summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt75
-rw-r--r--drivers/net/phy/Kconfig13
-rw-r--r--drivers/net/phy/Makefile1
-rw-r--r--drivers/net/phy/mdio-mux-mmioreg.c170
4 files changed, 259 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt b/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt
new file mode 100644
index 000000000000..8516929c7251
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt
@@ -0,0 +1,75 @@
+Properties for an MDIO bus multiplexer controlled by a memory-mapped device
+
+This is a special case of a MDIO bus multiplexer. A memory-mapped device,
+like an FPGA, is used to control which child bus is connected. The mdio-mux
+node must be a child of the memory-mapped device. The driver currently only
+supports devices with eight-bit registers.
+
+Required properties in addition to the generic multiplexer properties:
+
+- compatible : string, must contain "mdio-mux-mmioreg"
+
+- reg : integer, contains the offset of the register that controls the bus
+ multiplexer. The size field in the 'reg' property is the size of
+ register, and must therefore be 1.
+
+- mux-mask : integer, contains an eight-bit mask that specifies which
+ bits in the register control the actual bus multiplexer. The
+ 'reg' property of each child mdio-mux node must be constrained by
+ this mask.
+
+Example:
+
+The FPGA node defines a memory-mapped FPGA with a register space of 0x30 bytes.
+For the "EMI2" MDIO bus, register 9 (BRDCFG1) controls the mux on that bus.
+A bitmask of 0x6 means that bits 1 and 2 (bit 0 is lsb) are the bits on
+BRDCFG1 that control the actual mux.
+
+ /* The FPGA node */
+ fpga: board-control@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p5020ds-fpga", "fsl,fpga-ngpixis";
+ reg = <3 0 0x30>;
+ ranges = <0 3 0 0x30>;
+
+ mdio-mux-emi2 {
+ compatible = "mdio-mux-mmioreg", "mdio-mux";
+ mdio-parent-bus = <&xmdio0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <9 1>; // BRDCFG1
+ mux-mask = <0x6>; // EMI2
+
+ emi2_slot1: mdio@0 { // Slot 1 XAUI (FM2)
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy_xgmii_slot1: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <4>;
+ };
+ };
+
+ emi2_slot2: mdio@2 { // Slot 2 XAUI (FM1)
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy_xgmii_slot2: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0>;
+ };
+ };
+ };
+ };
+
+ /* The parent MDIO bus. */
+ xmdio0: mdio@f1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-xmdio";
+ reg = <0xf1000 0x1000>;
+ interrupts = <100 1 0 0>;
+ };
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 3090dc65a6f1..983bbf4d5ef6 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -159,6 +159,19 @@ config MDIO_BUS_MUX_GPIO
several child MDIO busses to a parent bus. Child bus
selection is under the control of GPIO lines.
+config MDIO_BUS_MUX_MMIOREG
+ tristate "Support for MMIO device-controlled MDIO bus multiplexers"
+ depends on OF_MDIO
+ select MDIO_BUS_MUX
+ help
+ This module provides a driver for MDIO bus multiplexers that
+ are controlled via a simple memory-mapped device, like an FPGA.
+ The multiplexer connects one of several child MDIO busses to a
+ parent bus. Child bus selection is under the control of one of
+ the FPGA's registers.
+
+ Currently, only 8-bit registers are supported.
+
endif # PHYLIB
config MICREL_KS8995MA
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 6d2dc6c94f2e..426674debae4 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -28,3 +28,4 @@ obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
obj-$(CONFIG_AMD_PHY) += amd.o
obj-$(CONFIG_MDIO_BUS_MUX) += mdio-mux.o
obj-$(CONFIG_MDIO_BUS_MUX_GPIO) += mdio-mux-gpio.o
+obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o
diff --git a/drivers/net/phy/mdio-mux-mmioreg.c b/drivers/net/phy/mdio-mux-mmioreg.c
new file mode 100644
index 000000000000..098239a98b19
--- /dev/null
+++ b/drivers/net/phy/mdio-mux-mmioreg.c
@@ -0,0 +1,170 @@
+/*
+ * Simple memory-mapped device MDIO MUX driver
+ *
+ * Author: Timur Tabi <timur@freescale.com>
+ *
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/device.h>
+#include <linux/of_mdio.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/phy.h>
+#include <linux/mdio-mux.h>
+
+struct mdio_mux_mmioreg_state {
+ void *mux_handle;
+ phys_addr_t phys;
+ uint8_t mask;
+};
+
+/*
+ * MDIO multiplexing switch function
+ *
+ * This function is called by the mdio-mux layer when it thinks the mdio bus
+ * multiplexer needs to switch.
+ *
+ * 'current_child' is the current value of the mux register (masked via
+ * s->mask).
+ *
+ * 'desired_child' is the value of the 'reg' property of the target child MDIO
+ * node.
+ *
+ * The first time this function is called, current_child == -1.
+ *
+ * If current_child == desired_child, then the mux is already set to the
+ * correct bus.
+ */
+static int mdio_mux_mmioreg_switch_fn(int current_child, int desired_child,
+ void *data)
+{
+ struct mdio_mux_mmioreg_state *s = data;
+
+ if (current_child ^ desired_child) {
+ void *p = ioremap(s->phys, 1);
+ uint8_t x, y;
+
+ if (!p)
+ return -ENOMEM;
+
+ x = ioread8(p);
+ y = (x & ~s->mask) | desired_child;
+ if (x != y) {
+ iowrite8((x & ~s->mask) | desired_child, p);
+ pr_debug("%s: %02x -> %02x\n", __func__, x, y);
+ }
+
+ iounmap(p);
+ }
+
+ return 0;
+}
+
+static int __devinit mdio_mux_mmioreg_probe(struct platform_device *pdev)
+{
+ struct device_node *np2, *np = pdev->dev.of_node;
+ struct mdio_mux_mmioreg_state *s;
+ struct resource res;
+ const __be32 *iprop;
+ int len, ret;
+
+ dev_dbg(&pdev->dev, "probing node %s\n", np->full_name);
+
+ s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL);
+ if (!s)
+ return -ENOMEM;
+
+ ret = of_address_to_resource(np, 0, &res);
+ if (ret) {
+ dev_err(&pdev->dev, "could not obtain memory map for node %s\n",
+ np->full_name);
+ return ret;
+ }
+ s->phys = res.start;
+
+ if (resource_size(&res) != sizeof(uint8_t)) {
+ dev_err(&pdev->dev, "only 8-bit registers are supported\n");
+ return -EINVAL;
+ }
+
+ iprop = of_get_property(np, "mux-mask", &len);
+ if (!iprop || len != sizeof(uint32_t)) {
+ dev_err(&pdev->dev, "missing or invalid mux-mask property\n");
+ return -ENODEV;
+ }
+ if (be32_to_cpup(iprop) > 255) {
+ dev_err(&pdev->dev, "only 8-bit registers are supported\n");
+ return -EINVAL;
+ }
+ s->mask = be32_to_cpup(iprop);
+
+ /*
+ * Verify that the 'reg' property of each child MDIO bus does not
+ * set any bits outside of the 'mask'.
+ */
+ for_each_available_child_of_node(np, np2) {
+ iprop = of_get_property(np2, "reg", &len);
+ if (!iprop || len != sizeof(uint32_t)) {
+ dev_err(&pdev->dev, "mdio-mux child node %s is "
+ "missing a 'reg' property\n", np2->full_name);
+ return -ENODEV;
+ }
+ if (be32_to_cpup(iprop) & ~s->mask) {
+ dev_err(&pdev->dev, "mdio-mux child node %s has "
+ "a 'reg' value with unmasked bits\n",
+ np2->full_name);
+ return -ENODEV;
+ }
+ }
+
+ ret = mdio_mux_init(&pdev->dev, mdio_mux_mmioreg_switch_fn,
+ &s->mux_handle, s);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register mdio-mux bus %s\n",
+ np->full_name);
+ return ret;
+ }
+
+ pdev->dev.platform_data = s;
+
+ return 0;
+}
+
+static int __devexit mdio_mux_mmioreg_remove(struct platform_device *pdev)
+{
+ struct mdio_mux_mmioreg_state *s = dev_get_platdata(&pdev->dev);
+
+ mdio_mux_uninit(s->mux_handle);
+
+ return 0;
+}
+
+static struct of_device_id mdio_mux_mmioreg_match[] = {
+ {
+ .compatible = "mdio-mux-mmioreg",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mdio_mux_mmioreg_match);
+
+static struct platform_driver mdio_mux_mmioreg_driver = {
+ .driver = {
+ .name = "mdio-mux-mmioreg",
+ .owner = THIS_MODULE,
+ .of_match_table = mdio_mux_mmioreg_match,
+ },
+ .probe = mdio_mux_mmioreg_probe,
+ .remove = __devexit_p(mdio_mux_mmioreg_remove),
+};
+
+module_platform_driver(mdio_mux_mmioreg_driver);
+
+MODULE_AUTHOR("Timur Tabi <timur@freescale.com>");
+MODULE_DESCRIPTION("Memory-mapped device MDIO MUX driver");
+MODULE_LICENSE("GPL v2");
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-08 20:14:47 +0000