summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/usb/serial/aircable.c8
-rw-r--r--drivers/usb/serial/belkin_sa.c34
-rw-r--r--drivers/usb/serial/cyberjack.c23
-rw-r--r--drivers/usb/serial/cypress_m8.c18
-rw-r--r--drivers/usb/serial/digi_acceleport.c65
-rw-r--r--drivers/usb/serial/empeg.c8
-rw-r--r--drivers/usb/serial/ezusb.c3
-rw-r--r--drivers/usb/serial/ftdi_sio.c68
-rw-r--r--drivers/usb/serial/io_edgeport.c16
-rw-r--r--drivers/usb/serial/ipaq.c27
-rw-r--r--drivers/usb/serial/keyspan_pda.c14
-rw-r--r--drivers/usb/serial/kl5kusb105.c46
-rw-r--r--drivers/usb/serial/mct_u232.c39
-rw-r--r--drivers/usb/serial/mos7720.c19
-rw-r--r--drivers/usb/serial/mos7840.c26
-rw-r--r--drivers/usb/serial/omninet.c19
-rw-r--r--drivers/usb/serial/safe_serial.c15
-rw-r--r--drivers/usb/serial/spcp8x5.c7
-rw-r--r--drivers/usb/serial/usb-serial.c19
-rw-r--r--drivers/usb/serial/visor.c2
-rw-r--r--drivers/usb/serial/whiteheat.c113
21 files changed, 346 insertions, 243 deletions
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index 99fb7dc59c45..537f953bd7f8 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -220,8 +220,8 @@ static void aircable_send(struct usb_serial_port *port)
buf = kzalloc(count + HCI_HEADER_LENGTH, GFP_ATOMIC);
if (!buf) {
- err("%s- kzalloc(%d) failed.", __func__,
- count + HCI_HEADER_LENGTH);
+ dev_err(&port->dev, "%s- kzalloc(%d) failed.\n",
+ __func__, count + HCI_HEADER_LENGTH);
return;
}
@@ -276,7 +276,7 @@ static void aircable_read(struct work_struct *work)
if (!tty) {
schedule_work(&priv->rx_work);
- err("%s - No tty available", __func__);
+ dev_err(&port->dev, "%s - No tty available\n", __func__);
return ;
}
@@ -336,7 +336,7 @@ static int aircable_attach(struct usb_serial *serial)
priv = kzalloc(sizeof(struct aircable_private), GFP_KERNEL);
if (!priv) {
- err("%s- kmalloc(%Zd) failed.", __func__,
+ dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__,
sizeof(struct aircable_private));
return -ENOMEM;
}
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index bb19f1c2e0d3..b7eacad4d48c 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -228,7 +228,7 @@ static int belkin_sa_open(struct tty_struct *tty,
port->read_urb->dev = port->serial->dev;
retval = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (retval) {
- err("usb_submit_urb(read bulk) failed");
+ dev_err(&port->dev, "usb_submit_urb(read bulk) failed\n");
goto exit;
}
@@ -236,7 +236,7 @@ static int belkin_sa_open(struct tty_struct *tty,
retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (retval) {
usb_kill_urb(port->read_urb);
- err(" usb_submit_urb(read int) failed");
+ dev_err(&port->dev, "usb_submit_urb(read int) failed\n");
}
exit:
@@ -342,8 +342,8 @@ static void belkin_sa_read_int_callback(struct urb *urb)
exit:
retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval)
- err("%s - usb_submit_urb failed with result %d",
- __func__, retval);
+ dev_err(&port->dev, "%s - usb_submit_urb failed with "
+ "result %d\n", __func__, retval);
}
static void belkin_sa_set_termios(struct tty_struct *tty,
@@ -382,12 +382,12 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
if ((old_cflag & CBAUD) == B0) {
control_state |= (TIOCM_DTR|TIOCM_RTS);
if (BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, 1) < 0)
- err("Set DTR error");
+ dev_err(&port->dev, "Set DTR error\n");
/* don't set RTS if using hardware flow control */
if (!(old_cflag & CRTSCTS))
if (BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST
, 1) < 0)
- err("Set RTS error");
+ dev_err(&port->dev, "Set RTS error\n");
}
}
@@ -403,18 +403,18 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
/* Report the actual baud rate back to the caller */
tty_encode_baud_rate(tty, baud, baud);
if (BSA_USB_CMD(BELKIN_SA_SET_BAUDRATE_REQUEST, urb_value) < 0)
- err("Set baudrate error");
+ dev_err(&port->dev, "Set baudrate error\n");
} else {
/* Disable flow control */
if (BSA_USB_CMD(BELKIN_SA_SET_FLOW_CTRL_REQUEST,
BELKIN_SA_FLOW_NONE) < 0)
- err("Disable flowcontrol error");
+ dev_err(&port->dev, "Disable flowcontrol error\n");
/* Drop RTS and DTR */
control_state &= ~(TIOCM_DTR | TIOCM_RTS);
if (BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, 0) < 0)
- err("DTR LOW error");
+ dev_err(&port->dev, "DTR LOW error\n");
if (BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST, 0) < 0)
- err("RTS LOW error");
+ dev_err(&port->dev, "RTS LOW error\n");
}
/* set the parity */
@@ -425,7 +425,7 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
else
urb_value = BELKIN_SA_PARITY_NONE;
if (BSA_USB_CMD(BELKIN_SA_SET_PARITY_REQUEST, urb_value) < 0)
- err("Set parity error");
+ dev_err(&port->dev, "Set parity error\n");
}
/* set the number of data bits */
@@ -448,7 +448,7 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
break;
}
if (BSA_USB_CMD(BELKIN_SA_SET_DATA_BITS_REQUEST, urb_value) < 0)
- err("Set data bits error");
+ dev_err(&port->dev, "Set data bits error\n");
}
/* set the number of stop bits */
@@ -457,7 +457,7 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
: BELKIN_SA_STOP_BITS(1);
if (BSA_USB_CMD(BELKIN_SA_SET_STOP_BITS_REQUEST,
urb_value) < 0)
- err("Set stop bits error");
+ dev_err(&port->dev, "Set stop bits error\n");
}
/* Set flow control */
@@ -478,7 +478,7 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
urb_value &= ~(BELKIN_SA_FLOW_IRTS);
if (BSA_USB_CMD(BELKIN_SA_SET_FLOW_CTRL_REQUEST, urb_value) < 0)
- err("Set flow control error");
+ dev_err(&port->dev, "Set flow control error\n");
}
/* save off the modified port settings */
@@ -494,7 +494,7 @@ static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state)
struct usb_serial *serial = port->serial;
if (BSA_USB_CMD(BELKIN_SA_SET_BREAK_REQUEST, break_state ? 1 : 0) < 0)
- err("Set break_ctl %d", break_state);
+ dev_err(&port->dev, "Set break_ctl %d\n", break_state);
}
@@ -554,13 +554,13 @@ static int belkin_sa_tiocmset(struct tty_struct *tty, struct file *file,
retval = BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST, rts);
if (retval < 0) {
- err("Set RTS error %d", retval);
+ dev_err(&port->dev, "Set RTS error %d\n", retval);
goto exit;
}
retval = BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, dtr);
if (retval < 0) {
- err("Set DTR error %d", retval);
+ dev_err(&port->dev, "Set DTR error %d\n", retval);
goto exit;
}
exit:
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 068680f9929d..858bdd038fbc 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -141,7 +141,8 @@ static int cyberjack_startup(struct usb_serial *serial)
result = usb_submit_urb(serial->port[i]->interrupt_in_urb,
GFP_KERNEL);
if (result)
- err(" usb_submit_urb(read int) failed");
+ dev_err(&serial->dev->dev,
+ "usb_submit_urb(read int) failed\n");
dbg("%s - usb_submit_urb(int urb)", __func__);
}
@@ -274,8 +275,9 @@ static int cyberjack_write(struct tty_struct *tty,
/* send the data out the bulk port */
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result) {
- err("%s - failed submitting write urb, error %d",
- __func__, result);
+ dev_err(&port->dev,
+ "%s - failed submitting write urb, error %d",
+ __func__, result);
/* Throw away data. No better idea what to do with it. */
priv->wrfilled = 0;
priv->wrsent = 0;
@@ -351,7 +353,9 @@ static void cyberjack_read_int_callback(struct urb *urb)
port->read_urb->dev = port->serial->dev;
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
- err("%s - failed resubmitting read urb, error %d", __func__, result);
+ dev_err(&port->dev, "%s - failed resubmitting "
+ "read urb, error %d\n",
+ __func__, result);
dbg("%s - usb_submit_urb(read urb)", __func__);
}
}
@@ -360,7 +364,7 @@ resubmit:
port->interrupt_in_urb->dev = port->serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result)
- err(" usb_submit_urb(read int) failed");
+ dev_err(&port->dev, "usb_submit_urb(read int) failed\n");
dbg("%s - usb_submit_urb(int urb)", __func__);
}
@@ -414,8 +418,8 @@ static void cyberjack_read_bulk_callback(struct urb *urb)
port->read_urb->dev = port->serial->dev;
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
- err("%s - failed resubmitting read urb, error %d",
- __func__, result);
+ dev_err(&port->dev, "%s - failed resubmitting read "
+ "urb, error %d\n", __func__, result);
dbg("%s - usb_submit_urb(read urb)", __func__);
}
}
@@ -462,8 +466,9 @@ static void cyberjack_write_bulk_callback(struct urb *urb)
/* send the data out the bulk port */
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result) {
- err("%s - failed submitting write urb, error %d",
- __func__, result);
+ dev_err(&port->dev,
+ "%s - failed submitting write urb, error %d\n",
+ __func__, result);
/* Throw away data. No better idea what to do with it. */
priv->wrfilled = 0;
priv->wrsent = 0;
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index e0ca809f75f5..eae4740d448c 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -404,8 +404,8 @@ static int cypress_serial_control(struct tty_struct *tty,
retval != -ENODEV);
if (retval != sizeof(feature_buffer)) {
- err("%s - failed sending serial line settings - %d",
- __func__, retval);
+ dev_err(&port->dev, "%s - failed sending serial "
+ "line settings - %d\n", __func__, retval);
cypress_set_dead(port);
} else {
spin_lock_irqsave(&priv->lock, flags);
@@ -443,7 +443,8 @@ static int cypress_serial_control(struct tty_struct *tty,
&& retval != -ENODEV);
if (retval != sizeof(feature_buffer)) {
- err("%s - failed to retrieve serial line settings - %d", __func__, retval);
+ dev_err(&port->dev, "%s - failed to retrieve serial "
+ "line settings - %d\n", __func__, retval);
cypress_set_dead(port);
return retval;
} else {
@@ -476,8 +477,8 @@ static void cypress_set_dead(struct usb_serial_port *port)
priv->comm_is_ok = 0;
spin_unlock_irqrestore(&priv->lock, flags);
- err("cypress_m8 suspending failing port %d - interval might be too short",
- port->number);
+ dev_err(&port->dev, "cypress_m8 suspending failing port %d - "
+ "interval might be too short\n", port->number);
}
@@ -679,7 +680,8 @@ static int cypress_open(struct tty_struct *tty,
/* setup the port and start reading from the device */
if (!port->interrupt_in_urb) {
- err("%s - interrupt_in_urb is empty!", __func__);
+ dev_err(&port->dev, "%s - interrupt_in_urb is empty!\n",
+ __func__);
return -1;
}
@@ -1107,8 +1109,8 @@ static void cypress_set_termios(struct tty_struct *tty,
data_bits = 3;
break;
default:
- err("%s - CSIZE was set, but not CS5-CS8",
- __func__);
+ dev_err(&port->dev, "%s - CSIZE was set, but not CS5-CS8\n",
+ __func__);
data_bits = 3;
}
spin_lock_irqsave(&priv->lock, flags);
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index ebc2918719a0..69f84f0ea6fe 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -661,7 +661,8 @@ static int digi_write_oob_command(struct usb_serial_port *port,
}
spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags);
if (ret)
- err("%s: usb_submit_urb failed, ret=%d", __func__, ret);
+ dev_err(&port->dev, "%s: usb_submit_urb failed, ret=%d\n",
+ __func__, ret);
return ret;
}
@@ -743,7 +744,8 @@ static int digi_write_inb_command(struct usb_serial_port *port,
spin_unlock_irqrestore(&priv->dp_port_lock, flags);
if (ret)
- err("%s: usb_submit_urb failed, ret=%d, port=%d",
+ dev_err(&port->dev,
+ "%s: usb_submit_urb failed, ret=%d, port=%d\n",
__func__, ret, priv->dp_port_num);
return ret;
}
@@ -812,7 +814,8 @@ static int digi_set_modem_signals(struct usb_serial_port *port,
spin_unlock(&port_priv->dp_port_lock);
spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags);
if (ret)
- err("%s: usb_submit_urb failed, ret=%d", __func__, ret);
+ dev_err(&port->dev, "%s: usb_submit_urb failed, ret=%d\n",
+ __func__, ret);
return ret;
}
@@ -907,7 +910,8 @@ static void digi_rx_unthrottle(struct tty_struct *tty)
spin_unlock_irqrestore(&priv->dp_port_lock, flags);
if (ret)
- err("%s: usb_submit_urb failed, ret=%d, port=%d",
+ dev_err(&port->dev,
+ "%s: usb_submit_urb failed, ret=%d, port=%d\n",
__func__, ret, priv->dp_port_num);
}
@@ -1214,7 +1218,8 @@ static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
/* return length of new data written, or error */
spin_unlock_irqrestore(&priv->dp_port_lock, flags);
if (ret < 0)
- err("%s: usb_submit_urb failed, ret=%d, port=%d",
+ dev_err(&port->dev,
+ "%s: usb_submit_urb failed, ret=%d, port=%d\n",
__func__, ret, priv->dp_port_num);
dbg("digi_write: returning %d", ret);
return ret;
@@ -1235,14 +1240,16 @@ static void digi_write_bulk_callback(struct urb *urb)
/* port and serial sanity check */
if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) {
- err("%s: port or port->private is NULL, status=%d",
- __func__, status);
+ dev_err(&port->dev,
+ "%s: port or port->private is NULL, status=%d\n",
+ __func__, status);
return;
}
serial = port->serial;
if (serial == NULL || (serial_priv = usb_get_serial_data(serial)) == NULL) {
- err("%s: serial or serial->private is NULL, status=%d",
- __func__, status);
+ dev_err(&port->dev,
+ "%s: serial or serial->private is NULL, status=%d\n",
+ __func__, status);
return;
}
@@ -1284,7 +1291,8 @@ static void digi_write_bulk_callback(struct urb *urb)
spin_unlock(&priv->dp_port_lock);
if (ret)
- err("%s: usb_submit_urb failed, ret=%d, port=%d",
+ dev_err(&port->dev,
+ "%s: usb_submit_urb failed, ret=%d, port=%d\n",
__func__, ret, priv->dp_port_num);
}
@@ -1518,8 +1526,9 @@ static int digi_startup_device(struct usb_serial *serial)
port->write_urb->dev = port->serial->dev;
ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (ret != 0) {
- err("%s: usb_submit_urb failed, ret=%d, port=%d",
- __func__, ret, i);
+ dev_err(&port->dev,
+ "%s: usb_submit_urb failed, ret=%d, port=%d\n",
+ __func__, ret, i);
break;
}
}
@@ -1618,22 +1627,26 @@ static void digi_read_bulk_callback(struct urb *urb)
dbg("digi_read_bulk_callback: TOP");
/* port sanity check, do not resubmit if port is not valid */
- if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) {
- err("%s: port or port->private is NULL, status=%d",
- __func__, status);
+ if (port == NULL)
+ return;
+ priv = usb_get_serial_port_data(port);
+ if (priv == NULL) {
+ dev_err(&port->dev, "%s: port->private is NULL, status=%d\n",
+ __func__, status);
return;
}
if (port->serial == NULL ||
(serial_priv = usb_get_serial_data(port->serial)) == NULL) {
- err("%s: serial is bad or serial->private is NULL, status=%d",
- __func__, status);
+ dev_err(&port->dev, "%s: serial is bad or serial->private "
+ "is NULL, status=%d\n", __func__, status);
return;
}
/* do not resubmit urb if it has any status error */
if (status) {
- err("%s: nonzero read bulk status: status=%d, port=%d",
- __func__, status, priv->dp_port_num);
+ dev_err(&port->dev,
+ "%s: nonzero read bulk status: status=%d, port=%d\n",
+ __func__, status, priv->dp_port_num);
return;
}
@@ -1650,8 +1663,9 @@ static void digi_read_bulk_callback(struct urb *urb)
urb->dev = port->serial->dev;
ret = usb_submit_urb(urb, GFP_ATOMIC);
if (ret != 0) {
- err("%s: failed resubmitting urb, ret=%d, port=%d",
- __func__, ret, priv->dp_port_num);
+ dev_err(&port->dev,
+ "%s: failed resubmitting urb, ret=%d, port=%d\n",
+ __func__, ret, priv->dp_port_num);
}
}
@@ -1687,10 +1701,11 @@ static int digi_read_inb_callback(struct urb *urb)
/* short/multiple packet check */
if (urb->actual_length != len + 2) {
- err("%s: INCOMPLETE OR MULTIPLE PACKET, urb->status=%d, "
- "port=%d, opcode=%d, len=%d, actual_length=%d, "
- "status=%d", __func__, status, priv->dp_port_num,
- opcode, len, urb->actual_length, port_status);
+ dev_err(&port->dev, "%s: INCOMPLETE OR MULTIPLE PACKET, "
+ "urb->status=%d, port=%d, opcode=%d, len=%d, "
+ "actual_length=%d, status=%d\n", __func__, status,
+ priv->dp_port_num, opcode, len, urb->actual_length,
+ port_status);
return -1;
}
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index fdd28e940bc1..8a69cce40b6d 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -416,7 +416,7 @@ static int empeg_startup(struct usb_serial *serial)
dbg("%s", __func__);
if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
- err("active config #%d != 1 ??",
+ dev_err(&serial->dev->dev, "active config #%d != 1 ??\n",
serial->dev->actconfig->desc.bConfigurationValue);
return -ENODEV;
}
@@ -499,15 +499,15 @@ static int __init empeg_init(void)
urb = usb_alloc_urb(0, GFP_KERNEL);
write_urb_pool[i] = urb;
if (urb == NULL) {
- err("No more urbs???");
+ printk(KERN_ERR "empeg: No more urbs???\n");
continue;
}
urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
GFP_KERNEL);
if (!urb->transfer_buffer) {
- err("%s - out of memory for urb buffers.",
- __func__);
+ printk(KERN_ERR "empeg: %s - out of memory for urb "
+ "buffers.", __func__);
continue;
}
}
diff --git a/drivers/usb/serial/ezusb.c b/drivers/usb/serial/ezusb.c
index 711e84f6ed82..3cfc762f5056 100644
--- a/drivers/usb/serial/ezusb.c
+++ b/drivers/usb/serial/ezusb.c
@@ -28,7 +28,8 @@ int ezusb_writememory(struct usb_serial *serial, int address,
/* dbg("ezusb_writememory %x, %d", address, length); */
if (!serial->dev) {
- err("%s - no physical device present, failing.", __func__);
+ printk(KERN_ERR "ezusb: %s - no physical device present, "
+ "failing.\n", __func__);
return -ENODEV;
}
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index bcadb1f4f5dd..51d7bdea2869 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1327,7 +1327,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL);
if (!priv) {
- err("%s- kmalloc(%Zd) failed.", __func__,
+ dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__,
sizeof(struct ftdi_private));
return -ENOMEM;
}
@@ -1524,8 +1524,9 @@ static int ftdi_open(struct tty_struct *tty,
ftdi_read_bulk_callback, port);
result = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (result)
- err("%s - failed submitting read urb, error %d",
- __func__, result);
+ dev_err(&port->dev,
+ "%s - failed submitting read urb, error %d\n",
+ __func__, result);
return result;
@@ -1559,7 +1560,7 @@ static void ftdi_close(struct tty_struct *tty,
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
0, priv->interface, buf, 0,
WDR_TIMEOUT) < 0) {
- err("error from flowcontrol urb");
+ dev_err(&port->dev, "error from flowcontrol urb\n");
}
/* drop RTS and DTR */
@@ -1624,14 +1625,15 @@ static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
buffer = kmalloc(transfer_size, GFP_ATOMIC);
if (!buffer) {
- err("%s ran out of kernel memory for urb ...", __func__);
+ dev_err(&port->dev,
+ "%s ran out of kernel memory for urb ...\n", __func__);
count = -ENOMEM;
goto error_no_buffer;
}
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
- err("%s - no more free urbs", __func__);
+ dev_err(&port->dev, "%s - no more free urbs\n", __func__);
count = -ENOMEM;
goto error_no_urb;
}
@@ -1675,8 +1677,9 @@ static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status) {
- err("%s - failed submitting write urb, error %d",
- __func__, status);
+ dev_err(&port->dev,
+ "%s - failed submitting write urb, error %d\n",
+ __func__, status);
count = status;
goto error;
} else {
@@ -1783,7 +1786,8 @@ static int ftdi_chars_in_buffer(struct tty_struct *tty)
buffered = (int)priv->tx_outstanding_bytes;
spin_unlock_irqrestore(&priv->tx_lock, flags);
if (buffered < 0) {
- err("%s outstanding tx bytes is negative!", __func__);
+ dev_err(&port->dev, "%s outstanding tx bytes is negative!\n",
+ __func__);
buffered = 0;
}
return buffered;
@@ -1799,11 +1803,12 @@ static void ftdi_read_bulk_callback(struct urb *urb)
int status = urb->status;
if (urb->number_of_packets > 0) {
- err("%s transfer_buffer_length %d actual_length %d number of packets %d",
- __func__,
- urb->transfer_buffer_length,
- urb->actual_length, urb->number_of_packets);
- err("%s transfer_flags %x ", __func__, urb->transfer_flags);
+ dev_err(&port->dev, "%s transfer_buffer_length %d "
+ "actual_length %d number of packets %d\n", __func__,
+ urb->transfer_buffer_length,
+ urb->actual_length, urb->number_of_packets);
+ dev_err(&port->dev, "%s transfer_flags %x\n", __func__,
+ urb->transfer_flags);
}
dbg("%s - port %d", __func__, port->number);
@@ -1824,7 +1829,7 @@ static void ftdi_read_bulk_callback(struct urb *urb)
}
if (urb != port->read_urb)
- err("%s - Not my urb!", __func__);
+ dev_err(&port->dev, "%s - Not my urb!\n", __func__);
if (status) {
/* This will happen at close every time so it is a dbg not an
@@ -1927,7 +1932,8 @@ static void ftdi_process_read(struct work_struct *work)
length = min(PKTSZ, urb->actual_length-packet_offset)-2;
if (length < 0) {
- err("%s - bad packet length: %d", __func__, length+2);
+ dev_err(&port->dev, "%s - bad packet length: %d\n",
+ __func__, length+2);
length = 0;
}
@@ -2042,8 +2048,9 @@ static void ftdi_process_read(struct work_struct *work)
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
- err("%s - failed resubmitting read urb, error %d",
- __func__, result);
+ dev_err(&port->dev,
+ "%s - failed resubmitting read urb, error %d\n",
+ __func__, result);
}
out:
tty_kref_put(tty);
@@ -2072,8 +2079,8 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
FTDI_SIO_SET_DATA_REQUEST_TYPE,
urb_value , priv->interface,
buf, 0, WDR_TIMEOUT) < 0) {
- err("%s FAILED to enable/disable break state (state was %d)",
- __func__, break_state);
+ dev_err(&port->dev, "%s FAILED to enable/disable break state "
+ "(state was %d)\n", __func__, break_state);
}
dbg("%s break state is %d - urb is %d", __func__,
@@ -2145,7 +2152,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
case CS7: urb_value |= 7; dbg("Setting CS7"); break;
case CS8: urb_value |= 8; dbg("Setting CS8"); break;
default:
- err("CSIZE was set but not CS5-CS8");
+ dev_err(&port->dev, "CSIZE was set but not CS5-CS8\n");
}
}
@@ -2158,7 +2165,8 @@ static void ftdi_set_termios(struct tty_struct *tty,
FTDI_SIO_SET_DATA_REQUEST_TYPE,
urb_value , priv->interface,
buf, 0, WDR_SHORT_TIMEOUT) < 0) {
- err("%s FAILED to set databits/stopbits/parity", __func__);
+ dev_err(&port->dev, "%s FAILED to set "
+ "databits/stopbits/parity\n", __func__);
}
/* Now do the baudrate */
@@ -2169,14 +2177,17 @@ static void ftdi_set_termios(struct tty_struct *tty,
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
0, priv->interface,
buf, 0, WDR_TIMEOUT) < 0) {
- err("%s error from disable flowcontrol urb", __func__);
+ dev_err(&port->dev,
+ "%s error from disable flowcontrol urb\n",
+ __func__);
}
/* Drop RTS and DTR */
clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
} else {
/* set the baudrate determined before */
if (change_speed(tty, port))
- err("%s urb failed to set baudrate", __func__);
+ dev_err(&port->dev, "%s urb failed to set baudrate\n",
+ __func__);
/* Ensure RTS and DTR are raised when baudrate changed from 0 */
if (!old_termios || (old_termios->c_cflag & CBAUD) == B0)
set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
@@ -2192,7 +2203,8 @@ static void ftdi_set_termios(struct tty_struct *tty,
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
0 , (FTDI_SIO_RTS_CTS_HS | priv->interface),
buf, 0, WDR_TIMEOUT) < 0) {
- err("urb failed to set to rts/cts flow control");
+ dev_err(&port->dev,
+ "urb failed to set to rts/cts flow control\n");
}
} else {
@@ -2223,7 +2235,8 @@ static void ftdi_set_termios(struct tty_struct *tty,
urb_value , (FTDI_SIO_XON_XOFF_HS
| priv->interface),
buf, 0, WDR_TIMEOUT) < 0) {
- err("urb failed to set to xon/xoff flow control");
+ dev_err(&port->dev, "urb failed to set to "
+ "xon/xoff flow control\n");
}
} else {
/* else clause to only run if cflag ! CRTSCTS and iflag
@@ -2236,7 +2249,8 @@ static void ftdi_set_termios(struct tty_struct *tty,
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
0, priv->interface,
buf, 0, WDR_TIMEOUT) < 0) {
- err("urb failed to clear flow control");
+ dev_err(&port->dev,
+ "urb failed to clear flow control\n");
}
}
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index eb95efdfbe8b..e85c8c0d1ad9 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -3109,13 +3109,13 @@ static int edge_startup(struct usb_serial *serial)
edge_serial->interrupt_read_urb =
usb_alloc_urb(0, GFP_KERNEL);
if (!edge_serial->interrupt_read_urb) {
- err("out of memory");
+ dev_err(&dev->dev, "out of memory\n");
return -ENOMEM;
}
edge_serial->interrupt_in_buffer =
kmalloc(buffer_size, GFP_KERNEL);
if (!edge_serial->interrupt_in_buffer) {
- err("out of memory");
+ dev_err(&dev->dev, "out of memory\n");
usb_free_urb(edge_serial->interrupt_read_urb);
return -ENOMEM;
}
@@ -3146,13 +3146,13 @@ static int edge_startup(struct usb_serial *serial)
edge_serial->read_urb =
usb_alloc_urb(0, GFP_KERNEL);
if (!edge_serial->read_urb) {
- err("out of memory");
+ dev_err(&dev->dev, "out of memory\n");
return -ENOMEM;
}
edge_serial->bulk_in_buffer =
kmalloc(buffer_size, GFP_KERNEL);
if (!edge_serial->bulk_in_buffer) {
- err("out of memory");
+ dev_err(&dev->dev, "out of memory\n");
usb_free_urb(edge_serial->read_urb);
return -ENOMEM;
}
@@ -3181,7 +3181,8 @@ static int edge_startup(struct usb_serial *serial)
}
if (!interrupt_in_found || !bulk_in_found || !bulk_out_found) {
- err("Error - the proper endpoints were not found!");
+ dev_err(&dev->dev, "Error - the proper endpoints "
+ "were not found!\n");
return -ENODEV;
}
@@ -3190,8 +3191,9 @@ static int edge_startup(struct usb_serial *serial)
response = usb_submit_urb(edge_serial->interrupt_read_urb,
GFP_KERNEL);
if (response)
- err("%s - Error %d submitting control urb",
- __func__, response);
+ dev_err(&dev->dev,
+ "%s - Error %d submitting control urb\n",
+ __func__, response);
}
return response;
}
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 5108cbc64a55..132be74d2b89 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -608,7 +608,7 @@ static int ipaq_open(struct tty_struct *tty,
bytes_out = 0;
priv = kmalloc(sizeof(struct ipaq_private), GFP_KERNEL);
if (priv == NULL) {
- err("%s - Out of memory", __func__);
+ dev_err(&port->dev, "%s - Out of memory\n", __func__);
return -ENOMEM;
}
usb_set_serial_port_data(port, priv);
@@ -693,8 +693,7 @@ static int ipaq_open(struct tty_struct *tty,
}
if (!retries && result) {
- err("%s - failed doing control urb, error %d", __func__,
- result);
+ dev_err(&port->dev, "%s - failed doing control urb, error %d\n", __func__, result);
goto error;
}
@@ -707,8 +706,9 @@ static int ipaq_open(struct tty_struct *tty,
result = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (result) {
- err("%s - failed submitting read urb, error %d",
- __func__, result);
+ dev_err(&port->dev,
+ "%s - failed submitting read urb, error %d\n",
+ __func__, result);
goto error;
}
@@ -716,7 +716,7 @@ static int ipaq_open(struct tty_struct *tty,
enomem:
result = -ENOMEM;
- err("%s - Out of memory", __func__);
+ dev_err(&port->dev, "%s - Out of memory\n", __func__);
error:
ipaq_destroy_lists(port);
kfree(priv);
@@ -781,8 +781,9 @@ static void ipaq_read_bulk_callback(struct urb *urb)
ipaq_read_bulk_callback, port);
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
- err("%s - failed resubmitting read urb, error %d",
- __func__, result);
+ dev_err(&port->dev,
+ "%s - failed resubmitting read urb, error %d\n",
+ __func__, result);
return;
}
@@ -847,7 +848,8 @@ static int ipaq_write_bulk(struct usb_serial_port *port,
spin_unlock_irqrestore(&write_list_lock, flags);
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result)
- err("%s - failed submitting write urb, error %d",
+ dev_err(&port->dev,
+ "%s - failed submitting write urb, error %d\n",
__func__, result);
} else {
spin_unlock_irqrestore(&write_list_lock, flags);
@@ -909,8 +911,9 @@ static void ipaq_write_bulk_callback(struct urb *urb)
spin_unlock_irqrestore(&write_list_lock, flags);
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result)
- err("%s - failed submitting write urb, error %d",
- __func__, result);
+ dev_err(&port->dev,
+ "%s - failed submitting write urb, error %d\n",
+ __func__, result);
} else {
priv->active = 0;
spin_unlock_irqrestore(&write_list_lock, flags);
@@ -957,7 +960,7 @@ static int ipaq_startup(struct usb_serial *serial)
{
dbg("%s", __func__);
if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
- err("active config #%d != 1 ??",
+ dev_err(&serial->dev->dev, "active config #%d != 1 ??\n",
serial->dev->actconfig->desc.bConfigurationValue);
return -ENODEV;
}
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 2928ba844394..bf1ae247da66 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -742,11 +742,13 @@ static int keyspan_pda_fake_startup(struct usb_serial *serial)
fw_name = "keyspan_pda/xircom_pgs.fw";
#endif
else {
- err("%s: unknown vendor, aborting.", __func__);
+ dev_err(&serial->dev->dev, "%s: unknown vendor, aborting.\n",
+ __func__);
return -ENODEV;
}
if (request_ihex_firmware(&fw, fw_name, &serial->dev->dev)) {
- err("failed to load firmware \"%s\"\n", fw_name);
+ dev_err(&serial->dev->dev, "failed to load firmware \"%s\"\n",
+ fw_name);
return -ENOENT;
}
record = (const struct ihex_binrec *)fw->data;
@@ -756,10 +758,10 @@ static int keyspan_pda_fake_startup(struct usb_serial *serial)
(unsigned char *)record->data,
be16_to_cpu(record->len), 0xa0);
if (response < 0) {
- err("ezusb_writememory failed for Keyspan PDA "
- "firmware (%d %04X %p %d)",
- response, be32_to_cpu(record->addr),
- record->data, be16_to_cpu(record->len));
+ dev_err(&serial->dev->dev, "ezusb_writememory failed "
+ "for Keyspan PDA firmware (%d %04X %p %d)\n",
+ response, be32_to_cpu(record->addr),
+ record->data, be16_to_cpu(record->len));
break;
}
record = ihex_next_binrec(record);
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 573c6972fae7..dc36a052766f 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -182,7 +182,8 @@ static int klsi_105_chg_port_settings(struct usb_serial_port *port,
sizeof(struct klsi_105_port_settings),
KLSI_TIMEOUT);
if (rc < 0)
- err("Change port settings failed (error = %d)", rc);
+ dev_err(&port->dev,
+ "Change port settings failed (error = %d)\n", rc);
dev_info(&port->serial->dev->dev,
"%d byte block, baudrate %x, databits %d, u1 %d, u2 %d\n",
settings->pktlen, settings->baudrate, settings->databits,
@@ -225,7 +226,8 @@ static int klsi_105_get_line_state(struct usb_serial_port *port,
10000
);
if (rc < 0)
- err("Reading line status failed (error = %d)", rc);
+ dev_err(&port->dev, "Reading line status failed (error = %d)\n",
+ rc);
else {
status = get_unaligned_le16(status_buf);
@@ -279,15 +281,16 @@ static int klsi_105_startup(struct usb_serial *serial)
priv->write_urb_pool[j] = urb;
if (urb == NULL) {
- err("No more urbs???");
+ dev_err(&serial->dev->dev, "No more urbs???\n");
goto err_cleanup;
}
urb->transfer_buffer =
kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
if (!urb->transfer_buffer) {
- err("%s - out of memory for urb buffers.",
- __func__);
+ dev_err(&serial->dev->dev,
+ "%s - out of memory for urb buffers.\n",
+ __func__);
goto err_cleanup;
}
}
@@ -408,7 +411,8 @@ static int klsi_105_open(struct tty_struct *tty,
rc = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (rc) {
- err("%s - failed submitting read urb, error %d", __func__, rc);
+ dev_err(&port->dev, "%s - failed submitting read urb, "
+ "error %d\n", __func__, rc);
retval = rc;
goto exit;
}
@@ -423,7 +427,7 @@ static int klsi_105_open(struct tty_struct *tty,
0,
KLSI_TIMEOUT);
if (rc < 0) {
- err("Enabling read failed (error = %d)", rc);
+ dev_err(&port->dev, "Enabling read failed (error = %d)\n", rc);
retval = rc;
} else
dbg("%s - enabled reading", __func__);
@@ -463,7 +467,8 @@ static void klsi_105_close(struct tty_struct *tty,
NULL, 0,
KLSI_TIMEOUT);
if (rc < 0)
- err("Disabling read failed (error = %d)", rc);
+ dev_err(&port->dev,
+ "Disabling read failed (error = %d)\n", rc);
}
mutex_unlock(&port->serial->disc_mutex);
@@ -522,7 +527,9 @@ static int klsi_105_write(struct tty_struct *tty,
urb->transfer_buffer =
kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC);
if (urb->transfer_buffer == NULL) {
- err("%s - no more kernel memory...", __func__);
+ dev_err(&port->dev,
+ "%s - no more kernel memory...\n",
+ __func__);
goto exit;
}
}
@@ -549,8 +556,9 @@ static int klsi_105_write(struct tty_struct *tty,
/* send the data out the bulk port */
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result) {
- err("%s - failed submitting write urb, error %d",
- __func__, result);
+ dev_err(&port->dev,
+ "%s - failed submitting write urb, error %d\n",
+ __func__, result);
goto exit;
}
buf += size;
@@ -694,8 +702,9 @@ static void klsi_105_read_bulk_callback(struct urb *urb)
port);
rc = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (rc)
- err("%s - failed resubmitting read urb, error %d",
- __func__, rc);
+ dev_err(&port->dev,
+ "%s - failed resubmitting read urb, error %d\n",
+ __func__, rc);
} /* klsi_105_read_bulk_callback */
@@ -799,7 +808,8 @@ static void klsi_105_set_termios(struct tty_struct *tty,
priv->cfg.databits = kl5kusb105a_dtb_8;
break;
default:
- err("CSIZE was not CS5-CS8, using default of 8");
+ dev_err(&port->dev,
+ "CSIZE was not CS5-CS8, using default of 8\n");
priv->cfg.databits = kl5kusb105a_dtb_8;
break;
}
@@ -886,7 +896,8 @@ static int klsi_105_tiocmget(struct tty_struct *tty, struct file *file)
rc = klsi_105_get_line_state(port, &line_state);
if (rc < 0) {
- err("Reading line control failed (error = %d)", rc);
+ dev_err(&port->dev,
+ "Reading line control failed (error = %d)\n", rc);
/* better return value? EAGAIN? */
return rc;
}
@@ -944,8 +955,9 @@ static void klsi_105_unthrottle(struct tty_struct *tty)
port->read_urb->dev = port->serial->dev;
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
- err("%s - failed submitting read urb, error %d", __func__,
- result);
+ dev_err(&port->dev,
+ "%s - failed submitting read urb, error %d\n",
+ __func__, result);
}
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 29fa66ea2d21..07710cf31d0d 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -246,7 +246,8 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty,
0, 0, &divisor, MCT_U232_SET_BAUD_RATE_SIZE,
WDR_TIMEOUT);
if (rc < 0) /*FIXME: What value speed results */
- err("Set BAUD RATE %d failed (error = %d)", value, rc);
+ dev_err(&port->dev, "Set BAUD RATE %d failed (error = %d)\n",
+ value, rc);
else
tty_encode_baud_rate(tty, speed, speed);
dbg("set_baud_rate: value: 0x%x, divisor: 0x%x", value, divisor);
@@ -274,8 +275,9 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty,
0, 0, &zero_byte, MCT_U232_SET_UNKNOWN1_SIZE,
WDR_TIMEOUT);
if (rc < 0)
- err("Sending USB device request code %d failed (error = %d)",
- MCT_U232_SET_UNKNOWN1_REQUEST, rc);
+ dev_err(&port->dev, "Sending USB device request code %d "
+ "failed (error = %d)\n", MCT_U232_SET_UNKNOWN1_REQUEST,
+ rc);
if (port && C_CRTSCTS(tty))
cts_enable_byte = 1;
@@ -288,8 +290,8 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty,
0, 0, &cts_enable_byte, MCT_U232_SET_CTS_SIZE,
WDR_TIMEOUT);
if (rc < 0)
- err("Sending USB device request code %d failed (error = %d)",
- MCT_U232_SET_CTS_REQUEST, rc);
+ dev_err(&port->dev, "Sending USB device request code %d "
+ "failed (error = %d)\n", MCT_U232_SET_CTS_REQUEST, rc);
return rc;
} /* mct_u232_set_baud_rate */
@@ -303,7 +305,8 @@ static int mct_u232_set_line_ctrl(struct usb_serial *serial, unsigned char lcr)
0, 0, &lcr, MCT_U232_SET_LINE_CTRL_SIZE,
WDR_TIMEOUT);
if (rc < 0)
- err("Set LINE CTRL 0x%x failed (error = %d)", lcr, rc);
+ dev_err(&serial->dev->dev,
+ "Set LINE CTRL 0x%x failed (error = %d)\n", lcr, rc);
dbg("set_line_ctrl: 0x%x", lcr);
return rc;
} /* mct_u232_set_line_ctrl */
@@ -325,7 +328,8 @@ static int mct_u232_set_modem_ctrl(struct usb_serial *serial,
0, 0, &mcr, MCT_U232_SET_MODEM_CTRL_SIZE,
WDR_TIMEOUT);
if (rc < 0)
- err("Set MODEM CTRL 0x%x failed (error = %d)", mcr, rc);
+ dev_err(&serial->dev->dev,
+ "Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc);
dbg("set_modem_ctrl: state=0x%x ==> mcr=0x%x", control_state, mcr);
return rc;
@@ -341,7 +345,8 @@ static int mct_u232_get_modem_stat(struct usb_serial *serial,
0, 0, msr, MCT_U232_GET_MODEM_STAT_SIZE,
WDR_TIMEOUT);
if (rc < 0) {
- err("Get MODEM STATus failed (error = %d)", rc);
+ dev_err(&serial->dev->dev,
+ "Get MODEM STATus failed (error = %d)\n", rc);
*msr = 0;
}
dbg("get_modem_stat: 0x%x", *msr);
@@ -470,8 +475,9 @@ static int mct_u232_open(struct tty_struct *tty,
port->read_urb->dev = port->serial->dev;
retval = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (retval) {
- err("usb_submit_urb(read bulk) failed pipe 0x%x err %d",
- port->read_urb->pipe, retval);
+ dev_err(&port->dev,
+ "usb_submit_urb(read bulk) failed pipe 0x%x err %d\n",
+ port->read_urb->pipe, retval);
goto error;
}
@@ -479,8 +485,9 @@ static int mct_u232_open(struct tty_struct *tty,
retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (retval) {
usb_kill_urb(port->read_urb);
- err(" usb_submit_urb(read int) failed pipe 0x%x err %d",
- port->interrupt_in_urb->pipe, retval);
+ dev_err(&port->dev,
+ "usb_submit_urb(read int) failed pipe 0x%x err %d",
+ port->interrupt_in_urb->pipe, retval);
goto error;
}
return 0;
@@ -612,8 +619,9 @@ static void mct_u232_read_int_callback(struct urb *urb)
exit:
retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval)
- err("%s - usb_submit_urb failed with result %d",
- __func__, retval);
+ dev_err(&port->dev,
+ "%s - usb_submit_urb failed with result %d\n",
+ __func__, retval);
} /* mct_u232_read_int_callback */
static void mct_u232_set_termios(struct tty_struct *tty,
@@ -680,7 +688,8 @@ static void mct_u232_set_termios(struct tty_struct *tty,
case CS8:
last_lcr |= MCT_U232_DATA_BITS_8; break;
default:
- err("CSIZE was not CS5-CS8, using default of 8");
+ dev_err(&port->dev,
+ "CSIZE was not CS5-CS8, using default of 8\n");
last_lcr |= MCT_U232_DATA_BITS_8;
break;
}
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 5711aa55d24b..e772cc0a97fd 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -355,14 +355,16 @@ static int mos7720_open(struct tty_struct *tty,
mos7720_port->write_urb_pool[j] = urb;
if (urb == NULL) {
- err("No more urbs???");
+ dev_err(&port->dev, "No more urbs???\n");
continue;
}
urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
GFP_KERNEL);
if (!urb->transfer_buffer) {
- err("%s-out of memory for urb buffers.", __func__);
+ dev_err(&port->dev,
+ "%s-out of memory for urb buffers.\n",
+ __func__);
usb_free_urb(mos7720_port->write_urb_pool[j]);
mos7720_port->write_urb_pool[j] = NULL;
continue;
@@ -694,7 +696,8 @@ static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port,
urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
GFP_KERNEL);
if (urb->transfer_buffer == NULL) {
- err("%s no more kernel memory...", __func__);
+ dev_err(&port->dev, "%s no more kernel memory...\n",
+ __func__);
goto exit;
}
}
@@ -714,8 +717,8 @@ static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port,
/* send it down the pipe */
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status) {
- err("%s - usb_submit_urb(write bulk) failed with status = %d",
- __func__, status);
+ dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed "
+ "with status = %d\n", __func__, status);
bytes_sent = status;
goto exit;
}
@@ -975,7 +978,7 @@ static int send_cmd_write_baud_rate(struct moschip_port *mos7720_port,
/* Calculate the Divisor */
status = calc_baud_rate_divisor(baudrate, &divisor);
if (status) {
- err("%s - bad baud rate", __func__);
+ dev_err(&port->dev, "%s - bad baud rate\n", __func__);
return status;
}
@@ -1478,7 +1481,7 @@ static int mos7720_startup(struct usb_serial *serial)
/* create our private serial structure */
mos7720_serial = kzalloc(sizeof(struct moschip_serial), GFP_KERNEL);
if (mos7720_serial == NULL) {
- err("%s - Out of memory", __func__);
+ dev_err(&dev->dev, "%s - Out of memory\n", __func__);
return -ENOMEM;
}
@@ -1491,7 +1494,7 @@ static int mos7720_startup(struct usb_serial *serial)
for (i = 0; i < serial->num_ports; ++i) {
mos7720_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
if (mos7720_port == NULL) {
- err("%s - Out of memory", __func__);
+ dev_err(&dev->dev, "%s - Out of memory\n", __func__);
usb_set_serial_data(serial, NULL);
kfree(mos7720_serial);
return -ENOMEM;
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index d5f682626e71..fda4a6421c44 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -844,7 +844,7 @@ static int mos7840_open(struct tty_struct *tty,
mos7840_port->write_urb_pool[j] = urb;
if (urb == NULL) {
- err("No more urbs???");
+ dev_err(&port->dev, "No more urbs???\n");
continue;
}
@@ -853,7 +853,9 @@ static int mos7840_open(struct tty_struct *tty,
if (!urb->transfer_buffer) {
usb_free_urb(urb);
mos7840_port->write_urb_pool[j] = NULL;
- err("%s-out of memory for urb buffers.", __func__);
+ dev_err(&port->dev,
+ "%s-out of memory for urb buffers.\n",
+ __func__);
continue;
}
}
@@ -1021,8 +1023,8 @@ static int mos7840_open(struct tty_struct *tty,
usb_submit_urb(serial->port[0]->interrupt_in_urb,
GFP_KERNEL);
if (response) {
- err("%s - Error %d submitting interrupt urb",
- __func__, response);
+ dev_err(&port->dev, "%s - Error %d submitting "
+ "interrupt urb\n", __func__, response);
}
}
@@ -1055,8 +1057,8 @@ static int mos7840_open(struct tty_struct *tty,
port->bulk_in_endpointAddress);
response = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL);
if (response) {
- err("%s - Error %d submitting control urb", __func__,
- response);
+ dev_err(&port->dev, "%s - Error %d submitting control urb\n",
+ __func__, response);
}
/* initialize our wait queues */
@@ -1492,7 +1494,8 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
if (urb->transfer_buffer == NULL) {
- err("%s no more kernel memory...", __func__);
+ dev_err(&port->dev, "%s no more kernel memory...\n",
+ __func__);
goto exit;
}
}
@@ -1517,8 +1520,8 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
if (status) {
mos7840_port->busy[i] = 0;
- err("%s - usb_submit_urb(write bulk) failed with status = %d",
- __func__, status);
+ dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed "
+ "with status = %d\n", __func__, status);
bytes_sent = status;
goto exit;
}
@@ -1856,8 +1859,7 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
/* Calculate the Divisor */
if (status) {
- err("%s - bad baud rate", __func__);
- dbg("%s\n", "bad baud rate");
+ dev_err(&port->dev, "%s - bad baud rate\n", __func__);
return status;
}
/* Enable access to divisor latch */
@@ -2446,7 +2448,7 @@ static int mos7840_startup(struct usb_serial *serial)
for (i = 0; i < serial->num_ports; ++i) {
mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
if (mos7840_port == NULL) {
- err("%s - Out of memory", __func__);
+ dev_err(&dev->dev, "%s - Out of memory\n", __func__);
status = -ENOMEM;
i--; /* don't follow NULL pointer cleaning up */
goto error;
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 9890f26cd91d..df6539712726 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -154,8 +154,8 @@ static int omninet_attach(struct usb_serial *serial)
od = kmalloc(sizeof(struct omninet_data), GFP_KERNEL);
if (!od) {
- err("%s- kmalloc(%Zd) failed.",
- __func__, sizeof(struct omninet_data));
+ dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n",
+ __func__, sizeof(struct omninet_data));
return -ENOMEM;
}
usb_set_serial_port_data(port, od);
@@ -183,8 +183,9 @@ static int omninet_open(struct tty_struct *tty,
omninet_read_bulk_callback, port);
result = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (result)
- err("%s - failed submitting read urb, error %d",
- __func__, result);
+ dev_err(&port->dev,
+ "%s - failed submitting read urb, error %d\n",
+ __func__, result);
return result;
}
@@ -244,8 +245,9 @@ static void omninet_read_bulk_callback(struct urb *urb)
omninet_read_bulk_callback, port);
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result)
- err("%s - failed resubmitting read urb, error %d",
- __func__, result);
+ dev_err(&port->dev,
+ "%s - failed resubmitting read urb, error %d\n",
+ __func__, result);
return;
}
@@ -298,8 +300,9 @@ static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
result = usb_submit_urb(wport->write_urb, GFP_ATOMIC);
if (result) {
wport->write_urb_busy = 0;
- err("%s - failed submitting write urb, error %d",
- __func__, result);
+ dev_err(&port->dev,
+ "%s - failed submitting write urb, error %d\n",
+ __func__, result);
} else
result = count;
diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
index 40cff61cb4a2..4b463cd140ef 100644
--- a/drivers/usb/serial/safe_serial.c
+++ b/drivers/usb/serial/safe_serial.c
@@ -256,11 +256,12 @@ static void safe_read_bulk_callback(struct urb *urb)
data, actual_length);
tty_flip_buffer_push(tty);
} else {
- err("%s - inconsistent lengths %d:%d",
+ dev_err(&port->dev,
+ "%s - inconsistent lengths %d:%d\n",
__func__, actual_length, length);
}
} else {
- err("%s - bad CRC %x", __func__, fcs);
+ dev_err(&port->dev, "%s - bad CRC %x\n", __func__, fcs);
}
} else {
tty_insert_flip_string(tty, data, length);
@@ -277,8 +278,9 @@ static void safe_read_bulk_callback(struct urb *urb)
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result)
- err("%s - failed resubmitting read urb, error %d",
- __func__, result);
+ dev_err(&port->dev,
+ "%s - failed resubmitting read urb, error %d\n",
+ __func__, result);
/* FIXME: Need a mechanism to retry later if this happens */
}
@@ -369,8 +371,9 @@ static int safe_write(struct tty_struct *tty, struct usb_serial_port *port,
result = usb_submit_urb(port->write_urb, GFP_KERNEL);
if (result) {
port->write_urb_busy = 0;
- err("%s - failed submitting write urb, error %d",
- __func__, result);
+ dev_err(&port->dev,
+ "%s - failed submitting write urb, error %d\n",
+ __func__, result);
return 0;
}
dbg("%s urb: %p submitted", __func__, port->write_urb);
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 96aeec746191..a65bc2bd8e71 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -589,8 +589,8 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
case 1000000:
buf[0] = 0x0b; break;
default:
- err("spcp825 driver does not support the baudrate "
- "requested, using default of 9600.");
+ dev_err(&port->dev, "spcp825 driver does not support the "
+ "baudrate requested, using default of 9600.\n");
}
/* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */
@@ -629,7 +629,8 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
SET_UART_FORMAT_TYPE, SET_UART_FORMAT,
uartdata, 0, NULL, 0, 100);
if (i < 0)
- err("Set UART format %#x failed (error = %d)", uartdata, i);
+ dev_err(&port->dev, "Set UART format %#x failed (error = %d)\n",
+ uartdata, i);
dbg("0x21:0x40:0:0 %d\n", i);
if (cflag & CRTSCTS) {
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 92ba4f7361e4..8be3f39891c7 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1121,7 +1121,8 @@ static int __init usb_serial_init(void)
result = bus_register(&usb_serial_bus_type);
if (result) {
- err("%s - registering bus driver failed", __func__);
+ printk(KERN_ERR "usb-serial: %s - registering bus driver "
+ "failed\n", __func__);
goto exit_bus;
}
@@ -1142,21 +1143,24 @@ static int __init usb_serial_init(void)
tty_set_operations(usb_serial_tty_driver, &serial_ops);
result = tty_register_driver(usb_serial_tty_driver);
if (result) {
- err("%s - tty_register_driver failed", __func__);
+ printk(KERN_ERR "usb-serial: %s - tty_register_driver failed\n",
+ __func__);
goto exit_reg_driver;
}
/* register the USB driver */
result = usb_register(&usb_serial_driver);
if (result < 0) {
- err("%s - usb_register failed", __func__);
+ printk(KERN_ERR "usb-serial: %s - usb_register failed\n",
+ __func__);
goto exit_tty;
}
/* register the generic driver, if we should */
result = usb_serial_generic_register(debug);
if (result < 0) {
- err("%s - registering generic driver failed", __func__);
+ printk(KERN_ERR "usb-serial: %s - registering generic "
+ "driver failed\n", __func__);
goto exit_generic;
}
@@ -1174,7 +1178,8 @@ exit_reg_driver:
bus_unregister(&usb_serial_bus_type);
exit_bus:
- err("%s - returning with error %d", __func__, result);
+ printk(KERN_ERR "usb-serial: %s - returning with error %d\n",
+ __func__, result);
put_tty_driver(usb_serial_tty_driver);
return result;
}
@@ -1233,8 +1238,8 @@ int usb_serial_register(struct usb_serial_driver *driver)
retval = usb_serial_bus_register(driver);
if (retval) {
- err("problem %d when registering driver %s",
- retval, driver->description);
+ printk(KERN_ERR "usb-serial: problem %d when registering "
+ "driver %s\n", retval, driver->description);
list_del(&driver->driver_list);
} else
printk(KERN_INFO "USB Serial support registered for %s\n",
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index de4b5f0e7f3d..4facce3d9364 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -768,7 +768,7 @@ static int visor_probe(struct usb_serial *serial,
dbg("%s", __func__);
if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
- err("active config #%d != 1 ??",
+ dev_err(&serial->dev->dev, "active config #%d != 1 ??\n",
serial->dev->actconfig->desc.bConfigurationValue);
return -ENODEV;
}
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 39f7f8d291d6..5335d3211c07 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -303,12 +303,15 @@ static int whiteheat_firmware_download(struct usb_serial *serial,
if (request_ihex_firmware(&firmware_fw, "whiteheat.fw",
&serial->dev->dev)) {
- err("%s - request \"whiteheat.fw\" failed", __func__);
+ dev_err(&serial->dev->dev,
+ "%s - request \"whiteheat.fw\" failed\n", __func__);
goto out;
}
if (request_ihex_firmware(&loader_fw, "whiteheat_loader.fw",
&serial->dev->dev)) {
- err("%s - request \"whiteheat_loader.fw\" failed", __func__);
+ dev_err(&serial->dev->dev,
+ "%s - request \"whiteheat_loader.fw\" failed\n",
+ __func__);
goto out;
}
ret = 0;
@@ -320,9 +323,10 @@ static int whiteheat_firmware_download(struct usb_serial *serial,
(unsigned char *)record->data,
be16_to_cpu(record->len), 0xa0);
if (response < 0) {
- err("%s - ezusb_writememory failed for loader (%d %04X %p %d)",
- __func__, response, be32_to_cpu(record->addr),
- record->data, be16_to_cpu(record->len));
+ dev_err(&serial->dev->dev, "%s - ezusb_writememory "
+ "failed for loader (%d %04X %p %d)\n",
+ __func__, response, be32_to_cpu(record->addr),
+ record->data, be16_to_cpu(record->len));
break;
}
record = ihex_next_binrec(record);
@@ -338,9 +342,11 @@ static int whiteheat_firmware_download(struct usb_serial *serial,
(unsigned char *)record->data,
be16_to_cpu(record->len), 0xa3);
if (response < 0) {
- err("%s - ezusb_writememory failed for first firmware step (%d %04X %p %d)",
- __func__, response, be32_to_cpu(record->addr),
- record->data, be16_to_cpu(record->len));
+ dev_err(&serial->dev->dev, "%s - ezusb_writememory "
+ "failed for first firmware step "
+ "(%d %04X %p %d)\n", __func__, response,
+ be32_to_cpu(record->addr), record->data,
+ be16_to_cpu(record->len));
break;
}
++record;
@@ -354,9 +360,11 @@ static int whiteheat_firmware_download(struct usb_serial *serial,
(unsigned char *)record->data,
be16_to_cpu(record->len), 0xa0);
if (response < 0) {
- err("%s - ezusb_writememory failed for second firmware step (%d %04X %p %d)",
- __func__, response, be32_to_cpu(record->addr),
- record->data, be16_to_cpu(record->len));
+ dev_err(&serial->dev->dev, "%s - ezusb_writememory "
+ "failed for second firmware step "
+ "(%d %04X %p %d)\n", __func__, response,
+ be32_to_cpu(record->addr), record->data,
+ be16_to_cpu(record->len));
break;
}
++record;
@@ -421,12 +429,12 @@ static int whiteheat_attach(struct usb_serial *serial)
ret = usb_bulk_msg(serial->dev, pipe, command, 2,
&alen, COMMAND_TIMEOUT_MS);
if (ret) {
- err("%s: Couldn't send command [%d]",
- serial->type->description, ret);
+ dev_err(&serial->dev->dev, "%s: Couldn't send command [%d]\n",
+ serial->type->description, ret);
goto no_firmware;
} else if (alen != 2) {
- err("%s: Send command incomplete [%d]",
- serial->type->description, alen);
+ dev_err(&serial->dev->dev, "%s: Send command incomplete [%d]\n",
+ serial->type->description, alen);
goto no_firmware;
}
@@ -437,16 +445,16 @@ static int whiteheat_attach(struct usb_serial *serial)
ret = usb_bulk_msg(serial->dev, pipe, result,
sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS);
if (ret) {
- err("%s: Couldn't get results [%d]",
- serial->type->description, ret);
+ dev_err(&serial->dev->dev, "%s: Couldn't get results [%d]\n",
+ serial->type->description, ret);
goto no_firmware;
} else if (alen != sizeof(*hw_info) + 1) {
- err("%s: Get results incomplete [%d]",
- serial->type->description, alen);
+ dev_err(&serial->dev->dev, "%s: Get results incomplete [%d]\n",
+ serial->type->description, alen);
goto no_firmware;
} else if (result[0] != command[0]) {
- err("%s: Command failed [%d]",
- serial->type->description, result[0]);
+ dev_err(&serial->dev->dev, "%s: Command failed [%d]\n",
+ serial->type->description, result[0]);
goto no_firmware;
}
@@ -461,8 +469,9 @@ static int whiteheat_attach(struct usb_serial *serial)
info = kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL);
if (info == NULL) {
- err("%s: Out of memory for port structures\n",
- serial->type->description);
+ dev_err(&port->dev,
+ "%s: Out of memory for port structures\n",
+ serial->type->description);
goto no_private;
}
@@ -482,18 +491,20 @@ static int whiteheat_attach(struct usb_serial *serial)
for (j = 0; j < urb_pool_size; j++) {
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
- err("No free urbs available");
+ dev_err(&port->dev, "No free urbs available\n");
goto no_rx_urb;
}
buf_size = port->read_urb->transfer_buffer_length;
urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL);
if (!urb->transfer_buffer) {
- err("Couldn't allocate urb buffer");
+ dev_err(&port->dev,
+ "Couldn't allocate urb buffer\n");
goto no_rx_buf;
}
wrap = kmalloc(sizeof(*wrap), GFP_KERNEL);
if (!wrap) {
- err("Couldn't allocate urb wrapper");
+ dev_err(&port->dev,
+ "Couldn't allocate urb wrapper\n");
goto no_rx_wrap;
}
usb_fill_bulk_urb(urb, serial->dev,
@@ -506,18 +517,20 @@ static int whiteheat_attach(struct usb_serial *serial)
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
- err("No free urbs available");
+ dev_err(&port->dev, "No free urbs available\n");
goto no_tx_urb;
}
buf_size = port->write_urb->transfer_buffer_length;
urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL);
if (!urb->transfer_buffer) {
- err("Couldn't allocate urb buffer");
+ dev_err(&port->dev,
+ "Couldn't allocate urb buffer\n");
goto no_tx_buf;
}
wrap = kmalloc(sizeof(*wrap), GFP_KERNEL);
if (!wrap) {
- err("Couldn't allocate urb wrapper");
+ dev_err(&port->dev,
+ "Couldn't allocate urb wrapper\n");
goto no_tx_wrap;
}
usb_fill_bulk_urb(urb, serial->dev,
@@ -535,8 +548,9 @@ static int whiteheat_attach(struct usb_serial *serial)
command_info = kmalloc(sizeof(struct whiteheat_command_private),
GFP_KERNEL);
if (command_info == NULL) {
- err("%s: Out of memory for port structures\n",
- serial->type->description);
+ dev_err(&serial->dev->dev,
+ "%s: Out of memory for port structures\n",
+ serial->type->description);
goto no_command_private;
}
@@ -553,12 +567,15 @@ static int whiteheat_attach(struct usb_serial *serial)
no_firmware:
/* Firmware likely not running */
- err("%s: Unable to retrieve firmware version, try replugging\n",
- serial->type->description);
- err("%s: If the firmware is not running (status led not blinking)\n",
- serial->type->description);
- err("%s: please contact support@connecttech.com\n",
- serial->type->description);
+ dev_err(&serial->dev->dev,
+ "%s: Unable to retrieve firmware version, try replugging\n",
+ serial->type->description);
+ dev_err(&serial->dev->dev,
+ "%s: If the firmware is not running (status led not blinking)\n",
+ serial->type->description);
+ dev_err(&serial->dev->dev,
+ "%s: please contact support@connecttech.com\n",
+ serial->type->description);
kfree(result);
return -ENODEV;
@@ -681,8 +698,9 @@ static int whiteheat_open(struct tty_struct *tty,
/* Start reading from the device */
retval = start_port_read(port);
if (retval) {
- err("%s - failed submitting read urb, error %d",
- __func__, retval);
+ dev_err(&port->dev,
+ "%s - failed submitting read urb, error %d\n",
+ __func__, retval);
firm_close(port);
stop_command_port(port->serial);
goto exit;
@@ -807,8 +825,9 @@ static int whiteheat_write(struct tty_struct *tty,
urb->transfer_buffer_length = bytes;
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result) {
- err("%s - failed submitting write urb, error %d",
- __func__, result);
+ dev_err(&port->dev,
+ "%s - failed submitting write urb, error %d\n",
+ __func__, result);
sent = result;
spin_lock_irqsave(&info->lock, flags);
list_add(tmp, &info->tx_urbs_free);
@@ -1076,7 +1095,7 @@ static void whiteheat_read_callback(struct urb *urb)
wrap = urb_to_wrap(urb, &info->rx_urbs_submitted);
if (!wrap) {
spin_unlock(&info->lock);
- err("%s - Not my urb!", __func__);
+ dev_err(&port->dev, "%s - Not my urb!\n", __func__);
return;
}
list_del(&wrap->list);
@@ -1120,7 +1139,7 @@ static void whiteheat_write_callback(struct urb *urb)
wrap = urb_to_wrap(urb, &info->tx_urbs_submitted);
if (!wrap) {
spin_unlock(&info->lock);
- err("%s - Not my urb!", __func__);
+ dev_err(&port->dev, "%s - Not my urb!\n", __func__);
return;
}
list_move(&wrap->list, &info->tx_urbs_free);
@@ -1384,8 +1403,9 @@ static int start_command_port(struct usb_serial *serial)
command_port->read_urb->dev = serial->dev;
retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL);
if (retval) {
- err("%s - failed submitting read urb, error %d",
- __func__, retval);
+ dev_err(&serial->dev->dev,
+ "%s - failed submitting read urb, error %d\n",
+ __func__, retval);
goto exit;
}
}
@@ -1523,7 +1543,8 @@ static void rx_data_softint(struct work_struct *work)
urb->dev = port->serial->dev;
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result) {
- err("%s - failed resubmitting read urb, error %d",
+ dev_err(&port->dev,
+ "%s - failed resubmitting read urb, error %d\n",
__func__, result);
spin_lock_irqsave(&info->lock, flags);
list_add(tmp, &info->rx_urbs_free);
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-04 00:06:16 +0000