Annotate hardware config module parameters in sound/oss/

When the kernel is running in secure boot mode, we lock down the kernel to
prevent userspace from modifying the running kernel image.  Whilst this
includes prohibiting access to things like /dev/mem, it must also prevent
access by means of configuring driver modules in such a way as to cause a
device to access or modify the kernel image.

To this end, annotate module_param* statements that refer to hardware
configuration and indicate for future reference what type of parameter they
specify.  The parameter parser in the core sees this information and can
skip such parameters with an error message if the kernel is locked down.
The module initialisation then runs as normal, but just sees whatever the
default values for those parameters is.

Note that we do still need to do the module initialisation because some
drivers have viable defaults set in case parameters aren't specified and
some drivers support automatic configuration (e.g. PNP or PCI) in addition
to manually coded parameters.

This patch annotates drivers in sound/oss/.

Suggested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jaroslav Kysela <perex@perex.cz>
cc: Takashi Iwai <tiwai@suse.com>
cc: Andrew Veliath <andrewtv@usa.net>
cc: alsa-devel@alsa-project.org

1 files changed, 7 insertions, 7 deletions

diff --git a/sound/oss/pss.c b/sound/oss/pss.c
index 81314f9e2ccb..33c3a442e162 100644
--- a/sound/oss/pss.c
+++ b/sound/oss/pss.c
@@ -1139,19 +1139,19 @@ static bool pss_no_sound = 0;	/* Just configure non-sound components */
 static bool pss_keep_settings  = 1;	/* Keep hardware settings at module exit */
 static char *pss_firmware = "/etc/sound/pss_synth";
 
-module_param(pss_io, int, 0);
+module_param_hw(pss_io, int, ioport, 0);
 MODULE_PARM_DESC(pss_io, "Set i/o base of PSS card (probably 0x220 or 0x240)");
-module_param(mss_io, int, 0);
+module_param_hw(mss_io, int, ioport, 0);
 MODULE_PARM_DESC(mss_io, "Set WSS (audio) i/o base (0x530, 0x604, 0xE80, 0xF40, or other. Address must end in 0 or 4 and must be from 0x100 to 0xFF4)");
-module_param(mss_irq, int, 0);
+module_param_hw(mss_irq, int, irq, 0);
 MODULE_PARM_DESC(mss_irq, "Set WSS (audio) IRQ (3, 5, 7, 9, 10, 11, 12)");
-module_param(mss_dma, int, 0);
+module_param_hw(mss_dma, int, dma, 0);
 MODULE_PARM_DESC(mss_dma, "Set WSS (audio) DMA (0, 1, 3)");
-module_param(mpu_io, int, 0);
+module_param_hw(mpu_io, int, ioport, 0);
 MODULE_PARM_DESC(mpu_io, "Set MIDI i/o base (0x330 or other. Address must be on 4 location boundaries and must be from 0x100 to 0xFFC)");
-module_param(mpu_irq, int, 0);
+module_param_hw(mpu_irq, int, irq, 0);
 MODULE_PARM_DESC(mpu_irq, "Set MIDI IRQ (3, 5, 7, 9, 10, 11, 12)");
-module_param(pss_cdrom_port, int, 0);
+module_param_hw(pss_cdrom_port, int, ioport, 0);
 MODULE_PARM_DESC(pss_cdrom_port, "Set the PSS CDROM port i/o base (0x340 or other)");
 module_param(pss_enable_joystick, bool, 0);
 MODULE_PARM_DESC(pss_enable_joystick, "Enables the PSS joystick port (1 to enable, 0 to disable)");