summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/scsi/hisilicon-sas.txt69
-rw-r--r--MAINTAINERS7
-rw-r--r--drivers/block/cciss.c2
-rw-r--r--drivers/scsi/Kconfig2
-rw-r--r--drivers/scsi/Makefile1
-rw-r--r--drivers/scsi/aacraid/linit.c2
-rw-r--r--drivers/scsi/aic94xx/aic94xx_sas.h49
-rw-r--r--drivers/scsi/arcmsr/arcmsr.h14
-rw-r--r--drivers/scsi/arcmsr/arcmsr_hba.c209
-rw-r--r--drivers/scsi/atp870u.c3635
-rw-r--r--drivers/scsi/atp870u.h4
-rw-r--r--drivers/scsi/bfa/bfa.h7
-rw-r--r--drivers/scsi/bfa/bfa_core.c7
-rw-r--r--drivers/scsi/bfa/bfa_cs.h7
-rw-r--r--drivers/scsi/bfa/bfa_defs.h7
-rw-r--r--drivers/scsi/bfa/bfa_defs_fcs.h7
-rw-r--r--drivers/scsi/bfa/bfa_defs_svc.h7
-rw-r--r--drivers/scsi/bfa/bfa_fc.h7
-rw-r--r--drivers/scsi/bfa/bfa_fcbuild.c7
-rw-r--r--drivers/scsi/bfa/bfa_fcbuild.h7
-rw-r--r--drivers/scsi/bfa/bfa_fcpim.c7
-rw-r--r--drivers/scsi/bfa/bfa_fcpim.h7
-rw-r--r--drivers/scsi/bfa/bfa_fcs.c7
-rw-r--r--drivers/scsi/bfa/bfa_fcs.h9
-rw-r--r--drivers/scsi/bfa/bfa_fcs_fcpim.c7
-rw-r--r--drivers/scsi/bfa/bfa_fcs_lport.c9
-rw-r--r--drivers/scsi/bfa/bfa_fcs_rport.c7
-rw-r--r--drivers/scsi/bfa/bfa_hw_cb.c7
-rw-r--r--drivers/scsi/bfa/bfa_hw_ct.c7
-rw-r--r--drivers/scsi/bfa/bfa_ioc.c9
-rw-r--r--drivers/scsi/bfa/bfa_ioc.h7
-rw-r--r--drivers/scsi/bfa/bfa_ioc_cb.c7
-rw-r--r--drivers/scsi/bfa/bfa_ioc_ct.c7
-rw-r--r--drivers/scsi/bfa/bfa_modules.h7
-rw-r--r--drivers/scsi/bfa/bfa_plog.h7
-rw-r--r--drivers/scsi/bfa/bfa_port.c7
-rw-r--r--drivers/scsi/bfa/bfa_port.h7
-rw-r--r--drivers/scsi/bfa/bfa_svc.c7
-rw-r--r--drivers/scsi/bfa/bfa_svc.h7
-rw-r--r--drivers/scsi/bfa/bfad.c24
-rw-r--r--drivers/scsi/bfa/bfad_attr.c75
-rw-r--r--drivers/scsi/bfa/bfad_bsg.c7
-rw-r--r--drivers/scsi/bfa/bfad_bsg.h7
-rw-r--r--drivers/scsi/bfa/bfad_debugfs.c7
-rw-r--r--drivers/scsi/bfa/bfad_drv.h9
-rw-r--r--drivers/scsi/bfa/bfad_im.c35
-rw-r--r--drivers/scsi/bfa/bfad_im.h7
-rw-r--r--drivers/scsi/bfa/bfi.h7
-rw-r--r--drivers/scsi/bfa/bfi_ms.h7
-rw-r--r--drivers/scsi/bfa/bfi_reg.h9
-rw-r--r--drivers/scsi/cxlflash/common.h2
-rw-r--r--drivers/scsi/cxlflash/main.c54
-rw-r--r--drivers/scsi/cxlflash/main.h5
-rw-r--r--drivers/scsi/cxlflash/superpipe.c8
-rw-r--r--drivers/scsi/cxlflash/vlun.c2
-rw-r--r--drivers/scsi/device_handler/scsi_dh_alua.c294
-rw-r--r--drivers/scsi/hisi_sas/Kconfig6
-rw-r--r--drivers/scsi/hisi_sas/Makefile2
-rw-r--r--drivers/scsi/hisi_sas/hisi_sas.h341
-rw-r--r--drivers/scsi/hisi_sas/hisi_sas_main.c1358
-rw-r--r--drivers/scsi/hisi_sas/hisi_sas_v1_hw.c1839
-rw-r--r--drivers/scsi/hpsa.c117
-rw-r--r--drivers/scsi/hpsa.h2
-rw-r--r--drivers/scsi/hpsa_cmd.h13
-rw-r--r--drivers/scsi/initio.c16
-rw-r--r--drivers/scsi/lpfc/lpfc.h16
-rw-r--r--drivers/scsi/lpfc/lpfc_attr.c48
-rw-r--r--drivers/scsi/lpfc/lpfc_crtn.h6
-rw-r--r--drivers/scsi/lpfc/lpfc_ct.c1864
-rw-r--r--drivers/scsi/lpfc/lpfc_els.c484
-rw-r--r--drivers/scsi/lpfc/lpfc_hbadisc.c65
-rw-r--r--drivers/scsi/lpfc/lpfc_hw.h184
-rw-r--r--drivers/scsi/lpfc/lpfc_hw4.h52
-rw-r--r--drivers/scsi/lpfc/lpfc_init.c198
-rw-r--r--drivers/scsi/lpfc/lpfc_mem.c6
-rw-r--r--drivers/scsi/lpfc/lpfc_nportdisc.c134
-rw-r--r--drivers/scsi/lpfc/lpfc_scsi.c41
-rw-r--r--drivers/scsi/lpfc/lpfc_sli.c23
-rw-r--r--drivers/scsi/lpfc/lpfc_sli4.h1
-rw-r--r--drivers/scsi/lpfc/lpfc_version.h2
-rw-r--r--drivers/scsi/lpfc/lpfc_vport.c8
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_base.c4
-rw-r--r--drivers/scsi/mvsas/mv_94xx.c134
-rw-r--r--drivers/scsi/mvsas/mv_94xx.h71
-rw-r--r--drivers/scsi/mvsas/mv_init.c2
-rw-r--r--drivers/scsi/mvsas/mv_sas.c17
-rw-r--r--drivers/scsi/mvsas/mv_sas.h5
-rw-r--r--drivers/scsi/osd/osd_initiator.c5
-rw-r--r--drivers/scsi/qla2xxx/Kconfig3
-rw-r--r--drivers/scsi/qla2xxx/qla_os.c3
-rw-r--r--drivers/scsi/scsi.c20
-rw-r--r--drivers/scsi/scsi_debug.c14
-rw-r--r--drivers/scsi/scsi_dh.c72
-rw-r--r--drivers/scsi/scsi_lib.c188
-rw-r--r--drivers/scsi/scsi_priv.h3
-rw-r--r--drivers/scsi/scsi_scan.c4
-rw-r--r--drivers/scsi/scsi_sysfs.c90
-rw-r--r--drivers/scsi/scsi_transport_fc.c12
-rw-r--r--drivers/scsi/scsi_transport_sas.c30
-rw-r--r--drivers/scsi/ses.c22
-rw-r--r--drivers/scsi/st.h2
-rw-r--r--drivers/scsi/storvsc_drv.c309
-rw-r--r--drivers/scsi/ufs/ufshcd-pltfrm.c2
-rw-r--r--drivers/scsi/vmw_pvscsi.c45
-rw-r--r--drivers/scsi/vmw_pvscsi.h2
-rw-r--r--include/scsi/sas.h74
-rw-r--r--include/scsi/scsi_dbg.h2
-rw-r--r--include/scsi/scsi_device.h7
-rw-r--r--include/scsi/scsi_transport_sas.h10
-rw-r--r--include/uapi/scsi/cxlflash_ioctl.h10
110 files changed, 8178 insertions, 4565 deletions
diff --git a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
new file mode 100644
index 000000000000..f67e761bcc18
--- /dev/null
+++ b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
@@ -0,0 +1,69 @@
+* HiSilicon SAS controller
+
+The HiSilicon SAS controller supports SAS/SATA.
+
+Main node required properties:
+ - compatible : value should be as follows:
+ (a) "hisilicon,hip05-sas-v1" for v1 hw in hip05 chipset
+ - sas-addr : array of 8 bytes for host SAS address
+ - reg : Address and length of the SAS register
+ - hisilicon,sas-syscon: phandle of syscon used for sas control
+ - ctrl-reset-reg : offset to controller reset register in ctrl reg
+ - ctrl-reset-sts-reg : offset to controller reset status register in ctrl reg
+ - ctrl-clock-ena-reg : offset to controller clock enable register in ctrl reg
+ - queue-count : number of delivery and completion queues in the controller
+ - phy-count : number of phys accessible by the controller
+ - interrupts : Interrupts for phys, completion queues, and fatal
+ sources; the interrupts are ordered in 3 groups, as follows:
+ - Phy interrupts
+ - Completion queue interrupts
+ - Fatal interrupts
+ Phy interrupts : Each phy has 3 interrupt sources:
+ - broadcast
+ - phyup
+ - abnormal
+ The phy interrupts are ordered into groups of 3 per phy
+ (broadcast, phyup, and abnormal) in increasing order.
+ Completion queue interrupts : each completion queue has 1
+ interrupt source.
+ The interrupts are ordered in increasing order.
+ Fatal interrupts : the fatal interrupts are ordered as follows:
+ - ECC
+ - AXI bus
+
+Example:
+ sas0: sas@c1000000 {
+ compatible = "hisilicon,hip05-sas-v1";
+ sas-addr = [50 01 88 20 16 00 00 0a];
+ reg = <0x0 0xc1000000 0x0 0x10000>;
+ hisilicon,sas-syscon = <&pcie_sas>;
+ ctrl-reset-reg = <0xa60>;
+ ctrl-reset-sts-reg = <0x5a30>;
+ ctrl-clock-ena-reg = <0x338>;
+ queue-count = <32>;
+ phy-count = <8>;
+ dma-coherent;
+ interrupt-parent = <&mbigen_dsa>;
+ interrupts = <259 4>,<263 4>,<264 4>,/* phy0 */
+ <269 4>,<273 4>,<274 4>,/* phy1 */
+ <279 4>,<283 4>,<284 4>,/* phy2 */
+ <289 4>,<293 4>,<294 4>,/* phy3 */
+ <299 4>,<303 4>,<304 4>,/* phy4 */
+ <309 4>,<313 4>,<314 4>,/* phy5 */
+ <319 4>,<323 4>,<324 4>,/* phy6 */
+ <329 4>,<333 4>,<334 4>,/* phy7 */
+ <336 1>,<337 1>,<338 1>,/* cq0-2 */
+ <339 1>,<340 1>,<341 1>,/* cq3-5 */
+ <342 1>,<343 1>,<344 1>,/* cq6-8 */
+ <345 1>,<346 1>,<347 1>,/* cq9-11 */
+ <348 1>,<349 1>,<350 1>,/* cq12-14 */
+ <351 1>,<352 1>,<353 1>,/* cq15-17 */
+ <354 1>,<355 1>,<356 1>,/* cq18-20 */
+ <357 1>,<358 1>,<359 1>,/* cq21-23 */
+ <360 1>,<361 1>,<362 1>,/* cq24-26 */
+ <363 1>,<364 1>,<365 1>,/* cq27-29 */
+ <366 1>,<367 1>/* cq30-31 */
+ <376 4>,/* fatal ecc */
+ <381 4>;/* fatal axi */
+ status = "disabled";
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 795846fada25..a2956eb7ca95 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5038,6 +5038,13 @@ F: include/uapi/linux/if_hippi.h
F: net/802/hippi.c
F: drivers/net/hippi/
+HISILICON SAS Controller
+M: John Garry <john.garry@huawei.com>
+W: http://www.hisilicon.com
+S: Supported
+F: drivers/scsi/hisi_sas/
+F: Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
+
HOST AP DRIVER
M: Jouni Malinen <j@w1.fi>
L: hostap@shmoo.com (subscribers-only)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index b38bd06d564c..63c2064689f8 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -3848,7 +3848,7 @@ static void print_cfg_table(ctlr_info_t *h)
readl(&(tb->HostWrite.CoalIntDelay)));
dev_dbg(&h->pdev->dev, " Coalesce Interrupt Count = 0x%x\n",
readl(&(tb->HostWrite.CoalIntCount)));
- dev_dbg(&h->pdev->dev, " Max outstanding commands = 0x%d\n",
+ dev_dbg(&h->pdev->dev, " Max outstanding commands = 0x%x\n",
readl(&(tb->CmdsOutMax)));
dev_dbg(&h->pdev->dev, " Bus Types = 0x%x\n",
readl(&(tb->BusTypes)));
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 64eed87d34a8..c1fe0d2f90ca 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -194,6 +194,7 @@ config CHR_DEV_SCH
config SCSI_ENCLOSURE
tristate "SCSI Enclosure Support"
depends on SCSI && ENCLOSURE_SERVICES
+ depends on m || SCSI_SAS_ATTRS != m
help
Enclosures are devices sitting on or in SCSI backplanes that
manage devices. If you have a disk cage, the chances are that
@@ -474,6 +475,7 @@ config SCSI_AACRAID
source "drivers/scsi/aic7xxx/Kconfig.aic7xxx"
source "drivers/scsi/aic7xxx/Kconfig.aic79xx"
source "drivers/scsi/aic94xx/Kconfig"
+source "drivers/scsi/hisi_sas/Kconfig"
source "drivers/scsi/mvsas/Kconfig"
config SCSI_MVUMI
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index c14bca4a9675..862ab4efad61 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -157,6 +157,7 @@ obj-$(CONFIG_CHR_DEV_SCH) += ch.o
obj-$(CONFIG_SCSI_ENCLOSURE) += ses.o
obj-$(CONFIG_SCSI_OSD_INITIATOR) += osd/
+obj-$(CONFIG_SCSI_HISI_SAS) += hisi_sas/
# This goes last, so that "real" scsi devices probe earlier
obj-$(CONFIG_SCSI_DEBUG) += scsi_debug.o
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 3b6e5c67e853..76eaa38ffd6e 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -1318,7 +1318,7 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
}
#if (defined(CONFIG_PM))
-void aac_release_resources(struct aac_dev *aac)
+static void aac_release_resources(struct aac_dev *aac)
{
int i;
diff --git a/drivers/scsi/aic94xx/aic94xx_sas.h b/drivers/scsi/aic94xx/aic94xx_sas.h
index 912e6b755f74..101072cab70f 100644
--- a/drivers/scsi/aic94xx/aic94xx_sas.h
+++ b/drivers/scsi/aic94xx/aic94xx_sas.h
@@ -327,46 +327,9 @@ struct scb_header {
#define LUN_SIZE 8
-/* See SAS spec, task IU
- */
-struct ssp_task_iu {
- u8 lun[LUN_SIZE]; /* BE */
- u16 _r_a;
- u8 tmf;
- u8 _r_b;
- __be16 tag; /* BE */
- u8 _r_c[14];
-} __attribute__ ((packed));
-
-/* See SAS spec, command IU
- */
-struct ssp_command_iu {
- u8 lun[LUN_SIZE];
- u8 _r_a;
- u8 efb_prio_attr; /* enable first burst, task prio & attr */
-#define EFB_MASK 0x80
-#define TASK_PRIO_MASK 0x78
-#define TASK_ATTR_MASK 0x07
-
- u8 _r_b;
- u8 add_cdb_len; /* in dwords, since bit 0,1 are reserved */
- union {
- u8 cdb[16];
- struct {
- __le64 long_cdb_addr; /* bus address, LE */
- __le32 long_cdb_size; /* LE */
- u8 _r_c[3];
- u8 eol_ds; /* eol:6,6, ds:5,4 */
- } long_cdb; /* sequencer extension */
- };
-} __attribute__ ((packed));
-
-struct xfer_rdy_iu {
- __be32 requested_offset; /* BE */
- __be32 write_data_len; /* BE */
- __be32 _r_a;
-} __attribute__ ((packed));
-
+#define EFB_MASK 0x80
+#define TASK_PRIO_MASK 0x78
+#define TASK_ATTR_MASK 0x07
/* ---------- SCB tasks ---------- */
/* This is both ssp_task and long_ssp_task
@@ -511,7 +474,7 @@ struct abort_task {
u8 proto_conn_rate;
__le32 _r_a;
struct ssp_frame_hdr ssp_frame;
- struct ssp_task_iu ssp_task;
+ struct ssp_tmf_iu ssp_task;
__le16 sister_scb;
__le16 conn_handle;
u8 flags; /* ovrd_itnl_timer:3,3, suspend_data_trans:2,2 */
@@ -549,7 +512,7 @@ struct clear_nexus {
u8 _r_b[3];
u8 conn_mask;
u8 _r_c[19];
- struct ssp_task_iu ssp_task; /* LUN and TAG */
+ struct ssp_tmf_iu ssp_task; /* LUN and TAG */
__le16 _r_d;
__le16 conn_handle;
__le64 _r_e;
@@ -562,7 +525,7 @@ struct initiate_ssp_tmf {
u8 proto_conn_rate;
__le32 _r_a;
struct ssp_frame_hdr ssp_frame;
- struct ssp_task_iu ssp_task;
+ struct ssp_tmf_iu ssp_task;
__le16 sister_scb;
__le16 conn_handle;
u8 flags; /* itnl override and suspend data tx */
diff --git a/drivers/scsi/arcmsr/arcmsr.h b/drivers/scsi/arcmsr/arcmsr.h
index 3bcaaac0ae4b..cf99f8cf4cdd 100644
--- a/drivers/scsi/arcmsr/arcmsr.h
+++ b/drivers/scsi/arcmsr/arcmsr.h
@@ -52,7 +52,7 @@ struct device_attribute;
#define ARCMSR_MAX_FREECCB_NUM 320
#define ARCMSR_MAX_OUTSTANDING_CMD 255
#endif
-#define ARCMSR_DRIVER_VERSION "v1.30.00.04-20140919"
+#define ARCMSR_DRIVER_VERSION "v1.30.00.22-20151126"
#define ARCMSR_SCSI_INITIATOR_ID 255
#define ARCMSR_MAX_XFER_SECTORS 512
#define ARCMSR_MAX_XFER_SECTORS_B 4096
@@ -74,6 +74,9 @@ struct device_attribute;
#ifndef PCI_DEVICE_ID_ARECA_1214
#define PCI_DEVICE_ID_ARECA_1214 0x1214
#endif
+#ifndef PCI_DEVICE_ID_ARECA_1203
+ #define PCI_DEVICE_ID_ARECA_1203 0x1203
+#endif
/*
**********************************************************************************
**
@@ -245,6 +248,12 @@ struct FIRMWARE_INFO
/* window of "instruction flags" from iop to driver */
#define ARCMSR_IOP2DRV_DOORBELL 0x00020408
#define ARCMSR_IOP2DRV_DOORBELL_MASK 0x0002040C
+/* window of "instruction flags" from iop to driver */
+#define ARCMSR_IOP2DRV_DOORBELL_1203 0x00021870
+#define ARCMSR_IOP2DRV_DOORBELL_MASK_1203 0x00021874
+/* window of "instruction flags" from driver to iop */
+#define ARCMSR_DRV2IOP_DOORBELL_1203 0x00021878
+#define ARCMSR_DRV2IOP_DOORBELL_MASK_1203 0x0002187C
/* ARECA FLAG LANGUAGE */
/* ioctl transfer */
#define ARCMSR_IOP2DRV_DATA_WRITE_OK 0x00000001
@@ -288,6 +297,9 @@ struct FIRMWARE_INFO
#define ARCMSR_MESSAGE_RBUFFER 0x0000ff00
/* iop message_rwbuffer for message command */
#define ARCMSR_MESSAGE_RWBUFFER 0x0000fa00
+
+#define MEM_BASE0(x) (u32 __iomem *)((unsigned long)acb->mem_base0 + x)
+#define MEM_BASE1(x) (u32 __iomem *)((unsigned long)acb->mem_base1 + x)
/*
************************************************************************
** SPEC. for Areca HBC adapter
diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
index 333db5953607..7640498964a5 100644
--- a/drivers/scsi/arcmsr/arcmsr_hba.c
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c
@@ -114,6 +114,7 @@ static void arcmsr_hardware_reset(struct AdapterControlBlock *acb);
static const char *arcmsr_info(struct Scsi_Host *);
static irqreturn_t arcmsr_interrupt(struct AdapterControlBlock *acb);
static void arcmsr_free_irq(struct pci_dev *, struct AdapterControlBlock *);
+static void arcmsr_wait_firmware_ready(struct AdapterControlBlock *acb);
static int arcmsr_adjust_disk_queue_depth(struct scsi_device *sdev, int queue_depth)
{
if (queue_depth > ARCMSR_MAX_CMD_PERLUN)
@@ -157,6 +158,8 @@ static struct pci_device_id arcmsr_device_id_table[] = {
.driver_data = ACB_ADAPTER_TYPE_B},
{PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1202),
.driver_data = ACB_ADAPTER_TYPE_B},
+ {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1203),
+ .driver_data = ACB_ADAPTER_TYPE_B},
{PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1210),
.driver_data = ACB_ADAPTER_TYPE_A},
{PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1214),
@@ -495,6 +498,91 @@ static void arcmsr_flush_adapter_cache(struct AdapterControlBlock *acb)
}
}
+static bool arcmsr_alloc_io_queue(struct AdapterControlBlock *acb)
+{
+ bool rtn = true;
+ void *dma_coherent;
+ dma_addr_t dma_coherent_handle;
+ struct pci_dev *pdev = acb->pdev;
+
+ switch (acb->adapter_type) {
+ case ACB_ADAPTER_TYPE_B: {
+ struct MessageUnit_B *reg;
+ acb->roundup_ccbsize = roundup(sizeof(struct MessageUnit_B), 32);
+ dma_coherent = dma_zalloc_coherent(&pdev->dev, acb->roundup_ccbsize,
+ &dma_coherent_handle, GFP_KERNEL);
+ if (!dma_coherent) {
+ pr_notice("arcmsr%d: DMA allocation failed\n", acb->host->host_no);
+ return false;
+ }
+ acb->dma_coherent_handle2 = dma_coherent_handle;
+ acb->dma_coherent2 = dma_coherent;
+ reg = (struct MessageUnit_B *)dma_coherent;
+ acb->pmuB = reg;
+ if (acb->pdev->device == PCI_DEVICE_ID_ARECA_1203) {
+ reg->drv2iop_doorbell = MEM_BASE0(ARCMSR_DRV2IOP_DOORBELL_1203);
+ reg->drv2iop_doorbell_mask = MEM_BASE0(ARCMSR_DRV2IOP_DOORBELL_MASK_1203);
+ reg->iop2drv_doorbell = MEM_BASE0(ARCMSR_IOP2DRV_DOORBELL_1203);
+ reg->iop2drv_doorbell_mask = MEM_BASE0(ARCMSR_IOP2DRV_DOORBELL_MASK_1203);
+ } else {
+ reg->drv2iop_doorbell = MEM_BASE0(ARCMSR_DRV2IOP_DOORBELL);
+ reg->drv2iop_doorbell_mask = MEM_BASE0(ARCMSR_DRV2IOP_DOORBELL_MASK);
+ reg->iop2drv_doorbell = MEM_BASE0(ARCMSR_IOP2DRV_DOORBELL);
+ reg->iop2drv_doorbell_mask = MEM_BASE0(ARCMSR_IOP2DRV_DOORBELL_MASK);
+ }
+ reg->message_wbuffer = MEM_BASE1(ARCMSR_MESSAGE_WBUFFER);
+ reg->message_rbuffer = MEM_BASE1(ARCMSR_MESSAGE_RBUFFER);
+ reg->message_rwbuffer = MEM_BASE1(ARCMSR_MESSAGE_RWBUFFER);
+ }
+ break;
+ case ACB_ADAPTER_TYPE_D: {
+ struct MessageUnit_D *reg;
+
+ acb->roundup_ccbsize = roundup(sizeof(struct MessageUnit_D), 32);
+ dma_coherent = dma_zalloc_coherent(&pdev->dev, acb->roundup_ccbsize,
+ &dma_coherent_handle, GFP_KERNEL);
+ if (!dma_coherent) {
+ pr_notice("arcmsr%d: DMA allocation failed\n", acb->host->host_no);
+ return false;
+ }
+ acb->dma_coherent_handle2 = dma_coherent_handle;
+ acb->dma_coherent2 = dma_coherent;
+ reg = (struct MessageUnit_D *)dma_coherent;
+ acb->pmuD = reg;
+ reg->chip_id = MEM_BASE0(ARCMSR_ARC1214_CHIP_ID);
+ reg->cpu_mem_config = MEM_BASE0(ARCMSR_ARC1214_CPU_MEMORY_CONFIGURATION);
+ reg->i2o_host_interrupt_mask = MEM_BASE0(ARCMSR_ARC1214_I2_HOST_INTERRUPT_MASK);
+ reg->sample_at_reset = MEM_BASE0(ARCMSR_ARC1214_SAMPLE_RESET);
+ reg->reset_request = MEM_BASE0(ARCMSR_ARC1214_RESET_REQUEST);
+ reg->host_int_status = MEM_BASE0(ARCMSR_ARC1214_MAIN_INTERRUPT_STATUS);
+ reg->pcief0_int_enable = MEM_BASE0(ARCMSR_ARC1214_PCIE_F0_INTERRUPT_ENABLE);
+ reg->inbound_msgaddr0 = MEM_BASE0(ARCMSR_ARC1214_INBOUND_MESSAGE0);
+ reg->inbound_msgaddr1 = MEM_BASE0(ARCMSR_ARC1214_INBOUND_MESSAGE1);
+ reg->outbound_msgaddr0 = MEM_BASE0(ARCMSR_ARC1214_OUTBOUND_MESSAGE0);
+ reg->outbound_msgaddr1 = MEM_BASE0(ARCMSR_ARC1214_OUTBOUND_MESSAGE1);
+ reg->inbound_doorbell = MEM_BASE0(ARCMSR_ARC1214_INBOUND_DOORBELL);
+ reg->outbound_doorbell = MEM_BASE0(ARCMSR_ARC1214_OUTBOUND_DOORBELL);
+ reg->outbound_doorbell_enable = MEM_BASE0(ARCMSR_ARC1214_OUTBOUND_DOORBELL_ENABLE);
+ reg->inboundlist_base_low = MEM_BASE0(ARCMSR_ARC1214_INBOUND_LIST_BASE_LOW);
+ reg->inboundlist_base_high = MEM_BASE0(ARCMSR_ARC1214_INBOUND_LIST_BASE_HIGH);
+ reg->inboundlist_write_pointer = MEM_BASE0(ARCMSR_ARC1214_INBOUND_LIST_WRITE_POINTER);
+ reg->outboundlist_base_low = MEM_BASE0(ARCMSR_ARC1214_OUTBOUND_LIST_BASE_LOW);
+ reg->outboundlist_base_high = MEM_BASE0(ARCMSR_ARC1214_OUTBOUND_LIST_BASE_HIGH);
+ reg->outboundlist_copy_pointer = MEM_BASE0(ARCMSR_ARC1214_OUTBOUND_LIST_COPY_POINTER);
+ reg->outboundlist_read_pointer = MEM_BASE0(ARCMSR_ARC1214_OUTBOUND_LIST_READ_POINTER);
+ reg->outboundlist_interrupt_cause = MEM_BASE0(ARCMSR_ARC1214_OUTBOUND_INTERRUPT_CAUSE);
+ reg->outboundlist_interrupt_enable = MEM_BASE0(ARCMSR_ARC1214_OUTBOUND_INTERRUPT_ENABLE);
+ reg->message_wbuffer = MEM_BASE0(ARCMSR_ARC1214_MESSAGE_WBUFFER);
+ reg->message_rbuffer = MEM_BASE0(ARCMSR_ARC1214_MESSAGE_RBUFFER);
+ reg->msgcode_rwbuffer = MEM_BASE0(ARCMSR_ARC1214_MESSAGE_RWBUFFER);
+ }
+ break;
+ default:
+ break;
+ }
+ return rtn;
+}
+
static int arcmsr_alloc_ccb_pool(struct AdapterControlBlock *acb)
{
struct pci_dev *pdev = acb->pdev;
@@ -739,9 +827,12 @@ static int arcmsr_probe(struct pci_dev *pdev, const struct pci_device_id *id)
if(!error){
goto pci_release_regs;
}
+ error = arcmsr_alloc_io_queue(acb);
+ if (!error)
+ goto unmap_pci_region;
error = arcmsr_get_firmware_spec(acb);
if(!error){
- goto unmap_pci_region;
+ goto free_hbb_mu;
}
error = arcmsr_alloc_ccb_pool(acb);
if(error){
@@ -2622,9 +2713,6 @@ static bool arcmsr_hbaA_get_config(struct AdapterControlBlock *acb)
static bool arcmsr_hbaB_get_config(struct AdapterControlBlock *acb)
{
struct MessageUnit_B *reg = acb->pmuB;
- struct pci_dev *pdev = acb->pdev;
- void *dma_coherent;
- dma_addr_t dma_coherent_handle;
char *acb_firm_model = acb->firm_model;
char *acb_firm_version = acb->firm_version;
char *acb_device_map = acb->device_map;
@@ -2636,30 +2724,16 @@ static bool arcmsr_hbaB_get_config(struct AdapterControlBlock *acb)
/*firm_version,21,84-99*/
int count;
- acb->roundup_ccbsize = roundup(sizeof(struct MessageUnit_B), 32);
- dma_coherent = dma_alloc_coherent(&pdev->dev, acb->roundup_ccbsize,
- &dma_coherent_handle, GFP_KERNEL);
- if (!dma_coherent){
- printk(KERN_NOTICE
- "arcmsr%d: dma_alloc_coherent got error for hbb mu\n",
- acb->host->host_no);
- return false;
- }
- acb->dma_coherent_handle2 = dma_coherent_handle;
- acb->dma_coherent2 = dma_coherent;
- reg = (struct MessageUnit_B *)dma_coherent;
- acb->pmuB = reg;
- reg->drv2iop_doorbell= (uint32_t __iomem *)((unsigned long)acb->mem_base0 + ARCMSR_DRV2IOP_DOORBELL);
- reg->drv2iop_doorbell_mask = (uint32_t __iomem *)((unsigned long)acb->mem_base0 + ARCMSR_DRV2IOP_DOORBELL_MASK);
- reg->iop2drv_doorbell = (uint32_t __iomem *)((unsigned long)acb->mem_base0 + ARCMSR_IOP2DRV_DOORBELL);
- reg->iop2drv_doorbell_mask = (uint32_t __iomem *)((unsigned long)acb->mem_base0 + ARCMSR_IOP2DRV_DOORBELL_MASK);
- reg->message_wbuffer = (uint32_t __iomem *)((unsigned long)acb->mem_base1 + ARCMSR_MESSAGE_WBUFFER);
- reg->message_rbuffer = (uint32_t __iomem *)((unsigned long)acb->mem_base1 + ARCMSR_MESSAGE_RBUFFER);
- reg->message_rwbuffer = (uint32_t __iomem *)((unsigned long)acb->mem_base1 + ARCMSR_MESSAGE_RWBUFFER);
iop_firm_model = (char __iomem *)(&reg->message_rwbuffer[15]); /*firm_model,15,60-67*/
iop_firm_version = (char __iomem *)(&reg->message_rwbuffer[17]); /*firm_version,17,68-83*/
iop_device_map = (char __iomem *)(&reg->message_rwbuffer[21]); /*firm_version,21,84-99*/
+ arcmsr_wait_firmware_ready(acb);
+ writel(ARCMSR_MESSAGE_START_DRIVER_MODE, reg->drv2iop_doorbell);
+ if (!arcmsr_hbaB_wait_msgint_ready(acb)) {
+ printk(KERN_ERR "arcmsr%d: can't set driver mode.\n", acb->host->host_no);
+ return false;
+ }
writel(ARCMSR_MESSAGE_GET_CONFIG, reg->drv2iop_doorbell);
if (!arcmsr_hbaB_wait_msgint_ready(acb)) {
printk(KERN_NOTICE "arcmsr%d: wait 'get adapter firmware \
@@ -2694,15 +2768,15 @@ static bool arcmsr_hbaB_get_config(struct AdapterControlBlock *acb)
acb->firm_model,
acb->firm_version);
- acb->signature = readl(&reg->message_rwbuffer[1]);
+ acb->signature = readl(&reg->message_rwbuffer[0]);
/*firm_signature,1,00-03*/
- acb->firm_request_len = readl(&reg->message_rwbuffer[2]);
+ acb->firm_request_len = readl(&reg->message_rwbuffer[1]);
/*firm_request_len,1,04-07*/
- acb->firm_numbers_queue = readl(&reg->message_rwbuffer[3]);
+ acb->firm_numbers_queue = readl(&reg->message_rwbuffer[2]);
/*firm_numbers_queue,2,08-11*/
- acb->firm_sdram_size = readl(&reg->message_rwbuffer[4]);
+ acb->firm_sdram_size = readl(&reg->message_rwbuffer[3]);
/*firm_sdram_size,3,12-15*/
- acb->firm_hd_channels = readl(&reg->message_rwbuffer[5]);
+ acb->firm_hd_channels = readl(&reg->message_rwbuffer[4]);
/*firm_ide_channels,4,16-19*/
acb->firm_cfg_version = readl(&reg->message_rwbuffer[25]); /*firm_cfg_version,25,100-103*/
/*firm_ide_channels,4,16-19*/
@@ -2777,70 +2851,8 @@ static bool arcmsr_hbaD_get_config(struct AdapterControlBlock *acb)
char __iomem *iop_firm_version;
char __iomem *iop_device_map;
u32 count;
- struct MessageUnit_D *reg;
- void *dma_coherent2;
- dma_addr_t dma_coherent_handle2;
- struct pci_dev *pdev = acb->pdev;
+ struct MessageUnit_D *reg = acb->pmuD;
- acb->roundup_ccbsize = roundup(sizeof(struct MessageUnit_D), 32);
- dma_coherent2 = dma_alloc_coherent(&pdev->dev, acb->roundup_ccbsize,
- &dma_coherent_handle2, GFP_KERNEL);
- if (!dma_coherent2) {
- pr_notice("DMA allocation failed...\n");
- return false;
- }
- memset(dma_coherent2, 0, acb->roundup_ccbsize);
- acb->dma_coherent_handle2 = dma_coherent_handle2;
- acb->dma_coherent2 = dma_coherent2;
- reg = (struct MessageUnit_D *)dma_coherent2;
- acb->pmuD = reg;
- reg->chip_id = acb->mem_base0 + ARCMSR_ARC1214_CHIP_ID;
- reg->cpu_mem_config = acb->mem_base0 +
- ARCMSR_ARC1214_CPU_MEMORY_CONFIGURATION;
- reg->i2o_host_interrupt_mask = acb->mem_base0 +
- ARCMSR_ARC1214_I2_HOST_INTERRUPT_MASK;
- reg->sample_at_reset = acb->mem_base0 + ARCMSR_ARC1214_SAMPLE_RESET;
- reg->reset_request = acb->mem_base0 + ARCMSR_ARC1214_RESET_REQUEST;
- reg->host_int_status = acb->mem_base0 +
- ARCMSR_ARC1214_MAIN_INTERRUPT_STATUS;
- reg->pcief0_int_enable = acb->mem_base0 +
- ARCMSR_ARC1214_PCIE_F0_INTERRUPT_ENABLE;
- reg->inbound_msgaddr0 = acb->mem_base0 +
- ARCMSR_ARC1214_INBOUND_MESSAGE0;
- reg->inbound_msgaddr1 = acb->mem_base0 +
- ARCMSR_ARC1214_INBOUND_MESSAGE1;
- reg->outbound_msgaddr0 = acb->mem_base0 +
- ARCMSR_ARC1214_OUTBOUND_MESSAGE0;
- reg->outbound_msgaddr1 = acb->mem_base0 +
- ARCMSR_ARC1214_OUTBOUND_MESSAGE1;
- reg->inbound_doorbell = acb->mem_base0 +
- ARCMSR_ARC1214_INBOUND_DOORBELL;
- reg->outbound_doorbell = acb->mem_base0 +
- ARCMSR_ARC1214_OUTBOUND_DOORBELL;
- reg->outbound_doorbell_enable = acb->mem_base0 +
- ARCMSR_ARC1214_OUTBOUND_DOORBELL_ENABLE;
- reg->inboundlist_base_low = acb->mem_base0 +
- ARCMSR_ARC1214_INBOUND_LIST_BASE_LOW;
- reg->inboundlist_base_high = acb->mem_base0 +
- ARCMSR_ARC1214_INBOUND_LIST_BASE_HIGH;
- reg->inboundlist_write_pointer = acb->mem_base0 +
- ARCMSR_ARC1214_INBOUND_LIST_WRITE_POINTER;
- reg->outboundlist_base_low = acb->mem_base0 +
- ARCMSR_ARC1214_OUTBOUND_LIST_BASE_LOW;
- reg->outboundlist_base_high = acb->mem_base0 +
- ARCMSR_ARC1214_OUTBOUND_LIST_BASE_HIGH;
- reg->outboundlist_copy_pointer = acb->mem_base0 +
- ARCMSR_ARC1214_OUTBOUND_LIST_COPY_POINTER;
- reg->outboundlist_read_pointer = acb->mem_base0 +
- ARCMSR_ARC1214_OUTBOUND_LIST_READ_POINTER;
- reg->outboundlist_interrupt_cause = acb->mem_base0 +
- ARCMSR_ARC1214_OUTBOUND_INTERRUPT_CAUSE;
- reg->outboundlist_interrupt_enable = acb->mem_base0 +
- ARCMSR_ARC1214_OUTBOUND_INTERRUPT_ENABLE;
- reg->message_wbuffer = acb->mem_base0 + ARCMSR_ARC1214_MESSAGE_WBUFFER;
- reg->message_rbuffer = acb->mem_base0 + ARCMSR_ARC1214_MESSAGE_RBUFFER;
- reg->msgcode_rwbuffer = acb->mem_base0 +
- ARCMSR_ARC1214_MESSAGE_RWBUFFER;
iop_firm_model = (char __iomem *)(&reg->msgcode_rwbuffer[15]);
iop_firm_version = (char __iomem *)(&reg->msgcode_rwbuffer[17]);
iop_device_map = (char __iomem *)(&reg->msgcode_rwbuffer[21]);
@@ -2855,8 +2867,6 @@ static bool arcmsr_hbaD_get_config(struct AdapterControlBlock *acb)
if (!arcmsr_hbaD_wait_msgint_ready(acb)) {
pr_notice("arcmsr%d: wait get adapter firmware "
"miscellaneous data timeout\n", acb->host->host_no);
- dma_free_coherent(&acb->pdev->dev, acb->roundup_ccbsize,
- acb->dma_coherent2, acb->dma_coherent_handle2);
return false;
}
count = 8;
@@ -2880,15 +2890,15 @@ static bool arcmsr_hbaD_get_config(struct AdapterControlBlock *acb)
iop_device_map++;
count--;
}
- acb->signature = readl(&reg->msgcode_rwbuffer[1]);
+ acb->signature = readl(&reg->msgcode_rwbuffer[0]);
/*firm_signature,1,00-03*/
- acb->firm_request_len = readl(&reg->msgcode_rwbuffer[2]);
+ acb->firm_request_len = readl(&reg->msgcode_rwbuffer[1]);
/*firm_request_len,1,04-07*/
- acb->firm_numbers_queue = readl(&reg->msgcode_rwbuffer[3]);
+ acb->firm_numbers_queue = readl(&reg->msgcode_rwbuffer[2]);
/*firm_numbers_queue,2,08-11*/
- acb->firm_sdram_size = readl(&reg->msgcode_rwbuffer[4]);
+ acb->firm_sdram_size = readl(&reg->msgcode_rwbuffer[3]);
/*firm_sdram_size,3,12-15*/
- acb->firm_hd_channels = readl(&reg->msgcode_rwbuffer[5]);
+ acb->firm_hd_channels = readl(&reg->msgcode_rwbuffer[4]);
/*firm_hd_channels,4,16-19*/
acb->firm_cfg_version = readl(&reg->msgcode_rwbuffer[25]);
pr_notice("Areca RAID Controller%d: Model %s, F/W %s\n",
@@ -3998,6 +4008,7 @@ static const char *arcmsr_info(struct Scsi_Host *host)
case PCI_DEVICE_ID_ARECA_1160:
case PCI_DEVICE_ID_ARECA_1170:
case PCI_DEVICE_ID_ARECA_1201:
+ case PCI_DEVICE_ID_ARECA_1203:
case PCI_DEVICE_ID_ARECA_1220:
case PCI_DEVICE_ID_ARECA_1230:
case PCI_DEVICE_ID_ARECA_1260:
diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c
index 05301bc752ee..8b52a9dbb9cf 100644
--- a/drivers/scsi/atp870u.c
+++ b/drivers/scsi/atp870u.c
@@ -41,77 +41,128 @@
static struct scsi_host_template atp870u_template;
static void send_s870(struct atp_unit *dev,unsigned char c);
-static void is885(struct atp_unit *dev, unsigned int wkport,unsigned char c);
-static void tscam_885(void);
+static void atp_is(struct atp_unit *dev, unsigned char c, bool wide_chip, unsigned char lvdmode);
+
+static inline void atp_writeb_base(struct atp_unit *atp, u8 reg, u8 val)
+{
+ outb(val, atp->baseport + reg);
+}
+
+static inline void atp_writew_base(struct atp_unit *atp, u8 reg, u16 val)
+{
+ outw(val, atp->baseport + reg);
+}
+
+static inline void atp_writeb_io(struct atp_unit *atp, u8 channel, u8 reg, u8 val)
+{
+ outb(val, atp->ioport[channel] + reg);
+}
+
+static inline void atp_writew_io(struct atp_unit *atp, u8 channel, u8 reg, u16 val)
+{
+ outw(val, atp->ioport[channel] + reg);
+}
+
+static inline void atp_writeb_pci(struct atp_unit *atp, u8 channel, u8 reg, u8 val)
+{
+ outb(val, atp->pciport[channel] + reg);
+}
+
+static inline void atp_writel_pci(struct atp_unit *atp, u8 channel, u8 reg, u32 val)
+{
+ outl(val, atp->pciport[channel] + reg);
+}
+
+static inline u8 atp_readb_base(struct atp_unit *atp, u8 reg)
+{
+ return inb(atp->baseport + reg);
+}
+
+static inline u16 atp_readw_base(struct atp_unit *atp, u8 reg)
+{
+ return inw(atp->baseport + reg);
+}
+
+static inline u32 atp_readl_base(struct atp_unit *atp, u8 reg)
+{
+ return inl(atp->baseport + reg);
+}
+
+static inline u8 atp_readb_io(struct atp_unit *atp, u8 channel, u8 reg)
+{
+ return inb(atp->ioport[channel] + reg);
+}
+
+static inline u16 atp_readw_io(struct atp_unit *atp, u8 channel, u8 reg)
+{
+ return inw(atp->ioport[channel] + reg);
+}
+
+static inline u8 atp_readb_pci(struct atp_unit *atp, u8 channel, u8 reg)
+{
+ return inb(atp->pciport[channel] + reg);
+}
+
+static inline bool is880(struct atp_unit *atp)
+{
+ return atp->pdev->device == ATP880_DEVID1 ||
+ atp->pdev->device == ATP880_DEVID2;
+}
+
+static inline bool is885(struct atp_unit *atp)
+{
+ return atp->pdev->device == ATP885_DEVID;
+}
static irqreturn_t atp870u_intr_handle(int irq, void *dev_id)
{
unsigned long flags;
- unsigned short int tmpcip, id;
+ unsigned short int id;
unsigned char i, j, c, target_id, lun,cmdp;
unsigned char *prd;
struct scsi_cmnd *workreq;
- unsigned int workport, tmport, tmport1;
unsigned long adrcnt, k;
#ifdef ED_DBGP
unsigned long l;
#endif
- int errstus;
struct Scsi_Host *host = dev_id;
struct atp_unit *dev = (struct atp_unit *)&host->hostdata;
for (c = 0; c < 2; c++) {
- tmport = dev->ioport[c] + 0x1f;
- j = inb(tmport);
+ j = atp_readb_io(dev, c, 0x1f);
if ((j & 0x80) != 0)
- {
- goto ch_sel;
- }
+ break;
dev->in_int[c] = 0;
}
- return IRQ_NONE;
-ch_sel:
+ if ((j & 0x80) == 0)
+ return IRQ_NONE;
#ifdef ED_DBGP
printk("atp870u_intr_handle enter\n");
#endif
dev->in_int[c] = 1;
- cmdp = inb(dev->ioport[c] + 0x10);
- workport = dev->ioport[c];
+ cmdp = atp_readb_io(dev, c, 0x10);
if (dev->working[c] != 0) {
- if (dev->dev_id == ATP885_DEVID) {
- tmport1 = workport + 0x16;
- if ((inb(tmport1) & 0x80) == 0)
- outb((inb(tmport1) | 0x80), tmport1);
+ if (is885(dev)) {
+ if ((atp_readb_io(dev, c, 0x16) & 0x80) == 0)
+ atp_writeb_io(dev, c, 0x16, (atp_readb_io(dev, c, 0x16) | 0x80));
}
- tmpcip = dev->pciport[c];
- if ((inb(tmpcip) & 0x08) != 0)
+ if ((atp_readb_pci(dev, c, 0x00) & 0x08) != 0)
{
- tmpcip += 0x2;
for (k=0; k < 1000; k++) {
- if ((inb(tmpcip) & 0x08) == 0) {
- goto stop_dma;
- }
- if ((inb(tmpcip) & 0x01) == 0) {
- goto stop_dma;
- }
+ if ((atp_readb_pci(dev, c, 2) & 0x08) == 0)
+ break;
+ if ((atp_readb_pci(dev, c, 2) & 0x01) == 0)
+ break;
}
}
-stop_dma:
- tmpcip = dev->pciport[c];
- outb(0x00, tmpcip);
- tmport -= 0x08;
+ atp_writeb_pci(dev, c, 0, 0x00);
- i = inb(tmport);
+ i = atp_readb_io(dev, c, 0x17);
- if (dev->dev_id == ATP885_DEVID) {
- tmpcip += 2;
- outb(0x06, tmpcip);
- tmpcip -= 2;
- }
+ if (is885(dev))
+ atp_writeb_pci(dev, c, 2, 0x06);
- tmport -= 0x02;
- target_id = inb(tmport);
- tmport += 0x02;
+ target_id = atp_readb_io(dev, c, 0x15);
/*
* Remap wide devices onto id numbers
@@ -129,7 +180,7 @@ stop_dma:
}
dev->last_cmd[c] |= 0x40;
}
- if (dev->dev_id == ATP885_DEVID)
+ if (is885(dev))
dev->r1f[c][target_id] |= j;
#ifdef ED_DBGP
printk("atp870u_intr_handle status = %x\n",i);
@@ -138,12 +189,11 @@ stop_dma:
if ((dev->last_cmd[c] & 0xf0) != 0x40) {
dev->last_cmd[c] = 0xff;
}
- if (dev->dev_id == ATP885_DEVID) {
- tmport -= 0x05;
+ if (is885(dev)) {
adrcnt = 0;
- ((unsigned char *) &adrcnt)[2] = inb(tmport++);
- ((unsigned char *) &adrcnt)[1] = inb(tmport++);
- ((unsigned char *) &adrcnt)[0] = inb(tmport);
+ ((unsigned char *) &adrcnt)[2] = atp_readb_io(dev, c, 0x12);
+ ((unsigned char *) &adrcnt)[1] = atp_readb_io(dev, c, 0x13);
+ ((unsigned char *) &adrcnt)[0] = atp_readb_io(dev, c, 0x14);
if (dev->id[c][target_id].last_len != adrcnt)
{
k = dev->id[c][target_id].last_len;
@@ -152,7 +202,7 @@ stop_dma:
dev->id[c][target_id].last_len = adrcnt;
}
#ifdef ED_DBGP
- printk("tmport = %x dev->id[c][target_id].last_len = %d dev->id[c][target_id].tran_len = %d\n",tmport,dev->id[c][target_id].last_len,dev->id[c][target_id].tran_len);
+ printk("dev->id[c][target_id].last_len = %d dev->id[c][target_id].tran_len = %d\n",dev->id[c][target_id].last_len,dev->id[c][target_id].tran_len);
#endif
}
@@ -160,11 +210,9 @@ stop_dma:
* Flip wide
*/
if (dev->wide_id[c] != 0) {
- tmport = workport + 0x1b;
- outb(0x01, tmport);
- while ((inb(tmport) & 0x01) != 0x01) {
- outb(0x01, tmport);
- }
+ atp_writeb_io(dev, c, 0x1b, 0x01);
+ while ((atp_readb_io(dev, c, 0x1b) & 0x01) != 0x01)
+ atp_writeb_io(dev, c, 0x1b, 0x01);
}
/*
* Issue more commands
@@ -185,37 +233,34 @@ stop_dma:
#ifdef ED_DBGP
printk("Status 0x85 return\n");
#endif
- goto handled;
+ return IRQ_HANDLED;
}
if (i == 0x40) {
dev->last_cmd[c] |= 0x40;
dev->in_int[c] = 0;
- goto handled;
+ return IRQ_HANDLED;
}
if (i == 0x21) {
if ((dev->last_cmd[c] & 0xf0) != 0x40) {
dev->last_cmd[c] = 0xff;
}
- tmport -= 0x05;
adrcnt = 0;
- ((unsigned char *) &adrcnt)[2] = inb(tmport++);
- ((unsigned char *) &adrcnt)[1] = inb(tmport++);
- ((unsigned char *) &adrcnt)[0] = inb(tmport);
+ ((unsigned char *) &adrcnt)[2] = atp_readb_io(dev, c, 0x12);
+ ((unsigned char *) &adrcnt)[1] = atp_readb_io(dev, c, 0x13);
+ ((unsigned char *) &adrcnt)[0] = atp_readb_io(dev, c, 0x14);
k = dev->id[c][target_id].last_len;
k -= adrcnt;
dev->id[c][target_id].tran_len = k;
dev->id[c][target_id].last_len = adrcnt;
- tmport -= 0x04;
- outb(0x41, tmport);
- tmport += 0x08;
- outb(0x08, tmport);
+ atp_writeb_io(dev, c, 0x10, 0x41);
+ atp_writeb_io(dev, c, 0x18, 0x08);
dev->in_int[c] = 0;
- goto handled;
+ return IRQ_HANDLED;
}
- if (dev->dev_id == ATP885_DEVID) {
+ if (is885(dev)) {
if ((i == 0x4c) || (i == 0x4d) || (i == 0x8c) || (i == 0x8d)) {
if ((i == 0x4c) || (i == 0x8c))
i=0x48;
@@ -229,11 +274,9 @@ stop_dma:
printk(KERN_DEBUG "Device reselect\n");
#endif
lun = 0;
- tmport -= 0x07;
- if (cmdp == 0x44 || i==0x80) {
- tmport += 0x0d;
- lun = inb(tmport) & 0x07;
- } else {
+ if (cmdp == 0x44 || i == 0x80)
+ lun = atp_readb_io(dev, c, 0x1d) & 0x07;
+ else {
if ((dev->last_cmd[c] & 0xf0) != 0x40) {
dev->last_cmd[c] = 0xff;
}
@@ -241,49 +284,41 @@ stop_dma:
#ifdef ED_DBGP
printk("cmdp = 0x41\n");
#endif
- tmport += 0x02;
adrcnt = 0;
- ((unsigned char *) &adrcnt)[2] = inb(tmport++);
- ((unsigned char *) &adrcnt)[1] = inb(tmport++);
- ((unsigned char *) &adrcnt)[0] = inb(tmport);
+ ((unsigned char *) &adrcnt)[2] = atp_readb_io(dev, c, 0x12);
+ ((unsigned char *) &adrcnt)[1] = atp_readb_io(dev, c, 0x13);
+ ((unsigned char *) &adrcnt)[0] = atp_readb_io(dev, c, 0x14);
k = dev->id[c][target_id].last_len;
k -= adrcnt;
dev->id[c][target_id].tran_len = k;
dev->id[c][target_id].last_len = adrcnt;
- tmport += 0x04;
- outb(0x08, tmport);
+ atp_writeb_io(dev, c, 0x18, 0x08);
dev->in_int[c] = 0;
- goto handled;
+ return IRQ_HANDLED;
} else {
#ifdef ED_DBGP
printk("cmdp != 0x41\n");
#endif
- outb(0x46, tmport);
+ atp_writeb_io(dev, c, 0x10, 0x46);
dev->id[c][target_id].dirct = 0x00;
- tmport += 0x02;
- outb(0x00, tmport++);
- outb(0x00, tmport++);
- outb(0x00, tmport++);
- tmport += 0x03;
- outb(0x08, tmport);
+ atp_writeb_io(dev, c, 0x12, 0x00);
+ atp_writeb_io(dev, c, 0x13, 0x00);
+ atp_writeb_io(dev, c, 0x14, 0x00);
+ atp_writeb_io(dev, c, 0x18, 0x08);
dev->in_int[c] = 0;
- goto handled;
+ return IRQ_HANDLED;
}
}
if (dev->last_cmd[c] != 0xff) {
dev->last_cmd[c] |= 0x40;
}
- if (dev->dev_id == ATP885_DEVID) {
- j = inb(dev->baseport + 0x29) & 0xfe;
- outb(j, dev->baseport + 0x29);
- tmport = workport + 0x16;
- } else {
- tmport = workport + 0x10;
- outb(0x45, tmport);
- tmport += 0x06;
- }
-
- target_id = inb(tmport);
+ if (is885(dev)) {
+ j = atp_readb_base(dev, 0x29) & 0xfe;
+ atp_writeb_base(dev, 0x29, j);
+ } else
+ atp_writeb_io(dev, c, 0x10, 0x45);
+
+ target_id = atp_readb_io(dev, c, 0x16);
/*
* Remap wide identifiers
*/
@@ -292,10 +327,8 @@ stop_dma:
} else {
target_id &= 0x07;
}
- if (dev->dev_id == ATP885_DEVID) {
- tmport = workport + 0x10;
- outb(0x45, tmport);
- }
+ if (is885(dev))
+ atp_writeb_io(dev, c, 0x10, 0x45);
workreq = dev->id[c][target_id].curr_req;
#ifdef ED_DBGP
scmd_printk(KERN_DEBUG, workreq, "CDB");
@@ -304,18 +337,16 @@ stop_dma:
printk("\n");
#endif
- tmport = workport + 0x0f;
- outb(lun, tmport);
- tmport += 0x02;
- outb(dev->id[c][target_id].devsp, tmport++);
+ atp_writeb_io(dev, c, 0x0f, lun);
+ atp_writeb_io(dev, c, 0x11, dev->id[c][target_id].devsp);
adrcnt = dev->id[c][target_id].tran_len;
k = dev->id[c][target_id].last_len;
- outb(((unsigned char *) &k)[2], tmport++);
- outb(((unsigned char *) &k)[1], tmport++);
- outb(((unsigned char *) &k)[0], tmport++);
+ atp_writeb_io(dev, c, 0x12, ((unsigned char *) &k)[2]);
+ atp_writeb_io(dev, c, 0x13, ((unsigned char *) &k)[1]);
+ atp_writeb_io(dev, c, 0x14, ((unsigned char *) &k)[0]);
#ifdef ED_DBGP
- printk("k %x, k[0] 0x%x k[1] 0x%x k[2] 0x%x\n", k, inb(tmport-1), inb(tmport-2), inb(tmport-3));
+ printk("k %x, k[0] 0x%x k[1] 0x%x k[2] 0x%x\n", k, atp_readb_io(dev, c, 0x14), atp_readb_io(dev, c, 0x13), atp_readb_io(dev, c, 0x12));
#endif
/* Remap wide */
j = target_id;
@@ -324,35 +355,28 @@ stop_dma:
}
/* Add direction */
j |= dev->id[c][target_id].dirct;
- outb(j, tmport++);
- outb(0x80,tmport);
+ atp_writeb_io(dev, c, 0x15, j);
+ atp_writeb_io(dev, c, 0x16, 0x80);
/* enable 32 bit fifo transfer */
- if (dev->dev_id == ATP885_DEVID) {
- tmpcip = dev->pciport[c] + 1;
- i=inb(tmpcip) & 0xf3;
+ if (is885(dev)) {
+ i = atp_readb_pci(dev, c, 1) & 0xf3;
//j=workreq->cmnd[0];
if ((workreq->cmnd[0] == 0x08) || (workreq->cmnd[0] == 0x28) || (workreq->cmnd[0] == 0x0a) || (workreq->cmnd[0] == 0x2a)) {
i |= 0x0c;
}
- outb(i,tmpcip);
- } else if ((dev->dev_id == ATP880_DEVID1) ||
- (dev->dev_id == ATP880_DEVID2) ) {
- tmport = workport - 0x05;
- if ((workreq->cmnd[0] == 0x08) || (workreq->cmnd[0] == 0x28) || (workreq->cmnd[0] == 0x0a) || (workreq->cmnd[0] == 0x2a)) {
- outb((unsigned char) ((inb(tmport) & 0x3f) | 0xc0), tmport);
- } else {
- outb((unsigned char) (inb(tmport) & 0x3f), tmport);
- }
+ atp_writeb_pci(dev, c, 1, i);
+ } else if (is880(dev)) {
+ if ((workreq->cmnd[0] == 0x08) || (workreq->cmnd[0] == 0x28) || (workreq->cmnd[0] == 0x0a) || (workreq->cmnd[0] == 0x2a))
+ atp_writeb_base(dev, 0x3b, (atp_readb_base(dev, 0x3b) & 0x3f) | 0xc0);
+ else
+ atp_writeb_base(dev, 0x3b, atp_readb_base(dev, 0x3b) & 0x3f);
} else {
- tmport = workport + 0x3a;
- if ((workreq->cmnd[0] == 0x08) || (workreq->cmnd[0] == 0x28) || (workreq->cmnd[0] == 0x0a) || (workreq->cmnd[0] == 0x2a)) {
- outb((unsigned char) ((inb(tmport) & 0xf3) | 0x08), tmport);
- } else {
- outb((unsigned char) (inb(tmport) & 0xf3), tmport);
- }
+ if ((workreq->cmnd[0] == 0x08) || (workreq->cmnd[0] == 0x28) || (workreq->cmnd[0] == 0x0a) || (workreq->cmnd[0] == 0x2a))
+ atp_writeb_base(dev, 0x3a, (atp_readb_base(dev, 0x3a) & 0xf3) | 0x08);
+ else
+ atp_writeb_base(dev, 0x3a, atp_readb_base(dev, 0x3a) & 0xf3);
}
- tmport = workport + 0x1b;
j = 0;
id = 1;
id = id << target_id;
@@ -362,18 +386,16 @@ stop_dma:
if ((id & dev->wide_id[c]) != 0) {
j |= 0x01;
}
- outb(j, tmport);
- while ((inb(tmport) & 0x01) != j) {
- outb(j,tmport);
- }
+ atp_writeb_io(dev, c, 0x1b, j);
+ while ((atp_readb_io(dev, c, 0x1b) & 0x01) != j)
+ atp_writeb_io(dev, c, 0x1b, j);
if (dev->id[c][target_id].last_len == 0) {
- tmport = workport + 0x18;
- outb(0x08, tmport);
+ atp_writeb_io(dev, c, 0x18, 0x08);
dev->in_int[c] = 0;
#ifdef ED_DBGP
printk("dev->id[c][target_id].last_len = 0\n");
#endif
- goto handled;
+ return IRQ_HANDLED;
}
#ifdef ED_DBGP
printk("target_id = %d adrcnt = %d\n",target_id,adrcnt);
@@ -401,39 +423,33 @@ stop_dma:
}
}
}
- tmpcip = dev->pciport[c] + 0x04;
- outl(dev->id[c][target_id].prdaddr, tmpcip);
+ atp_writel_pci(dev, c, 0x04, dev->id[c][target_id].prdaddr);
#ifdef ED_DBGP
printk("dev->id[%d][%d].prdaddr 0x%8x\n", c, target_id, dev->id[c][target_id].prdaddr);
#endif
- if (dev->dev_id == ATP885_DEVID) {
- tmpcip -= 0x04;
- } else {
- tmpcip -= 0x02;
- outb(0x06, tmpcip);
- outb(0x00, tmpcip);
- tmpcip -= 0x02;
+ if (!is885(dev)) {
+ atp_writeb_pci(dev, c, 2, 0x06);
+ atp_writeb_pci(dev, c, 2, 0x00);
}
- tmport = workport + 0x18;
/*
* Check transfer direction
*/
if (dev->id[c][target_id].dirct != 0) {
- outb(0x08, tmport);
- outb(0x01, tmpcip);
+ atp_writeb_io(dev, c, 0x18, 0x08);
+ atp_writeb_pci(dev, c, 0, 0x01);
dev->in_int[c] = 0;
#ifdef ED_DBGP
printk("status 0x80 return dirct != 0\n");
#endif
- goto handled;
+ return IRQ_HANDLED;
}
- outb(0x08, tmport);
- outb(0x09, tmpcip);
+ atp_writeb_io(dev, c, 0x18, 0x08);
+ atp_writeb_pci(dev, c, 0, 0x09);
dev->in_int[c] = 0;
#ifdef ED_DBGP
printk("status 0x80 return dirct = 0\n");
#endif
- goto handled;
+ return IRQ_HANDLED;
}
/*
@@ -442,31 +458,22 @@ stop_dma:
workreq = dev->id[c][target_id].curr_req;
- if (i == 0x42) {
- if ((dev->last_cmd[c] & 0xf0) != 0x40)
- {
- dev->last_cmd[c] = 0xff;
- }
- errstus = 0x02;
- workreq->result = errstus;
- goto go_42;
- }
- if (i == 0x16) {
+ if (i == 0x42 || i == 0x16) {
if ((dev->last_cmd[c] & 0xf0) != 0x40) {
dev->last_cmd[c] = 0xff;
}
- errstus = 0;
- tmport -= 0x08;
- errstus = inb(tmport);
- if (((dev->r1f[c][target_id] & 0x10) != 0)&&(dev->dev_id==ATP885_DEVID)) {
- printk(KERN_WARNING "AEC67162 CRC ERROR !\n");
- errstus = 0x02;
- }
- workreq->result = errstus;
-go_42:
- if (dev->dev_id == ATP885_DEVID) {
- j = inb(dev->baseport + 0x29) | 0x01;
- outb(j, dev->baseport + 0x29);
+ if (i == 0x16) {
+ workreq->result = atp_readb_io(dev, c, 0x0f);
+ if (((dev->r1f[c][target_id] & 0x10) != 0) && is885(dev)) {
+ printk(KERN_WARNING "AEC67162 CRC ERROR !\n");
+ workreq->result = 0x02;
+ }
+ } else
+ workreq->result = 0x02;
+
+ if (is885(dev)) {
+ j = atp_readb_base(dev, 0x29) | 0x01;
+ atp_writeb_base(dev, 0x29, j);
}
/*
* Complete the command
@@ -488,11 +495,9 @@ go_42:
* Take it back wide
*/
if (dev->wide_id[c] != 0) {
- tmport = workport + 0x1b;
- outb(0x01, tmport);
- while ((inb(tmport) & 0x01) != 0x01) {
- outb(0x01, tmport);
- }
+ atp_writeb_io(dev, c, 0x1b, 0x01);
+ while ((atp_readb_io(dev, c, 0x1b) & 0x01) != 0x01)
+ atp_writeb_io(dev, c, 0x1b, 0x01);
}
/*
* If there is stuff to send and nothing going then send it
@@ -507,7 +512,7 @@ go_42:
}
spin_unlock_irqrestore(dev->host->host_lock, flags);
dev->in_int[c] = 0;
- goto handled;
+ return IRQ_HANDLED;
}
if ((dev->last_cmd[c] & 0xf0) != 0x40) {
dev->last_cmd[c] = 0xff;
@@ -517,84 +522,54 @@ go_42:
}
i &= 0x0f;
if (i == 0x09) {
- tmpcip += 4;
- outl(dev->id[c][target_id].prdaddr, tmpcip);
- tmpcip = tmpcip - 2;
- outb(0x06, tmpcip);
- outb(0x00, tmpcip);
- tmpcip = tmpcip - 2;
- tmport = workport + 0x10;
- outb(0x41, tmport);
- if (dev->dev_id == ATP885_DEVID) {
- tmport += 2;
+ atp_writel_pci(dev, c, 4, dev->id[c][target_id].prdaddr);
+ atp_writeb_pci(dev, c, 2, 0x06);
+ atp_writeb_pci(dev, c, 2, 0x00);
+ atp_writeb_io(dev, c, 0x10, 0x41);
+ if (is885(dev)) {
k = dev->id[c][target_id].last_len;
- outb((unsigned char) (((unsigned char *) (&k))[2]), tmport++);
- outb((unsigned char) (((unsigned char *) (&k))[1]), tmport++);
- outb((unsigned char) (((unsigned char *) (&k))[0]), tmport);
+ atp_writeb_io(dev, c, 0x12, ((unsigned char *) (&k))[2]);
+ atp_writeb_io(dev, c, 0x13, ((unsigned char *) (&k))[1]);
+ atp_writeb_io(dev, c, 0x14, ((unsigned char *) (&k))[0]);
dev->id[c][target_id].dirct = 0x00;
- tmport += 0x04;
} else {
dev->id[c][target_id].dirct = 0x00;
- tmport += 0x08;
}
- outb(0x08, tmport);
- outb(0x09, tmpcip);
+ atp_writeb_io(dev, c, 0x18, 0x08);
+ atp_writeb_pci(dev, c, 0, 0x09);
dev->in_int[c] = 0;
- goto handled;
+ return IRQ_HANDLED;
}
if (i == 0x08) {
- tmpcip += 4;
- outl(dev->id[c][target_id].prdaddr, tmpcip);
- tmpcip = tmpcip - 2;
- outb(0x06, tmpcip);
- outb(0x00, tmpcip);
- tmpcip = tmpcip - 2;
- tmport = workport + 0x10;
- outb(0x41, tmport);
- if (dev->dev_id == ATP885_DEVID) {
- tmport += 2;
+ atp_writel_pci(dev, c, 4, dev->id[c][target_id].prdaddr);
+ atp_writeb_pci(dev, c, 2, 0x06);
+ atp_writeb_pci(dev, c, 2, 0x00);
+ atp_writeb_io(dev, c, 0x10, 0x41);
+ if (is885(dev)) {
k = dev->id[c][target_id].last_len;
- outb((unsigned char) (((unsigned char *) (&k))[2]), tmport++);
- outb((unsigned char) (((unsigned char *) (&k))[1]), tmport++);
- outb((unsigned char) (((unsigned char *) (&k))[0]), tmport++);
- } else {
- tmport += 5;
+ atp_writeb_io(dev, c, 0x12, ((unsigned char *) (&k))[2]);
+ atp_writeb_io(dev, c, 0x13, ((unsigned char *) (&k))[1]);
+ atp_writeb_io(dev, c, 0x14, ((unsigned char *) (&k))[0]);
}
- outb((unsigned char) (inb(tmport) | 0x20), tmport);
+ atp_writeb_io(dev, c, 0x15, atp_readb_io(dev, c, 0x15) | 0x20);
dev->id[c][target_id].dirct = 0x20;
- tmport += 0x03;
- outb(0x08, tmport);
- outb(0x01, tmpcip);
+ atp_writeb_io(dev, c, 0x18, 0x08);
+ atp_writeb_pci(dev, c, 0, 0x01);
dev->in_int[c] = 0;
- goto handled;
- }
- tmport -= 0x07;
- if (i == 0x0a) {
- outb(0x30, tmport);
- } else {
- outb(0x46, tmport);
+ return IRQ_HANDLED;
}
+ if (i == 0x0a)
+ atp_writeb_io(dev, c, 0x10, 0x30);
+ else
+ atp_writeb_io(dev, c, 0x10, 0x46);
dev->id[c][target_id].dirct = 0x00;
- tmport += 0x02;
- outb(0x00, tmport++);
- outb(0x00, tmport++);
- outb(0x00, tmport++);
- tmport += 0x03;
- outb(0x08, tmport);
- dev->in_int[c] = 0;
- goto handled;
- } else {
-// tmport = workport + 0x17;
-// inb(tmport);
-// dev->working[c] = 0;
- dev->in_int[c] = 0;
- goto handled;
+ atp_writeb_io(dev, c, 0x12, 0x00);
+ atp_writeb_io(dev, c, 0x13, 0x00);
+ atp_writeb_io(dev, c, 0x14, 0x00);
+ atp_writeb_io(dev, c, 0x18, 0x08);
}
-
-handled:
-#ifdef ED_DBGP
- printk("atp870u_intr_handle exit\n");
-#endif
+ dev->in_int[c] = 0;
+
return IRQ_HANDLED;
}
/**
@@ -608,7 +583,7 @@ static int atp870u_queuecommand_lck(struct scsi_cmnd *req_p,
void (*done) (struct scsi_cmnd *))
{
unsigned char c;
- unsigned int tmport,m;
+ unsigned int m;
struct atp_unit *dev;
struct Scsi_Host *host;
@@ -677,11 +652,10 @@ static int atp870u_queuecommand_lck(struct scsi_cmnd *req_p,
return 0;
}
dev->quereq[c][dev->quend[c]] = req_p;
- tmport = dev->ioport[c] + 0x1c;
#ifdef ED_DBGP
- printk("dev->ioport[c] = %x inb(tmport) = %x dev->in_int[%d] = %d dev->in_snd[%d] = %d\n",dev->ioport[c],inb(tmport),c,dev->in_int[c],c,dev->in_snd[c]);
+ printk("dev->ioport[c] = %x atp_readb_io(dev, c, 0x1c) = %x dev->in_int[%d] = %d dev->in_snd[%d] = %d\n",dev->ioport[c],atp_readb_io(dev, c, 0x1c),c,dev->in_int[c],c,dev->in_snd[c]);
#endif
- if ((inb(tmport) == 0) && (dev->in_int[c] == 0) && (dev->in_snd[c] == 0)) {
+ if ((atp_readb_io(dev, c, 0x1c) == 0) && (dev->in_int[c] == 0) && (dev->in_snd[c] == 0)) {
#ifdef ED_DBGP
printk("Call sent_s870(atp870u_queuecommand)\n");
#endif
@@ -706,14 +680,12 @@ static DEF_SCSI_QCMD(atp870u_queuecommand)
*/
static void send_s870(struct atp_unit *dev,unsigned char c)
{
- unsigned int tmport;
- struct scsi_cmnd *workreq;
+ struct scsi_cmnd *workreq = NULL;
unsigned int i;//,k;
unsigned char j, target_id;
unsigned char *prd;
- unsigned short int tmpcip, w;
+ unsigned short int w;
unsigned long l, bttl = 0;
- unsigned int workport;
unsigned long sg_count;
if (dev->in_snd[c] != 0) {
@@ -729,53 +701,42 @@ static void send_s870(struct atp_unit *dev,unsigned char c)
if ((dev->last_cmd[c] != 0xff) && ((dev->last_cmd[c] & 0x40) != 0)) {
dev->last_cmd[c] &= 0x0f;
workreq = dev->id[c][dev->last_cmd[c]].curr_req;
- if (workreq != NULL) { /* check NULL pointer */
- goto cmd_subp;
- }
- dev->last_cmd[c] = 0xff;
- if (dev->quhd[c] == dev->quend[c]) {
- dev->in_snd[c] = 0;
- return ;
+ if (!workreq) {
+ dev->last_cmd[c] = 0xff;
+ if (dev->quhd[c] == dev->quend[c]) {
+ dev->in_snd[c] = 0;
+ return;
+ }
}
}
- if ((dev->last_cmd[c] != 0xff) && (dev->working[c] != 0)) {
- dev->in_snd[c] = 0;
- return ;
- }
- dev->working[c]++;
- j = dev->quhd[c];
- dev->quhd[c]++;
- if (dev->quhd[c] >= qcnt) {
- dev->quhd[c] = 0;
- }
- workreq = dev->quereq[c][dev->quhd[c]];
- if (dev->id[c][scmd_id(workreq)].curr_req == NULL) {
+ if (!workreq) {
+ if ((dev->last_cmd[c] != 0xff) && (dev->working[c] != 0)) {
+ dev->in_snd[c] = 0;
+ return;
+ }
+ dev->working[c]++;
+ j = dev->quhd[c];
+ dev->quhd[c]++;
+ if (dev->quhd[c] >= qcnt)
+ dev->quhd[c] = 0;
+ workreq = dev->quereq[c][dev->quhd[c]];
+ if (dev->id[c][scmd_id(workreq)].curr_req != NULL) {
+ dev->quhd[c] = j;
+ dev->working[c]--;
+ dev->in_snd[c] = 0;
+ return;
+ }
dev->id[c][scmd_id(workreq)].curr_req = workreq;
dev->last_cmd[c] = scmd_id(workreq);
- goto cmd_subp;
- }
- dev->quhd[c] = j;
- dev->working[c]--;
- dev->in_snd[c] = 0;
- return;
-cmd_subp:
- workport = dev->ioport[c];
- tmport = workport + 0x1f;
- if ((inb(tmport) & 0xb0) != 0) {
- goto abortsnd;
- }
- tmport = workport + 0x1c;
- if (inb(tmport) == 0) {
- goto oktosend;
}
-abortsnd:
+ if ((atp_readb_io(dev, c, 0x1f) & 0xb0) != 0 || atp_readb_io(dev, c, 0x1c) != 0) {
#ifdef ED_DBGP
- printk("Abort to Send\n");
+ printk("Abort to Send\n");
#endif
- dev->last_cmd[c] |= 0x40;
- dev->in_snd[c] = 0;
- return;
-oktosend:
+ dev->last_cmd[c] |= 0x40;
+ dev->in_snd[c] = 0;
+ return;
+ }
#ifdef ED_DBGP
printk("OK to Send\n");
scmd_printk(KERN_DEBUG, workreq, "CDB");
@@ -786,9 +747,9 @@ oktosend:
#endif
l = scsi_bufflen(workreq);
- if (dev->dev_id == ATP885_DEVID) {
- j = inb(dev->baseport + 0x29) & 0xfe;
- outb(j, dev->baseport + 0x29);
+ if (is885(dev)) {
+ j = atp_readb_base(dev, 0x29) & 0xfe;
+ atp_writeb_base(dev, 0x29, j);
dev->r1f[c][scmd_id(workreq)] = 0;
}
@@ -800,7 +761,6 @@ oktosend:
l = 0;
}
- tmport = workport + 0x1b;
j = 0;
target_id = scmd_id(workreq);
@@ -812,9 +772,9 @@ oktosend:
if ((w & dev->wide_id[c]) != 0) {
j |= 0x01;
}
- outb(j, tmport);
- while ((inb(tmport) & 0x01) != j) {
- outb(j,tmport);
+ atp_writeb_io(dev, c, 0x1b, j);
+ while ((atp_readb_io(dev, c, 0x1b) & 0x01) != j) {
+ atp_writeb_pci(dev, c, 0x1b, j);
#ifdef ED_DBGP
printk("send_s870 while loop 1\n");
#endif
@@ -823,24 +783,19 @@ oktosend:
* Write the command
*/
- tmport = workport;
- outb(workreq->cmd_len, tmport++);
- outb(0x2c, tmport++);
- if (dev->dev_id == ATP885_DEVID) {
- outb(0x7f, tmport++);
- } else {
- outb(0xcf, tmport++);
- }
- for (i = 0; i < workreq->cmd_len; i++) {
- outb(workreq->cmnd[i], tmport++);
- }
- tmport = workport + 0x0f;
- outb(workreq->device->lun, tmport);
- tmport += 0x02;
+ atp_writeb_io(dev, c, 0x00, workreq->cmd_len);
+ atp_writeb_io(dev, c, 0x01, 0x2c);
+ if (is885(dev))
+ atp_writeb_io(dev, c, 0x02, 0x7f);
+ else
+ atp_writeb_io(dev, c, 0x02, 0xcf);
+ for (i = 0; i < workreq->cmd_len; i++)
+ atp_writeb_io(dev, c, 0x03 + i, workreq->cmnd[i]);
+ atp_writeb_io(dev, c, 0x0f, workreq->device->lun);
/*
* Write the target
*/
- outb(dev->id[c][target_id].devsp, tmport++);
+ atp_writeb_io(dev, c, 0x11, dev->id[c][target_id].devsp);
#ifdef ED_DBGP
printk("dev->id[%d][%d].devsp = %2x\n",c,target_id,dev->id[c][target_id].devsp);
#endif
@@ -849,9 +804,9 @@ oktosend:
/*
* Write transfer size
*/
- outb((unsigned char) (((unsigned char *) (&l))[2]), tmport++);
- outb((unsigned char) (((unsigned char *) (&l))[1]), tmport++);
- outb((unsigned char) (((unsigned char *) (&l))[0]), tmport++);
+ atp_writeb_io(dev, c, 0x12, ((unsigned char *) (&l))[2]);
+ atp_writeb_io(dev, c, 0x13, ((unsigned char *) (&l))[1]);
+ atp_writeb_io(dev, c, 0x14, ((unsigned char *) (&l))[0]);
j = target_id;
dev->id[c][j].last_len = l;
dev->id[c][j].tran_len = 0;
@@ -867,29 +822,24 @@ oktosend:
/*
* Check transfer direction
*/
- if (workreq->sc_data_direction == DMA_TO_DEVICE) {
- outb((unsigned char) (j | 0x20), tmport++);
- } else {
- outb(j, tmport++);
- }
- outb((unsigned char) (inb(tmport) | 0x80), tmport);
- outb(0x80, tmport);
- tmport = workport + 0x1c;
+ if (workreq->sc_data_direction == DMA_TO_DEVICE)
+ atp_writeb_io(dev, c, 0x15, j | 0x20);
+ else
+ atp_writeb_io(dev, c, 0x15, j);
+ atp_writeb_io(dev, c, 0x16, atp_readb_io(dev, c, 0x16) | 0x80);
+ atp_writeb_io(dev, c, 0x16, 0x80);
dev->id[c][target_id].dirct = 0;
if (l == 0) {
- if (inb(tmport) == 0) {
- tmport = workport + 0x18;
+ if (atp_readb_io(dev, c, 0x1c) == 0) {
#ifdef ED_DBGP
printk("change SCSI_CMD_REG 0x08\n");
#endif
- outb(0x08, tmport);
- } else {
+ atp_writeb_io(dev, c, 0x18, 0x08);
+ } else
dev->last_cmd[c] |= 0x40;
- }
dev->in_snd[c] = 0;
return;
}
- tmpcip = dev->pciport[c];
prd = dev->id[c][target_id].prd_table;
dev->id[c][target_id].prd_pos = prd;
@@ -926,50 +876,37 @@ oktosend:
printk("2. bttl %x, l %x\n",bttl, l);
#endif
}
- tmpcip += 4;
#ifdef ED_DBGP
- printk("send_s870: prdaddr_2 0x%8x tmpcip %x target_id %d\n", dev->id[c][target_id].prdaddr,tmpcip,target_id);
+ printk("send_s870: prdaddr_2 0x%8x target_id %d\n", dev->id[c][target_id].prdaddr,target_id);
#endif
dev->id[c][target_id].prdaddr = dev->id[c][target_id].prd_bus;
- outl(dev->id[c][target_id].prdaddr, tmpcip);
- tmpcip = tmpcip - 2;
- outb(0x06, tmpcip);
- outb(0x00, tmpcip);
- if (dev->dev_id == ATP885_DEVID) {
- tmpcip--;
- j=inb(tmpcip) & 0xf3;
+ atp_writel_pci(dev, c, 4, dev->id[c][target_id].prdaddr);
+ atp_writeb_pci(dev, c, 2, 0x06);
+ atp_writeb_pci(dev, c, 2, 0x00);
+ if (is885(dev)) {
+ j = atp_readb_pci(dev, c, 1) & 0xf3;
if ((workreq->cmnd[0] == 0x08) || (workreq->cmnd[0] == 0x28) ||
(workreq->cmnd[0] == 0x0a) || (workreq->cmnd[0] == 0x2a)) {
j |= 0x0c;
}
- outb(j,tmpcip);
- tmpcip--;
- } else if ((dev->dev_id == ATP880_DEVID1) ||
- (dev->dev_id == ATP880_DEVID2)) {
- tmpcip =tmpcip -2;
- tmport = workport - 0x05;
- if ((workreq->cmnd[0] == 0x08) || (workreq->cmnd[0] == 0x28) || (workreq->cmnd[0] == 0x0a) || (workreq->cmnd[0] == 0x2a)) {
- outb((unsigned char) ((inb(tmport) & 0x3f) | 0xc0), tmport);
- } else {
- outb((unsigned char) (inb(tmport) & 0x3f), tmport);
- }
+ atp_writeb_pci(dev, c, 1, j);
+ } else if (is880(dev)) {
+ if ((workreq->cmnd[0] == 0x08) || (workreq->cmnd[0] == 0x28) || (workreq->cmnd[0] == 0x0a) || (workreq->cmnd[0] == 0x2a))
+ atp_writeb_base(dev, 0x3b, (atp_readb_base(dev, 0x3b) & 0x3f) | 0xc0);
+ else
+ atp_writeb_base(dev, 0x3b, atp_readb_base(dev, 0x3b) & 0x3f);
} else {
- tmpcip =tmpcip -2;
- tmport = workport + 0x3a;
- if ((workreq->cmnd[0] == 0x08) || (workreq->cmnd[0] == 0x28) || (workreq->cmnd[0] == 0x0a) || (workreq->cmnd[0] == 0x2a)) {
- outb((inb(tmport) & 0xf3) | 0x08, tmport);
- } else {
- outb(inb(tmport) & 0xf3, tmport);
- }
+ if ((workreq->cmnd[0] == 0x08) || (workreq->cmnd[0] == 0x28) || (workreq->cmnd[0] == 0x0a) || (workreq->cmnd[0] == 0x2a))
+ atp_writeb_base(dev, 0x3a, (atp_readb_base(dev, 0x3a) & 0xf3) | 0x08);
+ else
+ atp_writeb_base(dev, 0x3a, atp_readb_base(dev, 0x3a) & 0xf3);
}
- tmport = workport + 0x1c;
if(workreq->sc_data_direction == DMA_TO_DEVICE) {
dev->id[c][target_id].dirct = 0x20;
- if (inb(tmport) == 0) {
- tmport = workport + 0x18;
- outb(0x08, tmport);
- outb(0x01, tmpcip);
+ if (atp_readb_io(dev, c, 0x1c) == 0) {
+ atp_writeb_io(dev, c, 0x18, 0x08);
+ atp_writeb_pci(dev, c, 0, 0x01);
#ifdef ED_DBGP
printk( "start DMA(to target)\n");
#endif
@@ -979,10 +916,9 @@ oktosend:
dev->in_snd[c] = 0;
return;
}
- if (inb(tmport) == 0) {
- tmport = workport + 0x18;
- outb(0x08, tmport);
- outb(0x09, tmpcip);
+ if (atp_readb_io(dev, c, 0x1c) == 0) {
+ atp_writeb_io(dev, c, 0x18, 0x08);
+ atp_writeb_pci(dev, c, 0, 0x09);
#ifdef ED_DBGP
printk( "start DMA(to host)\n");
#endif
@@ -996,49 +932,40 @@ oktosend:
static unsigned char fun_scam(struct atp_unit *dev, unsigned short int *val)
{
- unsigned int tmport;
unsigned short int i, k;
unsigned char j;
- tmport = dev->ioport[0] + 0x1c;
- outw(*val, tmport);
-FUN_D7:
+ atp_writew_io(dev, 0, 0x1c, *val);
for (i = 0; i < 10; i++) { /* stable >= bus settle delay(400 ns) */
- k = inw(tmport);
+ k = atp_readw_io(dev, 0, 0x1c);
j = (unsigned char) (k >> 8);
- if ((k & 0x8000) != 0) { /* DB7 all release? */
- goto FUN_D7;
- }
+ if ((k & 0x8000) != 0) /* DB7 all release? */
+ i = 0;
}
*val |= 0x4000; /* assert DB6 */
- outw(*val, tmport);
+ atp_writew_io(dev, 0, 0x1c, *val);
*val &= 0xdfff; /* assert DB5 */
- outw(*val, tmport);
-FUN_D5:
+ atp_writew_io(dev, 0, 0x1c, *val);
for (i = 0; i < 10; i++) { /* stable >= bus settle delay(400 ns) */
- if ((inw(tmport) & 0x2000) != 0) { /* DB5 all release? */
- goto FUN_D5;
- }
+ if ((atp_readw_io(dev, 0, 0x1c) & 0x2000) != 0) /* DB5 all release? */
+ i = 0;
}
*val |= 0x8000; /* no DB4-0, assert DB7 */
*val &= 0xe0ff;
- outw(*val, tmport);
+ atp_writew_io(dev, 0, 0x1c, *val);
*val &= 0xbfff; /* release DB6 */
- outw(*val, tmport);
-FUN_D6:
+ atp_writew_io(dev, 0, 0x1c, *val);
for (i = 0; i < 10; i++) { /* stable >= bus settle delay(400 ns) */
- if ((inw(tmport) & 0x4000) != 0) { /* DB6 all release? */
- goto FUN_D6;
- }
+ if ((atp_readw_io(dev, 0, 0x1c) & 0x4000) != 0) /* DB6 all release? */
+ i = 0;
}
return j;
}
-static void tscam(struct Scsi_Host *host)
+static void tscam(struct Scsi_Host *host, bool wide_chip, u8 scam_on)
{
- unsigned int tmport;
unsigned char i, j, k;
unsigned long n;
unsigned short int m, assignid_map, val;
@@ -1055,31 +982,28 @@ static void tscam(struct Scsi_Host *host)
}
*/
- tmport = dev->ioport[0] + 1;
- outb(0x08, tmport++);
- outb(0x7f, tmport);
- tmport = dev->ioport[0] + 0x11;
- outb(0x20, tmport);
+ atp_writeb_io(dev, 0, 1, 0x08);
+ atp_writeb_io(dev, 0, 2, 0x7f);
+ atp_writeb_io(dev, 0, 0x11, 0x20);
- if ((dev->scam_on & 0x40) == 0) {
+ if ((scam_on & 0x40) == 0) {
return;
}
m = 1;
m <<= dev->host_id[0];
j = 16;
- if (dev->chip_ver < 4) {
+ if (!wide_chip) {
m |= 0xff00;
j = 8;
}
assignid_map = m;
- tmport = dev->ioport[0] + 0x02;
- outb(0x02, tmport++); /* 2*2=4ms,3EH 2/32*3E=3.9ms */
- outb(0, tmport++);
- outb(0, tmport++);
- outb(0, tmport++);
- outb(0, tmport++);
- outb(0, tmport++);
- outb(0, tmport++);
+ atp_writeb_io(dev, 0, 0x02, 0x02); /* 2*2=4ms,3EH 2/32*3E=3.9ms */
+ atp_writeb_io(dev, 0, 0x03, 0);
+ atp_writeb_io(dev, 0, 0x04, 0);
+ atp_writeb_io(dev, 0, 0x05, 0);
+ atp_writeb_io(dev, 0, 0x06, 0);
+ atp_writeb_io(dev, 0, 0x07, 0);
+ atp_writeb_io(dev, 0, 0x08, 0);
for (i = 0; i < j; i++) {
m = 1;
@@ -1087,92 +1011,73 @@ static void tscam(struct Scsi_Host *host)
if ((m & assignid_map) != 0) {
continue;
}
- tmport = dev->ioport[0] + 0x0f;
- outb(0, tmport++);
- tmport += 0x02;
- outb(0, tmport++);
- outb(0, tmport++);
- outb(0, tmport++);
+ atp_writeb_io(dev, 0, 0x0f, 0);
+ atp_writeb_io(dev, 0, 0x12, 0);
+ atp_writeb_io(dev, 0, 0x13, 0);
+ atp_writeb_io(dev, 0, 0x14, 0);
if (i > 7) {
k = (i & 0x07) | 0x40;
} else {
k = i;
}
- outb(k, tmport++);
- tmport = dev->ioport[0] + 0x1b;
- if (dev->chip_ver == 4) {
- outb(0x01, tmport);
- } else {
- outb(0x00, tmport);
- }
-wait_rdyok:
- tmport = dev->ioport[0] + 0x18;
- outb(0x09, tmport);
- tmport += 0x07;
-
- while ((inb(tmport) & 0x80) == 0x00)
- cpu_relax();
- tmport -= 0x08;
- k = inb(tmport);
- if (k != 0x16) {
- if ((k == 0x85) || (k == 0x42)) {
- continue;
- }
- tmport = dev->ioport[0] + 0x10;
- outb(0x41, tmport);
- goto wait_rdyok;
- }
+ atp_writeb_io(dev, 0, 0x15, k);
+ if (wide_chip)
+ atp_writeb_io(dev, 0, 0x1b, 0x01);
+ else
+ atp_writeb_io(dev, 0, 0x1b, 0x00);
+ do {
+ atp_writeb_io(dev, 0, 0x18, 0x09);
+
+ while ((atp_readb_io(dev, 0, 0x1f) & 0x80) == 0x00)
+ cpu_relax();
+ k = atp_readb_io(dev, 0, 0x17);
+ if ((k == 0x85) || (k == 0x42))
+ break;
+ if (k != 0x16)
+ atp_writeb_io(dev, 0, 0x10, 0x41);
+ } while (k != 0x16);
+ if ((k == 0x85) || (k == 0x42))
+ continue;
assignid_map |= m;
}
- tmport = dev->ioport[0] + 0x02;
- outb(0x7f, tmport);
- tmport = dev->ioport[0] + 0x1b;
- outb(0x02, tmport);
+ atp_writeb_io(dev, 0, 0x02, 0x7f);
+ atp_writeb_io(dev, 0, 0x1b, 0x02);
- outb(0, 0x80);
+ udelay(2);
val = 0x0080; /* bsy */
- tmport = dev->ioport[0] + 0x1c;
- outw(val, tmport);
+ atp_writew_io(dev, 0, 0x1c, val);
val |= 0x0040; /* sel */
- outw(val, tmport);
+ atp_writew_io(dev, 0, 0x1c, val);
val |= 0x0004; /* msg */
- outw(val, tmport);
- inb(0x80); /* 2 deskew delay(45ns*2=90ns) */
+ atp_writew_io(dev, 0, 0x1c, val);
+ udelay(2); /* 2 deskew delay(45ns*2=90ns) */
val &= 0x007f; /* no bsy */
- outw(val, tmport);
+ atp_writew_io(dev, 0, 0x1c, val);
mdelay(128);
val &= 0x00fb; /* after 1ms no msg */
- outw(val, tmport);
-wait_nomsg:
- if ((inb(tmport) & 0x04) != 0) {
- goto wait_nomsg;
- }
- outb(1, 0x80);
+ atp_writew_io(dev, 0, 0x1c, val);
+ while ((atp_readb_io(dev, 0, 0x1c) & 0x04) != 0)
+ ;
+ udelay(2);
udelay(100);
- for (n = 0; n < 0x30000; n++) {
- if ((inb(tmport) & 0x80) != 0) { /* bsy ? */
- goto wait_io;
- }
- }
- goto TCM_SYNC;
-wait_io:
- for (n = 0; n < 0x30000; n++) {
- if ((inb(tmport) & 0x81) == 0x0081) {
- goto wait_io1;
- }
- }
- goto TCM_SYNC;
-wait_io1:
- inb(0x80);
- val |= 0x8003; /* io,cd,db7 */
- outw(val, tmport);
- inb(0x80);
- val &= 0x00bf; /* no sel */
- outw(val, tmport);
- outb(2, 0x80);
-TCM_SYNC:
+ for (n = 0; n < 0x30000; n++)
+ if ((atp_readb_io(dev, 0, 0x1c) & 0x80) != 0) /* bsy ? */
+ break;
+ if (n < 0x30000)
+ for (n = 0; n < 0x30000; n++)
+ if ((atp_readb_io(dev, 0, 0x1c) & 0x81) == 0x0081) {
+ udelay(2);
+ val |= 0x8003; /* io,cd,db7 */
+ atp_writew_io(dev, 0, 0x1c, val);
+ udelay(2);
+ val &= 0x00bf; /* no sel */
+ atp_writew_io(dev, 0, 0x1c, val);
+ udelay(2);
+ break;
+ }
+ while (1) {
/*
* The funny division into multiple delays is to accomodate
* arches like ARM where udelay() multiplies its argument by
@@ -1183,55 +1088,48 @@ TCM_SYNC:
*/
mdelay(2);
udelay(48);
- if ((inb(tmport) & 0x80) == 0x00) { /* bsy ? */
- outw(0, tmport--);
- outb(0, tmport);
- tmport = dev->ioport[0] + 0x15;
- outb(0, tmport);
- tmport += 0x03;
- outb(0x09, tmport);
- tmport += 0x07;
- while ((inb(tmport) & 0x80) == 0)
+ if ((atp_readb_io(dev, 0, 0x1c) & 0x80) == 0x00) { /* bsy ? */
+ atp_writew_io(dev, 0, 0x1c, 0);
+ atp_writeb_io(dev, 0, 0x1b, 0);
+ atp_writeb_io(dev, 0, 0x15, 0);
+ atp_writeb_io(dev, 0, 0x18, 0x09);
+ while ((atp_readb_io(dev, 0, 0x1f) & 0x80) == 0)
cpu_relax();
- tmport -= 0x08;
- inb(tmport);
+ atp_readb_io(dev, 0, 0x17);
return;
}
val &= 0x00ff; /* synchronization */
val |= 0x3f00;
fun_scam(dev, &val);
- outb(3, 0x80);
+ udelay(2);
val &= 0x00ff; /* isolation */
val |= 0x2000;
fun_scam(dev, &val);
- outb(4, 0x80);
+ udelay(2);
i = 8;
j = 0;
-TCM_ID:
- if ((inw(tmport) & 0x2000) == 0) {
- goto TCM_ID;
- }
- outb(5, 0x80);
- val &= 0x00ff; /* get ID_STRING */
- val |= 0x2000;
- k = fun_scam(dev, &val);
- if ((k & 0x03) == 0) {
- goto TCM_5;
- }
- mbuf[j] <<= 0x01;
- mbuf[j] &= 0xfe;
- if ((k & 0x02) != 0) {
- mbuf[j] |= 0x01;
- }
- i--;
- if (i > 0) {
- goto TCM_ID;
+
+ while (1) {
+ if ((atp_readw_io(dev, 0, 0x1c) & 0x2000) == 0)
+ continue;
+ udelay(2);
+ val &= 0x00ff; /* get ID_STRING */
+ val |= 0x2000;
+ k = fun_scam(dev, &val);
+ if ((k & 0x03) == 0)
+ break;
+ mbuf[j] <<= 0x01;
+ mbuf[j] &= 0xfe;
+ if ((k & 0x02) != 0)
+ mbuf[j] |= 0x01;
+ i--;
+ if (i > 0)
+ continue;
+ j++;
+ i = 8;
}
- j++;
- i = 8;
- goto TCM_ID;
-TCM_5: /* isolation complete.. */
+ /* isolation complete.. */
/* mbuf[32]=0;
printk(" \n%x %x %x %s\n ",assignid_map,mbuf[0],mbuf[1],&mbuf[2]); */
i = 15;
@@ -1239,33 +1137,33 @@ TCM_5: /* isolation complete.. */
if ((j & 0x20) != 0) { /* bit5=1:ID up to 7 */
i = 7;
}
- if ((j & 0x06) == 0) { /* IDvalid? */
- goto G2Q5;
- }
- k = mbuf[1];
-small_id:
- m = 1;
- m <<= k;
- if ((m & assignid_map) == 0) {
- goto G2Q_QUIN;
- }
- if (k > 0) {
- k--;
- goto small_id;
- }
-G2Q5: /* srch from max acceptable ID# */
- k = i; /* max acceptable ID# */
-G2Q_LP:
- m = 1;
- m <<= k;
- if ((m & assignid_map) == 0) {
- goto G2Q_QUIN;
+ if ((j & 0x06) != 0) { /* IDvalid? */
+ k = mbuf[1];
+ while (1) {
+ m = 1;
+ m <<= k;
+ if ((m & assignid_map) == 0)
+ break;
+ if (k > 0)
+ k--;
+ else
+ break;
+ }
}
- if (k > 0) {
- k--;
- goto G2Q_LP;
+ if ((m & assignid_map) != 0) { /* srch from max acceptable ID# */
+ k = i; /* max acceptable ID# */
+ while (1) {
+ m = 1;
+ m <<= k;
+ if ((m & assignid_map) == 0)
+ break;
+ if (k > 0)
+ k--;
+ else
+ break;
+ }
}
-G2Q_QUIN: /* k=binID#, */
+ /* k=binID#, */
assignid_map |= m;
if (k < 8) {
quintet[0] = 0x38; /* 1st dft ID<8 */
@@ -1284,1227 +1182,6 @@ G2Q_QUIN: /* k=binID#, */
val |= m;
fun_scam(dev, &val);
- goto TCM_SYNC;
-
-}
-
-static void is870(struct atp_unit *dev, unsigned int wkport)
-{
- unsigned int tmport;
- unsigned char i, j, k, rmb, n;
- unsigned short int m;
- static unsigned char mbuf[512];
- static unsigned char satn[9] = { 0, 0, 0, 0, 0, 0, 0, 6, 6 };
- static unsigned char inqd[9] = { 0x12, 0, 0, 0, 0x24, 0, 0, 0x24, 6 };
- static unsigned char synn[6] = { 0x80, 1, 3, 1, 0x19, 0x0e };
- static unsigned char synu[6] = { 0x80, 1, 3, 1, 0x0c, 0x0e };
- static unsigned char synw[6] = { 0x80, 1, 3, 1, 0x0c, 0x07 };
- static unsigned char wide[6] = { 0x80, 1, 2, 3, 1, 0 };
-
- tmport = wkport + 0x3a;
- outb((unsigned char) (inb(tmport) | 0x10), tmport);
-
- for (i = 0; i < 16; i++) {
- if ((dev->chip_ver != 4) && (i > 7)) {
- break;
- }
- m = 1;
- m = m << i;
- if ((m & dev->active_id[0]) != 0) {
- continue;
- }
- if (i == dev->host_id[0]) {
- printk(KERN_INFO " ID: %2d Host Adapter\n", dev->host_id[0]);
- continue;
- }
- tmport = wkport + 0x1b;
- if (dev->chip_ver == 4) {
- outb(0x01, tmport);
- } else {
- outb(0x00, tmport);
- }
- tmport = wkport + 1;
- outb(0x08, tmport++);
- outb(0x7f, tmport++);
- outb(satn[0], tmport++);
- outb(satn[1], tmport++);
- outb(satn[2], tmport++);
- outb(satn[3], tmport++);
- outb(satn[4], tmport++);
- outb(satn[5], tmport++);
- tmport += 0x06;
- outb(0, tmport);
- tmport += 0x02;
- outb(dev->id[0][i].devsp, tmport++);
- outb(0, tmport++);
- outb(satn[6], tmport++);
- outb(satn[7], tmport++);
- j = i;
- if ((j & 0x08) != 0) {
- j = (j & 0x07) | 0x40;
- }
- outb(j, tmport);
- tmport += 0x03;
- outb(satn[8], tmport);
- tmport += 0x07;
-
- while ((inb(tmport) & 0x80) == 0x00)
- cpu_relax();
-
- tmport -= 0x08;
- if (inb(tmport) != 0x11 && inb(tmport) != 0x8e)
- continue;
-
- while (inb(tmport) != 0x8e)
- cpu_relax();
-
- dev->active_id[0] |= m;
-
- tmport = wkport + 0x10;
- outb(0x30, tmport);
- tmport = wkport + 0x04;
- outb(0x00, tmport);
-
-phase_cmd:
- tmport = wkport + 0x18;
- outb(0x08, tmport);
- tmport += 0x07;
- while ((inb(tmport) & 0x80) == 0x00)
- cpu_relax();
- tmport -= 0x08;
- j = inb(tmport);
- if (j != 0x16) {
- tmport = wkport + 0x10;
- outb(0x41, tmport);
- goto phase_cmd;
- }
-sel_ok:
- tmport = wkport + 3;
- outb(inqd[0], tmport++);
- outb(inqd[1], tmport++);
- outb(inqd[2], tmport++);
- outb(inqd[3], tmport++);
- outb(inqd[4], tmport++);
- outb(inqd[5], tmport);
- tmport += 0x07;
- outb(0, tmport);
- tmport += 0x02;
- outb(dev->id[0][i].devsp, tmport++);
- outb(0, tmport++);
- outb(inqd[6], tmport++);
- outb(inqd[7], tmport++);
- tmport += 0x03;
- outb(inqd[8], tmport);
- tmport += 0x07;
-
- while ((inb(tmport) & 0x80) == 0x00)
- cpu_relax();
-
- tmport -= 0x08;
- if (inb(tmport) != 0x11 && inb(tmport) != 0x8e)
- continue;
-
- while (inb(tmport) != 0x8e)
- cpu_relax();
-
- tmport = wkport + 0x1b;
- if (dev->chip_ver == 4)
- outb(0x00, tmport);
-
- tmport = wkport + 0x18;
- outb(0x08, tmport);
- tmport += 0x07;
- j = 0;
-rd_inq_data:
- k = inb(tmport);
- if ((k & 0x01) != 0) {
- tmport -= 0x06;
- mbuf[j++] = inb(tmport);
- tmport += 0x06;
- goto rd_inq_data;
- }
- if ((k & 0x80) == 0) {
- goto rd_inq_data;
- }
- tmport -= 0x08;
- j = inb(tmport);
- if (j == 0x16) {
- goto inq_ok;
- }
- tmport = wkport + 0x10;
- outb(0x46, tmport);
- tmport += 0x02;
- outb(0, tmport++);
- outb(0, tmport++);
- outb(0, tmport++);
- tmport += 0x03;
- outb(0x08, tmport);
- tmport += 0x07;
-
- while ((inb(tmport) & 0x80) == 0x00)
- cpu_relax();
-
- tmport -= 0x08;
- if (inb(tmport) != 0x16) {
- goto sel_ok;
- }
-inq_ok:
- mbuf[36] = 0;
- printk(KERN_INFO " ID: %2d %s\n", i, &mbuf[8]);
- dev->id[0][i].devtype = mbuf[0];
- rmb = mbuf[1];
- n = mbuf[7];
- if (dev->chip_ver != 4) {
- goto not_wide;
- }
- if ((mbuf[7] & 0x60) == 0) {
- goto not_wide;
- }
- if ((dev->global_map[0] & 0x20) == 0) {
- goto not_wide;
- }
- tmport = wkport + 0x1b;
- outb(0x01, tmport);
- tmport = wkport + 3;
- outb(satn[0], tmport++);
- outb(satn[1], tmport++);
- outb(satn[2], tmport++);
- outb(satn[3], tmport++);
- outb(satn[4], tmport++);
- outb(satn[5], tmport++);
- tmport += 0x06;
- outb(0, tmport);
- tmport += 0x02;
- outb(dev->id[0][i].devsp, tmport++);
- outb(0, tmport++);
- outb(satn[6], tmport++);
- outb(satn[7], tmport++);
- tmport += 0x03;
- outb(satn[8], tmport);
- tmport += 0x07;
-
- while ((inb(tmport) & 0x80) == 0x00)
- cpu_relax();
-
- tmport -= 0x08;
- if (inb(tmport) != 0x11 && inb(tmport) != 0x8e)
- continue;
-
- while (inb(tmport) != 0x8e)
- cpu_relax();
-
-try_wide:
- j = 0;
- tmport = wkport + 0x14;
- outb(0x05, tmport);
- tmport += 0x04;
- outb(0x20, tmport);
- tmport += 0x07;
-
- while ((inb(tmport) & 0x80) == 0) {
- if ((inb(tmport) & 0x01) != 0) {
- tmport -= 0x06;
- outb(wide[j++], tmport);
- tmport += 0x06;
- }
- }
- tmport -= 0x08;
-
- while ((inb(tmport) & 0x80) == 0x00)
- cpu_relax();
-
- j = inb(tmport) & 0x0f;
- if (j == 0x0f) {
- goto widep_in;
- }
- if (j == 0x0a) {
- goto widep_cmd;
- }
- if (j == 0x0e) {
- goto try_wide;
- }
- continue;
-widep_out:
- tmport = wkport + 0x18;
- outb(0x20, tmport);
- tmport += 0x07;
- while ((inb(tmport) & 0x80) == 0) {
- if ((inb(tmport) & 0x01) != 0) {
- tmport -= 0x06;
- outb(0, tmport);
- tmport += 0x06;
- }
- }
- tmport -= 0x08;
- j = inb(tmport) & 0x0f;
- if (j == 0x0f) {
- goto widep_in;
- }
- if (j == 0x0a) {
- goto widep_cmd;
- }
- if (j == 0x0e) {
- goto widep_out;
- }
- continue;
-widep_in:
- tmport = wkport + 0x14;
- outb(0xff, tmport);
- tmport += 0x04;
- outb(0x20, tmport);
- tmport += 0x07;
- k = 0;
-widep_in1:
- j = inb(tmport);
- if ((j & 0x01) != 0) {
- tmport -= 0x06;
- mbuf[k++] = inb(tmport);
- tmport += 0x06;
- goto widep_in1;
- }
- if ((j & 0x80) == 0x00) {
- goto widep_in1;
- }
- tmport -= 0x08;
- j = inb(tmport) & 0x0f;
- if (j == 0x0f) {
- goto widep_in;
- }
- if (j == 0x0a) {
- goto widep_cmd;
- }
- if (j == 0x0e) {
- goto widep_out;
- }
- continue;
-widep_cmd:
- tmport = wkport + 0x10;
- outb(0x30, tmport);
- tmport = wkport + 0x14;
- outb(0x00, tmport);
- tmport += 0x04;
- outb(0x08, tmport);
- tmport += 0x07;
-
- while ((inb(tmport) & 0x80) == 0x00)
- cpu_relax();
-
- tmport -= 0x08;
- j = inb(tmport);
- if (j != 0x16) {
- if (j == 0x4e) {
- goto widep_out;
- }
- continue;
- }
- if (mbuf[0] != 0x01) {
- goto not_wide;
- }
- if (mbuf[1] != 0x02) {
- goto not_wide;
- }
- if (mbuf[2] != 0x03) {
- goto not_wide;
- }
- if (mbuf[3] != 0x01) {
- goto not_wide;
- }
- m = 1;
- m = m << i;
- dev->wide_id[0] |= m;
-not_wide:
- if ((dev->id[0][i].devtype == 0x00) || (dev->id[0][i].devtype == 0x07) || ((dev->id[0][i].devtype == 0x05) && ((n & 0x10) != 0))) {
- goto set_sync;
- }
- continue;
-set_sync:
- tmport = wkport + 0x1b;
- j = 0;
- if ((m & dev->wide_id[0]) != 0) {
- j |= 0x01;
- }
- outb(j, tmport);
- tmport = wkport + 3;
- outb(satn[0], tmport++);
- outb(satn[1], tmport++);
- outb(satn[2], tmport++);
- outb(satn[3], tmport++);
- outb(satn[4], tmport++);
- outb(satn[5], tmport++);
- tmport += 0x06;
- outb(0, tmport);
- tmport += 0x02;
- outb(dev->id[0][i].devsp, tmport++);
- outb(0, tmport++);
- outb(satn[6], tmport++);
- outb(satn[7], tmport++);
- tmport += 0x03;
- outb(satn[8], tmport);
- tmport += 0x07;
-
- while ((inb(tmport) & 0x80) == 0x00)
- cpu_relax();
-
- tmport -= 0x08;
- if (inb(tmport) != 0x11 && inb(tmport) != 0x8e)
- continue;
-
- while (inb(tmport) != 0x8e)
- cpu_relax();
-
-try_sync:
- j = 0;
- tmport = wkport + 0x14;
- outb(0x06, tmport);
- tmport += 0x04;
- outb(0x20, tmport);
- tmport += 0x07;
-
- while ((inb(tmport) & 0x80) == 0) {
- if ((inb(tmport) & 0x01) != 0) {
- tmport -= 0x06;
- if ((m & dev->wide_id[0]) != 0) {
- outb(synw[j++], tmport);
- } else {
- if ((m & dev->ultra_map[0]) != 0) {
- outb(synu[j++], tmport);
- } else {
- outb(synn[j++], tmport);
- }
- }
- tmport += 0x06;
- }
- }
- tmport -= 0x08;
-
- while ((inb(tmport) & 0x80) == 0x00)
- cpu_relax();
-
- j = inb(tmport) & 0x0f;
- if (j == 0x0f) {
- goto phase_ins;
- }
- if (j == 0x0a) {
- goto phase_cmds;
- }
- if (j == 0x0e) {
- goto try_sync;
- }
- continue;
-phase_outs:
- tmport = wkport + 0x18;
- outb(0x20, tmport);
- tmport += 0x07;
- while ((inb(tmport) & 0x80) == 0x00) {
- if ((inb(tmport) & 0x01) != 0x00) {
- tmport -= 0x06;
- outb(0x00, tmport);
- tmport += 0x06;
- }
- }
- tmport -= 0x08;
- j = inb(tmport);
- if (j == 0x85) {
- goto tar_dcons;
- }
- j &= 0x0f;
- if (j == 0x0f) {
- goto phase_ins;
- }
- if (j == 0x0a) {
- goto phase_cmds;
- }
- if (j == 0x0e) {
- goto phase_outs;
- }
- continue;
-phase_ins:
- tmport = wkport + 0x14;
- outb(0xff, tmport);
- tmport += 0x04;
- outb(0x20, tmport);
- tmport += 0x07;
- k = 0;
-phase_ins1:
- j = inb(tmport);
- if ((j & 0x01) != 0x00) {
- tmport -= 0x06;
- mbuf[k++] = inb(tmport);
- tmport += 0x06;
- goto phase_ins1;
- }
- if ((j & 0x80) == 0x00) {
- goto phase_ins1;
- }
- tmport -= 0x08;
-
- while ((inb(tmport) & 0x80) == 0x00)
- cpu_relax();
-
- j = inb(tmport);
- if (j == 0x85) {
- goto tar_dcons;
- }
- j &= 0x0f;
- if (j == 0x0f) {
- goto phase_ins;
- }
- if (j == 0x0a) {
- goto phase_cmds;
- }
- if (j == 0x0e) {
- goto phase_outs;
- }
- continue;
-phase_cmds:
- tmport = wkport + 0x10;
- outb(0x30, tmport);
-tar_dcons:
- tmport = wkport + 0x14;
- outb(0x00, tmport);
- tmport += 0x04;
- outb(0x08, tmport);
- tmport += 0x07;
-
- while ((inb(tmport) & 0x80) == 0x00)
- cpu_relax();
-
- tmport -= 0x08;
- j = inb(tmport);
- if (j != 0x16) {
- continue;
- }
- if (mbuf[0] != 0x01) {
- continue;
- }
- if (mbuf[1] != 0x03) {
- continue;
- }
- if (mbuf[4] == 0x00) {
- continue;
- }
- if (mbuf[3] > 0x64) {
- continue;
- }
- if (mbuf[4] > 0x0c) {
- mbuf[4] = 0x0c;
- }
- dev->id[0][i].devsp = mbuf[4];
- if ((mbuf[3] < 0x0d) && (rmb == 0)) {
- j = 0xa0;
- goto set_syn_ok;
- }
- if (mbuf[3] < 0x1a) {
- j = 0x20;
- goto set_syn_ok;
- }
- if (mbuf[3] < 0x33) {
- j = 0x40;
- goto set_syn_ok;
- }
- if (mbuf[3] < 0x4c) {
- j = 0x50;
- goto set_syn_ok;
- }
- j = 0x60;
-set_syn_ok:
- dev->id[0][i].devsp = (dev->id[0][i].devsp & 0x0f) | j;
- }
- tmport = wkport + 0x3a;
- outb((unsigned char) (inb(tmport) & 0xef), tmport);
-}
-
-static void is880(struct atp_unit *dev, unsigned int wkport)
-{
- unsigned int tmport;
- unsigned char i, j, k, rmb, n, lvdmode;
- unsigned short int m;
- static unsigned char mbuf[512];
- static unsigned char satn[9] = { 0, 0, 0, 0, 0, 0, 0, 6, 6 };
- static unsigned char inqd[9] = { 0x12, 0, 0, 0, 0x24, 0, 0, 0x24, 6 };
- static unsigned char synn[6] = { 0x80, 1, 3, 1, 0x19, 0x0e };
- unsigned char synu[6] = { 0x80, 1, 3, 1, 0x0a, 0x0e };
- static unsigned char synw[6] = { 0x80, 1, 3, 1, 0x19, 0x0e };
- unsigned char synuw[6] = { 0x80, 1, 3, 1, 0x0a, 0x0e };
- static unsigned char wide[6] = { 0x80, 1, 2, 3, 1, 0 };
- static unsigned char u3[9] = { 0x80, 1, 6, 4, 0x09, 00, 0x0e, 0x01, 0x02 };
-
- lvdmode = inb(wkport + 0x3f) & 0x40;
-
- for (i = 0; i < 16; i++) {
- m = 1;
- m = m << i;
- if ((m & dev->active_id[0]) != 0) {
- continue;
- }
- if (i == dev->host_id[0]) {
- printk(KERN_INFO " ID: %2d Host Adapter\n", dev->host_id[0]);
- continue;
- }
- tmport = wkport + 0x5b;
- outb(0x01, tmport);
- tmport = wkport + 0x41;
- outb(0x08, tmport++);
- outb(0x7f, tmport++);
- outb(satn[0], tmport++);
- outb(satn[1], tmport++);
- outb(satn[2], tmport++);
- outb(satn[3], tmport++);
- outb(satn[4], tmport++);
- outb(satn[5], tmport++);
- tmport += 0x06;
- outb(0, tmport);
- tmport += 0x02;
- outb(dev->id[0][i].devsp, tmport++);
- outb(0, tmport++);
- outb(satn[6], tmport++);
- outb(satn[7], tmport++);
- j = i;
- if ((j & 0x08) != 0) {
- j = (j & 0x07) | 0x40;
- }
- outb(j, tmport);
- tmport += 0x03;
- outb(satn[8], tmport);
- tmport += 0x07;
-
- while ((inb(tmport) & 0x80) == 0x00)
- cpu_relax();
-
- tmport -= 0x08;
- if (inb(tmport) != 0x11 && inb(tmport) != 0x8e)
- continue;
-
- while (inb(tmport) != 0x8e)
- cpu_relax();
-
- dev->active_id[0] |= m;
-
- tmport = wkport + 0x50;
- outb(0x30, tmport);
- tmport = wkport + 0x54;
- outb(0x00, tmport);
-
-phase_cmd:
- tmport = wkport + 0x58;
- outb(0x08, tmport);
- tmport += 0x07;
-
- while ((inb(tmport) & 0x80) == 0x00)
- cpu_relax();
-
- tmport -= 0x08;
- j = inb(tmport);
- if (j != 0x16) {
- tmport = wkport + 0x50;
- outb(0x41, tmport);
- goto phase_cmd;
- }
-sel_ok:
- tmport = wkport + 0x43;
- outb(inqd[0], tmport++);
- outb(inqd[1], tmport++);
- outb(inqd[2], tmport++);
- outb(inqd[3], tmport++);
- outb(inqd[4], tmport++);
- outb(inqd[5], tmport);
- tmport += 0x07;
- outb(0, tmport);
- tmport += 0x02;
- outb(dev->id[0][i].devsp, tmport++);
- outb(0, tmport++);
- outb(inqd[6], tmport++);
- outb(inqd[7], tmport++);
- tmport += 0x03;
- outb(inqd[8], tmport);
- tmport += 0x07;
-
- while ((inb(tmport) & 0x80) == 0x00)
- cpu_relax();
-
- tmport -= 0x08;
- if (inb(tmport) != 0x11 && inb(tmport) != 0x8e)
- continue;
-
- while (inb(tmport) != 0x8e)
- cpu_relax();
-
- tmport = wkport + 0x5b;
- outb(0x00, tmport);
- tmport = wkport + 0x58;
- outb(0x08, tmport);
- tmport += 0x07;
- j = 0;
-rd_inq_data:
- k = inb(tmport);
- if ((k & 0x01) != 0) {
- tmport -= 0x06;
- mbuf[j++] = inb(tmport);
- tmport += 0x06;
- goto rd_inq_data;
- }
- if ((k & 0x80) == 0) {
- goto rd_inq_data;
- }
- tmport -= 0x08;
- j = inb(tmport);
- if (j == 0x16) {
- goto inq_ok;
- }
- tmport = wkport + 0x50;
- outb(0x46, tmport);
- tmport += 0x02;
- outb(0, tmport++);
- outb(0, tmport++);
- outb(0, tmport++);
- tmport += 0x03;
- outb(0x08, tmport);
- tmport += 0x07;
- while ((inb(tmport) & 0x80) == 0x00)
- cpu_relax();
-
- tmport -= 0x08;
- if (inb(tmport) != 0x16)
- goto sel_ok;
-
-inq_ok:
- mbuf[36] = 0;
- printk(KERN_INFO " ID: %2d %s\n", i, &mbuf[8]);
- dev->id[0][i].devtype = mbuf[0];
- rmb = mbuf[1];
- n = mbuf[7];
- if ((mbuf[7] & 0x60) == 0) {
- goto not_wide;
- }
- if ((i < 8) && ((dev->global_map[0] & 0x20) == 0)) {
- goto not_wide;
- }
- if (lvdmode == 0) {
- goto chg_wide;
- }
- if (dev->sp[0][i] != 0x04) // force u2
- {
- goto chg_wide;
- }
-
- tmport = wkport + 0x5b;
- outb(0x01, tmport);
- tmport = wkport + 0x43;
- outb(satn[0], tmport++);
- outb(satn[1], tmport++);
- outb(satn[2], tmport++);
- outb(satn[3], tmport++);
- outb(satn[4], tmport++);
- outb(satn[5], tmport++);
- tmport += 0x06;
- outb(0, tmport);
- tmport += 0x02;
- outb(dev->id[0][i].devsp, tmport++);
- outb(0, tmport++);
- outb(satn[6], tmport++);
- outb(satn[7], tmport++);
- tmport += 0x03;
- outb(satn[8], tmport);
- tmport += 0x07;
-
- while ((inb(tmport) & 0x80) == 0x00)
- cpu_relax();
-
- tmport -= 0x08;
-
- if (inb(tmport) != 0x11 && inb(tmport) != 0x8e)
- continue;
-
- while (inb(tmport) != 0x8e)
- cpu_relax();
-
-try_u3:
- j = 0;
- tmport = wkport + 0x54;
- outb(0x09, tmport);
- tmport += 0x04;
- outb(0x20, tmport);
- tmport += 0x07;
-
- while ((inb(tmport) & 0x80) == 0) {
- if ((inb(tmport) & 0x01) != 0) {
- tmport -= 0x06;
- outb(u3[j++], tmport);
- tmport += 0x06;
- }
- }
- tmport -= 0x08;
-
- while ((inb(tmport) & 0x80) == 0x00)
- cpu_relax();
-
- j = inb(tmport) & 0x0f;
- if (j == 0x0f) {
- goto u3p_in;
- }
- if (j == 0x0a) {
- goto u3p_cmd;
- }
- if (j == 0x0e) {
- goto try_u3;
- }
- continue;
-u3p_out:
- tmport = wkport + 0x58;
- outb(0x20, tmport);
- tmport += 0x07;
- while ((inb(tmport) & 0x80) == 0) {
- if ((inb(tmport) & 0x01) != 0) {
- tmport -= 0x06;
- outb(0, tmport);
- tmport += 0x06;
- }
- }
- tmport -= 0x08;
- j = inb(tmport) & 0x0f;
- if (j == 0x0f) {
- goto u3p_in;
- }
- if (j == 0x0a) {
- goto u3p_cmd;
- }
- if (j == 0x0e) {
- goto u3p_out;
- }
- continue;
-u3p_in:
- tmport = wkport + 0x54;
- outb(0x09, tmport);
- tmport += 0x04;
- outb(0x20, tmport);
- tmport += 0x07;
- k = 0;
-u3p_in1:
- j = inb(tmport);
- if ((j & 0x01) != 0) {
- tmport -= 0x06;
- mbuf[k++] = inb(tmport);
- tmport += 0x06;
- goto u3p_in1;
- }
- if ((j & 0x80) == 0x00) {
- goto u3p_in1;
- }
- tmport -= 0x08;
- j = inb(tmport) & 0x0f;
- if (j == 0x0f) {
- goto u3p_in;
- }
- if (j == 0x0a) {
- goto u3p_cmd;
- }
- if (j == 0x0e) {
- goto u3p_out;
- }
- continue;
-u3p_cmd:
- tmport = wkport + 0x50;
- outb(0x30, tmport);
- tmport = wkport + 0x54;
- outb(0x00, tmport);
- tmport += 0x04;
- outb(0x08, tmport);
- tmport += 0x07;
-
- while ((inb(tmport) & 0x80) == 0x00)
- cpu_relax();
-
- tmport -= 0x08;
- j = inb(tmport);
- if (j != 0x16) {
- if (j == 0x4e) {
- goto u3p_out;
- }
- continue;
- }
- if (mbuf[0] != 0x01) {
- goto chg_wide;
- }
- if (mbuf[1] != 0x06) {
- goto chg_wide;
- }
- if (mbuf[2] != 0x04) {
- goto chg_wide;
- }
- if (mbuf[3] == 0x09) {
- m = 1;
- m = m << i;
- dev->wide_id[0] |= m;
- dev->id[0][i].devsp = 0xce;
- continue;
- }
-chg_wide:
- tmport = wkport + 0x5b;
- outb(0x01, tmport);
- tmport = wkport + 0x43;
- outb(satn[0], tmport++);
- outb(satn[1], tmport++);
- outb(satn[2], tmport++);
- outb(satn[3], tmport++);
- outb(satn[4], tmport++);
- outb(satn[5], tmport++);
- tmport += 0x06;
- outb(0, tmport);
- tmport += 0x02;
- outb(dev->id[0][i].devsp, tmport++);
- outb(0, tmport++);
- outb(satn[6], tmport++);
- outb(satn[7], tmport++);
- tmport += 0x03;
- outb(satn[8], tmport);
- tmport += 0x07;
-
- while ((inb(tmport) & 0x80) == 0x00)
- cpu_relax();
-
- tmport -= 0x08;
- if (inb(tmport) != 0x11 && inb(tmport) != 0x8e)
- continue;
-
- while (inb(tmport) != 0x8e)
- cpu_relax();
-
-try_wide:
- j = 0;
- tmport = wkport + 0x54;
- outb(0x05, tmport);
- tmport += 0x04;
- outb(0x20, tmport);
- tmport += 0x07;
-
- while ((inb(tmport) & 0x80) == 0) {
- if ((inb(tmport) & 0x01) != 0) {
- tmport -= 0x06;
- outb(wide[j++], tmport);
- tmport += 0x06;
- }
- }
- tmport -= 0x08;
- while ((inb(tmport) & 0x80) == 0x00)
- cpu_relax();
-
- j = inb(tmport) & 0x0f;
- if (j == 0x0f) {
- goto widep_in;
- }
- if (j == 0x0a) {
- goto widep_cmd;
- }
- if (j == 0x0e) {
- goto try_wide;
- }
- continue;
-widep_out:
- tmport = wkport + 0x58;
- outb(0x20, tmport);
- tmport += 0x07;
- while ((inb(tmport) & 0x80) == 0) {
- if ((inb(tmport) & 0x01) != 0) {
- tmport -= 0x06;
- outb(0, tmport);
- tmport += 0x06;
- }
- }
- tmport -= 0x08;
- j = inb(tmport) & 0x0f;
- if (j == 0x0f) {
- goto widep_in;
- }
- if (j == 0x0a) {
- goto widep_cmd;
- }
- if (j == 0x0e) {
- goto widep_out;
- }
- continue;
-widep_in:
- tmport = wkport + 0x54;
- outb(0xff, tmport);
- tmport += 0x04;
- outb(0x20, tmport);
- tmport += 0x07;
- k = 0;
-widep_in1:
- j = inb(tmport);
- if ((j & 0x01) != 0) {
- tmport -= 0x06;
- mbuf[k++] = inb(tmport);
- tmport += 0x06;
- goto widep_in1;
- }
- if ((j & 0x80) == 0x00) {
- goto widep_in1;
- }
- tmport -= 0x08;
- j = inb(tmport) & 0x0f;
- if (j == 0x0f) {
- goto widep_in;
- }
- if (j == 0x0a) {
- goto widep_cmd;
- }
- if (j == 0x0e) {
- goto widep_out;
- }
- continue;
-widep_cmd:
- tmport = wkport + 0x50;
- outb(0x30, tmport);
- tmport = wkport + 0x54;
- outb(0x00, tmport);
- tmport += 0x04;
- outb(0x08, tmport);
- tmport += 0x07;
-
- while ((inb(tmport) & 0x80) == 0x00)
- cpu_relax();
-
- tmport -= 0x08;
- j = inb(tmport);
- if (j != 0x16) {
- if (j == 0x4e) {
- goto widep_out;
- }
- continue;
- }
- if (mbuf[0] != 0x01) {
- goto not_wide;
- }
- if (mbuf[1] != 0x02) {
- goto not_wide;
- }
- if (mbuf[2] != 0x03) {
- goto not_wide;
- }
- if (mbuf[3] != 0x01) {
- goto not_wide;
- }
- m = 1;
- m = m << i;
- dev->wide_id[0] |= m;
-not_wide:
- if ((dev->id[0][i].devtype == 0x00) || (dev->id[0][i].devtype == 0x07) || ((dev->id[0][i].devtype == 0x05) && ((n & 0x10) != 0))) {
- m = 1;
- m = m << i;
- if ((dev->async[0] & m) != 0) {
- goto set_sync;
- }
- }
- continue;
-set_sync:
- if (dev->sp[0][i] == 0x02) {
- synu[4] = 0x0c;
- synuw[4] = 0x0c;
- } else {
- if (dev->sp[0][i] >= 0x03) {
- synu[4] = 0x0a;
- synuw[4] = 0x0a;
- }
- }
- tmport = wkport + 0x5b;
- j = 0;
- if ((m & dev->wide_id[0]) != 0) {
- j |= 0x01;
- }
- outb(j, tmport);
- tmport = wkport + 0x43;
- outb(satn[0], tmport++);
- outb(satn[1], tmport++);
- outb(satn[2], tmport++);
- outb(satn[3], tmport++);
- outb(satn[4], tmport++);
- outb(satn[5], tmport++);
- tmport += 0x06;
- outb(0, tmport);
- tmport += 0x02;
- outb(dev->id[0][i].devsp, tmport++);
- outb(0, tmport++);
- outb(satn[6], tmport++);
- outb(satn[7], tmport++);
- tmport += 0x03;
- outb(satn[8], tmport);
- tmport += 0x07;
-
- while ((inb(tmport) & 0x80) == 0x00)
- cpu_relax();
-
- tmport -= 0x08;
- if ((inb(tmport) != 0x11) && (inb(tmport) != 0x8e)) {
- continue;
- }
- while (inb(tmport) != 0x8e)
- cpu_relax();
-
-try_sync:
- j = 0;
- tmport = wkport + 0x54;
- outb(0x06, tmport);
- tmport += 0x04;
- outb(0x20, tmport);
- tmport += 0x07;
-
- while ((inb(tmport) & 0x80) == 0) {
- if ((inb(tmport) & 0x01) != 0) {
- tmport -= 0x06;
- if ((m & dev->wide_id[0]) != 0) {
- if ((m & dev->ultra_map[0]) != 0) {
- outb(synuw[j++], tmport);
- } else {
- outb(synw[j++], tmport);
- }
- } else {
- if ((m & dev->ultra_map[0]) != 0) {
- outb(synu[j++], tmport);
- } else {
- outb(synn[j++], tmport);
- }
- }
- tmport += 0x06;
- }
- }
- tmport -= 0x08;
-
- while ((inb(tmport) & 0x80) == 0x00)
- cpu_relax();
-
- j = inb(tmport) & 0x0f;
- if (j == 0x0f) {
- goto phase_ins;
- }
- if (j == 0x0a) {
- goto phase_cmds;
- }
- if (j == 0x0e) {
- goto try_sync;
- }
- continue;
-phase_outs:
- tmport = wkport + 0x58;
- outb(0x20, tmport);
- tmport += 0x07;
- while ((inb(tmport) & 0x80) == 0x00) {
- if ((inb(tmport) & 0x01) != 0x00) {
- tmport -= 0x06;
- outb(0x00, tmport);
- tmport += 0x06;
- }
- }
- tmport -= 0x08;
- j = inb(tmport);
- if (j == 0x85) {
- goto tar_dcons;
- }
- j &= 0x0f;
- if (j == 0x0f) {
- goto phase_ins;
- }
- if (j == 0x0a) {
- goto phase_cmds;
- }
- if (j == 0x0e) {
- goto phase_outs;
- }
- continue;
-phase_ins:
- tmport = wkport + 0x54;
- outb(0x06, tmport);
- tmport += 0x04;
- outb(0x20, tmport);
- tmport += 0x07;
- k = 0;
-phase_ins1:
- j = inb(tmport);
- if ((j & 0x01) != 0x00) {
- tmport -= 0x06;
- mbuf[k++] = inb(tmport);
- tmport += 0x06;
- goto phase_ins1;
- }
- if ((j & 0x80) == 0x00) {
- goto phase_ins1;
- }
- tmport -= 0x08;
-
- while ((inb(tmport) & 0x80) == 0x00)
- cpu_relax();
-
- j = inb(tmport);
- if (j == 0x85) {
- goto tar_dcons;
- }
- j &= 0x0f;
- if (j == 0x0f) {
- goto phase_ins;
- }
- if (j == 0x0a) {
- goto phase_cmds;
- }
- if (j == 0x0e) {
- goto phase_outs;
- }
- continue;
-phase_cmds:
- tmport = wkport + 0x50;
- outb(0x30, tmport);
-tar_dcons:
- tmport = wkport + 0x54;
- outb(0x00, tmport);
- tmport += 0x04;
- outb(0x08, tmport);
- tmport += 0x07;
-
- while ((inb(tmport) & 0x80) == 0x00)
- cpu_relax();
-
- tmport -= 0x08;
- j = inb(tmport);
- if (j != 0x16) {
- continue;
- }
- if (mbuf[0] != 0x01) {
- continue;
- }
- if (mbuf[1] != 0x03) {
- continue;
- }
- if (mbuf[4] == 0x00) {
- continue;
- }
- if (mbuf[3] > 0x64) {
- continue;
- }
- if (mbuf[4] > 0x0e) {
- mbuf[4] = 0x0e;
- }
- dev->id[0][i].devsp = mbuf[4];
- if (mbuf[3] < 0x0c) {
- j = 0xb0;
- goto set_syn_ok;
- }
- if ((mbuf[3] < 0x0d) && (rmb == 0)) {
- j = 0xa0;
- goto set_syn_ok;
- }
- if (mbuf[3] < 0x1a) {
- j = 0x20;
- goto set_syn_ok;
- }
- if (mbuf[3] < 0x33) {
- j = 0x40;
- goto set_syn_ok;
- }
- if (mbuf[3] < 0x4c) {
- j = 0x50;
- goto set_syn_ok;
- }
- j = 0x60;
-set_syn_ok:
- dev->id[0][i].devsp = (dev->id[0][i].devsp & 0x0f) | j;
}
}
@@ -2560,491 +1237,345 @@ static int atp870u_init_tables(struct Scsi_Host *host)
return 0;
}
-/* return non-zero on detection */
-static int atp870u_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+static void atp_set_host_id(struct atp_unit *atp, u8 c, u8 host_id)
{
- unsigned char k, m, c;
- unsigned long flags;
- unsigned int base_io, tmport, error,n;
- unsigned char host_id;
- struct Scsi_Host *shpnt = NULL;
- struct atp_unit *atpdev, *p;
- unsigned char setupdata[2][16];
- int count = 0;
+ atp_writeb_io(atp, c, 0, host_id | 0x08);
+ atp_writeb_io(atp, c, 0x18, 0);
+ while ((atp_readb_io(atp, c, 0x1f) & 0x80) == 0)
+ mdelay(1);
+ atp_readb_io(atp, c, 0x17);
+ atp_writeb_io(atp, c, 1, 8);
+ atp_writeb_io(atp, c, 2, 0x7f);
+ atp_writeb_io(atp, c, 0x11, 0x20);
+}
- atpdev = kzalloc(sizeof(*atpdev), GFP_KERNEL);
- if (!atpdev)
- return -ENOMEM;
+static void atp870_init(struct Scsi_Host *shpnt)
+{
+ struct atp_unit *atpdev = shost_priv(shpnt);
+ struct pci_dev *pdev = atpdev->pdev;
+ unsigned char k, host_id;
+ u8 scam_on;
+ bool wide_chip =
+ (pdev->device == PCI_DEVICE_ID_ARTOP_AEC7610 &&
+ pdev->revision == 4) ||
+ (pdev->device == PCI_DEVICE_ID_ARTOP_AEC7612UW) ||
+ (pdev->device == PCI_DEVICE_ID_ARTOP_AEC7612SUW);
+
+ pci_read_config_byte(pdev, 0x49, &host_id);
+
+ dev_info(&pdev->dev, "ACARD AEC-671X PCI Ultra/W SCSI-2/3 Host Adapter: IO:%lx, IRQ:%d.\n",
+ shpnt->io_port, shpnt->irq);
+
+ atpdev->ioport[0] = shpnt->io_port;
+ atpdev->pciport[0] = shpnt->io_port + 0x20;
+ host_id &= 0x07;
+ atpdev->host_id[0] = host_id;
+ scam_on = atp_readb_pci(atpdev, 0, 2);
+ atpdev->global_map[0] = atp_readb_base(atpdev, 0x2d);
+ atpdev->ultra_map[0] = atp_readw_base(atpdev, 0x2e);
+
+ if (atpdev->ultra_map[0] == 0) {
+ scam_on = 0x00;
+ atpdev->global_map[0] = 0x20;
+ atpdev->ultra_map[0] = 0xffff;
+ }
- if (pci_enable_device(pdev))
- goto err_eio;
+ if (pdev->revision > 0x07) /* check if atp876 chip */
+ atp_writeb_base(atpdev, 0x3e, 0x00); /* enable terminator */
+
+ k = (atp_readb_base(atpdev, 0x3a) & 0xf3) | 0x10;
+ atp_writeb_base(atpdev, 0x3a, k);
+ atp_writeb_base(atpdev, 0x3a, k & 0xdf);
+ mdelay(32);
+ atp_writeb_base(atpdev, 0x3a, k);
+ mdelay(32);
+ atp_set_host_id(atpdev, 0, host_id);
+
+ tscam(shpnt, wide_chip, scam_on);
+ atp_writeb_base(atpdev, 0x3a, atp_readb_base(atpdev, 0x3a) | 0x10);
+ atp_is(atpdev, 0, wide_chip, 0);
+ atp_writeb_base(atpdev, 0x3a, atp_readb_base(atpdev, 0x3a) & 0xef);
+ atp_writeb_base(atpdev, 0x3b, atp_readb_base(atpdev, 0x3b) | 0x20);
+ shpnt->max_id = wide_chip ? 16 : 8;
+ shpnt->this_id = host_id;
+}
- if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
- printk(KERN_INFO "atp870u: use 32bit DMA mask.\n");
- } else {
- printk(KERN_ERR "atp870u: DMA mask required but not available.\n");
- goto err_eio;
- }
+static void atp880_init(struct Scsi_Host *shpnt)
+{
+ struct atp_unit *atpdev = shost_priv(shpnt);
+ struct pci_dev *pdev = atpdev->pdev;
+ unsigned char k, m, host_id;
+ unsigned int n;
- /*
- * It's probably easier to weed out some revisions like
- * this than via the PCI device table
- */
- if (ent->device == PCI_DEVICE_ID_ARTOP_AEC7610) {
- atpdev->chip_ver = pdev->revision;
- if (atpdev->chip_ver < 2)
- goto err_eio;
- }
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80);
- switch (ent->device) {
- case PCI_DEVICE_ID_ARTOP_AEC7612UW:
- case PCI_DEVICE_ID_ARTOP_AEC7612SUW:
- case ATP880_DEVID1:
- case ATP880_DEVID2:
- case ATP885_DEVID:
- atpdev->chip_ver = 0x04;
- default:
- break;
- }
- base_io = pci_resource_start(pdev, 0);
- base_io &= 0xfffffff8;
-
- if ((ent->device == ATP880_DEVID1)||(ent->device == ATP880_DEVID2)) {
- atpdev->chip_ver = pdev->revision;
- pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80);//JCC082803
-
- host_id = inb(base_io + 0x39);
- host_id >>= 0x04;
-
- printk(KERN_INFO " ACARD AEC-67160 PCI Ultra3 LVD Host Adapter: %d"
- " IO:%x, IRQ:%d.\n", count, base_io, pdev->irq);
- atpdev->ioport[0] = base_io + 0x40;
- atpdev->pciport[0] = base_io + 0x28;
- atpdev->dev_id = ent->device;
- atpdev->host_id[0] = host_id;
-
- tmport = base_io + 0x22;
- atpdev->scam_on = inb(tmport);
- tmport += 0x13;
- atpdev->global_map[0] = inb(tmport);
- tmport += 0x07;
- atpdev->ultra_map[0] = inw(tmport);
-
- n = 0x3f09;
-next_fblk_880:
- if (n >= 0x4000)
- goto flash_ok_880;
+ atpdev->ioport[0] = shpnt->io_port + 0x40;
+ atpdev->pciport[0] = shpnt->io_port + 0x28;
+
+ host_id = atp_readb_base(atpdev, 0x39) >> 4;
+ dev_info(&pdev->dev, "ACARD AEC-67160 PCI Ultra3 LVD Host Adapter: IO:%lx, IRQ:%d.\n",
+ shpnt->io_port, shpnt->irq);
+ atpdev->host_id[0] = host_id;
+
+ atpdev->global_map[0] = atp_readb_base(atpdev, 0x35);
+ atpdev->ultra_map[0] = atp_readw_base(atpdev, 0x3c);
+
+ n = 0x3f09;
+ while (n < 0x4000) {
m = 0;
- outw(n, base_io + 0x34);
+ atp_writew_base(atpdev, 0x34, n);
n += 0x0002;
- if (inb(base_io + 0x30) == 0xff)
- goto flash_ok_880;
-
- atpdev->sp[0][m++] = inb(base_io + 0x30);
- atpdev->sp[0][m++] = inb(base_io + 0x31);
- atpdev->sp[0][m++] = inb(base_io + 0x32);
- atpdev->sp[0][m++] = inb(base_io + 0x33);
- outw(n, base_io + 0x34);
+ if (atp_readb_base(atpdev, 0x30) == 0xff)
+ break;
+
+ atpdev->sp[0][m++] = atp_readb_base(atpdev, 0x30);
+ atpdev->sp[0][m++] = atp_readb_base(atpdev, 0x31);
+ atpdev->sp[0][m++] = atp_readb_base(atpdev, 0x32);
+ atpdev->sp[0][m++] = atp_readb_base(atpdev, 0x33);
+ atp_writew_base(atpdev, 0x34, n);
n += 0x0002;
- atpdev->sp[0][m++] = inb(base_io + 0x30);
- atpdev->sp[0][m++] = inb(base_io + 0x31);
- atpdev->sp[0][m++] = inb(base_io + 0x32);
- atpdev->sp[0][m++] = inb(base_io + 0x33);
- outw(n, base_io + 0x34);
+ atpdev->sp[0][m++] = atp_readb_base(atpdev, 0x30);
+ atpdev->sp[0][m++] = atp_readb_base(atpdev, 0x31);
+ atpdev->sp[0][m++] = atp_readb_base(atpdev, 0x32);
+ atpdev->sp[0][m++] = atp_readb_base(atpdev, 0x33);
+ atp_writew_base(atpdev, 0x34, n);
n += 0x0002;
- atpdev->sp[0][m++] = inb(base_io + 0x30);
- atpdev->sp[0][m++] = inb(base_io + 0x31);
- atpdev->sp[0][m++] = inb(base_io + 0x32);
- atpdev->sp[0][m++] = inb(base_io + 0x33);
- outw(n, base_io + 0x34);
+ atpdev->sp[0][m++] = atp_readb_base(atpdev, 0x30);
+ atpdev->sp[0][m++] = atp_readb_base(atpdev, 0x31);
+ atpdev->sp[0][m++] = atp_readb_base(atpdev, 0x32);
+ atpdev->sp[0][m++] = atp_readb_base(atpdev, 0x33);
+ atp_writew_base(atpdev, 0x34, n);
n += 0x0002;
- atpdev->sp[0][m++] = inb(base_io + 0x30);
- atpdev->sp[0][m++] = inb(base_io + 0x31);
- atpdev->sp[0][m++] = inb(base_io + 0x32);
- atpdev->sp[0][m++] = inb(base_io + 0x33);
+ atpdev->sp[0][m++] = atp_readb_base(atpdev, 0x30);
+ atpdev->sp[0][m++] = atp_readb_base(atpdev, 0x31);
+ atpdev->sp[0][m++] = atp_readb_base(atpdev, 0x32);
+ atpdev->sp[0][m++] = atp_readb_base(atpdev, 0x33);
n += 0x0018;
- goto next_fblk_880;
-flash_ok_880:
- outw(0, base_io + 0x34);
- atpdev->ultra_map[0] = 0;
- atpdev->async[0] = 0;
+ }
+ atp_writew_base(atpdev, 0x34, 0);
+ atpdev->ultra_map[0] = 0;
+ atpdev->async[0] = 0;
+ for (k = 0; k < 16; k++) {
+ n = 1 << k;
+ if (atpdev->sp[0][k] > 1)
+ atpdev->ultra_map[0] |= n;
+ else
+ if (atpdev->sp[0][k] == 0)
+ atpdev->async[0] |= n;
+ }
+ atpdev->async[0] = ~(atpdev->async[0]);
+ atp_writeb_base(atpdev, 0x35, atpdev->global_map[0]);
+
+ k = atp_readb_base(atpdev, 0x38) & 0x80;
+ atp_writeb_base(atpdev, 0x38, k);
+ atp_writeb_base(atpdev, 0x3b, 0x20);
+ mdelay(32);
+ atp_writeb_base(atpdev, 0x3b, 0);
+ mdelay(32);
+ atp_readb_io(atpdev, 0, 0x1b);
+ atp_readb_io(atpdev, 0, 0x17);
+
+ atp_set_host_id(atpdev, 0, host_id);
+
+ tscam(shpnt, true, atp_readb_base(atpdev, 0x22));
+ atp_is(atpdev, 0, true, atp_readb_base(atpdev, 0x3f) & 0x40);
+ atp_writeb_base(atpdev, 0x38, 0xb0);
+ shpnt->max_id = 16;
+ shpnt->this_id = host_id;
+}
+
+static void atp885_init(struct Scsi_Host *shpnt)
+{
+ struct atp_unit *atpdev = shost_priv(shpnt);
+ struct pci_dev *pdev = atpdev->pdev;
+ unsigned char k, m, c;
+ unsigned int n;
+ unsigned char setupdata[2][16];
+
+ dev_info(&pdev->dev, "ACARD AEC-67162 PCI Ultra3 LVD Host Adapter: IO:%lx, IRQ:%d.\n",
+ shpnt->io_port, shpnt->irq);
+
+ atpdev->ioport[0] = shpnt->io_port + 0x80;
+ atpdev->ioport[1] = shpnt->io_port + 0xc0;
+ atpdev->pciport[0] = shpnt->io_port + 0x40;
+ atpdev->pciport[1] = shpnt->io_port + 0x50;
+
+ c = atp_readb_base(atpdev, 0x29);
+ atp_writeb_base(atpdev, 0x29, c | 0x04);
+
+ n = 0x1f80;
+ while (n < 0x2000) {
+ atp_writew_base(atpdev, 0x3c, n);
+ if (atp_readl_base(atpdev, 0x38) == 0xffffffff)
+ break;
+ for (m = 0; m < 2; m++) {
+ atpdev->global_map[m] = 0;
+ for (k = 0; k < 4; k++) {
+ atp_writew_base(atpdev, 0x3c, n++);
+ ((unsigned long *)&setupdata[m][0])[k] = atp_readl_base(atpdev, 0x38);
+ }
+ for (k = 0; k < 4; k++) {
+ atp_writew_base(atpdev, 0x3c, n++);
+ ((unsigned long *)&atpdev->sp[m][0])[k] = atp_readl_base(atpdev, 0x38);
+ }
+ n += 8;
+ }
+ }
+ c = atp_readb_base(atpdev, 0x29);
+ atp_writeb_base(atpdev, 0x29, c & 0xfb);
+ for (c = 0; c < 2; c++) {
+ atpdev->ultra_map[c] = 0;
+ atpdev->async[c] = 0;
for (k = 0; k < 16; k++) {
- n = 1;
- n = n << k;
- if (atpdev->sp[0][k] > 1) {
- atpdev->ultra_map[0] |= n;
- } else {
- if (atpdev->sp[0][k] == 0)
- atpdev->async[0] |= n;
- }
- }
- atpdev->async[0] = ~(atpdev->async[0]);
- outb(atpdev->global_map[0], base_io + 0x35);
-
- shpnt = scsi_host_alloc(&atp870u_template, sizeof(struct atp_unit));
- if (!shpnt)
- goto err_nomem;
-
- p = (struct atp_unit *)&shpnt->hostdata;
-
- atpdev->host = shpnt;
- atpdev->pdev = pdev;
- pci_set_drvdata(pdev, p);
- memcpy(p, atpdev, sizeof(*atpdev));
- if (atp870u_init_tables(shpnt) < 0) {
- printk(KERN_ERR "Unable to allocate tables for Acard controller\n");
- goto unregister;
- }
-
- if (request_irq(pdev->irq, atp870u_intr_handle, IRQF_SHARED, "atp880i", shpnt)) {
- printk(KERN_ERR "Unable to allocate IRQ%d for Acard controller.\n", pdev->irq);
- goto free_tables;
- }
-
- spin_lock_irqsave(shpnt->host_lock, flags);
- tmport = base_io + 0x38;
- k = inb(tmport) & 0x80;
- outb(k, tmport);
- tmport += 0x03;
- outb(0x20, tmport);
- mdelay(32);
- outb(0, tmport);
- mdelay(32);
- tmport = base_io + 0x5b;
- inb(tmport);
- tmport -= 0x04;
- inb(tmport);
- tmport = base_io + 0x40;
- outb((host_id | 0x08), tmport);
- tmport += 0x18;
- outb(0, tmport);
- tmport += 0x07;
- while ((inb(tmport) & 0x80) == 0)
- mdelay(1);
- tmport -= 0x08;
- inb(tmport);
- tmport = base_io + 0x41;
- outb(8, tmport++);
- outb(0x7f, tmport);
- tmport = base_io + 0x51;
- outb(0x20, tmport);
-
- tscam(shpnt);
- is880(p, base_io);
- tmport = base_io + 0x38;
- outb(0xb0, tmport);
- shpnt->max_id = 16;
- shpnt->this_id = host_id;
- shpnt->unique_id = base_io;
- shpnt->io_port = base_io;
- shpnt->n_io_port = 0x60; /* Number of bytes of I/O space used */
- shpnt->irq = pdev->irq;
- } else if (ent->device == ATP885_DEVID) {
- printk(KERN_INFO " ACARD AEC-67162 PCI Ultra3 LVD Host Adapter: IO:%x, IRQ:%d.\n"
- , base_io, pdev->irq);
-
- atpdev->pdev = pdev;
- atpdev->dev_id = ent->device;
- atpdev->baseport = base_io;
- atpdev->ioport[0] = base_io + 0x80;
- atpdev->ioport[1] = base_io + 0xc0;
- atpdev->pciport[0] = base_io + 0x40;
- atpdev->pciport[1] = base_io + 0x50;
-
- shpnt = scsi_host_alloc(&atp870u_template, sizeof(struct atp_unit));
- if (!shpnt)
- goto err_nomem;
-
- p = (struct atp_unit *)&shpnt->hostdata;
-
- atpdev->host = shpnt;
- atpdev->pdev = pdev;
- pci_set_drvdata(pdev, p);
- memcpy(p, atpdev, sizeof(struct atp_unit));
- if (atp870u_init_tables(shpnt) < 0)
- goto unregister;
-
-#ifdef ED_DBGP
- printk("request_irq() shpnt %p hostdata %p\n", shpnt, p);
-#endif
- if (request_irq(pdev->irq, atp870u_intr_handle, IRQF_SHARED, "atp870u", shpnt)) {
- printk(KERN_ERR "Unable to allocate IRQ for Acard controller.\n");
- goto free_tables;
+ n = 1 << k;
+ if (atpdev->sp[c][k] > 1)
+ atpdev->ultra_map[c] |= n;
+ else
+ if (atpdev->sp[c][k] == 0)
+ atpdev->async[c] |= n;
+ }
+ atpdev->async[c] = ~(atpdev->async[c]);
+
+ if (atpdev->global_map[c] == 0) {
+ k = setupdata[c][1];
+ if ((k & 0x40) != 0)
+ atpdev->global_map[c] |= 0x20;
+ k &= 0x07;
+ atpdev->global_map[c] |= k;
+ if ((setupdata[c][2] & 0x04) != 0)
+ atpdev->global_map[c] |= 0x08;
+ atpdev->host_id[c] = setupdata[c][0] & 0x07;
}
-
- spin_lock_irqsave(shpnt->host_lock, flags);
-
- c=inb(base_io + 0x29);
- outb((c | 0x04),base_io + 0x29);
-
- n=0x1f80;
-next_fblk_885:
- if (n >= 0x2000) {
- goto flash_ok_885;
- }
- outw(n,base_io + 0x3c);
- if (inl(base_io + 0x38) == 0xffffffff) {
- goto flash_ok_885;
- }
- for (m=0; m < 2; m++) {
- p->global_map[m]= 0;
- for (k=0; k < 4; k++) {
- outw(n++,base_io + 0x3c);
- ((unsigned long *)&setupdata[m][0])[k]=inl(base_io + 0x38);
- }
- for (k=0; k < 4; k++) {
- outw(n++,base_io + 0x3c);
- ((unsigned long *)&p->sp[m][0])[k]=inl(base_io + 0x38);
- }
- n += 8;
- }
- goto next_fblk_885;
-flash_ok_885:
-#ifdef ED_DBGP
- printk( "Flash Read OK\n");
-#endif
- c=inb(base_io + 0x29);
- outb((c & 0xfb),base_io + 0x29);
- for (c=0;c < 2;c++) {
- p->ultra_map[c]=0;
- p->async[c] = 0;
- for (k=0; k < 16; k++) {
- n=1;
- n = n << k;
- if (p->sp[c][k] > 1) {
- p->ultra_map[c] |= n;
- } else {
- if (p->sp[c][k] == 0) {
- p->async[c] |= n;
- }
- }
- }
- p->async[c] = ~(p->async[c]);
-
- if (p->global_map[c] == 0) {
- k=setupdata[c][1];
- if ((k & 0x40) != 0)
- p->global_map[c] |= 0x20;
- k &= 0x07;
- p->global_map[c] |= k;
- if ((setupdata[c][2] & 0x04) != 0)
- p->global_map[c] |= 0x08;
- p->host_id[c] = setupdata[c][0] & 0x07;
- }
- }
-
- k = inb(base_io + 0x28) & 0x8f;
- k |= 0x10;
- outb(k, base_io + 0x28);
- outb(0x80, base_io + 0x41);
- outb(0x80, base_io + 0x51);
- mdelay(100);
- outb(0, base_io + 0x41);
- outb(0, base_io + 0x51);
- mdelay(1000);
- inb(base_io + 0x9b);
- inb(base_io + 0x97);
- inb(base_io + 0xdb);
- inb(base_io + 0xd7);
- tmport = base_io + 0x80;
- k=p->host_id[0];
- if (k > 7)
- k = (k & 0x07) | 0x40;
- k |= 0x08;
- outb(k, tmport);
- tmport += 0x18;
- outb(0, tmport);
- tmport += 0x07;
-
- while ((inb(tmport) & 0x80) == 0)
- cpu_relax();
-
- tmport -= 0x08;
- inb(tmport);
- tmport = base_io + 0x81;
- outb(8, tmport++);
- outb(0x7f, tmport);
- tmport = base_io + 0x91;
- outb(0x20, tmport);
-
- tmport = base_io + 0xc0;
- k=p->host_id[1];
- if (k > 7)
- k = (k & 0x07) | 0x40;
- k |= 0x08;
- outb(k, tmport);
- tmport += 0x18;
- outb(0, tmport);
- tmport += 0x07;
-
- while ((inb(tmport) & 0x80) == 0)
- cpu_relax();
+ }
- tmport -= 0x08;
- inb(tmport);
- tmport = base_io + 0xc1;
- outb(8, tmport++);
- outb(0x7f, tmport);
- tmport = base_io + 0xd1;
- outb(0x20, tmport);
-
- tscam_885();
- printk(KERN_INFO " Scanning Channel A SCSI Device ...\n");
- is885(p, base_io + 0x80, 0);
- printk(KERN_INFO " Scanning Channel B SCSI Device ...\n");
- is885(p, base_io + 0xc0, 1);
-
- k = inb(base_io + 0x28) & 0xcf;
- k |= 0xc0;
- outb(k, base_io + 0x28);
- k = inb(base_io + 0x1f) | 0x80;
- outb(k, base_io + 0x1f);
- k = inb(base_io + 0x29) | 0x01;
- outb(k, base_io + 0x29);
-#ifdef ED_DBGP
- //printk("atp885: atp_host[0] 0x%p\n", atp_host[0]);
-#endif
- shpnt->max_id = 16;
- shpnt->max_lun = (p->global_map[0] & 0x07) + 1;
- shpnt->max_channel = 1;
- shpnt->this_id = p->host_id[0];
- shpnt->unique_id = base_io;
- shpnt->io_port = base_io;
- shpnt->n_io_port = 0xff; /* Number of bytes of I/O space used */
- shpnt->irq = pdev->irq;
-
- } else {
- error = pci_read_config_byte(pdev, 0x49, &host_id);
+ k = atp_readb_base(atpdev, 0x28) & 0x8f;
+ k |= 0x10;
+ atp_writeb_base(atpdev, 0x28, k);
+ atp_writeb_pci(atpdev, 0, 1, 0x80);
+ atp_writeb_pci(atpdev, 1, 1, 0x80);
+ mdelay(100);
+ atp_writeb_pci(atpdev, 0, 1, 0);
+ atp_writeb_pci(atpdev, 1, 1, 0);
+ mdelay(1000);
+ atp_readb_io(atpdev, 0, 0x1b);
+ atp_readb_io(atpdev, 0, 0x17);
+ atp_readb_io(atpdev, 1, 0x1b);
+ atp_readb_io(atpdev, 1, 0x17);
+
+ k = atpdev->host_id[0];
+ if (k > 7)
+ k = (k & 0x07) | 0x40;
+ atp_set_host_id(atpdev, 0, k);
+
+ k = atpdev->host_id[1];
+ if (k > 7)
+ k = (k & 0x07) | 0x40;
+ atp_set_host_id(atpdev, 1, k);
+
+ mdelay(600); /* this delay used to be called tscam_885() */
+ dev_info(&pdev->dev, "Scanning Channel A SCSI Device ...\n");
+ atp_is(atpdev, 0, true, atp_readb_io(atpdev, 0, 0x1b) >> 7);
+ atp_writeb_io(atpdev, 0, 0x16, 0x80);
+ dev_info(&pdev->dev, "Scanning Channel B SCSI Device ...\n");
+ atp_is(atpdev, 1, true, atp_readb_io(atpdev, 1, 0x1b) >> 7);
+ atp_writeb_io(atpdev, 1, 0x16, 0x80);
+ k = atp_readb_base(atpdev, 0x28) & 0xcf;
+ k |= 0xc0;
+ atp_writeb_base(atpdev, 0x28, k);
+ k = atp_readb_base(atpdev, 0x1f) | 0x80;
+ atp_writeb_base(atpdev, 0x1f, k);
+ k = atp_readb_base(atpdev, 0x29) | 0x01;
+ atp_writeb_base(atpdev, 0x29, k);
+ shpnt->max_id = 16;
+ shpnt->max_lun = (atpdev->global_map[0] & 0x07) + 1;
+ shpnt->max_channel = 1;
+ shpnt->this_id = atpdev->host_id[0];
+}
- printk(KERN_INFO " ACARD AEC-671X PCI Ultra/W SCSI-2/3 Host Adapter: %d "
- "IO:%x, IRQ:%d.\n", count, base_io, pdev->irq);
+/* return non-zero on detection */
+static int atp870u_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ struct Scsi_Host *shpnt = NULL;
+ struct atp_unit *atpdev;
+ int err;
- atpdev->ioport[0] = base_io;
- atpdev->pciport[0] = base_io + 0x20;
- atpdev->dev_id = ent->device;
- host_id &= 0x07;
- atpdev->host_id[0] = host_id;
- tmport = base_io + 0x22;
- atpdev->scam_on = inb(tmport);
- tmport += 0x0b;
- atpdev->global_map[0] = inb(tmport++);
- atpdev->ultra_map[0] = inw(tmport);
+ if (ent->device == PCI_DEVICE_ID_ARTOP_AEC7610 && pdev->revision < 2) {
+ dev_err(&pdev->dev, "ATP850S chips (AEC6710L/F cards) are not supported.\n");
+ return -ENODEV;
+ }
- if (atpdev->ultra_map[0] == 0) {
- atpdev->scam_on = 0x00;
- atpdev->global_map[0] = 0x20;
- atpdev->ultra_map[0] = 0xffff;
- }
+ err = pci_enable_device(pdev);
+ if (err)
+ goto fail;
- shpnt = scsi_host_alloc(&atp870u_template, sizeof(struct atp_unit));
- if (!shpnt)
- goto err_nomem;
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
+ printk(KERN_ERR "atp870u: DMA mask required but not available.\n");
+ err = -EIO;
+ goto disable_device;
+ }
- p = (struct atp_unit *)&shpnt->hostdata;
-
- atpdev->host = shpnt;
- atpdev->pdev = pdev;
- pci_set_drvdata(pdev, p);
- memcpy(p, atpdev, sizeof(*atpdev));
- if (atp870u_init_tables(shpnt) < 0)
- goto unregister;
-
- if (request_irq(pdev->irq, atp870u_intr_handle, IRQF_SHARED, "atp870i", shpnt)) {
- printk(KERN_ERR "Unable to allocate IRQ%d for Acard controller.\n", pdev->irq);
- goto free_tables;
- }
-
- spin_lock_irqsave(shpnt->host_lock, flags);
- if (atpdev->chip_ver > 0x07) { /* check if atp876 chip then enable terminator */
- tmport = base_io + 0x3e;
- outb(0x00, tmport);
- }
-
- tmport = base_io + 0x3a;
- k = (inb(tmport) & 0xf3) | 0x10;
- outb(k, tmport);
- outb((k & 0xdf), tmport);
- mdelay(32);
- outb(k, tmport);
- mdelay(32);
- tmport = base_io;
- outb((host_id | 0x08), tmport);
- tmport += 0x18;
- outb(0, tmport);
- tmport += 0x07;
- while ((inb(tmport) & 0x80) == 0)
- mdelay(1);
-
- tmport -= 0x08;
- inb(tmport);
- tmport = base_io + 1;
- outb(8, tmport++);
- outb(0x7f, tmport);
- tmport = base_io + 0x11;
- outb(0x20, tmport);
-
- tscam(shpnt);
- is870(p, base_io);
- tmport = base_io + 0x3a;
- outb((inb(tmport) & 0xef), tmport);
- tmport++;
- outb((inb(tmport) | 0x20), tmport);
- if (atpdev->chip_ver == 4)
- shpnt->max_id = 16;
- else
- shpnt->max_id = 8;
- shpnt->this_id = host_id;
- shpnt->unique_id = base_io;
- shpnt->io_port = base_io;
- shpnt->n_io_port = 0x40; /* Number of bytes of I/O space used */
- shpnt->irq = pdev->irq;
- }
- spin_unlock_irqrestore(shpnt->host_lock, flags);
- if(ent->device==ATP885_DEVID) {
- if(!request_region(base_io, 0xff, "atp870u")) /* Register the IO ports that we use */
- goto request_io_fail;
- } else if((ent->device==ATP880_DEVID1)||(ent->device==ATP880_DEVID2)) {
- if(!request_region(base_io, 0x60, "atp870u")) /* Register the IO ports that we use */
- goto request_io_fail;
- } else {
- if(!request_region(base_io, 0x40, "atp870u")) /* Register the IO ports that we use */
- goto request_io_fail;
- }
- count++;
- if (scsi_add_host(shpnt, &pdev->dev))
- goto scsi_add_fail;
- scsi_scan_host(shpnt);
-#ifdef ED_DBGP
- printk("atp870u_prob : exit\n");
-#endif
- return 0;
+ err = pci_request_regions(pdev, "atp870u");
+ if (err)
+ goto disable_device;
+ pci_set_master(pdev);
+
+ err = -ENOMEM;
+ shpnt = scsi_host_alloc(&atp870u_template, sizeof(struct atp_unit));
+ if (!shpnt)
+ goto release_region;
+
+ atpdev = shost_priv(shpnt);
+
+ atpdev->host = shpnt;
+ atpdev->pdev = pdev;
+ pci_set_drvdata(pdev, atpdev);
+
+ shpnt->io_port = pci_resource_start(pdev, 0);
+ shpnt->io_port &= 0xfffffff8;
+ shpnt->n_io_port = pci_resource_len(pdev, 0);
+ atpdev->baseport = shpnt->io_port;
+ shpnt->unique_id = shpnt->io_port;
+ shpnt->irq = pdev->irq;
+
+ err = atp870u_init_tables(shpnt);
+ if (err) {
+ dev_err(&pdev->dev, "Unable to allocate tables for Acard controller\n");
+ goto unregister;
+ }
-scsi_add_fail:
- printk("atp870u_prob:scsi_add_fail\n");
- if(ent->device==ATP885_DEVID) {
- release_region(base_io, 0xff);
- } else if((ent->device==ATP880_DEVID1)||(ent->device==ATP880_DEVID2)) {
- release_region(base_io, 0x60);
- } else {
- release_region(base_io, 0x40);
+ if (is880(atpdev))
+ atp880_init(shpnt);
+ else if (is885(atpdev))
+ atp885_init(shpnt);
+ else
+ atp870_init(shpnt);
+
+ err = request_irq(shpnt->irq, atp870u_intr_handle, IRQF_SHARED, "atp870u", shpnt);
+ if (err) {
+ dev_err(&pdev->dev, "Unable to allocate IRQ %d.\n", shpnt->irq);
+ goto free_tables;
}
-request_io_fail:
- printk("atp870u_prob:request_io_fail\n");
- free_irq(pdev->irq, shpnt);
+
+ err = scsi_add_host(shpnt, &pdev->dev);
+ if (err)
+ goto scsi_add_fail;
+ scsi_scan_host(shpnt);
+
+ return 0;
+
+scsi_add_fail:
+ free_irq(shpnt->irq, shpnt);
free_tables:
- printk("atp870u_prob:free_table\n");
atp870u_free_tables(shpnt);
unregister:
- printk("atp870u_prob:unregister\n");
scsi_host_put(shpnt);
- return -1;
-err_eio:
- kfree(atpdev);
- return -EIO;
-err_nomem:
- kfree(atpdev);
- return -ENOMEM;
+release_region:
+ pci_release_regions(pdev);
+disable_device:
+ pci_disable_device(pdev);
+fail:
+ return err;
}
/* The abort command does not leave the device in a clean state where
@@ -3055,7 +1586,6 @@ static int atp870u_abort(struct scsi_cmnd * SCpnt)
{
unsigned char j, k, c;
struct scsi_cmnd *workrequ;
- unsigned int tmport;
struct atp_unit *dev;
struct Scsi_Host *host;
host = SCpnt->device->host;
@@ -3065,18 +1595,13 @@ static int atp870u_abort(struct scsi_cmnd * SCpnt)
printk(" atp870u: abort Channel = %x \n", c);
printk("working=%x last_cmd=%x ", dev->working[c], dev->last_cmd[c]);
printk(" quhdu=%x quendu=%x ", dev->quhd[c], dev->quend[c]);
- tmport = dev->ioport[c];
for (j = 0; j < 0x18; j++) {
- printk(" r%2x=%2x", j, inb(tmport++));
+ printk(" r%2x=%2x", j, atp_readb_io(dev, c, j));
}
- tmport += 0x04;
- printk(" r1c=%2x", inb(tmport));
- tmport += 0x03;
- printk(" r1f=%2x in_snd=%2x ", inb(tmport), dev->in_snd[c]);
- tmport= dev->pciport[c];
- printk(" d00=%2x", inb(tmport));
- tmport += 0x02;
- printk(" d02=%2x", inb(tmport));
+ printk(" r1c=%2x", atp_readb_io(dev, c, 0x1c));
+ printk(" r1f=%2x in_snd=%2x ", atp_readb_io(dev, c, 0x1f), dev->in_snd[c]);
+ printk(" d00=%2x", atp_readb_pci(dev, c, 0x00));
+ printk(" d02=%2x", atp_readb_pci(dev, c, 0x02));
for(j=0;j<16;j++) {
if (dev->id[c][j].curr_req != NULL) {
workrequ = dev->id[c][j].curr_req;
@@ -3136,12 +1661,10 @@ static void atp870u_remove (struct pci_dev *pdev)
scsi_remove_host(pshost);
- printk(KERN_INFO "free_irq : %d\n",pshost->irq);
free_irq(pshost->irq, pshost);
- release_region(pshost->io_port, pshost->n_io_port);
- printk(KERN_INFO "atp870u_free_tables : %p\n",pshost);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
atp870u_free_tables(pshost);
- printk(KERN_INFO "scsi_host_put : %p\n",pshost);
scsi_host_put(pshost);
}
MODULE_LICENSE("GPL");
@@ -3185,52 +1708,26 @@ static struct pci_driver atp870u_driver = {
.remove = atp870u_remove,
};
-static int __init atp870u_init(void)
-{
-#ifdef ED_DBGP
- printk("atp870u_init: Entry\n");
-#endif
- return pci_register_driver(&atp870u_driver);
-}
-
-static void __exit atp870u_exit(void)
-{
-#ifdef ED_DBGP
- printk("atp870u_exit: Entry\n");
-#endif
- pci_unregister_driver(&atp870u_driver);
-}
-
-static void tscam_885(void)
-{
- unsigned char i;
-
- for (i = 0; i < 0x2; i++) {
- mdelay(300);
- }
- return;
-}
-
-
+module_pci_driver(atp870u_driver);
-static void is885(struct atp_unit *dev, unsigned int wkport,unsigned char c)
+static void atp_is(struct atp_unit *dev, unsigned char c, bool wide_chip, unsigned char lvdmode)
{
- unsigned int tmport;
- unsigned char i, j, k, rmb, n, lvdmode;
+ unsigned char i, j, k, rmb, n;
unsigned short int m;
static unsigned char mbuf[512];
- static unsigned char satn[9] = {0, 0, 0, 0, 0, 0, 0, 6, 6};
- static unsigned char inqd[9] = {0x12, 0, 0, 0, 0x24, 0, 0, 0x24, 6};
- static unsigned char synn[6] = {0x80, 1, 3, 1, 0x19, 0x0e};
- unsigned char synu[6] = {0x80, 1, 3, 1, 0x0a, 0x0e};
- static unsigned char synw[6] = {0x80, 1, 3, 1, 0x19, 0x0e};
- unsigned char synuw[6] = {0x80, 1, 3, 1, 0x0a, 0x0e};
- static unsigned char wide[6] = {0x80, 1, 2, 3, 1, 0};
- static unsigned char u3[9] = { 0x80,1,6,4,0x09,00,0x0e,0x01,0x02 };
-
- lvdmode=inb(wkport + 0x1b) >> 7;
+ static unsigned char satn[9] = { 0, 0, 0, 0, 0, 0, 0, 6, 6 };
+ static unsigned char inqd[9] = { 0x12, 0, 0, 0, 0x24, 0, 0, 0x24, 6 };
+ static unsigned char synn[6] = { 0x80, 1, 3, 1, 0x19, 0x0e };
+ unsigned char synu[6] = { 0x80, 1, 3, 1, 0x0a, 0x0e };
+ static unsigned char synw[6] = { 0x80, 1, 3, 1, 0x19, 0x0e };
+ static unsigned char synw_870[6] = { 0x80, 1, 3, 1, 0x0c, 0x07 };
+ unsigned char synuw[6] = { 0x80, 1, 3, 1, 0x0a, 0x0e };
+ static unsigned char wide[6] = { 0x80, 1, 2, 3, 1, 0 };
+ static unsigned char u3[9] = { 0x80, 1, 6, 4, 0x09, 00, 0x0e, 0x01, 0x02 };
for (i = 0; i < 16; i++) {
+ if (!wide_chip && (i > 7))
+ break;
m = 1;
m = m << i;
if ((m & dev->active_id[c]) != 0) {
@@ -3240,192 +1737,172 @@ static void is885(struct atp_unit *dev, unsigned int wkport,unsigned char c)
printk(KERN_INFO " ID: %2d Host Adapter\n", dev->host_id[c]);
continue;
}
- tmport = wkport + 0x1b;
- outb(0x01, tmport);
- tmport = wkport + 0x01;
- outb(0x08, tmport++);
- outb(0x7f, tmport++);
- outb(satn[0], tmport++);
- outb(satn[1], tmport++);
- outb(satn[2], tmport++);
- outb(satn[3], tmport++);
- outb(satn[4], tmport++);
- outb(satn[5], tmport++);
- tmport += 0x06;
- outb(0, tmport);
- tmport += 0x02;
- outb(dev->id[c][i].devsp, tmport++);
-
- outb(0, tmport++);
- outb(satn[6], tmport++);
- outb(satn[7], tmport++);
+ atp_writeb_io(dev, c, 0x1b, wide_chip ? 0x01 : 0x00);
+ atp_writeb_io(dev, c, 1, 0x08);
+ atp_writeb_io(dev, c, 2, 0x7f);
+ atp_writeb_io(dev, c, 3, satn[0]);
+ atp_writeb_io(dev, c, 4, satn[1]);
+ atp_writeb_io(dev, c, 5, satn[2]);
+ atp_writeb_io(dev, c, 6, satn[3]);
+ atp_writeb_io(dev, c, 7, satn[4]);
+ atp_writeb_io(dev, c, 8, satn[5]);
+ atp_writeb_io(dev, c, 0x0f, 0);
+ atp_writeb_io(dev, c, 0x11, dev->id[c][i].devsp);
+ atp_writeb_io(dev, c, 0x12, 0);
+ atp_writeb_io(dev, c, 0x13, satn[6]);
+ atp_writeb_io(dev, c, 0x14, satn[7]);
j = i;
if ((j & 0x08) != 0) {
j = (j & 0x07) | 0x40;
}
- outb(j, tmport);
- tmport += 0x03;
- outb(satn[8], tmport);
- tmport += 0x07;
+ atp_writeb_io(dev, c, 0x15, j);
+ atp_writeb_io(dev, c, 0x18, satn[8]);
- while ((inb(tmport) & 0x80) == 0x00)
+ while ((atp_readb_io(dev, c, 0x1f) & 0x80) == 0x00)
cpu_relax();
- tmport -= 0x08;
- if ((inb(tmport) != 0x11) && (inb(tmport) != 0x8e)) {
+
+ if (atp_readb_io(dev, c, 0x17) != 0x11 && atp_readb_io(dev, c, 0x17) != 0x8e)
continue;
- }
- while (inb(tmport) != 0x8e)
+
+ while (atp_readb_io(dev, c, 0x17) != 0x8e)
cpu_relax();
+
dev->active_id[c] |= m;
- tmport = wkport + 0x10;
- outb(0x30, tmport);
- tmport = wkport + 0x14;
- outb(0x00, tmport);
+ atp_writeb_io(dev, c, 0x10, 0x30);
+ if (is885(dev) || is880(dev))
+ atp_writeb_io(dev, c, 0x14, 0x00);
+ else /* result of is870() merge - is this a bug? */
+ atp_writeb_io(dev, c, 0x04, 0x00);
phase_cmd:
- tmport = wkport + 0x18;
- outb(0x08, tmport);
- tmport += 0x07;
- while ((inb(tmport) & 0x80) == 0x00)
+ atp_writeb_io(dev, c, 0x18, 0x08);
+
+ while ((atp_readb_io(dev, c, 0x1f) & 0x80) == 0x00)
cpu_relax();
- tmport -= 0x08;
- j = inb(tmport);
+
+ j = atp_readb_io(dev, c, 0x17);
if (j != 0x16) {
- tmport = wkport + 0x10;
- outb(0x41, tmport);
+ atp_writeb_io(dev, c, 0x10, 0x41);
goto phase_cmd;
}
sel_ok:
- tmport = wkport + 0x03;
- outb(inqd[0], tmport++);
- outb(inqd[1], tmport++);
- outb(inqd[2], tmport++);
- outb(inqd[3], tmport++);
- outb(inqd[4], tmport++);
- outb(inqd[5], tmport);
- tmport += 0x07;
- outb(0, tmport);
- tmport += 0x02;
- outb(dev->id[c][i].devsp, tmport++);
- outb(0, tmport++);
- outb(inqd[6], tmport++);
- outb(inqd[7], tmport++);
- tmport += 0x03;
- outb(inqd[8], tmport);
- tmport += 0x07;
- while ((inb(tmport) & 0x80) == 0x00)
+ atp_writeb_io(dev, c, 3, inqd[0]);
+ atp_writeb_io(dev, c, 4, inqd[1]);
+ atp_writeb_io(dev, c, 5, inqd[2]);
+ atp_writeb_io(dev, c, 6, inqd[3]);
+ atp_writeb_io(dev, c, 7, inqd[4]);
+ atp_writeb_io(dev, c, 8, inqd[5]);
+ atp_writeb_io(dev, c, 0x0f, 0);
+ atp_writeb_io(dev, c, 0x11, dev->id[c][i].devsp);
+ atp_writeb_io(dev, c, 0x12, 0);
+ atp_writeb_io(dev, c, 0x13, inqd[6]);
+ atp_writeb_io(dev, c, 0x14, inqd[7]);
+ atp_writeb_io(dev, c, 0x18, inqd[8]);
+
+ while ((atp_readb_io(dev, c, 0x1f) & 0x80) == 0x00)
cpu_relax();
- tmport -= 0x08;
- if ((inb(tmport) != 0x11) && (inb(tmport) != 0x8e)) {
+
+ if (atp_readb_io(dev, c, 0x17) != 0x11 && atp_readb_io(dev, c, 0x17) != 0x8e)
continue;
- }
- while (inb(tmport) != 0x8e)
+
+ while (atp_readb_io(dev, c, 0x17) != 0x8e)
cpu_relax();
- tmport = wkport + 0x1b;
- outb(0x00, tmport);
- tmport = wkport + 0x18;
- outb(0x08, tmport);
- tmport += 0x07;
+
+ if (wide_chip)
+ atp_writeb_io(dev, c, 0x1b, 0x00);
+
+ atp_writeb_io(dev, c, 0x18, 0x08);
j = 0;
rd_inq_data:
- k = inb(tmport);
+ k = atp_readb_io(dev, c, 0x1f);
if ((k & 0x01) != 0) {
- tmport -= 0x06;
- mbuf[j++] = inb(tmport);
- tmport += 0x06;
+ mbuf[j++] = atp_readb_io(dev, c, 0x19);
goto rd_inq_data;
}
if ((k & 0x80) == 0) {
goto rd_inq_data;
}
- tmport -= 0x08;
- j = inb(tmport);
+ j = atp_readb_io(dev, c, 0x17);
if (j == 0x16) {
goto inq_ok;
}
- tmport = wkport + 0x10;
- outb(0x46, tmport);
- tmport += 0x02;
- outb(0, tmport++);
- outb(0, tmport++);
- outb(0, tmport++);
- tmport += 0x03;
- outb(0x08, tmport);
- tmport += 0x07;
- while ((inb(tmport) & 0x80) == 0x00)
+ atp_writeb_io(dev, c, 0x10, 0x46);
+ atp_writeb_io(dev, c, 0x12, 0);
+ atp_writeb_io(dev, c, 0x13, 0);
+ atp_writeb_io(dev, c, 0x14, 0);
+ atp_writeb_io(dev, c, 0x18, 0x08);
+
+ while ((atp_readb_io(dev, c, 0x1f) & 0x80) == 0x00)
cpu_relax();
- tmport -= 0x08;
- if (inb(tmport) != 0x16) {
+
+ if (atp_readb_io(dev, c, 0x17) != 0x16)
goto sel_ok;
- }
+
inq_ok:
mbuf[36] = 0;
- printk( KERN_INFO" ID: %2d %s\n", i, &mbuf[8]);
+ printk(KERN_INFO " ID: %2d %s\n", i, &mbuf[8]);
dev->id[c][i].devtype = mbuf[0];
rmb = mbuf[1];
n = mbuf[7];
+ if (!wide_chip)
+ goto not_wide;
if ((mbuf[7] & 0x60) == 0) {
goto not_wide;
}
- if ((i < 8) && ((dev->global_map[c] & 0x20) == 0)) {
- goto not_wide;
+ if (is885(dev) || is880(dev)) {
+ if ((i < 8) && ((dev->global_map[c] & 0x20) == 0))
+ goto not_wide;
+ } else { /* result of is870() merge - is this a bug? */
+ if ((dev->global_map[c] & 0x20) == 0)
+ goto not_wide;
}
if (lvdmode == 0) {
- goto chg_wide;
- }
- if (dev->sp[c][i] != 0x04) { // force u2
- goto chg_wide;
- }
-
- tmport = wkport + 0x1b;
- outb(0x01, tmport);
- tmport = wkport + 0x03;
- outb(satn[0], tmport++);
- outb(satn[1], tmport++);
- outb(satn[2], tmport++);
- outb(satn[3], tmport++);
- outb(satn[4], tmport++);
- outb(satn[5], tmport++);
- tmport += 0x06;
- outb(0, tmport);
- tmport += 0x02;
- outb(dev->id[c][i].devsp, tmport++);
- outb(0, tmport++);
- outb(satn[6], tmport++);
- outb(satn[7], tmport++);
- tmport += 0x03;
- outb(satn[8], tmport);
- tmport += 0x07;
-
- while ((inb(tmport) & 0x80) == 0x00)
+ goto chg_wide;
+ }
+ if (dev->sp[c][i] != 0x04) // force u2
+ {
+ goto chg_wide;
+ }
+
+ atp_writeb_io(dev, c, 0x1b, 0x01);
+ atp_writeb_io(dev, c, 3, satn[0]);
+ atp_writeb_io(dev, c, 4, satn[1]);
+ atp_writeb_io(dev, c, 5, satn[2]);
+ atp_writeb_io(dev, c, 6, satn[3]);
+ atp_writeb_io(dev, c, 7, satn[4]);
+ atp_writeb_io(dev, c, 8, satn[5]);
+ atp_writeb_io(dev, c, 0x0f, 0);
+ atp_writeb_io(dev, c, 0x11, dev->id[c][i].devsp);
+ atp_writeb_io(dev, c, 0x12, 0);
+ atp_writeb_io(dev, c, 0x13, satn[6]);
+ atp_writeb_io(dev, c, 0x14, satn[7]);
+ atp_writeb_io(dev, c, 0x18, satn[8]);
+
+ while ((atp_readb_io(dev, c, 0x1f) & 0x80) == 0x00)
cpu_relax();
- tmport -= 0x08;
- if ((inb(tmport) != 0x11) && (inb(tmport) != 0x8e)) {
+
+ if (atp_readb_io(dev, c, 0x17) != 0x11 && atp_readb_io(dev, c, 0x17) != 0x8e)
continue;
- }
- while (inb(tmport) != 0x8e)
+
+ while (atp_readb_io(dev, c, 0x17) != 0x8e)
cpu_relax();
+
try_u3:
j = 0;
- tmport = wkport + 0x14;
- outb(0x09, tmport);
- tmport += 0x04;
- outb(0x20, tmport);
- tmport += 0x07;
-
- while ((inb(tmport) & 0x80) == 0) {
- if ((inb(tmport) & 0x01) != 0) {
- tmport -= 0x06;
- outb(u3[j++], tmport);
- tmport += 0x06;
- }
+ atp_writeb_io(dev, c, 0x14, 0x09);
+ atp_writeb_io(dev, c, 0x18, 0x20);
+
+ while ((atp_readb_io(dev, c, 0x1f) & 0x80) == 0) {
+ if ((atp_readb_io(dev, c, 0x1f) & 0x01) != 0)
+ atp_writeb_io(dev, c, 0x19, u3[j++]);
cpu_relax();
}
- tmport -= 0x08;
- while ((inb(tmport) & 0x80) == 0x00)
+
+ while ((atp_readb_io(dev, c, 0x17) & 0x80) == 0x00)
cpu_relax();
- j = inb(tmport) & 0x0f;
+
+ j = atp_readb_io(dev, c, 0x17) & 0x0f;
if (j == 0x0f) {
goto u3p_in;
}
@@ -3437,19 +1914,13 @@ try_u3:
}
continue;
u3p_out:
- tmport = wkport + 0x18;
- outb(0x20, tmport);
- tmport += 0x07;
- while ((inb(tmport) & 0x80) == 0) {
- if ((inb(tmport) & 0x01) != 0) {
- tmport -= 0x06;
- outb(0, tmport);
- tmport += 0x06;
- }
+ atp_writeb_io(dev, c, 0x18, 0x20);
+ while ((atp_readb_io(dev, c, 0x1f) & 0x80) == 0) {
+ if ((atp_readb_io(dev, c, 0x1f) & 0x01) != 0)
+ atp_writeb_io(dev, c, 0x19, 0);
cpu_relax();
}
- tmport -= 0x08;
- j = inb(tmport) & 0x0f;
+ j = atp_readb_io(dev, c, 0x17) & 0x0f;
if (j == 0x0f) {
goto u3p_in;
}
@@ -3461,25 +1932,19 @@ u3p_out:
}
continue;
u3p_in:
- tmport = wkport + 0x14;
- outb(0x09, tmport);
- tmport += 0x04;
- outb(0x20, tmport);
- tmport += 0x07;
+ atp_writeb_io(dev, c, 0x14, 0x09);
+ atp_writeb_io(dev, c, 0x18, 0x20);
k = 0;
u3p_in1:
- j = inb(tmport);
+ j = atp_readb_io(dev, c, 0x1f);
if ((j & 0x01) != 0) {
- tmport -= 0x06;
- mbuf[k++] = inb(tmport);
- tmport += 0x06;
+ mbuf[k++] = atp_readb_io(dev, c, 0x19);
goto u3p_in1;
}
if ((j & 0x80) == 0x00) {
goto u3p_in1;
}
- tmport -= 0x08;
- j = inb(tmport) & 0x0f;
+ j = atp_readb_io(dev, c, 0x17) & 0x0f;
if (j == 0x0f) {
goto u3p_in;
}
@@ -3491,16 +1956,13 @@ u3p_in1:
}
continue;
u3p_cmd:
- tmport = wkport + 0x10;
- outb(0x30, tmport);
- tmport = wkport + 0x14;
- outb(0x00, tmport);
- tmport += 0x04;
- outb(0x08, tmport);
- tmport += 0x07;
- while ((inb(tmport) & 0x80) == 0x00);
- tmport -= 0x08;
- j = inb(tmport);
+ atp_writeb_io(dev, c, 0x10, 0x30);
+ atp_writeb_io(dev, c, 0x14, 0x00);
+ atp_writeb_io(dev, c, 0x18, 0x08);
+
+ while ((atp_readb_io(dev, c, 0x1f) & 0x80) == 0x00);
+
+ j = atp_readb_io(dev, c, 0x17);
if (j != 0x16) {
if (j == 0x4e) {
goto u3p_out;
@@ -3527,54 +1989,44 @@ u3p_cmd:
continue;
}
chg_wide:
- tmport = wkport + 0x1b;
- outb(0x01, tmport);
- tmport = wkport + 0x03;
- outb(satn[0], tmport++);
- outb(satn[1], tmport++);
- outb(satn[2], tmport++);
- outb(satn[3], tmport++);
- outb(satn[4], tmport++);
- outb(satn[5], tmport++);
- tmport += 0x06;
- outb(0, tmport);
- tmport += 0x02;
- outb(dev->id[c][i].devsp, tmport++);
- outb(0, tmport++);
- outb(satn[6], tmport++);
- outb(satn[7], tmport++);
- tmport += 0x03;
- outb(satn[8], tmport);
- tmport += 0x07;
-
- while ((inb(tmport) & 0x80) == 0x00)
+ atp_writeb_io(dev, c, 0x1b, 0x01);
+ atp_writeb_io(dev, c, 3, satn[0]);
+ atp_writeb_io(dev, c, 4, satn[1]);
+ atp_writeb_io(dev, c, 5, satn[2]);
+ atp_writeb_io(dev, c, 6, satn[3]);
+ atp_writeb_io(dev, c, 7, satn[4]);
+ atp_writeb_io(dev, c, 8, satn[5]);
+ atp_writeb_io(dev, c, 0x0f, 0);
+ atp_writeb_io(dev, c, 0x11, dev->id[c][i].devsp);
+ atp_writeb_io(dev, c, 0x12, 0);
+ atp_writeb_io(dev, c, 0x13, satn[6]);
+ atp_writeb_io(dev, c, 0x14, satn[7]);
+ atp_writeb_io(dev, c, 0x18, satn[8]);
+
+ while ((atp_readb_io(dev, c, 0x1f) & 0x80) == 0x00)
cpu_relax();
- tmport -= 0x08;
- if ((inb(tmport) != 0x11) && (inb(tmport) != 0x8e)) {
+
+ if (atp_readb_io(dev, c, 0x17) != 0x11 && atp_readb_io(dev, c, 0x17) != 0x8e)
continue;
- }
- while (inb(tmport) != 0x8e)
+
+ while (atp_readb_io(dev, c, 0x17) != 0x8e)
cpu_relax();
+
try_wide:
j = 0;
- tmport = wkport + 0x14;
- outb(0x05, tmport);
- tmport += 0x04;
- outb(0x20, tmport);
- tmport += 0x07;
-
- while ((inb(tmport) & 0x80) == 0) {
- if ((inb(tmport) & 0x01) != 0) {
- tmport -= 0x06;
- outb(wide[j++], tmport);
- tmport += 0x06;
- }
+ atp_writeb_io(dev, c, 0x14, 0x05);
+ atp_writeb_io(dev, c, 0x18, 0x20);
+
+ while ((atp_readb_io(dev, c, 0x1f) & 0x80) == 0) {
+ if ((atp_readb_io(dev, c, 0x1f) & 0x01) != 0)
+ atp_writeb_io(dev, c, 0x19, wide[j++]);
cpu_relax();
}
- tmport -= 0x08;
- while ((inb(tmport) & 0x80) == 0x00)
+
+ while ((atp_readb_io(dev, c, 0x17) & 0x80) == 0x00)
cpu_relax();
- j = inb(tmport) & 0x0f;
+
+ j = atp_readb_io(dev, c, 0x17) & 0x0f;
if (j == 0x0f) {
goto widep_in;
}
@@ -3586,19 +2038,13 @@ try_wide:
}
continue;
widep_out:
- tmport = wkport + 0x18;
- outb(0x20, tmport);
- tmport += 0x07;
- while ((inb(tmport) & 0x80) == 0) {
- if ((inb(tmport) & 0x01) != 0) {
- tmport -= 0x06;
- outb(0, tmport);
- tmport += 0x06;
- }
+ atp_writeb_io(dev, c, 0x18, 0x20);
+ while ((atp_readb_io(dev, c, 0x1f) & 0x80) == 0) {
+ if ((atp_readb_io(dev, c, 0x1f) & 0x01) != 0)
+ atp_writeb_io(dev, c, 0x19, 0);
cpu_relax();
}
- tmport -= 0x08;
- j = inb(tmport) & 0x0f;
+ j = atp_readb_io(dev, c, 0x17) & 0x0f;
if (j == 0x0f) {
goto widep_in;
}
@@ -3610,25 +2056,19 @@ widep_out:
}
continue;
widep_in:
- tmport = wkport + 0x14;
- outb(0xff, tmport);
- tmport += 0x04;
- outb(0x20, tmport);
- tmport += 0x07;
+ atp_writeb_io(dev, c, 0x14, 0xff);
+ atp_writeb_io(dev, c, 0x18, 0x20);
k = 0;
widep_in1:
- j = inb(tmport);
+ j = atp_readb_io(dev, c, 0x1f);
if ((j & 0x01) != 0) {
- tmport -= 0x06;
- mbuf[k++] = inb(tmport);
- tmport += 0x06;
+ mbuf[k++] = atp_readb_io(dev, c, 0x19);
goto widep_in1;
}
if ((j & 0x80) == 0x00) {
goto widep_in1;
}
- tmport -= 0x08;
- j = inb(tmport) & 0x0f;
+ j = atp_readb_io(dev, c, 0x17) & 0x0f;
if (j == 0x0f) {
goto widep_in;
}
@@ -3640,17 +2080,14 @@ widep_in1:
}
continue;
widep_cmd:
- tmport = wkport + 0x10;
- outb(0x30, tmport);
- tmport = wkport + 0x14;
- outb(0x00, tmport);
- tmport += 0x04;
- outb(0x08, tmport);
- tmport += 0x07;
- while ((inb(tmport) & 0x80) == 0x00)
+ atp_writeb_io(dev, c, 0x10, 0x30);
+ atp_writeb_io(dev, c, 0x14, 0x00);
+ atp_writeb_io(dev, c, 0x18, 0x08);
+
+ while ((atp_readb_io(dev, c, 0x1f) & 0x80) == 0x00)
cpu_relax();
- tmport -= 0x08;
- j = inb(tmport);
+
+ j = atp_readb_io(dev, c, 0x17);
if (j != 0x16) {
if (j == 0x4e) {
goto widep_out;
@@ -3673,88 +2110,81 @@ widep_cmd:
m = m << i;
dev->wide_id[c] |= m;
not_wide:
- if ((dev->id[c][i].devtype == 0x00) || (dev->id[c][i].devtype == 0x07) ||
- ((dev->id[c][i].devtype == 0x05) && ((n & 0x10) != 0))) {
+ if ((dev->id[c][i].devtype == 0x00) || (dev->id[c][i].devtype == 0x07) || ((dev->id[c][i].devtype == 0x05) && ((n & 0x10) != 0))) {
m = 1;
m = m << i;
if ((dev->async[c] & m) != 0) {
- goto set_sync;
+ goto set_sync;
}
}
continue;
set_sync:
- if (dev->sp[c][i] == 0x02) {
- synu[4]=0x0c;
- synuw[4]=0x0c;
+ if ((!is885(dev) && !is880(dev)) || (dev->sp[c][i] == 0x02)) {
+ synu[4] = 0x0c;
+ synuw[4] = 0x0c;
} else {
- if (dev->sp[c][i] >= 0x03) {
- synu[4]=0x0a;
- synuw[4]=0x0a;
- }
+ if (dev->sp[c][i] >= 0x03) {
+ synu[4] = 0x0a;
+ synuw[4] = 0x0a;
+ }
}
- tmport = wkport + 0x1b;
j = 0;
if ((m & dev->wide_id[c]) != 0) {
j |= 0x01;
}
- outb(j, tmport);
- tmport = wkport + 0x03;
- outb(satn[0], tmport++);
- outb(satn[1], tmport++);
- outb(satn[2], tmport++);
- outb(satn[3], tmport++);
- outb(satn[4], tmport++);
- outb(satn[5], tmport++);
- tmport += 0x06;
- outb(0, tmport);
- tmport += 0x02;
- outb(dev->id[c][i].devsp, tmport++);
- outb(0, tmport++);
- outb(satn[6], tmport++);
- outb(satn[7], tmport++);
- tmport += 0x03;
- outb(satn[8], tmport);
- tmport += 0x07;
-
- while ((inb(tmport) & 0x80) == 0x00)
+ atp_writeb_io(dev, c, 0x1b, j);
+ atp_writeb_io(dev, c, 3, satn[0]);
+ atp_writeb_io(dev, c, 4, satn[1]);
+ atp_writeb_io(dev, c, 5, satn[2]);
+ atp_writeb_io(dev, c, 6, satn[3]);
+ atp_writeb_io(dev, c, 7, satn[4]);
+ atp_writeb_io(dev, c, 8, satn[5]);
+ atp_writeb_io(dev, c, 0x0f, 0);
+ atp_writeb_io(dev, c, 0x11, dev->id[c][i].devsp);
+ atp_writeb_io(dev, c, 0x12, 0);
+ atp_writeb_io(dev, c, 0x13, satn[6]);
+ atp_writeb_io(dev, c, 0x14, satn[7]);
+ atp_writeb_io(dev, c, 0x18, satn[8]);
+
+ while ((atp_readb_io(dev, c, 0x1f) & 0x80) == 0x00)
cpu_relax();
- tmport -= 0x08;
- if ((inb(tmport) != 0x11) && (inb(tmport) != 0x8e)) {
+
+ if (atp_readb_io(dev, c, 0x17) != 0x11 && atp_readb_io(dev, c, 0x17) != 0x8e)
continue;
- }
- while (inb(tmport) != 0x8e)
+
+ while (atp_readb_io(dev, c, 0x17) != 0x8e)
cpu_relax();
+
try_sync:
j = 0;
- tmport = wkport + 0x14;
- outb(0x06, tmport);
- tmport += 0x04;
- outb(0x20, tmport);
- tmport += 0x07;
-
- while ((inb(tmport) & 0x80) == 0) {
- if ((inb(tmport) & 0x01) != 0) {
- tmport -= 0x06;
+ atp_writeb_io(dev, c, 0x14, 0x06);
+ atp_writeb_io(dev, c, 0x18, 0x20);
+
+ while ((atp_readb_io(dev, c, 0x1f) & 0x80) == 0) {
+ if ((atp_readb_io(dev, c, 0x1f) & 0x01) != 0) {
if ((m & dev->wide_id[c]) != 0) {
- if ((m & dev->ultra_map[c]) != 0) {
- outb(synuw[j++], tmport);
- } else {
- outb(synw[j++], tmport);
- }
+ if (is885(dev) || is880(dev)) {
+ if ((m & dev->ultra_map[c]) != 0) {
+ atp_writeb_io(dev, c, 0x19, synuw[j++]);
+ } else {
+ atp_writeb_io(dev, c, 0x19, synw[j++]);
+ }
+ } else
+ atp_writeb_io(dev, c, 0x19, synw_870[j++]);
} else {
if ((m & dev->ultra_map[c]) != 0) {
- outb(synu[j++], tmport);
+ atp_writeb_io(dev, c, 0x19, synu[j++]);
} else {
- outb(synn[j++], tmport);
+ atp_writeb_io(dev, c, 0x19, synn[j++]);
}
}
- tmport += 0x06;
}
}
- tmport -= 0x08;
- while ((inb(tmport) & 0x80) == 0x00)
+
+ while ((atp_readb_io(dev, c, 0x17) & 0x80) == 0x00)
cpu_relax();
- j = inb(tmport) & 0x0f;
+
+ j = atp_readb_io(dev, c, 0x17) & 0x0f;
if (j == 0x0f) {
goto phase_ins;
}
@@ -3766,19 +2196,13 @@ try_sync:
}
continue;
phase_outs:
- tmport = wkport + 0x18;
- outb(0x20, tmport);
- tmport += 0x07;
- while ((inb(tmport) & 0x80) == 0x00) {
- if ((inb(tmport) & 0x01) != 0x00) {
- tmport -= 0x06;
- outb(0x00, tmport);
- tmport += 0x06;
- }
+ atp_writeb_io(dev, c, 0x18, 0x20);
+ while ((atp_readb_io(dev, c, 0x1f) & 0x80) == 0x00) {
+ if ((atp_readb_io(dev, c, 0x1f) & 0x01) != 0x00)
+ atp_writeb_io(dev, c, 0x19, 0x00);
cpu_relax();
}
- tmport -= 0x08;
- j = inb(tmport);
+ j = atp_readb_io(dev, c, 0x17);
if (j == 0x85) {
goto tar_dcons;
}
@@ -3794,26 +2218,25 @@ phase_outs:
}
continue;
phase_ins:
- tmport = wkport + 0x14;
- outb(0x06, tmport);
- tmport += 0x04;
- outb(0x20, tmport);
- tmport += 0x07;
+ if (is885(dev) || is880(dev))
+ atp_writeb_io(dev, c, 0x14, 0x06);
+ else
+ atp_writeb_io(dev, c, 0x14, 0xff);
+ atp_writeb_io(dev, c, 0x18, 0x20);
k = 0;
phase_ins1:
- j = inb(tmport);
+ j = atp_readb_io(dev, c, 0x1f);
if ((j & 0x01) != 0x00) {
- tmport -= 0x06;
- mbuf[k++] = inb(tmport);
- tmport += 0x06;
+ mbuf[k++] = atp_readb_io(dev, c, 0x19);
goto phase_ins1;
}
if ((j & 0x80) == 0x00) {
goto phase_ins1;
}
- tmport -= 0x08;
- while ((inb(tmport) & 0x80) == 0x00);
- j = inb(tmport);
+
+ while ((atp_readb_io(dev, c, 0x17) & 0x80) == 0x00);
+
+ j = atp_readb_io(dev, c, 0x17);
if (j == 0x85) {
goto tar_dcons;
}
@@ -3829,18 +2252,15 @@ phase_ins1:
}
continue;
phase_cmds:
- tmport = wkport + 0x10;
- outb(0x30, tmport);
+ atp_writeb_io(dev, c, 0x10, 0x30);
tar_dcons:
- tmport = wkport + 0x14;
- outb(0x00, tmport);
- tmport += 0x04;
- outb(0x08, tmport);
- tmport += 0x07;
- while ((inb(tmport) & 0x80) == 0x00)
+ atp_writeb_io(dev, c, 0x14, 0x00);
+ atp_writeb_io(dev, c, 0x18, 0x08);
+
+ while ((atp_readb_io(dev, c, 0x1f) & 0x80) == 0x00)
cpu_relax();
- tmport -= 0x08;
- j = inb(tmport);
+
+ j = atp_readb_io(dev, c, 0x17);
if (j != 0x16) {
continue;
}
@@ -3856,14 +2276,21 @@ tar_dcons:
if (mbuf[3] > 0x64) {
continue;
}
- if (mbuf[4] > 0x0e) {
- mbuf[4] = 0x0e;
+ if (is885(dev) || is880(dev)) {
+ if (mbuf[4] > 0x0e) {
+ mbuf[4] = 0x0e;
+ }
+ } else {
+ if (mbuf[4] > 0x0c) {
+ mbuf[4] = 0x0c;
+ }
}
dev->id[c][i].devsp = mbuf[4];
- if (mbuf[3] < 0x0c){
- j = 0xb0;
- goto set_syn_ok;
- }
+ if (is885(dev) || is880(dev))
+ if (mbuf[3] < 0x0c) {
+ j = 0xb0;
+ goto set_syn_ok;
+ }
if ((mbuf[3] < 0x0d) && (rmb == 0)) {
j = 0xa0;
goto set_syn_ok;
@@ -3881,16 +2308,10 @@ tar_dcons:
goto set_syn_ok;
}
j = 0x60;
- set_syn_ok:
+set_syn_ok:
dev->id[c][i].devsp = (dev->id[c][i].devsp & 0x0f) | j;
-#ifdef ED_DBGP
+#ifdef ED_DBGP
printk("dev->id[%2d][%2d].devsp = %2x\n",c,i,dev->id[c][i].devsp);
#endif
}
- tmport = wkport + 0x16;
- outb(0x80, tmport);
}
-
-module_init(atp870u_init);
-module_exit(atp870u_exit);
-
diff --git a/drivers/scsi/atp870u.h b/drivers/scsi/atp870u.h
index 5cf62566ad42..9b839b1e895a 100644
--- a/drivers/scsi/atp870u.h
+++ b/drivers/scsi/atp870u.h
@@ -26,22 +26,18 @@ struct atp_unit
unsigned long baseport;
unsigned long ioport[2];
unsigned long pciport[2];
- unsigned long irq;
unsigned char last_cmd[2];
unsigned char in_snd[2];
unsigned char in_int[2];
unsigned char quhd[2];
unsigned char quend[2];
unsigned char global_map[2];
- unsigned char chip_ver;
- unsigned char scam_on;
unsigned char host_id[2];
unsigned int working[2];
unsigned short wide_id[2];
unsigned short active_id[2];
unsigned short ultra_map[2];
unsigned short async[2];
- unsigned short dev_id;
unsigned char sp[2][16];
unsigned char r1f[2][16];
struct scsi_cmnd *quereq[2][qcnt];
diff --git a/drivers/scsi/bfa/bfa.h b/drivers/scsi/bfa/bfa.h
index 4ad7e368bbc2..0e119d838e1b 100644
--- a/drivers/scsi/bfa/bfa.h
+++ b/drivers/scsi/bfa/bfa.h
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
diff --git a/drivers/scsi/bfa/bfa_core.c b/drivers/scsi/bfa/bfa_core.c
index e3f67b097a5c..2ea0db4b62a7 100644
--- a/drivers/scsi/bfa/bfa_core.c
+++ b/drivers/scsi/bfa/bfa_core.c
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
diff --git a/drivers/scsi/bfa/bfa_cs.h b/drivers/scsi/bfa/bfa_cs.h
index 91a8aa394db5..da9cf655be26 100644
--- a/drivers/scsi/bfa/bfa_cs.h
+++ b/drivers/scsi/bfa/bfa_cs.h
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
diff --git a/drivers/scsi/bfa/bfa_defs.h b/drivers/scsi/bfa/bfa_defs.h
index 877b86dd2837..5dc3782d615b 100644
--- a/drivers/scsi/bfa/bfa_defs.h
+++ b/drivers/scsi/bfa/bfa_defs.h
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
diff --git a/drivers/scsi/bfa/bfa_defs_fcs.h b/drivers/scsi/bfa/bfa_defs_fcs.h
index 06f0a163ca35..5815a904574d 100644
--- a/drivers/scsi/bfa/bfa_defs_fcs.h
+++ b/drivers/scsi/bfa/bfa_defs_fcs.h
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
diff --git a/drivers/scsi/bfa/bfa_defs_svc.h b/drivers/scsi/bfa/bfa_defs_svc.h
index 638f441ffc38..e81707f938cb 100644
--- a/drivers/scsi/bfa/bfa_defs_svc.h
+++ b/drivers/scsi/bfa/bfa_defs_svc.h
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
diff --git a/drivers/scsi/bfa/bfa_fc.h b/drivers/scsi/bfa/bfa_fc.h
index 64069a0a3d0d..18b7304d6b0b 100644
--- a/drivers/scsi/bfa/bfa_fc.h
+++ b/drivers/scsi/bfa/bfa_fc.h
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
diff --git a/drivers/scsi/bfa/bfa_fcbuild.c b/drivers/scsi/bfa/bfa_fcbuild.c
index dce787f6cca2..b8dadc9cc993 100644
--- a/drivers/scsi/bfa/bfa_fcbuild.c
+++ b/drivers/scsi/bfa/bfa_fcbuild.c
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
diff --git a/drivers/scsi/bfa/bfa_fcbuild.h b/drivers/scsi/bfa/bfa_fcbuild.h
index 03c753d1e548..b109a8813401 100644
--- a/drivers/scsi/bfa/bfa_fcbuild.h
+++ b/drivers/scsi/bfa/bfa_fcbuild.h
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
diff --git a/drivers/scsi/bfa/bfa_fcpim.c b/drivers/scsi/bfa/bfa_fcpim.c
index d7385d1d9c5a..20982e7cdd81 100644
--- a/drivers/scsi/bfa/bfa_fcpim.c
+++ b/drivers/scsi/bfa/bfa_fcpim.c
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
diff --git a/drivers/scsi/bfa/bfa_fcpim.h b/drivers/scsi/bfa/bfa_fcpim.h
index e693af6e5930..e93921dec347 100644
--- a/drivers/scsi/bfa/bfa_fcpim.h
+++ b/drivers/scsi/bfa/bfa_fcpim.h
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
diff --git a/drivers/scsi/bfa/bfa_fcs.c b/drivers/scsi/bfa/bfa_fcs.c
index 0f19455951ec..1e7e139d71ea 100644
--- a/drivers/scsi/bfa/bfa_fcs.c
+++ b/drivers/scsi/bfa/bfa_fcs.c
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
diff --git a/drivers/scsi/bfa/bfa_fcs.h b/drivers/scsi/bfa/bfa_fcs.h
index 42bcb970445a..06dc215ea050 100644
--- a/drivers/scsi/bfa/bfa_fcs.h
+++ b/drivers/scsi/bfa/bfa_fcs.h
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
@@ -633,7 +634,7 @@ void bfa_fcs_fcpim_uf_recv(struct bfa_fcs_itnim_s *itnim,
/*
* HBA Attribute Block : BFA internal representation. Note : Some variable
- * sizes have been trimmed to suit BFA For Ex : Model will be "Brocade". Based
+ * sizes have been trimmed to suit BFA For Ex : Model will be "QLogic ". Based
* on this the size has been reduced to 16 bytes from the standard's 64 bytes.
*/
struct bfa_fcs_fdmi_hba_attr_s {
diff --git a/drivers/scsi/bfa/bfa_fcs_fcpim.c b/drivers/scsi/bfa/bfa_fcs_fcpim.c
index 6dc7926a3edd..4f089d76afb1 100644
--- a/drivers/scsi/bfa/bfa_fcs_fcpim.c
+++ b/drivers/scsi/bfa/bfa_fcs_fcpim.c
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
diff --git a/drivers/scsi/bfa/bfa_fcs_lport.c b/drivers/scsi/bfa/bfa_fcs_lport.c
index ff75ef891755..7733ad5305d4 100644
--- a/drivers/scsi/bfa/bfa_fcs_lport.c
+++ b/drivers/scsi/bfa/bfa_fcs_lport.c
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
@@ -2653,7 +2654,7 @@ bfa_fcs_fdmi_get_hbaattr(struct bfa_fcs_lport_fdmi_s *fdmi,
strncpy(hba_attr->node_sym_name.symname,
port->port_cfg.node_sym_name.symname, BFA_SYMNAME_MAXLEN);
- strcpy(hba_attr->vendor_info, "BROCADE");
+ strcpy(hba_attr->vendor_info, "QLogic");
hba_attr->num_ports =
cpu_to_be32(bfa_ioc_get_nports(&port->fcs->bfa->ioc));
hba_attr->fabric_name = port->fabric->lps->pr_nwwn;
diff --git a/drivers/scsi/bfa/bfa_fcs_rport.c b/drivers/scsi/bfa/bfa_fcs_rport.c
index 2035b0d64351..de50349a39ce 100644
--- a/drivers/scsi/bfa/bfa_fcs_rport.c
+++ b/drivers/scsi/bfa/bfa_fcs_rport.c
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
diff --git a/drivers/scsi/bfa/bfa_hw_cb.c b/drivers/scsi/bfa/bfa_hw_cb.c
index ea24d4c6e67a..c4a0c0eb88a5 100644
--- a/drivers/scsi/bfa/bfa_hw_cb.c
+++ b/drivers/scsi/bfa/bfa_hw_cb.c
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
diff --git a/drivers/scsi/bfa/bfa_hw_ct.c b/drivers/scsi/bfa/bfa_hw_ct.c
index 637527f48b40..b0ff378dece2 100644
--- a/drivers/scsi/bfa/bfa_hw_ct.c
+++ b/drivers/scsi/bfa/bfa_hw_ct.c
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
diff --git a/drivers/scsi/bfa/bfa_ioc.c b/drivers/scsi/bfa/bfa_ioc.c
index 98f7e8cca52d..251e2ff8ff5f 100644
--- a/drivers/scsi/bfa/bfa_ioc.c
+++ b/drivers/scsi/bfa/bfa_ioc.c
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
@@ -2697,7 +2698,7 @@ bfa_ioc_reset_fwstate(struct bfa_ioc_s *ioc)
bfa_ioc_set_alt_ioc_fwstate(ioc, BFI_IOC_UNINIT);
}
-#define BFA_MFG_NAME "Brocade"
+#define BFA_MFG_NAME "QLogic"
void
bfa_ioc_get_adapter_attr(struct bfa_ioc_s *ioc,
struct bfa_adapter_attr_s *ad_attr)
diff --git a/drivers/scsi/bfa/bfa_ioc.h b/drivers/scsi/bfa/bfa_ioc.h
index a38aafa030b3..713745da44c6 100644
--- a/drivers/scsi/bfa/bfa_ioc.h
+++ b/drivers/scsi/bfa/bfa_ioc.h
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
diff --git a/drivers/scsi/bfa/bfa_ioc_cb.c b/drivers/scsi/bfa/bfa_ioc_cb.c
index 453c2f5b5561..f1b80da298c8 100644
--- a/drivers/scsi/bfa/bfa_ioc_cb.c
+++ b/drivers/scsi/bfa/bfa_ioc_cb.c
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
diff --git a/drivers/scsi/bfa/bfa_ioc_ct.c b/drivers/scsi/bfa/bfa_ioc_ct.c
index bd53150e4ee0..651a8fb93037 100644
--- a/drivers/scsi/bfa/bfa_ioc_ct.c
+++ b/drivers/scsi/bfa/bfa_ioc_ct.c
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
diff --git a/drivers/scsi/bfa/bfa_modules.h b/drivers/scsi/bfa/bfa_modules.h
index a14c784ff3fc..53135f21fa0e 100644
--- a/drivers/scsi/bfa/bfa_modules.h
+++ b/drivers/scsi/bfa/bfa_modules.h
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
diff --git a/drivers/scsi/bfa/bfa_plog.h b/drivers/scsi/bfa/bfa_plog.h
index 1c9baa68339b..da570c0b8275 100644
--- a/drivers/scsi/bfa/bfa_plog.h
+++ b/drivers/scsi/bfa/bfa_plog.h
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
diff --git a/drivers/scsi/bfa/bfa_port.c b/drivers/scsi/bfa/bfa_port.c
index 8ea7697deb9b..da1721e0d167 100644
--- a/drivers/scsi/bfa/bfa_port.c
+++ b/drivers/scsi/bfa/bfa_port.c
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
diff --git a/drivers/scsi/bfa/bfa_port.h b/drivers/scsi/bfa/bfa_port.h
index 2fcab6bc6280..26dc1bf14c85 100644
--- a/drivers/scsi/bfa/bfa_port.h
+++ b/drivers/scsi/bfa/bfa_port.h
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
diff --git a/drivers/scsi/bfa/bfa_svc.c b/drivers/scsi/bfa/bfa_svc.c
index 625225f31081..12de292175ef 100644
--- a/drivers/scsi/bfa/bfa_svc.c
+++ b/drivers/scsi/bfa/bfa_svc.c
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
diff --git a/drivers/scsi/bfa/bfa_svc.h b/drivers/scsi/bfa/bfa_svc.h
index ef07365991e7..ea2278bc78a8 100644
--- a/drivers/scsi/bfa/bfa_svc.h
+++ b/drivers/scsi/bfa/bfa_svc.h
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c
index cc3b9d3d6d40..9d253cb83ee7 100644
--- a/drivers/scsi/bfa/bfad.c
+++ b/drivers/scsi/bfa/bfad.c
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
@@ -130,13 +131,9 @@ MODULE_PARM_DESC(bfa_linkup_delay, "Link up delay, default=30 secs for "
"boot port. Otherwise 10 secs in RHEL4 & 0 for "
"[RHEL5, SLES10, ESX40] Range[>0]");
module_param(msix_disable_cb, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(msix_disable_cb, "Disable Message Signaled Interrupts "
- "for Brocade-415/425/815/825 cards, default=0, "
- " Range[false:0|true:1]");
+MODULE_PARM_DESC(msix_disable_cb, "Disable Message Signaled Interrupts for QLogic-415/425/815/825 cards, default=0 Range[false:0|true:1]");
module_param(msix_disable_ct, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(msix_disable_ct, "Disable Message Signaled Interrupts "
- "if possible for Brocade-1010/1020/804/1007/902/1741 "
- "cards, default=0, Range[false:0|true:1]");
+MODULE_PARM_DESC(msix_disable_ct, "Disable Message Signaled Interrupts if possible for QLogic-1010/1020/804/1007/902/1741 cards, default=0, Range[false:0|true:1]");
module_param(fdmi_enable, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(fdmi_enable, "Enables fdmi registration, default=1, "
"Range[false:0|true:1]");
@@ -838,8 +835,7 @@ bfad_drv_init(struct bfad_s *bfad)
printk(KERN_WARNING "bfad%d bfad_hal_mem_alloc failure\n",
bfad->inst_no);
printk(KERN_WARNING
- "Not enough memory to attach all Brocade HBA ports, %s",
- "System may need more memory.\n");
+ "Not enough memory to attach all QLogic BR-series HBA ports. System may need more memory.\n");
return BFA_STATUS_FAILED;
}
@@ -1710,7 +1706,7 @@ bfad_init(void)
{
int error = 0;
- printk(KERN_INFO "Brocade BFA FC/FCOE SCSI driver - version: %s\n",
+ pr_info("QLogic BR-series BFA FC/FCOE SCSI driver - version: %s\n",
BFAD_DRIVER_VERSION);
if (num_sgpgs > 0)
@@ -1817,6 +1813,6 @@ bfad_free_fwimg(void)
module_init(bfad_init);
module_exit(bfad_exit);
MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Brocade Fibre Channel HBA Driver" BFAD_PROTO_NAME);
-MODULE_AUTHOR("Brocade Communications Systems, Inc.");
+MODULE_DESCRIPTION("QLogic BR-series Fibre Channel HBA Driver" BFAD_PROTO_NAME);
+MODULE_AUTHOR("QLogic Corporation");
MODULE_VERSION(BFAD_DRIVER_VERSION);
diff --git a/drivers/scsi/bfa/bfad_attr.c b/drivers/scsi/bfa/bfad_attr.c
index 40be670a1cbc..13db3b7bc873 100644
--- a/drivers/scsi/bfa/bfad_attr.c
+++ b/drivers/scsi/bfa/bfad_attr.c
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
@@ -750,65 +751,65 @@ bfad_im_model_desc_show(struct device *dev, struct device_attribute *attr,
bfa_get_adapter_model(&bfad->bfa, model);
nports = bfa_get_nports(&bfad->bfa);
- if (!strcmp(model, "Brocade-425"))
+ if (!strcmp(model, "QLogic-425"))
snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 4Gbps PCIe dual port FC HBA");
- else if (!strcmp(model, "Brocade-825"))
+ "QLogic BR-series 4Gbps PCIe dual port FC HBA");
+ else if (!strcmp(model, "QLogic-825"))
snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 8Gbps PCIe dual port FC HBA");
- else if (!strcmp(model, "Brocade-42B"))
+ "QLogic BR-series 8Gbps PCIe dual port FC HBA");
+ else if (!strcmp(model, "QLogic-42B"))
snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 4Gbps PCIe dual port FC HBA for HP");
- else if (!strcmp(model, "Brocade-82B"))
+ "QLogic BR-series 4Gbps PCIe dual port FC HBA for HP");
+ else if (!strcmp(model, "QLogic-82B"))
snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 8Gbps PCIe dual port FC HBA for HP");
- else if (!strcmp(model, "Brocade-1010"))
+ "QLogic BR-series 8Gbps PCIe dual port FC HBA for HP");
+ else if (!strcmp(model, "QLogic-1010"))
snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 10Gbps single port CNA");
- else if (!strcmp(model, "Brocade-1020"))
+ "QLogic BR-series 10Gbps single port CNA");
+ else if (!strcmp(model, "QLogic-1020"))
snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 10Gbps dual port CNA");
- else if (!strcmp(model, "Brocade-1007"))
+ "QLogic BR-series 10Gbps dual port CNA");
+ else if (!strcmp(model, "QLogic-1007"))
snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 10Gbps CNA for IBM Blade Center");
- else if (!strcmp(model, "Brocade-415"))
+ "QLogic BR-series 10Gbps CNA for IBM Blade Center");
+ else if (!strcmp(model, "QLogic-415"))
snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 4Gbps PCIe single port FC HBA");
- else if (!strcmp(model, "Brocade-815"))
+ "QLogic BR-series 4Gbps PCIe single port FC HBA");
+ else if (!strcmp(model, "QLogic-815"))
snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 8Gbps PCIe single port FC HBA");
- else if (!strcmp(model, "Brocade-41B"))
+ "QLogic BR-series 8Gbps PCIe single port FC HBA");
+ else if (!strcmp(model, "QLogic-41B"))
snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 4Gbps PCIe single port FC HBA for HP");
- else if (!strcmp(model, "Brocade-81B"))
+ "QLogic BR-series 4Gbps PCIe single port FC HBA for HP");
+ else if (!strcmp(model, "QLogic-81B"))
snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 8Gbps PCIe single port FC HBA for HP");
- else if (!strcmp(model, "Brocade-804"))
+ "QLogic BR-series 8Gbps PCIe single port FC HBA for HP");
+ else if (!strcmp(model, "QLogic-804"))
snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 8Gbps FC HBA for HP Bladesystem C-class");
- else if (!strcmp(model, "Brocade-1741"))
+ "QLogic BR-series 8Gbps FC HBA for HP Bladesystem C-class");
+ else if (!strcmp(model, "QLogic-1741"))
snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 10Gbps CNA for Dell M-Series Blade Servers");
- else if (strstr(model, "Brocade-1860")) {
+ "QLogic BR-series 10Gbps CNA for Dell M-Series Blade Servers");
+ else if (strstr(model, "QLogic-1860")) {
if (nports == 1 && bfa_ioc_is_cna(&bfad->bfa.ioc))
snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 10Gbps single port CNA");
+ "QLogic BR-series 10Gbps single port CNA");
else if (nports == 1 && !bfa_ioc_is_cna(&bfad->bfa.ioc))
snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 16Gbps PCIe single port FC HBA");
+ "QLogic BR-series 16Gbps PCIe single port FC HBA");
else if (nports == 2 && bfa_ioc_is_cna(&bfad->bfa.ioc))
snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 10Gbps dual port CNA");
+ "QLogic BR-series 10Gbps dual port CNA");
else if (nports == 2 && !bfa_ioc_is_cna(&bfad->bfa.ioc))
snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 16Gbps PCIe dual port FC HBA");
- } else if (!strcmp(model, "Brocade-1867")) {
+ "QLogic BR-series 16Gbps PCIe dual port FC HBA");
+ } else if (!strcmp(model, "QLogic-1867")) {
if (nports == 1 && !bfa_ioc_is_cna(&bfad->bfa.ioc))
snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 16Gbps PCIe single port FC HBA for IBM");
+ "QLogic BR-series 16Gbps PCIe single port FC HBA for IBM");
else if (nports == 2 && !bfa_ioc_is_cna(&bfad->bfa.ioc))
snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
- "Brocade 16Gbps PCIe dual port FC HBA for IBM");
+ "QLogic BR-series 16Gbps PCIe dual port FC HBA for IBM");
} else
snprintf(model_descr, BFA_ADAPTER_MODEL_DESCR_LEN,
"Invalid Model");
diff --git a/drivers/scsi/bfa/bfad_bsg.c b/drivers/scsi/bfa/bfad_bsg.c
index 023b9d42ad9a..d1ad0208dfe7 100644
--- a/drivers/scsi/bfa/bfad_bsg.c
+++ b/drivers/scsi/bfa/bfad_bsg.c
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
diff --git a/drivers/scsi/bfa/bfad_bsg.h b/drivers/scsi/bfa/bfad_bsg.h
index 90abef691585..917e140dfbcc 100644
--- a/drivers/scsi/bfa/bfad_bsg.h
+++ b/drivers/scsi/bfa/bfad_bsg.h
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
diff --git a/drivers/scsi/bfa/bfad_debugfs.c b/drivers/scsi/bfa/bfad_debugfs.c
index 74a307c0a240..8dcd8c70c7ee 100644
--- a/drivers/scsi/bfa/bfad_debugfs.c
+++ b/drivers/scsi/bfa/bfad_debugfs.c
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
diff --git a/drivers/scsi/bfa/bfad_drv.h b/drivers/scsi/bfa/bfad_drv.h
index 8b97877d42cf..f9e862093a25 100644
--- a/drivers/scsi/bfa/bfad_drv.h
+++ b/drivers/scsi/bfa/bfad_drv.h
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
@@ -57,7 +58,7 @@
#ifdef BFA_DRIVER_VERSION
#define BFAD_DRIVER_VERSION BFA_DRIVER_VERSION
#else
-#define BFAD_DRIVER_VERSION "3.2.23.0"
+#define BFAD_DRIVER_VERSION "3.2.25.0"
#endif
#define BFAD_PROTO_NAME FCPI_NAME
diff --git a/drivers/scsi/bfa/bfad_im.c b/drivers/scsi/bfa/bfad_im.c
index 299c6f80d460..6c805e13f8dd 100644
--- a/drivers/scsi/bfa/bfad_im.c
+++ b/drivers/scsi/bfa/bfad_im.c
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
@@ -185,7 +186,7 @@ bfad_im_info(struct Scsi_Host *shost)
memset(bfa_buf, 0, sizeof(bfa_buf));
snprintf(bfa_buf, sizeof(bfa_buf),
- "Brocade FC/FCOE Adapter, " "hwpath: %s driver: %s",
+ "QLogic BR-series FC/FCOE Adapter, hwpath: %s driver: %s",
bfad->pci_name, BFAD_DRIVER_VERSION);
return bfa_buf;
@@ -271,6 +272,19 @@ bfad_im_target_reset_send(struct bfad_s *bfad, struct scsi_cmnd *cmnd,
cmnd->host_scribble = NULL;
cmnd->SCp.Status = 0;
bfa_itnim = bfa_fcs_itnim_get_halitn(&itnim->fcs_itnim);
+ /*
+ * bfa_itnim can be NULL if the port gets disconnected and the bfa
+ * and fcs layers have cleaned up their nexus with the targets and
+ * the same has not been cleaned up by the shim
+ */
+ if (bfa_itnim == NULL) {
+ bfa_tskim_free(tskim);
+ BFA_LOG(KERN_ERR, bfad, bfa_log_level,
+ "target reset, bfa_itnim is NULL\n");
+ rc = BFA_STATUS_FAILED;
+ goto out;
+ }
+
memset(&scsilun, 0, sizeof(scsilun));
bfa_tskim_start(tskim, bfa_itnim, scsilun,
FCP_TM_TARGET_RESET, BFAD_TARGET_RESET_TMO);
@@ -326,6 +340,19 @@ bfad_im_reset_lun_handler(struct scsi_cmnd *cmnd)
cmnd->SCp.ptr = (char *)&wq;
cmnd->SCp.Status = 0;
bfa_itnim = bfa_fcs_itnim_get_halitn(&itnim->fcs_itnim);
+ /*
+ * bfa_itnim can be NULL if the port gets disconnected and the bfa
+ * and fcs layers have cleaned up their nexus with the targets and
+ * the same has not been cleaned up by the shim
+ */
+ if (bfa_itnim == NULL) {
+ bfa_tskim_free(tskim);
+ BFA_LOG(KERN_ERR, bfad, bfa_log_level,
+ "lun reset, bfa_itnim is NULL\n");
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+ rc = FAILED;
+ goto out;
+ }
int_to_scsilun(cmnd->device->lun, &scsilun);
bfa_tskim_start(tskim, bfa_itnim, scsilun,
FCP_TM_LUN_RESET, BFAD_LUN_RESET_TMO);
diff --git a/drivers/scsi/bfa/bfad_im.h b/drivers/scsi/bfa/bfad_im.h
index f6c1023e502a..836fdc221edd 100644
--- a/drivers/scsi/bfa/bfad_im.h
+++ b/drivers/scsi/bfa/bfad_im.h
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
diff --git a/drivers/scsi/bfa/bfi.h b/drivers/scsi/bfa/bfi.h
index 9ef91f907dec..97600dcec649 100644
--- a/drivers/scsi/bfa/bfi.h
+++ b/drivers/scsi/bfa/bfi.h
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
diff --git a/drivers/scsi/bfa/bfi_ms.h b/drivers/scsi/bfa/bfi_ms.h
index 1a3fe5ad58fa..ae5bfe039fcc 100644
--- a/drivers/scsi/bfa/bfi_ms.h
+++ b/drivers/scsi/bfa/bfi_ms.h
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
diff --git a/drivers/scsi/bfa/bfi_reg.h b/drivers/scsi/bfa/bfi_reg.h
index 99133bcf53f9..fd5b87616e8b 100644
--- a/drivers/scsi/bfa/bfi_reg.h
+++ b/drivers/scsi/bfa/bfi_reg.h
@@ -1,9 +1,10 @@
/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
+ * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
+ * Copyright (c) 2014- QLogic Corporation.
* All rights reserved
- * www.brocade.com
+ * www.qlogic.com
*
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License (GPL) Version 2 as
@@ -16,7 +17,7 @@
*/
/*
- * bfi_reg.h ASIC register defines for all Brocade adapter ASICs
+ * bfi_reg.h ASIC register defines for all QLogic BR-series adapter ASICs
*/
#ifndef __BFI_REG_H__
diff --git a/drivers/scsi/cxlflash/common.h b/drivers/scsi/cxlflash/common.h
index c11cd193f896..5ada9268a450 100644
--- a/drivers/scsi/cxlflash/common.h
+++ b/drivers/scsi/cxlflash/common.h
@@ -165,6 +165,8 @@ struct afu {
struct sisl_host_map __iomem *host_map; /* MC host map */
struct sisl_ctrl_map __iomem *ctrl_map; /* MC control map */
+ struct kref mapcount;
+
ctx_hndl_t ctx_hndl; /* master's context handle */
u64 *hrrq_start;
u64 *hrrq_end;
diff --git a/drivers/scsi/cxlflash/main.c b/drivers/scsi/cxlflash/main.c
index 1e5bf0ca81da..f6d90ce8f3b7 100644
--- a/drivers/scsi/cxlflash/main.c
+++ b/drivers/scsi/cxlflash/main.c
@@ -368,6 +368,7 @@ out:
no_room:
afu->read_room = true;
+ kref_get(&cfg->afu->mapcount);
schedule_work(&cfg->work_q);
rc = SCSI_MLQUEUE_HOST_BUSY;
goto out;
@@ -473,6 +474,16 @@ out:
return rc;
}
+static void afu_unmap(struct kref *ref)
+{
+ struct afu *afu = container_of(ref, struct afu, mapcount);
+
+ if (likely(afu->afu_map)) {
+ cxl_psa_unmap((void __iomem *)afu->afu_map);
+ afu->afu_map = NULL;
+ }
+}
+
/**
* cxlflash_driver_info() - information handler for this host driver
* @host: SCSI host associated with device.
@@ -503,6 +514,7 @@ static int cxlflash_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scp)
ulong lock_flags;
short lflag = 0;
int rc = 0;
+ int kref_got = 0;
dev_dbg_ratelimited(dev, "%s: (scp=%p) %d/%d/%d/%llu "
"cdb=(%08X-%08X-%08X-%08X)\n",
@@ -547,6 +559,9 @@ static int cxlflash_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scp)
goto out;
}
+ kref_get(&cfg->afu->mapcount);
+ kref_got = 1;
+
cmd->rcb.ctx_id = afu->ctx_hndl;
cmd->rcb.port_sel = port_sel;
cmd->rcb.lun_id = lun_to_lunid(scp->device->lun);
@@ -587,6 +602,8 @@ static int cxlflash_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scp)
}
out:
+ if (kref_got)
+ kref_put(&afu->mapcount, afu_unmap);
pr_devel("%s: returning rc=%d\n", __func__, rc);
return rc;
}
@@ -632,20 +649,36 @@ static void free_mem(struct cxlflash_cfg *cfg)
* @cfg: Internal structure associated with the host.
*
* Safe to call with AFU in a partially allocated/initialized state.
+ *
+ * Cleans up all state associated with the command queue, and unmaps
+ * the MMIO space.
+ *
+ * - complete() will take care of commands we initiated (they'll be checked
+ * in as part of the cleanup that occurs after the completion)
+ *
+ * - cmd_checkin() will take care of entries that we did not initiate and that
+ * have not (and will not) complete because they are sitting on a [now stale]
+ * hardware queue
*/
static void stop_afu(struct cxlflash_cfg *cfg)
{
int i;
struct afu *afu = cfg->afu;
+ struct afu_cmd *cmd;
if (likely(afu)) {
- for (i = 0; i < CXLFLASH_NUM_CMDS; i++)
- complete(&afu->cmd[i].cevent);
+ for (i = 0; i < CXLFLASH_NUM_CMDS; i++) {
+ cmd = &afu->cmd[i];
+ complete(&cmd->cevent);
+ if (!atomic_read(&cmd->free))
+ cmd_checkin(cmd);
+ }
if (likely(afu->afu_map)) {
cxl_psa_unmap((void __iomem *)afu->afu_map);
afu->afu_map = NULL;
}
+ kref_put(&afu->mapcount, afu_unmap);
}
}
@@ -731,8 +764,8 @@ static void cxlflash_remove(struct pci_dev *pdev)
scsi_remove_host(cfg->host);
/* fall through */
case INIT_STATE_AFU:
- term_afu(cfg);
cancel_work_sync(&cfg->work_q);
+ term_afu(cfg);
case INIT_STATE_PCI:
pci_release_regions(cfg->dev);
pci_disable_device(pdev);
@@ -1108,7 +1141,7 @@ static const struct asyc_intr_info ainfo[] = {
{SISL_ASTATUS_FC1_OTHER, "other error", 1, CLR_FC_ERROR | LINK_RESET},
{SISL_ASTATUS_FC1_LOGO, "target initiated LOGO", 1, 0},
{SISL_ASTATUS_FC1_CRC_T, "CRC threshold exceeded", 1, LINK_RESET},
- {SISL_ASTATUS_FC1_LOGI_R, "login timed out, retrying", 1, 0},
+ {SISL_ASTATUS_FC1_LOGI_R, "login timed out, retrying", 1, LINK_RESET},
{SISL_ASTATUS_FC1_LOGI_F, "login failed", 1, CLR_FC_ERROR},
{SISL_ASTATUS_FC1_LOGI_S, "login succeeded", 1, SCAN_HOST},
{SISL_ASTATUS_FC1_LINK_DN, "link down", 1, 0},
@@ -1316,6 +1349,7 @@ static irqreturn_t cxlflash_async_err_irq(int irq, void *data)
__func__, port);
cfg->lr_state = LINK_RESET_REQUIRED;
cfg->lr_port = port;
+ kref_get(&cfg->afu->mapcount);
schedule_work(&cfg->work_q);
}
@@ -1336,6 +1370,7 @@ static irqreturn_t cxlflash_async_err_irq(int irq, void *data)
if (info->action & SCAN_HOST) {
atomic_inc(&cfg->scan_host_needed);
+ kref_get(&cfg->afu->mapcount);
schedule_work(&cfg->work_q);
}
}
@@ -1731,6 +1766,7 @@ static int init_afu(struct cxlflash_cfg *cfg)
rc = -ENOMEM;
goto err1;
}
+ kref_init(&afu->mapcount);
/* No byte reverse on reading afu_version or string will be backwards */
reg = readq(&afu->afu_map->global.regs.afu_version);
@@ -1765,8 +1801,7 @@ out:
return rc;
err2:
- cxl_psa_unmap((void __iomem *)afu->afu_map);
- afu->afu_map = NULL;
+ kref_put(&afu->mapcount, afu_unmap);
err1:
term_mc(cfg, UNDO_START);
goto out;
@@ -2274,6 +2309,7 @@ static struct scsi_host_template driver_template = {
* Device dependent values
*/
static struct dev_dependent_vals dev_corsa_vals = { CXLFLASH_MAX_SECTORS };
+static struct dev_dependent_vals dev_flash_gt_vals = { CXLFLASH_MAX_SECTORS };
/*
* PCI device binding table
@@ -2281,6 +2317,8 @@ static struct dev_dependent_vals dev_corsa_vals = { CXLFLASH_MAX_SECTORS };
static struct pci_device_id cxlflash_pci_table[] = {
{PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CORSA,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, (kernel_ulong_t)&dev_corsa_vals},
+ {PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_FLASH_GT,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, (kernel_ulong_t)&dev_flash_gt_vals},
{}
};
@@ -2339,6 +2377,7 @@ static void cxlflash_worker_thread(struct work_struct *work)
if (atomic_dec_if_positive(&cfg->scan_host_needed) >= 0)
scsi_scan_host(cfg->host);
+ kref_put(&afu->mapcount, afu_unmap);
}
/**
@@ -2585,8 +2624,7 @@ static struct pci_driver cxlflash_driver = {
*/
static int __init init_cxlflash(void)
{
- pr_info("%s: IBM Power CXL Flash Adapter: %s\n",
- __func__, CXLFLASH_DRIVER_DATE);
+ pr_info("%s: %s\n", __func__, CXLFLASH_ADAPTER_NAME);
cxlflash_list_init();
diff --git a/drivers/scsi/cxlflash/main.h b/drivers/scsi/cxlflash/main.h
index 60324566c14f..0faed422c7f4 100644
--- a/drivers/scsi/cxlflash/main.h
+++ b/drivers/scsi/cxlflash/main.h
@@ -22,10 +22,9 @@
#define CXLFLASH_NAME "cxlflash"
#define CXLFLASH_ADAPTER_NAME "IBM POWER CXL Flash Adapter"
-#define CXLFLASH_DRIVER_DATE "(August 13, 2015)"
-#define PCI_DEVICE_ID_IBM_CORSA 0x04F0
-#define CXLFLASH_SUBS_DEV_ID 0x04F0
+#define PCI_DEVICE_ID_IBM_CORSA 0x04F0
+#define PCI_DEVICE_ID_IBM_FLASH_GT 0x0600
/* Since there is only one target, make it 0 */
#define CXLFLASH_TARGET 0
diff --git a/drivers/scsi/cxlflash/superpipe.c b/drivers/scsi/cxlflash/superpipe.c
index cac2e6a50efd..f4020dbb55c3 100644
--- a/drivers/scsi/cxlflash/superpipe.c
+++ b/drivers/scsi/cxlflash/superpipe.c
@@ -1372,7 +1372,7 @@ static int cxlflash_disk_attach(struct scsi_device *sdev,
}
ctx = cxl_dev_context_init(cfg->dev);
- if (unlikely(IS_ERR_OR_NULL(ctx))) {
+ if (IS_ERR_OR_NULL(ctx)) {
dev_err(dev, "%s: Could not initialize context %p\n",
__func__, ctx);
rc = -ENODEV;
@@ -1380,7 +1380,7 @@ static int cxlflash_disk_attach(struct scsi_device *sdev,
}
ctxid = cxl_process_element(ctx);
- if (unlikely((ctxid > MAX_CONTEXT) || (ctxid < 0))) {
+ if (unlikely((ctxid >= MAX_CONTEXT) || (ctxid < 0))) {
dev_err(dev, "%s: ctxid (%d) invalid!\n", __func__, ctxid);
rc = -EPERM;
goto err2;
@@ -1500,7 +1500,7 @@ static int recover_context(struct cxlflash_cfg *cfg, struct ctx_info *ctxi)
struct afu *afu = cfg->afu;
ctx = cxl_dev_context_init(cfg->dev);
- if (unlikely(IS_ERR_OR_NULL(ctx))) {
+ if (IS_ERR_OR_NULL(ctx)) {
dev_err(dev, "%s: Could not initialize context %p\n",
__func__, ctx);
rc = -ENODEV;
@@ -1508,7 +1508,7 @@ static int recover_context(struct cxlflash_cfg *cfg, struct ctx_info *ctxi)
}
ctxid = cxl_process_element(ctx);
- if (unlikely((ctxid > MAX_CONTEXT) || (ctxid < 0))) {
+ if (unlikely((ctxid >= MAX_CONTEXT) || (ctxid < 0))) {
dev_err(dev, "%s: ctxid (%d) invalid!\n", __func__, ctxid);
rc = -EPERM;
goto err1;
diff --git a/drivers/scsi/cxlflash/vlun.c b/drivers/scsi/cxlflash/vlun.c
index a53f583e2d7b..50f8e9300770 100644
--- a/drivers/scsi/cxlflash/vlun.c
+++ b/drivers/scsi/cxlflash/vlun.c
@@ -1008,6 +1008,8 @@ int cxlflash_disk_virtual_open(struct scsi_device *sdev, void *arg)
virt->last_lba = last_lba;
virt->rsrc_handle = rsrc_handle;
+ if (lli->port_sel == BOTH_PORTS)
+ virt->hdr.return_flags |= DK_CXLFLASH_ALL_PORTS_ACTIVE;
out:
if (likely(ctxi))
put_context(ctxi);
diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index cc2773b5de68..5a328bf81836 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -22,7 +22,9 @@
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/module.h>
+#include <asm/unaligned.h>
#include <scsi/scsi.h>
+#include <scsi/scsi_dbg.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_dh.h>
@@ -58,8 +60,9 @@
#define ALUA_FAILOVER_TIMEOUT 60
#define ALUA_FAILOVER_RETRIES 5
-/* flags passed from user level */
+/* device handler flags */
#define ALUA_OPTIMIZE_STPG 1
+#define ALUA_RTPG_EXT_HDR_UNSUPP 2
struct alua_dh_data {
int group_id;
@@ -73,7 +76,6 @@ struct alua_dh_data {
int bufflen;
unsigned char transition_tmo;
unsigned char sense[SCSI_SENSE_BUFFERSIZE];
- int senselen;
struct scsi_device *sdev;
activate_complete callback_fn;
void *callback_data;
@@ -83,7 +85,6 @@ struct alua_dh_data {
#define ALUA_POLICY_SWITCH_ALL 1
static char print_alua_state(int);
-static int alua_check_sense(struct scsi_device *, struct scsi_sense_hdr *);
static int realloc_buffer(struct alua_dh_data *h, unsigned len)
{
@@ -131,93 +132,47 @@ static struct request *get_alua_req(struct scsi_device *sdev,
}
/*
- * submit_vpd_inquiry - Issue an INQUIRY VPD page 0x83 command
- * @sdev: sdev the command should be sent to
- */
-static int submit_vpd_inquiry(struct scsi_device *sdev, struct alua_dh_data *h)
-{
- struct request *rq;
- int err = SCSI_DH_RES_TEMP_UNAVAIL;
-
- rq = get_alua_req(sdev, h->buff, h->bufflen, READ);
- if (!rq)
- goto done;
-
- /* Prepare the command. */
- rq->cmd[0] = INQUIRY;
- rq->cmd[1] = 1;
- rq->cmd[2] = 0x83;
- rq->cmd[4] = h->bufflen;
- rq->cmd_len = COMMAND_SIZE(INQUIRY);
-
- rq->sense = h->sense;
- memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
- rq->sense_len = h->senselen = 0;
-
- err = blk_execute_rq(rq->q, NULL, rq, 1);
- if (err == -EIO) {
- sdev_printk(KERN_INFO, sdev,
- "%s: evpd inquiry failed with %x\n",
- ALUA_DH_NAME, rq->errors);
- h->senselen = rq->sense_len;
- err = SCSI_DH_IO;
- }
- blk_put_request(rq);
-done:
- return err;
-}
-
-/*
* submit_rtpg - Issue a REPORT TARGET GROUP STATES command
* @sdev: sdev the command should be sent to
*/
-static unsigned submit_rtpg(struct scsi_device *sdev, struct alua_dh_data *h,
- bool rtpg_ext_hdr_req)
+static unsigned submit_rtpg(struct scsi_device *sdev, struct alua_dh_data *h)
{
struct request *rq;
- int err = SCSI_DH_RES_TEMP_UNAVAIL;
+ int err = 0;
rq = get_alua_req(sdev, h->buff, h->bufflen, READ);
- if (!rq)
+ if (!rq) {
+ err = DRIVER_BUSY << 24;
goto done;
+ }
/* Prepare the command. */
rq->cmd[0] = MAINTENANCE_IN;
- if (rtpg_ext_hdr_req)
+ if (!(h->flags & ALUA_RTPG_EXT_HDR_UNSUPP))
rq->cmd[1] = MI_REPORT_TARGET_PGS | MI_EXT_HDR_PARAM_FMT;
else
rq->cmd[1] = MI_REPORT_TARGET_PGS;
- rq->cmd[6] = (h->bufflen >> 24) & 0xff;
- rq->cmd[7] = (h->bufflen >> 16) & 0xff;
- rq->cmd[8] = (h->bufflen >> 8) & 0xff;
- rq->cmd[9] = h->bufflen & 0xff;
+ put_unaligned_be32(h->bufflen, &rq->cmd[6]);
rq->cmd_len = COMMAND_SIZE(MAINTENANCE_IN);
rq->sense = h->sense;
memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
- rq->sense_len = h->senselen = 0;
+ rq->sense_len = 0;
- err = blk_execute_rq(rq->q, NULL, rq, 1);
- if (err == -EIO) {
- sdev_printk(KERN_INFO, sdev,
- "%s: rtpg failed with %x\n",
- ALUA_DH_NAME, rq->errors);
- h->senselen = rq->sense_len;
- err = SCSI_DH_IO;
- }
+ blk_execute_rq(rq->q, NULL, rq, 1);
+ if (rq->errors)
+ err = rq->errors;
blk_put_request(rq);
done:
return err;
}
/*
- * alua_stpg - Evaluate SET TARGET GROUP STATES
+ * stpg_endio - Evaluate SET TARGET GROUP STATES
* @sdev: the device to be evaluated
* @state: the new target group state
*
- * Send a SET TARGET GROUP STATES command to the device.
- * We only have to test here if we should resubmit the command;
- * any other error is assumed as a failure.
+ * Evaluate a SET TARGET GROUP STATES command response.
*/
static void stpg_endio(struct request *req, int error)
{
@@ -231,22 +186,21 @@ static void stpg_endio(struct request *req, int error)
goto done;
}
- if (req->sense_len > 0) {
- err = scsi_normalize_sense(h->sense, SCSI_SENSE_BUFFERSIZE,
- &sense_hdr);
- if (!err) {
- err = SCSI_DH_IO;
+ if (scsi_normalize_sense(h->sense, SCSI_SENSE_BUFFERSIZE,
+ &sense_hdr)) {
+ if (sense_hdr.sense_key == NOT_READY &&
+ sense_hdr.asc == 0x04 && sense_hdr.ascq == 0x0a) {
+ /* ALUA state transition already in progress */
+ err = SCSI_DH_OK;
goto done;
}
- err = alua_check_sense(h->sdev, &sense_hdr);
- if (err == ADD_TO_MLQUEUE) {
+ if (sense_hdr.sense_key == UNIT_ATTENTION) {
err = SCSI_DH_RETRY;
goto done;
}
- sdev_printk(KERN_INFO, h->sdev,
- "%s: stpg sense code: %02x/%02x/%02x\n",
- ALUA_DH_NAME, sense_hdr.sense_key,
- sense_hdr.asc, sense_hdr.ascq);
+ sdev_printk(KERN_INFO, h->sdev, "%s: stpg failed\n",
+ ALUA_DH_NAME);
+ scsi_print_sense_hdr(h->sdev, ALUA_DH_NAME, &sense_hdr);
err = SCSI_DH_IO;
} else if (error)
err = SCSI_DH_IO;
@@ -284,8 +238,7 @@ static unsigned submit_stpg(struct alua_dh_data *h)
/* Prepare the data buffer */
memset(h->buff, 0, stpg_len);
h->buff[4] = TPGS_STATE_OPTIMIZED & 0x0f;
- h->buff[6] = (h->group_id >> 8) & 0xff;
- h->buff[7] = h->group_id & 0xff;
+ put_unaligned_be16(h->group_id, &h->buff[6]);
rq = get_alua_req(sdev, h->buff, stpg_len, WRITE);
if (!rq)
@@ -294,15 +247,12 @@ static unsigned submit_stpg(struct alua_dh_data *h)
/* Prepare the command. */
rq->cmd[0] = MAINTENANCE_OUT;
rq->cmd[1] = MO_SET_TARGET_PGS;
- rq->cmd[6] = (stpg_len >> 24) & 0xff;
- rq->cmd[7] = (stpg_len >> 16) & 0xff;
- rq->cmd[8] = (stpg_len >> 8) & 0xff;
- rq->cmd[9] = stpg_len & 0xff;
+ put_unaligned_be32(stpg_len, &rq->cmd[6]);
rq->cmd_len = COMMAND_SIZE(MAINTENANCE_OUT);
rq->sense = h->sense;
memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
- rq->sense_len = h->senselen = 0;
+ rq->sense_len = 0;
rq->end_io_data = h;
blk_execute_rq_nowait(rq->q, NULL, rq, 1, stpg_endio);
@@ -316,12 +266,23 @@ static unsigned submit_stpg(struct alua_dh_data *h)
* Examine the TPGS setting of the sdev to find out if ALUA
* is supported.
*/
-static int alua_check_tpgs(struct scsi_device *sdev, struct alua_dh_data *h)
+static int alua_check_tpgs(struct scsi_device *sdev)
{
- int err = SCSI_DH_OK;
+ int tpgs = TPGS_MODE_NONE;
+
+ /*
+ * ALUA support for non-disk devices is fraught with
+ * difficulties, so disable it for now.
+ */
+ if (sdev->type != TYPE_DISK) {
+ sdev_printk(KERN_INFO, sdev,
+ "%s: disable for non-disk devices\n",
+ ALUA_DH_NAME);
+ return tpgs;
+ }
- h->tpgs = scsi_device_tpgs(sdev);
- switch (h->tpgs) {
+ tpgs = scsi_device_tpgs(sdev);
+ switch (tpgs) {
case TPGS_MODE_EXPLICIT|TPGS_MODE_IMPLICIT:
sdev_printk(KERN_INFO, sdev,
"%s: supports implicit and explicit TPGS\n",
@@ -335,71 +296,34 @@ static int alua_check_tpgs(struct scsi_device *sdev, struct alua_dh_data *h)
sdev_printk(KERN_INFO, sdev, "%s: supports implicit TPGS\n",
ALUA_DH_NAME);
break;
- default:
- h->tpgs = TPGS_MODE_NONE;
+ case TPGS_MODE_NONE:
sdev_printk(KERN_INFO, sdev, "%s: not supported\n",
ALUA_DH_NAME);
- err = SCSI_DH_DEV_UNSUPP;
+ break;
+ default:
+ sdev_printk(KERN_INFO, sdev,
+ "%s: unsupported TPGS setting %d\n",
+ ALUA_DH_NAME, tpgs);
+ tpgs = TPGS_MODE_NONE;
break;
}
- return err;
+ return tpgs;
}
/*
- * alua_vpd_inquiry - Evaluate INQUIRY vpd page 0x83
+ * alua_check_vpd - Evaluate INQUIRY vpd page 0x83
* @sdev: device to be checked
*
* Extract the relative target port and the target port group
* descriptor from the list of identificators.
*/
-static int alua_vpd_inquiry(struct scsi_device *sdev, struct alua_dh_data *h)
+static int alua_check_vpd(struct scsi_device *sdev, struct alua_dh_data *h)
{
- int len;
- unsigned err;
- unsigned char *d;
-
- retry:
- err = submit_vpd_inquiry(sdev, h);
-
- if (err != SCSI_DH_OK)
- return err;
-
- /* Check if vpd page exceeds initial buffer */
- len = (h->buff[2] << 8) + h->buff[3] + 4;
- if (len > h->bufflen) {
- /* Resubmit with the correct length */
- if (realloc_buffer(h, len)) {
- sdev_printk(KERN_WARNING, sdev,
- "%s: kmalloc buffer failed\n",
- ALUA_DH_NAME);
- /* Temporary failure, bypass */
- return SCSI_DH_DEV_TEMP_BUSY;
- }
- goto retry;
- }
+ int rel_port = -1, group_id;
- /*
- * Now look for the correct descriptor.
- */
- d = h->buff + 4;
- while (d < h->buff + len) {
- switch (d[1] & 0xf) {
- case 0x4:
- /* Relative target port */
- h->rel_port = (d[6] << 8) + d[7];
- break;
- case 0x5:
- /* Target port group */
- h->group_id = (d[6] << 8) + d[7];
- break;
- default:
- break;
- }
- d += d[3] + 4;
- }
-
- if (h->group_id == -1) {
+ group_id = scsi_vpd_tpg_id(sdev, &rel_port);
+ if (group_id < 0) {
/*
* Internal error; TPGS supported but required
* VPD identification descriptors not present.
@@ -408,16 +332,16 @@ static int alua_vpd_inquiry(struct scsi_device *sdev, struct alua_dh_data *h)
sdev_printk(KERN_INFO, sdev,
"%s: No target port descriptors found\n",
ALUA_DH_NAME);
- h->state = TPGS_STATE_OPTIMIZED;
- h->tpgs = TPGS_MODE_NONE;
- err = SCSI_DH_DEV_UNSUPP;
- } else {
- sdev_printk(KERN_INFO, sdev,
- "%s: port group %02x rel port %02x\n",
- ALUA_DH_NAME, h->group_id, h->rel_port);
+ return SCSI_DH_DEV_UNSUPP;
}
+ h->state = TPGS_STATE_OPTIMIZED;
+ h->group_id = group_id;
- return err;
+ sdev_printk(KERN_INFO, sdev,
+ "%s: port group %02x rel port %02x\n",
+ ALUA_DH_NAME, h->group_id, h->rel_port);
+
+ return 0;
}
static char print_alua_state(int state)
@@ -452,28 +376,6 @@ static int alua_check_sense(struct scsi_device *sdev,
* LUN Not Accessible - ALUA state transition
*/
return ADD_TO_MLQUEUE;
- if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0b)
- /*
- * LUN Not Accessible -- Target port in standby state
- */
- return SUCCESS;
- if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0c)
- /*
- * LUN Not Accessible -- Target port in unavailable state
- */
- return SUCCESS;
- if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x12)
- /*
- * LUN Not Ready -- Offline
- */
- return SUCCESS;
- if (sdev->allow_restart &&
- sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x02)
- /*
- * if the device is not started, we need to wake
- * the error handler to start the motor
- */
- return FAILED;
break;
case UNIT_ATTENTION:
if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00)
@@ -533,8 +435,7 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_dh_data *h, int wait_
struct scsi_sense_hdr sense_hdr;
int len, k, off, valid_states = 0;
unsigned char *ucp;
- unsigned err;
- bool rtpg_ext_hdr_req = 1;
+ unsigned err, retval;
unsigned long expiry, interval = 0;
unsigned int tpg_desc_tbl_off;
unsigned char orig_transition_tmo;
@@ -545,13 +446,17 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_dh_data *h, int wait_
expiry = round_jiffies_up(jiffies + h->transition_tmo * HZ);
retry:
- err = submit_rtpg(sdev, h, rtpg_ext_hdr_req);
-
- if (err == SCSI_DH_IO && h->senselen > 0) {
- err = scsi_normalize_sense(h->sense, SCSI_SENSE_BUFFERSIZE,
- &sense_hdr);
- if (!err)
+ retval = submit_rtpg(sdev, h);
+ if (retval) {
+ if (!scsi_normalize_sense(h->sense, SCSI_SENSE_BUFFERSIZE,
+ &sense_hdr)) {
+ sdev_printk(KERN_INFO, sdev,
+ "%s: rtpg failed, result %d\n",
+ ALUA_DH_NAME, retval);
+ if (driver_byte(retval) == DRIVER_BUSY)
+ return SCSI_DH_DEV_TEMP_BUSY;
return SCSI_DH_IO;
+ }
/*
* submit_rtpg() has failed on existing arrays
@@ -561,27 +466,34 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_dh_data *h, int wait_
* The retry without rtpg_ext_hdr_req set
* handles this.
*/
- if (rtpg_ext_hdr_req == 1 &&
+ if (!(h->flags & ALUA_RTPG_EXT_HDR_UNSUPP) &&
sense_hdr.sense_key == ILLEGAL_REQUEST &&
sense_hdr.asc == 0x24 && sense_hdr.ascq == 0) {
- rtpg_ext_hdr_req = 0;
+ h->flags |= ALUA_RTPG_EXT_HDR_UNSUPP;
goto retry;
}
-
- err = alua_check_sense(sdev, &sense_hdr);
- if (err == ADD_TO_MLQUEUE && time_before(jiffies, expiry))
+ /*
+ * Retry on ALUA state transition or if any
+ * UNIT ATTENTION occurred.
+ */
+ if (sense_hdr.sense_key == NOT_READY &&
+ sense_hdr.asc == 0x04 && sense_hdr.ascq == 0x0a)
+ err = SCSI_DH_RETRY;
+ else if (sense_hdr.sense_key == UNIT_ATTENTION)
+ err = SCSI_DH_RETRY;
+ if (err == SCSI_DH_RETRY && time_before(jiffies, expiry)) {
+ sdev_printk(KERN_ERR, sdev, "%s: rtpg retry\n",
+ ALUA_DH_NAME);
+ scsi_print_sense_hdr(sdev, ALUA_DH_NAME, &sense_hdr);
goto retry;
- sdev_printk(KERN_INFO, sdev,
- "%s: rtpg sense code %02x/%02x/%02x\n",
- ALUA_DH_NAME, sense_hdr.sense_key,
- sense_hdr.asc, sense_hdr.ascq);
- err = SCSI_DH_IO;
+ }
+ sdev_printk(KERN_ERR, sdev, "%s: rtpg failed\n",
+ ALUA_DH_NAME);
+ scsi_print_sense_hdr(sdev, ALUA_DH_NAME, &sense_hdr);
+ return SCSI_DH_IO;
}
- if (err != SCSI_DH_OK)
- return err;
- len = (h->buff[0] << 24) + (h->buff[1] << 16) +
- (h->buff[2] << 8) + h->buff[3] + 4;
+ len = get_unaligned_be32(&h->buff[0]) + 4;
if (len > h->bufflen) {
/* Resubmit with the correct length */
@@ -616,7 +528,7 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_dh_data *h, int wait_
k < len;
k += off, ucp += off) {
- if (h->group_id == (ucp[2] << 8) + ucp[3]) {
+ if (h->group_id == get_unaligned_be16(&ucp[2])) {
h->state = ucp[0] & 0x0f;
h->pref = ucp[0] >> 7;
valid_states = ucp[1];
@@ -674,13 +586,13 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_dh_data *h, int wait_
*/
static int alua_initialize(struct scsi_device *sdev, struct alua_dh_data *h)
{
- int err;
+ int err = SCSI_DH_DEV_UNSUPP;
- err = alua_check_tpgs(sdev, h);
- if (err != SCSI_DH_OK)
+ h->tpgs = alua_check_tpgs(sdev);
+ if (h->tpgs == TPGS_MODE_NONE)
goto out;
- err = alua_vpd_inquiry(sdev, h);
+ err = alua_check_vpd(sdev, h);
if (err != SCSI_DH_OK)
goto out;
diff --git a/drivers/scsi/hisi_sas/Kconfig b/drivers/scsi/hisi_sas/Kconfig
new file mode 100644
index 000000000000..37a0c7156087
--- /dev/null
+++ b/drivers/scsi/hisi_sas/Kconfig
@@ -0,0 +1,6 @@
+config SCSI_HISI_SAS
+ tristate "HiSilicon SAS"
+ select SCSI_SAS_LIBSAS
+ select BLK_DEV_INTEGRITY
+ help
+ This driver supports HiSilicon's SAS HBA
diff --git a/drivers/scsi/hisi_sas/Makefile b/drivers/scsi/hisi_sas/Makefile
new file mode 100644
index 000000000000..3e70eae81343
--- /dev/null
+++ b/drivers/scsi/hisi_sas/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_SCSI_HISI_SAS) += hisi_sas_main.o
+obj-$(CONFIG_SCSI_HISI_SAS) += hisi_sas_v1_hw.o
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
new file mode 100644
index 000000000000..5af2e4187f01
--- /dev/null
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -0,0 +1,341 @@
+/*
+ * Copyright (c) 2015 Linaro Ltd.
+ * Copyright (c) 2015 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef _HISI_SAS_H_
+#define _HISI_SAS_H_
+
+#include <linux/dmapool.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <scsi/libsas.h>
+
+#define DRV_VERSION "v1.0"
+
+#define HISI_SAS_MAX_PHYS 9
+#define HISI_SAS_MAX_QUEUES 32
+#define HISI_SAS_QUEUE_SLOTS 512
+#define HISI_SAS_MAX_ITCT_ENTRIES 4096
+#define HISI_SAS_MAX_DEVICES HISI_SAS_MAX_ITCT_ENTRIES
+#define HISI_SAS_COMMAND_ENTRIES 8192
+
+#define HISI_SAS_STATUS_BUF_SZ \
+ (sizeof(struct hisi_sas_err_record) + 1024)
+#define HISI_SAS_COMMAND_TABLE_SZ \
+ (((sizeof(union hisi_sas_command_table)+3)/4)*4)
+
+#define HISI_SAS_MAX_SSP_RESP_SZ (sizeof(struct ssp_frame_hdr) + 1024)
+#define HISI_SAS_MAX_SMP_RESP_SZ 1028
+
+struct hisi_hba;
+
+enum {
+ PORT_TYPE_SAS = (1U << 1),
+ PORT_TYPE_SATA = (1U << 0),
+};
+
+enum dev_status {
+ HISI_SAS_DEV_NORMAL,
+ HISI_SAS_DEV_EH,
+};
+
+enum hisi_sas_dev_type {
+ HISI_SAS_DEV_TYPE_STP = 0,
+ HISI_SAS_DEV_TYPE_SSP,
+ HISI_SAS_DEV_TYPE_SATA,
+};
+
+struct hisi_sas_phy {
+ struct hisi_hba *hisi_hba;
+ struct hisi_sas_port *port;
+ struct asd_sas_phy sas_phy;
+ struct sas_identify identify;
+ struct timer_list timer;
+ struct work_struct phyup_ws;
+ u64 port_id; /* from hw */
+ u64 dev_sas_addr;
+ u64 phy_type;
+ u64 frame_rcvd_size;
+ u8 frame_rcvd[32];
+ u8 phy_attached;
+ u8 reserved[3];
+ enum sas_linkrate minimum_linkrate;
+ enum sas_linkrate maximum_linkrate;
+};
+
+struct hisi_sas_port {
+ struct asd_sas_port sas_port;
+ u8 port_attached;
+ u8 id; /* from hw */
+ struct list_head list;
+};
+
+struct hisi_sas_cq {
+ struct hisi_hba *hisi_hba;
+ int id;
+};
+
+struct hisi_sas_device {
+ enum sas_device_type dev_type;
+ struct hisi_hba *hisi_hba;
+ struct domain_device *sas_device;
+ u64 attached_phy;
+ u64 device_id;
+ u64 running_req;
+ u8 dev_status;
+};
+
+struct hisi_sas_slot {
+ struct list_head entry;
+ struct sas_task *task;
+ struct hisi_sas_port *port;
+ u64 n_elem;
+ int dlvry_queue;
+ int dlvry_queue_slot;
+ int cmplt_queue;
+ int cmplt_queue_slot;
+ int idx;
+ void *cmd_hdr;
+ dma_addr_t cmd_hdr_dma;
+ void *status_buffer;
+ dma_addr_t status_buffer_dma;
+ void *command_table;
+ dma_addr_t command_table_dma;
+ struct hisi_sas_sge_page *sge_page;
+ dma_addr_t sge_page_dma;
+};
+
+struct hisi_sas_tmf_task {
+ u8 tmf;
+ u16 tag_of_task_to_be_managed;
+};
+
+struct hisi_sas_hw {
+ int (*hw_init)(struct hisi_hba *hisi_hba);
+ void (*setup_itct)(struct hisi_hba *hisi_hba,
+ struct hisi_sas_device *device);
+ void (*sl_notify)(struct hisi_hba *hisi_hba, int phy_no);
+ int (*get_free_slot)(struct hisi_hba *hisi_hba, int *q, int *s);
+ void (*start_delivery)(struct hisi_hba *hisi_hba);
+ int (*prep_ssp)(struct hisi_hba *hisi_hba,
+ struct hisi_sas_slot *slot, int is_tmf,
+ struct hisi_sas_tmf_task *tmf);
+ int (*prep_smp)(struct hisi_hba *hisi_hba,
+ struct hisi_sas_slot *slot);
+ int (*slot_complete)(struct hisi_hba *hisi_hba,
+ struct hisi_sas_slot *slot, int abort);
+ void (*phy_enable)(struct hisi_hba *hisi_hba, int phy_no);
+ void (*phy_disable)(struct hisi_hba *hisi_hba, int phy_no);
+ void (*phy_hard_reset)(struct hisi_hba *hisi_hba, int phy_no);
+ void (*free_device)(struct hisi_hba *hisi_hba,
+ struct hisi_sas_device *dev);
+ int (*get_wideport_bitmap)(struct hisi_hba *hisi_hba, int port_id);
+ int complete_hdr_size;
+};
+
+struct hisi_hba {
+ /* This must be the first element, used by SHOST_TO_SAS_HA */
+ struct sas_ha_struct *p;
+
+ struct platform_device *pdev;
+ void __iomem *regs;
+ struct regmap *ctrl;
+ u32 ctrl_reset_reg;
+ u32 ctrl_reset_sts_reg;
+ u32 ctrl_clock_ena_reg;
+ u8 sas_addr[SAS_ADDR_SIZE];
+
+ int n_phy;
+ int scan_finished;
+ spinlock_t lock;
+
+ struct timer_list timer;
+ struct workqueue_struct *wq;
+
+ int slot_index_count;
+ unsigned long *slot_index_tags;
+
+ /* SCSI/SAS glue */
+ struct sas_ha_struct sha;
+ struct Scsi_Host *shost;
+
+ struct hisi_sas_cq cq[HISI_SAS_MAX_QUEUES];
+ struct hisi_sas_phy phy[HISI_SAS_MAX_PHYS];
+ struct hisi_sas_port port[HISI_SAS_MAX_PHYS];
+
+ int queue_count;
+ int queue;
+ struct hisi_sas_slot *slot_prep;
+
+ struct dma_pool *sge_page_pool;
+ struct hisi_sas_device devices[HISI_SAS_MAX_DEVICES];
+ struct dma_pool *command_table_pool;
+ struct dma_pool *status_buffer_pool;
+ struct hisi_sas_cmd_hdr *cmd_hdr[HISI_SAS_MAX_QUEUES];
+ dma_addr_t cmd_hdr_dma[HISI_SAS_MAX_QUEUES];
+ void *complete_hdr[HISI_SAS_MAX_QUEUES];
+ dma_addr_t complete_hdr_dma[HISI_SAS_MAX_QUEUES];
+ struct hisi_sas_initial_fis *initial_fis;
+ dma_addr_t initial_fis_dma;
+ struct hisi_sas_itct *itct;
+ dma_addr_t itct_dma;
+ struct hisi_sas_iost *iost;
+ dma_addr_t iost_dma;
+ struct hisi_sas_breakpoint *breakpoint;
+ dma_addr_t breakpoint_dma;
+ struct hisi_sas_breakpoint *sata_breakpoint;
+ dma_addr_t sata_breakpoint_dma;
+ struct hisi_sas_slot *slot_info;
+ const struct hisi_sas_hw *hw; /* Low level hw interface */
+};
+
+/* Generic HW DMA host memory structures */
+/* Delivery queue header */
+struct hisi_sas_cmd_hdr {
+ /* dw0 */
+ __le32 dw0;
+
+ /* dw1 */
+ __le32 dw1;
+
+ /* dw2 */
+ __le32 dw2;
+
+ /* dw3 */
+ __le32 transfer_tags;
+
+ /* dw4 */
+ __le32 data_transfer_len;
+
+ /* dw5 */
+ __le32 first_burst_num;
+
+ /* dw6 */
+ __le32 sg_len;
+
+ /* dw7 */
+ __le32 dw7;
+
+ /* dw8-9 */
+ __le64 cmd_table_addr;
+
+ /* dw10-11 */
+ __le64 sts_buffer_addr;
+
+ /* dw12-13 */
+ __le64 prd_table_addr;
+
+ /* dw14-15 */
+ __le64 dif_prd_table_addr;
+};
+
+struct hisi_sas_itct {
+ __le64 qw0;
+ __le64 sas_addr;
+ __le64 qw2;
+ __le64 qw3;
+ __le64 qw4;
+ __le64 qw_sata_ncq0_3;
+ __le64 qw_sata_ncq7_4;
+ __le64 qw_sata_ncq11_8;
+ __le64 qw_sata_ncq15_12;
+ __le64 qw_sata_ncq19_16;
+ __le64 qw_sata_ncq23_20;
+ __le64 qw_sata_ncq27_24;
+ __le64 qw_sata_ncq31_28;
+ __le64 qw_non_ncq_iptt;
+ __le64 qw_rsvd0;
+ __le64 qw_rsvd1;
+};
+
+struct hisi_sas_iost {
+ __le64 qw0;
+ __le64 qw1;
+ __le64 qw2;
+ __le64 qw3;
+};
+
+struct hisi_sas_err_record {
+ /* dw0 */
+ __le32 dma_err_type;
+
+ /* dw1 */
+ __le32 trans_tx_fail_type;
+
+ /* dw2 */
+ __le32 trans_rx_fail_type;
+
+ /* dw3 */
+ u32 rsvd;
+};
+
+struct hisi_sas_initial_fis {
+ struct hisi_sas_err_record err_record;
+ struct dev_to_host_fis fis;
+ u32 rsvd[3];
+};
+
+struct hisi_sas_breakpoint {
+ u8 data[128]; /*io128 byte*/
+};
+
+struct hisi_sas_sge {
+ __le64 addr;
+ __le32 page_ctrl_0;
+ __le32 page_ctrl_1;
+ __le32 data_len;
+ __le32 data_off;
+};
+
+struct hisi_sas_command_table_smp {
+ u8 bytes[44];
+};
+
+struct hisi_sas_command_table_stp {
+ struct host_to_dev_fis command_fis;
+ u8 dummy[12];
+ u8 atapi_cdb[ATAPI_CDB_LEN];
+};
+
+#define HISI_SAS_SGE_PAGE_CNT SCSI_MAX_SG_SEGMENTS
+struct hisi_sas_sge_page {
+ struct hisi_sas_sge sge[HISI_SAS_SGE_PAGE_CNT];
+};
+
+struct hisi_sas_command_table_ssp {
+ struct ssp_frame_hdr hdr;
+ union {
+ struct {
+ struct ssp_command_iu task;
+ u32 prot[6];
+ };
+ struct ssp_tmf_iu ssp_task;
+ struct xfer_rdy_iu xfer_rdy;
+ struct ssp_response_iu ssp_res;
+ } u;
+};
+
+union hisi_sas_command_table {
+ struct hisi_sas_command_table_ssp ssp;
+ struct hisi_sas_command_table_smp smp;
+ struct hisi_sas_command_table_stp stp;
+};
+extern int hisi_sas_probe(struct platform_device *pdev,
+ const struct hisi_sas_hw *ops);
+extern int hisi_sas_remove(struct platform_device *pdev);
+
+extern void hisi_sas_phy_down(struct hisi_hba *hisi_hba, int phy_no, int rdy);
+extern void hisi_sas_slot_task_free(struct hisi_hba *hisi_hba,
+ struct sas_task *task,
+ struct hisi_sas_slot *slot);
+#endif
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
new file mode 100644
index 000000000000..99b1950d751c
--- /dev/null
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -0,0 +1,1358 @@
+/*
+ * Copyright (c) 2015 Linaro Ltd.
+ * Copyright (c) 2015 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include "hisi_sas.h"
+#define DRV_NAME "hisi_sas"
+
+#define DEV_IS_EXPANDER(type) \
+ ((type == SAS_EDGE_EXPANDER_DEVICE) || \
+ (type == SAS_FANOUT_EXPANDER_DEVICE))
+
+#define DEV_IS_GONE(dev) \
+ ((!dev) || (dev->dev_type == SAS_PHY_UNUSED))
+
+static struct hisi_hba *dev_to_hisi_hba(struct domain_device *device)
+{
+ return device->port->ha->lldd_ha;
+}
+
+static void hisi_sas_slot_index_clear(struct hisi_hba *hisi_hba, int slot_idx)
+{
+ void *bitmap = hisi_hba->slot_index_tags;
+
+ clear_bit(slot_idx, bitmap);
+}
+
+static void hisi_sas_slot_index_free(struct hisi_hba *hisi_hba, int slot_idx)
+{
+ hisi_sas_slot_index_clear(hisi_hba, slot_idx);
+}
+
+static void hisi_sas_slot_index_set(struct hisi_hba *hisi_hba, int slot_idx)
+{
+ void *bitmap = hisi_hba->slot_index_tags;
+
+ set_bit(slot_idx, bitmap);
+}
+
+static int hisi_sas_slot_index_alloc(struct hisi_hba *hisi_hba, int *slot_idx)
+{
+ unsigned int index;
+ void *bitmap = hisi_hba->slot_index_tags;
+
+ index = find_first_zero_bit(bitmap, hisi_hba->slot_index_count);
+ if (index >= hisi_hba->slot_index_count)
+ return -SAS_QUEUE_FULL;
+ hisi_sas_slot_index_set(hisi_hba, index);
+ *slot_idx = index;
+ return 0;
+}
+
+static void hisi_sas_slot_index_init(struct hisi_hba *hisi_hba)
+{
+ int i;
+
+ for (i = 0; i < hisi_hba->slot_index_count; ++i)
+ hisi_sas_slot_index_clear(hisi_hba, i);
+}
+
+void hisi_sas_slot_task_free(struct hisi_hba *hisi_hba, struct sas_task *task,
+ struct hisi_sas_slot *slot)
+{
+ struct device *dev = &hisi_hba->pdev->dev;
+
+ if (!slot->task)
+ return;
+
+ if (!sas_protocol_ata(task->task_proto))
+ if (slot->n_elem)
+ dma_unmap_sg(dev, task->scatter, slot->n_elem,
+ task->data_dir);
+
+ if (slot->command_table)
+ dma_pool_free(hisi_hba->command_table_pool,
+ slot->command_table, slot->command_table_dma);
+
+ if (slot->status_buffer)
+ dma_pool_free(hisi_hba->status_buffer_pool,
+ slot->status_buffer, slot->status_buffer_dma);
+
+ if (slot->sge_page)
+ dma_pool_free(hisi_hba->sge_page_pool, slot->sge_page,
+ slot->sge_page_dma);
+
+ list_del_init(&slot->entry);
+ task->lldd_task = NULL;
+ slot->task = NULL;
+ slot->port = NULL;
+ hisi_sas_slot_index_free(hisi_hba, slot->idx);
+ memset(slot, 0, sizeof(*slot));
+}
+EXPORT_SYMBOL_GPL(hisi_sas_slot_task_free);
+
+static int hisi_sas_task_prep_smp(struct hisi_hba *hisi_hba,
+ struct hisi_sas_slot *slot)
+{
+ return hisi_hba->hw->prep_smp(hisi_hba, slot);
+}
+
+static int hisi_sas_task_prep_ssp(struct hisi_hba *hisi_hba,
+ struct hisi_sas_slot *slot, int is_tmf,
+ struct hisi_sas_tmf_task *tmf)
+{
+ return hisi_hba->hw->prep_ssp(hisi_hba, slot, is_tmf, tmf);
+}
+
+static int hisi_sas_task_prep(struct sas_task *task, struct hisi_hba *hisi_hba,
+ int is_tmf, struct hisi_sas_tmf_task *tmf,
+ int *pass)
+{
+ struct domain_device *device = task->dev;
+ struct hisi_sas_device *sas_dev = device->lldd_dev;
+ struct hisi_sas_port *port;
+ struct hisi_sas_slot *slot;
+ struct hisi_sas_cmd_hdr *cmd_hdr_base;
+ struct device *dev = &hisi_hba->pdev->dev;
+ int dlvry_queue_slot, dlvry_queue, n_elem = 0, rc, slot_idx;
+
+ if (!device->port) {
+ struct task_status_struct *ts = &task->task_status;
+
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_PHY_DOWN;
+ /*
+ * libsas will use dev->port, should
+ * not call task_done for sata
+ */
+ if (device->dev_type != SAS_SATA_DEV)
+ task->task_done(task);
+ return 0;
+ }
+
+ if (DEV_IS_GONE(sas_dev)) {
+ if (sas_dev)
+ dev_info(dev, "task prep: device %llu not ready\n",
+ sas_dev->device_id);
+ else
+ dev_info(dev, "task prep: device %016llx not ready\n",
+ SAS_ADDR(device->sas_addr));
+
+ rc = SAS_PHY_DOWN;
+ return rc;
+ }
+ port = device->port->lldd_port;
+ if (port && !port->port_attached && !tmf) {
+ if (sas_protocol_ata(task->task_proto)) {
+ struct task_status_struct *ts = &task->task_status;
+
+ dev_info(dev,
+ "task prep: SATA/STP port%d not attach device\n",
+ device->port->id);
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_PHY_DOWN;
+ task->task_done(task);
+ } else {
+ struct task_status_struct *ts = &task->task_status;
+
+ dev_info(dev,
+ "task prep: SAS port%d does not attach device\n",
+ device->port->id);
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_PHY_DOWN;
+ task->task_done(task);
+ }
+ return 0;
+ }
+
+ if (!sas_protocol_ata(task->task_proto)) {
+ if (task->num_scatter) {
+ n_elem = dma_map_sg(dev, task->scatter,
+ task->num_scatter, task->data_dir);
+ if (!n_elem) {
+ rc = -ENOMEM;
+ goto prep_out;
+ }
+ }
+ } else
+ n_elem = task->num_scatter;
+
+ rc = hisi_sas_slot_index_alloc(hisi_hba, &slot_idx);
+ if (rc)
+ goto err_out;
+ rc = hisi_hba->hw->get_free_slot(hisi_hba, &dlvry_queue,
+ &dlvry_queue_slot);
+ if (rc)
+ goto err_out_tag;
+
+ slot = &hisi_hba->slot_info[slot_idx];
+ memset(slot, 0, sizeof(struct hisi_sas_slot));
+
+ slot->idx = slot_idx;
+ slot->n_elem = n_elem;
+ slot->dlvry_queue = dlvry_queue;
+ slot->dlvry_queue_slot = dlvry_queue_slot;
+ cmd_hdr_base = hisi_hba->cmd_hdr[dlvry_queue];
+ slot->cmd_hdr = &cmd_hdr_base[dlvry_queue_slot];
+ slot->task = task;
+ slot->port = port;
+ task->lldd_task = slot;
+
+ slot->status_buffer = dma_pool_alloc(hisi_hba->status_buffer_pool,
+ GFP_ATOMIC,
+ &slot->status_buffer_dma);
+ if (!slot->status_buffer) {
+ rc = -ENOMEM;
+ goto err_out_slot_buf;
+ }
+ memset(slot->status_buffer, 0, HISI_SAS_STATUS_BUF_SZ);
+
+ slot->command_table = dma_pool_alloc(hisi_hba->command_table_pool,
+ GFP_ATOMIC,
+ &slot->command_table_dma);
+ if (!slot->command_table) {
+ rc = -ENOMEM;
+ goto err_out_status_buf;
+ }
+ memset(slot->command_table, 0, HISI_SAS_COMMAND_TABLE_SZ);
+ memset(slot->cmd_hdr, 0, sizeof(struct hisi_sas_cmd_hdr));
+
+ switch (task->task_proto) {
+ case SAS_PROTOCOL_SMP:
+ rc = hisi_sas_task_prep_smp(hisi_hba, slot);
+ break;
+ case SAS_PROTOCOL_SSP:
+ rc = hisi_sas_task_prep_ssp(hisi_hba, slot, is_tmf, tmf);
+ break;
+ case SAS_PROTOCOL_SATA:
+ case SAS_PROTOCOL_STP:
+ case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
+ default:
+ dev_err(dev, "task prep: unknown/unsupported proto (0x%x)\n",
+ task->task_proto);
+ rc = -EINVAL;
+ break;
+ }
+
+ if (rc) {
+ dev_err(dev, "task prep: rc = 0x%x\n", rc);
+ if (slot->sge_page)
+ goto err_out_sge;
+ goto err_out_command_table;
+ }
+
+ list_add_tail(&slot->entry, &port->list);
+ spin_lock(&task->task_state_lock);
+ task->task_state_flags |= SAS_TASK_AT_INITIATOR;
+ spin_unlock(&task->task_state_lock);
+
+ hisi_hba->slot_prep = slot;
+
+ sas_dev->running_req++;
+ ++(*pass);
+
+ return 0;
+
+err_out_sge:
+ dma_pool_free(hisi_hba->sge_page_pool, slot->sge_page,
+ slot->sge_page_dma);
+err_out_command_table:
+ dma_pool_free(hisi_hba->command_table_pool, slot->command_table,
+ slot->command_table_dma);
+err_out_status_buf:
+ dma_pool_free(hisi_hba->status_buffer_pool, slot->status_buffer,
+ slot->status_buffer_dma);
+err_out_slot_buf:
+ /* Nothing to be done */
+err_out_tag:
+ hisi_sas_slot_index_free(hisi_hba, slot_idx);
+err_out:
+ dev_err(dev, "task prep: failed[%d]!\n", rc);
+ if (!sas_protocol_ata(task->task_proto))
+ if (n_elem)
+ dma_unmap_sg(dev, task->scatter, n_elem,
+ task->data_dir);
+prep_out:
+ return rc;
+}
+
+static int hisi_sas_task_exec(struct sas_task *task, gfp_t gfp_flags,
+ int is_tmf, struct hisi_sas_tmf_task *tmf)
+{
+ u32 rc;
+ u32 pass = 0;
+ unsigned long flags;
+ struct hisi_hba *hisi_hba = dev_to_hisi_hba(task->dev);
+ struct device *dev = &hisi_hba->pdev->dev;
+
+ /* protect task_prep and start_delivery sequence */
+ spin_lock_irqsave(&hisi_hba->lock, flags);
+ rc = hisi_sas_task_prep(task, hisi_hba, is_tmf, tmf, &pass);
+ if (rc)
+ dev_err(dev, "task exec: failed[%d]!\n", rc);
+
+ if (likely(pass))
+ hisi_hba->hw->start_delivery(hisi_hba);
+ spin_unlock_irqrestore(&hisi_hba->lock, flags);
+
+ return rc;
+}
+
+static void hisi_sas_bytes_dmaed(struct hisi_hba *hisi_hba, int phy_no)
+{
+ struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ struct sas_ha_struct *sas_ha;
+
+ if (!phy->phy_attached)
+ return;
+
+ sas_ha = &hisi_hba->sha;
+ sas_ha->notify_phy_event(sas_phy, PHYE_OOB_DONE);
+
+ if (sas_phy->phy) {
+ struct sas_phy *sphy = sas_phy->phy;
+
+ sphy->negotiated_linkrate = sas_phy->linkrate;
+ sphy->minimum_linkrate = phy->minimum_linkrate;
+ sphy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
+ sphy->maximum_linkrate = phy->maximum_linkrate;
+ }
+
+ if (phy->phy_type & PORT_TYPE_SAS) {
+ struct sas_identify_frame *id;
+
+ id = (struct sas_identify_frame *)phy->frame_rcvd;
+ id->dev_type = phy->identify.device_type;
+ id->initiator_bits = SAS_PROTOCOL_ALL;
+ id->target_bits = phy->identify.target_port_protocols;
+ } else if (phy->phy_type & PORT_TYPE_SATA) {
+ /*Nothing*/
+ }
+
+ sas_phy->frame_rcvd_size = phy->frame_rcvd_size;
+ sas_ha->notify_port_event(sas_phy, PORTE_BYTES_DMAED);
+}
+
+static struct hisi_sas_device *hisi_sas_alloc_dev(struct domain_device *device)
+{
+ struct hisi_hba *hisi_hba = dev_to_hisi_hba(device);
+ struct hisi_sas_device *sas_dev = NULL;
+ int i;
+
+ spin_lock(&hisi_hba->lock);
+ for (i = 0; i < HISI_SAS_MAX_DEVICES; i++) {
+ if (hisi_hba->devices[i].dev_type == SAS_PHY_UNUSED) {
+ hisi_hba->devices[i].device_id = i;
+ sas_dev = &hisi_hba->devices[i];
+ sas_dev->dev_status = HISI_SAS_DEV_NORMAL;
+ sas_dev->dev_type = device->dev_type;
+ sas_dev->hisi_hba = hisi_hba;
+ sas_dev->sas_device = device;
+ break;
+ }
+ }
+ spin_unlock(&hisi_hba->lock);
+
+ return sas_dev;
+}
+
+static int hisi_sas_dev_found(struct domain_device *device)
+{
+ struct hisi_hba *hisi_hba = dev_to_hisi_hba(device);
+ struct domain_device *parent_dev = device->parent;
+ struct hisi_sas_device *sas_dev;
+ struct device *dev = &hisi_hba->pdev->dev;
+
+ sas_dev = hisi_sas_alloc_dev(device);
+ if (!sas_dev) {
+ dev_err(dev, "fail alloc dev: max support %d devices\n",
+ HISI_SAS_MAX_DEVICES);
+ return -EINVAL;
+ }
+
+ device->lldd_dev = sas_dev;
+ hisi_hba->hw->setup_itct(hisi_hba, sas_dev);
+
+ if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) {
+ int phy_no;
+ u8 phy_num = parent_dev->ex_dev.num_phys;
+ struct ex_phy *phy;
+
+ for (phy_no = 0; phy_no < phy_num; phy_no++) {
+ phy = &parent_dev->ex_dev.ex_phy[phy_no];
+ if (SAS_ADDR(phy->attached_sas_addr) ==
+ SAS_ADDR(device->sas_addr)) {
+ sas_dev->attached_phy = phy_no;
+ break;
+ }
+ }
+
+ if (phy_no == phy_num) {
+ dev_info(dev, "dev found: no attached "
+ "dev:%016llx at ex:%016llx\n",
+ SAS_ADDR(device->sas_addr),
+ SAS_ADDR(parent_dev->sas_addr));
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static void hisi_sas_scan_start(struct Scsi_Host *shost)
+{
+ struct hisi_hba *hisi_hba = shost_priv(shost);
+ int i;
+
+ for (i = 0; i < hisi_hba->n_phy; ++i)
+ hisi_sas_bytes_dmaed(hisi_hba, i);
+
+ hisi_hba->scan_finished = 1;
+}
+
+static int hisi_sas_scan_finished(struct Scsi_Host *shost, unsigned long time)
+{
+ struct hisi_hba *hisi_hba = shost_priv(shost);
+ struct sas_ha_struct *sha = &hisi_hba->sha;
+
+ if (hisi_hba->scan_finished == 0)
+ return 0;
+
+ sas_drain_work(sha);
+ return 1;
+}
+
+static void hisi_sas_phyup_work(struct work_struct *work)
+{
+ struct hisi_sas_phy *phy =
+ container_of(work, struct hisi_sas_phy, phyup_ws);
+ struct hisi_hba *hisi_hba = phy->hisi_hba;
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ int phy_no = sas_phy->id;
+
+ hisi_hba->hw->sl_notify(hisi_hba, phy_no); /* This requires a sleep */
+ hisi_sas_bytes_dmaed(hisi_hba, phy_no);
+}
+
+static void hisi_sas_phy_init(struct hisi_hba *hisi_hba, int phy_no)
+{
+ struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+
+ phy->hisi_hba = hisi_hba;
+ phy->port = NULL;
+ init_timer(&phy->timer);
+ sas_phy->enabled = (phy_no < hisi_hba->n_phy) ? 1 : 0;
+ sas_phy->class = SAS;
+ sas_phy->iproto = SAS_PROTOCOL_ALL;
+ sas_phy->tproto = 0;
+ sas_phy->type = PHY_TYPE_PHYSICAL;
+ sas_phy->role = PHY_ROLE_INITIATOR;
+ sas_phy->oob_mode = OOB_NOT_CONNECTED;
+ sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN;
+ sas_phy->id = phy_no;
+ sas_phy->sas_addr = &hisi_hba->sas_addr[0];
+ sas_phy->frame_rcvd = &phy->frame_rcvd[0];
+ sas_phy->ha = (struct sas_ha_struct *)hisi_hba->shost->hostdata;
+ sas_phy->lldd_phy = phy;
+
+ INIT_WORK(&phy->phyup_ws, hisi_sas_phyup_work);
+}
+
+static void hisi_sas_port_notify_formed(struct asd_sas_phy *sas_phy)
+{
+ struct sas_ha_struct *sas_ha = sas_phy->ha;
+ struct hisi_hba *hisi_hba = sas_ha->lldd_ha;
+ struct hisi_sas_phy *phy = sas_phy->lldd_phy;
+ struct asd_sas_port *sas_port = sas_phy->port;
+ struct hisi_sas_port *port = &hisi_hba->port[sas_phy->id];
+ unsigned long flags;
+
+ if (!sas_port)
+ return;
+
+ spin_lock_irqsave(&hisi_hba->lock, flags);
+ port->port_attached = 1;
+ port->id = phy->port_id;
+ phy->port = port;
+ sas_port->lldd_port = port;
+ spin_unlock_irqrestore(&hisi_hba->lock, flags);
+}
+
+static void hisi_sas_do_release_task(struct hisi_hba *hisi_hba, int phy_no,
+ struct domain_device *device)
+{
+ struct hisi_sas_phy *phy;
+ struct hisi_sas_port *port;
+ struct hisi_sas_slot *slot, *slot2;
+ struct device *dev = &hisi_hba->pdev->dev;
+
+ phy = &hisi_hba->phy[phy_no];
+ port = phy->port;
+ if (!port)
+ return;
+
+ list_for_each_entry_safe(slot, slot2, &port->list, entry) {
+ struct sas_task *task;
+
+ task = slot->task;
+ if (device && task->dev != device)
+ continue;
+
+ dev_info(dev, "Release slot [%d:%d], task [%p]:\n",
+ slot->dlvry_queue, slot->dlvry_queue_slot, task);
+ hisi_hba->hw->slot_complete(hisi_hba, slot, 1);
+ }
+}
+
+static void hisi_sas_port_notify_deformed(struct asd_sas_phy *sas_phy)
+{
+ struct domain_device *device;
+ struct hisi_sas_phy *phy = sas_phy->lldd_phy;
+ struct asd_sas_port *sas_port = sas_phy->port;
+
+ list_for_each_entry(device, &sas_port->dev_list, dev_list_node)
+ hisi_sas_do_release_task(phy->hisi_hba, sas_phy->id, device);
+}
+
+static void hisi_sas_release_task(struct hisi_hba *hisi_hba,
+ struct domain_device *device)
+{
+ struct asd_sas_port *port = device->port;
+ struct asd_sas_phy *sas_phy;
+
+ list_for_each_entry(sas_phy, &port->phy_list, port_phy_el)
+ hisi_sas_do_release_task(hisi_hba, sas_phy->id, device);
+}
+
+static void hisi_sas_dev_gone(struct domain_device *device)
+{
+ struct hisi_sas_device *sas_dev = device->lldd_dev;
+ struct hisi_hba *hisi_hba = dev_to_hisi_hba(device);
+ struct device *dev = &hisi_hba->pdev->dev;
+ u64 dev_id = sas_dev->device_id;
+
+ dev_info(dev, "found dev[%lld:%x] is gone\n",
+ sas_dev->device_id, sas_dev->dev_type);
+
+ hisi_hba->hw->free_device(hisi_hba, sas_dev);
+ device->lldd_dev = NULL;
+ memset(sas_dev, 0, sizeof(*sas_dev));
+ sas_dev->device_id = dev_id;
+ sas_dev->dev_type = SAS_PHY_UNUSED;
+ sas_dev->dev_status = HISI_SAS_DEV_NORMAL;
+}
+
+static int hisi_sas_queue_command(struct sas_task *task, gfp_t gfp_flags)
+{
+ return hisi_sas_task_exec(task, gfp_flags, 0, NULL);
+}
+
+static int hisi_sas_control_phy(struct asd_sas_phy *sas_phy, enum phy_func func,
+ void *funcdata)
+{
+ struct sas_ha_struct *sas_ha = sas_phy->ha;
+ struct hisi_hba *hisi_hba = sas_ha->lldd_ha;
+ int phy_no = sas_phy->id;
+
+ switch (func) {
+ case PHY_FUNC_HARD_RESET:
+ hisi_hba->hw->phy_hard_reset(hisi_hba, phy_no);
+ break;
+
+ case PHY_FUNC_LINK_RESET:
+ hisi_hba->hw->phy_enable(hisi_hba, phy_no);
+ hisi_hba->hw->phy_hard_reset(hisi_hba, phy_no);
+ break;
+
+ case PHY_FUNC_DISABLE:
+ hisi_hba->hw->phy_disable(hisi_hba, phy_no);
+ break;
+
+ case PHY_FUNC_SET_LINK_RATE:
+ case PHY_FUNC_RELEASE_SPINUP_HOLD:
+ default:
+ return -EOPNOTSUPP;
+ }
+ return 0;
+}
+
+static void hisi_sas_task_done(struct sas_task *task)
+{
+ if (!del_timer(&task->slow_task->timer))
+ return;
+ complete(&task->slow_task->completion);
+}
+
+static void hisi_sas_tmf_timedout(unsigned long data)
+{
+ struct sas_task *task = (struct sas_task *)data;
+
+ task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+ complete(&task->slow_task->completion);
+}
+
+#define TASK_TIMEOUT 20
+#define TASK_RETRY 3
+static int hisi_sas_exec_internal_tmf_task(struct domain_device *device,
+ void *parameter, u32 para_len,
+ struct hisi_sas_tmf_task *tmf)
+{
+ struct hisi_sas_device *sas_dev = device->lldd_dev;
+ struct hisi_hba *hisi_hba = sas_dev->hisi_hba;
+ struct device *dev = &hisi_hba->pdev->dev;
+ struct sas_task *task;
+ int res, retry;
+
+ for (retry = 0; retry < TASK_RETRY; retry++) {
+ task = sas_alloc_slow_task(GFP_KERNEL);
+ if (!task)
+ return -ENOMEM;
+
+ task->dev = device;
+ task->task_proto = device->tproto;
+
+ memcpy(&task->ssp_task, parameter, para_len);
+ task->task_done = hisi_sas_task_done;
+
+ task->slow_task->timer.data = (unsigned long) task;
+ task->slow_task->timer.function = hisi_sas_tmf_timedout;
+ task->slow_task->timer.expires = jiffies + TASK_TIMEOUT*HZ;
+ add_timer(&task->slow_task->timer);
+
+ res = hisi_sas_task_exec(task, GFP_KERNEL, 1, tmf);
+
+ if (res) {
+ del_timer(&task->slow_task->timer);
+ dev_err(dev, "abort tmf: executing internal task failed: %d\n",
+ res);
+ goto ex_err;
+ }
+
+ wait_for_completion(&task->slow_task->completion);
+ res = TMF_RESP_FUNC_FAILED;
+ /* Even TMF timed out, return direct. */
+ if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
+ if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
+ dev_err(dev, "abort tmf: TMF task[%d] timeout\n",
+ tmf->tag_of_task_to_be_managed);
+ if (task->lldd_task) {
+ struct hisi_sas_slot *slot =
+ task->lldd_task;
+
+ hisi_sas_slot_task_free(hisi_hba,
+ task, slot);
+ }
+
+ goto ex_err;
+ }
+ }
+
+ if (task->task_status.resp == SAS_TASK_COMPLETE &&
+ task->task_status.stat == SAM_STAT_GOOD) {
+ res = TMF_RESP_FUNC_COMPLETE;
+ break;
+ }
+
+ if (task->task_status.resp == SAS_TASK_COMPLETE &&
+ task->task_status.stat == SAS_DATA_UNDERRUN) {
+ /* no error, but return the number of bytes of
+ * underrun
+ */
+ dev_warn(dev, "abort tmf: task to dev %016llx "
+ "resp: 0x%x sts 0x%x underrun\n",
+ SAS_ADDR(device->sas_addr),
+ task->task_status.resp,
+ task->task_status.stat);
+ res = task->task_status.residual;
+ break;
+ }
+
+ if (task->task_status.resp == SAS_TASK_COMPLETE &&
+ task->task_status.stat == SAS_DATA_OVERRUN) {
+ dev_warn(dev, "abort tmf: blocked task error\n");
+ res = -EMSGSIZE;
+ break;
+ }
+
+ dev_warn(dev, "abort tmf: task to dev "
+ "%016llx resp: 0x%x status 0x%x\n",
+ SAS_ADDR(device->sas_addr), task->task_status.resp,
+ task->task_status.stat);
+ sas_free_task(task);
+ task = NULL;
+ }
+ex_err:
+ WARN_ON(retry == TASK_RETRY);
+ sas_free_task(task);
+ return res;
+}
+
+static int hisi_sas_debug_issue_ssp_tmf(struct domain_device *device,
+ u8 *lun, struct hisi_sas_tmf_task *tmf)
+{
+ struct sas_ssp_task ssp_task;
+
+ if (!(device->tproto & SAS_PROTOCOL_SSP))
+ return TMF_RESP_FUNC_ESUPP;
+
+ memcpy(ssp_task.LUN, lun, 8);
+
+ return hisi_sas_exec_internal_tmf_task(device, &ssp_task,
+ sizeof(ssp_task), tmf);
+}
+
+static int hisi_sas_abort_task(struct sas_task *task)
+{
+ struct scsi_lun lun;
+ struct hisi_sas_tmf_task tmf_task;
+ struct domain_device *device = task->dev;
+ struct hisi_sas_device *sas_dev = device->lldd_dev;
+ struct hisi_hba *hisi_hba = dev_to_hisi_hba(task->dev);
+ struct device *dev = &hisi_hba->pdev->dev;
+ int rc = TMF_RESP_FUNC_FAILED;
+ unsigned long flags;
+
+ if (!sas_dev) {
+ dev_warn(dev, "Device has been removed\n");
+ return TMF_RESP_FUNC_FAILED;
+ }
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (task->task_state_flags & SAS_TASK_STATE_DONE) {
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ rc = TMF_RESP_FUNC_COMPLETE;
+ goto out;
+ }
+
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ sas_dev->dev_status = HISI_SAS_DEV_EH;
+ if (task->lldd_task && task->task_proto & SAS_PROTOCOL_SSP) {
+ struct scsi_cmnd *cmnd = task->uldd_task;
+ struct hisi_sas_slot *slot = task->lldd_task;
+ u32 tag = slot->idx;
+
+ int_to_scsilun(cmnd->device->lun, &lun);
+ tmf_task.tmf = TMF_ABORT_TASK;
+ tmf_task.tag_of_task_to_be_managed = cpu_to_le16(tag);
+
+ rc = hisi_sas_debug_issue_ssp_tmf(task->dev, lun.scsi_lun,
+ &tmf_task);
+
+ /* if successful, clear the task and callback forwards.*/
+ if (rc == TMF_RESP_FUNC_COMPLETE) {
+ if (task->lldd_task) {
+ struct hisi_sas_slot *slot;
+
+ slot = &hisi_hba->slot_info
+ [tmf_task.tag_of_task_to_be_managed];
+ spin_lock_irqsave(&hisi_hba->lock, flags);
+ hisi_hba->hw->slot_complete(hisi_hba, slot, 1);
+ spin_unlock_irqrestore(&hisi_hba->lock, flags);
+ }
+ }
+
+ } else if (task->task_proto & SAS_PROTOCOL_SATA ||
+ task->task_proto & SAS_PROTOCOL_STP) {
+ if (task->dev->dev_type == SAS_SATA_DEV) {
+ struct hisi_slot_info *slot = task->lldd_task;
+
+ dev_notice(dev, "abort task: hba=%p task=%p slot=%p\n",
+ hisi_hba, task, slot);
+ task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+ rc = TMF_RESP_FUNC_COMPLETE;
+ goto out;
+ }
+
+ }
+
+out:
+ if (rc != TMF_RESP_FUNC_COMPLETE)
+ dev_notice(dev, "abort task: rc=%d\n", rc);
+ return rc;
+}
+
+static int hisi_sas_abort_task_set(struct domain_device *device, u8 *lun)
+{
+ struct hisi_sas_tmf_task tmf_task;
+ int rc = TMF_RESP_FUNC_FAILED;
+
+ tmf_task.tmf = TMF_ABORT_TASK_SET;
+ rc = hisi_sas_debug_issue_ssp_tmf(device, lun, &tmf_task);
+
+ return rc;
+}
+
+static int hisi_sas_clear_aca(struct domain_device *device, u8 *lun)
+{
+ int rc = TMF_RESP_FUNC_FAILED;
+ struct hisi_sas_tmf_task tmf_task;
+
+ tmf_task.tmf = TMF_CLEAR_ACA;
+ rc = hisi_sas_debug_issue_ssp_tmf(device, lun, &tmf_task);
+
+ return rc;
+}
+
+static int hisi_sas_debug_I_T_nexus_reset(struct domain_device *device)
+{
+ struct sas_phy *phy = sas_get_local_phy(device);
+ int rc, reset_type = (device->dev_type == SAS_SATA_DEV ||
+ (device->tproto & SAS_PROTOCOL_STP)) ? 0 : 1;
+ rc = sas_phy_reset(phy, reset_type);
+ sas_put_local_phy(phy);
+ msleep(2000);
+ return rc;
+}
+
+static int hisi_sas_I_T_nexus_reset(struct domain_device *device)
+{
+ struct hisi_sas_device *sas_dev = device->lldd_dev;
+ struct hisi_hba *hisi_hba = dev_to_hisi_hba(device);
+ unsigned long flags;
+ int rc = TMF_RESP_FUNC_FAILED;
+
+ if (sas_dev->dev_status != HISI_SAS_DEV_EH)
+ return TMF_RESP_FUNC_FAILED;
+ sas_dev->dev_status = HISI_SAS_DEV_NORMAL;
+
+ rc = hisi_sas_debug_I_T_nexus_reset(device);
+
+ spin_lock_irqsave(&hisi_hba->lock, flags);
+ hisi_sas_release_task(hisi_hba, device);
+ spin_unlock_irqrestore(&hisi_hba->lock, flags);
+
+ return 0;
+}
+
+static int hisi_sas_lu_reset(struct domain_device *device, u8 *lun)
+{
+ struct hisi_sas_tmf_task tmf_task;
+ struct hisi_sas_device *sas_dev = device->lldd_dev;
+ struct hisi_hba *hisi_hba = dev_to_hisi_hba(device);
+ struct device *dev = &hisi_hba->pdev->dev;
+ unsigned long flags;
+ int rc = TMF_RESP_FUNC_FAILED;
+
+ tmf_task.tmf = TMF_LU_RESET;
+ sas_dev->dev_status = HISI_SAS_DEV_EH;
+ rc = hisi_sas_debug_issue_ssp_tmf(device, lun, &tmf_task);
+ if (rc == TMF_RESP_FUNC_COMPLETE) {
+ spin_lock_irqsave(&hisi_hba->lock, flags);
+ hisi_sas_release_task(hisi_hba, device);
+ spin_unlock_irqrestore(&hisi_hba->lock, flags);
+ }
+
+ /* If failed, fall-through I_T_Nexus reset */
+ dev_err(dev, "lu_reset: for device[%llx]:rc= %d\n",
+ sas_dev->device_id, rc);
+ return rc;
+}
+
+static int hisi_sas_query_task(struct sas_task *task)
+{
+ struct scsi_lun lun;
+ struct hisi_sas_tmf_task tmf_task;
+ int rc = TMF_RESP_FUNC_FAILED;
+
+ if (task->lldd_task && task->task_proto & SAS_PROTOCOL_SSP) {
+ struct scsi_cmnd *cmnd = task->uldd_task;
+ struct domain_device *device = task->dev;
+ struct hisi_sas_slot *slot = task->lldd_task;
+ u32 tag = slot->idx;
+
+ int_to_scsilun(cmnd->device->lun, &lun);
+ tmf_task.tmf = TMF_QUERY_TASK;
+ tmf_task.tag_of_task_to_be_managed = cpu_to_le16(tag);
+
+ rc = hisi_sas_debug_issue_ssp_tmf(device,
+ lun.scsi_lun,
+ &tmf_task);
+ switch (rc) {
+ /* The task is still in Lun, release it then */
+ case TMF_RESP_FUNC_SUCC:
+ /* The task is not in Lun or failed, reset the phy */
+ case TMF_RESP_FUNC_FAILED:
+ case TMF_RESP_FUNC_COMPLETE:
+ break;
+ }
+ }
+ return rc;
+}
+
+static void hisi_sas_port_formed(struct asd_sas_phy *sas_phy)
+{
+ hisi_sas_port_notify_formed(sas_phy);
+}
+
+static void hisi_sas_port_deformed(struct asd_sas_phy *sas_phy)
+{
+ hisi_sas_port_notify_deformed(sas_phy);
+}
+
+static void hisi_sas_phy_disconnected(struct hisi_sas_phy *phy)
+{
+ phy->phy_attached = 0;
+ phy->phy_type = 0;
+ phy->port = NULL;
+}
+
+void hisi_sas_phy_down(struct hisi_hba *hisi_hba, int phy_no, int rdy)
+{
+ struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ struct sas_ha_struct *sas_ha = &hisi_hba->sha;
+
+ if (rdy) {
+ /* Phy down but ready */
+ hisi_sas_bytes_dmaed(hisi_hba, phy_no);
+ hisi_sas_port_notify_formed(sas_phy);
+ } else {
+ struct hisi_sas_port *port = phy->port;
+
+ /* Phy down and not ready */
+ sas_ha->notify_phy_event(sas_phy, PHYE_LOSS_OF_SIGNAL);
+ sas_phy_disconnected(sas_phy);
+
+ if (port) {
+ if (phy->phy_type & PORT_TYPE_SAS) {
+ int port_id = port->id;
+
+ if (!hisi_hba->hw->get_wideport_bitmap(hisi_hba,
+ port_id))
+ port->port_attached = 0;
+ } else if (phy->phy_type & PORT_TYPE_SATA)
+ port->port_attached = 0;
+ }
+ hisi_sas_phy_disconnected(phy);
+ }
+}
+EXPORT_SYMBOL_GPL(hisi_sas_phy_down);
+
+static struct scsi_transport_template *hisi_sas_stt;
+
+static struct scsi_host_template hisi_sas_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .queuecommand = sas_queuecommand,
+ .target_alloc = sas_target_alloc,
+ .slave_configure = sas_slave_configure,
+ .scan_finished = hisi_sas_scan_finished,
+ .scan_start = hisi_sas_scan_start,
+ .change_queue_depth = sas_change_queue_depth,
+ .bios_param = sas_bios_param,
+ .can_queue = 1,
+ .this_id = -1,
+ .sg_tablesize = SG_ALL,
+ .max_sectors = SCSI_DEFAULT_MAX_SECTORS,
+ .use_clustering = ENABLE_CLUSTERING,
+ .eh_device_reset_handler = sas_eh_device_reset_handler,
+ .eh_bus_reset_handler = sas_eh_bus_reset_handler,
+ .target_destroy = sas_target_destroy,
+ .ioctl = sas_ioctl,
+};
+
+static struct sas_domain_function_template hisi_sas_transport_ops = {
+ .lldd_dev_found = hisi_sas_dev_found,
+ .lldd_dev_gone = hisi_sas_dev_gone,
+ .lldd_execute_task = hisi_sas_queue_command,
+ .lldd_control_phy = hisi_sas_control_phy,
+ .lldd_abort_task = hisi_sas_abort_task,
+ .lldd_abort_task_set = hisi_sas_abort_task_set,
+ .lldd_clear_aca = hisi_sas_clear_aca,
+ .lldd_I_T_nexus_reset = hisi_sas_I_T_nexus_reset,
+ .lldd_lu_reset = hisi_sas_lu_reset,
+ .lldd_query_task = hisi_sas_query_task,
+ .lldd_port_formed = hisi_sas_port_formed,
+ .lldd_port_deformed = hisi_sas_port_deformed,
+};
+
+static int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost)
+{
+ int i, s;
+ struct platform_device *pdev = hisi_hba->pdev;
+ struct device *dev = &pdev->dev;
+
+ spin_lock_init(&hisi_hba->lock);
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ hisi_sas_phy_init(hisi_hba, i);
+ hisi_hba->port[i].port_attached = 0;
+ hisi_hba->port[i].id = -1;
+ INIT_LIST_HEAD(&hisi_hba->port[i].list);
+ }
+
+ for (i = 0; i < HISI_SAS_MAX_DEVICES; i++) {
+ hisi_hba->devices[i].dev_type = SAS_PHY_UNUSED;
+ hisi_hba->devices[i].device_id = i;
+ hisi_hba->devices[i].dev_status = HISI_SAS_DEV_NORMAL;
+ }
+
+ for (i = 0; i < hisi_hba->queue_count; i++) {
+ struct hisi_sas_cq *cq = &hisi_hba->cq[i];
+
+ /* Completion queue structure */
+ cq->id = i;
+ cq->hisi_hba = hisi_hba;
+
+ /* Delivery queue */
+ s = sizeof(struct hisi_sas_cmd_hdr) * HISI_SAS_QUEUE_SLOTS;
+ hisi_hba->cmd_hdr[i] = dma_alloc_coherent(dev, s,
+ &hisi_hba->cmd_hdr_dma[i], GFP_KERNEL);
+ if (!hisi_hba->cmd_hdr[i])
+ goto err_out;
+ memset(hisi_hba->cmd_hdr[i], 0, s);
+
+ /* Completion queue */
+ s = hisi_hba->hw->complete_hdr_size * HISI_SAS_QUEUE_SLOTS;
+ hisi_hba->complete_hdr[i] = dma_alloc_coherent(dev, s,
+ &hisi_hba->complete_hdr_dma[i], GFP_KERNEL);
+ if (!hisi_hba->complete_hdr[i])
+ goto err_out;
+ memset(hisi_hba->complete_hdr[i], 0, s);
+ }
+
+ s = HISI_SAS_STATUS_BUF_SZ;
+ hisi_hba->status_buffer_pool = dma_pool_create("status_buffer",
+ dev, s, 16, 0);
+ if (!hisi_hba->status_buffer_pool)
+ goto err_out;
+
+ s = HISI_SAS_COMMAND_TABLE_SZ;
+ hisi_hba->command_table_pool = dma_pool_create("command_table",
+ dev, s, 16, 0);
+ if (!hisi_hba->command_table_pool)
+ goto err_out;
+
+ s = HISI_SAS_MAX_ITCT_ENTRIES * sizeof(struct hisi_sas_itct);
+ hisi_hba->itct = dma_alloc_coherent(dev, s, &hisi_hba->itct_dma,
+ GFP_KERNEL);
+ if (!hisi_hba->itct)
+ goto err_out;
+
+ memset(hisi_hba->itct, 0, s);
+
+ hisi_hba->slot_info = devm_kcalloc(dev, HISI_SAS_COMMAND_ENTRIES,
+ sizeof(struct hisi_sas_slot),
+ GFP_KERNEL);
+ if (!hisi_hba->slot_info)
+ goto err_out;
+
+ s = HISI_SAS_COMMAND_ENTRIES * sizeof(struct hisi_sas_iost);
+ hisi_hba->iost = dma_alloc_coherent(dev, s, &hisi_hba->iost_dma,
+ GFP_KERNEL);
+ if (!hisi_hba->iost)
+ goto err_out;
+
+ memset(hisi_hba->iost, 0, s);
+
+ s = HISI_SAS_COMMAND_ENTRIES * sizeof(struct hisi_sas_breakpoint);
+ hisi_hba->breakpoint = dma_alloc_coherent(dev, s,
+ &hisi_hba->breakpoint_dma, GFP_KERNEL);
+ if (!hisi_hba->breakpoint)
+ goto err_out;
+
+ memset(hisi_hba->breakpoint, 0, s);
+
+ hisi_hba->slot_index_count = HISI_SAS_COMMAND_ENTRIES;
+ s = hisi_hba->slot_index_count / sizeof(unsigned long);
+ hisi_hba->slot_index_tags = devm_kzalloc(dev, s, GFP_KERNEL);
+ if (!hisi_hba->slot_index_tags)
+ goto err_out;
+
+ hisi_hba->sge_page_pool = dma_pool_create("status_sge", dev,
+ sizeof(struct hisi_sas_sge_page), 16, 0);
+ if (!hisi_hba->sge_page_pool)
+ goto err_out;
+
+ s = sizeof(struct hisi_sas_initial_fis) * HISI_SAS_MAX_PHYS;
+ hisi_hba->initial_fis = dma_alloc_coherent(dev, s,
+ &hisi_hba->initial_fis_dma, GFP_KERNEL);
+ if (!hisi_hba->initial_fis)
+ goto err_out;
+ memset(hisi_hba->initial_fis, 0, s);
+
+ s = HISI_SAS_COMMAND_ENTRIES * sizeof(struct hisi_sas_breakpoint) * 2;
+ hisi_hba->sata_breakpoint = dma_alloc_coherent(dev, s,
+ &hisi_hba->sata_breakpoint_dma, GFP_KERNEL);
+ if (!hisi_hba->sata_breakpoint)
+ goto err_out;
+ memset(hisi_hba->sata_breakpoint, 0, s);
+
+ hisi_sas_slot_index_init(hisi_hba);
+
+ hisi_hba->wq = create_singlethread_workqueue(dev_name(dev));
+ if (!hisi_hba->wq) {
+ dev_err(dev, "sas_alloc: failed to create workqueue\n");
+ goto err_out;
+ }
+
+ return 0;
+err_out:
+ return -ENOMEM;
+}
+
+static void hisi_sas_free(struct hisi_hba *hisi_hba)
+{
+ struct device *dev = &hisi_hba->pdev->dev;
+ int i, s;
+
+ for (i = 0; i < hisi_hba->queue_count; i++) {
+ s = sizeof(struct hisi_sas_cmd_hdr) * HISI_SAS_QUEUE_SLOTS;
+ if (hisi_hba->cmd_hdr[i])
+ dma_free_coherent(dev, s,
+ hisi_hba->cmd_hdr[i],
+ hisi_hba->cmd_hdr_dma[i]);
+
+ s = hisi_hba->hw->complete_hdr_size * HISI_SAS_QUEUE_SLOTS;
+ if (hisi_hba->complete_hdr[i])
+ dma_free_coherent(dev, s,
+ hisi_hba->complete_hdr[i],
+ hisi_hba->complete_hdr_dma[i]);
+ }
+
+ dma_pool_destroy(hisi_hba->status_buffer_pool);
+ dma_pool_destroy(hisi_hba->command_table_pool);
+ dma_pool_destroy(hisi_hba->sge_page_pool);
+
+ s = HISI_SAS_MAX_ITCT_ENTRIES * sizeof(struct hisi_sas_itct);
+ if (hisi_hba->itct)
+ dma_free_coherent(dev, s,
+ hisi_hba->itct, hisi_hba->itct_dma);
+
+ s = HISI_SAS_COMMAND_ENTRIES * sizeof(struct hisi_sas_iost);
+ if (hisi_hba->iost)
+ dma_free_coherent(dev, s,
+ hisi_hba->iost, hisi_hba->iost_dma);
+
+ s = HISI_SAS_COMMAND_ENTRIES * sizeof(struct hisi_sas_breakpoint);
+ if (hisi_hba->breakpoint)
+ dma_free_coherent(dev, s,
+ hisi_hba->breakpoint,
+ hisi_hba->breakpoint_dma);
+
+
+ s = sizeof(struct hisi_sas_initial_fis) * HISI_SAS_MAX_PHYS;
+ if (hisi_hba->initial_fis)
+ dma_free_coherent(dev, s,
+ hisi_hba->initial_fis,
+ hisi_hba->initial_fis_dma);
+
+ s = HISI_SAS_COMMAND_ENTRIES * sizeof(struct hisi_sas_breakpoint) * 2;
+ if (hisi_hba->sata_breakpoint)
+ dma_free_coherent(dev, s,
+ hisi_hba->sata_breakpoint,
+ hisi_hba->sata_breakpoint_dma);
+
+ if (hisi_hba->wq)
+ destroy_workqueue(hisi_hba->wq);
+}
+
+static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
+ const struct hisi_sas_hw *hw)
+{
+ struct resource *res;
+ struct Scsi_Host *shost;
+ struct hisi_hba *hisi_hba;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = pdev->dev.of_node;
+ struct property *sas_addr_prop;
+
+ shost = scsi_host_alloc(&hisi_sas_sht, sizeof(*hisi_hba));
+ if (!shost)
+ goto err_out;
+ hisi_hba = shost_priv(shost);
+
+ hisi_hba->hw = hw;
+ hisi_hba->pdev = pdev;
+ hisi_hba->shost = shost;
+ SHOST_TO_SAS_HA(shost) = &hisi_hba->sha;
+
+ init_timer(&hisi_hba->timer);
+
+ sas_addr_prop = of_find_property(np, "sas-addr", NULL);
+ if (!sas_addr_prop || (sas_addr_prop->length != SAS_ADDR_SIZE))
+ goto err_out;
+ memcpy(hisi_hba->sas_addr, sas_addr_prop->value, SAS_ADDR_SIZE);
+
+ if (of_property_read_u32(np, "ctrl-reset-reg",
+ &hisi_hba->ctrl_reset_reg))
+ goto err_out;
+
+ if (of_property_read_u32(np, "ctrl-reset-sts-reg",
+ &hisi_hba->ctrl_reset_sts_reg))
+ goto err_out;
+
+ if (of_property_read_u32(np, "ctrl-clock-ena-reg",
+ &hisi_hba->ctrl_clock_ena_reg))
+ goto err_out;
+
+ if (of_property_read_u32(np, "phy-count", &hisi_hba->n_phy))
+ goto err_out;
+
+ if (of_property_read_u32(np, "queue-count", &hisi_hba->queue_count))
+ goto err_out;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ hisi_hba->regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(hisi_hba->regs))
+ goto err_out;
+
+ hisi_hba->ctrl = syscon_regmap_lookup_by_phandle(
+ np, "hisilicon,sas-syscon");
+ if (IS_ERR(hisi_hba->ctrl))
+ goto err_out;
+
+ if (hisi_sas_alloc(hisi_hba, shost)) {
+ hisi_sas_free(hisi_hba);
+ goto err_out;
+ }
+
+ return shost;
+err_out:
+ dev_err(dev, "shost alloc failed\n");
+ return NULL;
+}
+
+static void hisi_sas_init_add(struct hisi_hba *hisi_hba)
+{
+ int i;
+
+ for (i = 0; i < hisi_hba->n_phy; i++)
+ memcpy(&hisi_hba->phy[i].dev_sas_addr,
+ hisi_hba->sas_addr,
+ SAS_ADDR_SIZE);
+}
+
+int hisi_sas_probe(struct platform_device *pdev,
+ const struct hisi_sas_hw *hw)
+{
+ struct Scsi_Host *shost;
+ struct hisi_hba *hisi_hba;
+ struct device *dev = &pdev->dev;
+ struct asd_sas_phy **arr_phy;
+ struct asd_sas_port **arr_port;
+ struct sas_ha_struct *sha;
+ int rc, phy_nr, port_nr, i;
+
+ shost = hisi_sas_shost_alloc(pdev, hw);
+ if (!shost) {
+ rc = -ENOMEM;
+ goto err_out_ha;
+ }
+
+ sha = SHOST_TO_SAS_HA(shost);
+ hisi_hba = shost_priv(shost);
+ platform_set_drvdata(pdev, sha);
+
+ if (dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64)) &&
+ dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32))) {
+ dev_err(dev, "No usable DMA addressing method\n");
+ rc = -EIO;
+ goto err_out_ha;
+ }
+
+ phy_nr = port_nr = hisi_hba->n_phy;
+
+ arr_phy = devm_kcalloc(dev, phy_nr, sizeof(void *), GFP_KERNEL);
+ arr_port = devm_kcalloc(dev, port_nr, sizeof(void *), GFP_KERNEL);
+ if (!arr_phy || !arr_port)
+ return -ENOMEM;
+
+ sha->sas_phy = arr_phy;
+ sha->sas_port = arr_port;
+ sha->core.shost = shost;
+ sha->lldd_ha = hisi_hba;
+
+ shost->transportt = hisi_sas_stt;
+ shost->max_id = HISI_SAS_MAX_DEVICES;
+ shost->max_lun = ~0;
+ shost->max_channel = 1;
+ shost->max_cmd_len = 16;
+ shost->sg_tablesize = min_t(u16, SG_ALL, HISI_SAS_SGE_PAGE_CNT);
+ shost->can_queue = HISI_SAS_COMMAND_ENTRIES;
+ shost->cmd_per_lun = HISI_SAS_COMMAND_ENTRIES;
+
+ sha->sas_ha_name = DRV_NAME;
+ sha->dev = &hisi_hba->pdev->dev;
+ sha->lldd_module = THIS_MODULE;
+ sha->sas_addr = &hisi_hba->sas_addr[0];
+ sha->num_phys = hisi_hba->n_phy;
+ sha->core.shost = hisi_hba->shost;
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ sha->sas_phy[i] = &hisi_hba->phy[i].sas_phy;
+ sha->sas_port[i] = &hisi_hba->port[i].sas_port;
+ }
+
+ hisi_sas_init_add(hisi_hba);
+
+ rc = hisi_hba->hw->hw_init(hisi_hba);
+ if (rc)
+ goto err_out_ha;
+
+ rc = scsi_add_host(shost, &pdev->dev);
+ if (rc)
+ goto err_out_ha;
+
+ rc = sas_register_ha(sha);
+ if (rc)
+ goto err_out_register_ha;
+
+ scsi_scan_host(shost);
+
+ return 0;
+
+err_out_register_ha:
+ scsi_remove_host(shost);
+err_out_ha:
+ kfree(shost);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(hisi_sas_probe);
+
+int hisi_sas_remove(struct platform_device *pdev)
+{
+ struct sas_ha_struct *sha = platform_get_drvdata(pdev);
+ struct hisi_hba *hisi_hba = sha->lldd_ha;
+
+ scsi_remove_host(sha->core.shost);
+ sas_unregister_ha(sha);
+ sas_remove_host(sha->core.shost);
+
+ hisi_sas_free(hisi_hba);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(hisi_sas_remove);
+
+static __init int hisi_sas_init(void)
+{
+ pr_info("hisi_sas: driver version %s\n", DRV_VERSION);
+
+ hisi_sas_stt = sas_domain_attach_transport(&hisi_sas_transport_ops);
+ if (!hisi_sas_stt)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static __exit void hisi_sas_exit(void)
+{
+ sas_release_transport(hisi_sas_stt);
+}
+
+module_init(hisi_sas_init);
+module_exit(hisi_sas_exit);
+
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("John Garry <john.garry@huawei.com>");
+MODULE_DESCRIPTION("HISILICON SAS controller driver");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
new file mode 100644
index 000000000000..d54381149c0d
--- /dev/null
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -0,0 +1,1839 @@
+/*
+ * Copyright (c) 2015 Linaro Ltd.
+ * Copyright (c) 2015 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include "hisi_sas.h"
+#define DRV_NAME "hisi_sas_v1_hw"
+
+/* global registers need init*/
+#define DLVRY_QUEUE_ENABLE 0x0
+#define IOST_BASE_ADDR_LO 0x8
+#define IOST_BASE_ADDR_HI 0xc
+#define ITCT_BASE_ADDR_LO 0x10
+#define ITCT_BASE_ADDR_HI 0x14
+#define BROKEN_MSG_ADDR_LO 0x18
+#define BROKEN_MSG_ADDR_HI 0x1c
+#define PHY_CONTEXT 0x20
+#define PHY_STATE 0x24
+#define PHY_PORT_NUM_MA 0x28
+#define PORT_STATE 0x2c
+#define PHY_CONN_RATE 0x30
+#define HGC_TRANS_TASK_CNT_LIMIT 0x38
+#define AXI_AHB_CLK_CFG 0x3c
+#define HGC_SAS_TXFAIL_RETRY_CTRL 0x84
+#define HGC_GET_ITV_TIME 0x90
+#define DEVICE_MSG_WORK_MODE 0x94
+#define I_T_NEXUS_LOSS_TIME 0xa0
+#define BUS_INACTIVE_LIMIT_TIME 0xa8
+#define REJECT_TO_OPEN_LIMIT_TIME 0xac
+#define CFG_AGING_TIME 0xbc
+#define CFG_AGING_TIME_ITCT_REL_OFF 0
+#define CFG_AGING_TIME_ITCT_REL_MSK (0x1 << CFG_AGING_TIME_ITCT_REL_OFF)
+#define HGC_DFX_CFG2 0xc0
+#define FIS_LIST_BADDR_L 0xc4
+#define CFG_1US_TIMER_TRSH 0xcc
+#define CFG_SAS_CONFIG 0xd4
+#define HGC_IOST_ECC_ADDR 0x140
+#define HGC_IOST_ECC_ADDR_BAD_OFF 16
+#define HGC_IOST_ECC_ADDR_BAD_MSK (0x3ff << HGC_IOST_ECC_ADDR_BAD_OFF)
+#define HGC_DQ_ECC_ADDR 0x144
+#define HGC_DQ_ECC_ADDR_BAD_OFF 16
+#define HGC_DQ_ECC_ADDR_BAD_MSK (0xfff << HGC_DQ_ECC_ADDR_BAD_OFF)
+#define HGC_INVLD_DQE_INFO 0x148
+#define HGC_INVLD_DQE_INFO_DQ_OFF 0
+#define HGC_INVLD_DQE_INFO_DQ_MSK (0xffff << HGC_INVLD_DQE_INFO_DQ_OFF)
+#define HGC_INVLD_DQE_INFO_TYPE_OFF 16
+#define HGC_INVLD_DQE_INFO_TYPE_MSK (0x1 << HGC_INVLD_DQE_INFO_TYPE_OFF)
+#define HGC_INVLD_DQE_INFO_FORCE_OFF 17
+#define HGC_INVLD_DQE_INFO_FORCE_MSK (0x1 << HGC_INVLD_DQE_INFO_FORCE_OFF)
+#define HGC_INVLD_DQE_INFO_PHY_OFF 18
+#define HGC_INVLD_DQE_INFO_PHY_MSK (0x1 << HGC_INVLD_DQE_INFO_PHY_OFF)
+#define HGC_INVLD_DQE_INFO_ABORT_OFF 19
+#define HGC_INVLD_DQE_INFO_ABORT_MSK (0x1 << HGC_INVLD_DQE_INFO_ABORT_OFF)
+#define HGC_INVLD_DQE_INFO_IPTT_OF_OFF 20
+#define HGC_INVLD_DQE_INFO_IPTT_OF_MSK (0x1 << HGC_INVLD_DQE_INFO_IPTT_OF_OFF)
+#define HGC_INVLD_DQE_INFO_SSP_ERR_OFF 21
+#define HGC_INVLD_DQE_INFO_SSP_ERR_MSK (0x1 << HGC_INVLD_DQE_INFO_SSP_ERR_OFF)
+#define HGC_INVLD_DQE_INFO_OFL_OFF 22
+#define HGC_INVLD_DQE_INFO_OFL_MSK (0x1 << HGC_INVLD_DQE_INFO_OFL_OFF)
+#define HGC_ITCT_ECC_ADDR 0x150
+#define HGC_ITCT_ECC_ADDR_BAD_OFF 16
+#define HGC_ITCT_ECC_ADDR_BAD_MSK (0x3ff << HGC_ITCT_ECC_ADDR_BAD_OFF)
+#define HGC_AXI_FIFO_ERR_INFO 0x154
+#define INT_COAL_EN 0x1bc
+#define OQ_INT_COAL_TIME 0x1c0
+#define OQ_INT_COAL_CNT 0x1c4
+#define ENT_INT_COAL_TIME 0x1c8
+#define ENT_INT_COAL_CNT 0x1cc
+#define OQ_INT_SRC 0x1d0
+#define OQ_INT_SRC_MSK 0x1d4
+#define ENT_INT_SRC1 0x1d8
+#define ENT_INT_SRC2 0x1dc
+#define ENT_INT_SRC2_DQ_CFG_ERR_OFF 25
+#define ENT_INT_SRC2_DQ_CFG_ERR_MSK (0x1 << ENT_INT_SRC2_DQ_CFG_ERR_OFF)
+#define ENT_INT_SRC2_CQ_CFG_ERR_OFF 27
+#define ENT_INT_SRC2_CQ_CFG_ERR_MSK (0x1 << ENT_INT_SRC2_CQ_CFG_ERR_OFF)
+#define ENT_INT_SRC2_AXI_WRONG_INT_OFF 28
+#define ENT_INT_SRC2_AXI_WRONG_INT_MSK (0x1 << ENT_INT_SRC2_AXI_WRONG_INT_OFF)
+#define ENT_INT_SRC2_AXI_OVERLF_INT_OFF 29
+#define ENT_INT_SRC2_AXI_OVERLF_INT_MSK (0x1 << ENT_INT_SRC2_AXI_OVERLF_INT_OFF)
+#define ENT_INT_SRC_MSK1 0x1e0
+#define ENT_INT_SRC_MSK2 0x1e4
+#define SAS_ECC_INTR 0x1e8
+#define SAS_ECC_INTR_DQ_ECC1B_OFF 0
+#define SAS_ECC_INTR_DQ_ECC1B_MSK (0x1 << SAS_ECC_INTR_DQ_ECC1B_OFF)
+#define SAS_ECC_INTR_DQ_ECCBAD_OFF 1
+#define SAS_ECC_INTR_DQ_ECCBAD_MSK (0x1 << SAS_ECC_INTR_DQ_ECCBAD_OFF)
+#define SAS_ECC_INTR_IOST_ECC1B_OFF 2
+#define SAS_ECC_INTR_IOST_ECC1B_MSK (0x1 << SAS_ECC_INTR_IOST_ECC1B_OFF)
+#define SAS_ECC_INTR_IOST_ECCBAD_OFF 3
+#define SAS_ECC_INTR_IOST_ECCBAD_MSK (0x1 << SAS_ECC_INTR_IOST_ECCBAD_OFF)
+#define SAS_ECC_INTR_ITCT_ECC1B_OFF 4
+#define SAS_ECC_INTR_ITCT_ECC1B_MSK (0x1 << SAS_ECC_INTR_ITCT_ECC1B_OFF)
+#define SAS_ECC_INTR_ITCT_ECCBAD_OFF 5
+#define SAS_ECC_INTR_ITCT_ECCBAD_MSK (0x1 << SAS_ECC_INTR_ITCT_ECCBAD_OFF)
+#define SAS_ECC_INTR_MSK 0x1ec
+#define HGC_ERR_STAT_EN 0x238
+#define DLVRY_Q_0_BASE_ADDR_LO 0x260
+#define DLVRY_Q_0_BASE_ADDR_HI 0x264
+#define DLVRY_Q_0_DEPTH 0x268
+#define DLVRY_Q_0_WR_PTR 0x26c
+#define DLVRY_Q_0_RD_PTR 0x270
+#define COMPL_Q_0_BASE_ADDR_LO 0x4e0
+#define COMPL_Q_0_BASE_ADDR_HI 0x4e4
+#define COMPL_Q_0_DEPTH 0x4e8
+#define COMPL_Q_0_WR_PTR 0x4ec
+#define COMPL_Q_0_RD_PTR 0x4f0
+#define HGC_ECC_ERR 0x7d0
+
+/* phy registers need init */
+#define PORT_BASE (0x800)
+
+#define PHY_CFG (PORT_BASE + 0x0)
+#define PHY_CFG_ENA_OFF 0
+#define PHY_CFG_ENA_MSK (0x1 << PHY_CFG_ENA_OFF)
+#define PHY_CFG_DC_OPT_OFF 2
+#define PHY_CFG_DC_OPT_MSK (0x1 << PHY_CFG_DC_OPT_OFF)
+#define PROG_PHY_LINK_RATE (PORT_BASE + 0xc)
+#define PROG_PHY_LINK_RATE_MAX_OFF 0
+#define PROG_PHY_LINK_RATE_MAX_MSK (0xf << PROG_PHY_LINK_RATE_MAX_OFF)
+#define PROG_PHY_LINK_RATE_MIN_OFF 4
+#define PROG_PHY_LINK_RATE_MIN_MSK (0xf << PROG_PHY_LINK_RATE_MIN_OFF)
+#define PROG_PHY_LINK_RATE_OOB_OFF 8
+#define PROG_PHY_LINK_RATE_OOB_MSK (0xf << PROG_PHY_LINK_RATE_OOB_OFF)
+#define PHY_CTRL (PORT_BASE + 0x14)
+#define PHY_CTRL_RESET_OFF 0
+#define PHY_CTRL_RESET_MSK (0x1 << PHY_CTRL_RESET_OFF)
+#define PHY_RATE_NEGO (PORT_BASE + 0x30)
+#define PHY_PCN (PORT_BASE + 0x44)
+#define SL_TOUT_CFG (PORT_BASE + 0x8c)
+#define SL_CONTROL (PORT_BASE + 0x94)
+#define SL_CONTROL_NOTIFY_EN_OFF 0
+#define SL_CONTROL_NOTIFY_EN_MSK (0x1 << SL_CONTROL_NOTIFY_EN_OFF)
+#define TX_ID_DWORD0 (PORT_BASE + 0x9c)
+#define TX_ID_DWORD1 (PORT_BASE + 0xa0)
+#define TX_ID_DWORD2 (PORT_BASE + 0xa4)
+#define TX_ID_DWORD3 (PORT_BASE + 0xa8)
+#define TX_ID_DWORD4 (PORT_BASE + 0xaC)
+#define TX_ID_DWORD5 (PORT_BASE + 0xb0)
+#define TX_ID_DWORD6 (PORT_BASE + 0xb4)
+#define RX_IDAF_DWORD0 (PORT_BASE + 0xc4)
+#define RX_IDAF_DWORD1 (PORT_BASE + 0xc8)
+#define RX_IDAF_DWORD2 (PORT_BASE + 0xcc)
+#define RX_IDAF_DWORD3 (PORT_BASE + 0xd0)
+#define RX_IDAF_DWORD4 (PORT_BASE + 0xd4)
+#define RX_IDAF_DWORD5 (PORT_BASE + 0xd8)
+#define RX_IDAF_DWORD6 (PORT_BASE + 0xdc)
+#define RXOP_CHECK_CFG_H (PORT_BASE + 0xfc)
+#define DONE_RECEIVED_TIME (PORT_BASE + 0x12c)
+#define CON_CFG_DRIVER (PORT_BASE + 0x130)
+#define PHY_CONFIG2 (PORT_BASE + 0x1a8)
+#define PHY_CONFIG2_FORCE_TXDEEMPH_OFF 3
+#define PHY_CONFIG2_FORCE_TXDEEMPH_MSK (0x1 << PHY_CONFIG2_FORCE_TXDEEMPH_OFF)
+#define PHY_CONFIG2_TX_TRAIN_COMP_OFF 24
+#define PHY_CONFIG2_TX_TRAIN_COMP_MSK (0x1 << PHY_CONFIG2_TX_TRAIN_COMP_OFF)
+#define CHL_INT0 (PORT_BASE + 0x1b0)
+#define CHL_INT0_PHYCTRL_NOTRDY_OFF 0
+#define CHL_INT0_PHYCTRL_NOTRDY_MSK (0x1 << CHL_INT0_PHYCTRL_NOTRDY_OFF)
+#define CHL_INT0_SN_FAIL_NGR_OFF 2
+#define CHL_INT0_SN_FAIL_NGR_MSK (0x1 << CHL_INT0_SN_FAIL_NGR_OFF)
+#define CHL_INT0_DWS_LOST_OFF 4
+#define CHL_INT0_DWS_LOST_MSK (0x1 << CHL_INT0_DWS_LOST_OFF)
+#define CHL_INT0_SL_IDAF_FAIL_OFF 10
+#define CHL_INT0_SL_IDAF_FAIL_MSK (0x1 << CHL_INT0_SL_IDAF_FAIL_OFF)
+#define CHL_INT0_ID_TIMEOUT_OFF 11
+#define CHL_INT0_ID_TIMEOUT_MSK (0x1 << CHL_INT0_ID_TIMEOUT_OFF)
+#define CHL_INT0_SL_OPAF_FAIL_OFF 12
+#define CHL_INT0_SL_OPAF_FAIL_MSK (0x1 << CHL_INT0_SL_OPAF_FAIL_OFF)
+#define CHL_INT0_SL_PS_FAIL_OFF 21
+#define CHL_INT0_SL_PS_FAIL_MSK (0x1 << CHL_INT0_SL_PS_FAIL_OFF)
+#define CHL_INT1 (PORT_BASE + 0x1b4)
+#define CHL_INT2 (PORT_BASE + 0x1b8)
+#define CHL_INT2_SL_RX_BC_ACK_OFF 2
+#define CHL_INT2_SL_RX_BC_ACK_MSK (0x1 << CHL_INT2_SL_RX_BC_ACK_OFF)
+#define CHL_INT2_SL_PHY_ENA_OFF 6
+#define CHL_INT2_SL_PHY_ENA_MSK (0x1 << CHL_INT2_SL_PHY_ENA_OFF)
+#define CHL_INT0_MSK (PORT_BASE + 0x1bc)
+#define CHL_INT0_MSK_PHYCTRL_NOTRDY_OFF 0
+#define CHL_INT0_MSK_PHYCTRL_NOTRDY_MSK (0x1 << CHL_INT0_MSK_PHYCTRL_NOTRDY_OFF)
+#define CHL_INT1_MSK (PORT_BASE + 0x1c0)
+#define CHL_INT2_MSK (PORT_BASE + 0x1c4)
+#define CHL_INT_COAL_EN (PORT_BASE + 0x1d0)
+#define DMA_TX_STATUS (PORT_BASE + 0x2d0)
+#define DMA_TX_STATUS_BUSY_OFF 0
+#define DMA_TX_STATUS_BUSY_MSK (0x1 << DMA_TX_STATUS_BUSY_OFF)
+#define DMA_RX_STATUS (PORT_BASE + 0x2e8)
+#define DMA_RX_STATUS_BUSY_OFF 0
+#define DMA_RX_STATUS_BUSY_MSK (0x1 << DMA_RX_STATUS_BUSY_OFF)
+
+#define AXI_CFG 0x5100
+#define RESET_VALUE 0x7ffff
+
+/* HW dma structures */
+/* Delivery queue header */
+/* dw0 */
+#define CMD_HDR_RESP_REPORT_OFF 5
+#define CMD_HDR_RESP_REPORT_MSK 0x20
+#define CMD_HDR_TLR_CTRL_OFF 6
+#define CMD_HDR_TLR_CTRL_MSK 0xc0
+#define CMD_HDR_PORT_OFF 17
+#define CMD_HDR_PORT_MSK 0xe0000
+#define CMD_HDR_PRIORITY_OFF 27
+#define CMD_HDR_PRIORITY_MSK 0x8000000
+#define CMD_HDR_MODE_OFF 28
+#define CMD_HDR_MODE_MSK 0x10000000
+#define CMD_HDR_CMD_OFF 29
+#define CMD_HDR_CMD_MSK 0xe0000000
+/* dw1 */
+#define CMD_HDR_VERIFY_DTL_OFF 10
+#define CMD_HDR_VERIFY_DTL_MSK 0x400
+#define CMD_HDR_SSP_FRAME_TYPE_OFF 13
+#define CMD_HDR_SSP_FRAME_TYPE_MSK 0xe000
+#define CMD_HDR_DEVICE_ID_OFF 16
+#define CMD_HDR_DEVICE_ID_MSK 0xffff0000
+/* dw2 */
+#define CMD_HDR_CFL_OFF 0
+#define CMD_HDR_CFL_MSK 0x1ff
+#define CMD_HDR_MRFL_OFF 15
+#define CMD_HDR_MRFL_MSK 0xff8000
+#define CMD_HDR_FIRST_BURST_OFF 25
+#define CMD_HDR_FIRST_BURST_MSK 0x2000000
+/* dw3 */
+#define CMD_HDR_IPTT_OFF 0
+#define CMD_HDR_IPTT_MSK 0xffff
+/* dw6 */
+#define CMD_HDR_DATA_SGL_LEN_OFF 16
+#define CMD_HDR_DATA_SGL_LEN_MSK 0xffff0000
+
+/* Completion header */
+#define CMPLT_HDR_IPTT_OFF 0
+#define CMPLT_HDR_IPTT_MSK (0xffff << CMPLT_HDR_IPTT_OFF)
+#define CMPLT_HDR_CMD_CMPLT_OFF 17
+#define CMPLT_HDR_CMD_CMPLT_MSK (0x1 << CMPLT_HDR_CMD_CMPLT_OFF)
+#define CMPLT_HDR_ERR_RCRD_XFRD_OFF 18
+#define CMPLT_HDR_ERR_RCRD_XFRD_MSK (0x1 << CMPLT_HDR_ERR_RCRD_XFRD_OFF)
+#define CMPLT_HDR_RSPNS_XFRD_OFF 19
+#define CMPLT_HDR_RSPNS_XFRD_MSK (0x1 << CMPLT_HDR_RSPNS_XFRD_OFF)
+#define CMPLT_HDR_IO_CFG_ERR_OFF 27
+#define CMPLT_HDR_IO_CFG_ERR_MSK (0x1 << CMPLT_HDR_IO_CFG_ERR_OFF)
+
+/* ITCT header */
+/* qw0 */
+#define ITCT_HDR_DEV_TYPE_OFF 0
+#define ITCT_HDR_DEV_TYPE_MSK (0x3 << ITCT_HDR_DEV_TYPE_OFF)
+#define ITCT_HDR_VALID_OFF 2
+#define ITCT_HDR_VALID_MSK (0x1 << ITCT_HDR_VALID_OFF)
+#define ITCT_HDR_BREAK_REPLY_ENA_OFF 3
+#define ITCT_HDR_BREAK_REPLY_ENA_MSK (0x1 << ITCT_HDR_BREAK_REPLY_ENA_OFF)
+#define ITCT_HDR_AWT_CONTROL_OFF 4
+#define ITCT_HDR_AWT_CONTROL_MSK (0x1 << ITCT_HDR_AWT_CONTROL_OFF)
+#define ITCT_HDR_MAX_CONN_RATE_OFF 5
+#define ITCT_HDR_MAX_CONN_RATE_MSK (0xf << ITCT_HDR_MAX_CONN_RATE_OFF)
+#define ITCT_HDR_VALID_LINK_NUM_OFF 9
+#define ITCT_HDR_VALID_LINK_NUM_MSK (0xf << ITCT_HDR_VALID_LINK_NUM_OFF)
+#define ITCT_HDR_PORT_ID_OFF 13
+#define ITCT_HDR_PORT_ID_MSK (0x7 << ITCT_HDR_PORT_ID_OFF)
+#define ITCT_HDR_SMP_TIMEOUT_OFF 16
+#define ITCT_HDR_SMP_TIMEOUT_MSK (0xffff << ITCT_HDR_SMP_TIMEOUT_OFF)
+#define ITCT_HDR_MAX_BURST_BYTES_OFF 16
+#define ITCT_HDR_MAX_BURST_BYTES_MSK (0xffffffff << \
+ ITCT_MAX_BURST_BYTES_OFF)
+/* qw1 */
+#define ITCT_HDR_MAX_SAS_ADDR_OFF 0
+#define ITCT_HDR_MAX_SAS_ADDR_MSK (0xffffffffffffffff << \
+ ITCT_HDR_MAX_SAS_ADDR_OFF)
+/* qw2 */
+#define ITCT_HDR_IT_NEXUS_LOSS_TL_OFF 0
+#define ITCT_HDR_IT_NEXUS_LOSS_TL_MSK (0xffff << \
+ ITCT_HDR_IT_NEXUS_LOSS_TL_OFF)
+#define ITCT_HDR_BUS_INACTIVE_TL_OFF 16
+#define ITCT_HDR_BUS_INACTIVE_TL_MSK (0xffff << \
+ ITCT_HDR_BUS_INACTIVE_TL_OFF)
+#define ITCT_HDR_MAX_CONN_TL_OFF 32
+#define ITCT_HDR_MAX_CONN_TL_MSK (0xffff << \
+ ITCT_HDR_MAX_CONN_TL_OFF)
+#define ITCT_HDR_REJ_OPEN_TL_OFF 48
+#define ITCT_HDR_REJ_OPEN_TL_MSK (0xffff << \
+ ITCT_REJ_OPEN_TL_OFF)
+
+/* Err record header */
+#define ERR_HDR_DMA_TX_ERR_TYPE_OFF 0
+#define ERR_HDR_DMA_TX_ERR_TYPE_MSK (0xffff << ERR_HDR_DMA_TX_ERR_TYPE_OFF)
+#define ERR_HDR_DMA_RX_ERR_TYPE_OFF 16
+#define ERR_HDR_DMA_RX_ERR_TYPE_MSK (0xffff << ERR_HDR_DMA_RX_ERR_TYPE_OFF)
+
+struct hisi_sas_complete_v1_hdr {
+ __le32 data;
+};
+
+enum {
+ HISI_SAS_PHY_BCAST_ACK = 0,
+ HISI_SAS_PHY_SL_PHY_ENABLED,
+ HISI_SAS_PHY_INT_ABNORMAL,
+ HISI_SAS_PHY_INT_NR
+};
+
+enum {
+ DMA_TX_ERR_BASE = 0x0,
+ DMA_RX_ERR_BASE = 0x100,
+ TRANS_TX_FAIL_BASE = 0x200,
+ TRANS_RX_FAIL_BASE = 0x300,
+
+ /* dma tx */
+ DMA_TX_DIF_CRC_ERR = DMA_TX_ERR_BASE, /* 0x0 */
+ DMA_TX_DIF_APP_ERR, /* 0x1 */
+ DMA_TX_DIF_RPP_ERR, /* 0x2 */
+ DMA_TX_AXI_BUS_ERR, /* 0x3 */
+ DMA_TX_DATA_SGL_OVERFLOW_ERR, /* 0x4 */
+ DMA_TX_DIF_SGL_OVERFLOW_ERR, /* 0x5 */
+ DMA_TX_UNEXP_XFER_RDY_ERR, /* 0x6 */
+ DMA_TX_XFER_RDY_OFFSET_ERR, /* 0x7 */
+ DMA_TX_DATA_UNDERFLOW_ERR, /* 0x8 */
+ DMA_TX_XFER_RDY_LENGTH_OVERFLOW_ERR, /* 0x9 */
+
+ /* dma rx */
+ DMA_RX_BUFFER_ECC_ERR = DMA_RX_ERR_BASE, /* 0x100 */
+ DMA_RX_DIF_CRC_ERR, /* 0x101 */
+ DMA_RX_DIF_APP_ERR, /* 0x102 */
+ DMA_RX_DIF_RPP_ERR, /* 0x103 */
+ DMA_RX_RESP_BUFFER_OVERFLOW_ERR, /* 0x104 */
+ DMA_RX_AXI_BUS_ERR, /* 0x105 */
+ DMA_RX_DATA_SGL_OVERFLOW_ERR, /* 0x106 */
+ DMA_RX_DIF_SGL_OVERFLOW_ERR, /* 0x107 */
+ DMA_RX_DATA_OFFSET_ERR, /* 0x108 */
+ DMA_RX_UNEXP_RX_DATA_ERR, /* 0x109 */
+ DMA_RX_DATA_OVERFLOW_ERR, /* 0x10a */
+ DMA_RX_DATA_UNDERFLOW_ERR, /* 0x10b */
+ DMA_RX_UNEXP_RETRANS_RESP_ERR, /* 0x10c */
+
+ /* trans tx */
+ TRANS_TX_RSVD0_ERR = TRANS_TX_FAIL_BASE, /* 0x200 */
+ TRANS_TX_PHY_NOT_ENABLE_ERR, /* 0x201 */
+ TRANS_TX_OPEN_REJCT_WRONG_DEST_ERR, /* 0x202 */
+ TRANS_TX_OPEN_REJCT_ZONE_VIOLATION_ERR, /* 0x203 */
+ TRANS_TX_OPEN_REJCT_BY_OTHER_ERR, /* 0x204 */
+ TRANS_TX_RSVD1_ERR, /* 0x205 */
+ TRANS_TX_OPEN_REJCT_AIP_TIMEOUT_ERR, /* 0x206 */
+ TRANS_TX_OPEN_REJCT_STP_BUSY_ERR, /* 0x207 */
+ TRANS_TX_OPEN_REJCT_PROTOCOL_NOT_SUPPORT_ERR, /* 0x208 */
+ TRANS_TX_OPEN_REJCT_RATE_NOT_SUPPORT_ERR, /* 0x209 */
+ TRANS_TX_OPEN_REJCT_BAD_DEST_ERR, /* 0x20a */
+ TRANS_TX_OPEN_BREAK_RECEIVE_ERR, /* 0x20b */
+ TRANS_TX_LOW_PHY_POWER_ERR, /* 0x20c */
+ TRANS_TX_OPEN_REJCT_PATHWAY_BLOCKED_ERR, /* 0x20d */
+ TRANS_TX_OPEN_TIMEOUT_ERR, /* 0x20e */
+ TRANS_TX_OPEN_REJCT_NO_DEST_ERR, /* 0x20f */
+ TRANS_TX_OPEN_RETRY_ERR, /* 0x210 */
+ TRANS_TX_RSVD2_ERR, /* 0x211 */
+ TRANS_TX_BREAK_TIMEOUT_ERR, /* 0x212 */
+ TRANS_TX_BREAK_REQUEST_ERR, /* 0x213 */
+ TRANS_TX_BREAK_RECEIVE_ERR, /* 0x214 */
+ TRANS_TX_CLOSE_TIMEOUT_ERR, /* 0x215 */
+ TRANS_TX_CLOSE_NORMAL_ERR, /* 0x216 */
+ TRANS_TX_CLOSE_PHYRESET_ERR, /* 0x217 */
+ TRANS_TX_WITH_CLOSE_DWS_TIMEOUT_ERR, /* 0x218 */
+ TRANS_TX_WITH_CLOSE_COMINIT_ERR, /* 0x219 */
+ TRANS_TX_NAK_RECEIVE_ERR, /* 0x21a */
+ TRANS_TX_ACK_NAK_TIMEOUT_ERR, /* 0x21b */
+ TRANS_TX_CREDIT_TIMEOUT_ERR, /* 0x21c */
+ TRANS_TX_IPTT_CONFLICT_ERR, /* 0x21d */
+ TRANS_TX_TXFRM_TYPE_ERR, /* 0x21e */
+ TRANS_TX_TXSMP_LENGTH_ERR, /* 0x21f */
+
+ /* trans rx */
+ TRANS_RX_FRAME_CRC_ERR = TRANS_RX_FAIL_BASE, /* 0x300 */
+ TRANS_RX_FRAME_DONE_ERR, /* 0x301 */
+ TRANS_RX_FRAME_ERRPRM_ERR, /* 0x302 */
+ TRANS_RX_FRAME_NO_CREDIT_ERR, /* 0x303 */
+ TRANS_RX_RSVD0_ERR, /* 0x304 */
+ TRANS_RX_FRAME_OVERRUN_ERR, /* 0x305 */
+ TRANS_RX_FRAME_NO_EOF_ERR, /* 0x306 */
+ TRANS_RX_LINK_BUF_OVERRUN_ERR, /* 0x307 */
+ TRANS_RX_BREAK_TIMEOUT_ERR, /* 0x308 */
+ TRANS_RX_BREAK_REQUEST_ERR, /* 0x309 */
+ TRANS_RX_BREAK_RECEIVE_ERR, /* 0x30a */
+ TRANS_RX_CLOSE_TIMEOUT_ERR, /* 0x30b */
+ TRANS_RX_CLOSE_NORMAL_ERR, /* 0x30c */
+ TRANS_RX_CLOSE_PHYRESET_ERR, /* 0x30d */
+ TRANS_RX_WITH_CLOSE_DWS_TIMEOUT_ERR, /* 0x30e */
+ TRANS_RX_WITH_CLOSE_COMINIT_ERR, /* 0x30f */
+ TRANS_RX_DATA_LENGTH0_ERR, /* 0x310 */
+ TRANS_RX_BAD_HASH_ERR, /* 0x311 */
+ TRANS_RX_XRDY_ZERO_ERR, /* 0x312 */
+ TRANS_RX_SSP_FRAME_LEN_ERR, /* 0x313 */
+ TRANS_RX_TRANS_RX_RSVD1_ERR, /* 0x314 */
+ TRANS_RX_NO_BALANCE_ERR, /* 0x315 */
+ TRANS_RX_TRANS_RX_RSVD2_ERR, /* 0x316 */
+ TRANS_RX_TRANS_RX_RSVD3_ERR, /* 0x317 */
+ TRANS_RX_BAD_FRAME_TYPE_ERR, /* 0x318 */
+ TRANS_RX_SMP_FRAME_LEN_ERR, /* 0x319 */
+ TRANS_RX_SMP_RESP_TIMEOUT_ERR, /* 0x31a */
+};
+
+#define HISI_SAS_PHY_MAX_INT_NR (HISI_SAS_PHY_INT_NR * HISI_SAS_MAX_PHYS)
+#define HISI_SAS_CQ_MAX_INT_NR (HISI_SAS_MAX_QUEUES)
+#define HISI_SAS_FATAL_INT_NR (2)
+
+#define HISI_SAS_MAX_INT_NR \
+ (HISI_SAS_PHY_MAX_INT_NR + HISI_SAS_CQ_MAX_INT_NR +\
+ HISI_SAS_FATAL_INT_NR)
+
+static u32 hisi_sas_read32(struct hisi_hba *hisi_hba, u32 off)
+{
+ void __iomem *regs = hisi_hba->regs + off;
+
+ return readl(regs);
+}
+
+static u32 hisi_sas_read32_relaxed(struct hisi_hba *hisi_hba, u32 off)
+{
+ void __iomem *regs = hisi_hba->regs + off;
+
+ return readl_relaxed(regs);
+}
+
+static void hisi_sas_write32(struct hisi_hba *hisi_hba,
+ u32 off, u32 val)
+{
+ void __iomem *regs = hisi_hba->regs + off;
+
+ writel(val, regs);
+}
+
+static void hisi_sas_phy_write32(struct hisi_hba *hisi_hba,
+ int phy_no, u32 off, u32 val)
+{
+ void __iomem *regs = hisi_hba->regs + (0x400 * phy_no) + off;
+
+ writel(val, regs);
+}
+
+static u32 hisi_sas_phy_read32(struct hisi_hba *hisi_hba,
+ int phy_no, u32 off)
+{
+ void __iomem *regs = hisi_hba->regs + (0x400 * phy_no) + off;
+
+ return readl(regs);
+}
+
+static void config_phy_opt_mode_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG);
+
+ cfg &= ~PHY_CFG_DC_OPT_MSK;
+ cfg |= 1 << PHY_CFG_DC_OPT_OFF;
+ hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg);
+}
+
+static void config_tx_tfe_autoneg_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CONFIG2);
+
+ cfg &= ~PHY_CONFIG2_FORCE_TXDEEMPH_MSK;
+ hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CONFIG2, cfg);
+}
+
+static void config_id_frame_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ struct sas_identify_frame identify_frame;
+ u32 *identify_buffer;
+
+ memset(&identify_frame, 0, sizeof(identify_frame));
+ identify_frame.dev_type = SAS_END_DEVICE;
+ identify_frame.frame_type = 0;
+ identify_frame._un1 = 1;
+ identify_frame.initiator_bits = SAS_PROTOCOL_ALL;
+ identify_frame.target_bits = SAS_PROTOCOL_NONE;
+ memcpy(&identify_frame._un4_11[0], hisi_hba->sas_addr, SAS_ADDR_SIZE);
+ memcpy(&identify_frame.sas_addr[0], hisi_hba->sas_addr, SAS_ADDR_SIZE);
+ identify_frame.phy_id = phy_no;
+ identify_buffer = (u32 *)(&identify_frame);
+
+ hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD0,
+ __swab32(identify_buffer[0]));
+ hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD1,
+ identify_buffer[2]);
+ hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD2,
+ identify_buffer[1]);
+ hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD3,
+ identify_buffer[4]);
+ hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD4,
+ identify_buffer[3]);
+ hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD5,
+ __swab32(identify_buffer[5]));
+}
+
+static void init_id_frame_v1_hw(struct hisi_hba *hisi_hba)
+{
+ int i;
+
+ for (i = 0; i < hisi_hba->n_phy; i++)
+ config_id_frame_v1_hw(hisi_hba, i);
+}
+
+static void setup_itct_v1_hw(struct hisi_hba *hisi_hba,
+ struct hisi_sas_device *sas_dev)
+{
+ struct domain_device *device = sas_dev->sas_device;
+ struct device *dev = &hisi_hba->pdev->dev;
+ u64 qw0, device_id = sas_dev->device_id;
+ struct hisi_sas_itct *itct = &hisi_hba->itct[device_id];
+
+ memset(itct, 0, sizeof(*itct));
+
+ /* qw0 */
+ qw0 = 0;
+ switch (sas_dev->dev_type) {
+ case SAS_END_DEVICE:
+ case SAS_EDGE_EXPANDER_DEVICE:
+ case SAS_FANOUT_EXPANDER_DEVICE:
+ qw0 = HISI_SAS_DEV_TYPE_SSP << ITCT_HDR_DEV_TYPE_OFF;
+ break;
+ default:
+ dev_warn(dev, "setup itct: unsupported dev type (%d)\n",
+ sas_dev->dev_type);
+ }
+
+ qw0 |= ((1 << ITCT_HDR_VALID_OFF) |
+ (1 << ITCT_HDR_AWT_CONTROL_OFF) |
+ (device->max_linkrate << ITCT_HDR_MAX_CONN_RATE_OFF) |
+ (1 << ITCT_HDR_VALID_LINK_NUM_OFF) |
+ (device->port->id << ITCT_HDR_PORT_ID_OFF));
+ itct->qw0 = cpu_to_le64(qw0);
+
+ /* qw1 */
+ memcpy(&itct->sas_addr, device->sas_addr, SAS_ADDR_SIZE);
+ itct->sas_addr = __swab64(itct->sas_addr);
+
+ /* qw2 */
+ itct->qw2 = cpu_to_le64((500 < ITCT_HDR_IT_NEXUS_LOSS_TL_OFF) |
+ (0xff00 < ITCT_HDR_BUS_INACTIVE_TL_OFF) |
+ (0xff00 < ITCT_HDR_MAX_CONN_TL_OFF) |
+ (0xff00 < ITCT_HDR_REJ_OPEN_TL_OFF));
+}
+
+static void free_device_v1_hw(struct hisi_hba *hisi_hba,
+ struct hisi_sas_device *sas_dev)
+{
+ u64 dev_id = sas_dev->device_id;
+ struct hisi_sas_itct *itct = &hisi_hba->itct[dev_id];
+ u32 qw0, reg_val = hisi_sas_read32(hisi_hba, CFG_AGING_TIME);
+
+ reg_val |= CFG_AGING_TIME_ITCT_REL_MSK;
+ hisi_sas_write32(hisi_hba, CFG_AGING_TIME, reg_val);
+
+ /* free itct */
+ udelay(1);
+ reg_val = hisi_sas_read32(hisi_hba, CFG_AGING_TIME);
+ reg_val &= ~CFG_AGING_TIME_ITCT_REL_MSK;
+ hisi_sas_write32(hisi_hba, CFG_AGING_TIME, reg_val);
+
+ qw0 = cpu_to_le64(itct->qw0);
+ qw0 &= ~ITCT_HDR_VALID_MSK;
+ itct->qw0 = cpu_to_le64(qw0);
+}
+
+static int reset_hw_v1_hw(struct hisi_hba *hisi_hba)
+{
+ int i;
+ unsigned long end_time;
+ u32 val;
+ struct device *dev = &hisi_hba->pdev->dev;
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ u32 phy_ctrl = hisi_sas_phy_read32(hisi_hba, i, PHY_CTRL);
+
+ phy_ctrl |= PHY_CTRL_RESET_MSK;
+ hisi_sas_phy_write32(hisi_hba, i, PHY_CTRL, phy_ctrl);
+ }
+ msleep(1); /* It is safe to wait for 50us */
+
+ /* Ensure DMA tx & rx idle */
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ u32 dma_tx_status, dma_rx_status;
+
+ end_time = jiffies + msecs_to_jiffies(1000);
+
+ while (1) {
+ dma_tx_status = hisi_sas_phy_read32(hisi_hba, i,
+ DMA_TX_STATUS);
+ dma_rx_status = hisi_sas_phy_read32(hisi_hba, i,
+ DMA_RX_STATUS);
+
+ if (!(dma_tx_status & DMA_TX_STATUS_BUSY_MSK) &&
+ !(dma_rx_status & DMA_RX_STATUS_BUSY_MSK))
+ break;
+
+ msleep(20);
+ if (time_after(jiffies, end_time))
+ return -EIO;
+ }
+ }
+
+ /* Ensure axi bus idle */
+ end_time = jiffies + msecs_to_jiffies(1000);
+ while (1) {
+ u32 axi_status =
+ hisi_sas_read32(hisi_hba, AXI_CFG);
+
+ if (axi_status == 0)
+ break;
+
+ msleep(20);
+ if (time_after(jiffies, end_time))
+ return -EIO;
+ }
+
+ /* Apply reset and disable clock */
+ /* clk disable reg is offset by +4 bytes from clk enable reg */
+ regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_reset_reg,
+ RESET_VALUE);
+ regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_clock_ena_reg + 4,
+ RESET_VALUE);
+ msleep(1);
+ regmap_read(hisi_hba->ctrl, hisi_hba->ctrl_reset_sts_reg, &val);
+ if (RESET_VALUE != (val & RESET_VALUE)) {
+ dev_err(dev, "Reset failed\n");
+ return -EIO;
+ }
+
+ /* De-reset and enable clock */
+ /* deassert rst reg is offset by +4 bytes from assert reg */
+ regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_reset_reg + 4,
+ RESET_VALUE);
+ regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_clock_ena_reg,
+ RESET_VALUE);
+ msleep(1);
+ regmap_read(hisi_hba->ctrl, hisi_hba->ctrl_reset_sts_reg, &val);
+ if (val & RESET_VALUE) {
+ dev_err(dev, "De-reset failed\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static void init_reg_v1_hw(struct hisi_hba *hisi_hba)
+{
+ int i;
+
+ /* Global registers init*/
+ hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE,
+ (u32)((1ULL << hisi_hba->queue_count) - 1));
+ hisi_sas_write32(hisi_hba, HGC_TRANS_TASK_CNT_LIMIT, 0x11);
+ hisi_sas_write32(hisi_hba, DEVICE_MSG_WORK_MODE, 0x1);
+ hisi_sas_write32(hisi_hba, HGC_SAS_TXFAIL_RETRY_CTRL, 0x1ff);
+ hisi_sas_write32(hisi_hba, HGC_ERR_STAT_EN, 0x401);
+ hisi_sas_write32(hisi_hba, CFG_1US_TIMER_TRSH, 0x64);
+ hisi_sas_write32(hisi_hba, HGC_GET_ITV_TIME, 0x1);
+ hisi_sas_write32(hisi_hba, I_T_NEXUS_LOSS_TIME, 0x64);
+ hisi_sas_write32(hisi_hba, BUS_INACTIVE_LIMIT_TIME, 0x2710);
+ hisi_sas_write32(hisi_hba, REJECT_TO_OPEN_LIMIT_TIME, 0x1);
+ hisi_sas_write32(hisi_hba, CFG_AGING_TIME, 0x7a12);
+ hisi_sas_write32(hisi_hba, HGC_DFX_CFG2, 0x9c40);
+ hisi_sas_write32(hisi_hba, FIS_LIST_BADDR_L, 0x2);
+ hisi_sas_write32(hisi_hba, INT_COAL_EN, 0xc);
+ hisi_sas_write32(hisi_hba, OQ_INT_COAL_TIME, 0x186a0);
+ hisi_sas_write32(hisi_hba, OQ_INT_COAL_CNT, 1);
+ hisi_sas_write32(hisi_hba, ENT_INT_COAL_TIME, 0x1);
+ hisi_sas_write32(hisi_hba, ENT_INT_COAL_CNT, 0x1);
+ hisi_sas_write32(hisi_hba, OQ_INT_SRC, 0xffffffff);
+ hisi_sas_write32(hisi_hba, OQ_INT_SRC_MSK, 0);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC1, 0xffffffff);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, 0);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC2, 0xffffffff);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK2, 0);
+ hisi_sas_write32(hisi_hba, SAS_ECC_INTR_MSK, 0);
+ hisi_sas_write32(hisi_hba, AXI_AHB_CLK_CFG, 0x2);
+ hisi_sas_write32(hisi_hba, CFG_SAS_CONFIG, 0x22000000);
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ hisi_sas_phy_write32(hisi_hba, i, PROG_PHY_LINK_RATE, 0x88a);
+ hisi_sas_phy_write32(hisi_hba, i, PHY_CONFIG2, 0x7c080);
+ hisi_sas_phy_write32(hisi_hba, i, PHY_RATE_NEGO, 0x415ee00);
+ hisi_sas_phy_write32(hisi_hba, i, PHY_PCN, 0x80a80000);
+ hisi_sas_phy_write32(hisi_hba, i, SL_TOUT_CFG, 0x7d7d7d7d);
+ hisi_sas_phy_write32(hisi_hba, i, DONE_RECEIVED_TIME, 0x0);
+ hisi_sas_phy_write32(hisi_hba, i, RXOP_CHECK_CFG_H, 0x1000);
+ hisi_sas_phy_write32(hisi_hba, i, DONE_RECEIVED_TIME, 0);
+ hisi_sas_phy_write32(hisi_hba, i, CON_CFG_DRIVER, 0x13f0a);
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT_COAL_EN, 3);
+ hisi_sas_phy_write32(hisi_hba, i, DONE_RECEIVED_TIME, 8);
+ }
+
+ for (i = 0; i < hisi_hba->queue_count; i++) {
+ /* Delivery queue */
+ hisi_sas_write32(hisi_hba,
+ DLVRY_Q_0_BASE_ADDR_HI + (i * 0x14),
+ upper_32_bits(hisi_hba->cmd_hdr_dma[i]));
+
+ hisi_sas_write32(hisi_hba,
+ DLVRY_Q_0_BASE_ADDR_LO + (i * 0x14),
+ lower_32_bits(hisi_hba->cmd_hdr_dma[i]));
+
+ hisi_sas_write32(hisi_hba,
+ DLVRY_Q_0_DEPTH + (i * 0x14),
+ HISI_SAS_QUEUE_SLOTS);
+
+ /* Completion queue */
+ hisi_sas_write32(hisi_hba,
+ COMPL_Q_0_BASE_ADDR_HI + (i * 0x14),
+ upper_32_bits(hisi_hba->complete_hdr_dma[i]));
+
+ hisi_sas_write32(hisi_hba,
+ COMPL_Q_0_BASE_ADDR_LO + (i * 0x14),
+ lower_32_bits(hisi_hba->complete_hdr_dma[i]));
+
+ hisi_sas_write32(hisi_hba, COMPL_Q_0_DEPTH + (i * 0x14),
+ HISI_SAS_QUEUE_SLOTS);
+ }
+
+ /* itct */
+ hisi_sas_write32(hisi_hba, ITCT_BASE_ADDR_LO,
+ lower_32_bits(hisi_hba->itct_dma));
+
+ hisi_sas_write32(hisi_hba, ITCT_BASE_ADDR_HI,
+ upper_32_bits(hisi_hba->itct_dma));
+
+ /* iost */
+ hisi_sas_write32(hisi_hba, IOST_BASE_ADDR_LO,
+ lower_32_bits(hisi_hba->iost_dma));
+
+ hisi_sas_write32(hisi_hba, IOST_BASE_ADDR_HI,
+ upper_32_bits(hisi_hba->iost_dma));
+
+ /* breakpoint */
+ hisi_sas_write32(hisi_hba, BROKEN_MSG_ADDR_LO,
+ lower_32_bits(hisi_hba->breakpoint_dma));
+
+ hisi_sas_write32(hisi_hba, BROKEN_MSG_ADDR_HI,
+ upper_32_bits(hisi_hba->breakpoint_dma));
+}
+
+static int hw_init_v1_hw(struct hisi_hba *hisi_hba)
+{
+ struct device *dev = &hisi_hba->pdev->dev;
+ int rc;
+
+ rc = reset_hw_v1_hw(hisi_hba);
+ if (rc) {
+ dev_err(dev, "hisi_sas_reset_hw failed, rc=%d", rc);
+ return rc;
+ }
+
+ msleep(100);
+ init_reg_v1_hw(hisi_hba);
+
+ init_id_frame_v1_hw(hisi_hba);
+
+ return 0;
+}
+
+static void enable_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG);
+
+ cfg |= PHY_CFG_ENA_MSK;
+ hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg);
+}
+
+static void disable_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG);
+
+ cfg &= ~PHY_CFG_ENA_MSK;
+ hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg);
+}
+
+static void start_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ config_id_frame_v1_hw(hisi_hba, phy_no);
+ config_phy_opt_mode_v1_hw(hisi_hba, phy_no);
+ config_tx_tfe_autoneg_v1_hw(hisi_hba, phy_no);
+ enable_phy_v1_hw(hisi_hba, phy_no);
+}
+
+static void stop_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ disable_phy_v1_hw(hisi_hba, phy_no);
+}
+
+static void phy_hard_reset_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ stop_phy_v1_hw(hisi_hba, phy_no);
+ msleep(100);
+ start_phy_v1_hw(hisi_hba, phy_no);
+}
+
+static void start_phys_v1_hw(unsigned long data)
+{
+ struct hisi_hba *hisi_hba = (struct hisi_hba *)data;
+ int i;
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0x12a);
+ start_phy_v1_hw(hisi_hba, i);
+ }
+}
+
+static void phys_init_v1_hw(struct hisi_hba *hisi_hba)
+{
+ int i;
+ struct timer_list *timer = &hisi_hba->timer;
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0x6a);
+ hisi_sas_phy_read32(hisi_hba, i, CHL_INT2_MSK);
+ }
+
+ setup_timer(timer, start_phys_v1_hw, (unsigned long)hisi_hba);
+ mod_timer(timer, jiffies + HZ);
+}
+
+static void sl_notify_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ u32 sl_control;
+
+ sl_control = hisi_sas_phy_read32(hisi_hba, phy_no, SL_CONTROL);
+ sl_control |= SL_CONTROL_NOTIFY_EN_MSK;
+ hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL, sl_control);
+ msleep(1);
+ sl_control = hisi_sas_phy_read32(hisi_hba, phy_no, SL_CONTROL);
+ sl_control &= ~SL_CONTROL_NOTIFY_EN_MSK;
+ hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL, sl_control);
+}
+
+static int get_wideport_bitmap_v1_hw(struct hisi_hba *hisi_hba, int port_id)
+{
+ int i, bitmap = 0;
+ u32 phy_port_num_ma = hisi_sas_read32(hisi_hba, PHY_PORT_NUM_MA);
+
+ for (i = 0; i < hisi_hba->n_phy; i++)
+ if (((phy_port_num_ma >> (i * 4)) & 0xf) == port_id)
+ bitmap |= 1 << i;
+
+ return bitmap;
+}
+
+/**
+ * This function allocates across all queues to load balance.
+ * Slots are allocated from queues in a round-robin fashion.
+ *
+ * The callpath to this function and upto writing the write
+ * queue pointer should be safe from interruption.
+ */
+static int get_free_slot_v1_hw(struct hisi_hba *hisi_hba, int *q, int *s)
+{
+ struct device *dev = &hisi_hba->pdev->dev;
+ u32 r, w;
+ int queue = hisi_hba->queue;
+
+ while (1) {
+ w = hisi_sas_read32_relaxed(hisi_hba,
+ DLVRY_Q_0_WR_PTR + (queue * 0x14));
+ r = hisi_sas_read32_relaxed(hisi_hba,
+ DLVRY_Q_0_RD_PTR + (queue * 0x14));
+ if (r == (w+1) % HISI_SAS_QUEUE_SLOTS) {
+ queue = (queue + 1) % hisi_hba->queue_count;
+ if (queue == hisi_hba->queue) {
+ dev_warn(dev, "could not find free slot\n");
+ return -EAGAIN;
+ }
+ continue;
+ }
+ break;
+ }
+ hisi_hba->queue = (queue + 1) % hisi_hba->queue_count;
+ *q = queue;
+ *s = w;
+ return 0;
+}
+
+static void start_delivery_v1_hw(struct hisi_hba *hisi_hba)
+{
+ int dlvry_queue = hisi_hba->slot_prep->dlvry_queue;
+ int dlvry_queue_slot = hisi_hba->slot_prep->dlvry_queue_slot;
+
+ hisi_sas_write32(hisi_hba,
+ DLVRY_Q_0_WR_PTR + (dlvry_queue * 0x14),
+ ++dlvry_queue_slot % HISI_SAS_QUEUE_SLOTS);
+}
+
+static int prep_prd_sge_v1_hw(struct hisi_hba *hisi_hba,
+ struct hisi_sas_slot *slot,
+ struct hisi_sas_cmd_hdr *hdr,
+ struct scatterlist *scatter,
+ int n_elem)
+{
+ struct device *dev = &hisi_hba->pdev->dev;
+ struct scatterlist *sg;
+ int i;
+
+ if (n_elem > HISI_SAS_SGE_PAGE_CNT) {
+ dev_err(dev, "prd err: n_elem(%d) > HISI_SAS_SGE_PAGE_CNT",
+ n_elem);
+ return -EINVAL;
+ }
+
+ slot->sge_page = dma_pool_alloc(hisi_hba->sge_page_pool, GFP_ATOMIC,
+ &slot->sge_page_dma);
+ if (!slot->sge_page)
+ return -ENOMEM;
+
+ for_each_sg(scatter, sg, n_elem, i) {
+ struct hisi_sas_sge *entry = &slot->sge_page->sge[i];
+
+ entry->addr = cpu_to_le64(sg_dma_address(sg));
+ entry->page_ctrl_0 = entry->page_ctrl_1 = 0;
+ entry->data_len = cpu_to_le32(sg_dma_len(sg));
+ entry->data_off = 0;
+ }
+
+ hdr->prd_table_addr = cpu_to_le64(slot->sge_page_dma);
+
+ hdr->sg_len = cpu_to_le32(n_elem << CMD_HDR_DATA_SGL_LEN_OFF);
+
+ return 0;
+}
+
+static int prep_smp_v1_hw(struct hisi_hba *hisi_hba,
+ struct hisi_sas_slot *slot)
+{
+ struct sas_task *task = slot->task;
+ struct hisi_sas_cmd_hdr *hdr = slot->cmd_hdr;
+ struct domain_device *device = task->dev;
+ struct device *dev = &hisi_hba->pdev->dev;
+ struct hisi_sas_port *port = slot->port;
+ struct scatterlist *sg_req, *sg_resp;
+ struct hisi_sas_device *sas_dev = device->lldd_dev;
+ dma_addr_t req_dma_addr;
+ unsigned int req_len, resp_len;
+ int elem, rc;
+
+ /*
+ * DMA-map SMP request, response buffers
+ */
+ /* req */
+ sg_req = &task->smp_task.smp_req;
+ elem = dma_map_sg(dev, sg_req, 1, DMA_TO_DEVICE);
+ if (!elem)
+ return -ENOMEM;
+ req_len = sg_dma_len(sg_req);
+ req_dma_addr = sg_dma_address(sg_req);
+
+ /* resp */
+ sg_resp = &task->smp_task.smp_resp;
+ elem = dma_map_sg(dev, sg_resp, 1, DMA_FROM_DEVICE);
+ if (!elem) {
+ rc = -ENOMEM;
+ goto err_out_req;
+ }
+ resp_len = sg_dma_len(sg_resp);
+ if ((req_len & 0x3) || (resp_len & 0x3)) {
+ rc = -EINVAL;
+ goto err_out_resp;
+ }
+
+ /* create header */
+ /* dw0 */
+ hdr->dw0 = cpu_to_le32((port->id << CMD_HDR_PORT_OFF) |
+ (1 << CMD_HDR_PRIORITY_OFF) | /* high pri */
+ (1 << CMD_HDR_MODE_OFF) | /* ini mode */
+ (2 << CMD_HDR_CMD_OFF)); /* smp */
+
+ /* map itct entry */
+ hdr->dw1 = cpu_to_le32(sas_dev->device_id << CMD_HDR_DEVICE_ID_OFF);
+
+ /* dw2 */
+ hdr->dw2 = cpu_to_le32((((req_len-4)/4) << CMD_HDR_CFL_OFF) |
+ (HISI_SAS_MAX_SMP_RESP_SZ/4 <<
+ CMD_HDR_MRFL_OFF));
+
+ hdr->transfer_tags = cpu_to_le32(slot->idx << CMD_HDR_IPTT_OFF);
+
+ hdr->cmd_table_addr = cpu_to_le64(req_dma_addr);
+ hdr->sts_buffer_addr = cpu_to_le64(slot->status_buffer_dma);
+
+ return 0;
+
+err_out_resp:
+ dma_unmap_sg(dev, &slot->task->smp_task.smp_resp, 1,
+ DMA_FROM_DEVICE);
+err_out_req:
+ dma_unmap_sg(dev, &slot->task->smp_task.smp_req, 1,
+ DMA_TO_DEVICE);
+ return rc;
+}
+
+static int prep_ssp_v1_hw(struct hisi_hba *hisi_hba,
+ struct hisi_sas_slot *slot, int is_tmf,
+ struct hisi_sas_tmf_task *tmf)
+{
+ struct sas_task *task = slot->task;
+ struct hisi_sas_cmd_hdr *hdr = slot->cmd_hdr;
+ struct domain_device *device = task->dev;
+ struct hisi_sas_device *sas_dev = device->lldd_dev;
+ struct hisi_sas_port *port = slot->port;
+ struct sas_ssp_task *ssp_task = &task->ssp_task;
+ struct scsi_cmnd *scsi_cmnd = ssp_task->cmd;
+ int has_data = 0, rc, priority = is_tmf;
+ u8 *buf_cmd, fburst = 0;
+ u32 dw1, dw2;
+
+ /* create header */
+ hdr->dw0 = cpu_to_le32((1 << CMD_HDR_RESP_REPORT_OFF) |
+ (0x2 << CMD_HDR_TLR_CTRL_OFF) |
+ (port->id << CMD_HDR_PORT_OFF) |
+ (priority << CMD_HDR_PRIORITY_OFF) |
+ (1 << CMD_HDR_MODE_OFF) | /* ini mode */
+ (1 << CMD_HDR_CMD_OFF)); /* ssp */
+
+ dw1 = 1 << CMD_HDR_VERIFY_DTL_OFF;
+
+ if (is_tmf) {
+ dw1 |= 3 << CMD_HDR_SSP_FRAME_TYPE_OFF;
+ } else {
+ switch (scsi_cmnd->sc_data_direction) {
+ case DMA_TO_DEVICE:
+ dw1 |= 2 << CMD_HDR_SSP_FRAME_TYPE_OFF;
+ has_data = 1;
+ break;
+ case DMA_FROM_DEVICE:
+ dw1 |= 1 << CMD_HDR_SSP_FRAME_TYPE_OFF;
+ has_data = 1;
+ break;
+ default:
+ dw1 |= 0 << CMD_HDR_SSP_FRAME_TYPE_OFF;
+ }
+ }
+
+ /* map itct entry */
+ dw1 |= sas_dev->device_id << CMD_HDR_DEVICE_ID_OFF;
+ hdr->dw1 = cpu_to_le32(dw1);
+
+ if (is_tmf) {
+ dw2 = ((sizeof(struct ssp_tmf_iu) +
+ sizeof(struct ssp_frame_hdr)+3)/4) <<
+ CMD_HDR_CFL_OFF;
+ } else {
+ dw2 = ((sizeof(struct ssp_command_iu) +
+ sizeof(struct ssp_frame_hdr)+3)/4) <<
+ CMD_HDR_CFL_OFF;
+ }
+
+ dw2 |= (HISI_SAS_MAX_SSP_RESP_SZ/4) << CMD_HDR_MRFL_OFF;
+
+ hdr->transfer_tags = cpu_to_le32(slot->idx << CMD_HDR_IPTT_OFF);
+
+ if (has_data) {
+ rc = prep_prd_sge_v1_hw(hisi_hba, slot, hdr, task->scatter,
+ slot->n_elem);
+ if (rc)
+ return rc;
+ }
+
+ hdr->data_transfer_len = cpu_to_le32(task->total_xfer_len);
+ hdr->cmd_table_addr = cpu_to_le64(slot->command_table_dma);
+ hdr->sts_buffer_addr = cpu_to_le64(slot->status_buffer_dma);
+
+ buf_cmd = slot->command_table + sizeof(struct ssp_frame_hdr);
+ if (task->ssp_task.enable_first_burst) {
+ fburst = (1 << 7);
+ dw2 |= 1 << CMD_HDR_FIRST_BURST_OFF;
+ }
+ hdr->dw2 = cpu_to_le32(dw2);
+
+ memcpy(buf_cmd, &task->ssp_task.LUN, 8);
+ if (!is_tmf) {
+ buf_cmd[9] = fburst | task->ssp_task.task_attr |
+ (task->ssp_task.task_prio << 3);
+ memcpy(buf_cmd + 12, task->ssp_task.cmd->cmnd,
+ task->ssp_task.cmd->cmd_len);
+ } else {
+ buf_cmd[10] = tmf->tmf;
+ switch (tmf->tmf) {
+ case TMF_ABORT_TASK:
+ case TMF_QUERY_TASK:
+ buf_cmd[12] =
+ (tmf->tag_of_task_to_be_managed >> 8) & 0xff;
+ buf_cmd[13] =
+ tmf->tag_of_task_to_be_managed & 0xff;
+ break;
+ default:
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/* by default, task resp is complete */
+static void slot_err_v1_hw(struct hisi_hba *hisi_hba,
+ struct sas_task *task,
+ struct hisi_sas_slot *slot)
+{
+ struct task_status_struct *ts = &task->task_status;
+ struct hisi_sas_err_record *err_record = slot->status_buffer;
+ struct device *dev = &hisi_hba->pdev->dev;
+
+ switch (task->task_proto) {
+ case SAS_PROTOCOL_SSP:
+ {
+ int error = -1;
+ u32 dma_err_type = cpu_to_le32(err_record->dma_err_type);
+ u32 dma_tx_err_type = ((dma_err_type &
+ ERR_HDR_DMA_TX_ERR_TYPE_MSK)) >>
+ ERR_HDR_DMA_TX_ERR_TYPE_OFF;
+ u32 dma_rx_err_type = ((dma_err_type &
+ ERR_HDR_DMA_RX_ERR_TYPE_MSK)) >>
+ ERR_HDR_DMA_RX_ERR_TYPE_OFF;
+ u32 trans_tx_fail_type =
+ cpu_to_le32(err_record->trans_tx_fail_type);
+ u32 trans_rx_fail_type =
+ cpu_to_le32(err_record->trans_rx_fail_type);
+
+ if (dma_tx_err_type) {
+ /* dma tx err */
+ error = ffs(dma_tx_err_type)
+ - 1 + DMA_TX_ERR_BASE;
+ } else if (dma_rx_err_type) {
+ /* dma rx err */
+ error = ffs(dma_rx_err_type)
+ - 1 + DMA_RX_ERR_BASE;
+ } else if (trans_tx_fail_type) {
+ /* trans tx err */
+ error = ffs(trans_tx_fail_type)
+ - 1 + TRANS_TX_FAIL_BASE;
+ } else if (trans_rx_fail_type) {
+ /* trans rx err */
+ error = ffs(trans_rx_fail_type)
+ - 1 + TRANS_RX_FAIL_BASE;
+ }
+
+ switch (error) {
+ case DMA_TX_DATA_UNDERFLOW_ERR:
+ case DMA_RX_DATA_UNDERFLOW_ERR:
+ {
+ ts->residual = 0;
+ ts->stat = SAS_DATA_UNDERRUN;
+ break;
+ }
+ case DMA_TX_DATA_SGL_OVERFLOW_ERR:
+ case DMA_TX_DIF_SGL_OVERFLOW_ERR:
+ case DMA_TX_XFER_RDY_LENGTH_OVERFLOW_ERR:
+ case DMA_RX_DATA_OVERFLOW_ERR:
+ case TRANS_RX_FRAME_OVERRUN_ERR:
+ case TRANS_RX_LINK_BUF_OVERRUN_ERR:
+ {
+ ts->stat = SAS_DATA_OVERRUN;
+ ts->residual = 0;
+ break;
+ }
+ case TRANS_TX_PHY_NOT_ENABLE_ERR:
+ {
+ ts->stat = SAS_PHY_DOWN;
+ break;
+ }
+ case TRANS_TX_OPEN_REJCT_WRONG_DEST_ERR:
+ case TRANS_TX_OPEN_REJCT_ZONE_VIOLATION_ERR:
+ case TRANS_TX_OPEN_REJCT_BY_OTHER_ERR:
+ case TRANS_TX_OPEN_REJCT_AIP_TIMEOUT_ERR:
+ case TRANS_TX_OPEN_REJCT_STP_BUSY_ERR:
+ case TRANS_TX_OPEN_REJCT_PROTOCOL_NOT_SUPPORT_ERR:
+ case TRANS_TX_OPEN_REJCT_RATE_NOT_SUPPORT_ERR:
+ case TRANS_TX_OPEN_REJCT_BAD_DEST_ERR:
+ case TRANS_TX_OPEN_BREAK_RECEIVE_ERR:
+ case TRANS_TX_OPEN_REJCT_PATHWAY_BLOCKED_ERR:
+ case TRANS_TX_OPEN_REJCT_NO_DEST_ERR:
+ case TRANS_TX_OPEN_RETRY_ERR:
+ {
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ break;
+ }
+ case TRANS_TX_OPEN_TIMEOUT_ERR:
+ {
+ ts->stat = SAS_OPEN_TO;
+ break;
+ }
+ case TRANS_TX_NAK_RECEIVE_ERR:
+ case TRANS_TX_ACK_NAK_TIMEOUT_ERR:
+ {
+ ts->stat = SAS_NAK_R_ERR;
+ break;
+ }
+ default:
+ {
+ ts->stat = SAM_STAT_CHECK_CONDITION;
+ break;
+ }
+ }
+ }
+ break;
+ case SAS_PROTOCOL_SMP:
+ ts->stat = SAM_STAT_CHECK_CONDITION;
+ break;
+
+ case SAS_PROTOCOL_SATA:
+ case SAS_PROTOCOL_STP:
+ case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
+ {
+ dev_err(dev, "slot err: SATA/STP not supported");
+ }
+ break;
+ default:
+ break;
+ }
+
+}
+
+static int slot_complete_v1_hw(struct hisi_hba *hisi_hba,
+ struct hisi_sas_slot *slot, int abort)
+{
+ struct sas_task *task = slot->task;
+ struct hisi_sas_device *sas_dev;
+ struct device *dev = &hisi_hba->pdev->dev;
+ struct task_status_struct *ts;
+ struct domain_device *device;
+ enum exec_status sts;
+ struct hisi_sas_complete_v1_hdr *complete_queue =
+ (struct hisi_sas_complete_v1_hdr *)
+ hisi_hba->complete_hdr[slot->cmplt_queue];
+ struct hisi_sas_complete_v1_hdr *complete_hdr;
+ u32 cmplt_hdr_data;
+
+ complete_hdr = &complete_queue[slot->cmplt_queue_slot];
+ cmplt_hdr_data = le32_to_cpu(complete_hdr->data);
+
+ if (unlikely(!task || !task->lldd_task || !task->dev))
+ return -EINVAL;
+
+ ts = &task->task_status;
+ device = task->dev;
+ sas_dev = device->lldd_dev;
+
+ task->task_state_flags &=
+ ~(SAS_TASK_STATE_PENDING | SAS_TASK_AT_INITIATOR);
+ task->task_state_flags |= SAS_TASK_STATE_DONE;
+
+ memset(ts, 0, sizeof(*ts));
+ ts->resp = SAS_TASK_COMPLETE;
+
+ if (unlikely(!sas_dev || abort)) {
+ if (!sas_dev)
+ dev_dbg(dev, "slot complete: port has not device\n");
+ ts->stat = SAS_PHY_DOWN;
+ goto out;
+ }
+
+ if (cmplt_hdr_data & CMPLT_HDR_IO_CFG_ERR_MSK) {
+ u32 info_reg = hisi_sas_read32(hisi_hba, HGC_INVLD_DQE_INFO);
+
+ if (info_reg & HGC_INVLD_DQE_INFO_DQ_MSK)
+ dev_err(dev, "slot complete: [%d:%d] has dq IPTT err",
+ slot->cmplt_queue, slot->cmplt_queue_slot);
+
+ if (info_reg & HGC_INVLD_DQE_INFO_TYPE_MSK)
+ dev_err(dev, "slot complete: [%d:%d] has dq type err",
+ slot->cmplt_queue, slot->cmplt_queue_slot);
+
+ if (info_reg & HGC_INVLD_DQE_INFO_FORCE_MSK)
+ dev_err(dev, "slot complete: [%d:%d] has dq force phy err",
+ slot->cmplt_queue, slot->cmplt_queue_slot);
+
+ if (info_reg & HGC_INVLD_DQE_INFO_PHY_MSK)
+ dev_err(dev, "slot complete: [%d:%d] has dq phy id err",
+ slot->cmplt_queue, slot->cmplt_queue_slot);
+
+ if (info_reg & HGC_INVLD_DQE_INFO_ABORT_MSK)
+ dev_err(dev, "slot complete: [%d:%d] has dq abort flag err",
+ slot->cmplt_queue, slot->cmplt_queue_slot);
+
+ if (info_reg & HGC_INVLD_DQE_INFO_IPTT_OF_MSK)
+ dev_err(dev, "slot complete: [%d:%d] has dq IPTT or ICT err",
+ slot->cmplt_queue, slot->cmplt_queue_slot);
+
+ if (info_reg & HGC_INVLD_DQE_INFO_SSP_ERR_MSK)
+ dev_err(dev, "slot complete: [%d:%d] has dq SSP frame type err",
+ slot->cmplt_queue, slot->cmplt_queue_slot);
+
+ if (info_reg & HGC_INVLD_DQE_INFO_OFL_MSK)
+ dev_err(dev, "slot complete: [%d:%d] has dq order frame len err",
+ slot->cmplt_queue, slot->cmplt_queue_slot);
+
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ goto out;
+ }
+
+ if (cmplt_hdr_data & CMPLT_HDR_ERR_RCRD_XFRD_MSK) {
+ if (!(cmplt_hdr_data & CMPLT_HDR_CMD_CMPLT_MSK) ||
+ !(cmplt_hdr_data & CMPLT_HDR_RSPNS_XFRD_MSK))
+ ts->stat = SAS_DATA_OVERRUN;
+ else
+ slot_err_v1_hw(hisi_hba, task, slot);
+
+ goto out;
+ }
+
+ switch (task->task_proto) {
+ case SAS_PROTOCOL_SSP:
+ {
+ struct ssp_response_iu *iu = slot->status_buffer +
+ sizeof(struct hisi_sas_err_record);
+ sas_ssp_task_response(dev, task, iu);
+ break;
+ }
+ case SAS_PROTOCOL_SMP:
+ {
+ void *to;
+ struct scatterlist *sg_resp = &task->smp_task.smp_resp;
+
+ ts->stat = SAM_STAT_GOOD;
+ to = kmap_atomic(sg_page(sg_resp));
+
+ dma_unmap_sg(dev, &task->smp_task.smp_resp, 1,
+ DMA_FROM_DEVICE);
+ dma_unmap_sg(dev, &task->smp_task.smp_req, 1,
+ DMA_TO_DEVICE);
+ memcpy(to + sg_resp->offset,
+ slot->status_buffer +
+ sizeof(struct hisi_sas_err_record),
+ sg_dma_len(sg_resp));
+ kunmap_atomic(to);
+ break;
+ }
+ case SAS_PROTOCOL_SATA:
+ case SAS_PROTOCOL_STP:
+ case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
+ dev_err(dev, "slot complete: SATA/STP not supported");
+ break;
+
+ default:
+ ts->stat = SAM_STAT_CHECK_CONDITION;
+ break;
+ }
+
+ if (!slot->port->port_attached) {
+ dev_err(dev, "slot complete: port %d has removed\n",
+ slot->port->sas_port.id);
+ ts->stat = SAS_PHY_DOWN;
+ }
+
+out:
+ if (sas_dev && sas_dev->running_req)
+ sas_dev->running_req--;
+
+ hisi_sas_slot_task_free(hisi_hba, task, slot);
+ sts = ts->stat;
+
+ if (task->task_done)
+ task->task_done(task);
+
+ return sts;
+}
+
+/* Interrupts */
+static irqreturn_t int_phyup_v1_hw(int irq_no, void *p)
+{
+ struct hisi_sas_phy *phy = p;
+ struct hisi_hba *hisi_hba = phy->hisi_hba;
+ struct device *dev = &hisi_hba->pdev->dev;
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ int i, phy_no = sas_phy->id;
+ u32 irq_value, context, port_id, link_rate;
+ u32 *frame_rcvd = (u32 *)sas_phy->frame_rcvd;
+ struct sas_identify_frame *id = (struct sas_identify_frame *)frame_rcvd;
+ irqreturn_t res = IRQ_HANDLED;
+
+ irq_value = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT2);
+ if (!(irq_value & CHL_INT2_SL_PHY_ENA_MSK)) {
+ dev_dbg(dev, "phyup: irq_value = %x not set enable bit\n",
+ irq_value);
+ res = IRQ_NONE;
+ goto end;
+ }
+
+ context = hisi_sas_read32(hisi_hba, PHY_CONTEXT);
+ if (context & 1 << phy_no) {
+ dev_err(dev, "phyup: phy%d SATA attached equipment\n",
+ phy_no);
+ goto end;
+ }
+
+ port_id = (hisi_sas_read32(hisi_hba, PHY_PORT_NUM_MA) >> (4 * phy_no))
+ & 0xf;
+ if (port_id == 0xf) {
+ dev_err(dev, "phyup: phy%d invalid portid\n", phy_no);
+ res = IRQ_NONE;
+ goto end;
+ }
+
+ for (i = 0; i < 6; i++) {
+ u32 idaf = hisi_sas_phy_read32(hisi_hba, phy_no,
+ RX_IDAF_DWORD0 + (i * 4));
+ frame_rcvd[i] = __swab32(idaf);
+ }
+
+ /* Get the linkrate */
+ link_rate = hisi_sas_read32(hisi_hba, PHY_CONN_RATE);
+ link_rate = (link_rate >> (phy_no * 4)) & 0xf;
+ sas_phy->linkrate = link_rate;
+ sas_phy->oob_mode = SAS_OOB_MODE;
+ memcpy(sas_phy->attached_sas_addr,
+ &id->sas_addr, SAS_ADDR_SIZE);
+ dev_info(dev, "phyup: phy%d link_rate=%d\n",
+ phy_no, link_rate);
+ phy->port_id = port_id;
+ phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
+ phy->phy_type |= PORT_TYPE_SAS;
+ phy->phy_attached = 1;
+ phy->identify.device_type = id->dev_type;
+ phy->frame_rcvd_size = sizeof(struct sas_identify_frame);
+ if (phy->identify.device_type == SAS_END_DEVICE)
+ phy->identify.target_port_protocols =
+ SAS_PROTOCOL_SSP;
+ else if (phy->identify.device_type != SAS_PHY_UNUSED)
+ phy->identify.target_port_protocols =
+ SAS_PROTOCOL_SMP;
+ queue_work(hisi_hba->wq, &phy->phyup_ws);
+
+end:
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT2,
+ CHL_INT2_SL_PHY_ENA_MSK);
+
+ if (irq_value & CHL_INT2_SL_PHY_ENA_MSK) {
+ u32 chl_int0 = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT0);
+
+ chl_int0 &= ~CHL_INT0_PHYCTRL_NOTRDY_MSK;
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0, chl_int0);
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0_MSK, 0x3ce3ee);
+ }
+
+ return res;
+}
+
+static irqreturn_t int_bcast_v1_hw(int irq, void *p)
+{
+ struct hisi_sas_phy *phy = p;
+ struct hisi_hba *hisi_hba = phy->hisi_hba;
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ struct sas_ha_struct *sha = &hisi_hba->sha;
+ struct device *dev = &hisi_hba->pdev->dev;
+ int phy_no = sas_phy->id;
+ u32 irq_value;
+ irqreturn_t res = IRQ_HANDLED;
+
+ irq_value = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT2);
+
+ if (!(irq_value & CHL_INT2_SL_RX_BC_ACK_MSK)) {
+ dev_err(dev, "bcast: irq_value = %x not set enable bit",
+ irq_value);
+ res = IRQ_NONE;
+ goto end;
+ }
+
+ sha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
+
+end:
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT2,
+ CHL_INT2_SL_RX_BC_ACK_MSK);
+
+ return res;
+}
+
+static irqreturn_t int_abnormal_v1_hw(int irq, void *p)
+{
+ struct hisi_sas_phy *phy = p;
+ struct hisi_hba *hisi_hba = phy->hisi_hba;
+ struct device *dev = &hisi_hba->pdev->dev;
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ u32 irq_value, irq_mask_old;
+ int phy_no = sas_phy->id;
+
+ /* mask_int0 */
+ irq_mask_old = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT0_MSK);
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0_MSK, 0x3fffff);
+
+ /* read int0 */
+ irq_value = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT0);
+
+ if (irq_value & CHL_INT0_PHYCTRL_NOTRDY_MSK) {
+ u32 phy_state = hisi_sas_read32(hisi_hba, PHY_STATE);
+
+ hisi_sas_phy_down(hisi_hba, phy_no,
+ (phy_state & 1 << phy_no) ? 1 : 0);
+ }
+
+ if (irq_value & CHL_INT0_ID_TIMEOUT_MSK)
+ dev_dbg(dev, "abnormal: ID_TIMEOUT phy%d identify timeout\n",
+ phy_no);
+
+ if (irq_value & CHL_INT0_DWS_LOST_MSK)
+ dev_dbg(dev, "abnormal: DWS_LOST phy%d dws lost\n", phy_no);
+
+ if (irq_value & CHL_INT0_SN_FAIL_NGR_MSK)
+ dev_dbg(dev, "abnormal: SN_FAIL_NGR phy%d sn fail ngr\n",
+ phy_no);
+
+ if (irq_value & CHL_INT0_SL_IDAF_FAIL_MSK ||
+ irq_value & CHL_INT0_SL_OPAF_FAIL_MSK)
+ dev_dbg(dev, "abnormal: SL_ID/OPAF_FAIL phy%d check adr frm err\n",
+ phy_no);
+
+ if (irq_value & CHL_INT0_SL_PS_FAIL_OFF)
+ dev_dbg(dev, "abnormal: SL_PS_FAIL phy%d fail\n", phy_no);
+
+ /* write to zero */
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0, irq_value);
+
+ if (irq_value & CHL_INT0_PHYCTRL_NOTRDY_MSK)
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0_MSK,
+ 0x3fffff & ~CHL_INT0_MSK_PHYCTRL_NOTRDY_MSK);
+ else
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0_MSK,
+ irq_mask_old);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t cq_interrupt_v1_hw(int irq, void *p)
+{
+ struct hisi_sas_cq *cq = p;
+ struct hisi_hba *hisi_hba = cq->hisi_hba;
+ struct hisi_sas_slot *slot;
+ int queue = cq->id;
+ struct hisi_sas_complete_v1_hdr *complete_queue =
+ (struct hisi_sas_complete_v1_hdr *)
+ hisi_hba->complete_hdr[queue];
+ u32 irq_value, rd_point, wr_point;
+
+ irq_value = hisi_sas_read32(hisi_hba, OQ_INT_SRC);
+
+ hisi_sas_write32(hisi_hba, OQ_INT_SRC, 1 << queue);
+
+ rd_point = hisi_sas_read32(hisi_hba,
+ COMPL_Q_0_RD_PTR + (0x14 * queue));
+ wr_point = hisi_sas_read32(hisi_hba,
+ COMPL_Q_0_WR_PTR + (0x14 * queue));
+
+ while (rd_point != wr_point) {
+ struct hisi_sas_complete_v1_hdr *complete_hdr;
+ int idx;
+ u32 cmplt_hdr_data;
+
+ complete_hdr = &complete_queue[rd_point];
+ cmplt_hdr_data = cpu_to_le32(complete_hdr->data);
+ idx = (cmplt_hdr_data & CMPLT_HDR_IPTT_MSK) >>
+ CMPLT_HDR_IPTT_OFF;
+ slot = &hisi_hba->slot_info[idx];
+
+ /* The completion queue and queue slot index are not
+ * necessarily the same as the delivery queue and
+ * queue slot index.
+ */
+ slot->cmplt_queue_slot = rd_point;
+ slot->cmplt_queue = queue;
+ slot_complete_v1_hw(hisi_hba, slot, 0);
+
+ if (++rd_point >= HISI_SAS_QUEUE_SLOTS)
+ rd_point = 0;
+ }
+
+ /* update rd_point */
+ hisi_sas_write32(hisi_hba, COMPL_Q_0_RD_PTR + (0x14 * queue), rd_point);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t fatal_ecc_int_v1_hw(int irq, void *p)
+{
+ struct hisi_hba *hisi_hba = p;
+ struct device *dev = &hisi_hba->pdev->dev;
+ u32 ecc_int = hisi_sas_read32(hisi_hba, SAS_ECC_INTR);
+
+ if (ecc_int & SAS_ECC_INTR_DQ_ECC1B_MSK) {
+ u32 ecc_err = hisi_sas_read32(hisi_hba, HGC_ECC_ERR);
+
+ panic("%s: Fatal DQ 1b ECC interrupt (0x%x)\n",
+ dev_name(dev), ecc_err);
+ }
+
+ if (ecc_int & SAS_ECC_INTR_DQ_ECCBAD_MSK) {
+ u32 addr = (hisi_sas_read32(hisi_hba, HGC_DQ_ECC_ADDR) &
+ HGC_DQ_ECC_ADDR_BAD_MSK) >>
+ HGC_DQ_ECC_ADDR_BAD_OFF;
+
+ panic("%s: Fatal DQ RAM ECC interrupt @ 0x%08x\n",
+ dev_name(dev), addr);
+ }
+
+ if (ecc_int & SAS_ECC_INTR_IOST_ECC1B_MSK) {
+ u32 ecc_err = hisi_sas_read32(hisi_hba, HGC_ECC_ERR);
+
+ panic("%s: Fatal IOST 1b ECC interrupt (0x%x)\n",
+ dev_name(dev), ecc_err);
+ }
+
+ if (ecc_int & SAS_ECC_INTR_IOST_ECCBAD_MSK) {
+ u32 addr = (hisi_sas_read32(hisi_hba, HGC_IOST_ECC_ADDR) &
+ HGC_IOST_ECC_ADDR_BAD_MSK) >>
+ HGC_IOST_ECC_ADDR_BAD_OFF;
+
+ panic("%s: Fatal IOST RAM ECC interrupt @ 0x%08x\n",
+ dev_name(dev), addr);
+ }
+
+ if (ecc_int & SAS_ECC_INTR_ITCT_ECCBAD_MSK) {
+ u32 addr = (hisi_sas_read32(hisi_hba, HGC_ITCT_ECC_ADDR) &
+ HGC_ITCT_ECC_ADDR_BAD_MSK) >>
+ HGC_ITCT_ECC_ADDR_BAD_OFF;
+
+ panic("%s: Fatal TCT RAM ECC interrupt @ 0x%08x\n",
+ dev_name(dev), addr);
+ }
+
+ if (ecc_int & SAS_ECC_INTR_ITCT_ECC1B_MSK) {
+ u32 ecc_err = hisi_sas_read32(hisi_hba, HGC_ECC_ERR);
+
+ panic("%s: Fatal ITCT 1b ECC interrupt (0x%x)\n",
+ dev_name(dev), ecc_err);
+ }
+
+ hisi_sas_write32(hisi_hba, SAS_ECC_INTR, ecc_int | 0x3f);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t fatal_axi_int_v1_hw(int irq, void *p)
+{
+ struct hisi_hba *hisi_hba = p;
+ struct device *dev = &hisi_hba->pdev->dev;
+ u32 axi_int = hisi_sas_read32(hisi_hba, ENT_INT_SRC2);
+ u32 axi_info = hisi_sas_read32(hisi_hba, HGC_AXI_FIFO_ERR_INFO);
+
+ if (axi_int & ENT_INT_SRC2_DQ_CFG_ERR_MSK)
+ panic("%s: Fatal DQ_CFG_ERR interrupt (0x%x)\n",
+ dev_name(dev), axi_info);
+
+ if (axi_int & ENT_INT_SRC2_CQ_CFG_ERR_MSK)
+ panic("%s: Fatal CQ_CFG_ERR interrupt (0x%x)\n",
+ dev_name(dev), axi_info);
+
+ if (axi_int & ENT_INT_SRC2_AXI_WRONG_INT_MSK)
+ panic("%s: Fatal AXI_WRONG_INT interrupt (0x%x)\n",
+ dev_name(dev), axi_info);
+
+ if (axi_int & ENT_INT_SRC2_AXI_OVERLF_INT_MSK)
+ panic("%s: Fatal AXI_OVERLF_INT incorrect interrupt (0x%x)\n",
+ dev_name(dev), axi_info);
+
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC2, axi_int | 0x30000000);
+
+ return IRQ_HANDLED;
+}
+
+static irq_handler_t phy_interrupts[HISI_SAS_PHY_INT_NR] = {
+ int_bcast_v1_hw,
+ int_phyup_v1_hw,
+ int_abnormal_v1_hw
+};
+
+static irq_handler_t fatal_interrupts[HISI_SAS_MAX_QUEUES] = {
+ fatal_ecc_int_v1_hw,
+ fatal_axi_int_v1_hw
+};
+
+static int interrupt_init_v1_hw(struct hisi_hba *hisi_hba)
+{
+ struct platform_device *pdev = hisi_hba->pdev;
+ struct device *dev = &pdev->dev;
+ int i, j, irq, rc, idx;
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ struct hisi_sas_phy *phy = &hisi_hba->phy[i];
+
+ idx = i * HISI_SAS_PHY_INT_NR;
+ for (j = 0; j < HISI_SAS_PHY_INT_NR; j++, idx++) {
+ irq = platform_get_irq(pdev, idx);
+ if (!irq) {
+ dev_err(dev,
+ "irq init: fail map phy interrupt %d\n",
+ idx);
+ return -ENOENT;
+ }
+
+ rc = devm_request_irq(dev, irq, phy_interrupts[j], 0,
+ DRV_NAME " phy", phy);
+ if (rc) {
+ dev_err(dev, "irq init: could not request "
+ "phy interrupt %d, rc=%d\n",
+ irq, rc);
+ return -ENOENT;
+ }
+ }
+ }
+
+ idx = hisi_hba->n_phy * HISI_SAS_PHY_INT_NR;
+ for (i = 0; i < hisi_hba->queue_count; i++, idx++) {
+ irq = platform_get_irq(pdev, idx);
+ if (!irq) {
+ dev_err(dev, "irq init: could not map cq interrupt %d\n",
+ idx);
+ return -ENOENT;
+ }
+
+ rc = devm_request_irq(dev, irq, cq_interrupt_v1_hw, 0,
+ DRV_NAME " cq", &hisi_hba->cq[i]);
+ if (rc) {
+ dev_err(dev, "irq init: could not request cq interrupt %d, rc=%d\n",
+ irq, rc);
+ return -ENOENT;
+ }
+ }
+
+ idx = (hisi_hba->n_phy * HISI_SAS_PHY_INT_NR) + hisi_hba->queue_count;
+ for (i = 0; i < HISI_SAS_FATAL_INT_NR; i++, idx++) {
+ irq = platform_get_irq(pdev, idx);
+ if (!irq) {
+ dev_err(dev, "irq init: could not map fatal interrupt %d\n",
+ idx);
+ return -ENOENT;
+ }
+
+ rc = devm_request_irq(dev, irq, fatal_interrupts[i], 0,
+ DRV_NAME " fatal", hisi_hba);
+ if (rc) {
+ dev_err(dev,
+ "irq init: could not request fatal interrupt %d, rc=%d\n",
+ irq, rc);
+ return -ENOENT;
+ }
+ }
+
+ return 0;
+}
+
+static int interrupt_openall_v1_hw(struct hisi_hba *hisi_hba)
+{
+ int i;
+ u32 val;
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ /* Clear interrupt status */
+ val = hisi_sas_phy_read32(hisi_hba, i, CHL_INT0);
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT0, val);
+ val = hisi_sas_phy_read32(hisi_hba, i, CHL_INT1);
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT1, val);
+ val = hisi_sas_phy_read32(hisi_hba, i, CHL_INT2);
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT2, val);
+
+ /* Unmask interrupt */
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT0_MSK, 0x3ce3ee);
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT1_MSK, 0x17fff);
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0x8000012a);
+
+ /* bypass chip bug mask abnormal intr */
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT0_MSK,
+ 0x3fffff & ~CHL_INT0_MSK_PHYCTRL_NOTRDY_MSK);
+ }
+
+ return 0;
+}
+
+static int hisi_sas_v1_init(struct hisi_hba *hisi_hba)
+{
+ int rc;
+
+ rc = hw_init_v1_hw(hisi_hba);
+ if (rc)
+ return rc;
+
+ rc = interrupt_init_v1_hw(hisi_hba);
+ if (rc)
+ return rc;
+
+ rc = interrupt_openall_v1_hw(hisi_hba);
+ if (rc)
+ return rc;
+
+ phys_init_v1_hw(hisi_hba);
+
+ return 0;
+}
+
+static const struct hisi_sas_hw hisi_sas_v1_hw = {
+ .hw_init = hisi_sas_v1_init,
+ .setup_itct = setup_itct_v1_hw,
+ .sl_notify = sl_notify_v1_hw,
+ .free_device = free_device_v1_hw,
+ .prep_smp = prep_smp_v1_hw,
+ .prep_ssp = prep_ssp_v1_hw,
+ .get_free_slot = get_free_slot_v1_hw,
+ .start_delivery = start_delivery_v1_hw,
+ .slot_complete = slot_complete_v1_hw,
+ .phy_enable = enable_phy_v1_hw,
+ .phy_disable = disable_phy_v1_hw,
+ .phy_hard_reset = phy_hard_reset_v1_hw,
+ .get_wideport_bitmap = get_wideport_bitmap_v1_hw,
+ .complete_hdr_size = sizeof(struct hisi_sas_complete_v1_hdr),
+};
+
+static int hisi_sas_v1_probe(struct platform_device *pdev)
+{
+ return hisi_sas_probe(pdev, &hisi_sas_v1_hw);
+}
+
+static int hisi_sas_v1_remove(struct platform_device *pdev)
+{
+ return hisi_sas_remove(pdev);
+}
+
+static const struct of_device_id sas_v1_of_match[] = {
+ { .compatible = "hisilicon,hip05-sas-v1",},
+ {},
+};
+MODULE_DEVICE_TABLE(of, sas_v1_of_match);
+
+static struct platform_driver hisi_sas_v1_driver = {
+ .probe = hisi_sas_v1_probe,
+ .remove = hisi_sas_v1_remove,
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = sas_v1_of_match,
+ },
+};
+
+module_platform_driver(hisi_sas_v1_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("John Garry <john.garry@huawei.com>");
+MODULE_DESCRIPTION("HISILICON SAS controller v1 hw driver");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index a3860367b568..38ce0e308fbe 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -750,7 +750,6 @@ static ssize_t host_show_hp_ssd_smart_path_enabled(struct device *dev,
}
#define MAX_PATHS 8
-
static ssize_t path_info_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -792,10 +791,8 @@ static ssize_t path_info_show(struct device *dev,
hdev->bus, hdev->target, hdev->lun,
scsi_device_type(hdev->devtype));
- if (hdev->external ||
- hdev->devtype == TYPE_RAID ||
- is_logical_device(hdev)) {
- output_len += snprintf(buf + output_len,
+ if (hdev->devtype == TYPE_RAID || is_logical_device(hdev)) {
+ output_len += scnprintf(buf + output_len,
PAGE_SIZE - output_len,
"%s\n", active);
continue;
@@ -808,29 +805,28 @@ static ssize_t path_info_show(struct device *dev,
phys_connector[0] = '0';
if (phys_connector[1] < '0')
phys_connector[1] = '0';
- if (hdev->phys_connector[i] > 0)
- output_len += snprintf(buf + output_len,
+ output_len += scnprintf(buf + output_len,
PAGE_SIZE - output_len,
"PORT: %.2s ",
phys_connector);
if (hdev->devtype == TYPE_DISK && hdev->expose_device) {
if (box == 0 || box == 0xFF) {
- output_len += snprintf(buf + output_len,
+ output_len += scnprintf(buf + output_len,
PAGE_SIZE - output_len,
"BAY: %hhu %s\n",
bay, active);
} else {
- output_len += snprintf(buf + output_len,
+ output_len += scnprintf(buf + output_len,
PAGE_SIZE - output_len,
"BOX: %hhu BAY: %hhu %s\n",
box, bay, active);
}
} else if (box != 0 && box != 0xFF) {
- output_len += snprintf(buf + output_len,
+ output_len += scnprintf(buf + output_len,
PAGE_SIZE - output_len, "BOX: %hhu %s\n",
box, active);
} else
- output_len += snprintf(buf + output_len,
+ output_len += scnprintf(buf + output_len,
PAGE_SIZE - output_len, "%s\n", active);
}
@@ -3191,6 +3187,87 @@ out:
return rc;
}
+/*
+ * get enclosure information
+ * struct ReportExtendedLUNdata *rlep - Used for BMIC drive number
+ * struct hpsa_scsi_dev_t *encl_dev - device entry for enclosure
+ * Uses id_physical_device to determine the box_index.
+ */
+static void hpsa_get_enclosure_info(struct ctlr_info *h,
+ unsigned char *scsi3addr,
+ struct ReportExtendedLUNdata *rlep, int rle_index,
+ struct hpsa_scsi_dev_t *encl_dev)
+{
+ int rc = -1;
+ struct CommandList *c = NULL;
+ struct ErrorInfo *ei = NULL;
+ struct bmic_sense_storage_box_params *bssbp = NULL;
+ struct bmic_identify_physical_device *id_phys = NULL;
+ struct ext_report_lun_entry *rle = &rlep->LUN[rle_index];
+ u16 bmic_device_index = 0;
+
+ bmic_device_index = GET_BMIC_DRIVE_NUMBER(&rle->lunid[0]);
+
+ if (bmic_device_index == 0xFF00)
+ goto out;
+
+ bssbp = kzalloc(sizeof(*bssbp), GFP_KERNEL);
+ if (!bssbp)
+ goto out;
+
+ id_phys = kzalloc(sizeof(*id_phys), GFP_KERNEL);
+ if (!id_phys)
+ goto out;
+
+ rc = hpsa_bmic_id_physical_device(h, scsi3addr, bmic_device_index,
+ id_phys, sizeof(*id_phys));
+ if (rc) {
+ dev_warn(&h->pdev->dev, "%s: id_phys failed %d bdi[0x%x]\n",
+ __func__, encl_dev->external, bmic_device_index);
+ goto out;
+ }
+
+ c = cmd_alloc(h);
+
+ rc = fill_cmd(c, BMIC_SENSE_STORAGE_BOX_PARAMS, h, bssbp,
+ sizeof(*bssbp), 0, RAID_CTLR_LUNID, TYPE_CMD);
+
+ if (rc)
+ goto out;
+
+ if (id_phys->phys_connector[1] == 'E')
+ c->Request.CDB[5] = id_phys->box_index;
+ else
+ c->Request.CDB[5] = 0;
+
+ rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE,
+ NO_TIMEOUT);
+ if (rc)
+ goto out;
+
+ ei = c->err_info;
+ if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
+ rc = -1;
+ goto out;
+ }
+
+ encl_dev->box[id_phys->active_path_number] = bssbp->phys_box_on_port;
+ memcpy(&encl_dev->phys_connector[id_phys->active_path_number],
+ bssbp->phys_connector, sizeof(bssbp->phys_connector));
+
+ rc = IO_OK;
+out:
+ kfree(bssbp);
+ kfree(id_phys);
+
+ if (c)
+ cmd_free(h, c);
+
+ if (rc != IO_OK)
+ hpsa_show_dev_msg(KERN_INFO, h, encl_dev,
+ "Error, could not get enclosure information\n");
+}
+
static u64 hpsa_get_sas_address_from_report_physical(struct ctlr_info *h,
unsigned char *scsi3addr)
{
@@ -4032,7 +4109,8 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h)
/* skip masked non-disk devices */
if (MASKED_DEVICE(lunaddrbytes) && physical_device &&
- (physdev_list->LUN[phys_dev_index].device_flags & 0x01))
+ (physdev_list->LUN[phys_dev_index].device_type != 0x06) &&
+ (physdev_list->LUN[phys_dev_index].device_flags & 0x01))
continue;
/* Get device type, vendor, model, device id */
@@ -4116,7 +4194,12 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h)
break;
case TYPE_TAPE:
case TYPE_MEDIUM_CHANGER:
+ ncurrent++;
+ break;
case TYPE_ENCLOSURE:
+ hpsa_get_enclosure_info(h, lunaddrbytes,
+ physdev_list, phys_dev_index,
+ this_device);
ncurrent++;
break;
case TYPE_RAID:
@@ -6629,6 +6712,16 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
c->Request.CDB[7] = (size >> 16) & 0xFF;
c->Request.CDB[8] = (size >> 8) & 0XFF;
break;
+ case BMIC_SENSE_STORAGE_BOX_PARAMS:
+ c->Request.CDBLen = 10;
+ c->Request.type_attr_dir =
+ TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
+ c->Request.Timeout = 0;
+ c->Request.CDB[0] = BMIC_READ;
+ c->Request.CDB[6] = BMIC_SENSE_STORAGE_BOX_PARAMS;
+ c->Request.CDB[7] = (size >> 16) & 0xFF;
+ c->Request.CDB[8] = (size >> 8) & 0XFF;
+ break;
case BMIC_IDENTIFY_CONTROLLER:
c->Request.CDBLen = 10;
c->Request.type_attr_dir =
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index ae5beda1bdb5..fdd39fc0b199 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -400,7 +400,7 @@ struct offline_device_entry {
#define HPSA_PHYSICAL_DEVICE_BUS 0
#define HPSA_RAID_VOLUME_BUS 1
#define HPSA_EXTERNAL_RAID_VOLUME_BUS 2
-#define HPSA_HBA_BUS 3
+#define HPSA_HBA_BUS 0
/*
Send the command to the hardware
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
index d92ef0d352b5..6a919ada96b3 100644
--- a/drivers/scsi/hpsa_cmd.h
+++ b/drivers/scsi/hpsa_cmd.h
@@ -291,6 +291,7 @@ struct SenseSubsystem_info {
#define BMIC_SENSE_DIAG_OPTIONS 0xF5
#define HPSA_DIAG_OPTS_DISABLE_RLD_CACHING 0x40000000
#define BMIC_SENSE_SUBSYSTEM_INFORMATION 0x66
+#define BMIC_SENSE_STORAGE_BOX_PARAMS 0x65
/* Command List Structure */
union SCSI3Addr {
@@ -842,5 +843,17 @@ struct bmic_sense_subsystem_info {
u8 pad[332];
};
+struct bmic_sense_storage_box_params {
+ u8 reserved[36];
+ u8 inquiry_valid;
+ u8 reserved_1[68];
+ u8 phys_box_on_port;
+ u8 reserved_2[22];
+ u16 connection_info;
+ u8 reserver_3[84];
+ u8 phys_connector[2];
+ u8 reserved_4[296];
+};
+
#pragma pack()
#endif /* HPSA_CMD_H */
diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c
index 6a926bae76b2..7a91cf3ff173 100644
--- a/drivers/scsi/initio.c
+++ b/drivers/scsi/initio.c
@@ -110,11 +110,6 @@
#define i91u_MAXQUEUE 2
#define i91u_REVID "Initio INI-9X00U/UW SCSI device driver; Revision: 1.04a"
-#define I950_DEVICE_ID 0x9500 /* Initio's inic-950 product ID */
-#define I940_DEVICE_ID 0x9400 /* Initio's inic-940 product ID */
-#define I935_DEVICE_ID 0x9401 /* Initio's inic-935 product ID */
-#define I920_DEVICE_ID 0x0002 /* Initio's other product ID */
-
#ifdef DEBUG_i91u
static unsigned int i91u_debug = DEBUG_DEFAULT;
#endif
@@ -127,17 +122,6 @@ static int setup_debug = 0;
static void i91uSCBPost(u8 * pHcb, u8 * pScb);
-/* PCI Devices supported by this driver */
-static struct pci_device_id i91u_pci_devices[] = {
- { PCI_VENDOR_ID_INIT, I950_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { PCI_VENDOR_ID_INIT, I940_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { PCI_VENDOR_ID_INIT, I935_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { PCI_VENDOR_ID_INIT, I920_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { PCI_VENDOR_ID_DOMEX, I920_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { }
-};
-MODULE_DEVICE_TABLE(pci, i91u_pci_devices);
-
#define DEBUG_INTERRUPT 0
#define DEBUG_QUEUE 0
#define DEBUG_STATE 0
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index ceee9a3fd9e5..90a3ca5a4dbd 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -386,7 +386,6 @@ struct lpfc_vport {
uint32_t work_port_events; /* Timeout to be handled */
#define WORKER_DISC_TMO 0x1 /* vport: Discovery timeout */
#define WORKER_ELS_TMO 0x2 /* vport: ELS timeout */
-#define WORKER_FDMI_TMO 0x4 /* vport: FDMI timeout */
#define WORKER_DELAYED_DISC_TMO 0x8 /* vport: delayed discovery */
#define WORKER_MBOX_TMO 0x100 /* hba: MBOX timeout */
@@ -396,7 +395,6 @@ struct lpfc_vport {
#define WORKER_RAMP_UP_QUEUE 0x1000 /* hba: Increase Q depth */
#define WORKER_SERVICE_TXQ 0x2000 /* hba: IOCBs on the txq */
- struct timer_list fc_fdmitmo;
struct timer_list els_tmofunc;
struct timer_list delayed_disc_tmo;
@@ -405,6 +403,7 @@ struct lpfc_vport {
uint8_t load_flag;
#define FC_LOADING 0x1 /* HBA in process of loading drvr */
#define FC_UNLOADING 0x2 /* HBA in process of unloading drvr */
+#define FC_ALLOW_FDMI 0x4 /* port is ready for FDMI requests */
/* Vport Config Parameters */
uint32_t cfg_scan_down;
uint32_t cfg_lun_queue_depth;
@@ -414,10 +413,6 @@ struct lpfc_vport {
uint32_t cfg_peer_port_login;
uint32_t cfg_fcp_class;
uint32_t cfg_use_adisc;
- uint32_t cfg_fdmi_on;
-#define LPFC_FDMI_SUPPORT 1 /* bit 0 - FDMI supported? */
-#define LPFC_FDMI_REG_DELAY 2 /* bit 1 - 60 sec registration delay */
-#define LPFC_FDMI_ALL_ATTRIB 4 /* bit 2 - register ALL attributes? */
uint32_t cfg_discovery_threads;
uint32_t cfg_log_verbose;
uint32_t cfg_max_luns;
@@ -443,6 +438,10 @@ struct lpfc_vport {
unsigned long rcv_buffer_time_stamp;
uint32_t vport_flag;
#define STATIC_VPORT 1
+
+ uint16_t fdmi_num_disc;
+ uint32_t fdmi_hba_mask;
+ uint32_t fdmi_port_mask;
};
struct hbq_s {
@@ -755,6 +754,11 @@ struct lpfc_hba {
#define LPFC_DELAY_INIT_LINK 1 /* layered driver hold off */
#define LPFC_DELAY_INIT_LINK_INDEFINITELY 2 /* wait, manual intervention */
uint32_t cfg_enable_dss;
+ uint32_t cfg_fdmi_on;
+#define LPFC_FDMI_NO_SUPPORT 0 /* FDMI not supported */
+#define LPFC_FDMI_SUPPORT 1 /* FDMI supported? */
+#define LPFC_FDMI_SMART_SAN 2 /* SmartSAN supported */
+ uint32_t cfg_enable_SmartSAN;
lpfc_vpd_t vpd; /* vital product data */
struct pci_dev *pcidev;
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index f6446d759d7f..343ae9482891 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -4572,19 +4572,27 @@ LPFC_ATTR_R(multi_ring_type, FC_TYPE_IP, 1,
255, "Identifies TYPE for additional ring configuration");
/*
-# lpfc_fdmi_on: controls FDMI support.
-# Set NOT Set
-# bit 0 = FDMI support no FDMI support
-# LPFC_FDMI_SUPPORT just turns basic support on/off
-# bit 1 = Register delay no register delay (60 seconds)
-# LPFC_FDMI_REG_DELAY 60 sec registration delay after FDMI login
-# bit 2 = All attributes Use a attribute subset
-# LPFC_FDMI_ALL_ATTRIB applies to both port and HBA attributes
-# Port attrutes subset: 1 thru 6 OR all: 1 thru 0xd 0x101 0x102 0x103
-# HBA attributes subset: 1 thru 0xb OR all: 1 thru 0xc
-# Value range [0,7]. Default value is 0.
+# lpfc_enable_SmartSAN: Sets up FDMI support for SmartSAN
+# 0 = SmartSAN functionality disabled (default)
+# 1 = SmartSAN functionality enabled
+# This parameter will override the value of lpfc_fdmi_on module parameter.
+# Value range is [0,1]. Default value is 0.
*/
-LPFC_VPORT_ATTR_RW(fdmi_on, 0, 0, 7, "Enable FDMI support");
+LPFC_ATTR_R(enable_SmartSAN, 0, 0, 1, "Enable SmartSAN functionality");
+
+/*
+# lpfc_fdmi_on: Controls FDMI support.
+# 0 No FDMI support (default)
+# 1 Traditional FDMI support
+# 2 Smart SAN support
+# If lpfc_enable_SmartSAN is set 1, the driver sets lpfc_fdmi_on to value 2
+# overwriting the current value. If lpfc_enable_SmartSAN is set 0, the
+# driver uses the current value of lpfc_fdmi_on provided it has value 0 or 1.
+# A value of 2 with lpfc_enable_SmartSAN set to 0 causes the driver to
+# set lpfc_fdmi_on back to 1.
+# Value range [0,2]. Default value is 0.
+*/
+LPFC_ATTR_R(fdmi_on, 0, 0, 2, "Enable FDMI support");
/*
# Specifies the maximum number of ELS cmds we can have outstanding (for
@@ -4815,6 +4823,7 @@ struct device_attribute *lpfc_hba_attrs[] = {
&dev_attr_lpfc_multi_ring_rctl,
&dev_attr_lpfc_multi_ring_type,
&dev_attr_lpfc_fdmi_on,
+ &dev_attr_lpfc_enable_SmartSAN,
&dev_attr_lpfc_max_luns,
&dev_attr_lpfc_enable_npiv,
&dev_attr_lpfc_fcf_failover_policy,
@@ -4887,7 +4896,6 @@ struct device_attribute *lpfc_vport_attrs[] = {
&dev_attr_lpfc_fcp_class,
&dev_attr_lpfc_use_adisc,
&dev_attr_lpfc_first_burst_size,
- &dev_attr_lpfc_fdmi_on,
&dev_attr_lpfc_max_luns,
&dev_attr_nport_evt_cnt,
&dev_attr_npiv_info,
@@ -5247,7 +5255,7 @@ lpfc_get_host_speed(struct Scsi_Host *shost)
spin_lock_irq(shost->host_lock);
- if (lpfc_is_link_up(phba)) {
+ if ((lpfc_is_link_up(phba)) && (!(phba->hba_flag & HBA_FCOE_MODE))) {
switch(phba->fc_linkspeed) {
case LPFC_LINK_SPEED_1GHZ:
fc_host_speed(shost) = FC_PORTSPEED_1GBIT;
@@ -5826,6 +5834,8 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
lpfc_enable_npiv_init(phba, lpfc_enable_npiv);
lpfc_fcf_failover_policy_init(phba, lpfc_fcf_failover_policy);
lpfc_enable_rrq_init(phba, lpfc_enable_rrq);
+ lpfc_fdmi_on_init(phba, lpfc_fdmi_on);
+ lpfc_enable_SmartSAN_init(phba, lpfc_enable_SmartSAN);
lpfc_use_msi_init(phba, lpfc_use_msi);
lpfc_fcp_imax_init(phba, lpfc_fcp_imax);
lpfc_fcp_cpu_map_init(phba, lpfc_fcp_cpu_map);
@@ -5846,6 +5856,15 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
phba->cfg_poll = 0;
else
phba->cfg_poll = lpfc_poll;
+
+ /* Ensure fdmi_on and enable_SmartSAN don't conflict */
+ if (phba->cfg_enable_SmartSAN) {
+ phba->cfg_fdmi_on = LPFC_FDMI_SMART_SAN;
+ } else {
+ if (phba->cfg_fdmi_on == LPFC_FDMI_SMART_SAN)
+ phba->cfg_fdmi_on = LPFC_FDMI_SUPPORT;
+ }
+
phba->cfg_soft_wwnn = 0L;
phba->cfg_soft_wwpn = 0L;
lpfc_sg_seg_cnt_init(phba, lpfc_sg_seg_cnt);
@@ -5879,7 +5898,6 @@ lpfc_get_vport_cfgparam(struct lpfc_vport *vport)
lpfc_use_adisc_init(vport, lpfc_use_adisc);
lpfc_first_burst_size_init(vport, lpfc_first_burst_size);
lpfc_max_scsicmpl_time_init(vport, lpfc_max_scsicmpl_time);
- lpfc_fdmi_on_init(vport, lpfc_fdmi_on);
lpfc_discovery_threads_init(vport, lpfc_discovery_threads);
lpfc_max_luns_init(vport, lpfc_max_luns);
lpfc_scan_down_init(vport, lpfc_scan_down);
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index b0e6fe46448d..4e55b35180a4 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -72,6 +72,7 @@ void lpfc_cancel_all_vport_retry_delay_timer(struct lpfc_hba *);
void lpfc_retry_pport_discovery(struct lpfc_hba *);
void lpfc_release_rpi(struct lpfc_hba *, struct lpfc_vport *, uint16_t);
+void lpfc_mbx_cmpl_local_config_link(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_mbx_cmpl_reg_login(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_mbx_cmpl_dflt_rpi(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *, LPFC_MBOXQ_t *);
@@ -167,9 +168,8 @@ void lpfc_ct_unsol_event(struct lpfc_hba *, struct lpfc_sli_ring *,
struct lpfc_iocbq *);
int lpfc_ct_handle_unsol_abort(struct lpfc_hba *, struct hbq_dmabuf *);
int lpfc_ns_cmd(struct lpfc_vport *, int, uint8_t, uint32_t);
-int lpfc_fdmi_cmd(struct lpfc_vport *, struct lpfc_nodelist *, int);
-void lpfc_fdmi_tmo(unsigned long);
-void lpfc_fdmi_timeout_handler(struct lpfc_vport *);
+int lpfc_fdmi_cmd(struct lpfc_vport *, struct lpfc_nodelist *, int, uint32_t);
+void lpfc_fdmi_num_disc_check(struct lpfc_vport *);
void lpfc_delayed_disc_tmo(unsigned long);
void lpfc_delayed_disc_timeout_handler(struct lpfc_vport *);
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index 8fded1f7605f..79e261d2a0c8 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -48,15 +48,26 @@
#include "lpfc_vport.h"
#include "lpfc_debugfs.h"
-/* FDMI Port Speed definitions */
-#define HBA_PORTSPEED_1GBIT 0x0001 /* 1 GBit/sec */
-#define HBA_PORTSPEED_2GBIT 0x0002 /* 2 GBit/sec */
-#define HBA_PORTSPEED_4GBIT 0x0008 /* 4 GBit/sec */
-#define HBA_PORTSPEED_10GBIT 0x0004 /* 10 GBit/sec */
-#define HBA_PORTSPEED_8GBIT 0x0010 /* 8 GBit/sec */
-#define HBA_PORTSPEED_16GBIT 0x0020 /* 16 GBit/sec */
-#define HBA_PORTSPEED_32GBIT 0x0040 /* 32 GBit/sec */
-#define HBA_PORTSPEED_UNKNOWN 0x0800 /* Unknown */
+/* FDMI Port Speed definitions - FC-GS-7 */
+#define HBA_PORTSPEED_1GFC 0x00000001 /* 1G FC */
+#define HBA_PORTSPEED_2GFC 0x00000002 /* 2G FC */
+#define HBA_PORTSPEED_4GFC 0x00000008 /* 4G FC */
+#define HBA_PORTSPEED_10GFC 0x00000004 /* 10G FC */
+#define HBA_PORTSPEED_8GFC 0x00000010 /* 8G FC */
+#define HBA_PORTSPEED_16GFC 0x00000020 /* 16G FC */
+#define HBA_PORTSPEED_32GFC 0x00000040 /* 32G FC */
+#define HBA_PORTSPEED_20GFC 0x00000080 /* 20G FC */
+#define HBA_PORTSPEED_40GFC 0x00000100 /* 40G FC */
+#define HBA_PORTSPEED_128GFC 0x00000200 /* 128G FC */
+#define HBA_PORTSPEED_64GFC 0x00000400 /* 64G FC */
+#define HBA_PORTSPEED_256GFC 0x00000800 /* 256G FC */
+#define HBA_PORTSPEED_UNKNOWN 0x00008000 /* Unknown */
+#define HBA_PORTSPEED_10GE 0x00010000 /* 10G E */
+#define HBA_PORTSPEED_40GE 0x00020000 /* 40G E */
+#define HBA_PORTSPEED_100GE 0x00040000 /* 100G E */
+#define HBA_PORTSPEED_25GE 0x00080000 /* 25G E */
+#define HBA_PORTSPEED_50GE 0x00100000 /* 50G E */
+#define HBA_PORTSPEED_400GE 0x00200000 /* 400G E */
#define FOURBYTES 4
@@ -287,6 +298,17 @@ lpfc_ct_free_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *ctiocb)
return 0;
}
+/**
+ * lpfc_gen_req - Build and issue a GEN_REQUEST command to the SLI Layer
+ * @vport: pointer to a host virtual N_Port data structure.
+ * @bmp: Pointer to BPL for SLI command
+ * @inp: Pointer to data buffer for response data.
+ * @outp: Pointer to data buffer that hold the CT command.
+ * @cmpl: completion routine to call when command completes
+ * @ndlp: Destination NPort nodelist entry
+ *
+ * This function as the final part for issuing a CT command.
+ */
static int
lpfc_gen_req(struct lpfc_vport *vport, struct lpfc_dmabuf *bmp,
struct lpfc_dmabuf *inp, struct lpfc_dmabuf *outp,
@@ -311,7 +333,7 @@ lpfc_gen_req(struct lpfc_vport *vport, struct lpfc_dmabuf *bmp,
icmd->un.genreq64.bdl.addrHigh = putPaddrHigh(bmp->phys);
icmd->un.genreq64.bdl.addrLow = putPaddrLow(bmp->phys);
icmd->un.genreq64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
- icmd->un.genreq64.bdl.bdeSize = (num_entry * sizeof (struct ulp_bde64));
+ icmd->un.genreq64.bdl.bdeSize = (num_entry * sizeof(struct ulp_bde64));
if (usr_flg)
geniocb->context3 = NULL;
@@ -370,6 +392,16 @@ lpfc_gen_req(struct lpfc_vport *vport, struct lpfc_dmabuf *bmp,
return 0;
}
+/**
+ * lpfc_ct_cmd - Build and issue a CT command
+ * @vport: pointer to a host virtual N_Port data structure.
+ * @inmp: Pointer to data buffer for response data.
+ * @bmp: Pointer to BPL for SLI command
+ * @ndlp: Destination NPort nodelist entry
+ * @cmpl: completion routine to call when command completes
+ *
+ * This function is called for issuing a CT command.
+ */
static int
lpfc_ct_cmd(struct lpfc_vport *vport, struct lpfc_dmabuf *inmp,
struct lpfc_dmabuf *bmp, struct lpfc_nodelist *ndlp,
@@ -453,7 +485,7 @@ lpfc_ns_rsp(struct lpfc_vport *vport, struct lpfc_dmabuf *mp, uint32_t Size)
Cnt -= 16; /* subtract length of CT header */
/* Loop through entire NameServer list of DIDs */
- while (Cnt >= sizeof (uint32_t)) {
+ while (Cnt >= sizeof(uint32_t)) {
/* Get next DID from NameServer List */
CTentry = *ctptr++;
Did = ((be32_to_cpu(CTentry)) & Mask_DID);
@@ -558,7 +590,7 @@ lpfc_ns_rsp(struct lpfc_vport *vport, struct lpfc_dmabuf *mp, uint32_t Size)
}
if (CTentry & (cpu_to_be32(SLI_CT_LAST_ENTRY)))
goto nsout1;
- Cnt -= sizeof (uint32_t);
+ Cnt -= sizeof(uint32_t);
}
ctptr = NULL;
@@ -1146,7 +1178,7 @@ lpfc_ns_cmd(struct lpfc_vport *vport, int cmdcode,
/* fill in BDEs for command */
/* Allocate buffer for command payload */
- mp = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL);
+ mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
if (!mp) {
rc=2;
goto ns_cmd_exit;
@@ -1160,7 +1192,7 @@ lpfc_ns_cmd(struct lpfc_vport *vport, int cmdcode,
}
/* Allocate buffer for Buffer ptr list */
- bmp = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL);
+ bmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
if (!bmp) {
rc=4;
goto ns_cmd_free_mpvirt;
@@ -1204,7 +1236,7 @@ lpfc_ns_cmd(struct lpfc_vport *vport, int cmdcode,
bpl->tus.w = le32_to_cpu(bpl->tus.w);
CtReq = (struct lpfc_sli_ct_request *) mp->virt;
- memset(CtReq, 0, sizeof (struct lpfc_sli_ct_request));
+ memset(CtReq, 0, sizeof(struct lpfc_sli_ct_request));
CtReq->RevisionId.bits.Revision = SLI_CT_REVISION;
CtReq->RevisionId.bits.InId = 0;
CtReq->FsType = SLI_CT_DIRECTORY_SERVICE;
@@ -1244,7 +1276,7 @@ lpfc_ns_cmd(struct lpfc_vport *vport, int cmdcode,
cpu_to_be16(SLI_CTNS_RNN_ID);
CtReq->un.rnn.PortId = cpu_to_be32(vport->fc_myDID);
memcpy(CtReq->un.rnn.wwnn, &vport->fc_nodename,
- sizeof (struct lpfc_name));
+ sizeof(struct lpfc_name));
cmpl = lpfc_cmpl_ct_cmd_rnn_id;
break;
@@ -1264,7 +1296,7 @@ lpfc_ns_cmd(struct lpfc_vport *vport, int cmdcode,
CtReq->CommandResponse.bits.CmdRsp =
cpu_to_be16(SLI_CTNS_RSNN_NN);
memcpy(CtReq->un.rsnn.wwnn, &vport->fc_nodename,
- sizeof (struct lpfc_name));
+ sizeof(struct lpfc_name));
size = sizeof(CtReq->un.rsnn.symbname);
CtReq->un.rsnn.len =
lpfc_vport_symbolic_node_name(vport,
@@ -1319,20 +1351,29 @@ ns_cmd_exit:
return 1;
}
+/**
+ * lpfc_cmpl_ct_disc_fdmi - Handle a discovery FDMI completion
+ * @phba: Pointer to HBA context object.
+ * @cmdiocb: Pointer to the command IOCBQ.
+ * @rspiocb: Pointer to the response IOCBQ.
+ *
+ * This function to handle the completion of a driver initiated FDMI
+ * CT command issued during discovery.
+ */
static void
-lpfc_cmpl_ct_cmd_fdmi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
- struct lpfc_iocbq * rspiocb)
+lpfc_cmpl_ct_disc_fdmi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
+ struct lpfc_iocbq *rspiocb)
{
+ struct lpfc_vport *vport = cmdiocb->vport;
struct lpfc_dmabuf *inp = cmdiocb->context1;
struct lpfc_dmabuf *outp = cmdiocb->context2;
- struct lpfc_sli_ct_request *CTrsp = outp->virt;
struct lpfc_sli_ct_request *CTcmd = inp->virt;
- struct lpfc_nodelist *ndlp;
+ struct lpfc_sli_ct_request *CTrsp = outp->virt;
uint16_t fdmi_cmd = CTcmd->CommandResponse.bits.CmdRsp;
uint16_t fdmi_rsp = CTrsp->CommandResponse.bits.CmdRsp;
- struct lpfc_vport *vport = cmdiocb->vport;
IOCB_t *irsp = &rspiocb->iocb;
- uint32_t latt;
+ struct lpfc_nodelist *ndlp;
+ uint32_t latt, cmd, err;
latt = lpfc_els_chk_latt(vport);
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_CT,
@@ -1340,91 +1381,1115 @@ lpfc_cmpl_ct_cmd_fdmi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
irsp->ulpStatus, irsp->un.ulpWord[4], latt);
if (latt || irsp->ulpStatus) {
+
+ /* Look for a retryable error */
+ if (irsp->ulpStatus == IOSTAT_LOCAL_REJECT) {
+ switch ((irsp->un.ulpWord[4] & IOERR_PARAM_MASK)) {
+ case IOERR_SLI_ABORTED:
+ case IOERR_ABORT_IN_PROGRESS:
+ case IOERR_SEQUENCE_TIMEOUT:
+ case IOERR_ILLEGAL_FRAME:
+ case IOERR_NO_RESOURCES:
+ case IOERR_ILLEGAL_COMMAND:
+ cmdiocb->retry++;
+ if (cmdiocb->retry >= LPFC_FDMI_MAX_RETRY)
+ break;
+
+ /* Retry the same FDMI command */
+ err = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING,
+ cmdiocb, 0);
+ if (err == IOCB_ERROR)
+ break;
+ return;
+ default:
+ break;
+ }
+ }
+
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"0229 FDMI cmd %04x failed, latt = %d "
"ulpStatus: x%x, rid x%x\n",
be16_to_cpu(fdmi_cmd), latt, irsp->ulpStatus,
irsp->un.ulpWord[4]);
- goto fail_out;
}
+ lpfc_ct_free_iocb(phba, cmdiocb);
ndlp = lpfc_findnode_did(vport, FDMI_DID);
if (!ndlp || !NLP_CHK_NODE_ACT(ndlp))
- goto fail_out;
+ return;
+ /* Check for a CT LS_RJT response */
+ cmd = be16_to_cpu(fdmi_cmd);
if (fdmi_rsp == cpu_to_be16(SLI_CT_RESPONSE_FS_RJT)) {
/* FDMI rsp failed */
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
- "0220 FDMI rsp failed Data: x%x\n",
- be16_to_cpu(fdmi_cmd));
+ "0220 FDMI cmd failed FS_RJT Data: x%x", cmd);
+
+ /* Should we fallback to FDMI-2 / FDMI-1 ? */
+ switch (cmd) {
+ case SLI_MGMT_RHBA:
+ if (vport->fdmi_hba_mask == LPFC_FDMI2_HBA_ATTR) {
+ /* Fallback to FDMI-1 */
+ vport->fdmi_hba_mask = LPFC_FDMI1_HBA_ATTR;
+ vport->fdmi_port_mask = LPFC_FDMI1_PORT_ATTR;
+ /* Start over */
+ lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_DHBA, 0);
+ }
+ return;
+
+ case SLI_MGMT_RPRT:
+ if (vport->fdmi_port_mask == LPFC_FDMI2_PORT_ATTR) {
+ /* Fallback to FDMI-1 */
+ vport->fdmi_port_mask = LPFC_FDMI1_PORT_ATTR;
+ /* Start over */
+ lpfc_fdmi_cmd(vport, ndlp, cmd, 0);
+ }
+ if (vport->fdmi_port_mask == LPFC_FDMI2_SMART_ATTR) {
+ vport->fdmi_port_mask = LPFC_FDMI2_PORT_ATTR;
+ /* Retry the same command */
+ lpfc_fdmi_cmd(vport, ndlp, cmd, 0);
+ }
+ return;
+
+ case SLI_MGMT_RPA:
+ if (vport->fdmi_port_mask == LPFC_FDMI2_PORT_ATTR) {
+ /* Fallback to FDMI-1 */
+ vport->fdmi_hba_mask = LPFC_FDMI1_HBA_ATTR;
+ vport->fdmi_port_mask = LPFC_FDMI1_PORT_ATTR;
+ /* Start over */
+ lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_DHBA, 0);
+ }
+ if (vport->fdmi_port_mask == LPFC_FDMI2_SMART_ATTR) {
+ vport->fdmi_port_mask = LPFC_FDMI2_PORT_ATTR;
+ /* Retry the same command */
+ lpfc_fdmi_cmd(vport, ndlp, cmd, 0);
+ }
+ return;
+ }
}
-fail_out:
- lpfc_ct_free_iocb(phba, cmdiocb);
+ /*
+ * On success, need to cycle thru FDMI registration for discovery
+ * DHBA -> DPRT -> RHBA -> RPA (physical port)
+ * DPRT -> RPRT (vports)
+ */
+ switch (cmd) {
+ case SLI_MGMT_RHBA:
+ lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_RPA, 0);
+ break;
+
+ case SLI_MGMT_DHBA:
+ lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_DPRT, 0);
+ break;
+
+ case SLI_MGMT_DPRT:
+ if (vport->port_type == LPFC_PHYSICAL_PORT)
+ lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_RHBA, 0);
+ else
+ lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_RPRT, 0);
+ break;
+ }
+ return;
}
-static void
-lpfc_cmpl_ct_disc_fdmi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
- struct lpfc_iocbq *rspiocb)
+
+/**
+ * lpfc_fdmi_num_disc_check - Check how many mapped NPorts we are connected to
+ * @vport: pointer to a host virtual N_Port data structure.
+ *
+ * Called from hbeat timeout routine to check if the number of discovered
+ * ports has changed. If so, re-register thar port Attribute.
+ */
+void
+lpfc_fdmi_num_disc_check(struct lpfc_vport *vport)
{
- struct lpfc_vport *vport = cmdiocb->vport;
- struct lpfc_dmabuf *inp = cmdiocb->context1;
- struct lpfc_sli_ct_request *CTcmd = inp->virt;
- uint16_t fdmi_cmd = CTcmd->CommandResponse.bits.CmdRsp;
+ struct lpfc_hba *phba = vport->phba;
struct lpfc_nodelist *ndlp;
+ uint16_t cnt;
+
+ if (!lpfc_is_link_up(phba))
+ return;
+
+ if (!(vport->fdmi_port_mask & LPFC_FDMI_PORT_ATTR_num_disc))
+ return;
- lpfc_cmpl_ct_cmd_fdmi(phba, cmdiocb, rspiocb);
+ cnt = lpfc_find_map_node(vport);
+ if (cnt == vport->fdmi_num_disc)
+ return;
ndlp = lpfc_findnode_did(vport, FDMI_DID);
if (!ndlp || !NLP_CHK_NODE_ACT(ndlp))
return;
- /*
- * Need to cycle thru FDMI registration for discovery
- * DHBA -> DPRT -> RHBA -> RPA
- */
- switch (be16_to_cpu(fdmi_cmd)) {
- case SLI_MGMT_RHBA:
- lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_RPA);
- break;
+ if (vport->port_type == LPFC_PHYSICAL_PORT) {
+ lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_RPA,
+ LPFC_FDMI_PORT_ATTR_num_disc);
+ } else {
+ lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_RPRT,
+ LPFC_FDMI_PORT_ATTR_num_disc);
+ }
+}
- case SLI_MGMT_DHBA:
- lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_DPRT);
- break;
+/* Routines for all individual HBA attributes */
+int
+lpfc_fdmi_hba_attr_wwnn(struct lpfc_vport *vport, struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t size;
- case SLI_MGMT_DPRT:
- lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_RHBA);
- break;
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+ memset(ae, 0, sizeof(struct lpfc_name));
+
+ memcpy(&ae->un.AttrWWN, &vport->fc_sparam.nodeName,
+ sizeof(struct lpfc_name));
+ size = FOURBYTES + sizeof(struct lpfc_name);
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RHBA_NODENAME);
+ return size;
+}
+int
+lpfc_fdmi_hba_attr_manufacturer(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t len, size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+ memset(ae, 0, 256);
+
+ strncpy(ae->un.AttrString,
+ "Emulex Corporation",
+ sizeof(ae->un.AttrString));
+ len = strnlen(ae->un.AttrString,
+ sizeof(ae->un.AttrString));
+ len += (len & 3) ? (4 - (len & 3)) : 4;
+ size = FOURBYTES + len;
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RHBA_MANUFACTURER);
+ return size;
+}
+
+int
+lpfc_fdmi_hba_attr_sn(struct lpfc_vport *vport, struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_hba *phba = vport->phba;
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t len, size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+ memset(ae, 0, 256);
+
+ strncpy(ae->un.AttrString, phba->SerialNumber,
+ sizeof(ae->un.AttrString));
+ len = strnlen(ae->un.AttrString,
+ sizeof(ae->un.AttrString));
+ len += (len & 3) ? (4 - (len & 3)) : 4;
+ size = FOURBYTES + len;
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RHBA_SERIAL_NUMBER);
+ return size;
+}
+
+int
+lpfc_fdmi_hba_attr_model(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_hba *phba = vport->phba;
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t len, size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+ memset(ae, 0, 256);
+
+ strncpy(ae->un.AttrString, phba->ModelName,
+ sizeof(ae->un.AttrString));
+ len = strnlen(ae->un.AttrString, sizeof(ae->un.AttrString));
+ len += (len & 3) ? (4 - (len & 3)) : 4;
+ size = FOURBYTES + len;
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RHBA_MODEL);
+ return size;
+}
+
+int
+lpfc_fdmi_hba_attr_description(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_hba *phba = vport->phba;
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t len, size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+ memset(ae, 0, 256);
+
+ strncpy(ae->un.AttrString, phba->ModelDesc,
+ sizeof(ae->un.AttrString));
+ len = strnlen(ae->un.AttrString,
+ sizeof(ae->un.AttrString));
+ len += (len & 3) ? (4 - (len & 3)) : 4;
+ size = FOURBYTES + len;
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RHBA_MODEL_DESCRIPTION);
+ return size;
+}
+
+int
+lpfc_fdmi_hba_attr_hdw_ver(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_hba *phba = vport->phba;
+ lpfc_vpd_t *vp = &phba->vpd;
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t i, j, incr, size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+ memset(ae, 0, 256);
+
+ /* Convert JEDEC ID to ascii for hardware version */
+ incr = vp->rev.biuRev;
+ for (i = 0; i < 8; i++) {
+ j = (incr & 0xf);
+ if (j <= 9)
+ ae->un.AttrString[7 - i] =
+ (char)((uint8_t) 0x30 +
+ (uint8_t) j);
+ else
+ ae->un.AttrString[7 - i] =
+ (char)((uint8_t) 0x61 +
+ (uint8_t) (j - 10));
+ incr = (incr >> 4);
}
+ size = FOURBYTES + 8;
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RHBA_HARDWARE_VERSION);
+ return size;
+}
+
+int
+lpfc_fdmi_hba_attr_drvr_ver(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t len, size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+ memset(ae, 0, 256);
+
+ strncpy(ae->un.AttrString, lpfc_release_version,
+ sizeof(ae->un.AttrString));
+ len = strnlen(ae->un.AttrString,
+ sizeof(ae->un.AttrString));
+ len += (len & 3) ? (4 - (len & 3)) : 4;
+ size = FOURBYTES + len;
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RHBA_DRIVER_VERSION);
+ return size;
+}
+
+int
+lpfc_fdmi_hba_attr_rom_ver(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_hba *phba = vport->phba;
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t len, size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+ memset(ae, 0, 256);
+
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ lpfc_decode_firmware_rev(phba, ae->un.AttrString, 1);
+ else
+ strncpy(ae->un.AttrString, phba->OptionROMVersion,
+ sizeof(ae->un.AttrString));
+ len = strnlen(ae->un.AttrString,
+ sizeof(ae->un.AttrString));
+ len += (len & 3) ? (4 - (len & 3)) : 4;
+ size = FOURBYTES + len;
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RHBA_OPTION_ROM_VERSION);
+ return size;
+}
+
+int
+lpfc_fdmi_hba_attr_fmw_ver(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_hba *phba = vport->phba;
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t len, size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+ memset(ae, 0, 256);
+
+ lpfc_decode_firmware_rev(phba, ae->un.AttrString, 1);
+ len = strnlen(ae->un.AttrString,
+ sizeof(ae->un.AttrString));
+ len += (len & 3) ? (4 - (len & 3)) : 4;
+ size = FOURBYTES + len;
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RHBA_FIRMWARE_VERSION);
+ return size;
+}
+
+int
+lpfc_fdmi_hba_attr_os_ver(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t len, size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+ memset(ae, 0, 256);
+
+ snprintf(ae->un.AttrString, sizeof(ae->un.AttrString), "%s %s %s",
+ init_utsname()->sysname,
+ init_utsname()->release,
+ init_utsname()->version);
+
+ len = strnlen(ae->un.AttrString, sizeof(ae->un.AttrString));
+ len += (len & 3) ? (4 - (len & 3)) : 4;
+ size = FOURBYTES + len;
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RHBA_OS_NAME_VERSION);
+ return size;
+}
+
+int
+lpfc_fdmi_hba_attr_ct_len(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+
+ ae->un.AttrInt = cpu_to_be32(LPFC_MAX_CT_SIZE);
+ size = FOURBYTES + sizeof(uint32_t);
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RHBA_MAX_CT_PAYLOAD_LEN);
+ return size;
+}
+
+int
+lpfc_fdmi_hba_attr_symbolic_name(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t len, size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+ memset(ae, 0, 256);
+
+ len = lpfc_vport_symbolic_node_name(vport,
+ ae->un.AttrString, 256);
+ len += (len & 3) ? (4 - (len & 3)) : 4;
+ size = FOURBYTES + len;
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RHBA_SYM_NODENAME);
+ return size;
+}
+
+int
+lpfc_fdmi_hba_attr_vendor_info(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+
+ /* Nothing is defined for this currently */
+ ae->un.AttrInt = cpu_to_be32(0);
+ size = FOURBYTES + sizeof(uint32_t);
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RHBA_VENDOR_INFO);
+ return size;
}
+int
+lpfc_fdmi_hba_attr_num_ports(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+
+ /* Each driver instance corresponds to a single port */
+ ae->un.AttrInt = cpu_to_be32(1);
+ size = FOURBYTES + sizeof(uint32_t);
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RHBA_NUM_PORTS);
+ return size;
+}
+
+int
+lpfc_fdmi_hba_attr_fabric_wwnn(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+ memset(ae, 0, sizeof(struct lpfc_name));
+
+ memcpy(&ae->un.AttrWWN, &vport->fabric_nodename,
+ sizeof(struct lpfc_name));
+ size = FOURBYTES + sizeof(struct lpfc_name);
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RHBA_FABRIC_WWNN);
+ return size;
+}
int
-lpfc_fdmi_cmd(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, int cmdcode)
+lpfc_fdmi_hba_attr_bios_ver(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_hba *phba = vport->phba;
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t len, size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+ memset(ae, 0, 256);
+
+ lpfc_decode_firmware_rev(phba, ae->un.AttrString, 1);
+ len = strnlen(ae->un.AttrString,
+ sizeof(ae->un.AttrString));
+ len += (len & 3) ? (4 - (len & 3)) : 4;
+ size = FOURBYTES + len;
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RHBA_BIOS_VERSION);
+ return size;
+}
+
+int
+lpfc_fdmi_hba_attr_bios_state(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+
+ /* Driver doesn't have access to this information */
+ ae->un.AttrInt = cpu_to_be32(0);
+ size = FOURBYTES + sizeof(uint32_t);
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RHBA_BIOS_STATE);
+ return size;
+}
+
+int
+lpfc_fdmi_hba_attr_vendor_id(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t len, size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+ memset(ae, 0, 256);
+
+ strncpy(ae->un.AttrString, "EMULEX",
+ sizeof(ae->un.AttrString));
+ len = strnlen(ae->un.AttrString,
+ sizeof(ae->un.AttrString));
+ len += (len & 3) ? (4 - (len & 3)) : 4;
+ size = FOURBYTES + len;
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RHBA_VENDOR_ID);
+ return size;
+}
+
+/* Routines for all individual PORT attributes */
+int
+lpfc_fdmi_port_attr_fc4type(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+ memset(ae, 0, 32);
+
+ ae->un.AttrTypes[3] = 0x02; /* Type 1 - ELS */
+ ae->un.AttrTypes[2] = 0x01; /* Type 8 - FCP */
+ ae->un.AttrTypes[7] = 0x01; /* Type 32 - CT */
+ size = FOURBYTES + 32;
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RPRT_SUPPORTED_FC4_TYPES);
+ return size;
+}
+
+int
+lpfc_fdmi_port_attr_support_speed(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_hba *phba = vport->phba;
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+
+ ae->un.AttrInt = 0;
+ if (!(phba->hba_flag & HBA_FCOE_MODE)) {
+ if (phba->lmt & LMT_32Gb)
+ ae->un.AttrInt |= HBA_PORTSPEED_32GFC;
+ if (phba->lmt & LMT_16Gb)
+ ae->un.AttrInt |= HBA_PORTSPEED_16GFC;
+ if (phba->lmt & LMT_10Gb)
+ ae->un.AttrInt |= HBA_PORTSPEED_10GFC;
+ if (phba->lmt & LMT_8Gb)
+ ae->un.AttrInt |= HBA_PORTSPEED_8GFC;
+ if (phba->lmt & LMT_4Gb)
+ ae->un.AttrInt |= HBA_PORTSPEED_4GFC;
+ if (phba->lmt & LMT_2Gb)
+ ae->un.AttrInt |= HBA_PORTSPEED_2GFC;
+ if (phba->lmt & LMT_1Gb)
+ ae->un.AttrInt |= HBA_PORTSPEED_1GFC;
+ } else {
+ /* FCoE links support only one speed */
+ switch (phba->fc_linkspeed) {
+ case LPFC_ASYNC_LINK_SPEED_10GBPS:
+ ae->un.AttrInt = HBA_PORTSPEED_10GE;
+ break;
+ case LPFC_ASYNC_LINK_SPEED_25GBPS:
+ ae->un.AttrInt = HBA_PORTSPEED_25GE;
+ break;
+ case LPFC_ASYNC_LINK_SPEED_40GBPS:
+ ae->un.AttrInt = HBA_PORTSPEED_40GE;
+ break;
+ case LPFC_ASYNC_LINK_SPEED_100GBPS:
+ ae->un.AttrInt = HBA_PORTSPEED_100GE;
+ break;
+ }
+ }
+ ae->un.AttrInt = cpu_to_be32(ae->un.AttrInt);
+ size = FOURBYTES + sizeof(uint32_t);
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RPRT_SUPPORTED_SPEED);
+ return size;
+}
+
+int
+lpfc_fdmi_port_attr_speed(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_hba *phba = vport->phba;
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+
+ if (!(phba->hba_flag & HBA_FCOE_MODE)) {
+ switch (phba->fc_linkspeed) {
+ case LPFC_LINK_SPEED_1GHZ:
+ ae->un.AttrInt = HBA_PORTSPEED_1GFC;
+ break;
+ case LPFC_LINK_SPEED_2GHZ:
+ ae->un.AttrInt = HBA_PORTSPEED_2GFC;
+ break;
+ case LPFC_LINK_SPEED_4GHZ:
+ ae->un.AttrInt = HBA_PORTSPEED_4GFC;
+ break;
+ case LPFC_LINK_SPEED_8GHZ:
+ ae->un.AttrInt = HBA_PORTSPEED_8GFC;
+ break;
+ case LPFC_LINK_SPEED_10GHZ:
+ ae->un.AttrInt = HBA_PORTSPEED_10GFC;
+ break;
+ case LPFC_LINK_SPEED_16GHZ:
+ ae->un.AttrInt = HBA_PORTSPEED_16GFC;
+ break;
+ case LPFC_LINK_SPEED_32GHZ:
+ ae->un.AttrInt = HBA_PORTSPEED_32GFC;
+ break;
+ default:
+ ae->un.AttrInt = HBA_PORTSPEED_UNKNOWN;
+ break;
+ }
+ } else {
+ switch (phba->fc_linkspeed) {
+ case LPFC_ASYNC_LINK_SPEED_10GBPS:
+ ae->un.AttrInt = HBA_PORTSPEED_10GE;
+ break;
+ case LPFC_ASYNC_LINK_SPEED_25GBPS:
+ ae->un.AttrInt = HBA_PORTSPEED_25GE;
+ break;
+ case LPFC_ASYNC_LINK_SPEED_40GBPS:
+ ae->un.AttrInt = HBA_PORTSPEED_40GE;
+ break;
+ case LPFC_ASYNC_LINK_SPEED_100GBPS:
+ ae->un.AttrInt = HBA_PORTSPEED_100GE;
+ break;
+ default:
+ ae->un.AttrInt = HBA_PORTSPEED_UNKNOWN;
+ break;
+ }
+ }
+
+ ae->un.AttrInt = cpu_to_be32(ae->un.AttrInt);
+ size = FOURBYTES + sizeof(uint32_t);
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RPRT_PORT_SPEED);
+ return size;
+}
+
+int
+lpfc_fdmi_port_attr_max_frame(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct serv_parm *hsp;
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+
+ hsp = (struct serv_parm *)&vport->fc_sparam;
+ ae->un.AttrInt = (((uint32_t) hsp->cmn.bbRcvSizeMsb) << 8) |
+ (uint32_t) hsp->cmn.bbRcvSizeLsb;
+ ae->un.AttrInt = cpu_to_be32(ae->un.AttrInt);
+ size = FOURBYTES + sizeof(uint32_t);
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RPRT_MAX_FRAME_SIZE);
+ return size;
+}
+
+int
+lpfc_fdmi_port_attr_os_devname(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t len, size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+ memset(ae, 0, 256);
+
+ snprintf(ae->un.AttrString, sizeof(ae->un.AttrString),
+ "/sys/class/scsi_host/host%d", shost->host_no);
+ len = strnlen((char *)ae->un.AttrString,
+ sizeof(ae->un.AttrString));
+ len += (len & 3) ? (4 - (len & 3)) : 4;
+ size = FOURBYTES + len;
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RPRT_OS_DEVICE_NAME);
+ return size;
+}
+
+int
+lpfc_fdmi_port_attr_host_name(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t len, size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+ memset(ae, 0, 256);
+
+ snprintf(ae->un.AttrString, sizeof(ae->un.AttrString), "%s",
+ init_utsname()->nodename);
+
+ len = strnlen(ae->un.AttrString, sizeof(ae->un.AttrString));
+ len += (len & 3) ? (4 - (len & 3)) : 4;
+ size = FOURBYTES + len;
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RPRT_HOST_NAME);
+ return size;
+}
+
+int
+lpfc_fdmi_port_attr_wwnn(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+ memset(ae, 0, sizeof(struct lpfc_name));
+
+ memcpy(&ae->un.AttrWWN, &vport->fc_sparam.nodeName,
+ sizeof(struct lpfc_name));
+ size = FOURBYTES + sizeof(struct lpfc_name);
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RPRT_NODENAME);
+ return size;
+}
+
+int
+lpfc_fdmi_port_attr_wwpn(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+ memset(ae, 0, sizeof(struct lpfc_name));
+
+ memcpy(&ae->un.AttrWWN, &vport->fc_sparam.portName,
+ sizeof(struct lpfc_name));
+ size = FOURBYTES + sizeof(struct lpfc_name);
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RPRT_PORTNAME);
+ return size;
+}
+
+int
+lpfc_fdmi_port_attr_symbolic_name(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t len, size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+ memset(ae, 0, 256);
+
+ len = lpfc_vport_symbolic_port_name(vport, ae->un.AttrString, 256);
+ len += (len & 3) ? (4 - (len & 3)) : 4;
+ size = FOURBYTES + len;
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RPRT_SYM_PORTNAME);
+ return size;
+}
+
+int
+lpfc_fdmi_port_attr_port_type(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_hba *phba = vport->phba;
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+ if (phba->fc_topology == LPFC_TOPOLOGY_LOOP)
+ ae->un.AttrInt = cpu_to_be32(LPFC_FDMI_PORTTYPE_NLPORT);
+ else
+ ae->un.AttrInt = cpu_to_be32(LPFC_FDMI_PORTTYPE_NPORT);
+ size = FOURBYTES + sizeof(uint32_t);
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RPRT_PORT_TYPE);
+ return size;
+}
+
+int
+lpfc_fdmi_port_attr_class(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+ ae->un.AttrInt = cpu_to_be32(FC_COS_CLASS2 | FC_COS_CLASS3);
+ size = FOURBYTES + sizeof(uint32_t);
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RPRT_SUPPORTED_CLASS);
+ return size;
+}
+
+int
+lpfc_fdmi_port_attr_fabric_wwpn(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+ memset(ae, 0, sizeof(struct lpfc_name));
+
+ memcpy(&ae->un.AttrWWN, &vport->fabric_portname,
+ sizeof(struct lpfc_name));
+ size = FOURBYTES + sizeof(struct lpfc_name);
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RPRT_FABRICNAME);
+ return size;
+}
+
+int
+lpfc_fdmi_port_attr_active_fc4type(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+ memset(ae, 0, 32);
+
+ ae->un.AttrTypes[3] = 0x02; /* Type 1 - ELS */
+ ae->un.AttrTypes[2] = 0x01; /* Type 8 - FCP */
+ ae->un.AttrTypes[7] = 0x01; /* Type 32 - CT */
+ size = FOURBYTES + 32;
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RPRT_ACTIVE_FC4_TYPES);
+ return size;
+}
+
+int
+lpfc_fdmi_port_attr_port_state(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+ /* Link Up - operational */
+ ae->un.AttrInt = cpu_to_be32(LPFC_FDMI_PORTSTATE_ONLINE);
+ size = FOURBYTES + sizeof(uint32_t);
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RPRT_PORT_STATE);
+ return size;
+}
+
+int
+lpfc_fdmi_port_attr_num_disc(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+ vport->fdmi_num_disc = lpfc_find_map_node(vport);
+ ae->un.AttrInt = cpu_to_be32(vport->fdmi_num_disc);
+ size = FOURBYTES + sizeof(uint32_t);
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RPRT_DISC_PORT);
+ return size;
+}
+
+int
+lpfc_fdmi_port_attr_nportid(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+ ae->un.AttrInt = cpu_to_be32(vport->fc_myDID);
+ size = FOURBYTES + sizeof(uint32_t);
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RPRT_PORT_ID);
+ return size;
+}
+
+int
+lpfc_fdmi_smart_attr_service(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t len, size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+ memset(ae, 0, 256);
+
+ strncpy(ae->un.AttrString, "Smart SAN Initiator",
+ sizeof(ae->un.AttrString));
+ len = strnlen(ae->un.AttrString,
+ sizeof(ae->un.AttrString));
+ len += (len & 3) ? (4 - (len & 3)) : 4;
+ size = FOURBYTES + len;
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RPRT_SMART_SERVICE);
+ return size;
+}
+
+int
+lpfc_fdmi_smart_attr_guid(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+ memset(ae, 0, 256);
+
+ memcpy(&ae->un.AttrString, &vport->fc_sparam.nodeName,
+ sizeof(struct lpfc_name));
+ memcpy((((uint8_t *)&ae->un.AttrString) +
+ sizeof(struct lpfc_name)),
+ &vport->fc_sparam.portName, sizeof(struct lpfc_name));
+ size = FOURBYTES + (2 * sizeof(struct lpfc_name));
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RPRT_SMART_GUID);
+ return size;
+}
+
+int
+lpfc_fdmi_smart_attr_version(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t len, size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+ memset(ae, 0, 256);
+
+ strncpy(ae->un.AttrString, "Smart SAN Version 1.0",
+ sizeof(ae->un.AttrString));
+ len = strnlen(ae->un.AttrString,
+ sizeof(ae->un.AttrString));
+ len += (len & 3) ? (4 - (len & 3)) : 4;
+ size = FOURBYTES + len;
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RPRT_SMART_VERSION);
+ return size;
+}
+
+int
+lpfc_fdmi_smart_attr_model(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_hba *phba = vport->phba;
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t len, size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+ memset(ae, 0, 256);
+
+ strncpy(ae->un.AttrString, phba->ModelName,
+ sizeof(ae->un.AttrString));
+ len = strnlen(ae->un.AttrString, sizeof(ae->un.AttrString));
+ len += (len & 3) ? (4 - (len & 3)) : 4;
+ size = FOURBYTES + len;
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RPRT_SMART_MODEL);
+ return size;
+}
+
+int
+lpfc_fdmi_smart_attr_port_info(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+
+ /* SRIOV (type 3) is not supported */
+ if (vport->vpi)
+ ae->un.AttrInt = cpu_to_be32(2); /* NPIV */
+ else
+ ae->un.AttrInt = cpu_to_be32(1); /* Physical */
+ size = FOURBYTES + sizeof(uint32_t);
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RPRT_SMART_PORT_INFO);
+ return size;
+}
+
+int
+lpfc_fdmi_smart_attr_qos(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+ ae->un.AttrInt = cpu_to_be32(0);
+ size = FOURBYTES + sizeof(uint32_t);
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RPRT_SMART_QOS);
+ return size;
+}
+
+int
+lpfc_fdmi_smart_attr_security(struct lpfc_vport *vport,
+ struct lpfc_fdmi_attr_def *ad)
+{
+ struct lpfc_fdmi_attr_entry *ae;
+ uint32_t size;
+
+ ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+ ae->un.AttrInt = cpu_to_be32(0);
+ size = FOURBYTES + sizeof(uint32_t);
+ ad->AttrLen = cpu_to_be16(size);
+ ad->AttrType = cpu_to_be16(RPRT_SMART_SECURITY);
+ return size;
+}
+
+/* RHBA attribute jump table */
+int (*lpfc_fdmi_hba_action[])
+ (struct lpfc_vport *vport, struct lpfc_fdmi_attr_def *ad) = {
+ /* Action routine Mask bit Attribute type */
+ lpfc_fdmi_hba_attr_wwnn, /* bit0 RHBA_NODENAME */
+ lpfc_fdmi_hba_attr_manufacturer, /* bit1 RHBA_MANUFACTURER */
+ lpfc_fdmi_hba_attr_sn, /* bit2 RHBA_SERIAL_NUMBER */
+ lpfc_fdmi_hba_attr_model, /* bit3 RHBA_MODEL */
+ lpfc_fdmi_hba_attr_description, /* bit4 RHBA_MODEL_DESCRIPTION */
+ lpfc_fdmi_hba_attr_hdw_ver, /* bit5 RHBA_HARDWARE_VERSION */
+ lpfc_fdmi_hba_attr_drvr_ver, /* bit6 RHBA_DRIVER_VERSION */
+ lpfc_fdmi_hba_attr_rom_ver, /* bit7 RHBA_OPTION_ROM_VERSION */
+ lpfc_fdmi_hba_attr_fmw_ver, /* bit8 RHBA_FIRMWARE_VERSION */
+ lpfc_fdmi_hba_attr_os_ver, /* bit9 RHBA_OS_NAME_VERSION */
+ lpfc_fdmi_hba_attr_ct_len, /* bit10 RHBA_MAX_CT_PAYLOAD_LEN */
+ lpfc_fdmi_hba_attr_symbolic_name, /* bit11 RHBA_SYM_NODENAME */
+ lpfc_fdmi_hba_attr_vendor_info, /* bit12 RHBA_VENDOR_INFO */
+ lpfc_fdmi_hba_attr_num_ports, /* bit13 RHBA_NUM_PORTS */
+ lpfc_fdmi_hba_attr_fabric_wwnn, /* bit14 RHBA_FABRIC_WWNN */
+ lpfc_fdmi_hba_attr_bios_ver, /* bit15 RHBA_BIOS_VERSION */
+ lpfc_fdmi_hba_attr_bios_state, /* bit16 RHBA_BIOS_STATE */
+ lpfc_fdmi_hba_attr_vendor_id, /* bit17 RHBA_VENDOR_ID */
+};
+
+/* RPA / RPRT attribute jump table */
+int (*lpfc_fdmi_port_action[])
+ (struct lpfc_vport *vport, struct lpfc_fdmi_attr_def *ad) = {
+ /* Action routine Mask bit Attribute type */
+ lpfc_fdmi_port_attr_fc4type, /* bit0 RPRT_SUPPORT_FC4_TYPES */
+ lpfc_fdmi_port_attr_support_speed, /* bit1 RPRT_SUPPORTED_SPEED */
+ lpfc_fdmi_port_attr_speed, /* bit2 RPRT_PORT_SPEED */
+ lpfc_fdmi_port_attr_max_frame, /* bit3 RPRT_MAX_FRAME_SIZE */
+ lpfc_fdmi_port_attr_os_devname, /* bit4 RPRT_OS_DEVICE_NAME */
+ lpfc_fdmi_port_attr_host_name, /* bit5 RPRT_HOST_NAME */
+ lpfc_fdmi_port_attr_wwnn, /* bit6 RPRT_NODENAME */
+ lpfc_fdmi_port_attr_wwpn, /* bit7 RPRT_PORTNAME */
+ lpfc_fdmi_port_attr_symbolic_name, /* bit8 RPRT_SYM_PORTNAME */
+ lpfc_fdmi_port_attr_port_type, /* bit9 RPRT_PORT_TYPE */
+ lpfc_fdmi_port_attr_class, /* bit10 RPRT_SUPPORTED_CLASS */
+ lpfc_fdmi_port_attr_fabric_wwpn, /* bit11 RPRT_FABRICNAME */
+ lpfc_fdmi_port_attr_active_fc4type, /* bit12 RPRT_ACTIVE_FC4_TYPES */
+ lpfc_fdmi_port_attr_port_state, /* bit13 RPRT_PORT_STATE */
+ lpfc_fdmi_port_attr_num_disc, /* bit14 RPRT_DISC_PORT */
+ lpfc_fdmi_port_attr_nportid, /* bit15 RPRT_PORT_ID */
+ lpfc_fdmi_smart_attr_service, /* bit16 RPRT_SMART_SERVICE */
+ lpfc_fdmi_smart_attr_guid, /* bit17 RPRT_SMART_GUID */
+ lpfc_fdmi_smart_attr_version, /* bit18 RPRT_SMART_VERSION */
+ lpfc_fdmi_smart_attr_model, /* bit19 RPRT_SMART_MODEL */
+ lpfc_fdmi_smart_attr_port_info, /* bit20 RPRT_SMART_PORT_INFO */
+ lpfc_fdmi_smart_attr_qos, /* bit21 RPRT_SMART_QOS */
+ lpfc_fdmi_smart_attr_security, /* bit22 RPRT_SMART_SECURITY */
+};
+
+/**
+ * lpfc_fdmi_cmd - Build and send a FDMI cmd to the specified NPort
+ * @vport: pointer to a host virtual N_Port data structure.
+ * @ndlp: ndlp to send FDMI cmd to (if NULL use FDMI_DID)
+ * cmdcode: FDMI command to send
+ * mask: Mask of HBA or PORT Attributes to send
+ *
+ * Builds and sends a FDMI command using the CT subsystem.
+ */
+int
+lpfc_fdmi_cmd(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
+ int cmdcode, uint32_t new_mask)
{
struct lpfc_hba *phba = vport->phba;
struct lpfc_dmabuf *mp, *bmp;
struct lpfc_sli_ct_request *CtReq;
struct ulp_bde64 *bpl;
+ uint32_t bit_pos;
uint32_t size;
uint32_t rsp_size;
+ uint32_t mask;
struct lpfc_fdmi_reg_hba *rh;
struct lpfc_fdmi_port_entry *pe;
struct lpfc_fdmi_reg_portattr *pab = NULL;
struct lpfc_fdmi_attr_block *ab = NULL;
- struct lpfc_fdmi_attr_entry *ae;
- struct lpfc_fdmi_attr_def *ad;
- void (*cmpl) (struct lpfc_hba *, struct lpfc_iocbq *,
- struct lpfc_iocbq *);
+ int (*func)(struct lpfc_vport *vport, struct lpfc_fdmi_attr_def *ad);
+ void (*cmpl)(struct lpfc_hba *, struct lpfc_iocbq *,
+ struct lpfc_iocbq *);
- if (ndlp == NULL) {
- ndlp = lpfc_findnode_did(vport, FDMI_DID);
- if (!ndlp || !NLP_CHK_NODE_ACT(ndlp))
- return 0;
- cmpl = lpfc_cmpl_ct_cmd_fdmi; /* cmd interface */
- } else {
- cmpl = lpfc_cmpl_ct_disc_fdmi; /* called from discovery */
- }
+ if (!ndlp || !NLP_CHK_NODE_ACT(ndlp))
+ return 0;
+
+ cmpl = lpfc_cmpl_ct_disc_fdmi; /* called from discovery */
/* fill in BDEs for command */
/* Allocate buffer for command payload */
@@ -1470,573 +2535,99 @@ lpfc_fdmi_cmd(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, int cmdcode)
switch (cmdcode) {
case SLI_MGMT_RHAT:
case SLI_MGMT_RHBA:
- {
- lpfc_vpd_t *vp = &phba->vpd;
- uint32_t i, j, incr;
- int len = 0;
+ rh = (struct lpfc_fdmi_reg_hba *)&CtReq->un.PortID;
+ /* HBA Identifier */
+ memcpy(&rh->hi.PortName, &phba->pport->fc_sparam.portName,
+ sizeof(struct lpfc_name));
- rh = (struct lpfc_fdmi_reg_hba *)&CtReq->un.PortID;
- /* HBA Identifier */
- memcpy(&rh->hi.PortName, &vport->fc_sparam.portName,
+ if (cmdcode == SLI_MGMT_RHBA) {
+ /* Registered Port List */
+ /* One entry (port) per adapter */
+ rh->rpl.EntryCnt = cpu_to_be32(1);
+ memcpy(&rh->rpl.pe, &phba->pport->fc_sparam.portName,
sizeof(struct lpfc_name));
- if (cmdcode == SLI_MGMT_RHBA) {
- /* Registered Port List */
- /* One entry (port) per adapter */
- rh->rpl.EntryCnt = cpu_to_be32(1);
- memcpy(&rh->rpl.pe, &vport->fc_sparam.portName,
- sizeof(struct lpfc_name));
-
- /* point to the HBA attribute block */
- size = 2 * sizeof(struct lpfc_name) +
- FOURBYTES;
- } else {
- size = sizeof(struct lpfc_name);
- }
- ab = (struct lpfc_fdmi_attr_block *)
- ((uint8_t *)rh + size);
- ab->EntryCnt = 0;
- size += FOURBYTES;
-
- /*
- * Point to beginning of first HBA attribute entry
- */
- /* #1 HBA attribute entry */
- ad = (struct lpfc_fdmi_attr_def *)
- ((uint8_t *)rh + size);
- ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
- memset(ae, 0, sizeof(struct lpfc_name));
- ad->AttrType = cpu_to_be16(RHBA_NODENAME);
- ad->AttrLen = cpu_to_be16(FOURBYTES
- + sizeof(struct lpfc_name));
- memcpy(&ae->un.NodeName, &vport->fc_sparam.nodeName,
- sizeof(struct lpfc_name));
- ab->EntryCnt++;
- size += FOURBYTES + sizeof(struct lpfc_name);
- if ((size + LPFC_FDMI_MAX_AE_SIZE) >
- (LPFC_BPL_SIZE - LPFC_CT_PREAMBLE))
- goto hba_out;
-
- /* #2 HBA attribute entry */
- ad = (struct lpfc_fdmi_attr_def *)
- ((uint8_t *)rh + size);
- ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
- memset(ae, 0, sizeof(ae->un.Manufacturer));
- ad->AttrType = cpu_to_be16(RHBA_MANUFACTURER);
- strncpy(ae->un.Manufacturer, "Emulex Corporation",
- sizeof(ae->un.Manufacturer));
- len = strnlen(ae->un.Manufacturer,
- sizeof(ae->un.Manufacturer));
- len += (len & 3) ? (4 - (len & 3)) : 4;
- ad->AttrLen = cpu_to_be16(FOURBYTES + len);
- ab->EntryCnt++;
- size += FOURBYTES + len;
- if ((size + LPFC_FDMI_MAX_AE_SIZE) >
- (LPFC_BPL_SIZE - LPFC_CT_PREAMBLE))
- goto hba_out;
-
- /* #3 HBA attribute entry */
- ad = (struct lpfc_fdmi_attr_def *)
- ((uint8_t *)rh + size);
- ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
- memset(ae, 0, sizeof(ae->un.SerialNumber));
- ad->AttrType = cpu_to_be16(RHBA_SERIAL_NUMBER);
- strncpy(ae->un.SerialNumber, phba->SerialNumber,
- sizeof(ae->un.SerialNumber));
- len = strnlen(ae->un.SerialNumber,
- sizeof(ae->un.SerialNumber));
- len += (len & 3) ? (4 - (len & 3)) : 4;
- ad->AttrLen = cpu_to_be16(FOURBYTES + len);
- ab->EntryCnt++;
- size += FOURBYTES + len;
- if ((size + LPFC_FDMI_MAX_AE_SIZE) >
- (LPFC_BPL_SIZE - LPFC_CT_PREAMBLE))
- goto hba_out;
-
- /* #4 HBA attribute entry */
- ad = (struct lpfc_fdmi_attr_def *)
- ((uint8_t *)rh + size);
- ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
- memset(ae, 0, sizeof(ae->un.Model));
- ad->AttrType = cpu_to_be16(RHBA_MODEL);
- strncpy(ae->un.Model, phba->ModelName,
- sizeof(ae->un.Model));
- len = strnlen(ae->un.Model, sizeof(ae->un.Model));
- len += (len & 3) ? (4 - (len & 3)) : 4;
- ad->AttrLen = cpu_to_be16(FOURBYTES + len);
- ab->EntryCnt++;
- size += FOURBYTES + len;
- if ((size + LPFC_FDMI_MAX_AE_SIZE) >
- (LPFC_BPL_SIZE - LPFC_CT_PREAMBLE))
- goto hba_out;
-
- /* #5 HBA attribute entry */
- ad = (struct lpfc_fdmi_attr_def *)
- ((uint8_t *)rh + size);
- ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
- memset(ae, 0, sizeof(ae->un.ModelDescription));
- ad->AttrType = cpu_to_be16(RHBA_MODEL_DESCRIPTION);
- strncpy(ae->un.ModelDescription, phba->ModelDesc,
- sizeof(ae->un.ModelDescription));
- len = strnlen(ae->un.ModelDescription,
- sizeof(ae->un.ModelDescription));
- len += (len & 3) ? (4 - (len & 3)) : 4;
- ad->AttrLen = cpu_to_be16(FOURBYTES + len);
- ab->EntryCnt++;
- size += FOURBYTES + len;
- if ((size + 8) > (LPFC_BPL_SIZE - LPFC_CT_PREAMBLE))
- goto hba_out;
-
- /* #6 HBA attribute entry */
- ad = (struct lpfc_fdmi_attr_def *)
- ((uint8_t *)rh + size);
- ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
- memset(ae, 0, 8);
- ad->AttrType = cpu_to_be16(RHBA_HARDWARE_VERSION);
- ad->AttrLen = cpu_to_be16(FOURBYTES + 8);
- /* Convert JEDEC ID to ascii for hardware version */
- incr = vp->rev.biuRev;
- for (i = 0; i < 8; i++) {
- j = (incr & 0xf);
- if (j <= 9)
- ae->un.HardwareVersion[7 - i] =
- (char)((uint8_t)0x30 +
- (uint8_t)j);
- else
- ae->un.HardwareVersion[7 - i] =
- (char)((uint8_t)0x61 +
- (uint8_t)(j - 10));
- incr = (incr >> 4);
+ /* point to the HBA attribute block */
+ size = 2 * sizeof(struct lpfc_name) +
+ FOURBYTES;
+ } else {
+ size = sizeof(struct lpfc_name);
+ }
+ ab = (struct lpfc_fdmi_attr_block *)((uint8_t *)rh + size);
+ ab->EntryCnt = 0;
+ size += FOURBYTES;
+ bit_pos = 0;
+ if (new_mask)
+ mask = new_mask;
+ else
+ mask = vport->fdmi_hba_mask;
+
+ /* Mask will dictate what attributes to build in the request */
+ while (mask) {
+ if (mask & 0x1) {
+ func = lpfc_fdmi_hba_action[bit_pos];
+ size += func(vport,
+ (struct lpfc_fdmi_attr_def *)
+ ((uint8_t *)rh + size));
+ ab->EntryCnt++;
+ if ((size + 256) >
+ (LPFC_BPL_SIZE - LPFC_CT_PREAMBLE))
+ goto hba_out;
}
- ab->EntryCnt++;
- size += FOURBYTES + 8;
- if ((size + LPFC_FDMI_MAX_AE_SIZE) >
- (LPFC_BPL_SIZE - LPFC_CT_PREAMBLE))
- goto hba_out;
-
- /* #7 HBA attribute entry */
- ad = (struct lpfc_fdmi_attr_def *)
- ((uint8_t *)rh + size);
- ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
- memset(ae, 0, sizeof(ae->un.DriverVersion));
- ad->AttrType = cpu_to_be16(RHBA_DRIVER_VERSION);
- strncpy(ae->un.DriverVersion, lpfc_release_version,
- sizeof(ae->un.DriverVersion));
- len = strnlen(ae->un.DriverVersion,
- sizeof(ae->un.DriverVersion));
- len += (len & 3) ? (4 - (len & 3)) : 4;
- ad->AttrLen = cpu_to_be16(FOURBYTES + len);
- ab->EntryCnt++;
- size += FOURBYTES + len;
- if ((size + LPFC_FDMI_MAX_AE_SIZE) >
- (LPFC_BPL_SIZE - LPFC_CT_PREAMBLE))
- goto hba_out;
-
- /* #8 HBA attribute entry */
- ad = (struct lpfc_fdmi_attr_def *)
- ((uint8_t *)rh + size);
- ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
- memset(ae, 0, sizeof(ae->un.OptionROMVersion));
- ad->AttrType = cpu_to_be16(RHBA_OPTION_ROM_VERSION);
- strncpy(ae->un.OptionROMVersion, phba->OptionROMVersion,
- sizeof(ae->un.OptionROMVersion));
- len = strnlen(ae->un.OptionROMVersion,
- sizeof(ae->un.OptionROMVersion));
- len += (len & 3) ? (4 - (len & 3)) : 4;
- ad->AttrLen = cpu_to_be16(FOURBYTES + len);
- ab->EntryCnt++;
- size += FOURBYTES + len;
- if ((size + LPFC_FDMI_MAX_AE_SIZE) >
- (LPFC_BPL_SIZE - LPFC_CT_PREAMBLE))
- goto hba_out;
-
- /* #9 HBA attribute entry */
- ad = (struct lpfc_fdmi_attr_def *)
- ((uint8_t *)rh + size);
- ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
- memset(ae, 0, sizeof(ae->un.FirmwareVersion));
- ad->AttrType = cpu_to_be16(RHBA_FIRMWARE_VERSION);
- lpfc_decode_firmware_rev(phba, ae->un.FirmwareVersion,
- 1);
- len = strnlen(ae->un.FirmwareVersion,
- sizeof(ae->un.FirmwareVersion));
- len += (len & 3) ? (4 - (len & 3)) : 4;
- ad->AttrLen = cpu_to_be16(FOURBYTES + len);
- ab->EntryCnt++;
- size += FOURBYTES + len;
- if ((size + LPFC_FDMI_MAX_AE_SIZE) >
- (LPFC_BPL_SIZE - LPFC_CT_PREAMBLE))
- goto hba_out;
-
- /* #10 HBA attribute entry */
- ad = (struct lpfc_fdmi_attr_def *)
- ((uint8_t *)rh + size);
- ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
- memset(ae, 0, sizeof(ae->un.OsNameVersion));
- ad->AttrType = cpu_to_be16(RHBA_OS_NAME_VERSION);
- snprintf(ae->un.OsNameVersion,
- sizeof(ae->un.OsNameVersion),
- "%s %s %s",
- init_utsname()->sysname,
- init_utsname()->release,
- init_utsname()->version);
- len = strnlen(ae->un.OsNameVersion,
- sizeof(ae->un.OsNameVersion));
- len += (len & 3) ? (4 - (len & 3)) : 4;
- ad->AttrLen = cpu_to_be16(FOURBYTES + len);
- ab->EntryCnt++;
- size += FOURBYTES + len;
- if ((size + 4) > (LPFC_BPL_SIZE - LPFC_CT_PREAMBLE))
- goto hba_out;
-
- /* #11 HBA attribute entry */
- ad = (struct lpfc_fdmi_attr_def *)
- ((uint8_t *)rh + size);
- ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
- ad->AttrType =
- cpu_to_be16(RHBA_MAX_CT_PAYLOAD_LEN);
- ad->AttrLen = cpu_to_be16(FOURBYTES + 4);
- ae->un.MaxCTPayloadLen = cpu_to_be32(LPFC_MAX_CT_SIZE);
- ab->EntryCnt++;
- size += FOURBYTES + 4;
- if ((size + LPFC_FDMI_MAX_AE_SIZE) >
- (LPFC_BPL_SIZE - LPFC_CT_PREAMBLE))
- goto hba_out;
-
- /*
- * Currently switches don't seem to support the
- * following extended HBA attributes.
- */
- if (!(vport->cfg_fdmi_on & LPFC_FDMI_ALL_ATTRIB))
- goto hba_out;
-
- /* #12 HBA attribute entry */
- ad = (struct lpfc_fdmi_attr_def *)
- ((uint8_t *)rh + size);
- ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
- memset(ae, 0, sizeof(ae->un.NodeSymName));
- ad->AttrType = cpu_to_be16(RHBA_SYM_NODENAME);
- len = lpfc_vport_symbolic_node_name(vport,
- ae->un.NodeSymName, sizeof(ae->un.NodeSymName));
- len += (len & 3) ? (4 - (len & 3)) : 4;
- ad->AttrLen = cpu_to_be16(FOURBYTES + len);
- ab->EntryCnt++;
- size += FOURBYTES + len;
-hba_out:
- ab->EntryCnt = cpu_to_be32(ab->EntryCnt);
- /* Total size */
- size = GID_REQUEST_SZ - 4 + size;
+ mask = mask >> 1;
+ bit_pos++;
}
+hba_out:
+ ab->EntryCnt = cpu_to_be32(ab->EntryCnt);
+ /* Total size */
+ size = GID_REQUEST_SZ - 4 + size;
break;
case SLI_MGMT_RPRT:
case SLI_MGMT_RPA:
- {
- struct serv_parm *hsp;
- int len = 0;
-
- if (cmdcode == SLI_MGMT_RPRT) {
- rh = (struct lpfc_fdmi_reg_hba *)
- &CtReq->un.PortID;
- /* HBA Identifier */
- memcpy(&rh->hi.PortName,
- &vport->fc_sparam.portName,
- sizeof(struct lpfc_name));
- pab = (struct lpfc_fdmi_reg_portattr *)
- &rh->rpl.EntryCnt;
- } else
- pab = (struct lpfc_fdmi_reg_portattr *)
- &CtReq->un.PortID;
- size = sizeof(struct lpfc_name) + FOURBYTES;
- memcpy((uint8_t *)&pab->PortName,
- (uint8_t *)&vport->fc_sparam.portName,
+ pab = (struct lpfc_fdmi_reg_portattr *)&CtReq->un.PortID;
+ if (cmdcode == SLI_MGMT_RPRT) {
+ rh = (struct lpfc_fdmi_reg_hba *)pab;
+ /* HBA Identifier */
+ memcpy(&rh->hi.PortName,
+ &phba->pport->fc_sparam.portName,
sizeof(struct lpfc_name));
- pab->ab.EntryCnt = 0;
-
- /* #1 Port attribute entry */
- ad = (struct lpfc_fdmi_attr_def *)
- ((uint8_t *)pab + size);
- ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
- memset(ae, 0, sizeof(ae->un.FC4Types));
- ad->AttrType =
- cpu_to_be16(RPRT_SUPPORTED_FC4_TYPES);
- ad->AttrLen = cpu_to_be16(FOURBYTES + 32);
- ae->un.FC4Types[0] = 0x40; /* Type 1 - ELS */
- ae->un.FC4Types[1] = 0x80; /* Type 8 - FCP */
- ae->un.FC4Types[4] = 0x80; /* Type 32 - CT */
- pab->ab.EntryCnt++;
- size += FOURBYTES + 32;
-
- /* #2 Port attribute entry */
- ad = (struct lpfc_fdmi_attr_def *)
- ((uint8_t *)pab + size);
- ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
- ad->AttrType = cpu_to_be16(RPRT_SUPPORTED_SPEED);
- ad->AttrLen = cpu_to_be16(FOURBYTES + 4);
- ae->un.SupportSpeed = 0;
- if (phba->lmt & LMT_32Gb)
- ae->un.SupportSpeed |= HBA_PORTSPEED_32GBIT;
- if (phba->lmt & LMT_16Gb)
- ae->un.SupportSpeed |= HBA_PORTSPEED_16GBIT;
- if (phba->lmt & LMT_10Gb)
- ae->un.SupportSpeed |= HBA_PORTSPEED_10GBIT;
- if (phba->lmt & LMT_8Gb)
- ae->un.SupportSpeed |= HBA_PORTSPEED_8GBIT;
- if (phba->lmt & LMT_4Gb)
- ae->un.SupportSpeed |= HBA_PORTSPEED_4GBIT;
- if (phba->lmt & LMT_2Gb)
- ae->un.SupportSpeed |= HBA_PORTSPEED_2GBIT;
- if (phba->lmt & LMT_1Gb)
- ae->un.SupportSpeed |= HBA_PORTSPEED_1GBIT;
- ae->un.SupportSpeed =
- cpu_to_be32(ae->un.SupportSpeed);
-
- pab->ab.EntryCnt++;
- size += FOURBYTES + 4;
-
- /* #3 Port attribute entry */
- ad = (struct lpfc_fdmi_attr_def *)
- ((uint8_t *)pab + size);
- ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
- ad->AttrType = cpu_to_be16(RPRT_PORT_SPEED);
- ad->AttrLen = cpu_to_be16(FOURBYTES + 4);
- switch (phba->fc_linkspeed) {
- case LPFC_LINK_SPEED_1GHZ:
- ae->un.PortSpeed = HBA_PORTSPEED_1GBIT;
- break;
- case LPFC_LINK_SPEED_2GHZ:
- ae->un.PortSpeed = HBA_PORTSPEED_2GBIT;
- break;
- case LPFC_LINK_SPEED_4GHZ:
- ae->un.PortSpeed = HBA_PORTSPEED_4GBIT;
- break;
- case LPFC_LINK_SPEED_8GHZ:
- ae->un.PortSpeed = HBA_PORTSPEED_8GBIT;
- break;
- case LPFC_LINK_SPEED_10GHZ:
- ae->un.PortSpeed = HBA_PORTSPEED_10GBIT;
- break;
- case LPFC_LINK_SPEED_16GHZ:
- ae->un.PortSpeed = HBA_PORTSPEED_16GBIT;
- break;
- case LPFC_LINK_SPEED_32GHZ:
- ae->un.PortSpeed = HBA_PORTSPEED_32GBIT;
- break;
- default:
- ae->un.PortSpeed = HBA_PORTSPEED_UNKNOWN;
- break;
- }
- ae->un.PortSpeed = cpu_to_be32(ae->un.PortSpeed);
- pab->ab.EntryCnt++;
- size += FOURBYTES + 4;
-
- /* #4 Port attribute entry */
- ad = (struct lpfc_fdmi_attr_def *)
- ((uint8_t *)pab + size);
- ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
- ad->AttrType = cpu_to_be16(RPRT_MAX_FRAME_SIZE);
- ad->AttrLen = cpu_to_be16(FOURBYTES + 4);
- hsp = (struct serv_parm *)&vport->fc_sparam;
- ae->un.MaxFrameSize =
- (((uint32_t)hsp->cmn.
- bbRcvSizeMsb) << 8) | (uint32_t)hsp->cmn.
- bbRcvSizeLsb;
- ae->un.MaxFrameSize =
- cpu_to_be32(ae->un.MaxFrameSize);
- pab->ab.EntryCnt++;
- size += FOURBYTES + 4;
- if ((size + LPFC_FDMI_MAX_AE_SIZE) >
- (LPFC_BPL_SIZE - LPFC_CT_PREAMBLE))
- goto port_out;
-
- /* #5 Port attribute entry */
- ad = (struct lpfc_fdmi_attr_def *)
- ((uint8_t *)pab + size);
- ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
- memset(ae, 0, sizeof(ae->un.OsDeviceName));
- ad->AttrType = cpu_to_be16(RPRT_OS_DEVICE_NAME);
- strncpy((char *)ae->un.OsDeviceName, LPFC_DRIVER_NAME,
- sizeof(ae->un.OsDeviceName));
- len = strnlen((char *)ae->un.OsDeviceName,
- sizeof(ae->un.OsDeviceName));
- len += (len & 3) ? (4 - (len & 3)) : 4;
- ad->AttrLen = cpu_to_be16(FOURBYTES + len);
- pab->ab.EntryCnt++;
- size += FOURBYTES + len;
- if ((size + LPFC_FDMI_MAX_AE_SIZE) >
- (LPFC_BPL_SIZE - LPFC_CT_PREAMBLE))
- goto port_out;
-
- /* #6 Port attribute entry */
- ad = (struct lpfc_fdmi_attr_def *)
- ((uint8_t *)pab + size);
- ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
- memset(ae, 0, sizeof(ae->un.HostName));
- snprintf(ae->un.HostName, sizeof(ae->un.HostName), "%s",
- init_utsname()->nodename);
- ad->AttrType = cpu_to_be16(RPRT_HOST_NAME);
- len = strnlen(ae->un.HostName,
- sizeof(ae->un.HostName));
- len += (len & 3) ? (4 - (len & 3)) : 4;
- ad->AttrLen =
- cpu_to_be16(FOURBYTES + len);
- pab->ab.EntryCnt++;
- size += FOURBYTES + len;
- if ((size + sizeof(struct lpfc_name)) >
- (LPFC_BPL_SIZE - LPFC_CT_PREAMBLE))
- goto port_out;
+ pab = (struct lpfc_fdmi_reg_portattr *)
+ ((uint8_t *)pab + sizeof(struct lpfc_name));
+ }
- /*
- * Currently switches don't seem to support the
- * following extended Port attributes.
- */
- if (!(vport->cfg_fdmi_on & LPFC_FDMI_ALL_ATTRIB))
- goto port_out;
-
- /* #7 Port attribute entry */
- ad = (struct lpfc_fdmi_attr_def *)
- ((uint8_t *)pab + size);
- ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
- memset(ae, 0, sizeof(struct lpfc_name));
- ad->AttrType = cpu_to_be16(RPRT_NODENAME);
- ad->AttrLen = cpu_to_be16(FOURBYTES
- + sizeof(struct lpfc_name));
- memcpy(&ae->un.NodeName, &vport->fc_sparam.nodeName,
- sizeof(struct lpfc_name));
- pab->ab.EntryCnt++;
- size += FOURBYTES + sizeof(struct lpfc_name);
- if ((size + sizeof(struct lpfc_name)) >
- (LPFC_BPL_SIZE - LPFC_CT_PREAMBLE))
- goto port_out;
-
- /* #8 Port attribute entry */
- ad = (struct lpfc_fdmi_attr_def *)
- ((uint8_t *)pab + size);
- ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
- memset(ae, 0, sizeof(struct lpfc_name));
- ad->AttrType = cpu_to_be16(RPRT_PORTNAME);
- ad->AttrLen = cpu_to_be16(FOURBYTES
- + sizeof(struct lpfc_name));
- memcpy(&ae->un.PortName, &vport->fc_sparam.portName,
- sizeof(struct lpfc_name));
- pab->ab.EntryCnt++;
- size += FOURBYTES + sizeof(struct lpfc_name);
- if ((size + LPFC_FDMI_MAX_AE_SIZE) >
- (LPFC_BPL_SIZE - LPFC_CT_PREAMBLE))
- goto port_out;
-
- /* #9 Port attribute entry */
- ad = (struct lpfc_fdmi_attr_def *)
- ((uint8_t *)pab + size);
- ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
- memset(ae, 0, sizeof(ae->un.NodeSymName));
- ad->AttrType = cpu_to_be16(RPRT_SYM_PORTNAME);
- len = lpfc_vport_symbolic_port_name(vport,
- ae->un.NodeSymName, sizeof(ae->un.NodeSymName));
- len += (len & 3) ? (4 - (len & 3)) : 4;
- ad->AttrLen = cpu_to_be16(FOURBYTES + len);
- pab->ab.EntryCnt++;
- size += FOURBYTES + len;
- if ((size + 4) > (LPFC_BPL_SIZE - LPFC_CT_PREAMBLE))
- goto port_out;
-
- /* #10 Port attribute entry */
- ad = (struct lpfc_fdmi_attr_def *)
- ((uint8_t *)pab + size);
- ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
- ad->AttrType = cpu_to_be16(RPRT_PORT_TYPE);
- ae->un.PortState = 0;
- ad->AttrLen = cpu_to_be16(FOURBYTES + 4);
- pab->ab.EntryCnt++;
- size += FOURBYTES + 4;
- if ((size + 4) > (LPFC_BPL_SIZE - LPFC_CT_PREAMBLE))
- goto port_out;
-
- /* #11 Port attribute entry */
- ad = (struct lpfc_fdmi_attr_def *)
- ((uint8_t *)pab + size);
- ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
- ad->AttrType = cpu_to_be16(RPRT_SUPPORTED_CLASS);
- ae->un.SupportClass =
- cpu_to_be32(FC_COS_CLASS2 | FC_COS_CLASS3);
- ad->AttrLen = cpu_to_be16(FOURBYTES + 4);
- pab->ab.EntryCnt++;
- size += FOURBYTES + 4;
- if ((size + sizeof(struct lpfc_name)) >
- (LPFC_BPL_SIZE - LPFC_CT_PREAMBLE))
- goto port_out;
-
- /* #12 Port attribute entry */
- ad = (struct lpfc_fdmi_attr_def *)
- ((uint8_t *)pab + size);
- ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
- memset(ae, 0, sizeof(struct lpfc_name));
- ad->AttrType = cpu_to_be16(RPRT_FABRICNAME);
- ad->AttrLen = cpu_to_be16(FOURBYTES
- + sizeof(struct lpfc_name));
- memcpy(&ae->un.FabricName, &vport->fabric_nodename,
- sizeof(struct lpfc_name));
- pab->ab.EntryCnt++;
- size += FOURBYTES + sizeof(struct lpfc_name);
- if ((size + LPFC_FDMI_MAX_AE_SIZE) >
- (LPFC_BPL_SIZE - LPFC_CT_PREAMBLE))
- goto port_out;
-
- /* #13 Port attribute entry */
- ad = (struct lpfc_fdmi_attr_def *)
- ((uint8_t *)pab + size);
- ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
- memset(ae, 0, sizeof(ae->un.FC4Types));
- ad->AttrType =
- cpu_to_be16(RPRT_ACTIVE_FC4_TYPES);
- ad->AttrLen = cpu_to_be16(FOURBYTES + 32);
- ae->un.FC4Types[0] = 0x40; /* Type 1 - ELS */
- ae->un.FC4Types[1] = 0x80; /* Type 8 - FCP */
- ae->un.FC4Types[4] = 0x80; /* Type 32 - CT */
- pab->ab.EntryCnt++;
- size += FOURBYTES + 32;
- if ((size + 4) > (LPFC_BPL_SIZE - LPFC_CT_PREAMBLE))
- goto port_out;
-
- /* #257 Port attribute entry */
- ad = (struct lpfc_fdmi_attr_def *)
- ((uint8_t *)pab + size);
- ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
- ad->AttrType = cpu_to_be16(RPRT_PORT_STATE);
- ae->un.PortState = 0;
- ad->AttrLen = cpu_to_be16(FOURBYTES + 4);
- pab->ab.EntryCnt++;
- size += FOURBYTES + 4;
- if ((size + 4) > (LPFC_BPL_SIZE - LPFC_CT_PREAMBLE))
- goto port_out;
-
- /* #258 Port attribute entry */
- ad = (struct lpfc_fdmi_attr_def *)
- ((uint8_t *)pab + size);
- ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
- ad->AttrType = cpu_to_be16(RPRT_DISC_PORT);
- ae->un.PortState = lpfc_find_map_node(vport);
- ae->un.PortState = cpu_to_be32(ae->un.PortState);
- ad->AttrLen = cpu_to_be16(FOURBYTES + 4);
- pab->ab.EntryCnt++;
- size += FOURBYTES + 4;
- if ((size + 4) > (LPFC_BPL_SIZE - LPFC_CT_PREAMBLE))
- goto port_out;
-
- /* #259 Port attribute entry */
- ad = (struct lpfc_fdmi_attr_def *)
- ((uint8_t *)pab + size);
- ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
- ad->AttrType = cpu_to_be16(RPRT_PORT_ID);
- ae->un.PortId = cpu_to_be32(vport->fc_myDID);
- ad->AttrLen = cpu_to_be16(FOURBYTES + 4);
- pab->ab.EntryCnt++;
- size += FOURBYTES + 4;
-port_out:
- pab->ab.EntryCnt = cpu_to_be32(pab->ab.EntryCnt);
- /* Total size */
- size = GID_REQUEST_SZ - 4 + size;
+ memcpy((uint8_t *)&pab->PortName,
+ (uint8_t *)&vport->fc_sparam.portName,
+ sizeof(struct lpfc_name));
+ size += sizeof(struct lpfc_name) + FOURBYTES;
+ pab->ab.EntryCnt = 0;
+ bit_pos = 0;
+ if (new_mask)
+ mask = new_mask;
+ else
+ mask = vport->fdmi_port_mask;
+
+ /* Mask will dictate what attributes to build in the request */
+ while (mask) {
+ if (mask & 0x1) {
+ func = lpfc_fdmi_port_action[bit_pos];
+ size += func(vport,
+ (struct lpfc_fdmi_attr_def *)
+ ((uint8_t *)pab + size));
+ pab->ab.EntryCnt++;
+ if ((size + 256) >
+ (LPFC_BPL_SIZE - LPFC_CT_PREAMBLE))
+ goto port_out;
+ }
+ mask = mask >> 1;
+ bit_pos++;
}
+port_out:
+ pab->ab.EntryCnt = cpu_to_be32(pab->ab.EntryCnt);
+ /* Total size */
+ if (cmdcode == SLI_MGMT_RPRT)
+ size += sizeof(struct lpfc_name);
+ size = GID_REQUEST_SZ - 4 + size;
break;
case SLI_MGMT_GHAT:
@@ -2158,41 +2749,6 @@ lpfc_delayed_disc_timeout_handler(struct lpfc_vport *vport)
}
void
-lpfc_fdmi_tmo(unsigned long ptr)
-{
- struct lpfc_vport *vport = (struct lpfc_vport *)ptr;
- struct lpfc_hba *phba = vport->phba;
- uint32_t tmo_posted;
- unsigned long iflag;
-
- spin_lock_irqsave(&vport->work_port_lock, iflag);
- tmo_posted = vport->work_port_events & WORKER_FDMI_TMO;
- if (!tmo_posted)
- vport->work_port_events |= WORKER_FDMI_TMO;
- spin_unlock_irqrestore(&vport->work_port_lock, iflag);
-
- if (!tmo_posted)
- lpfc_worker_wake_up(phba);
- return;
-}
-
-void
-lpfc_fdmi_timeout_handler(struct lpfc_vport *vport)
-{
- struct lpfc_nodelist *ndlp;
-
- ndlp = lpfc_findnode_did(vport, FDMI_DID);
- if (ndlp && NLP_CHK_NODE_ACT(ndlp)) {
- if (init_utsname()->nodename[0] != '\0')
- lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_DHBA);
- else
- mod_timer(&vport->fc_fdmitmo, jiffies +
- msecs_to_jiffies(1000 * 60));
- }
- return;
-}
-
-void
lpfc_decode_firmware_rev(struct lpfc_hba *phba, char *fwrevision, int flag)
{
struct lpfc_sli *psli = &phba->sli;
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index b6fa257ea3e0..7f5abb8f52bc 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -455,9 +455,9 @@ int
lpfc_issue_reg_vfi(struct lpfc_vport *vport)
{
struct lpfc_hba *phba = vport->phba;
- LPFC_MBOXQ_t *mboxq;
+ LPFC_MBOXQ_t *mboxq = NULL;
struct lpfc_nodelist *ndlp;
- struct lpfc_dmabuf *dmabuf;
+ struct lpfc_dmabuf *dmabuf = NULL;
int rc = 0;
/* move forward in case of SLI4 FC port loopback test and pt2pt mode */
@@ -471,25 +471,33 @@ lpfc_issue_reg_vfi(struct lpfc_vport *vport)
}
}
- dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
- if (!dmabuf) {
+ mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq) {
rc = -ENOMEM;
goto fail;
}
- dmabuf->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &dmabuf->phys);
- if (!dmabuf->virt) {
- rc = -ENOMEM;
- goto fail_free_dmabuf;
- }
- mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
- if (!mboxq) {
- rc = -ENOMEM;
- goto fail_free_coherent;
+ /* Supply CSP's only if we are fabric connect or pt-to-pt connect */
+ if ((vport->fc_flag & FC_FABRIC) || (vport->fc_flag & FC_PT2PT)) {
+ dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+ if (!dmabuf) {
+ rc = -ENOMEM;
+ goto fail;
+ }
+ dmabuf->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &dmabuf->phys);
+ if (!dmabuf->virt) {
+ rc = -ENOMEM;
+ goto fail;
+ }
+ memcpy(dmabuf->virt, &phba->fc_fabparam,
+ sizeof(struct serv_parm));
}
+
vport->port_state = LPFC_FABRIC_CFG_LINK;
- memcpy(dmabuf->virt, &phba->fc_fabparam, sizeof(vport->fc_sparam));
- lpfc_reg_vfi(mboxq, vport, dmabuf->phys);
+ if (dmabuf)
+ lpfc_reg_vfi(mboxq, vport, dmabuf->phys);
+ else
+ lpfc_reg_vfi(mboxq, vport, 0);
mboxq->mbox_cmpl = lpfc_mbx_cmpl_reg_vfi;
mboxq->vport = vport;
@@ -497,17 +505,19 @@ lpfc_issue_reg_vfi(struct lpfc_vport *vport)
rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
if (rc == MBX_NOT_FINISHED) {
rc = -ENXIO;
- goto fail_free_mbox;
+ goto fail;
}
return 0;
-fail_free_mbox:
- mempool_free(mboxq, phba->mbox_mem_pool);
-fail_free_coherent:
- lpfc_mbuf_free(phba, dmabuf->virt, dmabuf->phys);
-fail_free_dmabuf:
- kfree(dmabuf);
fail:
+ if (mboxq)
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ if (dmabuf) {
+ if (dmabuf->virt)
+ lpfc_mbuf_free(phba, dmabuf->virt, dmabuf->phys);
+ kfree(dmabuf);
+ }
+
lpfc_vport_set_state(vport, FC_VPORT_FAILED);
lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
"0289 Issue Register VFI failed: Err %d\n", rc);
@@ -678,6 +688,21 @@ lpfc_cmpl_els_flogi_fabric(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
sp->cmn.bbRcvSizeLsb;
fabric_param_changed = lpfc_check_clean_addr_bit(vport, sp);
+ if (fabric_param_changed) {
+ /* Reset FDMI attribute masks based on config parameter */
+ if (phba->cfg_fdmi_on == LPFC_FDMI_NO_SUPPORT) {
+ vport->fdmi_hba_mask = 0;
+ vport->fdmi_port_mask = 0;
+ } else {
+ /* Setup appropriate attribute masks */
+ vport->fdmi_hba_mask = LPFC_FDMI2_HBA_ATTR;
+ if (phba->cfg_fdmi_on == LPFC_FDMI_SMART_SAN)
+ vport->fdmi_port_mask = LPFC_FDMI2_SMART_ATTR;
+ else
+ vport->fdmi_port_mask = LPFC_FDMI2_PORT_ATTR;
+ }
+
+ }
memcpy(&vport->fabric_portname, &sp->portName,
sizeof(struct lpfc_name));
memcpy(&vport->fabric_nodename, &sp->nodeName,
@@ -711,9 +736,10 @@ lpfc_cmpl_els_flogi_fabric(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
* For FC we need to do some special processing because of the SLI
* Port's default settings of the Common Service Parameters.
*/
- if (phba->sli4_hba.lnk_info.lnk_tp == LPFC_LNK_TYPE_FC) {
+ if ((phba->sli_rev == LPFC_SLI_REV4) &&
+ (phba->sli4_hba.lnk_info.lnk_tp == LPFC_LNK_TYPE_FC)) {
/* If physical FC port changed, unreg VFI and ALL VPIs / RPIs */
- if ((phba->sli_rev == LPFC_SLI_REV4) && fabric_param_changed)
+ if (fabric_param_changed)
lpfc_unregister_fcf_prep(phba);
/* This should just update the VFI CSPs*/
@@ -824,13 +850,21 @@ lpfc_cmpl_els_flogi_nport(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
spin_lock_irq(shost->host_lock);
vport->fc_flag &= ~(FC_FABRIC | FC_PUBLIC_LOOP);
+ vport->fc_flag |= FC_PT2PT;
spin_unlock_irq(shost->host_lock);
- phba->fc_edtov = FF_DEF_EDTOV;
- phba->fc_ratov = FF_DEF_RATOV;
+ /* If physical FC port changed, unreg VFI and ALL VPIs / RPIs */
+ if ((phba->sli_rev == LPFC_SLI_REV4) && phba->fc_topology_changed) {
+ lpfc_unregister_fcf_prep(phba);
+
+ spin_lock_irq(shost->host_lock);
+ vport->fc_flag &= ~FC_VFI_REGISTERED;
+ spin_unlock_irq(shost->host_lock);
+ phba->fc_topology_changed = 0;
+ }
+
rc = memcmp(&vport->fc_portname, &sp->portName,
sizeof(vport->fc_portname));
- memcpy(&phba->fc_fabparam, sp, sizeof(struct serv_parm));
if (rc >= 0) {
/* This side will initiate the PLOGI */
@@ -839,38 +873,14 @@ lpfc_cmpl_els_flogi_nport(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
spin_unlock_irq(shost->host_lock);
/*
- * N_Port ID cannot be 0, set our to LocalID the other
- * side will be RemoteID.
+ * N_Port ID cannot be 0, set our Id to LocalID
+ * the other side will be RemoteID.
*/
/* not equal */
if (rc)
vport->fc_myDID = PT2PT_LocalID;
- mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
- if (!mbox)
- goto fail;
-
- lpfc_config_link(phba, mbox);
-
- mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
- mbox->vport = vport;
- rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
- if (rc == MBX_NOT_FINISHED) {
- mempool_free(mbox, phba->mbox_mem_pool);
- goto fail;
- }
-
- /*
- * For SLI4, the VFI/VPI are registered AFTER the
- * Nport with the higher WWPN sends the PLOGI with
- * an assigned NPortId.
- */
-
- /* not equal */
- if ((phba->sli_rev == LPFC_SLI_REV4) && rc)
- lpfc_issue_reg_vfi(vport);
-
/* Decrement ndlp reference count indicating that ndlp can be
* safely released when other references to it are done.
*/
@@ -912,29 +922,20 @@ lpfc_cmpl_els_flogi_nport(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
/* If we are pt2pt with another NPort, force NPIV off! */
phba->sli3_options &= ~LPFC_SLI3_NPIV_ENABLED;
- spin_lock_irq(shost->host_lock);
- vport->fc_flag |= FC_PT2PT;
- spin_unlock_irq(shost->host_lock);
- /* If physical FC port changed, unreg VFI and ALL VPIs / RPIs */
- if ((phba->sli_rev == LPFC_SLI_REV4) && phba->fc_topology_changed) {
- lpfc_unregister_fcf_prep(phba);
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ goto fail;
- /* The FC_VFI_REGISTERED flag will get clear in the cmpl
- * handler for unreg_vfi, but if we don't force the
- * FC_VFI_REGISTERED flag then the reg_vfi mailbox could be
- * built with the update bit set instead of just the vp bit to
- * change the Nport ID. We need to have the vp set and the
- * Upd cleared on topology changes.
- */
- spin_lock_irq(shost->host_lock);
- vport->fc_flag &= ~FC_VFI_REGISTERED;
- spin_unlock_irq(shost->host_lock);
- phba->fc_topology_changed = 0;
- lpfc_issue_reg_vfi(vport);
+ lpfc_config_link(phba, mbox);
+
+ mbox->mbox_cmpl = lpfc_mbx_cmpl_local_config_link;
+ mbox->vport = vport;
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
+ if (rc == MBX_NOT_FINISHED) {
+ mempool_free(mbox, phba->mbox_mem_pool);
+ goto fail;
}
- /* Start discovery - this should just do CLEAR_LA */
- lpfc_disc_start(vport);
return 0;
fail:
return -ENXIO;
@@ -1157,6 +1158,7 @@ flogifail:
spin_lock_irq(&phba->hbalock);
phba->fcf.fcf_flag &= ~FCF_DISCOVERY;
spin_unlock_irq(&phba->hbalock);
+
lpfc_nlp_put(ndlp);
if (!lpfc_error_lost_link(irsp)) {
@@ -3792,14 +3794,17 @@ lpfc_cmpl_els_rsp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
lpfc_nlp_set_state(vport, ndlp,
NLP_STE_REG_LOGIN_ISSUE);
}
+
+ ndlp->nlp_flag |= NLP_REG_LOGIN_SEND;
if (lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT)
!= MBX_NOT_FINISHED)
goto out;
- else
- /* Decrement the ndlp reference count we
- * set for this failed mailbox command.
- */
- lpfc_nlp_put(ndlp);
+
+ /* Decrement the ndlp reference count we
+ * set for this failed mailbox command.
+ */
+ lpfc_nlp_put(ndlp);
+ ndlp->nlp_flag &= ~NLP_REG_LOGIN_SEND;
/* ELS rsp: Cannot issue reg_login for <NPortid> */
lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
@@ -3856,6 +3861,7 @@ out:
* the routine lpfc_els_free_iocb.
*/
cmdiocb->context1 = NULL;
+
}
lpfc_els_free_iocb(phba, cmdiocb);
@@ -3898,6 +3904,7 @@ lpfc_els_rsp_acc(struct lpfc_vport *vport, uint32_t flag,
IOCB_t *oldcmd;
struct lpfc_iocbq *elsiocb;
uint8_t *pcmd;
+ struct serv_parm *sp;
uint16_t cmdsize;
int rc;
ELS_PKT *els_pkt_ptr;
@@ -3927,6 +3934,7 @@ lpfc_els_rsp_acc(struct lpfc_vport *vport, uint32_t flag,
"Issue ACC: did:x%x flg:x%x",
ndlp->nlp_DID, ndlp->nlp_flag, 0);
break;
+ case ELS_CMD_FLOGI:
case ELS_CMD_PLOGI:
cmdsize = (sizeof(struct serv_parm) + sizeof(uint32_t));
elsiocb = lpfc_prep_els_iocb(vport, 0, cmdsize, oldiocb->retry,
@@ -3944,10 +3952,34 @@ lpfc_els_rsp_acc(struct lpfc_vport *vport, uint32_t flag,
*((uint32_t *) (pcmd)) = ELS_CMD_ACC;
pcmd += sizeof(uint32_t);
- memcpy(pcmd, &vport->fc_sparam, sizeof(struct serv_parm));
+ sp = (struct serv_parm *)pcmd;
+
+ if (flag == ELS_CMD_FLOGI) {
+ /* Copy the received service parameters back */
+ memcpy(sp, &phba->fc_fabparam,
+ sizeof(struct serv_parm));
+
+ /* Clear the F_Port bit */
+ sp->cmn.fPort = 0;
+
+ /* Mark all class service parameters as invalid */
+ sp->cls1.classValid = 0;
+ sp->cls2.classValid = 0;
+ sp->cls3.classValid = 0;
+ sp->cls4.classValid = 0;
+
+ /* Copy our worldwide names */
+ memcpy(&sp->portName, &vport->fc_sparam.portName,
+ sizeof(struct lpfc_name));
+ memcpy(&sp->nodeName, &vport->fc_sparam.nodeName,
+ sizeof(struct lpfc_name));
+ } else {
+ memcpy(pcmd, &vport->fc_sparam,
+ sizeof(struct serv_parm));
+ }
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_RSP,
- "Issue ACC PLOGI: did:x%x flg:x%x",
+ "Issue ACC FLOGI/PLOGI: did:x%x flg:x%x",
ndlp->nlp_DID, ndlp->nlp_flag, 0);
break;
case ELS_CMD_PRLO:
@@ -4673,6 +4705,23 @@ lpfc_rdp_res_link_error(struct fc_rdp_link_error_status_desc *desc,
desc->length = cpu_to_be32(sizeof(desc->info));
}
+int
+lpfc_rdp_res_fec_desc(struct fc_fec_rdp_desc *desc, READ_LNK_VAR *stat)
+{
+ if (bf_get(lpfc_read_link_stat_gec2, stat) == 0)
+ return 0;
+ desc->tag = cpu_to_be32(RDP_FEC_DESC_TAG);
+
+ desc->info.CorrectedBlocks =
+ cpu_to_be32(stat->fecCorrBlkCount);
+ desc->info.UncorrectableBlocks =
+ cpu_to_be32(stat->fecUncorrBlkCount);
+
+ desc->length = cpu_to_be32(sizeof(desc->info));
+
+ return sizeof(struct fc_fec_rdp_desc);
+}
+
void
lpfc_rdp_res_speed(struct fc_rdp_port_speed_desc *desc, struct lpfc_hba *phba)
{
@@ -4681,26 +4730,26 @@ lpfc_rdp_res_speed(struct fc_rdp_port_speed_desc *desc, struct lpfc_hba *phba)
desc->tag = cpu_to_be32(RDP_PORT_SPEED_DESC_TAG);
- switch (phba->sli4_hba.link_state.speed) {
- case LPFC_FC_LA_SPEED_1G:
+ switch (phba->fc_linkspeed) {
+ case LPFC_LINK_SPEED_1GHZ:
rdp_speed = RDP_PS_1GB;
break;
- case LPFC_FC_LA_SPEED_2G:
+ case LPFC_LINK_SPEED_2GHZ:
rdp_speed = RDP_PS_2GB;
break;
- case LPFC_FC_LA_SPEED_4G:
+ case LPFC_LINK_SPEED_4GHZ:
rdp_speed = RDP_PS_4GB;
break;
- case LPFC_FC_LA_SPEED_8G:
+ case LPFC_LINK_SPEED_8GHZ:
rdp_speed = RDP_PS_8GB;
break;
- case LPFC_FC_LA_SPEED_10G:
+ case LPFC_LINK_SPEED_10GHZ:
rdp_speed = RDP_PS_10GB;
break;
- case LPFC_FC_LA_SPEED_16G:
+ case LPFC_LINK_SPEED_16GHZ:
rdp_speed = RDP_PS_16GB;
break;
- case LPFC_FC_LA_SPEED_32G:
+ case LPFC_LINK_SPEED_32GHZ:
rdp_speed = RDP_PS_32GB;
break;
default:
@@ -4778,15 +4827,18 @@ lpfc_els_rdp_cmpl(struct lpfc_hba *phba, struct lpfc_rdp_context *rdp_context,
struct lpfc_nodelist *ndlp = rdp_context->ndlp;
struct lpfc_vport *vport = ndlp->vport;
struct lpfc_iocbq *elsiocb;
+ struct ulp_bde64 *bpl;
IOCB_t *icmd;
uint8_t *pcmd;
struct ls_rjt *stat;
struct fc_rdp_res_frame *rdp_res;
uint32_t cmdsize;
- int rc;
+ int rc, fec_size;
if (status != SUCCESS)
goto error;
+
+ /* This will change once we know the true size of the RDP payload */
cmdsize = sizeof(struct fc_rdp_res_frame);
elsiocb = lpfc_prep_els_iocb(vport, 0, cmdsize,
@@ -4823,10 +4875,18 @@ lpfc_els_rdp_cmpl(struct lpfc_hba *phba, struct lpfc_rdp_context *rdp_context,
lpfc_rdp_res_diag_port_names(&rdp_res->diag_port_names_desc, phba);
lpfc_rdp_res_attach_port_names(&rdp_res->attached_port_names_desc,
vport, ndlp);
- rdp_res->length = cpu_to_be32(RDP_DESC_PAYLOAD_SIZE);
-
+ fec_size = lpfc_rdp_res_fec_desc(&rdp_res->fec_desc,
+ &rdp_context->link_stat);
+ rdp_res->length = cpu_to_be32(fec_size + RDP_DESC_PAYLOAD_SIZE);
elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
+ /* Now that we know the true size of the payload, update the BPL */
+ bpl = (struct ulp_bde64 *)
+ (((struct lpfc_dmabuf *)(elsiocb->context3))->virt);
+ bpl->tus.f.bdeSize = (fec_size + RDP_DESC_PAYLOAD_SIZE + 8);
+ bpl->tus.f.bdeFlags = 0;
+ bpl->tus.w = le32_to_cpu(bpl->tus.w);
+
phba->fc_stat.elsXmitACC++;
rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (rc == IOCB_ERROR)
@@ -4956,13 +5016,12 @@ lpfc_els_rcv_rdp(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
if (RDP_NPORT_ID_SIZE !=
be32_to_cpu(rdp_req->nport_id_desc.length))
goto rjt_logerr;
- rdp_context = kmalloc(sizeof(struct lpfc_rdp_context), GFP_KERNEL);
+ rdp_context = kzalloc(sizeof(struct lpfc_rdp_context), GFP_KERNEL);
if (!rdp_context) {
rjt_err = LSRJT_UNABLE_TPC;
goto error;
}
- memset(rdp_context, 0, sizeof(struct lpfc_rdp_context));
cmd = &cmdiocb->iocb;
rdp_context->ndlp = lpfc_nlp_get(ndlp);
rdp_context->ox_id = cmd->unsli3.rcvsli3.ox_id;
@@ -5739,7 +5798,6 @@ lpfc_els_rcv_flogi(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
IOCB_t *icmd = &cmdiocb->iocb;
struct serv_parm *sp;
LPFC_MBOXQ_t *mbox;
- struct ls_rjt stat;
uint32_t cmd, did;
int rc;
uint32_t fc_flag = 0;
@@ -5765,135 +5823,92 @@ lpfc_els_rcv_flogi(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
return 1;
}
- if ((lpfc_check_sparm(vport, ndlp, sp, CLASS3, 1))) {
- /* For a FLOGI we accept, then if our portname is greater
- * then the remote portname we initiate Nport login.
- */
+ (void) lpfc_check_sparm(vport, ndlp, sp, CLASS3, 1);
- rc = memcmp(&vport->fc_portname, &sp->portName,
- sizeof(struct lpfc_name));
- if (!rc) {
- if (phba->sli_rev < LPFC_SLI_REV4) {
- mbox = mempool_alloc(phba->mbox_mem_pool,
- GFP_KERNEL);
- if (!mbox)
- return 1;
- lpfc_linkdown(phba);
- lpfc_init_link(phba, mbox,
- phba->cfg_topology,
- phba->cfg_link_speed);
- mbox->u.mb.un.varInitLnk.lipsr_AL_PA = 0;
- mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
- mbox->vport = vport;
- rc = lpfc_sli_issue_mbox(phba, mbox,
- MBX_NOWAIT);
- lpfc_set_loopback_flag(phba);
- if (rc == MBX_NOT_FINISHED)
- mempool_free(mbox, phba->mbox_mem_pool);
- return 1;
- } else {
- /* abort the flogi coming back to ourselves
- * due to external loopback on the port.
- */
- lpfc_els_abort_flogi(phba);
- return 0;
- }
- } else if (rc > 0) { /* greater than */
- spin_lock_irq(shost->host_lock);
- vport->fc_flag |= FC_PT2PT_PLOGI;
- spin_unlock_irq(shost->host_lock);
+ /*
+ * If our portname is greater than the remote portname,
+ * then we initiate Nport login.
+ */
- /* If we have the high WWPN we can assign our own
- * myDID; otherwise, we have to WAIT for a PLOGI
- * from the remote NPort to find out what it
- * will be.
- */
- vport->fc_myDID = PT2PT_LocalID;
- } else
- vport->fc_myDID = PT2PT_RemoteID;
+ rc = memcmp(&vport->fc_portname, &sp->portName,
+ sizeof(struct lpfc_name));
- /*
- * The vport state should go to LPFC_FLOGI only
- * AFTER we issue a FLOGI, not receive one.
+ if (!rc) {
+ if (phba->sli_rev < LPFC_SLI_REV4) {
+ mbox = mempool_alloc(phba->mbox_mem_pool,
+ GFP_KERNEL);
+ if (!mbox)
+ return 1;
+ lpfc_linkdown(phba);
+ lpfc_init_link(phba, mbox,
+ phba->cfg_topology,
+ phba->cfg_link_speed);
+ mbox->u.mb.un.varInitLnk.lipsr_AL_PA = 0;
+ mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+ mbox->vport = vport;
+ rc = lpfc_sli_issue_mbox(phba, mbox,
+ MBX_NOWAIT);
+ lpfc_set_loopback_flag(phba);
+ if (rc == MBX_NOT_FINISHED)
+ mempool_free(mbox, phba->mbox_mem_pool);
+ return 1;
+ }
+
+ /* abort the flogi coming back to ourselves
+ * due to external loopback on the port.
*/
+ lpfc_els_abort_flogi(phba);
+ return 0;
+
+ } else if (rc > 0) { /* greater than */
spin_lock_irq(shost->host_lock);
- fc_flag = vport->fc_flag;
- port_state = vport->port_state;
- vport->fc_flag |= FC_PT2PT;
- vport->fc_flag &= ~(FC_FABRIC | FC_PUBLIC_LOOP);
+ vport->fc_flag |= FC_PT2PT_PLOGI;
spin_unlock_irq(shost->host_lock);
- lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
- "3311 Rcv Flogi PS x%x new PS x%x "
- "fc_flag x%x new fc_flag x%x\n",
- port_state, vport->port_state,
- fc_flag, vport->fc_flag);
- /*
- * We temporarily set fc_myDID to make it look like we are
- * a Fabric. This is done just so we end up with the right
- * did / sid on the FLOGI ACC rsp.
+ /* If we have the high WWPN we can assign our own
+ * myDID; otherwise, we have to WAIT for a PLOGI
+ * from the remote NPort to find out what it
+ * will be.
*/
- did = vport->fc_myDID;
- vport->fc_myDID = Fabric_DID;
-
+ vport->fc_myDID = PT2PT_LocalID;
} else {
- /* Reject this request because invalid parameters */
- stat.un.b.lsRjtRsvd0 = 0;
- stat.un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC;
- stat.un.b.lsRjtRsnCodeExp = LSEXP_SPARM_OPTIONS;
- stat.un.b.vendorUnique = 0;
-
- /*
- * We temporarily set fc_myDID to make it look like we are
- * a Fabric. This is done just so we end up with the right
- * did / sid on the FLOGI LS_RJT rsp.
- */
- did = vport->fc_myDID;
- vport->fc_myDID = Fabric_DID;
-
- lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb, ndlp,
- NULL);
+ vport->fc_myDID = PT2PT_RemoteID;
+ }
- /* Now lets put fc_myDID back to what its supposed to be */
- vport->fc_myDID = did;
+ /*
+ * The vport state should go to LPFC_FLOGI only
+ * AFTER we issue a FLOGI, not receive one.
+ */
+ spin_lock_irq(shost->host_lock);
+ fc_flag = vport->fc_flag;
+ port_state = vport->port_state;
+ vport->fc_flag |= FC_PT2PT;
+ vport->fc_flag &= ~(FC_FABRIC | FC_PUBLIC_LOOP);
+ spin_unlock_irq(shost->host_lock);
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
+ "3311 Rcv Flogi PS x%x new PS x%x "
+ "fc_flag x%x new fc_flag x%x\n",
+ port_state, vport->port_state,
+ fc_flag, vport->fc_flag);
- return 1;
- }
+ /*
+ * We temporarily set fc_myDID to make it look like we are
+ * a Fabric. This is done just so we end up with the right
+ * did / sid on the FLOGI ACC rsp.
+ */
+ did = vport->fc_myDID;
+ vport->fc_myDID = Fabric_DID;
- /* send our FLOGI first */
- if (vport->port_state < LPFC_FLOGI) {
- vport->fc_myDID = 0;
- lpfc_initial_flogi(vport);
- vport->fc_myDID = Fabric_DID;
- }
+ memcpy(&phba->fc_fabparam, sp, sizeof(struct serv_parm));
/* Send back ACC */
- lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, cmdiocb, ndlp, NULL);
+ lpfc_els_rsp_acc(vport, ELS_CMD_FLOGI, cmdiocb, ndlp, NULL);
/* Now lets put fc_myDID back to what its supposed to be */
vport->fc_myDID = did;
- if (!(vport->fc_flag & FC_PT2PT_PLOGI)) {
-
- mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
- if (!mbox)
- goto fail;
-
- lpfc_config_link(phba, mbox);
-
- mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
- mbox->vport = vport;
- rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
- if (rc == MBX_NOT_FINISHED) {
- mempool_free(mbox, phba->mbox_mem_pool);
- goto fail;
- }
- }
-
return 0;
-fail:
- return 1;
}
/**
@@ -7345,7 +7360,7 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
/* reject till our FLOGI completes */
if ((vport->port_state < LPFC_FABRIC_CFG_LINK) &&
- (cmd != ELS_CMD_FLOGI)) {
+ (cmd != ELS_CMD_FLOGI)) {
rjt_err = LSRJT_UNABLE_TPC;
rjt_exp = LSEXP_NOTHING_MORE;
goto lsrjt;
@@ -7381,6 +7396,7 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
rjt_exp = LSEXP_NOTHING_MORE;
break;
}
+
if (vport->port_state < LPFC_DISC_AUTH) {
if (!(phba->pport->fc_flag & FC_PT2PT) ||
(phba->pport->fc_flag & FC_PT2PT_PLOGI)) {
@@ -7730,6 +7746,35 @@ lpfc_els_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
}
}
+void
+lpfc_start_fdmi(struct lpfc_vport *vport)
+{
+ struct lpfc_hba *phba = vport->phba;
+ struct lpfc_nodelist *ndlp;
+
+ /* If this is the first time, allocate an ndlp and initialize
+ * it. Otherwise, make sure the node is enabled and then do the
+ * login.
+ */
+ ndlp = lpfc_findnode_did(vport, FDMI_DID);
+ if (!ndlp) {
+ ndlp = mempool_alloc(phba->nlp_mem_pool, GFP_KERNEL);
+ if (ndlp) {
+ lpfc_nlp_init(vport, ndlp, FDMI_DID);
+ ndlp->nlp_type |= NLP_FABRIC;
+ } else {
+ return;
+ }
+ }
+ if (!NLP_CHK_NODE_ACT(ndlp))
+ ndlp = lpfc_enable_node(vport, ndlp, NLP_STE_NPR_NODE);
+
+ if (ndlp) {
+ lpfc_nlp_set_state(vport, ndlp, NLP_STE_PLOGI_ISSUE);
+ lpfc_issue_els_plogi(vport, ndlp->nlp_DID, 0);
+ }
+}
+
/**
* lpfc_do_scr_ns_plogi - Issue a plogi to the name server for scr
* @phba: pointer to lpfc hba data structure.
@@ -7746,7 +7791,7 @@ lpfc_els_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
void
lpfc_do_scr_ns_plogi(struct lpfc_hba *phba, struct lpfc_vport *vport)
{
- struct lpfc_nodelist *ndlp, *ndlp_fdmi;
+ struct lpfc_nodelist *ndlp;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
/*
@@ -7804,32 +7849,9 @@ lpfc_do_scr_ns_plogi(struct lpfc_hba *phba, struct lpfc_vport *vport)
return;
}
- if (vport->cfg_fdmi_on & LPFC_FDMI_SUPPORT) {
- /* If this is the first time, allocate an ndlp and initialize
- * it. Otherwise, make sure the node is enabled and then do the
- * login.
- */
- ndlp_fdmi = lpfc_findnode_did(vport, FDMI_DID);
- if (!ndlp_fdmi) {
- ndlp_fdmi = mempool_alloc(phba->nlp_mem_pool,
- GFP_KERNEL);
- if (ndlp_fdmi) {
- lpfc_nlp_init(vport, ndlp_fdmi, FDMI_DID);
- ndlp_fdmi->nlp_type |= NLP_FABRIC;
- } else
- return;
- }
- if (!NLP_CHK_NODE_ACT(ndlp_fdmi))
- ndlp_fdmi = lpfc_enable_node(vport,
- ndlp_fdmi,
- NLP_STE_NPR_NODE);
-
- if (ndlp_fdmi) {
- lpfc_nlp_set_state(vport, ndlp_fdmi,
- NLP_STE_PLOGI_ISSUE);
- lpfc_issue_els_plogi(vport, ndlp_fdmi->nlp_DID, 0);
- }
- }
+ if ((phba->cfg_fdmi_on > LPFC_FDMI_NO_SUPPORT) &&
+ (vport->load_flag & FC_ALLOW_FDMI))
+ lpfc_start_fdmi(vport);
}
/**
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index bfc2442dd74a..c37d72effbff 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -674,8 +674,6 @@ lpfc_work_done(struct lpfc_hba *phba)
lpfc_mbox_timeout_handler(phba);
if (work_port_events & WORKER_FABRIC_BLOCK_TMO)
lpfc_unblock_fabric_iocbs(phba);
- if (work_port_events & WORKER_FDMI_TMO)
- lpfc_fdmi_timeout_handler(vport);
if (work_port_events & WORKER_RAMP_DOWN_QUEUE)
lpfc_ramp_down_queue_handler(phba);
if (work_port_events & WORKER_DELAYED_DISC_TMO)
@@ -1083,7 +1081,7 @@ out:
}
-static void
+void
lpfc_mbx_cmpl_local_config_link(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
struct lpfc_vport *vport = pmb->vport;
@@ -1113,8 +1111,10 @@ lpfc_mbx_cmpl_local_config_link(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
/* Start discovery by sending a FLOGI. port_state is identically
* LPFC_FLOGI while waiting for FLOGI cmpl
*/
- if (vport->port_state != LPFC_FLOGI || vport->fc_flag & FC_PT2PT_PLOGI)
+ if (vport->port_state != LPFC_FLOGI)
lpfc_initial_flogi(vport);
+ else if (vport->fc_flag & FC_PT2PT)
+ lpfc_disc_start(vport);
return;
out:
@@ -2963,8 +2963,10 @@ lpfc_mbx_cmpl_reg_vfi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
out_free_mem:
mempool_free(mboxq, phba->mbox_mem_pool);
- lpfc_mbuf_free(phba, dmabuf->virt, dmabuf->phys);
- kfree(dmabuf);
+ if (dmabuf) {
+ lpfc_mbuf_free(phba, dmabuf->virt, dmabuf->phys);
+ kfree(dmabuf);
+ }
return;
}
@@ -3035,19 +3037,22 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la)
uint32_t fc_flags = 0;
spin_lock_irq(&phba->hbalock);
- switch (bf_get(lpfc_mbx_read_top_link_spd, la)) {
- case LPFC_LINK_SPEED_1GHZ:
- case LPFC_LINK_SPEED_2GHZ:
- case LPFC_LINK_SPEED_4GHZ:
- case LPFC_LINK_SPEED_8GHZ:
- case LPFC_LINK_SPEED_10GHZ:
- case LPFC_LINK_SPEED_16GHZ:
- case LPFC_LINK_SPEED_32GHZ:
- phba->fc_linkspeed = bf_get(lpfc_mbx_read_top_link_spd, la);
- break;
- default:
- phba->fc_linkspeed = LPFC_LINK_SPEED_UNKNOWN;
- break;
+ phba->fc_linkspeed = bf_get(lpfc_mbx_read_top_link_spd, la);
+
+ if (!(phba->hba_flag & HBA_FCOE_MODE)) {
+ switch (bf_get(lpfc_mbx_read_top_link_spd, la)) {
+ case LPFC_LINK_SPEED_1GHZ:
+ case LPFC_LINK_SPEED_2GHZ:
+ case LPFC_LINK_SPEED_4GHZ:
+ case LPFC_LINK_SPEED_8GHZ:
+ case LPFC_LINK_SPEED_10GHZ:
+ case LPFC_LINK_SPEED_16GHZ:
+ case LPFC_LINK_SPEED_32GHZ:
+ break;
+ default:
+ phba->fc_linkspeed = LPFC_LINK_SPEED_UNKNOWN;
+ break;
+ }
}
if (phba->fc_topology &&
@@ -3448,10 +3453,10 @@ lpfc_mbx_cmpl_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag &= ~NLP_IGNR_REG_CMPL;
spin_unlock_irq(shost->host_lock);
- } else
- /* Good status, call state machine */
- lpfc_disc_state_machine(vport, ndlp, pmb,
- NLP_EVT_CMPL_REG_LOGIN);
+ }
+
+ /* Call state machine */
+ lpfc_disc_state_machine(vport, ndlp, pmb, NLP_EVT_CMPL_REG_LOGIN);
lpfc_mbuf_free(phba, mp->virt, mp->phys);
kfree(mp);
@@ -5550,15 +5555,15 @@ lpfc_mbx_cmpl_fdmi_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
ndlp->nlp_usg_map, ndlp);
/*
* Start issuing Fabric-Device Management Interface (FDMI) command to
- * 0xfffffa (FDMI well known port) or Delay issuing FDMI command if
- * fdmi-on=2 (supporting RPA/hostnmae)
+ * 0xfffffa (FDMI well known port).
+ * DHBA -> DPRT -> RHBA -> RPA (physical port)
+ * DPRT -> RPRT (vports)
*/
-
- if (vport->cfg_fdmi_on & LPFC_FDMI_REG_DELAY)
- mod_timer(&vport->fc_fdmitmo,
- jiffies + msecs_to_jiffies(1000 * 60));
+ if (vport->port_type == LPFC_PHYSICAL_PORT)
+ lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_DHBA, 0);
else
- lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_DHBA);
+ lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_DPRT, 0);
+
/* decrement the node reference count held for this callback
* function.
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 2cce88e967ce..dd20412c7e4c 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1097,6 +1097,18 @@ struct fc_rdp_port_name_desc {
};
+struct fc_rdp_fec_info {
+ uint32_t CorrectedBlocks;
+ uint32_t UncorrectableBlocks;
+};
+
+#define RDP_FEC_DESC_TAG 0x00010005
+struct fc_fec_rdp_desc {
+ uint32_t tag;
+ uint32_t length;
+ struct fc_rdp_fec_info info;
+};
+
struct fc_rdp_link_error_status_payload_info {
struct fc_link_status link_status; /* 24 bytes */
uint32_t port_type; /* bits 31-30 only */
@@ -1196,14 +1208,15 @@ struct fc_rdp_res_frame {
struct fc_rdp_link_error_status_desc link_error_desc; /* Word 13-21 */
struct fc_rdp_port_name_desc diag_port_names_desc; /* Word 22-27 */
struct fc_rdp_port_name_desc attached_port_names_desc;/* Word 28-33 */
+ struct fc_fec_rdp_desc fec_desc; /* FC Word 34 - 37 */
};
#define RDP_DESC_PAYLOAD_SIZE (sizeof(struct fc_rdp_link_service_desc) \
- + sizeof(struct fc_rdp_sfp_desc) \
- + sizeof(struct fc_rdp_port_speed_desc) \
- + sizeof(struct fc_rdp_link_error_status_desc) \
- + (sizeof(struct fc_rdp_port_name_desc) * 2))
+ + sizeof(struct fc_rdp_sfp_desc) \
+ + sizeof(struct fc_rdp_port_speed_desc) \
+ + sizeof(struct fc_rdp_link_error_status_desc) \
+ + (sizeof(struct fc_rdp_port_name_desc) * 2))
/******** FDMI ********/
@@ -1233,31 +1246,10 @@ struct lpfc_fdmi_attr_def { /* Defined in TLV format */
/* Attribute Entry */
struct lpfc_fdmi_attr_entry {
union {
- uint32_t VendorSpecific;
- uint32_t SupportClass;
- uint32_t SupportSpeed;
- uint32_t PortSpeed;
- uint32_t MaxFrameSize;
- uint32_t MaxCTPayloadLen;
- uint32_t PortState;
- uint32_t PortId;
- struct lpfc_name NodeName;
- struct lpfc_name PortName;
- struct lpfc_name FabricName;
- uint8_t FC4Types[32];
- uint8_t Manufacturer[64];
- uint8_t SerialNumber[64];
- uint8_t Model[256];
- uint8_t ModelDescription[256];
- uint8_t HardwareVersion[256];
- uint8_t DriverVersion[256];
- uint8_t OptionROMVersion[256];
- uint8_t FirmwareVersion[256];
- uint8_t OsHostName[256];
- uint8_t NodeSymName[256];
- uint8_t OsDeviceName[256];
- uint8_t OsNameVersion[256];
- uint8_t HostName[256];
+ uint32_t AttrInt;
+ uint8_t AttrTypes[32];
+ uint8_t AttrString[256];
+ struct lpfc_name AttrWWN;
} un;
};
@@ -1327,6 +1319,8 @@ struct lpfc_fdmi_reg_portattr {
#define SLI_MGMT_DPRT 0x310 /* De-register Port */
#define SLI_MGMT_DPA 0x311 /* De-register Port attributes */
+#define LPFC_FDMI_MAX_RETRY 3 /* Max retries for a FDMI command */
+
/*
* HBA Attribute Types
*/
@@ -1342,6 +1336,39 @@ struct lpfc_fdmi_reg_portattr {
#define RHBA_OS_NAME_VERSION 0xa /* 4 to 256 byte ASCII string */
#define RHBA_MAX_CT_PAYLOAD_LEN 0xb /* 32-bit unsigned int */
#define RHBA_SYM_NODENAME 0xc /* 4 to 256 byte ASCII string */
+#define RHBA_VENDOR_INFO 0xd /* 32-bit unsigned int */
+#define RHBA_NUM_PORTS 0xe /* 32-bit unsigned int */
+#define RHBA_FABRIC_WWNN 0xf /* 8 byte WWNN */
+#define RHBA_BIOS_VERSION 0x10 /* 4 to 256 byte ASCII string */
+#define RHBA_BIOS_STATE 0x11 /* 32-bit unsigned int */
+#define RHBA_VENDOR_ID 0xe0 /* 8 byte ASCII string */
+
+/* Bit mask for all individual HBA attributes */
+#define LPFC_FDMI_HBA_ATTR_wwnn 0x00000001
+#define LPFC_FDMI_HBA_ATTR_manufacturer 0x00000002
+#define LPFC_FDMI_HBA_ATTR_sn 0x00000004
+#define LPFC_FDMI_HBA_ATTR_model 0x00000008
+#define LPFC_FDMI_HBA_ATTR_description 0x00000010
+#define LPFC_FDMI_HBA_ATTR_hdw_ver 0x00000020
+#define LPFC_FDMI_HBA_ATTR_drvr_ver 0x00000040
+#define LPFC_FDMI_HBA_ATTR_rom_ver 0x00000080
+#define LPFC_FDMI_HBA_ATTR_fmw_ver 0x00000100
+#define LPFC_FDMI_HBA_ATTR_os_ver 0x00000200
+#define LPFC_FDMI_HBA_ATTR_ct_len 0x00000400
+#define LPFC_FDMI_HBA_ATTR_symbolic_name 0x00000800
+#define LPFC_FDMI_HBA_ATTR_vendor_info 0x00001000 /* Not used */
+#define LPFC_FDMI_HBA_ATTR_num_ports 0x00002000
+#define LPFC_FDMI_HBA_ATTR_fabric_wwnn 0x00004000
+#define LPFC_FDMI_HBA_ATTR_bios_ver 0x00008000
+#define LPFC_FDMI_HBA_ATTR_bios_state 0x00010000 /* Not used */
+#define LPFC_FDMI_HBA_ATTR_vendor_id 0x00020000
+
+/* Bit mask for FDMI-1 defined HBA attributes */
+#define LPFC_FDMI1_HBA_ATTR 0x000007ff
+
+/* Bit mask for FDMI-2 defined HBA attributes */
+/* Skip vendor_info and bios_state */
+#define LPFC_FDMI2_HBA_ATTR 0x0002efff
/*
* Port Attrubute Types
@@ -1353,15 +1380,65 @@ struct lpfc_fdmi_reg_portattr {
#define RPRT_OS_DEVICE_NAME 0x5 /* 4 to 256 byte ASCII string */
#define RPRT_HOST_NAME 0x6 /* 4 to 256 byte ASCII string */
#define RPRT_NODENAME 0x7 /* 8 byte WWNN */
-#define RPRT_PORTNAME 0x8 /* 8 byte WWNN */
+#define RPRT_PORTNAME 0x8 /* 8 byte WWPN */
#define RPRT_SYM_PORTNAME 0x9 /* 4 to 256 byte ASCII string */
#define RPRT_PORT_TYPE 0xa /* 32-bit unsigned int */
#define RPRT_SUPPORTED_CLASS 0xb /* 32-bit unsigned int */
-#define RPRT_FABRICNAME 0xc /* 8 byte Fabric WWNN */
+#define RPRT_FABRICNAME 0xc /* 8 byte Fabric WWPN */
#define RPRT_ACTIVE_FC4_TYPES 0xd /* 32 byte binary array */
#define RPRT_PORT_STATE 0x101 /* 32-bit unsigned int */
#define RPRT_DISC_PORT 0x102 /* 32-bit unsigned int */
#define RPRT_PORT_ID 0x103 /* 32-bit unsigned int */
+#define RPRT_SMART_SERVICE 0xf100 /* 4 to 256 byte ASCII string */
+#define RPRT_SMART_GUID 0xf101 /* 8 byte WWNN + 8 byte WWPN */
+#define RPRT_SMART_VERSION 0xf102 /* 4 to 256 byte ASCII string */
+#define RPRT_SMART_MODEL 0xf103 /* 4 to 256 byte ASCII string */
+#define RPRT_SMART_PORT_INFO 0xf104 /* 32-bit unsigned int */
+#define RPRT_SMART_QOS 0xf105 /* 32-bit unsigned int */
+#define RPRT_SMART_SECURITY 0xf106 /* 32-bit unsigned int */
+
+/* Bit mask for all individual PORT attributes */
+#define LPFC_FDMI_PORT_ATTR_fc4type 0x00000001
+#define LPFC_FDMI_PORT_ATTR_support_speed 0x00000002
+#define LPFC_FDMI_PORT_ATTR_speed 0x00000004
+#define LPFC_FDMI_PORT_ATTR_max_frame 0x00000008
+#define LPFC_FDMI_PORT_ATTR_os_devname 0x00000010
+#define LPFC_FDMI_PORT_ATTR_host_name 0x00000020
+#define LPFC_FDMI_PORT_ATTR_wwnn 0x00000040
+#define LPFC_FDMI_PORT_ATTR_wwpn 0x00000080
+#define LPFC_FDMI_PORT_ATTR_symbolic_name 0x00000100
+#define LPFC_FDMI_PORT_ATTR_port_type 0x00000200
+#define LPFC_FDMI_PORT_ATTR_class 0x00000400
+#define LPFC_FDMI_PORT_ATTR_fabric_wwpn 0x00000800
+#define LPFC_FDMI_PORT_ATTR_port_state 0x00001000
+#define LPFC_FDMI_PORT_ATTR_active_fc4type 0x00002000
+#define LPFC_FDMI_PORT_ATTR_num_disc 0x00004000
+#define LPFC_FDMI_PORT_ATTR_nportid 0x00008000
+#define LPFC_FDMI_SMART_ATTR_service 0x00010000 /* Vendor specific */
+#define LPFC_FDMI_SMART_ATTR_guid 0x00020000 /* Vendor specific */
+#define LPFC_FDMI_SMART_ATTR_version 0x00040000 /* Vendor specific */
+#define LPFC_FDMI_SMART_ATTR_model 0x00080000 /* Vendor specific */
+#define LPFC_FDMI_SMART_ATTR_port_info 0x00100000 /* Vendor specific */
+#define LPFC_FDMI_SMART_ATTR_qos 0x00200000 /* Vendor specific */
+#define LPFC_FDMI_SMART_ATTR_security 0x00400000 /* Vendor specific */
+
+/* Bit mask for FDMI-1 defined PORT attributes */
+#define LPFC_FDMI1_PORT_ATTR 0x0000003f
+
+/* Bit mask for FDMI-2 defined PORT attributes */
+#define LPFC_FDMI2_PORT_ATTR 0x0000ffff
+
+/* Bit mask for Smart SAN defined PORT attributes */
+#define LPFC_FDMI2_SMART_ATTR 0x007fffff
+
+/* Defines for PORT port state attribute */
+#define LPFC_FDMI_PORTSTATE_UNKNOWN 1
+#define LPFC_FDMI_PORTSTATE_ONLINE 2
+
+/* Defines for PORT port type attribute */
+#define LPFC_FDMI_PORTTYPE_UNKNOWN 0
+#define LPFC_FDMI_PORTTYPE_NPORT 1
+#define LPFC_FDMI_PORTTYPE_NLPORT 2
/*
* Begin HBA configuration parameters.
@@ -2498,10 +2575,38 @@ typedef struct {
/* Structure for MB Command READ_LINK_STAT (18) */
typedef struct {
- uint32_t rsvd1;
+ uint32_t word0;
+
+#define lpfc_read_link_stat_rec_SHIFT 0
+#define lpfc_read_link_stat_rec_MASK 0x1
+#define lpfc_read_link_stat_rec_WORD word0
+
+#define lpfc_read_link_stat_gec_SHIFT 1
+#define lpfc_read_link_stat_gec_MASK 0x1
+#define lpfc_read_link_stat_gec_WORD word0
+
+#define lpfc_read_link_stat_w02oftow23of_SHIFT 2
+#define lpfc_read_link_stat_w02oftow23of_MASK 0x3FFFFF
+#define lpfc_read_link_stat_w02oftow23of_WORD word0
+
+#define lpfc_read_link_stat_rsvd_SHIFT 24
+#define lpfc_read_link_stat_rsvd_MASK 0x1F
+#define lpfc_read_link_stat_rsvd_WORD word0
+
+#define lpfc_read_link_stat_gec2_SHIFT 29
+#define lpfc_read_link_stat_gec2_MASK 0x1
+#define lpfc_read_link_stat_gec2_WORD word0
+
+#define lpfc_read_link_stat_clrc_SHIFT 30
+#define lpfc_read_link_stat_clrc_MASK 0x1
+#define lpfc_read_link_stat_clrc_WORD word0
+
+#define lpfc_read_link_stat_clof_SHIFT 31
+#define lpfc_read_link_stat_clof_MASK 0x1
+#define lpfc_read_link_stat_clof_WORD word0
+
uint32_t linkFailureCnt;
uint32_t lossSyncCnt;
-
uint32_t lossSignalCnt;
uint32_t primSeqErrCnt;
uint32_t invalidXmitWord;
@@ -2509,6 +2614,19 @@ typedef struct {
uint32_t primSeqTimeout;
uint32_t elasticOverrun;
uint32_t arbTimeout;
+ uint32_t advRecBufCredit;
+ uint32_t curRecBufCredit;
+ uint32_t advTransBufCredit;
+ uint32_t curTransBufCredit;
+ uint32_t recEofCount;
+ uint32_t recEofdtiCount;
+ uint32_t recEofniCount;
+ uint32_t recSofcount;
+ uint32_t rsvd1;
+ uint32_t rsvd2;
+ uint32_t recDrpXriCount;
+ uint32_t fecCorrBlkCount;
+ uint32_t fecUncorrBlkCount;
} READ_LNK_VAR;
/* Structure for MB Command REG_LOGIN (19) */
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index 33ec4fa39ccb..608f9415fb08 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -3317,6 +3317,7 @@ struct lpfc_acqe_link {
#define LPFC_ASYNC_LINK_SPEED_20GBPS 0x5
#define LPFC_ASYNC_LINK_SPEED_25GBPS 0x6
#define LPFC_ASYNC_LINK_SPEED_40GBPS 0x7
+#define LPFC_ASYNC_LINK_SPEED_100GBPS 0x8
#define lpfc_acqe_link_duplex_SHIFT 16
#define lpfc_acqe_link_duplex_MASK 0x000000FF
#define lpfc_acqe_link_duplex_WORD word0
@@ -3447,23 +3448,50 @@ struct lpfc_acqe_fc_la {
struct lpfc_acqe_misconfigured_event {
struct {
uint32_t word0;
-#define lpfc_sli_misconfigured_port0_SHIFT 0
-#define lpfc_sli_misconfigured_port0_MASK 0x000000FF
-#define lpfc_sli_misconfigured_port0_WORD word0
-#define lpfc_sli_misconfigured_port1_SHIFT 8
-#define lpfc_sli_misconfigured_port1_MASK 0x000000FF
-#define lpfc_sli_misconfigured_port1_WORD word0
-#define lpfc_sli_misconfigured_port2_SHIFT 16
-#define lpfc_sli_misconfigured_port2_MASK 0x000000FF
-#define lpfc_sli_misconfigured_port2_WORD word0
-#define lpfc_sli_misconfigured_port3_SHIFT 24
-#define lpfc_sli_misconfigured_port3_MASK 0x000000FF
-#define lpfc_sli_misconfigured_port3_WORD word0
+#define lpfc_sli_misconfigured_port0_state_SHIFT 0
+#define lpfc_sli_misconfigured_port0_state_MASK 0x000000FF
+#define lpfc_sli_misconfigured_port0_state_WORD word0
+#define lpfc_sli_misconfigured_port1_state_SHIFT 8
+#define lpfc_sli_misconfigured_port1_state_MASK 0x000000FF
+#define lpfc_sli_misconfigured_port1_state_WORD word0
+#define lpfc_sli_misconfigured_port2_state_SHIFT 16
+#define lpfc_sli_misconfigured_port2_state_MASK 0x000000FF
+#define lpfc_sli_misconfigured_port2_state_WORD word0
+#define lpfc_sli_misconfigured_port3_state_SHIFT 24
+#define lpfc_sli_misconfigured_port3_state_MASK 0x000000FF
+#define lpfc_sli_misconfigured_port3_state_WORD word0
+ uint32_t word1;
+#define lpfc_sli_misconfigured_port0_op_SHIFT 0
+#define lpfc_sli_misconfigured_port0_op_MASK 0x00000001
+#define lpfc_sli_misconfigured_port0_op_WORD word1
+#define lpfc_sli_misconfigured_port0_severity_SHIFT 1
+#define lpfc_sli_misconfigured_port0_severity_MASK 0x00000003
+#define lpfc_sli_misconfigured_port0_severity_WORD word1
+#define lpfc_sli_misconfigured_port1_op_SHIFT 8
+#define lpfc_sli_misconfigured_port1_op_MASK 0x00000001
+#define lpfc_sli_misconfigured_port1_op_WORD word1
+#define lpfc_sli_misconfigured_port1_severity_SHIFT 9
+#define lpfc_sli_misconfigured_port1_severity_MASK 0x00000003
+#define lpfc_sli_misconfigured_port1_severity_WORD word1
+#define lpfc_sli_misconfigured_port2_op_SHIFT 16
+#define lpfc_sli_misconfigured_port2_op_MASK 0x00000001
+#define lpfc_sli_misconfigured_port2_op_WORD word1
+#define lpfc_sli_misconfigured_port2_severity_SHIFT 17
+#define lpfc_sli_misconfigured_port2_severity_MASK 0x00000003
+#define lpfc_sli_misconfigured_port2_severity_WORD word1
+#define lpfc_sli_misconfigured_port3_op_SHIFT 24
+#define lpfc_sli_misconfigured_port3_op_MASK 0x00000001
+#define lpfc_sli_misconfigured_port3_op_WORD word1
+#define lpfc_sli_misconfigured_port3_severity_SHIFT 25
+#define lpfc_sli_misconfigured_port3_severity_MASK 0x00000003
+#define lpfc_sli_misconfigured_port3_severity_WORD word1
} theEvent;
#define LPFC_SLI_EVENT_STATUS_VALID 0x00
#define LPFC_SLI_EVENT_STATUS_NOT_PRESENT 0x01
#define LPFC_SLI_EVENT_STATUS_WRONG_TYPE 0x02
#define LPFC_SLI_EVENT_STATUS_UNSUPPORTED 0x03
+#define LPFC_SLI_EVENT_STATUS_UNQUALIFIED 0x04
+#define LPFC_SLI_EVENT_STATUS_UNCERTIFIED 0x05
};
struct lpfc_acqe_sli {
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index db9446c612da..a544366a367e 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1184,8 +1184,10 @@ lpfc_hb_timeout_handler(struct lpfc_hba *phba)
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
- for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++)
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
lpfc_rcv_seq_check_edtov(vports[i]);
+ lpfc_fdmi_num_disc_check(vports[i]);
+ }
lpfc_destroy_vport_work_array(phba, vports);
if ((phba->link_state == LPFC_HBA_ERROR) ||
@@ -1290,6 +1292,10 @@ lpfc_hb_timeout_handler(struct lpfc_hba *phba)
jiffies +
msecs_to_jiffies(1000 * LPFC_HB_MBOX_TIMEOUT));
}
+ } else {
+ mod_timer(&phba->hb_tmofunc,
+ jiffies +
+ msecs_to_jiffies(1000 * LPFC_HB_MBOX_INTERVAL));
}
}
@@ -2621,7 +2627,6 @@ void
lpfc_stop_vport_timers(struct lpfc_vport *vport)
{
del_timer_sync(&vport->els_tmofunc);
- del_timer_sync(&vport->fc_fdmitmo);
del_timer_sync(&vport->delayed_disc_tmo);
lpfc_can_disctmo(vport);
return;
@@ -3340,10 +3345,6 @@ lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev)
vport->fc_disctmo.function = lpfc_disc_timeout;
vport->fc_disctmo.data = (unsigned long)vport;
- init_timer(&vport->fc_fdmitmo);
- vport->fc_fdmitmo.function = lpfc_fdmi_tmo;
- vport->fc_fdmitmo.data = (unsigned long)vport;
-
init_timer(&vport->els_tmofunc);
vport->els_tmofunc.function = lpfc_els_timeout;
vport->els_tmofunc.data = (unsigned long)vport;
@@ -3709,49 +3710,6 @@ lpfc_sli4_parse_latt_type(struct lpfc_hba *phba,
}
/**
- * lpfc_sli4_parse_latt_link_speed - Parse sli4 link-attention link speed
- * @phba: pointer to lpfc hba data structure.
- * @acqe_link: pointer to the async link completion queue entry.
- *
- * This routine is to parse the SLI4 link-attention link speed and translate
- * it into the base driver's link-attention link speed coding.
- *
- * Return: Link-attention link speed in terms of base driver's coding.
- **/
-static uint8_t
-lpfc_sli4_parse_latt_link_speed(struct lpfc_hba *phba,
- struct lpfc_acqe_link *acqe_link)
-{
- uint8_t link_speed;
-
- switch (bf_get(lpfc_acqe_link_speed, acqe_link)) {
- case LPFC_ASYNC_LINK_SPEED_ZERO:
- case LPFC_ASYNC_LINK_SPEED_10MBPS:
- case LPFC_ASYNC_LINK_SPEED_100MBPS:
- link_speed = LPFC_LINK_SPEED_UNKNOWN;
- break;
- case LPFC_ASYNC_LINK_SPEED_1GBPS:
- link_speed = LPFC_LINK_SPEED_1GHZ;
- break;
- case LPFC_ASYNC_LINK_SPEED_10GBPS:
- link_speed = LPFC_LINK_SPEED_10GHZ;
- break;
- case LPFC_ASYNC_LINK_SPEED_20GBPS:
- case LPFC_ASYNC_LINK_SPEED_25GBPS:
- case LPFC_ASYNC_LINK_SPEED_40GBPS:
- link_speed = LPFC_LINK_SPEED_UNKNOWN;
- break;
- default:
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0483 Invalid link-attention link speed: x%x\n",
- bf_get(lpfc_acqe_link_speed, acqe_link));
- link_speed = LPFC_LINK_SPEED_UNKNOWN;
- break;
- }
- return link_speed;
-}
-
-/**
* lpfc_sli_port_speed_get - Get sli3 link speed code to link speed
* @phba: pointer to lpfc hba data structure.
*
@@ -3767,27 +3725,35 @@ lpfc_sli_port_speed_get(struct lpfc_hba *phba)
if (!lpfc_is_link_up(phba))
return 0;
- switch (phba->fc_linkspeed) {
- case LPFC_LINK_SPEED_1GHZ:
- link_speed = 1000;
- break;
- case LPFC_LINK_SPEED_2GHZ:
- link_speed = 2000;
- break;
- case LPFC_LINK_SPEED_4GHZ:
- link_speed = 4000;
- break;
- case LPFC_LINK_SPEED_8GHZ:
- link_speed = 8000;
- break;
- case LPFC_LINK_SPEED_10GHZ:
- link_speed = 10000;
- break;
- case LPFC_LINK_SPEED_16GHZ:
- link_speed = 16000;
- break;
- default:
- link_speed = 0;
+ if (phba->sli_rev <= LPFC_SLI_REV3) {
+ switch (phba->fc_linkspeed) {
+ case LPFC_LINK_SPEED_1GHZ:
+ link_speed = 1000;
+ break;
+ case LPFC_LINK_SPEED_2GHZ:
+ link_speed = 2000;
+ break;
+ case LPFC_LINK_SPEED_4GHZ:
+ link_speed = 4000;
+ break;
+ case LPFC_LINK_SPEED_8GHZ:
+ link_speed = 8000;
+ break;
+ case LPFC_LINK_SPEED_10GHZ:
+ link_speed = 10000;
+ break;
+ case LPFC_LINK_SPEED_16GHZ:
+ link_speed = 16000;
+ break;
+ default:
+ link_speed = 0;
+ }
+ } else {
+ if (phba->sli4_hba.link_state.logical_speed)
+ link_speed =
+ phba->sli4_hba.link_state.logical_speed;
+ else
+ link_speed = phba->sli4_hba.link_state.speed;
}
return link_speed;
}
@@ -3983,7 +3949,7 @@ lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
la->eventTag = acqe_link->event_tag;
bf_set(lpfc_mbx_read_top_att_type, la, att_type);
bf_set(lpfc_mbx_read_top_link_spd, la,
- lpfc_sli4_parse_latt_link_speed(phba, acqe_link));
+ (bf_get(lpfc_acqe_link_speed, acqe_link)));
/* Fake the the following irrelvant fields */
bf_set(lpfc_mbx_read_top_topology, la, LPFC_TOPOLOGY_PT_PT);
@@ -4113,22 +4079,18 @@ lpfc_sli4_async_sli_evt(struct lpfc_hba *phba, struct lpfc_acqe_sli *acqe_sli)
char message[128];
uint8_t status;
uint8_t evt_type;
+ uint8_t operational = 0;
struct temp_event temp_event_data;
struct lpfc_acqe_misconfigured_event *misconfigured;
struct Scsi_Host *shost;
evt_type = bf_get(lpfc_trailer_type, acqe_sli);
- /* Special case Lancer */
- if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
- LPFC_SLI_INTF_IF_TYPE_2) {
- lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
- "2901 Async SLI event - Event Data1:x%08x Event Data2:"
- "x%08x SLI Event Type:%d\n",
- acqe_sli->event_data1, acqe_sli->event_data2,
- evt_type);
- return;
- }
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "2901 Async SLI event - Event Data1:x%08x Event Data2:"
+ "x%08x SLI Event Type:%d\n",
+ acqe_sli->event_data1, acqe_sli->event_data2,
+ evt_type);
port_name = phba->Port[0];
if (port_name == 0x00)
@@ -4174,29 +4136,46 @@ lpfc_sli4_async_sli_evt(struct lpfc_hba *phba, struct lpfc_acqe_sli *acqe_sli)
/* fetch the status for this port */
switch (phba->sli4_hba.lnk_info.lnk_no) {
case LPFC_LINK_NUMBER_0:
- status = bf_get(lpfc_sli_misconfigured_port0,
+ status = bf_get(lpfc_sli_misconfigured_port0_state,
+ &misconfigured->theEvent);
+ operational = bf_get(lpfc_sli_misconfigured_port0_op,
&misconfigured->theEvent);
break;
case LPFC_LINK_NUMBER_1:
- status = bf_get(lpfc_sli_misconfigured_port1,
+ status = bf_get(lpfc_sli_misconfigured_port1_state,
+ &misconfigured->theEvent);
+ operational = bf_get(lpfc_sli_misconfigured_port1_op,
&misconfigured->theEvent);
break;
case LPFC_LINK_NUMBER_2:
- status = bf_get(lpfc_sli_misconfigured_port2,
+ status = bf_get(lpfc_sli_misconfigured_port2_state,
+ &misconfigured->theEvent);
+ operational = bf_get(lpfc_sli_misconfigured_port2_op,
&misconfigured->theEvent);
break;
case LPFC_LINK_NUMBER_3:
- status = bf_get(lpfc_sli_misconfigured_port3,
+ status = bf_get(lpfc_sli_misconfigured_port3_state,
+ &misconfigured->theEvent);
+ operational = bf_get(lpfc_sli_misconfigured_port3_op,
&misconfigured->theEvent);
break;
default:
- status = ~LPFC_SLI_EVENT_STATUS_VALID;
- break;
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "3296 "
+ "LPFC_SLI_EVENT_TYPE_MISCONFIGURED "
+ "event: Invalid link %d",
+ phba->sli4_hba.lnk_info.lnk_no);
+ return;
}
+ /* Skip if optic state unchanged */
+ if (phba->sli4_hba.lnk_info.optic_state == status)
+ return;
+
switch (status) {
case LPFC_SLI_EVENT_STATUS_VALID:
- return; /* no message if the sfp is okay */
+ sprintf(message, "Physical Link is functional");
+ break;
case LPFC_SLI_EVENT_STATUS_NOT_PRESENT:
sprintf(message, "Optics faulted/incorrectly "
"installed/not installed - Reseat optics, "
@@ -4211,15 +4190,26 @@ lpfc_sli4_async_sli_evt(struct lpfc_hba *phba, struct lpfc_acqe_sli *acqe_sli)
sprintf(message, "Incompatible optics - Replace with "
"compatible optics for card to function.");
break;
+ case LPFC_SLI_EVENT_STATUS_UNQUALIFIED:
+ sprintf(message, "Unqualified optics - Replace with "
+ "Avago optics for Warranty and Technical "
+ "Support - Link is%s operational",
+ (operational) ? "" : " not");
+ break;
+ case LPFC_SLI_EVENT_STATUS_UNCERTIFIED:
+ sprintf(message, "Uncertified optics - Replace with "
+ "Avago-certified optics to enable link "
+ "operation - Link is%s operational",
+ (operational) ? "" : " not");
+ break;
default:
/* firmware is reporting a status we don't know about */
sprintf(message, "Unknown event status x%02x", status);
break;
}
-
+ phba->sli4_hba.lnk_info.optic_state = status;
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
- "3176 Misconfigured Physical Port - "
- "Port Name %c %s\n", port_name, message);
+ "3176 Port Name %c %s\n", port_name, message);
break;
case LPFC_SLI_EVENT_TYPE_REMOTE_DPORT:
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
@@ -5293,6 +5283,9 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
INIT_LIST_HEAD(&phba->sli4_hba.lpfc_vfi_blk_list);
INIT_LIST_HEAD(&phba->lpfc_vpi_blk_list);
+ /* initialize optic_state to 0xFF */
+ phba->sli4_hba.lnk_info.optic_state = 0xff;
+
/* Initialize the driver internal SLI layer lists. */
lpfc_sli_setup(phba);
lpfc_sli_queue_setup(phba);
@@ -6159,6 +6152,20 @@ lpfc_create_shost(struct lpfc_hba *phba)
/* Put reference to SCSI host to driver's device private data */
pci_set_drvdata(phba->pcidev, shost);
+ /*
+ * At this point we are fully registered with PSA. In addition,
+ * any initial discovery should be completed.
+ */
+ vport->load_flag |= FC_ALLOW_FDMI;
+ if (phba->cfg_fdmi_on > LPFC_FDMI_NO_SUPPORT) {
+
+ /* Setup appropriate attribute masks */
+ vport->fdmi_hba_mask = LPFC_FDMI2_HBA_ATTR;
+ if (phba->cfg_fdmi_on == LPFC_FDMI_SMART_SAN)
+ vport->fdmi_port_mask = LPFC_FDMI2_SMART_ATTR;
+ else
+ vport->fdmi_port_mask = LPFC_FDMI2_PORT_ATTR;
+ }
return 0;
}
@@ -8833,9 +8840,12 @@ found:
* already mapped to this phys_id.
*/
if (cpup->irq != LPFC_VECTOR_MAP_EMPTY) {
- chann[saved_chann] =
- cpup->channel_id;
- saved_chann++;
+ if (saved_chann <=
+ LPFC_FCP_IO_CHAN_MAX) {
+ chann[saved_chann] =
+ cpup->channel_id;
+ saved_chann++;
+ }
goto out;
}
diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c
index 3fa65338d3f5..4fb3581d4614 100644
--- a/drivers/scsi/lpfc/lpfc_mem.c
+++ b/drivers/scsi/lpfc/lpfc_mem.c
@@ -231,15 +231,13 @@ lpfc_mem_free(struct lpfc_hba *phba)
if (phba->lpfc_hbq_pool)
pci_pool_destroy(phba->lpfc_hbq_pool);
phba->lpfc_hbq_pool = NULL;
-
- if (phba->rrq_pool)
- mempool_destroy(phba->rrq_pool);
+ mempool_destroy(phba->rrq_pool);
phba->rrq_pool = NULL;
/* Free NLP memory pool */
mempool_destroy(phba->nlp_mem_pool);
phba->nlp_mem_pool = NULL;
- if (phba->sli_rev == LPFC_SLI_REV4 && phba->active_rrq_pool) {
+ if (phba->sli_rev == LPFC_SLI_REV4) {
mempool_destroy(phba->active_rrq_pool);
phba->active_rrq_pool = NULL;
}
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index ed9a2c80c4aa..193733e8c823 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -280,38 +280,12 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
uint32_t *lp;
IOCB_t *icmd;
struct serv_parm *sp;
+ uint32_t ed_tov;
LPFC_MBOXQ_t *mbox;
struct ls_rjt stat;
int rc;
memset(&stat, 0, sizeof (struct ls_rjt));
- if (vport->port_state <= LPFC_FDISC) {
- /* Before responding to PLOGI, check for pt2pt mode.
- * If we are pt2pt, with an outstanding FLOGI, abort
- * the FLOGI and resend it first.
- */
- if (vport->fc_flag & FC_PT2PT) {
- lpfc_els_abort_flogi(phba);
- if (!(vport->fc_flag & FC_PT2PT_PLOGI)) {
- /* If the other side is supposed to initiate
- * the PLOGI anyway, just ACC it now and
- * move on with discovery.
- */
- phba->fc_edtov = FF_DEF_EDTOV;
- phba->fc_ratov = FF_DEF_RATOV;
- /* Start discovery - this should just do
- CLEAR_LA */
- lpfc_disc_start(vport);
- } else
- lpfc_initial_flogi(vport);
- } else {
- stat.un.b.lsRjtRsnCode = LSRJT_LOGICAL_BSY;
- stat.un.b.lsRjtRsnCodeExp = LSEXP_NOTHING_MORE;
- lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb,
- ndlp, NULL);
- return 0;
- }
- }
pcmd = (struct lpfc_dmabuf *) cmdiocb->context2;
lp = (uint32_t *) pcmd->virt;
sp = (struct serv_parm *) ((uint8_t *) lp + sizeof (uint32_t));
@@ -404,30 +378,46 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
/* Check for Nport to NPort pt2pt protocol */
if ((vport->fc_flag & FC_PT2PT) &&
!(vport->fc_flag & FC_PT2PT_PLOGI)) {
-
/* rcv'ed PLOGI decides what our NPortId will be */
vport->fc_myDID = icmd->un.rcvels.parmRo;
- mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
- if (mbox == NULL)
- goto out;
- lpfc_config_link(phba, mbox);
- mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
- mbox->vport = vport;
- rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
- if (rc == MBX_NOT_FINISHED) {
- mempool_free(mbox, phba->mbox_mem_pool);
- goto out;
+
+ ed_tov = be32_to_cpu(sp->cmn.e_d_tov);
+ if (sp->cmn.edtovResolution) {
+ /* E_D_TOV ticks are in nanoseconds */
+ ed_tov = (phba->fc_edtov + 999999) / 1000000;
}
+
/*
- * For SLI4, the VFI/VPI are registered AFTER the
- * Nport with the higher WWPN sends us a PLOGI with
- * our assigned NPortId.
+ * For pt-to-pt, use the larger EDTOV
+ * RATOV = 2 * EDTOV
*/
+ if (ed_tov > phba->fc_edtov)
+ phba->fc_edtov = ed_tov;
+ phba->fc_ratov = (2 * phba->fc_edtov) / 1000;
+
+ memcpy(&phba->fc_fabparam, sp, sizeof(struct serv_parm));
+
+ /* Issue config_link / reg_vfi to account for updated TOV's */
+
if (phba->sli_rev == LPFC_SLI_REV4)
lpfc_issue_reg_vfi(vport);
+ else {
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (mbox == NULL)
+ goto out;
+ lpfc_config_link(phba, mbox);
+ mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+ mbox->vport = vport;
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
+ if (rc == MBX_NOT_FINISHED) {
+ mempool_free(mbox, phba->mbox_mem_pool);
+ goto out;
+ }
+ }
lpfc_can_disctmo(vport);
}
+
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mbox)
goto out;
@@ -1038,7 +1028,9 @@ lpfc_cmpl_plogi_plogi_issue(struct lpfc_vport *vport,
uint32_t *lp;
IOCB_t *irsp;
struct serv_parm *sp;
+ uint32_t ed_tov;
LPFC_MBOXQ_t *mbox;
+ int rc;
cmdiocb = (struct lpfc_iocbq *) arg;
rspiocb = cmdiocb->context_un.rsp_iocb;
@@ -1094,18 +1086,63 @@ lpfc_cmpl_plogi_plogi_issue(struct lpfc_vport *vport,
ndlp->nlp_maxframe =
((sp->cmn.bbRcvSizeMsb & 0x0F) << 8) | sp->cmn.bbRcvSizeLsb;
+ if ((vport->fc_flag & FC_PT2PT) &&
+ (vport->fc_flag & FC_PT2PT_PLOGI)) {
+ ed_tov = be32_to_cpu(sp->cmn.e_d_tov);
+ if (sp->cmn.edtovResolution) {
+ /* E_D_TOV ticks are in nanoseconds */
+ ed_tov = (phba->fc_edtov + 999999) / 1000000;
+ }
+
+ /*
+ * Use the larger EDTOV
+ * RATOV = 2 * EDTOV for pt-to-pt
+ */
+ if (ed_tov > phba->fc_edtov)
+ phba->fc_edtov = ed_tov;
+ phba->fc_ratov = (2 * phba->fc_edtov) / 1000;
+
+ memcpy(&phba->fc_fabparam, sp, sizeof(struct serv_parm));
+
+ /* Issue config_link / reg_vfi to account for updated TOV's */
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ lpfc_issue_reg_vfi(vport);
+ } else {
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+ "0133 PLOGI: no memory "
+ "for config_link "
+ "Data: x%x x%x x%x x%x\n",
+ ndlp->nlp_DID, ndlp->nlp_state,
+ ndlp->nlp_flag, ndlp->nlp_rpi);
+ goto out;
+ }
+
+ lpfc_config_link(phba, mbox);
+
+ mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+ mbox->vport = vport;
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
+ if (rc == MBX_NOT_FINISHED) {
+ mempool_free(mbox, phba->mbox_mem_pool);
+ goto out;
+ }
+ }
+ }
+
+ lpfc_unreg_rpi(vport, ndlp);
+
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mbox) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
- "0133 PLOGI: no memory for reg_login "
- "Data: x%x x%x x%x x%x\n",
- ndlp->nlp_DID, ndlp->nlp_state,
- ndlp->nlp_flag, ndlp->nlp_rpi);
+ "0018 PLOGI: no memory for reg_login "
+ "Data: x%x x%x x%x x%x\n",
+ ndlp->nlp_DID, ndlp->nlp_state,
+ ndlp->nlp_flag, ndlp->nlp_rpi);
goto out;
}
- lpfc_unreg_rpi(vport, ndlp);
-
if (lpfc_reg_rpi(phba, vport->vpi, irsp->un.elsreq64.remoteID,
(uint8_t *) sp, mbox, ndlp->nlp_rpi) == 0) {
switch (ndlp->nlp_DID) {
@@ -2299,6 +2336,9 @@ lpfc_cmpl_reglogin_npr_node(struct lpfc_vport *vport,
if (vport->phba->sli_rev < LPFC_SLI_REV4)
ndlp->nlp_rpi = mb->un.varWords[0];
ndlp->nlp_flag |= NLP_RPI_REGISTERED;
+ if (ndlp->nlp_flag & NLP_LOGO_ACC) {
+ lpfc_unreg_rpi(vport, ndlp);
+ }
} else {
if (ndlp->nlp_flag & NLP_NODEV_REMOVE) {
lpfc_drop_node(vport, ndlp);
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 4679ed4444a7..152b3c8a5428 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -3676,6 +3676,7 @@ static void
lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
struct lpfc_iocbq *rsp_iocb)
{
+ struct lpfc_hba *phba = vport->phba;
struct scsi_cmnd *cmnd = lpfc_cmd->pCmd;
struct fcp_cmnd *fcpcmd = lpfc_cmd->fcp_cmnd;
struct fcp_rsp *fcprsp = lpfc_cmd->fcp_rsp;
@@ -3685,6 +3686,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
uint32_t *lp;
uint32_t host_status = DID_OK;
uint32_t rsplen = 0;
+ uint32_t fcpDl;
uint32_t logit = LOG_FCP | LOG_FCP_ERROR;
@@ -3755,13 +3757,14 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
fcprsp->rspInfo3);
scsi_set_resid(cmnd, 0);
+ fcpDl = be32_to_cpu(fcpcmd->fcpDl);
if (resp_info & RESID_UNDER) {
scsi_set_resid(cmnd, be32_to_cpu(fcprsp->rspResId));
lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP_UNDER,
"9025 FCP Read Underrun, expected %d, "
"residual %d Data: x%x x%x x%x\n",
- be32_to_cpu(fcpcmd->fcpDl),
+ fcpDl,
scsi_get_resid(cmnd), fcpi_parm, cmnd->cmnd[0],
cmnd->underflow);
@@ -3777,7 +3780,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
LOG_FCP | LOG_FCP_ERROR,
"9026 FCP Read Check Error "
"and Underrun Data: x%x x%x x%x x%x\n",
- be32_to_cpu(fcpcmd->fcpDl),
+ fcpDl,
scsi_get_resid(cmnd), fcpi_parm,
cmnd->cmnd[0]);
scsi_set_resid(cmnd, scsi_bufflen(cmnd));
@@ -3812,13 +3815,25 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
* Check SLI validation that all the transfer was actually done
* (fcpi_parm should be zero). Apply check only to reads.
*/
- } else if (fcpi_parm && (cmnd->sc_data_direction == DMA_FROM_DEVICE)) {
+ } else if (fcpi_parm) {
lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP | LOG_FCP_ERROR,
- "9029 FCP Read Check Error Data: "
+ "9029 FCP %s Check Error xri x%x Data: "
"x%x x%x x%x x%x x%x\n",
- be32_to_cpu(fcpcmd->fcpDl),
- be32_to_cpu(fcprsp->rspResId),
+ ((cmnd->sc_data_direction == DMA_FROM_DEVICE) ?
+ "Read" : "Write"),
+ ((phba->sli_rev == LPFC_SLI_REV4) ?
+ lpfc_cmd->cur_iocbq.sli4_xritag :
+ rsp_iocb->iocb.ulpContext),
+ fcpDl, be32_to_cpu(fcprsp->rspResId),
fcpi_parm, cmnd->cmnd[0], scsi_status);
+
+ /* There is some issue with the LPe12000 that causes it
+ * to miscalculate the fcpi_parm and falsely trip this
+ * recovery logic. Detect this case and don't error when true.
+ */
+ if (fcpi_parm > fcpDl)
+ goto out;
+
switch (scsi_status) {
case SAM_STAT_GOOD:
case SAM_STAT_CHECK_CONDITION:
@@ -3908,9 +3923,9 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
uint32_t logit = LOG_FCP;
/* Sanity check on return of outstanding command */
- if (!(lpfc_cmd->pCmd))
- return;
cmd = lpfc_cmd->pCmd;
+ if (!cmd)
+ return;
shost = cmd->device->host;
lpfc_cmd->result = (pIocbOut->iocb.un.ulpWord[4] & IOERR_PARAM_MASK);
@@ -4446,15 +4461,7 @@ lpfc_info(struct Scsi_Host *host)
phba->Port);
}
len = strlen(lpfcinfobuf);
- if (phba->sli_rev <= LPFC_SLI_REV3) {
- link_speed = lpfc_sli_port_speed_get(phba);
- } else {
- if (phba->sli4_hba.link_state.logical_speed)
- link_speed =
- phba->sli4_hba.link_state.logical_speed;
- else
- link_speed = phba->sli4_hba.link_state.speed;
- }
+ link_speed = lpfc_sli_port_speed_get(phba);
if (link_speed != 0)
snprintf(lpfcinfobuf + len, 384-len,
" Logical Link Speed: %d Mbps", link_speed);
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index f9585cdd8933..92dfd6a5178c 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -14842,10 +14842,12 @@ lpfc_fc_frame_add(struct lpfc_vport *vport, struct hbq_dmabuf *dmabuf)
struct lpfc_dmabuf *h_buf;
struct hbq_dmabuf *seq_dmabuf = NULL;
struct hbq_dmabuf *temp_dmabuf = NULL;
+ uint8_t found = 0;
INIT_LIST_HEAD(&dmabuf->dbuf.list);
dmabuf->time_stamp = jiffies;
new_hdr = (struct fc_frame_header *)dmabuf->hbuf.virt;
+
/* Use the hdr_buf to find the sequence that this frame belongs to */
list_for_each_entry(h_buf, &vport->rcv_buffer_list, list) {
temp_hdr = (struct fc_frame_header *)h_buf->virt;
@@ -14885,7 +14887,8 @@ lpfc_fc_frame_add(struct lpfc_vport *vport, struct hbq_dmabuf *dmabuf)
return seq_dmabuf;
}
/* find the correct place in the sequence to insert this frame */
- list_for_each_entry_reverse(d_buf, &seq_dmabuf->dbuf.list, list) {
+ d_buf = list_entry(seq_dmabuf->dbuf.list.prev, typeof(*d_buf), list);
+ while (!found) {
temp_dmabuf = container_of(d_buf, struct hbq_dmabuf, dbuf);
temp_hdr = (struct fc_frame_header *)temp_dmabuf->hbuf.virt;
/*
@@ -14895,9 +14898,17 @@ lpfc_fc_frame_add(struct lpfc_vport *vport, struct hbq_dmabuf *dmabuf)
if (be16_to_cpu(new_hdr->fh_seq_cnt) >
be16_to_cpu(temp_hdr->fh_seq_cnt)) {
list_add(&dmabuf->dbuf.list, &temp_dmabuf->dbuf.list);
- return seq_dmabuf;
+ found = 1;
+ break;
}
+
+ if (&d_buf->list == &seq_dmabuf->dbuf.list)
+ break;
+ d_buf = list_entry(d_buf->list.prev, typeof(*d_buf), list);
}
+
+ if (found)
+ return seq_dmabuf;
return NULL;
}
@@ -16173,7 +16184,7 @@ fail_fcf_read:
}
/**
- * lpfc_check_next_fcf_pri
+ * lpfc_check_next_fcf_pri_level
* phba pointer to the lpfc_hba struct for this port.
* This routine is called from the lpfc_sli4_fcf_rr_next_index_get
* routine when the rr_bmask is empty. The FCF indecies are put into the
@@ -16329,8 +16340,12 @@ next_priority:
if (next_fcf_index < LPFC_SLI4_FCF_TBL_INDX_MAX &&
phba->fcf.fcf_pri[next_fcf_index].fcf_rec.flag &
- LPFC_FCF_FLOGI_FAILED)
+ LPFC_FCF_FLOGI_FAILED) {
+ if (list_is_singular(&phba->fcf.fcf_pri_list))
+ return LPFC_FCOE_FCF_NEXT_NONE;
+
goto next_priority;
+ }
lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
"2845 Get next roundrobin failover FCF (x%x)\n",
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index 1e916e16ce98..cd780c29495a 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -442,6 +442,7 @@ struct lpfc_sli4_lnk_info {
#define LPFC_LNK_GE 0x0 /* FCoE */
#define LPFC_LNK_FC 0x1 /* FC */
uint8_t lnk_no;
+ uint8_t optic_state;
};
#define LPFC_SLI4_HANDLER_CNT (LPFC_FCP_IO_CHAN_MAX+ \
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index ea53aa664759..4dc22562aaf1 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -18,7 +18,7 @@
* included with this package. *
*******************************************************************/
-#define LPFC_DRIVER_VERSION "11.0.0.0."
+#define LPFC_DRIVER_VERSION "11.0.0.10."
#define LPFC_DRIVER_NAME "lpfc"
/* Used for SLI 2/3 */
diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c
index 769012663a8f..b3f85def18cc 100644
--- a/drivers/scsi/lpfc/lpfc_vport.c
+++ b/drivers/scsi/lpfc/lpfc_vport.c
@@ -393,6 +393,14 @@ lpfc_vport_create(struct fc_vport *fc_vport, bool disable)
*(struct lpfc_vport **)fc_vport->dd_data = vport;
vport->fc_vport = fc_vport;
+ /* At this point we are fully registered with SCSI Layer. */
+ vport->load_flag |= FC_ALLOW_FDMI;
+ if (phba->cfg_fdmi_on > LPFC_FDMI_NO_SUPPORT) {
+ /* Setup appropriate attribute masks */
+ vport->fdmi_hba_mask = phba->pport->fdmi_hba_mask;
+ vport->fdmi_port_mask = phba->pport->fdmi_port_mask;
+ }
+
/*
* In SLI4, the vpi must be activated before it can be used
* by the port.
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 11393ebf1a68..83658acddd58 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -2020,8 +2020,10 @@ mpt3sas_base_unmap_resources(struct MPT3SAS_ADAPTER *ioc)
_base_free_irq(ioc);
_base_disable_msix(ioc);
- if (ioc->msix96_vector)
+ if (ioc->msix96_vector) {
kfree(ioc->replyPostRegisterIndex);
+ ioc->replyPostRegisterIndex = NULL;
+ }
if (ioc->chip_phys) {
iounmap(ioc->chip);
diff --git a/drivers/scsi/mvsas/mv_94xx.c b/drivers/scsi/mvsas/mv_94xx.c
index 9270d15ff1a4..f6fc4a705924 100644
--- a/drivers/scsi/mvsas/mv_94xx.c
+++ b/drivers/scsi/mvsas/mv_94xx.c
@@ -330,6 +330,51 @@ static void mvs_94xx_phy_enable(struct mvs_info *mvi, u32 phy_id)
mvs_write_port_vsr_data(mvi, phy_id, tmp & 0xfd7fffff);
}
+static void mvs_94xx_sgpio_init(struct mvs_info *mvi)
+{
+ void __iomem *regs = mvi->regs_ex - 0x10200;
+ u32 tmp;
+
+ tmp = mr32(MVS_HST_CHIP_CONFIG);
+ tmp |= 0x100;
+ mw32(MVS_HST_CHIP_CONFIG, tmp);
+
+ mw32(MVS_SGPIO_CTRL + MVS_SGPIO_HOST_OFFSET * mvi->id,
+ MVS_SGPIO_CTRL_SDOUT_AUTO << MVS_SGPIO_CTRL_SDOUT_SHIFT);
+
+ mw32(MVS_SGPIO_CFG1 + MVS_SGPIO_HOST_OFFSET * mvi->id,
+ 8 << MVS_SGPIO_CFG1_LOWA_SHIFT |
+ 8 << MVS_SGPIO_CFG1_HIA_SHIFT |
+ 4 << MVS_SGPIO_CFG1_LOWB_SHIFT |
+ 4 << MVS_SGPIO_CFG1_HIB_SHIFT |
+ 2 << MVS_SGPIO_CFG1_MAXACTON_SHIFT |
+ 1 << MVS_SGPIO_CFG1_FORCEACTOFF_SHIFT
+ );
+
+ mw32(MVS_SGPIO_CFG2 + MVS_SGPIO_HOST_OFFSET * mvi->id,
+ (300000 / 100) << MVS_SGPIO_CFG2_CLK_SHIFT | /* 100kHz clock */
+ 66 << MVS_SGPIO_CFG2_BLINK_SHIFT /* (66 * 0,121 Hz?)*/
+ );
+
+ mw32(MVS_SGPIO_CFG0 + MVS_SGPIO_HOST_OFFSET * mvi->id,
+ MVS_SGPIO_CFG0_ENABLE |
+ MVS_SGPIO_CFG0_BLINKA |
+ MVS_SGPIO_CFG0_BLINKB |
+ /* 3*4 data bits / PDU */
+ (12 - 1) << MVS_SGPIO_CFG0_AUT_BITLEN_SHIFT
+ );
+
+ mw32(MVS_SGPIO_DCTRL + MVS_SGPIO_HOST_OFFSET * mvi->id,
+ DEFAULT_SGPIO_BITS);
+
+ mw32(MVS_SGPIO_DSRC + MVS_SGPIO_HOST_OFFSET * mvi->id,
+ ((mvi->id * 4) + 3) << (8 * 3) |
+ ((mvi->id * 4) + 2) << (8 * 2) |
+ ((mvi->id * 4) + 1) << (8 * 1) |
+ ((mvi->id * 4) + 0) << (8 * 0));
+
+}
+
static int mvs_94xx_init(struct mvs_info *mvi)
{
void __iomem *regs = mvi->regs;
@@ -533,6 +578,8 @@ static int mvs_94xx_init(struct mvs_info *mvi)
/* Enable SRS interrupt */
mw32(MVS_INT_MASK_SRS_0, 0xFFFF);
+ mvs_94xx_sgpio_init(mvi);
+
return 0;
}
@@ -1005,6 +1052,92 @@ static void mvs_94xx_tune_interrupt(struct mvs_info *mvi, u32 time)
}
+static int mvs_94xx_gpio_write(struct mvs_prv_info *mvs_prv,
+ u8 reg_type, u8 reg_index,
+ u8 reg_count, u8 *write_data)
+{
+ int i;
+
+ switch (reg_type) {
+
+ case SAS_GPIO_REG_TX_GP:
+ if (reg_index == 0)
+ return -EINVAL;
+
+ if (reg_count > 1)
+ return -EINVAL;
+
+ if (reg_count == 0)
+ return 0;
+
+ /* maximum supported bits = hosts * 4 drives * 3 bits */
+ for (i = 0; i < mvs_prv->n_host * 4 * 3; i++) {
+
+ /* select host */
+ struct mvs_info *mvi = mvs_prv->mvi[i/(4*3)];
+
+ void __iomem *regs = mvi->regs_ex - 0x10200;
+
+ int drive = (i/3) & (4-1); /* drive number on host */
+ u32 block = mr32(MVS_SGPIO_DCTRL +
+ MVS_SGPIO_HOST_OFFSET * mvi->id);
+
+
+ /*
+ * if bit is set then create a mask with the first
+ * bit of the drive set in the mask ...
+ */
+ u32 bit = (write_data[i/8] & (1 << (i&(8-1)))) ?
+ 1<<(24-drive*8) : 0;
+
+ /*
+ * ... and then shift it to the right position based
+ * on the led type (activity/id/fail)
+ */
+ switch (i%3) {
+ case 0: /* activity */
+ block &= ~((0x7 << MVS_SGPIO_DCTRL_ACT_SHIFT)
+ << (24-drive*8));
+ /* hardwire activity bit to SOF */
+ block |= LED_BLINKA_SOF << (
+ MVS_SGPIO_DCTRL_ACT_SHIFT +
+ (24-drive*8));
+ break;
+ case 1: /* id */
+ block &= ~((0x3 << MVS_SGPIO_DCTRL_LOC_SHIFT)
+ << (24-drive*8));
+ block |= bit << MVS_SGPIO_DCTRL_LOC_SHIFT;
+ break;
+ case 2: /* fail */
+ block &= ~((0x7 << MVS_SGPIO_DCTRL_ERR_SHIFT)
+ << (24-drive*8));
+ block |= bit << MVS_SGPIO_DCTRL_ERR_SHIFT;
+ break;
+ }
+
+ mw32(MVS_SGPIO_DCTRL + MVS_SGPIO_HOST_OFFSET * mvi->id,
+ block);
+
+ }
+
+ return reg_count;
+
+ case SAS_GPIO_REG_TX:
+ if (reg_index + reg_count > mvs_prv->n_host)
+ return -EINVAL;
+
+ for (i = 0; i < reg_count; i++) {
+ struct mvs_info *mvi = mvs_prv->mvi[i+reg_index];
+ void __iomem *regs = mvi->regs_ex - 0x10200;
+
+ mw32(MVS_SGPIO_DCTRL + MVS_SGPIO_HOST_OFFSET * mvi->id,
+ be32_to_cpu(((u32 *) write_data)[i]));
+ }
+ return reg_count;
+ }
+ return -ENOSYS;
+}
+
const struct mvs_dispatch mvs_94xx_dispatch = {
"mv94xx",
mvs_94xx_init,
@@ -1057,5 +1190,6 @@ const struct mvs_dispatch mvs_94xx_dispatch = {
mvs_94xx_fix_dma,
mvs_94xx_tune_interrupt,
mvs_94xx_non_spec_ncq_error,
+ mvs_94xx_gpio_write,
};
diff --git a/drivers/scsi/mvsas/mv_94xx.h b/drivers/scsi/mvsas/mv_94xx.h
index 14e197497b46..578960803a00 100644
--- a/drivers/scsi/mvsas/mv_94xx.h
+++ b/drivers/scsi/mvsas/mv_94xx.h
@@ -38,6 +38,10 @@ enum VANIR_REVISION_ID {
VANIR_C2_REV = 0xC2,
};
+enum host_registers {
+ MVS_HST_CHIP_CONFIG = 0x10104, /* chip configuration */
+};
+
enum hw_registers {
MVS_GBL_CTL = 0x04, /* global control */
MVS_GBL_INT_STAT = 0x00, /* global irq status */
@@ -239,6 +243,73 @@ struct mvs_prd {
__le32 im_len;
} __attribute__ ((packed));
+enum sgpio_registers {
+ MVS_SGPIO_HOST_OFFSET = 0x100, /* offset between hosts */
+
+ MVS_SGPIO_CFG0 = 0xc200,
+ MVS_SGPIO_CFG0_ENABLE = (1 << 0), /* enable pins */
+ MVS_SGPIO_CFG0_BLINKB = (1 << 1), /* blink generators */
+ MVS_SGPIO_CFG0_BLINKA = (1 << 2),
+ MVS_SGPIO_CFG0_INVSCLK = (1 << 3), /* invert signal? */
+ MVS_SGPIO_CFG0_INVSLOAD = (1 << 4),
+ MVS_SGPIO_CFG0_INVSDOUT = (1 << 5),
+ MVS_SGPIO_CFG0_SLOAD_FALLEDGE = (1 << 6), /* rise/fall edge? */
+ MVS_SGPIO_CFG0_SDOUT_FALLEDGE = (1 << 7),
+ MVS_SGPIO_CFG0_SDIN_RISEEDGE = (1 << 8),
+ MVS_SGPIO_CFG0_MAN_BITLEN_SHIFT = 18, /* bits/frame manual mode */
+ MVS_SGPIO_CFG0_AUT_BITLEN_SHIFT = 24, /* bits/frame auto mode */
+
+ MVS_SGPIO_CFG1 = 0xc204, /* blink timing register */
+ MVS_SGPIO_CFG1_LOWA_SHIFT = 0, /* A off time */
+ MVS_SGPIO_CFG1_HIA_SHIFT = 4, /* A on time */
+ MVS_SGPIO_CFG1_LOWB_SHIFT = 8, /* B off time */
+ MVS_SGPIO_CFG1_HIB_SHIFT = 12, /* B on time */
+ MVS_SGPIO_CFG1_MAXACTON_SHIFT = 16, /* max activity on time */
+
+ /* force activity off time */
+ MVS_SGPIO_CFG1_FORCEACTOFF_SHIFT = 20,
+ /* stretch activity on time */
+ MVS_SGPIO_CFG1_STRCHACTON_SHIFT = 24,
+ /* stretch activiity off time */
+ MVS_SGPIO_CFG1_STRCHACTOFF_SHIFT = 28,
+
+
+ MVS_SGPIO_CFG2 = 0xc208, /* clock speed register */
+ MVS_SGPIO_CFG2_CLK_SHIFT = 0,
+ MVS_SGPIO_CFG2_BLINK_SHIFT = 20,
+
+ MVS_SGPIO_CTRL = 0xc20c, /* SDOUT/SDIN mode control */
+ MVS_SGPIO_CTRL_SDOUT_AUTO = 2,
+ MVS_SGPIO_CTRL_SDOUT_SHIFT = 2,
+
+ MVS_SGPIO_DSRC = 0xc220, /* map ODn bits to drives */
+
+ MVS_SGPIO_DCTRL = 0xc238,
+ MVS_SGPIO_DCTRL_ERR_SHIFT = 0,
+ MVS_SGPIO_DCTRL_LOC_SHIFT = 3,
+ MVS_SGPIO_DCTRL_ACT_SHIFT = 5,
+};
+
+enum sgpio_led_status {
+ LED_OFF = 0,
+ LED_ON = 1,
+ LED_BLINKA = 2,
+ LED_BLINKA_INV = 3,
+ LED_BLINKA_SOF = 4,
+ LED_BLINKA_EOF = 5,
+ LED_BLINKB = 6,
+ LED_BLINKB_INV = 7,
+};
+
+#define DEFAULT_SGPIO_BITS ((LED_BLINKA_SOF << \
+ MVS_SGPIO_DCTRL_ACT_SHIFT) << (8 * 3) | \
+ (LED_BLINKA_SOF << \
+ MVS_SGPIO_DCTRL_ACT_SHIFT) << (8 * 2) | \
+ (LED_BLINKA_SOF << \
+ MVS_SGPIO_DCTRL_ACT_SHIFT) << (8 * 1) | \
+ (LED_BLINKA_SOF << \
+ MVS_SGPIO_DCTRL_ACT_SHIFT) << (8 * 0))
+
/*
* these registers are accessed through port vendor
* specific address/data registers
diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index 675e7fab0796..c7c250519c4b 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -84,6 +84,8 @@ static struct sas_domain_function_template mvs_transport_ops = {
.lldd_port_formed = mvs_port_formed,
.lldd_port_deformed = mvs_port_deformed,
+ .lldd_write_gpio = mvs_gpio_write,
+
};
static void mvs_phy_init(struct mvs_info *mvi, int phy_id)
diff --git a/drivers/scsi/mvsas/mv_sas.c b/drivers/scsi/mvsas/mv_sas.c
index 9c780740fb82..83cd3ea2df41 100644
--- a/drivers/scsi/mvsas/mv_sas.c
+++ b/drivers/scsi/mvsas/mv_sas.c
@@ -737,8 +737,8 @@ static int mvs_task_prep(struct sas_task *task, struct mvs_info *mvi, int is_tmf
mv_dprintk("device %016llx not ready.\n",
SAS_ADDR(dev->sas_addr));
- rc = SAS_PHY_DOWN;
- return rc;
+ rc = SAS_PHY_DOWN;
+ return rc;
}
tei.port = dev->port->lldd_port;
if (tei.port && !tei.port->port_attached && !tmf) {
@@ -2105,3 +2105,16 @@ int mvs_int_rx(struct mvs_info *mvi, bool self_clear)
return 0;
}
+int mvs_gpio_write(struct sas_ha_struct *sha, u8 reg_type, u8 reg_index,
+ u8 reg_count, u8 *write_data)
+{
+ struct mvs_prv_info *mvs_prv = sha->lldd_ha;
+ struct mvs_info *mvi = mvs_prv->mvi[0];
+
+ if (MVS_CHIP_DISP->gpio_write) {
+ return MVS_CHIP_DISP->gpio_write(mvs_prv, reg_type,
+ reg_index, reg_count, write_data);
+ }
+
+ return -ENOSYS;
+}
diff --git a/drivers/scsi/mvsas/mv_sas.h b/drivers/scsi/mvsas/mv_sas.h
index dc409c04747a..f9afd4cdd4c4 100644
--- a/drivers/scsi/mvsas/mv_sas.h
+++ b/drivers/scsi/mvsas/mv_sas.h
@@ -103,6 +103,7 @@ enum dev_reset {
};
struct mvs_info;
+struct mvs_prv_info;
struct mvs_dispatch {
char *name;
@@ -172,6 +173,8 @@ struct mvs_dispatch {
int buf_len, int from, void *prd);
void (*tune_interrupt)(struct mvs_info *mvi, u32 time);
void (*non_spec_ncq_error)(struct mvs_info *mvi);
+ int (*gpio_write)(struct mvs_prv_info *mvs_prv, u8 reg_type,
+ u8 reg_index, u8 reg_count, u8 *write_data);
};
@@ -476,5 +479,7 @@ void mvs_int_port(struct mvs_info *mvi, int phy_no, u32 events);
void mvs_update_phyinfo(struct mvs_info *mvi, int i, int get_st);
int mvs_int_rx(struct mvs_info *mvi, bool self_clear);
struct mvs_device *mvs_find_dev_by_reg_set(struct mvs_info *mvi, u8 reg_set);
+int mvs_gpio_write(struct sas_ha_struct *, u8 reg_type, u8 reg_index,
+ u8 reg_count, u8 *write_data);
#endif
diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c
index 0cccd6033feb..d8a2b5185f56 100644
--- a/drivers/scsi/osd/osd_initiator.c
+++ b/drivers/scsi/osd/osd_initiator.c
@@ -170,10 +170,7 @@ static int _osd_get_print_system_info(struct osd_dev *od,
/* FIXME: Where are the time utilities */
pFirst = get_attrs[a++].val_ptr;
- OSD_INFO("CLOCK [0x%02x%02x%02x%02x%02x%02x]\n",
- ((char *)pFirst)[0], ((char *)pFirst)[1],
- ((char *)pFirst)[2], ((char *)pFirst)[3],
- ((char *)pFirst)[4], ((char *)pFirst)[5]);
+ OSD_INFO("CLOCK [0x%6phN]\n", pFirst);
if (a < nelem) { /* IBM-OSD-SIM bug, Might not have it */
unsigned len = get_attrs[a].len;
diff --git a/drivers/scsi/qla2xxx/Kconfig b/drivers/scsi/qla2xxx/Kconfig
index a0f732b138e4..10aa18ba05fd 100644
--- a/drivers/scsi/qla2xxx/Kconfig
+++ b/drivers/scsi/qla2xxx/Kconfig
@@ -18,9 +18,6 @@ config SCSI_QLA_FC
2322, 6322 ql2322_fw.bin
24xx, 54xx ql2400_fw.bin
25xx ql2500_fw.bin
- 2031 ql2600_fw.bin
- 8031 ql8300_fw.bin
- 27xx ql2700_fw.bin
Upon request, the driver caches the firmware image until
the driver is unloaded.
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index bfa9a64c316b..6be32fdab365 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -5843,6 +5843,3 @@ MODULE_FIRMWARE(FW_FILE_ISP2300);
MODULE_FIRMWARE(FW_FILE_ISP2322);
MODULE_FIRMWARE(FW_FILE_ISP24XX);
MODULE_FIRMWARE(FW_FILE_ISP25XX);
-MODULE_FIRMWARE(FW_FILE_ISP2031);
-MODULE_FIRMWARE(FW_FILE_ISP8031);
-MODULE_FIRMWARE(FW_FILE_ISP27XX);
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index d07fb653f5dc..b1bf42b93fcc 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -782,7 +782,7 @@ void scsi_attach_vpd(struct scsi_device *sdev)
int vpd_len = SCSI_VPD_PG_LEN;
int pg80_supported = 0;
int pg83_supported = 0;
- unsigned char *vpd_buf;
+ unsigned char __rcu *vpd_buf, *orig_vpd_buf = NULL;
if (sdev->skip_vpd_pages)
return;
@@ -828,8 +828,16 @@ retry_pg80:
kfree(vpd_buf);
goto retry_pg80;
}
+ mutex_lock(&sdev->inquiry_mutex);
+ orig_vpd_buf = sdev->vpd_pg80;
sdev->vpd_pg80_len = result;
- sdev->vpd_pg80 = vpd_buf;
+ rcu_assign_pointer(sdev->vpd_pg80, vpd_buf);
+ mutex_unlock(&sdev->inquiry_mutex);
+ synchronize_rcu();
+ if (orig_vpd_buf) {
+ kfree(orig_vpd_buf);
+ orig_vpd_buf = NULL;
+ }
vpd_len = SCSI_VPD_PG_LEN;
}
@@ -849,8 +857,14 @@ retry_pg83:
kfree(vpd_buf);
goto retry_pg83;
}
+ mutex_lock(&sdev->inquiry_mutex);
+ orig_vpd_buf = sdev->vpd_pg83;
sdev->vpd_pg83_len = result;
- sdev->vpd_pg83 = vpd_buf;
+ rcu_assign_pointer(sdev->vpd_pg83, vpd_buf);
+ mutex_unlock(&sdev->inquiry_mutex);
+ synchronize_rcu();
+ if (orig_vpd_buf)
+ kfree(orig_vpd_buf);
}
}
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index d09d60293c27..f3d69a98c725 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -129,7 +129,7 @@ static const char *scsi_debug_version_date = "20141022";
#define DEF_NO_LUN_0 0
#define DEF_NUM_PARTS 0
#define DEF_OPTS 0
-#define DEF_OPT_BLKS 64
+#define DEF_OPT_BLKS 1024
#define DEF_PHYSBLK_EXP 0
#define DEF_PTYPE 0
#define DEF_REMOVABLE false
@@ -679,7 +679,7 @@ static void *fake_store(unsigned long long lba)
static struct sd_dif_tuple *dif_store(sector_t sector)
{
- sector = do_div(sector, sdebug_store_sectors);
+ sector = sector_div(sector, sdebug_store_sectors);
return dif_storep + sector;
}
@@ -2781,7 +2781,7 @@ static unsigned long lba_to_map_index(sector_t lba)
lba += scsi_debug_unmap_granularity -
scsi_debug_unmap_alignment;
}
- do_div(lba, scsi_debug_unmap_granularity);
+ sector_div(lba, scsi_debug_unmap_granularity);
return lba;
}
@@ -4140,7 +4140,7 @@ MODULE_PARM_DESC(no_lun_0, "no LU number 0 (def=0 -> have lun 0)");
MODULE_PARM_DESC(no_uld, "stop ULD (e.g. sd driver) attaching (def=0))");
MODULE_PARM_DESC(num_parts, "number of partitions(def=0)");
MODULE_PARM_DESC(num_tgts, "number of targets per host to simulate(def=1)");
-MODULE_PARM_DESC(opt_blks, "optimal transfer length in block (def=64)");
+MODULE_PARM_DESC(opt_blks, "optimal transfer length in blocks (def=1024)");
MODULE_PARM_DESC(opts, "1->noise, 2->medium_err, 4->timeout, 8->recovered_err... (def=0)");
MODULE_PARM_DESC(physblk_exp, "physical block exponent (def=0)");
MODULE_PARM_DESC(ptype, "SCSI peripheral type(def=0[disk])");
@@ -4847,10 +4847,10 @@ static int __init scsi_debug_init(void)
/* play around with geometry, don't waste too much on track 0 */
sdebug_heads = 8;
sdebug_sectors_per = 32;
- if (scsi_debug_dev_size_mb >= 16)
- sdebug_heads = 32;
- else if (scsi_debug_dev_size_mb >= 256)
+ if (scsi_debug_dev_size_mb >= 256)
sdebug_heads = 64;
+ else if (scsi_debug_dev_size_mb >= 16)
+ sdebug_heads = 32;
sdebug_cylinders_per = (unsigned long)sdebug_capacity /
(sdebug_sectors_per * sdebug_heads);
if (sdebug_cylinders_per >= 1024) {
diff --git a/drivers/scsi/scsi_dh.c b/drivers/scsi/scsi_dh.c
index e7649ed3f667..54d446c9f56e 100644
--- a/drivers/scsi/scsi_dh.c
+++ b/drivers/scsi/scsi_dh.c
@@ -153,76 +153,11 @@ static void scsi_dh_handler_detach(struct scsi_device *sdev)
module_put(sdev->handler->module);
}
-/*
- * Functions for sysfs attribute 'dh_state'
- */
-static ssize_t
-store_dh_state(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct scsi_device *sdev = to_scsi_device(dev);
- struct scsi_device_handler *scsi_dh;
- int err = -EINVAL;
-
- if (sdev->sdev_state == SDEV_CANCEL ||
- sdev->sdev_state == SDEV_DEL)
- return -ENODEV;
-
- if (!sdev->handler) {
- /*
- * Attach to a device handler
- */
- scsi_dh = scsi_dh_lookup(buf);
- if (!scsi_dh)
- return err;
- err = scsi_dh_handler_attach(sdev, scsi_dh);
- } else {
- if (!strncmp(buf, "detach", 6)) {
- /*
- * Detach from a device handler
- */
- sdev_printk(KERN_WARNING, sdev,
- "can't detach handler %s.\n",
- sdev->handler->name);
- err = -EINVAL;
- } else if (!strncmp(buf, "activate", 8)) {
- /*
- * Activate a device handler
- */
- if (sdev->handler->activate)
- err = sdev->handler->activate(sdev, NULL, NULL);
- else
- err = 0;
- }
- }
-
- return err<0?err:count;
-}
-
-static ssize_t
-show_dh_state(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct scsi_device *sdev = to_scsi_device(dev);
-
- if (!sdev->handler)
- return snprintf(buf, 20, "detached\n");
-
- return snprintf(buf, 20, "%s\n", sdev->handler->name);
-}
-
-static struct device_attribute scsi_dh_state_attr =
- __ATTR(dh_state, S_IRUGO | S_IWUSR, show_dh_state,
- store_dh_state);
-
int scsi_dh_add_device(struct scsi_device *sdev)
{
struct scsi_device_handler *devinfo = NULL;
const char *drv;
- int err;
-
- err = device_create_file(&sdev->sdev_gendev, &scsi_dh_state_attr);
- if (err)
- return err;
+ int err = 0;
drv = scsi_dh_find_driver(sdev);
if (drv)
@@ -238,11 +173,6 @@ void scsi_dh_release_device(struct scsi_device *sdev)
scsi_dh_handler_detach(sdev);
}
-void scsi_dh_remove_device(struct scsi_device *sdev)
-{
- device_remove_file(&sdev->sdev_gendev, &scsi_dh_state_attr);
-}
-
/*
* scsi_register_device_handler - register a device handler personality
* module.
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index dd8ad2a44510..fa6b2c4eb7a2 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -23,6 +23,7 @@
#include <linux/scatterlist.h>
#include <linux/blk-mq.h>
#include <linux/ratelimit.h>
+#include <asm/unaligned.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
@@ -3154,3 +3155,190 @@ void sdev_enable_disk_events(struct scsi_device *sdev)
atomic_dec(&sdev->disk_events_disable_depth);
}
EXPORT_SYMBOL(sdev_enable_disk_events);
+
+/**
+ * scsi_vpd_lun_id - return a unique device identification
+ * @sdev: SCSI device
+ * @id: buffer for the identification
+ * @id_len: length of the buffer
+ *
+ * Copies a unique device identification into @id based
+ * on the information in the VPD page 0x83 of the device.
+ * The string will be formatted as a SCSI name string.
+ *
+ * Returns the length of the identification or error on failure.
+ * If the identifier is longer than the supplied buffer the actual
+ * identifier length is returned and the buffer is not zero-padded.
+ */
+int scsi_vpd_lun_id(struct scsi_device *sdev, char *id, size_t id_len)
+{
+ u8 cur_id_type = 0xff;
+ u8 cur_id_size = 0;
+ unsigned char *d, *cur_id_str;
+ unsigned char __rcu *vpd_pg83;
+ int id_size = -EINVAL;
+
+ rcu_read_lock();
+ vpd_pg83 = rcu_dereference(sdev->vpd_pg83);
+ if (!vpd_pg83) {
+ rcu_read_unlock();
+ return -ENXIO;
+ }
+
+ /*
+ * Look for the correct descriptor.
+ * Order of preference for lun descriptor:
+ * - SCSI name string
+ * - NAA IEEE Registered Extended
+ * - EUI-64 based 16-byte
+ * - EUI-64 based 12-byte
+ * - NAA IEEE Registered
+ * - NAA IEEE Extended
+ * as longer descriptors reduce the likelyhood
+ * of identification clashes.
+ */
+
+ /* The id string must be at least 20 bytes + terminating NULL byte */
+ if (id_len < 21) {
+ rcu_read_unlock();
+ return -EINVAL;
+ }
+
+ memset(id, 0, id_len);
+ d = vpd_pg83 + 4;
+ while (d < vpd_pg83 + sdev->vpd_pg83_len) {
+ /* Skip designators not referring to the LUN */
+ if ((d[1] & 0x30) != 0x00)
+ goto next_desig;
+
+ switch (d[1] & 0xf) {
+ case 0x2:
+ /* EUI-64 */
+ if (cur_id_size > d[3])
+ break;
+ /* Prefer NAA IEEE Registered Extended */
+ if (cur_id_type == 0x3 &&
+ cur_id_size == d[3])
+ break;
+ cur_id_size = d[3];
+ cur_id_str = d + 4;
+ cur_id_type = d[1] & 0xf;
+ switch (cur_id_size) {
+ case 8:
+ id_size = snprintf(id, id_len,
+ "eui.%8phN",
+ cur_id_str);
+ break;
+ case 12:
+ id_size = snprintf(id, id_len,
+ "eui.%12phN",
+ cur_id_str);
+ break;
+ case 16:
+ id_size = snprintf(id, id_len,
+ "eui.%16phN",
+ cur_id_str);
+ break;
+ default:
+ cur_id_size = 0;
+ break;
+ }
+ break;
+ case 0x3:
+ /* NAA */
+ if (cur_id_size > d[3])
+ break;
+ cur_id_size = d[3];
+ cur_id_str = d + 4;
+ cur_id_type = d[1] & 0xf;
+ switch (cur_id_size) {
+ case 8:
+ id_size = snprintf(id, id_len,
+ "naa.%8phN",
+ cur_id_str);
+ break;
+ case 16:
+ id_size = snprintf(id, id_len,
+ "naa.%16phN",
+ cur_id_str);
+ break;
+ default:
+ cur_id_size = 0;
+ break;
+ }
+ break;
+ case 0x8:
+ /* SCSI name string */
+ if (cur_id_size + 4 > d[3])
+ break;
+ /* Prefer others for truncated descriptor */
+ if (cur_id_size && d[3] > id_len)
+ break;
+ cur_id_size = id_size = d[3];
+ cur_id_str = d + 4;
+ cur_id_type = d[1] & 0xf;
+ if (cur_id_size >= id_len)
+ cur_id_size = id_len - 1;
+ memcpy(id, cur_id_str, cur_id_size);
+ /* Decrease priority for truncated descriptor */
+ if (cur_id_size != id_size)
+ cur_id_size = 6;
+ break;
+ default:
+ break;
+ }
+next_desig:
+ d += d[3] + 4;
+ }
+ rcu_read_unlock();
+
+ return id_size;
+}
+EXPORT_SYMBOL(scsi_vpd_lun_id);
+
+/*
+ * scsi_vpd_tpg_id - return a target port group identifier
+ * @sdev: SCSI device
+ *
+ * Returns the Target Port Group identifier from the information
+ * froom VPD page 0x83 of the device.
+ *
+ * Returns the identifier or error on failure.
+ */
+int scsi_vpd_tpg_id(struct scsi_device *sdev, int *rel_id)
+{
+ unsigned char *d;
+ unsigned char __rcu *vpd_pg83;
+ int group_id = -EAGAIN, rel_port = -1;
+
+ rcu_read_lock();
+ vpd_pg83 = rcu_dereference(sdev->vpd_pg83);
+ if (!vpd_pg83) {
+ rcu_read_unlock();
+ return -ENXIO;
+ }
+
+ d = sdev->vpd_pg83 + 4;
+ while (d < sdev->vpd_pg83 + sdev->vpd_pg83_len) {
+ switch (d[1] & 0xf) {
+ case 0x4:
+ /* Relative target port */
+ rel_port = get_unaligned_be16(&d[6]);
+ break;
+ case 0x5:
+ /* Target port group */
+ group_id = get_unaligned_be16(&d[6]);
+ break;
+ default:
+ break;
+ }
+ d += d[3] + 4;
+ }
+ rcu_read_unlock();
+
+ if (group_id >= 0 && rel_id && rel_port != -1)
+ *rel_id = rel_port;
+
+ return group_id;
+}
+EXPORT_SYMBOL(scsi_vpd_tpg_id);
diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
index 4d01cdb1b348..27b4d0a6a01d 100644
--- a/drivers/scsi/scsi_priv.h
+++ b/drivers/scsi/scsi_priv.h
@@ -174,12 +174,11 @@ extern struct async_domain scsi_sd_probe_domain;
#ifdef CONFIG_SCSI_DH
int scsi_dh_add_device(struct scsi_device *sdev);
void scsi_dh_release_device(struct scsi_device *sdev);
-void scsi_dh_remove_device(struct scsi_device *sdev);
#else
static inline int scsi_dh_add_device(struct scsi_device *sdev) { return 0; }
static inline void scsi_dh_release_device(struct scsi_device *sdev) { }
-static inline void scsi_dh_remove_device(struct scsi_device *sdev) { }
#endif
+static inline void scsi_dh_remove_device(struct scsi_device *sdev) { }
/*
* internal scsi timeout functions: for use by mid-layer and transport
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 054923e3393c..6a820668d442 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -236,6 +236,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
INIT_LIST_HEAD(&sdev->starved_entry);
INIT_LIST_HEAD(&sdev->event_list);
spin_lock_init(&sdev->list_lock);
+ mutex_init(&sdev->inquiry_mutex);
INIT_WORK(&sdev->event_work, scsi_evt_thread);
INIT_WORK(&sdev->requeue_work, scsi_requeue_run_queue);
@@ -1519,6 +1520,9 @@ EXPORT_SYMBOL(scsi_add_device);
void scsi_rescan_device(struct device *dev)
{
device_lock(dev);
+
+ scsi_attach_vpd(to_scsi_device(dev));
+
if (dev->driver && try_module_get(dev->driver->owner)) {
struct scsi_driver *drv = to_scsi_driver(dev->driver);
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 21930c9ac9cd..4f18a851e2c7 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -17,6 +17,7 @@
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
+#include <scsi/scsi_dh.h>
#include <scsi/scsi_transport.h>
#include <scsi/scsi_driver.h>
@@ -760,11 +761,15 @@ show_vpd_##_page(struct file *filp, struct kobject *kobj, \
{ \
struct device *dev = container_of(kobj, struct device, kobj); \
struct scsi_device *sdev = to_scsi_device(dev); \
+ int ret; \
if (!sdev->vpd_##_page) \
return -EINVAL; \
- return memory_read_from_buffer(buf, count, &off, \
- sdev->vpd_##_page, \
+ rcu_read_lock(); \
+ ret = memory_read_from_buffer(buf, count, &off, \
+ rcu_dereference(sdev->vpd_##_page), \
sdev->vpd_##_page##_len); \
+ rcu_read_unlock(); \
+ return ret; \
} \
static struct bin_attribute dev_attr_vpd_##_page = { \
.attr = {.name = __stringify(vpd_##_page), .mode = S_IRUGO }, \
@@ -901,6 +906,76 @@ static DEVICE_ATTR(queue_depth, S_IRUGO | S_IWUSR, sdev_show_queue_depth,
sdev_store_queue_depth);
static ssize_t
+sdev_show_wwid(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ ssize_t count;
+
+ count = scsi_vpd_lun_id(sdev, buf, PAGE_SIZE);
+ if (count > 0) {
+ buf[count] = '\n';
+ count++;
+ }
+ return count;
+}
+static DEVICE_ATTR(wwid, S_IRUGO, sdev_show_wwid, NULL);
+
+#ifdef CONFIG_SCSI_DH
+static ssize_t
+sdev_show_dh_state(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+
+ if (!sdev->handler)
+ return snprintf(buf, 20, "detached\n");
+
+ return snprintf(buf, 20, "%s\n", sdev->handler->name);
+}
+
+static ssize_t
+sdev_store_dh_state(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ int err = -EINVAL;
+
+ if (sdev->sdev_state == SDEV_CANCEL ||
+ sdev->sdev_state == SDEV_DEL)
+ return -ENODEV;
+
+ if (!sdev->handler) {
+ /*
+ * Attach to a device handler
+ */
+ err = scsi_dh_attach(sdev->request_queue, buf);
+ } else if (!strncmp(buf, "activate", 8)) {
+ /*
+ * Activate a device handler
+ */
+ if (sdev->handler->activate)
+ err = sdev->handler->activate(sdev, NULL, NULL);
+ else
+ err = 0;
+ } else if (!strncmp(buf, "detach", 6)) {
+ /*
+ * Detach from a device handler
+ */
+ sdev_printk(KERN_WARNING, sdev,
+ "can't detach handler %s.\n",
+ sdev->handler->name);
+ err = -EINVAL;
+ }
+
+ return err < 0 ? err : count;
+}
+
+static DEVICE_ATTR(dh_state, S_IRUGO | S_IWUSR, sdev_show_dh_state,
+ sdev_store_dh_state);
+#endif
+
+static ssize_t
sdev_show_queue_ramp_up_period(struct device *dev,
struct device_attribute *attr,
char *buf)
@@ -969,6 +1044,10 @@ static struct attribute *scsi_sdev_attrs[] = {
&dev_attr_modalias.attr,
&dev_attr_queue_depth.attr,
&dev_attr_queue_type.attr,
+ &dev_attr_wwid.attr,
+#ifdef CONFIG_SCSI_DH
+ &dev_attr_dh_state.attr,
+#endif
&dev_attr_queue_ramp_up_period.attr,
REF_EVT(media_change),
REF_EVT(inquiry_change_reported),
@@ -1058,11 +1137,12 @@ int scsi_sysfs_add_sdev(struct scsi_device *sdev)
}
error = scsi_dh_add_device(sdev);
- if (error) {
+ if (error)
+ /*
+ * device_handler is optional, so any error can be ignored
+ */
sdev_printk(KERN_INFO, sdev,
"failed to add device handler: %d\n", error);
- return error;
- }
device_enable_async_suspend(&sdev->sdev_dev);
error = device_add(&sdev->sdev_dev);
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index 24eaaf66af71..8a8822641b26 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -2586,7 +2586,7 @@ fc_rport_final_delete(struct work_struct *work)
transport_remove_device(dev);
device_del(dev);
transport_destroy_device(dev);
- put_device(&shost->shost_gendev); /* for fc_host->rport list */
+ scsi_host_put(shost); /* for fc_host->rport list */
put_device(dev); /* for self-reference */
}
@@ -2650,7 +2650,7 @@ fc_rport_create(struct Scsi_Host *shost, int channel,
else
rport->scsi_target_id = -1;
list_add_tail(&rport->peers, &fc_host->rports);
- get_device(&shost->shost_gendev); /* for fc_host->rport list */
+ scsi_host_get(shost); /* for fc_host->rport list */
spin_unlock_irqrestore(shost->host_lock, flags);
@@ -2685,7 +2685,7 @@ delete_rport:
transport_destroy_device(dev);
spin_lock_irqsave(shost->host_lock, flags);
list_del(&rport->peers);
- put_device(&shost->shost_gendev); /* for fc_host->rport list */
+ scsi_host_put(shost); /* for fc_host->rport list */
spin_unlock_irqrestore(shost->host_lock, flags);
put_device(dev->parent);
kfree(rport);
@@ -3383,7 +3383,7 @@ fc_vport_setup(struct Scsi_Host *shost, int channel, struct device *pdev,
fc_host->npiv_vports_inuse++;
vport->number = fc_host->next_vport_number++;
list_add_tail(&vport->peers, &fc_host->vports);
- get_device(&shost->shost_gendev); /* for fc_host->vport list */
+ scsi_host_get(shost); /* for fc_host->vport list */
spin_unlock_irqrestore(shost->host_lock, flags);
@@ -3441,7 +3441,7 @@ delete_vport:
transport_destroy_device(dev);
spin_lock_irqsave(shost->host_lock, flags);
list_del(&vport->peers);
- put_device(&shost->shost_gendev); /* for fc_host->vport list */
+ scsi_host_put(shost); /* for fc_host->vport list */
fc_host->npiv_vports_inuse--;
spin_unlock_irqrestore(shost->host_lock, flags);
put_device(dev->parent);
@@ -3504,7 +3504,7 @@ fc_vport_terminate(struct fc_vport *vport)
vport->flags |= FC_VPORT_DELETED;
list_del(&vport->peers);
fc_host->npiv_vports_inuse--;
- put_device(&shost->shost_gendev); /* for fc_host->vport list */
+ scsi_host_put(shost); /* for fc_host->vport list */
}
spin_unlock_irqrestore(shost->host_lock, flags);
diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c
index 30d26e345dcc..80520e2f0fa2 100644
--- a/drivers/scsi/scsi_transport_sas.c
+++ b/drivers/scsi/scsi_transport_sas.c
@@ -341,6 +341,22 @@ static int do_sas_phy_delete(struct device *dev, void *data)
}
/**
+ * is_sas_attached - check if device is SAS attached
+ * @sdev: scsi device to check
+ *
+ * returns true if the device is SAS attached
+ */
+int is_sas_attached(struct scsi_device *sdev)
+{
+ struct Scsi_Host *shost = sdev->host;
+
+ return shost->transportt->host_attrs.ac.class ==
+ &sas_host_class.class;
+}
+EXPORT_SYMBOL(is_sas_attached);
+
+
+/**
* sas_remove_children - tear down a devices SAS data structures
* @dev: device belonging to the sas object
*
@@ -367,6 +383,20 @@ void sas_remove_host(struct Scsi_Host *shost)
EXPORT_SYMBOL(sas_remove_host);
/**
+ * sas_get_address - return the SAS address of the device
+ * @sdev: scsi device
+ *
+ * Returns the SAS address of the scsi device
+ */
+u64 sas_get_address(struct scsi_device *sdev)
+{
+ struct sas_end_device *rdev = sas_sdev_to_rdev(sdev);
+
+ return rdev->rphy.identify.sas_address;
+}
+EXPORT_SYMBOL(sas_get_address);
+
+/**
* sas_tlr_supported - checking TLR bit in vpd 0x90
* @sdev: scsi device struct
*
diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c
index 044d06410d4c..53ef1cb6418e 100644
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -34,6 +34,8 @@
#include <scsi/scsi_driver.h>
#include <scsi/scsi_host.h>
+#include <scsi/scsi_transport_sas.h>
+
struct ses_device {
unsigned char *page1;
unsigned char *page1_types;
@@ -579,31 +581,15 @@ static void ses_enclosure_data_process(struct enclosure_device *edev,
static void ses_match_to_enclosure(struct enclosure_device *edev,
struct scsi_device *sdev)
{
- unsigned char *desc;
struct efd efd = {
.addr = 0,
};
ses_enclosure_data_process(edev, to_scsi_device(edev->edev.parent), 0);
- if (!sdev->vpd_pg83_len)
- return;
-
- desc = sdev->vpd_pg83 + 4;
- while (desc < sdev->vpd_pg83 + sdev->vpd_pg83_len) {
- enum scsi_protocol proto = desc[0] >> 4;
- u8 code_set = desc[0] & 0x0f;
- u8 piv = desc[1] & 0x80;
- u8 assoc = (desc[1] & 0x30) >> 4;
- u8 type = desc[1] & 0x0f;
- u8 len = desc[3];
-
- if (piv && code_set == 1 && assoc == 1
- && proto == SCSI_PROTOCOL_SAS && type == 3 && len == 8)
- efd.addr = get_unaligned_be64(&desc[4]);
+ if (is_sas_attached(sdev))
+ efd.addr = sas_get_address(sdev);
- desc += len + 4;
- }
if (efd.addr) {
efd.dev = &sdev->sdev_gendev;
diff --git a/drivers/scsi/st.h b/drivers/scsi/st.h
index b6486b5d8681..8c732c8de015 100644
--- a/drivers/scsi/st.h
+++ b/drivers/scsi/st.h
@@ -148,8 +148,6 @@ struct scsi_tape {
int tape_type;
int long_timeout; /* timeout for commands known to take long time */
- unsigned long max_pfn; /* the maximum page number reachable by the HBA */
-
/* Mode characteristics */
struct st_modedef modes[ST_NBR_MODES];
int current_mode;
diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 3fba42ad9fb8..41c115c230d9 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -41,6 +41,7 @@
#include <scsi/scsi_eh.h>
#include <scsi/scsi_devinfo.h>
#include <scsi/scsi_dbg.h>
+#include <scsi/scsi_transport_fc.h>
/*
* All wire protocol details (storage protocol between the guest and the host)
@@ -92,9 +93,8 @@ enum vstor_packet_operation {
*/
struct hv_fc_wwn_packet {
- bool primary_active;
- u8 reserved1;
- u8 reserved2;
+ u8 primary_active;
+ u8 reserved1[3];
u8 primary_port_wwn[8];
u8 primary_node_wwn[8];
u8 secondary_port_wwn[8];
@@ -164,6 +164,26 @@ static int sense_buffer_size = PRE_WIN8_STORVSC_SENSE_BUFFER_SIZE;
*/
static int vmstor_proto_version;
+#define STORVSC_LOGGING_NONE 0
+#define STORVSC_LOGGING_ERROR 1
+#define STORVSC_LOGGING_WARN 2
+
+static int logging_level = STORVSC_LOGGING_ERROR;
+module_param(logging_level, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(logging_level,
+ "Logging level, 0 - None, 1 - Error (default), 2 - Warning.");
+
+static inline bool do_logging(int level)
+{
+ return logging_level >= level;
+}
+
+#define storvsc_log(dev, level, fmt, ...) \
+do { \
+ if (do_logging(level)) \
+ dev_warn(&(dev)->device, fmt, ##__VA_ARGS__); \
+} while (0)
+
struct vmscsi_win8_extension {
/*
* The following were added in Windows 8
@@ -378,6 +398,9 @@ static int storvsc_timeout = 180;
static int msft_blist_flags = BLIST_TRY_VPD_PAGES;
+#if IS_ENABLED(CONFIG_SCSI_FC_ATTRS)
+static struct scsi_transport_template *fc_transport_template;
+#endif
static void storvsc_on_channel_callback(void *context);
@@ -437,6 +460,11 @@ struct storvsc_device {
/* Used for vsc/vsp channel reset process */
struct storvsc_cmd_request init_request;
struct storvsc_cmd_request reset_request;
+ /*
+ * Currently active port and node names for FC devices.
+ */
+ u64 node_name;
+ u64 port_name;
};
struct hv_host_device {
@@ -676,29 +704,36 @@ static void handle_multichannel_storage(struct hv_device *device, int max_chns)
vmbus_are_subchannels_present(device->channel);
}
-static int storvsc_channel_init(struct hv_device *device)
+static void cache_wwn(struct storvsc_device *stor_device,
+ struct vstor_packet *vstor_packet)
{
- struct storvsc_device *stor_device;
- struct storvsc_cmd_request *request;
- struct vstor_packet *vstor_packet;
- int ret, t, i;
- int max_chns;
- bool process_sub_channels = false;
+ /*
+ * Cache the currently active port and node ww names.
+ */
+ if (vstor_packet->wwn_packet.primary_active) {
+ stor_device->node_name =
+ wwn_to_u64(vstor_packet->wwn_packet.primary_node_wwn);
+ stor_device->port_name =
+ wwn_to_u64(vstor_packet->wwn_packet.primary_port_wwn);
+ } else {
+ stor_device->node_name =
+ wwn_to_u64(vstor_packet->wwn_packet.secondary_node_wwn);
+ stor_device->port_name =
+ wwn_to_u64(vstor_packet->wwn_packet.secondary_port_wwn);
+ }
+}
- stor_device = get_out_stor_device(device);
- if (!stor_device)
- return -ENODEV;
- request = &stor_device->init_request;
+static int storvsc_execute_vstor_op(struct hv_device *device,
+ struct storvsc_cmd_request *request,
+ bool status_check)
+{
+ struct vstor_packet *vstor_packet;
+ int ret, t;
+
vstor_packet = &request->vstor_packet;
- /*
- * Now, initiate the vsc/vsp initialization protocol on the open
- * channel
- */
- memset(request, 0, sizeof(struct storvsc_cmd_request));
init_completion(&request->wait_event);
- vstor_packet->operation = VSTOR_OPERATION_BEGIN_INITIALIZATION;
vstor_packet->flags = REQUEST_COMPLETION_FLAG;
ret = vmbus_sendpacket(device->channel, vstor_packet,
@@ -708,27 +743,56 @@ static int storvsc_channel_init(struct hv_device *device)
VM_PKT_DATA_INBAND,
VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
if (ret != 0)
- goto cleanup;
+ return ret;
t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
- if (t == 0) {
- ret = -ETIMEDOUT;
- goto cleanup;
- }
+ if (t == 0)
+ return -ETIMEDOUT;
+
+ if (!status_check)
+ return ret;
if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
- vstor_packet->status != 0) {
- ret = -EINVAL;
- goto cleanup;
- }
+ vstor_packet->status != 0)
+ return -EINVAL;
+
+ return ret;
+}
+
+static int storvsc_channel_init(struct hv_device *device, bool is_fc)
+{
+ struct storvsc_device *stor_device;
+ struct storvsc_cmd_request *request;
+ struct vstor_packet *vstor_packet;
+ int ret, i;
+ int max_chns;
+ bool process_sub_channels = false;
+ stor_device = get_out_stor_device(device);
+ if (!stor_device)
+ return -ENODEV;
+
+ request = &stor_device->init_request;
+ vstor_packet = &request->vstor_packet;
+
+ /*
+ * Now, initiate the vsc/vsp initialization protocol on the open
+ * channel
+ */
+ memset(request, 0, sizeof(struct storvsc_cmd_request));
+ vstor_packet->operation = VSTOR_OPERATION_BEGIN_INITIALIZATION;
+ ret = storvsc_execute_vstor_op(device, request, true);
+ if (ret)
+ return ret;
+ /*
+ * Query host supported protocol version.
+ */
for (i = 0; i < ARRAY_SIZE(vmstor_protocols); i++) {
/* reuse the packet for version range supported */
memset(vstor_packet, 0, sizeof(struct vstor_packet));
vstor_packet->operation =
VSTOR_OPERATION_QUERY_PROTOCOL_VERSION;
- vstor_packet->flags = REQUEST_COMPLETION_FLAG;
vstor_packet->version.major_minor =
vmstor_protocols[i].protocol_version;
@@ -737,26 +801,12 @@ static int storvsc_channel_init(struct hv_device *device)
* The revision number is only used in Windows; set it to 0.
*/
vstor_packet->version.revision = 0;
-
- ret = vmbus_sendpacket(device->channel, vstor_packet,
- (sizeof(struct vstor_packet) -
- vmscsi_size_delta),
- (unsigned long)request,
- VM_PKT_DATA_INBAND,
- VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
+ ret = storvsc_execute_vstor_op(device, request, false);
if (ret != 0)
- goto cleanup;
+ return ret;
- t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
- if (t == 0) {
- ret = -ETIMEDOUT;
- goto cleanup;
- }
-
- if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO) {
- ret = -EINVAL;
- goto cleanup;
- }
+ if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO)
+ return -EINVAL;
if (vstor_packet->status == 0) {
vmstor_proto_version =
@@ -772,37 +822,15 @@ static int storvsc_channel_init(struct hv_device *device)
}
}
- if (vstor_packet->status != 0) {
- ret = -EINVAL;
- goto cleanup;
- }
+ if (vstor_packet->status != 0)
+ return -EINVAL;
memset(vstor_packet, 0, sizeof(struct vstor_packet));
vstor_packet->operation = VSTOR_OPERATION_QUERY_PROPERTIES;
- vstor_packet->flags = REQUEST_COMPLETION_FLAG;
-
- ret = vmbus_sendpacket(device->channel, vstor_packet,
- (sizeof(struct vstor_packet) -
- vmscsi_size_delta),
- (unsigned long)request,
- VM_PKT_DATA_INBAND,
- VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
-
+ ret = storvsc_execute_vstor_op(device, request, true);
if (ret != 0)
- goto cleanup;
-
- t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
- if (t == 0) {
- ret = -ETIMEDOUT;
- goto cleanup;
- }
-
- if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
- vstor_packet->status != 0) {
- ret = -EINVAL;
- goto cleanup;
- }
+ return ret;
/*
* Check to see if multi-channel support is there.
@@ -818,37 +846,34 @@ static int storvsc_channel_init(struct hv_device *device)
stor_device->max_transfer_bytes =
vstor_packet->storage_channel_properties.max_transfer_bytes;
- memset(vstor_packet, 0, sizeof(struct vstor_packet));
- vstor_packet->operation = VSTOR_OPERATION_END_INITIALIZATION;
- vstor_packet->flags = REQUEST_COMPLETION_FLAG;
-
- ret = vmbus_sendpacket(device->channel, vstor_packet,
- (sizeof(struct vstor_packet) -
- vmscsi_size_delta),
- (unsigned long)request,
- VM_PKT_DATA_INBAND,
- VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
+ if (!is_fc)
+ goto done;
+ /*
+ * For FC devices retrieve FC HBA data.
+ */
+ memset(vstor_packet, 0, sizeof(struct vstor_packet));
+ vstor_packet->operation = VSTOR_OPERATION_FCHBA_DATA;
+ ret = storvsc_execute_vstor_op(device, request, true);
if (ret != 0)
- goto cleanup;
+ return ret;
- t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
- if (t == 0) {
- ret = -ETIMEDOUT;
- goto cleanup;
- }
+ /*
+ * Cache the currently active port and node ww names.
+ */
+ cache_wwn(stor_device, vstor_packet);
- if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
- vstor_packet->status != 0) {
- ret = -EINVAL;
- goto cleanup;
- }
+done:
+
+ memset(vstor_packet, 0, sizeof(struct vstor_packet));
+ vstor_packet->operation = VSTOR_OPERATION_END_INITIALIZATION;
+ ret = storvsc_execute_vstor_op(device, request, true);
+ if (ret != 0)
+ return ret;
if (process_sub_channels)
handle_multichannel_storage(device, max_chns);
-
-cleanup:
return ret;
}
@@ -920,19 +945,16 @@ static void storvsc_handle_error(struct vmscsi_request *vm_srb,
}
-static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request)
+static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request,
+ struct storvsc_device *stor_dev)
{
struct scsi_cmnd *scmnd = cmd_request->cmd;
- struct hv_host_device *host_dev = shost_priv(scmnd->device->host);
struct scsi_sense_hdr sense_hdr;
struct vmscsi_request *vm_srb;
struct Scsi_Host *host;
- struct storvsc_device *stor_dev;
- struct hv_device *dev = host_dev->dev;
u32 payload_sz = cmd_request->payload_sz;
void *payload = cmd_request->payload;
- stor_dev = get_in_stor_device(dev);
host = stor_dev->host;
vm_srb = &cmd_request->vstor_packet.vm_srb;
@@ -941,7 +963,8 @@ static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request)
if (scmnd->result) {
if (scsi_normalize_sense(scmnd->sense_buffer,
- SCSI_SENSE_BUFFERSIZE, &sense_hdr))
+ SCSI_SENSE_BUFFERSIZE, &sense_hdr) &&
+ do_logging(STORVSC_LOGGING_ERROR))
scsi_print_sense_hdr(scmnd->device, "storvsc",
&sense_hdr);
}
@@ -961,14 +984,13 @@ static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request)
kfree(payload);
}
-static void storvsc_on_io_completion(struct hv_device *device,
+static void storvsc_on_io_completion(struct storvsc_device *stor_device,
struct vstor_packet *vstor_packet,
struct storvsc_cmd_request *request)
{
- struct storvsc_device *stor_device;
struct vstor_packet *stor_pkt;
+ struct hv_device *device = stor_device->device;
- stor_device = hv_get_drvdata(device);
stor_pkt = &request->vstor_packet;
/*
@@ -995,6 +1017,13 @@ static void storvsc_on_io_completion(struct hv_device *device,
stor_pkt->vm_srb.sense_info_length =
vstor_packet->vm_srb.sense_info_length;
+ if (vstor_packet->vm_srb.scsi_status != 0 ||
+ vstor_packet->vm_srb.srb_status != SRB_STATUS_SUCCESS)
+ storvsc_log(device, STORVSC_LOGGING_WARN,
+ "cmd 0x%x scsi status 0x%x srb status 0x%x\n",
+ stor_pkt->vm_srb.cdb[0],
+ vstor_packet->vm_srb.scsi_status,
+ vstor_packet->vm_srb.srb_status);
if ((vstor_packet->vm_srb.scsi_status & 0xFF) == 0x02) {
/* CHECK_CONDITION */
@@ -1002,6 +1031,10 @@ static void storvsc_on_io_completion(struct hv_device *device,
SRB_STATUS_AUTOSENSE_VALID) {
/* autosense data available */
+ storvsc_log(device, STORVSC_LOGGING_WARN,
+ "stor pkt %p autosense data valid - len %d\n",
+ request, vstor_packet->vm_srb.sense_info_length);
+
memcpy(request->cmd->sense_buffer,
vstor_packet->vm_srb.sense_data,
vstor_packet->vm_srb.sense_info_length);
@@ -1012,7 +1045,7 @@ static void storvsc_on_io_completion(struct hv_device *device,
stor_pkt->vm_srb.data_transfer_length =
vstor_packet->vm_srb.data_transfer_length;
- storvsc_command_completion(request);
+ storvsc_command_completion(request, stor_device);
if (atomic_dec_and_test(&stor_device->num_outstanding_req) &&
stor_device->drain_notify)
@@ -1021,21 +1054,19 @@ static void storvsc_on_io_completion(struct hv_device *device,
}
-static void storvsc_on_receive(struct hv_device *device,
+static void storvsc_on_receive(struct storvsc_device *stor_device,
struct vstor_packet *vstor_packet,
struct storvsc_cmd_request *request)
{
struct storvsc_scan_work *work;
- struct storvsc_device *stor_device;
switch (vstor_packet->operation) {
case VSTOR_OPERATION_COMPLETE_IO:
- storvsc_on_io_completion(device, vstor_packet, request);
+ storvsc_on_io_completion(stor_device, vstor_packet, request);
break;
case VSTOR_OPERATION_REMOVE_DEVICE:
case VSTOR_OPERATION_ENUMERATE_BUS:
- stor_device = get_in_stor_device(device);
work = kmalloc(sizeof(struct storvsc_scan_work), GFP_ATOMIC);
if (!work)
return;
@@ -1045,6 +1076,13 @@ static void storvsc_on_receive(struct hv_device *device,
schedule_work(&work->work);
break;
+ case VSTOR_OPERATION_FCHBA_DATA:
+ cache_wwn(stor_device, vstor_packet);
+#if IS_ENABLED(CONFIG_SCSI_FC_ATTRS)
+ fc_host_node_name(stor_device->host) = stor_device->node_name;
+ fc_host_port_name(stor_device->host) = stor_device->port_name;
+#endif
+ break;
default:
break;
}
@@ -1088,7 +1126,7 @@ static void storvsc_on_channel_callback(void *context)
vmscsi_size_delta));
complete(&request->wait_event);
} else {
- storvsc_on_receive(device,
+ storvsc_on_receive(stor_device,
(struct vstor_packet *)packet,
request);
}
@@ -1100,7 +1138,8 @@ static void storvsc_on_channel_callback(void *context)
return;
}
-static int storvsc_connect_to_vsp(struct hv_device *device, u32 ring_size)
+static int storvsc_connect_to_vsp(struct hv_device *device, u32 ring_size,
+ bool is_fc)
{
struct vmstorage_channel_properties props;
int ret;
@@ -1117,7 +1156,7 @@ static int storvsc_connect_to_vsp(struct hv_device *device, u32 ring_size)
if (ret != 0)
return ret;
- ret = storvsc_channel_init(device);
+ ret = storvsc_channel_init(device, is_fc);
return ret;
}
@@ -1542,6 +1581,7 @@ static int storvsc_probe(struct hv_device *device,
struct Scsi_Host *host;
struct hv_host_device *host_dev;
bool dev_is_ide = ((dev_id->driver_data == IDE_GUID) ? true : false);
+ bool is_fc = ((dev_id->driver_data == SFC_GUID) ? true : false);
int target = 0;
struct storvsc_device *stor_device;
int max_luns_per_target;
@@ -1599,7 +1639,7 @@ static int storvsc_probe(struct hv_device *device,
hv_set_drvdata(device, stor_device);
stor_device->port_number = host->host_no;
- ret = storvsc_connect_to_vsp(device, storvsc_ringbuffer_size);
+ ret = storvsc_connect_to_vsp(device, storvsc_ringbuffer_size, is_fc);
if (ret)
goto err_out1;
@@ -1611,6 +1651,9 @@ static int storvsc_probe(struct hv_device *device,
host->max_lun = STORVSC_FC_MAX_LUNS_PER_TARGET;
host->max_id = STORVSC_FC_MAX_TARGETS;
host->max_channel = STORVSC_FC_MAX_CHANNELS - 1;
+#if IS_ENABLED(CONFIG_SCSI_FC_ATTRS)
+ host->transportt = fc_transport_template;
+#endif
break;
case SCSI_GUID:
@@ -1650,6 +1693,12 @@ static int storvsc_probe(struct hv_device *device,
goto err_out2;
}
}
+#if IS_ENABLED(CONFIG_SCSI_FC_ATTRS)
+ if (host->transportt == fc_transport_template) {
+ fc_host_node_name(host) = stor_device->node_name;
+ fc_host_port_name(host) = stor_device->port_name;
+ }
+#endif
return 0;
err_out2:
@@ -1675,6 +1724,10 @@ static int storvsc_remove(struct hv_device *dev)
struct storvsc_device *stor_device = hv_get_drvdata(dev);
struct Scsi_Host *host = stor_device->host;
+#if IS_ENABLED(CONFIG_SCSI_FC_ATTRS)
+ if (host->transportt == fc_transport_template)
+ fc_remove_host(host);
+#endif
scsi_remove_host(host);
storvsc_dev_remove(dev);
scsi_host_put(host);
@@ -1689,8 +1742,16 @@ static struct hv_driver storvsc_drv = {
.remove = storvsc_remove,
};
+#if IS_ENABLED(CONFIG_SCSI_FC_ATTRS)
+static struct fc_function_template fc_transport_functions = {
+ .show_host_node_name = 1,
+ .show_host_port_name = 1,
+};
+#endif
+
static int __init storvsc_drv_init(void)
{
+ int ret;
/*
* Divide the ring buffer data size (which is 1 page less
@@ -1705,12 +1766,28 @@ static int __init storvsc_drv_init(void)
vmscsi_size_delta,
sizeof(u64)));
- return vmbus_driver_register(&storvsc_drv);
+#if IS_ENABLED(CONFIG_SCSI_FC_ATTRS)
+ fc_transport_template = fc_attach_transport(&fc_transport_functions);
+ if (!fc_transport_template)
+ return -ENODEV;
+#endif
+
+ ret = vmbus_driver_register(&storvsc_drv);
+
+#if IS_ENABLED(CONFIG_SCSI_FC_ATTRS)
+ if (ret)
+ fc_release_transport(fc_transport_template);
+#endif
+
+ return ret;
}
static void __exit storvsc_drv_exit(void)
{
vmbus_driver_unregister(&storvsc_drv);
+#if IS_ENABLED(CONFIG_SCSI_FC_ATTRS)
+ fc_release_transport(fc_transport_template);
+#endif
}
MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c
index 9714f2a8b329..d2a7b127b05c 100644
--- a/drivers/scsi/ufs/ufshcd-pltfrm.c
+++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
@@ -333,7 +333,7 @@ int ufshcd_pltfrm_init(struct platform_device *pdev,
err = ufshcd_init(hba, mmio_base, irq);
if (err) {
- dev_err(dev, "Intialization failed\n");
+ dev_err(dev, "Initialization failed\n");
goto out_disable_rpm;
}
diff --git a/drivers/scsi/vmw_pvscsi.c b/drivers/scsi/vmw_pvscsi.c
index 0f133c1817de..6164634aff18 100644
--- a/drivers/scsi/vmw_pvscsi.c
+++ b/drivers/scsi/vmw_pvscsi.c
@@ -349,9 +349,9 @@ static void pvscsi_create_sg(struct pvscsi_ctx *ctx,
* Map all data buffers for a command into PCI space and
* setup the scatter/gather list if needed.
*/
-static void pvscsi_map_buffers(struct pvscsi_adapter *adapter,
- struct pvscsi_ctx *ctx, struct scsi_cmnd *cmd,
- struct PVSCSIRingReqDesc *e)
+static int pvscsi_map_buffers(struct pvscsi_adapter *adapter,
+ struct pvscsi_ctx *ctx, struct scsi_cmnd *cmd,
+ struct PVSCSIRingReqDesc *e)
{
unsigned count;
unsigned bufflen = scsi_bufflen(cmd);
@@ -360,18 +360,30 @@ static void pvscsi_map_buffers(struct pvscsi_adapter *adapter,
e->dataLen = bufflen;
e->dataAddr = 0;
if (bufflen == 0)
- return;
+ return 0;
sg = scsi_sglist(cmd);
count = scsi_sg_count(cmd);
if (count != 0) {
int segs = scsi_dma_map(cmd);
- if (segs > 1) {
+
+ if (segs == -ENOMEM) {
+ scmd_printk(KERN_ERR, cmd,
+ "vmw_pvscsi: Failed to map cmd sglist for DMA.\n");
+ return -ENOMEM;
+ } else if (segs > 1) {
pvscsi_create_sg(ctx, sg, segs);
e->flags |= PVSCSI_FLAG_CMD_WITH_SG_LIST;
ctx->sglPA = pci_map_single(adapter->dev, ctx->sgl,
SGL_SIZE, PCI_DMA_TODEVICE);
+ if (pci_dma_mapping_error(adapter->dev, ctx->sglPA)) {
+ scmd_printk(KERN_ERR, cmd,
+ "vmw_pvscsi: Failed to map ctx sglist for DMA.\n");
+ scsi_dma_unmap(cmd);
+ ctx->sglPA = 0;
+ return -ENOMEM;
+ }
e->dataAddr = ctx->sglPA;
} else
e->dataAddr = sg_dma_address(sg);
@@ -382,8 +394,15 @@ static void pvscsi_map_buffers(struct pvscsi_adapter *adapter,
*/
ctx->dataPA = pci_map_single(adapter->dev, sg, bufflen,
cmd->sc_data_direction);
+ if (pci_dma_mapping_error(adapter->dev, ctx->dataPA)) {
+ scmd_printk(KERN_ERR, cmd,
+ "vmw_pvscsi: Failed to map direct data buffer for DMA.\n");
+ return -ENOMEM;
+ }
e->dataAddr = ctx->dataPA;
}
+
+ return 0;
}
static void pvscsi_unmap_buffers(const struct pvscsi_adapter *adapter,
@@ -690,6 +709,12 @@ static int pvscsi_queue_ring(struct pvscsi_adapter *adapter,
ctx->sensePA = pci_map_single(adapter->dev, cmd->sense_buffer,
SCSI_SENSE_BUFFERSIZE,
PCI_DMA_FROMDEVICE);
+ if (pci_dma_mapping_error(adapter->dev, ctx->sensePA)) {
+ scmd_printk(KERN_ERR, cmd,
+ "vmw_pvscsi: Failed to map sense buffer for DMA.\n");
+ ctx->sensePA = 0;
+ return -ENOMEM;
+ }
e->senseAddr = ctx->sensePA;
e->senseLen = SCSI_SENSE_BUFFERSIZE;
} else {
@@ -711,7 +736,15 @@ static int pvscsi_queue_ring(struct pvscsi_adapter *adapter,
else
e->flags = 0;
- pvscsi_map_buffers(adapter, ctx, cmd, e);
+ if (pvscsi_map_buffers(adapter, ctx, cmd, e) != 0) {
+ if (cmd->sense_buffer) {
+ pci_unmap_single(adapter->dev, ctx->sensePA,
+ SCSI_SENSE_BUFFERSIZE,
+ PCI_DMA_FROMDEVICE);
+ ctx->sensePA = 0;
+ }
+ return -ENOMEM;
+ }
e->context = pvscsi_map_context(adapter, ctx);
diff --git a/drivers/scsi/vmw_pvscsi.h b/drivers/scsi/vmw_pvscsi.h
index ee16f0c5c47d..12712c92f37a 100644
--- a/drivers/scsi/vmw_pvscsi.h
+++ b/drivers/scsi/vmw_pvscsi.h
@@ -26,7 +26,7 @@
#include <linux/types.h>
-#define PVSCSI_DRIVER_VERSION_STRING "1.0.5.0-k"
+#define PVSCSI_DRIVER_VERSION_STRING "1.0.6.0-k"
#define PVSCSI_MAX_NUM_SG_ENTRIES_PER_SEGMENT 128
diff --git a/include/scsi/sas.h b/include/scsi/sas.h
index 0d2607d12387..42a84ef42683 100644
--- a/include/scsi/sas.h
+++ b/include/scsi/sas.h
@@ -344,6 +344,43 @@ struct ssp_response_iu {
u8 sense_data[0];
} __attribute__ ((packed));
+struct ssp_command_iu {
+ u8 lun[8];
+ u8 _r_a;
+
+ union {
+ struct {
+ u8 attr:3;
+ u8 prio:4;
+ u8 efb:1;
+ };
+ u8 efb_prio_attr;
+ };
+
+ u8 _r_b;
+
+ u8 _r_c:2;
+ u8 add_cdb_len:6;
+
+ u8 cdb[16];
+ u8 add_cdb[0];
+} __attribute__ ((packed));
+
+struct xfer_rdy_iu {
+ __be32 requested_offset;
+ __be32 write_data_len;
+ __be32 _r_a;
+} __attribute__ ((packed));
+
+struct ssp_tmf_iu {
+ u8 lun[8];
+ u16 _r_a;
+ u8 tmf;
+ u8 _r_b;
+ __be16 tag;
+ u8 _r_c[14];
+} __attribute__ ((packed));
+
/* ---------- SMP ---------- */
struct report_general_resp {
@@ -538,6 +575,43 @@ struct ssp_response_iu {
u8 sense_data[0];
} __attribute__ ((packed));
+struct ssp_command_iu {
+ u8 lun[8];
+ u8 _r_a;
+
+ union {
+ struct {
+ u8 efb:1;
+ u8 prio:4;
+ u8 attr:3;
+ };
+ u8 efb_prio_attr;
+ };
+
+ u8 _r_b;
+
+ u8 add_cdb_len:6;
+ u8 _r_c:2;
+
+ u8 cdb[16];
+ u8 add_cdb[0];
+} __attribute__ ((packed));
+
+struct xfer_rdy_iu {
+ __be32 requested_offset;
+ __be32 write_data_len;
+ __be32 _r_a;
+} __attribute__ ((packed));
+
+struct ssp_tmf_iu {
+ u8 lun[8];
+ u16 _r_a;
+ u8 tmf;
+ u8 _r_b;
+ __be16 tag;
+ u8 _r_c[14];
+} __attribute__ ((packed));
+
/* ---------- SMP ---------- */
struct report_general_resp {
diff --git a/include/scsi/scsi_dbg.h b/include/scsi/scsi_dbg.h
index f8170e90b49d..56710e03101c 100644
--- a/include/scsi/scsi_dbg.h
+++ b/include/scsi/scsi_dbg.h
@@ -12,8 +12,6 @@ extern size_t __scsi_format_command(char *, size_t,
const unsigned char *, size_t);
extern void scsi_show_extd_sense(const struct scsi_device *, const char *,
unsigned char, unsigned char);
-extern void scsi_show_sense_hdr(const struct scsi_device *, const char *,
- const struct scsi_sense_hdr *);
extern void scsi_print_sense_hdr(const struct scsi_device *, const char *,
const struct scsi_sense_hdr *);
extern void scsi_print_sense(const struct scsi_cmnd *);
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index fe89d7cd67b9..f63a16760ae9 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -109,6 +109,7 @@ struct scsi_device {
char type;
char scsi_level;
char inq_periph_qual; /* PQ from INQUIRY data */
+ struct mutex inquiry_mutex;
unsigned char inquiry_len; /* valid bytes in 'inquiry' */
unsigned char * inquiry; /* INQUIRY response data */
const char * vendor; /* [back_compat] point into 'inquiry' ... */
@@ -117,9 +118,9 @@ struct scsi_device {
#define SCSI_VPD_PG_LEN 255
int vpd_pg83_len;
- unsigned char *vpd_pg83;
+ unsigned char __rcu *vpd_pg83;
int vpd_pg80_len;
- unsigned char *vpd_pg80;
+ unsigned char __rcu *vpd_pg80;
unsigned char current_tag; /* current tag */
struct scsi_target *sdev_target; /* used only for single_lun */
@@ -414,6 +415,8 @@ static inline int scsi_execute_req(struct scsi_device *sdev,
}
extern void sdev_disable_disk_events(struct scsi_device *sdev);
extern void sdev_enable_disk_events(struct scsi_device *sdev);
+extern int scsi_vpd_lun_id(struct scsi_device *, char *, size_t);
+extern int scsi_vpd_tpg_id(struct scsi_device *, int *);
#ifdef CONFIG_PM
extern int scsi_autopm_get_device(struct scsi_device *);
diff --git a/include/scsi/scsi_transport_sas.h b/include/scsi/scsi_transport_sas.h
index 0bd71e2702e3..13c0b2ba1b6c 100644
--- a/include/scsi/scsi_transport_sas.h
+++ b/include/scsi/scsi_transport_sas.h
@@ -10,6 +10,15 @@ struct scsi_transport_template;
struct sas_rphy;
struct request;
+#if !IS_ENABLED(CONFIG_SCSI_SAS_ATTRS)
+static inline int is_sas_attached(struct scsi_device *sdev)
+{
+ return 0;
+}
+#else
+extern int is_sas_attached(struct scsi_device *sdev);
+#endif
+
static inline int sas_protocol_ata(enum sas_protocol proto)
{
return ((proto & SAS_PROTOCOL_SATA) ||
@@ -180,6 +189,7 @@ extern int sas_phy_add(struct sas_phy *);
extern void sas_phy_delete(struct sas_phy *);
extern int scsi_is_sas_phy(const struct device *);
+u64 sas_get_address(struct scsi_device *);
unsigned int sas_tlr_supported(struct scsi_device *);
unsigned int sas_is_tlr_enabled(struct scsi_device *);
void sas_disable_tlr(struct scsi_device *);
diff --git a/include/uapi/scsi/cxlflash_ioctl.h b/include/uapi/scsi/cxlflash_ioctl.h
index 831351b2e660..2302f3ce5f86 100644
--- a/include/uapi/scsi/cxlflash_ioctl.h
+++ b/include/uapi/scsi/cxlflash_ioctl.h
@@ -31,6 +31,16 @@ struct dk_cxlflash_hdr {
};
/*
+ * Return flag definitions available to all ioctls
+ *
+ * Similar to the input flags, these are grown from the bottom-up with the
+ * intention that ioctl-specific return flag definitions would grow from the
+ * top-down, allowing the two sets to co-exist. While not required/enforced
+ * at this time, this provides future flexibility.
+ */
+#define DK_CXLFLASH_ALL_PORTS_ACTIVE 0x0000000000000001ULL
+
+/*
* Notes:
* -----
* The 'context_id' field of all ioctl structures contains the context