diff options
-rw-r--r-- | Documentation/vm/numa_memory_policy.txt | 54 | ||||
-rw-r--r-- | mm/mempolicy.c | 68 |
2 files changed, 60 insertions, 62 deletions
diff --git a/Documentation/vm/numa_memory_policy.txt b/Documentation/vm/numa_memory_policy.txt index 6719d642653f..13cca5a3cf17 100644 --- a/Documentation/vm/numa_memory_policy.txt +++ b/Documentation/vm/numa_memory_policy.txt @@ -147,35 +147,18 @@ Components of Memory Policies Linux memory policy supports the following 4 behavioral modes: - Default Mode--MPOL_DEFAULT: The behavior specified by this mode is - context or scope dependent. - - As mentioned in the Policy Scope section above, during normal - system operation, the System Default Policy is hard coded to - contain the Default mode. - - In this context, default mode means "local" allocation--that is - attempt to allocate the page from the node associated with the cpu - where the fault occurs. If the "local" node has no memory, or the - node's memory can be exhausted [no free pages available], local - allocation will "fallback to"--attempt to allocate pages from-- - "nearby" nodes, in order of increasing "distance". - - Implementation detail -- subject to change: "Fallback" uses - a per node list of sibling nodes--called zonelists--built at - boot time, or when nodes or memory are added or removed from - the system [memory hotplug]. These per node zonelist are - constructed with nodes in order of increasing distance based - on information provided by the platform firmware. - - When a task/process policy or a shared policy contains the Default - mode, this also means "local allocation", as described above. - - In the context of a VMA, Default mode means "fall back to task - policy"--which may or may not specify Default mode. Thus, Default - mode can not be counted on to mean local allocation when used - on a non-shared region of the address space. However, see - MPOL_PREFERRED below. + Default Mode--MPOL_DEFAULT: This mode is only used in the memory + policy APIs. Internally, MPOL_DEFAULT is converted to the NULL + memory policy in all policy scopes. Any existing non-default policy + will simply be removed when MPOL_DEFAULT is specified. As a result, + MPOL_DEFAULT means "fall back to the next most specific policy scope." + + For example, a NULL or default task policy will fall back to the + system default policy. A NULL or default vma policy will fall + back to the task policy. + + When specified in one of the memory policy APIs, the Default mode + does not use the optional set of nodes. It is an error for the set of nodes specified for this policy to be non-empty. @@ -187,19 +170,18 @@ Components of Memory Policies MPOL_PREFERRED: This mode specifies that the allocation should be attempted from the single node specified in the policy. If that - allocation fails, the kernel will search other nodes, exactly as - it would for a local allocation that started at the preferred node - in increasing distance from the preferred node. "Local" allocation - policy can be viewed as a Preferred policy that starts at the node + allocation fails, the kernel will search other nodes, in order of + increasing distance from the preferred node based on information + provided by the platform firmware. containing the cpu where the allocation takes place. Internally, the Preferred policy uses a single node--the preferred_node member of struct mempolicy. A "distinguished value of this preferred_node, currently '-1', is interpreted as "the node containing the cpu where the allocation takes - place"--local allocation. This is the way to specify - local allocation for a specific range of addresses--i.e. for - VMA policies. + place"--local allocation. "Local" allocation policy can be + viewed as a Preferred policy that starts at the node containing + the cpu where the allocation takes place. It is possible for the user to specify that local allocation is always preferred by passing an empty nodemask with this mode. diff --git a/mm/mempolicy.c b/mm/mempolicy.c index a237295f8190..fea4a5da6e44 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -104,9 +104,13 @@ static struct kmem_cache *sn_cache; policied. */ enum zone_type policy_zone = 0; +/* + * run-time system-wide default policy => local allocation + */ struct mempolicy default_policy = { .refcnt = ATOMIC_INIT(1), /* never free it */ - .mode = MPOL_DEFAULT, + .mode = MPOL_PREFERRED, + .v = { .preferred_node = -1 }, }; static const struct mempolicy_operations { @@ -189,7 +193,7 @@ static struct mempolicy *mpol_new(unsigned short mode, unsigned short flags, if (mode == MPOL_DEFAULT) { if (nodes && !nodes_empty(*nodes)) return ERR_PTR(-EINVAL); - return NULL; + return NULL; /* simply delete any existing policy */ } VM_BUG_ON(!nodes); @@ -246,7 +250,6 @@ void __mpol_put(struct mempolicy *p) { if (!atomic_dec_and_test(&p->refcnt)) return; - p->mode = MPOL_DEFAULT; kmem_cache_free(policy_cache, p); } @@ -626,13 +629,16 @@ static long do_set_mempolicy(unsigned short mode, unsigned short flags, return 0; } -/* Fill a zone bitmap for a policy */ -static void get_zonemask(struct mempolicy *p, nodemask_t *nodes) +/* + * Return nodemask for policy for get_mempolicy() query + */ +static void get_policy_nodemask(struct mempolicy *p, nodemask_t *nodes) { nodes_clear(*nodes); + if (p == &default_policy) + return; + switch (p->mode) { - case MPOL_DEFAULT: - break; case MPOL_BIND: /* Fall through */ case MPOL_INTERLEAVE: @@ -686,6 +692,11 @@ static long do_get_mempolicy(int *policy, nodemask_t *nmask, } if (flags & MPOL_F_ADDR) { + /* + * Do NOT fall back to task policy if the + * vma/shared policy at addr is NULL. We + * want to return MPOL_DEFAULT in this case. + */ down_read(&mm->mmap_sem); vma = find_vma_intersection(mm, addr, addr+1); if (!vma) { @@ -700,7 +711,7 @@ static long do_get_mempolicy(int *policy, nodemask_t *nmask, return -EINVAL; if (!pol) - pol = &default_policy; + pol = &default_policy; /* indicates default behavior */ if (flags & MPOL_F_NODE) { if (flags & MPOL_F_ADDR) { @@ -715,8 +726,11 @@ static long do_get_mempolicy(int *policy, nodemask_t *nmask, err = -EINVAL; goto out; } - } else - *policy = pol->mode | pol->flags; + } else { + *policy = pol == &default_policy ? MPOL_DEFAULT : + pol->mode; + *policy |= pol->flags; + } if (vma) { up_read(¤t->mm->mmap_sem); @@ -725,7 +739,7 @@ static long do_get_mempolicy(int *policy, nodemask_t *nmask, err = 0; if (nmask) - get_zonemask(pol, nmask); + get_policy_nodemask(pol, nmask); out: mpol_cond_put(pol); @@ -1286,8 +1300,7 @@ static struct mempolicy *get_vma_policy(struct task_struct *task, addr); if (vpol) pol = vpol; - } else if (vma->vm_policy && - vma->vm_policy->mode != MPOL_DEFAULT) + } else if (vma->vm_policy) pol = vma->vm_policy; } if (!pol) @@ -1334,7 +1347,6 @@ static struct zonelist *policy_zonelist(gfp_t gfp, struct mempolicy *policy) nd = first_node(policy->v.nodes); break; case MPOL_INTERLEAVE: /* should not happen */ - case MPOL_DEFAULT: nd = numa_node_id(); break; default: @@ -1369,9 +1381,15 @@ static unsigned interleave_nodes(struct mempolicy *policy) */ unsigned slab_node(struct mempolicy *policy) { - unsigned short pol = policy ? policy->mode : MPOL_DEFAULT; + if (!policy) + return numa_node_id(); + + switch (policy->mode) { + case MPOL_PREFERRED: + if (unlikely(policy->v.preferred_node >= 0)) + return policy->v.preferred_node; + return numa_node_id(); - switch (pol) { case MPOL_INTERLEAVE: return interleave_nodes(policy); @@ -1390,13 +1408,8 @@ unsigned slab_node(struct mempolicy *policy) return zone->node; } - case MPOL_PREFERRED: - if (policy->v.preferred_node >= 0) - return policy->v.preferred_node; - /* Fall through */ - default: - return numa_node_id(); + BUG(); } } @@ -1650,8 +1663,6 @@ int __mpol_equal(struct mempolicy *a, struct mempolicy *b) if (a->mode != MPOL_DEFAULT && !mpol_match_intent(a, b)) return 0; switch (a->mode) { - case MPOL_DEFAULT: - return 1; case MPOL_BIND: /* Fall through */ case MPOL_INTERLEAVE: @@ -1828,7 +1839,7 @@ void mpol_shared_policy_init(struct shared_policy *info, unsigned short policy, if (policy != MPOL_DEFAULT) { struct mempolicy *newpol; - /* Falls back to MPOL_DEFAULT on any error */ + /* Falls back to NULL policy [MPOL_DEFAULT] on any error */ newpol = mpol_new(policy, flags, policy_nodes); if (!IS_ERR(newpol)) { /* Create pseudo-vma that contains just the policy */ @@ -1952,9 +1963,14 @@ static inline int mpol_to_str(char *buffer, int maxlen, struct mempolicy *pol) char *p = buffer; int l; nodemask_t nodes; - unsigned short mode = pol ? pol->mode : MPOL_DEFAULT; + unsigned short mode; unsigned short flags = pol ? pol->flags : 0; + if (!pol || pol == &default_policy) + mode = MPOL_DEFAULT; + else + mode = pol->mode; + switch (mode) { case MPOL_DEFAULT: nodes_clear(nodes); |