
-		stop_spdifout(state);
-		return 0;
-	}
-	add_wait_queue(&dmabuf->wait, &wait);
-	for (;;) {
-
-		spin_lock_irqsave(&state->card->lock, flags);
-		ali_update_ptr(state);
-		count = dmabuf->count;
-		spin_unlock_irqrestore(&state->card->lock, flags);
-		if (count <= 0)
-			break;
-		/* 
-		 * This will make sure that our LVI is correct, that our
-		 * pointer is updated, and that the DAC is running.  We
-		 * have to force the setting of dmabuf->trigger to avoid
-		 * any possible deadlocks.
-		 */
-		if (!dmabuf->enable) {
-			if (codec_independent_spdif_locked > 0) {
-				dmabuf->trigger = SPDIF_ENABLE_OUTPUT;
-				ali_update_lvi(state, 2);
-			} else {
-				if (controller_independent_spdif_locked > 0) {
-					dmabuf->trigger = SPDIF_ENABLE_OUTPUT;
-					ali_update_lvi(state, 3);
-				}
-			}
-		}
-		if (signal_pending(current) && signals_allowed) {
-			break;
-		}
-
-		/* It seems that we have to set the current state to
-		 * TASK_INTERRUPTIBLE every time to make the process
-		 * really go to sleep.  This also has to be *after* the
-		 * update_ptr() call because update_ptr is likely to
-		 * do a wake_up() which will unset this before we ever
-		 * try to sleep, resuling in a tight loop in this code
-		 * instead of actually sleeping and waiting for an
-		 * interrupt to wake us up!
-		 */
-		set_current_state(TASK_INTERRUPTIBLE);
-		/*
-		 * set the timeout to significantly longer than it *should*
-		 * take for the DAC to drain the DMA buffer
-		 */
-		tmo = (count * HZ) / (dmabuf->rate);
-		if (!schedule_timeout(tmo >= 2 ? tmo : 2)) {
-			printk(KERN_ERR "ali_audio: drain_spdifout, dma timeout?\n");
-			count = 0;
-			break;
-		}
-	}
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&dmabuf->wait, &wait);
-	if (count > 0 && signal_pending(current) && signals_allowed)
-		return -ERESTARTSYS;
-	stop_spdifout(state);
-	return 0;
-}
-
-static void ali_channel_interrupt(struct ali_card *card)
-{
-	int i, count;
-	
-	for (i = 0; i < NR_HW_CH; i++) {
-		struct ali_state *state = card->states[i];
-		struct ali_channel *c = NULL;
-		struct dmabuf *dmabuf;
-		unsigned long port = card->iobase;
-		u16 status;
-		if (!state)
-			continue;
-		if (!state->dmabuf.ready)
-			continue;
-		dmabuf = &state->dmabuf;
-		if (codec_independent_spdif_locked > 0) {
-			if (dmabuf->enable & CODEC_SPDIFOUT_RUNNING) {
-				c = dmabuf->codec_spdifout_channel;
-			}
-		} else {
-			if (controller_independent_spdif_locked > 0) {
-				if (dmabuf->enable & CONTROLLER_SPDIFOUT_RUNNING)
-					c = dmabuf->controller_spdifout_channel;
-			} else {
-				if (dmabuf->enable & DAC_RUNNING) {
-					c = dmabuf->write_channel;
-				} else if (dmabuf->enable & ADC_RUNNING) {
-					c = dmabuf->read_channel;
-				} else
-					continue;
-			}
-		}
-		port += c->port;
-
-		status = inw(port + OFF_SR);
-
-		if (status & DMA_INT_COMPLETE) {
-			/* only wake_up() waiters if this interrupt signals
-			 * us being beyond a userfragsize of data open or
-			 * available, and ali_update_ptr() does that for
-			 * us
-			 */
-			ali_update_ptr(state);
-		}
-
-		if (status & DMA_INT_LVI) {
-			ali_update_ptr(state);
-			wake_up(&dmabuf->wait);
-
-			if (dmabuf->enable & DAC_RUNNING)
-				count = dmabuf->count;
-			else if (dmabuf->enable & ADC_RUNNING)
-				count = dmabuf->dmasize - dmabuf->count;
-			else if (dmabuf->enable & CODEC_SPDIFOUT_RUNNING)
-				count = dmabuf->count;
-			else if (dmabuf->enable & CONTROLLER_SPDIFOUT_RUNNING)
-				count = dmabuf->count;
-			else count = 0;
-
-			if (count > 0) {
-				if (dmabuf->enable & DAC_RUNNING)
-					outl((1 << 1), state->card->iobase + ALI_DMACR);
-				else if (dmabuf->enable & CODEC_SPDIFOUT_RUNNING)
-						outl((1 << 3), state->card->iobase + ALI_DMACR);
-				else if (dmabuf->enable & CONTROLLER_SPDIFOUT_RUNNING)
-					outl((1 << 7), state->card->iobase + ALI_DMACR);
-			} else {
-				if (dmabuf->enable & DAC_RUNNING)
-					__stop_dac(state);
-				if (dmabuf->enable & ADC_RUNNING)
-					__stop_adc(state);
-				if (dmabuf->enable & CODEC_SPDIFOUT_RUNNING)
-					__stop_spdifout(state);
-				if (dmabuf->enable & CONTROLLER_SPDIFOUT_RUNNING)
-					__stop_spdifout(state);
-				dmabuf->enable = 0;
-				wake_up(&dmabuf->wait);
-			}
-
-		}
-		if (!(status & DMA_INT_DCH)) {
-			ali_update_ptr(state);
-			wake_up(&dmabuf->wait);
-			if (dmabuf->enable & DAC_RUNNING)
-				count = dmabuf->count;
-			else if (dmabuf->enable & ADC_RUNNING)
-				count = dmabuf->dmasize - dmabuf->count;
-			else if (dmabuf->enable & CODEC_SPDIFOUT_RUNNING)
-				count = dmabuf->count;
-			else if (dmabuf->enable & CONTROLLER_SPDIFOUT_RUNNING)
-				count = dmabuf->count;
-			else
-				count = 0;
-
-			if (count > 0) {
-				if (dmabuf->enable & DAC_RUNNING)
-					outl((1 << 1), state->card->iobase + ALI_DMACR);
-				else if (dmabuf->enable & CODEC_SPDIFOUT_RUNNING)
-					outl((1 << 3), state->card->iobase + ALI_DMACR);
-				else if (dmabuf->enable & CONTROLLER_SPDIFOUT_RUNNING)
-					outl((1 << 7), state->card->iobase + ALI_DMACR);
-			} else {
-				if (dmabuf->enable & DAC_RUNNING)
-					__stop_dac(state);
-				if (dmabuf->enable & ADC_RUNNING)
-					__stop_adc(state);
-				if (dmabuf->enable & CODEC_SPDIFOUT_RUNNING)
-					__stop_spdifout(state);
-				if (dmabuf->enable & CONTROLLER_SPDIFOUT_RUNNING)
-					__stop_spdifout(state);
-				dmabuf->enable = 0;
-				wake_up(&dmabuf->wait);
-			}
-		}
-		outw(status & DMA_INT_MASK, port + OFF_SR);
-	}
-}
-
-static irqreturn_t ali_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
-	struct ali_card *card = (struct ali_card *) dev_id;
-	u32 status;
-	u16 status2;
-
-	spin_lock(&card->lock);
-	status = inl(card->iobase + ALI_INTERRUPTSR);
-	if (!(status & INT_MASK)) {
-		spin_unlock(&card->lock);
-		return IRQ_NONE;		/* not for us */
-	}
-
-	if (codec_independent_spdif_locked > 0) {
-		if (globel == 0) {
-			globel += 1;
-			status2 = inw(card->iobase + 0x76);
-			outw(status2 | 0x000c, card->iobase + 0x76);
-		} else {
-			if (status & (INT_PCMOUT | INT_PCMIN | INT_MICIN | INT_SPDIFOUT | INT_CODECSPDIFOUT))
-				ali_channel_interrupt(card);
-		}
-	} else {
-		if (status & (INT_PCMOUT | INT_PCMIN | INT_MICIN | INT_SPDIFOUT | INT_CODECSPDIFOUT))
-			ali_channel_interrupt(card);
-	}
-
-	/* clear 'em */
-	outl(status & INT_MASK, card->iobase + ALI_INTERRUPTSR);
-	spin_unlock(&card->lock);
-	return IRQ_HANDLED;
-}
-
-/* in this loop, dmabuf.count signifies the amount of data that is
-   waiting to be copied to the user's buffer.  It is filled by the dma
-   machine and drained by this loop. */
-
-static ssize_t ali_read(struct file *file, char __user *buffer,
-			size_t count, loff_t * ppos)
-{
-	struct ali_state *state = (struct ali_state *) file->private_data;
-	struct ali_card *card = state ? state->card : NULL;
-	struct dmabuf *dmabuf = &state->dmabuf;
-	ssize_t ret;
-	unsigned long flags;
-	unsigned int swptr;
-	int cnt;
-	DECLARE_WAITQUEUE(waita, current);
-#ifdef DEBUG2
-	printk("ali_audio: ali_read called, count = %d\n", count);
-#endif
-	if (dmabuf->mapped)
-		return -ENXIO;
-	if (dmabuf->enable & DAC_RUNNING)
-		return -ENODEV;
-	if (!dmabuf->read_channel) {
-		dmabuf->ready = 0;
-		dmabuf->read_channel = card->alloc_rec_pcm_channel(card);
-		if (!dmabuf->read_channel) {
-			return -EBUSY;
-		}
-	}
-	if (!dmabuf->ready && (ret = prog_dmabuf(state, 1)))
-		return ret;
-	if (!access_ok(VERIFY_WRITE, buffer, count))
-		return -EFAULT;
-	ret = 0;
-	add_wait_queue(&dmabuf->wait, &waita);
-	while (count > 0) {
-		set_current_state(TASK_INTERRUPTIBLE);
-		spin_lock_irqsave(&card->lock, flags);
-		if (PM_SUSPENDED(card)) {
-			spin_unlock_irqrestore(&card->lock, flags);
-			schedule();
-			if (signal_pending(current)) {
-				if (!ret)
-					ret = -EAGAIN;
-				break;
-			}
-			continue;
-		}
-		swptr = dmabuf->swptr;
-		cnt = ali_get_available_read_data(state);
-		// this is to make the copy_to_user simpler below
-		if (cnt > (dmabuf->dmasize - swptr))
-			cnt = dmabuf->dmasize - swptr;
-		spin_unlock_irqrestore(&card->lock, flags);
-		if (cnt > count)
-			cnt = count;
-		/* Lop off the last two bits to force the code to always
-		 * write in full samples.  This keeps software that sets
-		 * O_NONBLOCK but doesn't check the return value of the
-		 * write call from getting things out of state where they
-		 * think a full 4 byte sample was written when really only
-		 * a portion was, resulting in odd sound and stereo
-		 * hysteresis.
-		 */
-		cnt &= ~0x3;
-		if (cnt <= 0) {
-			unsigned long tmo;
-			/*
-			 * Don't let us deadlock.  The ADC won't start if
-			 * dmabuf->trigger isn't set.  A call to SETTRIGGER
-			 * could have turned it off after we set it to on
-			 * previously.
-			 */
-			dmabuf->trigger = PCM_ENABLE_INPUT;
-			/*
-			 * This does three things.  Updates LVI to be correct,
-			 * makes sure the ADC is running, and updates the
-			 * hwptr.
-			 */
-			ali_update_lvi(state, 1);
-			if (file->f_flags & O_NONBLOCK) {
-				if (!ret)
-					ret = -EAGAIN;
-				goto done;
-			}
-			/* Set the timeout to how long it would take to fill
-			 * two of our buffers.  If we haven't been woke up
-			 * by then, then we know something is wrong.
-			 */
-			tmo = (dmabuf->dmasize * HZ * 2) / (dmabuf->rate * 4);
-			    
-			/* There are two situations when sleep_on_timeout returns, one is when
-			   the interrupt is serviced correctly and the process is waked up by
-			   ISR ON TIME. Another is when timeout is expired, which means that
-			   either interrupt is NOT serviced correctly (pending interrupt) or it
-			   is TOO LATE for the process to be scheduled to run (scheduler latency)
-			   which results in a (potential) buffer overrun. And worse, there is
-			   NOTHING we can do to prevent it. */
-			if (!schedule_timeout(tmo >= 2 ? tmo : 2)) {
-				printk(KERN_ERR
-				       "ali_audio: recording schedule timeout, "
-				       "dmasz %u fragsz %u count %i hwptr %u swptr %u\n",
-				       dmabuf->dmasize, dmabuf->fragsize,
-				       dmabuf->count, dmabuf->hwptr,
-				       dmabuf->swptr);
-				/* a buffer overrun, we delay the recovery until next time the
-				   while loop begin and we REALLY have space to record */
-			}
-			if (signal_pending(current)) {
-				ret = ret ? ret : -ERESTARTSYS;
-				goto done;
-			}
-			continue;
-		}
-
-		if (copy_to_user(buffer, dmabuf->rawbuf + swptr, cnt)) {
-			if (!ret)
-				ret = -EFAULT;
-			goto done;
-		}
-
-		swptr = (swptr + cnt) % dmabuf->dmasize;
-		spin_lock_irqsave(&card->lock, flags);
-		if (PM_SUSPENDED(card)) {
-			spin_unlock_irqrestore(&card->lock, flags);
-			continue;
-		}
-		dmabuf->swptr = swptr;
-		dmabuf->count -= cnt;
-		spin_unlock_irqrestore(&card->lock, flags);
-		count -= cnt;
-		buffer += cnt;
-		ret += cnt;
-	}
-done:
-	ali_update_lvi(state, 1);
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&dmabuf->wait, &waita);
-	return ret;
-}
-
-/* in this loop, dmabuf.count signifies the amount of data that is waiting to be dma to
-   the soundcard.  it is drained by the dma machine and filled by this loop. */
-static ssize_t ali_write(struct file *file,
-			 const char __user *buffer, size_t count, loff_t * ppos)
-{
-	struct ali_state *state = (struct ali_state *) file->private_data;
-	struct ali_card *card = state ? state->card : NULL;
-	struct dmabuf *dmabuf = &state->dmabuf;
-	ssize_t ret;
-	unsigned long flags;
-	unsigned int swptr = 0;
-	int cnt, x;
-	DECLARE_WAITQUEUE(waita, current);
-#ifdef DEBUG2
-	printk("ali_audio: ali_write called, count = %d\n", count);
-#endif
-	if (dmabuf->mapped)
-		return -ENXIO;
-	if (dmabuf->enable & ADC_RUNNING)
-		return -ENODEV;
-	if (codec_independent_spdif_locked > 0) {
-		if (!dmabuf->codec_spdifout_channel) {
-			dmabuf->ready = 0;
-			dmabuf->codec_spdifout_channel = card->alloc_codec_spdifout_channel(card);
-			if (!dmabuf->codec_spdifout_channel)
-				return -EBUSY;
-		}
-	} else {
-		if (controller_independent_spdif_locked > 0) {
-			if (!dmabuf->controller_spdifout_channel) {
-				dmabuf->ready = 0;
-				dmabuf->controller_spdifout_channel = card->alloc_controller_spdifout_channel(card);
-				if (!dmabuf->controller_spdifout_channel)
-					return -EBUSY;
-			}
-		} else {
-			if (!dmabuf->write_channel) {
-				dmabuf->ready = 0;
-				dmabuf->write_channel =
-				    card->alloc_pcm_channel(card);
-				if (!dmabuf->write_channel)
-					return -EBUSY;
-			}
-		}
-	}
-
-	if (codec_independent_spdif_locked > 0) {
-		if (!dmabuf->ready && (ret = prog_dmabuf(state, 2)))
-			return ret;
-	} else {
-		if (controller_independent_spdif_locked > 0) {
-			if (!dmabuf->ready && (ret = prog_dmabuf(state, 3)))
-				return ret;
-		} else {
-
-			if (!dmabuf->ready && (ret = prog_dmabuf(state, 0)))
-				return ret;
-		}
-	}
-	if (!access_ok(VERIFY_READ, buffer, count))
-		return -EFAULT;
-	ret = 0;
-	add_wait_queue(&dmabuf->wait, &waita);
-	while (count > 0) {
-		set_current_state(TASK_INTERRUPTIBLE);
-		spin_lock_irqsave(&state->card->lock, flags);
-		if (PM_SUSPENDED(card)) {
-			spin_unlock_irqrestore(&card->lock, flags);
-			schedule();
-			if (signal_pending(current)) {
-				if (!ret)
-					ret = -EAGAIN;
-				break;
-			}
-			continue;
-		}
-
-		swptr = dmabuf->swptr;
-		cnt = ali_get_free_write_space(state);
-		/* Bound the maximum size to how much we can copy to the
-		 * dma buffer before we hit the end.  If we have more to
-		 * copy then it will get done in a second pass of this
-		 * loop starting from the beginning of the buffer.
-		 */
-		if (cnt > (dmabuf->dmasize - swptr))
-			cnt = dmabuf->dmasize - swptr;
-		spin_unlock_irqrestore(&state->card->lock, flags);
-#ifdef DEBUG2
-		printk(KERN_INFO
-		       "ali_audio: ali_write: %d bytes available space\n",
-		       cnt);
-#endif
-		if (cnt > count)
-			cnt = count;
-		/* Lop off the last two bits to force the code to always
-		 * write in full samples.  This keeps software that sets
-		 * O_NONBLOCK but doesn't check the return value of the
-		 * write call from getting things out of state where they
-		 * think a full 4 byte sample was written when really only
-		 * a portion was, resulting in odd sound and stereo
-		 * hysteresis.
-		 */
-		cnt &= ~0x3;
-		if (cnt <= 0) {
-			unsigned long tmo;
-			// There is data waiting to be played
-			/*
-			 * Force the trigger setting since we would
-			 * deadlock with it set any other way
-			 */
-			if (codec_independent_spdif_locked > 0) {
-				dmabuf->trigger = SPDIF_ENABLE_OUTPUT;
-				ali_update_lvi(state, 2);
-			} else {
-				if (controller_independent_spdif_locked > 0) {
-					dmabuf->trigger = SPDIF_ENABLE_OUTPUT;
-					ali_update_lvi(state, 3);
-				} else {
-
-					dmabuf->trigger = PCM_ENABLE_OUTPUT;
-					ali_update_lvi(state, 0);
-				}
-			}
-			if (file->f_flags & O_NONBLOCK) {
-				if (!ret)
-					ret = -EAGAIN;
-				goto ret;
-			}
-			/* Not strictly correct but works */
-			tmo = (dmabuf->dmasize * HZ * 2) / (dmabuf->rate * 4);
-			/* There are two situations when sleep_on_timeout returns, one is when
-			   the interrupt is serviced correctly and the process is waked up by
-			   ISR ON TIME. Another is when timeout is expired, which means that
-			   either interrupt is NOT serviced correctly (pending interrupt) or it
-			   is TOO LATE for the process to be scheduled to run (scheduler latency)
-			   which results in a (potential) buffer underrun. And worse, there is
-			   NOTHING we can do to prevent it. */
-			   
-			/* FIXME - do timeout handling here !! */
-			schedule_timeout(tmo >= 2 ? tmo : 2);
-
-			if (signal_pending(current)) {
-				if (!ret)
-					ret = -ERESTARTSYS;
-				goto ret;
-			}
-			continue;
-		}
-		if (copy_from_user(dmabuf->rawbuf + swptr, buffer, cnt)) {
-			if (!ret)
-				ret = -EFAULT;
-			goto ret;
-		}
-
-		swptr = (swptr + cnt) % dmabuf->dmasize;
-		spin_lock_irqsave(&state->card->lock, flags);
-		if (PM_SUSPENDED(card)) {
-			spin_unlock_irqrestore(&card->lock, flags);
-			continue;
-		}
-
-		dmabuf->swptr = swptr;
-		dmabuf->count += cnt;
-		count -= cnt;
-		buffer += cnt;
-		ret += cnt;
-		spin_unlock_irqrestore(&state->card->lock, flags);
-	}
-	if (swptr % dmabuf->fragsize) {
-		x = dmabuf->fragsize - (swptr % dmabuf->fragsize);
-		memset(dmabuf->rawbuf + swptr, '\0', x);
-	}
-ret:
-	if (codec_independent_spdif_locked > 0) {
-		ali_update_lvi(state, 2);
-	} else {
-		if (controller_independent_spdif_locked > 0) {
-			ali_update_lvi(state, 3);
-		} else {
-			ali_update_lvi(state, 0);
-		}
-	}
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&dmabuf->wait, &waita);
-	return ret;
-}
-
-/* No kernel lock - we have our own spinlock */
-static unsigned int ali_poll(struct file *file, struct poll_table_struct
-			     *wait)
-{
-	struct ali_state *state = (struct ali_state *) file->private_data;
-	struct dmabuf *dmabuf = &state->dmabuf;
-	unsigned long flags;
-	unsigned int mask = 0;
-	if (!dmabuf->ready)
-		return 0;
-	poll_wait(file, &dmabuf->wait, wait);
-	spin_lock_irqsave(&state->card->lock, flags);
-	ali_update_ptr(state);
-	if (file->f_mode & FMODE_READ && dmabuf->enable & ADC_RUNNING) {
-		if (dmabuf->count >= (signed) dmabuf->fragsize)
-			mask |= POLLIN | POLLRDNORM;
-	}
-	if (file->f_mode & FMODE_WRITE  && (dmabuf->enable & (DAC_RUNNING|CODEC_SPDIFOUT_RUNNING|CONTROLLER_SPDIFOUT_RUNNING))) {
-		if ((signed) dmabuf->dmasize >= dmabuf->count + (signed) dmabuf->fragsize)
-			mask |= POLLOUT | POLLWRNORM;
-	}
-	spin_unlock_irqrestore(&state->card->lock, flags);
-	return mask;
-}
-
-static int ali_mmap(struct file *file, struct vm_area_struct *vma)
-{
-	struct ali_state *state = (struct ali_state *) file->private_data;
-	struct dmabuf *dmabuf = &state->dmabuf;
-	int ret = -EINVAL;
-	unsigned long size;
-	lock_kernel();
-	if (vma->vm_flags & VM_WRITE) {
-		if (!dmabuf->write_channel && (dmabuf->write_channel = state->card->alloc_pcm_channel(state->card)) == NULL) {
-			ret = -EBUSY;
-			goto out;
-		}
-	}
-	if (vma->vm_flags & VM_READ) {
-		if (!dmabuf->read_channel && (dmabuf->read_channel = state->card->alloc_rec_pcm_channel(state->card)) == NULL) {
-			ret = -EBUSY;
-			goto out;
-		}
-	}
-	if ((ret = prog_dmabuf(state, 0)) != 0)
-		goto out;
-	ret = -EINVAL;
-	if (vma->vm_pgoff != 0)
-		goto out;
-	size = vma->vm_end - vma->vm_start;
-	if (size > (PAGE_SIZE << dmabuf->buforder))
-		goto out;
-	ret = -EAGAIN;
-	if (remap_pfn_range(vma, vma->vm_start,
-				virt_to_phys(dmabuf->rawbuf) >> PAGE_SHIFT,
-				size, vma->vm_page_prot))
-		goto out;
-	dmabuf->mapped = 1;
-	dmabuf->trigger = 0;
-	ret = 0;
-out:
-	unlock_kernel();
-	return ret;
-}
-
-static int ali_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
-{
-	struct ali_state *state = (struct ali_state *) file->private_data;
-	struct ali_channel *c = NULL;
-	struct dmabuf *dmabuf = &state->dmabuf;
-	unsigned long flags;
-	audio_buf_info abinfo;
-	count_info cinfo;
-	unsigned int i_scr;
-	int val = 0, ret;
-	struct ac97_codec *codec = state->card->ac97_codec[0];
-	void __user *argp = (void __user *)arg;
-	int __user *p = argp;
-
-#ifdef DEBUG
-	printk("ali_audio: ali_ioctl, arg=0x%x, cmd=",
-	       arg ? *p : 0);
-#endif
-	switch (cmd) {
-	case OSS_GETVERSION:
-#ifdef DEBUG
-		printk("OSS_GETVERSION\n");
-#endif
-		return put_user(SOUND_VERSION, p);
-	case SNDCTL_DSP_RESET:
-#ifdef DEBUG
-		printk("SNDCTL_DSP_RESET\n");
-#endif
-		spin_lock_irqsave(&state->card->lock, flags);
-		if (dmabuf->enable == DAC_RUNNING) {
-			c = dmabuf->write_channel;
-			__stop_dac(state);
-		}
-		if (dmabuf->enable == ADC_RUNNING) {
-			c = dmabuf->read_channel;
-			__stop_adc(state);
-		}
-		if (dmabuf->enable == CODEC_SPDIFOUT_RUNNING) {
-			c = dmabuf->codec_spdifout_channel;
-			__stop_spdifout(state);
-		}
-		if (dmabuf->enable == CONTROLLER_SPDIFOUT_RUNNING) {
-			c = dmabuf->controller_spdifout_channel;
-			__stop_spdifout(state);
-		}
-		if (c != NULL) {
-			outb(2, state->card->iobase + c->port + OFF_CR);	/* reset DMA machine */
-			outl(virt_to_bus(&c->sg[0]),
-			     state->card->iobase + c->port + OFF_BDBAR);
-			outb(0, state->card->iobase + c->port + OFF_CIV);
-			outb(0, state->card->iobase + c->port + OFF_LVI);
-		}
-
-		spin_unlock_irqrestore(&state->card->lock, flags);
-		synchronize_irq(state->card->pci_dev->irq);
-		dmabuf->ready = 0;
-		dmabuf->swptr = dmabuf->hwptr = 0;
-		dmabuf->count = dmabuf->total_bytes = 0;
-		return 0;
-	case SNDCTL_DSP_SYNC:
-#ifdef DEBUG
-		printk("SNDCTL_DSP_SYNC\n");
-#endif
-		if (codec_independent_spdif_locked > 0) {
-			if (dmabuf->enable != CODEC_SPDIFOUT_RUNNING
-			    || file->f_flags & O_NONBLOCK)
-				return 0;
-			if ((val = drain_spdifout(state, 1)))
-				return val;
-		} else {
-			if (controller_independent_spdif_locked > 0) {
-				if (dmabuf->enable !=
-				    CONTROLLER_SPDIFOUT_RUNNING
-				    || file->f_flags & O_NONBLOCK)
-					return 0;
-				if ((val = drain_spdifout(state, 1)))
-					return val;
-			} else {
-				if (dmabuf->enable != DAC_RUNNING
-				    || file->f_flags & O_NONBLOCK)
-					return 0;
-				if ((val = drain_dac(state, 1)))
-					return val;
-			}
-		}
-		dmabuf->total_bytes = 0;
-		return 0;
-	case SNDCTL_DSP_SPEED:	/* set smaple rate */
-#ifdef DEBUG
-		printk("SNDCTL_DSP_SPEED\n");
-#endif
-		if (get_user(val, p))
-			return -EFAULT;
-		if (val >= 0) {
-			if (file->f_mode & FMODE_WRITE) {
-				if ((state->card->ac97_status & SPDIF_ON)) {	/* S/PDIF Enabled */
-					/* RELTEK ALC650 only support 48000, need to check that */
-					if (ali_valid_spdif_rate(codec, val)) {
-						if (codec_independent_spdif_locked > 0) {
-							ali_set_spdif_output(state, -1, 0);
-							stop_spdifout(state);
-							dmabuf->ready = 0;
-							/* I add test codec independent spdif out */
-							spin_lock_irqsave(&state->card->lock, flags);
-							ali_set_codecspdifout_rate(state, val);	// I modified
-							spin_unlock_irqrestore(&state->card->lock, flags);
-							/* Set S/PDIF transmitter rate. */
-							i_scr = inl(state->card->iobase + ALI_SCR);
-							if ((i_scr & 0x00300000) == 0x00100000) {
-								ali_set_spdif_output(state, AC97_EA_SPSA_7_8, codec_independent_spdif_locked);
-							} else {
-								if ((i_scr&0x00300000)  == 0x00200000)
-								{
-									ali_set_spdif_output(state, AC97_EA_SPSA_6_9, codec_independent_spdif_locked);
-								} else {
-									if ((i_scr & 0x00300000) == 0x00300000) {
-										ali_set_spdif_output(state, AC97_EA_SPSA_10_11, codec_independent_spdif_locked);
-									} else {
-										ali_set_spdif_output(state, AC97_EA_SPSA_7_8, codec_independent_spdif_locked);
-									}
-								}
-							}
-
-							if (!(state->card->ac97_status & SPDIF_ON)) {
-								val = dmabuf->rate;
-							}
-						} else {
-							if (controller_independent_spdif_locked > 0) 
-							{
-								stop_spdifout(state);
-								dmabuf->ready = 0;
-								spin_lock_irqsave(&state->card->lock, flags);
-								ali_set_spdifout_rate(state, controller_independent_spdif_locked);
-								spin_unlock_irqrestore(&state->card->lock, flags);
-							} else {
-								/* Set DAC rate */
-								ali_set_spdif_output(state, -1, 0);
-								stop_dac(state);
-								dmabuf->ready = 0;
-								spin_lock_irqsave(&state->card->lock, flags);
-								ali_set_dac_rate(state, val);
-								spin_unlock_irqrestore(&state->card->lock, flags);
-								/* Set S/PDIF transmitter rate. */
-								ali_set_spdif_output(state, AC97_EA_SPSA_3_4, val);
-								if (!(state->card->ac97_status & SPDIF_ON))
-								{
-									val = dmabuf->rate;
-								}
-							}
-						}
-					} else {	/* Not a valid rate for S/PDIF, ignore it */
-						val = dmabuf->rate;
-					}
-				} else {
-					stop_dac(state);
-					dmabuf->ready = 0;
-					spin_lock_irqsave(&state->card->lock, flags);
-					ali_set_dac_rate(state, val);
-					spin_unlock_irqrestore(&state->card->lock, flags);
-				}
-			}
-			if (file->f_mode & FMODE_READ) {
-				stop_adc(state);
-				dmabuf->ready = 0;
-				spin_lock_irqsave(&state->card->lock, flags);
-				ali_set_adc_rate(state, val);
-				spin_unlock_irqrestore(&state->card->lock, flags);
-			}
-		}
-		return put_user(dmabuf->rate, p);
-	case SNDCTL_DSP_STEREO:	/* set stereo or mono channel */
-#ifdef DEBUG
-		printk("SNDCTL_DSP_STEREO\n");
-#endif
-		if (dmabuf->enable & DAC_RUNNING) {
-			stop_dac(state);
-		}
-		if (dmabuf->enable & ADC_RUNNING) {
-			stop_adc(state);
-		}
-		if (dmabuf->enable & CODEC_SPDIFOUT_RUNNING) {
-			stop_spdifout(state);
-		}
-		if (dmabuf->enable & CONTROLLER_SPDIFOUT_RUNNING) {
-			stop_spdifout(state);
-		}
-		return put_user(1, p);
-	case SNDCTL_DSP_GETBLKSIZE:
-		if (file->f_mode & FMODE_WRITE) {
-			if (codec_independent_spdif_locked > 0) {
-				if (!dmabuf->ready && (val = prog_dmabuf(state, 2)))
-					return val;
-			} else {
-				if (controller_independent_spdif_locked > 0) {
-					if (!dmabuf->ready && (val = prog_dmabuf(state, 3)))
-						return val;
-				} else {
-					if (!dmabuf->ready && (val = prog_dmabuf(state, 0)))
-						return val;
-				}
-			}
-		}
-
-		if (file->f_mode & FMODE_READ) {
-			if (!dmabuf->ready && (val = prog_dmabuf(state, 1)))
-				return val;
-		}
-#ifdef DEBUG
-		printk("SNDCTL_DSP_GETBLKSIZE %d\n", dmabuf->userfragsize);
-#endif
-		return put_user(dmabuf->userfragsize, p);
-	case SNDCTL_DSP_GETFMTS:	/* Returns a mask of supported sample format */
-#ifdef DEBUG
-		printk("SNDCTL_DSP_GETFMTS\n");
-#endif
-		return put_user(AFMT_S16_LE, p);
-	case SNDCTL_DSP_SETFMT:	/* Select sample format */
-#ifdef DEBUG
-		printk("SNDCTL_DSP_SETFMT\n");
-#endif
-		return put_user(AFMT_S16_LE, p);
-	case SNDCTL_DSP_CHANNELS:	// add support 4,6 channel 
-#ifdef DEBUG
-		printk("SNDCTL_DSP_CHANNELS\n");
-#endif
-		if (get_user(val, p))
-			return -EFAULT;
-		if (val > 0) {
-			if (dmabuf->enable & DAC_RUNNING) {
-				stop_dac(state);
-			}
-			if (dmabuf->enable & CODEC_SPDIFOUT_RUNNING) {
-				stop_spdifout(state);
-			}
-			if (dmabuf->enable & CONTROLLER_SPDIFOUT_RUNNING) {
-				stop_spdifout(state);
-			}
-			if (dmabuf->enable & ADC_RUNNING) {
-				stop_adc(state);
-			}
-		} else {
-			return put_user(state->card->channels, p);
-		}
-
-		i_scr = inl(state->card->iobase + ALI_SCR);
-		/* Current # of channels enabled */
-		if (i_scr & 0x00000100)
-			ret = 4;
-		else if (i_scr & 0x00000200)
-			ret = 6;
-		else
-			ret = 2;
-		switch (val) {
-		case 2:	/* 2 channels is always supported */
-			if (codec_independent_spdif_locked > 0) {
-				outl(((i_scr & 0xfffffcff) | 0x00100000), (state->card->iobase + ALI_SCR));
-			} else
-				outl((i_scr & 0xfffffcff), (state->card->iobase + ALI_SCR));
-			/* Do we need to change mixer settings????  */
-			break;
-		case 4:	/* Supported on some chipsets, better check first */
-			if (codec_independent_spdif_locked > 0) {
-				outl(((i_scr & 0xfffffcff) | 0x00000100 | 0x00200000), (state->card->iobase + ALI_SCR));
-			} else
-				outl(((i_scr & 0xfffffcff) | 0x00000100), (state->card->iobase + ALI_SCR));
-			break;
-		case 6:	/* Supported on some chipsets, better check first */
-			if (codec_independent_spdif_locked > 0) {
-				outl(((i_scr & 0xfffffcff) | 0x00000200 | 0x00008000 | 0x00300000), (state->card->iobase + ALI_SCR));
-			} else
-				outl(((i_scr & 0xfffffcff) | 0x00000200 | 0x00008000), (state->card->iobase + ALI_SCR));
-			break;
-		default:	/* nothing else is ever supported by the chipset */
-			val = ret;
-			break;
-		}
-		return put_user(val, p);
-	case SNDCTL_DSP_POST:	/* the user has sent all data and is notifying us */
-		/* we update the swptr to the end of the last sg segment then return */
-#ifdef DEBUG
-		printk("SNDCTL_DSP_POST\n");
-#endif
-		if (codec_independent_spdif_locked > 0) {
-			if (!dmabuf->ready || (dmabuf->enable != CODEC_SPDIFOUT_RUNNING))
-				return 0;
-		} else {
-			if (controller_independent_spdif_locked > 0) {
-				if (!dmabuf->ready || (dmabuf->enable != CONTROLLER_SPDIFOUT_RUNNING))
-					return 0;
-			} else {
-				if (!dmabuf->ready || (dmabuf->enable != DAC_RUNNING))
-					return 0;
-			}
-		}
-		if ((dmabuf->swptr % dmabuf->fragsize) != 0) {
-			val = dmabuf->fragsize - (dmabuf->swptr % dmabuf->fragsize);
-			dmabuf->swptr += val;
-			dmabuf->count += val;
-		}
-		return 0;
-	case SNDCTL_DSP_SUBDIVIDE:
-		if (dmabuf->subdivision)
-			return -EINVAL;
-		if (get_user(val, p))
-			return -EFAULT;
-		if (val != 1 && val != 2 && val != 4)
-			return -EINVAL;
-#ifdef DEBUG
-		printk("SNDCTL_DSP_SUBDIVIDE %d\n", val);
-#endif
-		dmabuf->subdivision = val;
-		dmabuf->ready = 0;
-		return 0;
-	case SNDCTL_DSP_SETFRAGMENT:
-		if (get_user(val, p))
-			return -EFAULT;
-		dmabuf->ossfragsize = 1 << (val & 0xffff);
-		dmabuf->ossmaxfrags = (val >> 16) & 0xffff;
-		if (!dmabuf->ossfragsize || !dmabuf->ossmaxfrags)
-			return -EINVAL;
-		/*
-		 * Bound the frag size into our allowed range of 256 - 4096
-		 */
-		if (dmabuf->ossfragsize < 256)
-			dmabuf->ossfragsize = 256;
-		else if (dmabuf->ossfragsize > 4096)
-			dmabuf->ossfragsize = 4096;
-		/*
-		 * The numfrags could be something reasonable, or it could
-		 * be 0xffff meaning "Give me as much as possible".  So,
-		 * we check the numfrags * fragsize doesn't exceed our
-		 * 64k buffer limit, nor is it less than our 8k minimum.
-		 * If it fails either one of these checks, then adjust the
-		 * number of fragments, not the size of them.  It's OK if
-		 * our number of fragments doesn't equal 32 or anything
-		 * like our hardware based number now since we are using
-		 * a different frag count for the hardware.  Before we get
-		 * into this though, bound the maxfrags to avoid overflow
-		 * issues.  A reasonable bound would be 64k / 256 since our
-		 * maximum buffer size is 64k and our minimum frag size is
-		 * 256.  On the other end, our minimum buffer size is 8k and
-		 * our maximum frag size is 4k, so the lower bound should
-		 * be 2.
-		 */
-		if (dmabuf->ossmaxfrags > 256)
-			dmabuf->ossmaxfrags = 256;
-		else if (dmabuf->ossmaxfrags < 2)
-			dmabuf->ossmaxfrags = 2;
-		val = dmabuf->ossfragsize * dmabuf->ossmaxfrags;
-		while (val < 8192) {
-			val <<= 1;
-			dmabuf->ossmaxfrags <<= 1;
-		}
-		while (val > 65536) {
-			val >>= 1;
-			dmabuf->ossmaxfrags >>= 1;
-		}
-		dmabuf->ready = 0;
-#ifdef DEBUG
-		printk("SNDCTL_DSP_SETFRAGMENT 0x%x, %d, %d\n", val,
-		       dmabuf->ossfragsize, dmabuf->ossmaxfrags);
-#endif
-		return 0;
-	case SNDCTL_DSP_GETOSPACE:
-		if (!(file->f_mode & FMODE_WRITE))
-			return -EINVAL;
-		if (codec_independent_spdif_locked > 0) {
-			if (!dmabuf->ready && (val = prog_dmabuf(state, 2)) != 0)
-				return val;
-		} else {
-			if (controller_independent_spdif_locked > 0) {
-				if (!dmabuf->ready && (val = prog_dmabuf(state, 3)) != 0)
-					return val;
-			} else {
-				if (!dmabuf->ready && (val = prog_dmabuf(state, 0)) != 0)
-					return val;
-			}
-		}
-		spin_lock_irqsave(&state->card->lock, flags);
-		ali_update_ptr(state);
-		abinfo.fragsize = dmabuf->userfragsize;
-		abinfo.fragstotal = dmabuf->userfrags;
-		if (dmabuf->mapped)
-			abinfo.bytes = dmabuf->dmasize;
-		else
-			abinfo.bytes = ali_get_free_write_space(state);
-		abinfo.fragments = abinfo.bytes / dmabuf->userfragsize;
-		spin_unlock_irqrestore(&state->card->lock, flags);
-#if defined(DEBUG) || defined(DEBUG_MMAP)
-		printk("SNDCTL_DSP_GETOSPACE %d, %d, %d, %d\n",
-		       abinfo.bytes, abinfo.fragsize, abinfo.fragments,
-		       abinfo.fragstotal);
-#endif
-		return copy_to_user(argp, &abinfo,
-				    sizeof(abinfo)) ? -EFAULT : 0;
-	case SNDCTL_DSP_GETOPTR:
-		if (!(file->f_mode & FMODE_WRITE))
-			return -EINVAL;
-		if (codec_independent_spdif_locked > 0) {
-			if (!dmabuf->ready && (val = prog_dmabuf(state, 2)) != 0)
-				return val;
-		} else {
-			if (controller_independent_spdif_locked > 0) {
-				if (!dmabuf->ready && (val = prog_dmabuf(state, 3)) != 0)
-					return val;
-			} else {
-				if (!dmabuf->ready && (val = prog_dmabuf(state, 0)) != 0)
-					return val;
-			}
-		}
-		spin_lock_irqsave(&state->card->lock, flags);
-		val = ali_get_free_write_space(state);
-		cinfo.bytes = dmabuf->total_bytes;
-		cinfo.ptr = dmabuf->hwptr;
-		cinfo.blocks = val / dmabuf->userfragsize;
-		if (codec_independent_spdif_locked > 0) {
-			if (dmabuf->mapped && (dmabuf->trigger & SPDIF_ENABLE_OUTPUT)) {
-				dmabuf->count += val;
-				dmabuf->swptr = (dmabuf->swptr + val) % dmabuf->dmasize;
-				__ali_update_lvi(state, 2);
-			}
-		} else {
-			if (controller_independent_spdif_locked > 0) {
-				if (dmabuf->mapped && (dmabuf->trigger & SPDIF_ENABLE_OUTPUT)) {
-					dmabuf->count += val;
-					dmabuf->swptr = (dmabuf->swptr + val) % dmabuf->dmasize;
-					__ali_update_lvi(state, 3);
-				}
-			} else {
-				if (dmabuf->mapped && (dmabuf->trigger & PCM_ENABLE_OUTPUT)) {
-					dmabuf->count += val;
-					dmabuf->swptr = (dmabuf->swptr + val) % dmabuf->dmasize;
-					__ali_update_lvi(state, 0);
-				}
-			}
-		}
-		spin_unlock_irqrestore(&state->card->lock, flags);
-#if defined(DEBUG) || defined(DEBUG_MMAP)
-		printk("SNDCTL_DSP_GETOPTR %d, %d, %d, %d\n", cinfo.bytes,
-		       cinfo.blocks, cinfo.ptr, dmabuf->count);
-#endif
-		return copy_to_user(argp, &cinfo, sizeof(cinfo))? -EFAULT : 0;
-	case SNDCTL_DSP_GETISPACE:
-		if (!(file->f_mode & FMODE_READ))
-			return -EINVAL;
-		if (!dmabuf->ready && (val = prog_dmabuf(state, 1)) != 0)
-			return val;
-		spin_lock_irqsave(&state->card->lock, flags);
-		abinfo.bytes = ali_get_available_read_data(state);
-		abinfo.fragsize = dmabuf->userfragsize;
-		abinfo.fragstotal = dmabuf->userfrags;
-		abinfo.fragments = abinfo.bytes / dmabuf->userfragsize;
-		spin_unlock_irqrestore(&state->card->lock, flags);
-#if defined(DEBUG) || defined(DEBUG_MMAP)
-		printk("SNDCTL_DSP_GETISPACE %d, %d, %d, %d\n",
-		       abinfo.bytes, abinfo.fragsize, abinfo.fragments,
-		       abinfo.fragstotal);
-#endif
-		return copy_to_user(argp, &abinfo,
-				    sizeof(abinfo)) ? -EFAULT : 0;
-	case SNDCTL_DSP_GETIPTR:
-		if (!(file->f_mode & FMODE_READ))
-			return -EINVAL;
-		if (!dmabuf->ready && (val = prog_dmabuf(state, 0)) != 0)
-			return val;
-		spin_lock_irqsave(&state->card->lock, flags);
-		val = ali_get_available_read_data(state);
-		cinfo.bytes = dmabuf->total_bytes;
-		cinfo.blocks = val / dmabuf->userfragsize;
-		cinfo.ptr = dmabuf->hwptr;
-		if (dmabuf->mapped && (dmabuf->trigger & PCM_ENABLE_INPUT)) {
-			dmabuf->count -= val;
-			dmabuf->swptr = (dmabuf->swptr + val) % dmabuf->dmasize;
-			__ali_update_lvi(state, 1);
-		}
-		spin_unlock_irqrestore(&state->card->lock, flags);
-#if defined(DEBUG) || defined(DEBUG_MMAP)
-		printk("SNDCTL_DSP_GETIPTR %d, %d, %d, %d\n", cinfo.bytes,
-		       cinfo.blocks, cinfo.ptr, dmabuf->count);
-#endif
-		return copy_to_user(argp, &cinfo, sizeof(cinfo))? -EFAULT: 0;
-	case SNDCTL_DSP_NONBLOCK:
-#ifdef DEBUG
-		printk("SNDCTL_DSP_NONBLOCK\n");
-#endif
-		file->f_flags |= O_NONBLOCK;
-		return 0;
-	case SNDCTL_DSP_GETCAPS:
-#ifdef DEBUG
-		printk("SNDCTL_DSP_GETCAPS\n");
-#endif
-		return put_user(DSP_CAP_REALTIME | DSP_CAP_TRIGGER |
-				DSP_CAP_MMAP | DSP_CAP_BIND, p);
-	case SNDCTL_DSP_GETTRIGGER:
-		val = 0;
-#ifdef DEBUG
-		printk("SNDCTL_DSP_GETTRIGGER 0x%x\n", dmabuf->trigger);
-#endif
-		return put_user(dmabuf->trigger, p);
-	case SNDCTL_DSP_SETTRIGGER:
-		if (get_user(val, p))
-			return -EFAULT;
-#if defined(DEBUG) || defined(DEBUG_MMAP)
-		printk("SNDCTL_DSP_SETTRIGGER 0x%x\n", val);
-#endif
-		if (!(val & PCM_ENABLE_INPUT) && dmabuf->enable == ADC_RUNNING) {
-			stop_adc(state);
-		}
-		if (!(val & PCM_ENABLE_OUTPUT) && dmabuf->enable == DAC_RUNNING) {
-			stop_dac(state);
-		}
-		if (!(val & SPDIF_ENABLE_OUTPUT) && dmabuf->enable == CODEC_SPDIFOUT_RUNNING) {
-			stop_spdifout(state);
-		}
-		if (!(val & SPDIF_ENABLE_OUTPUT) && dmabuf->enable == CONTROLLER_SPDIFOUT_RUNNING) {
-			stop_spdifout(state);
-		}
-		dmabuf->trigger = val;
-		if (val & PCM_ENABLE_OUTPUT && !(dmabuf->enable & DAC_RUNNING)) {
-			if (!dmabuf->write_channel) {
-				dmabuf->ready = 0;
-				dmabuf->write_channel = state->card->alloc_pcm_channel(state->card);
-				if (!dmabuf->write_channel)
-					return -EBUSY;
-			}
-			if (!dmabuf->ready && (ret = prog_dmabuf(state, 0)))
-				return ret;
-			if (dmabuf->mapped) {
-				spin_lock_irqsave(&state->card->lock, flags);
-				ali_update_ptr(state);
-				dmabuf->count = 0;
-				dmabuf->swptr = dmabuf->hwptr;
-				dmabuf->count = ali_get_free_write_space(state);
-				dmabuf->swptr = (dmabuf->swptr + dmabuf->count) % dmabuf->dmasize;
-				__ali_update_lvi(state, 0);
-				spin_unlock_irqrestore(&state->card->lock,
-						       flags);
-			} else
-				start_dac(state);
-		}
-		if (val & SPDIF_ENABLE_OUTPUT && !(dmabuf->enable & CODEC_SPDIFOUT_RUNNING)) {
-			if (!dmabuf->codec_spdifout_channel) {
-				dmabuf->ready = 0;
-				dmabuf->codec_spdifout_channel = state->card->alloc_codec_spdifout_channel(state->card);
-				if (!dmabuf->codec_spdifout_channel)
-					return -EBUSY;
-			}
-			if (!dmabuf->ready && (ret = prog_dmabuf(state, 2)))
-				return ret;
-			if (dmabuf->mapped) {
-				spin_lock_irqsave(&state->card->lock, flags);
-				ali_update_ptr(state);
-				dmabuf->count = 0;
-				dmabuf->swptr = dmabuf->hwptr;
-				dmabuf->count = ali_get_free_write_space(state);
-				dmabuf->swptr = (dmabuf->swptr + dmabuf->count) % dmabuf->dmasize;
-				__ali_update_lvi(state, 2);
-				spin_unlock_irqrestore(&state->card->lock,
-						       flags);
-			} else
-				start_spdifout(state);
-		}
-		if (val & SPDIF_ENABLE_OUTPUT && !(dmabuf->enable & CONTROLLER_SPDIFOUT_RUNNING)) {
-			if (!dmabuf->controller_spdifout_channel) {
-				dmabuf->ready = 0;
-				dmabuf->controller_spdifout_channel = state->card->alloc_controller_spdifout_channel(state->card);
-				if (!dmabuf->controller_spdifout_channel)
-					return -EBUSY;
-			}
-			if (!dmabuf->ready && (ret = prog_dmabuf(state, 3)))
-				return ret;
-			if (dmabuf->mapped) {
-				spin_lock_irqsave(&state->card->lock, flags);
-				ali_update_ptr(state);
-				dmabuf->count = 0;
-				dmabuf->swptr = dmabuf->hwptr;
-				dmabuf->count = ali_get_free_write_space(state);
-				dmabuf->swptr = (dmabuf->swptr + dmabuf->count) % dmabuf->dmasize;
-				__ali_update_lvi(state, 3);
-				spin_unlock_irqrestore(&state->card->lock, flags);
-			} else
-				start_spdifout(state);
-		}
-		if (val & PCM_ENABLE_INPUT && !(dmabuf->enable & ADC_RUNNING)) {
-			if (!dmabuf->read_channel) {
-				dmabuf->ready = 0;
-				dmabuf->read_channel = state->card->alloc_rec_pcm_channel(state->card);
-				if (!dmabuf->read_channel)
-					return -EBUSY;
-			}
-			if (!dmabuf->ready && (ret = prog_dmabuf(state, 1)))
-				return ret;
-			if (dmabuf->mapped) {
-				spin_lock_irqsave(&state->card->lock,
-						  flags);
-				ali_update_ptr(state);
-				dmabuf->swptr = dmabuf->hwptr;
-				dmabuf->count = 0;
-				spin_unlock_irqrestore(&state->card->lock, flags);
-			}
-			ali_update_lvi(state, 1);
-			start_adc(state);
-		}
-		return 0;
-	case SNDCTL_DSP_SETDUPLEX:
-#ifdef DEBUG
-		printk("SNDCTL_DSP_SETDUPLEX\n");
-#endif
-		return -EINVAL;
-	case SNDCTL_DSP_GETODELAY:
-		if (!(file->f_mode & FMODE_WRITE))
-			return -EINVAL;
-		spin_lock_irqsave(&state->card->lock, flags);
-		ali_update_ptr(state);
-		val = dmabuf->count;
-		spin_unlock_irqrestore(&state->card->lock, flags);
-#ifdef DEBUG
-		printk("SNDCTL_DSP_GETODELAY %d\n", dmabuf->count);
-#endif
-		return put_user(val, p);
-	case SOUND_PCM_READ_RATE:
-#ifdef DEBUG
-		printk("SOUND_PCM_READ_RATE %d\n", dmabuf->rate);
-#endif
-		return put_user(dmabuf->rate, p);
-	case SOUND_PCM_READ_CHANNELS:
-#ifdef DEBUG
-		printk("SOUND_PCM_READ_CHANNELS\n");
-#endif
-		return put_user(2, p);
-	case SOUND_PCM_READ_BITS:
-#ifdef DEBUG
-		printk("SOUND_PCM_READ_BITS\n");
-#endif
-		return put_user(AFMT_S16_LE, p);
-	case SNDCTL_DSP_SETSPDIF:	/* Set S/PDIF Control register */
-#ifdef DEBUG
-		printk("SNDCTL_DSP_SETSPDIF\n");
-#endif
-		if (get_user(val, p))
-			return -EFAULT;
-		/* Check to make sure the codec supports S/PDIF transmitter */
-		if ((state->card->ac97_features & 4)) {
-			/* mask out the transmitter speed bits so the user can't set them */
-			val &= ~0x3000;
-			/* Add the current transmitter speed bits to the passed value */
-			ret = ali_ac97_get(codec, AC97_SPDIF_CONTROL);
-			val |= (ret & 0x3000);
-			ali_ac97_set(codec, AC97_SPDIF_CONTROL, val);
-			if (ali_ac97_get(codec, AC97_SPDIF_CONTROL) != val) {
-				printk(KERN_ERR "ali_audio: Unable to set S/PDIF configuration to 0x%04x.\n", val);
-				return -EFAULT;
-			}
-		}
-#ifdef DEBUG
-		else
-			printk(KERN_WARNING "ali_audio: S/PDIF transmitter not avalible.\n");
-#endif
-		return put_user(val, p);
-	case SNDCTL_DSP_GETSPDIF:	/* Get S/PDIF Control register */
-#ifdef DEBUG
-		printk("SNDCTL_DSP_GETSPDIF\n");
-#endif
-		if (get_user(val, p))
-			return -EFAULT;
-		/* Check to make sure the codec supports S/PDIF transmitter */
-		if (!(state->card->ac97_features & 4)) {
-#ifdef DEBUG
-			printk(KERN_WARNING "ali_audio: S/PDIF transmitter not avalible.\n");
-#endif
-			val = 0;
-		} else {
-			val = ali_ac97_get(codec, AC97_SPDIF_CONTROL);
-		}
-
-		return put_user(val, p);
-//end add support spdif out
-//add support 4,6 channel
-	case SNDCTL_DSP_GETCHANNELMASK:
-#ifdef DEBUG
-		printk("SNDCTL_DSP_GETCHANNELMASK\n");
-#endif
-		if (get_user(val, p))
-			return -EFAULT;
-		/* Based on AC'97 DAC support, not ICH hardware */
-		val = DSP_BIND_FRONT;
-		if (state->card->ac97_features & 0x0004)
-			val |= DSP_BIND_SPDIF;
-		if (state->card->ac97_features & 0x0080)
-			val |= DSP_BIND_SURR;
-		if (state->card->ac97_features & 0x0140)
-			val |= DSP_BIND_CENTER_LFE;
-		return put_user(val, p);
-	case SNDCTL_DSP_BIND_CHANNEL:
-#ifdef DEBUG
-		printk("SNDCTL_DSP_BIND_CHANNEL\n");
-#endif
-		if (get_user(val, p))
-			return -EFAULT;
-		if (val == DSP_BIND_QUERY) {
-			val = DSP_BIND_FRONT;	/* Always report this as being enabled */
-			if (state->card->ac97_status & SPDIF_ON)
-				val |= DSP_BIND_SPDIF;
-			else {
-				if (state->card->ac97_status & SURR_ON)
-					val |= DSP_BIND_SURR;
-				if (state->card->
-				    ac97_status & CENTER_LFE_ON)
-					val |= DSP_BIND_CENTER_LFE;
-			}
-		} else {	/* Not a query, set it */
-			if (!(file->f_mode & FMODE_WRITE))
-				return -EINVAL;
-			if (dmabuf->enable == DAC_RUNNING) {
-				stop_dac(state);
-			}
-			if (val & DSP_BIND_SPDIF) {	/* Turn on SPDIF */
-				/*  Ok, this should probably define what slots
-				 *  to use. For now, we'll only set it to the
-				 *  defaults:
-				 * 
-				 *   non multichannel codec maps to slots 3&4
-				 *   2 channel codec maps to slots 7&8
-				 *   4 channel codec maps to slots 6&9
-				 *   6 channel codec maps to slots 10&11
-				 *
-				 *  there should be some way for the app to
-				 *  select the slot assignment.
-				 */
-				i_scr = inl(state->card->iobase + ALI_SCR);
-				if (codec_independent_spdif_locked > 0) {
-
-					if ((i_scr & 0x00300000) == 0x00100000) {
-						ali_set_spdif_output(state, AC97_EA_SPSA_7_8, codec_independent_spdif_locked);
-					} else {
-						if ((i_scr & 0x00300000) == 0x00200000) {
-							ali_set_spdif_output(state, AC97_EA_SPSA_6_9, codec_independent_spdif_locked);
-						} else {
-							if ((i_scr & 0x00300000) == 0x00300000) {
-								ali_set_spdif_output(state, AC97_EA_SPSA_10_11, codec_independent_spdif_locked);
-							}
-						}
-					}
-				} else {	/* codec spdif out (pcm out share ) */
-					ali_set_spdif_output(state, AC97_EA_SPSA_3_4, dmabuf->rate);	//I do not modify
-				}
-
-				if (!(state->card->ac97_status & SPDIF_ON))
-					val &= ~DSP_BIND_SPDIF;
-			} else {
-				int mask;
-				int channels;
-				/* Turn off S/PDIF if it was on */
-				if (state->card->ac97_status & SPDIF_ON)
-					ali_set_spdif_output(state, -1, 0);
-				mask =
-				    val & (DSP_BIND_FRONT | DSP_BIND_SURR |
-					   DSP_BIND_CENTER_LFE);
-				switch (mask) {
-				case DSP_BIND_FRONT:
-					channels = 2;
-					break;
-				case DSP_BIND_FRONT | DSP_BIND_SURR:
-					channels = 4;
-					break;
-				case DSP_BIND_FRONT | DSP_BIND_SURR | DSP_BIND_CENTER_LFE:
-					channels = 6;
-					break;
-				default:
-					val = DSP_BIND_FRONT;
-					channels = 2;
-					break;
-				}
-				ali_set_dac_channels(state, channels);
-				/* check that they really got turned on */
-				if (!state->card->ac97_status & SURR_ON)
-					val &= ~DSP_BIND_SURR;
-				if (!state->card->
-				    ac97_status & CENTER_LFE_ON)
-					val &= ~DSP_BIND_CENTER_LFE;
-			}
-		}
-		return put_user(val, p);
-	case SNDCTL_DSP_MAPINBUF:
-	case SNDCTL_DSP_MAPOUTBUF:
-	case SNDCTL_DSP_SETSYNCRO:
-	case SOUND_PCM_WRITE_FILTER:
-	case SOUND_PCM_READ_FILTER:
-		return -EINVAL;
-	}
-	return -EINVAL;
-}
-
-static int ali_open(struct inode *inode, struct file *file)
-{
-	int i = 0;
-	struct ali_card *card = devs;
-	struct ali_state *state = NULL;
-	struct dmabuf *dmabuf = NULL;
-	unsigned int i_scr;
-	
-	/* find an available virtual channel (instance of /dev/dsp) */
-	
-	while (card != NULL) {
-
-		/*
-		 * If we are initializing and then fail, card could go
-		 * away unuexpectedly while we are in the for() loop.
-		 * So, check for card on each iteration before we check
-		 * for card->initializing to avoid a possible oops.
-		 * This usually only matters for times when the driver is
-		 * autoloaded by kmod.
-		 */
-		for (i = 0; i < 50 && card && card->initializing; i++) {
-			set_current_state(TASK_UNINTERRUPTIBLE);
-			schedule_timeout(HZ / 20);
-		}
-
-		for (i = 0; i < NR_HW_CH && card && !card->initializing; i++) {
-			if (card->states[i] == NULL) {
-				state = card->states[i] = (struct ali_state *) kmalloc(sizeof(struct ali_state), GFP_KERNEL);
-				if (state == NULL)
-					return -ENOMEM;
-				memset(state, 0, sizeof(struct ali_state));
-				dmabuf = &state->dmabuf;
-				goto found_virt;
-			}
-		}
-		card = card->next;
-	}
-
-	/* no more virtual channel avaiable */
-	if (!state)
-		return -ENODEV;
-found_virt:
-	/* initialize the virtual channel */
-
-	state->virt = i;
-	state->card = card;
-	state->magic = ALI5455_STATE_MAGIC;
-	init_waitqueue_head(&dmabuf->wait);
-	mutex_init(&state->open_mutex);
-	file->private_data = state;
-	dmabuf->trigger = 0;
-	/* allocate hardware channels */
-	if (file->f_mode & FMODE_READ) {
-		if ((dmabuf->read_channel =
-		     card->alloc_rec_pcm_channel(card)) == NULL) {
-			kfree(card->states[i]);
-			card->states[i] = NULL;
-			return -EBUSY;
-		}
-		dmabuf->trigger |= PCM_ENABLE_INPUT;
-		ali_set_adc_rate(state, 8000);
-	}
-	if (file->f_mode & FMODE_WRITE) {
-		if (codec_independent_spdif_locked > 0) {
-			if ((dmabuf->codec_spdifout_channel = card->alloc_codec_spdifout_channel(card)) == NULL) {
-				kfree(card->states[i]);
-				card->states[i] = NULL;
-				return -EBUSY;
-			}
-			dmabuf->trigger |= SPDIF_ENABLE_OUTPUT;
-			ali_set_codecspdifout_rate(state, codec_independent_spdif_locked);	//It must add
-			i_scr = inl(state->card->iobase + ALI_SCR);
-			if ((i_scr & 0x00300000) == 0x00100000) {
-				ali_set_spdif_output(state, AC97_EA_SPSA_7_8, codec_independent_spdif_locked);
-			} else {
-				if ((i_scr & 0x00300000) == 0x00200000) {
-					ali_set_spdif_output(state, AC97_EA_SPSA_6_9, codec_independent_spdif_locked);
-				} else {
-					if ((i_scr & 0x00300000) == 0x00300000) {
-						ali_set_spdif_output(state, AC97_EA_SPSA_10_11, codec_independent_spdif_locked);
-					} else {
-						ali_set_spdif_output(state, AC97_EA_SPSA_7_8, codec_independent_spdif_locked);
-					}
-				}
-
-			}
-		} else {
-			if (controller_independent_spdif_locked > 0) {
-				if ((dmabuf->controller_spdifout_channel = card->alloc_controller_spdifout_channel(card)) == NULL) {
-					kfree(card->states[i]);
-					card->states[i] = NULL;
-					return -EBUSY;
-				}
-				dmabuf->trigger |= SPDIF_ENABLE_OUTPUT;
-				ali_set_spdifout_rate(state, controller_independent_spdif_locked);
-			} else {
-				if ((dmabuf->write_channel = card->alloc_pcm_channel(card)) == NULL) {
-					kfree(card->states[i]);
-					card->states[i] = NULL;
-					return -EBUSY;
-				}
-				/* Initialize to 8kHz?  What if we don't support 8kHz? */
-				/*  Let's change this to check for S/PDIF stuff */
-
-				dmabuf->trigger |= PCM_ENABLE_OUTPUT;
-				if (codec_pcmout_share_spdif_locked) {
-					ali_set_dac_rate(state, codec_pcmout_share_spdif_locked);
-					ali_set_spdif_output(state, AC97_EA_SPSA_3_4, codec_pcmout_share_spdif_locked);
-				} else {
-					ali_set_dac_rate(state, 8000);
-				}
-			}
-
-		}
-	}
-
-	/* set default sample format. According to OSS Programmer's Guide  /dev/dsp
-	   should be default to unsigned 8-bits, mono, with sample rate 8kHz and
-	   /dev/dspW will accept 16-bits sample, but we don't support those so we
-	   set it immediately to stereo and 16bit, which is all we do support */
-	dmabuf->fmt |= ALI5455_FMT_16BIT | ALI5455_FMT_STEREO;
-	dmabuf->ossfragsize = 0;
-	dmabuf->ossmaxfrags = 0;
-	dmabuf->subdivision = 0;
-	state->open_mode |= file->f_mode & (FMODE_READ | FMODE_WRITE);
-	outl(0x00000000, card->iobase + ALI_INTERRUPTCR);
-	outl(0x00000000, card->iobase + ALI_INTERRUPTSR);
-	return nonseekable_open(inode, file);
-}
-
-static int ali_release(struct inode *inode, struct file *file)
-{
-	struct ali_state *state = (struct ali_state *) file->private_data;
-	struct ali_card *card = state->card;
-	struct dmabuf *dmabuf = &state->dmabuf;
-	unsigned long flags;
-	lock_kernel();
-	
-	/* stop DMA state machine and free DMA buffers/channels */
-	if (dmabuf->trigger & PCM_ENABLE_OUTPUT)
-		drain_dac(state, 0);
-
-	if (dmabuf->trigger & SPDIF_ENABLE_OUTPUT)
-		drain_spdifout(state, 0);
-	
-	if (dmabuf->trigger & PCM_ENABLE_INPUT)
-		stop_adc(state);
-	
-	spin_lock_irqsave(&card->lock, flags);
-	dealloc_dmabuf(state);
-	if (file->f_mode & FMODE_WRITE) {
-		if (codec_independent_spdif_locked > 0) {
-			state->card->free_pcm_channel(state->card, dmabuf->codec_spdifout_channel->num);
-		} else {
-			if (controller_independent_spdif_locked > 0)
-				state->card->free_pcm_channel(state->card,
-							      dmabuf->controller_spdifout_channel->num);
-			else state->card->free_pcm_channel(state->card,
-							      dmabuf->write_channel->num);
-		}
-	}
-	if (file->f_mode & FMODE_READ)
-		state->card->free_pcm_channel(state->card, dmabuf->read_channel->num);
-
-	state->card->states[state->virt] = NULL;
-	kfree(state);
-	spin_unlock_irqrestore(&card->lock, flags);
-	unlock_kernel();
-	return 0;
-}
-
-static /*const */ struct file_operations ali_audio_fops = {
-	.owner		= THIS_MODULE, 
-	.llseek		= no_llseek, 
-	.read		= ali_read,
-	.write		= ali_write, 
-	.poll		= ali_poll,
-	.ioctl		= ali_ioctl,
-	.mmap		= ali_mmap,
-	.open		= ali_open,
-	.release	= ali_release,
-};
-
-/* Read AC97 codec registers */
-static u16 ali_ac97_get(struct ac97_codec *dev, u8 reg)
-{
-	struct ali_card *card = dev->private_data;
-	int count1 = 100;
-	char val;
-	unsigned short int data = 0, count, addr1, addr2 = 0;
-
-	spin_lock(&card->ac97_lock);
-	while (count1-- && (inl(card->iobase + ALI_CAS) & 0x80000000))
-		udelay(1);
-
-	addr1 = reg;
-	reg |= 0x0080;
-	for (count = 0; count < 0x7f; count++) {
-		val = inb(card->iobase + ALI_CSPSR);
-		if (val & 0x08)
-			break;
-	}
-	if (count == 0x7f)
-	{
-		spin_unlock(&card->ac97_lock);
-		return -1;
-	}
-	outw(reg, (card->iobase + ALI_CPR) + 2);
-	for (count = 0; count < 0x7f; count++) {
-		val = inb(card->iobase + ALI_CSPSR);
-		if (val & 0x02) {
-			data = inw(card->iobase + ALI_SPR);
-			addr2 = inw((card->iobase + ALI_SPR) + 2);
-			break;
-		}
-	}
-	spin_unlock(&card->ac97_lock);
-	if (count == 0x7f)
-		return -1;
-	if (addr2 != addr1)
-		return -1;
-	return ((u16) data);
-}
-
-/* write ac97 codec register   */
-
-static void ali_ac97_set(struct ac97_codec *dev, u8 reg, u16 data)
-{
-	struct ali_card *card = dev->private_data;
-	int count1 = 100;
-	char val;
-	unsigned short int count;
-
-	spin_lock(&card->ac97_lock);
-	while (count1-- && (inl(card->iobase + ALI_CAS) & 0x80000000))
-		udelay(1);
-
-	for (count = 0; count < 0x7f; count++) {
-		val = inb(card->iobase + ALI_CSPSR);
-		if (val & 0x08)
-			break;
-	}
-	if (count == 0x7f) {
-		printk(KERN_WARNING "ali_ac97_set: AC97 codec register access timed out. \n");
-		spin_unlock(&card->ac97_lock);
-		return;
-	}
-	outw(data, (card->iobase + ALI_CPR));
-	outb(reg, (card->iobase + ALI_CPR) + 2);
-	for (count = 0; count < 0x7f; count++) {
-		val = inb(card->iobase + ALI_CSPSR);
-		if (val & 0x01)
-			break;
-	}
-	spin_unlock(&card->ac97_lock);
-	if (count == 0x7f)
-		printk(KERN_WARNING "ali_ac97_set: AC97 codec register access timed out. \n");
-	return;
-}
-
-/* OSS /dev/mixer file operation methods */
-
-static int ali_open_mixdev(struct inode *inode, struct file *file)
-{
-	int i;
-	int minor = iminor(inode);
-	struct ali_card *card = devs;
-	for (card = devs; card != NULL; card = card->next) {
-		/*
-		 * If we are initializing and then fail, card could go
-		 * away unuexpectedly while we are in the for() loop.
-		 * So, check for card on each iteration before we check
-		 * for card->initializing to avoid a possible oops.
-		 * This usually only matters for times when the driver is
-		 * autoloaded by kmod.
-		 */
-		for (i = 0; i < 50 && card && card->initializing; i++) {
-			set_current_state(TASK_UNINTERRUPTIBLE);
-			schedule_timeout(HZ / 20);
-		}
-		for (i = 0; i < NR_AC97 && card && !card->initializing; i++)
-			if (card->ac97_codec[i] != NULL
-			    && card->ac97_codec[i]->dev_mixer == minor) {
-				file->private_data = card->ac97_codec[i];
-				return nonseekable_open(inode, file);
-			}
-	}
-	return -ENODEV;
-}
-
-static int ali_ioctl_mixdev(struct inode *inode,
-			    struct file *file,
-			    unsigned int cmd, unsigned long arg)
-{
-	struct ac97_codec *codec = (struct ac97_codec *) file->private_data;
-	return codec->mixer_ioctl(codec, cmd, arg);
-}
-
-static /*const */ struct file_operations ali_mixer_fops = {
-	.owner	= THIS_MODULE, 
-	.llseek	= no_llseek, 
-	.ioctl	= ali_ioctl_mixdev,
-	.open	= ali_open_mixdev,
-};
-
-/* AC97 codec initialisation.  These small functions exist so we don't
-   duplicate code between module init and apm resume */
-
-static inline int ali_ac97_exists(struct ali_card *card, int ac97_number)
-{
-	unsigned int i = 1;
-	u32 reg = inl(card->iobase + ALI_RTSR);
-	if (ac97_number) {
-		while (i < 100) {
-
-			reg = inl(card->iobase + ALI_RTSR);
-			if (reg & 0x40) {
-				break;
-			} else {
-				outl(reg | 0x00000040,
-				     card->iobase + 0x34);
-				udelay(1);
-			}
-			i++;
-		}
-
-	} else {
-		while (i < 100) {
-			reg = inl(card->iobase + ALI_RTSR);
-			if (reg & 0x80) {
-				break;
-			} else {
-				outl(reg | 0x00000080,
-				     card->iobase + 0x34);
-				udelay(1);
-			}
-			i++;
-		}
-	}
-
-	if (ac97_number)
-		return reg & 0x40;
-	else
-		return reg & 0x80;
-}
-
-static inline int ali_ac97_enable_variable_rate(struct ac97_codec *codec)
-{
-	ali_ac97_set(codec, AC97_EXTENDED_STATUS, 9);
-	ali_ac97_set(codec, AC97_EXTENDED_STATUS, ali_ac97_get(codec, AC97_EXTENDED_STATUS) | 0xE800);
-	return (ali_ac97_get(codec, AC97_EXTENDED_STATUS) & 1);
-}
-
-
-static int ali_ac97_probe_and_powerup(struct ali_card *card, struct ac97_codec *codec)
-{
-	/* Returns 0 on failure */
-	int i;
-	u16 addr;
-	if (ac97_probe_codec(codec) == 0)
-		return 0;
-	/* ac97_probe_codec is success ,then begin to init codec */
-	ali_ac97_set(codec, AC97_RESET, 0xffff);
-	if (card->channel[0].used == 1) {
-		ali_ac97_set(codec, AC97_RECORD_SELECT, 0x0000);
-		ali_ac97_set(codec, AC97_LINEIN_VOL, 0x0808);
-		ali_ac97_set(codec, AC97_RECORD_GAIN, 0x0F0F);
-	}
-
-	if (card->channel[2].used == 1)	//if MICin then init codec
-	{
-		ali_ac97_set(codec, AC97_RECORD_SELECT, 0x0000);
-		ali_ac97_set(codec, AC97_MIC_VOL, 0x8808);
-		ali_ac97_set(codec, AC97_RECORD_GAIN, 0x0F0F);
-		ali_ac97_set(codec, AC97_RECORD_GAIN_MIC, 0x0000);
-	}
-
-	ali_ac97_set(codec, AC97_MASTER_VOL_STEREO, 0x0000);
-	ali_ac97_set(codec, AC97_HEADPHONE_VOL, 0x0000);
-	ali_ac97_set(codec, AC97_PCMOUT_VOL, 0x0000);
-	ali_ac97_set(codec, AC97_CD_VOL, 0x0808);
-	ali_ac97_set(codec, AC97_VIDEO_VOL, 0x0808);
-	ali_ac97_set(codec, AC97_AUX_VOL, 0x0808);
-	ali_ac97_set(codec, AC97_PHONE_VOL, 0x8048);
-	ali_ac97_set(codec, AC97_PCBEEP_VOL, 0x0000);
-	ali_ac97_set(codec, AC97_GENERAL_PURPOSE, AC97_GP_MIX);
-	ali_ac97_set(codec, AC97_MASTER_VOL_MONO, 0x0000);
-	ali_ac97_set(codec, 0x38, 0x0000);
-	addr = ali_ac97_get(codec, 0x2a);
-	ali_ac97_set(codec, 0x2a, addr | 0x0001);
-	addr = ali_ac97_get(codec, 0x2a);
-	addr = ali_ac97_get(codec, 0x28);
-	ali_ac97_set(codec, 0x2c, 0xbb80);
-	addr = ali_ac97_get(codec, 0x2c);
-	/* power it all up */
-	ali_ac97_set(codec, AC97_POWER_CONTROL,
-		     ali_ac97_get(codec, AC97_POWER_CONTROL) & ~0x7f00);
-	/* wait for analog ready */
-	for (i = 10; i && ((ali_ac97_get(codec, AC97_POWER_CONTROL) & 0xf) != 0xf); i--) {
-		set_current_state(TASK_UNINTERRUPTIBLE);
-		schedule_timeout(HZ / 20);
-	}
-	/* FIXME !! */
-	i++;
-	return i;
-}
-
-
-/* I clone ali5455(2.4.7 )  not clone i810_audio(2.4.18)  */
-
-static int ali_reset_5455(struct ali_card *card)
-{
-	outl(0x80000003, card->iobase + ALI_SCR);
-	outl(0x83838383, card->iobase + ALI_FIFOCR1);
-	outl(0x83838383, card->iobase + ALI_FIFOCR2);
-	if (controller_pcmout_share_spdif_locked > 0) {
-		outl((inl(card->iobase + ALI_SPDIFICS) | 0x00000001),
-		     card->iobase + ALI_SPDIFICS);
-		outl(0x0408000a, card->iobase + ALI_INTERFACECR);
-	} else {
-		if (codec_independent_spdif_locked > 0) {
-			outl((inl(card->iobase + ALI_SCR) | 0x00100000), card->iobase + ALI_SCR);	// now I select slot 7 & 8
-			outl(0x00200000, card->iobase + ALI_INTERFACECR);	//enable codec independent spdifout 
-		} else
-			outl(0x04080002, card->iobase + ALI_INTERFACECR);
-	}
-
-	outl(0x00000000, card->iobase + ALI_INTERRUPTCR);
-	outl(0x00000000, card->iobase + ALI_INTERRUPTSR);
-	if (controller_independent_spdif_locked > 0)
-		outl((inl(card->iobase + ALI_SPDIFICS) | 0x00000001),
-		     card->iobase + ALI_SPDIFICS);
-	return 1;
-}
-
-
-static int ali_ac97_random_init_stuff(struct ali_card
-				      *card)
-{
-	u32 reg = inl(card->iobase + ALI_SCR);
-	int i = 0;
-	reg = inl(card->iobase + ALI_SCR);
-	if ((reg & 2) == 0)	/* Cold required */
-		reg |= 2;
-	else
-		reg |= 1;	/* Warm */
-	reg &= ~0x80000000;	/* ACLink on */
-	outl(reg, card->iobase + ALI_SCR);
-
-	while (i < 10) {
-		if ((inl(card->iobase + 0x18) & (1 << 1)) == 0)
-			break;
-		current->state = TASK_UNINTERRUPTIBLE;
-		schedule_timeout(HZ / 20);
-		i++;
-	}
-	if (i == 10) {
-		printk(KERN_ERR "ali_audio: AC'97 reset failed.\n");
-		return 0;
-	}
-
-	set_current_state(TASK_UNINTERRUPTIBLE);
-	schedule_timeout(HZ / 2);
-	return 1;
-}
-
-/* AC97 codec initialisation. */
-
-static int __devinit ali_ac97_init(struct ali_card *card)
-{
-	int num_ac97 = 0;
-	int total_channels = 0;
-	struct ac97_codec *codec;
-	u16 eid;
-
-	if (!ali_ac97_random_init_stuff(card))
-		return 0;
-
-	/* Number of channels supported */
-	/* What about the codec?  Just because the ICH supports */
-	/* multiple channels doesn't mean the codec does.       */
-	/* we'll have to modify this in the codec section below */
-	/* to reflect what the codec has.                       */
-	/* ICH and ICH0 only support 2 channels so don't bother */
-	/* to check....                                         */
-	inl(card->iobase + ALI_CPR);
-	card->channels = 2;
-
-	for (num_ac97 = 0; num_ac97 < NR_AC97; num_ac97++) {
-
-		/* Assume codec isn't available until we go through the
-		 * gauntlet below */
-		card->ac97_codec[num_ac97] = NULL;
-		/* The ICH programmer's reference says you should   */
-		/* check the ready status before probing. So we chk */
-		/*   What do we do if it's not ready?  Wait and try */
-		/*   again, or abort?                               */
-		if (!ali_ac97_exists(card, num_ac97)) {
-			if (num_ac97 == 0)
-				printk(KERN_ERR "ali_audio: Primary codec not ready.\n");
-			break;
-		}
-
-		if ((codec = ac97_alloc_codec()) == NULL)
-			return -ENOMEM;
-		/* initialize some basic codec information, other fields will be filled
-		   in ac97_probe_codec */
-		codec->private_data = card;
-		codec->id = num_ac97;
-		codec->codec_read = ali_ac97_get;
-		codec->codec_write = ali_ac97_set;
-		if (!ali_ac97_probe_and_powerup(card, codec)) {
-			printk(KERN_ERR "ali_audio: timed out waiting for codec %d analog ready",
-			     num_ac97);
-			kfree(codec);
-			break;	/* it didn't work */
-		}
-		
-		/* Store state information about S/PDIF transmitter */
-		card->ac97_status = 0;
-		/* Don't attempt to get eid until powerup is complete */
-		eid = ali_ac97_get(codec, AC97_EXTENDED_ID);
-		if (eid == 0xFFFF) {
-			printk(KERN_ERR "ali_audio: no codec attached ?\n");
-			kfree(codec);
-			break;
-		}
-
-		card->ac97_features = eid;
-		/* Now check the codec for useful features to make up for
-		   the dumbness of the ali5455 hardware engine */
-		if (!(eid & 0x0001))
-			printk(KERN_WARNING
-			       "ali_audio: only 48Khz playback available.\n");
-		else {
-			if (!ali_ac97_enable_variable_rate(codec)) {
-				printk(KERN_WARNING
-				       "ali_audio: Codec refused to allow VRA, using 48Khz only.\n");
-				card->ac97_features &= ~1;
-			}
-		}
-
-		/* Determine how many channels the codec(s) support   */
-		/*   - The primary codec always supports 2            */
-		/*   - If the codec supports AMAP, surround DACs will */
-		/*     automaticlly get assigned to slots.            */
-		/*     * Check for surround DACs and increment if     */
-		/*       found.                                       */
-		/*   - Else check if the codec is revision 2.2        */
-		/*     * If surround DACs exist, assign them to slots */
-		/*       and increment channel count.                 */
-
-		/* All of this only applies to ICH2 and above. ICH    */
-		/* and ICH0 only support 2 channels.  ICH2 will only  */
-		/* support multiple codecs in a "split audio" config. */
-		/* as described above.                                */
-
-		/* TODO: Remove all the debugging messages!           */
-
-		if ((eid & 0xc000) == 0)	/* primary codec */
-			total_channels += 2;
-		if ((codec->dev_mixer = register_sound_mixer(&ali_mixer_fops, -1)) < 0) {
-			printk(KERN_ERR "ali_audio: couldn't register mixer!\n");
-			kfree(codec);
-			break;
-		}
-		card->ac97_codec[num_ac97] = codec;
-	}
-	/* pick the minimum of channels supported by ICHx or codec(s) */
-	card->channels = (card->channels > total_channels) ? total_channels : card->channels;
-	return num_ac97;
-}
-
-static void __devinit ali_configure_clocking(void)
-{
-	struct ali_card *card;
-	struct ali_state *state;
-	struct dmabuf *dmabuf;
-	unsigned int i, offset, new_offset;
-	unsigned long flags;
-	card = devs;
-
-	/* We could try to set the clocking for multiple cards, but can you even have
-	 * more than one ali in a machine?  Besides, clocking is global, so unless
-	 * someone actually thinks more than one ali in a machine is possible and
-	 * decides to rewrite that little bit, setting the rate for more than one card
-	 * is a waste of time.
-	 */
-	if (card != NULL) {
-		state = card->states[0] = (struct ali_state *)
-		    kmalloc(sizeof(struct ali_state), GFP_KERNEL);
-		if (state == NULL)
-			return;
-		memset(state, 0, sizeof(struct ali_state));
-		dmabuf = &state->dmabuf;
-		dmabuf->write_channel = card->alloc_pcm_channel(card);
-		state->virt = 0;
-		state->card = card;
-		state->magic = ALI5455_STATE_MAGIC;
-		init_waitqueue_head(&dmabuf->wait);
-		mutex_init(&state->open_mutex);
-		dmabuf->fmt = ALI5455_FMT_STEREO | ALI5455_FMT_16BIT;
-		dmabuf->trigger = PCM_ENABLE_OUTPUT;
-		ali_set_dac_rate(state, 48000);
-		if (prog_dmabuf(state, 0) != 0)
-			goto config_out_nodmabuf;
-		
-		if (dmabuf->dmasize < 16384)
-			goto config_out;
-		
-		dmabuf->count = dmabuf->dmasize;
-		outb(31, card->iobase + dmabuf->write_channel->port + OFF_LVI);
-
-		local_irq_save(flags);
-		start_dac(state);
-		offset = ali_get_dma_addr(state, 0);
-		mdelay(50);
-		new_offset = ali_get_dma_addr(state, 0);
-		stop_dac(state);
-		
-		outb(2, card->iobase + dmabuf->write_channel->port + OFF_CR);
-		local_irq_restore(flags);
-
-		i = new_offset - offset;
-
-		if (i == 0)
-			goto config_out;
-		i = i / 4 * 20;
-		if (i > 48500 || i < 47500) {
-			clocking = clocking * clocking / i;
-		}
-config_out:
-		dealloc_dmabuf(state);
-config_out_nodmabuf:
-		state->card->free_pcm_channel(state->card, state->dmabuf. write_channel->num);
-		kfree(state);
-		card->states[0] = NULL;
-	}
-}
-
-/* install the driver, we do not allocate hardware channel nor DMA buffer now, they are defered 
-   until "ACCESS" time (in prog_dmabuf called by open/read/write/ioctl/mmap) */
-
-static int __devinit ali_probe(struct pci_dev *pci_dev,
-			       const struct pci_device_id *pci_id)
-{
-	struct ali_card *card;
-	if (pci_enable_device(pci_dev))
-		return -EIO;
-	if (pci_set_dma_mask(pci_dev, ALI5455_DMA_MASK)) {
-		printk(KERN_ERR "ali5455: architecture does not support"
-		       " 32bit PCI busmaster DMA\n");
-		return -ENODEV;
-	}
-
-	if ((card = kmalloc(sizeof(struct ali_card), GFP_KERNEL)) == NULL) {
-		printk(KERN_ERR "ali_audio: out of memory\n");
-		return -ENOMEM;
-	}
-	memset(card, 0, sizeof(*card));
-	card->initializing = 1;
-	card->iobase = pci_resource_start(pci_dev, 0);
-	card->pci_dev = pci_dev;
-	card->pci_id = pci_id->device;
-	card->irq = pci_dev->irq;
-	card->next = devs;
-	card->magic = ALI5455_CARD_MAGIC;
-#ifdef CONFIG_PM
-	card->pm_suspended = 0;
-#endif
-	spin_lock_init(&card->lock);
-	spin_lock_init(&card->ac97_lock);
-	devs = card;
-	pci_set_master(pci_dev);
-	printk(KERN_INFO "ali: %s found at IO 0x%04lx, IRQ %d\n",
-	       card_names[pci_id->driver_data], card->iobase, card->irq);
-	card->alloc_pcm_channel = ali_alloc_pcm_channel;
-	card->alloc_rec_pcm_channel = ali_alloc_rec_pcm_channel;
-	card->alloc_rec_mic_channel = ali_alloc_rec_mic_channel;
-	card->alloc_codec_spdifout_channel = ali_alloc_codec_spdifout_channel;
-	card->alloc_controller_spdifout_channel = ali_alloc_controller_spdifout_channel;
-	card->free_pcm_channel = ali_free_pcm_channel;
-	card->channel[0].offset = 0;
-	card->channel[0].port = 0x40;
-	card->channel[0].num = 0;
-	card->channel[1].offset = 0;
-	card->channel[1].port = 0x50;
-	card->channel[1].num = 1;
-	card->channel[2].offset = 0;
-	card->channel[2].port = 0x60;
-	card->channel[2].num = 2;
-	card->channel[3].offset = 0;
-	card->channel[3].port = 0x70;
-	card->channel[3].num = 3;
-	card->channel[4].offset = 0;
-	card->channel[4].port = 0xb0;
-	card->channel[4].num = 4;
-	/* claim our iospace and irq */
-	request_region(card->iobase, 256, card_names[pci_id->driver_data]);
-	if (request_irq(card->irq, &ali_interrupt, IRQF_SHARED,
-			card_names[pci_id->driver_data], card)) {
-		printk(KERN_ERR "ali_audio: unable to allocate irq %d\n",
-		       card->irq);
-		release_region(card->iobase, 256);
-		kfree(card);
-		return -ENODEV;
-	}
-
-	if (ali_reset_5455(card) <= 0) {
-		unregister_sound_dsp(card->dev_audio);
-		release_region(card->iobase, 256);
-		free_irq(card->irq, card);
-		kfree(card);
-		return -ENODEV;
-	}
-
-	/* initialize AC97 codec and register /dev/mixer */
-	if (ali_ac97_init(card) < 0) {
-		release_region(card->iobase, 256);
-		free_irq(card->irq, card);
-		kfree(card);
-		return -ENODEV;
-	}
-	
-	pci_set_drvdata(pci_dev, card);
-	
-	if (clocking == 0) {
-		clocking = 48000;
-		ali_configure_clocking();
-	}
-
-	/* register /dev/dsp */
-	if ((card->dev_audio = register_sound_dsp(&ali_audio_fops, -1)) < 0) {
-		int i;
-		printk(KERN_ERR"ali_audio: couldn't register DSP device!\n");
-		release_region(card->iobase, 256);
-		free_irq(card->irq, card);
-		for (i = 0; i < NR_AC97; i++)
-			if (card->ac97_codec[i] != NULL) {
-				unregister_sound_mixer(card->ac97_codec[i]->dev_mixer);
-				kfree(card->ac97_codec[i]);
-			}
-		kfree(card);
-		return -ENODEV;
-	}
-	card->initializing = 0;
-	return 0;
-}
-
-static void __devexit ali_remove(struct pci_dev *pci_dev)
-{
-	int i;
-	struct ali_card *card = pci_get_drvdata(pci_dev);
-	/* free hardware resources */
-	free_irq(card->irq, devs);
-	release_region(card->iobase, 256);
-	/* unregister audio devices */
-	for (i = 0; i < NR_AC97; i++)
-		if (card->ac97_codec[i] != NULL) {
-			unregister_sound_mixer(card->ac97_codec[i]->
-					       dev_mixer);
-			ac97_release_codec(card->ac97_codec[i]);
-			card->ac97_codec[i] = NULL;
-		}
-	unregister_sound_dsp(card->dev_audio);
-	kfree(card);
-}
-
-#ifdef CONFIG_PM
-static int ali_pm_suspend(struct pci_dev *dev, pm_message_t pm_state)
-{
-	struct ali_card *card = pci_get_drvdata(dev);
-	struct ali_state *state;
-	unsigned long flags;
-	struct dmabuf *dmabuf;
-	int i, num_ac97;
-
-	if (!card)
-		return 0;
-	spin_lock_irqsave(&card->lock, flags);
-	card->pm_suspended = 1;
-	for (i = 0; i < NR_HW_CH; i++) {
-		state = card->states[i];
-		if (!state)
-			continue;
-		/* this happens only if there are open files */
-		dmabuf = &state->dmabuf;
-		if (dmabuf->enable & DAC_RUNNING ||
-		    (dmabuf->count
-		     && (dmabuf->trigger & PCM_ENABLE_OUTPUT))) {
-			state->pm_saved_dac_rate = dmabuf->rate;
-			stop_dac(state);
-		} else {
-			state->pm_saved_dac_rate = 0;
-		}
-		if (dmabuf->enable & ADC_RUNNING) {
-			state->pm_saved_adc_rate = dmabuf->rate;
-			stop_adc(state);
-		} else {
-			state->pm_saved_adc_rate = 0;
-		}
-		dmabuf->ready = 0;
-		dmabuf->swptr = dmabuf->hwptr = 0;
-		dmabuf->count = dmabuf->total_bytes = 0;
-	}
-
-	spin_unlock_irqrestore(&card->lock, flags);
-	/* save mixer settings */
-	for (num_ac97 = 0; num_ac97 < NR_AC97; num_ac97++) {
-		struct ac97_codec *codec = card->ac97_codec[num_ac97];
-		if (!codec)
-			continue;
-		for (i = 0; i < SOUND_MIXER_NRDEVICES; i++) {
-			if ((supported_mixer(codec, i)) && (codec->read_mixer)) {
-				card->pm_saved_mixer_settings[i][num_ac97] = codec->read_mixer(codec, i);
-			}
-		}
-	}
-	pci_save_state(dev);	/* XXX do we need this? */
-	pci_disable_device(dev);	/* disable busmastering */
-	pci_set_power_state(dev, 3);	/* Zzz. */
-	return 0;
-}
-
-
-static int ali_pm_resume(struct pci_dev *dev)
-{
-	int num_ac97, i = 0;
-	struct ali_card *card = pci_get_drvdata(dev);
-	pci_enable_device(dev);
-	pci_restore_state(dev);
-	/* observation of a toshiba portege 3440ct suggests that the 
-	   hardware has to be more or less completely reinitialized from
-	   scratch after an apm suspend.  Works For Me.   -dan */
-	ali_ac97_random_init_stuff(card);
-	for (num_ac97 = 0; num_ac97 < NR_AC97; num_ac97++) {
-		struct ac97_codec *codec = card->ac97_codec[num_ac97];
-		/* check they haven't stolen the hardware while we were
-		   away */
-		if (!codec || !ali_ac97_exists(card, num_ac97)) {
-			if (num_ac97)
-				continue;
-			else
-				BUG();
-		}
-		if (!ali_ac97_probe_and_powerup(card, codec))
-			BUG();
-		if ((card->ac97_features & 0x0001)) {
-			/* at probe time we found we could do variable
-			   rates, but APM suspend has made it forget
-			   its magical powers */
-			if (!ali_ac97_enable_variable_rate(codec))
-				BUG();
-		}
-		/* we lost our mixer settings, so restore them */
-		for (i = 0; i < SOUND_MIXER_NRDEVICES; i++) {
-			if (supported_mixer(codec, i)) {
-				int val = card->pm_saved_mixer_settings[i][num_ac97];
-				codec->mixer_state[i] = val;
-				codec->write_mixer(codec, i,
-						   (val & 0xff),
-						   ((val >> 8) & 0xff));
-			}
-		}
-	}
-
-	/* we need to restore the sample rate from whatever it was */
-	for (i = 0; i < NR_HW_CH; i++) {
-		struct ali_state *state = card->states[i];
-		if (state) {
-			if (state->pm_saved_adc_rate)
-				ali_set_adc_rate(state, state->pm_saved_adc_rate);
-			if (state->pm_saved_dac_rate)
-				ali_set_dac_rate(state, state->pm_saved_dac_rate);
-		}
-	}
-
-	card->pm_suspended = 0;
-	/* any processes that were reading/writing during the suspend
-	   probably ended up here */
-	for (i = 0; i < NR_HW_CH; i++) {
-		struct ali_state *state = card->states[i];
-		if (state)
-			wake_up(&state->dmabuf.wait);
-	}
-	return 0;
-}
-#endif				/* CONFIG_PM */
-
-MODULE_AUTHOR("");
-MODULE_DESCRIPTION("ALI 5455 audio support");
-MODULE_LICENSE("GPL");
-module_param(clocking, int, 0);
-/* FIXME: bool? */
-module_param(strict_clocking, uint, 0);
-module_param(codec_pcmout_share_spdif_locked, uint, 0);
-module_param(codec_independent_spdif_locked, uint, 0);
-module_param(controller_pcmout_share_spdif_locked, uint, 0);
-module_param(controller_independent_spdif_locked, uint, 0);
-#define ALI5455_MODULE_NAME "ali5455"
-static struct pci_driver ali_pci_driver = {
-	.name		= ALI5455_MODULE_NAME,
-	.id_table	= ali_pci_tbl,
-	.probe		= ali_probe,
-	.remove		= __devexit_p(ali_remove),
-#ifdef CONFIG_PM
-	.suspend	= ali_pm_suspend,
-	.resume		= ali_pm_resume,
-#endif				/* CONFIG_PM */
-};
-
-static int __init ali_init_module(void)
-{
-	printk(KERN_INFO "ALI 5455 + AC97 Audio, version "
-	       DRIVER_VERSION ", " __TIME__ " " __DATE__ "\n");
-
-	if (codec_independent_spdif_locked > 0) {
-		if (codec_independent_spdif_locked == 32000
-		    || codec_independent_spdif_locked == 44100
-		    || codec_independent_spdif_locked == 48000) {
-			printk(KERN_INFO "ali_audio: Enabling S/PDIF at sample rate %dHz.\n", codec_independent_spdif_locked);
-		} else {
-			printk(KERN_INFO "ali_audio: S/PDIF can only be locked to 32000, 44100, or 48000Hz.\n");
-			codec_independent_spdif_locked = 0;
-		}
-	}
-	if (controller_independent_spdif_locked > 0) {
-		if (controller_independent_spdif_locked == 32000
-		    || controller_independent_spdif_locked == 44100
-		    || controller_independent_spdif_locked == 48000) {
-			printk(KERN_INFO "ali_audio: Enabling S/PDIF at sample rate %dHz.\n", controller_independent_spdif_locked);
-		} else {
-			printk(KERN_INFO "ali_audio: S/PDIF can only be locked to 32000, 44100, or 48000Hz.\n");
-			controller_independent_spdif_locked = 0;
-		}
-	}
-
-	if (codec_pcmout_share_spdif_locked > 0) {
-		if (codec_pcmout_share_spdif_locked == 32000
-		    || codec_pcmout_share_spdif_locked == 44100
-		    || codec_pcmout_share_spdif_locked == 48000) {
-			printk(KERN_INFO "ali_audio: Enabling S/PDIF at sample rate %dHz.\n", codec_pcmout_share_spdif_locked);
-		} else {
-			printk(KERN_INFO "ali_audio: S/PDIF can only be locked to 32000, 44100, or 48000Hz.\n");
-			codec_pcmout_share_spdif_locked = 0;
-		}
-	}
-	if (controller_pcmout_share_spdif_locked > 0) {
-		if (controller_pcmout_share_spdif_locked == 32000
-		    || controller_pcmout_share_spdif_locked == 44100
-		    || controller_pcmout_share_spdif_locked == 48000) {
-			printk(KERN_INFO "ali_audio: Enabling controller S/PDIF at sample rate %dHz.\n", controller_pcmout_share_spdif_locked);
-		} else {
-			printk(KERN_INFO "ali_audio: S/PDIF can only be locked to 32000, 44100, or 48000Hz.\n");
-			controller_pcmout_share_spdif_locked = 0;
-		}
-	}
-	return pci_register_driver(&ali_pci_driver);
-}
-
-static void __exit ali_cleanup_module(void)
-{
-	pci_unregister_driver(&ali_pci_driver);
-}
-
-module_init(ali_init_module);
-module_exit(ali_cleanup_module);
-/*
-Local Variables:
-c-basic-offset: 8
-End:
-*/