summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/scsi/megaraid/megaraid_mbox.c10
-rw-r--r--drivers/scsi/megaraid/megaraid_mm.c2
-rw-r--r--drivers/scsi/megaraid/megaraid_sas_fusion.h2
3 files changed, 7 insertions, 7 deletions
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index e6a1e0b38a19..515c9629e9fe 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -549,7 +549,7 @@ out_probe_one:
/**
* megaraid_detach_one - release framework resources and call LLD release routine
- * @pdev : handle for our PCI cofiguration space
+ * @pdev : handle for our PCI configuration space
*
* This routine is called during driver unload. We free all the allocated
* resources and call the corresponding LLD so that it can also release all
@@ -979,7 +979,7 @@ megaraid_fini_mbox(adapter_t *adapter)
* @adapter : soft state of the raid controller
*
* Allocate and align the shared mailbox. This maibox is used to issue
- * all the commands. For IO based controllers, the mailbox is also regsitered
+ * all the commands. For IO based controllers, the mailbox is also registered
* with the FW. Allocate memory for all commands as well.
* This is our big allocator.
*/
@@ -2027,7 +2027,7 @@ megaraid_mbox_prepare_pthru(adapter_t *adapter, scb_t *scb,
* @scb : scsi control block
* @scp : scsi command from the mid-layer
*
- * Prepare a command for the scsi physical devices. This rountine prepares
+ * Prepare a command for the scsi physical devices. This routine prepares
* commands for devices which can take extended CDBs (>10 bytes).
*/
static void
@@ -2586,7 +2586,7 @@ megaraid_abort_handler(struct scsi_cmnd *scp)
}
/**
- * megaraid_reset_handler - device reset hadler for mailbox based driver
+ * megaraid_reset_handler - device reset handler for mailbox based driver
* @scp : reference command
*
* Reset handler for the mailbox based controller. First try to find out if
@@ -3446,7 +3446,7 @@ megaraid_mbox_display_scb(adapter_t *adapter, scb_t *scb)
* megaraid_mbox_setup_device_map - manage device ids
* @adapter : Driver's soft state
*
- * Manange the device ids to have an appropriate mapping between the kernel
+ * Manage the device ids to have an appropriate mapping between the kernel
* scsi addresses and megaraid scsi and logical drive addresses. We export
* scsi devices on their actual addresses, whereas the logical drives are
* exported on a virtual scsi channel.
diff --git a/drivers/scsi/megaraid/megaraid_mm.c b/drivers/scsi/megaraid/megaraid_mm.c
index 25506c777381..dfffd0f37916 100644
--- a/drivers/scsi/megaraid/megaraid_mm.c
+++ b/drivers/scsi/megaraid/megaraid_mm.c
@@ -896,7 +896,7 @@ hinfo_to_cinfo(mraid_hba_info_t *hinfo, mcontroller_t *cinfo)
/**
* mraid_mm_register_adp - Registration routine for low level drivers
- * @lld_adp : Adapter objejct
+ * @lld_adp : Adapter object
*/
int
mraid_mm_register_adp(mraid_mmadp_t *lld_adp)
diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.h b/drivers/scsi/megaraid/megaraid_sas_fusion.h
index 12ff01cf6799..4eb84011cb07 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.h
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.h
@@ -88,7 +88,7 @@ enum MR_RAID_FLAGS_IO_SUB_TYPE {
#define MEGASAS_FUSION_IN_RESET 0
/*
- * Raid Context structure which describes MegaRAID specific IO Paramenters
+ * Raid Context structure which describes MegaRAID specific IO Parameters
* This resides at offset 0x60 where the SGL normally starts in MPT IO Frames
*/