diff options
-rw-r--r-- | drivers/acpi/apei/apei-base.c | 3 | ||||
-rw-r--r-- | drivers/acpi/processor_idle.c | 4 | ||||
-rw-r--r-- | drivers/acpi/processor_perflib.c | 7 | ||||
-rw-r--r-- | drivers/cpufreq/Kconfig.x86 | 2 | ||||
-rw-r--r-- | drivers/cpufreq/acpi-cpufreq.c | 7 | ||||
-rw-r--r-- | drivers/cpufreq/cpufreq-cpu0.c | 5 | ||||
-rw-r--r-- | drivers/cpufreq/omap-cpufreq.c | 3 | ||||
-rw-r--r-- | drivers/devfreq/devfreq.c | 5 | ||||
-rw-r--r-- | drivers/devfreq/exynos4_bus.c | 94 | ||||
-rw-r--r-- | drivers/idle/intel_idle.c | 3 |
10 files changed, 103 insertions, 30 deletions
diff --git a/drivers/acpi/apei/apei-base.c b/drivers/acpi/apei/apei-base.c index 00a783661d0b..46f80e2c92f7 100644 --- a/drivers/acpi/apei/apei-base.c +++ b/drivers/acpi/apei/apei-base.c @@ -590,6 +590,9 @@ static int apei_check_gar(struct acpi_generic_address *reg, u64 *paddr, if (bit_width == 32 && bit_offset == 0 && (*paddr & 0x03) == 0 && *access_bit_width < 32) *access_bit_width = 32; + else if (bit_width == 64 && bit_offset == 0 && (*paddr & 0x07) == 0 && + *access_bit_width < 64) + *access_bit_width = 64; if ((bit_width + bit_offset) > *access_bit_width) { pr_warning(FW_BUG APEI_PFX diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index f1a5da44591d..ed9a1cc690be 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -958,6 +958,9 @@ static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr) return -EINVAL; } + if (!dev) + return -EINVAL; + dev->cpu = pr->id; if (max_cstate == 0) @@ -1149,6 +1152,7 @@ int acpi_processor_cst_has_changed(struct acpi_processor *pr) } /* Populate Updated C-state information */ + acpi_processor_get_power_info(pr); acpi_processor_setup_cpuidle_states(pr); /* Enable all cpuidle devices */ diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index 836bfe069042..53e7ac9403a7 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -340,6 +340,13 @@ static void amd_fixup_frequency(struct acpi_processor_px *px, int i) if ((boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model < 10) || boot_cpu_data.x86 == 0x11) { rdmsr(MSR_AMD_PSTATE_DEF_BASE + index, lo, hi); + /* + * MSR C001_0064+: + * Bit 63: PstateEn. Read-write. If set, the P-state is valid. + */ + if (!(hi & BIT(31))) + return; + fid = lo & 0x3f; did = (lo >> 6) & 7; if (boot_cpu_data.x86 == 0x10) diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86 index 934854ae5eb4..7227cd734042 100644 --- a/drivers/cpufreq/Kconfig.x86 +++ b/drivers/cpufreq/Kconfig.x86 @@ -106,7 +106,7 @@ config X86_POWERNOW_K7_ACPI config X86_POWERNOW_K8 tristate "AMD Opteron/Athlon64 PowerNow!" select CPU_FREQ_TABLE - depends on ACPI && ACPI_PROCESSOR + depends on ACPI && ACPI_PROCESSOR && X86_ACPI_CPUFREQ help This adds the CPUFreq driver for K8/early Opteron/Athlon64 processors. Support for K10 and newer processors is now in acpi-cpufreq. diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c index 0d048f6a2b23..7b0d49d78c61 100644 --- a/drivers/cpufreq/acpi-cpufreq.c +++ b/drivers/cpufreq/acpi-cpufreq.c @@ -1030,4 +1030,11 @@ MODULE_PARM_DESC(acpi_pstate_strict, late_initcall(acpi_cpufreq_init); module_exit(acpi_cpufreq_exit); +static const struct x86_cpu_id acpi_cpufreq_ids[] = { + X86_FEATURE_MATCH(X86_FEATURE_ACPI), + X86_FEATURE_MATCH(X86_FEATURE_HW_PSTATE), + {} +}; +MODULE_DEVICE_TABLE(x86cpu, acpi_cpufreq_ids); + MODULE_ALIAS("acpi"); diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c index 52bf36d599f5..debc5a7c8db6 100644 --- a/drivers/cpufreq/cpufreq-cpu0.c +++ b/drivers/cpufreq/cpufreq-cpu0.c @@ -71,12 +71,15 @@ static int cpu0_set_target(struct cpufreq_policy *policy, } if (cpu_reg) { + rcu_read_lock(); opp = opp_find_freq_ceil(cpu_dev, &freq_Hz); if (IS_ERR(opp)) { + rcu_read_unlock(); pr_err("failed to find OPP for %ld\n", freq_Hz); return PTR_ERR(opp); } volt = opp_get_voltage(opp); + rcu_read_unlock(); tol = volt * voltage_tolerance / 100; volt_old = regulator_get_voltage(cpu_reg); } @@ -236,12 +239,14 @@ static int cpu0_cpufreq_driver_init(void) */ for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++) ; + rcu_read_lock(); opp = opp_find_freq_exact(cpu_dev, freq_table[0].frequency * 1000, true); min_uV = opp_get_voltage(opp); opp = opp_find_freq_exact(cpu_dev, freq_table[i-1].frequency * 1000, true); max_uV = opp_get_voltage(opp); + rcu_read_unlock(); ret = regulator_set_voltage_time(cpu_reg, min_uV, max_uV); if (ret > 0) transition_latency += ret * 1000; diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c index 1f3417a8322d..97102b05843f 100644 --- a/drivers/cpufreq/omap-cpufreq.c +++ b/drivers/cpufreq/omap-cpufreq.c @@ -110,13 +110,16 @@ static int omap_target(struct cpufreq_policy *policy, freq = ret; if (mpu_reg) { + rcu_read_lock(); opp = opp_find_freq_ceil(mpu_dev, &freq); if (IS_ERR(opp)) { + rcu_read_unlock(); dev_err(mpu_dev, "%s: unable to find MPU OPP for %d\n", __func__, freqs.new); return -EINVAL; } volt = opp_get_voltage(opp); + rcu_read_unlock(); tol = volt * OPP_TOLERANCE / 100; volt_old = regulator_get_voltage(mpu_reg); } diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index 53766f39aadd..3b367973a802 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -994,6 +994,11 @@ module_exit(devfreq_exit); * @freq: The frequency given to target function * @flags: Flags handed from devfreq framework. * + * Locking: This function must be called under rcu_read_lock(). opp is a rcu + * protected pointer. The reason for the same is that the opp pointer which is + * returned will remain valid for use with opp_get_{voltage, freq} only while + * under the locked area. The pointer returned must be used prior to unlocking + * with rcu_read_unlock() to maintain the integrity of the pointer. */ struct opp *devfreq_recommended_opp(struct device *dev, unsigned long *freq, u32 flags) diff --git a/drivers/devfreq/exynos4_bus.c b/drivers/devfreq/exynos4_bus.c index 80c745e83082..46d94e9e95b5 100644 --- a/drivers/devfreq/exynos4_bus.c +++ b/drivers/devfreq/exynos4_bus.c @@ -73,6 +73,16 @@ enum busclk_level_idx { #define EX4210_LV_NUM (LV_2 + 1) #define EX4x12_LV_NUM (LV_4 + 1) +/** + * struct busfreq_opp_info - opp information for bus + * @rate: Frequency in hertz + * @volt: Voltage in microvolts corresponding to this OPP + */ +struct busfreq_opp_info { + unsigned long rate; + unsigned long volt; +}; + struct busfreq_data { enum exynos4_busf_type type; struct device *dev; @@ -80,7 +90,7 @@ struct busfreq_data { bool disabled; struct regulator *vdd_int; struct regulator *vdd_mif; /* Exynos4412/4212 only */ - struct opp *curr_opp; + struct busfreq_opp_info curr_oppinfo; struct exynos4_ppmu dmc[2]; struct notifier_block pm_notifier; @@ -296,13 +306,14 @@ static unsigned int exynos4x12_clkdiv_sclkip[][3] = { }; -static int exynos4210_set_busclk(struct busfreq_data *data, struct opp *opp) +static int exynos4210_set_busclk(struct busfreq_data *data, + struct busfreq_opp_info *oppi) { unsigned int index; unsigned int tmp; for (index = LV_0; index < EX4210_LV_NUM; index++) - if (opp_get_freq(opp) == exynos4210_busclk_table[index].clk) + if (oppi->rate == exynos4210_busclk_table[index].clk) break; if (index == EX4210_LV_NUM) @@ -361,13 +372,14 @@ static int exynos4210_set_busclk(struct busfreq_data *data, struct opp *opp) return 0; } -static int exynos4x12_set_busclk(struct busfreq_data *data, struct opp *opp) +static int exynos4x12_set_busclk(struct busfreq_data *data, + struct busfreq_opp_info *oppi) { unsigned int index; unsigned int tmp; for (index = LV_0; index < EX4x12_LV_NUM; index++) - if (opp_get_freq(opp) == exynos4x12_mifclk_table[index].clk) + if (oppi->rate == exynos4x12_mifclk_table[index].clk) break; if (index == EX4x12_LV_NUM) @@ -576,11 +588,12 @@ static int exynos4x12_get_intspec(unsigned long mifclk) return -EINVAL; } -static int exynos4_bus_setvolt(struct busfreq_data *data, struct opp *opp, - struct opp *oldopp) +static int exynos4_bus_setvolt(struct busfreq_data *data, + struct busfreq_opp_info *oppi, + struct busfreq_opp_info *oldoppi) { int err = 0, tmp; - unsigned long volt = opp_get_voltage(opp); + unsigned long volt = oppi->volt; switch (data->type) { case TYPE_BUSF_EXYNOS4210: @@ -595,11 +608,11 @@ static int exynos4_bus_setvolt(struct busfreq_data *data, struct opp *opp, if (err) break; - tmp = exynos4x12_get_intspec(opp_get_freq(opp)); + tmp = exynos4x12_get_intspec(oppi->rate); if (tmp < 0) { err = tmp; regulator_set_voltage(data->vdd_mif, - opp_get_voltage(oldopp), + oldoppi->volt, MAX_SAFEVOLT); break; } @@ -609,7 +622,7 @@ static int exynos4_bus_setvolt(struct busfreq_data *data, struct opp *opp, /* Try to recover */ if (err) regulator_set_voltage(data->vdd_mif, - opp_get_voltage(oldopp), + oldoppi->volt, MAX_SAFEVOLT); break; default: @@ -626,17 +639,26 @@ static int exynos4_bus_target(struct device *dev, unsigned long *_freq, struct platform_device *pdev = container_of(dev, struct platform_device, dev); struct busfreq_data *data = platform_get_drvdata(pdev); - struct opp *opp = devfreq_recommended_opp(dev, _freq, flags); - unsigned long freq = opp_get_freq(opp); - unsigned long old_freq = opp_get_freq(data->curr_opp); + struct opp *opp; + unsigned long freq; + unsigned long old_freq = data->curr_oppinfo.rate; + struct busfreq_opp_info new_oppinfo; - if (IS_ERR(opp)) + rcu_read_lock(); + opp = devfreq_recommended_opp(dev, _freq, flags); + if (IS_ERR(opp)) { + rcu_read_unlock(); return PTR_ERR(opp); + } + new_oppinfo.rate = opp_get_freq(opp); + new_oppinfo.volt = opp_get_voltage(opp); + rcu_read_unlock(); + freq = new_oppinfo.rate; if (old_freq == freq) return 0; - dev_dbg(dev, "targetting %lukHz %luuV\n", freq, opp_get_voltage(opp)); + dev_dbg(dev, "targetting %lukHz %luuV\n", freq, new_oppinfo.volt); mutex_lock(&data->lock); @@ -644,17 +666,18 @@ static int exynos4_bus_target(struct device *dev, unsigned long *_freq, goto out; if (old_freq < freq) - err = exynos4_bus_setvolt(data, opp, data->curr_opp); + err = exynos4_bus_setvolt(data, &new_oppinfo, + &data->curr_oppinfo); if (err) goto out; if (old_freq != freq) { switch (data->type) { case TYPE_BUSF_EXYNOS4210: - err = exynos4210_set_busclk(data, opp); + err = exynos4210_set_busclk(data, &new_oppinfo); break; case TYPE_BUSF_EXYNOS4x12: - err = exynos4x12_set_busclk(data, opp); + err = exynos4x12_set_busclk(data, &new_oppinfo); break; default: err = -EINVAL; @@ -664,11 +687,12 @@ static int exynos4_bus_target(struct device *dev, unsigned long *_freq, goto out; if (old_freq > freq) - err = exynos4_bus_setvolt(data, opp, data->curr_opp); + err = exynos4_bus_setvolt(data, &new_oppinfo, + &data->curr_oppinfo); if (err) goto out; - data->curr_opp = opp; + data->curr_oppinfo = new_oppinfo; out: mutex_unlock(&data->lock); return err; @@ -702,7 +726,7 @@ static int exynos4_bus_get_dev_status(struct device *dev, exynos4_read_ppmu(data); busier_dmc = exynos4_get_busier_dmc(data); - stat->current_frequency = opp_get_freq(data->curr_opp); + stat->current_frequency = data->curr_oppinfo.rate; if (busier_dmc) addr = S5P_VA_DMC1; @@ -933,6 +957,7 @@ static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this, struct busfreq_data *data = container_of(this, struct busfreq_data, pm_notifier); struct opp *opp; + struct busfreq_opp_info new_oppinfo; unsigned long maxfreq = ULONG_MAX; int err = 0; @@ -943,18 +968,29 @@ static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this, data->disabled = true; + rcu_read_lock(); opp = opp_find_freq_floor(data->dev, &maxfreq); + if (IS_ERR(opp)) { + rcu_read_unlock(); + dev_err(data->dev, "%s: unable to find a min freq\n", + __func__); + return PTR_ERR(opp); + } + new_oppinfo.rate = opp_get_freq(opp); + new_oppinfo.volt = opp_get_voltage(opp); + rcu_read_unlock(); - err = exynos4_bus_setvolt(data, opp, data->curr_opp); + err = exynos4_bus_setvolt(data, &new_oppinfo, + &data->curr_oppinfo); if (err) goto unlock; switch (data->type) { case TYPE_BUSF_EXYNOS4210: - err = exynos4210_set_busclk(data, opp); + err = exynos4210_set_busclk(data, &new_oppinfo); break; case TYPE_BUSF_EXYNOS4x12: - err = exynos4x12_set_busclk(data, opp); + err = exynos4x12_set_busclk(data, &new_oppinfo); break; default: err = -EINVAL; @@ -962,7 +998,7 @@ static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this, if (err) goto unlock; - data->curr_opp = opp; + data->curr_oppinfo = new_oppinfo; unlock: mutex_unlock(&data->lock); if (err) @@ -1027,13 +1063,17 @@ static int exynos4_busfreq_probe(struct platform_device *pdev) } } + rcu_read_lock(); opp = opp_find_freq_floor(dev, &exynos4_devfreq_profile.initial_freq); if (IS_ERR(opp)) { + rcu_read_unlock(); dev_err(dev, "Invalid initial frequency %lu kHz.\n", exynos4_devfreq_profile.initial_freq); return PTR_ERR(opp); } - data->curr_opp = opp; + data->curr_oppinfo.rate = opp_get_freq(opp); + data->curr_oppinfo.volt = opp_get_voltage(opp); + rcu_read_unlock(); platform_set_drvdata(pdev, data); diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index 4ba384f1ab54..2df9414a72f7 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -448,8 +448,6 @@ static int intel_idle_probe(void) else on_each_cpu(__setup_broadcast_timer, (void *)true, 1); - register_cpu_notifier(&cpu_hotplug_notifier); - pr_debug(PREFIX "v" INTEL_IDLE_VERSION " model 0x%X\n", boot_cpu_data.x86_model); @@ -612,6 +610,7 @@ static int __init intel_idle_init(void) return retval; } } + register_cpu_notifier(&cpu_hotplug_notifier); return 0; } |