diff options
| author | Eric Nelson <eric.nelson@boundarydevices.com> | 2015-01-29 15:37:22 -0700 |
|---|---|---|
| committer | Max Krummenacher <max.krummenacher@toradex.com> | 2015-03-09 16:40:31 +0100 |
| commit | e7a905531c637477202665b3f64815844076b5f8 (patch) | |
| tree | d4bcbd6e512571d34e2eacf0943e55fcc2a7d9af /sound | |
| parent | 67d992559773f1029d8d49516ff642e56563eac4 (diff) | |
Revert "ASoC: sgtl5000: Fix driver probe after reset"
This reverts commit 3d64385594ab68f6818fac19e40e8a587790f8cf.
Pull from mainline was naive and requires additional precursor work.
(cherry picked from commit 74cfed78c018c768a6026aef0781b8429276efcc)
Diffstat (limited to 'sound')
| -rw-r--r-- | sound/soc/codecs/sgtl5000.c | 30 |
1 files changed, 0 insertions, 30 deletions
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index b4631b6b5d74..42db742ebe42 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -1468,31 +1468,6 @@ static s32 sgtl5000_write16(struct i2c_client *client, u16 reg, u16 val) return (ret < 0) ? ret : -EIO; } -/* - * Write all the default values from sgtl5000_reg_defaults[] array into the - * sgtl5000 registers, to make sure we always start with the sane registers - * values as stated in the datasheet. - * - * Since sgtl5000 does not have a reset line, nor a reset command in software, - * we follow this approach to guarantee we always start from the default values - * and avoid problems like, not being able to probe after an audio playback - * followed by a system reset or a 'reboot' command in Linux - */ -static int sgtl5000_fill_defaults(struct sgtl5000_priv *sgtl5000) -{ - int i, ret, val, index; - - for (i = 0; i < ARRAY_SIZE(sgtl5000_reg_defaults); i++) { - val = sgtl5000_reg_defaults[i].def; - index = sgtl5000_reg_defaults[i].reg; - ret = regmap_write(sgtl5000->regmap, index, val); - if (ret) - return ret; - } - - return 0; -} - static int sgtl5000_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -1544,11 +1519,6 @@ static int sgtl5000_i2c_probe(struct i2c_client *client, i2c_set_clientdata(client, sgtl5000); - /* Ensure sgtl5000 will start with sane register values */ - ret = sgtl5000_fill_defaults(sgtl5000); - if (ret) - return ret; - ret = snd_soc_register_codec(&client->dev, &sgtl5000_driver, &sgtl5000_dai, 1); if (ret) |