summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/serial/8250_pci.c20
-rw-r--r--drivers/serial/mpc52xx_uart.c3
-rw-r--r--drivers/serial/serial_core.c6
-rw-r--r--include/linux/serial_core.h3
4 files changed, 17 insertions, 15 deletions
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 864ef859be56..a1d322f8a16c 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -134,7 +134,7 @@ afavlab_setup(struct serial_private *priv, struct pciserial_board *board,
* and Keystone have one Diva chip with 3 UARTs. Some later machines have
* one Diva chip, but it has been expanded to 5 UARTs.
*/
-static int __devinit pci_hp_diva_init(struct pci_dev *dev)
+static int pci_hp_diva_init(struct pci_dev *dev)
{
int rc = 0;
@@ -194,7 +194,7 @@ pci_hp_diva_setup(struct serial_private *priv, struct pciserial_board *board,
/*
* Added for EKF Intel i960 serial boards
*/
-static int __devinit pci_inteli960ni_init(struct pci_dev *dev)
+static int pci_inteli960ni_init(struct pci_dev *dev)
{
unsigned long oldval;
@@ -216,7 +216,7 @@ static int __devinit pci_inteli960ni_init(struct pci_dev *dev)
* seems to be mainly needed on card using the PLX which also use I/O
* mapped memory.
*/
-static int __devinit pci_plx9050_init(struct pci_dev *dev)
+static int pci_plx9050_init(struct pci_dev *dev)
{
u8 irq_config;
void __iomem *p;
@@ -314,7 +314,7 @@ sbs_setup(struct serial_private *priv, struct pciserial_board *board,
/* global control register offset for SBS PMC-OctalPro */
#define OCT_REG_CR_OFF 0x500
-static int __devinit sbs_init(struct pci_dev *dev)
+static int sbs_init(struct pci_dev *dev)
{
u8 __iomem *p;
@@ -493,7 +493,7 @@ static const struct timedia_struct {
{ 0, NULL }
};
-static int __devinit pci_timedia_init(struct pci_dev *dev)
+static int pci_timedia_init(struct pci_dev *dev)
{
unsigned short *ids;
int i, j;
@@ -566,13 +566,13 @@ titan_400l_800l_setup(struct serial_private *priv,
return setup_port(priv, port, bar, offset, board->reg_shift);
}
-static int __devinit pci_xircom_init(struct pci_dev *dev)
+static int pci_xircom_init(struct pci_dev *dev)
{
msleep(100);
return 0;
}
-static int __devinit pci_netmos_init(struct pci_dev *dev)
+static int pci_netmos_init(struct pci_dev *dev)
{
/* subdevice 0x00PS means <P> parallel, <S> serial */
unsigned int num_serial = dev->subsystem_device & 0xf;
@@ -622,7 +622,7 @@ pci_default_setup(struct serial_private *priv, struct pciserial_board *board,
*/
static struct pci_serial_quirk pci_serial_quirks[] = {
/*
- * AFAVLAB cards.
+ * AFAVLAB cards - these may be called via parport_serial
* It is not clear whether this applies to all products.
*/
{
@@ -754,7 +754,7 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
.exit = __devexit_p(sbs_exit),
},
/*
- * SIIG cards.
+ * SIIG cards - these may be called via parport_serial
*/
{
.vendor = PCI_VENDOR_ID_SIIG,
@@ -811,7 +811,7 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
.setup = pci_default_setup,
},
/*
- * Netmos cards
+ * Netmos cards - these may be called via parport_serial
*/
{
.vendor = PCI_VENDOR_ID_NETMOS,
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 48eb22d3a63e..7708e5dd3656 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -726,8 +726,7 @@ mpc52xx_uart_probe(struct platform_device *dev)
spin_lock_init(&port->lock);
port->uartclk = __res.bi_ipbfreq / 2; /* Look at CTLR doc */
- port->fifosize = 255; /* Should be 512 ! But it can't be */
- /* stored in a unsigned char */
+ port->fifosize = 512;
port->iotype = UPIO_MEM;
port->flags = UPF_BOOT_AUTOCONF |
( uart_console(port) ? 0 : UPF_IOREMAP );
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 95831808334c..d5f636fbf29a 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -696,7 +696,8 @@ static int uart_set_info(struct uart_state *state,
(new_serial.baud_base != port->uartclk / 16) ||
(close_delay != state->close_delay) ||
(closing_wait != state->closing_wait) ||
- (new_serial.xmit_fifo_size != port->fifosize) ||
+ (new_serial.xmit_fifo_size &&
+ new_serial.xmit_fifo_size != port->fifosize) ||
(((new_flags ^ old_flags) & ~UPF_USR_MASK) != 0))
goto exit;
port->flags = ((port->flags & ~UPF_USR_MASK) |
@@ -801,7 +802,8 @@ static int uart_set_info(struct uart_state *state,
port->custom_divisor = new_serial.custom_divisor;
state->close_delay = close_delay;
state->closing_wait = closing_wait;
- port->fifosize = new_serial.xmit_fifo_size;
+ if (new_serial.xmit_fifo_size)
+ port->fifosize = new_serial.xmit_fifo_size;
if (state->info->tty)
state->info->tty->low_latency =
(port->flags & UPF_LOW_LATENCY) ? 1 : 0;
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index fc1104a2cfa9..058cba70818a 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -216,10 +216,11 @@ struct uart_port {
unsigned char __iomem *membase; /* read/write[bwl] */
unsigned int irq; /* irq number */
unsigned int uartclk; /* base uart clock */
- unsigned char fifosize; /* tx fifo size */
+ unsigned int fifosize; /* tx fifo size */
unsigned char x_char; /* xon/xoff char */
unsigned char regshift; /* reg offset shift */
unsigned char iotype; /* io access style */
+ unsigned char unused1;
#define UPIO_PORT (0)
#define UPIO_HUB6 (1)