diff options
42 files changed, 65 insertions, 65 deletions
diff --git a/drivers/staging/android/ion/ion_priv.h b/drivers/staging/android/ion/ion_priv.h index 18a5f93e13b7..52f1cd1a67ed 100644 --- a/drivers/staging/android/ion/ion_priv.h +++ b/drivers/staging/android/ion/ion_priv.h @@ -33,7 +33,7 @@ struct ion_buffer *ion_handle_buffer(struct ion_handle *handle); /** * struct ion_buffer - metadata for a particular buffer - * @ref: refernce count + * @ref: reference count * @node: node in the ion_device buffers tree * @dev: back pointer to the ion_device * @heap: back pointer to the heap the buffer came from @@ -46,7 +46,7 @@ struct ion_buffer *ion_handle_buffer(struct ion_handle *handle); * an ion_phys_addr_t (and someday a phys_addr_t) * @lock: protects the buffers cnt fields * @kmap_cnt: number of times the buffer is mapped to the kernel - * @vaddr: the kenrel mapping if kmap_cnt is not zero + * @vaddr: the kernel mapping if kmap_cnt is not zero * @dmap_cnt: number of times the buffer is mapped for dma * @sg_table: the sg table for the buffer if dmap_cnt is not zero * @pages: flat array of pages in the buffer -- used by fault @@ -266,7 +266,7 @@ void ion_heap_freelist_add(struct ion_heap *heap, struct ion_buffer *buffer); /** * ion_heap_freelist_drain - drain the deferred free list * @heap: the heap - * @size: ammount of memory to drain in bytes + * @size: amount of memory to drain in bytes * * Drains the indicated amount of memory from the deferred freelist immediately. * Returns the total amount freed. The total freed may be higher depending diff --git a/drivers/staging/android/uapi/ion.h b/drivers/staging/android/uapi/ion.h index 6aa495673370..68a14b4e21cb 100644 --- a/drivers/staging/android/uapi/ion.h +++ b/drivers/staging/android/uapi/ion.h @@ -179,7 +179,7 @@ struct ion_custom_data { * DOC: ION_IOC_SYNC - syncs a shared file descriptors to memory * * Deprecated in favor of using the dma_buf api's correctly (syncing - * will happend automatically when the buffer is mapped to a device). + * will happen automatically when the buffer is mapped to a device). * If necessary should be used after touching a cached buffer from the cpu, * this will make the buffer in memory coherent. */ diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c index 6f269cc35633..146ab009d5f7 100644 --- a/drivers/staging/comedi/comedi_fops.c +++ b/drivers/staging/comedi/comedi_fops.c @@ -1762,7 +1762,7 @@ cleanup: /* * COMEDI_CMDTEST ioctl - * asynchronous aquisition command testing + * asynchronous acquisition command testing * * arg: * pointer to comedi_cmd structure diff --git a/drivers/staging/dgnc/TODO b/drivers/staging/dgnc/TODO index 2b2c6ea03c61..0e0825bd70ae 100644 --- a/drivers/staging/dgnc/TODO +++ b/drivers/staging/dgnc/TODO @@ -1,9 +1,9 @@ * checkpatch fixes -* remove unecessary comments -* remove unecessary error messages. Example kzalloc() has its +* remove unnecessary comments +* remove unnecessary error messages. Example kzalloc() has its own error message. Adding an extra one is useless. * use goto statements for error handling when appropriate -* there is a lot of unecessary code in the driver. It was +* there is a lot of unnecessary code in the driver. It was originally a standalone driver. Remove uneeded code. Please send patches to Greg Kroah-Hartman <greg@kroah.com> and diff --git a/drivers/staging/dgnc/dgnc_neo.c b/drivers/staging/dgnc/dgnc_neo.c index f5a4d365115f..631240850bca 100644 --- a/drivers/staging/dgnc/dgnc_neo.c +++ b/drivers/staging/dgnc/dgnc_neo.c @@ -1203,7 +1203,7 @@ static void neo_copy_data_from_uart_to_queue(struct channel_t *ch) memcpy_fromio(ch->ch_rqueue + head, &ch->ch_neo_uart->txrxburst, n); /* - * Since RX_FIFO_DATA_ERROR was 0, we are guarenteed + * Since RX_FIFO_DATA_ERROR was 0, we are guaranteed * that all the data currently in the FIFO is free of * breaks and parity/frame/orun errors. */ diff --git a/drivers/staging/emxx_udc/emxx_udc.c b/drivers/staging/emxx_udc/emxx_udc.c index 2fd04e8129e4..163ca56a11ab 100644 --- a/drivers/staging/emxx_udc/emxx_udc.c +++ b/drivers/staging/emxx_udc/emxx_udc.c @@ -1223,7 +1223,7 @@ static int _nbu2ss_epn_in_transfer( } /*-------------------------------------------------------------*/ - /* Start tranfer */ + /* Start transfer */ iBufSize = req->req.length - req->req.actual; if (iBufSize > 0) result = _nbu2ss_epn_in_data(udc, ep, req, iBufSize); diff --git a/drivers/staging/fbtft/Kconfig b/drivers/staging/fbtft/Kconfig index 6cf0c58f538b..346f189d871a 100644 --- a/drivers/staging/fbtft/Kconfig +++ b/drivers/staging/fbtft/Kconfig @@ -12,7 +12,7 @@ config FB_TFT_AGM1264K_FL tristate "FB driver for the AGM1264K-FL LCD display" depends on FB_TFT help - Framebuffer support for the AGM1264K-FL LCD display (two Samsung KS0108 compatable chips) + Framebuffer support for the AGM1264K-FL LCD display (two Samsung KS0108 compatible chips) config FB_TFT_BD663474 tristate "FB driver for the BD663474 LCD Controller" diff --git a/drivers/staging/fwserial/dma_fifo.c b/drivers/staging/fwserial/dma_fifo.c index 027906249598..7a3347c3d02b 100644 --- a/drivers/staging/fwserial/dma_fifo.c +++ b/drivers/staging/fwserial/dma_fifo.c @@ -56,7 +56,7 @@ void dma_fifo_init(struct dma_fifo *fifo) * @size: 'apparent' size, in bytes, of fifo * @align: dma alignment to maintain (should be at least cpu cache alignment), * must be power of 2 - * @tx_limit: maximum # of bytes transmissable per dma (rounded down to + * @tx_limit: maximum # of bytes transmissible per dma (rounded down to * multiple of alignment, but at least align size) * @open_limit: maximum # of outstanding dma transactions allowed * @gfp_mask: get_free_pages mask, passed to kmalloc() diff --git a/drivers/staging/fwserial/fwserial.h b/drivers/staging/fwserial/fwserial.h index 98b853d4acbc..787aa4f3a41b 100644 --- a/drivers/staging/fwserial/fwserial.h +++ b/drivers/staging/fwserial/fwserial.h @@ -218,7 +218,7 @@ struct fwconsole_ops { * prevented with the IN_TX flag. Scheduled under lock to * limit scheduling when fifo has just been drained. * @tx_fifo: fifo used to store & block-up writes for dma to remote - * @max_payload: max bytes transmissable per dma (based on peer's max_payload) + * @max_payload: max bytes transmissible per dma (based on peer's max_payload) * @status_mask: UART_LSR_* bitmask significant to rx (based on termios) * @ignore_mask: UART_LSR_* bitmask of states to ignore (also based on termios) * @break_ctl: if set, port is 'sending break' to remote diff --git a/drivers/staging/iio/Documentation/device.txt b/drivers/staging/iio/Documentation/device.txt index 8be32e5a0af1..54ef0deed28f 100644 --- a/drivers/staging/iio/Documentation/device.txt +++ b/drivers/staging/iio/Documentation/device.txt @@ -52,7 +52,7 @@ Then fill in the following: * info->write_event_value: Write the value associated with on sensor event detectors. E.g. a threshold above which an interrupt occurs. Note that the - meaning of the value to be set is event type dependant. + meaning of the value to be set is event type dependent. - indio_dev->modes: Specify whether direct access and / or ring buffer access is supported. diff --git a/drivers/staging/iio/iio_simple_dummy.h b/drivers/staging/iio/iio_simple_dummy.h index 34989bf248a7..d86ccb76eb6d 100644 --- a/drivers/staging/iio/iio_simple_dummy.h +++ b/drivers/staging/iio/iio_simple_dummy.h @@ -25,7 +25,7 @@ struct iio_dummy_regs; * @accel_calibscale: cache for acceleration calibscale * @lock: lock to ensure state is consistent * @event_irq: irq number for event line (faked) - * @event_val: cache for event theshold value + * @event_val: cache for event threshold value * @event_en: cache of whether event is enabled */ struct iio_dummy_state { diff --git a/drivers/staging/lustre/TODO b/drivers/staging/lustre/TODO index 0512594b5199..f194417d0af7 100644 --- a/drivers/staging/lustre/TODO +++ b/drivers/staging/lustre/TODO @@ -1,6 +1,6 @@ * Possible remaining coding style fix. * Remove deadcode. -* Seperate client/server functionality. Functions only used by server can be +* Separate client/server functionality. Functions only used by server can be removed from client. * Clean up libcfs layer. Ideally we can remove include/linux/libcfs entirely. * Clean up CLIO layer. Lustre client readahead/writeback control needs to better diff --git a/drivers/staging/media/bcm2048/radio-bcm2048.c b/drivers/staging/media/bcm2048/radio-bcm2048.c index e9d0691b21d3..cf9128117a9e 100644 --- a/drivers/staging/media/bcm2048/radio-bcm2048.c +++ b/drivers/staging/media/bcm2048/radio-bcm2048.c @@ -217,7 +217,7 @@ #define BCM2048_FREQ_ERROR_FLOOR -20 #define BCM2048_FREQ_ERROR_ROOF 20 -/* -60 dB is reported as full signal strenght */ +/* -60 dB is reported as full signal strength */ #define BCM2048_RSSI_LEVEL_BASE -60 #define BCM2048_RSSI_LEVEL_ROOF -100 #define BCM2048_RSSI_LEVEL_ROOF_NEG 100 @@ -2468,7 +2468,7 @@ static int bcm2048_vidioc_g_tuner(struct file *file, void *priv, } else { /* * RSSI level -60 dB is defined to report full - * signal strenght + * signal strength */ rssi = bcm2048_get_fm_rssi(bdev); if (rssi >= BCM2048_RSSI_LEVEL_BASE) { diff --git a/drivers/staging/octeon-usb/octeon-hcd.c b/drivers/staging/octeon-usb/octeon-hcd.c index cdb0981be2e9..9bd73ea5a1fa 100644 --- a/drivers/staging/octeon-usb/octeon-hcd.c +++ b/drivers/staging/octeon-usb/octeon-hcd.c @@ -1239,7 +1239,7 @@ static int cvmx_usb_fill_tx_hw(struct cvmx_usb_state *usb, usb->index) ^ 4; int words = available; - /* Limit the amount of data to waht the SW fifo has */ + /* Limit the amount of data to what the SW fifo has */ if (fifo->entry[i].size <= available) { words = fifo->entry[i].size; fifo->tail++; @@ -1849,7 +1849,7 @@ static void cvmx_usb_start_channel(struct cvmx_usb_state *usb, int channel, transaction->xfersize = usbc_hctsiz.s.xfersize; transaction->pktcnt = usbc_hctsiz.s.pktcnt; } - /* Remeber when we start a split transaction */ + /* Remember when we start a split transaction */ if (cvmx_usb_pipe_needs_split(usb, pipe)) usb->active_split = transaction; USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), diff --git a/drivers/staging/octeon-usb/octeon-hcd.h b/drivers/staging/octeon-usb/octeon-hcd.h index 3e351ab7465a..70e7fa5e37d9 100644 --- a/drivers/staging/octeon-usb/octeon-hcd.h +++ b/drivers/staging/octeon-usb/octeon-hcd.h @@ -1693,7 +1693,7 @@ union cvmx_usbnx_usbp_ctl_status { * struct cvmx_usbnx_usbp_ctl_status_s * @txrisetune: HS Transmitter Rise/Fall Time Adjustment * @txvreftune: HS DC Voltage Level Adjustment - * @txfslstune: FS/LS Source Impedence Adjustment + * @txfslstune: FS/LS Source Impedance Adjustment * @txhsxvtune: Transmitter High-Speed Crossover Adjustment * @sqrxtune: Squelch Threshold Adjustment * @compdistune: Disconnect Threshold Adjustment diff --git a/drivers/staging/rtl8188eu/include/rtl8188e_hal.h b/drivers/staging/rtl8188eu/include/rtl8188e_hal.h index b8c42eed98c4..5015748a9f42 100644 --- a/drivers/staging/rtl8188eu/include/rtl8188e_hal.h +++ b/drivers/staging/rtl8188eu/include/rtl8188e_hal.h @@ -159,7 +159,7 @@ struct txpowerinfo24g { /* | 1byte|----8bytes----|1byte|--5bytes--| */ /* | | Reserved(14bytes) | */ -/* PG data exclude header, dummy 6 bytes frome CP test and reserved 1byte. */ +/* PG data exclude header, dummy 6 bytes from CP test and reserved 1byte. */ #define EFUSE_OOB_PROTECT_BYTES 15 #define HWSET_MAX_SIZE_88E 512 @@ -177,7 +177,7 @@ struct txpowerinfo24g { /* 9bytes + 1byt + 5bytes and pre 1byte. */ /* For worst case: */ /* | 2byte|----8bytes----|1byte|--7bytes--| 92D */ -/* PG data exclude header, dummy 7 bytes frome CP test and reserved 1byte. */ +/* PG data exclude header, dummy 7 bytes from CP test and reserved 1byte. */ #define EFUSE_OOB_PROTECT_BYTES_88E 18 #define EFUSE_PROTECT_BYTES_BANK_88E 16 diff --git a/drivers/staging/rtl8192u/r8192U_dm.c b/drivers/staging/rtl8192u/r8192U_dm.c index 12dd19e1159b..416a1ddb3ac5 100644 --- a/drivers/staging/rtl8192u/r8192U_dm.c +++ b/drivers/staging/rtl8192u/r8192U_dm.c @@ -120,7 +120,7 @@ static void dm_ctstoself(struct net_device *dev); * Prepare SW resource for HW dynamic mechanism. * * Assumption: - * This function is only invoked at driver intialization once. + * This function is only invoked at driver initialization once. */ void init_hal_dm(struct net_device *dev) { diff --git a/drivers/staging/rtl8712/rtl8712_xmit.c b/drivers/staging/rtl8712/rtl8712_xmit.c index a3093ac1204b..8c756df0438d 100644 --- a/drivers/staging/rtl8712/rtl8712_xmit.c +++ b/drivers/staging/rtl8712/rtl8712_xmit.c @@ -340,7 +340,7 @@ u8 r8712_append_mpdu_unit(struct xmit_buf *pxmitbuf, u8 r8712_xmitframe_aggr_1st(struct xmit_buf *pxmitbuf, struct xmit_frame *pxmitframe) { - /* linux complete context doesnt need to protect */ + /* linux complete context doesn't need to protect */ pxmitframe->pxmitbuf = pxmitbuf; pxmitbuf->priv_data = pxmitframe; pxmitframe->pxmit_urb[0] = pxmitbuf->pxmit_urb[0]; diff --git a/drivers/staging/rtl8712/rtl871x_mp_phy_regdef.h b/drivers/staging/rtl8712/rtl871x_mp_phy_regdef.h index 8e2586231ffd..2e9120a21a0b 100644 --- a/drivers/staging/rtl8712/rtl871x_mp_phy_regdef.h +++ b/drivers/staging/rtl8712/rtl871x_mp_phy_regdef.h @@ -603,7 +603,7 @@ #define bCCKRxIG 0x7f00 #define bCCKLNAPolarity 0x800000 #define bCCKRx1stGain 0x7f0000 -#define bCCKRFExtend 0x20000000 /* CCK Rx inital gain polarity */ +#define bCCKRFExtend 0x20000000 /* CCK Rx initial gain polarity */ #define bCCKRxAGCSatLevel 0x1f000000 #define bCCKRxAGCSatCount 0xe0 #define bCCKRxRFSettle 0x1f /* AGCsamp_dly */ diff --git a/drivers/staging/rtl8723au/hal/HalPwrSeqCmd.c b/drivers/staging/rtl8723au/hal/HalPwrSeqCmd.c index ae090ab11585..0a3d96e840cc 100644 --- a/drivers/staging/rtl8723au/hal/HalPwrSeqCmd.c +++ b/drivers/staging/rtl8723au/hal/HalPwrSeqCmd.c @@ -92,7 +92,7 @@ u8 HalPwrSeqCmdParsing23a(struct rtw_adapter *padapter, u8 CutVersion, value |= (GET_PWR_CFG_VALUE(PwrCfgCmd) & GET_PWR_CFG_MASK(PwrCfgCmd)); - /* Write the value back to sytem register */ + /* Write the value back to system register */ rtl8723au_write8(padapter, offset, value); break; diff --git a/drivers/staging/rtl8723au/hal/odm.c b/drivers/staging/rtl8723au/hal/odm.c index ec543cfe1b45..eb598cf8d229 100644 --- a/drivers/staging/rtl8723au/hal/odm.c +++ b/drivers/staging/rtl8723au/hal/odm.c @@ -40,7 +40,7 @@ static u32 EDCAParam[HT_IOT_PEER_MAX][3] = { /* UL DL */ {0x5ea42b, 0xa630, 0x5e431c}, /* 11:airgocap AP */ }; -/* EDCA Paramter for AP/ADSL by Mingzhi 2011-11-22 */ +/* EDCA Parameter for AP/ADSL by Mingzhi 2011-11-22 */ /* Global var */ u32 OFDMSwingTable23A[OFDM_TABLE_SIZE_92D] = { diff --git a/drivers/staging/rtl8723au/hal/rtl8723a_hal_init.c b/drivers/staging/rtl8723au/hal/rtl8723a_hal_init.c index 04d01833dc30..efe173072ad5 100644 --- a/drivers/staging/rtl8723au/hal/rtl8723a_hal_init.c +++ b/drivers/staging/rtl8723au/hal/rtl8723a_hal_init.c @@ -1396,7 +1396,7 @@ static void _DisableAnalog(struct rtw_adapter *padapter, bool bWithoutHWSM) /* value16 |= (APDM_HOST | FSM_HSUS |/PFM_ALDN); */ /* 2010/08/31 According to Filen description, we need to use HW to shut down 8051 automatically. */ - /* Becasue suspend operatione need the asistance of 8051 + /* Because suspend operation need the asistance of 8051 to wait for 3ms. */ value16 = APDM_HOST | AFSM_HSUS | PFM_ALDN; } else { diff --git a/drivers/staging/rtl8723au/hal/rtl8723a_phycfg.c b/drivers/staging/rtl8723au/hal/rtl8723a_phycfg.c index 46a30659c96f..7fa97808b951 100644 --- a/drivers/staging/rtl8723au/hal/rtl8723a_phycfg.c +++ b/drivers/staging/rtl8723au/hal/rtl8723a_phycfg.c @@ -660,7 +660,7 @@ phy_BB8723a_Config_ParaFile(struct rtw_adapter *Adapter) /* */ /* 1. Read PHY_REG.TXT BB INIT!! */ - /* We will seperate as 88C / 92C according to chip version */ + /* We will separate as 88C / 92C according to chip version */ /* */ ODM_ReadAndConfig_PHY_REG_1T_8723A(&pHalData->odmpriv); diff --git a/drivers/staging/rtl8723au/hal/rtl8723a_rf6052.c b/drivers/staging/rtl8723au/hal/rtl8723a_rf6052.c index 3e3f18634ffe..4909835cc540 100644 --- a/drivers/staging/rtl8723au/hal/rtl8723a_rf6052.c +++ b/drivers/staging/rtl8723au/hal/rtl8723a_rf6052.c @@ -138,7 +138,7 @@ void rtl823a_phy_rf6052setccktxpower(struct rtw_adapter *Adapter, /* Currently, we cannot fully disable driver dynamic tx power * mechanism because it is referenced by BT coexist mechanism. */ /* In the future, two mechanism shall be separated from each other - * and maintained independantly. Thanks for Lanhsin's reminder. */ + * and maintained independently. Thanks for Lanhsin's reminder. */ if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level1) { TxAGC[RF_PATH_A] = 0x10101010; TxAGC[RF_PATH_B] = 0x10101010; @@ -300,7 +300,7 @@ getTxPowerWriteValByRegulatory(struct rtw_adapter *Adapter, u8 Channel, /* Currently, we cannot fully disable driver dynamic tx power mechanism because it is referenced by BT coexist mechanism. */ /* In the future, two mechanism shall be separated from each other and - maintained independantly. Thanks for Lanhsin's reminder. */ + maintained independently. Thanks for Lanhsin's reminder. */ if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level1) writeVal = 0x14141414; diff --git a/drivers/staging/rtl8723au/hal/rtl8723au_xmit.c b/drivers/staging/rtl8723au/hal/rtl8723au_xmit.c index 6bf87fe86644..14746dd8db78 100644 --- a/drivers/staging/rtl8723au/hal/rtl8723au_xmit.c +++ b/drivers/staging/rtl8723au/hal/rtl8723au_xmit.c @@ -252,7 +252,7 @@ static s32 update_txdesc(struct xmit_frame *pxmitframe, u8 *pmem, s32 sz) } /* (1) The sequence number of each non-Qos frame / broadcast / multicast / */ - /* mgnt frame should be controled by Hw because Fw will also send null data */ + /* mgnt frame should be controlled by Hw because Fw will also send null data */ /* which we cannot control when Fw LPS enable. */ /* --> default enable non-Qos data sequense number. 2010.06.23. by tynli. */ /* (2) Enable HW SEQ control for beacon packet, because we use Hw beacon. */ diff --git a/drivers/staging/rtl8723au/hal/usb_halinit.c b/drivers/staging/rtl8723au/hal/usb_halinit.c index 42ae29d26302..68156a13d00f 100644 --- a/drivers/staging/rtl8723au/hal/usb_halinit.c +++ b/drivers/staging/rtl8723au/hal/usb_halinit.c @@ -360,7 +360,7 @@ static void _InitWMACSetting(struct rtw_adapter *Adapter) /* 2010.09.08 hpfan */ /* Since ADF is removed from RCR, ps-poll will not be indicate to driver, */ - /* RxFilterMap should mask ps-poll to gurantee AP mode can + /* RxFilterMap should mask ps-poll to guarantee AP mode can rx ps-poll. */ /* value16 = 0x400; */ /* rtl8723au_write16(Adapter, REG_RXFLTMAP1, value16); */ diff --git a/drivers/staging/rtl8723au/include/odm_debug.h b/drivers/staging/rtl8723au/include/odm_debug.h index 83be5bab9e09..c4b375a6f409 100644 --- a/drivers/staging/rtl8723au/include/odm_debug.h +++ b/drivers/staging/rtl8723au/include/odm_debug.h @@ -22,7 +22,7 @@ /* Define the debug levels */ /* */ /* 1. DBG_TRACE and DBG_LOUD are used for normal cases. */ -/* So that, they can help SW engineer to develope or trace states changed */ +/* So that, they can help SW engineer to develop or trace states changed */ /* and also help HW enginner to trace every operation to and from HW, */ /* e.g IO, Tx, Rx. */ /* */ diff --git a/drivers/staging/rtl8723au/include/rtl8723a_hal.h b/drivers/staging/rtl8723au/include/rtl8723a_hal.h index ad3a442bc000..8ee301b44f0f 100644 --- a/drivers/staging/rtl8723au/include/rtl8723a_hal.h +++ b/drivers/staging/rtl8723au/include/rtl8723a_hal.h @@ -193,7 +193,7 @@ enum ChannelPlan /* | | Reserved(14bytes) | */ /* */ -/* PG data exclude header, dummy 6 bytes frome CP test and reserved 1byte. */ +/* PG data exclude header, dummy 6 bytes from CP test and reserved 1byte. */ #define EFUSE_OOB_PROTECT_BYTES 15 #define EFUSE_REAL_CONTENT_LEN_8723A 512 diff --git a/drivers/staging/rtl8723au/include/rtw_cmd.h b/drivers/staging/rtl8723au/include/rtw_cmd.h index 775dcdc1e7b9..4dcc9253be51 100644 --- a/drivers/staging/rtl8723au/include/rtw_cmd.h +++ b/drivers/staging/rtl8723au/include/rtw_cmd.h @@ -657,7 +657,7 @@ struct TDLSoption_param { Result: 0x00: success -0x01: sucess, and check Response. +0x01: success, and check Response. 0x02: cmd ignored due to duplicated sequcne number 0x03: cmd dropped due to invalid cmd code 0x04: reserved. diff --git a/drivers/staging/rtl8723au/include/rtw_mlme.h b/drivers/staging/rtl8723au/include/rtw_mlme.h index a6751f138336..dbd3a5f5c523 100644 --- a/drivers/staging/rtl8723au/include/rtw_mlme.h +++ b/drivers/staging/rtl8723au/include/rtw_mlme.h @@ -50,11 +50,11 @@ #define WIFI_SITE_MONITOR 0x00000800 #define WIFI_MP_STATE 0x00010000 -#define WIFI_MP_CTX_BACKGROUND 0x00020000 /* in continous tx background */ -#define WIFI_MP_CTX_ST 0x00040000 /* in continous tx with single-tone */ -#define WIFI_MP_CTX_BACKGROUND_PENDING 0x00080000 /* pending in continous tx background due to out of skb */ -#define WIFI_MP_CTX_CCK_HW 0x00100000 /* in continous tx */ -#define WIFI_MP_CTX_CCK_CS 0x00200000 /* in continous tx with carrier suppression */ +#define WIFI_MP_CTX_BACKGROUND 0x00020000 /* in continuous tx background */ +#define WIFI_MP_CTX_ST 0x00040000 /* in continuous tx with single-tone */ +#define WIFI_MP_CTX_BACKGROUND_PENDING 0x00080000 /* pending in continuous tx background due to out of skb */ +#define WIFI_MP_CTX_CCK_HW 0x00100000 /* in continuous tx */ +#define WIFI_MP_CTX_CCK_CS 0x00200000 /* in continuous tx with carrier suppression */ #define WIFI_MP_LPBK_STATE 0x00400000 #define _FW_UNDER_LINKING WIFI_UNDER_LINKING diff --git a/drivers/staging/rtl8723au/include/rtw_mlme_ext.h b/drivers/staging/rtl8723au/include/rtw_mlme_ext.h index ffb37b252fc1..ea2a6c914d38 100644 --- a/drivers/staging/rtl8723au/include/rtw_mlme_ext.h +++ b/drivers/staging/rtl8723au/include/rtw_mlme_ext.h @@ -103,7 +103,7 @@ extern unsigned char WMM_PARA_OUI23A[]; /* Note: */ /* We just add new channel plan when the new channel plan is different from any of the following */ /* channel plan. */ -/* If you just wnat to customize the acitions(scan period or join actions) about one of the channel plan, */ +/* If you just want to customize the actions(scan period or join actions) about one of the channel plan, */ /* customize them in struct rt_channel_info in the RT_CHANNEL_LIST. */ /* */ enum { /* _RT_CHANNEL_DOMAIN */ diff --git a/drivers/staging/rtl8723au/include/sta_info.h b/drivers/staging/rtl8723au/include/sta_info.h index c756b4f7f5d5..e7260050e533 100644 --- a/drivers/staging/rtl8723au/include/sta_info.h +++ b/drivers/staging/rtl8723au/include/sta_info.h @@ -332,7 +332,7 @@ struct sta_priv { */ struct sta_info *sta_aid[NUM_STA]; - u16 sta_dz_bitmap;/* only support 15 stations, staion aid bitmap + u16 sta_dz_bitmap;/* only support 15 stations, station aid bitmap * for sleeping sta. */ u16 tim_bitmap;/* only support 15 stations, * aid=0~15 mapping bit0~bit15 */ diff --git a/drivers/staging/sm750fb/ddk750_help.h b/drivers/staging/sm750fb/ddk750_help.h index 07c8264fac95..e7e49cebd303 100644 --- a/drivers/staging/sm750fb/ddk750_help.h +++ b/drivers/staging/sm750fb/ddk750_help.h @@ -14,7 +14,7 @@ #warning "big endian on target cpu and enable nature big endian support of 718 capability !" #define PEEK32(addr) __raw_readl(mmio750 + addr) #define POKE32(addr,data) __raw_writel(data, mmio750 + addr) -#else /* software control endianess */ +#else /* software control endianness */ #define PEEK32(addr) readl(addr + mmio750) #define POKE32(addr,data) writel(data, addr + mmio750) #endif diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c index 2e418fb6ffde..021d4c3b2b10 100644 --- a/drivers/staging/sm750fb/ddk750_mode.c +++ b/drivers/staging/sm750fb/ddk750_mode.c @@ -162,7 +162,7 @@ static int programModeRegisters(mode_parameter_t * pModeParam,pll_value_t * pll) /* May a hardware bug or just my test chip (not confirmed). * PANEL_DISPLAY_CTRL register seems requiring few writes - * before a value can be succesfully written in. + * before a value can be successfully written in. * Added some masks to mask out the reserved bits. * Note: This problem happens by design. The hardware will wait for the * next vertical sync to turn on/off the plane. diff --git a/drivers/staging/sm750fb/ddk750_reg.h b/drivers/staging/sm750fb/ddk750_reg.h index 2016f97d2a3d..1a40dc2a2f75 100644 --- a/drivers/staging/sm750fb/ddk750_reg.h +++ b/drivers/staging/sm750fb/ddk750_reg.h @@ -1885,10 +1885,10 @@ #define DISPLAY_CONTROL_750LE 0x80288 /* Palette RAM */ -/* Panel Pallete register starts at 0x080400 ~ 0x0807FC */ +/* Panel Palette register starts at 0x080400 ~ 0x0807FC */ #define PANEL_PALETTE_RAM 0x080400 -/* Panel Pallete register starts at 0x080C00 ~ 0x080FFC */ +/* Panel Palette register starts at 0x080C00 ~ 0x080FFC */ #define CRT_PALETTE_RAM 0x080C00 /* 2D registers diff --git a/drivers/staging/sm750fb/ddk750_sii164.c b/drivers/staging/sm750fb/ddk750_sii164.c index 3d224d6a74ff..84464c1bfdd8 100644 --- a/drivers/staging/sm750fb/ddk750_sii164.c +++ b/drivers/staging/sm750fb/ddk750_sii164.c @@ -256,7 +256,7 @@ long sii164InitChip( -/* below sii164 function is not neccessary */ +/* below sii164 function is not necessary */ #ifdef SII164_FULL_FUNCTIONS @@ -388,7 +388,7 @@ unsigned char sii164IsConnected(void) /* * sii164CheckInterrupt - * Checks if interrupt has occured. + * Checks if interrupt has occurred. * * Output: * 0 - No interrupt diff --git a/drivers/staging/sm750fb/readme b/drivers/staging/sm750fb/readme index ab9af791653d..cfa45958b9d2 100644 --- a/drivers/staging/sm750fb/readme +++ b/drivers/staging/sm750fb/readme @@ -5,7 +5,7 @@ Introduction: - 2D acceleration - 16MB integrated video memory -About the kernel module paramter of driver: +About the kernel module parameter of driver: Use 1280,8bpp index color and 60 hz mode: insmod ./sm750fb.ko g_option="1280x1024-8@60" @@ -20,16 +20,16 @@ About the kernel module paramter of driver: and user can use con2fb to link fbX and ttyX Notes: - 1) if you build the driver with built-in method, the paramter + 1) if you build the driver with built-in method, the parameter you edited in the grub config file will be also the - same format as above modular method,but additionaly add + same format as above modular method,but additionally add "video=sm750fb:" ahead of parameters,so,it looks like: video=sm750fb:noaccel,1280x1024@60,otherparam,etc... it equal to modular method with below command: insmod ./sm750fb.ko g_option="noaccel:1280x1024@60:otherparm:etc..." - 2) if you put 800x600 into the paramter without bpp and + 2) if you put 800x600 into the parameter without bpp and refresh rate, kernel driver will defaulty use 16bpp and 60hz Important: diff --git a/drivers/staging/sm750fb/sm750.c b/drivers/staging/sm750fb/sm750.c index 3c7ea95dd9f9..77310ff325b2 100644 --- a/drivers/staging/sm750fb/sm750.c +++ b/drivers/staging/sm750fb/sm750.c @@ -207,7 +207,7 @@ static void lynxfb_ops_fillrect(struct fb_info *info, /* * If not use spin_lock,system will die if user load driver - * and immediatly unload driver frequently (dual) + * and immediately unload driver frequently (dual) */ if (share->dual) spin_lock(&share->slock); @@ -239,7 +239,7 @@ static void lynxfb_ops_copyarea(struct fb_info *info, /* * If not use spin_lock, system will die if user load driver - * and immediatly unload driver frequently (dual) + * and immediately unload driver frequently (dual) */ if (share->dual) spin_lock(&share->slock); @@ -283,7 +283,7 @@ static void lynxfb_ops_imageblit(struct fb_info *info, _do_work: /* * If not use spin_lock, system will die if user load driver - * and immediatly unload driver frequently (dual) + * and immediately unload driver frequently (dual) */ if (share->dual) spin_lock(&share->slock); @@ -479,7 +479,7 @@ static int lynxfb_resume(struct pci_dev *pdev) ret = pci_set_power_state(pdev, PCI_D0); if (ret) { - pr_err("error:%d occured in pci_set_power_state\n", ret); + pr_err("error:%d occurred in pci_set_power_state\n", ret); return ret; } @@ -488,7 +488,7 @@ static int lynxfb_resume(struct pci_dev *pdev) pci_restore_state(pdev); ret = pci_enable_device(pdev); if (ret) { - pr_err("error:%d occured in pci_enable_device\n", ret); + pr_err("error:%d occurred in pci_enable_device\n", ret); return ret; } pci_set_master(pdev); @@ -1170,7 +1170,7 @@ static int lynxfb_pci_probe(struct pci_dev *pdev, pr_err("Unable to setup MTRR.\n"); } else { share->mtrr.vram_added = 1; - pr_info("MTRR added succesfully\n"); + pr_info("MTRR added successfully\n"); } } #endif diff --git a/drivers/staging/sm750fb/sm750_accel.c b/drivers/staging/sm750fb/sm750_accel.c index c5a372690737..6a04ef86eb13 100644 --- a/drivers/staging/sm750fb/sm750_accel.c +++ b/drivers/staging/sm750fb/sm750_accel.c @@ -246,7 +246,7 @@ unsigned int rop2) /* ROP value */ #if 0 /* Program pitch (distance between the 1st points of two adjacent lines). Note that input pitch is BYTE value, but the 2D Pitch register uses - pixel values. Need Byte to pixel convertion. + pixel values. Need Byte to pixel conversion. */ if(Bpp == 3){ sx *= 3; @@ -362,7 +362,7 @@ int hw_imageblit(struct lynx_accel *accel, #if 0 /* Program pitch (distance between the 1st points of two adjacent lines). Note that input pitch is BYTE value, but the 2D Pitch register uses - pixel values. Need Byte to pixel convertion. + pixel values. Need Byte to pixel conversion. */ if(bytePerPixel == 3 ){ dx *= 3; diff --git a/drivers/staging/sm750fb/sm750_hw.h b/drivers/staging/sm750fb/sm750_hw.h index b05be5e99f51..c607d9b81cd8 100644 --- a/drivers/staging/sm750fb/sm750_hw.h +++ b/drivers/staging/sm750fb/sm750_hw.h @@ -65,7 +65,7 @@ struct sm750_state{ }; /* sm750_share stands for a presentation of two frame buffer - that use one sm750 adaptor, it is similiar to the super class of lynx_share + that use one sm750 adaptor, it is similar to the super class of lynx_share in C++ */ diff --git a/drivers/staging/unisys/include/guestlinuxdebug.h b/drivers/staging/unisys/include/guestlinuxdebug.h index 957a627d0527..98150aa5bd01 100644 --- a/drivers/staging/unisys/include/guestlinuxdebug.h +++ b/drivers/staging/unisys/include/guestlinuxdebug.h @@ -135,7 +135,7 @@ enum event_pc { /* POSTCODE event identifier tuples */ #define POSTCODE_SEVERITY_ERR DIAG_SEVERITY_ERR #define POSTCODE_SEVERITY_WARNING DIAG_SEVERITY_WARNING #define POSTCODE_SEVERITY_INFO DIAG_SEVERITY_PRINT /* TODO-> Info currently - * doesnt show, so we + * doesn't show, so we * set info=warning */ /* example call of POSTCODE_LINUX_2(VISOR_CHIPSET_PC, POSTCODE_SEVERITY_ERR); * Please also note that the resulting postcode is in hex, so if you are diff --git a/drivers/staging/vt6655/rxtx.c b/drivers/staging/vt6655/rxtx.c index 74687761bd2e..33c4aa49946d 100644 --- a/drivers/staging/vt6655/rxtx.c +++ b/drivers/staging/vt6655/rxtx.c @@ -656,7 +656,7 @@ s_vFillRTSHead( uRTSFrameLen -= 4; } - /* Note: So far RTSHead dosen't appear in ATIM & Beacom DMA, so we don't need to take them into account. + /* Note: So far RTSHead doesn't appear in ATIM & Beacom DMA, so we don't need to take them into account. Otherwise, we need to modify codes for them. */ if (byPktType == PK_TYPE_11GB || byPktType == PK_TYPE_11GA) { if (byFBOption == AUTO_FB_NONE) { |