summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt16
-rw-r--r--Documentation/devicetree/bindings/thermal/qoriq-thermal.txt6
-rw-r--r--Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt5
-rw-r--r--Documentation/devicetree/bindings/thermal/rcar-thermal.txt6
-rw-r--r--Documentation/devicetree/bindings/thermal/stm32-thermal.txt61
-rw-r--r--Documentation/devicetree/bindings/thermal/thermal.txt2
-rw-r--r--drivers/thermal/Kconfig2
-rw-r--r--drivers/thermal/Makefile2
-rw-r--r--drivers/thermal/armada_thermal.c4
-rw-r--r--drivers/thermal/da9062-thermal.c4
-rw-r--r--drivers/thermal/hisi_thermal.c249
-rw-r--r--drivers/thermal/imx_thermal.c31
-rw-r--r--drivers/thermal/of-thermal.c152
-rw-r--r--drivers/thermal/qcom-spmi-temp-alarm.c158
-rw-r--r--drivers/thermal/qcom/tsens-8916.c12
-rw-r--r--drivers/thermal/qcom/tsens-8960.c41
-rw-r--r--drivers/thermal/qcom/tsens-8974.c12
-rw-r--r--drivers/thermal/qcom/tsens-common.c62
-rw-r--r--drivers/thermal/qcom/tsens-v2.c8
-rw-r--r--drivers/thermal/qcom/tsens.c19
-rw-r--r--drivers/thermal/qcom/tsens.h23
-rw-r--r--drivers/thermal/qoriq_thermal.c5
-rw-r--r--drivers/thermal/rcar_gen3_thermal.c2
-rw-r--r--drivers/thermal/rcar_thermal.c11
-rw-r--r--drivers/thermal/st/Kconfig14
-rw-r--r--drivers/thermal/st/Makefile1
-rw-r--r--drivers/thermal/st/stm_thermal.c760
27 files changed, 1365 insertions, 303 deletions
diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt b/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt
index 290ec06fa33a..0273a92a2a84 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt
+++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt
@@ -6,8 +6,7 @@ interrupt signal and status register to identify high PMIC die temperature.
Required properties:
- compatible: Should contain "qcom,spmi-temp-alarm".
-- reg: Specifies the SPMI address and length of the controller's
- registers.
+- reg: Specifies the SPMI address.
- interrupts: PMIC temperature alarm interrupt.
- #thermal-sensor-cells: Should be 0. See thermal.txt for a description.
@@ -20,7 +19,7 @@ Example:
pm8941_temp: thermal-alarm@2400 {
compatible = "qcom,spmi-temp-alarm";
- reg = <0x2400 0x100>;
+ reg = <0x2400>;
interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
#thermal-sensor-cells = <0>;
@@ -36,19 +35,14 @@ Example:
thermal-sensors = <&pm8941_temp>;
trips {
- passive {
- temperature = <1050000>;
+ stage1 {
+ temperature = <105000>;
hysteresis = <2000>;
type = "passive";
};
- alert {
+ stage2 {
temperature = <125000>;
hysteresis = <2000>;
- type = "hot";
- };
- crit {
- temperature = <145000>;
- hysteresis = <2000>;
type = "critical";
};
};
diff --git a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
index 20ca4ef9d776..04cbb90a5d3e 100644
--- a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
@@ -1,9 +1,9 @@
* Thermal Monitoring Unit (TMU) on Freescale QorIQ SoCs
Required properties:
-- compatible : Must include "fsl,qoriq-tmu". The version of the device is
- determined by the TMU IP Block Revision Register (IPBRR0) at
- offset 0x0BF8.
+- compatible : Must include "fsl,qoriq-tmu" or "fsl,imx8mq-tmu". The
+ version of the device is determined by the TMU IP Block Revision
+ Register (IPBRR0) at offset 0x0BF8.
Table of correspondences between IPBRR0 values and example chips:
Value Device
---------- -----
diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
index cfa154bb0fa7..ad9a435afef4 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
@@ -7,9 +7,11 @@ inside the LSI.
Required properties:
- compatible : "renesas,<soctype>-thermal",
Examples with soctypes are:
+ - "renesas,r8a774a1-thermal" (RZ/G2M)
- "renesas,r8a7795-thermal" (R-Car H3)
- "renesas,r8a7796-thermal" (R-Car M3-W)
- "renesas,r8a77965-thermal" (R-Car M3-N)
+ - "renesas,r8a77980-thermal" (R-Car V3H)
- reg : Address ranges of the thermal registers. Each sensor
needs one address range. Sorting must be done in
increasing order according to datasheet, i.e.
@@ -19,7 +21,8 @@ Required properties:
Optional properties:
-- interrupts : interrupts routed to the TSC (3 for H3, M3-W and M3-N)
+- interrupts : interrupts routed to the TSC (3 for H3, M3-W, M3-N,
+ and V3H)
- power-domain : Must contain a reference to the power domain. This
property is mandatory if the thermal sensor instance
is part of a controllable power domain.
diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
index 67c563f1b4c4..73e1613d2cb0 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
@@ -4,15 +4,17 @@ Required properties:
- compatible : "renesas,thermal-<soctype>",
"renesas,rcar-gen2-thermal" (with thermal-zone) or
"renesas,rcar-thermal" (without thermal-zone) as
- fallback except R-Car D3.
+ fallback except R-Car V3M/D3.
Examples with soctypes are:
- "renesas,thermal-r8a73a4" (R-Mobile APE6)
- "renesas,thermal-r8a7743" (RZ/G1M)
+ - "renesas,thermal-r8a7744" (RZ/G1N)
- "renesas,thermal-r8a7779" (R-Car H1)
- "renesas,thermal-r8a7790" (R-Car H2)
- "renesas,thermal-r8a7791" (R-Car M2-W)
- "renesas,thermal-r8a7792" (R-Car V2H)
- "renesas,thermal-r8a7793" (R-Car M2-N)
+ - "renesas,thermal-r8a77970" (R-Car V3M)
- "renesas,thermal-r8a77995" (R-Car D3)
- reg : Address range of the thermal registers.
The 1st reg will be recognized as common register
@@ -21,7 +23,7 @@ Required properties:
Option properties:
- interrupts : If present should contain 3 interrupts for
- R-Car D3 or 1 interrupt otherwise.
+ R-Car V3M/D3 or 1 interrupt otherwise.
Example (non interrupt support):
diff --git a/Documentation/devicetree/bindings/thermal/stm32-thermal.txt b/Documentation/devicetree/bindings/thermal/stm32-thermal.txt
new file mode 100644
index 000000000000..8c0d5a4d8031
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/stm32-thermal.txt
@@ -0,0 +1,61 @@
+Binding for Thermal Sensor for STMicroelectronics STM32 series of SoCs.
+
+On STM32 SoCs, the Digital Temperature Sensor (DTS) is in charge of managing an
+analog block which delivers a frequency depending on the internal SoC's
+temperature. By using a reference frequency, DTS is able to provide a sample
+number which can be translated into a temperature by the user.
+
+DTS provides interrupt notification mechanism by threshold. This mechanism
+offers two temperature trip points: passive and critical. The first is intended
+for passive cooling notification while the second is used for over-temperature
+reset.
+
+Required parameters:
+-------------------
+
+compatible: Should be "st,stm32-thermal"
+reg: This should be the physical base address and length of the
+ sensor's registers.
+clocks: Phandle of the clock used by the thermal sensor.
+ See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+clock-names: Should be "pclk" for register access clock and reference clock.
+ See: Documentation/devicetree/bindings/resource-names.txt
+#thermal-sensor-cells: Should be 0. See ./thermal.txt for a description.
+interrupts: Standard way to define interrupt number.
+
+Example:
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&thermal>;
+
+ trips {
+ cpu_alert1: cpu-alert1 {
+ temperature = <85000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ cpu-crit: cpu-crit {
+ temperature = <120000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ };
+ };
+ };
+
+ thermal: thermal@50028000 {
+ compatible = "st,stm32-thermal";
+ reg = <0x50028000 0x100>;
+ clocks = <&rcc TMPSENS>;
+ clock-names = "pclk";
+ #thermal-sensor-cells = <0>;
+ interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ };
diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt b/Documentation/devicetree/bindings/thermal/thermal.txt
index eb7ee91556a5..ca14ba959e0d 100644
--- a/Documentation/devicetree/bindings/thermal/thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/thermal.txt
@@ -152,7 +152,7 @@ Optional property:
Elem size: one cell the sensors listed in the thermal-sensors property.
Elem type: signed Coefficients defaults to 1, in case this property
is not specified. A simple linear polynomial is used:
- Z = c0 * x0 + c1 + x1 + ... + c(n-1) * x(n-1) + cn.
+ Z = c0 * x0 + c1 * x1 + ... + c(n-1) * x(n-1) + cn.
The coefficients are ordered and they match with sensors
by means of sensor ID. Additional coefficients are
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 0e69edc77d18..5422523c03f8 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -432,7 +432,7 @@ source "drivers/thermal/samsung/Kconfig"
endmenu
menu "STMicroelectronics thermal drivers"
-depends on ARCH_STI && OF
+depends on (ARCH_STI || ARCH_STM32) && OF
source "drivers/thermal/st/Kconfig"
endmenu
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 610344eb3e03..82bb50dc6423 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -53,7 +53,7 @@ obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/
obj-$(CONFIG_INT340X_THERMAL) += int340x_thermal/
obj-$(CONFIG_INTEL_BXT_PMIC_THERMAL) += intel_bxt_pmic_thermal.o
obj-$(CONFIG_INTEL_PCH_THERMAL) += intel_pch_thermal.o
-obj-$(CONFIG_ST_THERMAL) += st/
+obj-y += st/
obj-$(CONFIG_QCOM_TSENS) += qcom/
obj-y += tegra/
obj-$(CONFIG_HISI_THERMAL) += hisi_thermal.o
diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c
index 2c2f6d93034e..92f67d40f2e9 100644
--- a/drivers/thermal/armada_thermal.c
+++ b/drivers/thermal/armada_thermal.c
@@ -526,8 +526,8 @@ static int armada_thermal_probe_legacy(struct platform_device *pdev,
/* First memory region points towards the status register */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (IS_ERR(res))
- return PTR_ERR(res);
+ if (!res)
+ return -EIO;
/*
* Edit the resource start address and length to map over all the
diff --git a/drivers/thermal/da9062-thermal.c b/drivers/thermal/da9062-thermal.c
index dd8dd947b7f0..01b0cb994457 100644
--- a/drivers/thermal/da9062-thermal.c
+++ b/drivers/thermal/da9062-thermal.c
@@ -106,7 +106,7 @@ static void da9062_thermal_poll_on(struct work_struct *work)
THERMAL_EVENT_UNSPECIFIED);
delay = msecs_to_jiffies(thermal->zone->passive_delay);
- schedule_delayed_work(&thermal->work, delay);
+ queue_delayed_work(system_freezable_wq, &thermal->work, delay);
return;
}
@@ -125,7 +125,7 @@ static irqreturn_t da9062_thermal_irq_handler(int irq, void *data)
struct da9062_thermal *thermal = data;
disable_irq_nosync(thermal->irq);
- schedule_delayed_work(&thermal->work, 0);
+ queue_delayed_work(system_freezable_wq, &thermal->work, 0);
return IRQ_HANDLED;
}
diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c
index 761d0559c268..c4111a98f1a7 100644
--- a/drivers/thermal/hisi_thermal.c
+++ b/drivers/thermal/hisi_thermal.c
@@ -55,25 +55,39 @@
#define HI3660_TEMP_STEP (205)
#define HI3660_TEMP_LAG (4000)
-#define HI6220_DEFAULT_SENSOR 2
-#define HI3660_DEFAULT_SENSOR 1
+#define HI6220_CLUSTER0_SENSOR 2
+#define HI6220_CLUSTER1_SENSOR 1
+
+#define HI3660_LITTLE_SENSOR 0
+#define HI3660_BIG_SENSOR 1
+#define HI3660_G3D_SENSOR 2
+#define HI3660_MODEM_SENSOR 3
+
+struct hisi_thermal_data;
struct hisi_thermal_sensor {
+ struct hisi_thermal_data *data;
struct thermal_zone_device *tzd;
+ const char *irq_name;
uint32_t id;
uint32_t thres_temp;
};
+struct hisi_thermal_ops {
+ int (*get_temp)(struct hisi_thermal_sensor *sensor);
+ int (*enable_sensor)(struct hisi_thermal_sensor *sensor);
+ int (*disable_sensor)(struct hisi_thermal_sensor *sensor);
+ int (*irq_handler)(struct hisi_thermal_sensor *sensor);
+ int (*probe)(struct hisi_thermal_data *data);
+};
+
struct hisi_thermal_data {
- int (*get_temp)(struct hisi_thermal_data *data);
- int (*enable_sensor)(struct hisi_thermal_data *data);
- int (*disable_sensor)(struct hisi_thermal_data *data);
- int (*irq_handler)(struct hisi_thermal_data *data);
+ const struct hisi_thermal_ops *ops;
+ struct hisi_thermal_sensor *sensor;
struct platform_device *pdev;
struct clk *clk;
- struct hisi_thermal_sensor sensor;
void __iomem *regs;
- int irq;
+ int nr_sensors;
};
/*
@@ -266,30 +280,40 @@ static inline void hi6220_thermal_hdak_set(void __iomem *addr, int value)
(value << 4), addr + HI6220_TEMP0_CFG);
}
-static int hi6220_thermal_irq_handler(struct hisi_thermal_data *data)
+static int hi6220_thermal_irq_handler(struct hisi_thermal_sensor *sensor)
{
+ struct hisi_thermal_data *data = sensor->data;
+
hi6220_thermal_alarm_clear(data->regs, 1);
return 0;
}
-static int hi3660_thermal_irq_handler(struct hisi_thermal_data *data)
+static int hi3660_thermal_irq_handler(struct hisi_thermal_sensor *sensor)
{
- hi3660_thermal_alarm_clear(data->regs, data->sensor.id, 1);
+ struct hisi_thermal_data *data = sensor->data;
+
+ hi3660_thermal_alarm_clear(data->regs, sensor->id, 1);
return 0;
}
-static int hi6220_thermal_get_temp(struct hisi_thermal_data *data)
+static int hi6220_thermal_get_temp(struct hisi_thermal_sensor *sensor)
{
+ struct hisi_thermal_data *data = sensor->data;
+
return hi6220_thermal_get_temperature(data->regs);
}
-static int hi3660_thermal_get_temp(struct hisi_thermal_data *data)
+static int hi3660_thermal_get_temp(struct hisi_thermal_sensor *sensor)
{
- return hi3660_thermal_get_temperature(data->regs, data->sensor.id);
+ struct hisi_thermal_data *data = sensor->data;
+
+ return hi3660_thermal_get_temperature(data->regs, sensor->id);
}
-static int hi6220_thermal_disable_sensor(struct hisi_thermal_data *data)
+static int hi6220_thermal_disable_sensor(struct hisi_thermal_sensor *sensor)
{
+ struct hisi_thermal_data *data = sensor->data;
+
/* disable sensor module */
hi6220_thermal_enable(data->regs, 0);
hi6220_thermal_alarm_enable(data->regs, 0);
@@ -300,16 +324,18 @@ static int hi6220_thermal_disable_sensor(struct hisi_thermal_data *data)
return 0;
}
-static int hi3660_thermal_disable_sensor(struct hisi_thermal_data *data)
+static int hi3660_thermal_disable_sensor(struct hisi_thermal_sensor *sensor)
{
+ struct hisi_thermal_data *data = sensor->data;
+
/* disable sensor module */
- hi3660_thermal_alarm_enable(data->regs, data->sensor.id, 0);
+ hi3660_thermal_alarm_enable(data->regs, sensor->id, 0);
return 0;
}
-static int hi6220_thermal_enable_sensor(struct hisi_thermal_data *data)
+static int hi6220_thermal_enable_sensor(struct hisi_thermal_sensor *sensor)
{
- struct hisi_thermal_sensor *sensor = &data->sensor;
+ struct hisi_thermal_data *data = sensor->data;
int ret;
/* enable clock for tsensor */
@@ -345,10 +371,10 @@ static int hi6220_thermal_enable_sensor(struct hisi_thermal_data *data)
return 0;
}
-static int hi3660_thermal_enable_sensor(struct hisi_thermal_data *data)
+static int hi3660_thermal_enable_sensor(struct hisi_thermal_sensor *sensor)
{
unsigned int value;
- struct hisi_thermal_sensor *sensor = &data->sensor;
+ struct hisi_thermal_data *data = sensor->data;
/* disable interrupt */
hi3660_thermal_alarm_enable(data->regs, sensor->id, 0);
@@ -371,21 +397,8 @@ static int hi6220_thermal_probe(struct hisi_thermal_data *data)
{
struct platform_device *pdev = data->pdev;
struct device *dev = &pdev->dev;
- struct resource *res;
int ret;
- data->get_temp = hi6220_thermal_get_temp;
- data->enable_sensor = hi6220_thermal_enable_sensor;
- data->disable_sensor = hi6220_thermal_disable_sensor;
- data->irq_handler = hi6220_thermal_irq_handler;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- data->regs = devm_ioremap_resource(dev, res);
- if (IS_ERR(data->regs)) {
- dev_err(dev, "failed to get io address\n");
- return PTR_ERR(data->regs);
- }
-
data->clk = devm_clk_get(dev, "thermal_clk");
if (IS_ERR(data->clk)) {
ret = PTR_ERR(data->clk);
@@ -394,11 +407,14 @@ static int hi6220_thermal_probe(struct hisi_thermal_data *data)
return ret;
}
- data->irq = platform_get_irq(pdev, 0);
- if (data->irq < 0)
- return data->irq;
+ data->sensor = devm_kzalloc(dev, sizeof(*data->sensor), GFP_KERNEL);
+ if (!data->sensor)
+ return -ENOMEM;
- data->sensor.id = HI6220_DEFAULT_SENSOR;
+ data->sensor[0].id = HI6220_CLUSTER0_SENSOR;
+ data->sensor[0].irq_name = "tsensor_intr";
+ data->sensor[0].data = data;
+ data->nr_sensors = 1;
return 0;
}
@@ -407,38 +423,34 @@ static int hi3660_thermal_probe(struct hisi_thermal_data *data)
{
struct platform_device *pdev = data->pdev;
struct device *dev = &pdev->dev;
- struct resource *res;
- data->get_temp = hi3660_thermal_get_temp;
- data->enable_sensor = hi3660_thermal_enable_sensor;
- data->disable_sensor = hi3660_thermal_disable_sensor;
- data->irq_handler = hi3660_thermal_irq_handler;
+ data->nr_sensors = 2;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- data->regs = devm_ioremap_resource(dev, res);
- if (IS_ERR(data->regs)) {
- dev_err(dev, "failed to get io address\n");
- return PTR_ERR(data->regs);
- }
+ data->sensor = devm_kzalloc(dev, sizeof(*data->sensor) *
+ data->nr_sensors, GFP_KERNEL);
+ if (!data->sensor)
+ return -ENOMEM;
- data->irq = platform_get_irq(pdev, 0);
- if (data->irq < 0)
- return data->irq;
+ data->sensor[0].id = HI3660_BIG_SENSOR;
+ data->sensor[0].irq_name = "tsensor_a73";
+ data->sensor[0].data = data;
- data->sensor.id = HI3660_DEFAULT_SENSOR;
+ data->sensor[1].id = HI3660_LITTLE_SENSOR;
+ data->sensor[1].irq_name = "tsensor_a53";
+ data->sensor[1].data = data;
return 0;
}
static int hisi_thermal_get_temp(void *__data, int *temp)
{
- struct hisi_thermal_data *data = __data;
- struct hisi_thermal_sensor *sensor = &data->sensor;
+ struct hisi_thermal_sensor *sensor = __data;
+ struct hisi_thermal_data *data = sensor->data;
- *temp = data->get_temp(data);
+ *temp = data->ops->get_temp(sensor);
- dev_dbg(&data->pdev->dev, "id=%d, temp=%d, thres=%d\n",
- sensor->id, *temp, sensor->thres_temp);
+ dev_dbg(&data->pdev->dev, "tzd=%p, id=%d, temp=%d, thres=%d\n",
+ sensor->tzd, sensor->id, *temp, sensor->thres_temp);
return 0;
}
@@ -449,38 +461,39 @@ static const struct thermal_zone_of_device_ops hisi_of_thermal_ops = {
static irqreturn_t hisi_thermal_alarm_irq_thread(int irq, void *dev)
{
- struct hisi_thermal_data *data = dev;
- struct hisi_thermal_sensor *sensor = &data->sensor;
+ struct hisi_thermal_sensor *sensor = dev;
+ struct hisi_thermal_data *data = sensor->data;
int temp = 0;
- data->irq_handler(data);
+ data->ops->irq_handler(sensor);
- hisi_thermal_get_temp(data, &temp);
+ hisi_thermal_get_temp(sensor, &temp);
if (temp >= sensor->thres_temp) {
- dev_crit(&data->pdev->dev, "THERMAL ALARM: %d > %d\n",
- temp, sensor->thres_temp);
+ dev_crit(&data->pdev->dev,
+ "sensor <%d> THERMAL ALARM: %d > %d\n",
+ sensor->id, temp, sensor->thres_temp);
- thermal_zone_device_update(data->sensor.tzd,
+ thermal_zone_device_update(sensor->tzd,
THERMAL_EVENT_UNSPECIFIED);
} else {
- dev_crit(&data->pdev->dev, "THERMAL ALARM stopped: %d < %d\n",
- temp, sensor->thres_temp);
+ dev_crit(&data->pdev->dev,
+ "sensor <%d> THERMAL ALARM stopped: %d < %d\n",
+ sensor->id, temp, sensor->thres_temp);
}
return IRQ_HANDLED;
}
static int hisi_thermal_register_sensor(struct platform_device *pdev,
- struct hisi_thermal_data *data,
struct hisi_thermal_sensor *sensor)
{
int ret, i;
const struct thermal_trip *trip;
sensor->tzd = devm_thermal_zone_of_sensor_register(&pdev->dev,
- sensor->id, data,
+ sensor->id, sensor,
&hisi_of_thermal_ops);
if (IS_ERR(sensor->tzd)) {
ret = PTR_ERR(sensor->tzd);
@@ -502,14 +515,30 @@ static int hisi_thermal_register_sensor(struct platform_device *pdev,
return 0;
}
+static const struct hisi_thermal_ops hi6220_ops = {
+ .get_temp = hi6220_thermal_get_temp,
+ .enable_sensor = hi6220_thermal_enable_sensor,
+ .disable_sensor = hi6220_thermal_disable_sensor,
+ .irq_handler = hi6220_thermal_irq_handler,
+ .probe = hi6220_thermal_probe,
+};
+
+static const struct hisi_thermal_ops hi3660_ops = {
+ .get_temp = hi3660_thermal_get_temp,
+ .enable_sensor = hi3660_thermal_enable_sensor,
+ .disable_sensor = hi3660_thermal_disable_sensor,
+ .irq_handler = hi3660_thermal_irq_handler,
+ .probe = hi3660_thermal_probe,
+};
+
static const struct of_device_id of_hisi_thermal_match[] = {
{
.compatible = "hisilicon,tsensor",
- .data = hi6220_thermal_probe
+ .data = &hi6220_ops,
},
{
.compatible = "hisilicon,hi3660-tsensor",
- .data = hi3660_thermal_probe
+ .data = &hi3660_ops,
},
{ /* end */ }
};
@@ -527,9 +556,9 @@ static void hisi_thermal_toggle_sensor(struct hisi_thermal_sensor *sensor,
static int hisi_thermal_probe(struct platform_device *pdev)
{
struct hisi_thermal_data *data;
- int (*platform_probe)(struct hisi_thermal_data *);
struct device *dev = &pdev->dev;
- int ret;
+ struct resource *res;
+ int i, ret;
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
@@ -537,41 +566,50 @@ static int hisi_thermal_probe(struct platform_device *pdev)
data->pdev = pdev;
platform_set_drvdata(pdev, data);
+ data->ops = of_device_get_match_data(dev);
- platform_probe = of_device_get_match_data(dev);
- if (!platform_probe) {
- dev_err(dev, "failed to get probe func\n");
- return -EINVAL;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ data->regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(data->regs)) {
+ dev_err(dev, "failed to get io address\n");
+ return PTR_ERR(data->regs);
}
- ret = platform_probe(data);
+ ret = data->ops->probe(data);
if (ret)
return ret;
- ret = hisi_thermal_register_sensor(pdev, data,
- &data->sensor);
- if (ret) {
- dev_err(dev, "failed to register thermal sensor: %d\n", ret);
- return ret;
- }
+ for (i = 0; i < data->nr_sensors; i++) {
+ struct hisi_thermal_sensor *sensor = &data->sensor[i];
- ret = data->enable_sensor(data);
- if (ret) {
- dev_err(dev, "Failed to setup the sensor: %d\n", ret);
- return ret;
- }
+ ret = hisi_thermal_register_sensor(pdev, sensor);
+ if (ret) {
+ dev_err(dev, "failed to register thermal sensor: %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = platform_get_irq_byname(pdev, sensor->irq_name);
+ if (ret < 0)
+ return ret;
- if (data->irq) {
- ret = devm_request_threaded_irq(dev, data->irq, NULL,
- hisi_thermal_alarm_irq_thread,
- IRQF_ONESHOT, "hisi_thermal", data);
+ ret = devm_request_threaded_irq(dev, ret, NULL,
+ hisi_thermal_alarm_irq_thread,
+ IRQF_ONESHOT, sensor->irq_name,
+ sensor);
if (ret < 0) {
- dev_err(dev, "failed to request alarm irq: %d\n", ret);
+ dev_err(dev, "Failed to request alarm irq: %d\n", ret);
return ret;
}
- }
- hisi_thermal_toggle_sensor(&data->sensor, true);
+ ret = data->ops->enable_sensor(sensor);
+ if (ret) {
+ dev_err(dev, "Failed to setup the sensor: %d\n", ret);
+ return ret;
+ }
+
+ hisi_thermal_toggle_sensor(sensor, true);
+ }
return 0;
}
@@ -579,11 +617,14 @@ static int hisi_thermal_probe(struct platform_device *pdev)
static int hisi_thermal_remove(struct platform_device *pdev)
{
struct hisi_thermal_data *data = platform_get_drvdata(pdev);
- struct hisi_thermal_sensor *sensor = &data->sensor;
+ int i;
- hisi_thermal_toggle_sensor(sensor, false);
+ for (i = 0; i < data->nr_sensors; i++) {
+ struct hisi_thermal_sensor *sensor = &data->sensor[i];
- data->disable_sensor(data);
+ hisi_thermal_toggle_sensor(sensor, false);
+ data->ops->disable_sensor(sensor);
+ }
return 0;
}
@@ -592,8 +633,10 @@ static int hisi_thermal_remove(struct platform_device *pdev)
static int hisi_thermal_suspend(struct device *dev)
{
struct hisi_thermal_data *data = dev_get_drvdata(dev);
+ int i;
- data->disable_sensor(data);
+ for (i = 0; i < data->nr_sensors; i++)
+ data->ops->disable_sensor(&data->sensor[i]);
return 0;
}
@@ -601,8 +644,12 @@ static int hisi_thermal_suspend(struct device *dev)
static int hisi_thermal_resume(struct device *dev)
{
struct hisi_thermal_data *data = dev_get_drvdata(dev);
+ int i, ret = 0;
+
+ for (i = 0; i < data->nr_sensors; i++)
+ ret |= data->ops->enable_sensor(&data->sensor[i]);
- return data->enable_sensor(data);
+ return ret;
}
#endif
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index aa452acb60b6..15661549eb67 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -725,7 +725,7 @@ static int imx_thermal_probe(struct platform_device *pdev)
} else {
ret = imx_init_from_tempmon_data(pdev);
if (ret) {
- dev_err(&pdev->dev, "failed to init from from fsl,tempmon-data\n");
+ dev_err(&pdev->dev, "failed to init from fsl,tempmon-data\n");
return ret;
}
}
@@ -762,9 +762,7 @@ static int imx_thermal_probe(struct platform_device *pdev)
if (ret != -EPROBE_DEFER)
dev_err(&pdev->dev,
"failed to get thermal clk: %d\n", ret);
- cpufreq_cooling_unregister(data->cdev);
- cpufreq_cpu_put(data->policy);
- return ret;
+ goto cpufreq_put;
}
/*
@@ -777,9 +775,7 @@ static int imx_thermal_probe(struct platform_device *pdev)
ret = clk_prepare_enable(data->thermal_clk);
if (ret) {
dev_err(&pdev->dev, "failed to enable thermal clk: %d\n", ret);
- cpufreq_cooling_unregister(data->cdev);
- cpufreq_cpu_put(data->policy);
- return ret;
+ goto cpufreq_put;
}
data->tz = thermal_zone_device_register("imx_thermal_zone",
@@ -792,10 +788,7 @@ static int imx_thermal_probe(struct platform_device *pdev)
ret = PTR_ERR(data->tz);
dev_err(&pdev->dev,
"failed to register thermal zone device %d\n", ret);
- clk_disable_unprepare(data->thermal_clk);
- cpufreq_cooling_unregister(data->cdev);
- cpufreq_cpu_put(data->policy);
- return ret;
+ goto clk_disable;
}
dev_info(&pdev->dev, "%s CPU temperature grade - max:%dC"
@@ -827,14 +820,20 @@ static int imx_thermal_probe(struct platform_device *pdev)
0, "imx_thermal", data);
if (ret < 0) {
dev_err(&pdev->dev, "failed to request alarm irq: %d\n", ret);
- clk_disable_unprepare(data->thermal_clk);
- thermal_zone_device_unregister(data->tz);
- cpufreq_cooling_unregister(data->cdev);
- cpufreq_cpu_put(data->policy);
- return ret;
+ goto thermal_zone_unregister;
}
return 0;
+
+thermal_zone_unregister:
+ thermal_zone_device_unregister(data->tz);
+clk_disable:
+ clk_disable_unprepare(data->thermal_clk);
+cpufreq_put:
+ cpufreq_cooling_unregister(data->cdev);
+ cpufreq_cpu_put(data->policy);
+
+ return ret;
}
static int imx_thermal_remove(struct platform_device *pdev)
diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c
index 4f2816559205..4bfdb4a1e47d 100644
--- a/drivers/thermal/of-thermal.c
+++ b/drivers/thermal/of-thermal.c
@@ -19,23 +19,34 @@
/*** Private data structures to represent thermal device tree data ***/
/**
- * struct __thermal_bind_param - a match between trip and cooling device
+ * struct __thermal_cooling_bind_param - a cooling device for a trip point
* @cooling_device: a pointer to identify the referred cooling device
- * @trip_id: the trip point index
- * @usage: the percentage (from 0 to 100) of cooling contribution
* @min: minimum cooling state used at this trip point
* @max: maximum cooling state used at this trip point
*/
-struct __thermal_bind_params {
+struct __thermal_cooling_bind_param {
struct device_node *cooling_device;
- unsigned int trip_id;
- unsigned int usage;
unsigned long min;
unsigned long max;
};
/**
+ * struct __thermal_bind_param - a match between trip and cooling device
+ * @tcbp: a pointer to an array of cooling devices
+ * @count: number of elements in array
+ * @trip_id: the trip point index
+ * @usage: the percentage (from 0 to 100) of cooling contribution
+ */
+
+struct __thermal_bind_params {
+ struct __thermal_cooling_bind_param *tcbp;
+ unsigned int count;
+ unsigned int trip_id;
+ unsigned int usage;
+};
+
+/**
* struct __thermal_zone - internal representation of a thermal zone
* @mode: current thermal zone device mode (enabled/disabled)
* @passive_delay: polling interval while passive cooling is activated
@@ -192,25 +203,31 @@ static int of_thermal_bind(struct thermal_zone_device *thermal,
struct thermal_cooling_device *cdev)
{
struct __thermal_zone *data = thermal->devdata;
- int i;
+ struct __thermal_bind_params *tbp;
+ struct __thermal_cooling_bind_param *tcbp;
+ int i, j;
if (!data || IS_ERR(data))
return -ENODEV;
/* find where to bind */
for (i = 0; i < data->num_tbps; i++) {
- struct __thermal_bind_params *tbp = data->tbps + i;
+ tbp = data->tbps + i;
- if (tbp->cooling_device == cdev->np) {
- int ret;
+ for (j = 0; j < tbp->count; j++) {
+ tcbp = tbp->tcbp + j;
- ret = thermal_zone_bind_cooling_device(thermal,
+ if (tcbp->cooling_device == cdev->np) {
+ int ret;
+
+ ret = thermal_zone_bind_cooling_device(thermal,
tbp->trip_id, cdev,
- tbp->max,
- tbp->min,
+ tcbp->max,
+ tcbp->min,
tbp->usage);
- if (ret)
- return ret;
+ if (ret)
+ return ret;
+ }
}
}
@@ -221,22 +238,28 @@ static int of_thermal_unbind(struct thermal_zone_device *thermal,
struct thermal_cooling_device *cdev)
{
struct __thermal_zone *data = thermal->devdata;
- int i;
+ struct __thermal_bind_params *tbp;
+ struct __thermal_cooling_bind_param *tcbp;
+ int i, j;
if (!data || IS_ERR(data))
return -ENODEV;
/* find where to unbind */
for (i = 0; i < data->num_tbps; i++) {
- struct __thermal_bind_params *tbp = data->tbps + i;
+ tbp = data->tbps + i;
+
+ for (j = 0; j < tbp->count; j++) {
+ tcbp = tbp->tcbp + j;
- if (tbp->cooling_device == cdev->np) {
- int ret;
+ if (tcbp->cooling_device == cdev->np) {
+ int ret;
- ret = thermal_zone_unbind_cooling_device(thermal,
- tbp->trip_id, cdev);
- if (ret)
- return ret;
+ ret = thermal_zone_unbind_cooling_device(thermal,
+ tbp->trip_id, cdev);
+ if (ret)
+ return ret;
+ }
}
}
@@ -486,8 +509,8 @@ thermal_zone_of_sensor_register(struct device *dev, int sensor_id, void *data,
if (sensor_specs.args_count >= 1) {
id = sensor_specs.args[0];
WARN(sensor_specs.args_count > 1,
- "%s: too many cells in sensor specifier %d\n",
- sensor_specs.np->name, sensor_specs.args_count);
+ "%pOFn: too many cells in sensor specifier %d\n",
+ sensor_specs.np, sensor_specs.args_count);
} else {
id = 0;
}
@@ -655,8 +678,9 @@ static int thermal_of_populate_bind_params(struct device_node *np,
int ntrips)
{
struct of_phandle_args cooling_spec;
+ struct __thermal_cooling_bind_param *__tcbp;
struct device_node *trip;
- int ret, i;
+ int ret, i, count;
u32 prop;
/* Default weight. Usage is optional */
@@ -683,20 +707,44 @@ static int thermal_of_populate_bind_params(struct device_node *np,
goto end;
}
- ret = of_parse_phandle_with_args(np, "cooling-device", "#cooling-cells",
- 0, &cooling_spec);
- if (ret < 0) {
- pr_err("missing cooling_device property\n");
+ count = of_count_phandle_with_args(np, "cooling-device",
+ "#cooling-cells");
+ if (!count) {
+ pr_err("Add a cooling_device property with at least one device\n");
goto end;
}
- __tbp->cooling_device = cooling_spec.np;
- if (cooling_spec.args_count >= 2) { /* at least min and max */
- __tbp->min = cooling_spec.args[0];
- __tbp->max = cooling_spec.args[1];
- } else {
- pr_err("wrong reference to cooling device, missing limits\n");
+
+ __tcbp = kcalloc(count, sizeof(*__tcbp), GFP_KERNEL);
+ if (!__tcbp)
+ goto end;
+
+ for (i = 0; i < count; i++) {
+ ret = of_parse_phandle_with_args(np, "cooling-device",
+ "#cooling-cells", i, &cooling_spec);
+ if (ret < 0) {
+ pr_err("Invalid cooling-device entry\n");
+ goto free_tcbp;
+ }
+
+ __tcbp[i].cooling_device = cooling_spec.np;
+
+ if (cooling_spec.args_count >= 2) { /* at least min and max */
+ __tcbp[i].min = cooling_spec.args[0];
+ __tcbp[i].max = cooling_spec.args[1];
+ } else {
+ pr_err("wrong reference to cooling device, missing limits\n");
+ }
}
+ __tbp->tcbp = __tcbp;
+ __tbp->count = count;
+
+ goto end;
+
+free_tcbp:
+ for (i = i - 1; i >= 0; i--)
+ of_node_put(__tcbp[i].cooling_device);
+ kfree(__tcbp);
end:
of_node_put(trip);
@@ -903,8 +951,16 @@ finish:
return tz;
free_tbps:
- for (i = i - 1; i >= 0; i--)
- of_node_put(tz->tbps[i].cooling_device);
+ for (i = i - 1; i >= 0; i--) {
+ struct __thermal_bind_params *tbp = tz->tbps + i;
+ int j;
+
+ for (j = 0; j < tbp->count; j++)
+ of_node_put(tbp->tcbp[j].cooling_device);
+
+ kfree(tbp->tcbp);
+ }
+
kfree(tz->tbps);
free_trips:
for (i = 0; i < tz->ntrips; i++)
@@ -920,10 +976,18 @@ free_tz:
static inline void of_thermal_free_zone(struct __thermal_zone *tz)
{
- int i;
+ struct __thermal_bind_params *tbp;
+ int i, j;
+
+ for (i = 0; i < tz->num_tbps; i++) {
+ tbp = tz->tbps + i;
+
+ for (j = 0; j < tbp->count; j++)
+ of_node_put(tbp->tcbp[j].cooling_device);
+
+ kfree(tbp->tcbp);
+ }
- for (i = 0; i < tz->num_tbps; i++)
- of_node_put(tz->tbps[i].cooling_device);
kfree(tz->tbps);
for (i = 0; i < tz->ntrips; i++)
of_node_put(tz->trips[i].np);
@@ -963,8 +1027,8 @@ int __init of_parse_thermal_zones(void)
tz = thermal_of_build_thermal_zone(child);
if (IS_ERR(tz)) {
- pr_err("failed to build thermal zone %s: %ld\n",
- child->name,
+ pr_err("failed to build thermal zone %pOFn: %ld\n",
+ child,
PTR_ERR(tz));
continue;
}
@@ -998,7 +1062,7 @@ int __init of_parse_thermal_zones(void)
tz->passive_delay,
tz->polling_delay);
if (IS_ERR(zone)) {
- pr_err("Failed to build %s zone %ld\n", child->name,
+ pr_err("Failed to build %pOFn zone %ld\n", child,
PTR_ERR(zone));
kfree(tzp);
kfree(ops);
diff --git a/drivers/thermal/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom-spmi-temp-alarm.c
index ad4f3a8d6560..b2d5d5bf4a9b 100644
--- a/drivers/thermal/qcom-spmi-temp-alarm.c
+++ b/drivers/thermal/qcom-spmi-temp-alarm.c
@@ -23,6 +23,8 @@
#include <linux/regmap.h>
#include <linux/thermal.h>
+#include "thermal_core.h"
+
#define QPNP_TM_REG_TYPE 0x04
#define QPNP_TM_REG_SUBTYPE 0x05
#define QPNP_TM_REG_STATUS 0x08
@@ -37,9 +39,11 @@
#define STATUS_GEN2_STATE_MASK GENMASK(6, 4)
#define STATUS_GEN2_STATE_SHIFT 4
-#define SHUTDOWN_CTRL1_OVERRIDE_MASK GENMASK(7, 6)
+#define SHUTDOWN_CTRL1_OVERRIDE_S2 BIT(6)
#define SHUTDOWN_CTRL1_THRESHOLD_MASK GENMASK(1, 0)
+#define SHUTDOWN_CTRL1_RATE_25HZ BIT(3)
+
#define ALARM_CTRL_FORCE_ENABLE BIT(7)
/*
@@ -56,12 +60,19 @@
#define TEMP_THRESH_STEP 5000 /* Threshold step: 5 C */
#define THRESH_MIN 0
+#define THRESH_MAX 3
+
+/* Stage 2 Threshold Min: 125 C */
+#define STAGE2_THRESHOLD_MIN 125000
+/* Stage 2 Threshold Max: 140 C */
+#define STAGE2_THRESHOLD_MAX 140000
/* Temperature in Milli Celsius reported during stage 0 if no ADC is present */
#define DEFAULT_TEMP 37000
struct qpnp_tm_chip {
struct regmap *map;
+ struct device *dev;
struct thermal_zone_device *tz_dev;
unsigned int subtype;
long temp;
@@ -69,6 +80,10 @@ struct qpnp_tm_chip {
unsigned int stage;
unsigned int prev_stage;
unsigned int base;
+ /* protects .thresh, .stage and chip registers */
+ struct mutex lock;
+ bool initialized;
+
struct iio_channel *adc;
};
@@ -125,6 +140,8 @@ static int qpnp_tm_update_temp_no_adc(struct qpnp_tm_chip *chip)
unsigned int stage, stage_new, stage_old;
int ret;
+ WARN_ON(!mutex_is_locked(&chip->lock));
+
ret = qpnp_tm_get_temp_stage(chip);
if (ret < 0)
return ret;
@@ -163,8 +180,15 @@ static int qpnp_tm_get_temp(void *data, int *temp)
if (!temp)
return -EINVAL;
+ if (!chip->initialized) {
+ *temp = DEFAULT_TEMP;
+ return 0;
+ }
+
if (!chip->adc) {
+ mutex_lock(&chip->lock);
ret = qpnp_tm_update_temp_no_adc(chip);
+ mutex_unlock(&chip->lock);
if (ret < 0)
return ret;
} else {
@@ -180,8 +204,72 @@ static int qpnp_tm_get_temp(void *data, int *temp)
return 0;
}
+static int qpnp_tm_update_critical_trip_temp(struct qpnp_tm_chip *chip,
+ int temp)
+{
+ u8 reg;
+ bool disable_s2_shutdown = false;
+
+ WARN_ON(!mutex_is_locked(&chip->lock));
+
+ /*
+ * Default: S2 and S3 shutdown enabled, thresholds at
+ * 105C/125C/145C, monitoring at 25Hz
+ */
+ reg = SHUTDOWN_CTRL1_RATE_25HZ;
+
+ if (temp == THERMAL_TEMP_INVALID ||
+ temp < STAGE2_THRESHOLD_MIN) {
+ chip->thresh = THRESH_MIN;
+ goto skip;
+ }
+
+ if (temp <= STAGE2_THRESHOLD_MAX) {
+ chip->thresh = THRESH_MAX -
+ ((STAGE2_THRESHOLD_MAX - temp) /
+ TEMP_THRESH_STEP);
+ disable_s2_shutdown = true;
+ } else {
+ chip->thresh = THRESH_MAX;
+
+ if (chip->adc)
+ disable_s2_shutdown = true;
+ else
+ dev_warn(chip->dev,
+ "No ADC is configured and critical temperature is above the maximum stage 2 threshold of 140 C! Configuring stage 2 shutdown at 140 C.\n");
+ }
+
+skip:
+ reg |= chip->thresh;
+ if (disable_s2_shutdown)
+ reg |= SHUTDOWN_CTRL1_OVERRIDE_S2;
+
+ return qpnp_tm_write(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, reg);
+}
+
+static int qpnp_tm_set_trip_temp(void *data, int trip, int temp)
+{
+ struct qpnp_tm_chip *chip = data;
+ const struct thermal_trip *trip_points;
+ int ret;
+
+ trip_points = of_thermal_get_trip_points(chip->tz_dev);
+ if (!trip_points)
+ return -EINVAL;
+
+ if (trip_points[trip].type != THERMAL_TRIP_CRITICAL)
+ return 0;
+
+ mutex_lock(&chip->lock);
+ ret = qpnp_tm_update_critical_trip_temp(chip, temp);
+ mutex_unlock(&chip->lock);
+
+ return ret;
+}
+
static const struct thermal_zone_of_device_ops qpnp_tm_sensor_ops = {
.get_temp = qpnp_tm_get_temp,
+ .set_trip_temp = qpnp_tm_set_trip_temp,
};
static irqreturn_t qpnp_tm_isr(int irq, void *data)
@@ -193,6 +281,29 @@ static irqreturn_t qpnp_tm_isr(int irq, void *data)
return IRQ_HANDLED;
}
+static int qpnp_tm_get_critical_trip_temp(struct qpnp_tm_chip *chip)
+{
+ int ntrips;
+ const struct thermal_trip *trips;
+ int i;
+
+ ntrips = of_thermal_get_ntrips(chip->tz_dev);
+ if (ntrips <= 0)
+ return THERMAL_TEMP_INVALID;
+
+ trips = of_thermal_get_trip_points(chip->tz_dev);
+ if (!trips)
+ return THERMAL_TEMP_INVALID;
+
+ for (i = 0; i < ntrips; i++) {
+ if (of_thermal_is_trip_valid(chip->tz_dev, i) &&
+ trips[i].type == THERMAL_TRIP_CRITICAL)
+ return trips[i].temperature;
+ }
+
+ return THERMAL_TEMP_INVALID;
+}
+
/*
* This function initializes the internal temp value based on only the
* current thermal stage and threshold. Setup threshold control and
@@ -203,17 +314,20 @@ static int qpnp_tm_init(struct qpnp_tm_chip *chip)
unsigned int stage;
int ret;
u8 reg = 0;
+ int crit_temp;
+
+ mutex_lock(&chip->lock);
ret = qpnp_tm_read(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, &reg);
if (ret < 0)
- return ret;
+ goto out;
chip->thresh = reg & SHUTDOWN_CTRL1_THRESHOLD_MASK;
chip->temp = DEFAULT_TEMP;
ret = qpnp_tm_get_temp_stage(chip);
if (ret < 0)
- return ret;
+ goto out;
chip->stage = ret;
stage = chip->subtype == QPNP_TM_SUBTYPE_GEN1
@@ -224,21 +338,19 @@ static int qpnp_tm_init(struct qpnp_tm_chip *chip)
(stage - 1) * TEMP_STAGE_STEP +
TEMP_THRESH_MIN;
- /*
- * Set threshold and disable software override of stage 2 and 3
- * shutdowns.
- */
- chip->thresh = THRESH_MIN;
- reg &= ~(SHUTDOWN_CTRL1_OVERRIDE_MASK | SHUTDOWN_CTRL1_THRESHOLD_MASK);
- reg |= chip->thresh & SHUTDOWN_CTRL1_THRESHOLD_MASK;
- ret = qpnp_tm_write(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, reg);
+ crit_temp = qpnp_tm_get_critical_trip_temp(chip);
+ ret = qpnp_tm_update_critical_trip_temp(chip, crit_temp);
if (ret < 0)
- return ret;
+ goto out;
/* Enable the thermal alarm PMIC module in always-on mode. */
reg = ALARM_CTRL_FORCE_ENABLE;
ret = qpnp_tm_write(chip, QPNP_TM_REG_ALARM_CTRL, reg);
+ chip->initialized = true;
+
+out:
+ mutex_unlock(&chip->lock);
return ret;
}
@@ -257,6 +369,9 @@ static int qpnp_tm_probe(struct platform_device *pdev)
return -ENOMEM;
dev_set_drvdata(&pdev->dev, chip);
+ chip->dev = &pdev->dev;
+
+ mutex_init(&chip->lock);
chip->map = dev_get_regmap(pdev->dev.parent, NULL);
if (!chip->map)
@@ -302,6 +417,18 @@ static int qpnp_tm_probe(struct platform_device *pdev)
chip->subtype = subtype;
+ /*
+ * Register the sensor before initializing the hardware to be able to
+ * read the trip points. get_temp() returns the default temperature
+ * before the hardware initialization is completed.
+ */
+ chip->tz_dev = devm_thermal_zone_of_sensor_register(
+ &pdev->dev, 0, chip, &qpnp_tm_sensor_ops);
+ if (IS_ERR(chip->tz_dev)) {
+ dev_err(&pdev->dev, "failed to register sensor\n");
+ return PTR_ERR(chip->tz_dev);
+ }
+
ret = qpnp_tm_init(chip);
if (ret < 0) {
dev_err(&pdev->dev, "init failed\n");
@@ -313,12 +440,7 @@ static int qpnp_tm_probe(struct platform_device *pdev)
if (ret < 0)
return ret;
- chip->tz_dev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, chip,
- &qpnp_tm_sensor_ops);
- if (IS_ERR(chip->tz_dev)) {
- dev_err(&pdev->dev, "failed to register sensor\n");
- return PTR_ERR(chip->tz_dev);
- }
+ thermal_zone_device_update(chip->tz_dev, THERMAL_EVENT_UNSPECIFIED);
return 0;
}
diff --git a/drivers/thermal/qcom/tsens-8916.c b/drivers/thermal/qcom/tsens-8916.c
index fdf561b8b81d..c6dd620ac029 100644
--- a/drivers/thermal/qcom/tsens-8916.c
+++ b/drivers/thermal/qcom/tsens-8916.c
@@ -1,15 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
*/
#include <linux/platform_device.h>
@@ -109,5 +100,6 @@ static const struct tsens_ops ops_8916 = {
const struct tsens_data data_8916 = {
.num_sensors = 5,
.ops = &ops_8916,
+ .reg_offsets = { [SROT_CTRL_OFFSET] = 0x0 },
.hw_ids = (unsigned int []){0, 1, 2, 4, 5 },
};
diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
index 0451277d3a8f..0f0adb302a7b 100644
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -1,15 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
*/
#include <linux/platform_device.h>
@@ -69,7 +60,7 @@ static int suspend_8960(struct tsens_device *tmdev)
{
int ret;
unsigned int mask;
- struct regmap *map = tmdev->map;
+ struct regmap *map = tmdev->tm_map;
ret = regmap_read(map, THRESHOLD_ADDR, &tmdev->ctx.threshold);
if (ret)
@@ -94,7 +85,7 @@ static int suspend_8960(struct tsens_device *tmdev)
static int resume_8960(struct tsens_device *tmdev)
{
int ret;
- struct regmap *map = tmdev->map;
+ struct regmap *map = tmdev->tm_map;
ret = regmap_update_bits(map, CNTL_ADDR, SW_RST, SW_RST);
if (ret)
@@ -126,12 +117,12 @@ static int enable_8960(struct tsens_device *tmdev, int id)
int ret;
u32 reg, mask;
- ret = regmap_read(tmdev->map, CNTL_ADDR, &reg);
+ ret = regmap_read(tmdev->tm_map, CNTL_ADDR, &reg);
if (ret)
return ret;
mask = BIT(id + SENSOR0_SHIFT);
- ret = regmap_write(tmdev->map, CNTL_ADDR, reg | SW_RST);
+ ret = regmap_write(tmdev->tm_map, CNTL_ADDR, reg | SW_RST);
if (ret)
return ret;
@@ -140,7 +131,7 @@ static int enable_8960(struct tsens_device *tmdev, int id)
else
reg |= mask | SLP_CLK_ENA_8660 | EN;
- ret = regmap_write(tmdev->map, CNTL_ADDR, reg);
+ ret = regmap_write(tmdev->tm_map, CNTL_ADDR, reg);
if (ret)
return ret;
@@ -157,7 +148,7 @@ static void disable_8960(struct tsens_device *tmdev)
mask <<= SENSOR0_SHIFT;
mask |= EN;
- ret = regmap_read(tmdev->map, CNTL_ADDR, &reg_cntl);
+ ret = regmap_read(tmdev->tm_map, CNTL_ADDR, &reg_cntl);
if (ret)
return;
@@ -168,7 +159,7 @@ static void disable_8960(struct tsens_device *tmdev)
else
reg_cntl &= ~SLP_CLK_ENA_8660;
- regmap_write(tmdev->map, CNTL_ADDR, reg_cntl);
+ regmap_write(tmdev->tm_map, CNTL_ADDR, reg_cntl);
}
static int init_8960(struct tsens_device *tmdev)
@@ -176,8 +167,8 @@ static int init_8960(struct tsens_device *tmdev)
int ret, i;
u32 reg_cntl;
- tmdev->map = dev_get_regmap(tmdev->dev, NULL);
- if (!tmdev->map)
+ tmdev->tm_map = dev_get_regmap(tmdev->dev, NULL);
+ if (!tmdev->tm_map)
return -ENODEV;
/*
@@ -193,14 +184,14 @@ static int init_8960(struct tsens_device *tmdev)
}
reg_cntl = SW_RST;
- ret = regmap_update_bits(tmdev->map, CNTL_ADDR, SW_RST, reg_cntl);
+ ret = regmap_update_bits(tmdev->tm_map, CNTL_ADDR, SW_RST, reg_cntl);
if (ret)
return ret;
if (tmdev->num_sensors > 1) {
reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18);
reg_cntl &= ~SW_RST;
- ret = regmap_update_bits(tmdev->map, CONFIG_ADDR,
+ ret = regmap_update_bits(tmdev->tm_map, CONFIG_ADDR,
CONFIG_MASK, CONFIG);
} else {
reg_cntl |= SLP_CLK_ENA_8660 | (MEASURE_PERIOD << 16);
@@ -209,12 +200,12 @@ static int init_8960(struct tsens_device *tmdev)
}
reg_cntl |= GENMASK(tmdev->num_sensors - 1, 0) << SENSOR0_SHIFT;
- ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl);
+ ret = regmap_write(tmdev->tm_map, CNTL_ADDR, reg_cntl);
if (ret)
return ret;
reg_cntl |= EN;
- ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl);
+ ret = regmap_write(tmdev->tm_map, CNTL_ADDR, reg_cntl);
if (ret)
return ret;
@@ -261,12 +252,12 @@ static int get_temp_8960(struct tsens_device *tmdev, int id, int *temp)
timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
do {
- ret = regmap_read(tmdev->map, INT_STATUS_ADDR, &trdy);
+ ret = regmap_read(tmdev->tm_map, INT_STATUS_ADDR, &trdy);
if (ret)
return ret;
if (!(trdy & TRDY_MASK))
continue;
- ret = regmap_read(tmdev->map, s->status, &code);
+ ret = regmap_read(tmdev->tm_map, s->status, &code);
if (ret)
return ret;
*temp = code_to_mdegC(code, s);
diff --git a/drivers/thermal/qcom/tsens-8974.c b/drivers/thermal/qcom/tsens-8974.c
index 9baf77e8cbe3..3d3fda3d731b 100644
--- a/drivers/thermal/qcom/tsens-8974.c
+++ b/drivers/thermal/qcom/tsens-8974.c
@@ -1,15 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
*/
#include <linux/platform_device.h>
@@ -241,4 +232,5 @@ static const struct tsens_ops ops_8974 = {
const struct tsens_data data_8974 = {
.num_sensors = 11,
.ops = &ops_8974,
+ .reg_offsets = { [SROT_CTRL_OFFSET] = 0x0 },
};
diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
index 6207d8d92351..3be4be2e0465 100644
--- a/drivers/thermal/qcom/tsens-common.c
+++ b/drivers/thermal/qcom/tsens-common.c
@@ -1,15 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
*/
#include <linux/err.h>
@@ -21,7 +12,11 @@
#include <linux/regmap.h>
#include "tsens.h"
-#define S0_ST_ADDR 0x1030
+/* SROT */
+#define TSENS_EN BIT(0)
+
+/* TM */
+#define STATUS_OFFSET 0x30
#define SN_ADDR_OFFSET 0x4
#define SN_ST_TEMP_MASK 0x3ff
#define CAL_DEGC_PT1 30
@@ -107,8 +102,8 @@ int get_temp_common(struct tsens_device *tmdev, int id, int *temp)
unsigned int status_reg;
int last_temp = 0, ret;
- status_reg = S0_ST_ADDR + s->hw_id * SN_ADDR_OFFSET;
- ret = regmap_read(tmdev->map, status_reg, &code);
+ status_reg = tmdev->tm_offset + STATUS_OFFSET + s->hw_id * SN_ADDR_OFFSET;
+ ret = regmap_read(tmdev->tm_map, status_reg, &code);
if (ret)
return ret;
last_temp = code & SN_ST_TEMP_MASK;
@@ -126,29 +121,52 @@ static const struct regmap_config tsens_config = {
int __init init_common(struct tsens_device *tmdev)
{
- void __iomem *base;
+ void __iomem *tm_base, *srot_base;
struct resource *res;
+ u32 code;
+ int ret;
struct platform_device *op = of_find_device_by_node(tmdev->dev->of_node);
+ u16 ctrl_offset = tmdev->reg_offsets[SROT_CTRL_OFFSET];
if (!op)
return -EINVAL;
- /* The driver only uses the TM register address space for now */
if (op->num_resources > 1) {
+ /* DT with separate SROT and TM address space */
tmdev->tm_offset = 0;
+ res = platform_get_resource(op, IORESOURCE_MEM, 1);
+ srot_base = devm_ioremap_resource(&op->dev, res);
+ if (IS_ERR(srot_base))
+ return PTR_ERR(srot_base);
+
+ tmdev->srot_map = devm_regmap_init_mmio(tmdev->dev,
+ srot_base, &tsens_config);
+ if (IS_ERR(tmdev->srot_map))
+ return PTR_ERR(tmdev->srot_map);
+
} else {
/* old DTs where SROT and TM were in a contiguous 2K block */
tmdev->tm_offset = 0x1000;
}
res = platform_get_resource(op, IORESOURCE_MEM, 0);
- base = devm_ioremap_resource(&op->dev, res);
- if (IS_ERR(base))
- return PTR_ERR(base);
-
- tmdev->map = devm_regmap_init_mmio(tmdev->dev, base, &tsens_config);
- if (IS_ERR(tmdev->map))
- return PTR_ERR(tmdev->map);
+ tm_base = devm_ioremap_resource(&op->dev, res);
+ if (IS_ERR(tm_base))
+ return PTR_ERR(tm_base);
+
+ tmdev->tm_map = devm_regmap_init_mmio(tmdev->dev, tm_base, &tsens_config);
+ if (IS_ERR(tmdev->tm_map))
+ return PTR_ERR(tmdev->tm_map);
+
+ if (tmdev->srot_map) {
+ ret = regmap_read(tmdev->srot_map, ctrl_offset, &code);
+ if (ret)
+ return ret;
+ if (!(code & TSENS_EN)) {
+ dev_err(tmdev->dev, "tsens device is not enabled\n");
+ return -ENODEV;
+ }
+ }
return 0;
}
diff --git a/drivers/thermal/qcom/tsens-v2.c b/drivers/thermal/qcom/tsens-v2.c
index 44da02f594ac..381a212872bf 100644
--- a/drivers/thermal/qcom/tsens-v2.c
+++ b/drivers/thermal/qcom/tsens-v2.c
@@ -21,7 +21,7 @@ static int get_temp_tsens_v2(struct tsens_device *tmdev, int id, int *temp)
int ret;
status_reg = tmdev->tm_offset + STATUS_OFFSET + s->hw_id * 4;
- ret = regmap_read(tmdev->map, status_reg, &code);
+ ret = regmap_read(tmdev->tm_map, status_reg, &code);
if (ret)
return ret;
last_temp = code & LAST_TEMP_MASK;
@@ -29,7 +29,7 @@ static int get_temp_tsens_v2(struct tsens_device *tmdev, int id, int *temp)
goto done;
/* Try a second time */
- ret = regmap_read(tmdev->map, status_reg, &code);
+ ret = regmap_read(tmdev->tm_map, status_reg, &code);
if (ret)
return ret;
if (code & STATUS_VALID_BIT) {
@@ -40,7 +40,7 @@ static int get_temp_tsens_v2(struct tsens_device *tmdev, int id, int *temp)
}
/* Try a third/last time */
- ret = regmap_read(tmdev->map, status_reg, &code);
+ ret = regmap_read(tmdev->tm_map, status_reg, &code);
if (ret)
return ret;
if (code & STATUS_VALID_BIT) {
@@ -68,10 +68,12 @@ static const struct tsens_ops ops_generic_v2 = {
const struct tsens_data data_tsens_v2 = {
.ops = &ops_generic_v2,
+ .reg_offsets = { [SROT_CTRL_OFFSET] = 0x4 },
};
/* Kept around for backward compatibility with old msm8996.dtsi */
const struct tsens_data data_8996 = {
.num_sensors = 13,
.ops = &ops_generic_v2,
+ .reg_offsets = { [SROT_CTRL_OFFSET] = 0x4 },
};
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index a2c9bfae3d86..f1ec9bbe4717 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -1,15 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
*/
#include <linux/err.h>
@@ -89,11 +80,6 @@ static int tsens_register(struct tsens_device *tmdev)
{
int i;
struct thermal_zone_device *tzd;
- u32 *hw_id, n = tmdev->num_sensors;
-
- hw_id = devm_kcalloc(tmdev->dev, n, sizeof(u32), GFP_KERNEL);
- if (!hw_id)
- return -ENOMEM;
for (i = 0; i < tmdev->num_sensors; i++) {
tmdev->sensor[i].tmdev = tmdev;
@@ -158,6 +144,9 @@ static int tsens_probe(struct platform_device *pdev)
else
tmdev->sensor[i].hw_id = i;
}
+ for (i = 0; i < REG_ARRAY_SIZE; i++) {
+ tmdev->reg_offsets[i] = data->reg_offsets[i];
+ }
if (!tmdev->ops || !tmdev->ops->init || !tmdev->ops->get_temp)
return -EINVAL;
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index 14331eb45a86..7b7feee5dc46 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -1,15 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
+
#ifndef __QCOM_TSENS_H__
#define __QCOM_TSENS_H__
@@ -55,15 +48,23 @@ struct tsens_ops {
int (*get_trend)(struct tsens_device *, int, enum thermal_trend *);
};
+enum reg_list {
+ SROT_CTRL_OFFSET,
+
+ REG_ARRAY_SIZE,
+};
+
/**
* struct tsens_data - tsens instance specific data
* @num_sensors: Max number of sensors supported by platform
* @ops: operations the tsens instance supports
* @hw_ids: Subset of sensors ids supported by platform, if not the first n
+ * @reg_offsets: Register offsets for commonly used registers
*/
struct tsens_data {
const u32 num_sensors;
const struct tsens_ops *ops;
+ const u16 reg_offsets[REG_ARRAY_SIZE];
unsigned int *hw_ids;
};
@@ -76,8 +77,10 @@ struct tsens_context {
struct tsens_device {
struct device *dev;
u32 num_sensors;
- struct regmap *map;
+ struct regmap *tm_map;
+ struct regmap *srot_map;
u32 tm_offset;
+ u16 reg_offsets[REG_ARRAY_SIZE];
struct tsens_context ctx;
const struct tsens_ops *ops;
struct tsens_sensor sensor[0];
diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
index 450ed66edf58..18c711b19514 100644
--- a/drivers/thermal/qoriq_thermal.c
+++ b/drivers/thermal/qoriq_thermal.c
@@ -119,8 +119,8 @@ static int qoriq_tmu_get_sensor_id(void)
if (sensor_specs.args_count >= 1) {
id = sensor_specs.args[0];
WARN(sensor_specs.args_count > 1,
- "%s: too many cells in sensor specifier %d\n",
- sensor_specs.np->name, sensor_specs.args_count);
+ "%pOFn: too many cells in sensor specifier %d\n",
+ sensor_specs.np, sensor_specs.args_count);
} else {
id = 0;
}
@@ -294,6 +294,7 @@ static SIMPLE_DEV_PM_OPS(qoriq_tmu_pm_ops,
static const struct of_device_id qoriq_tmu_match[] = {
{ .compatible = "fsl,qoriq-tmu", },
+ { .compatible = "fsl,imx8mq-tmu", },
{},
};
MODULE_DEVICE_TABLE(of, qoriq_tmu_match);
diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c
index 7aed5337bdd3..75786cc8e2f9 100644
--- a/drivers/thermal/rcar_gen3_thermal.c
+++ b/drivers/thermal/rcar_gen3_thermal.c
@@ -318,9 +318,11 @@ static void rcar_gen3_thermal_init(struct rcar_gen3_thermal_tsc *tsc)
}
static const struct of_device_id rcar_gen3_thermal_dt_ids[] = {
+ { .compatible = "renesas,r8a774a1-thermal", },
{ .compatible = "renesas,r8a7795-thermal", },
{ .compatible = "renesas,r8a7796-thermal", },
{ .compatible = "renesas,r8a77965-thermal", },
+ { .compatible = "renesas,r8a77980-thermal", },
{},
};
MODULE_DEVICE_TABLE(of, rcar_gen3_thermal_dt_ids);
diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 78f932822d38..8014a207d8d9 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -113,6 +113,10 @@ static const struct of_device_id rcar_thermal_dt_ids[] = {
.data = &rcar_gen2_thermal,
},
{
+ .compatible = "renesas,thermal-r8a77970",
+ .data = &rcar_gen3_thermal,
+ },
+ {
.compatible = "renesas,thermal-r8a77995",
.data = &rcar_gen3_thermal,
},
@@ -434,8 +438,8 @@ static irqreturn_t rcar_thermal_irq(int irq, void *data)
rcar_thermal_for_each_priv(priv, common) {
if (rcar_thermal_had_changed(priv, status)) {
rcar_thermal_irq_disable(priv);
- schedule_delayed_work(&priv->work,
- msecs_to_jiffies(300));
+ queue_delayed_work(system_freezable_wq, &priv->work,
+ msecs_to_jiffies(300));
}
}
@@ -453,6 +457,7 @@ static int rcar_thermal_remove(struct platform_device *pdev)
rcar_thermal_for_each_priv(priv, common) {
rcar_thermal_irq_disable(priv);
+ cancel_delayed_work_sync(&priv->work);
if (priv->chip->use_of_thermal)
thermal_remove_hwmon_sysfs(priv->zone);
else
@@ -492,7 +497,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
pm_runtime_get_sync(dev);
for (i = 0; i < chip->nirqs; i++) {
- irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, i);
if (!irq)
continue;
if (!common->base) {
diff --git a/drivers/thermal/st/Kconfig b/drivers/thermal/st/Kconfig
index 490fdbe22eea..b80f9a9e4f8f 100644
--- a/drivers/thermal/st/Kconfig
+++ b/drivers/thermal/st/Kconfig
@@ -1,3 +1,7 @@
+#
+# STMicroelectronics thermal drivers configuration
+#
+
config ST_THERMAL
tristate "Thermal sensors on STMicroelectronics STi series of SoCs"
help
@@ -10,3 +14,13 @@ config ST_THERMAL_SYSCFG
config ST_THERMAL_MEMMAP
select ST_THERMAL
tristate "STi series memory mapped access based thermal sensors"
+
+config STM32_THERMAL
+ tristate "Thermal framework support on STMicroelectronics STM32 series of SoCs"
+ depends on MACH_STM32MP157
+ default y
+ help
+ Support for thermal framework on STMicroelectronics STM32 series of
+ SoCs. This thermal driver allows to access to general thermal framework
+ functionalities and to acces to SoC sensor functionalities. This
+ configuration is fully dependent of MACH_STM32MP157.
diff --git a/drivers/thermal/st/Makefile b/drivers/thermal/st/Makefile
index b38878977bd8..b2b9e9b96296 100644
--- a/drivers/thermal/st/Makefile
+++ b/drivers/thermal/st/Makefile
@@ -1,3 +1,4 @@
obj-$(CONFIG_ST_THERMAL) := st_thermal.o
obj-$(CONFIG_ST_THERMAL_SYSCFG) += st_thermal_syscfg.o
obj-$(CONFIG_ST_THERMAL_MEMMAP) += st_thermal_memmap.o
+obj-$(CONFIG_STM32_THERMAL) := stm_thermal.o \ No newline at end of file
diff --git a/drivers/thermal/st/stm_thermal.c b/drivers/thermal/st/stm_thermal.c
new file mode 100644
index 000000000000..47623da0f91b
--- /dev/null
+++ b/drivers/thermal/st/stm_thermal.c
@@ -0,0 +1,760 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
+ * Author: David Hernandez Sanchez <david.hernandezsanchez@st.com> for
+ * STMicroelectronics.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+#include "../thermal_core.h"
+#include "../thermal_hwmon.h"
+
+/* DTS register offsets */
+#define DTS_CFGR1_OFFSET 0x0
+#define DTS_T0VALR1_OFFSET 0x8
+#define DTS_RAMPVALR_OFFSET 0X10
+#define DTS_ITR1_OFFSET 0x14
+#define DTS_DR_OFFSET 0x1C
+#define DTS_SR_OFFSET 0x20
+#define DTS_ITENR_OFFSET 0x24
+#define DTS_CIFR_OFFSET 0x28
+
+/* DTS_CFGR1 register mask definitions */
+#define HSREF_CLK_DIV_MASK GENMASK(30, 24)
+#define TS1_SMP_TIME_MASK GENMASK(19, 16)
+#define TS1_INTRIG_SEL_MASK GENMASK(11, 8)
+
+/* DTS_T0VALR1 register mask definitions */
+#define TS1_T0_MASK GENMASK(17, 16)
+#define TS1_FMT0_MASK GENMASK(15, 0)
+
+/* DTS_RAMPVALR register mask definitions */
+#define TS1_RAMP_COEFF_MASK GENMASK(15, 0)
+
+/* DTS_ITR1 register mask definitions */
+#define TS1_HITTHD_MASK GENMASK(31, 16)
+#define TS1_LITTHD_MASK GENMASK(15, 0)
+
+/* DTS_DR register mask definitions */
+#define TS1_MFREQ_MASK GENMASK(15, 0)
+
+/* Less significant bit position definitions */
+#define TS1_T0_POS 16
+#define TS1_SMP_TIME_POS 16
+#define TS1_HITTHD_POS 16
+#define HSREF_CLK_DIV_POS 24
+
+/* DTS_CFGR1 bit definitions */
+#define TS1_EN BIT(0)
+#define TS1_START BIT(4)
+#define REFCLK_SEL BIT(20)
+#define REFCLK_LSE REFCLK_SEL
+#define Q_MEAS_OPT BIT(21)
+#define CALIBRATION_CONTROL Q_MEAS_OPT
+
+/* DTS_SR bit definitions */
+#define TS_RDY BIT(15)
+/* Bit definitions below are common for DTS_SR, DTS_ITENR and DTS_CIFR */
+#define HIGH_THRESHOLD BIT(2)
+#define LOW_THRESHOLD BIT(1)
+
+/* Constants */
+#define ADJUST 100
+#define ONE_MHZ 1000000
+#define POLL_TIMEOUT 5000
+#define STARTUP_TIME 40
+#define TS1_T0_VAL0 30
+#define TS1_T0_VAL1 130
+#define NO_HW_TRIG 0
+
+/* The Thermal Framework expects millidegrees */
+#define mcelsius(temp) ((temp) * 1000)
+
+/* The Sensor expects oC degrees */
+#define celsius(temp) ((temp) / 1000)
+
+struct stm_thermal_sensor {
+ struct device *dev;
+ struct thermal_zone_device *th_dev;
+ enum thermal_device_mode mode;
+ struct clk *clk;
+ int high_temp;
+ int low_temp;
+ int temp_critical;
+ int temp_passive;
+ unsigned int low_temp_enabled;
+ int num_trips;
+ int irq;
+ unsigned int irq_enabled;
+ void __iomem *base;
+ int t0, fmt0, ramp_coeff;
+};
+
+static irqreturn_t stm_thermal_alarm_irq(int irq, void *sdata)
+{
+ struct stm_thermal_sensor *sensor = sdata;
+
+ disable_irq_nosync(irq);
+ sensor->irq_enabled = false;
+
+ return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t stm_thermal_alarm_irq_thread(int irq, void *sdata)
+{
+ u32 value;
+ struct stm_thermal_sensor *sensor = sdata;
+
+ /* read IT reason in SR and clear flags */
+ value = readl_relaxed(sensor->base + DTS_SR_OFFSET);
+
+ if ((value & LOW_THRESHOLD) == LOW_THRESHOLD)
+ writel_relaxed(LOW_THRESHOLD, sensor->base + DTS_CIFR_OFFSET);
+
+ if ((value & HIGH_THRESHOLD) == HIGH_THRESHOLD)
+ writel_relaxed(HIGH_THRESHOLD, sensor->base + DTS_CIFR_OFFSET);
+
+ thermal_zone_device_update(sensor->th_dev, THERMAL_EVENT_UNSPECIFIED);
+
+ return IRQ_HANDLED;
+}
+
+static int stm_sensor_power_on(struct stm_thermal_sensor *sensor)
+{
+ int ret;
+ u32 value;
+
+ /* Enable sensor */
+ value = readl_relaxed(sensor->base + DTS_CFGR1_OFFSET);
+ value |= TS1_EN;
+ writel_relaxed(value, sensor->base + DTS_CFGR1_OFFSET);
+
+ /*
+ * The DTS block can be enabled by setting TSx_EN bit in
+ * DTS_CFGRx register. It requires a startup time of
+ * 40μs. Use 5 ms as arbitrary timeout.
+ */
+ ret = readl_poll_timeout(sensor->base + DTS_SR_OFFSET,
+ value, (value & TS_RDY),
+ STARTUP_TIME, POLL_TIMEOUT);
+ if (ret)
+ return ret;
+
+ /* Start continuous measuring */
+ value = readl_relaxed(sensor->base +
+ DTS_CFGR1_OFFSET);
+ value |= TS1_START;
+ writel_relaxed(value, sensor->base +
+ DTS_CFGR1_OFFSET);
+
+ return 0;
+}
+
+static int stm_sensor_power_off(struct stm_thermal_sensor *sensor)
+{
+ u32 value;
+
+ /* Stop measuring */
+ value = readl_relaxed(sensor->base + DTS_CFGR1_OFFSET);
+ value &= ~TS1_START;
+ writel_relaxed(value, sensor->base + DTS_CFGR1_OFFSET);
+
+ /* Ensure stop is taken into account */
+ usleep_range(STARTUP_TIME, POLL_TIMEOUT);
+
+ /* Disable sensor */
+ value = readl_relaxed(sensor->base + DTS_CFGR1_OFFSET);
+ value &= ~TS1_EN;
+ writel_relaxed(value, sensor->base + DTS_CFGR1_OFFSET);
+
+ /* Ensure disable is taken into account */
+ return readl_poll_timeout(sensor->base + DTS_SR_OFFSET, value,
+ !(value & TS_RDY),
+ STARTUP_TIME, POLL_TIMEOUT);
+}
+
+static int stm_thermal_calibration(struct stm_thermal_sensor *sensor)
+{
+ u32 value, clk_freq;
+ u32 prescaler;
+
+ /* Figure out prescaler value for PCLK during calibration */
+ clk_freq = clk_get_rate(sensor->clk);
+ if (!clk_freq)
+ return -EINVAL;
+
+ prescaler = 0;
+ clk_freq /= ONE_MHZ;
+ if (clk_freq) {
+ while (prescaler <= clk_freq)
+ prescaler++;
+ }
+
+ value = readl_relaxed(sensor->base + DTS_CFGR1_OFFSET);
+
+ /* Clear prescaler */
+ value &= ~HSREF_CLK_DIV_MASK;
+
+ /* Set prescaler. pclk_freq/prescaler < 1MHz */
+ value |= (prescaler << HSREF_CLK_DIV_POS);
+
+ /* Select PCLK as reference clock */
+ value &= ~REFCLK_SEL;
+
+ /* Set maximal sampling time for better precision */
+ value |= TS1_SMP_TIME_MASK;
+
+ /* Measure with calibration */
+ value &= ~CALIBRATION_CONTROL;
+
+ /* select trigger */
+ value &= ~TS1_INTRIG_SEL_MASK;
+ value |= NO_HW_TRIG;
+
+ writel_relaxed(value, sensor->base + DTS_CFGR1_OFFSET);
+
+ return 0;
+}
+
+/* Fill in DTS structure with factory sensor values */
+static int stm_thermal_read_factory_settings(struct stm_thermal_sensor *sensor)
+{
+ /* Retrieve engineering calibration temperature */
+ sensor->t0 = readl_relaxed(sensor->base + DTS_T0VALR1_OFFSET) &
+ TS1_T0_MASK;
+ if (!sensor->t0)
+ sensor->t0 = TS1_T0_VAL0;
+ else
+ sensor->t0 = TS1_T0_VAL1;
+
+ /* Retrieve fmt0 and put it on Hz */
+ sensor->fmt0 = ADJUST * readl_relaxed(sensor->base + DTS_T0VALR1_OFFSET)
+ & TS1_FMT0_MASK;
+
+ /* Retrieve ramp coefficient */
+ sensor->ramp_coeff = readl_relaxed(sensor->base + DTS_RAMPVALR_OFFSET) &
+ TS1_RAMP_COEFF_MASK;
+
+ if (!sensor->fmt0 || !sensor->ramp_coeff) {
+ dev_err(sensor->dev, "%s: wrong setting\n", __func__);
+ return -EINVAL;
+ }
+
+ dev_dbg(sensor->dev, "%s: T0 = %doC, FMT0 = %dHz, RAMP_COEFF = %dHz/oC",
+ __func__, sensor->t0, sensor->fmt0, sensor->ramp_coeff);
+
+ return 0;
+}
+
+static int stm_thermal_calculate_threshold(struct stm_thermal_sensor *sensor,
+ int temp, u32 *th)
+{
+ int freqM;
+ u32 sampling_time;
+
+ /* Retrieve the number of periods to sample */
+ sampling_time = (readl_relaxed(sensor->base + DTS_CFGR1_OFFSET) &
+ TS1_SMP_TIME_MASK) >> TS1_SMP_TIME_POS;
+
+ /* Figure out the CLK_PTAT frequency for a given temperature */
+ freqM = ((temp - sensor->t0) * sensor->ramp_coeff)
+ + sensor->fmt0;
+
+ dev_dbg(sensor->dev, "%s: freqM for threshold = %d Hz",
+ __func__, freqM);
+
+ /* Figure out the threshold sample number */
+ *th = clk_get_rate(sensor->clk);
+ if (!*th)
+ return -EINVAL;
+
+ *th = *th / freqM;
+
+ *th *= sampling_time;
+
+ return 0;
+}
+
+static int stm_thermal_set_threshold(struct stm_thermal_sensor *sensor)
+{
+ u32 value, th;
+ int ret;
+
+ value = readl_relaxed(sensor->base + DTS_ITR1_OFFSET);
+
+ /* Erase threshold content */
+ value &= ~(TS1_LITTHD_MASK | TS1_HITTHD_MASK);
+
+ /* Retrieve the sample threshold number th for a given temperature */
+ ret = stm_thermal_calculate_threshold(sensor, sensor->high_temp, &th);
+ if (ret)
+ return ret;
+
+ value |= th & TS1_LITTHD_MASK;
+
+ if (sensor->low_temp_enabled) {
+ /* Retrieve the sample threshold */
+ ret = stm_thermal_calculate_threshold(sensor, sensor->low_temp,
+ &th);
+ if (ret)
+ return ret;
+
+ value |= (TS1_HITTHD_MASK & (th << TS1_HITTHD_POS));
+ }
+
+ /* Write value on the Low interrupt threshold */
+ writel_relaxed(value, sensor->base + DTS_ITR1_OFFSET);
+
+ return 0;
+}
+
+/* Disable temperature interrupt */
+static int stm_disable_irq(struct stm_thermal_sensor *sensor)
+{
+ u32 value;
+
+ /* Disable IT generation for low and high thresholds */
+ value = readl_relaxed(sensor->base + DTS_ITENR_OFFSET);
+ writel_relaxed(value & ~(LOW_THRESHOLD | HIGH_THRESHOLD),
+ sensor->base + DTS_ITENR_OFFSET);
+
+ dev_dbg(sensor->dev, "%s: IT disabled on sensor side", __func__);
+
+ return 0;
+}
+
+/* Enable temperature interrupt */
+static int stm_enable_irq(struct stm_thermal_sensor *sensor)
+{
+ u32 value;
+
+ /*
+ * Code below enables High temperature threshold using a low threshold
+ * sampling value
+ */
+
+ /* Make sure LOW_THRESHOLD IT is clear before enabling */
+ writel_relaxed(LOW_THRESHOLD, sensor->base + DTS_CIFR_OFFSET);
+
+ /* Enable IT generation for low threshold */
+ value = readl_relaxed(sensor->base + DTS_ITENR_OFFSET);
+ value |= LOW_THRESHOLD;
+
+ /* Enable the low temperature threshold if needed */
+ if (sensor->low_temp_enabled) {
+ /* Make sure HIGH_THRESHOLD IT is clear before enabling */
+ writel_relaxed(HIGH_THRESHOLD, sensor->base + DTS_CIFR_OFFSET);
+
+ /* Enable IT generation for high threshold */
+ value |= HIGH_THRESHOLD;
+ }
+
+ /* Enable thresholds */
+ writel_relaxed(value, sensor->base + DTS_ITENR_OFFSET);
+
+ dev_dbg(sensor->dev, "%s: IT enabled on sensor side", __func__);
+
+ return 0;
+}
+
+static int stm_thermal_update_threshold(struct stm_thermal_sensor *sensor)
+{
+ int ret;
+
+ sensor->mode = THERMAL_DEVICE_DISABLED;
+
+ ret = stm_sensor_power_off(sensor);
+ if (ret)
+ return ret;
+
+ ret = stm_disable_irq(sensor);
+ if (ret)
+ return ret;
+
+ ret = stm_thermal_set_threshold(sensor);
+ if (ret)
+ return ret;
+
+ ret = stm_enable_irq(sensor);
+ if (ret)
+ return ret;
+
+ ret = stm_sensor_power_on(sensor);
+ if (ret)
+ return ret;
+
+ sensor->mode = THERMAL_DEVICE_ENABLED;
+
+ return 0;
+}
+
+/* Callback to get temperature from HW */
+static int stm_thermal_get_temp(void *data, int *temp)
+{
+ struct stm_thermal_sensor *sensor = data;
+ u32 sampling_time;
+ int freqM, ret;
+
+ if (sensor->mode != THERMAL_DEVICE_ENABLED)
+ return -EAGAIN;
+
+ /* Retrieve the number of samples */
+ ret = readl_poll_timeout(sensor->base + DTS_DR_OFFSET, freqM,
+ (freqM & TS1_MFREQ_MASK), STARTUP_TIME,
+ POLL_TIMEOUT);
+
+ if (ret)
+ return ret;
+
+ if (!freqM)
+ return -ENODATA;
+
+ /* Retrieve the number of periods sampled */
+ sampling_time = (readl_relaxed(sensor->base + DTS_CFGR1_OFFSET) &
+ TS1_SMP_TIME_MASK) >> TS1_SMP_TIME_POS;
+
+ /* Figure out the number of samples per period */
+ freqM /= sampling_time;
+
+ /* Figure out the CLK_PTAT frequency */
+ freqM = clk_get_rate(sensor->clk) / freqM;
+ if (!freqM)
+ return -EINVAL;
+
+ dev_dbg(sensor->dev, "%s: freqM=%d\n", __func__, freqM);
+
+ /* Figure out the temperature in mili celsius */
+ *temp = mcelsius(sensor->t0 + ((freqM - sensor->fmt0) /
+ sensor->ramp_coeff));
+
+ dev_dbg(sensor->dev, "%s: temperature = %d millicelsius",
+ __func__, *temp);
+
+ /* Update thresholds */
+ if (sensor->num_trips > 1) {
+ /* Update alarm threshold value to next higher trip point */
+ if (sensor->high_temp == sensor->temp_passive &&
+ celsius(*temp) >= sensor->temp_passive) {
+ sensor->high_temp = sensor->temp_critical;
+ sensor->low_temp = sensor->temp_passive;
+ sensor->low_temp_enabled = true;
+ ret = stm_thermal_update_threshold(sensor);
+ if (ret)
+ return ret;
+ }
+
+ if (sensor->high_temp == sensor->temp_critical &&
+ celsius(*temp) < sensor->temp_passive) {
+ sensor->high_temp = sensor->temp_passive;
+ sensor->low_temp_enabled = false;
+ ret = stm_thermal_update_threshold(sensor);
+ if (ret)
+ return ret;
+ }
+
+ /*
+ * Re-enable alarm IRQ if temperature below critical
+ * temperature
+ */
+ if (!sensor->irq_enabled &&
+ (celsius(*temp) < sensor->temp_critical)) {
+ sensor->irq_enabled = true;
+ enable_irq(sensor->irq);
+ }
+ }
+
+ return 0;
+}
+
+/* Registers DTS irq to be visible by GIC */
+static int stm_register_irq(struct stm_thermal_sensor *sensor)
+{
+ struct device *dev = sensor->dev;
+ struct platform_device *pdev = to_platform_device(dev);
+ int ret;
+
+ sensor->irq = platform_get_irq(pdev, 0);
+ if (sensor->irq < 0) {
+ dev_err(dev, "%s: Unable to find IRQ\n", __func__);
+ return sensor->irq;
+ }
+
+ ret = devm_request_threaded_irq(dev, sensor->irq,
+ stm_thermal_alarm_irq,
+ stm_thermal_alarm_irq_thread,
+ IRQF_ONESHOT,
+ dev->driver->name, sensor);
+ if (ret) {
+ dev_err(dev, "%s: Failed to register IRQ %d\n", __func__,
+ sensor->irq);
+ return ret;
+ }
+
+ sensor->irq_enabled = true;
+
+ dev_dbg(dev, "%s: thermal IRQ registered", __func__);
+
+ return 0;
+}
+
+static int stm_thermal_sensor_off(struct stm_thermal_sensor *sensor)
+{
+ int ret;
+
+ ret = stm_sensor_power_off(sensor);
+ if (ret)
+ return ret;
+
+ clk_disable_unprepare(sensor->clk);
+
+ return 0;
+}
+
+static int stm_thermal_prepare(struct stm_thermal_sensor *sensor)
+{
+ int ret;
+ struct device *dev = sensor->dev;
+
+ ret = clk_prepare_enable(sensor->clk);
+ if (ret)
+ return ret;
+
+ ret = stm_thermal_calibration(sensor);
+ if (ret)
+ goto thermal_unprepare;
+
+ /* Set threshold(s) for IRQ */
+ ret = stm_thermal_set_threshold(sensor);
+ if (ret)
+ goto thermal_unprepare;
+
+ ret = stm_enable_irq(sensor);
+ if (ret)
+ goto thermal_unprepare;
+
+ ret = stm_sensor_power_on(sensor);
+ if (ret) {
+ dev_err(dev, "%s: failed to power on sensor\n", __func__);
+ goto irq_disable;
+ }
+
+ return 0;
+
+irq_disable:
+ stm_disable_irq(sensor);
+
+thermal_unprepare:
+ clk_disable_unprepare(sensor->clk);
+
+ return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int stm_thermal_suspend(struct device *dev)
+{
+ int ret;
+ struct platform_device *pdev = to_platform_device(dev);
+ struct stm_thermal_sensor *sensor = platform_get_drvdata(pdev);
+
+ ret = stm_thermal_sensor_off(sensor);
+ if (ret)
+ return ret;
+
+ sensor->mode = THERMAL_DEVICE_DISABLED;
+
+ return 0;
+}
+
+static int stm_thermal_resume(struct device *dev)
+{
+ int ret;
+ struct platform_device *pdev = to_platform_device(dev);
+ struct stm_thermal_sensor *sensor = platform_get_drvdata(pdev);
+
+ ret = stm_thermal_prepare(sensor);
+ if (ret)
+ return ret;
+
+ sensor->mode = THERMAL_DEVICE_ENABLED;
+
+ return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+SIMPLE_DEV_PM_OPS(stm_thermal_pm_ops, stm_thermal_suspend, stm_thermal_resume);
+
+static const struct thermal_zone_of_device_ops stm_tz_ops = {
+ .get_temp = stm_thermal_get_temp,
+};
+
+static const struct of_device_id stm_thermal_of_match[] = {
+ { .compatible = "st,stm32-thermal"},
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, stm_thermal_of_match);
+
+static int stm_thermal_probe(struct platform_device *pdev)
+{
+ struct stm_thermal_sensor *sensor;
+ struct resource *res;
+ const struct thermal_trip *trip;
+ void __iomem *base;
+ int ret, i;
+
+ if (!pdev->dev.of_node) {
+ dev_err(&pdev->dev, "%s: device tree node not found\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ sensor = devm_kzalloc(&pdev->dev, sizeof(*sensor), GFP_KERNEL);
+ if (!sensor)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, sensor);
+
+ sensor->dev = &pdev->dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ /* Populate sensor */
+ sensor->base = base;
+
+ ret = stm_thermal_read_factory_settings(sensor);
+ if (ret)
+ return ret;
+
+ sensor->clk = devm_clk_get(&pdev->dev, "pclk");
+ if (IS_ERR(sensor->clk)) {
+ dev_err(&pdev->dev, "%s: failed to fetch PCLK clock\n",
+ __func__);
+ return PTR_ERR(sensor->clk);
+ }
+
+ /* Register IRQ into GIC */
+ ret = stm_register_irq(sensor);
+ if (ret)
+ return ret;
+
+ sensor->th_dev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0,
+ sensor,
+ &stm_tz_ops);
+
+ if (IS_ERR(sensor->th_dev)) {
+ dev_err(&pdev->dev, "%s: thermal zone sensor registering KO\n",
+ __func__);
+ ret = PTR_ERR(sensor->th_dev);
+ return ret;
+ }
+
+ if (!sensor->th_dev->ops->get_crit_temp) {
+ /* Critical point must be provided */
+ ret = -EINVAL;
+ goto err_tz;
+ }
+
+ ret = sensor->th_dev->ops->get_crit_temp(sensor->th_dev,
+ &sensor->temp_critical);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Not able to read critical_temp: %d\n", ret);
+ goto err_tz;
+ }
+
+ sensor->temp_critical = celsius(sensor->temp_critical);
+
+ /* Set thresholds for IRQ */
+ sensor->high_temp = sensor->temp_critical;
+
+ trip = of_thermal_get_trip_points(sensor->th_dev);
+ sensor->num_trips = of_thermal_get_ntrips(sensor->th_dev);
+
+ /* Find out passive temperature if it exists */
+ for (i = (sensor->num_trips - 1); i >= 0; i--) {
+ if (trip[i].type == THERMAL_TRIP_PASSIVE) {
+ sensor->temp_passive = celsius(trip[i].temperature);
+ /* Update high temperature threshold */
+ sensor->high_temp = sensor->temp_passive;
+ }
+ }
+
+ /*
+ * Ensure low_temp_enabled flag is disabled.
+ * By disabling low_temp_enabled, low threshold IT will not be
+ * configured neither enabled because it is not needed as high
+ * threshold is set on the lowest temperature trip point after
+ * probe.
+ */
+ sensor->low_temp_enabled = false;
+
+ /* Configure and enable HW sensor */
+ ret = stm_thermal_prepare(sensor);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Not able to enable sensor: %d\n", ret);
+ goto err_tz;
+ }
+
+ /*
+ * Thermal_zone doesn't enable hwmon as default,
+ * enable it here
+ */
+ sensor->th_dev->tzp->no_hwmon = false;
+ ret = thermal_add_hwmon_sysfs(sensor->th_dev);
+ if (ret)
+ goto err_tz;
+
+ sensor->mode = THERMAL_DEVICE_ENABLED;
+
+ dev_info(&pdev->dev, "%s: Driver initialized successfully\n",
+ __func__);
+
+ return 0;
+
+err_tz:
+ thermal_zone_of_sensor_unregister(&pdev->dev, sensor->th_dev);
+ return ret;
+}
+
+static int stm_thermal_remove(struct platform_device *pdev)
+{
+ struct stm_thermal_sensor *sensor = platform_get_drvdata(pdev);
+
+ stm_thermal_sensor_off(sensor);
+ thermal_remove_hwmon_sysfs(sensor->th_dev);
+ thermal_zone_of_sensor_unregister(&pdev->dev, sensor->th_dev);
+
+ return 0;
+}
+
+static struct platform_driver stm_thermal_driver = {
+ .driver = {
+ .name = "stm_thermal",
+ .pm = &stm_thermal_pm_ops,
+ .of_match_table = stm_thermal_of_match,
+ },
+ .probe = stm_thermal_probe,
+ .remove = stm_thermal_remove,
+};
+module_platform_driver(stm_thermal_driver);
+
+MODULE_DESCRIPTION("STMicroelectronics STM32 Thermal Sensor Driver");
+MODULE_AUTHOR("David Hernandez Sanchez <david.hernandezsanchez@st.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:stm_thermal");