ASoC: multi-component - ASoC Multi-Component Support

This patch extends the ASoC API to allow sound cards to have more than one
CODEC and more than one platform DMA controller. This is achieved by dividing
some current ASoC structures that contain both driver data and device data into
structures that only either contain device data or driver data. i.e.

 struct snd_soc_codec    --->  struct snd_soc_codec (device data)
                          +->  struct snd_soc_codec_driver (driver data)

 struct snd_soc_platform --->  struct snd_soc_platform (device data)
                          +->  struct snd_soc_platform_driver (driver data)

 struct snd_soc_dai      --->  struct snd_soc_dai (device data)
                          +->  struct snd_soc_dai_driver (driver data)

 struct snd_soc_device   --->  deleted

This now allows ASoC to be more tightly aligned with the Linux driver model and
also means that every ASoC codec, platform and (platform) DAI is a kernel
device. ASoC component private data is now stored as device private data.

The ASoC sound card struct snd_soc_card has also been updated to store lists
of it's components rather than a pointer to a codec and platform. The PCM
runtime struct soc_pcm_runtime now has pointers to all its components.

This patch adds DAPM support for ASoC multi-component and removes struct
snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec
or runtime PCM level basis rather than using snd_soc_socdev.

Other notable multi-component changes:-

 * Stream operations now de-reference less structures.
 * close_delayed work() now runs on a DAI basis rather than looping all DAIs
   in a card.
 * PM suspend()/resume() operations can now handle N CODECs and Platforms
   per sound card.
 * Added soc_bind_dai_link() to bind the component devices to the sound card.
 * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove
   DAI link components.
 * sysfs entries can now be registered per component per card.
 * snd_soc_new_pcms() functionailty rolled into dai_link_probe().
 * snd_soc_register_codec() now does all the codec list and mutex init.

This patch changes the probe() and remove() of the CODEC drivers as follows:-

 o Make CODEC driver a platform driver
 o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core.
 o Removed all static codec pointers (drivers now support > 1 codec dev)
 o snd_soc_register_pcms() now done by core.
 o snd_soc_register_dai() folded into snd_soc_register_codec().

CS4270 portions:
Acked-by: Timur Tabi <timur@freescale.com>

Some TLV320aic23 and Cirrus platform fixes.
Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>

TI CODEC and OMAP fixes
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>

Samsung platform and misc fixes :-
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Seungwhan Youn <sw.youn@samsung.com>

MPC8610 and PPC fixes.
Signed-off-by: Timur Tabi <timur@freescale.com>

i.MX fixes and some core fixes.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

J4740 platform fixes:-
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>

CC: Tony Lindgren <tony@atomide.com>
CC: Nicolas Ferre <nicolas.ferre@atmel.com>
CC: Kevin Hilman <khilman@deeprootsystems.com>
CC: Sascha Hauer <s.hauer@pengutronix.de>
CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
CC: Kuninori Morimoto <morimoto.kuninori@renesas.com>
CC: Daniel Gloeckner <dg@emlix.com>
CC: Manuel Lauss <mano@roarinelk.homelinux.net>
CC: Mike Frysinger <vapier.adi@gmail.com>
CC: Arnaud Patard <apatard@mandriva.com>
CC: Wan ZongShun <mcuos.com@gmail.com>

Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

1 files changed, 138 insertions, 255 deletions

diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c
index 30d949239def..6542dc038951 100644
--- a/sound/soc/codecs/cs4270.c
+++ b/sound/soc/codecs/cs4270.c
@@ -31,8 +31,6 @@
 #include <linux/delay.h>
 #include <linux/regulator/consumer.h>
 
-#include "cs4270.h"
-
 /*
  * The codec isn't really big-endian or little-endian, since the I2S
  * interface requires data to be sent serially with the MSbit first.
@@ -114,7 +112,8 @@ static const char *supply_names[] = {
 
 /* Private data for the CS4270 */
 struct cs4270_private {
-	struct snd_soc_codec codec;
+	enum snd_soc_control_type control_type;
+	void *control_data;
 	u8 reg_cache[CS4270_NUMREGS];
 	unsigned int mclk; /* Input frequency of the MCLK pin */
 	unsigned int mode; /* The mode (I2S or left-justified) */
@@ -212,44 +211,8 @@ static int cs4270_set_dai_sysclk(struct snd_soc_dai *codec_dai,
 {
 	struct snd_soc_codec *codec = codec_dai->codec;
 	struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec);
-	unsigned int rates = 0;
-	unsigned int rate_min = -1;
-	unsigned int rate_max = 0;
-	unsigned int i;
 
 	cs4270->mclk = freq;
-
-	if (cs4270->mclk) {
-		for (i = 0; i < NUM_MCLK_RATIOS; i++) {
-			unsigned int rate = freq / cs4270_mode_ratios[i].ratio;
-			rates |= snd_pcm_rate_to_rate_bit(rate);
-			if (rate < rate_min)
-				rate_min = rate;
-			if (rate > rate_max)
-				rate_max = rate;
-		}
-		/* FIXME: soc should support a rate list */
-		rates &= ~SNDRV_PCM_RATE_KNOT;
-
-		if (!rates) {
-			dev_err(codec->dev, "could not find a valid sample rate\n");
-			return -EINVAL;
-		}
-	} else {
-		/* enable all possible rates */
-		rates = SNDRV_PCM_RATE_8000_192000;
-		rate_min = 8000;
-		rate_max = 192000;
-	}
-
-	codec_dai->playback.rates = rates;
-	codec_dai->playback.rate_min = rate_min;
-	codec_dai->playback.rate_max = rate_max;
-
-	codec_dai->capture.rates = rates;
-	codec_dai->capture.rate_min = rate_min;
-	codec_dai->capture.rate_max = rate_max;
-
 	return 0;
 }
 
@@ -410,8 +373,7 @@ static int cs4270_hw_params(struct snd_pcm_substream *substream,
 			    struct snd_soc_dai *dai)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_device *socdev = rtd->socdev;
-	struct snd_soc_codec *codec = socdev->card->codec;
+	struct snd_soc_codec *codec = rtd->codec;
 	struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec);
 	int ret;
 	unsigned int i;
@@ -549,19 +511,6 @@ static const struct snd_kcontrol_new cs4270_snd_controls[] = {
 		snd_soc_get_volsw, cs4270_soc_put_mute),
 };
 
-/*
- * cs4270_codec - global variable to store codec for the ASoC probe function
- *
- * If struct i2c_driver had a private_data field, we wouldn't need to use
- * cs4270_codec.  This is the only way to pass the codec structure from
- * cs4270_i2c_probe() to cs4270_probe().  Unfortunately, there is no good
- * way to synchronize these two functions.  cs4270_i2c_probe() can be called
- * multiple times before cs4270_probe() is called even once.  So for now, we
- * also only allow cs4270_i2c_probe() to be run once.  That means that we do
- * not support more than one cs4270 device in the system, at least for now.
- */
-static struct snd_soc_codec *cs4270_codec;
-
 static struct snd_soc_dai_ops cs4270_dai_ops = {
 	.hw_params	= cs4270_hw_params,
 	.set_sysclk	= cs4270_set_dai_sysclk,
@@ -569,20 +518,24 @@ static struct snd_soc_dai_ops cs4270_dai_ops = {
 	.digital_mute	= cs4270_dai_mute,
 };
 
-struct snd_soc_dai cs4270_dai = {
-	.name = "cs4270",
+struct snd_soc_dai_driver cs4270_dai = {
+	.name = "cs4270-hifi",
 	.playback = {
 		.stream_name = "Playback",
 		.channels_min = 1,
 		.channels_max = 2,
-		.rates = 0,
+		.rates = SNDRV_PCM_RATE_CONTINUOUS,
+		.rate_min = 4000,
+		.rate_max = 216000,
 		.formats = CS4270_FORMATS,
 	},
 	.capture = {
 		.stream_name = "Capture",
 		.channels_min = 1,
 		.channels_max = 2,
-		.rates = 0,
+		.rates = SNDRV_PCM_RATE_CONTINUOUS,
+		.rate_min = 4000,
+		.rate_max = 216000,
 		.formats = CS4270_FORMATS,
 	},
 	.ops = &cs4270_dai_ops,
@@ -596,153 +549,19 @@ EXPORT_SYMBOL_GPL(cs4270_dai);
  * This function is called when ASoC has all the pieces it needs to
  * instantiate a sound driver.
  */
-static int cs4270_probe(struct platform_device *pdev)
-{
-	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
-	struct snd_soc_codec *codec = cs4270_codec;
-	struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec);
-	int i, ret;
-
-	/* Connect the codec to the socdev.  snd_soc_new_pcms() needs this. */
-	socdev->card->codec = codec;
-
-	/* Register PCMs */
-	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
-	if (ret < 0) {
-		dev_err(codec->dev, "failed to create pcms\n");
-		return ret;
-	}
-
-	/* Add the non-DAPM controls */
-	ret = snd_soc_add_controls(codec, cs4270_snd_controls,
-				ARRAY_SIZE(cs4270_snd_controls));
-	if (ret < 0) {
-		dev_err(codec->dev, "failed to add controls\n");
-		goto error_free_pcms;
-	}
-
-	/* get the power supply regulators */
-	for (i = 0; i < ARRAY_SIZE(supply_names); i++)
-		cs4270->supplies[i].supply = supply_names[i];
-
-	ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(cs4270->supplies),
-				 cs4270->supplies);
-	if (ret < 0)
-		goto error_free_pcms;
-
-	ret = regulator_bulk_enable(ARRAY_SIZE(cs4270->supplies),
-				    cs4270->supplies);
-	if (ret < 0)
-		goto error_free_regulators;
-
-	return 0;
-
-error_free_regulators:
-	regulator_bulk_free(ARRAY_SIZE(cs4270->supplies),
-			    cs4270->supplies);
-
-error_free_pcms:
-	snd_soc_free_pcms(socdev);
-
-	return ret;
-}
-
-/**
- * cs4270_remove - ASoC remove function
- * @pdev: platform device
- *
- * This function is the counterpart to cs4270_probe().
- */
-static int cs4270_remove(struct platform_device *pdev)
+static int cs4270_probe(struct snd_soc_codec *codec)
 {
-	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
-	struct snd_soc_codec *codec = cs4270_codec;
 	struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec);
+	int i, ret, reg;
 
-	snd_soc_free_pcms(socdev);
-	regulator_bulk_disable(ARRAY_SIZE(cs4270->supplies), cs4270->supplies);
-	regulator_bulk_free(ARRAY_SIZE(cs4270->supplies), cs4270->supplies);
-
-	return 0;
-};
-
-/**
- * cs4270_i2c_probe - initialize the I2C interface of the CS4270
- * @i2c_client: the I2C client object
- * @id: the I2C device ID (ignored)
- *
- * This function is called whenever the I2C subsystem finds a device that
- * matches the device ID given via a prior call to i2c_add_driver().
- */
-static int cs4270_i2c_probe(struct i2c_client *i2c_client,
-	const struct i2c_device_id *id)
-{
-	struct snd_soc_codec *codec;
-	struct cs4270_private *cs4270;
-	unsigned int reg;
-	int ret;
-
-	/* For now, we only support one cs4270 device in the system.  See the
-	 * comment for cs4270_codec.
-	 */
-	if (cs4270_codec) {
-		dev_err(&i2c_client->dev, "ignoring CS4270 at addr %X\n",
-		       i2c_client->addr);
-		dev_err(&i2c_client->dev, "only one per board allowed\n");
-		/* Should we return something other than ENODEV here? */
-		return -ENODEV;
-	}
-
-	/* Verify that we have a CS4270 */
-
-	ret = i2c_smbus_read_byte_data(i2c_client, CS4270_CHIPID);
-	if (ret < 0) {
-		dev_err(&i2c_client->dev, "failed to read i2c at addr %X\n",
-		       i2c_client->addr);
-		return ret;
-	}
-	/* The top four bits of the chip ID should be 1100. */
-	if ((ret & 0xF0) != 0xC0) {
-		dev_err(&i2c_client->dev, "device at addr %X is not a CS4270\n",
-		       i2c_client->addr);
-		return -ENODEV;
-	}
-
-	dev_info(&i2c_client->dev, "found device at i2c address %X\n",
-		i2c_client->addr);
-	dev_info(&i2c_client->dev, "hardware revision %X\n", ret & 0xF);
-
-	/* Allocate enough space for the snd_soc_codec structure
-	   and our private data together. */
-	cs4270 = kzalloc(sizeof(struct cs4270_private), GFP_KERNEL);
-	if (!cs4270) {
-		dev_err(&i2c_client->dev, "could not allocate codec\n");
-		return -ENOMEM;
-	}
-	codec = &cs4270->codec;
-
-	mutex_init(&codec->mutex);
-	INIT_LIST_HEAD(&codec->dapm_widgets);
-	INIT_LIST_HEAD(&codec->dapm_paths);
-
-	codec->dev = &i2c_client->dev;
-	codec->name = "CS4270";
-	codec->owner = THIS_MODULE;
-	codec->dai = &cs4270_dai;
-	codec->num_dai = 1;
-	snd_soc_codec_set_drvdata(codec, cs4270);
-	codec->control_data = i2c_client;
-	codec->read = cs4270_read_reg_cache;
-	codec->write = cs4270_i2c_write;
-	codec->reg_cache = cs4270->reg_cache;
-	codec->reg_cache_size = CS4270_NUMREGS;
+	codec->control_data = cs4270->control_data;
 
 	/* The I2C interface is set up, so pre-fill our register cache */
 
 	ret = cs4270_fill_cache(codec);
 	if (ret < 0) {
-		dev_err(&i2c_client->dev, "failed to fill register cache\n");
-		goto error_free_codec;
+		dev_err(codec->dev, "failed to fill register cache\n");
+		return ret;
 	}
 
 	/* Disable auto-mute.  This feature appears to be buggy.  In some
@@ -755,7 +574,7 @@ static int cs4270_i2c_probe(struct i2c_client *i2c_client,
 	reg &= ~CS4270_MUTE_AUTO;
 	ret = cs4270_i2c_write(codec, CS4270_MUTE, reg);
 	if (ret < 0) {
-		dev_err(&i2c_client->dev, "i2c write failed\n");
+		dev_err(codec->dev, "i2c write failed\n");
 		return ret;
 	}
 
@@ -769,65 +588,56 @@ static int cs4270_i2c_probe(struct i2c_client *i2c_client,
 	reg &= ~(CS4270_TRANS_SOFT | CS4270_TRANS_ZERO);
 	ret = cs4270_i2c_write(codec, CS4270_TRANS, reg);
 	if (ret < 0) {
-		dev_err(&i2c_client->dev, "i2c write failed\n");
+		dev_err(codec->dev, "i2c write failed\n");
 		return ret;
 	}
 
-	/* Initialize the DAI. Normally, we'd prefer to have a kmalloc'd DAI
-	 * structure for each CS4270 device, but the machine driver needs to
-	 * have a pointer to the DAI structure, so for now it must be a global
-	 * variable.
-	 */
-	cs4270_dai.dev = &i2c_client->dev;
-
-	/* Register the DAI.  If all the other ASoC driver have already
-	 * registered, then this will call our probe function, so
-	 * cs4270_codec needs to be ready.
-	 */
-	cs4270_codec = codec;
-	ret = snd_soc_register_dai(&cs4270_dai);
+	/* Add the non-DAPM controls */
+	ret = snd_soc_add_controls(codec, cs4270_snd_controls,
+				ARRAY_SIZE(cs4270_snd_controls));
 	if (ret < 0) {
-		dev_err(&i2c_client->dev, "failed to register DAIe\n");
-		goto error_free_codec;
+		dev_err(codec->dev, "failed to add controls\n");
+		return ret;
 	}
 
-	i2c_set_clientdata(i2c_client, cs4270);
+	/* get the power supply regulators */
+	for (i = 0; i < ARRAY_SIZE(supply_names); i++)
+		cs4270->supplies[i].supply = supply_names[i];
+
+	ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(cs4270->supplies),
+				 cs4270->supplies);
+	if (ret < 0)
+		return ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(cs4270->supplies),
+				    cs4270->supplies);
+	if (ret < 0)
+		goto error_free_regulators;
 
 	return 0;
 
-error_free_codec:
-	kfree(cs4270);
-	cs4270_codec = NULL;
-	cs4270_dai.dev = NULL;
+error_free_regulators:
+	regulator_bulk_free(ARRAY_SIZE(cs4270->supplies),
+			    cs4270->supplies);
 
 	return ret;
 }
 
 /**
- * cs4270_i2c_remove - remove an I2C device
- * @i2c_client: the I2C client object
+ * cs4270_remove - ASoC remove function
+ * @pdev: platform device
  *
- * This function is the counterpart to cs4270_i2c_probe().
+ * This function is the counterpart to cs4270_probe().
  */
-static int cs4270_i2c_remove(struct i2c_client *i2c_client)
+static int cs4270_remove(struct snd_soc_codec *codec)
 {
-	struct cs4270_private *cs4270 = i2c_get_clientdata(i2c_client);
+	struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec);
 
-	kfree(cs4270);
-	cs4270_codec = NULL;
-	cs4270_dai.dev = NULL;
+	regulator_bulk_disable(ARRAY_SIZE(cs4270->supplies), cs4270->supplies);
+	regulator_bulk_free(ARRAY_SIZE(cs4270->supplies), cs4270->supplies);
 
 	return 0;
-}
-
-/*
- * cs4270_id - I2C device IDs supported by this driver
- */
-static struct i2c_device_id cs4270_id[] = {
-	{"cs4270", 0},
-	{}
 };
-MODULE_DEVICE_TABLE(i2c, cs4270_id);
 
 #ifdef CONFIG_PM
 
@@ -840,9 +650,8 @@ MODULE_DEVICE_TABLE(i2c, cs4270_id);
  * and all registers are written back to the hardware when resuming.
  */
 
-static int cs4270_soc_suspend(struct platform_device *pdev, pm_message_t mesg)
+static int cs4270_soc_suspend(struct snd_soc_codec *codec, pm_message_t mesg)
 {
-	struct snd_soc_codec *codec = cs4270_codec;
 	struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec);
 	int reg, ret;
 
@@ -860,9 +669,8 @@ static int cs4270_soc_suspend(struct platform_device *pdev, pm_message_t mesg)
 	return 0;
 }
 
-static int cs4270_soc_resume(struct platform_device *pdev)
+static int cs4270_soc_resume(struct snd_soc_codec *codec)
 {
-	struct snd_soc_codec *codec = cs4270_codec;
 	struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec);
 	struct i2c_client *i2c_client = codec->control_data;
 	int reg;
@@ -896,6 +704,95 @@ static int cs4270_soc_resume(struct platform_device *pdev)
 #endif /* CONFIG_PM */
 
 /*
+ * ASoC codec device structure
+ *
+ * Assign this variable to the codec_dev field of the machine driver's
+ * snd_soc_device structure.
+ */
+static struct snd_soc_codec_driver soc_codec_device_cs4270 = {
+	.probe =	cs4270_probe,
+	.remove =	cs4270_remove,
+	.suspend =	cs4270_soc_suspend,
+	.resume =	cs4270_soc_resume,
+	.read = cs4270_read_reg_cache,
+	.write = cs4270_i2c_write,
+	.reg_cache_size = CS4270_NUMREGS,
+	.reg_word_size = sizeof(u8),
+};
+
+/**
+ * cs4270_i2c_probe - initialize the I2C interface of the CS4270
+ * @i2c_client: the I2C client object
+ * @id: the I2C device ID (ignored)
+ *
+ * This function is called whenever the I2C subsystem finds a device that
+ * matches the device ID given via a prior call to i2c_add_driver().
+ */
+static int cs4270_i2c_probe(struct i2c_client *i2c_client,
+	const struct i2c_device_id *id)
+{
+	struct cs4270_private *cs4270;
+	int ret;
+
+	/* Verify that we have a CS4270 */
+
+	ret = i2c_smbus_read_byte_data(i2c_client, CS4270_CHIPID);
+	if (ret < 0) {
+		dev_err(&i2c_client->dev, "failed to read i2c at addr %X\n",
+		       i2c_client->addr);
+		return ret;
+	}
+	/* The top four bits of the chip ID should be 1100. */
+	if ((ret & 0xF0) != 0xC0) {
+		dev_err(&i2c_client->dev, "device at addr %X is not a CS4270\n",
+		       i2c_client->addr);
+		return -ENODEV;
+	}
+
+	dev_info(&i2c_client->dev, "found device at i2c address %X\n",
+		i2c_client->addr);
+	dev_info(&i2c_client->dev, "hardware revision %X\n", ret & 0xF);
+
+	cs4270 = kzalloc(sizeof(struct cs4270_private), GFP_KERNEL);
+	if (!cs4270) {
+		dev_err(&i2c_client->dev, "could not allocate codec\n");
+		return -ENOMEM;
+	}
+
+	i2c_set_clientdata(i2c_client, cs4270);
+	cs4270->control_data = i2c_client;
+	cs4270->control_type = SND_SOC_I2C;
+
+	ret = snd_soc_register_codec(&i2c_client->dev,
+			&soc_codec_device_cs4270, &cs4270_dai, 1);
+	if (ret < 0)
+		kfree(cs4270);
+	return ret;
+}
+
+/**
+ * cs4270_i2c_remove - remove an I2C device
+ * @i2c_client: the I2C client object
+ *
+ * This function is the counterpart to cs4270_i2c_probe().
+ */
+static int cs4270_i2c_remove(struct i2c_client *i2c_client)
+{
+	snd_soc_unregister_codec(&i2c_client->dev);
+	kfree(i2c_get_clientdata(i2c_client));
+	return 0;
+}
+
+/*
+ * cs4270_id - I2C device IDs supported by this driver
+ */
+static struct i2c_device_id cs4270_id[] = {
+	{"cs4270", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, cs4270_id);
+
+/*
  * cs4270_i2c_driver - I2C device identification
  *
  * This structure tells the I2C subsystem how to identify and support a
@@ -903,7 +800,7 @@ static int cs4270_soc_resume(struct platform_device *pdev)
  */
 static struct i2c_driver cs4270_i2c_driver = {
 	.driver = {
-		.name = "cs4270",
+		.name = "cs4270-codec",
 		.owner = THIS_MODULE,
 	},
 	.id_table = cs4270_id,
@@ -911,20 +808,6 @@ static struct i2c_driver cs4270_i2c_driver = {
 	.remove = cs4270_i2c_remove,
 };
 
-/*
- * ASoC codec device structure
- *
- * Assign this variable to the codec_dev field of the machine driver's
- * snd_soc_device structure.
- */
-struct snd_soc_codec_device soc_codec_device_cs4270 = {
-	.probe = 	cs4270_probe,
-	.remove = 	cs4270_remove,
-	.suspend =	cs4270_soc_suspend,
-	.resume =	cs4270_soc_resume,
-};
-EXPORT_SYMBOL_GPL(soc_codec_device_cs4270);
-
 static int __init cs4270_init(void)
 {
 	pr_info("Cirrus Logic CS4270 ALSA SoC Codec Driver\n");