Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf changes from Ingo Molnar:
 "There are lots of improvements, the biggest changes are:

  Main kernel side changes:

   - Improve uprobes performance by adding 'pre-filtering' support, by
     Oleg Nesterov.

   - Make some POWER7 events available in sysfs, equivalent to what was
     done on x86, from Sukadev Bhattiprolu.

   - tracing updates by Steve Rostedt - mostly misc fixes and smaller
     improvements.

   - Use perf/event tracing to report PCI Express advanced errors, by
     Tony Luck.

   - Enable northbridge performance counters on AMD family 15h, by Jacob
     Shin.

   - This tracing commit:

        tracing: Remove the extra 4 bytes of padding in events

     changes the ABI.  All involved parties (PowerTop in particular)
     seem to agree that it's safe to do now with the introduction of
     libtraceevent, but the devil is in the details ...

  Main tooling side changes:

   - Add 'event group view', from Namyung Kim:

     To use it, 'perf record' should group events when recording.  And
     then perf report parses the saved group relation from file header
     and prints them together if --group option is provided.  You can
     use the 'perf evlist' command to see event group information:

        $ perf record -e '{ref-cycles,cycles}' noploop 1
        [ perf record: Woken up 2 times to write data ]
        [ perf record: Captured and wrote 0.385 MB perf.data (~16807 samples) ]

        $ perf evlist --group
        {ref-cycles,cycles}

     With this example, default perf report will show you each event
     separately.

     You can use --group option to enable event group view:

        $ perf report --group
        ...
        # group: {ref-cycles,cycles}
        # ========
        # Samples: 7K of event 'anon group { ref-cycles, cycles }'
        # Event count (approx.): 6876107743
        #
        #         Overhead  Command      Shared Object                      Symbol
        # ................  .......  .................  ..........................
            99.84%  99.76%  noploop  noploop            [.] main
             0.07%   0.00%  noploop  ld-2.15.so         [.] strcmp
             0.03%   0.00%  noploop  [kernel.kallsyms]  [k] timerqueue_del
             0.03%   0.03%  noploop  [kernel.kallsyms]  [k] sched_clock_cpu
             0.02%   0.00%  noploop  [kernel.kallsyms]  [k] account_user_time
             0.01%   0.00%  noploop  [kernel.kallsyms]  [k] __alloc_pages_nodemask
             0.00%   0.00%  noploop  [kernel.kallsyms]  [k] native_write_msr_safe
             0.00%   0.11%  noploop  [kernel.kallsyms]  [k] _raw_spin_lock
             0.00%   0.06%  noploop  [kernel.kallsyms]  [k] find_get_page
             0.00%   0.02%  noploop  [kernel.kallsyms]  [k] rcu_check_callbacks
             0.00%   0.02%  noploop  [kernel.kallsyms]  [k] __current_kernel_time

     As you can see the Overhead column now contains both of ref-cycles
     and cycles and header line shows group information also - 'anon
     group { ref-cycles, cycles }'.  The output is sorted by period of
     group leader first.

   - Initial GTK+ annotate browser, from Namhyung Kim.

   - Add option for runtime switching perf data file in perf report,
     just press 's' and a menu with the valid files found in the current
     directory will be presented, from Feng Tang.

   - Add support to display whole group data for raw columns, from Jiri
     Olsa.

   - Add per processor socket count aggregation in perf stat, from
     Stephane Eranian.

   - Add interval printing in 'perf stat', from Stephane Eranian.

   - 'perf test' improvements

   - Add support for wildcards in tracepoint system name, from Jiri
     Olsa.

   - Add anonymous huge page recognition, from Joshua Zhu.

   - perf build-id cache now can show DSOs present in a perf.data file
     that are not in the cache, to integrate with build-id servers being
     put in place by organizations such as Fedora.

   - perf top now shares more of the evsel config/creation routines with
     'record', paving the way for further integration like 'top'
     snapshots, etc.

   - perf top now supports DWARF callchains.

   - Fix mmap limitations on 32-bit, fix from David Miller.

   - 'perf bench numa mem' NUMA performance measurement suite

   - ... and lots of fixes, performance improvements, cleanups and other
     improvements I failed to list - see the shortlog and git log for
     details."

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (270 commits)
  perf/x86/amd: Enable northbridge performance counters on AMD family 15h
  perf/hwbp: Fix cleanup in case of kzalloc failure
  perf tools: Fix build with bison 2.3 and older.
  perf tools: Limit unwind support to x86 archs
  perf annotate: Make it to be able to skip unannotatable symbols
  perf gtk/annotate: Fail early if it can't annotate
  perf gtk/annotate: Show source lines with gray color
  perf gtk/annotate: Support multiple event annotation
  perf ui/gtk: Implement basic GTK2 annotation browser
  perf annotate: Fix warning message on a missing vmlinux
  perf buildid-cache: Add --update option
  uprobes/perf: Avoid uprobe_apply() whenever possible
  uprobes/perf: Teach trace_uprobe/perf code to use UPROBE_HANDLER_REMOVE
  uprobes/perf: Teach trace_uprobe/perf code to pre-filter
  uprobes/perf: Teach trace_uprobe/perf code to track the active perf_event's
  uprobes: Introduce uprobe_apply()
  perf: Introduce hw_perf_event->tp_target and ->tp_list
  uprobes/perf: Always increment trace_uprobe->nhit
  uprobes/tracing: Kill uprobe_trace_consumer, embed uprobe_consumer into trace_uprobe
  uprobes/tracing: Introduce is_trace_uprobe_enabled()
  ...

1 files changed, 30 insertions, 138 deletions

diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index f3151d3c70ce..774c90713a53 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -224,130 +224,28 @@ static bool perf_evlist__equal(struct perf_evlist *evlist,
 
 static int perf_record__open(struct perf_record *rec)
 {
+	char msg[512];
 	struct perf_evsel *pos;
 	struct perf_evlist *evlist = rec->evlist;
 	struct perf_session *session = rec->session;
 	struct perf_record_opts *opts = &rec->opts;
 	int rc = 0;
 
-	/*
-	 * Set the evsel leader links before we configure attributes,
-	 * since some might depend on this info.
-	 */
-	if (opts->group)
-		perf_evlist__set_leader(evlist);
-
-	perf_evlist__config_attrs(evlist, opts);
+	perf_evlist__config(evlist, opts);
 
 	list_for_each_entry(pos, &evlist->entries, node) {
-		struct perf_event_attr *attr = &pos->attr;
-		/*
-		 * Check if parse_single_tracepoint_event has already asked for
-		 * PERF_SAMPLE_TIME.
-		 *
-		 * XXX this is kludgy but short term fix for problems introduced by
-		 * eac23d1c that broke 'perf script' by having different sample_types
-		 * when using multiple tracepoint events when we use a perf binary
-		 * that tries to use sample_id_all on an older kernel.
-		 *
-		 * We need to move counter creation to perf_session, support
-		 * different sample_types, etc.
-		 */
-		bool time_needed = attr->sample_type & PERF_SAMPLE_TIME;
-
-fallback_missing_features:
-		if (opts->exclude_guest_missing)
-			attr->exclude_guest = attr->exclude_host = 0;
-retry_sample_id:
-		attr->sample_id_all = opts->sample_id_all_missing ? 0 : 1;
 try_again:
 		if (perf_evsel__open(pos, evlist->cpus, evlist->threads) < 0) {
-			int err = errno;
-
-			if (err == EPERM || err == EACCES) {
-				ui__error_paranoid();
-				rc = -err;
-				goto out;
-			} else if (err ==  ENODEV && opts->target.cpu_list) {
-				pr_err("No such device - did you specify"
-				       " an out-of-range profile CPU?\n");
-				rc = -err;
-				goto out;
-			} else if (err == EINVAL) {
-				if (!opts->exclude_guest_missing &&
-				    (attr->exclude_guest || attr->exclude_host)) {
-					pr_debug("Old kernel, cannot exclude "
-						 "guest or host samples.\n");
-					opts->exclude_guest_missing = true;
-					goto fallback_missing_features;
-				} else if (!opts->sample_id_all_missing) {
-					/*
-					 * Old kernel, no attr->sample_id_type_all field
-					 */
-					opts->sample_id_all_missing = true;
-					if (!opts->sample_time && !opts->raw_samples && !time_needed)
-						attr->sample_type &= ~PERF_SAMPLE_TIME;
-
-					goto retry_sample_id;
-				}
-			}
-
-			/*
-			 * If it's cycles then fall back to hrtimer
-			 * based cpu-clock-tick sw counter, which
-			 * is always available even if no PMU support.
-			 *
-			 * PPC returns ENXIO until 2.6.37 (behavior changed
-			 * with commit b0a873e).
-			 */
-			if ((err == ENOENT || err == ENXIO)
-					&& attr->type == PERF_TYPE_HARDWARE
-					&& attr->config == PERF_COUNT_HW_CPU_CYCLES) {
-
+			if (perf_evsel__fallback(pos, errno, msg, sizeof(msg))) {
 				if (verbose)
-					ui__warning("The cycles event is not supported, "
-						    "trying to fall back to cpu-clock-ticks\n");
-				attr->type = PERF_TYPE_SOFTWARE;
-				attr->config = PERF_COUNT_SW_CPU_CLOCK;
-				if (pos->name) {
-					free(pos->name);
-					pos->name = NULL;
-				}
+					ui__warning("%s\n", msg);
 				goto try_again;
 			}
 
-			if (err == ENOENT) {
-				ui__error("The %s event is not supported.\n",
-					  perf_evsel__name(pos));
-				rc = -err;
-				goto out;
-			} else if ((err == EOPNOTSUPP) && (attr->precise_ip)) {
-				ui__error("\'precise\' request may not be supported. "
-					  "Try removing 'p' modifier\n");
-				rc = -err;
-				goto out;
-			}
-
-			printf("\n");
-			error("sys_perf_event_open() syscall returned with %d "
-			      "(%s) for event %s. /bin/dmesg may provide "
-			      "additional information.\n",
-			      err, strerror(err), perf_evsel__name(pos));
-
-#if defined(__i386__) || defined(__x86_64__)
-			if (attr->type == PERF_TYPE_HARDWARE &&
-			    err == EOPNOTSUPP) {
-				pr_err("No hardware sampling interrupt available."
-				       " No APIC? If so then you can boot the kernel"
-				       " with the \"lapic\" boot parameter to"
-				       " force-enable it.\n");
-				rc = -err;
-				goto out;
-			}
-#endif
-
-			pr_err("No CONFIG_PERF_EVENTS=y kernel support configured?\n");
-			rc = -err;
+			rc = -errno;
+			perf_evsel__open_strerror(pos, &opts->target,
+						  errno, msg, sizeof(msg));
+			ui__error("%s\n", msg);
 			goto out;
 		}
 	}
@@ -430,10 +328,6 @@ static void perf_event__synthesize_guest_os(struct machine *machine, void *data)
 {
 	int err;
 	struct perf_tool *tool = data;
-
-	if (machine__is_host(machine))
-		return;
-
 	/*
 	 *As for guest kernel when processing subcommand record&report,
 	 *we arrange module mmap prior to guest kernel mmap and trigger
@@ -592,6 +486,9 @@ static int __cmd_record(struct perf_record *rec, int argc, const char **argv)
 		goto out_delete_session;
 	}
 
+	if (!evsel_list->nr_groups)
+		perf_header__clear_feat(&session->header, HEADER_GROUP_DESC);
+
 	/*
 	 * perf_session__delete(session) will be called at perf_record__exit()
 	 */
@@ -618,12 +515,7 @@ static int __cmd_record(struct perf_record *rec, int argc, const char **argv)
 
 	rec->post_processing_offset = lseek(output, 0, SEEK_CUR);
 
-	machine = perf_session__find_host_machine(session);
-	if (!machine) {
-		pr_err("Couldn't find native kernel information.\n");
-		err = -1;
-		goto out_delete_session;
-	}
+	machine = &session->machines.host;
 
 	if (opts->pipe_output) {
 		err = perf_event__synthesize_attrs(tool, session,
@@ -676,9 +568,10 @@ static int __cmd_record(struct perf_record *rec, int argc, const char **argv)
 		       "Symbol resolution may be skewed if relocation was used (e.g. kexec).\n"
 		       "Check /proc/modules permission or run as root.\n");
 
-	if (perf_guest)
-		perf_session__process_machines(session, tool,
-					       perf_event__synthesize_guest_os);
+	if (perf_guest) {
+		machines__process_guests(&session->machines,
+					 perf_event__synthesize_guest_os, tool);
+	}
 
 	if (!opts->target.system_wide)
 		err = perf_event__synthesize_thread_map(tool, evsel_list->threads,
@@ -875,11 +768,10 @@ static int get_stack_size(char *str, unsigned long *_size)
 }
 #endif /* LIBUNWIND_SUPPORT */
 
-static int
-parse_callchain_opt(const struct option *opt __maybe_unused, const char *arg,
-		    int unset)
+int record_parse_callchain_opt(const struct option *opt,
+			       const char *arg, int unset)
 {
-	struct perf_record *rec = (struct perf_record *)opt->value;
+	struct perf_record_opts *opts = opt->value;
 	char *tok, *name, *saveptr = NULL;
 	char *buf;
 	int ret = -1;
@@ -905,7 +797,7 @@ parse_callchain_opt(const struct option *opt __maybe_unused, const char *arg,
 		/* Framepointer style */
 		if (!strncmp(name, "fp", sizeof("fp"))) {
 			if (!strtok_r(NULL, ",", &saveptr)) {
-				rec->opts.call_graph = CALLCHAIN_FP;
+				opts->call_graph = CALLCHAIN_FP;
 				ret = 0;
 			} else
 				pr_err("callchain: No more arguments "
@@ -918,20 +810,20 @@ parse_callchain_opt(const struct option *opt __maybe_unused, const char *arg,
 			const unsigned long default_stack_dump_size = 8192;
 
 			ret = 0;
-			rec->opts.call_graph = CALLCHAIN_DWARF;
-			rec->opts.stack_dump_size = default_stack_dump_size;
+			opts->call_graph = CALLCHAIN_DWARF;
+			opts->stack_dump_size = default_stack_dump_size;
 
 			tok = strtok_r(NULL, ",", &saveptr);
 			if (tok) {
 				unsigned long size = 0;
 
 				ret = get_stack_size(tok, &size);
-				rec->opts.stack_dump_size = size;
+				opts->stack_dump_size = size;
 			}
 
 			if (!ret)
 				pr_debug("callchain: stack dump size %d\n",
-					 rec->opts.stack_dump_size);
+					 opts->stack_dump_size);
 #endif /* LIBUNWIND_SUPPORT */
 		} else {
 			pr_err("callchain: Unknown -g option "
@@ -944,7 +836,7 @@ parse_callchain_opt(const struct option *opt __maybe_unused, const char *arg,
 	free(buf);
 
 	if (!ret)
-		pr_debug("callchain: type %d\n", rec->opts.call_graph);
+		pr_debug("callchain: type %d\n", opts->call_graph);
 
 	return ret;
 }
@@ -982,9 +874,9 @@ static struct perf_record record = {
 #define CALLCHAIN_HELP "do call-graph (stack chain/backtrace) recording: "
 
 #ifdef LIBUNWIND_SUPPORT
-static const char callchain_help[] = CALLCHAIN_HELP "[fp] dwarf";
+const char record_callchain_help[] = CALLCHAIN_HELP "[fp] dwarf";
 #else
-static const char callchain_help[] = CALLCHAIN_HELP "[fp]";
+const char record_callchain_help[] = CALLCHAIN_HELP "[fp]";
 #endif
 
 /*
@@ -1028,9 +920,9 @@ const struct option record_options[] = {
 		     "number of mmap data pages"),
 	OPT_BOOLEAN(0, "group", &record.opts.group,
 		    "put the counters into a counter group"),
-	OPT_CALLBACK_DEFAULT('g', "call-graph", &record, "mode[,dump_size]",
-			     callchain_help, &parse_callchain_opt,
-			     "fp"),
+	OPT_CALLBACK_DEFAULT('g', "call-graph", &record.opts,
+			     "mode[,dump_size]", record_callchain_help,
+			     &record_parse_callchain_opt, "fp"),
 	OPT_INCR('v', "verbose", &verbose,
 		    "be more verbose (show counter open errors, etc)"),
 	OPT_BOOLEAN('q', "quiet", &quiet, "don't print any message"),