ASoC: neo1973_wm8753: Convert to table based setup

Use table based setup to register the controls and DAPM widgets and routes.
This on one hand makes the code a bit shorter and cleaner and on the other hand
the board level DAPM elements get registered in the card's DAPM context rather
than in the CODEC's DAPM context.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>

1 files changed, 24 insertions, 36 deletions

diff --git a/sound/soc/samsung/neo1973_wm8753.c b/sound/soc/samsung/neo1973_wm8753.c
index 0125d9d5fbe7..b0800337b79e 100644
--- a/sound/soc/samsung/neo1973_wm8753.c
+++ b/sound/soc/samsung/neo1973_wm8753.c
@@ -272,48 +272,29 @@ static const struct snd_kcontrol_new neo1973_wm8753_controls[] = {
 static int neo1973_wm8753_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct snd_soc_codec *codec = rtd->codec;
-	struct snd_soc_dapm_context *dapm = &codec->dapm;
-	int ret;
+	struct snd_soc_card *card = rtd->card;
 
 	/* set up NC codec pins */
-	snd_soc_dapm_nc_pin(dapm, "OUT3");
-	snd_soc_dapm_nc_pin(dapm, "OUT4");
-	snd_soc_dapm_nc_pin(dapm, "LINE1");
-	snd_soc_dapm_nc_pin(dapm, "LINE2");
-
-	/* Add neo1973 specific widgets */
-	ret = snd_soc_dapm_new_controls(dapm, neo1973_wm8753_dapm_widgets,
-			ARRAY_SIZE(neo1973_wm8753_dapm_widgets));
-	if (ret)
-		return ret;
-
-	/* add neo1973 specific controls */
-	ret = snd_soc_add_card_controls(rtd->card, neo1973_wm8753_controls,
-			ARRAY_SIZE(neo1973_wm8753_controls));
-	if (ret)
-		return ret;
-
-	/* set up neo1973 specific audio routes */
-	ret = snd_soc_dapm_add_routes(dapm, neo1973_wm8753_routes,
-			ARRAY_SIZE(neo1973_wm8753_routes));
-	if (ret)
-		return ret;
+	snd_soc_dapm_nc_pin(&codec->dapm, "OUT3");
+	snd_soc_dapm_nc_pin(&codec->dapm, "OUT4");
+	snd_soc_dapm_nc_pin(&codec->dapm, "LINE1");
+	snd_soc_dapm_nc_pin(&codec->dapm, "LINE2");
 
 	/* set endpoints to default off mode */
-	snd_soc_dapm_disable_pin(dapm, "GSM Line Out");
-	snd_soc_dapm_disable_pin(dapm, "GSM Line In");
-	snd_soc_dapm_disable_pin(dapm, "Headset Mic");
-	snd_soc_dapm_disable_pin(dapm, "Handset Mic");
-	snd_soc_dapm_disable_pin(dapm, "Stereo Out");
-	snd_soc_dapm_disable_pin(dapm, "Handset Spk");
+	snd_soc_dapm_disable_pin(&card->dapm, "GSM Line Out");
+	snd_soc_dapm_disable_pin(&card->dapm, "GSM Line In");
+	snd_soc_dapm_disable_pin(&card->dapm, "Headset Mic");
+	snd_soc_dapm_disable_pin(&card->dapm, "Handset Mic");
+	snd_soc_dapm_disable_pin(&card->dapm, "Stereo Out");
+	snd_soc_dapm_disable_pin(&card->dapm, "Handset Spk");
 
 	/* allow audio paths from the GSM modem to run during suspend */
-	snd_soc_dapm_ignore_suspend(dapm, "GSM Line Out");
-	snd_soc_dapm_ignore_suspend(dapm, "GSM Line In");
-	snd_soc_dapm_ignore_suspend(dapm, "Headset Mic");
-	snd_soc_dapm_ignore_suspend(dapm, "Handset Mic");
-	snd_soc_dapm_ignore_suspend(dapm, "Stereo Out");
-	snd_soc_dapm_ignore_suspend(dapm, "Handset Spk");
+	snd_soc_dapm_ignore_suspend(&card->dapm, "GSM Line Out");
+	snd_soc_dapm_ignore_suspend(&card->dapm, "GSM Line In");
+	snd_soc_dapm_ignore_suspend(&card->dapm, "Headset Mic");
+	snd_soc_dapm_ignore_suspend(&card->dapm, "Handset Mic");
+	snd_soc_dapm_ignore_suspend(&card->dapm, "Stereo Out");
+	snd_soc_dapm_ignore_suspend(&card->dapm, "Handset Spk");
 
 	return 0;
 }
@@ -367,6 +348,13 @@ static struct snd_soc_card neo1973 = {
 	.num_aux_devs = ARRAY_SIZE(neo1973_aux_devs),
 	.codec_conf = neo1973_codec_conf,
 	.num_configs = ARRAY_SIZE(neo1973_codec_conf),
+
+	.controls = neo1973_wm8753_controls,
+	.num_controls = ARRAY_SIZE(neo1973_wm8753_controls),
+	.dapm_widgets = neo1973_wm8753_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(neo1973_wm8753_dapm_widgets),
+	.dapm_routes = neo1973_wm8753_routes,
+	.num_dapm_routes = ARRAY_SIZE(neo1973_wm8753_routes),
 };
 
 static struct platform_device *neo1973_snd_device;