diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2015-06-25 17:15:18 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2015-06-25 17:15:18 -0700 |
commit | 4570a37169d4b44d316f40b2ccc681dc93fedc7b (patch) | |
tree | cafffb586c60dddfb04b8619fa1ae0e859600de7 /sound/soc/codecs/sgtl5000.c | |
parent | f7b08217c755e88a29b5bd53b4a1d10cd8b3c5f8 (diff) | |
parent | 60b93030b44a8c2cd015cebe5624fd7552ec67ec (diff) |
Merge tag 'sound-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It was a busy development cycle at this time, as you can see a wide
range of changes in diffstat. There are no big changes but many
refactoring and improvements. Here we go some highlights:
ALSA core:
- Procfs codes were cleaned up to use seq_file
- Procfs can be opt out via Kconfig (only for EXPERT)
- Two types of jack API were unified finally; now both kctl and input
jack devs are handled via a single function call.
HD-audio:
- Continued code restructuring for the future ASoC driver; now HDA
controller driver is split to a core helper module.
- Preliminary codes for Skylake audio support in HDA core.
- Proper i915 gfx power well management for SKL & co
- Enabled runtime PM as default for Intel HDMI/DP codecs
- Newer Tegra chip supports
- More quirks for Dell headsets, Alienware (with CA0132), etc.
- A couple of DRM ELD helper API functions
ASoC:
- Support for loading ASoC topology maps from firmware, intended to
be used to allow self-describing DSP firmware images to be built
which can map controls added by the DSP to userspace without the
kernel needing to know about individual DSP firmwares
- Lots of refactoring to avoid direct access to snd_soc_codec where
it's not needed supporting future refactoring
- Big refactoring, cleanup and enhancement for the Wolfson ADSP
driver
- Cleanup series for TI TAS2552 and R-CAR drivers
- Fixes and improvements on RT56xx codecs
- Support for TI TAS571x power amplifiers
- Support for Qualcomm APQ8016 and ZTE ZX296702 SoCs
- Support for x86 systems with RT5650 and Qualcomm Storm
- Support for Mediatek AFE (Audio Front End) unit
- Other various small fixes to ASoC codec drivers
Firewire:
- Enhanced to allow non-blocking streams to use timestamp
synchronization
- Improve support for DM1500 and BeBoBv3
Misc:
- Cleanup of old pci API functions over all PCI sound drivers
- Fix long-standing regression of the old powermac i2c setup"
* tag 'sound-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (533 commits)
ALSA: pcm: Fix pcm_class sysfs output
ALSA: hda-beep: Update authors dead email address
ASoC: wm_adsp: Move DSP Rate controls into the codec
ASoC: wm8995: Fix setting sysclk for WM8995_SYSCLK_MCLK2 case
ALSA: hda: provide default bus io ops extended hdac
ALSA: hda: add hda link cleanup routine
ALSA: hda: add hdac_ext stream creation and cleanup routines
ASoC: rsrc-card: remove unused ret
ALSA: HDAC: move SND_HDA_PREALLOC_SIZE to core
ASoC: mediatek: Add machine driver for rt5650 rt5676 codec
ASoC: mediatek: Add machine driver for MAX98090 codec
ASoC: mediatek: Add AFE platform driver
ASoC: rsnd: remove io from rsnd_mod
ASoC: rsnd: move rsnd_mod_is_working() to rsnd_io_is_working()
ASoC: rsnd: don't use rsnd_mod_to_io() on snd_kcontrol
ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_src_xxx()
ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_ssi_xxx()
ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_dma_xxx()
ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_get_adinr()
ASoC: rsnd: add common interrupt handler for SSI/SRC/DMA
...
Diffstat (limited to 'sound/soc/codecs/sgtl5000.c')
-rw-r--r-- | sound/soc/codecs/sgtl5000.c | 56 |
1 files changed, 47 insertions, 9 deletions
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 3593a1496056..e673f6ceb521 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -948,7 +948,7 @@ static int sgtl5000_set_bias_level(struct snd_soc_codec *codec, case SND_SOC_BIAS_PREPARE: break; case SND_SOC_BIAS_STANDBY: - if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) { + if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_OFF) { ret = regulator_bulk_enable( ARRAY_SIZE(sgtl5000->supplies), sgtl5000->supplies); @@ -979,7 +979,6 @@ static int sgtl5000_set_bias_level(struct snd_soc_codec *codec, break; } - codec->dapm.bias_level = level; return 0; } @@ -1092,6 +1091,19 @@ static bool sgtl5000_readable(struct device *dev, unsigned int reg) } /* + * This precalculated table contains all (vag_val * 100 / lo_calcntrl) results + * to select an appropriate lo_vol_* in SGTL5000_CHIP_LINE_OUT_VOL + * The calculatation was done for all possible register values which + * is the array index and the following formula: 10^((idx−15)/40) * 100 + */ +static const u8 vol_quot_table[] = { + 42, 45, 47, 50, 53, 56, 60, 63, + 67, 71, 75, 79, 84, 89, 94, 100, + 106, 112, 119, 126, 133, 141, 150, 158, + 168, 178, 188, 200, 211, 224, 237, 251 +}; + +/* * sgtl5000 has 3 internal power supplies: * 1. VAG, normally set to vdda/2 * 2. charge pump, set to different value @@ -1111,6 +1123,10 @@ static int sgtl5000_set_power_regs(struct snd_soc_codec *codec) u16 ana_pwr; u16 lreg_ctrl; int vag; + int lo_vag; + int vol_quot; + int lo_vol; + size_t i; struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec); vdda = regulator_get_voltage(sgtl5000->supplies[VDDA].consumer); @@ -1198,23 +1214,45 @@ static int sgtl5000_set_power_regs(struct snd_soc_codec *codec) SGTL5000_ANA_GND_MASK, vag << SGTL5000_ANA_GND_SHIFT); /* set line out VAG to vddio / 2, in range (0.8v, 1.675v) */ - vag = vddio / 2; - if (vag <= SGTL5000_LINE_OUT_GND_BASE) - vag = 0; - else if (vag >= SGTL5000_LINE_OUT_GND_BASE + + lo_vag = vddio / 2; + if (lo_vag <= SGTL5000_LINE_OUT_GND_BASE) + lo_vag = 0; + else if (lo_vag >= SGTL5000_LINE_OUT_GND_BASE + SGTL5000_LINE_OUT_GND_STP * SGTL5000_LINE_OUT_GND_MAX) - vag = SGTL5000_LINE_OUT_GND_MAX; + lo_vag = SGTL5000_LINE_OUT_GND_MAX; else - vag = (vag - SGTL5000_LINE_OUT_GND_BASE) / + lo_vag = (lo_vag - SGTL5000_LINE_OUT_GND_BASE) / SGTL5000_LINE_OUT_GND_STP; snd_soc_update_bits(codec, SGTL5000_CHIP_LINE_OUT_CTRL, SGTL5000_LINE_OUT_CURRENT_MASK | SGTL5000_LINE_OUT_GND_MASK, - vag << SGTL5000_LINE_OUT_GND_SHIFT | + lo_vag << SGTL5000_LINE_OUT_GND_SHIFT | SGTL5000_LINE_OUT_CURRENT_360u << SGTL5000_LINE_OUT_CURRENT_SHIFT); + /* + * Set lineout output level in range (0..31) + * the same value is used for right and left channel + * + * Searching for a suitable index solving this formula: + * idx = 40 * log10(vag_val / lo_cagcntrl) + 15 + */ + vol_quot = (vag * 100) / lo_vag; + lo_vol = 0; + for (i = 0; i < ARRAY_SIZE(vol_quot_table); i++) { + if (vol_quot >= vol_quot_table[i]) + lo_vol = i; + else + break; + } + + snd_soc_update_bits(codec, SGTL5000_CHIP_LINE_OUT_VOL, + SGTL5000_LINE_OUT_VOL_RIGHT_MASK | + SGTL5000_LINE_OUT_VOL_LEFT_MASK, + lo_vol << SGTL5000_LINE_OUT_VOL_RIGHT_SHIFT | + lo_vol << SGTL5000_LINE_OUT_VOL_LEFT_SHIFT); + return 0; } |