diff options
33 files changed, 82 insertions, 332 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index aca136b84508..7f6bc290d455 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4339,7 +4339,7 @@ MIPS M: Ralf Baechle <ralf@linux-mips.org> L: linux-mips@linux-mips.org W: http://www.linux-mips.org/ -T: git git://git.linux-mips.org/pub/scm/linux.git +T: git git://git.linux-mips.org/pub/scm/ralf/linux.git Q: http://patchwork.linux-mips.org/project/linux-mips/list/ S: Supported F: Documentation/mips/ diff --git a/arch/mips/cavium-octeon/flash_setup.c b/arch/mips/cavium-octeon/flash_setup.c index 975c20327bb1..0a430e06f5e5 100644 --- a/arch/mips/cavium-octeon/flash_setup.c +++ b/arch/mips/cavium-octeon/flash_setup.c @@ -17,8 +17,6 @@ static struct map_info flash_map; static struct mtd_info *mymtd; -static int nr_parts; -static struct mtd_partition *parts; static const char *part_probe_types[] = { "cmdlinepart", #ifdef CONFIG_MTD_REDBOOT_PARTS @@ -61,11 +59,8 @@ static int __init flash_init(void) mymtd = do_map_probe("cfi_probe", &flash_map); if (mymtd) { mymtd->owner = THIS_MODULE; - - nr_parts = parse_mtd_partitions(mymtd, - part_probe_types, - &parts, 0); - mtd_device_register(mymtd, parts, nr_parts); + mtd_device_parse_register(mymtd, part_probe_types, + 0, NULL, 0); } else { pr_err("Failed to register MTD device for flash\n"); } diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c index 8b606423bbd7..efcfff4d4627 100644 --- a/arch/mips/cavium-octeon/smp.c +++ b/arch/mips/cavium-octeon/smp.c @@ -207,8 +207,9 @@ void octeon_prepare_cpus(unsigned int max_cpus) * the other bits alone. */ cvmx_write_csr(CVMX_CIU_MBOX_CLRX(cvmx_get_core_num()), 0xffff); - if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, IRQF_DISABLED, - "SMP-IPI", mailbox_interrupt)) { + if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, + IRQF_PERCPU | IRQF_NO_THREAD, "SMP-IPI", + mailbox_interrupt)) { panic("Cannot request_irq(OCTEON_IRQ_MBOX0)\n"); } } diff --git a/arch/mips/emma/common/prom.c b/arch/mips/emma/common/prom.c index 708f08761406..cae42259d6da 100644 --- a/arch/mips/emma/common/prom.c +++ b/arch/mips/emma/common/prom.c @@ -50,7 +50,7 @@ void __init prom_init(void) /* arg[0] is "g", the rest is boot parameters */ for (i = 1; i < argc; i++) { - if (strlen(arcs_cmdline) + strlen(arg[i] + 1) + if (strlen(arcs_cmdline) + strlen(arg[i]) + 1 >= sizeof(arcs_cmdline)) break; strcat(arcs_cmdline, arg[i]); diff --git a/arch/mips/include/asm/mach-bcm47xx/gpio.h b/arch/mips/include/asm/mach-bcm47xx/gpio.h index 76961cabeedf..2ef17e8df403 100644 --- a/arch/mips/include/asm/mach-bcm47xx/gpio.h +++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h @@ -36,6 +36,8 @@ static inline int gpio_get_value(unsigned gpio) return -EINVAL; } +#define gpio_get_value_cansleep gpio_get_value + static inline void gpio_set_value(unsigned gpio, int value) { switch (bcm47xx_bus_type) { @@ -54,6 +56,19 @@ static inline void gpio_set_value(unsigned gpio, int value) } } +#define gpio_set_value_cansleep gpio_set_value + +static inline int gpio_cansleep(unsigned gpio) +{ + return 0; +} + +static inline int gpio_is_valid(unsigned gpio) +{ + return gpio < (BCM47XX_EXTIF_GPIO_LINES + BCM47XX_CHIPCO_GPIO_LINES); +} + + static inline int gpio_direction_input(unsigned gpio) { switch (bcm47xx_bus_type) { @@ -137,7 +152,4 @@ static inline int gpio_polarity(unsigned gpio, int value) } -/* cansleep wrappers */ -#include <asm-generic/gpio.h> - #endif /* __BCM47XX_GPIO_H */ diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h index ecea7871dec2..d8dad5340ea3 100644 --- a/arch/mips/include/asm/unistd.h +++ b/arch/mips/include/asm/unistd.h @@ -365,16 +365,18 @@ #define __NR_syncfs (__NR_Linux + 342) #define __NR_sendmmsg (__NR_Linux + 343) #define __NR_setns (__NR_Linux + 344) +#define __NR_process_vm_readv (__NR_Linux + 345) +#define __NR_process_vm_writev (__NR_Linux + 346) /* * Offset of the last Linux o32 flavoured syscall */ -#define __NR_Linux_syscalls 344 +#define __NR_Linux_syscalls 346 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ #define __NR_O32_Linux 4000 -#define __NR_O32_Linux_syscalls 344 +#define __NR_O32_Linux_syscalls 346 #if _MIPS_SIM == _MIPS_SIM_ABI64 @@ -686,16 +688,18 @@ #define __NR_syncfs (__NR_Linux + 301) #define __NR_sendmmsg (__NR_Linux + 302) #define __NR_setns (__NR_Linux + 303) +#define __NR_process_vm_readv (__NR_Linux + 304) +#define __NR_process_vm_writev (__NR_Linux + 305) /* * Offset of the last Linux 64-bit flavoured syscall */ -#define __NR_Linux_syscalls 303 +#define __NR_Linux_syscalls 305 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */ #define __NR_64_Linux 5000 -#define __NR_64_Linux_syscalls 303 +#define __NR_64_Linux_syscalls 305 #if _MIPS_SIM == _MIPS_SIM_NABI32 @@ -1012,16 +1016,18 @@ #define __NR_syncfs (__NR_Linux + 306) #define __NR_sendmmsg (__NR_Linux + 307) #define __NR_setns (__NR_Linux + 308) +#define __NR_process_vm_readv (__NR_Linux + 309) +#define __NR_process_vm_writev (__NR_Linux + 310) /* * Offset of the last N32 flavoured syscall */ -#define __NR_Linux_syscalls 308 +#define __NR_Linux_syscalls 310 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */ #define __NR_N32_Linux 6000 -#define __NR_N32_Linux_syscalls 308 +#define __NR_N32_Linux_syscalls 310 #ifdef __KERNEL__ diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c index 98c5a9737c14..e2d8e199be32 100644 --- a/arch/mips/kernel/cevt-r4k.c +++ b/arch/mips/kernel/cevt-r4k.c @@ -103,19 +103,10 @@ static int c0_compare_int_pending(void) /* * Compare interrupt can be routed and latched outside the core, - * so a single execution hazard barrier may not be enough to give - * it time to clear as seen in the Cause register. 4 time the - * pipeline depth seems reasonably conservative, and empirically - * works better in configurations with high CPU/bus clock ratios. + * so wait up to worst case number of cycle counter ticks for timer interrupt + * changes to propagate to the cause register. */ - -#define compare_change_hazard() \ - do { \ - irq_disable_hazard(); \ - irq_disable_hazard(); \ - irq_disable_hazard(); \ - irq_disable_hazard(); \ - } while (0) +#define COMPARE_INT_SEEN_TICKS 50 int c0_compare_int_usable(void) { @@ -126,8 +117,12 @@ int c0_compare_int_usable(void) * IP7 already pending? Try to clear it by acking the timer. */ if (c0_compare_int_pending()) { - write_c0_compare(read_c0_count()); - compare_change_hazard(); + cnt = read_c0_count(); + write_c0_compare(cnt); + back_to_back_c0_hazard(); + while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS)) + if (!c0_compare_int_pending()) + break; if (c0_compare_int_pending()) return 0; } @@ -136,7 +131,7 @@ int c0_compare_int_usable(void) cnt = read_c0_count(); cnt += delta; write_c0_compare(cnt); - compare_change_hazard(); + back_to_back_c0_hazard(); if ((int)(read_c0_count() - cnt) < 0) break; /* increase delta if the timer was already expired */ @@ -145,12 +140,17 @@ int c0_compare_int_usable(void) while ((int)(read_c0_count() - cnt) <= 0) ; /* Wait for expiry */ - compare_change_hazard(); + while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS)) + if (c0_compare_int_pending()) + break; if (!c0_compare_int_pending()) return 0; - - write_c0_compare(read_c0_count()); - compare_change_hazard(); + cnt = read_c0_count(); + write_c0_compare(cnt); + back_to_back_c0_hazard(); + while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS)) + if (!c0_compare_int_pending()) + break; if (c0_compare_int_pending()) return 0; diff --git a/arch/mips/kernel/cpufreq/loongson2_clock.c b/arch/mips/kernel/cpufreq/loongson2_clock.c index cefc6e259baf..5426779d9fdb 100644 --- a/arch/mips/kernel/cpufreq/loongson2_clock.c +++ b/arch/mips/kernel/cpufreq/loongson2_clock.c @@ -7,6 +7,7 @@ * for more details. */ +#include <linux/module.h> #include <linux/cpufreq.h> #include <linux/platform_device.h> diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 47920657968d..a632bc144efa 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -591,6 +591,8 @@ einval: li v0, -ENOSYS sys sys_syncfs 1 sys sys_sendmmsg 4 sys sys_setns 2 + sys sys_process_vm_readv 6 /* 4345 */ + sys sys_process_vm_writev 6 .endm /* We pre-compute the number of _instruction_ bytes needed to diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index fb7334bea731..3b5a5e9ae49c 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -430,4 +430,6 @@ sys_call_table: PTR sys_syncfs PTR sys_sendmmsg PTR sys_setns + PTR sys_process_vm_readv + PTR sys_process_vm_writev /* 5305 */ .size sys_call_table,.-sys_call_table diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index 6de1f598346e..6be6f7020923 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -430,4 +430,6 @@ EXPORT(sysn32_call_table) PTR sys_syncfs PTR compat_sys_sendmmsg PTR sys_setns + PTR compat_sys_process_vm_readv + PTR compat_sys_process_vm_writev /* 6310 */ .size sysn32_call_table,.-sysn32_call_table diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 1d813169e453..54228553691d 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -548,4 +548,6 @@ sys_call_table: PTR sys_syncfs PTR compat_sys_sendmmsg PTR sys_setns + PTR compat_sys_process_vm_readv /* 4345 */ + PTR compat_sys_process_vm_writev .size sys_call_table,.-sys_call_table diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 261ccbc07740..5c8a49d55054 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1596,7 +1596,8 @@ void __cpuinit per_cpu_trap_init(void) } #endif /* CONFIG_MIPS_MT_SMTC */ - cpu_data[cpu].asid_cache = ASID_FIRST_VERSION; + if (!cpu_data[cpu].asid_cache) + cpu_data[cpu].asid_cache = ASID_FIRST_VERSION; atomic_inc(&init_mm.mm_count); current->active_mm = &init_mm; diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c index 7e9c0ffc11a5..77ed70fc2fe5 100644 --- a/arch/mips/lantiq/clk.c +++ b/arch/mips/lantiq/clk.c @@ -7,7 +7,7 @@ * Copyright (C) 2010 John Crispin <blogic@openwrt.org> */ #include <linux/io.h> -#include <linux/module.h> +#include <linux/export.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/mips/lantiq/devices.c b/arch/mips/lantiq/devices.c index 44a36771c819..de1cb2bcd79a 100644 --- a/arch/mips/lantiq/devices.c +++ b/arch/mips/lantiq/devices.c @@ -7,7 +7,7 @@ */ #include <linux/init.h> -#include <linux/module.h> +#include <linux/export.h> #include <linux/types.h> #include <linux/string.h> #include <linux/kernel.h> diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c index 56ba007bf1e5..e34fcfd0d5ca 100644 --- a/arch/mips/lantiq/prom.c +++ b/arch/mips/lantiq/prom.c @@ -6,7 +6,7 @@ * Copyright (C) 2010 John Crispin <blogic@openwrt.org> */ -#include <linux/module.h> +#include <linux/export.h> #include <linux/clk.h> #include <asm/bootinfo.h> #include <asm/time.h> diff --git a/arch/mips/lantiq/setup.c b/arch/mips/lantiq/setup.c index 9b8af77ed0f9..1ff6c9d6cb93 100644 --- a/arch/mips/lantiq/setup.c +++ b/arch/mips/lantiq/setup.c @@ -7,7 +7,7 @@ */ #include <linux/kernel.h> -#include <linux/module.h> +#include <linux/export.h> #include <linux/io.h> #include <linux/ioport.h> #include <asm/bootinfo.h> diff --git a/arch/mips/lantiq/xway/clk-ase.c b/arch/mips/lantiq/xway/clk-ase.c index 22d823acd536..652258309c9c 100644 --- a/arch/mips/lantiq/xway/clk-ase.c +++ b/arch/mips/lantiq/xway/clk-ase.c @@ -7,7 +7,7 @@ */ #include <linux/io.h> -#include <linux/module.h> +#include <linux/export.h> #include <linux/init.h> #include <linux/clk.h> diff --git a/arch/mips/lantiq/xway/clk-xway.c b/arch/mips/lantiq/xway/clk-xway.c index ddd39593c581..696b1a3e0642 100644 --- a/arch/mips/lantiq/xway/clk-xway.c +++ b/arch/mips/lantiq/xway/clk-xway.c @@ -7,7 +7,7 @@ */ #include <linux/io.h> -#include <linux/module.h> +#include <linux/export.h> #include <linux/init.h> #include <linux/clk.h> diff --git a/arch/mips/lantiq/xway/devices.c b/arch/mips/lantiq/xway/devices.c index d0e32ab2ea07..d614aa7ff07f 100644 --- a/arch/mips/lantiq/xway/devices.c +++ b/arch/mips/lantiq/xway/devices.c @@ -7,7 +7,7 @@ */ #include <linux/init.h> -#include <linux/module.h> +#include <linux/export.h> #include <linux/types.h> #include <linux/string.h> #include <linux/mtd/physmap.h> diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c index 4278a459d6c4..cbb6ae5747b9 100644 --- a/arch/mips/lantiq/xway/dma.c +++ b/arch/mips/lantiq/xway/dma.c @@ -19,6 +19,7 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/dma-mapping.h> +#include <linux/export.h> #include <lantiq_soc.h> #include <xway_dma.h> diff --git a/arch/mips/lantiq/xway/gpio.c b/arch/mips/lantiq/xway/gpio.c index a321451a5455..d2fa98f3c78d 100644 --- a/arch/mips/lantiq/xway/gpio.c +++ b/arch/mips/lantiq/xway/gpio.c @@ -7,7 +7,7 @@ */ #include <linux/slab.h> -#include <linux/module.h> +#include <linux/export.h> #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/ioport.h> diff --git a/arch/mips/lantiq/xway/gpio_ebu.c b/arch/mips/lantiq/xway/gpio_ebu.c index a479355abdb9..b91c7f17f10f 100644 --- a/arch/mips/lantiq/xway/gpio_ebu.c +++ b/arch/mips/lantiq/xway/gpio_ebu.c @@ -7,7 +7,7 @@ */ #include <linux/init.h> -#include <linux/module.h> +#include <linux/export.h> #include <linux/types.h> #include <linux/platform_device.h> #include <linux/mutex.h> diff --git a/arch/mips/lantiq/xway/gpio_stp.c b/arch/mips/lantiq/xway/gpio_stp.c index 67d59d690340..ff9991cddeaa 100644 --- a/arch/mips/lantiq/xway/gpio_stp.c +++ b/arch/mips/lantiq/xway/gpio_stp.c @@ -9,7 +9,7 @@ #include <linux/slab.h> #include <linux/init.h> -#include <linux/module.h> +#include <linux/export.h> #include <linux/types.h> #include <linux/platform_device.h> #include <linux/mutex.h> diff --git a/arch/mips/lantiq/xway/prom-ase.c b/arch/mips/lantiq/xway/prom-ase.c index abe49f4db57f..ae4959ae865c 100644 --- a/arch/mips/lantiq/xway/prom-ase.c +++ b/arch/mips/lantiq/xway/prom-ase.c @@ -6,7 +6,7 @@ * Copyright (C) 2010 John Crispin <blogic@openwrt.org> */ -#include <linux/module.h> +#include <linux/export.h> #include <linux/clk.h> #include <asm/bootinfo.h> #include <asm/time.h> diff --git a/arch/mips/lantiq/xway/prom-xway.c b/arch/mips/lantiq/xway/prom-xway.c index 1686692ac24d..2228133ca356 100644 --- a/arch/mips/lantiq/xway/prom-xway.c +++ b/arch/mips/lantiq/xway/prom-xway.c @@ -6,7 +6,7 @@ * Copyright (C) 2010 John Crispin <blogic@openwrt.org> */ -#include <linux/module.h> +#include <linux/export.h> #include <linux/clk.h> #include <asm/bootinfo.h> #include <asm/time.h> diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c index a1be36d0e490..3d41f0bb5bf7 100644 --- a/arch/mips/lantiq/xway/reset.c +++ b/arch/mips/lantiq/xway/reset.c @@ -10,7 +10,7 @@ #include <linux/io.h> #include <linux/ioport.h> #include <linux/pm.h> -#include <linux/module.h> +#include <linux/export.h> #include <asm/reboot.h> #include <lantiq_soc.h> diff --git a/arch/mips/nxp/pnx8550/common/pci.c b/arch/mips/nxp/pnx8550/common/pci.c deleted file mode 100644 index 98e86ddb86cc..000000000000 --- a/arch/mips/nxp/pnx8550/common/pci.c +++ /dev/null @@ -1,134 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * - * Author: source@mvista.com - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/init.h> - -#include <pci.h> -#include <glb.h> -#include <nand.h> - -static struct resource pci_io_resource = { - .start = PNX8550_PCIIO + 0x1000, /* reserve regacy I/O space */ - .end = PNX8550_PCIIO + PNX8550_PCIIO_SIZE, - .name = "pci IO space", - .flags = IORESOURCE_IO -}; - -static struct resource pci_mem_resource = { - .start = PNX8550_PCIMEM, - .end = PNX8550_PCIMEM + PNX8550_PCIMEM_SIZE - 1, - .name = "pci memory space", - .flags = IORESOURCE_MEM -}; - -extern struct pci_ops pnx8550_pci_ops; - -static struct pci_controller pnx8550_controller = { - .pci_ops = &pnx8550_pci_ops, - .io_map_base = PNX8550_PORT_BASE, - .io_resource = &pci_io_resource, - .mem_resource = &pci_mem_resource, -}; - -/* Return the total size of DRAM-memory, (RANK0 + RANK1) */ -static inline unsigned long get_system_mem_size(void) -{ - /* Read IP2031_RANK0_ADDR_LO */ - unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010); - /* Read IP2031_RANK1_ADDR_HI */ - unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018); - - return dram_r1_hi - dram_r0_lo + 1; -} - -static int __init pnx8550_pci_setup(void) -{ - int pci_mem_code; - int mem_size = get_system_mem_size() >> 20; - - /* Clear the Global 2 Register, PCI Inta Output Enable Registers - Bit 1:Enable DAC Powerdown - -> 0:DACs are enabled and are working normally - 1:DACs are powerdown - Bit 0:Enable of PCI inta output - -> 0 = Disable PCI inta output - 1 = Enable PCI inta output - */ - PNX8550_GLB2_ENAB_INTA_O = 0; - - /* Calc the PCI mem size code */ - if (mem_size >= 128) - pci_mem_code = SIZE_128M; - else if (mem_size >= 64) - pci_mem_code = SIZE_64M; - else if (mem_size >= 32) - pci_mem_code = SIZE_32M; - else - pci_mem_code = SIZE_16M; - - /* Set PCI_XIO registers */ - outl(pci_mem_resource.start, PCI_BASE | PCI_BASE1_LO); - outl(pci_mem_resource.end + 1, PCI_BASE | PCI_BASE1_HI); - outl(pci_io_resource.start, PCI_BASE | PCI_BASE2_LO); - outl(pci_io_resource.end, PCI_BASE | PCI_BASE2_HI); - - /* Send memory transaction via PCI_BASE2 */ - outl(0x00000001, PCI_BASE | PCI_IO); - - /* Unlock the setup register */ - outl(0xca, PCI_BASE | PCI_UNLOCKREG); - - /* - * BAR0 of PNX8550 (pci base 10) must be zero in order for ide - * to work, and in order for bus_to_baddr to work without any - * hacks. - */ - outl(0x00000000, PCI_BASE | PCI_BASE10); - - /* - *These two bars are set by default or the boot code. - * However, it's safer to set them here so we're not boot - * code dependent. - */ - outl(0x1be00000, PCI_BASE | PCI_BASE14); /* PNX MMIO */ - outl(PNX8550_NAND_BASE_ADDR, PCI_BASE | PCI_BASE18); /* XIO */ - - outl(PCI_EN_TA | - PCI_EN_PCI2MMI | - PCI_EN_XIO | - PCI_SETUP_BASE18_SIZE(SIZE_32M) | - PCI_SETUP_BASE18_EN | - PCI_SETUP_BASE14_EN | - PCI_SETUP_BASE10_PREF | - PCI_SETUP_BASE10_SIZE(pci_mem_code) | - PCI_SETUP_CFGMANAGE_EN | - PCI_SETUP_PCIARB_EN, - PCI_BASE | - PCI_SETUP); /* PCI_SETUP */ - outl(0x00000000, PCI_BASE | PCI_CTRL); /* PCI_CONTROL */ - - register_pci_controller(&pnx8550_controller); - - return 0; -} - -arch_initcall(pnx8550_pci_setup); diff --git a/arch/mips/nxp/pnx8550/common/setup.c b/arch/mips/nxp/pnx8550/common/setup.c deleted file mode 100644 index 71adac323323..000000000000 --- a/arch/mips/nxp/pnx8550/common/setup.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * - * 2.6 port, Embedded Alley Solutions, Inc - * - * Based on Per Hallsmark, per.hallsmark@mvista.com - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/irq.h> -#include <linux/mm.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/serial_pnx8xxx.h> -#include <linux/pm.h> - -#include <asm/cpu.h> -#include <asm/bootinfo.h> -#include <asm/irq.h> -#include <asm/mipsregs.h> -#include <asm/reboot.h> -#include <asm/pgtable.h> -#include <asm/time.h> - -#include <glb.h> -#include <int.h> -#include <pci.h> -#include <uart.h> -#include <nand.h> - -extern void __init board_setup(void); -extern void pnx8550_machine_restart(char *); -extern void pnx8550_machine_halt(void); -extern void pnx8550_machine_power_off(void); -extern struct resource ioport_resource; -extern struct resource iomem_resource; -extern char *prom_getcmdline(void); - -struct resource standard_io_resources[] = { - { - .start = 0x00, - .end = 0x1f, - .name = "dma1", - .flags = IORESOURCE_BUSY - }, { - .start = 0x40, - .end = 0x5f, - .name = "timer", - .flags = IORESOURCE_BUSY - }, { - .start = 0x80, - .end = 0x8f, - .name = "dma page reg", - .flags = IORESOURCE_BUSY - }, { - .start = 0xc0, - .end = 0xdf, - .name = "dma2", - .flags = IORESOURCE_BUSY - }, -}; - -#define STANDARD_IO_RESOURCES ARRAY_SIZE(standard_io_resources) - -extern struct resource pci_io_resource; -extern struct resource pci_mem_resource; - -/* Return the total size of DRAM-memory, (RANK0 + RANK1) */ -unsigned long get_system_mem_size(void) -{ - /* Read IP2031_RANK0_ADDR_LO */ - unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010); - /* Read IP2031_RANK1_ADDR_HI */ - unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018); - - return dram_r1_hi - dram_r0_lo + 1; -} - -int pnx8550_console_port = -1; - -void __init plat_mem_setup(void) -{ - int i; - char* argptr; - - board_setup(); /* board specific setup */ - - _machine_restart = pnx8550_machine_restart; - _machine_halt = pnx8550_machine_halt; - pm_power_off = pnx8550_machine_power_off; - - /* Clear the Global 2 Register, PCI Inta Output Enable Registers - Bit 1:Enable DAC Powerdown - -> 0:DACs are enabled and are working normally - 1:DACs are powerdown - Bit 0:Enable of PCI inta output - -> 0 = Disable PCI inta output - 1 = Enable PCI inta output - */ - PNX8550_GLB2_ENAB_INTA_O = 0; - - /* IO/MEM resources. */ - set_io_port_base(PNX8550_PORT_BASE); - ioport_resource.start = 0; - ioport_resource.end = ~0; - iomem_resource.start = 0; - iomem_resource.end = ~0; - - /* Request I/O space for devices on this board */ - for (i = 0; i < STANDARD_IO_RESOURCES; i++) - request_resource(&ioport_resource, standard_io_resources + i); - - /* Place the Mode Control bit for GPIO pin 16 in primary function */ - /* Pin 16 is used by UART1, UA1_TX */ - outl((PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_16_BIT) | - (PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_17_BIT), - PNX8550_GPIO_MC1); - - argptr = prom_getcmdline(); - if ((argptr = strstr(argptr, "console=ttyS")) != NULL) { - argptr += strlen("console=ttyS"); - pnx8550_console_port = *argptr == '0' ? 0 : 1; - - /* We must initialize the UART (console) before early printk */ - /* Set LCR to 8-bit and BAUD to 38400 (no 5) */ - ip3106_lcr(UART_BASE, pnx8550_console_port) = - PNX8XXX_UART_LCR_8BIT; - ip3106_baud(UART_BASE, pnx8550_console_port) = 5; - } -} diff --git a/arch/mips/pci/pci-alchemy.c b/arch/mips/pci/pci-alchemy.c index 4ee57104e47b..b5ce041cdafb 100644 --- a/arch/mips/pci/pci-alchemy.c +++ b/arch/mips/pci/pci-alchemy.c @@ -7,6 +7,7 @@ * Support for all devices (greater than 16) added by David Gathright. */ +#include <linux/export.h> #include <linux/types.h> #include <linux/pci.h> #include <linux/platform_device.h> diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c index 8656388b34bd..be1e1afe12c3 100644 --- a/arch/mips/pci/pci-lantiq.c +++ b/arch/mips/pci/pci-lantiq.c @@ -13,6 +13,7 @@ #include <linux/delay.h> #include <linux/mm.h> #include <linux/vmalloc.h> +#include <linux/export.h> #include <linux/platform_device.h> #include <asm/pci.h> diff --git a/arch/mips/pmc-sierra/yosemite/prom.c b/arch/mips/pmc-sierra/yosemite/prom.c index cf4c868715ac..dcc926e06fce 100644 --- a/arch/mips/pmc-sierra/yosemite/prom.c +++ b/arch/mips/pmc-sierra/yosemite/prom.c @@ -102,7 +102,7 @@ void __init prom_init(void) /* Get the boot parameters */ for (i = 1; i < argc; i++) { - if (strlen(arcs_cmdline) + strlen(arg[i] + 1) >= + if (strlen(arcs_cmdline) + strlen(arg[i]) + 1 >= sizeof(arcs_cmdline)) break; diff --git a/drivers/staging/octeon/ethernet-tx.c b/drivers/staging/octeon/ethernet-tx.c index b445cd63f901..2542c3743904 100644 --- a/drivers/staging/octeon/ethernet-tx.c +++ b/drivers/staging/octeon/ethernet-tx.c @@ -275,7 +275,7 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev) CVM_OCT_SKB_CB(skb)[0] = hw_buffer.u64; for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { struct skb_frag_struct *fs = skb_shinfo(skb)->frags + i; - hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)(page_address(fs->page) + fs->page_offset)); + hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)(page_address(fs->page.p) + fs->page_offset)); hw_buffer.s.size = fs->size; CVM_OCT_SKB_CB(skb)[i + 1] = hw_buffer.u64; } |