summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/serial/rs485.txt31
-rw-r--r--Documentation/devicetree/bindings/tty/serial/atmel-usart.txt27
-rw-r--r--Documentation/devicetree/bindings/tty/serial/snps-dw-apb-uart.txt25
-rw-r--r--Documentation/serial/serial-rs485.txt8
-rw-r--r--arch/arm/Kconfig1
-rw-r--r--arch/arm/mach-s3c64xx/dev-uart.c60
-rw-r--r--arch/arm/mach-s3c64xx/include/mach/irqs.h30
-rw-r--r--arch/arm/mach-s3c64xx/irq.c25
-rw-r--r--arch/arm/plat-s5p/Kconfig1
-rw-r--r--arch/arm/plat-s5p/dev-uart.c84
-rw-r--r--arch/arm/plat-s5p/include/plat/irqs.h35
-rw-r--r--arch/arm/plat-s5p/irq.c34
-rw-r--r--arch/arm/plat-samsung/Kconfig5
-rw-r--r--arch/arm/plat-samsung/Makefile1
-rw-r--r--arch/arm/plat-samsung/include/plat/regs-serial.h5
-rw-r--r--arch/arm/plat-samsung/irq-uart.c96
-rw-r--r--arch/h8300/Kconfig2
-rw-r--r--arch/mips/pmc-sierra/msp71xx/msp_serial.c73
-rw-r--r--arch/powerpc/include/asm/udbg.h1
-rw-r--r--arch/powerpc/kernel/udbg.c2
-rw-r--r--arch/x86/platform/mrst/mrst.c3
-rw-r--r--drivers/isdn/i4l/isdn_tty.c2
-rw-r--r--drivers/parport/parport_pc.c3
-rw-r--r--drivers/staging/Kconfig2
-rw-r--r--drivers/staging/Makefile1
-rw-r--r--drivers/staging/serial/68360serial.c (renamed from drivers/tty/serial/68360serial.c)0
-rw-r--r--drivers/staging/serial/Kconfig16
-rw-r--r--drivers/staging/serial/Makefile1
-rw-r--r--drivers/staging/serial/TODO6
-rw-r--r--drivers/tty/Kconfig34
-rw-r--r--drivers/tty/Makefile1
-rw-r--r--drivers/tty/amiserial.c12
-rw-r--r--drivers/tty/cyclades.c14
-rw-r--r--drivers/tty/ehv_bytechan.c881
-rw-r--r--drivers/tty/hvc/hvc_console.c9
-rw-r--r--drivers/tty/hvc/hvc_irq.c2
-rw-r--r--drivers/tty/hvc/hvcs.c4
-rw-r--r--drivers/tty/hvc/hvsi.c2
-rw-r--r--drivers/tty/isicom.c2
-rw-r--r--drivers/tty/mxser.c13
-rw-r--r--drivers/tty/n_gsm.c70
-rw-r--r--drivers/tty/pty.c26
-rw-r--r--drivers/tty/serial/68328serial.c37
-rw-r--r--drivers/tty/serial/68328serial.h1
-rw-r--r--drivers/tty/serial/8250.c132
-rw-r--r--drivers/tty/serial/8250_dw.c194
-rw-r--r--drivers/tty/serial/8250_pci.c42
-rw-r--r--drivers/tty/serial/Kconfig30
-rw-r--r--drivers/tty/serial/Makefile4
-rw-r--r--drivers/tty/serial/altera_jtaguart.c2
-rw-r--r--drivers/tty/serial/altera_uart.c2
-rw-r--r--drivers/tty/serial/apbuart.c1
-rw-r--r--drivers/tty/serial/atmel_serial.c128
-rw-r--r--drivers/tty/serial/bfin_sport_uart.c2
-rw-r--r--drivers/tty/serial/bfin_uart.c (renamed from drivers/tty/serial/bfin_5xx.c)65
-rw-r--r--drivers/tty/serial/cpm_uart/cpm_uart_core.c1
-rw-r--r--drivers/tty/serial/crisv10.c30
-rw-r--r--drivers/tty/serial/dz.c1
-rw-r--r--drivers/tty/serial/icom.c2
-rw-r--r--drivers/tty/serial/imx.c10
-rw-r--r--drivers/tty/serial/ioc3_serial.c1
-rw-r--r--drivers/tty/serial/ioc4_serial.c1
-rw-r--r--drivers/tty/serial/jsm/jsm.h10
-rw-r--r--drivers/tty/serial/jsm/jsm_driver.c19
-rw-r--r--drivers/tty/serial/jsm/jsm_neo.c29
-rw-r--r--drivers/tty/serial/jsm/jsm_tty.c94
-rw-r--r--drivers/tty/serial/lantiq.c6
-rw-r--r--drivers/tty/serial/m32r_sio.c1
-rw-r--r--drivers/tty/serial/max3100.c2
-rw-r--r--drivers/tty/serial/max3107.c2
-rw-r--r--drivers/tty/serial/mcf.c2
-rw-r--r--drivers/tty/serial/mfd.c49
-rw-r--r--drivers/tty/serial/mpc52xx_uart.c3
-rw-r--r--drivers/tty/serial/mrst_max3110.c115
-rw-r--r--drivers/tty/serial/mrst_max3110.h1
-rw-r--r--drivers/tty/serial/msm_serial.c2
-rw-r--r--drivers/tty/serial/msm_serial_hs.c2
-rw-r--r--drivers/tty/serial/mux.c2
-rw-r--r--drivers/tty/serial/nwpserial.c1
-rw-r--r--drivers/tty/serial/pch_uart.c2
-rw-r--r--drivers/tty/serial/pxa.c20
-rw-r--r--drivers/tty/serial/samsung.c107
-rw-r--r--drivers/tty/serial/samsung.h1
-rw-r--r--drivers/tty/serial/sb1250-duart.c1
-rw-r--r--drivers/tty/serial/serial_core.c72
-rw-r--r--drivers/tty/serial/serial_ks8695.c9
-rw-r--r--drivers/tty/serial/serial_txx9.c2
-rw-r--r--drivers/tty/serial/sh-sci.c2
-rw-r--r--drivers/tty/serial/sn_console.c3
-rw-r--r--drivers/tty/serial/timbuart.c2
-rw-r--r--drivers/tty/serial/uartlite.c1
-rw-r--r--drivers/tty/serial/ucc_uart.c4
-rw-r--r--drivers/tty/serial/xilinx_uartps.c4
-rw-r--r--drivers/tty/serial/zs.c1
-rw-r--r--drivers/tty/synclink.c1
-rw-r--r--drivers/tty/synclinkmp.c6
-rw-r--r--drivers/tty/tty_io.c50
-rw-r--r--drivers/tty/tty_ioctl.c17
-rw-r--r--drivers/tty/tty_ldisc.c1
-rw-r--r--drivers/tty/tty_mutex.c12
-rw-r--r--drivers/tty/tty_port.c2
-rw-r--r--drivers/tty/vt/keyboard.c3
-rw-r--r--drivers/tty/vt/selection.c4
-rw-r--r--drivers/tty/vt/vt.c2
-rw-r--r--include/linux/serial.h1
-rw-r--r--include/linux/serial_8250.h2
-rw-r--r--include/linux/serial_core.h10
-rw-r--r--include/linux/serial_reg.h1
-rw-r--r--include/linux/tty.h26
-rw-r--r--net/irda/ircomm/ircomm_tty.c2
110 files changed, 2101 insertions, 946 deletions
diff --git a/Documentation/devicetree/bindings/serial/rs485.txt b/Documentation/devicetree/bindings/serial/rs485.txt
new file mode 100644
index 000000000000..1e753c69fc83
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/rs485.txt
@@ -0,0 +1,31 @@
+* RS485 serial communications
+
+The RTS signal is capable of automatically controlling line direction for
+the built-in half-duplex mode.
+The properties described hereafter shall be given to a half-duplex capable
+UART node.
+
+Required properties:
+- rs485-rts-delay: prop-encoded-array <a b> where:
+ * a is the delay beteween rts signal and beginning of data sent in milliseconds.
+ it corresponds to the delay before sending data.
+ * b is the delay between end of data sent and rts signal in milliseconds
+ it corresponds to the delay after sending data and actual release of the line.
+
+Optional properties:
+- linux,rs485-enabled-at-boot-time: empty property telling to enable the rs485
+ feature at boot time. It can be disabled later with proper ioctl.
+- rs485-rx-during-tx: empty property that enables the receiving of data even
+ whilst sending data.
+
+RS485 example for Atmel USART:
+ usart0: serial@fff8c000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfff8c000 0x4000>;
+ interrupts = <7>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ linux,rs485-enabled-at-boot-time;
+ rs485-rts-delay = <0 200>; // in milliseconds
+ };
+
diff --git a/Documentation/devicetree/bindings/tty/serial/atmel-usart.txt b/Documentation/devicetree/bindings/tty/serial/atmel-usart.txt
new file mode 100644
index 000000000000..a49d9a1d4ccf
--- /dev/null
+++ b/Documentation/devicetree/bindings/tty/serial/atmel-usart.txt
@@ -0,0 +1,27 @@
+* Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
+
+Required properties:
+- compatible: Should be "atmel,<chip>-usart"
+ The compatible <chip> indicated will be the first SoC to support an
+ additional mode or an USART new feature.
+- reg: Should contain registers location and length
+- interrupts: Should contain interrupt
+
+Optional properties:
+- atmel,use-dma-rx: use of PDC or DMA for receiving data
+- atmel,use-dma-tx: use of PDC or DMA for transmitting data
+
+<chip> compatible description:
+- at91rm9200: legacy USART support
+- at91sam9260: generic USART implementation for SAM9 SoCs
+
+Example:
+
+ usart0: serial@fff8c000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfff8c000 0x4000>;
+ interrupts = <7>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ };
+
diff --git a/Documentation/devicetree/bindings/tty/serial/snps-dw-apb-uart.txt b/Documentation/devicetree/bindings/tty/serial/snps-dw-apb-uart.txt
new file mode 100644
index 000000000000..f13f1c5be91c
--- /dev/null
+++ b/Documentation/devicetree/bindings/tty/serial/snps-dw-apb-uart.txt
@@ -0,0 +1,25 @@
+* Synopsys DesignWare ABP UART
+
+Required properties:
+- compatible : "snps,dw-apb-uart"
+- reg : offset and length of the register set for the device.
+- interrupts : should contain uart interrupt.
+- clock-frequency : the input clock frequency for the UART.
+
+Optional properties:
+- reg-shift : quantity to shift the register offsets by. If this property is
+ not present then the register offsets are not shifted.
+- reg-io-width : the size (in bytes) of the IO accesses that should be
+ performed on the device. If this property is not present then single byte
+ accesses are used.
+
+Example:
+
+ uart@80230000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x80230000 0x100>;
+ clock-frequency = <3686400>;
+ interrupts = <10>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
diff --git a/Documentation/serial/serial-rs485.txt b/Documentation/serial/serial-rs485.txt
index a4932387bbfb..079cb3df62cf 100644
--- a/Documentation/serial/serial-rs485.txt
+++ b/Documentation/serial/serial-rs485.txt
@@ -28,6 +28,10 @@
RS485 communications. This data structure is used to set and configure RS485
parameters in the platform data and in ioctls.
+ The device tree can also provide RS485 boot time parameters (see [2]
+ for bindings). The driver is in charge of filling this data structure from
+ the values given by the device tree.
+
Any driver for devices capable of working both as RS232 and RS485 should
provide at least the following ioctls:
@@ -104,6 +108,9 @@
rs485conf.flags |= SER_RS485_RTS_AFTER_SEND;
rs485conf.delay_rts_after_send = ...;
+ /* Set this flag if you want to receive data even whilst sending data */
+ rs485conf.flags |= SER_RS485_RX_DURING_TX;
+
if (ioctl (fd, TIOCSRS485, &rs485conf) < 0) {
/* Error handling. See errno. */
}
@@ -118,3 +125,4 @@
5. REFERENCES
[1] include/linux/serial.h
+ [2] Documentation/devicetree/bindings/serial/rs485.txt
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7536b9cbb072..795126ea4935 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -727,7 +727,6 @@ config ARCH_S3C64XX
select ARCH_REQUIRE_GPIOLIB
select SAMSUNG_CLKSRC
select SAMSUNG_IRQ_VIC_TIMER
- select SAMSUNG_IRQ_UART
select S3C_GPIO_TRACK
select S3C_GPIO_PULL_UPDOWN
select S3C_GPIO_CFG_S3C24XX
diff --git a/arch/arm/mach-s3c64xx/dev-uart.c b/arch/arm/mach-s3c64xx/dev-uart.c
index f797f748b999..c681b99eda08 100644
--- a/arch/arm/mach-s3c64xx/dev-uart.c
+++ b/arch/arm/mach-s3c64xx/dev-uart.c
@@ -37,21 +37,10 @@ static struct resource s3c64xx_uart0_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_S3CUART_RX0,
- .end = IRQ_S3CUART_RX0,
+ .start = IRQ_UART0,
+ .end = IRQ_UART0,
.flags = IORESOURCE_IRQ,
},
- [2] = {
- .start = IRQ_S3CUART_TX0,
- .end = IRQ_S3CUART_TX0,
- .flags = IORESOURCE_IRQ,
-
- },
- [3] = {
- .start = IRQ_S3CUART_ERR0,
- .end = IRQ_S3CUART_ERR0,
- .flags = IORESOURCE_IRQ,
- }
};
static struct resource s3c64xx_uart1_resource[] = {
@@ -61,19 +50,8 @@ static struct resource s3c64xx_uart1_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_S3CUART_RX1,
- .end = IRQ_S3CUART_RX1,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S3CUART_TX1,
- .end = IRQ_S3CUART_TX1,
- .flags = IORESOURCE_IRQ,
-
- },
- [3] = {
- .start = IRQ_S3CUART_ERR1,
- .end = IRQ_S3CUART_ERR1,
+ .start = IRQ_UART1,
+ .end = IRQ_UART1,
.flags = IORESOURCE_IRQ,
},
};
@@ -85,19 +63,8 @@ static struct resource s3c6xx_uart2_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_S3CUART_RX2,
- .end = IRQ_S3CUART_RX2,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S3CUART_TX2,
- .end = IRQ_S3CUART_TX2,
- .flags = IORESOURCE_IRQ,
-
- },
- [3] = {
- .start = IRQ_S3CUART_ERR2,
- .end = IRQ_S3CUART_ERR2,
+ .start = IRQ_UART2,
+ .end = IRQ_UART2,
.flags = IORESOURCE_IRQ,
},
};
@@ -109,19 +76,8 @@ static struct resource s3c64xx_uart3_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_S3CUART_RX3,
- .end = IRQ_S3CUART_RX3,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S3CUART_TX3,
- .end = IRQ_S3CUART_TX3,
- .flags = IORESOURCE_IRQ,
-
- },
- [3] = {
- .start = IRQ_S3CUART_ERR3,
- .end = IRQ_S3CUART_ERR3,
+ .start = IRQ_UART3,
+ .end = IRQ_UART3,
.flags = IORESOURCE_IRQ,
},
};
diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h
index c026f67a80de..443f85b3c203 100644
--- a/arch/arm/mach-s3c64xx/include/mach/irqs.h
+++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h
@@ -27,36 +27,6 @@
#define IRQ_VIC0_BASE S3C_IRQ(0)
#define IRQ_VIC1_BASE S3C_IRQ(32)
-/* UART interrupts, each UART has 4 intterupts per channel so
- * use the space between the ISA and S3C main interrupts. Note, these
- * are not in the same order as the S3C24XX series! */
-
-#define IRQ_S3CUART_BASE0 (16)
-#define IRQ_S3CUART_BASE1 (20)
-#define IRQ_S3CUART_BASE2 (24)
-#define IRQ_S3CUART_BASE3 (28)
-
-#define UART_IRQ_RXD (0)
-#define UART_IRQ_ERR (1)
-#define UART_IRQ_TXD (2)
-#define UART_IRQ_MODEM (3)
-
-#define IRQ_S3CUART_RX0 (IRQ_S3CUART_BASE0 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX0 (IRQ_S3CUART_BASE0 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR0 (IRQ_S3CUART_BASE0 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX1 (IRQ_S3CUART_BASE1 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX1 (IRQ_S3CUART_BASE1 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR1 (IRQ_S3CUART_BASE1 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX2 (IRQ_S3CUART_BASE2 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX2 (IRQ_S3CUART_BASE2 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR2 (IRQ_S3CUART_BASE2 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX3 (IRQ_S3CUART_BASE3 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX3 (IRQ_S3CUART_BASE3 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR3 (IRQ_S3CUART_BASE3 + UART_IRQ_ERR)
-
/* VIC based IRQs */
#define S3C64XX_IRQ_VIC0(x) (IRQ_VIC0_BASE + (x))
diff --git a/arch/arm/mach-s3c64xx/irq.c b/arch/arm/mach-s3c64xx/irq.c
index 75d9a0e49193..b07357e94958 100644
--- a/arch/arm/mach-s3c64xx/irq.c
+++ b/arch/arm/mach-s3c64xx/irq.c
@@ -25,29 +25,6 @@
#include <plat/irq-uart.h>
#include <plat/cpu.h>
-static struct s3c_uart_irq uart_irqs[] = {
- [0] = {
- .regs = S3C_VA_UART0,
- .base_irq = IRQ_S3CUART_BASE0,
- .parent_irq = IRQ_UART0,
- },
- [1] = {
- .regs = S3C_VA_UART1,
- .base_irq = IRQ_S3CUART_BASE1,
- .parent_irq = IRQ_UART1,
- },
- [2] = {
- .regs = S3C_VA_UART2,
- .base_irq = IRQ_S3CUART_BASE2,
- .parent_irq = IRQ_UART2,
- },
- [3] = {
- .regs = S3C_VA_UART3,
- .base_irq = IRQ_S3CUART_BASE3,
- .parent_irq = IRQ_UART3,
- },
-};
-
/* setup the sources the vic should advertise resume for, even though it
* is not doing the wake (set_irq_wake needs to be valid) */
#define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE))
@@ -67,6 +44,4 @@ void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
/* add the timer sub-irqs */
s3c_init_vic_timer_irq(5, IRQ_TIMER0);
-
- s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs));
}
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index 9843c954c042..9a197e55f669 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -22,7 +22,6 @@ config PLAT_S5P
select PLAT_SAMSUNG
select SAMSUNG_CLKSRC
select SAMSUNG_IRQ_VIC_TIMER
- select SAMSUNG_IRQ_UART
help
Base platform code for Samsung's S5P series SoC.
diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c
index afaf87fdb93e..c9308db36183 100644
--- a/arch/arm/plat-s5p/dev-uart.c
+++ b/arch/arm/plat-s5p/dev-uart.c
@@ -32,20 +32,10 @@ static struct resource s5p_uart0_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_S5P_UART_RX0,
- .end = IRQ_S5P_UART_RX0,
+ .start = IRQ_UART0,
+ .end = IRQ_UART0,
.flags = IORESOURCE_IRQ,
},
- [2] = {
- .start = IRQ_S5P_UART_TX0,
- .end = IRQ_S5P_UART_TX0,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = IRQ_S5P_UART_ERR0,
- .end = IRQ_S5P_UART_ERR0,
- .flags = IORESOURCE_IRQ,
- }
};
static struct resource s5p_uart1_resource[] = {
@@ -55,18 +45,8 @@ static struct resource s5p_uart1_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_S5P_UART_RX1,
- .end = IRQ_S5P_UART_RX1,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S5P_UART_TX1,
- .end = IRQ_S5P_UART_TX1,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = IRQ_S5P_UART_ERR1,
- .end = IRQ_S5P_UART_ERR1,
+ .start = IRQ_UART1,
+ .end = IRQ_UART1,
.flags = IORESOURCE_IRQ,
},
};
@@ -78,18 +58,8 @@ static struct resource s5p_uart2_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_S5P_UART_RX2,
- .end = IRQ_S5P_UART_RX2,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S5P_UART_TX2,
- .end = IRQ_S5P_UART_TX2,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = IRQ_S5P_UART_ERR2,
- .end = IRQ_S5P_UART_ERR2,
+ .start = IRQ_UART2,
+ .end = IRQ_UART2,
.flags = IORESOURCE_IRQ,
},
};
@@ -102,18 +72,8 @@ static struct resource s5p_uart3_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_S5P_UART_RX3,
- .end = IRQ_S5P_UART_RX3,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S5P_UART_TX3,
- .end = IRQ_S5P_UART_TX3,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = IRQ_S5P_UART_ERR3,
- .end = IRQ_S5P_UART_ERR3,
+ .start = IRQ_UART3,
+ .end = IRQ_UART3,
.flags = IORESOURCE_IRQ,
},
#endif
@@ -127,18 +87,8 @@ static struct resource s5p_uart4_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_S5P_UART_RX4,
- .end = IRQ_S5P_UART_RX4,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S5P_UART_TX4,
- .end = IRQ_S5P_UART_TX4,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = IRQ_S5P_UART_ERR4,
- .end = IRQ_S5P_UART_ERR4,
+ .start = IRQ_UART4,
+ .end = IRQ_UART4,
.flags = IORESOURCE_IRQ,
},
#endif
@@ -152,18 +102,8 @@ static struct resource s5p_uart5_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_S5P_UART_RX5,
- .end = IRQ_S5P_UART_RX5,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S5P_UART_TX5,
- .end = IRQ_S5P_UART_TX5,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = IRQ_S5P_UART_ERR5,
- .end = IRQ_S5P_UART_ERR5,
+ .start = IRQ_UART5,
+ .end = IRQ_UART5,
.flags = IORESOURCE_IRQ,
},
#endif
diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-s5p/include/plat/irqs.h
index ba9121c60a2a..144dbfc6506d 100644
--- a/arch/arm/plat-s5p/include/plat/irqs.h
+++ b/arch/arm/plat-s5p/include/plat/irqs.h
@@ -37,41 +37,6 @@
#define IRQ_VIC1_BASE S5P_VIC1_BASE
#define IRQ_VIC2_BASE S5P_VIC2_BASE
-/* UART interrupts, each UART has 4 intterupts per channel so
- * use the space between the ISA and S3C main interrupts. Note, these
- * are not in the same order as the S3C24XX series! */
-
-#define IRQ_S5P_UART_BASE0 (16)
-#define IRQ_S5P_UART_BASE1 (20)
-#define IRQ_S5P_UART_BASE2 (24)
-#define IRQ_S5P_UART_BASE3 (28)
-
-#define UART_IRQ_RXD (0)
-#define UART_IRQ_ERR (1)
-#define UART_IRQ_TXD (2)
-
-#define IRQ_S5P_UART_RX0 (IRQ_S5P_UART_BASE0 + UART_IRQ_RXD)
-#define IRQ_S5P_UART_TX0 (IRQ_S5P_UART_BASE0 + UART_IRQ_TXD)
-#define IRQ_S5P_UART_ERR0 (IRQ_S5P_UART_BASE0 + UART_IRQ_ERR)
-
-#define IRQ_S5P_UART_RX1 (IRQ_S5P_UART_BASE1 + UART_IRQ_RXD)
-#define IRQ_S5P_UART_TX1 (IRQ_S5P_UART_BASE1 + UART_IRQ_TXD)
-#define IRQ_S5P_UART_ERR1 (IRQ_S5P_UART_BASE1 + UART_IRQ_ERR)
-
-#define IRQ_S5P_UART_RX2 (IRQ_S5P_UART_BASE2 + UART_IRQ_RXD)
-#define IRQ_S5P_UART_TX2 (IRQ_S5P_UART_BASE2 + UART_IRQ_TXD)
-#define IRQ_S5P_UART_ERR2 (IRQ_S5P_UART_BASE2 + UART_IRQ_ERR)
-
-#define IRQ_S5P_UART_RX3 (IRQ_S5P_UART_BASE3 + UART_IRQ_RXD)
-#define IRQ_S5P_UART_TX3 (IRQ_S5P_UART_BASE3 + UART_IRQ_TXD)
-#define IRQ_S5P_UART_ERR3 (IRQ_S5P_UART_BASE3 + UART_IRQ_ERR)
-
-/* S3C compatibilty defines */
-#define IRQ_S3CUART_RX0 IRQ_S5P_UART_RX0
-#define IRQ_S3CUART_RX1 IRQ_S5P_UART_RX1
-#define IRQ_S3CUART_RX2 IRQ_S5P_UART_RX2
-#define IRQ_S3CUART_RX3 IRQ_S5P_UART_RX3
-
/* VIC based IRQs */
#define S5P_IRQ_VIC0(x) (S5P_VIC0_BASE + (x))
diff --git a/arch/arm/plat-s5p/irq.c b/arch/arm/plat-s5p/irq.c
index a97c08957f49..afdaa1082b9f 100644
--- a/arch/arm/plat-s5p/irq.c
+++ b/arch/arm/plat-s5p/irq.c
@@ -17,42 +17,10 @@
#include <asm/hardware/vic.h>
-#include <linux/serial_core.h>
#include <mach/map.h>
#include <plat/regs-timer.h>
-#include <plat/regs-serial.h>
#include <plat/cpu.h>
#include <plat/irq-vic-timer.h>
-#include <plat/irq-uart.h>
-
-/*
- * Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
- * are consecutive when looking up the interrupt in the demux routines.
- */
-static struct s3c_uart_irq uart_irqs[] = {
- [0] = {
- .regs = S5P_VA_UART0,
- .base_irq = IRQ_S5P_UART_BASE0,
- .parent_irq = IRQ_UART0,
- },
- [1] = {
- .regs = S5P_VA_UART1,
- .base_irq = IRQ_S5P_UART_BASE1,
- .parent_irq = IRQ_UART1,
- },
- [2] = {
- .regs = S5P_VA_UART2,
- .base_irq = IRQ_S5P_UART_BASE2,
- .parent_irq = IRQ_UART2,
- },
-#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
- [3] = {
- .regs = S5P_VA_UART3,
- .base_irq = IRQ_S5P_UART_BASE3,
- .parent_irq = IRQ_UART3,
- },
-#endif
-};
void __init s5p_init_irq(u32 *vic, u32 num_vic)
{
@@ -65,6 +33,4 @@ void __init s5p_init_irq(u32 *vic, u32 num_vic)
#endif
s3c_init_vic_timer_irq(5, IRQ_TIMER0);
-
- s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs));
}
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index b3e10659e4b8..dffa37bc4a0b 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -65,11 +65,6 @@ config SAMSUNG_IRQ_VIC_TIMER
help
Internal configuration to build the VIC timer interrupt code.
-config SAMSUNG_IRQ_UART
- bool
- help
- Internal configuration to build the IRQ UART demux code.
-
# options for gpio configuration support
config SAMSUNG_GPIOLIB_4BIT
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 853764ba8cc5..1105922342fe 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -21,7 +21,6 @@ obj-y += dev-asocdma.o
obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o
-obj-$(CONFIG_SAMSUNG_IRQ_UART) += irq-uart.o
obj-$(CONFIG_SAMSUNG_IRQ_VIC_TIMER) += irq-vic-timer.o
# ADC
diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h
index bac36fa3becb..720734847027 100644
--- a/arch/arm/plat-samsung/include/plat/regs-serial.h
+++ b/arch/arm/plat-samsung/include/plat/regs-serial.h
@@ -186,6 +186,11 @@
#define S3C64XX_UINTSP 0x34
#define S3C64XX_UINTM 0x38
+#define S3C64XX_UINTM_RXD (0)
+#define S3C64XX_UINTM_TXD (2)
+#define S3C64XX_UINTM_RXD_MSK (1 << S3C64XX_UINTM_RXD)
+#define S3C64XX_UINTM_TXD_MSK (1 << S3C64XX_UINTM_TXD)
+
/* Following are specific to S5PV210 */
#define S5PV210_UCON_CLKMASK (1<<10)
#define S5PV210_UCON_PCLK (0<<10)
diff --git a/arch/arm/plat-samsung/irq-uart.c b/arch/arm/plat-samsung/irq-uart.c
deleted file mode 100644
index 3014c7226bd1..000000000000
--- a/arch/arm/plat-samsung/irq-uart.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/* arch/arm/plat-samsung/irq-uart.c
- * originally part of arch/arm/plat-s3c64xx/irq.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * Samsung- UART Interrupt handling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/serial_core.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/map.h>
-#include <plat/irq-uart.h>
-#include <plat/regs-serial.h>
-#include <plat/cpu.h>
-
-/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
- * are consecutive when looking up the interrupt in the demux routines.
- */
-static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc)
-{
- struct s3c_uart_irq *uirq = desc->irq_data.handler_data;
- struct irq_chip *chip = irq_get_chip(irq);
- u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP);
- int base = uirq->base_irq;
-
- chained_irq_enter(chip, desc);
-
- if (pend & (1 << 0))
- generic_handle_irq(base);
- if (pend & (1 << 1))
- generic_handle_irq(base + 1);
- if (pend & (1 << 2))
- generic_handle_irq(base + 2);
- if (pend & (1 << 3))
- generic_handle_irq(base + 3);
-
- chained_irq_exit(chip, desc);
-}
-
-static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq)
-{
- void __iomem *reg_base = uirq->regs;
- struct irq_chip_generic *gc;
- struct irq_chip_type *ct;
-
- /* mask all interrupts at the start. */
- __raw_writel(0xf, reg_base + S3C64XX_UINTM);
-
- gc = irq_alloc_generic_chip("s3c-uart", 1, uirq->base_irq, reg_base,
- handle_level_irq);
-
- if (!gc) {
- pr_err("%s: irq_alloc_generic_chip for IRQ %u failed\n",
- __func__, uirq->base_irq);
- return;
- }
-
- ct = gc->chip_types;
- ct->chip.irq_ack = irq_gc_ack_set_bit;
- ct->chip.irq_mask = irq_gc_mask_set_bit;
- ct->chip.irq_unmask = irq_gc_mask_clr_bit;
- ct->regs.ack = S3C64XX_UINTP;
- ct->regs.mask = S3C64XX_UINTM;
- irq_setup_generic_chip(gc, IRQ_MSK(4), IRQ_GC_INIT_MASK_CACHE,
- IRQ_NOREQUEST | IRQ_NOPROBE, 0);
-
- irq_set_handler_data(uirq->parent_irq, uirq);
- irq_set_chained_handler(uirq->parent_irq, s3c_irq_demux_uart);
-}
-
-/**
- * s3c_init_uart_irqs() - initialise UART IRQs and the necessary demuxing
- * @irq: The interrupt data for registering
- * @nr_irqs: The number of interrupt descriptions in @irq.
- *
- * Register the UART interrupts specified by @irq including the demuxing
- * routines. This supports the S3C6400 and newer style of devices.
- */
-void __init s3c_init_uart_irqs(struct s3c_uart_irq *irq, unsigned int nr_irqs)
-{
- for (; nr_irqs > 0; nr_irqs--, irq++)
- s3c_init_uart_irq(irq);
-}
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
index 7ed7714573c8..d1f377f5d3b6 100644
--- a/arch/h8300/Kconfig
+++ b/arch/h8300/Kconfig
@@ -195,7 +195,7 @@ config UNIX98_PTYS
source "drivers/char/pcmcia/Kconfig"
-source "drivers/serial/Kconfig"
+source "drivers/tty/serial/Kconfig"
source "drivers/i2c/Kconfig"
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_serial.c b/arch/mips/pmc-sierra/msp71xx/msp_serial.c
index f7261628d8a6..a1c7c7da2336 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_serial.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_serial.c
@@ -27,6 +27,7 @@
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
+#include <linux/slab.h>
#include <asm/bootinfo.h>
#include <asm/io.h>
@@ -38,6 +39,55 @@
#include <msp_int.h>
#include <msp_regs.h>
+struct msp_uart_data {
+ int last_lcr;
+};
+
+static void msp_serial_out(struct uart_port *p, int offset, int value)
+{
+ struct msp_uart_data *d = p->private_data;
+
+ if (offset == UART_LCR)
+ d->last_lcr = value;
+
+ offset <<= p->regshift;
+ writeb(value, p->membase + offset);
+}
+
+static unsigned int msp_serial_in(struct uart_port *p, int offset)
+{
+ offset <<= p->regshift;
+
+ return readb(p->membase + offset);
+}
+
+static int msp_serial_handle_irq(struct uart_port *p)
+{
+ struct msp_uart_data *d = p->private_data;
+ unsigned int iir = readb(p->membase + (UART_IIR << p->regshift));
+
+ if (serial8250_handle_irq(p, iir)) {
+ return 1;
+ } else if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
+ /*
+ * The DesignWare APB UART has an Busy Detect (0x07) interrupt
+ * meaning an LCR write attempt occurred while the UART was
+ * busy. The interrupt must be cleared by reading the UART
+ * status register (USR) and the LCR re-written.
+ *
+ * Note: MSP reserves 0x20 bytes of address space for the UART
+ * and the USR is mapped in a separate block at an offset of
+ * 0xc0 from the start of the UART.
+ */
+ (void)readb(p->membase + 0xc0);
+ writeb(d->last_lcr, p->membase + (UART_LCR << p->regshift));
+
+ return 1;
+ }
+
+ return 0;
+}
+
void __init msp_serial_setup(void)
{
char *s;
@@ -59,13 +109,22 @@ void __init msp_serial_setup(void)
up.irq = MSP_INT_UART0;
up.uartclk = uartclk;
up.regshift = 2;
- up.iotype = UPIO_DWAPB; /* UPIO_MEM like */
+ up.iotype = UPIO_MEM;
up.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
up.type = PORT_16550A;
up.line = 0;
- up.private_data = (void*)UART0_STATUS_REG;
- if (early_serial_setup(&up))
- printk(KERN_ERR "Early serial init of port 0 failed\n");
+ up.serial_out = msp_serial_out;
+ up.serial_in = msp_serial_in;
+ up.handle_irq = msp_serial_handle_irq;
+ up.private_data = kzalloc(sizeof(struct msp_uart_data), GFP_KERNEL);
+ if (!up.private_data) {
+ pr_err("failed to allocate uart private data\n");
+ return;
+ }
+ if (early_serial_setup(&up)) {
+ kfree(up.private_data);
+ pr_err("Early serial init of port 0 failed\n");
+ }
/* Initialize the second serial port, if one exists */
switch (mips_machtype) {
@@ -88,6 +147,8 @@ void __init msp_serial_setup(void)
up.irq = MSP_INT_UART1;
up.line = 1;
up.private_data = (void*)UART1_STATUS_REG;
- if (early_serial_setup(&up))
- printk(KERN_ERR "Early serial init of port 1 failed\n");
+ if (early_serial_setup(&up)) {
+ kfree(up.private_data);
+ pr_err("Early serial init of port 1 failed\n");
+ }
}
diff --git a/arch/powerpc/include/asm/udbg.h b/arch/powerpc/include/asm/udbg.h
index 93e05d1b34b2..5354ae91bdde 100644
--- a/arch/powerpc/include/asm/udbg.h
+++ b/arch/powerpc/include/asm/udbg.h
@@ -54,6 +54,7 @@ extern void __init udbg_init_40x_realmode(void);
extern void __init udbg_init_cpm(void);
extern void __init udbg_init_usbgecko(void);
extern void __init udbg_init_wsp(void);
+extern void __init udbg_init_ehv_bc(void);
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_UDBG_H */
diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c
index faa82c1f3f68..b4607a91d1f4 100644
--- a/arch/powerpc/kernel/udbg.c
+++ b/arch/powerpc/kernel/udbg.c
@@ -67,6 +67,8 @@ void __init udbg_early_init(void)
udbg_init_usbgecko();
#elif defined(CONFIG_PPC_EARLY_DEBUG_WSP)
udbg_init_wsp();
+#elif defined(CONFIG_PPC_EARLY_DEBUG_EHV_BC)
+ udbg_init_ehv_bc();
#endif
#ifdef CONFIG_PPC_EARLY_DEBUG
diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c
index fe73276e026b..e6379526675b 100644
--- a/arch/x86/platform/mrst/mrst.c
+++ b/arch/x86/platform/mrst/mrst.c
@@ -14,6 +14,8 @@
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/scatterlist.h>
#include <linux/sfi.h>
#include <linux/intel_pmic_gpio.h>
#include <linux/spi/spi.h>
@@ -392,6 +394,7 @@ static void __init *max3111_platform_data(void *info)
struct spi_board_info *spi_info = info;
int intr = get_gpio_by_name("max3111_int");
+ spi_info->mode = SPI_MODE_0;
if (intr == -1)
return NULL;
spi_info->irq = intr + MRST_IRQ_OFFSET;
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index d8504279e502..e5546cb3ac69 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -1693,7 +1693,7 @@ isdn_tty_close(struct tty_struct *tty, struct file *filp)
* line status register.
*/
if (info->flags & ISDN_ASYNC_INITIALIZED) {
- tty_wait_until_sent(tty, 3000); /* 30 seconds timeout */
+ tty_wait_until_sent_from_close(tty, 3000); /* 30 seconds timeout */
/*
* Before we drop DTR, make sure the UART transmitter
* has completely drained; this is especially
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index d1cdb9449f84..d0b597b50398 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -2595,14 +2595,17 @@ static int __devinit sio_ite_8872_probe(struct pci_dev *pdev, int autoirq,
break;
case 0x6:
printk(KERN_INFO "parport_pc: ITE8873 found (1S)\n");
+ release_region(inta_addr[i], 32);
return 0;
case 0x8:
printk(KERN_INFO "parport_pc: ITE8874 found (2S)\n");
+ release_region(inta_addr[i], 32);
return 0;
default:
printk(KERN_INFO "parport_pc: unknown ITE887x\n");
printk(KERN_INFO "parport_pc: please mail 'lspci -nvv' "
"output to Rich.Liu@ite.com.tw\n");
+ release_region(inta_addr[i], 32);
return 0;
}
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 2582e1890335..036d9de041b8 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -24,6 +24,8 @@ menuconfig STAGING
if STAGING
+source "drivers/staging/serial/Kconfig"
+
source "drivers/staging/et131x/Kconfig"
source "drivers/staging/slicoss/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 50d112fe4ca1..0599509ff4f7 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -3,6 +3,7 @@
# fix for build system bug...
obj-$(CONFIG_STAGING) += staging.o
+obj-y += serial/
obj-$(CONFIG_ET131X) += et131x/
obj-$(CONFIG_SLICOSS) += slicoss/
obj-$(CONFIG_VIDEO_GO7007) += go7007/
diff --git a/drivers/tty/serial/68360serial.c b/drivers/staging/serial/68360serial.c
index 0a3e8787ed50..0a3e8787ed50 100644
--- a/drivers/tty/serial/68360serial.c
+++ b/drivers/staging/serial/68360serial.c
diff --git a/drivers/staging/serial/Kconfig b/drivers/staging/serial/Kconfig
new file mode 100644
index 000000000000..9489688397e0
--- /dev/null
+++ b/drivers/staging/serial/Kconfig
@@ -0,0 +1,16 @@
+config SERIAL_68360_SMC
+ bool "68360 SMC uart support"
+ depends on M68360
+ help
+ This driver supports the SMC serial ports of the Motorola 68360 CPU.
+
+config SERIAL_68360_SCC
+ bool "68360 SCC uart support"
+ depends on M68360
+ help
+ This driver supports the SCC serial ports of the Motorola 68360 CPU.
+
+config SERIAL_68360
+ bool
+ depends on SERIAL_68360_SMC || SERIAL_68360_SCC
+ default y
diff --git a/drivers/staging/serial/Makefile b/drivers/staging/serial/Makefile
new file mode 100644
index 000000000000..37a6a0b35fba
--- /dev/null
+++ b/drivers/staging/serial/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_SERIAL_68360) += 68360serial.o
diff --git a/drivers/staging/serial/TODO b/drivers/staging/serial/TODO
new file mode 100644
index 000000000000..a19cda81dab4
--- /dev/null
+++ b/drivers/staging/serial/TODO
@@ -0,0 +1,6 @@
+These are a few serial drivers that either do not build, or do not work if they
+do build, or if they seem to work, are for obsolete hardware, or are full of
+unfixable races and no one uses them anymore.
+
+If no one steps up to adopt any of these drivers, they will be removed
+in the 3.4 release.
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index 33175504bb39..8816f53e004d 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -354,3 +354,37 @@ config TRACE_SINK
If you select this option, you need to select
"Trace data router for MIPI P1149.7 cJTAG standard".
+
+config PPC_EPAPR_HV_BYTECHAN
+ tristate "ePAPR hypervisor byte channel driver"
+ depends on PPC
+ help
+ This driver creates /dev entries for each ePAPR hypervisor byte
+ channel, thereby allowing applications to communicate with byte
+ channels as if they were serial ports.
+
+config PPC_EARLY_DEBUG_EHV_BC
+ bool "Early console (udbg) support for ePAPR hypervisors"
+ depends on PPC_EPAPR_HV_BYTECHAN
+ help
+ Select this option to enable early console (a.k.a. "udbg") support
+ via an ePAPR byte channel. You also need to choose the byte channel
+ handle below.
+
+config PPC_EARLY_DEBUG_EHV_BC_HANDLE
+ int "Byte channel handle for early console (udbg)"
+ depends on PPC_EARLY_DEBUG_EHV_BC
+ default 0
+ help
+ If you want early console (udbg) output through a byte channel,
+ specify the handle of the byte channel to use.
+
+ For this to work, the byte channel driver must be compiled
+ in-kernel, not as a module.
+
+ Note that only one early console driver can be enabled, so don't
+ enable any others if you enable this one.
+
+ If the number you specify is not a valid byte channel handle, then
+ there simply will be no early console output. This is true also
+ if you don't boot under a hypervisor at all.
diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile
index ea89b0bd15fe..2953059530e4 100644
--- a/drivers/tty/Makefile
+++ b/drivers/tty/Makefile
@@ -26,5 +26,6 @@ obj-$(CONFIG_ROCKETPORT) += rocket.o
obj-$(CONFIG_SYNCLINK_GT) += synclink_gt.o
obj-$(CONFIG_SYNCLINKMP) += synclinkmp.o
obj-$(CONFIG_SYNCLINK) += synclink.o
+obj-$(CONFIG_PPC_EPAPR_HV_BYTECHAN) += ehv_bytechan.o
obj-y += ipwireless/
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 220579592c20..b84c83456dcc 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -1529,7 +1529,6 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
{
struct async_struct * info = tty->driver_data;
unsigned long orig_jiffies, char_time;
- int tty_was_locked = tty_locked();
int lsr;
if (serial_paranoia_check(info, tty->name, "rs_wait_until_sent"))
@@ -1541,12 +1540,6 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
orig_jiffies = jiffies;
/*
- * tty_wait_until_sent is called from lots of places,
- * with or without the BTM.
- */
- if (!tty_was_locked)
- tty_lock();
- /*
* Set the check interval to be 1/5 of the estimated time to
* send a single character, and make it at least 1. The check
* interval should also be less than the timeout.
@@ -1586,8 +1579,7 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
break;
}
__set_current_state(TASK_RUNNING);
- if (!tty_was_locked)
- tty_unlock();
+
#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
#endif
@@ -2025,7 +2017,7 @@ static int __init amiga_serial_probe(struct platform_device *pdev)
if (error)
goto fail_unregister;
- error = request_irq(IRQ_AMIGA_RBF, ser_rx_int, IRQF_DISABLED,
+ error = request_irq(IRQ_AMIGA_RBF, ser_rx_int, 0,
"serial RX", state);
if (error)
goto fail_free_irq;
diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c
index c0e8f2eeb886..c9bf779481d8 100644
--- a/drivers/tty/cyclades.c
+++ b/drivers/tty/cyclades.c
@@ -45,7 +45,6 @@
#undef CY_DEBUG_IO
#undef CY_DEBUG_COUNT
#undef CY_DEBUG_DTR
-#undef CY_DEBUG_WAIT_UNTIL_SENT
#undef CY_DEBUG_INTERRUPTS
#undef CY_16Y_HACK
#undef CY_ENABLE_MONITORING
@@ -1678,16 +1677,10 @@ static void cy_wait_until_sent(struct tty_struct *tty, int timeout)
*/
if (!timeout || timeout > 2 * info->timeout)
timeout = 2 * info->timeout;
-#ifdef CY_DEBUG_WAIT_UNTIL_SENT
- printk(KERN_DEBUG "In cy_wait_until_sent(%d) check=%d, jiff=%lu...",
- timeout, char_time, jiffies);
-#endif
+
card = info->card;
if (!cy_is_Z(card)) {
while (cyy_readb(info, CySRER) & CyTxRdy) {
-#ifdef CY_DEBUG_WAIT_UNTIL_SENT
- printk(KERN_DEBUG "Not clean (jiff=%lu)...", jiffies);
-#endif
if (msleep_interruptible(jiffies_to_msecs(char_time)))
break;
if (timeout && time_after(jiffies, orig_jiffies +
@@ -1697,9 +1690,6 @@ static void cy_wait_until_sent(struct tty_struct *tty, int timeout)
}
/* Run one more char cycle */
msleep_interruptible(jiffies_to_msecs(char_time * 5));
-#ifdef CY_DEBUG_WAIT_UNTIL_SENT
- printk(KERN_DEBUG "Clean (jiff=%lu)...done\n", jiffies);
-#endif
}
static void cy_flush_buffer(struct tty_struct *tty)
@@ -3377,7 +3367,7 @@ static int __init cy_detect_isa(void)
/* allocate IRQ */
if (request_irq(cy_isa_irq, cyy_interrupt,
- IRQF_DISABLED, "Cyclom-Y", &cy_card[j])) {
+ 0, "Cyclom-Y", &cy_card[j])) {
printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but "
"could not allocate IRQ#%d.\n",
(unsigned long)cy_isa_address, cy_isa_irq);
diff --git a/drivers/tty/ehv_bytechan.c b/drivers/tty/ehv_bytechan.c
new file mode 100644
index 000000000000..1595dba0072c
--- /dev/null
+++ b/drivers/tty/ehv_bytechan.c
@@ -0,0 +1,881 @@
+/* ePAPR hypervisor byte channel device driver
+ *
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ *
+ * Author: Timur Tabi <timur@freescale.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ * This driver support three distinct interfaces, all of which are related to
+ * ePAPR hypervisor byte channels.
+ *
+ * 1) An early-console (udbg) driver. This provides early console output
+ * through a byte channel. The byte channel handle must be specified in a
+ * Kconfig option.
+ *
+ * 2) A normal console driver. Output is sent to the byte channel designated
+ * for stdout in the device tree. The console driver is for handling kernel
+ * printk calls.
+ *
+ * 3) A tty driver, which is used to handle user-space input and output. The
+ * byte channel used for the console is designated as the default tty.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/fs.h>
+#include <linux/poll.h>
+#include <asm/epapr_hcalls.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/cdev.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/circ_buf.h>
+#include <asm/udbg.h>
+
+/* The size of the transmit circular buffer. This must be a power of two. */
+#define BUF_SIZE 2048
+
+/* Per-byte channel private data */
+struct ehv_bc_data {
+ struct device *dev;
+ struct tty_port port;
+ uint32_t handle;
+ unsigned int rx_irq;
+ unsigned int tx_irq;
+
+ spinlock_t lock; /* lock for transmit buffer */
+ unsigned char buf[BUF_SIZE]; /* transmit circular buffer */
+ unsigned int head; /* circular buffer head */
+ unsigned int tail; /* circular buffer tail */
+
+ int tx_irq_enabled; /* true == TX interrupt is enabled */
+};
+
+/* Array of byte channel objects */
+static struct ehv_bc_data *bcs;
+
+/* Byte channel handle for stdout (and stdin), taken from device tree */
+static unsigned int stdout_bc;
+
+/* Virtual IRQ for the byte channel handle for stdin, taken from device tree */
+static unsigned int stdout_irq;
+
+/**************************** SUPPORT FUNCTIONS ****************************/
+
+/*
+ * Enable the transmit interrupt
+ *
+ * Unlike a serial device, byte channels have no mechanism for disabling their
+ * own receive or transmit interrupts. To emulate that feature, we toggle
+ * the IRQ in the kernel.
+ *
+ * We cannot just blindly call enable_irq() or disable_irq(), because these
+ * calls are reference counted. This means that we cannot call enable_irq()
+ * if interrupts are already enabled. This can happen in two situations:
+ *
+ * 1. The tty layer makes two back-to-back calls to ehv_bc_tty_write()
+ * 2. A transmit interrupt occurs while executing ehv_bc_tx_dequeue()
+ *
+ * To work around this, we keep a flag to tell us if the IRQ is enabled or not.
+ */
+static void enable_tx_interrupt(struct ehv_bc_data *bc)
+{
+ if (!bc->tx_irq_enabled) {
+ enable_irq(bc->tx_irq);
+ bc->tx_irq_enabled = 1;
+ }
+}
+
+static void disable_tx_interrupt(struct ehv_bc_data *bc)
+{
+ if (bc->tx_irq_enabled) {
+ disable_irq_nosync(bc->tx_irq);
+ bc->tx_irq_enabled = 0;
+ }
+}
+
+/*
+ * find the byte channel handle to use for the console
+ *
+ * The byte channel to be used for the console is specified via a "stdout"
+ * property in the /chosen node.
+ *
+ * For compatible with legacy device trees, we also look for a "stdout" alias.
+ */
+static int find_console_handle(void)
+{
+ struct device_node *np, *np2;
+ const char *sprop = NULL;
+ const uint32_t *iprop;
+
+ np = of_find_node_by_path("/chosen");
+ if (np)
+ sprop = of_get_property(np, "stdout-path", NULL);
+
+ if (!np || !sprop) {
+ of_node_put(np);
+ np = of_find_node_by_name(NULL, "aliases");
+ if (np)
+ sprop = of_get_property(np, "stdout", NULL);
+ }
+
+ if (!sprop) {
+ of_node_put(np);
+ return 0;
+ }
+
+ /* We don't care what the aliased node is actually called. We only
+ * care if it's compatible with "epapr,hv-byte-channel", because that
+ * indicates that it's a byte channel node. We use a temporary
+ * variable, 'np2', because we can't release 'np' until we're done with
+ * 'sprop'.
+ */
+ np2 = of_find_node_by_path(sprop);
+ of_node_put(np);
+ np = np2;
+ if (!np) {
+ pr_warning("ehv-bc: stdout node '%s' does not exist\n", sprop);
+ return 0;
+ }
+
+ /* Is it a byte channel? */
+ if (!of_device_is_compatible(np, "epapr,hv-byte-channel")) {
+ of_node_put(np);
+ return 0;
+ }
+
+ stdout_irq = irq_of_parse_and_map(np, 0);
+ if (stdout_irq == NO_IRQ) {
+ pr_err("ehv-bc: no 'interrupts' property in %s node\n", sprop);
+ of_node_put(np);
+ return 0;
+ }
+
+ /*
+ * The 'hv-handle' property contains the handle for this byte channel.
+ */
+ iprop = of_get_property(np, "hv-handle", NULL);
+ if (!iprop) {
+ pr_err("ehv-bc: no 'hv-handle' property in %s node\n",
+ np->name);
+ of_node_put(np);
+ return 0;
+ }
+ stdout_bc = be32_to_cpu(*iprop);
+
+ of_node_put(np);
+ return 1;
+}
+
+/*************************** EARLY CONSOLE DRIVER ***************************/
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_EHV_BC
+
+/*
+ * send a byte to a byte channel, wait if necessary
+ *
+ * This function sends a byte to a byte channel, and it waits and
+ * retries if the byte channel is full. It returns if the character
+ * has been sent, or if some error has occurred.
+ *
+ */
+static void byte_channel_spin_send(const char data)
+{
+ int ret, count;
+
+ do {
+ count = 1;
+ ret = ev_byte_channel_send(CONFIG_PPC_EARLY_DEBUG_EHV_BC_HANDLE,
+ &count, &data);
+ } while (ret == EV_EAGAIN);
+}
+
+/*
+ * The udbg subsystem calls this function to display a single character.
+ * We convert CR to a CR/LF.
+ */
+static void ehv_bc_udbg_putc(char c)
+{
+ if (c == '\n')
+ byte_channel_spin_send('\r');
+
+ byte_channel_spin_send(c);
+}
+
+/*
+ * early console initialization
+ *
+ * PowerPC kernels support an early printk console, also known as udbg.
+ * This function must be called via the ppc_md.init_early function pointer.
+ * At this point, the device tree has been unflattened, so we can obtain the
+ * byte channel handle for stdout.
+ *
+ * We only support displaying of characters (putc). We do not support
+ * keyboard input.
+ */
+void __init udbg_init_ehv_bc(void)
+{
+ unsigned int rx_count, tx_count;
+ unsigned int ret;
+
+ /* Verify the byte channel handle */
+ ret = ev_byte_channel_poll(CONFIG_PPC_EARLY_DEBUG_EHV_BC_HANDLE,
+ &rx_count, &tx_count);
+ if (ret)
+ return;
+
+ udbg_putc = ehv_bc_udbg_putc;
+ register_early_udbg_console();
+
+ udbg_printf("ehv-bc: early console using byte channel handle %u\n",
+ CONFIG_PPC_EARLY_DEBUG_EHV_BC_HANDLE);
+}
+
+#endif
+
+/****************************** CONSOLE DRIVER ******************************/
+
+static struct tty_driver *ehv_bc_driver;
+
+/*
+ * Byte channel console sending worker function.
+ *
+ * For consoles, if the output buffer is full, we should just spin until it
+ * clears.
+ */
+static int ehv_bc_console_byte_channel_send(unsigned int handle, const char *s,
+ unsigned int count)
+{
+ unsigned int len;
+ int ret = 0;
+
+ while (count) {
+ len = min_t(unsigned int, count, EV_BYTE_CHANNEL_MAX_BYTES);
+ do {
+ ret = ev_byte_channel_send(handle, &len, s);
+ } while (ret == EV_EAGAIN);
+ count -= len;
+ s += len;
+ }
+
+ return ret;
+}
+
+/*
+ * write a string to the console
+ *
+ * This function gets called to write a string from the kernel, typically from
+ * a printk(). This function spins until all data is written.
+ *
+ * We copy the data to a temporary buffer because we need to insert a \r in
+ * front of every \n. It's more efficient to copy the data to the buffer than
+ * it is to make multiple hcalls for each character or each newline.
+ */
+static void ehv_bc_console_write(struct console *co, const char *s,
+ unsigned int count)
+{
+ char s2[EV_BYTE_CHANNEL_MAX_BYTES];
+ unsigned int i, j = 0;
+ char c;
+
+ for (i = 0; i < count; i++) {
+ c = *s++;
+
+ if (c == '\n')
+ s2[j++] = '\r';
+
+ s2[j++] = c;
+ if (j >= (EV_BYTE_CHANNEL_MAX_BYTES - 1)) {
+ if (ehv_bc_console_byte_channel_send(stdout_bc, s2, j))
+ return;
+ j = 0;
+ }
+ }
+
+ if (j)
+ ehv_bc_console_byte_channel_send(stdout_bc, s2, j);
+}
+
+/*
+ * When /dev/console is opened, the kernel iterates the console list looking
+ * for one with ->device and then calls that method. On success, it expects
+ * the passed-in int* to contain the minor number to use.
+ */
+static struct tty_driver *ehv_bc_console_device(struct console *co, int *index)
+{
+ *index = co->index;
+
+ return ehv_bc_driver;
+}
+
+static struct console ehv_bc_console = {
+ .name = "ttyEHV",
+ .write = ehv_bc_console_write,
+ .device = ehv_bc_console_device,
+ .flags = CON_PRINTBUFFER | CON_ENABLED,
+};
+
+/*
+ * Console initialization
+ *
+ * This is the first function that is called after the device tree is
+ * available, so here is where we determine the byte channel handle and IRQ for
+ * stdout/stdin, even though that information is used by the tty and character
+ * drivers.
+ */
+static int __init ehv_bc_console_init(void)
+{
+ if (!find_console_handle()) {
+ pr_debug("ehv-bc: stdout is not a byte channel\n");
+ return -ENODEV;
+ }
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_EHV_BC
+ /* Print a friendly warning if the user chose the wrong byte channel
+ * handle for udbg.
+ */
+ if (stdout_bc != CONFIG_PPC_EARLY_DEBUG_EHV_BC_HANDLE)
+ pr_warning("ehv-bc: udbg handle %u is not the stdout handle\n",
+ CONFIG_PPC_EARLY_DEBUG_EHV_BC_HANDLE);
+#endif
+
+ /* add_preferred_console() must be called before register_console(),
+ otherwise it won't work. However, we don't want to enumerate all the
+ byte channels here, either, since we only care about one. */
+
+ add_preferred_console(ehv_bc_console.name, ehv_bc_console.index, NULL);
+ register_console(&ehv_bc_console);
+
+ pr_info("ehv-bc: registered console driver for byte channel %u\n",
+ stdout_bc);
+
+ return 0;
+}
+console_initcall(ehv_bc_console_init);
+
+/******************************** TTY DRIVER ********************************/
+
+/*
+ * byte channel receive interupt handler
+ *
+ * This ISR is called whenever data is available on a byte channel.
+ */
+static irqreturn_t ehv_bc_tty_rx_isr(int irq, void *data)
+{
+ struct ehv_bc_data *bc = data;
+ struct tty_struct *ttys = tty_port_tty_get(&bc->port);
+ unsigned int rx_count, tx_count, len;
+ int count;
+ char buffer[EV_BYTE_CHANNEL_MAX_BYTES];
+ int ret;
+
+ /* ttys could be NULL during a hangup */
+ if (!ttys)
+ return IRQ_HANDLED;
+
+ /* Find out how much data needs to be read, and then ask the TTY layer
+ * if it can handle that much. We want to ensure that every byte we
+ * read from the byte channel will be accepted by the TTY layer.
+ */
+ ev_byte_channel_poll(bc->handle, &rx_count, &tx_count);
+ count = tty_buffer_request_room(ttys, rx_count);
+
+ /* 'count' is the maximum amount of data the TTY layer can accept at
+ * this time. However, during testing, I was never able to get 'count'
+ * to be less than 'rx_count'. I'm not sure whether I'm calling it
+ * correctly.
+ */
+
+ while (count > 0) {
+ len = min_t(unsigned int, count, sizeof(buffer));
+
+ /* Read some data from the byte channel. This function will
+ * never return more than EV_BYTE_CHANNEL_MAX_BYTES bytes.
+ */
+ ev_byte_channel_receive(bc->handle, &len, buffer);
+
+ /* 'len' is now the amount of data that's been received. 'len'
+ * can't be zero, and most likely it's equal to one.
+ */
+
+ /* Pass the received data to the tty layer. */
+ ret = tty_insert_flip_string(ttys, buffer, len);
+
+ /* 'ret' is the number of bytes that the TTY layer accepted.
+ * If it's not equal to 'len', then it means the buffer is
+ * full, which should never happen. If it does happen, we can
+ * exit gracefully, but we drop the last 'len - ret' characters
+ * that we read from the byte channel.
+ */
+ if (ret != len)
+ break;
+
+ count -= len;
+ }
+
+ /* Tell the tty layer that we're done. */
+ tty_flip_buffer_push(ttys);
+
+ tty_kref_put(ttys);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * dequeue the transmit buffer to the hypervisor
+ *
+ * This function, which can be called in interrupt context, dequeues as much
+ * data as possible from the transmit buffer to the byte channel.
+ */
+static void ehv_bc_tx_dequeue(struct ehv_bc_data *bc)
+{
+ unsigned int count;
+ unsigned int len, ret;
+ unsigned long flags;
+
+ do {
+ spin_lock_irqsave(&bc->lock, flags);
+ len = min_t(unsigned int,
+ CIRC_CNT_TO_END(bc->head, bc->tail, BUF_SIZE),
+ EV_BYTE_CHANNEL_MAX_BYTES);
+
+ ret = ev_byte_channel_send(bc->handle, &len, bc->buf + bc->tail);
+
+ /* 'len' is valid only if the return code is 0 or EV_EAGAIN */
+ if (!ret || (ret == EV_EAGAIN))
+ bc->tail = (bc->tail + len) & (BUF_SIZE - 1);
+
+ count = CIRC_CNT(bc->head, bc->tail, BUF_SIZE);
+ spin_unlock_irqrestore(&bc->lock, flags);
+ } while (count && !ret);
+
+ spin_lock_irqsave(&bc->lock, flags);
+ if (CIRC_CNT(bc->head, bc->tail, BUF_SIZE))
+ /*
+ * If we haven't emptied the buffer, then enable the TX IRQ.
+ * We'll get an interrupt when there's more room in the
+ * hypervisor's output buffer.
+ */
+ enable_tx_interrupt(bc);
+ else
+ disable_tx_interrupt(bc);
+ spin_unlock_irqrestore(&bc->lock, flags);
+}
+
+/*
+ * byte channel transmit interupt handler
+ *
+ * This ISR is called whenever space becomes available for transmitting
+ * characters on a byte channel.
+ */
+static irqreturn_t ehv_bc_tty_tx_isr(int irq, void *data)
+{
+ struct ehv_bc_data *bc = data;
+ struct tty_struct *ttys = tty_port_tty_get(&bc->port);
+
+ ehv_bc_tx_dequeue(bc);
+ if (ttys) {
+ tty_wakeup(ttys);
+ tty_kref_put(ttys);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * This function is called when the tty layer has data for us send. We store
+ * the data first in a circular buffer, and then dequeue as much of that data
+ * as possible.
+ *
+ * We don't need to worry about whether there is enough room in the buffer for
+ * all the data. The purpose of ehv_bc_tty_write_room() is to tell the tty
+ * layer how much data it can safely send to us. We guarantee that
+ * ehv_bc_tty_write_room() will never lie, so the tty layer will never send us
+ * too much data.
+ */
+static int ehv_bc_tty_write(struct tty_struct *ttys, const unsigned char *s,
+ int count)
+{
+ struct ehv_bc_data *bc = ttys->driver_data;
+ unsigned long flags;
+ unsigned int len;
+ unsigned int written = 0;
+
+ while (1) {
+ spin_lock_irqsave(&bc->lock, flags);
+ len = CIRC_SPACE_TO_END(bc->head, bc->tail, BUF_SIZE);
+ if (count < len)
+ len = count;
+ if (len) {
+ memcpy(bc->buf + bc->head, s, len);
+ bc->head = (bc->head + len) & (BUF_SIZE - 1);
+ }
+ spin_unlock_irqrestore(&bc->lock, flags);
+ if (!len)
+ break;
+
+ s += len;
+ count -= len;
+ written += len;
+ }
+
+ ehv_bc_tx_dequeue(bc);
+
+ return written;
+}
+
+/*
+ * This function can be called multiple times for a given tty_struct, which is
+ * why we initialize bc->ttys in ehv_bc_tty_port_activate() instead.
+ *
+ * The tty layer will still call this function even if the device was not
+ * registered (i.e. tty_register_device() was not called). This happens
+ * because tty_register_device() is optional and some legacy drivers don't
+ * use it. So we need to check for that.
+ */
+static int ehv_bc_tty_open(struct tty_struct *ttys, struct file *filp)
+{
+ struct ehv_bc_data *bc = &bcs[ttys->index];
+
+ if (!bc->dev)
+ return -ENODEV;
+
+ return tty_port_open(&bc->port, ttys, filp);
+}
+
+/*
+ * Amazingly, if ehv_bc_tty_open() returns an error code, the tty layer will
+ * still call this function to close the tty device. So we can't assume that
+ * the tty port has been initialized.
+ */
+static void ehv_bc_tty_close(struct tty_struct *ttys, struct file *filp)
+{
+ struct ehv_bc_data *bc = &bcs[ttys->index];
+
+ if (bc->dev)
+ tty_port_close(&bc->port, ttys, filp);
+}
+
+/*
+ * Return the amount of space in the output buffer
+ *
+ * This is actually a contract between the driver and the tty layer outlining
+ * how much write room the driver can guarantee will be sent OR BUFFERED. This
+ * driver MUST honor the return value.
+ */
+static int ehv_bc_tty_write_room(struct tty_struct *ttys)
+{
+ struct ehv_bc_data *bc = ttys->driver_data;
+ unsigned long flags;
+ int count;
+
+ spin_lock_irqsave(&bc->lock, flags);
+ count = CIRC_SPACE(bc->head, bc->tail, BUF_SIZE);
+ spin_unlock_irqrestore(&bc->lock, flags);
+
+ return count;
+}
+
+/*
+ * Stop sending data to the tty layer
+ *
+ * This function is called when the tty layer's input buffers are getting full,
+ * so the driver should stop sending it data. The easiest way to do this is to
+ * disable the RX IRQ, which will prevent ehv_bc_tty_rx_isr() from being
+ * called.
+ *
+ * The hypervisor will continue to queue up any incoming data. If there is any
+ * data in the queue when the RX interrupt is enabled, we'll immediately get an
+ * RX interrupt.
+ */
+static void ehv_bc_tty_throttle(struct tty_struct *ttys)
+{
+ struct ehv_bc_data *bc = ttys->driver_data;
+
+ disable_irq(bc->rx_irq);
+}
+
+/*
+ * Resume sending data to the tty layer
+ *
+ * This function is called after previously calling ehv_bc_tty_throttle(). The
+ * tty layer's input buffers now have more room, so the driver can resume
+ * sending it data.
+ */
+static void ehv_bc_tty_unthrottle(struct tty_struct *ttys)
+{
+ struct ehv_bc_data *bc = ttys->driver_data;
+
+ /* If there is any data in the queue when the RX interrupt is enabled,
+ * we'll immediately get an RX interrupt.
+ */
+ enable_irq(bc->rx_irq);
+}
+
+static void ehv_bc_tty_hangup(struct tty_struct *ttys)
+{
+ struct ehv_bc_data *bc = ttys->driver_data;
+
+ ehv_bc_tx_dequeue(bc);
+ tty_port_hangup(&bc->port);
+}
+
+/*
+ * TTY driver operations
+ *
+ * If we could ask the hypervisor how much data is still in the TX buffer, or
+ * at least how big the TX buffers are, then we could implement the
+ * .wait_until_sent and .chars_in_buffer functions.
+ */
+static const struct tty_operations ehv_bc_ops = {
+ .open = ehv_bc_tty_open,
+ .close = ehv_bc_tty_close,
+ .write = ehv_bc_tty_write,
+ .write_room = ehv_bc_tty_write_room,
+ .throttle = ehv_bc_tty_throttle,
+ .unthrottle = ehv_bc_tty_unthrottle,
+ .hangup = ehv_bc_tty_hangup,
+};
+
+/*
+ * initialize the TTY port
+ *
+ * This function will only be called once, no matter how many times
+ * ehv_bc_tty_open() is called. That's why we register the ISR here, and also
+ * why we initialize tty_struct-related variables here.
+ */
+static int ehv_bc_tty_port_activate(struct tty_port *port,
+ struct tty_struct *ttys)
+{
+ struct ehv_bc_data *bc = container_of(port, struct ehv_bc_data, port);
+ int ret;
+
+ ttys->driver_data = bc;
+
+ ret = request_irq(bc->rx_irq, ehv_bc_tty_rx_isr, 0, "ehv-bc", bc);
+ if (ret < 0) {
+ dev_err(bc->dev, "could not request rx irq %u (ret=%i)\n",
+ bc->rx_irq, ret);
+ return ret;
+ }
+
+ /* request_irq also enables the IRQ */
+ bc->tx_irq_enabled = 1;
+
+ ret = request_irq(bc->tx_irq, ehv_bc_tty_tx_isr, 0, "ehv-bc", bc);
+ if (ret < 0) {
+ dev_err(bc->dev, "could not request tx irq %u (ret=%i)\n",
+ bc->tx_irq, ret);
+ free_irq(bc->rx_irq, bc);
+ return ret;
+ }
+
+ /* The TX IRQ is enabled only when we can't write all the data to the
+ * byte channel at once, so by default it's disabled.
+ */
+ disable_tx_interrupt(bc);
+
+ return 0;
+}
+
+static void ehv_bc_tty_port_shutdown(struct tty_port *port)
+{
+ struct ehv_bc_data *bc = container_of(port, struct ehv_bc_data, port);
+
+ free_irq(bc->tx_irq, bc);
+ free_irq(bc->rx_irq, bc);
+}
+
+static const struct tty_port_operations ehv_bc_tty_port_ops = {
+ .activate = ehv_bc_tty_port_activate,
+ .shutdown = ehv_bc_tty_port_shutdown,
+};
+
+static int __devinit ehv_bc_tty_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct ehv_bc_data *bc;
+ const uint32_t *iprop;
+ unsigned int handle;
+ int ret;
+ static unsigned int index = 1;
+ unsigned int i;
+
+ iprop = of_get_property(np, "hv-handle", NULL);
+ if (!iprop) {
+ dev_err(&pdev->dev, "no 'hv-handle' property in %s node\n",
+ np->name);
+ return -ENODEV;
+ }
+
+ /* We already told the console layer that the index for the console
+ * device is zero, so we need to make sure that we use that index when
+ * we probe the console byte channel node.
+ */
+ handle = be32_to_cpu(*iprop);
+ i = (handle == stdout_bc) ? 0 : index++;
+ bc = &bcs[i];
+
+ bc->handle = handle;
+ bc->head = 0;
+ bc->tail = 0;
+ spin_lock_init(&bc->lock);
+
+ bc->rx_irq = irq_of_parse_and_map(np, 0);
+ bc->tx_irq = irq_of_parse_and_map(np, 1);
+ if ((bc->rx_irq == NO_IRQ) || (bc->tx_irq == NO_IRQ)) {
+ dev_err(&pdev->dev, "no 'interrupts' property in %s node\n",
+ np->name);
+ ret = -ENODEV;
+ goto error;
+ }
+
+ bc->dev = tty_register_device(ehv_bc_driver, i, &pdev->dev);
+ if (IS_ERR(bc->dev)) {
+ ret = PTR_ERR(bc->dev);
+ dev_err(&pdev->dev, "could not register tty (ret=%i)\n", ret);
+ goto error;
+ }
+
+ tty_port_init(&bc->port);
+ bc->port.ops = &ehv_bc_tty_port_ops;
+
+ dev_set_drvdata(&pdev->dev, bc);
+
+ dev_info(&pdev->dev, "registered /dev/%s%u for byte channel %u\n",
+ ehv_bc_driver->name, i, bc->handle);
+
+ return 0;
+
+error:
+ irq_dispose_mapping(bc->tx_irq);
+ irq_dispose_mapping(bc->rx_irq);
+
+ memset(bc, 0, sizeof(struct ehv_bc_data));
+ return ret;
+}
+
+static int ehv_bc_tty_remove(struct platform_device *pdev)
+{
+ struct ehv_bc_data *bc = dev_get_drvdata(&pdev->dev);
+
+ tty_unregister_device(ehv_bc_driver, bc - bcs);
+
+ irq_dispose_mapping(bc->tx_irq);
+ irq_dispose_mapping(bc->rx_irq);
+
+ return 0;
+}
+
+static const struct of_device_id ehv_bc_tty_of_ids[] = {
+ { .compatible = "epapr,hv-byte-channel" },
+ {}
+};
+
+static struct platform_driver ehv_bc_tty_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "ehv-bc",
+ .of_match_table = ehv_bc_tty_of_ids,
+ },
+ .probe = ehv_bc_tty_probe,
+ .remove = ehv_bc_tty_remove,
+};
+
+/**
+ * ehv_bc_init - ePAPR hypervisor byte channel driver initialization
+ *
+ * This function is called when this module is loaded.
+ */
+static int __init ehv_bc_init(void)
+{
+ struct device_node *np;
+ unsigned int count = 0; /* Number of elements in bcs[] */
+ int ret;
+
+ pr_info("ePAPR hypervisor byte channel driver\n");
+
+ /* Count the number of byte channels */
+ for_each_compatible_node(np, NULL, "epapr,hv-byte-channel")
+ count++;
+
+ if (!count)
+ return -ENODEV;
+
+ /* The array index of an element in bcs[] is the same as the tty index
+ * for that element. If you know the address of an element in the
+ * array, then you can use pointer math (e.g. "bc - bcs") to get its
+ * tty index.
+ */
+ bcs = kzalloc(count * sizeof(struct ehv_bc_data), GFP_KERNEL);
+ if (!bcs)
+ return -ENOMEM;
+
+ ehv_bc_driver = alloc_tty_driver(count);
+ if (!ehv_bc_driver) {
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ ehv_bc_driver->owner = THIS_MODULE;
+ ehv_bc_driver->driver_name = "ehv-bc";
+ ehv_bc_driver->name = ehv_bc_console.name;
+ ehv_bc_driver->type = TTY_DRIVER_TYPE_CONSOLE;
+ ehv_bc_driver->subtype = SYSTEM_TYPE_CONSOLE;
+ ehv_bc_driver->init_termios = tty_std_termios;
+ ehv_bc_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+ tty_set_operations(ehv_bc_driver, &ehv_bc_ops);
+
+ ret = tty_register_driver(ehv_bc_driver);
+ if (ret) {
+ pr_err("ehv-bc: could not register tty driver (ret=%i)\n", ret);
+ goto error;
+ }
+
+ ret = platform_driver_register(&ehv_bc_tty_driver);
+ if (ret) {
+ pr_err("ehv-bc: could not register platform driver (ret=%i)\n",
+ ret);
+ goto error;
+ }
+
+ return 0;
+
+error:
+ if (ehv_bc_driver) {
+ tty_unregister_driver(ehv_bc_driver);
+ put_tty_driver(ehv_bc_driver);
+ }
+
+ kfree(bcs);
+
+ return ret;
+}
+
+
+/**
+ * ehv_bc_exit - ePAPR hypervisor byte channel driver termination
+ *
+ * This function is called when this driver is unloaded.
+ */
+static void __exit ehv_bc_exit(void)
+{
+ tty_unregister_driver(ehv_bc_driver);
+ put_tty_driver(ehv_bc_driver);
+ kfree(bcs);
+}
+
+module_init(ehv_bc_init);
+module_exit(ehv_bc_exit);
+
+MODULE_AUTHOR("Timur Tabi <timur@freescale.com>");
+MODULE_DESCRIPTION("ePAPR hypervisor byte channel driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index e1aaf4f309b3..7430bc3c8d53 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -388,7 +388,7 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
* there is no buffered data otherwise sleeps on a wait queue
* waking periodically to check chars_in_buffer().
*/
- tty_wait_until_sent(tty, HVC_CLOSE_WAIT);
+ tty_wait_until_sent_from_close(tty, HVC_CLOSE_WAIT);
} else {
if (hp->count < 0)
printk(KERN_ERR "hvc_close %X: oops, count is %d\n",
@@ -852,7 +852,7 @@ struct hvc_struct *hvc_alloc(uint32_t vtermno, int data,
* find index to use:
* see if this vterm id matches one registered for console.
*/
- for (i=0; i < MAX_NR_HVC_CONSOLES; i++)
+ for (i = 0; i < MAX_NR_HVC_CONSOLES; i++)
if (vtermnos[i] == hp->vtermno &&
cons_ops[i] == hp->ops)
break;
@@ -862,9 +862,13 @@ struct hvc_struct *hvc_alloc(uint32_t vtermno, int data,
i = ++last_hvc;
hp->index = i;
+ hvc_console.index = i;
+ vtermnos[i] = vtermno;
+ cons_ops[i] = ops;
list_add_tail(&(hp->next), &hvc_structs);
spin_unlock(&hvc_structs_lock);
+ register_console(&hvc_console);
return hp;
}
@@ -875,6 +879,7 @@ int hvc_remove(struct hvc_struct *hp)
unsigned long flags;
struct tty_struct *tty;
+ unregister_console(&hvc_console);
spin_lock_irqsave(&hp->lock, flags);
tty = tty_kref_get(hp->tty);
diff --git a/drivers/tty/hvc/hvc_irq.c b/drivers/tty/hvc/hvc_irq.c
index 2623e177e8d6..c9adb0559f61 100644
--- a/drivers/tty/hvc/hvc_irq.c
+++ b/drivers/tty/hvc/hvc_irq.c
@@ -28,7 +28,7 @@ int notifier_add_irq(struct hvc_struct *hp, int irq)
hp->irq_requested = 0;
return 0;
}
- rc = request_irq(irq, hvc_handle_interrupt, IRQF_DISABLED,
+ rc = request_irq(irq, hvc_handle_interrupt, 0,
"hvc_console", hp);
if (!rc)
hp->irq_requested = 1;
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index 4c8b66546930..55882b5930a6 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -1057,7 +1057,7 @@ static int hvcs_enable_device(struct hvcs_struct *hvcsd, uint32_t unit_address,
* the conn was registered and now.
*/
if (!(rc = request_irq(irq, &hvcs_handle_interrupt,
- IRQF_DISABLED, "ibmhvcs", hvcsd))) {
+ 0, "ibmhvcs", hvcsd))) {
/*
* It is possible the vty-server was removed after the irq was
* requested but before we have time to enable interrupts.
@@ -1237,7 +1237,7 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp)
irq = hvcsd->vdev->irq;
spin_unlock_irqrestore(&hvcsd->lock, flags);
- tty_wait_until_sent(tty, HVCS_CLOSE_WAIT);
+ tty_wait_until_sent_from_close(tty, HVCS_CLOSE_WAIT);
/*
* This line is important because it tells hvcs_open that this
diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c
index c94e2f5853d8..cdfa3e02d627 100644
--- a/drivers/tty/hvc/hvsi.c
+++ b/drivers/tty/hvc/hvsi.c
@@ -1105,7 +1105,7 @@ static int __init hvsi_init(void)
struct hvsi_struct *hp = &hvsi_ports[i];
int ret = 1;
- ret = request_irq(hp->virq, hvsi_interrupt, IRQF_DISABLED, "hvsi", hp);
+ ret = request_irq(hp->virq, hvsi_interrupt, 0, "hvsi", hp);
if (ret)
printk(KERN_ERR "HVSI: couldn't reserve irq 0x%x (error %i)\n",
hp->virq, ret);
diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c
index db1cf9c328d8..e5c295ab5dec 100644
--- a/drivers/tty/isicom.c
+++ b/drivers/tty/isicom.c
@@ -1598,7 +1598,7 @@ static int __devinit isicom_probe(struct pci_dev *pdev,
}
retval = request_irq(board->irq, isicom_interrupt,
- IRQF_SHARED | IRQF_DISABLED, ISICOM_NAME, board);
+ IRQF_SHARED, ISICOM_NAME, board);
if (retval < 0) {
dev_err(&pdev->dev, "Could not install handler at Irq %d. "
"Card%d will be disabled.\n", board->irq, index + 1);
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index 7fc8c02fea6c..8998d527232a 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -2005,16 +2005,9 @@ static void mxser_wait_until_sent(struct tty_struct *tty, int timeout)
*/
if (!timeout || timeout > 2 * info->timeout)
timeout = 2 * info->timeout;
-#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
- printk(KERN_DEBUG "In rs_wait_until_sent(%d) check=%lu...",
- timeout, char_time);
- printk("jiff=%lu...", jiffies);
-#endif
+
spin_lock_irqsave(&info->slock, flags);
while (!((lsr = inb(info->ioaddr + UART_LSR)) & UART_LSR_TEMT)) {
-#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
- printk("lsr = %d (jiff=%lu)...", lsr, jiffies);
-#endif
spin_unlock_irqrestore(&info->slock, flags);
schedule_timeout_interruptible(char_time);
spin_lock_irqsave(&info->slock, flags);
@@ -2025,10 +2018,6 @@ static void mxser_wait_until_sent(struct tty_struct *tty, int timeout)
}
spin_unlock_irqrestore(&info->slock, flags);
set_current_state(TASK_RUNNING);
-
-#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
- printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
-#endif
}
/*
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 8a50e4eebf18..4cb0d0a3e57b 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -21,7 +21,6 @@
* Mostly done: ioctls for setting modes/timing
* Partly done: hooks so you can pull off frames to non tty devs
* Restart DLCI 0 when it closes ?
- * Test basic encoding
* Improve the tx engine
* Resolve tx side locking by adding a queue_head and routing
* all control traffic via it
@@ -810,38 +809,41 @@ static int gsm_dlci_data_output(struct gsm_mux *gsm, struct gsm_dlci *dlci)
{
struct gsm_msg *msg;
u8 *dp;
- int len, size;
+ int len, total_size, size;
int h = dlci->adaption - 1;
- len = kfifo_len(dlci->fifo);
- if (len == 0)
- return 0;
-
- /* MTU/MRU count only the data bits */
- if (len > gsm->mtu)
- len = gsm->mtu;
-
- size = len + h;
-
- msg = gsm_data_alloc(gsm, dlci->addr, size, gsm->ftype);
- /* FIXME: need a timer or something to kick this so it can't
- get stuck with no work outstanding and no buffer free */
- if (msg == NULL)
- return -ENOMEM;
- dp = msg->data;
- switch (dlci->adaption) {
- case 1: /* Unstructured */
- break;
- case 2: /* Unstructed with modem bits. Always one byte as we never
- send inline break data */
- *dp += gsm_encode_modem(dlci);
- len--;
- break;
+ total_size = 0;
+ while(1) {
+ len = kfifo_len(dlci->fifo);
+ if (len == 0)
+ return total_size;
+
+ /* MTU/MRU count only the data bits */
+ if (len > gsm->mtu)
+ len = gsm->mtu;
+
+ size = len + h;
+
+ msg = gsm_data_alloc(gsm, dlci->addr, size, gsm->ftype);
+ /* FIXME: need a timer or something to kick this so it can't
+ get stuck with no work outstanding and no buffer free */
+ if (msg == NULL)
+ return -ENOMEM;
+ dp = msg->data;
+ switch (dlci->adaption) {
+ case 1: /* Unstructured */
+ break;
+ case 2: /* Unstructed with modem bits. Always one byte as we never
+ send inline break data */
+ *dp++ = gsm_encode_modem(dlci);
+ break;
+ }
+ WARN_ON(kfifo_out_locked(dlci->fifo, dp , len, &dlci->lock) != len);
+ __gsm_data_queue(dlci, msg);
+ total_size += size;
}
- WARN_ON(kfifo_out_locked(dlci->fifo, dp , len, &dlci->lock) != len);
- __gsm_data_queue(dlci, msg);
/* Bytes of data we used up */
- return size;
+ return total_size;
}
/**
@@ -2004,6 +2006,7 @@ void gsm_cleanup_mux(struct gsm_mux *gsm)
int i;
struct gsm_dlci *dlci = gsm->dlci[0];
struct gsm_msg *txq;
+ struct gsm_control *gc;
gsm->dead = 1;
@@ -2017,6 +2020,13 @@ void gsm_cleanup_mux(struct gsm_mux *gsm)
spin_unlock(&gsm_mux_lock);
WARN_ON(i == MAX_MUX);
+ /* In theory disconnecting DLCI 0 is sufficient but for some
+ modems this is apparently not the case. */
+ if (dlci) {
+ gc = gsm_control_send(gsm, CMD_CLD, NULL, 0);
+ if (gc)
+ gsm_control_wait(gsm, gc);
+ }
del_timer_sync(&gsm->t2_timer);
/* Now we are sure T2 has stopped */
if (dlci) {
@@ -2982,7 +2992,7 @@ static int gsmtty_tiocmset(struct tty_struct *tty,
struct gsm_dlci *dlci = tty->driver_data;
unsigned int modem_tx = dlci->modem_tx;
- modem_tx &= clear;
+ modem_tx &= ~clear;
modem_tx |= set;
if (modem_tx != dlci->modem_tx) {
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index e809e9d4683c..e18604b3fc7d 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -670,12 +670,18 @@ static int ptmx_open(struct inode *inode, struct file *filp)
nonseekable_open(inode, filp);
+ retval = tty_alloc_file(filp);
+ if (retval)
+ return retval;
+
/* find a device that is not in use. */
tty_lock();
index = devpts_new_index(inode);
tty_unlock();
- if (index < 0)
- return index;
+ if (index < 0) {
+ retval = index;
+ goto err_file;
+ }
mutex_lock(&tty_mutex);
tty_lock();
@@ -689,27 +695,27 @@ static int ptmx_open(struct inode *inode, struct file *filp)
set_bit(TTY_PTY_LOCK, &tty->flags); /* LOCK THE SLAVE */
- retval = tty_add_file(tty, filp);
- if (retval)
- goto out;
+ tty_add_file(tty, filp);
retval = devpts_pty_new(inode, tty->link);
if (retval)
- goto out1;
+ goto err_release;
retval = ptm_driver->ops->open(tty, filp);
if (retval)
- goto out2;
-out1:
+ goto err_release;
+
tty_unlock();
- return retval;
-out2:
+ return 0;
+err_release:
tty_unlock();
tty_release(inode, filp);
return retval;
out:
devpts_kill_index(inode, index);
tty_unlock();
+err_file:
+ tty_free_file(filp);
return retval;
}
diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c
index e0a77540b8ca..a88ef9782a4f 100644
--- a/drivers/tty/serial/68328serial.c
+++ b/drivers/tty/serial/68328serial.c
@@ -235,22 +235,6 @@ static void batten_down_hatches(void)
static void status_handle(struct m68k_serial *info, unsigned short status)
{
-#if 0
- if(status & DCD) {
- if((info->port.tty->termios->c_cflag & CRTSCTS) &&
- ((info->curregs[3] & AUTO_ENAB)==0)) {
- info->curregs[3] |= AUTO_ENAB;
- info->pendregs[3] |= AUTO_ENAB;
- write_zsreg(info->m68k_channel, 3, info->curregs[3]);
- }
- } else {
- if((info->curregs[3] & AUTO_ENAB)) {
- info->curregs[3] &= ~AUTO_ENAB;
- info->pendregs[3] &= ~AUTO_ENAB;
- write_zsreg(info->m68k_channel, 3, info->curregs[3]);
- }
- }
-#endif
/* If this is console input and this is a
* 'break asserted' status change interrupt
* see if we can drop into the debugger
@@ -340,9 +324,6 @@ static void transmit_chars(struct m68k_serial *info)
info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
info->xmit_cnt--;
- if (info->xmit_cnt < WAKEUP_CHARS)
- schedule_work(&info->tqueue);
-
if(info->xmit_cnt <= 0) {
/* All done for now... TX ints off */
uart->ustcnt &= ~USTCNT_TX_INTR_MASK;
@@ -378,21 +359,6 @@ irqreturn_t rs_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static void do_softint(struct work_struct *work)
-{
- struct m68k_serial *info = container_of(work, struct m68k_serial, tqueue);
- struct tty_struct *tty;
-
- tty = info->tty;
- if (!tty)
- return;
-#if 0
- if (clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) {
- tty_wakeup(tty);
- }
-#endif
-}
-
static int startup(struct m68k_serial * info)
{
m68328_uart *uart = &uart_addr[info->line];
@@ -1324,7 +1290,6 @@ rs68328_init(void)
info->event = 0;
info->count = 0;
info->blocked_open = 0;
- INIT_WORK(&info->tqueue, do_softint);
init_waitqueue_head(&info->open_wait);
init_waitqueue_head(&info->close_wait);
info->line = i;
@@ -1341,7 +1306,7 @@ rs68328_init(void)
if (request_irq(uart_irqs[i],
rs_interrupt,
- IRQF_DISABLED,
+ 0,
"M68328_UART", info))
panic("Unable to attach 68328 serial interrupt\n");
}
diff --git a/drivers/tty/serial/68328serial.h b/drivers/tty/serial/68328serial.h
index 8c9c3c0745db..3d2faabd766f 100644
--- a/drivers/tty/serial/68328serial.h
+++ b/drivers/tty/serial/68328serial.h
@@ -158,7 +158,6 @@ struct m68k_serial {
int xmit_head;
int xmit_tail;
int xmit_cnt;
- struct work_struct tqueue;
wait_queue_head_t open_wait;
wait_queue_head_t close_wait;
};
diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
index 7f50999eebc2..a87a56cb5417 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250.c
@@ -309,6 +309,13 @@ static const struct serial8250_config uart_config[] = {
UART_FCR_T_TRIG_01,
.flags = UART_CAP_FIFO | UART_CAP_RTOIE,
},
+ [PORT_XR17D15X] = {
+ .name = "XR17D15X",
+ .fifo_size = 64,
+ .tx_loadsz = 64,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR,
+ },
};
#if defined(CONFIG_MIPS_ALCHEMY)
@@ -461,42 +468,6 @@ static void tsi_serial_out(struct uart_port *p, int offset, int value)
writeb(value, p->membase + offset);
}
-/* Save the LCR value so it can be re-written when a Busy Detect IRQ occurs. */
-static inline void dwapb_save_out_value(struct uart_port *p, int offset,
- int value)
-{
- struct uart_8250_port *up =
- container_of(p, struct uart_8250_port, port);
-
- if (offset == UART_LCR)
- up->lcr = value;
-}
-
-/* Read the IER to ensure any interrupt is cleared before returning from ISR. */
-static inline void dwapb_check_clear_ier(struct uart_port *p, int offset)
-{
- if (offset == UART_TX || offset == UART_IER)
- p->serial_in(p, UART_IER);
-}
-
-static void dwapb_serial_out(struct uart_port *p, int offset, int value)
-{
- int save_offset = offset;
- offset = map_8250_out_reg(p, offset) << p->regshift;
- dwapb_save_out_value(p, save_offset, value);
- writeb(value, p->membase + offset);
- dwapb_check_clear_ier(p, save_offset);
-}
-
-static void dwapb32_serial_out(struct uart_port *p, int offset, int value)
-{
- int save_offset = offset;
- offset = map_8250_out_reg(p, offset) << p->regshift;
- dwapb_save_out_value(p, save_offset, value);
- writel(value, p->membase + offset);
- dwapb_check_clear_ier(p, save_offset);
-}
-
static unsigned int io_serial_in(struct uart_port *p, int offset)
{
offset = map_8250_in_reg(p, offset) << p->regshift;
@@ -509,6 +480,8 @@ static void io_serial_out(struct uart_port *p, int offset, int value)
outb(value, p->iobase + offset);
}
+static int serial8250_default_handle_irq(struct uart_port *port);
+
static void set_io_from_upio(struct uart_port *p)
{
struct uart_8250_port *up =
@@ -540,16 +513,6 @@ static void set_io_from_upio(struct uart_port *p)
p->serial_out = tsi_serial_out;
break;
- case UPIO_DWAPB:
- p->serial_in = mem_serial_in;
- p->serial_out = dwapb_serial_out;
- break;
-
- case UPIO_DWAPB32:
- p->serial_in = mem32_serial_in;
- p->serial_out = dwapb32_serial_out;
- break;
-
default:
p->serial_in = io_serial_in;
p->serial_out = io_serial_out;
@@ -557,6 +520,7 @@ static void set_io_from_upio(struct uart_port *p)
}
/* Remember loaded iotype */
up->cur_iotype = p->iotype;
+ p->handle_irq = serial8250_default_handle_irq;
}
static void
@@ -567,8 +531,6 @@ serial_out_sync(struct uart_8250_port *up, int offset, int value)
case UPIO_MEM:
case UPIO_MEM32:
case UPIO_AU:
- case UPIO_DWAPB:
- case UPIO_DWAPB32:
p->serial_out(p, offset, value);
p->serial_in(p, UART_LCR); /* safe, no side-effects */
break;
@@ -1120,6 +1082,14 @@ static void autoconfig_16550a(struct uart_8250_port *up)
serial_outp(up, UART_IER, iersave);
/*
+ * Exar uarts have EFR in a weird location
+ */
+ if (up->port.flags & UPF_EXAR_EFR) {
+ up->port.type = PORT_XR17D15X;
+ up->capabilities |= UART_CAP_AFE | UART_CAP_EFR;
+ }
+
+ /*
* We distinguish between 16550A and U6 16550A by counting
* how many bytes are in the FIFO.
*/
@@ -1621,6 +1591,29 @@ static void serial8250_handle_port(struct uart_8250_port *up)
spin_unlock_irqrestore(&up->port.lock, flags);
}
+int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+
+ if (!(iir & UART_IIR_NO_INT)) {
+ serial8250_handle_port(up);
+ return 1;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(serial8250_handle_irq);
+
+static int serial8250_default_handle_irq(struct uart_port *port)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+ unsigned int iir = serial_in(up, UART_IIR);
+
+ return serial8250_handle_irq(port, iir);
+}
+
/*
* This is the serial driver's interrupt routine.
*
@@ -1648,30 +1641,13 @@ static irqreturn_t serial8250_interrupt(int irq, void *dev_id)
l = i->head;
do {
struct uart_8250_port *up;
- unsigned int iir;
+ struct uart_port *port;
up = list_entry(l, struct uart_8250_port, list);
+ port = &up->port;
- iir = serial_in(up, UART_IIR);
- if (!(iir & UART_IIR_NO_INT)) {
- serial8250_handle_port(up);
-
+ if (port->handle_irq(port)) {
handled = 1;
-
- end = NULL;
- } else if ((up->port.iotype == UPIO_DWAPB ||
- up->port.iotype == UPIO_DWAPB32) &&
- (iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
- /* The DesignWare APB UART has an Busy Detect (0x07)
- * interrupt meaning an LCR write attempt occurred while the
- * UART was busy. The interrupt must be cleared by reading
- * the UART status register (USR) and the LCR re-written. */
- unsigned int status;
- status = *(volatile u32 *)up->port.private_data;
- serial_out(up, UART_LCR, up->lcr);
-
- handled = 1;
-
end = NULL;
} else if (end == NULL)
end = l;
@@ -2081,8 +2057,8 @@ static int serial8250_startup(struct uart_port *port)
*/
if (!(up->port.flags & UPF_BUGGY_UART) &&
(serial_inp(up, UART_LSR) == 0xff)) {
- printk(KERN_INFO "ttyS%d: LSR safety check engaged!\n",
- serial_index(&up->port));
+ printk_ratelimited(KERN_INFO "ttyS%d: LSR safety check engaged!\n",
+ serial_index(&up->port));
return -ENODEV;
}
@@ -2458,7 +2434,10 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
efr |= UART_EFR_CTS;
serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B);
- serial_outp(up, UART_EFR, efr);
+ if (up->port.flags & UPF_EXAR_EFR)
+ serial_outp(up, UART_XR_EFR, efr);
+ else
+ serial_outp(up, UART_EFR, efr);
}
#ifdef CONFIG_ARCH_OMAP
@@ -2570,8 +2549,6 @@ static int serial8250_request_std_resource(struct uart_8250_port *up)
case UPIO_TSI:
case UPIO_MEM32:
case UPIO_MEM:
- case UPIO_DWAPB:
- case UPIO_DWAPB32:
if (!up->port.mapbase)
break;
@@ -2608,8 +2585,6 @@ static void serial8250_release_std_resource(struct uart_8250_port *up)
case UPIO_TSI:
case UPIO_MEM32:
case UPIO_MEM:
- case UPIO_DWAPB:
- case UPIO_DWAPB32:
if (!up->port.mapbase)
break;
@@ -3050,6 +3025,10 @@ int __init early_serial_setup(struct uart_port *port)
p->serial_in = port->serial_in;
if (port->serial_out)
p->serial_out = port->serial_out;
+ if (port->handle_irq)
+ p->handle_irq = port->handle_irq;
+ else
+ p->handle_irq = serial8250_default_handle_irq;
return 0;
}
@@ -3118,6 +3097,7 @@ static int __devinit serial8250_probe(struct platform_device *dev)
port.type = p->type;
port.serial_in = p->serial_in;
port.serial_out = p->serial_out;
+ port.handle_irq = p->handle_irq;
port.set_termios = p->set_termios;
port.pm = p->pm;
port.dev = &dev->dev;
@@ -3283,6 +3263,8 @@ int serial8250_register_port(struct uart_port *port)
uart->port.serial_in = port->serial_in;
if (port->serial_out)
uart->port.serial_out = port->serial_out;
+ if (port->handle_irq)
+ uart->port.handle_irq = port->handle_irq;
/* Possibly override set_termios call */
if (port->set_termios)
uart->port.set_termios = port->set_termios;
diff --git a/drivers/tty/serial/8250_dw.c b/drivers/tty/serial/8250_dw.c
new file mode 100644
index 000000000000..bf1fba640c2d
--- /dev/null
+++ b/drivers/tty/serial/8250_dw.c
@@ -0,0 +1,194 @@
+/*
+ * Synopsys DesignWare 8250 driver.
+ *
+ * Copyright 2011 Picochip, Jamie Iles.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The Synopsys DesignWare 8250 has an extra feature whereby it detects if the
+ * LCR is written whilst busy. If it is, then a busy detect interrupt is
+ * raised, the LCR needs to be rewritten and the uart status register read.
+ */
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+struct dw8250_data {
+ int last_lcr;
+ int line;
+};
+
+static void dw8250_serial_out(struct uart_port *p, int offset, int value)
+{
+ struct dw8250_data *d = p->private_data;
+
+ if (offset == UART_LCR)
+ d->last_lcr = value;
+
+ offset <<= p->regshift;
+ writeb(value, p->membase + offset);
+}
+
+static unsigned int dw8250_serial_in(struct uart_port *p, int offset)
+{
+ offset <<= p->regshift;
+
+ return readb(p->membase + offset);
+}
+
+static void dw8250_serial_out32(struct uart_port *p, int offset, int value)
+{
+ struct dw8250_data *d = p->private_data;
+
+ if (offset == UART_LCR)
+ d->last_lcr = value;
+
+ offset <<= p->regshift;
+ writel(value, p->membase + offset);
+}
+
+static unsigned int dw8250_serial_in32(struct uart_port *p, int offset)
+{
+ offset <<= p->regshift;
+
+ return readl(p->membase + offset);
+}
+
+/* Offset for the DesignWare's UART Status Register. */
+#define UART_USR 0x1f
+
+static int dw8250_handle_irq(struct uart_port *p)
+{
+ struct dw8250_data *d = p->private_data;
+ unsigned int iir = p->serial_in(p, UART_IIR);
+
+ if (serial8250_handle_irq(p, iir)) {
+ return 1;
+ } else if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
+ /* Clear the USR and write the LCR again. */
+ (void)p->serial_in(p, UART_USR);
+ p->serial_out(p, d->last_lcr, UART_LCR);
+
+ return 1;
+ }
+
+ return 0;
+}
+
+static int __devinit dw8250_probe(struct platform_device *pdev)
+{
+ struct uart_port port = {};
+ struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ struct device_node *np = pdev->dev.of_node;
+ u32 val;
+ struct dw8250_data *data;
+
+ if (!regs || !irq) {
+ dev_err(&pdev->dev, "no registers/irq defined\n");
+ return -EINVAL;
+ }
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+ port.private_data = data;
+
+ spin_lock_init(&port.lock);
+ port.mapbase = regs->start;
+ port.irq = irq->start;
+ port.handle_irq = dw8250_handle_irq;
+ port.type = PORT_8250;
+ port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP |
+ UPF_FIXED_PORT | UPF_FIXED_TYPE;
+ port.dev = &pdev->dev;
+
+ port.iotype = UPIO_MEM;
+ port.serial_in = dw8250_serial_in;
+ port.serial_out = dw8250_serial_out;
+ if (!of_property_read_u32(np, "reg-io-width", &val)) {
+ switch (val) {
+ case 1:
+ break;
+ case 4:
+ port.iotype = UPIO_MEM32;
+ port.serial_in = dw8250_serial_in32;
+ port.serial_out = dw8250_serial_out32;
+ break;
+ default:
+ dev_err(&pdev->dev, "unsupported reg-io-width (%u)\n",
+ val);
+ return -EINVAL;
+ }
+ }
+
+ if (!of_property_read_u32(np, "reg-shift", &val))
+ port.regshift = val;
+
+ if (of_property_read_u32(np, "clock-frequency", &val)) {
+ dev_err(&pdev->dev, "no clock-frequency property set\n");
+ return -EINVAL;
+ }
+ port.uartclk = val;
+
+ data->line = serial8250_register_port(&port);
+ if (data->line < 0)
+ return data->line;
+
+ platform_set_drvdata(pdev, data);
+
+ return 0;
+}
+
+static int __devexit dw8250_remove(struct platform_device *pdev)
+{
+ struct dw8250_data *data = platform_get_drvdata(pdev);
+
+ serial8250_unregister_port(data->line);
+
+ return 0;
+}
+
+static const struct of_device_id dw8250_match[] = {
+ { .compatible = "snps,dw-apb-uart" },
+ { /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, dw8250_match);
+
+static struct platform_driver dw8250_platform_driver = {
+ .driver = {
+ .name = "dw-apb-uart",
+ .owner = THIS_MODULE,
+ .of_match_table = dw8250_match,
+ },
+ .probe = dw8250_probe,
+ .remove = __devexit_p(dw8250_remove),
+};
+
+static int __init dw8250_init(void)
+{
+ return platform_driver_register(&dw8250_platform_driver);
+}
+module_init(dw8250_init);
+
+static void __exit dw8250_exit(void)
+{
+ platform_driver_unregister(&dw8250_platform_driver);
+}
+module_exit(dw8250_exit);
+
+MODULE_AUTHOR("Jamie Iles");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Synopsys DesignWare 8250 serial port driver");
diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c
index 3abeca2a2a1b..825937a5f210 100644
--- a/drivers/tty/serial/8250_pci.c
+++ b/drivers/tty/serial/8250_pci.c
@@ -1101,6 +1101,15 @@ static int pci_eg20t_init(struct pci_dev *dev)
#endif
}
+static int
+pci_xr17c154_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_port *port, int idx)
+{
+ port->flags |= UPF_EXAR_EFR;
+ return pci_default_setup(priv, board, port, idx);
+}
+
/* This should be in linux/pci_ids.h */
#define PCI_VENDOR_ID_SBSMODULARIO 0x124B
#define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B
@@ -1506,6 +1515,30 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.setup = pci_timedia_setup,
},
/*
+ * Exar cards
+ */
+ {
+ .vendor = PCI_VENDOR_ID_EXAR,
+ .device = PCI_DEVICE_ID_EXAR_XR17C152,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_xr17c154_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_EXAR,
+ .device = PCI_DEVICE_ID_EXAR_XR17C154,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_xr17c154_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_EXAR,
+ .device = PCI_DEVICE_ID_EXAR_XR17C158,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_xr17c154_setup,
+ },
+ /*
* Xircom cards
*/
{
@@ -1558,46 +1591,55 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x8811,
.init = pci_eg20t_init,
+ .setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x8812,
.init = pci_eg20t_init,
+ .setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x8813,
.init = pci_eg20t_init,
+ .setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x8814,
.init = pci_eg20t_init,
+ .setup = pci_default_setup,
},
{
.vendor = 0x10DB,
.device = 0x8027,
.init = pci_eg20t_init,
+ .setup = pci_default_setup,
},
{
.vendor = 0x10DB,
.device = 0x8028,
.init = pci_eg20t_init,
+ .setup = pci_default_setup,
},
{
.vendor = 0x10DB,
.device = 0x8029,
.init = pci_eg20t_init,
+ .setup = pci_default_setup,
},
{
.vendor = 0x10DB,
.device = 0x800C,
.init = pci_eg20t_init,
+ .setup = pci_default_setup,
},
{
.vendor = 0x10DB,
.device = 0x800D,
.init = pci_eg20t_init,
+ .setup = pci_default_setup,
},
/*
* Cronyx Omega PCI (PLX-chip based)
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 4dcb37bbdf92..5f479dada6f2 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -267,6 +267,13 @@ config SERIAL_8250_RM9K
port hardware found on MIPS RM9122 and similar processors.
If unsure, say N.
+config SERIAL_8250_DW
+ tristate "Support for Synopsys DesignWare 8250 quirks"
+ depends on SERIAL_8250 && OF
+ help
+ Selecting this option will enable handling of the extra features
+ present in the Synopsys DesignWare APB UART.
+
comment "Non-8250 serial port support"
config SERIAL_AMBA_PL010
@@ -522,8 +529,8 @@ config SERIAL_S3C6400
config SERIAL_S5PV210
tristate "Samsung S5PV210 Serial port support"
- depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_EXYNOS4210)
- select SERIAL_SAMSUNG_UARTS_4 if (CPU_S5PV210 || CPU_EXYNOS4210)
+ depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_EXYNOS4210 || SOC_EXYNOS4212)
+ select SERIAL_SAMSUNG_UARTS_4 if (CPU_S5PV210 || CPU_EXYNOS4210 || SOC_EXYNOS4212)
default y
help
Serial port support for Samsung's S5P Family of SoC's
@@ -722,7 +729,7 @@ config SERIAL_BFIN
Add support for the built-in UARTs on the Blackfin.
To compile this driver as a module, choose M here: the
- module will be called bfin_5xx.
+ module is named bfin_uart.ko.
config SERIAL_BFIN_CONSOLE
bool "Console on Blackfin serial port"
@@ -1035,23 +1042,6 @@ config SERIAL_MCF_CONSOLE
help
Enable a ColdFire internal serial port to be the system console.
-config SERIAL_68360_SMC
- bool "68360 SMC uart support"
- depends on M68360
- help
- This driver supports the SMC serial ports of the Motorola 68360 CPU.
-
-config SERIAL_68360_SCC
- bool "68360 SCC uart support"
- depends on M68360
- help
- This driver supports the SCC serial ports of the Motorola 68360 CPU.
-
-config SERIAL_68360
- bool
- depends on SERIAL_68360_SMC || SERIAL_68360_SCC
- default y
-
config SERIAL_PMACZILOG
tristate "Mac or PowerMac z85c30 ESCC support"
depends on (M68K && MAC) || (PPC_OF && PPC_PMAC)
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 83b4da6a1062..e10cf5b54b6d 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o
obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o
obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
+obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o
obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
@@ -35,7 +36,7 @@ obj-$(CONFIG_SERIAL_PXA) += pxa.o
obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o
obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o
-obj-$(CONFIG_SERIAL_BFIN) += bfin_5xx.o
+obj-$(CONFIG_SERIAL_BFIN) += bfin_uart.o
obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o
obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o
obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o
@@ -49,7 +50,6 @@ obj-$(CONFIG_SERIAL_MAX3107_AAVA) += max3107-aava.o
obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
obj-$(CONFIG_SERIAL_MUX) += mux.o
obj-$(CONFIG_SERIAL_68328) += 68328serial.o
-obj-$(CONFIG_SERIAL_68360) += 68360serial.o
obj-$(CONFIG_SERIAL_MCF) += mcf.o
obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
obj-$(CONFIG_SERIAL_DZ) += dz.o
diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c
index 60e049b041a7..00a73ecb2dfb 100644
--- a/drivers/tty/serial/altera_jtaguart.c
+++ b/drivers/tty/serial/altera_jtaguart.c
@@ -218,7 +218,7 @@ static int altera_jtaguart_startup(struct uart_port *port)
unsigned long flags;
int ret;
- ret = request_irq(port->irq, altera_jtaguart_interrupt, IRQF_DISABLED,
+ ret = request_irq(port->irq, altera_jtaguart_interrupt, 0,
DRV_NAME, port);
if (ret) {
pr_err(DRV_NAME ": unable to attach Altera JTAG UART %d "
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index 50bc5a5ac653..d902558ccfd2 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -315,7 +315,7 @@ static int altera_uart_startup(struct uart_port *port)
return 0;
}
- ret = request_irq(port->irq, altera_uart_interrupt, IRQF_DISABLED,
+ ret = request_irq(port->irq, altera_uart_interrupt, 0,
DRV_NAME, port);
if (ret) {
pr_err(DRV_NAME ": unable to attach Altera UART %d "
diff --git a/drivers/tty/serial/apbuart.c b/drivers/tty/serial/apbuart.c
index 19a943693e4c..77554fd68d1f 100644
--- a/drivers/tty/serial/apbuart.c
+++ b/drivers/tty/serial/apbuart.c
@@ -16,6 +16,7 @@
#include <linux/module.h>
#include <linux/tty.h>
+#include <linux/tty_flip.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/serial.h>
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index b922f5d2e61e..9988c0c305c2 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -33,6 +33,8 @@
#include <linux/sysrq.h>
#include <linux/tty_flip.h>
#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/dma-mapping.h>
#include <linux/atmel_pdc.h>
#include <linux/atmel_serial.h>
@@ -157,11 +159,22 @@ struct atmel_uart_port {
};
static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
+static unsigned long atmel_ports_in_use;
#ifdef SUPPORT_SYSRQ
static struct console atmel_console;
#endif
+#if defined(CONFIG_OF)
+static const struct of_device_id atmel_serial_dt_ids[] = {
+ { .compatible = "atmel,at91rm9200-usart" },
+ { .compatible = "atmel,at91sam9260-usart" },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, atmel_serial_dt_ids);
+#endif
+
static inline struct atmel_uart_port *
to_atmel_uart_port(struct uart_port *uart)
{
@@ -339,7 +352,8 @@ static void atmel_stop_tx(struct uart_port *port)
/* Disable interrupts */
UART_PUT_IDR(port, atmel_port->tx_done_mask);
- if (atmel_port->rs485.flags & SER_RS485_ENABLED)
+ if ((atmel_port->rs485.flags & SER_RS485_ENABLED) &&
+ !(atmel_port->rs485.flags & SER_RS485_RX_DURING_TX))
atmel_start_rx(port);
}
@@ -356,7 +370,8 @@ static void atmel_start_tx(struct uart_port *port)
really need this.*/
return;
- if (atmel_port->rs485.flags & SER_RS485_ENABLED)
+ if ((atmel_port->rs485.flags & SER_RS485_ENABLED) &&
+ !(atmel_port->rs485.flags & SER_RS485_RX_DURING_TX))
atmel_stop_rx(port);
/* re-enable PDC transmit */
@@ -680,7 +695,8 @@ static void atmel_tx_dma(struct uart_port *port)
/* Enable interrupts */
UART_PUT_IER(port, atmel_port->tx_done_mask);
} else {
- if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
+ if ((atmel_port->rs485.flags & SER_RS485_ENABLED) &&
+ !(atmel_port->rs485.flags & SER_RS485_RX_DURING_TX)) {
/* DMA done, stop TX, start RX for RS485 */
atmel_start_rx(port);
}
@@ -1407,6 +1423,48 @@ static struct uart_ops atmel_pops = {
#endif
};
+static void __devinit atmel_of_init_port(struct atmel_uart_port *atmel_port,
+ struct device_node *np)
+{
+ u32 rs485_delay[2];
+
+ /* DMA/PDC usage specification */
+ if (of_get_property(np, "atmel,use-dma-rx", NULL))
+ atmel_port->use_dma_rx = 1;
+ else
+ atmel_port->use_dma_rx = 0;
+ if (of_get_property(np, "atmel,use-dma-tx", NULL))
+ atmel_port->use_dma_tx = 1;
+ else
+ atmel_port->use_dma_tx = 0;
+
+ /* rs485 properties */
+ if (of_property_read_u32_array(np, "rs485-rts-delay",
+ rs485_delay, 2) == 0) {
+ struct serial_rs485 *rs485conf = &atmel_port->rs485;
+
+ rs485conf->delay_rts_before_send = rs485_delay[0];
+ rs485conf->delay_rts_after_send = rs485_delay[1];
+ rs485conf->flags = 0;
+
+ if (rs485conf->delay_rts_before_send == 0 &&
+ rs485conf->delay_rts_after_send == 0) {
+ rs485conf->flags |= SER_RS485_RTS_ON_SEND;
+ } else {
+ if (rs485conf->delay_rts_before_send)
+ rs485conf->flags |= SER_RS485_RTS_BEFORE_SEND;
+ if (rs485conf->delay_rts_after_send)
+ rs485conf->flags |= SER_RS485_RTS_AFTER_SEND;
+ }
+
+ if (of_get_property(np, "rs485-rx-during-tx", NULL))
+ rs485conf->flags |= SER_RS485_RX_DURING_TX;
+
+ if (of_get_property(np, "linux,rs485-enabled-at-boot-time", NULL))
+ rs485conf->flags |= SER_RS485_ENABLED;
+ }
+}
+
/*
* Configure the port from the platform device resource info.
*/
@@ -1414,13 +1472,20 @@ static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port,
struct platform_device *pdev)
{
struct uart_port *port = &atmel_port->uart;
- struct atmel_uart_data *data = pdev->dev.platform_data;
+ struct atmel_uart_data *pdata = pdev->dev.platform_data;
+
+ if (pdev->dev.of_node) {
+ atmel_of_init_port(atmel_port, pdev->dev.of_node);
+ } else {
+ atmel_port->use_dma_rx = pdata->use_dma_rx;
+ atmel_port->use_dma_tx = pdata->use_dma_tx;
+ atmel_port->rs485 = pdata->rs485;
+ }
port->iotype = UPIO_MEM;
port->flags = UPF_BOOT_AUTOCONF;
port->ops = &atmel_pops;
port->fifosize = 1;
- port->line = data->num;
port->dev = &pdev->dev;
port->mapbase = pdev->resource[0].start;
port->irq = pdev->resource[1].start;
@@ -1430,10 +1495,10 @@ static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port,
memset(&atmel_port->rx_ring, 0, sizeof(atmel_port->rx_ring));
- if (data->regs)
+ if (pdata && pdata->regs) {
/* Already mapped by setup code */
- port->membase = data->regs;
- else {
+ port->membase = pdata->regs;
+ } else {
port->flags |= UPF_IOREMAP;
port->membase = NULL;
}
@@ -1447,9 +1512,6 @@ static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port,
/* only enable clock when USART is in use */
}
- atmel_port->use_dma_rx = data->use_dma_rx;
- atmel_port->use_dma_tx = data->use_dma_tx;
- atmel_port->rs485 = data->rs485;
/* Use TXEMPTY for interrupt when rs485 else TXRDY or ENDTX|TXBUFE */
if (atmel_port->rs485.flags & SER_RS485_ENABLED)
atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
@@ -1611,10 +1673,14 @@ static int __init atmel_console_init(void)
if (atmel_default_console_device) {
struct atmel_uart_data *pdata =
atmel_default_console_device->dev.platform_data;
+ int id = pdata->num;
+ struct atmel_uart_port *port = &atmel_ports[id];
+
+ port->backup_imr = 0;
+ port->uart.line = id;
- add_preferred_console(ATMEL_DEVICENAME, pdata->num, NULL);
- atmel_init_port(&atmel_ports[pdata->num],
- atmel_default_console_device);
+ add_preferred_console(ATMEL_DEVICENAME, id, NULL);
+ atmel_init_port(port, atmel_default_console_device);
register_console(&atmel_console);
}
@@ -1711,14 +1777,39 @@ static int atmel_serial_resume(struct platform_device *pdev)
static int __devinit atmel_serial_probe(struct platform_device *pdev)
{
struct atmel_uart_port *port;
+ struct device_node *np = pdev->dev.of_node;
struct atmel_uart_data *pdata = pdev->dev.platform_data;
void *data;
- int ret;
+ int ret = -ENODEV;
BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1));
- port = &atmel_ports[pdata->num];
+ if (np)
+ ret = of_alias_get_id(np, "serial");
+ else
+ if (pdata)
+ ret = pdata->num;
+
+ if (ret < 0)
+ /* port id not found in platform data nor device-tree aliases:
+ * auto-enumerate it */
+ ret = find_first_zero_bit(&atmel_ports_in_use,
+ sizeof(atmel_ports_in_use));
+
+ if (ret > ATMEL_MAX_UART) {
+ ret = -ENODEV;
+ goto err;
+ }
+
+ if (test_and_set_bit(ret, &atmel_ports_in_use)) {
+ /* port already in use */
+ ret = -EBUSY;
+ goto err;
+ }
+
+ port = &atmel_ports[ret];
port->backup_imr = 0;
+ port->uart.line = ret;
atmel_init_port(port, pdev);
@@ -1764,7 +1855,7 @@ err_alloc_ring:
clk_put(port->clk);
port->clk = NULL;
}
-
+err:
return ret;
}
@@ -1784,6 +1875,8 @@ static int __devexit atmel_serial_remove(struct platform_device *pdev)
/* "port" is allocated statically, so we shouldn't free it */
+ clear_bit(port->line, &atmel_ports_in_use);
+
clk_put(atmel_port->clk);
return ret;
@@ -1797,6 +1890,7 @@ static struct platform_driver atmel_serial_driver = {
.driver = {
.name = "atmel_usart",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(atmel_serial_dt_ids),
},
};
diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c
index 891d194ae754..ee101c0d358f 100644
--- a/drivers/tty/serial/bfin_sport_uart.c
+++ b/drivers/tty/serial/bfin_sport_uart.c
@@ -294,7 +294,7 @@ static int sport_startup(struct uart_port *port)
if (request_irq(gpio_to_irq(up->cts_pin),
sport_mctrl_cts_int,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
- IRQF_DISABLED, "BFIN_SPORT_UART_CTS", up)) {
+ 0, "BFIN_SPORT_UART_CTS", up)) {
up->cts_pin = -1;
dev_info(port->dev, "Unable to attach BlackFin UART over SPORT CTS interrupt. So, disable it.\n");
}
diff --git a/drivers/tty/serial/bfin_5xx.c b/drivers/tty/serial/bfin_uart.c
index ff6979181ac5..66afb98b77b5 100644
--- a/drivers/tty/serial/bfin_5xx.c
+++ b/drivers/tty/serial/bfin_uart.c
@@ -234,8 +234,8 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
status = UART_GET_LSR(uart);
UART_CLEAR_LSR(uart);
- ch = UART_GET_CHAR(uart);
- uart->port.icount.rx++;
+ ch = UART_GET_CHAR(uart);
+ uart->port.icount.rx++;
#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
@@ -667,17 +667,17 @@ static int bfin_serial_startup(struct uart_port *port)
kgdboc_break_enabled = 0;
else {
# endif
- if (request_irq(uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED,
+ if (request_irq(uart->rx_irq, bfin_serial_rx_int, 0,
"BFIN_UART_RX", uart)) {
printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n");
return -EBUSY;
}
if (request_irq
- (uart->port.irq+1, bfin_serial_tx_int, IRQF_DISABLED,
+ (uart->tx_irq, bfin_serial_tx_int, 0,
"BFIN_UART_TX", uart)) {
printk(KERN_NOTICE "Unable to attach BlackFin UART TX interrupt\n");
- free_irq(uart->port.irq, uart);
+ free_irq(uart->rx_irq, uart);
return -EBUSY;
}
@@ -692,7 +692,7 @@ static int bfin_serial_startup(struct uart_port *port)
*/
unsigned uart_dma_ch_rx, uart_dma_ch_tx;
- switch (uart->port.irq) {
+ switch (uart->rx_irq) {
case IRQ_UART3_RX:
uart_dma_ch_rx = CH_UART3_RX;
uart_dma_ch_tx = CH_UART3_TX;
@@ -709,16 +709,16 @@ static int bfin_serial_startup(struct uart_port *port)
if (uart_dma_ch_rx &&
request_dma(uart_dma_ch_rx, "BFIN_UART_RX") < 0) {
printk(KERN_NOTICE"Fail to attach UART interrupt\n");
- free_irq(uart->port.irq, uart);
- free_irq(uart->port.irq + 1, uart);
+ free_irq(uart->rx_irq, uart);
+ free_irq(uart->tx_irq, uart);
return -EBUSY;
}
if (uart_dma_ch_tx &&
request_dma(uart_dma_ch_tx, "BFIN_UART_TX") < 0) {
printk(KERN_NOTICE "Fail to attach UART interrupt\n");
free_dma(uart_dma_ch_rx);
- free_irq(uart->port.irq, uart);
- free_irq(uart->port.irq + 1, uart);
+ free_irq(uart->rx_irq, uart);
+ free_irq(uart->tx_irq, uart);
return -EBUSY;
}
}
@@ -734,19 +734,18 @@ static int bfin_serial_startup(struct uart_port *port)
if (request_irq(gpio_to_irq(uart->cts_pin),
bfin_serial_mctrl_cts_int,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
- IRQF_DISABLED, "BFIN_UART_CTS", uart)) {
+ 0, "BFIN_UART_CTS", uart)) {
uart->cts_pin = -1;
pr_info("Unable to attach BlackFin UART CTS interrupt. So, disable it.\n");
}
}
- if (uart->rts_pin >= 0) {
+ if (uart->rts_pin >= 0)
gpio_direction_output(uart->rts_pin, 0);
- }
#endif
#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
if (uart->cts_pin >= 0 && request_irq(uart->status_irq,
bfin_serial_mctrl_cts_int,
- IRQF_DISABLED, "BFIN_UART_MODEM_STATUS", uart)) {
+ 0, "BFIN_UART_MODEM_STATUS", uart)) {
uart->cts_pin = -1;
pr_info("Unable to attach BlackFin UART Modem Status interrupt.\n");
}
@@ -786,8 +785,8 @@ static void bfin_serial_shutdown(struct uart_port *port)
break;
};
#endif
- free_irq(uart->port.irq, uart);
- free_irq(uart->port.irq+1, uart);
+ free_irq(uart->rx_irq, uart);
+ free_irq(uart->tx_irq, uart);
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
@@ -1091,10 +1090,18 @@ bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud,
*parity = 'o';
}
switch (lcr & 0x03) {
- case 0: *bits = 5; break;
- case 1: *bits = 6; break;
- case 2: *bits = 7; break;
- case 3: *bits = 8; break;
+ case 0:
+ *bits = 5;
+ break;
+ case 1:
+ *bits = 6;
+ break;
+ case 2:
+ *bits = 7;
+ break;
+ case 3:
+ *bits = 8;
+ break;
}
/* Set DLAB in LCR to Access DLL and DLH */
UART_SET_DLAB(uart);
@@ -1183,7 +1190,7 @@ static struct console bfin_serial_console = {
.index = -1,
.data = &bfin_serial_reg,
};
-#define BFIN_SERIAL_CONSOLE &bfin_serial_console
+#define BFIN_SERIAL_CONSOLE (&bfin_serial_console)
#else
#define BFIN_SERIAL_CONSOLE NULL
#endif /* CONFIG_SERIAL_BFIN_CONSOLE */
@@ -1312,14 +1319,22 @@ static int bfin_serial_probe(struct platform_device *pdev)
}
uart->port.mapbase = res->start;
- uart->port.irq = platform_get_irq(pdev, 0);
- if (uart->port.irq < 0) {
- dev_err(&pdev->dev, "No uart RX/TX IRQ specified\n");
+ uart->tx_irq = platform_get_irq(pdev, 0);
+ if (uart->tx_irq < 0) {
+ dev_err(&pdev->dev, "No uart TX IRQ specified\n");
+ ret = -ENOENT;
+ goto out_error_unmap;
+ }
+
+ uart->rx_irq = platform_get_irq(pdev, 1);
+ if (uart->rx_irq < 0) {
+ dev_err(&pdev->dev, "No uart RX IRQ specified\n");
ret = -ENOENT;
goto out_error_unmap;
}
+ uart->port.irq = uart->rx_irq;
- uart->status_irq = platform_get_irq(pdev, 1);
+ uart->status_irq = platform_get_irq(pdev, 2);
if (uart->status_irq < 0) {
dev_err(&pdev->dev, "No uart status IRQ specified\n");
ret = -ENOENT;
diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
index 9488da74d4f7..b418947b7107 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
@@ -31,6 +31,7 @@
#include <linux/module.h>
#include <linux/tty.h>
+#include <linux/tty_flip.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/serial.h>
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index 58be715913cd..b7435043f2fe 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -258,7 +258,7 @@ static struct e100_serial rs_table[] = {
.dma_out_enabled = 1,
.dma_out_nbr = SER0_TX_DMA_NBR,
.dma_out_irq_nbr = SER0_DMA_TX_IRQ_NBR,
- .dma_out_irq_flags = IRQF_DISABLED,
+ .dma_out_irq_flags = 0,
.dma_out_irq_description = "serial 0 dma tr",
#else
.dma_out_enabled = 0,
@@ -271,7 +271,7 @@ static struct e100_serial rs_table[] = {
.dma_in_enabled = 1,
.dma_in_nbr = SER0_RX_DMA_NBR,
.dma_in_irq_nbr = SER0_DMA_RX_IRQ_NBR,
- .dma_in_irq_flags = IRQF_DISABLED,
+ .dma_in_irq_flags = 0,
.dma_in_irq_description = "serial 0 dma rec",
#else
.dma_in_enabled = 0,
@@ -313,7 +313,7 @@ static struct e100_serial rs_table[] = {
.dma_out_enabled = 1,
.dma_out_nbr = SER1_TX_DMA_NBR,
.dma_out_irq_nbr = SER1_DMA_TX_IRQ_NBR,
- .dma_out_irq_flags = IRQF_DISABLED,
+ .dma_out_irq_flags = 0,
.dma_out_irq_description = "serial 1 dma tr",
#else
.dma_out_enabled = 0,
@@ -326,7 +326,7 @@ static struct e100_serial rs_table[] = {
.dma_in_enabled = 1,
.dma_in_nbr = SER1_RX_DMA_NBR,
.dma_in_irq_nbr = SER1_DMA_RX_IRQ_NBR,
- .dma_in_irq_flags = IRQF_DISABLED,
+ .dma_in_irq_flags = 0,
.dma_in_irq_description = "serial 1 dma rec",
#else
.dma_in_enabled = 0,
@@ -369,7 +369,7 @@ static struct e100_serial rs_table[] = {
.dma_out_enabled = 1,
.dma_out_nbr = SER2_TX_DMA_NBR,
.dma_out_irq_nbr = SER2_DMA_TX_IRQ_NBR,
- .dma_out_irq_flags = IRQF_DISABLED,
+ .dma_out_irq_flags = 0,
.dma_out_irq_description = "serial 2 dma tr",
#else
.dma_out_enabled = 0,
@@ -382,7 +382,7 @@ static struct e100_serial rs_table[] = {
.dma_in_enabled = 1,
.dma_in_nbr = SER2_RX_DMA_NBR,
.dma_in_irq_nbr = SER2_DMA_RX_IRQ_NBR,
- .dma_in_irq_flags = IRQF_DISABLED,
+ .dma_in_irq_flags = 0,
.dma_in_irq_description = "serial 2 dma rec",
#else
.dma_in_enabled = 0,
@@ -423,7 +423,7 @@ static struct e100_serial rs_table[] = {
.dma_out_enabled = 1,
.dma_out_nbr = SER3_TX_DMA_NBR,
.dma_out_irq_nbr = SER3_DMA_TX_IRQ_NBR,
- .dma_out_irq_flags = IRQF_DISABLED,
+ .dma_out_irq_flags = 0,
.dma_out_irq_description = "serial 3 dma tr",
#else
.dma_out_enabled = 0,
@@ -436,7 +436,7 @@ static struct e100_serial rs_table[] = {
.dma_in_enabled = 1,
.dma_in_nbr = SER3_RX_DMA_NBR,
.dma_in_irq_nbr = SER3_DMA_RX_IRQ_NBR,
- .dma_in_irq_flags = IRQF_DISABLED,
+ .dma_in_irq_flags = 0,
.dma_in_irq_description = "serial 3 dma rec",
#else
.dma_in_enabled = 0,
@@ -1788,7 +1788,7 @@ static unsigned int handle_descr_data(struct e100_serial *info,
struct etrax_recv_buffer *buffer = phys_to_virt(descr->buf) - sizeof *buffer;
if (info->recv_cnt + recvl > 65536) {
- printk(KERN_CRIT
+ printk(KERN_WARNING
"%s: Too much pending incoming serial data! Dropping %u bytes.\n", __func__, recvl);
return 0;
}
@@ -3813,13 +3813,13 @@ rs_close(struct tty_struct *tty, struct file * filp)
* one, we've got real problems, since it means the
* serial port won't be shutdown.
*/
- printk(KERN_CRIT
+ printk(KERN_ERR
"rs_close: bad serial port count; tty->count is 1, "
"info->count is %d\n", info->count);
info->count = 1;
}
if (--info->count < 0) {
- printk(KERN_CRIT "rs_close: bad serial port count for ttyS%d: %d\n",
+ printk(KERN_ERR "rs_close: bad serial port count for ttyS%d: %d\n",
info->line, info->count);
info->count = 0;
}
@@ -4452,7 +4452,7 @@ static int __init rs_init(void)
#if defined(CONFIG_ETRAX_RS485_ON_PA)
if (cris_io_interface_allocate_pins(if_serial_0, 'a', rs485_pa_bit,
rs485_pa_bit)) {
- printk(KERN_CRIT "ETRAX100LX serial: Could not allocate "
+ printk(KERN_ERR "ETRAX100LX serial: Could not allocate "
"RS485 pin\n");
put_tty_driver(driver);
return -EBUSY;
@@ -4461,7 +4461,7 @@ static int __init rs_init(void)
#if defined(CONFIG_ETRAX_RS485_ON_PORT_G)
if (cris_io_interface_allocate_pins(if_serial_0, 'g', rs485_pa_bit,
rs485_port_g_bit)) {
- printk(KERN_CRIT "ETRAX100LX serial: Could not allocate "
+ printk(KERN_ERR "ETRAX100LX serial: Could not allocate "
"RS485 pin\n");
put_tty_driver(driver);
return -EBUSY;
@@ -4494,7 +4494,7 @@ static int __init rs_init(void)
if (info->enabled) {
if (cris_request_io_interface(info->io_if,
info->io_if_description)) {
- printk(KERN_CRIT "ETRAX100LX async serial: "
+ printk(KERN_ERR "ETRAX100LX async serial: "
"Could not allocate IO pins for "
"%s, port %d\n",
info->io_if_description, i);
@@ -4558,7 +4558,7 @@ static int __init rs_init(void)
/* hook the irq's for DMA channel 6 and 7, serial output and input, and some more... */
if (request_irq(SERIAL_IRQ_NBR, ser_interrupt,
- IRQF_SHARED | IRQF_DISABLED, "serial ", driver))
+ IRQF_SHARED, "serial ", driver))
panic("%s: Failed to request irq8", __func__);
#endif
diff --git a/drivers/tty/serial/dz.c b/drivers/tty/serial/dz.c
index ddc487a2d42f..e3699a84049f 100644
--- a/drivers/tty/serial/dz.c
+++ b/drivers/tty/serial/dz.c
@@ -47,6 +47,7 @@
#include <linux/serial_core.h>
#include <linux/sysrq.h>
#include <linux/tty.h>
+#include <linux/tty_flip.h>
#include <linux/atomic.h>
#include <asm/bootinfo.h>
diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c
index 8a869e58f6d7..d55709a7a75a 100644
--- a/drivers/tty/serial/icom.c
+++ b/drivers/tty/serial/icom.c
@@ -1554,7 +1554,7 @@ static int __devinit icom_probe(struct pci_dev *dev,
/* save off irq and request irq line */
if ( (retval = request_irq(dev->irq, icom_interrupt,
- IRQF_DISABLED | IRQF_SHARED, ICOM_DRIVER_NAME,
+ IRQF_SHARED, ICOM_DRIVER_NAME,
(void *) icom_adapter))) {
goto probe_exit2;
}
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 7e91b3d368cd..54ffdc6243f9 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -508,8 +508,10 @@ static irqreturn_t imx_rxint(int irq, void *dev_id)
if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx))
continue;
- if (rx & (URXD_PRERR | URXD_OVRRUN | URXD_FRMERR) ) {
- if (rx & URXD_PRERR)
+ if (unlikely(rx & URXD_ERR)) {
+ if (rx & URXD_BRK)
+ sport->port.icount.brk++;
+ else if (rx & URXD_PRERR)
sport->port.icount.parity++;
else if (rx & URXD_FRMERR)
sport->port.icount.frame++;
@@ -524,7 +526,9 @@ static irqreturn_t imx_rxint(int irq, void *dev_id)
rx &= sport->port.read_status_mask;
- if (rx & URXD_PRERR)
+ if (rx & URXD_BRK)
+ flg = TTY_BREAK;
+ else if (rx & URXD_PRERR)
flg = TTY_PARITY;
else if (rx & URXD_FRMERR)
flg = TTY_FRAME;
diff --git a/drivers/tty/serial/ioc3_serial.c b/drivers/tty/serial/ioc3_serial.c
index ee43efc7bdcc..758ff310f7f8 100644
--- a/drivers/tty/serial/ioc3_serial.c
+++ b/drivers/tty/serial/ioc3_serial.c
@@ -13,6 +13,7 @@
*/
#include <linux/errno.h>
#include <linux/tty.h>
+#include <linux/tty_flip.h>
#include <linux/serial.h>
#include <linux/circ_buf.h>
#include <linux/serial_reg.h>
diff --git a/drivers/tty/serial/ioc4_serial.c b/drivers/tty/serial/ioc4_serial.c
index fcfe82653ac8..6b36c1554d7e 100644
--- a/drivers/tty/serial/ioc4_serial.c
+++ b/drivers/tty/serial/ioc4_serial.c
@@ -14,6 +14,7 @@
*/
#include <linux/errno.h>
#include <linux/tty.h>
+#include <linux/tty_flip.h>
#include <linux/serial.h>
#include <linux/serialP.h>
#include <linux/circ_buf.h>
diff --git a/drivers/tty/serial/jsm/jsm.h b/drivers/tty/serial/jsm/jsm.h
index b704c8ce0d71..529bec6edaf8 100644
--- a/drivers/tty/serial/jsm/jsm.h
+++ b/drivers/tty/serial/jsm/jsm.h
@@ -88,7 +88,6 @@ enum {
/* 4 extra for alignment play space */
#define WRITEBUFLEN ((4096) + 4)
-#define MYFLIPLEN N_TTY_BUF_SIZE
#define JSM_VERSION "jsm: 1.2-1-INKERNEL"
#define JSM_PARTNUM "40002438_A-INKERNEL"
@@ -150,7 +149,6 @@ struct jsm_board
u32 bd_uart_offset; /* Space between each UART */
struct jsm_channel *channels[MAXPORTS]; /* array of pointers to our channels. */
- char *flipbuf; /* Our flip buffer, alloced if board is found */
u32 bd_dividend; /* Board/UARTs specific dividend */
@@ -177,16 +175,13 @@ struct jsm_board
#define CH_TX_FIFO_LWM 0x0800 /* TX Fifo is below Low Water */
#define CH_BREAK_SENDING 0x1000 /* Break is being sent */
#define CH_LOOPBACK 0x2000 /* Channel is in lookback mode */
-#define CH_FLIPBUF_IN_USE 0x4000 /* Channel's flipbuf is in use */
#define CH_BAUD0 0x08000 /* Used for checking B0 transitions */
/* Our Read/Error/Write queue sizes */
#define RQUEUEMASK 0x1FFF /* 8 K - 1 */
#define EQUEUEMASK 0x1FFF /* 8 K - 1 */
-#define WQUEUEMASK 0x0FFF /* 4 K - 1 */
#define RQUEUESIZE (RQUEUEMASK + 1)
#define EQUEUESIZE RQUEUESIZE
-#define WQUEUESIZE (WQUEUEMASK + 1)
/************************************************************************
@@ -226,10 +221,6 @@ struct jsm_channel {
u16 ch_e_head; /* Head location of the error queue */
u16 ch_e_tail; /* Tail location of the error queue */
- u8 *ch_wqueue; /* Our write queue buffer - malloc'ed */
- u16 ch_w_head; /* Head location of the write queue */
- u16 ch_w_tail; /* Tail location of the write queue */
-
u64 ch_rxcount; /* total of data received so far */
u64 ch_txcount; /* total of data transmitted so far */
@@ -378,7 +369,6 @@ extern int jsm_debug;
* Prototypes for non-static functions used in more than one module
*
*************************************************************************/
-int jsm_tty_write(struct uart_port *port);
int jsm_tty_init(struct jsm_board *);
int jsm_uart_port_init(struct jsm_board *);
int jsm_remove_uart_port(struct jsm_board *);
diff --git a/drivers/tty/serial/jsm/jsm_driver.c b/drivers/tty/serial/jsm/jsm_driver.c
index 96da17868cf3..648b6a3efa32 100644
--- a/drivers/tty/serial/jsm/jsm_driver.c
+++ b/drivers/tty/serial/jsm/jsm_driver.c
@@ -160,27 +160,10 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device
dev_info(&pdev->dev, "board %d: Digi Neo (rev %d), irq %d\n",
adapter_count, brd->rev, brd->irq);
- /*
- * allocate flip buffer for board.
- *
- * Okay to malloc with GFP_KERNEL, we are not at interrupt
- * context, and there are no locks held.
- */
- brd->flipbuf = kzalloc(MYFLIPLEN, GFP_KERNEL);
- if (!brd->flipbuf) {
- /* XXX: leaking all resources from jsm_tty_init and
- jsm_uart_port_init here! */
- dev_err(&pdev->dev, "memory allocation for flipbuf failed\n");
- rc = -ENOMEM;
- goto out_free_uart;
- }
-
pci_set_drvdata(pdev, brd);
pci_save_state(pdev);
return 0;
- out_free_uart:
- jsm_remove_uart_port(brd);
out_free_irq:
jsm_remove_uart_port(brd);
free_irq(brd->irq, brd);
@@ -211,14 +194,12 @@ static void __devexit jsm_remove_one(struct pci_dev *pdev)
if (brd->channels[i]) {
kfree(brd->channels[i]->ch_rqueue);
kfree(brd->channels[i]->ch_equeue);
- kfree(brd->channels[i]->ch_wqueue);
kfree(brd->channels[i]);
}
}
pci_release_regions(pdev);
pci_disable_device(pdev);
- kfree(brd->flipbuf);
kfree(brd);
}
diff --git a/drivers/tty/serial/jsm/jsm_neo.c b/drivers/tty/serial/jsm/jsm_neo.c
index 4538c3e3646e..81dfafa11b0b 100644
--- a/drivers/tty/serial/jsm/jsm_neo.c
+++ b/drivers/tty/serial/jsm/jsm_neo.c
@@ -496,12 +496,15 @@ static void neo_copy_data_from_queue_to_uart(struct jsm_channel *ch)
int s;
int qlen;
u32 len_written = 0;
+ struct circ_buf *circ;
if (!ch)
return;
+ circ = &ch->uart_port.state->xmit;
+
/* No data to write to the UART */
- if (ch->ch_w_tail == ch->ch_w_head)
+ if (uart_circ_empty(circ))
return;
/* If port is "stopped", don't send any data to the UART */
@@ -517,11 +520,10 @@ static void neo_copy_data_from_queue_to_uart(struct jsm_channel *ch)
if (ch->ch_cached_lsr & UART_LSR_THRE) {
ch->ch_cached_lsr &= ~(UART_LSR_THRE);
- writeb(ch->ch_wqueue[ch->ch_w_tail], &ch->ch_neo_uart->txrx);
+ writeb(circ->buf[circ->tail], &ch->ch_neo_uart->txrx);
jsm_printk(WRITE, INFO, &ch->ch_bd->pci_dev,
- "Tx data: %x\n", ch->ch_wqueue[ch->ch_w_head]);
- ch->ch_w_tail++;
- ch->ch_w_tail &= WQUEUEMASK;
+ "Tx data: %x\n", circ->buf[circ->tail]);
+ circ->tail = (circ->tail + 1) & (UART_XMIT_SIZE - 1);
ch->ch_txcount++;
}
return;
@@ -536,36 +538,36 @@ static void neo_copy_data_from_queue_to_uart(struct jsm_channel *ch)
n = UART_17158_TX_FIFOSIZE - ch->ch_t_tlevel;
/* cache head and tail of queue */
- head = ch->ch_w_head & WQUEUEMASK;
- tail = ch->ch_w_tail & WQUEUEMASK;
- qlen = (head - tail) & WQUEUEMASK;
+ head = circ->head & (UART_XMIT_SIZE - 1);
+ tail = circ->tail & (UART_XMIT_SIZE - 1);
+ qlen = uart_circ_chars_pending(circ);
/* Find minimum of the FIFO space, versus queue length */
n = min(n, qlen);
while (n > 0) {
- s = ((head >= tail) ? head : WQUEUESIZE) - tail;
+ s = ((head >= tail) ? head : UART_XMIT_SIZE) - tail;
s = min(s, n);
if (s <= 0)
break;
- memcpy_toio(&ch->ch_neo_uart->txrxburst, ch->ch_wqueue + tail, s);
+ memcpy_toio(&ch->ch_neo_uart->txrxburst, circ->buf + tail, s);
/* Add and flip queue if needed */
- tail = (tail + s) & WQUEUEMASK;
+ tail = (tail + s) & (UART_XMIT_SIZE - 1);
n -= s;
ch->ch_txcount += s;
len_written += s;
}
/* Update the final tail */
- ch->ch_w_tail = tail & WQUEUEMASK;
+ circ->tail = tail & (UART_XMIT_SIZE - 1);
if (len_written >= ch->ch_t_tlevel)
ch->ch_flags &= ~(CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
- if (!jsm_tty_write(&ch->uart_port))
+ if (uart_circ_empty(circ))
uart_write_wakeup(&ch->uart_port);
}
@@ -946,7 +948,6 @@ static void neo_param(struct jsm_channel *ch)
if ((ch->ch_c_cflag & (CBAUD)) == 0) {
ch->ch_r_head = ch->ch_r_tail = 0;
ch->ch_e_head = ch->ch_e_tail = 0;
- ch->ch_w_head = ch->ch_w_tail = 0;
neo_flush_uart_write(ch);
neo_flush_uart_read(ch);
diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c
index 7a4a914ecff0..434bd881fcae 100644
--- a/drivers/tty/serial/jsm/jsm_tty.c
+++ b/drivers/tty/serial/jsm/jsm_tty.c
@@ -118,6 +118,19 @@ static void jsm_tty_set_mctrl(struct uart_port *port, unsigned int mctrl)
udelay(10);
}
+/*
+ * jsm_tty_write()
+ *
+ * Take data from the user or kernel and send it out to the FEP.
+ * In here exists all the Transparent Print magic as well.
+ */
+static void jsm_tty_write(struct uart_port *port)
+{
+ struct jsm_channel *channel;
+ channel = container_of(port, struct jsm_channel, uart_port);
+ channel->ch_bd->bd_ops->copy_data_from_queue_to_uart(channel);
+}
+
static void jsm_tty_start_tx(struct uart_port *port)
{
struct jsm_channel *channel = (struct jsm_channel *)port;
@@ -216,14 +229,6 @@ static int jsm_tty_open(struct uart_port *port)
return -ENOMEM;
}
}
- if (!channel->ch_wqueue) {
- channel->ch_wqueue = kzalloc(WQUEUESIZE, GFP_KERNEL);
- if (!channel->ch_wqueue) {
- jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev,
- "unable to allocate write queue buf");
- return -ENOMEM;
- }
- }
channel->ch_flags &= ~(CH_OPENING);
/*
@@ -237,7 +242,6 @@ static int jsm_tty_open(struct uart_port *port)
*/
channel->ch_r_head = channel->ch_r_tail = 0;
channel->ch_e_head = channel->ch_e_tail = 0;
- channel->ch_w_head = channel->ch_w_tail = 0;
brd->bd_ops->flush_uart_write(channel);
brd->bd_ops->flush_uart_read(channel);
@@ -836,75 +840,3 @@ void jsm_check_queue_flow_control(struct jsm_channel *ch)
}
}
}
-
-/*
- * jsm_tty_write()
- *
- * Take data from the user or kernel and send it out to the FEP.
- * In here exists all the Transparent Print magic as well.
- */
-int jsm_tty_write(struct uart_port *port)
-{
- int bufcount;
- int data_count = 0,data_count1 =0;
- u16 head;
- u16 tail;
- u16 tmask;
- u32 remain;
- int temp_tail = port->state->xmit.tail;
- struct jsm_channel *channel = (struct jsm_channel *)port;
-
- tmask = WQUEUEMASK;
- head = (channel->ch_w_head) & tmask;
- tail = (channel->ch_w_tail) & tmask;
-
- if ((bufcount = tail - head - 1) < 0)
- bufcount += WQUEUESIZE;
-
- bufcount = min(bufcount, 56);
- remain = WQUEUESIZE - head;
-
- data_count = 0;
- if (bufcount >= remain) {
- bufcount -= remain;
- while ((port->state->xmit.head != temp_tail) &&
- (data_count < remain)) {
- channel->ch_wqueue[head++] =
- port->state->xmit.buf[temp_tail];
-
- temp_tail++;
- temp_tail &= (UART_XMIT_SIZE - 1);
- data_count++;
- }
- if (data_count == remain) head = 0;
- }
-
- data_count1 = 0;
- if (bufcount > 0) {
- remain = bufcount;
- while ((port->state->xmit.head != temp_tail) &&
- (data_count1 < remain)) {
- channel->ch_wqueue[head++] =
- port->state->xmit.buf[temp_tail];
-
- temp_tail++;
- temp_tail &= (UART_XMIT_SIZE - 1);
- data_count1++;
-
- }
- }
-
- port->state->xmit.tail = temp_tail;
-
- data_count += data_count1;
- if (data_count) {
- head &= tmask;
- channel->ch_w_head = head;
- }
-
- if (data_count) {
- channel->ch_bd->bd_ops->copy_data_from_queue_to_uart(channel);
- }
-
- return data_count;
-}
diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
index bc95f52cad8b..96c1cacc7360 100644
--- a/drivers/tty/serial/lantiq.c
+++ b/drivers/tty/serial/lantiq.c
@@ -338,21 +338,21 @@ lqasc_startup(struct uart_port *port)
ASCCON_ROEN, port->membase + LTQ_ASC_CON);
retval = request_irq(ltq_port->tx_irq, lqasc_tx_int,
- IRQF_DISABLED, "asc_tx", port);
+ 0, "asc_tx", port);
if (retval) {
pr_err("failed to request lqasc_tx_int\n");
return retval;
}
retval = request_irq(ltq_port->rx_irq, lqasc_rx_int,
- IRQF_DISABLED, "asc_rx", port);
+ 0, "asc_rx", port);
if (retval) {
pr_err("failed to request lqasc_rx_int\n");
goto err1;
}
retval = request_irq(ltq_port->err_irq, lqasc_err_int,
- IRQF_DISABLED, "asc_err", port);
+ 0, "asc_err", port);
if (retval) {
pr_err("failed to request lqasc_err_int\n");
goto err2;
diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/m32r_sio.c
index 8e07517f8acd..08018934e013 100644
--- a/drivers/tty/serial/m32r_sio.c
+++ b/drivers/tty/serial/m32r_sio.c
@@ -32,6 +32,7 @@
#include <linux/module.h>
#include <linux/tty.h>
+#include <linux/tty_flip.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/console.h>
diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c
index 7b951adac54b..2af5aa5f3a80 100644
--- a/drivers/tty/serial/max3100.c
+++ b/drivers/tty/serial/max3100.c
@@ -47,6 +47,8 @@
#include <linux/serial.h>
#include <linux/spi/spi.h>
#include <linux/freezer.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
#include <linux/serial_max3100.h>
diff --git a/drivers/tty/serial/max3107.c b/drivers/tty/serial/max3107.c
index a8164601c0ea..db00b595cab0 100644
--- a/drivers/tty/serial/max3107.c
+++ b/drivers/tty/serial/max3107.c
@@ -31,6 +31,8 @@
#include <linux/device.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/freezer.h>
diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c
index 3394b7cc1722..9afca093d6ec 100644
--- a/drivers/tty/serial/mcf.c
+++ b/drivers/tty/serial/mcf.c
@@ -380,7 +380,7 @@ static void mcf_config_port(struct uart_port *port, int flags)
/* Clear mask, so no surprise interrupts. */
writeb(0, port->membase + MCFUART_UIMR);
- if (request_irq(port->irq, mcf_interrupt, IRQF_DISABLED, "UART", port))
+ if (request_irq(port->irq, mcf_interrupt, 0, "UART", port))
printk(KERN_ERR "MCF: unable to attach ColdFire UART %d "
"interrupt vector=%d\n", port->line, port->irq);
}
diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c
index cab52f4a88b0..286c386d9c46 100644
--- a/drivers/tty/serial/mfd.c
+++ b/drivers/tty/serial/mfd.c
@@ -38,6 +38,7 @@
#include <linux/pci.h>
#include <linux/io.h>
#include <linux/debugfs.h>
+#include <linux/pm_runtime.h>
#define HSU_DMA_BUF_SIZE 2048
@@ -764,6 +765,8 @@ static int serial_hsu_startup(struct uart_port *port)
container_of(port, struct uart_hsu_port, port);
unsigned long flags;
+ pm_runtime_get_sync(up->dev);
+
/*
* Clear the FIFO buffers and disable them.
* (they will be reenabled in set_termios())
@@ -871,6 +874,8 @@ static void serial_hsu_shutdown(struct uart_port *port)
UART_FCR_CLEAR_RCVR |
UART_FCR_CLEAR_XMIT);
serial_out(up, UART_FCR, 0);
+
+ pm_runtime_put(up->dev);
}
static void
@@ -1249,6 +1254,39 @@ static int serial_hsu_resume(struct pci_dev *pdev)
#define serial_hsu_resume NULL
#endif
+#ifdef CONFIG_PM_RUNTIME
+static int serial_hsu_runtime_idle(struct device *dev)
+{
+ int err;
+
+ err = pm_schedule_suspend(dev, 500);
+ if (err)
+ return -EBUSY;
+
+ return 0;
+}
+
+static int serial_hsu_runtime_suspend(struct device *dev)
+{
+ return 0;
+}
+
+static int serial_hsu_runtime_resume(struct device *dev)
+{
+ return 0;
+}
+#else
+#define serial_hsu_runtime_idle NULL
+#define serial_hsu_runtime_suspend NULL
+#define serial_hsu_runtime_resume NULL
+#endif
+
+static const struct dev_pm_ops serial_hsu_pm_ops = {
+ .runtime_suspend = serial_hsu_runtime_suspend,
+ .runtime_resume = serial_hsu_runtime_resume,
+ .runtime_idle = serial_hsu_runtime_idle,
+};
+
/* temp global pointer before we settle down on using one or four PCI dev */
static struct hsu_port *phsu;
@@ -1315,6 +1353,9 @@ static int serial_hsu_probe(struct pci_dev *pdev,
pci_set_drvdata(pdev, uport);
}
+ pm_runtime_put_noidle(&pdev->dev);
+ pm_runtime_allow(&pdev->dev);
+
return 0;
err_disable:
@@ -1411,6 +1452,9 @@ static void serial_hsu_remove(struct pci_dev *pdev)
if (!priv)
return;
+ pm_runtime_forbid(&pdev->dev);
+ pm_runtime_get_noresume(&pdev->dev);
+
/* For port 0/1/2, priv is the address of uart_hsu_port */
if (pdev->device != 0x081E) {
up = priv;
@@ -1423,7 +1467,7 @@ static void serial_hsu_remove(struct pci_dev *pdev)
}
/* First 3 are UART ports, and the 4th is the DMA */
-static const struct pci_device_id pci_ids[] __devinitdata = {
+static const struct pci_device_id pci_ids[] __devinitconst = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081B) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081C) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081D) },
@@ -1438,6 +1482,9 @@ static struct pci_driver hsu_pci_driver = {
.remove = __devexit_p(serial_hsu_remove),
.suspend = serial_hsu_suspend,
.resume = serial_hsu_resume,
+ .driver = {
+ .pm = &serial_hsu_pm_ops,
+ },
};
static int __init hsu_pci_init(void)
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index a0bcd8a3758d..1093a88a1fe3 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -34,6 +34,7 @@
#include <linux/device.h>
#include <linux/module.h>
#include <linux/tty.h>
+#include <linux/tty_flip.h>
#include <linux/serial.h>
#include <linux/sysrq.h>
#include <linux/console.h>
@@ -273,7 +274,7 @@ static unsigned int mpc5200b_psc_set_baudrate(struct uart_port *port,
static void mpc52xx_psc_get_irq(struct uart_port *port, struct device_node *np)
{
- port->irqflags = IRQF_DISABLED;
+ port->irqflags = 0;
port->irq = irq_of_parse_and_map(np, 0);
}
diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
index 492c14d63e99..4c309e869903 100644
--- a/drivers/tty/serial/mrst_max3110.c
+++ b/drivers/tty/serial/mrst_max3110.c
@@ -27,6 +27,10 @@
* interrupt for a low speed UART device
*/
+#ifdef CONFIG_MAGIC_SYSRQ
+#define SUPPORT_SYSRQ
+#endif
+
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/irq.h>
@@ -73,9 +77,9 @@ struct uart_max3110 {
/* global data structure, may need be removed */
static struct uart_max3110 *pmax;
-static void receive_chars(struct uart_max3110 *max,
- unsigned char *str, int len);
-static int max3110_read_multi(struct uart_max3110 *max, u8 *buf);
+static int receive_chars(struct uart_max3110 *max,
+ unsigned short *str, int len);
+static int max3110_read_multi(struct uart_max3110 *max);
static void max3110_con_receive(struct uart_max3110 *max);
static int max3110_write_then_read(struct uart_max3110 *max,
@@ -108,7 +112,6 @@ static int max3110_out(struct uart_max3110 *max, const u16 out)
{
void *buf;
u16 *obuf, *ibuf;
- u8 ch;
int ret;
buf = kzalloc(8, GFP_KERNEL | GFP_DMA);
@@ -125,11 +128,7 @@ static int max3110_out(struct uart_max3110 *max, const u16 out)
goto exit;
}
- /* If some valid data is read back */
- if (*ibuf & MAX3110_READ_DATA_AVAILABLE) {
- ch = *ibuf & 0xff;
- receive_chars(max, &ch, 1);
- }
+ receive_chars(max, ibuf, 1);
exit:
kfree(buf);
@@ -142,12 +141,11 @@ exit:
*
* Return how many valide bytes are read back
*/
-static int max3110_read_multi(struct uart_max3110 *max, u8 *rxbuf)
+static int max3110_read_multi(struct uart_max3110 *max)
{
void *buf;
u16 *obuf, *ibuf;
- u8 *pbuf, valid_str[M3110_RX_FIFO_DEPTH];
- int i, j, blen;
+ int ret, blen;
blen = M3110_RX_FIFO_DEPTH * sizeof(u16);
buf = kzalloc(blen * 2, GFP_KERNEL | GFP_DMA);
@@ -165,19 +163,10 @@ static int max3110_read_multi(struct uart_max3110 *max, u8 *rxbuf)
return 0;
}
- /* If caller doesn't provide a buffer, then handle received char */
- pbuf = rxbuf ? rxbuf : valid_str;
-
- for (i = 0, j = 0; i < M3110_RX_FIFO_DEPTH; i++) {
- if (ibuf[i] & MAX3110_READ_DATA_AVAILABLE)
- pbuf[j++] = ibuf[i] & 0xff;
- }
-
- if (j && (pbuf == valid_str))
- receive_chars(max, valid_str, j);
+ ret = receive_chars(max, ibuf, M3110_RX_FIFO_DEPTH);
kfree(buf);
- return j;
+ return ret;
}
static void serial_m3110_con_putchar(struct uart_port *port, int ch)
@@ -207,7 +196,7 @@ static void serial_m3110_con_write(struct console *co,
uart_console_write(&pmax->port, s, count, serial_m3110_con_putchar);
if (!test_and_set_bit(CON_TX_NEEDED, &pmax->uart_flags))
- wake_up_process(pmax->main_thread);
+ wake_up(&pmax->wq);
}
static int __init
@@ -276,8 +265,7 @@ static void send_circ_buf(struct uart_max3110 *max,
{
void *buf;
u16 *obuf, *ibuf;
- u8 valid_str[WORDS_PER_XFER];
- int i, j, len, blen, dma_size, left, ret = 0;
+ int i, len, blen, dma_size, left, ret = 0;
dma_size = WORDS_PER_XFER * sizeof(u16) * 2;
@@ -301,18 +289,13 @@ static void send_circ_buf(struct uart_max3110 *max,
}
/* Fail to send msg to console is not very critical */
+
ret = max3110_write_then_read(max, obuf, ibuf, blen, 0);
if (ret)
pr_warning(PR_FMT "%s(): get err msg %d\n",
__func__, ret);
- for (i = 0, j = 0; i < len; i++) {
- if (ibuf[i] & MAX3110_READ_DATA_AVAILABLE)
- valid_str[j++] = ibuf[i] & 0xff;
- }
-
- if (j)
- receive_chars(max, valid_str, j);
+ receive_chars(max, ibuf, len);
max->port.icount.tx += len;
left -= len;
@@ -349,33 +332,54 @@ static void serial_m3110_start_tx(struct uart_port *port)
container_of(port, struct uart_max3110, port);
if (!test_and_set_bit(UART_TX_NEEDED, &max->uart_flags))
- wake_up_process(max->main_thread);
+ wake_up(&max->wq);
}
-static void receive_chars(struct uart_max3110 *max, unsigned char *str, int len)
+static int
+receive_chars(struct uart_max3110 *max, unsigned short *str, int len)
{
struct uart_port *port = &max->port;
struct tty_struct *tty;
- int usable;
+ char buf[M3110_RX_FIFO_DEPTH];
+ int r, w, usable;
/* If uart is not opened, just return */
if (!port->state)
- return;
+ return 0;
- tty = port->state->port.tty;
+ tty = tty_port_tty_get(&port->state->port);
if (!tty)
- return;
+ return 0;
+
+ for (r = 0, w = 0; r < len; r++) {
+ if (str[r] & MAX3110_BREAK &&
+ uart_handle_break(port))
+ continue;
+
+ if (str[r] & MAX3110_READ_DATA_AVAILABLE) {
+ if (uart_handle_sysrq_char(port, str[r] & 0xff))
+ continue;
+
+ buf[w++] = str[r] & 0xff;
+ }
+ }
+
+ if (!w) {
+ tty_kref_put(tty);
+ return 0;
+ }
- while (len) {
- usable = tty_buffer_request_room(tty, len);
+ for (r = 0; w; r += usable, w -= usable) {
+ usable = tty_buffer_request_room(tty, w);
if (usable) {
- tty_insert_flip_string(tty, str, usable);
- str += usable;
+ tty_insert_flip_string(tty, buf + r, usable);
port->icount.rx += usable;
}
- len -= usable;
}
tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
+
+ return r;
}
/*
@@ -390,28 +394,15 @@ static void receive_chars(struct uart_max3110 *max, unsigned char *str, int len)
*/
static void max3110_con_receive(struct uart_max3110 *max)
{
- int loop = 1, num, total = 0;
- u8 recv_buf[512], *pbuf;
+ int loop = 1, num;
- pbuf = recv_buf;
do {
- num = max3110_read_multi(max, pbuf);
+ num = max3110_read_multi(max);
if (num) {
loop = 5;
- pbuf += num;
- total += num;
-
- if (total >= 504) {
- receive_chars(max, recv_buf, total);
- pbuf = recv_buf;
- total = 0;
- }
}
} while (--loop);
-
- if (total)
- receive_chars(max, recv_buf, total);
}
static int max3110_main_thread(void *_max)
@@ -424,7 +415,8 @@ static int max3110_main_thread(void *_max)
pr_info(PR_FMT "start main thread\n");
do {
- wait_event_interruptible(*wq, max->uart_flags || kthread_should_stop());
+ wait_event_interruptible(*wq,
+ max->uart_flags || kthread_should_stop());
mutex_lock(&max->thread_mutex);
@@ -452,8 +444,9 @@ static irqreturn_t serial_m3110_irq(int irq, void *dev_id)
/* max3110's irq is a falling edge, not level triggered,
* so no need to disable the irq */
+
if (!test_and_set_bit(BIT_IRQ_PENDING, &max->uart_flags))
- wake_up_process(max->main_thread);
+ wake_up(&max->wq);
return IRQ_HANDLED;
}
diff --git a/drivers/tty/serial/mrst_max3110.h b/drivers/tty/serial/mrst_max3110.h
index c37ea48c825a..35af0739513b 100644
--- a/drivers/tty/serial/mrst_max3110.h
+++ b/drivers/tty/serial/mrst_max3110.h
@@ -7,6 +7,7 @@
/* status bits for all 4 MAX3110 operate modes */
#define MAX3110_READ_DATA_AVAILABLE (1 << 15)
#define MAX3110_WRITE_BUF_EMPTY (1 << 14)
+#define MAX3110_BREAK (1 << 10)
#define WC_TAG (3 << 14)
#define RC_TAG (1 << 14)
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index e6ba83876508..29cbfd8c4e7c 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -804,8 +804,6 @@ static int __init msm_console_setup(struct console *co, char *options)
if (unlikely(!port->membase))
return -ENXIO;
- port->cons = co;
-
msm_init_clock(port);
if (options)
diff --git a/drivers/tty/serial/msm_serial_hs.c b/drivers/tty/serial/msm_serial_hs.c
index 624701f8138a..60c6eb850265 100644
--- a/drivers/tty/serial/msm_serial_hs.c
+++ b/drivers/tty/serial/msm_serial_hs.c
@@ -30,6 +30,8 @@
#include <linux/serial.h>
#include <linux/serial_core.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/interrupt.h>
diff --git a/drivers/tty/serial/mux.c b/drivers/tty/serial/mux.c
index 9711e06a8374..06f6aefd5ba6 100644
--- a/drivers/tty/serial/mux.c
+++ b/drivers/tty/serial/mux.c
@@ -21,6 +21,8 @@
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
#include <linux/console.h>
#include <linux/delay.h> /* for udelay */
#include <linux/device.h>
diff --git a/drivers/tty/serial/nwpserial.c b/drivers/tty/serial/nwpserial.c
index de173671e3d0..9beaff1cec24 100644
--- a/drivers/tty/serial/nwpserial.c
+++ b/drivers/tty/serial/nwpserial.c
@@ -15,6 +15,7 @@
#include <linux/serial_reg.h>
#include <linux/serial_core.h>
#include <linux/tty.h>
+#include <linux/tty_flip.h>
#include <linux/irqreturn.h>
#include <linux/mutex.h>
#include <linux/of_platform.h>
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index b46218d679e2..21febef926aa 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -20,6 +20,8 @@
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/serial_core.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/dmi.h>
diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index 531931c1b250..5c8e3bba6c84 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -100,6 +100,16 @@ static inline void receive_chars(struct uart_pxa_port *up, int *status)
int max_count = 256;
do {
+ /* work around Errata #20 according to
+ * Intel(R) PXA27x Processor Family
+ * Specification Update (May 2005)
+ *
+ * Step 2
+ * Disable the Reciever Time Out Interrupt via IER[RTOEI]
+ */
+ up->ier &= ~UART_IER_RTOIE;
+ serial_out(up, UART_IER, up->ier);
+
ch = serial_in(up, UART_RX);
flag = TTY_NORMAL;
up->port.icount.rx++;
@@ -156,6 +166,16 @@ static inline void receive_chars(struct uart_pxa_port *up, int *status)
*status = serial_in(up, UART_LSR);
} while ((*status & UART_LSR_DR) && (max_count-- > 0));
tty_flip_buffer_push(tty);
+
+ /* work around Errata #20 according to
+ * Intel(R) PXA27x Processor Family
+ * Specification Update (May 2005)
+ *
+ * Step 6:
+ * No more data in FIFO: Re-enable RTO interrupt via IER[RTOIE]
+ */
+ up->ier |= UART_IER_RTOIE;
+ serial_out(up, UART_IER, up->ier);
}
static void transmit_chars(struct uart_pxa_port *up)
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 6edafb5ace18..b31f1c3a2c4c 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -83,6 +83,16 @@ static int s3c24xx_serial_txempty_nofifo(struct uart_port *port)
return (rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE);
}
+/*
+ * s3c64xx and later SoC's include the interrupt mask and status registers in
+ * the controller itself, unlike the s3c24xx SoC's which have these registers
+ * in the interrupt controller. Check if the port type is s3c64xx or higher.
+ */
+static int s3c24xx_serial_has_interrupt_mask(struct uart_port *port)
+{
+ return to_ourport(port)->info->type == PORT_S3C6400;
+}
+
static void s3c24xx_serial_rx_enable(struct uart_port *port)
{
unsigned long flags;
@@ -126,7 +136,11 @@ static void s3c24xx_serial_stop_tx(struct uart_port *port)
struct s3c24xx_uart_port *ourport = to_ourport(port);
if (tx_enabled(port)) {
- disable_irq_nosync(ourport->tx_irq);
+ if (s3c24xx_serial_has_interrupt_mask(port))
+ __set_bit(S3C64XX_UINTM_TXD,
+ portaddrl(port, S3C64XX_UINTM));
+ else
+ disable_irq_nosync(ourport->tx_irq);
tx_enabled(port) = 0;
if (port->flags & UPF_CONS_FLOW)
s3c24xx_serial_rx_enable(port);
@@ -141,19 +155,26 @@ static void s3c24xx_serial_start_tx(struct uart_port *port)
if (port->flags & UPF_CONS_FLOW)
s3c24xx_serial_rx_disable(port);
- enable_irq(ourport->tx_irq);
+ if (s3c24xx_serial_has_interrupt_mask(port))
+ __clear_bit(S3C64XX_UINTM_TXD,
+ portaddrl(port, S3C64XX_UINTM));
+ else
+ enable_irq(ourport->tx_irq);
tx_enabled(port) = 1;
}
}
-
static void s3c24xx_serial_stop_rx(struct uart_port *port)
{
struct s3c24xx_uart_port *ourport = to_ourport(port);
if (rx_enabled(port)) {
dbg("s3c24xx_serial_stop_rx: port=%p\n", port);
- disable_irq_nosync(ourport->rx_irq);
+ if (s3c24xx_serial_has_interrupt_mask(port))
+ __set_bit(S3C64XX_UINTM_RXD,
+ portaddrl(port, S3C64XX_UINTM));
+ else
+ disable_irq_nosync(ourport->rx_irq);
rx_enabled(port) = 0;
}
}
@@ -320,6 +341,28 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
return IRQ_HANDLED;
}
+/* interrupt handler for s3c64xx and later SoC's.*/
+static irqreturn_t s3c64xx_serial_handle_irq(int irq, void *id)
+{
+ struct s3c24xx_uart_port *ourport = id;
+ struct uart_port *port = &ourport->port;
+ unsigned int pend = rd_regl(port, S3C64XX_UINTP);
+ unsigned long flags;
+ irqreturn_t ret = IRQ_HANDLED;
+
+ spin_lock_irqsave(&port->lock, flags);
+ if (pend & S3C64XX_UINTM_RXD_MSK) {
+ ret = s3c24xx_serial_rx_chars(irq, id);
+ wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_RXD_MSK);
+ }
+ if (pend & S3C64XX_UINTM_TXD_MSK) {
+ ret = s3c24xx_serial_tx_chars(irq, id);
+ wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_TXD_MSK);
+ }
+ spin_unlock_irqrestore(&port->lock, flags);
+ return ret;
+}
+
static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port)
{
struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
@@ -377,18 +420,25 @@ static void s3c24xx_serial_shutdown(struct uart_port *port)
struct s3c24xx_uart_port *ourport = to_ourport(port);
if (ourport->tx_claimed) {
- free_irq(ourport->tx_irq, ourport);
+ if (!s3c24xx_serial_has_interrupt_mask(port))
+ free_irq(ourport->tx_irq, ourport);
tx_enabled(port) = 0;
ourport->tx_claimed = 0;
}
if (ourport->rx_claimed) {
- free_irq(ourport->rx_irq, ourport);
+ if (!s3c24xx_serial_has_interrupt_mask(port))
+ free_irq(ourport->rx_irq, ourport);
ourport->rx_claimed = 0;
rx_enabled(port) = 0;
}
-}
+ /* Clear pending interrupts and mask all interrupts */
+ if (s3c24xx_serial_has_interrupt_mask(port)) {
+ wr_regl(port, S3C64XX_UINTP, 0xf);
+ wr_regl(port, S3C64XX_UINTM, 0xf);
+ }
+}
static int s3c24xx_serial_startup(struct uart_port *port)
{
@@ -436,6 +486,33 @@ static int s3c24xx_serial_startup(struct uart_port *port)
return ret;
}
+static int s3c64xx_serial_startup(struct uart_port *port)
+{
+ struct s3c24xx_uart_port *ourport = to_ourport(port);
+ int ret;
+
+ dbg("s3c64xx_serial_startup: port=%p (%08lx,%p)\n",
+ port->mapbase, port->membase);
+
+ ret = request_irq(port->irq, s3c64xx_serial_handle_irq, IRQF_SHARED,
+ s3c24xx_serial_portname(port), ourport);
+ if (ret) {
+ printk(KERN_ERR "cannot get irq %d\n", port->irq);
+ return ret;
+ }
+
+ /* For compatibility with s3c24xx Soc's */
+ rx_enabled(port) = 1;
+ ourport->rx_claimed = 1;
+ tx_enabled(port) = 0;
+ ourport->tx_claimed = 1;
+
+ /* Enable Rx Interrupt */
+ __clear_bit(S3C64XX_UINTM_RXD, portaddrl(port, S3C64XX_UINTM));
+ dbg("s3c64xx_serial_startup ok\n");
+ return ret;
+}
+
/* power power management control */
static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
@@ -879,7 +956,6 @@ static struct uart_ops s3c24xx_serial_ops = {
.verify_port = s3c24xx_serial_verify_port,
};
-
static struct uart_driver s3c24xx_uart_drv = {
.owner = THIS_MODULE,
.driver_name = "s3c2410_serial",
@@ -895,7 +971,6 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS
.port = {
.lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[0].port.lock),
.iotype = UPIO_MEM,
- .irq = IRQ_S3CUART_RX0,
.uartclk = 0,
.fifosize = 16,
.ops = &s3c24xx_serial_ops,
@@ -907,7 +982,6 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS
.port = {
.lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[1].port.lock),
.iotype = UPIO_MEM,
- .irq = IRQ_S3CUART_RX1,
.uartclk = 0,
.fifosize = 16,
.ops = &s3c24xx_serial_ops,
@@ -921,7 +995,6 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS
.port = {
.lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[2].port.lock),
.iotype = UPIO_MEM,
- .irq = IRQ_S3CUART_RX2,
.uartclk = 0,
.fifosize = 16,
.ops = &s3c24xx_serial_ops,
@@ -935,7 +1008,6 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS
.port = {
.lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[3].port.lock),
.iotype = UPIO_MEM,
- .irq = IRQ_S3CUART_RX3,
.uartclk = 0,
.fifosize = 16,
.ops = &s3c24xx_serial_ops,
@@ -1077,6 +1149,10 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
port->dev = &platdev->dev;
ourport->info = info;
+ /* Startup sequence is different for s3c64xx and higher SoC's */
+ if (s3c24xx_serial_has_interrupt_mask(port))
+ s3c24xx_serial_ops.startup = s3c64xx_serial_startup;
+
/* copy the info in from provided structure */
ourport->port.fifosize = info->fifosize;
@@ -1116,6 +1192,13 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
ourport->clk = clk_get(&platdev->dev, "uart");
+ /* Keep all interrupts masked and cleared */
+ if (s3c24xx_serial_has_interrupt_mask(port)) {
+ wr_regl(port, S3C64XX_UINTM, 0xf);
+ wr_regl(port, S3C64XX_UINTP, 0xf);
+ wr_regl(port, S3C64XX_UINTSP, 0xf);
+ }
+
dbg("port: map=%08x, mem=%08x, irq=%d (%d,%d), clock=%ld\n",
port->mapbase, port->membase, port->irq,
ourport->rx_irq, ourport->tx_irq, port->uartclk);
diff --git a/drivers/tty/serial/samsung.h b/drivers/tty/serial/samsung.h
index a69d9a54be94..8e87b788e5c6 100644
--- a/drivers/tty/serial/samsung.h
+++ b/drivers/tty/serial/samsung.h
@@ -61,6 +61,7 @@ struct s3c24xx_uart_port {
/* register access controls */
#define portaddr(port, reg) ((port)->membase + (reg))
+#define portaddrl(port, reg) ((unsigned long *)((port)->membase + (reg)))
#define rd_regb(port, reg) (__raw_readb(portaddr(port, reg)))
#define rd_regl(port, reg) (__raw_readl(portaddr(port, reg)))
diff --git a/drivers/tty/serial/sb1250-duart.c b/drivers/tty/serial/sb1250-duart.c
index 6bc2e3f876f4..0be8a2f00d0b 100644
--- a/drivers/tty/serial/sb1250-duart.c
+++ b/drivers/tty/serial/sb1250-duart.c
@@ -37,6 +37,7 @@
#include <linux/spinlock.h>
#include <linux/sysrq.h>
#include <linux/tty.h>
+#include <linux/tty_flip.h>
#include <linux/types.h>
#include <linux/atomic.h>
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index a3efbea5dbba..0406d7ff505e 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -57,7 +57,7 @@ static struct lock_class_key port_lock_key;
static void uart_change_speed(struct tty_struct *tty, struct uart_state *state,
struct ktermios *old_termios);
-static void __uart_wait_until_sent(struct uart_port *port, int timeout);
+static void uart_wait_until_sent(struct tty_struct *tty, int timeout);
static void uart_change_pm(struct uart_state *state, int pm_state);
/*
@@ -72,7 +72,7 @@ void uart_write_wakeup(struct uart_port *port)
* closed. No cookie for you.
*/
BUG_ON(!state);
- tasklet_schedule(&state->tlet);
+ tty_wakeup(state->port.tty);
}
static void uart_stop(struct tty_struct *tty)
@@ -107,12 +107,6 @@ static void uart_start(struct tty_struct *tty)
spin_unlock_irqrestore(&port->lock, flags);
}
-static void uart_tasklet_action(unsigned long data)
-{
- struct uart_state *state = (struct uart_state *)data;
- tty_wakeup(state->port.tty);
-}
-
static inline void
uart_update_mctrl(struct uart_port *port, unsigned int set, unsigned int clear)
{
@@ -255,9 +249,11 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state)
}
/*
- * kill off our tasklet
+ * It's possible for shutdown to be called after suspend if we get
+ * a DCD drop (hangup) at just the right time. Clear suspended bit so
+ * we don't try to resume a port that has been shutdown.
*/
- tasklet_kill(&state->tlet);
+ clear_bit(ASYNCB_SUSPENDED, &port->flags);
/*
* Free the transmit buffer page.
@@ -1261,8 +1257,6 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
struct uart_port *uport;
unsigned long flags;
- BUG_ON(!tty_locked());
-
if (!state)
return;
@@ -1271,12 +1265,11 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
pr_debug("uart_close(%d) called\n", uport->line);
- mutex_lock(&port->mutex);
spin_lock_irqsave(&port->lock, flags);
if (tty_hung_up_p(filp)) {
spin_unlock_irqrestore(&port->lock, flags);
- goto done;
+ return;
}
if ((tty->count == 1) && (port->count != 1)) {
@@ -1298,7 +1291,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
}
if (port->count) {
spin_unlock_irqrestore(&port->lock, flags);
- goto done;
+ return;
}
/*
@@ -1306,19 +1299,13 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
* the line discipline to only process XON/XOFF characters by
* setting tty->closing.
*/
+ set_bit(ASYNCB_CLOSING, &port->flags);
tty->closing = 1;
spin_unlock_irqrestore(&port->lock, flags);
- if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE) {
- /*
- * hack: open-coded tty_wait_until_sent to avoid
- * recursive tty_lock
- */
- long timeout = msecs_to_jiffies(port->closing_wait);
- if (wait_event_interruptible_timeout(tty->write_wait,
- !tty_chars_in_buffer(tty), timeout) >= 0)
- __uart_wait_until_sent(uport, timeout);
- }
+ if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
+ tty_wait_until_sent_from_close(tty,
+ msecs_to_jiffies(port->closing_wait));
/*
* At this point, we stop accepting input. To do this, we
@@ -1334,9 +1321,10 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
* has completely drained; this is especially
* important if there is a transmit FIFO!
*/
- __uart_wait_until_sent(uport, uport->timeout);
+ uart_wait_until_sent(tty, uport->timeout);
}
+ mutex_lock(&port->mutex);
uart_shutdown(tty, state);
uart_flush_buffer(tty);
@@ -1361,15 +1349,18 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
* Wake up anyone trying to open this port.
*/
clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
+ clear_bit(ASYNCB_CLOSING, &port->flags);
spin_unlock_irqrestore(&port->lock, flags);
wake_up_interruptible(&port->open_wait);
+ wake_up_interruptible(&port->close_wait);
-done:
mutex_unlock(&port->mutex);
}
-static void __uart_wait_until_sent(struct uart_port *port, int timeout)
+static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
{
+ struct uart_state *state = tty->driver_data;
+ struct uart_port *port = state->uart_port;
unsigned long char_time, expire;
if (port->type == PORT_UNKNOWN || port->fifosize == 0)
@@ -1421,16 +1412,6 @@ static void __uart_wait_until_sent(struct uart_port *port, int timeout)
}
}
-static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
-{
- struct uart_state *state = tty->driver_data;
- struct uart_port *port = state->uart_port;
-
- tty_lock();
- __uart_wait_until_sent(port, timeout);
- tty_unlock();
-}
-
/*
* This is called with the BKL held in
* linux/drivers/char/tty_io.c:do_tty_hangup()
@@ -1443,7 +1424,6 @@ static void uart_hangup(struct tty_struct *tty)
struct tty_port *port = &state->port;
unsigned long flags;
- BUG_ON(!tty_locked());
pr_debug("uart_hangup(%d)\n", state->uart_port->line);
mutex_lock(&port->mutex);
@@ -1530,7 +1510,6 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
struct tty_port *port;
int retval, line = tty->index;
- BUG_ON(!tty_locked());
pr_debug("uart_open(%d) called\n", line);
/*
@@ -2008,6 +1987,8 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
if (port->tty && port->tty->termios && termios.c_cflag == 0)
termios = *(port->tty->termios);
+ if (console_suspend_enabled)
+ uart_change_pm(state, 0);
uport->ops->set_termios(uport, &termios, NULL);
if (console_suspend_enabled)
console_start(uport->cons);
@@ -2068,8 +2049,6 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port)
case UPIO_MEM32:
case UPIO_AU:
case UPIO_TSI:
- case UPIO_DWAPB:
- case UPIO_DWAPB32:
snprintf(address, sizeof(address),
"MMIO 0x%llx", (unsigned long long)port->mapbase);
break;
@@ -2298,8 +2277,6 @@ int uart_register_driver(struct uart_driver *drv)
port->ops = &uart_port_ops;
port->close_delay = 500; /* .5 seconds */
port->closing_wait = 30000; /* 30 seconds */
- tasklet_init(&state->tlet, uart_tasklet_action,
- (unsigned long)state);
}
retval = tty_register_driver(normal);
@@ -2460,11 +2437,6 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport)
*/
uport->type = PORT_UNKNOWN;
- /*
- * Kill the tasklet, and free resources.
- */
- tasklet_kill(&state->tlet);
-
state->uart_port = NULL;
mutex_unlock(&port_mutex);
@@ -2489,8 +2461,6 @@ int uart_match_port(struct uart_port *port1, struct uart_port *port2)
case UPIO_MEM32:
case UPIO_AU:
case UPIO_TSI:
- case UPIO_DWAPB:
- case UPIO_DWAPB32:
return (port1->mapbase == port2->mapbase);
}
return 0;
diff --git a/drivers/tty/serial/serial_ks8695.c b/drivers/tty/serial/serial_ks8695.c
index 2430319f2f52..7c13639c597e 100644
--- a/drivers/tty/serial/serial_ks8695.c
+++ b/drivers/tty/serial/serial_ks8695.c
@@ -13,6 +13,7 @@
*/
#include <linux/module.h>
#include <linux/tty.h>
+#include <linux/tty_flip.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/serial.h>
@@ -336,19 +337,19 @@ static int ks8695uart_startup(struct uart_port *port)
/*
* Allocate the IRQ
*/
- retval = request_irq(KS8695_IRQ_UART_TX, ks8695uart_tx_chars, IRQF_DISABLED, "UART TX", port);
+ retval = request_irq(KS8695_IRQ_UART_TX, ks8695uart_tx_chars, 0, "UART TX", port);
if (retval)
goto err_tx;
- retval = request_irq(KS8695_IRQ_UART_RX, ks8695uart_rx_chars, IRQF_DISABLED, "UART RX", port);
+ retval = request_irq(KS8695_IRQ_UART_RX, ks8695uart_rx_chars, 0, "UART RX", port);
if (retval)
goto err_rx;
- retval = request_irq(KS8695_IRQ_UART_LINE_STATUS, ks8695uart_rx_chars, IRQF_DISABLED, "UART LineStatus", port);
+ retval = request_irq(KS8695_IRQ_UART_LINE_STATUS, ks8695uart_rx_chars, 0, "UART LineStatus", port);
if (retval)
goto err_ls;
- retval = request_irq(KS8695_IRQ_UART_MODEM_STATUS, ks8695uart_modem_status, IRQF_DISABLED, "UART ModemStatus", port);
+ retval = request_irq(KS8695_IRQ_UART_MODEM_STATUS, ks8695uart_modem_status, 0, "UART ModemStatus", port);
if (retval)
goto err_ms;
diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c
index 8e3fc1944e6d..34bd345da775 100644
--- a/drivers/tty/serial/serial_txx9.c
+++ b/drivers/tty/serial/serial_txx9.c
@@ -28,6 +28,8 @@
#include <linux/pci.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
#include <asm/io.h>
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 5ea6ec3442e6..9871c57b348e 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1976,7 +1976,7 @@ static int __devinit sci_init_single(struct platform_device *dev,
* For the muxed case there's nothing more to do.
*/
port->irq = p->irqs[SCIx_RXI_IRQ];
- port->irqflags = IRQF_DISABLED;
+ port->irqflags = 0;
port->serial_in = sci_serial_in;
port->serial_out = sci_serial_out;
diff --git a/drivers/tty/serial/sn_console.c b/drivers/tty/serial/sn_console.c
index 377ae74e7154..238c7df73ef5 100644
--- a/drivers/tty/serial/sn_console.c
+++ b/drivers/tty/serial/sn_console.c
@@ -39,6 +39,7 @@
#include <linux/interrupt.h>
#include <linux/tty.h>
+#include <linux/tty_flip.h>
#include <linux/serial.h>
#include <linux/console.h>
#include <linux/module.h>
@@ -737,7 +738,7 @@ static void __init sn_sal_switch_to_interrupts(struct sn_cons_port *port)
DPRINTF("sn_console: switching to interrupt driven console\n");
if (request_irq(SGI_UART_VECTOR, sn_sal_interrupt,
- IRQF_DISABLED | IRQF_SHARED,
+ IRQF_SHARED,
"SAL console driver", port) >= 0) {
spin_lock_irqsave(&port->sc_port.lock, flags);
port->sc_port.irq = SGI_UART_VECTOR;
diff --git a/drivers/tty/serial/timbuart.c b/drivers/tty/serial/timbuart.c
index 1f36b7eb7351..a4b63bfeaa2f 100644
--- a/drivers/tty/serial/timbuart.c
+++ b/drivers/tty/serial/timbuart.c
@@ -23,6 +23,8 @@
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/serial_core.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/ioport.h>
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index 8af1ed83a4c0..b908615ccaaf 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -15,6 +15,7 @@
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <linux/tty.h>
+#include <linux/tty_flip.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/init.h>
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index 9af9f0879a24..cea8918b8233 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -20,8 +20,10 @@
#include <linux/module.h>
#include <linux/serial.h>
-#include <linux/slab.h>
#include <linux/serial_core.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
#include <linux/io.h>
#include <linux/of_platform.h>
#include <linux/dma-mapping.h>
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 19cc1e8149dd..8c03b127fd03 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -12,9 +12,11 @@
*/
#include <linux/platform_device.h>
+#include <linux/serial.h>
#include <linux/serial_core.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
#include <linux/console.h>
-#include <linux/serial.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/of.h>
diff --git a/drivers/tty/serial/zs.c b/drivers/tty/serial/zs.c
index 0aebd7121b56..b7455b526080 100644
--- a/drivers/tty/serial/zs.c
+++ b/drivers/tty/serial/zs.c
@@ -63,6 +63,7 @@
#include <linux/spinlock.h>
#include <linux/sysrq.h>
#include <linux/tty.h>
+#include <linux/tty_flip.h>
#include <linux/types.h>
#include <linux/atomic.h>
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index 272e417a9b0d..e67fb20490d2 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -2124,7 +2124,6 @@ static int mgsl_write(struct tty_struct * tty,
if ( info->params.mode == MGSL_MODE_HDLC ||
info->params.mode == MGSL_MODE_RAW ) {
/* operating in synchronous (frame oriented) mode */
- /* operating in synchronous (frame oriented) mode */
if (info->tx_active) {
if ( info->params.mode == MGSL_MODE_HDLC ) {
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index c77831c7675a..0f6b796c95c5 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -4950,7 +4950,7 @@ CheckAgain:
if ( debug_level >= DEBUG_LEVEL_DATA )
trace_block(info,info->rx_buf_list_ex[StartIndex].virt_addr,
- min_t(int, framesize,SCABUFSIZE),0);
+ min_t(unsigned int, framesize, SCABUFSIZE), 0);
if (framesize) {
if (framesize > info->max_frame_size)
@@ -5015,14 +5015,14 @@ static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int co
SCADESC_EX *desc_ex;
if ( debug_level >= DEBUG_LEVEL_DATA )
- trace_block(info,buf, min_t(int, count,SCABUFSIZE), 1);
+ trace_block(info, buf, min_t(unsigned int, count, SCABUFSIZE), 1);
/* Copy source buffer to one or more DMA buffers, starting with
* the first transmit dma buffer.
*/
for(i=0;;)
{
- copy_count = min_t(unsigned short,count,SCABUFSIZE);
+ copy_count = min_t(unsigned int, count, SCABUFSIZE);
desc = &info->tx_buf_list[i];
desc_ex = &info->tx_buf_list_ex[i];
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 4f1fc81112e6..05085beb83db 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -194,8 +194,7 @@ static inline struct tty_struct *file_tty(struct file *file)
return ((struct tty_file_private *)file->private_data)->tty;
}
-/* Associate a new file with the tty structure */
-int tty_add_file(struct tty_struct *tty, struct file *file)
+int tty_alloc_file(struct file *file)
{
struct tty_file_private *priv;
@@ -203,15 +202,36 @@ int tty_add_file(struct tty_struct *tty, struct file *file)
if (!priv)
return -ENOMEM;
+ file->private_data = priv;
+
+ return 0;
+}
+
+/* Associate a new file with the tty structure */
+void tty_add_file(struct tty_struct *tty, struct file *file)
+{
+ struct tty_file_private *priv = file->private_data;
+
priv->tty = tty;
priv->file = file;
- file->private_data = priv;
spin_lock(&tty_files_lock);
list_add(&priv->list, &tty->tty_files);
spin_unlock(&tty_files_lock);
+}
- return 0;
+/**
+ * tty_free_file - free file->private_data
+ *
+ * This shall be used only for fail path handling when tty_add_file was not
+ * called yet.
+ */
+void tty_free_file(struct file *file)
+{
+ struct tty_file_private *priv = file->private_data;
+
+ file->private_data = NULL;
+ kfree(priv);
}
/* Delete file from its tty */
@@ -222,8 +242,7 @@ void tty_del_file(struct file *file)
spin_lock(&tty_files_lock);
list_del(&priv->list);
spin_unlock(&tty_files_lock);
- file->private_data = NULL;
- kfree(priv);
+ tty_free_file(file);
}
@@ -1811,6 +1830,10 @@ static int tty_open(struct inode *inode, struct file *filp)
nonseekable_open(inode, filp);
retry_open:
+ retval = tty_alloc_file(filp);
+ if (retval)
+ return -ENOMEM;
+
noctty = filp->f_flags & O_NOCTTY;
index = -1;
retval = 0;
@@ -1823,6 +1846,7 @@ retry_open:
if (!tty) {
tty_unlock();
mutex_unlock(&tty_mutex);
+ tty_free_file(filp);
return -ENXIO;
}
driver = tty_driver_kref_get(tty->driver);
@@ -1855,6 +1879,7 @@ retry_open:
}
tty_unlock();
mutex_unlock(&tty_mutex);
+ tty_free_file(filp);
return -ENODEV;
}
@@ -1862,6 +1887,7 @@ retry_open:
if (!driver) {
tty_unlock();
mutex_unlock(&tty_mutex);
+ tty_free_file(filp);
return -ENODEV;
}
got_driver:
@@ -1872,6 +1898,8 @@ got_driver:
if (IS_ERR(tty)) {
tty_unlock();
mutex_unlock(&tty_mutex);
+ tty_driver_kref_put(driver);
+ tty_free_file(filp);
return PTR_ERR(tty);
}
}
@@ -1887,15 +1915,11 @@ got_driver:
tty_driver_kref_put(driver);
if (IS_ERR(tty)) {
tty_unlock();
+ tty_free_file(filp);
return PTR_ERR(tty);
}
- retval = tty_add_file(tty, filp);
- if (retval) {
- tty_unlock();
- tty_release(inode, filp);
- return retval;
- }
+ tty_add_file(tty, filp);
check_tty_count(tty, "tty_open");
if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
@@ -2716,6 +2740,8 @@ static long tty_compat_ioctl(struct file *file, unsigned int cmd,
ld = tty_ldisc_ref_wait(tty);
if (ld->ops->compat_ioctl)
retval = ld->ops->compat_ioctl(tty, file, cmd, arg);
+ else
+ retval = n_tty_compat_ioctl_helper(tty, file, cmd, arg);
tty_ldisc_deref(ld);
return retval;
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index 53f2442c6099..9314d93c1a20 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -19,6 +19,7 @@
#include <linux/module.h>
#include <linux/bitops.h>
#include <linux/mutex.h>
+#include <linux/compat.h>
#include <asm/io.h>
#include <asm/uaccess.h>
@@ -1179,3 +1180,19 @@ int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file,
}
}
EXPORT_SYMBOL(n_tty_ioctl_helper);
+
+#ifdef CONFIG_COMPAT
+long n_tty_compat_ioctl_helper(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ switch (cmd) {
+ case TIOCGLCKTRMIOS:
+ case TIOCSLCKTRMIOS:
+ return tty_mode_ioctl(tty, file, cmd, (unsigned long) compat_ptr(arg));
+ default:
+ return -ENOIOCTLCMD;
+ }
+}
+EXPORT_SYMBOL(n_tty_compat_ioctl_helper);
+#endif
+
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index ef925d581713..512c49f98e85 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -450,7 +450,6 @@ static int tty_ldisc_open(struct tty_struct *tty, struct tty_ldisc *ld)
if (ld->ops->open) {
int ret;
/* BTM here locks versus a hangup event */
- WARN_ON(!tty_locked());
ret = ld->ops->open(tty);
if (ret)
clear_bit(TTY_LDISC_OPEN, &tty->flags);
diff --git a/drivers/tty/tty_mutex.c b/drivers/tty/tty_mutex.c
index 3b2bb7719442..9ff986c32a21 100644
--- a/drivers/tty/tty_mutex.c
+++ b/drivers/tty/tty_mutex.c
@@ -15,30 +15,18 @@
* Don't use in new code.
*/
static DEFINE_MUTEX(big_tty_mutex);
-struct task_struct *__big_tty_mutex_owner;
-EXPORT_SYMBOL_GPL(__big_tty_mutex_owner);
/*
* Getting the big tty mutex.
*/
void __lockfunc tty_lock(void)
{
- struct task_struct *task = current;
-
- WARN_ON(__big_tty_mutex_owner == task);
-
mutex_lock(&big_tty_mutex);
- __big_tty_mutex_owner = task;
}
EXPORT_SYMBOL(tty_lock);
void __lockfunc tty_unlock(void)
{
- struct task_struct *task = current;
-
- WARN_ON(__big_tty_mutex_owner != task);
- __big_tty_mutex_owner = NULL;
-
mutex_unlock(&big_tty_mutex);
}
EXPORT_SYMBOL(tty_unlock);
diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c
index 33d37d230f8f..ef9dd628ba0b 100644
--- a/drivers/tty/tty_port.c
+++ b/drivers/tty/tty_port.c
@@ -350,7 +350,7 @@ int tty_port_close_start(struct tty_port *port,
tty_driver_flush_buffer(tty);
if (test_bit(ASYNCB_INITIALIZED, &port->flags) &&
port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
- tty_wait_until_sent(tty, port->closing_wait);
+ tty_wait_until_sent_from_close(tty, port->closing_wait);
if (port->drain_delay) {
unsigned int bps = tty_get_baud_rate(tty);
long timeout;
diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index 3761ccf0f340..a605549ee28f 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -33,7 +33,6 @@
#include <linux/string.h>
#include <linux/init.h>
#include <linux/slab.h>
-#include <linux/irq.h>
#include <linux/kbd_kern.h>
#include <linux/kbd_diacr.h>
@@ -43,6 +42,8 @@
#include <linux/notifier.h>
#include <linux/jiffies.h>
+#include <asm/irq_regs.h>
+
extern void ctrl_alt_del(void);
/*
diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c
index fb864e7fcd13..7a0a12ae5458 100644
--- a/drivers/tty/vt/selection.c
+++ b/drivers/tty/vt/selection.c
@@ -301,6 +301,8 @@ int set_selection(const struct tiocl_selection __user *sel, struct tty_struct *t
/* Insert the contents of the selection buffer into the
* queue of the tty associated with the current console.
* Invoked by ioctl().
+ *
+ * Locking: always called with BTM from vt_ioctl
*/
int paste_selection(struct tty_struct *tty)
{
@@ -310,8 +312,6 @@ int paste_selection(struct tty_struct *tty)
struct tty_ldisc *ld;
DECLARE_WAITQUEUE(wait, current);
- /* always called with BTM from vt_ioctl */
- WARN_ON(!tty_locked());
console_lock();
poke_blanked_console();
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index b3915b7ad3e2..e716839fab6e 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -259,7 +259,7 @@ EXPORT_SYMBOL_GPL(unregister_vt_notifier);
static void notify_write(struct vc_data *vc, unsigned int unicode)
{
- struct vt_notifier_param param = { .vc = vc, unicode = unicode };
+ struct vt_notifier_param param = { .vc = vc, .c = unicode };
atomic_notifier_call_chain(&vt_notifier_list, VT_WRITE, &param);
}
diff --git a/include/linux/serial.h b/include/linux/serial.h
index ef914061511e..97ff8e27a6cc 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -211,6 +211,7 @@ struct serial_rs485 {
#define SER_RS485_RTS_ON_SEND (1 << 1)
#define SER_RS485_RTS_AFTER_SEND (1 << 2)
#define SER_RS485_RTS_BEFORE_SEND (1 << 3)
+#define SER_RS485_RX_DURING_TX (1 << 4)
__u32 delay_rts_before_send; /* Milliseconds */
__u32 delay_rts_after_send; /* Milliseconds */
__u32 padding[5]; /* Memory is cheap, new structs
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index 97f5b45bbc07..1f05bbeac01e 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -35,6 +35,7 @@ struct plat_serial8250_port {
void (*set_termios)(struct uart_port *,
struct ktermios *new,
struct ktermios *old);
+ int (*handle_irq)(struct uart_port *);
void (*pm)(struct uart_port *, unsigned int state,
unsigned old);
};
@@ -80,6 +81,7 @@ extern void serial8250_do_set_termios(struct uart_port *port,
struct ktermios *termios, struct ktermios *old);
extern void serial8250_do_pm(struct uart_port *port, unsigned int state,
unsigned int oldstate);
+int serial8250_handle_irq(struct uart_port *port, unsigned int iir);
extern void serial8250_set_isa_configurator(void (*v)
(int port, struct uart_port *up,
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index a5c31146a337..eadf33d0abba 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -46,7 +46,8 @@
#define PORT_AR7 18 /* Texas Instruments AR7 internal UART */
#define PORT_U6_16550A 19 /* ST-Ericsson U6xxx internal UART */
#define PORT_TEGRA 20 /* NVIDIA Tegra internal UART */
-#define PORT_MAX_8250 20 /* max port ID */
+#define PORT_XR17D15X 21 /* Exar XR17D15x UART */
+#define PORT_MAX_8250 21 /* max port ID */
/*
* ARM specific type numbers. These are not currently guaranteed
@@ -300,6 +301,7 @@ struct uart_port {
void (*set_termios)(struct uart_port *,
struct ktermios *new,
struct ktermios *old);
+ int (*handle_irq)(struct uart_port *);
void (*pm)(struct uart_port *, unsigned int state,
unsigned int old);
unsigned int irq; /* irq number */
@@ -317,9 +319,7 @@ struct uart_port {
#define UPIO_MEM32 (3)
#define UPIO_AU (4) /* Au1x00 type IO */
#define UPIO_TSI (5) /* Tsi108/109 type IO */
-#define UPIO_DWAPB (6) /* DesignWare APB UART */
-#define UPIO_RM9000 (7) /* RM9000 type IO */
-#define UPIO_DWAPB32 (8) /* DesignWare APB UART (32 bit accesses) */
+#define UPIO_RM9000 (6) /* RM9000 type IO */
unsigned int read_status_mask; /* driver specific */
unsigned int ignore_status_mask; /* driver specific */
@@ -350,6 +350,7 @@ struct uart_port {
#define UPF_MAGIC_MULTIPLIER ((__force upf_t) (1 << 16))
#define UPF_CONS_FLOW ((__force upf_t) (1 << 23))
#define UPF_SHARE_IRQ ((__force upf_t) (1 << 24))
+#define UPF_EXAR_EFR ((__force upf_t) (1 << 25))
/* The exact UART type is known and should not be probed. */
#define UPF_FIXED_TYPE ((__force upf_t) (1 << 27))
#define UPF_BOOT_AUTOCONF ((__force upf_t) (1 << 28))
@@ -384,7 +385,6 @@ struct uart_state {
int pm_state;
struct circ_buf xmit;
- struct tasklet_struct tlet;
struct uart_port *uart_port;
};
diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h
index c75bda37c18e..8ce70d76f836 100644
--- a/include/linux/serial_reg.h
+++ b/include/linux/serial_reg.h
@@ -152,6 +152,7 @@
* LCR=0xBF (or DLAB=1 for 16C660)
*/
#define UART_EFR 2 /* I/O: Extended Features Register */
+#define UART_XR_EFR 9 /* I/O: Extended Features Register (XR17D15x) */
#define UART_EFR_CTS 0x80 /* CTS flow control */
#define UART_EFR_RTS 0x40 /* RTS flow control */
#define UART_EFR_SCD 0x20 /* Special character detect */
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 5f2ede82b3d6..5dbb3cb05a82 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -473,7 +473,9 @@ extern void proc_clear_tty(struct task_struct *p);
extern struct tty_struct *get_current_tty(void);
extern void tty_default_fops(struct file_operations *fops);
extern struct tty_struct *alloc_tty_struct(void);
-extern int tty_add_file(struct tty_struct *tty, struct file *file);
+extern int tty_alloc_file(struct file *file);
+extern void tty_add_file(struct tty_struct *tty, struct file *file);
+extern void tty_free_file(struct file *file);
extern void free_tty_struct(struct tty_struct *tty);
extern void initialize_tty_struct(struct tty_struct *tty,
struct tty_driver *driver, int idx);
@@ -581,6 +583,8 @@ extern int __init tty_init(void);
/* tty_ioctl.c */
extern int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg);
+extern long n_tty_compat_ioctl_helper(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg);
/* serial.c */
@@ -602,8 +606,24 @@ extern long vt_compat_ioctl(struct tty_struct *tty,
/* functions for preparation of BKL removal */
extern void __lockfunc tty_lock(void) __acquires(tty_lock);
extern void __lockfunc tty_unlock(void) __releases(tty_lock);
-extern struct task_struct *__big_tty_mutex_owner;
-#define tty_locked() (current == __big_tty_mutex_owner)
+
+/*
+ * this shall be called only from where BTM is held (like close)
+ *
+ * We need this to ensure nobody waits for us to finish while we are waiting.
+ * Without this we were encountering system stalls.
+ *
+ * This should be indeed removed with BTM removal later.
+ *
+ * Locking: BTM required. Nobody is allowed to hold port->mutex.
+ */
+static inline void tty_wait_until_sent_from_close(struct tty_struct *tty,
+ long timeout)
+{
+ tty_unlock(); /* tty->ops->close holds the BTM, drop it while waiting */
+ tty_wait_until_sent(tty, timeout);
+ tty_lock();
+}
/*
* wait_event_interruptible_tty -- wait for a condition with the tty lock held
diff --git a/net/irda/ircomm/ircomm_tty.c b/net/irda/ircomm/ircomm_tty.c
index b3cc8b3989a9..253695d43fd9 100644
--- a/net/irda/ircomm/ircomm_tty.c
+++ b/net/irda/ircomm/ircomm_tty.c
@@ -551,7 +551,7 @@ static void ircomm_tty_close(struct tty_struct *tty, struct file *filp)
*/
tty->closing = 1;
if (self->closing_wait != ASYNC_CLOSING_WAIT_NONE)
- tty_wait_until_sent(tty, self->closing_wait);
+ tty_wait_until_sent_from_close(tty, self->closing_wait);
ircomm_tty_shutdown(self);