Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (49 commits)
  [ARM] idle: clean up pm_idle calling, obey hlt_counter
  [ARM] S3C: Fix gpio-config off-by-one bug
  [ARM] S3C64XX: add to_irq() support for EINT() GPIO
  [ARM] S3C64XX: clock.c: fix typo in usb-host clock ctrlbit
  [ARM] S3C64XX: fix HCLK gate defines
  [ARM] Update mach-types
  [ARM] wire up rt_tgsigqueueinfo and perf_counter_open
  OMAP2 clock/powerdomain: off by 1 error in loop timeout comparisons
  OMAP3 SDRC: set FIXEDDELAY when disabling SDRC DLL
  OMAP3: Add support for DPLL3 divisor values higher than 2
  OMAP3 SRAM: convert SRAM code to use macros rather than magic numbers
  OMAP3 SRAM: add more comments on the SRAM code
  OMAP3 clock/SDRC: program SDRC_MR register during SDRC clock change
  OMAP3 clock: add a short delay when lowering CORE clk rate
  OMAP3 clock: initialize SDRC timings at kernel start
  OMAP3 clock: remove wait for DPLL3 M2 clock to stabilize
  [ARM] Add old Feroceon support to compressed/head.S
  [ARM] 5559/1: Limit the stack unwinding caused by a kthread exit
  [ARM] 5558/1: Add extra checks to ARM unwinder to avoid tracing corrupt stacks
  [ARM] 5557/1: Discard some ARM.ex*.*exit.text sections when !HOTPLUG or !HOTPLUG_CPU
  ...

2 files changed, 0 insertions, 72 deletions

diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c
index d5be2b30cda5..fefe1a57f31a 100644
--- a/sound/soc/pxa/corgi.c
+++ b/sound/soc/pxa/corgi.c
@@ -320,38 +320,6 @@ static struct snd_soc_device corgi_snd_devdata = {
 	.codec_dev = &soc_codec_dev_wm8731,
 };
 
-/*
- * FIXME: This is a temporary bodge to avoid cross-tree merge issues.
- * New drivers should register the wm8731 I2C device in the machine
- * setup code (under arch/arm for ARM systems).
- */
-static int wm8731_i2c_register(void)
-{
-	struct i2c_board_info info;
-	struct i2c_adapter *adapter;
-	struct i2c_client *client;
-
-	memset(&info, 0, sizeof(struct i2c_board_info));
-	info.addr = 0x1b;
-	strlcpy(info.type, "wm8731", I2C_NAME_SIZE);
-
-	adapter = i2c_get_adapter(0);
-	if (!adapter) {
-		printk(KERN_ERR "can't get i2c adapter 0\n");
-		return -ENODEV;
-	}
-
-	client = i2c_new_device(adapter, &info);
-	i2c_put_adapter(adapter);
-	if (!client) {
-		printk(KERN_ERR "can't add i2c device at 0x%x\n",
-			(unsigned int)info.addr);
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
 static struct platform_device *corgi_snd_device;
 
 static int __init corgi_init(void)
@@ -362,10 +330,6 @@ static int __init corgi_init(void)
 	      machine_is_husky()))
 		return -ENODEV;
 
-	ret = wm8731_i2c_register();
-	if (ret != 0)
-		return ret;
-
 	corgi_snd_device = platform_device_alloc("soc-audio", -1);
 	if (!corgi_snd_device)
 		return -ENOMEM;
diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c
index a51058f66747..c5f36e0eab58 100644
--- a/sound/soc/pxa/poodle.c
+++ b/sound/soc/pxa/poodle.c
@@ -280,38 +280,6 @@ static struct snd_soc_card snd_soc_poodle = {
 	.num_links = 1,
 };
 
-/*
- * FIXME: This is a temporary bodge to avoid cross-tree merge issues.
- * New drivers should register the wm8731 I2C device in the machine
- * setup code (under arch/arm for ARM systems).
- */
-static int wm8731_i2c_register(void)
-{
-	struct i2c_board_info info;
-	struct i2c_adapter *adapter;
-	struct i2c_client *client;
-
-	memset(&info, 0, sizeof(struct i2c_board_info));
-	info.addr = 0x1b;
-	strlcpy(info.type, "wm8731", I2C_NAME_SIZE);
-
-	adapter = i2c_get_adapter(0);
-	if (!adapter) {
-		printk(KERN_ERR "can't get i2c adapter 0\n");
-		return -ENODEV;
-	}
-
-	client = i2c_new_device(adapter, &info);
-	i2c_put_adapter(adapter);
-	if (!client) {
-		printk(KERN_ERR "can't add i2c device at 0x%x\n",
-			(unsigned int)info.addr);
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
 /* poodle audio subsystem */
 static struct snd_soc_device poodle_snd_devdata = {
 	.card = &snd_soc_poodle,
@@ -327,10 +295,6 @@ static int __init poodle_init(void)
 	if (!machine_is_poodle())
 		return -ENODEV;
 
-	ret = wm8731_i2c_register();
-	if (ret != 0)
-		return ret;
-
 	locomo_gpio_set_dir(&poodle_locomo_device.dev,
 		POODLE_LOCOMO_GPIO_AMP_ON, 0);
 	/* should we mute HP at startup - burning power ?*/