Merge tag 'omap-fixes-against-v3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Merge "omap fixes against v3.17-rc3" from Tony Lindgren:

Few fixes for omaps mostly for various devices to get them working
properly on the new am437x and dra7 hardware for several devices
such as I2C, NAND, DDR3 and USB. There's also a clock fix for omap3.

And also included are two minor cosmetic fixes that are not
stictly fixes for the new hardware support added recently to
downgrade a GPMC warning into a debug statement, and fix the
confusing comments for dra7-evm spi1 mux.

Note that these are all .dts changes except for a GPMC change.

* tag 'omap-fixes-against-v3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (255 commits)
  ARM: dts: dra7-evm: Add vtt regulator support
  ARM: dts: dra7-evm: Fix spi1 mux documentation
  ARM: dts: am43x-epos-evm: Disable QSPI to prevent conflict with GPMC-NAND
  ARM: OMAP2+: gpmc: Don't complain if wait pin is used without r/w monitoring
  ARM: dts: am43xx-epos-evm: Don't use read/write wait monitoring
  ARM: dts: am437x-gp-evm: Don't use read/write wait monitoring
  ARM: dts: am437x-gp-evm: Use BCH16 ECC scheme instead of BCH8
  ARM: dts: am43x-epos-evm: Use BCH16 ECC scheme instead of BCH8
  ARM: dts: am4372: fix USB regs size
  ARM: dts: am437x-gp: switch i2c0 to 100KHz
  ARM: dts: dra7-evm: Fix 8th NAND partition's name
  ARM: dts: dra7-evm: Fix i2c3 pinmux and frequency
  Linux 3.17-rc3
  ...

Signed-off-by: Kevin Hilman <khilman@linaro.org>

37 files changed, 5625 insertions, 0 deletions

diff --git a/tools/usb/usbip/.gitignore b/tools/usb/usbip/.gitignore
new file mode 100644
index 000000000000..9aad9e30a8ba
--- /dev/null
+++ b/tools/usb/usbip/.gitignore
@@ -0,0 +1,28 @@
+Makefile
+Makefile.in
+aclocal.m4
+autom4te.cache/
+config.guess
+config.h
+config.h.in
+config.log
+config.status
+config.sub
+configure
+depcomp
+install-sh
+libsrc/Makefile
+libsrc/Makefile.in
+libtool
+ltmain.sh
+missing
+src/Makefile
+src/Makefile.in
+stamp-h1
+libsrc/libusbip.la
+libsrc/libusbip_la-names.lo
+libsrc/libusbip_la-usbip_common.lo
+libsrc/libusbip_la-usbip_host_driver.lo
+libsrc/libusbip_la-vhci_driver.lo
+src/usbip
+src/usbipd
diff --git a/tools/usb/usbip/AUTHORS b/tools/usb/usbip/AUTHORS
new file mode 100644
index 000000000000..a27ea8d03aec
--- /dev/null
+++ b/tools/usb/usbip/AUTHORS
@@ -0,0 +1,3 @@
+Takahiro Hirofuchi
+Robert Leibl
+matt mooney <mfm@muteddisk.com>
diff --git a/tools/usb/usbip/COPYING b/tools/usb/usbip/COPYING
new file mode 100644
index 000000000000..c5611e48a8e1
--- /dev/null
+++ b/tools/usb/usbip/COPYING
@@ -0,0 +1,340 @@
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+     51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	    How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) year  name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Library General
+Public License instead of this License.
diff --git a/tools/usb/usbip/INSTALL b/tools/usb/usbip/INSTALL
new file mode 100644
index 000000000000..d3c5b40a9409
--- /dev/null
+++ b/tools/usb/usbip/INSTALL
@@ -0,0 +1,237 @@
+Installation Instructions
+*************************
+
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
+2006, 2007 Free Software Foundation, Inc.
+
+This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
+Basic Installation
+==================
+
+Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package.  The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+   It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring.  Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+   The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'.  You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.
+
+     Running `configure' might take a while.  While running, it prints
+     some messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.
+
+  5. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+  6. Often, you can also type `make uninstall' to remove the installed
+     files again.
+
+Compilers and Options
+=====================
+
+Some systems require unusual options for compilation or linking that the
+`configure' script does not know about.  Run `./configure --help' for
+details on some of the pertinent environment variables.
+
+   You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment.  Here
+is an example:
+
+     ./configure CC=c99 CFLAGS=-g LIBS=-lposix
+
+   *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you can use GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory.  After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
+
+Installation Names
+==================
+
+By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc.  You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+There may be some features `configure' cannot figure out automatically,
+but needs to determine by the type of machine the package will run on.
+Usually, assuming the package is built to be run on the _same_
+architectures, `configure' can figure that out, but if it prints a
+message saying it cannot guess the machine type, give it the
+`--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+     CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+     OS KERNEL-OS
+
+   See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+   If you are _building_ compiler tools for cross-compiling, you should
+use the option `--target=TYPE' to select the type of system they will
+produce code for.
+
+   If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+If you want to set default values for `configure' scripts to share, you
+can create a site shell script called `config.site' that gives default
+values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+Variables not defined in a site shell script can be set in the
+environment passed to `configure'.  However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost.  In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'.  For example:
+
+     ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug.  Until the bug is fixed you can use this workaround:
+
+     CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+`configure' Invocation
+======================
+
+`configure' recognizes the following options to control how it operates.
+
+`--help'
+`-h'
+     Print a summary of the options to `configure', and exit.
+
+`--version'
+`-V'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`--cache-file=FILE'
+     Enable the cache: use and save the results of the tests in FILE,
+     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     disable caching.
+
+`--config-cache'
+`-C'
+     Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`configure' also accepts some other, not widely useful, options.  Run
+`configure --help' for more details.
+
diff --git a/tools/usb/usbip/Makefile.am b/tools/usb/usbip/Makefile.am
new file mode 100644
index 000000000000..66f8bf038c9f
--- /dev/null
+++ b/tools/usb/usbip/Makefile.am
@@ -0,0 +1,6 @@
+SUBDIRS := libsrc src
+includedir = @includedir@/usbip
+include_HEADERS := $(addprefix libsrc/, \
+		     usbip_common.h vhci_driver.h usbip_host_driver.h)
+
+dist_man_MANS := $(addprefix doc/, usbip.8 usbipd.8)
diff --git a/tools/usb/usbip/README b/tools/usb/usbip/README
new file mode 100644
index 000000000000..831f49fea3ce
--- /dev/null
+++ b/tools/usb/usbip/README
@@ -0,0 +1,202 @@
+#
+# README for usbip-utils
+#
+# Copyright (C) 2011 matt mooney <mfm@muteddisk.com>
+#               2005-2008 Takahiro Hirofuchi
+
+
+[Requirements]
+    - USB/IP device drivers
+	Found in the staging directory of the Linux kernel.
+
+    - libudev >= 2.0
+	libudev library
+
+    - libwrap0-dev
+	tcp wrapper library
+
+    - gcc >= 4.0
+
+    - libtool, automake >= 1.9, autoconf >= 2.5.0, pkg-config
+
+[Optional]
+    - hwdata
+        Contains USB device identification data.
+
+
+[Install]
+    0. Generate configuration scripts.
+	$ ./autogen.sh
+
+    1. Compile & install the userspace utilities.
+	$ ./configure [--with-tcp-wrappers=no] [--with-usbids-dir=<dir>]
+	$ make install
+
+    2. Compile & install USB/IP drivers.
+
+
+[Usage]
+    server:# (Physically attach your USB device.)
+
+    server:# insmod usbip-core.ko
+    server:# insmod usbip-host.ko
+
+    server:# usbipd -D
+	- Start usbip daemon.
+
+    server:# usbip list -l
+	- List driver assignments for USB devices.
+
+    server:# usbip bind --busid 1-2
+	- Bind usbip-host.ko to the device with busid 1-2.
+	- The USB device 1-2 is now exportable to other hosts!
+	- Use `usbip unbind --busid 1-2' to stop exporting the device.
+
+    client:# insmod usbip-core.ko
+    client:# insmod vhci-hcd.ko
+
+    client:# usbip list --remote <host>
+	- List exported USB devices on the <host>.
+
+    client:# usbip attach --remote <host> --busid 1-2
+	- Connect the remote USB device.
+
+    client:# usbip port
+	- Show virtual port status.
+
+    client:# usbip detach --port <port>
+	- Detach the USB device.
+
+
+[Example]
+---------------------------
+	SERVER SIDE
+---------------------------
+Physically attach your USB devices to this host.
+
+    trois:# insmod path/to/usbip-core.ko
+    trois:# insmod path/to/usbip-host.ko
+    trois:# usbipd -D
+
+In another terminal, let's look up what USB devices are physically
+attached to this host.
+
+    trois:# usbip list -l
+    Local USB devices
+    =================
+     - busid 1-1 (05a9:a511)
+	     1-1:1.0 -> ov511
+
+     - busid 3-2 (0711:0902)
+	     3-2:1.0 -> none
+
+     - busid 3-3.1 (08bb:2702)
+	     3-3.1:1.0 -> snd-usb-audio
+	     3-3.1:1.1 -> snd-usb-audio
+
+     - busid 3-3.2 (04bb:0206)
+	     3-3.2:1.0 -> usb-storage
+
+     - busid 3-3 (0409:0058)
+	     3-3:1.0 -> hub
+
+     - busid 4-1 (046d:08b2)
+	     4-1:1.0 -> none
+	     4-1:1.1 -> none
+	     4-1:1.2 -> none
+
+     - busid 5-2 (058f:9254)
+	     5-2:1.0 -> hub
+
+A USB storage device of busid 3-3.2 is now bound to the usb-storage
+driver. To export this device, we first mark the device as
+"exportable"; the device is bound to the usbip-host driver. Please
+remember you can not export a USB hub.
+
+Mark the device of busid 3-3.2 as exportable:
+
+    trois:# usbip --debug bind --busid 3-3.2
+    ...
+    usbip debug: usbip_bind.c:162:[unbind_other] 3-3.2:1.0 -> usb-storage
+    ...
+    bind device on busid 3-3.2: complete
+
+    trois:# usbip list -l
+    Local USB devices
+    =================
+    ...
+
+     - busid 3-3.2 (04bb:0206)
+	     3-3.2:1.0 -> usbip-host
+    ...
+
+---------------------------
+	CLIENT SIDE
+---------------------------
+First, let's list available remote devices that are marked as
+exportable on the host.
+
+    deux:# insmod path/to/usbip-core.ko
+    deux:# insmod path/to/vhci-hcd.ko
+
+    deux:# usbip list --remote 10.0.0.3
+    Exportable USB devices
+    ======================
+     - 10.0.0.3
+	    1-1: Prolific Technology, Inc. : unknown product (067b:3507)
+	       : /sys/devices/pci0000:00/0000:00:1f.2/usb1/1-1
+	       : (Defined at Interface level) / unknown subclass / unknown protocol (00/00/00)
+	       :  0 - Mass Storage / SCSI / Bulk (Zip) (08/06/50)
+
+	1-2.2.1: Apple Computer, Inc. : unknown product (05ac:0203)
+	       : /sys/devices/pci0000:00/0000:00:1f.2/usb1/1-2/1-2.2/1-2.2.1
+	       : (Defined at Interface level) / unknown subclass / unknown protocol (00/00/00)
+	       :  0 - Human Interface Devices / Boot Interface Subclass / Keyboard (03/01/01)
+
+	1-2.2.3: OmniVision Technologies, Inc. : OV511+ WebCam (05a9:a511)
+	       : /sys/devices/pci0000:00/0000:00:1f.2/usb1/1-2/1-2.2/1-2.2.3
+	       : (Defined at Interface level) / unknown subclass / unknown protocol (00/00/00)
+	       :  0 - Vendor Specific Class / unknown subclass / unknown protocol (ff/00/00)
+
+	    3-1: Logitech, Inc. : QuickCam Pro 4000 (046d:08b2)
+	       : /sys/devices/pci0000:00/0000:00:1e.0/0000:02:0a.0/usb3/3-1
+	       : (Defined at Interface level) / unknown subclass / unknown protocol (00/00/00)
+	       :  0 - Data / unknown subclass / unknown protocol (0a/ff/00)
+	       :  1 - Audio / Control Device / unknown protocol (01/01/00)
+	       :  2 - Audio / Streaming / unknown protocol (01/02/00)
+
+Attach a remote USB device:
+
+    deux:# usbip attach --remote 10.0.0.3 --busid 1-1
+    port 0 attached
+
+Show the devices attached to this client:
+
+    deux:# usbip port
+    Port 00: <Port in Use> at Full Speed(12Mbps)
+	   Prolific Technology, Inc. : unknown product (067b:3507)
+	   6-1 -> usbip://10.0.0.3:3240/1-1  (remote bus/dev 001/004)
+	   6-1:1.0 used by usb-storage
+			  /sys/class/scsi_device/0:0:0:0/device
+			  /sys/class/scsi_host/host0/device
+			  /sys/block/sda/device
+
+Detach the imported device:
+
+    deux:# usbip detach --port 0
+    port 0 detached
+
+
+[Checklist]
+    - See 'Debug Tips' on the project wiki.
+	- http://usbip.wiki.sourceforge.net/how-to-debug-usbip
+    - usbip-host.ko must be bound to the target device.
+	- See /proc/bus/usb/devices and find "Driver=..." lines of the device.
+    - Shutdown firewall.
+	- usbip now uses TCP port 3240.
+    - Disable SELinux.
+    - Check the kernel and daemon messages.
+
+
+[Contact]
+    Mailing List: linux-usb@vger.kernel.org
diff --git a/tools/usb/usbip/autogen.sh b/tools/usb/usbip/autogen.sh
new file mode 100755
index 000000000000..e1112d3fcbf6
--- /dev/null
+++ b/tools/usb/usbip/autogen.sh
@@ -0,0 +1,9 @@
+#!/bin/sh -x
+
+#aclocal
+#autoheader
+#libtoolize --copy --force
+#automake-1.9 -acf
+#autoconf
+
+autoreconf -i -f -v
diff --git a/tools/usb/usbip/cleanup.sh b/tools/usb/usbip/cleanup.sh
new file mode 100755
index 000000000000..955c3ccb729a
--- /dev/null
+++ b/tools/usb/usbip/cleanup.sh
@@ -0,0 +1,12 @@
+#!/bin/sh
+
+if [ -r Makefile ]; then
+	make distclean
+fi
+
+FILES="aclocal.m4 autom4te.cache compile config.guess config.h.in config.log \
+       config.status config.sub configure cscope.out depcomp install-sh      \
+       libsrc/Makefile libsrc/Makefile.in libtool ltmain.sh Makefile         \
+       Makefile.in missing src/Makefile src/Makefile.in"
+
+rm -vRf $FILES
diff --git a/tools/usb/usbip/configure.ac b/tools/usb/usbip/configure.ac
new file mode 100644
index 000000000000..607d05c5ccfd
--- /dev/null
+++ b/tools/usb/usbip/configure.ac
@@ -0,0 +1,111 @@
+dnl Process this file with autoconf to produce a configure script.
+
+AC_PREREQ(2.59)
+AC_INIT([usbip-utils], [2.0], [linux-usb@vger.kernel.org])
+AC_DEFINE([USBIP_VERSION], [0x00000111], [binary-coded decimal version number])
+
+CURRENT=0
+REVISION=1
+AGE=0
+AC_SUBST([LIBUSBIP_VERSION], [$CURRENT:$REVISION:$AGE], [library version])
+
+AC_CONFIG_SRCDIR([src/usbipd.c])
+AC_CONFIG_HEADERS([config.h])
+
+AM_INIT_AUTOMAKE([foreign])
+LT_INIT
+
+# Silent build for automake >= 1.11
+m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
+
+AC_SUBST([EXTRA_CFLAGS], ["-Wall -Werror -Wextra -std=gnu99"])
+
+# Checks for programs.
+AC_PROG_CC
+AC_PROG_INSTALL
+AC_PROG_MAKE_SET
+
+# Checks for header files.
+AC_HEADER_DIRENT
+AC_HEADER_STDC
+AC_CHECK_HEADERS([arpa/inet.h fcntl.h netdb.h netinet/in.h stdint.h stdlib.h dnl
+		  string.h sys/socket.h syslog.h unistd.h])
+
+# Checks for typedefs, structures, and compiler characteristics.
+AC_TYPE_INT32_T
+AC_TYPE_SIZE_T
+AC_TYPE_SSIZE_T
+AC_TYPE_UINT16_T
+AC_TYPE_UINT32_T
+AC_TYPE_UINT8_T
+
+# Checks for library functions.
+AC_FUNC_REALLOC
+AC_CHECK_FUNCS([memset mkdir regcomp socket strchr strerror strstr dnl
+		strtoul])
+
+AC_CHECK_HEADER([libudev.h],
+		[AC_CHECK_LIB([udev], [udev_new],
+			      [LIBS="$LIBS -ludev"],
+			      [AC_MSG_ERROR([Missing udev library!])])],
+		[AC_MSG_ERROR([Missing /usr/include/libudev.h])])
+
+# Checks for libwrap library.
+AC_MSG_CHECKING([whether to use the libwrap (TCP wrappers) library])
+AC_ARG_WITH([tcp-wrappers],
+	    [AS_HELP_STRING([--with-tcp-wrappers],
+			    [use the libwrap (TCP wrappers) library])],
+	    dnl [ACTION-IF-GIVEN]
+	    [if test "$withval" = "yes"; then
+		     AC_MSG_RESULT([yes])
+		     AC_MSG_CHECKING([for hosts_access in -lwrap])
+		     saved_LIBS="$LIBS"
+		     LIBS="-lwrap $saved_LIBS"
+		     AC_TRY_LINK(
+		       [int hosts_access(); int allow_severity, deny_severity;],
+		       [hosts_access()],
+		       [AC_MSG_RESULT([yes]);
+			AC_DEFINE([HAVE_LIBWRAP], [1],
+				  [use tcp wrapper]) wrap_LIB="-lwrap"],
+		       [AC_MSG_RESULT([not found]); exit 1])
+	     else
+		     AC_MSG_RESULT([no]);
+	     fi],
+	    dnl [ACTION-IF-NOT-GIVEN]
+	    [AC_MSG_RESULT([(default)])
+	     AC_MSG_CHECKING([for hosts_access in -lwrap])
+	     saved_LIBS="$LIBS"
+	     LIBS="-lwrap $saved_LIBS"
+	     AC_TRY_LINK(
+	       [int hosts_access(); int allow_severity, deny_severity;],
+	       [hosts_access()],
+	       [AC_MSG_RESULT([yes]);
+		AC_DEFINE([HAVE_LIBWRAP], [1], [use tcp wrapper])],
+	       [AC_MSG_RESULT([no]); LIBS="$saved_LIBS"])])
+
+# Sets directory containing usb.ids.
+AC_ARG_WITH([usbids-dir],
+	    [AS_HELP_STRING([--with-usbids-dir=DIR],
+	       [where usb.ids is found (default /usr/share/hwdata/)])],
+	    [USBIDS_DIR=$withval], [USBIDS_DIR="/usr/share/hwdata/"])
+AC_SUBST([USBIDS_DIR])
+
+# use _FORTIFY_SOURCE
+AC_MSG_CHECKING([whether to use fortify])
+AC_ARG_WITH([fortify],
+	    [AS_HELP_STRING([--with-fortify],
+			    [use _FORTIFY_SROUCE option when compiling)])],
+			    dnl [ACTION-IF-GIVEN]
+			    [if test "$withval" = "yes"; then
+				AC_MSG_RESULT([yes])
+				CFLAGS="$CFLAGS -D_FORTIFY_SOURCE -O"
+			     else
+			     	AC_MSG_RESULT([no])
+				CFLAGS="$CFLAGS -U_FORTIFY_SOURCE"
+			     fi
+			    ],
+			    dnl [ACTION-IF-NOT-GIVEN]
+			    [AC_MSG_RESULT([default])])
+
+AC_CONFIG_FILES([Makefile libsrc/Makefile src/Makefile])
+AC_OUTPUT
diff --git a/tools/usb/usbip/doc/usbip.8 b/tools/usb/usbip/doc/usbip.8
new file mode 100644
index 000000000000..a6097be25d28
--- /dev/null
+++ b/tools/usb/usbip/doc/usbip.8
@@ -0,0 +1,95 @@
+.TH USBIP "8" "February 2009" "usbip" "System Administration Utilities"
+.SH NAME
+usbip \- manage USB/IP devices
+.SH SYNOPSIS
+.B usbip
+[\fIoptions\fR] <\fIcommand\fR> <\fIargs\fR>
+
+.SH DESCRIPTION
+On a USB/IP server, devices can be listed, bound, and unbound using
+this program.  On a USB/IP client, devices exported by USB/IP servers
+can be listed, attached and detached.
+
+.SH OPTIONS
+.HP
+\fB\-\-debug\fR
+.IP
+Print debugging information.
+.PP
+
+.HP
+\fB\-\-log\fR
+.IP
+Log to syslog.
+.PP
+
+.HP
+\fB\-\-tcp-port PORT\fR
+.IP
+Connect to PORT on remote host (used for attach and list --remote).
+.PP
+
+.SH COMMANDS
+.HP
+\fBversion\fR
+.IP
+Show version and exit.
+.PP
+
+.HP
+\fBhelp\fR [\fIcommand\fR]
+.IP
+Print the program help message, or help on a specific command, and
+then exit.
+.PP
+
+.HP
+\fBattach\fR \-\-remote=<\fIhost\fR> \-\-busid=<\fIbus_id\fR>
+.IP
+Attach a remote USB device.
+.PP
+
+.HP
+\fBdetach\fR \-\-port=<\fIport\fR>
+.IP
+Detach an imported USB device.
+.PP
+
+.HP
+\fBbind\fR \-\-busid=<\fIbusid\fR>
+.IP
+Make a device exportable.
+.PP
+
+.HP
+\fBunbind\fR \-\-busid=<\fIbusid\fR>
+.IP
+Stop exporting a device so it can be used by a local driver.
+.PP
+
+.HP
+\fBlist\fR \-\-remote=<\fIhost\fR>
+.IP
+List USB devices exported by a remote host.
+.PP
+
+.HP
+\fBlist\fR \-\-local
+.IP
+List local USB devices.
+.PP
+
+
+.SH EXAMPLES
+
+    client:# usbip list --remote=server
+        - List exportable usb devices on the server.
+
+    client:# usbip attach --remote=server --busid=1-2
+        - Connect the remote USB device.
+
+    client:# usbip detach --port=0
+        - Detach the usb device.
+
+.SH "SEE ALSO"
+\fBusbipd\fP\fB(8)\fB\fP
diff --git a/tools/usb/usbip/doc/usbipd.8 b/tools/usb/usbip/doc/usbipd.8
new file mode 100644
index 000000000000..ac4635db3f03
--- /dev/null
+++ b/tools/usb/usbip/doc/usbipd.8
@@ -0,0 +1,91 @@
+.TH USBIP "8" "February 2009" "usbip" "System Administration Utilities"
+.SH NAME
+usbipd \- USB/IP server daemon
+.SH SYNOPSIS
+.B usbipd
+[\fIoptions\fR]
+
+.SH DESCRIPTION
+.B usbipd
+provides USB/IP clients access to exported USB devices.
+
+Devices have to explicitly be exported using
+.B usbip bind
+before usbipd makes them available to other hosts.
+
+The daemon accepts connections from USB/IP clients
+on TCP port 3240 by default.
+
+.SH OPTIONS
+.HP
+\fB\-4\fR, \fB\-\-ipv4\fR
+.IP
+Bind to IPv4. Default is both.
+.PP
+
+.HP
+\fB\-6\fR, \fB\-\-ipv6\fR
+.IP
+Bind to IPv6. Default is both.
+.PP
+
+.HP
+\fB\-D\fR, \fB\-\-daemon\fR
+.IP
+Run as a daemon process.
+.PP
+
+.HP
+\fB\-d\fR, \fB\-\-debug\fR
+.IP
+Print debugging information.
+.PP
+
+.HP
+\fB\-PFILE\fR, \fB\-\-pid FILE\fR
+.IP
+Write process id to FILE.
+.br
+If no FILE specified, use /var/run/usbipd.pid
+.PP
+
+\fB\-tPORT\fR, \fB\-\-tcp\-port PORT\fR
+.IP
+Listen on TCP/IP port PORT.
+.PP
+
+\fB\-h\fR, \fB\-\-help\fR
+.IP
+Print the program help message and exit.
+.PP
+
+.HP
+\fB\-v\fR, \fB\-\-version\fR
+.IP
+Show version.
+.PP
+
+.SH LIMITATIONS
+
+.B usbipd
+offers no authentication or authorization for USB/IP. Any
+USB/IP client can connect and use exported devices.
+
+.SH EXAMPLES
+
+    server:# modprobe usbip
+
+    server:# usbipd -D
+        - Start usbip daemon.
+
+    server:# usbip list --local
+        - List driver assignments for usb devices.
+
+    server:# usbip bind --busid=1-2
+        - Bind usbip-host.ko to the device of busid 1-2.
+        - A usb device 1-2 is now exportable to other hosts!
+        - Use 'usbip unbind --busid=1-2' when you want to shutdown exporting and use the device locally.
+
+.SH "SEE ALSO"
+\fBusbip\fP\fB(8)\fB\fP
+
diff --git a/tools/usb/usbip/libsrc/Makefile.am b/tools/usb/usbip/libsrc/Makefile.am
new file mode 100644
index 000000000000..7c8f8a4d54e4
--- /dev/null
+++ b/tools/usb/usbip/libsrc/Makefile.am
@@ -0,0 +1,8 @@
+libusbip_la_CPPFLAGS = -DUSBIDS_FILE='"@USBIDS_DIR@/usb.ids"'
+libusbip_la_CFLAGS   = @EXTRA_CFLAGS@
+libusbip_la_LDFLAGS  = -version-info @LIBUSBIP_VERSION@
+
+lib_LTLIBRARIES := libusbip.la
+libusbip_la_SOURCES := names.c names.h usbip_host_driver.c usbip_host_driver.h \
+		       usbip_common.c usbip_common.h vhci_driver.c vhci_driver.h \
+		       sysfs_utils.c sysfs_utils.h
diff --git a/tools/usb/usbip/libsrc/list.h b/tools/usb/usbip/libsrc/list.h
new file mode 100644
index 000000000000..8d0c936e184f
--- /dev/null
+++ b/tools/usb/usbip/libsrc/list.h
@@ -0,0 +1,136 @@
+#ifndef _LIST_H
+#define _LIST_H
+
+/* Stripped down implementation of linked list taken
+ * from the Linux Kernel.
+ */
+
+/*
+ * Simple doubly linked list implementation.
+ *
+ * Some of the internal functions ("__xxx") are useful when
+ * manipulating whole lists rather than single entries, as
+ * sometimes we already know the next/prev entries and we can
+ * generate better code by using them directly rather than
+ * using the generic single-entry routines.
+ */
+
+struct list_head {
+	struct list_head *next, *prev;
+};
+
+#define LIST_HEAD_INIT(name) { &(name), &(name) }
+
+#define LIST_HEAD(name) \
+	struct list_head name = LIST_HEAD_INIT(name)
+
+static inline void INIT_LIST_HEAD(struct list_head *list)
+{
+	list->next = list;
+	list->prev = list;
+}
+
+/*
+ * Insert a new entry between two known consecutive entries.
+ *
+ * This is only for internal list manipulation where we know
+ * the prev/next entries already!
+ */
+static inline void __list_add(struct list_head *new,
+			      struct list_head *prev,
+			      struct list_head *next)
+{
+	next->prev = new;
+	new->next = next;
+	new->prev = prev;
+	prev->next = new;
+}
+
+/**
+ * list_add - add a new entry
+ * @new: new entry to be added
+ * @head: list head to add it after
+ *
+ * Insert a new entry after the specified head.
+ * This is good for implementing stacks.
+ */
+static inline void list_add(struct list_head *new, struct list_head *head)
+{
+	__list_add(new, head, head->next);
+}
+
+/*
+ * Delete a list entry by making the prev/next entries
+ * point to each other.
+ *
+ * This is only for internal list manipulation where we know
+ * the prev/next entries already!
+ */
+static inline void __list_del(struct list_head * prev, struct list_head * next)
+{
+	next->prev = prev;
+	prev->next = next;
+}
+
+#define POISON_POINTER_DELTA 0
+#define LIST_POISON1  ((void *) 0x00100100 + POISON_POINTER_DELTA)
+#define LIST_POISON2  ((void *) 0x00200200 + POISON_POINTER_DELTA)
+
+/**
+ * list_del - deletes entry from list.
+ * @entry: the element to delete from the list.
+ * Note: list_empty() on entry does not return true after this, the entry is
+ * in an undefined state.
+ */
+static inline void __list_del_entry(struct list_head *entry)
+{
+	__list_del(entry->prev, entry->next);
+}
+
+static inline void list_del(struct list_head *entry)
+{
+	__list_del(entry->prev, entry->next);
+	entry->next = LIST_POISON1;
+	entry->prev = LIST_POISON2;
+}
+
+/**
+ * list_entry - get the struct for this entry
+ * @ptr:	the &struct list_head pointer.
+ * @type:	the type of the struct this is embedded in.
+ * @member:	the name of the list_struct within the struct.
+ */
+#define list_entry(ptr, type, member) \
+	container_of(ptr, type, member)
+/**
+ * list_for_each	-	iterate over a list
+ * @pos:	the &struct list_head to use as a loop cursor.
+ * @head:	the head for your list.
+ */
+#define list_for_each(pos, head) \
+	for (pos = (head)->next; pos != (head); pos = pos->next)
+
+/**
+ * list_for_each_safe - iterate over a list safe against removal of list entry
+ * @pos:	the &struct list_head to use as a loop cursor.
+ * @n:		another &struct list_head to use as temporary storage
+ * @head:	the head for your list.
+ */
+#define list_for_each_safe(pos, n, head) \
+	for (pos = (head)->next, n = pos->next; pos != (head); \
+		pos = n, n = pos->next)
+
+#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
+
+/**
+ * container_of - cast a member of a structure out to the containing structure
+ * @ptr:	the pointer to the member.
+ * @type:	the type of the container struct this is embedded in.
+ * @member:	the name of the member within the struct.
+ *
+ */
+#define container_of(ptr, type, member) ({			\
+	const typeof( ((type *)0)->member ) *__mptr = (ptr);	\
+	(type *)( (char *)__mptr - offsetof(type,member) );})
+
+#endif
diff --git a/tools/usb/usbip/libsrc/names.c b/tools/usb/usbip/libsrc/names.c
new file mode 100644
index 000000000000..81ff8522405c
--- /dev/null
+++ b/tools/usb/usbip/libsrc/names.c
@@ -0,0 +1,504 @@
+/*
+ *      names.c  --  USB name database manipulation routines
+ *
+ *      Copyright (C) 1999, 2000  Thomas Sailer (sailer@ife.ee.ethz.ch)
+ *
+ *      This program is free software; you can redistribute it and/or modify
+ *      it under the terms of the GNU General Public License as published by
+ *      the Free Software Foundation; either version 2 of the License, or
+ *      (at your option) any later version.
+ *
+ *      This program is distributed in the hope that it will be useful,
+ *      but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *      GNU General Public License for more details.
+ *
+ *      You should have received a copy of the GNU General Public License
+ *      along with this program; if not, write to the Free Software
+ *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ *
+ *
+ *
+ *	Copyright (C) 2005 Takahiro Hirofuchi
+ *		- names_deinit() is added.
+ *
+ */
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <dirent.h>
+#include <string.h>
+#include <errno.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <ctype.h>
+
+#include "names.h"
+#include "usbip_common.h"
+
+struct vendor {
+	struct vendor *next;
+	u_int16_t vendorid;
+	char name[1];
+};
+
+struct product {
+	struct product *next;
+	u_int16_t vendorid, productid;
+	char name[1];
+};
+
+struct class {
+	struct class *next;
+	u_int8_t classid;
+	char name[1];
+};
+
+struct subclass {
+	struct subclass *next;
+	u_int8_t classid, subclassid;
+	char name[1];
+};
+
+struct protocol {
+	struct protocol *next;
+	u_int8_t classid, subclassid, protocolid;
+	char name[1];
+};
+
+struct genericstrtable {
+	struct genericstrtable *next;
+	unsigned int num;
+	char name[1];
+};
+
+
+#define HASH1  0x10
+#define HASH2  0x02
+#define HASHSZ 16
+
+static unsigned int hashnum(unsigned int num)
+{
+	unsigned int mask1 = HASH1 << 27, mask2 = HASH2 << 27;
+
+	for (; mask1 >= HASH1; mask1 >>= 1, mask2 >>= 1)
+		if (num & mask1)
+			num ^= mask2;
+	return num & (HASHSZ-1);
+}
+
+
+static struct vendor *vendors[HASHSZ] = { NULL, };
+static struct product *products[HASHSZ] = { NULL, };
+static struct class *classes[HASHSZ] = { NULL, };
+static struct subclass *subclasses[HASHSZ] = { NULL, };
+static struct protocol *protocols[HASHSZ] = { NULL, };
+
+const char *names_vendor(u_int16_t vendorid)
+{
+	struct vendor *v;
+
+	v = vendors[hashnum(vendorid)];
+	for (; v; v = v->next)
+		if (v->vendorid == vendorid)
+			return v->name;
+	return NULL;
+}
+
+const char *names_product(u_int16_t vendorid, u_int16_t productid)
+{
+	struct product *p;
+
+	p = products[hashnum((vendorid << 16) | productid)];
+	for (; p; p = p->next)
+		if (p->vendorid == vendorid && p->productid == productid)
+			return p->name;
+	return NULL;
+}
+
+const char *names_class(u_int8_t classid)
+{
+	struct class *c;
+
+	c = classes[hashnum(classid)];
+	for (; c; c = c->next)
+		if (c->classid == classid)
+			return c->name;
+	return NULL;
+}
+
+const char *names_subclass(u_int8_t classid, u_int8_t subclassid)
+{
+	struct subclass *s;
+
+	s = subclasses[hashnum((classid << 8) | subclassid)];
+	for (; s; s = s->next)
+		if (s->classid == classid && s->subclassid == subclassid)
+			return s->name;
+	return NULL;
+}
+
+const char *names_protocol(u_int8_t classid, u_int8_t subclassid,
+			   u_int8_t protocolid)
+{
+	struct protocol *p;
+
+	p = protocols[hashnum((classid << 16) | (subclassid << 8)
+			      | protocolid)];
+	for (; p; p = p->next)
+		if (p->classid == classid && p->subclassid == subclassid &&
+		    p->protocolid == protocolid)
+			return p->name;
+	return NULL;
+}
+
+/* add a cleanup function by takahiro */
+struct pool {
+	struct pool *next;
+	void *mem;
+};
+
+static struct pool *pool_head;
+
+static void *my_malloc(size_t size)
+{
+	struct pool *p;
+
+	p = calloc(1, sizeof(struct pool));
+	if (!p)
+		return NULL;
+
+	p->mem = calloc(1, size);
+	if (!p->mem) {
+		free(p);
+		return NULL;
+	}
+
+	p->next = pool_head;
+	pool_head = p;
+
+	return p->mem;
+}
+
+void names_free(void)
+{
+	struct pool *pool;
+
+	if (!pool_head)
+		return;
+
+	for (pool = pool_head; pool != NULL; ) {
+		struct pool *tmp;
+
+		if (pool->mem)
+			free(pool->mem);
+
+		tmp = pool;
+		pool = pool->next;
+		free(tmp);
+	}
+}
+
+static int new_vendor(const char *name, u_int16_t vendorid)
+{
+	struct vendor *v;
+	unsigned int h = hashnum(vendorid);
+
+	v = vendors[h];
+	for (; v; v = v->next)
+		if (v->vendorid == vendorid)
+			return -1;
+	v = my_malloc(sizeof(struct vendor) + strlen(name));
+	if (!v)
+		return -1;
+	strcpy(v->name, name);
+	v->vendorid = vendorid;
+	v->next = vendors[h];
+	vendors[h] = v;
+	return 0;
+}
+
+static int new_product(const char *name, u_int16_t vendorid,
+		       u_int16_t productid)
+{
+	struct product *p;
+	unsigned int h = hashnum((vendorid << 16) | productid);
+
+	p = products[h];
+	for (; p; p = p->next)
+		if (p->vendorid == vendorid && p->productid == productid)
+			return -1;
+	p = my_malloc(sizeof(struct product) + strlen(name));
+	if (!p)
+		return -1;
+	strcpy(p->name, name);
+	p->vendorid = vendorid;
+	p->productid = productid;
+	p->next = products[h];
+	products[h] = p;
+	return 0;
+}
+
+static int new_class(const char *name, u_int8_t classid)
+{
+	struct class *c;
+	unsigned int h = hashnum(classid);
+
+	c = classes[h];
+	for (; c; c = c->next)
+		if (c->classid == classid)
+			return -1;
+	c = my_malloc(sizeof(struct class) + strlen(name));
+	if (!c)
+		return -1;
+	strcpy(c->name, name);
+	c->classid = classid;
+	c->next = classes[h];
+	classes[h] = c;
+	return 0;
+}
+
+static int new_subclass(const char *name, u_int8_t classid, u_int8_t subclassid)
+{
+	struct subclass *s;
+	unsigned int h = hashnum((classid << 8) | subclassid);
+
+	s = subclasses[h];
+	for (; s; s = s->next)
+		if (s->classid == classid && s->subclassid == subclassid)
+			return -1;
+	s = my_malloc(sizeof(struct subclass) + strlen(name));
+	if (!s)
+		return -1;
+	strcpy(s->name, name);
+	s->classid = classid;
+	s->subclassid = subclassid;
+	s->next = subclasses[h];
+	subclasses[h] = s;
+	return 0;
+}
+
+static int new_protocol(const char *name, u_int8_t classid, u_int8_t subclassid,
+			u_int8_t protocolid)
+{
+	struct protocol *p;
+	unsigned int h = hashnum((classid << 16) | (subclassid << 8)
+				 | protocolid);
+
+	p = protocols[h];
+	for (; p; p = p->next)
+		if (p->classid == classid && p->subclassid == subclassid
+		    && p->protocolid == protocolid)
+			return -1;
+	p = my_malloc(sizeof(struct protocol) + strlen(name));
+	if (!p)
+		return -1;
+	strcpy(p->name, name);
+	p->classid = classid;
+	p->subclassid = subclassid;
+	p->protocolid = protocolid;
+	p->next = protocols[h];
+	protocols[h] = p;
+	return 0;
+}
+
+static void parse(FILE *f)
+{
+	char buf[512], *cp;
+	unsigned int linectr = 0;
+	int lastvendor = -1;
+	int lastclass = -1;
+	int lastsubclass = -1;
+	int lasthut = -1;
+	int lastlang = -1;
+	unsigned int u;
+
+	while (fgets(buf, sizeof(buf), f)) {
+		linectr++;
+		/* remove line ends */
+		cp = strchr(buf, '\r');
+		if (cp)
+			*cp = 0;
+		cp = strchr(buf, '\n');
+		if (cp)
+			*cp = 0;
+		if (buf[0] == '#' || !buf[0])
+			continue;
+		cp = buf;
+		if (buf[0] == 'P' && buf[1] == 'H' && buf[2] == 'Y' &&
+		    buf[3] == 'S' && buf[4] == 'D' &&
+		    buf[5] == 'E' && buf[6] == 'S' && /*isspace(buf[7])*/
+		    buf[7] == ' ') {
+			continue;
+		}
+		if (buf[0] == 'P' && buf[1] == 'H' &&
+		    buf[2] == 'Y' && /*isspace(buf[3])*/ buf[3] == ' ') {
+			continue;
+		}
+		if (buf[0] == 'B' && buf[1] == 'I' && buf[2] == 'A' &&
+		    buf[3] == 'S' && /*isspace(buf[4])*/ buf[4] == ' ') {
+			continue;
+		}
+		if (buf[0] == 'L' && /*isspace(buf[1])*/ buf[1] == ' ') {
+			lasthut = lastclass = lastvendor = lastsubclass = -1;
+			/*
+			 * set 1 as pseudo-id to indicate that the parser is
+			 * in a `L' section.
+			 */
+			lastlang = 1;
+			continue;
+		}
+		if (buf[0] == 'C' && /*isspace(buf[1])*/ buf[1] == ' ') {
+			/* class spec */
+			cp = buf+2;
+			while (isspace(*cp))
+				cp++;
+			if (!isxdigit(*cp)) {
+				err("Invalid class spec at line %u", linectr);
+				continue;
+			}
+			u = strtoul(cp, &cp, 16);
+			while (isspace(*cp))
+				cp++;
+			if (!*cp) {
+				err("Invalid class spec at line %u", linectr);
+				continue;
+			}
+			if (new_class(cp, u))
+				err("Duplicate class spec at line %u class %04x %s",
+				    linectr, u, cp);
+			dbg("line %5u class %02x %s", linectr, u, cp);
+			lasthut = lastlang = lastvendor = lastsubclass = -1;
+			lastclass = u;
+			continue;
+		}
+		if (buf[0] == 'A' && buf[1] == 'T' && isspace(buf[2])) {
+			/* audio terminal type spec */
+			continue;
+		}
+		if (buf[0] == 'H' && buf[1] == 'C' && buf[2] == 'C'
+		    && isspace(buf[3])) {
+			/* HID Descriptor bCountryCode */
+			continue;
+		}
+		if (isxdigit(*cp)) {
+			/* vendor */
+			u = strtoul(cp, &cp, 16);
+			while (isspace(*cp))
+				cp++;
+			if (!*cp) {
+				err("Invalid vendor spec at line %u", linectr);
+				continue;
+			}
+			if (new_vendor(cp, u))
+				err("Duplicate vendor spec at line %u vendor %04x %s",
+				    linectr, u, cp);
+			dbg("line %5u vendor %04x %s", linectr, u, cp);
+			lastvendor = u;
+			lasthut = lastlang = lastclass = lastsubclass = -1;
+			continue;
+		}
+		if (buf[0] == '\t' && isxdigit(buf[1])) {
+			/* product or subclass spec */
+			u = strtoul(buf+1, &cp, 16);
+			while (isspace(*cp))
+				cp++;
+			if (!*cp) {
+				err("Invalid product/subclass spec at line %u",
+				    linectr);
+				continue;
+			}
+			if (lastvendor != -1) {
+				if (new_product(cp, lastvendor, u))
+					err("Duplicate product spec at line %u product %04x:%04x %s",
+					    linectr, lastvendor, u, cp);
+				dbg("line %5u product %04x:%04x %s", linectr,
+				    lastvendor, u, cp);
+				continue;
+			}
+			if (lastclass != -1) {
+				if (new_subclass(cp, lastclass, u))
+					err("Duplicate subclass spec at line %u class %02x:%02x %s",
+					    linectr, lastclass, u, cp);
+				dbg("line %5u subclass %02x:%02x %s", linectr,
+				    lastclass, u, cp);
+				lastsubclass = u;
+				continue;
+			}
+			if (lasthut != -1) {
+				/* do not store hut */
+				continue;
+			}
+			if (lastlang != -1) {
+				/* do not store langid */
+				continue;
+			}
+			err("Product/Subclass spec without prior Vendor/Class spec at line %u",
+			    linectr);
+			continue;
+		}
+		if (buf[0] == '\t' && buf[1] == '\t' && isxdigit(buf[2])) {
+			/* protocol spec */
+			u = strtoul(buf+2, &cp, 16);
+			while (isspace(*cp))
+				cp++;
+			if (!*cp) {
+				err("Invalid protocol spec at line %u",
+				    linectr);
+				continue;
+			}
+			if (lastclass != -1 && lastsubclass != -1) {
+				if (new_protocol(cp, lastclass, lastsubclass,
+						 u))
+					err("Duplicate protocol spec at line %u class %02x:%02x:%02x %s",
+					    linectr, lastclass, lastsubclass,
+					    u, cp);
+				dbg("line %5u protocol %02x:%02x:%02x %s",
+				    linectr, lastclass, lastsubclass, u, cp);
+				continue;
+			}
+			err("Protocol spec without prior Class and Subclass spec at line %u",
+			    linectr);
+			continue;
+		}
+		if (buf[0] == 'H' && buf[1] == 'I' &&
+		    buf[2] == 'D' && /*isspace(buf[3])*/ buf[3] == ' ') {
+			continue;
+		}
+		if (buf[0] == 'H' && buf[1] == 'U' &&
+		    buf[2] == 'T' && /*isspace(buf[3])*/ buf[3] == ' ') {
+			lastlang = lastclass = lastvendor = lastsubclass = -1;
+			/*
+			 * set 1 as pseudo-id to indicate that the parser is
+			 * in a `HUT' section.
+			 */
+			lasthut = 1;
+			continue;
+		}
+		if (buf[0] == 'R' && buf[1] == ' ')
+			continue;
+
+		if (buf[0] == 'V' && buf[1] == 'T')
+			continue;
+
+		err("Unknown line at line %u", linectr);
+	}
+}
+
+
+int names_init(char *n)
+{
+	FILE *f;
+
+	f = fopen(n, "r");
+	if (!f)
+		return errno;
+
+	parse(f);
+	fclose(f);
+	return 0;
+}
diff --git a/tools/usb/usbip/libsrc/names.h b/tools/usb/usbip/libsrc/names.h
new file mode 100644
index 000000000000..680926512de2
--- /dev/null
+++ b/tools/usb/usbip/libsrc/names.h
@@ -0,0 +1,41 @@
+/*
+ *      names.h  --  USB name database manipulation routines
+ *
+ *      Copyright (C) 1999, 2000  Thomas Sailer (sailer@ife.ee.ethz.ch)
+ *
+ *      This program is free software; you can redistribute it and/or modify
+ *      it under the terms of the GNU General Public License as published by
+ *      the Free Software Foundation; either version 2 of the License, or
+ *      (at your option) any later version.
+ *
+ *      This program is distributed in the hope that it will be useful,
+ *      but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *      GNU General Public License for more details.
+ *
+ *      You should have received a copy of the GNU General Public License
+ *      along with this program; if not, write to the Free Software
+ *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ *
+ *	Copyright (C) 2005 Takahiro Hirofuchi
+ *	       - names_free() is added.
+ */
+
+#ifndef _NAMES_H
+#define _NAMES_H
+
+#include <sys/types.h>
+
+/* used by usbip_common.c */
+extern const char *names_vendor(u_int16_t vendorid);
+extern const char *names_product(u_int16_t vendorid, u_int16_t productid);
+extern const char *names_class(u_int8_t classid);
+extern const char *names_subclass(u_int8_t classid, u_int8_t subclassid);
+extern const char *names_protocol(u_int8_t classid, u_int8_t subclassid,
+				  u_int8_t protocolid);
+extern int  names_init(char *n);
+extern void names_free(void);
+
+#endif /* _NAMES_H */
diff --git a/tools/usb/usbip/libsrc/sysfs_utils.c b/tools/usb/usbip/libsrc/sysfs_utils.c
new file mode 100644
index 000000000000..36ac88ece0b8
--- /dev/null
+++ b/tools/usb/usbip/libsrc/sysfs_utils.c
@@ -0,0 +1,31 @@
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <errno.h>
+
+#include "sysfs_utils.h"
+#include "usbip_common.h"
+
+int write_sysfs_attribute(const char *attr_path, const char *new_value,
+			  size_t len)
+{
+	int fd;
+	int length;
+
+	fd = open(attr_path, O_WRONLY);
+	if (fd < 0) {
+		dbg("error opening attribute %s", attr_path);
+		return -1;
+	}
+
+	length = write(fd, new_value, len);
+	if (length < 0) {
+		dbg("error writing to attribute %s", attr_path);
+		close(fd);
+		return -1;
+	}
+
+	close(fd);
+
+	return 0;
+}
diff --git a/tools/usb/usbip/libsrc/sysfs_utils.h b/tools/usb/usbip/libsrc/sysfs_utils.h
new file mode 100644
index 000000000000..32ac1d105d18
--- /dev/null
+++ b/tools/usb/usbip/libsrc/sysfs_utils.h
@@ -0,0 +1,8 @@
+
+#ifndef __SYSFS_UTILS_H
+#define __SYSFS_UTILS_H
+
+int write_sysfs_attribute(const char *attr_path, const char *new_value,
+			  size_t len);
+
+#endif
diff --git a/tools/usb/usbip/libsrc/usbip_common.c b/tools/usb/usbip/libsrc/usbip_common.c
new file mode 100644
index 000000000000..ac73710473de
--- /dev/null
+++ b/tools/usb/usbip/libsrc/usbip_common.c
@@ -0,0 +1,285 @@
+/*
+ * Copyright (C) 2005-2007 Takahiro Hirofuchi
+ */
+
+#include <libudev.h>
+#include "usbip_common.h"
+#include "names.h"
+
+#undef  PROGNAME
+#define PROGNAME "libusbip"
+
+int usbip_use_syslog;
+int usbip_use_stderr;
+int usbip_use_debug;
+
+extern struct udev *udev_context;
+
+struct speed_string {
+	int num;
+	char *speed;
+	char *desc;
+};
+
+static const struct speed_string speed_strings[] = {
+	{ USB_SPEED_UNKNOWN, "unknown", "Unknown Speed"},
+	{ USB_SPEED_LOW,  "1.5", "Low Speed(1.5Mbps)"  },
+	{ USB_SPEED_FULL, "12",  "Full Speed(12Mbps)" },
+	{ USB_SPEED_HIGH, "480", "High Speed(480Mbps)" },
+	{ USB_SPEED_WIRELESS, "53.3-480", "Wireless"},
+	{ USB_SPEED_SUPER, "5000", "Super Speed(5000Mbps)" },
+	{ 0, NULL, NULL }
+};
+
+struct portst_string {
+	int num;
+	char *desc;
+};
+
+static struct portst_string portst_strings[] = {
+	{ SDEV_ST_AVAILABLE,	"Device Available" },
+	{ SDEV_ST_USED,		"Device in Use" },
+	{ SDEV_ST_ERROR,	"Device Error"},
+	{ VDEV_ST_NULL,		"Port Available"},
+	{ VDEV_ST_NOTASSIGNED,	"Port Initializing"},
+	{ VDEV_ST_USED,		"Port in Use"},
+	{ VDEV_ST_ERROR,	"Port Error"},
+	{ 0, NULL}
+};
+
+const char *usbip_status_string(int32_t status)
+{
+	for (int i = 0; portst_strings[i].desc != NULL; i++)
+		if (portst_strings[i].num == status)
+			return portst_strings[i].desc;
+
+	return "Unknown Status";
+}
+
+const char *usbip_speed_string(int num)
+{
+	for (int i = 0; speed_strings[i].speed != NULL; i++)
+		if (speed_strings[i].num == num)
+			return speed_strings[i].desc;
+
+	return "Unknown Speed";
+}
+
+
+#define DBG_UDEV_INTEGER(name)\
+	dbg("%-20s = %x", to_string(name), (int) udev->name)
+
+#define DBG_UINF_INTEGER(name)\
+	dbg("%-20s = %x", to_string(name), (int) uinf->name)
+
+void dump_usb_interface(struct usbip_usb_interface *uinf)
+{
+	char buff[100];
+
+	usbip_names_get_class(buff, sizeof(buff),
+			uinf->bInterfaceClass,
+			uinf->bInterfaceSubClass,
+			uinf->bInterfaceProtocol);
+	dbg("%-20s = %s", "Interface(C/SC/P)", buff);
+}
+
+void dump_usb_device(struct usbip_usb_device *udev)
+{
+	char buff[100];
+
+	dbg("%-20s = %s", "path",  udev->path);
+	dbg("%-20s = %s", "busid", udev->busid);
+
+	usbip_names_get_class(buff, sizeof(buff),
+			udev->bDeviceClass,
+			udev->bDeviceSubClass,
+			udev->bDeviceProtocol);
+	dbg("%-20s = %s", "Device(C/SC/P)", buff);
+
+	DBG_UDEV_INTEGER(bcdDevice);
+
+	usbip_names_get_product(buff, sizeof(buff),
+			udev->idVendor,
+			udev->idProduct);
+	dbg("%-20s = %s", "Vendor/Product", buff);
+
+	DBG_UDEV_INTEGER(bNumConfigurations);
+	DBG_UDEV_INTEGER(bNumInterfaces);
+
+	dbg("%-20s = %s", "speed",
+			usbip_speed_string(udev->speed));
+
+	DBG_UDEV_INTEGER(busnum);
+	DBG_UDEV_INTEGER(devnum);
+}
+
+
+int read_attr_value(struct udev_device *dev, const char *name,
+		    const char *format)
+{
+	const char *attr;
+	int num = 0;
+	int ret;
+
+	attr = udev_device_get_sysattr_value(dev, name);
+	if (!attr) {
+		err("udev_device_get_sysattr_value failed");
+		goto err;
+	}
+
+	/* The client chooses the device configuration
+	 * when attaching it so right after being bound
+	 * to usbip-host on the server the device will
+	 * have no configuration.
+	 * Therefore, attributes such as bConfigurationValue
+	 * and bNumInterfaces will not exist and sscanf will
+	 * fail. Check for these cases and don't treat them
+	 * as errors.
+	 */
+
+	ret = sscanf(attr, format, &num);
+	if (ret < 1) {
+		if (strcmp(name, "bConfigurationValue") &&
+				strcmp(name, "bNumInterfaces")) {
+			err("sscanf failed for attribute %s", name);
+			goto err;
+		}
+	}
+
+err:
+
+	return num;
+}
+
+
+int read_attr_speed(struct udev_device *dev)
+{
+	const char *speed;
+
+	speed = udev_device_get_sysattr_value(dev, "speed");
+	if (!speed) {
+		err("udev_device_get_sysattr_value failed");
+		goto err;
+	}
+
+	for (int i = 0; speed_strings[i].speed != NULL; i++) {
+		if (!strcmp(speed, speed_strings[i].speed))
+			return speed_strings[i].num;
+	}
+
+err:
+
+	return USB_SPEED_UNKNOWN;
+}
+
+#define READ_ATTR(object, type, dev, name, format)			      \
+	do {								      \
+		(object)->name = (type) read_attr_value(dev, to_string(name), \
+							format);	      \
+	} while (0)
+
+
+int read_usb_device(struct udev_device *sdev, struct usbip_usb_device *udev)
+{
+	uint32_t busnum, devnum;
+	const char *path, *name;
+
+	READ_ATTR(udev, uint8_t,  sdev, bDeviceClass,		"%02x\n");
+	READ_ATTR(udev, uint8_t,  sdev, bDeviceSubClass,	"%02x\n");
+	READ_ATTR(udev, uint8_t,  sdev, bDeviceProtocol,	"%02x\n");
+
+	READ_ATTR(udev, uint16_t, sdev, idVendor,		"%04x\n");
+	READ_ATTR(udev, uint16_t, sdev, idProduct,		"%04x\n");
+	READ_ATTR(udev, uint16_t, sdev, bcdDevice,		"%04x\n");
+
+	READ_ATTR(udev, uint8_t,  sdev, bConfigurationValue,	"%02x\n");
+	READ_ATTR(udev, uint8_t,  sdev, bNumConfigurations,	"%02x\n");
+	READ_ATTR(udev, uint8_t,  sdev, bNumInterfaces,		"%02x\n");
+
+	READ_ATTR(udev, uint8_t,  sdev, devnum,			"%d\n");
+	udev->speed = read_attr_speed(sdev);
+
+	path = udev_device_get_syspath(sdev);
+	name = udev_device_get_sysname(sdev);
+
+	strncpy(udev->path,  path,  SYSFS_PATH_MAX);
+	strncpy(udev->busid, name, SYSFS_BUS_ID_SIZE);
+
+	sscanf(name, "%u-%u", &busnum, &devnum);
+	udev->busnum = busnum;
+
+	return 0;
+}
+
+int read_usb_interface(struct usbip_usb_device *udev, int i,
+		       struct usbip_usb_interface *uinf)
+{
+	char busid[SYSFS_BUS_ID_SIZE];
+	struct udev_device *sif;
+
+	sprintf(busid, "%s:%d.%d", udev->busid, udev->bConfigurationValue, i);
+
+	sif = udev_device_new_from_subsystem_sysname(udev_context, "usb", busid);
+	if (!sif) {
+		err("udev_device_new_from_subsystem_sysname %s failed", busid);
+		return -1;
+	}
+
+	READ_ATTR(uinf, uint8_t,  sif, bInterfaceClass,		"%02x\n");
+	READ_ATTR(uinf, uint8_t,  sif, bInterfaceSubClass,	"%02x\n");
+	READ_ATTR(uinf, uint8_t,  sif, bInterfaceProtocol,	"%02x\n");
+
+	return 0;
+}
+
+int usbip_names_init(char *f)
+{
+	return names_init(f);
+}
+
+void usbip_names_free(void)
+{
+	names_free();
+}
+
+void usbip_names_get_product(char *buff, size_t size, uint16_t vendor,
+			     uint16_t product)
+{
+	const char *prod, *vend;
+
+	prod = names_product(vendor, product);
+	if (!prod)
+		prod = "unknown product";
+
+
+	vend = names_vendor(vendor);
+	if (!vend)
+		vend = "unknown vendor";
+
+	snprintf(buff, size, "%s : %s (%04x:%04x)", vend, prod, vendor, product);
+}
+
+void usbip_names_get_class(char *buff, size_t size, uint8_t class,
+			   uint8_t subclass, uint8_t protocol)
+{
+	const char *c, *s, *p;
+
+	if (class == 0 && subclass == 0 && protocol == 0) {
+		snprintf(buff, size, "(Defined at Interface level) (%02x/%02x/%02x)", class, subclass, protocol);
+		return;
+	}
+
+	p = names_protocol(class, subclass, protocol);
+	if (!p)
+		p = "unknown protocol";
+
+	s = names_subclass(class, subclass);
+	if (!s)
+		s = "unknown subclass";
+
+	c = names_class(class);
+	if (!c)
+		c = "unknown class";
+
+	snprintf(buff, size, "%s / %s / %s (%02x/%02x/%02x)", c, s, p, class, subclass, protocol);
+}
diff --git a/tools/usb/usbip/libsrc/usbip_common.h b/tools/usb/usbip/libsrc/usbip_common.h
new file mode 100644
index 000000000000..5a0e95edf4df
--- /dev/null
+++ b/tools/usb/usbip/libsrc/usbip_common.h
@@ -0,0 +1,137 @@
+/*
+ * Copyright (C) 2005-2007 Takahiro Hirofuchi
+ */
+
+#ifndef __USBIP_COMMON_H
+#define __USBIP_COMMON_H
+
+#include <libudev.h>
+
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <syslog.h>
+#include <unistd.h>
+#include <linux/usb/ch9.h>
+#include "../../uapi/usbip.h"
+
+#ifndef USBIDS_FILE
+#define USBIDS_FILE "/usr/share/hwdata/usb.ids"
+#endif
+
+#ifndef VHCI_STATE_PATH
+#define VHCI_STATE_PATH "/var/run/vhci_hcd"
+#endif
+
+/* kernel module names */
+#define USBIP_CORE_MOD_NAME	"usbip-core"
+#define USBIP_HOST_DRV_NAME	"usbip-host"
+#define USBIP_VHCI_DRV_NAME	"vhci_hcd"
+
+/* sysfs constants */
+#define SYSFS_MNT_PATH         "/sys"
+#define SYSFS_BUS_NAME         "bus"
+#define SYSFS_BUS_TYPE         "usb"
+#define SYSFS_DRIVERS_NAME     "drivers"
+
+#define SYSFS_PATH_MAX		256
+#define SYSFS_BUS_ID_SIZE	32
+
+extern int usbip_use_syslog;
+extern int usbip_use_stderr;
+extern int usbip_use_debug ;
+
+#define PROGNAME "usbip"
+
+#define pr_fmt(fmt)	"%s: %s: " fmt "\n", PROGNAME
+#define dbg_fmt(fmt)	pr_fmt("%s:%d:[%s] " fmt), "debug",	\
+		        __FILE__, __LINE__, __func__
+
+#define err(fmt, args...)						\
+	do {								\
+		if (usbip_use_syslog) {					\
+			syslog(LOG_ERR, pr_fmt(fmt), "error", ##args);	\
+		}							\
+		if (usbip_use_stderr) {					\
+			fprintf(stderr, pr_fmt(fmt), "error", ##args);	\
+		}							\
+	} while (0)
+
+#define info(fmt, args...)						\
+	do {								\
+		if (usbip_use_syslog) {					\
+			syslog(LOG_INFO, pr_fmt(fmt), "info", ##args);	\
+		}							\
+		if (usbip_use_stderr) {					\
+			fprintf(stderr, pr_fmt(fmt), "info", ##args);	\
+		}							\
+	} while (0)
+
+#define dbg(fmt, args...)						\
+	do {								\
+	if (usbip_use_debug) {						\
+		if (usbip_use_syslog) {					\
+			syslog(LOG_DEBUG, dbg_fmt(fmt), ##args);	\
+		}							\
+		if (usbip_use_stderr) {					\
+			fprintf(stderr, dbg_fmt(fmt), ##args);		\
+		}							\
+	}								\
+	} while (0)
+
+#define BUG()						\
+	do {						\
+		err("sorry, it's a bug!");		\
+		abort();				\
+	} while (0)
+
+struct usbip_usb_interface {
+	uint8_t bInterfaceClass;
+	uint8_t bInterfaceSubClass;
+	uint8_t bInterfaceProtocol;
+	uint8_t padding;	/* alignment */
+} __attribute__((packed));
+
+struct usbip_usb_device {
+	char path[SYSFS_PATH_MAX];
+	char busid[SYSFS_BUS_ID_SIZE];
+
+	uint32_t busnum;
+	uint32_t devnum;
+	uint32_t speed;
+
+	uint16_t idVendor;
+	uint16_t idProduct;
+	uint16_t bcdDevice;
+
+	uint8_t bDeviceClass;
+	uint8_t bDeviceSubClass;
+	uint8_t bDeviceProtocol;
+	uint8_t bConfigurationValue;
+	uint8_t bNumConfigurations;
+	uint8_t bNumInterfaces;
+} __attribute__((packed));
+
+#define to_string(s)	#s
+
+void dump_usb_interface(struct usbip_usb_interface *);
+void dump_usb_device(struct usbip_usb_device *);
+int read_usb_device(struct udev_device *sdev, struct usbip_usb_device *udev);
+int read_attr_value(struct udev_device *dev, const char *name,
+		    const char *format);
+int read_usb_interface(struct usbip_usb_device *udev, int i,
+		       struct usbip_usb_interface *uinf);
+
+const char *usbip_speed_string(int num);
+const char *usbip_status_string(int32_t status);
+
+int usbip_names_init(char *);
+void usbip_names_free(void);
+void usbip_names_get_product(char *buff, size_t size, uint16_t vendor,
+			     uint16_t product);
+void usbip_names_get_class(char *buff, size_t size, uint8_t class,
+			   uint8_t subclass, uint8_t protocol);
+
+#endif /* __USBIP_COMMON_H */
diff --git a/tools/usb/usbip/libsrc/usbip_host_driver.c b/tools/usb/usbip/libsrc/usbip_host_driver.c
new file mode 100644
index 000000000000..bef08d5c44e8
--- /dev/null
+++ b/tools/usb/usbip/libsrc/usbip_host_driver.c
@@ -0,0 +1,280 @@
+/*
+ * Copyright (C) 2011 matt mooney <mfm@muteddisk.com>
+ *               2005-2007 Takahiro Hirofuchi
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+
+#include <errno.h>
+#include <unistd.h>
+
+#include <libudev.h>
+
+#include "usbip_common.h"
+#include "usbip_host_driver.h"
+#include "list.h"
+#include "sysfs_utils.h"
+
+#undef  PROGNAME
+#define PROGNAME "libusbip"
+
+struct usbip_host_driver *host_driver;
+struct udev *udev_context;
+
+static int32_t read_attr_usbip_status(struct usbip_usb_device *udev)
+{
+	char status_attr_path[SYSFS_PATH_MAX];
+	int fd;
+	int length;
+	char status;
+	int value = 0;
+
+	snprintf(status_attr_path, SYSFS_PATH_MAX, "%s/usbip_status",
+		 udev->path);
+
+	fd = open(status_attr_path, O_RDONLY);
+	if (fd < 0) {
+		err("error opening attribute %s", status_attr_path);
+		return -1;
+	}
+
+	length = read(fd, &status, 1);
+	if (length < 0) {
+		err("error reading attribute %s", status_attr_path);
+		close(fd);
+		return -1;
+	}
+
+	value = atoi(&status);
+
+	return value;
+}
+
+static
+struct usbip_exported_device *usbip_exported_device_new(const char *sdevpath)
+{
+	struct usbip_exported_device *edev = NULL;
+	struct usbip_exported_device *edev_old;
+	size_t size;
+	int i;
+
+	edev = calloc(1, sizeof(struct usbip_exported_device));
+
+	edev->sudev = udev_device_new_from_syspath(udev_context, sdevpath);
+	if (!edev->sudev) {
+		err("udev_device_new_from_syspath: %s", sdevpath);
+		goto err;
+	}
+
+	read_usb_device(edev->sudev, &edev->udev);
+
+	edev->status = read_attr_usbip_status(&edev->udev);
+	if (edev->status < 0)
+		goto err;
+
+	/* reallocate buffer to include usb interface data */
+	size = sizeof(struct usbip_exported_device) +
+		edev->udev.bNumInterfaces * sizeof(struct usbip_usb_interface);
+
+	edev_old = edev;
+	edev = realloc(edev, size);
+	if (!edev) {
+		edev = edev_old;
+		dbg("realloc failed");
+		goto err;
+	}
+
+	for (i = 0; i < edev->udev.bNumInterfaces; i++)
+		read_usb_interface(&edev->udev, i, &edev->uinf[i]);
+
+	return edev;
+err:
+	if (edev->sudev)
+		udev_device_unref(edev->sudev);
+	if (edev)
+		free(edev);
+
+	return NULL;
+}
+
+static int refresh_exported_devices(void)
+{
+	struct usbip_exported_device *edev;
+	struct udev_enumerate *enumerate;
+	struct udev_list_entry *devices, *dev_list_entry;
+	struct udev_device *dev;
+	const char *path;
+	const char *driver;
+
+	enumerate = udev_enumerate_new(udev_context);
+	udev_enumerate_add_match_subsystem(enumerate, "usb");
+	udev_enumerate_scan_devices(enumerate);
+
+	devices = udev_enumerate_get_list_entry(enumerate);
+
+	udev_list_entry_foreach(dev_list_entry, devices) {
+		path = udev_list_entry_get_name(dev_list_entry);
+		dev = udev_device_new_from_syspath(udev_context, path);
+		if (dev == NULL)
+			continue;
+
+		/* Check whether device uses usbip-host driver. */
+		driver = udev_device_get_driver(dev);
+		if (driver != NULL && !strcmp(driver, USBIP_HOST_DRV_NAME)) {
+			edev = usbip_exported_device_new(path);
+			if (!edev) {
+				dbg("usbip_exported_device_new failed");
+				continue;
+			}
+
+			list_add(&edev->node, &host_driver->edev_list);
+			host_driver->ndevs++;
+		}
+	}
+
+	return 0;
+}
+
+static void usbip_exported_device_destroy(void)
+{
+	struct list_head *i, *tmp;
+	struct usbip_exported_device *edev;
+
+	list_for_each_safe(i, tmp, &host_driver->edev_list) {
+		edev = list_entry(i, struct usbip_exported_device, node);
+		list_del(i);
+		free(edev);
+	}
+}
+
+int usbip_host_driver_open(void)
+{
+	int rc;
+
+	udev_context = udev_new();
+	if (!udev_context) {
+		err("udev_new failed");
+		return -1;
+	}
+
+	host_driver = calloc(1, sizeof(*host_driver));
+
+	host_driver->ndevs = 0;
+	INIT_LIST_HEAD(&host_driver->edev_list);
+
+	rc = refresh_exported_devices();
+	if (rc < 0)
+		goto err_free_host_driver;
+
+	return 0;
+
+err_free_host_driver:
+	free(host_driver);
+	host_driver = NULL;
+
+	udev_unref(udev_context);
+
+	return -1;
+}
+
+void usbip_host_driver_close(void)
+{
+	if (!host_driver)
+		return;
+
+	usbip_exported_device_destroy();
+
+	free(host_driver);
+	host_driver = NULL;
+
+	udev_unref(udev_context);
+}
+
+int usbip_host_refresh_device_list(void)
+{
+	int rc;
+
+	usbip_exported_device_destroy();
+
+	host_driver->ndevs = 0;
+	INIT_LIST_HEAD(&host_driver->edev_list);
+
+	rc = refresh_exported_devices();
+	if (rc < 0)
+		return -1;
+
+	return 0;
+}
+
+int usbip_host_export_device(struct usbip_exported_device *edev, int sockfd)
+{
+	char attr_name[] = "usbip_sockfd";
+	char sockfd_attr_path[SYSFS_PATH_MAX];
+	char sockfd_buff[30];
+	int ret;
+
+	if (edev->status != SDEV_ST_AVAILABLE) {
+		dbg("device not available: %s", edev->udev.busid);
+		switch (edev->status) {
+		case SDEV_ST_ERROR:
+			dbg("status SDEV_ST_ERROR");
+			break;
+		case SDEV_ST_USED:
+			dbg("status SDEV_ST_USED");
+			break;
+		default:
+			dbg("status unknown: 0x%x", edev->status);
+		}
+		return -1;
+	}
+
+	/* only the first interface is true */
+	snprintf(sockfd_attr_path, sizeof(sockfd_attr_path), "%s/%s",
+		 edev->udev.path, attr_name);
+
+	snprintf(sockfd_buff, sizeof(sockfd_buff), "%d\n", sockfd);
+
+	ret = write_sysfs_attribute(sockfd_attr_path, sockfd_buff,
+				    strlen(sockfd_buff));
+	if (ret < 0) {
+		err("write_sysfs_attribute failed: sockfd %s to %s",
+		    sockfd_buff, sockfd_attr_path);
+		return ret;
+	}
+
+	info("connect: %s", edev->udev.busid);
+
+	return ret;
+}
+
+struct usbip_exported_device *usbip_host_get_device(int num)
+{
+	struct list_head *i;
+	struct usbip_exported_device *edev;
+	int cnt = 0;
+
+	list_for_each(i, &host_driver->edev_list) {
+		edev = list_entry(i, struct usbip_exported_device, node);
+		if (num == cnt)
+			return edev;
+		else
+			cnt++;
+	}
+
+	return NULL;
+}
diff --git a/tools/usb/usbip/libsrc/usbip_host_driver.h b/tools/usb/usbip/libsrc/usbip_host_driver.h
new file mode 100644
index 000000000000..2a31f855c616
--- /dev/null
+++ b/tools/usb/usbip/libsrc/usbip_host_driver.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2011 matt mooney <mfm@muteddisk.com>
+ *               2005-2007 Takahiro Hirofuchi
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __USBIP_HOST_DRIVER_H
+#define __USBIP_HOST_DRIVER_H
+
+#include <stdint.h>
+#include "usbip_common.h"
+#include "list.h"
+
+struct usbip_host_driver {
+	int ndevs;
+	/* list of exported device */
+	struct list_head edev_list;
+};
+
+struct usbip_exported_device {
+	struct udev_device *sudev;
+	int32_t status;
+	struct usbip_usb_device udev;
+	struct list_head node;
+	struct usbip_usb_interface uinf[];
+};
+
+extern struct usbip_host_driver *host_driver;
+
+int usbip_host_driver_open(void);
+void usbip_host_driver_close(void);
+
+int usbip_host_refresh_device_list(void);
+int usbip_host_export_device(struct usbip_exported_device *edev, int sockfd);
+struct usbip_exported_device *usbip_host_get_device(int num);
+
+#endif /* __USBIP_HOST_DRIVER_H */
diff --git a/tools/usb/usbip/libsrc/vhci_driver.c b/tools/usb/usbip/libsrc/vhci_driver.c
new file mode 100644
index 000000000000..ad9204773533
--- /dev/null
+++ b/tools/usb/usbip/libsrc/vhci_driver.c
@@ -0,0 +1,411 @@
+/*
+ * Copyright (C) 2005-2007 Takahiro Hirofuchi
+ */
+
+#include "usbip_common.h"
+#include "vhci_driver.h"
+#include <limits.h>
+#include <netdb.h>
+#include <libudev.h>
+#include "sysfs_utils.h"
+
+#undef  PROGNAME
+#define PROGNAME "libusbip"
+
+struct usbip_vhci_driver *vhci_driver;
+struct udev *udev_context;
+
+static struct usbip_imported_device *
+imported_device_init(struct usbip_imported_device *idev, char *busid)
+{
+	struct udev_device *sudev;
+
+	sudev = udev_device_new_from_subsystem_sysname(udev_context,
+						       "usb", busid);
+	if (!sudev) {
+		dbg("udev_device_new_from_subsystem_sysname failed: %s", busid);
+		goto err;
+	}
+	read_usb_device(sudev, &idev->udev);
+	udev_device_unref(sudev);
+
+	return idev;
+
+err:
+	return NULL;
+}
+
+
+
+static int parse_status(const char *value)
+{
+	int ret = 0;
+	char *c;
+
+
+	for (int i = 0; i < vhci_driver->nports; i++)
+		memset(&vhci_driver->idev[i], 0, sizeof(vhci_driver->idev[i]));
+
+
+	/* skip a header line */
+	c = strchr(value, '\n');
+	if (!c)
+		return -1;
+	c++;
+
+	while (*c != '\0') {
+		int port, status, speed, devid;
+		unsigned long socket;
+		char lbusid[SYSFS_BUS_ID_SIZE];
+
+		ret = sscanf(c, "%d %d %d %x %lx %31s\n",
+				&port, &status, &speed,
+				&devid, &socket, lbusid);
+
+		if (ret < 5) {
+			dbg("sscanf failed: %d", ret);
+			BUG();
+		}
+
+		dbg("port %d status %d speed %d devid %x",
+				port, status, speed, devid);
+		dbg("socket %lx lbusid %s", socket, lbusid);
+
+
+		/* if a device is connected, look at it */
+		{
+			struct usbip_imported_device *idev = &vhci_driver->idev[port];
+
+			idev->port	= port;
+			idev->status	= status;
+
+			idev->devid	= devid;
+
+			idev->busnum	= (devid >> 16);
+			idev->devnum	= (devid & 0x0000ffff);
+
+			if (idev->status != VDEV_ST_NULL
+			    && idev->status != VDEV_ST_NOTASSIGNED) {
+				idev = imported_device_init(idev, lbusid);
+				if (!idev) {
+					dbg("imported_device_init failed");
+					return -1;
+				}
+			}
+		}
+
+
+		/* go to the next line */
+		c = strchr(c, '\n');
+		if (!c)
+			break;
+		c++;
+	}
+
+	dbg("exit");
+
+	return 0;
+}
+
+static int refresh_imported_device_list(void)
+{
+	const char *attr_status;
+
+	attr_status = udev_device_get_sysattr_value(vhci_driver->hc_device,
+					       "status");
+	if (!attr_status) {
+		err("udev_device_get_sysattr_value failed");
+		return -1;
+	}
+
+	return parse_status(attr_status);
+}
+
+static int get_nports(void)
+{
+	char *c;
+	int nports = 0;
+	const char *attr_status;
+
+	attr_status = udev_device_get_sysattr_value(vhci_driver->hc_device,
+					       "status");
+	if (!attr_status) {
+		err("udev_device_get_sysattr_value failed");
+		return -1;
+	}
+
+	/* skip a header line */
+	c = strchr(attr_status, '\n');
+	if (!c)
+		return 0;
+	c++;
+
+	while (*c != '\0') {
+		/* go to the next line */
+		c = strchr(c, '\n');
+		if (!c)
+			return nports;
+		c++;
+		nports += 1;
+	}
+
+	return nports;
+}
+
+/*
+ * Read the given port's record.
+ *
+ * To avoid buffer overflow we will read the entire line and
+ * validate each part's size. The initial buffer is padded by 4 to
+ * accommodate the 2 spaces, 1 newline and an additional character
+ * which is needed to properly validate the 3rd part without it being
+ * truncated to an acceptable length.
+ */
+static int read_record(int rhport, char *host, unsigned long host_len,
+		char *port, unsigned long port_len, char *busid)
+{
+	int part;
+	FILE *file;
+	char path[PATH_MAX+1];
+	char *buffer, *start, *end;
+	char delim[] = {' ', ' ', '\n'};
+	int max_len[] = {(int)host_len, (int)port_len, SYSFS_BUS_ID_SIZE};
+	size_t buffer_len = host_len + port_len + SYSFS_BUS_ID_SIZE + 4;
+
+	buffer = malloc(buffer_len);
+	if (!buffer)
+		return -1;
+
+	snprintf(path, PATH_MAX, VHCI_STATE_PATH"/port%d", rhport);
+
+	file = fopen(path, "r");
+	if (!file) {
+		err("fopen");
+		free(buffer);
+		return -1;
+	}
+
+	if (fgets(buffer, buffer_len, file) == NULL) {
+		err("fgets");
+		free(buffer);
+		fclose(file);
+		return -1;
+	}
+	fclose(file);
+
+	/* validate the length of each of the 3 parts */
+	start = buffer;
+	for (part = 0; part < 3; part++) {
+		end = strchr(start, delim[part]);
+		if (end == NULL || (end - start) > max_len[part]) {
+			free(buffer);
+			return -1;
+		}
+		start = end + 1;
+	}
+
+	if (sscanf(buffer, "%s %s %s\n", host, port, busid) != 3) {
+		err("sscanf");
+		free(buffer);
+		return -1;
+	}
+
+	free(buffer);
+
+	return 0;
+}
+
+/* ---------------------------------------------------------------------- */
+
+int usbip_vhci_driver_open(void)
+{
+	udev_context = udev_new();
+	if (!udev_context) {
+		err("udev_new failed");
+		return -1;
+	}
+
+	vhci_driver = calloc(1, sizeof(struct usbip_vhci_driver));
+
+	/* will be freed in usbip_driver_close() */
+	vhci_driver->hc_device =
+		udev_device_new_from_subsystem_sysname(udev_context,
+						       USBIP_VHCI_BUS_TYPE,
+						       USBIP_VHCI_DRV_NAME);
+	if (!vhci_driver->hc_device) {
+		err("udev_device_new_from_subsystem_sysname failed");
+		goto err;
+	}
+
+	vhci_driver->nports = get_nports();
+
+	dbg("available ports: %d", vhci_driver->nports);
+
+	if (refresh_imported_device_list())
+		goto err;
+
+	return 0;
+
+err:
+	udev_device_unref(vhci_driver->hc_device);
+
+	if (vhci_driver)
+		free(vhci_driver);
+
+	vhci_driver = NULL;
+
+	udev_unref(udev_context);
+
+	return -1;
+}
+
+
+void usbip_vhci_driver_close(void)
+{
+	if (!vhci_driver)
+		return;
+
+	udev_device_unref(vhci_driver->hc_device);
+
+	free(vhci_driver);
+
+	vhci_driver = NULL;
+
+	udev_unref(udev_context);
+}
+
+
+int usbip_vhci_refresh_device_list(void)
+{
+
+	if (refresh_imported_device_list())
+		goto err;
+
+	return 0;
+err:
+	dbg("failed to refresh device list");
+	return -1;
+}
+
+
+int usbip_vhci_get_free_port(void)
+{
+	for (int i = 0; i < vhci_driver->nports; i++) {
+		if (vhci_driver->idev[i].status == VDEV_ST_NULL)
+			return i;
+	}
+
+	return -1;
+}
+
+int usbip_vhci_attach_device2(uint8_t port, int sockfd, uint32_t devid,
+		uint32_t speed) {
+	char buff[200]; /* what size should be ? */
+	char attach_attr_path[SYSFS_PATH_MAX];
+	char attr_attach[] = "attach";
+	const char *path;
+	int ret;
+
+	snprintf(buff, sizeof(buff), "%u %d %u %u",
+			port, sockfd, devid, speed);
+	dbg("writing: %s", buff);
+
+	path = udev_device_get_syspath(vhci_driver->hc_device);
+	snprintf(attach_attr_path, sizeof(attach_attr_path), "%s/%s",
+		 path, attr_attach);
+	dbg("attach attribute path: %s", attach_attr_path);
+
+	ret = write_sysfs_attribute(attach_attr_path, buff, strlen(buff));
+	if (ret < 0) {
+		dbg("write_sysfs_attribute failed");
+		return -1;
+	}
+
+	dbg("attached port: %d", port);
+
+	return 0;
+}
+
+static unsigned long get_devid(uint8_t busnum, uint8_t devnum)
+{
+	return (busnum << 16) | devnum;
+}
+
+/* will be removed */
+int usbip_vhci_attach_device(uint8_t port, int sockfd, uint8_t busnum,
+		uint8_t devnum, uint32_t speed)
+{
+	int devid = get_devid(busnum, devnum);
+
+	return usbip_vhci_attach_device2(port, sockfd, devid, speed);
+}
+
+int usbip_vhci_detach_device(uint8_t port)
+{
+	char detach_attr_path[SYSFS_PATH_MAX];
+	char attr_detach[] = "detach";
+	char buff[200]; /* what size should be ? */
+	const char *path;
+	int ret;
+
+	snprintf(buff, sizeof(buff), "%u", port);
+	dbg("writing: %s", buff);
+
+	path = udev_device_get_syspath(vhci_driver->hc_device);
+	snprintf(detach_attr_path, sizeof(detach_attr_path), "%s/%s",
+		 path, attr_detach);
+	dbg("detach attribute path: %s", detach_attr_path);
+
+	ret = write_sysfs_attribute(detach_attr_path, buff, strlen(buff));
+	if (ret < 0) {
+		dbg("write_sysfs_attribute failed");
+		return -1;
+	}
+
+	dbg("detached port: %d", port);
+
+	return 0;
+}
+
+int usbip_vhci_imported_device_dump(struct usbip_imported_device *idev)
+{
+	char product_name[100];
+	char host[NI_MAXHOST] = "unknown host";
+	char serv[NI_MAXSERV] = "unknown port";
+	char remote_busid[SYSFS_BUS_ID_SIZE];
+	int ret;
+	int read_record_error = 0;
+
+	if (idev->status == VDEV_ST_NULL || idev->status == VDEV_ST_NOTASSIGNED)
+		return 0;
+
+	ret = read_record(idev->port, host, sizeof(host), serv, sizeof(serv),
+			  remote_busid);
+	if (ret) {
+		err("read_record");
+		read_record_error = 1;
+	}
+
+	printf("Port %02d: <%s> at %s\n", idev->port,
+	       usbip_status_string(idev->status),
+	       usbip_speed_string(idev->udev.speed));
+
+	usbip_names_get_product(product_name, sizeof(product_name),
+				idev->udev.idVendor, idev->udev.idProduct);
+
+	printf("       %s\n",  product_name);
+
+	if (!read_record_error) {
+		printf("%10s -> usbip://%s:%s/%s\n", idev->udev.busid,
+		       host, serv, remote_busid);
+		printf("%10s -> remote bus/dev %03d/%03d\n", " ",
+		       idev->busnum, idev->devnum);
+	} else {
+		printf("%10s -> unknown host, remote port and remote busid\n",
+		       idev->udev.busid);
+		printf("%10s -> remote bus/dev %03d/%03d\n", " ",
+		       idev->busnum, idev->devnum);
+	}
+
+	return 0;
+}
diff --git a/tools/usb/usbip/libsrc/vhci_driver.h b/tools/usb/usbip/libsrc/vhci_driver.h
new file mode 100644
index 000000000000..fa2316cf2cac
--- /dev/null
+++ b/tools/usb/usbip/libsrc/vhci_driver.h
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2005-2007 Takahiro Hirofuchi
+ */
+
+#ifndef __VHCI_DRIVER_H
+#define __VHCI_DRIVER_H
+
+#include <libudev.h>
+#include <stdint.h>
+
+#include "usbip_common.h"
+
+#define USBIP_VHCI_BUS_TYPE "platform"
+#define MAXNPORT 128
+
+struct usbip_imported_device {
+	uint8_t port;
+	uint32_t status;
+
+	uint32_t devid;
+
+	uint8_t busnum;
+	uint8_t devnum;
+
+	/* usbip_class_device list */
+	struct usbip_usb_device udev;
+};
+
+struct usbip_vhci_driver {
+
+	/* /sys/devices/platform/vhci_hcd */
+	struct udev_device *hc_device;
+
+	int nports;
+	struct usbip_imported_device idev[MAXNPORT];
+};
+
+
+extern struct usbip_vhci_driver *vhci_driver;
+
+int usbip_vhci_driver_open(void);
+void usbip_vhci_driver_close(void);
+
+int  usbip_vhci_refresh_device_list(void);
+
+
+int usbip_vhci_get_free_port(void);
+int usbip_vhci_attach_device2(uint8_t port, int sockfd, uint32_t devid,
+		uint32_t speed);
+
+/* will be removed */
+int usbip_vhci_attach_device(uint8_t port, int sockfd, uint8_t busnum,
+		uint8_t devnum, uint32_t speed);
+
+int usbip_vhci_detach_device(uint8_t port);
+
+int usbip_vhci_imported_device_dump(struct usbip_imported_device *idev);
+
+#endif /* __VHCI_DRIVER_H */
diff --git a/tools/usb/usbip/src/Makefile.am b/tools/usb/usbip/src/Makefile.am
new file mode 100644
index 000000000000..e81a4ebadeff
--- /dev/null
+++ b/tools/usb/usbip/src/Makefile.am
@@ -0,0 +1,11 @@
+AM_CPPFLAGS = -I$(top_srcdir)/libsrc -DUSBIDS_FILE='"@USBIDS_DIR@/usb.ids"'
+AM_CFLAGS   = @EXTRA_CFLAGS@
+LDADD       = $(top_builddir)/libsrc/libusbip.la
+
+sbin_PROGRAMS := usbip usbipd
+
+usbip_SOURCES := usbip.h utils.h usbip.c utils.c usbip_network.c \
+		 usbip_attach.c usbip_detach.c usbip_list.c \
+		 usbip_bind.c usbip_unbind.c usbip_port.c
+
+usbipd_SOURCES := usbip_network.h usbipd.c usbip_network.c
diff --git a/tools/usb/usbip/src/usbip.c b/tools/usb/usbip/src/usbip.c
new file mode 100644
index 000000000000..d7599d943529
--- /dev/null
+++ b/tools/usb/usbip/src/usbip.c
@@ -0,0 +1,201 @@
+/*
+ * command structure borrowed from udev
+ * (git://git.kernel.org/pub/scm/linux/hotplug/udev.git)
+ *
+ * Copyright (C) 2011 matt mooney <mfm@muteddisk.com>
+ *               2005-2007 Takahiro Hirofuchi
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+
+#include <getopt.h>
+#include <syslog.h>
+
+#include "usbip_common.h"
+#include "usbip_network.h"
+#include "usbip.h"
+
+static int usbip_help(int argc, char *argv[]);
+static int usbip_version(int argc, char *argv[]);
+
+static const char usbip_version_string[] = PACKAGE_STRING;
+
+static const char usbip_usage_string[] =
+	"usbip [--debug] [--log] [--tcp-port PORT] [version]\n"
+	"             [help] <command> <args>\n";
+
+static void usbip_usage(void)
+{
+	printf("usage: %s", usbip_usage_string);
+}
+
+struct command {
+	const char *name;
+	int (*fn)(int argc, char *argv[]);
+	const char *help;
+	void (*usage)(void);
+};
+
+static const struct command cmds[] = {
+	{
+		.name  = "help",
+		.fn    = usbip_help,
+		.help  = NULL,
+		.usage = NULL
+	},
+	{
+		.name  = "version",
+		.fn    = usbip_version,
+		.help  = NULL,
+		.usage = NULL
+	},
+	{
+		.name  = "attach",
+		.fn    = usbip_attach,
+		.help  = "Attach a remote USB device",
+		.usage = usbip_attach_usage
+	},
+	{
+		.name  = "detach",
+		.fn    = usbip_detach,
+		.help  = "Detach a remote USB device",
+		.usage = usbip_detach_usage
+	},
+	{
+		.name  = "list",
+		.fn    = usbip_list,
+		.help  = "List exportable or local USB devices",
+		.usage = usbip_list_usage
+	},
+	{
+		.name  = "bind",
+		.fn    = usbip_bind,
+		.help  = "Bind device to " USBIP_HOST_DRV_NAME ".ko",
+		.usage = usbip_bind_usage
+	},
+	{
+		.name  = "unbind",
+		.fn    = usbip_unbind,
+		.help  = "Unbind device from " USBIP_HOST_DRV_NAME ".ko",
+		.usage = usbip_unbind_usage
+	},
+	{
+		.name  = "port",
+		.fn    = usbip_port_show,
+		.help  = "Show imported USB devices",
+		.usage = NULL
+	},
+	{ NULL, NULL, NULL, NULL }
+};
+
+static int usbip_help(int argc, char *argv[])
+{
+	const struct command *cmd;
+	int i;
+	int ret = 0;
+
+	if (argc > 1 && argv++) {
+		for (i = 0; cmds[i].name != NULL; i++)
+			if (!strcmp(cmds[i].name, argv[0]) && cmds[i].usage) {
+				cmds[i].usage();
+				goto done;
+			}
+		ret = -1;
+	}
+
+	usbip_usage();
+	printf("\n");
+	for (cmd = cmds; cmd->name != NULL; cmd++)
+		if (cmd->help != NULL)
+			printf("  %-10s %s\n", cmd->name, cmd->help);
+	printf("\n");
+done:
+	return ret;
+}
+
+static int usbip_version(int argc, char *argv[])
+{
+	(void) argc;
+	(void) argv;
+
+	printf(PROGNAME " (%s)\n", usbip_version_string);
+	return 0;
+}
+
+static int run_command(const struct command *cmd, int argc, char *argv[])
+{
+	dbg("running command: `%s'", cmd->name);
+	return cmd->fn(argc, argv);
+}
+
+int main(int argc, char *argv[])
+{
+	static const struct option opts[] = {
+		{ "debug",    no_argument,       NULL, 'd' },
+		{ "log",      no_argument,       NULL, 'l' },
+		{ "tcp-port", required_argument, NULL, 't' },
+		{ NULL,       0,                 NULL,  0  }
+	};
+
+	char *cmd;
+	int opt;
+	int i, rc = -1;
+
+	usbip_use_stderr = 1;
+	opterr = 0;
+	for (;;) {
+		opt = getopt_long(argc, argv, "+dlt:", opts, NULL);
+
+		if (opt == -1)
+			break;
+
+		switch (opt) {
+		case 'd':
+			usbip_use_debug = 1;
+			break;
+		case 'l':
+			usbip_use_syslog = 1;
+			openlog("", LOG_PID, LOG_USER);
+			break;
+		case 't':
+			usbip_setup_port_number(optarg);
+			break;
+		case '?':
+			printf("usbip: invalid option\n");
+		default:
+			usbip_usage();
+			goto out;
+		}
+	}
+
+	cmd = argv[optind];
+	if (cmd) {
+		for (i = 0; cmds[i].name != NULL; i++)
+			if (!strcmp(cmds[i].name, cmd)) {
+				argc -= optind;
+				argv += optind;
+				optind = 0;
+				rc = run_command(&cmds[i], argc, argv);
+				goto out;
+			}
+	}
+
+	/* invalid command */
+	usbip_help(0, NULL);
+out:
+	return (rc > -1 ? EXIT_SUCCESS : EXIT_FAILURE);
+}
diff --git a/tools/usb/usbip/src/usbip.h b/tools/usb/usbip/src/usbip.h
new file mode 100644
index 000000000000..84fe66a9d8ad
--- /dev/null
+++ b/tools/usb/usbip/src/usbip.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2011 matt mooney <mfm@muteddisk.com>
+ *               2005-2007 Takahiro Hirofuchi
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __USBIP_H
+#define __USBIP_H
+
+#ifdef HAVE_CONFIG_H
+#include "../config.h"
+#endif
+
+/* usbip commands */
+int usbip_attach(int argc, char *argv[]);
+int usbip_detach(int argc, char *argv[]);
+int usbip_list(int argc, char *argv[]);
+int usbip_bind(int argc, char *argv[]);
+int usbip_unbind(int argc, char *argv[]);
+int usbip_port_show(int argc, char *argv[]);
+
+void usbip_attach_usage(void);
+void usbip_detach_usage(void);
+void usbip_list_usage(void);
+void usbip_bind_usage(void);
+void usbip_unbind_usage(void);
+
+#endif /* __USBIP_H */
diff --git a/tools/usb/usbip/src/usbip_attach.c b/tools/usb/usbip/src/usbip_attach.c
new file mode 100644
index 000000000000..d58a14dfc094
--- /dev/null
+++ b/tools/usb/usbip/src/usbip_attach.c
@@ -0,0 +1,241 @@
+/*
+ * Copyright (C) 2011 matt mooney <mfm@muteddisk.com>
+ *               2005-2007 Takahiro Hirofuchi
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <sys/stat.h>
+
+#include <limits.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <string.h>
+
+#include <fcntl.h>
+#include <getopt.h>
+#include <unistd.h>
+#include <errno.h>
+
+#include "vhci_driver.h"
+#include "usbip_common.h"
+#include "usbip_network.h"
+#include "usbip.h"
+
+static const char usbip_attach_usage_string[] =
+	"usbip attach <args>\n"
+	"    -r, --remote=<host>      The machine with exported USB devices\n"
+	"    -b, --busid=<busid>    Busid of the device on <host>\n";
+
+void usbip_attach_usage(void)
+{
+	printf("usage: %s", usbip_attach_usage_string);
+}
+
+#define MAX_BUFF 100
+static int record_connection(char *host, char *port, char *busid, int rhport)
+{
+	int fd;
+	char path[PATH_MAX+1];
+	char buff[MAX_BUFF+1];
+	int ret;
+
+	ret = mkdir(VHCI_STATE_PATH, 0700);
+	if (ret < 0) {
+		/* if VHCI_STATE_PATH exists, then it better be a directory */
+		if (errno == EEXIST) {
+			struct stat s;
+
+			ret = stat(VHCI_STATE_PATH, &s);
+			if (ret < 0)
+				return -1;
+			if (!(s.st_mode & S_IFDIR))
+				return -1;
+		} else
+			return -1;
+	}
+
+	snprintf(path, PATH_MAX, VHCI_STATE_PATH"/port%d", rhport);
+
+	fd = open(path, O_WRONLY|O_CREAT|O_TRUNC, S_IRWXU);
+	if (fd < 0)
+		return -1;
+
+	snprintf(buff, MAX_BUFF, "%s %s %s\n",
+			host, port, busid);
+
+	ret = write(fd, buff, strlen(buff));
+	if (ret != (ssize_t) strlen(buff)) {
+		close(fd);
+		return -1;
+	}
+
+	close(fd);
+
+	return 0;
+}
+
+static int import_device(int sockfd, struct usbip_usb_device *udev)
+{
+	int rc;
+	int port;
+
+	rc = usbip_vhci_driver_open();
+	if (rc < 0) {
+		err("open vhci_driver");
+		return -1;
+	}
+
+	port = usbip_vhci_get_free_port();
+	if (port < 0) {
+		err("no free port");
+		usbip_vhci_driver_close();
+		return -1;
+	}
+
+	rc = usbip_vhci_attach_device(port, sockfd, udev->busnum,
+				      udev->devnum, udev->speed);
+	if (rc < 0) {
+		err("import device");
+		usbip_vhci_driver_close();
+		return -1;
+	}
+
+	usbip_vhci_driver_close();
+
+	return port;
+}
+
+static int query_import_device(int sockfd, char *busid)
+{
+	int rc;
+	struct op_import_request request;
+	struct op_import_reply   reply;
+	uint16_t code = OP_REP_IMPORT;
+
+	memset(&request, 0, sizeof(request));
+	memset(&reply, 0, sizeof(reply));
+
+	/* send a request */
+	rc = usbip_net_send_op_common(sockfd, OP_REQ_IMPORT, 0);
+	if (rc < 0) {
+		err("send op_common");
+		return -1;
+	}
+
+	strncpy(request.busid, busid, SYSFS_BUS_ID_SIZE-1);
+
+	PACK_OP_IMPORT_REQUEST(0, &request);
+
+	rc = usbip_net_send(sockfd, (void *) &request, sizeof(request));
+	if (rc < 0) {
+		err("send op_import_request");
+		return -1;
+	}
+
+	/* receive a reply */
+	rc = usbip_net_recv_op_common(sockfd, &code);
+	if (rc < 0) {
+		err("recv op_common");
+		return -1;
+	}
+
+	rc = usbip_net_recv(sockfd, (void *) &reply, sizeof(reply));
+	if (rc < 0) {
+		err("recv op_import_reply");
+		return -1;
+	}
+
+	PACK_OP_IMPORT_REPLY(0, &reply);
+
+	/* check the reply */
+	if (strncmp(reply.udev.busid, busid, SYSFS_BUS_ID_SIZE)) {
+		err("recv different busid %s", reply.udev.busid);
+		return -1;
+	}
+
+	/* import a device */
+	return import_device(sockfd, &reply.udev);
+}
+
+static int attach_device(char *host, char *busid)
+{
+	int sockfd;
+	int rc;
+	int rhport;
+
+	sockfd = usbip_net_tcp_connect(host, usbip_port_string);
+	if (sockfd < 0) {
+		err("tcp connect");
+		return -1;
+	}
+
+	rhport = query_import_device(sockfd, busid);
+	if (rhport < 0) {
+		err("query");
+		return -1;
+	}
+
+	close(sockfd);
+
+	rc = record_connection(host, usbip_port_string, busid, rhport);
+	if (rc < 0) {
+		err("record connection");
+		return -1;
+	}
+
+	return 0;
+}
+
+int usbip_attach(int argc, char *argv[])
+{
+	static const struct option opts[] = {
+		{ "remote", required_argument, NULL, 'r' },
+		{ "busid",  required_argument, NULL, 'b' },
+		{ NULL, 0,  NULL, 0 }
+	};
+	char *host = NULL;
+	char *busid = NULL;
+	int opt;
+	int ret = -1;
+
+	for (;;) {
+		opt = getopt_long(argc, argv, "r:b:", opts, NULL);
+
+		if (opt == -1)
+			break;
+
+		switch (opt) {
+		case 'r':
+			host = optarg;
+			break;
+		case 'b':
+			busid = optarg;
+			break;
+		default:
+			goto err_out;
+		}
+	}
+
+	if (!host || !busid)
+		goto err_out;
+
+	ret = attach_device(host, busid);
+	goto out;
+
+err_out:
+	usbip_attach_usage();
+out:
+	return ret;
+}
diff --git a/tools/usb/usbip/src/usbip_bind.c b/tools/usb/usbip/src/usbip_bind.c
new file mode 100644
index 000000000000..fa46141ae68b
--- /dev/null
+++ b/tools/usb/usbip/src/usbip_bind.c
@@ -0,0 +1,214 @@
+/*
+ * Copyright (C) 2011 matt mooney <mfm@muteddisk.com>
+ *               2005-2007 Takahiro Hirofuchi
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <libudev.h>
+
+#include <errno.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <getopt.h>
+
+#include "usbip_common.h"
+#include "utils.h"
+#include "usbip.h"
+#include "sysfs_utils.h"
+
+enum unbind_status {
+	UNBIND_ST_OK,
+	UNBIND_ST_USBIP_HOST,
+	UNBIND_ST_FAILED
+};
+
+static const char usbip_bind_usage_string[] =
+	"usbip bind <args>\n"
+	"    -b, --busid=<busid>    Bind " USBIP_HOST_DRV_NAME ".ko to device "
+	"on <busid>\n";
+
+void usbip_bind_usage(void)
+{
+	printf("usage: %s", usbip_bind_usage_string);
+}
+
+/* call at unbound state */
+static int bind_usbip(char *busid)
+{
+	char attr_name[] = "bind";
+	char bind_attr_path[SYSFS_PATH_MAX];
+	int rc = -1;
+
+	snprintf(bind_attr_path, sizeof(bind_attr_path), "%s/%s/%s/%s/%s/%s",
+		 SYSFS_MNT_PATH, SYSFS_BUS_NAME, SYSFS_BUS_TYPE,
+		 SYSFS_DRIVERS_NAME, USBIP_HOST_DRV_NAME, attr_name);
+
+	rc = write_sysfs_attribute(bind_attr_path, busid, strlen(busid));
+	if (rc < 0) {
+		err("error binding device %s to driver: %s", busid,
+		    strerror(errno));
+		return -1;
+	}
+
+	return 0;
+}
+
+/* buggy driver may cause dead lock */
+static int unbind_other(char *busid)
+{
+	enum unbind_status status = UNBIND_ST_OK;
+
+	char attr_name[] = "unbind";
+	char unbind_attr_path[SYSFS_PATH_MAX];
+	int rc = -1;
+
+	struct udev *udev;
+	struct udev_device *dev;
+	const char *driver;
+	const char *bDevClass;
+
+	/* Create libudev context. */
+	udev = udev_new();
+
+	/* Get the device. */
+	dev = udev_device_new_from_subsystem_sysname(udev, "usb", busid);
+	if (!dev) {
+		dbg("unable to find device with bus ID %s", busid);
+		goto err_close_busid_dev;
+	}
+
+	/* Check what kind of device it is. */
+	bDevClass  = udev_device_get_sysattr_value(dev, "bDeviceClass");
+	if (!bDevClass) {
+		dbg("unable to get bDevClass device attribute");
+		goto err_close_busid_dev;
+	}
+
+	if (!strncmp(bDevClass, "09", strlen(bDevClass))) {
+		dbg("skip unbinding of hub");
+		goto err_close_busid_dev;
+	}
+
+	/* Get the device driver. */
+	driver = udev_device_get_driver(dev);
+	if (!driver) {
+		/* No driver bound to this device. */
+		goto out;
+	}
+
+	if (!strncmp(USBIP_HOST_DRV_NAME, driver,
+				strlen(USBIP_HOST_DRV_NAME))) {
+		/* Already bound to usbip-host. */
+		status = UNBIND_ST_USBIP_HOST;
+		goto out;
+	}
+
+	/* Unbind device from driver. */
+	snprintf(unbind_attr_path, sizeof(unbind_attr_path), "%s/%s/%s/%s/%s/%s",
+		 SYSFS_MNT_PATH, SYSFS_BUS_NAME, SYSFS_BUS_TYPE,
+		 SYSFS_DRIVERS_NAME, driver, attr_name);
+
+	rc = write_sysfs_attribute(unbind_attr_path, busid, strlen(busid));
+	if (rc < 0) {
+		err("error unbinding device %s from driver", busid);
+		goto err_close_busid_dev;
+	}
+
+	goto out;
+
+err_close_busid_dev:
+	status = UNBIND_ST_FAILED;
+out:
+	udev_device_unref(dev);
+	udev_unref(udev);
+
+	return status;
+}
+
+static int bind_device(char *busid)
+{
+	int rc;
+	struct udev *udev;
+	struct udev_device *dev;
+
+	/* Check whether the device with this bus ID exists. */
+	udev = udev_new();
+	dev = udev_device_new_from_subsystem_sysname(udev, "usb", busid);
+	if (!dev) {
+		err("device with the specified bus ID does not exist");
+		return -1;
+	}
+	udev_unref(udev);
+
+	rc = unbind_other(busid);
+	if (rc == UNBIND_ST_FAILED) {
+		err("could not unbind driver from device on busid %s", busid);
+		return -1;
+	} else if (rc == UNBIND_ST_USBIP_HOST) {
+		err("device on busid %s is already bound to %s", busid,
+		    USBIP_HOST_DRV_NAME);
+		return -1;
+	}
+
+	rc = modify_match_busid(busid, 1);
+	if (rc < 0) {
+		err("unable to bind device on %s", busid);
+		return -1;
+	}
+
+	rc = bind_usbip(busid);
+	if (rc < 0) {
+		err("could not bind device to %s", USBIP_HOST_DRV_NAME);
+		modify_match_busid(busid, 0);
+		return -1;
+	}
+
+	info("bind device on busid %s: complete", busid);
+
+	return 0;
+}
+
+int usbip_bind(int argc, char *argv[])
+{
+	static const struct option opts[] = {
+		{ "busid", required_argument, NULL, 'b' },
+		{ NULL,    0,                 NULL,  0  }
+	};
+
+	int opt;
+	int ret = -1;
+
+	for (;;) {
+		opt = getopt_long(argc, argv, "b:", opts, NULL);
+
+		if (opt == -1)
+			break;
+
+		switch (opt) {
+		case 'b':
+			ret = bind_device(optarg);
+			goto out;
+		default:
+			goto err_out;
+		}
+	}
+
+err_out:
+	usbip_bind_usage();
+out:
+	return ret;
+}
diff --git a/tools/usb/usbip/src/usbip_detach.c b/tools/usb/usbip/src/usbip_detach.c
new file mode 100644
index 000000000000..05c6d15856eb
--- /dev/null
+++ b/tools/usb/usbip/src/usbip_detach.c
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2011 matt mooney <mfm@muteddisk.com>
+ *               2005-2007 Takahiro Hirofuchi
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <ctype.h>
+#include <limits.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <getopt.h>
+#include <unistd.h>
+
+#include "vhci_driver.h"
+#include "usbip_common.h"
+#include "usbip_network.h"
+#include "usbip.h"
+
+static const char usbip_detach_usage_string[] =
+	"usbip detach <args>\n"
+	"    -p, --port=<port>    " USBIP_VHCI_DRV_NAME
+	" port the device is on\n";
+
+void usbip_detach_usage(void)
+{
+	printf("usage: %s", usbip_detach_usage_string);
+}
+
+static int detach_port(char *port)
+{
+	int ret;
+	uint8_t portnum;
+	char path[PATH_MAX+1];
+
+	for (unsigned int i = 0; i < strlen(port); i++)
+		if (!isdigit(port[i])) {
+			err("invalid port %s", port);
+			return -1;
+		}
+
+	/* check max port */
+
+	portnum = atoi(port);
+
+	/* remove the port state file */
+
+	snprintf(path, PATH_MAX, VHCI_STATE_PATH"/port%d", portnum);
+
+	remove(path);
+	rmdir(VHCI_STATE_PATH);
+
+	ret = usbip_vhci_driver_open();
+	if (ret < 0) {
+		err("open vhci_driver");
+		return -1;
+	}
+
+	ret = usbip_vhci_detach_device(portnum);
+	if (ret < 0)
+		return -1;
+
+	usbip_vhci_driver_close();
+
+	return ret;
+}
+
+int usbip_detach(int argc, char *argv[])
+{
+	static const struct option opts[] = {
+		{ "port", required_argument, NULL, 'p' },
+		{ NULL, 0, NULL, 0 }
+	};
+	int opt;
+	int ret = -1;
+
+	for (;;) {
+		opt = getopt_long(argc, argv, "p:", opts, NULL);
+
+		if (opt == -1)
+			break;
+
+		switch (opt) {
+		case 'p':
+			ret = detach_port(optarg);
+			goto out;
+		default:
+			goto err_out;
+		}
+	}
+
+err_out:
+	usbip_detach_usage();
+out:
+	return ret;
+}
diff --git a/tools/usb/usbip/src/usbip_list.c b/tools/usb/usbip/src/usbip_list.c
new file mode 100644
index 000000000000..d5ce34a410e7
--- /dev/null
+++ b/tools/usb/usbip/src/usbip_list.c
@@ -0,0 +1,283 @@
+/*
+ * Copyright (C) 2011 matt mooney <mfm@muteddisk.com>
+ *               2005-2007 Takahiro Hirofuchi
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <sys/types.h>
+#include <libudev.h>
+
+#include <errno.h>
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <getopt.h>
+#include <netdb.h>
+#include <unistd.h>
+
+#include "usbip_common.h"
+#include "usbip_network.h"
+#include "usbip.h"
+
+static const char usbip_list_usage_string[] =
+	"usbip list [-p|--parsable] <args>\n"
+	"    -p, --parsable         Parsable list format\n"
+	"    -r, --remote=<host>    List the exportable USB devices on <host>\n"
+	"    -l, --local            List the local USB devices\n";
+
+void usbip_list_usage(void)
+{
+	printf("usage: %s", usbip_list_usage_string);
+}
+
+static int get_exported_devices(char *host, int sockfd)
+{
+	char product_name[100];
+	char class_name[100];
+	struct op_devlist_reply reply;
+	uint16_t code = OP_REP_DEVLIST;
+	struct usbip_usb_device udev;
+	struct usbip_usb_interface uintf;
+	unsigned int i;
+	int rc, j;
+
+	rc = usbip_net_send_op_common(sockfd, OP_REQ_DEVLIST, 0);
+	if (rc < 0) {
+		dbg("usbip_net_send_op_common failed");
+		return -1;
+	}
+
+	rc = usbip_net_recv_op_common(sockfd, &code);
+	if (rc < 0) {
+		dbg("usbip_net_recv_op_common failed");
+		return -1;
+	}
+
+	memset(&reply, 0, sizeof(reply));
+	rc = usbip_net_recv(sockfd, &reply, sizeof(reply));
+	if (rc < 0) {
+		dbg("usbip_net_recv_op_devlist failed");
+		return -1;
+	}
+	PACK_OP_DEVLIST_REPLY(0, &reply);
+	dbg("exportable devices: %d\n", reply.ndev);
+
+	if (reply.ndev == 0) {
+		info("no exportable devices found on %s", host);
+		return 0;
+	}
+
+	printf("Exportable USB devices\n");
+	printf("======================\n");
+	printf(" - %s\n", host);
+
+	for (i = 0; i < reply.ndev; i++) {
+		memset(&udev, 0, sizeof(udev));
+		rc = usbip_net_recv(sockfd, &udev, sizeof(udev));
+		if (rc < 0) {
+			dbg("usbip_net_recv failed: usbip_usb_device[%d]", i);
+			return -1;
+		}
+		usbip_net_pack_usb_device(0, &udev);
+
+		usbip_names_get_product(product_name, sizeof(product_name),
+					udev.idVendor, udev.idProduct);
+		usbip_names_get_class(class_name, sizeof(class_name),
+				      udev.bDeviceClass, udev.bDeviceSubClass,
+				      udev.bDeviceProtocol);
+		printf("%11s: %s\n", udev.busid, product_name);
+		printf("%11s: %s\n", "", udev.path);
+		printf("%11s: %s\n", "", class_name);
+
+		for (j = 0; j < udev.bNumInterfaces; j++) {
+			rc = usbip_net_recv(sockfd, &uintf, sizeof(uintf));
+			if (rc < 0) {
+				err("usbip_net_recv failed: usbip_usb_intf[%d]",
+						j);
+
+				return -1;
+			}
+			usbip_net_pack_usb_interface(0, &uintf);
+
+			usbip_names_get_class(class_name, sizeof(class_name),
+					uintf.bInterfaceClass,
+					uintf.bInterfaceSubClass,
+					uintf.bInterfaceProtocol);
+			printf("%11s: %2d - %s\n", "", j, class_name);
+		}
+
+		printf("\n");
+	}
+
+	return 0;
+}
+
+static int list_exported_devices(char *host)
+{
+	int rc;
+	int sockfd;
+
+	sockfd = usbip_net_tcp_connect(host, usbip_port_string);
+	if (sockfd < 0) {
+		err("could not connect to %s:%s: %s", host,
+		    usbip_port_string, gai_strerror(sockfd));
+		return -1;
+	}
+	dbg("connected to %s:%s", host, usbip_port_string);
+
+	rc = get_exported_devices(host, sockfd);
+	if (rc < 0) {
+		err("failed to get device list from %s", host);
+		return -1;
+	}
+
+	close(sockfd);
+
+	return 0;
+}
+
+static void print_device(const char *busid, const char *vendor,
+			 const char *product, bool parsable)
+{
+	if (parsable)
+		printf("busid=%s#usbid=%.4s:%.4s#", busid, vendor, product);
+	else
+		printf(" - busid %s (%.4s:%.4s)\n", busid, vendor, product);
+}
+
+static void print_product_name(char *product_name, bool parsable)
+{
+	if (!parsable)
+		printf("   %s\n", product_name);
+}
+
+static int list_devices(bool parsable)
+{
+	struct udev *udev;
+	struct udev_enumerate *enumerate;
+	struct udev_list_entry *devices, *dev_list_entry;
+	struct udev_device *dev;
+	const char *path;
+	const char *idVendor;
+	const char *idProduct;
+	const char *bConfValue;
+	const char *bNumIntfs;
+	const char *busid;
+	char product_name[128];
+	int ret = -1;
+
+	/* Create libudev context. */
+	udev = udev_new();
+
+	/* Create libudev device enumeration. */
+	enumerate = udev_enumerate_new(udev);
+
+	/* Take only USB devices that are not hubs and do not have
+	 * the bInterfaceNumber attribute, i.e. are not interfaces.
+	 */
+	udev_enumerate_add_match_subsystem(enumerate, "usb");
+	udev_enumerate_add_nomatch_sysattr(enumerate, "bDeviceClass", "09");
+	udev_enumerate_add_nomatch_sysattr(enumerate, "bInterfaceNumber", NULL);
+	udev_enumerate_scan_devices(enumerate);
+
+	devices = udev_enumerate_get_list_entry(enumerate);
+
+	/* Show information about each device. */
+	udev_list_entry_foreach(dev_list_entry, devices) {
+		path = udev_list_entry_get_name(dev_list_entry);
+		dev = udev_device_new_from_syspath(udev, path);
+
+		/* Get device information. */
+		idVendor = udev_device_get_sysattr_value(dev, "idVendor");
+		idProduct = udev_device_get_sysattr_value(dev, "idProduct");
+		bConfValue = udev_device_get_sysattr_value(dev, "bConfigurationValue");
+		bNumIntfs = udev_device_get_sysattr_value(dev, "bNumInterfaces");
+		busid = udev_device_get_sysname(dev);
+		if (!idVendor || !idProduct || !bConfValue || !bNumIntfs) {
+			err("problem getting device attributes: %s",
+			    strerror(errno));
+			goto err_out;
+		}
+
+		/* Get product name. */
+		usbip_names_get_product(product_name, sizeof(product_name),
+					strtol(idVendor, NULL, 16),
+					strtol(idProduct, NULL, 16));
+
+		/* Print information. */
+		print_device(busid, idVendor, idProduct, parsable);
+		print_product_name(product_name, parsable);
+
+		printf("\n");
+
+		udev_device_unref(dev);
+	}
+
+	ret = 0;
+
+err_out:
+	udev_enumerate_unref(enumerate);
+	udev_unref(udev);
+
+	return ret;
+}
+
+int usbip_list(int argc, char *argv[])
+{
+	static const struct option opts[] = {
+		{ "parsable", no_argument,       NULL, 'p' },
+		{ "remote",   required_argument, NULL, 'r' },
+		{ "local",    no_argument,       NULL, 'l' },
+		{ NULL,       0,                 NULL,  0  }
+	};
+
+	bool parsable = false;
+	int opt;
+	int ret = -1;
+
+	if (usbip_names_init(USBIDS_FILE))
+		err("failed to open %s", USBIDS_FILE);
+
+	for (;;) {
+		opt = getopt_long(argc, argv, "pr:l", opts, NULL);
+
+		if (opt == -1)
+			break;
+
+		switch (opt) {
+		case 'p':
+			parsable = true;
+			break;
+		case 'r':
+			ret = list_exported_devices(optarg);
+			goto out;
+		case 'l':
+			ret = list_devices(parsable);
+			goto out;
+		default:
+			goto err_out;
+		}
+	}
+
+err_out:
+	usbip_list_usage();
+out:
+	usbip_names_free();
+
+	return ret;
+}
diff --git a/tools/usb/usbip/src/usbip_network.c b/tools/usb/usbip/src/usbip_network.c
new file mode 100644
index 000000000000..b4c37e76a6e0
--- /dev/null
+++ b/tools/usb/usbip/src/usbip_network.c
@@ -0,0 +1,303 @@
+/*
+ * Copyright (C) 2011 matt mooney <mfm@muteddisk.com>
+ *               2005-2007 Takahiro Hirofuchi
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <sys/socket.h>
+
+#include <string.h>
+
+#include <arpa/inet.h>
+#include <netdb.h>
+#include <netinet/tcp.h>
+#include <unistd.h>
+
+#ifdef HAVE_LIBWRAP
+#include <tcpd.h>
+#endif
+
+#include "usbip_common.h"
+#include "usbip_network.h"
+
+int usbip_port = 3240;
+char *usbip_port_string = "3240";
+
+void usbip_setup_port_number(char *arg)
+{
+	dbg("parsing port arg '%s'", arg);
+	char *end;
+	unsigned long int port = strtoul(arg, &end, 10);
+
+	if (end == arg) {
+		err("port: could not parse '%s' as a decimal integer", arg);
+		return;
+	}
+
+	if (*end != '\0') {
+		err("port: garbage at end of '%s'", arg);
+		return;
+	}
+
+	if (port > UINT16_MAX) {
+		err("port: %s too high (max=%d)",
+		    arg, UINT16_MAX);
+		return;
+	}
+
+	usbip_port = port;
+	usbip_port_string = arg;
+	info("using port %d (\"%s\")", usbip_port, usbip_port_string);
+}
+
+void usbip_net_pack_uint32_t(int pack, uint32_t *num)
+{
+	uint32_t i;
+
+	if (pack)
+		i = htonl(*num);
+	else
+		i = ntohl(*num);
+
+	*num = i;
+}
+
+void usbip_net_pack_uint16_t(int pack, uint16_t *num)
+{
+	uint16_t i;
+
+	if (pack)
+		i = htons(*num);
+	else
+		i = ntohs(*num);
+
+	*num = i;
+}
+
+void usbip_net_pack_usb_device(int pack, struct usbip_usb_device *udev)
+{
+	usbip_net_pack_uint32_t(pack, &udev->busnum);
+	usbip_net_pack_uint32_t(pack, &udev->devnum);
+	usbip_net_pack_uint32_t(pack, &udev->speed);
+
+	usbip_net_pack_uint16_t(pack, &udev->idVendor);
+	usbip_net_pack_uint16_t(pack, &udev->idProduct);
+	usbip_net_pack_uint16_t(pack, &udev->bcdDevice);
+}
+
+void usbip_net_pack_usb_interface(int pack __attribute__((unused)),
+				  struct usbip_usb_interface *udev
+				  __attribute__((unused)))
+{
+	/* uint8_t members need nothing */
+}
+
+static ssize_t usbip_net_xmit(int sockfd, void *buff, size_t bufflen,
+			      int sending)
+{
+	ssize_t nbytes;
+	ssize_t total = 0;
+
+	if (!bufflen)
+		return 0;
+
+	do {
+		if (sending)
+			nbytes = send(sockfd, buff, bufflen, 0);
+		else
+			nbytes = recv(sockfd, buff, bufflen, MSG_WAITALL);
+
+		if (nbytes <= 0)
+			return -1;
+
+		buff	 = (void *)((intptr_t) buff + nbytes);
+		bufflen	-= nbytes;
+		total	+= nbytes;
+
+	} while (bufflen > 0);
+
+	return total;
+}
+
+ssize_t usbip_net_recv(int sockfd, void *buff, size_t bufflen)
+{
+	return usbip_net_xmit(sockfd, buff, bufflen, 0);
+}
+
+ssize_t usbip_net_send(int sockfd, void *buff, size_t bufflen)
+{
+	return usbip_net_xmit(sockfd, buff, bufflen, 1);
+}
+
+int usbip_net_send_op_common(int sockfd, uint32_t code, uint32_t status)
+{
+	struct op_common op_common;
+	int rc;
+
+	memset(&op_common, 0, sizeof(op_common));
+
+	op_common.version = USBIP_VERSION;
+	op_common.code    = code;
+	op_common.status  = status;
+
+	PACK_OP_COMMON(1, &op_common);
+
+	rc = usbip_net_send(sockfd, &op_common, sizeof(op_common));
+	if (rc < 0) {
+		dbg("usbip_net_send failed: %d", rc);
+		return -1;
+	}
+
+	return 0;
+}
+
+int usbip_net_recv_op_common(int sockfd, uint16_t *code)
+{
+	struct op_common op_common;
+	int rc;
+
+	memset(&op_common, 0, sizeof(op_common));
+
+	rc = usbip_net_recv(sockfd, &op_common, sizeof(op_common));
+	if (rc < 0) {
+		dbg("usbip_net_recv failed: %d", rc);
+		goto err;
+	}
+
+	PACK_OP_COMMON(0, &op_common);
+
+	if (op_common.version != USBIP_VERSION) {
+		dbg("version mismatch: %d %d", op_common.version,
+		    USBIP_VERSION);
+		goto err;
+	}
+
+	switch (*code) {
+	case OP_UNSPEC:
+		break;
+	default:
+		if (op_common.code != *code) {
+			dbg("unexpected pdu %#0x for %#0x", op_common.code,
+			    *code);
+			goto err;
+		}
+	}
+
+	if (op_common.status != ST_OK) {
+		dbg("request failed at peer: %d", op_common.status);
+		goto err;
+	}
+
+	*code = op_common.code;
+
+	return 0;
+err:
+	return -1;
+}
+
+int usbip_net_set_reuseaddr(int sockfd)
+{
+	const int val = 1;
+	int ret;
+
+	ret = setsockopt(sockfd, SOL_SOCKET, SO_REUSEADDR, &val, sizeof(val));
+	if (ret < 0)
+		dbg("setsockopt: SO_REUSEADDR");
+
+	return ret;
+}
+
+int usbip_net_set_nodelay(int sockfd)
+{
+	const int val = 1;
+	int ret;
+
+	ret = setsockopt(sockfd, IPPROTO_TCP, TCP_NODELAY, &val, sizeof(val));
+	if (ret < 0)
+		dbg("setsockopt: TCP_NODELAY");
+
+	return ret;
+}
+
+int usbip_net_set_keepalive(int sockfd)
+{
+	const int val = 1;
+	int ret;
+
+	ret = setsockopt(sockfd, SOL_SOCKET, SO_KEEPALIVE, &val, sizeof(val));
+	if (ret < 0)
+		dbg("setsockopt: SO_KEEPALIVE");
+
+	return ret;
+}
+
+int usbip_net_set_v6only(int sockfd)
+{
+	const int val = 1;
+	int ret;
+
+	ret = setsockopt(sockfd, IPPROTO_IPV6, IPV6_V6ONLY, &val, sizeof(val));
+	if (ret < 0)
+		dbg("setsockopt: IPV6_V6ONLY");
+
+	return ret;
+}
+
+/*
+ * IPv6 Ready
+ */
+int usbip_net_tcp_connect(char *hostname, char *service)
+{
+	struct addrinfo hints, *res, *rp;
+	int sockfd;
+	int ret;
+
+	memset(&hints, 0, sizeof(hints));
+	hints.ai_family = AF_UNSPEC;
+	hints.ai_socktype = SOCK_STREAM;
+
+	/* get all possible addresses */
+	ret = getaddrinfo(hostname, service, &hints, &res);
+	if (ret < 0) {
+		dbg("getaddrinfo: %s service %s: %s", hostname, service,
+		    gai_strerror(ret));
+		return ret;
+	}
+
+	/* try the addresses */
+	for (rp = res; rp; rp = rp->ai_next) {
+		sockfd = socket(rp->ai_family, rp->ai_socktype,
+				rp->ai_protocol);
+		if (sockfd < 0)
+			continue;
+
+		/* should set TCP_NODELAY for usbip */
+		usbip_net_set_nodelay(sockfd);
+		/* TODO: write code for heartbeat */
+		usbip_net_set_keepalive(sockfd);
+
+		if (connect(sockfd, rp->ai_addr, rp->ai_addrlen) == 0)
+			break;
+
+		close(sockfd);
+	}
+
+	freeaddrinfo(res);
+
+	if (!rp)
+		return EAI_SYSTEM;
+
+	return sockfd;
+}
diff --git a/tools/usb/usbip/src/usbip_network.h b/tools/usb/usbip/src/usbip_network.h
new file mode 100644
index 000000000000..c1e875cf1078
--- /dev/null
+++ b/tools/usb/usbip/src/usbip_network.h
@@ -0,0 +1,185 @@
+/*
+ * Copyright (C) 2005-2007 Takahiro Hirofuchi
+ */
+
+#ifndef __USBIP_NETWORK_H
+#define __USBIP_NETWORK_H
+
+#ifdef HAVE_CONFIG_H
+#include "../config.h"
+#endif
+
+#include <sys/types.h>
+
+#include <stdint.h>
+
+extern int usbip_port;
+extern char *usbip_port_string;
+void usbip_setup_port_number(char *arg);
+
+/* ---------------------------------------------------------------------- */
+/* Common header for all the kinds of PDUs. */
+struct op_common {
+	uint16_t version;
+
+#define OP_REQUEST	(0x80 << 8)
+#define OP_REPLY	(0x00 << 8)
+	uint16_t code;
+
+	/* add more error code */
+#define ST_OK	0x00
+#define ST_NA	0x01
+	uint32_t status; /* op_code status (for reply) */
+
+} __attribute__((packed));
+
+#define PACK_OP_COMMON(pack, op_common)  do {\
+	usbip_net_pack_uint16_t(pack, &(op_common)->version);\
+	usbip_net_pack_uint16_t(pack, &(op_common)->code);\
+	usbip_net_pack_uint32_t(pack, &(op_common)->status);\
+} while (0)
+
+/* ---------------------------------------------------------------------- */
+/* Dummy Code */
+#define OP_UNSPEC	0x00
+#define OP_REQ_UNSPEC	OP_UNSPEC
+#define OP_REP_UNSPEC	OP_UNSPEC
+
+/* ---------------------------------------------------------------------- */
+/* Retrieve USB device information. (still not used) */
+#define OP_DEVINFO	0x02
+#define OP_REQ_DEVINFO	(OP_REQUEST | OP_DEVINFO)
+#define OP_REP_DEVINFO	(OP_REPLY   | OP_DEVINFO)
+
+struct op_devinfo_request {
+	char busid[SYSFS_BUS_ID_SIZE];
+} __attribute__((packed));
+
+struct op_devinfo_reply {
+	struct usbip_usb_device udev;
+	struct usbip_usb_interface uinf[];
+} __attribute__((packed));
+
+/* ---------------------------------------------------------------------- */
+/* Import a remote USB device. */
+#define OP_IMPORT	0x03
+#define OP_REQ_IMPORT	(OP_REQUEST | OP_IMPORT)
+#define OP_REP_IMPORT   (OP_REPLY   | OP_IMPORT)
+
+struct op_import_request {
+	char busid[SYSFS_BUS_ID_SIZE];
+} __attribute__((packed));
+
+struct op_import_reply {
+	struct usbip_usb_device udev;
+//	struct usbip_usb_interface uinf[];
+} __attribute__((packed));
+
+#define PACK_OP_IMPORT_REQUEST(pack, request)  do {\
+} while (0)
+
+#define PACK_OP_IMPORT_REPLY(pack, reply)  do {\
+	usbip_net_pack_usb_device(pack, &(reply)->udev);\
+} while (0)
+
+/* ---------------------------------------------------------------------- */
+/* Export a USB device to a remote host. */
+#define OP_EXPORT	0x06
+#define OP_REQ_EXPORT	(OP_REQUEST | OP_EXPORT)
+#define OP_REP_EXPORT	(OP_REPLY   | OP_EXPORT)
+
+struct op_export_request {
+	struct usbip_usb_device udev;
+} __attribute__((packed));
+
+struct op_export_reply {
+	int returncode;
+} __attribute__((packed));
+
+
+#define PACK_OP_EXPORT_REQUEST(pack, request)  do {\
+	usbip_net_pack_usb_device(pack, &(request)->udev);\
+} while (0)
+
+#define PACK_OP_EXPORT_REPLY(pack, reply)  do {\
+} while (0)
+
+/* ---------------------------------------------------------------------- */
+/* un-Export a USB device from a remote host. */
+#define OP_UNEXPORT	0x07
+#define OP_REQ_UNEXPORT	(OP_REQUEST | OP_UNEXPORT)
+#define OP_REP_UNEXPORT	(OP_REPLY   | OP_UNEXPORT)
+
+struct op_unexport_request {
+	struct usbip_usb_device udev;
+} __attribute__((packed));
+
+struct op_unexport_reply {
+	int returncode;
+} __attribute__((packed));
+
+#define PACK_OP_UNEXPORT_REQUEST(pack, request)  do {\
+	usbip_net_pack_usb_device(pack, &(request)->udev);\
+} while (0)
+
+#define PACK_OP_UNEXPORT_REPLY(pack, reply)  do {\
+} while (0)
+
+/* ---------------------------------------------------------------------- */
+/* Negotiate IPSec encryption key. (still not used) */
+#define OP_CRYPKEY	0x04
+#define OP_REQ_CRYPKEY	(OP_REQUEST | OP_CRYPKEY)
+#define OP_REP_CRYPKEY	(OP_REPLY   | OP_CRYPKEY)
+
+struct op_crypkey_request {
+	/* 128bit key */
+	uint32_t key[4];
+} __attribute__((packed));
+
+struct op_crypkey_reply {
+	uint32_t __reserved;
+} __attribute__((packed));
+
+
+/* ---------------------------------------------------------------------- */
+/* Retrieve the list of exported USB devices. */
+#define OP_DEVLIST	0x05
+#define OP_REQ_DEVLIST	(OP_REQUEST | OP_DEVLIST)
+#define OP_REP_DEVLIST	(OP_REPLY   | OP_DEVLIST)
+
+struct op_devlist_request {
+} __attribute__((packed));
+
+struct op_devlist_reply {
+	uint32_t ndev;
+	/* followed by reply_extra[] */
+} __attribute__((packed));
+
+struct op_devlist_reply_extra {
+	struct usbip_usb_device    udev;
+	struct usbip_usb_interface uinf[];
+} __attribute__((packed));
+
+#define PACK_OP_DEVLIST_REQUEST(pack, request)  do {\
+} while (0)
+
+#define PACK_OP_DEVLIST_REPLY(pack, reply)  do {\
+	usbip_net_pack_uint32_t(pack, &(reply)->ndev);\
+} while (0)
+
+void usbip_net_pack_uint32_t(int pack, uint32_t *num);
+void usbip_net_pack_uint16_t(int pack, uint16_t *num);
+void usbip_net_pack_usb_device(int pack, struct usbip_usb_device *udev);
+void usbip_net_pack_usb_interface(int pack, struct usbip_usb_interface *uinf);
+
+ssize_t usbip_net_recv(int sockfd, void *buff, size_t bufflen);
+ssize_t usbip_net_send(int sockfd, void *buff, size_t bufflen);
+int usbip_net_send_op_common(int sockfd, uint32_t code, uint32_t status);
+int usbip_net_recv_op_common(int sockfd, uint16_t *code);
+int usbip_net_set_reuseaddr(int sockfd);
+int usbip_net_set_nodelay(int sockfd);
+int usbip_net_set_keepalive(int sockfd);
+int usbip_net_set_v6only(int sockfd);
+int usbip_net_tcp_connect(char *hostname, char *port);
+
+#endif /* __USBIP_NETWORK_H */
diff --git a/tools/usb/usbip/src/usbip_port.c b/tools/usb/usbip/src/usbip_port.c
new file mode 100644
index 000000000000..a2e884fd9226
--- /dev/null
+++ b/tools/usb/usbip/src/usbip_port.c
@@ -0,0 +1,57 @@
+/*
+ * Copyright (C) 2011 matt mooney <mfm@muteddisk.com>
+ *               2005-2007 Takahiro Hirofuchi
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "vhci_driver.h"
+#include "usbip_common.h"
+
+static int list_imported_devices(void)
+{
+	int i;
+	struct usbip_imported_device *idev;
+	int ret;
+
+	ret = usbip_vhci_driver_open();
+	if (ret < 0) {
+		err("open vhci_driver");
+		return -1;
+	}
+
+	printf("Imported USB devices\n");
+	printf("====================\n");
+
+	for (i = 0; i < vhci_driver->nports; i++) {
+		idev = &vhci_driver->idev[i];
+
+		if (usbip_vhci_imported_device_dump(idev) < 0)
+			ret = -1;
+	}
+
+	usbip_vhci_driver_close();
+
+	return ret;
+
+}
+
+int usbip_port_show(__attribute__((unused)) int argc,
+		    __attribute__((unused)) char *argv[])
+{
+	int ret;
+
+	ret = list_imported_devices();
+	if (ret < 0)
+		err("list imported devices");
+
+	return ret;
+}
diff --git a/tools/usb/usbip/src/usbip_unbind.c b/tools/usb/usbip/src/usbip_unbind.c
new file mode 100644
index 000000000000..a4a496c9cbaf
--- /dev/null
+++ b/tools/usb/usbip/src/usbip_unbind.c
@@ -0,0 +1,141 @@
+/*
+ * Copyright (C) 2011 matt mooney <mfm@muteddisk.com>
+ *               2005-2007 Takahiro Hirofuchi
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <libudev.h>
+
+#include <errno.h>
+#include <stdio.h>
+#include <string.h>
+
+#include <getopt.h>
+
+#include "usbip_common.h"
+#include "utils.h"
+#include "usbip.h"
+#include "sysfs_utils.h"
+
+static const char usbip_unbind_usage_string[] =
+	"usbip unbind <args>\n"
+	"    -b, --busid=<busid>    Unbind " USBIP_HOST_DRV_NAME ".ko from "
+	"device on <busid>\n";
+
+void usbip_unbind_usage(void)
+{
+	printf("usage: %s", usbip_unbind_usage_string);
+}
+
+static int unbind_device(char *busid)
+{
+	char bus_type[] = "usb";
+	int rc, ret = -1;
+
+	char unbind_attr_name[] = "unbind";
+	char unbind_attr_path[SYSFS_PATH_MAX];
+	char rebind_attr_name[] = "rebind";
+	char rebind_attr_path[SYSFS_PATH_MAX];
+
+	struct udev *udev;
+	struct udev_device *dev;
+	const char *driver;
+
+	/* Create libudev context. */
+	udev = udev_new();
+
+	/* Check whether the device with this bus ID exists. */
+	dev = udev_device_new_from_subsystem_sysname(udev, "usb", busid);
+	if (!dev) {
+		err("device with the specified bus ID does not exist");
+		goto err_close_udev;
+	}
+
+	/* Check whether the device is using usbip-host driver. */
+	driver = udev_device_get_driver(dev);
+	if (!driver || strcmp(driver, "usbip-host")) {
+		err("device is not bound to usbip-host driver");
+		goto err_close_udev;
+	}
+
+	/* Unbind device from driver. */
+	snprintf(unbind_attr_path, sizeof(unbind_attr_path), "%s/%s/%s/%s/%s/%s",
+		 SYSFS_MNT_PATH, SYSFS_BUS_NAME, bus_type, SYSFS_DRIVERS_NAME,
+		 USBIP_HOST_DRV_NAME, unbind_attr_name);
+
+	rc = write_sysfs_attribute(unbind_attr_path, busid, strlen(busid));
+	if (rc < 0) {
+		err("error unbinding device %s from driver", busid);
+		goto err_close_udev;
+	}
+
+	/* Notify driver of unbind. */
+	rc = modify_match_busid(busid, 0);
+	if (rc < 0) {
+		err("unable to unbind device on %s", busid);
+		goto err_close_udev;
+	}
+
+	/* Trigger new probing. */
+	snprintf(rebind_attr_path, sizeof(unbind_attr_path), "%s/%s/%s/%s/%s/%s",
+			SYSFS_MNT_PATH, SYSFS_BUS_NAME, bus_type, SYSFS_DRIVERS_NAME,
+			USBIP_HOST_DRV_NAME, rebind_attr_name);
+
+	rc = write_sysfs_attribute(rebind_attr_path, busid, strlen(busid));
+	if (rc < 0) {
+		err("error rebinding");
+		goto err_close_udev;
+	}
+
+	ret = 0;
+	info("unbind device on busid %s: complete", busid);
+
+err_close_udev:
+	udev_device_unref(dev);
+	udev_unref(udev);
+
+	return ret;
+}
+
+int usbip_unbind(int argc, char *argv[])
+{
+	static const struct option opts[] = {
+		{ "busid", required_argument, NULL, 'b' },
+		{ NULL,    0,                 NULL,  0  }
+	};
+
+	int opt;
+	int ret = -1;
+
+	for (;;) {
+		opt = getopt_long(argc, argv, "b:", opts, NULL);
+
+		if (opt == -1)
+			break;
+
+		switch (opt) {
+		case 'b':
+			ret = unbind_device(optarg);
+			goto out;
+		default:
+			goto err_out;
+		}
+	}
+
+err_out:
+	usbip_unbind_usage();
+out:
+	return ret;
+}
diff --git a/tools/usb/usbip/src/usbipd.c b/tools/usb/usbip/src/usbipd.c
new file mode 100644
index 000000000000..2f87f2d348ba
--- /dev/null
+++ b/tools/usb/usbip/src/usbipd.c
@@ -0,0 +1,679 @@
+/*
+ * Copyright (C) 2011 matt mooney <mfm@muteddisk.com>
+ *               2005-2007 Takahiro Hirofuchi
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifdef HAVE_CONFIG_H
+#include "../config.h"
+#endif
+
+#define _GNU_SOURCE
+#include <errno.h>
+#include <unistd.h>
+#include <netdb.h>
+#include <string.h>
+#include <stdlib.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <arpa/inet.h>
+#include <sys/socket.h>
+#include <netinet/in.h>
+
+#ifdef HAVE_LIBWRAP
+#include <tcpd.h>
+#endif
+
+#include <getopt.h>
+#include <signal.h>
+#include <poll.h>
+
+#include "usbip_host_driver.h"
+#include "usbip_common.h"
+#include "usbip_network.h"
+#include "list.h"
+
+#undef  PROGNAME
+#define PROGNAME "usbipd"
+#define MAXSOCKFD 20
+
+#define MAIN_LOOP_TIMEOUT 10
+
+#define DEFAULT_PID_FILE "/var/run/" PROGNAME ".pid"
+
+static const char usbip_version_string[] = PACKAGE_STRING;
+
+static const char usbipd_help_string[] =
+	"usage: usbipd [options]\n"
+	"\n"
+	"	-4, --ipv4\n"
+	"		Bind to IPv4. Default is both.\n"
+	"\n"
+	"	-6, --ipv6\n"
+	"		Bind to IPv6. Default is both.\n"
+	"\n"
+	"	-D, --daemon\n"
+	"		Run as a daemon process.\n"
+	"\n"
+	"	-d, --debug\n"
+	"		Print debugging information.\n"
+	"\n"
+	"	-PFILE, --pid FILE\n"
+	"		Write process id to FILE.\n"
+	"		If no FILE specified, use " DEFAULT_PID_FILE "\n"
+	"\n"
+	"	-tPORT, --tcp-port PORT\n"
+	"		Listen on TCP/IP port PORT.\n"
+	"\n"
+	"	-h, --help\n"
+	"		Print this help.\n"
+	"\n"
+	"	-v, --version\n"
+	"		Show version.\n";
+
+static void usbipd_help(void)
+{
+	printf("%s\n", usbipd_help_string);
+}
+
+static int recv_request_import(int sockfd)
+{
+	struct op_import_request req;
+	struct op_common reply;
+	struct usbip_exported_device *edev;
+	struct usbip_usb_device pdu_udev;
+	struct list_head *i;
+	int found = 0;
+	int error = 0;
+	int rc;
+
+	memset(&req, 0, sizeof(req));
+	memset(&reply, 0, sizeof(reply));
+
+	rc = usbip_net_recv(sockfd, &req, sizeof(req));
+	if (rc < 0) {
+		dbg("usbip_net_recv failed: import request");
+		return -1;
+	}
+	PACK_OP_IMPORT_REQUEST(0, &req);
+
+	list_for_each(i, &host_driver->edev_list) {
+		edev = list_entry(i, struct usbip_exported_device, node);
+		if (!strncmp(req.busid, edev->udev.busid, SYSFS_BUS_ID_SIZE)) {
+			info("found requested device: %s", req.busid);
+			found = 1;
+			break;
+		}
+	}
+
+	if (found) {
+		/* should set TCP_NODELAY for usbip */
+		usbip_net_set_nodelay(sockfd);
+
+		/* export device needs a TCP/IP socket descriptor */
+		rc = usbip_host_export_device(edev, sockfd);
+		if (rc < 0)
+			error = 1;
+	} else {
+		info("requested device not found: %s", req.busid);
+		error = 1;
+	}
+
+	rc = usbip_net_send_op_common(sockfd, OP_REP_IMPORT,
+				      (!error ? ST_OK : ST_NA));
+	if (rc < 0) {
+		dbg("usbip_net_send_op_common failed: %#0x", OP_REP_IMPORT);
+		return -1;
+	}
+
+	if (error) {
+		dbg("import request busid %s: failed", req.busid);
+		return -1;
+	}
+
+	memcpy(&pdu_udev, &edev->udev, sizeof(pdu_udev));
+	usbip_net_pack_usb_device(1, &pdu_udev);
+
+	rc = usbip_net_send(sockfd, &pdu_udev, sizeof(pdu_udev));
+	if (rc < 0) {
+		dbg("usbip_net_send failed: devinfo");
+		return -1;
+	}
+
+	dbg("import request busid %s: complete", req.busid);
+
+	return 0;
+}
+
+static int send_reply_devlist(int connfd)
+{
+	struct usbip_exported_device *edev;
+	struct usbip_usb_device pdu_udev;
+	struct usbip_usb_interface pdu_uinf;
+	struct op_devlist_reply reply;
+	struct list_head *j;
+	int rc, i;
+
+	reply.ndev = 0;
+	/* number of exported devices */
+	list_for_each(j, &host_driver->edev_list) {
+		reply.ndev += 1;
+	}
+	info("exportable devices: %d", reply.ndev);
+
+	rc = usbip_net_send_op_common(connfd, OP_REP_DEVLIST, ST_OK);
+	if (rc < 0) {
+		dbg("usbip_net_send_op_common failed: %#0x", OP_REP_DEVLIST);
+		return -1;
+	}
+	PACK_OP_DEVLIST_REPLY(1, &reply);
+
+	rc = usbip_net_send(connfd, &reply, sizeof(reply));
+	if (rc < 0) {
+		dbg("usbip_net_send failed: %#0x", OP_REP_DEVLIST);
+		return -1;
+	}
+
+	list_for_each(j, &host_driver->edev_list) {
+		edev = list_entry(j, struct usbip_exported_device, node);
+		dump_usb_device(&edev->udev);
+		memcpy(&pdu_udev, &edev->udev, sizeof(pdu_udev));
+		usbip_net_pack_usb_device(1, &pdu_udev);
+
+		rc = usbip_net_send(connfd, &pdu_udev, sizeof(pdu_udev));
+		if (rc < 0) {
+			dbg("usbip_net_send failed: pdu_udev");
+			return -1;
+		}
+
+		for (i = 0; i < edev->udev.bNumInterfaces; i++) {
+			dump_usb_interface(&edev->uinf[i]);
+			memcpy(&pdu_uinf, &edev->uinf[i], sizeof(pdu_uinf));
+			usbip_net_pack_usb_interface(1, &pdu_uinf);
+
+			rc = usbip_net_send(connfd, &pdu_uinf,
+					sizeof(pdu_uinf));
+			if (rc < 0) {
+				err("usbip_net_send failed: pdu_uinf");
+				return -1;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int recv_request_devlist(int connfd)
+{
+	struct op_devlist_request req;
+	int rc;
+
+	memset(&req, 0, sizeof(req));
+
+	rc = usbip_net_recv(connfd, &req, sizeof(req));
+	if (rc < 0) {
+		dbg("usbip_net_recv failed: devlist request");
+		return -1;
+	}
+
+	rc = send_reply_devlist(connfd);
+	if (rc < 0) {
+		dbg("send_reply_devlist failed");
+		return -1;
+	}
+
+	return 0;
+}
+
+static int recv_pdu(int connfd)
+{
+	uint16_t code = OP_UNSPEC;
+	int ret;
+
+	ret = usbip_net_recv_op_common(connfd, &code);
+	if (ret < 0) {
+		dbg("could not receive opcode: %#0x", code);
+		return -1;
+	}
+
+	ret = usbip_host_refresh_device_list();
+	if (ret < 0) {
+		dbg("could not refresh device list: %d", ret);
+		return -1;
+	}
+
+	info("received request: %#0x(%d)", code, connfd);
+	switch (code) {
+	case OP_REQ_DEVLIST:
+		ret = recv_request_devlist(connfd);
+		break;
+	case OP_REQ_IMPORT:
+		ret = recv_request_import(connfd);
+		break;
+	case OP_REQ_DEVINFO:
+	case OP_REQ_CRYPKEY:
+	default:
+		err("received an unknown opcode: %#0x", code);
+		ret = -1;
+	}
+
+	if (ret == 0)
+		info("request %#0x(%d): complete", code, connfd);
+	else
+		info("request %#0x(%d): failed", code, connfd);
+
+	return ret;
+}
+
+#ifdef HAVE_LIBWRAP
+static int tcpd_auth(int connfd)
+{
+	struct request_info request;
+	int rc;
+
+	request_init(&request, RQ_DAEMON, PROGNAME, RQ_FILE, connfd, 0);
+	fromhost(&request);
+	rc = hosts_access(&request);
+	if (rc == 0)
+		return -1;
+
+	return 0;
+}
+#endif
+
+static int do_accept(int listenfd)
+{
+	int connfd;
+	struct sockaddr_storage ss;
+	socklen_t len = sizeof(ss);
+	char host[NI_MAXHOST], port[NI_MAXSERV];
+	int rc;
+
+	memset(&ss, 0, sizeof(ss));
+
+	connfd = accept(listenfd, (struct sockaddr *)&ss, &len);
+	if (connfd < 0) {
+		err("failed to accept connection");
+		return -1;
+	}
+
+	rc = getnameinfo((struct sockaddr *)&ss, len, host, sizeof(host),
+			 port, sizeof(port), NI_NUMERICHOST | NI_NUMERICSERV);
+	if (rc)
+		err("getnameinfo: %s", gai_strerror(rc));
+
+#ifdef HAVE_LIBWRAP
+	rc = tcpd_auth(connfd);
+	if (rc < 0) {
+		info("denied access from %s", host);
+		close(connfd);
+		return -1;
+	}
+#endif
+	info("connection from %s:%s", host, port);
+
+	return connfd;
+}
+
+int process_request(int listenfd)
+{
+	pid_t childpid;
+	int connfd;
+
+	connfd = do_accept(listenfd);
+	if (connfd < 0)
+		return -1;
+	childpid = fork();
+	if (childpid == 0) {
+		close(listenfd);
+		recv_pdu(connfd);
+		exit(0);
+	}
+	close(connfd);
+	return 0;
+}
+
+static void addrinfo_to_text(struct addrinfo *ai, char buf[],
+			     const size_t buf_size)
+{
+	char hbuf[NI_MAXHOST];
+	char sbuf[NI_MAXSERV];
+	int rc;
+
+	buf[0] = '\0';
+
+	rc = getnameinfo(ai->ai_addr, ai->ai_addrlen, hbuf, sizeof(hbuf),
+			 sbuf, sizeof(sbuf), NI_NUMERICHOST | NI_NUMERICSERV);
+	if (rc)
+		err("getnameinfo: %s", gai_strerror(rc));
+
+	snprintf(buf, buf_size, "%s:%s", hbuf, sbuf);
+}
+
+static int listen_all_addrinfo(struct addrinfo *ai_head, int sockfdlist[],
+			     int maxsockfd)
+{
+	struct addrinfo *ai;
+	int ret, nsockfd = 0;
+	const size_t ai_buf_size = NI_MAXHOST + NI_MAXSERV + 2;
+	char ai_buf[ai_buf_size];
+
+	for (ai = ai_head; ai && nsockfd < maxsockfd; ai = ai->ai_next) {
+		int sock;
+
+		addrinfo_to_text(ai, ai_buf, ai_buf_size);
+		dbg("opening %s", ai_buf);
+		sock = socket(ai->ai_family, ai->ai_socktype, ai->ai_protocol);
+		if (sock < 0) {
+			err("socket: %s: %d (%s)",
+			    ai_buf, errno, strerror(errno));
+			continue;
+		}
+
+		usbip_net_set_reuseaddr(sock);
+		usbip_net_set_nodelay(sock);
+		/* We use seperate sockets for IPv4 and IPv6
+		 * (see do_standalone_mode()) */
+		usbip_net_set_v6only(sock);
+
+		if (sock >= FD_SETSIZE) {
+			err("FD_SETSIZE: %s: sock=%d, max=%d",
+			    ai_buf, sock, FD_SETSIZE);
+			close(sock);
+			continue;
+		}
+
+		ret = bind(sock, ai->ai_addr, ai->ai_addrlen);
+		if (ret < 0) {
+			err("bind: %s: %d (%s)",
+			    ai_buf, errno, strerror(errno));
+			close(sock);
+			continue;
+		}
+
+		ret = listen(sock, SOMAXCONN);
+		if (ret < 0) {
+			err("listen: %s: %d (%s)",
+			    ai_buf, errno, strerror(errno));
+			close(sock);
+			continue;
+		}
+
+		info("listening on %s", ai_buf);
+		sockfdlist[nsockfd++] = sock;
+	}
+
+	return nsockfd;
+}
+
+static struct addrinfo *do_getaddrinfo(char *host, int ai_family)
+{
+	struct addrinfo hints, *ai_head;
+	int rc;
+
+	memset(&hints, 0, sizeof(hints));
+	hints.ai_family   = ai_family;
+	hints.ai_socktype = SOCK_STREAM;
+	hints.ai_flags    = AI_PASSIVE;
+
+	rc = getaddrinfo(host, usbip_port_string, &hints, &ai_head);
+	if (rc) {
+		err("failed to get a network address %s: %s", usbip_port_string,
+		    gai_strerror(rc));
+		return NULL;
+	}
+
+	return ai_head;
+}
+
+static void signal_handler(int i)
+{
+	dbg("received '%s' signal", strsignal(i));
+}
+
+static void set_signal(void)
+{
+	struct sigaction act;
+
+	memset(&act, 0, sizeof(act));
+	act.sa_handler = signal_handler;
+	sigemptyset(&act.sa_mask);
+	sigaction(SIGTERM, &act, NULL);
+	sigaction(SIGINT, &act, NULL);
+	act.sa_handler = SIG_IGN;
+	sigaction(SIGCLD, &act, NULL);
+}
+
+static const char *pid_file;
+
+static void write_pid_file(void)
+{
+	if (pid_file) {
+		dbg("creating pid file %s", pid_file);
+		FILE *fp;
+
+		fp = fopen(pid_file, "w");
+		if (!fp) {
+			err("pid_file: %s: %d (%s)",
+			    pid_file, errno, strerror(errno));
+			return;
+		}
+		fprintf(fp, "%d\n", getpid());
+		fclose(fp);
+	}
+}
+
+static void remove_pid_file(void)
+{
+	if (pid_file) {
+		dbg("removing pid file %s", pid_file);
+		unlink(pid_file);
+	}
+}
+
+static int do_standalone_mode(int daemonize, int ipv4, int ipv6)
+{
+	struct addrinfo *ai_head;
+	int sockfdlist[MAXSOCKFD];
+	int nsockfd, family;
+	int i, terminate;
+	struct pollfd *fds;
+	struct timespec timeout;
+	sigset_t sigmask;
+
+	if (usbip_host_driver_open()) {
+		err("please load " USBIP_CORE_MOD_NAME ".ko and "
+		    USBIP_HOST_DRV_NAME ".ko!");
+		return -1;
+	}
+
+	if (daemonize) {
+		if (daemon(0, 0) < 0) {
+			err("daemonizing failed: %s", strerror(errno));
+			usbip_host_driver_close();
+			return -1;
+		}
+		umask(0);
+		usbip_use_syslog = 1;
+	}
+	set_signal();
+	write_pid_file();
+
+	info("starting " PROGNAME " (%s)", usbip_version_string);
+
+	/*
+	 * To suppress warnings on systems with bindv6only disabled
+	 * (default), we use seperate sockets for IPv6 and IPv4 and set
+	 * IPV6_V6ONLY on the IPv6 sockets.
+	 */
+	if (ipv4 && ipv6)
+		family = AF_UNSPEC;
+	else if (ipv4)
+		family = AF_INET;
+	else
+		family = AF_INET6;
+
+	ai_head = do_getaddrinfo(NULL, family);
+	if (!ai_head) {
+		usbip_host_driver_close();
+		return -1;
+	}
+	nsockfd = listen_all_addrinfo(ai_head, sockfdlist,
+		sizeof(sockfdlist) / sizeof(*sockfdlist));
+	freeaddrinfo(ai_head);
+	if (nsockfd <= 0) {
+		err("failed to open a listening socket");
+		usbip_host_driver_close();
+		return -1;
+	}
+
+	dbg("listening on %d address%s", nsockfd, (nsockfd == 1) ? "" : "es");
+
+	fds = calloc(nsockfd, sizeof(struct pollfd));
+	for (i = 0; i < nsockfd; i++) {
+		fds[i].fd = sockfdlist[i];
+		fds[i].events = POLLIN;
+	}
+	timeout.tv_sec = MAIN_LOOP_TIMEOUT;
+	timeout.tv_nsec = 0;
+
+	sigfillset(&sigmask);
+	sigdelset(&sigmask, SIGTERM);
+	sigdelset(&sigmask, SIGINT);
+
+	terminate = 0;
+	while (!terminate) {
+		int r;
+
+		r = ppoll(fds, nsockfd, &timeout, &sigmask);
+		if (r < 0) {
+			dbg("%s", strerror(errno));
+			terminate = 1;
+		} else if (r) {
+			for (i = 0; i < nsockfd; i++) {
+				if (fds[i].revents & POLLIN) {
+					dbg("read event on fd[%d]=%d",
+					    i, sockfdlist[i]);
+					process_request(sockfdlist[i]);
+				}
+			}
+		} else {
+			dbg("heartbeat timeout on ppoll()");
+		}
+	}
+
+	info("shutting down " PROGNAME);
+	free(fds);
+	usbip_host_driver_close();
+
+	return 0;
+}
+
+int main(int argc, char *argv[])
+{
+	static const struct option longopts[] = {
+		{ "ipv4",     no_argument,       NULL, '4' },
+		{ "ipv6",     no_argument,       NULL, '6' },
+		{ "daemon",   no_argument,       NULL, 'D' },
+		{ "daemon",   no_argument,       NULL, 'D' },
+		{ "debug",    no_argument,       NULL, 'd' },
+		{ "pid",      optional_argument, NULL, 'P' },
+		{ "tcp-port", required_argument, NULL, 't' },
+		{ "help",     no_argument,       NULL, 'h' },
+		{ "version",  no_argument,       NULL, 'v' },
+		{ NULL,	      0,                 NULL,  0  }
+	};
+
+	enum {
+		cmd_standalone_mode = 1,
+		cmd_help,
+		cmd_version
+	} cmd;
+
+	int daemonize = 0;
+	int ipv4 = 0, ipv6 = 0;
+	int opt, rc = -1;
+
+	pid_file = NULL;
+
+	usbip_use_stderr = 1;
+	usbip_use_syslog = 0;
+
+	if (geteuid() != 0)
+		err("not running as root?");
+
+	cmd = cmd_standalone_mode;
+	for (;;) {
+		opt = getopt_long(argc, argv, "46DdP::t:hv", longopts, NULL);
+
+		if (opt == -1)
+			break;
+
+		switch (opt) {
+		case '4':
+			ipv4 = 1;
+			break;
+		case '6':
+			ipv6 = 1;
+			break;
+		case 'D':
+			daemonize = 1;
+			break;
+		case 'd':
+			usbip_use_debug = 1;
+			break;
+		case 'h':
+			cmd = cmd_help;
+			break;
+		case 'P':
+			pid_file = optarg ? optarg : DEFAULT_PID_FILE;
+			break;
+		case 't':
+			usbip_setup_port_number(optarg);
+			break;
+		case 'v':
+			cmd = cmd_version;
+			break;
+		case '?':
+			usbipd_help();
+		default:
+			goto err_out;
+		}
+	}
+
+	if (!ipv4 && !ipv6)
+		ipv4 = ipv6 = 1;
+
+	switch (cmd) {
+	case cmd_standalone_mode:
+		rc = do_standalone_mode(daemonize, ipv4, ipv6);
+		remove_pid_file();
+		break;
+	case cmd_version:
+		printf(PROGNAME " (%s)\n", usbip_version_string);
+		rc = 0;
+		break;
+	case cmd_help:
+		usbipd_help();
+		rc = 0;
+		break;
+	default:
+		usbipd_help();
+		goto err_out;
+	}
+
+err_out:
+	return (rc > -1 ? EXIT_SUCCESS : EXIT_FAILURE);
+}
diff --git a/tools/usb/usbip/src/utils.c b/tools/usb/usbip/src/utils.c
new file mode 100644
index 000000000000..2b3d6d235015
--- /dev/null
+++ b/tools/usb/usbip/src/utils.c
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2011 matt mooney <mfm@muteddisk.com>
+ *               2005-2007 Takahiro Hirofuchi
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <errno.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "usbip_common.h"
+#include "utils.h"
+#include "sysfs_utils.h"
+
+int modify_match_busid(char *busid, int add)
+{
+	char attr_name[] = "match_busid";
+	char command[SYSFS_BUS_ID_SIZE + 4];
+	char match_busid_attr_path[SYSFS_PATH_MAX];
+	int rc;
+
+	snprintf(match_busid_attr_path, sizeof(match_busid_attr_path),
+		 "%s/%s/%s/%s/%s/%s", SYSFS_MNT_PATH, SYSFS_BUS_NAME,
+		 SYSFS_BUS_TYPE, SYSFS_DRIVERS_NAME, USBIP_HOST_DRV_NAME,
+		 attr_name);
+
+	if (add)
+		snprintf(command, SYSFS_BUS_ID_SIZE + 4, "add %s", busid);
+	else
+		snprintf(command, SYSFS_BUS_ID_SIZE + 4, "del %s", busid);
+
+	rc = write_sysfs_attribute(match_busid_attr_path, command,
+				   sizeof(command));
+	if (rc < 0) {
+		dbg("failed to write match_busid: %s", strerror(errno));
+		return -1;
+	}
+
+	return 0;
+}
diff --git a/tools/usb/usbip/src/utils.h b/tools/usb/usbip/src/utils.h
new file mode 100644
index 000000000000..5916fd3e02a6
--- /dev/null
+++ b/tools/usb/usbip/src/utils.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2011 matt mooney <mfm@muteddisk.com>
+ *               2005-2007 Takahiro Hirofuchi
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __UTILS_H
+#define __UTILS_H
+
+int modify_match_busid(char *busid, int add);
+
+#endif /* __UTILS_H */
+