diff options
| -rw-r--r-- | Documentation/DocBook/Makefile | 2 | ||||
| -rw-r--r-- | Documentation/DocBook/z8530book.tmpl | 371 | ||||
| -rw-r--r-- | Documentation/networking/index.rst | 1 | ||||
| -rw-r--r-- | Documentation/networking/z8530book.rst | 257 |
4 files changed, 259 insertions, 372 deletions
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index 8a90891c3712..00a61f4ffcff 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -6,7 +6,7 @@ # To add a new book the only step required is to add the book to the # list of DOCBOOKS. -DOCBOOKS := z8530book.xml \ +DOCBOOKS := \ lsm.xml \ mtdnand.xml librs.xml rapidio.xml \ scsi.xml \ diff --git a/Documentation/DocBook/z8530book.tmpl b/Documentation/DocBook/z8530book.tmpl deleted file mode 100644 index 6f3883be877e..000000000000 --- a/Documentation/DocBook/z8530book.tmpl +++ /dev/null @@ -1,371 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?> -<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN" - "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []> - -<book id="Z85230Guide"> - <bookinfo> - <title>Z8530 Programming Guide</title> - - <authorgroup> - <author> - <firstname>Alan</firstname> - <surname>Cox</surname> - <affiliation> - <address> - <email>alan@lxorguk.ukuu.org.uk</email> - </address> - </affiliation> - </author> - </authorgroup> - - <copyright> - <year>2000</year> - <holder>Alan Cox</holder> - </copyright> - - <legalnotice> - <para> - This documentation is free software; you can redistribute - it and/or modify it under the terms of the GNU General Public - License as published by the Free Software Foundation; either - version 2 of the License, or (at your option) any later - version. - </para> - - <para> - This program is distributed in the hope that it will be - useful, but WITHOUT ANY WARRANTY; without even the implied - warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - See the GNU General Public License for more details. - </para> - - <para> - You should have received a copy of the GNU General Public - License along with this program; if not, write to the Free - Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, - MA 02111-1307 USA - </para> - - <para> - For more details see the file COPYING in the source - distribution of Linux. - </para> - </legalnotice> - </bookinfo> - -<toc></toc> - - <chapter id="intro"> - <title>Introduction</title> - <para> - The Z85x30 family synchronous/asynchronous controller chips are - used on a large number of cheap network interface cards. The - kernel provides a core interface layer that is designed to make - it easy to provide WAN services using this chip. - </para> - <para> - The current driver only support synchronous operation. Merging the - asynchronous driver support into this code to allow any Z85x30 - device to be used as both a tty interface and as a synchronous - controller is a project for Linux post the 2.4 release - </para> - </chapter> - - <chapter id="Driver_Modes"> - <title>Driver Modes</title> - <para> - The Z85230 driver layer can drive Z8530, Z85C30 and Z85230 devices - in three different modes. Each mode can be applied to an individual - channel on the chip (each chip has two channels). - </para> - <para> - The PIO synchronous mode supports the most common Z8530 wiring. Here - the chip is interface to the I/O and interrupt facilities of the - host machine but not to the DMA subsystem. When running PIO the - Z8530 has extremely tight timing requirements. Doing high speeds, - even with a Z85230 will be tricky. Typically you should expect to - achieve at best 9600 baud with a Z8C530 and 64Kbits with a Z85230. - </para> - <para> - The DMA mode supports the chip when it is configured to use dual DMA - channels on an ISA bus. The better cards tend to support this mode - of operation for a single channel. With DMA running the Z85230 tops - out when it starts to hit ISA DMA constraints at about 512Kbits. It - is worth noting here that many PC machines hang or crash when the - chip is driven fast enough to hold the ISA bus solid. - </para> - <para> - Transmit DMA mode uses a single DMA channel. The DMA channel is used - for transmission as the transmit FIFO is smaller than the receive - FIFO. it gives better performance than pure PIO mode but is nowhere - near as ideal as pure DMA mode. - </para> - </chapter> - - <chapter id="Using_the_Z85230_driver"> - <title>Using the Z85230 driver</title> - <para> - The Z85230 driver provides the back end interface to your board. To - configure a Z8530 interface you need to detect the board and to - identify its ports and interrupt resources. It is also your problem - to verify the resources are available. - </para> - <para> - Having identified the chip you need to fill in a struct z8530_dev, - which describes each chip. This object must exist until you finally - shutdown the board. Firstly zero the active field. This ensures - nothing goes off without you intending it. The irq field should - be set to the interrupt number of the chip. (Each chip has a single - interrupt source rather than each channel). You are responsible - for allocating the interrupt line. The interrupt handler should be - set to <function>z8530_interrupt</function>. The device id should - be set to the z8530_dev structure pointer. Whether the interrupt can - be shared or not is board dependent, and up to you to initialise. - </para> - <para> - The structure holds two channel structures. - Initialise chanA.ctrlio and chanA.dataio with the address of the - control and data ports. You can or this with Z8530_PORT_SLEEP to - indicate your interface needs the 5uS delay for chip settling done - in software. The PORT_SLEEP option is architecture specific. Other - flags may become available on future platforms, eg for MMIO. - Initialise the chanA.irqs to &z8530_nop to start the chip up - as disabled and discarding interrupt events. This ensures that - stray interrupts will be mopped up and not hang the bus. Set - chanA.dev to point to the device structure itself. The - private and name field you may use as you wish. The private field - is unused by the Z85230 layer. The name is used for error reporting - and it may thus make sense to make it match the network name. - </para> - <para> - Repeat the same operation with the B channel if your chip has - both channels wired to something useful. This isn't always the - case. If it is not wired then the I/O values do not matter, but - you must initialise chanB.dev. - </para> - <para> - If your board has DMA facilities then initialise the txdma and - rxdma fields for the relevant channels. You must also allocate the - ISA DMA channels and do any necessary board level initialisation - to configure them. The low level driver will do the Z8530 and - DMA controller programming but not board specific magic. - </para> - <para> - Having initialised the device you can then call - <function>z8530_init</function>. This will probe the chip and - reset it into a known state. An identification sequence is then - run to identify the chip type. If the checks fail to pass the - function returns a non zero error code. Typically this indicates - that the port given is not valid. After this call the - type field of the z8530_dev structure is initialised to either - Z8530, Z85C30 or Z85230 according to the chip found. - </para> - <para> - Once you have called z8530_init you can also make use of the utility - function <function>z8530_describe</function>. This provides a - consistent reporting format for the Z8530 devices, and allows all - the drivers to provide consistent reporting. - </para> - </chapter> - - <chapter id="Attaching_Network_Interfaces"> - <title>Attaching Network Interfaces</title> - <para> - If you wish to use the network interface facilities of the driver, - then you need to attach a network device to each channel that is - present and in use. In addition to use the generic HDLC - you need to follow some additional plumbing rules. They may seem - complex but a look at the example hostess_sv11 driver should - reassure you. - </para> - <para> - The network device used for each channel should be pointed to by - the netdevice field of each channel. The hdlc-> priv field of the - network device points to your private data - you will need to be - able to find your private data from this. - </para> - <para> - The way most drivers approach this particular problem is to - create a structure holding the Z8530 device definition and - put that into the private field of the network device. The - network device fields of the channels then point back to the - network devices. - </para> - <para> - If you wish to use the generic HDLC then you need to register - the HDLC device. - </para> - <para> - Before you register your network device you will also need to - provide suitable handlers for most of the network device callbacks. - See the network device documentation for more details on this. - </para> - </chapter> - - <chapter id="Configuring_And_Activating_The_Port"> - <title>Configuring And Activating The Port</title> - <para> - The Z85230 driver provides helper functions and tables to load the - port registers on the Z8530 chips. When programming the register - settings for a channel be aware that the documentation recommends - initialisation orders. Strange things happen when these are not - followed. - </para> - <para> - <function>z8530_channel_load</function> takes an array of - pairs of initialisation values in an array of u8 type. The first - value is the Z8530 register number. Add 16 to indicate the alternate - register bank on the later chips. The array is terminated by a 255. - </para> - <para> - The driver provides a pair of public tables. The - z8530_hdlc_kilostream table is for the UK 'Kilostream' service and - also happens to cover most other end host configurations. The - z8530_hdlc_kilostream_85230 table is the same configuration using - the enhancements of the 85230 chip. The configuration loaded is - standard NRZ encoded synchronous data with HDLC bitstuffing. All - of the timing is taken from the other end of the link. - </para> - <para> - When writing your own tables be aware that the driver internally - tracks register values. It may need to reload values. You should - therefore be sure to set registers 1-7, 9-11, 14 and 15 in all - configurations. Where the register settings depend on DMA selection - the driver will update the bits itself when you open or close. - Loading a new table with the interface open is not recommended. - </para> - <para> - There are three standard configurations supported by the core - code. In PIO mode the interface is programmed up to use - interrupt driven PIO. This places high demands on the host processor - to avoid latency. The driver is written to take account of latency - issues but it cannot avoid latencies caused by other drivers, - notably IDE in PIO mode. Because the drivers allocate buffers you - must also prevent MTU changes while the port is open. - </para> - <para> - Once the port is open it will call the rx_function of each channel - whenever a completed packet arrived. This is invoked from - interrupt context and passes you the channel and a network - buffer (struct sk_buff) holding the data. The data includes - the CRC bytes so most users will want to trim the last two - bytes before processing the data. This function is very timing - critical. When you wish to simply discard data the support - code provides the function <function>z8530_null_rx</function> - to discard the data. - </para> - <para> - To active PIO mode sending and receiving the <function> - z8530_sync_open</function> is called. This expects to be passed - the network device and the channel. Typically this is called from - your network device open callback. On a failure a non zero error - status is returned. The <function>z8530_sync_close</function> - function shuts down a PIO channel. This must be done before the - channel is opened again and before the driver shuts down - and unloads. - </para> - <para> - The ideal mode of operation is dual channel DMA mode. Here the - kernel driver will configure the board for DMA in both directions. - The driver also handles ISA DMA issues such as controller - programming and the memory range limit for you. This mode is - activated by calling the <function>z8530_sync_dma_open</function> - function. On failure a non zero error value is returned. - Once this mode is activated it can be shut down by calling the - <function>z8530_sync_dma_close</function>. You must call the close - function matching the open mode you used. - </para> - <para> - The final supported mode uses a single DMA channel to drive the - transmit side. As the Z85C30 has a larger FIFO on the receive - channel this tends to increase the maximum speed a little. - This is activated by calling the <function>z8530_sync_txdma_open - </function>. This returns a non zero error code on failure. The - <function>z8530_sync_txdma_close</function> function closes down - the Z8530 interface from this mode. - </para> - </chapter> - - <chapter id="Network_Layer_Functions"> - <title>Network Layer Functions</title> - <para> - The Z8530 layer provides functions to queue packets for - transmission. The driver internally buffers the frame currently - being transmitted and one further frame (in order to keep back - to back transmission running). Any further buffering is up to - the caller. - </para> - <para> - The function <function>z8530_queue_xmit</function> takes a network - buffer in sk_buff format and queues it for transmission. The - caller must provide the entire packet with the exception of the - bitstuffing and CRC. This is normally done by the caller via - the generic HDLC interface layer. It returns 0 if the buffer has been - queued and non zero values for queue full. If the function accepts - the buffer it becomes property of the Z8530 layer and the caller - should not free it. - </para> - <para> - The function <function>z8530_get_stats</function> returns a pointer - to an internally maintained per interface statistics block. This - provides most of the interface code needed to implement the network - layer get_stats callback. - </para> - </chapter> - - <chapter id="Porting_The_Z8530_Driver"> - <title>Porting The Z8530 Driver</title> - <para> - The Z8530 driver is written to be portable. In DMA mode it makes - assumptions about the use of ISA DMA. These are probably warranted - in most cases as the Z85230 in particular was designed to glue to PC - type machines. The PIO mode makes no real assumptions. - </para> - <para> - Should you need to retarget the Z8530 driver to another architecture - the only code that should need changing are the port I/O functions. - At the moment these assume PC I/O port accesses. This may not be - appropriate for all platforms. Replacing - <function>z8530_read_port</function> and <function>z8530_write_port - </function> is intended to be all that is required to port this - driver layer. - </para> - </chapter> - - <chapter id="bugs"> - <title>Known Bugs And Assumptions</title> - <para> - <variablelist> - <varlistentry><term>Interrupt Locking</term> - <listitem> - <para> - The locking in the driver is done via the global cli/sti lock. This - makes for relatively poor SMP performance. Switching this to use a - per device spin lock would probably materially improve performance. - </para> - </listitem></varlistentry> - - <varlistentry><term>Occasional Failures</term> - <listitem> - <para> - We have reports of occasional failures when run for very long - periods of time and the driver starts to receive junk frames. At - the moment the cause of this is not clear. - </para> - </listitem></varlistentry> - </variablelist> - - </para> - </chapter> - - <chapter id="pubfunctions"> - <title>Public Functions Provided</title> -!Edrivers/net/wan/z85230.c - </chapter> - - <chapter id="intfunctions"> - <title>Internal Functions</title> -!Idrivers/net/wan/z85230.c - </chapter> - -</book> diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst index ff652ff279e8..b5bd87e01f52 100644 --- a/Documentation/networking/index.rst +++ b/Documentation/networking/index.rst @@ -7,6 +7,7 @@ Contents: :maxdepth: 2 kapi + z8530book .. only:: subproject diff --git a/Documentation/networking/z8530book.rst b/Documentation/networking/z8530book.rst new file mode 100644 index 000000000000..31032ee36081 --- /dev/null +++ b/Documentation/networking/z8530book.rst @@ -0,0 +1,257 @@ +======================= +Z8530 Programming Guide +======================= + +:Author: Alan Cox + +Introduction +============ + +The Z85x30 family synchronous/asynchronous controller chips are used on +a large number of cheap network interface cards. The kernel provides a +core interface layer that is designed to make it easy to provide WAN +services using this chip. + +The current driver only support synchronous operation. Merging the +asynchronous driver support into this code to allow any Z85x30 device to +be used as both a tty interface and as a synchronous controller is a +project for Linux post the 2.4 release + +Driver Modes +============ + +The Z85230 driver layer can drive Z8530, Z85C30 and Z85230 devices in +three different modes. Each mode can be applied to an individual channel +on the chip (each chip has two channels). + +The PIO synchronous mode supports the most common Z8530 wiring. Here the +chip is interface to the I/O and interrupt facilities of the host +machine but not to the DMA subsystem. When running PIO the Z8530 has +extremely tight timing requirements. Doing high speeds, even with a +Z85230 will be tricky. Typically you should expect to achieve at best +9600 baud with a Z8C530 and 64Kbits with a Z85230. + +The DMA mode supports the chip when it is configured to use dual DMA +channels on an ISA bus. The better cards tend to support this mode of +operation for a single channel. With DMA running the Z85230 tops out +when it starts to hit ISA DMA constraints at about 512Kbits. It is worth +noting here that many PC machines hang or crash when the chip is driven +fast enough to hold the ISA bus solid. + +Transmit DMA mode uses a single DMA channel. The DMA channel is used for +transmission as the transmit FIFO is smaller than the receive FIFO. it +gives better performance than pure PIO mode but is nowhere near as ideal +as pure DMA mode. + +Using the Z85230 driver +======================= + +The Z85230 driver provides the back end interface to your board. To +configure a Z8530 interface you need to detect the board and to identify +its ports and interrupt resources. It is also your problem to verify the +resources are available. + +Having identified the chip you need to fill in a struct z8530_dev, +which describes each chip. This object must exist until you finally +shutdown the board. Firstly zero the active field. This ensures nothing +goes off without you intending it. The irq field should be set to the +interrupt number of the chip. (Each chip has a single interrupt source +rather than each channel). You are responsible for allocating the +interrupt line. The interrupt handler should be set to +:c:func:`z8530_interrupt()`. The device id should be set to the +z8530_dev structure pointer. Whether the interrupt can be shared or not +is board dependent, and up to you to initialise. + +The structure holds two channel structures. Initialise chanA.ctrlio and +chanA.dataio with the address of the control and data ports. You can or +this with Z8530_PORT_SLEEP to indicate your interface needs the 5uS +delay for chip settling done in software. The PORT_SLEEP option is +architecture specific. Other flags may become available on future +platforms, eg for MMIO. Initialise the chanA.irqs to &z8530_nop to +start the chip up as disabled and discarding interrupt events. This +ensures that stray interrupts will be mopped up and not hang the bus. +Set chanA.dev to point to the device structure itself. The private and +name field you may use as you wish. The private field is unused by the +Z85230 layer. The name is used for error reporting and it may thus make +sense to make it match the network name. + +Repeat the same operation with the B channel if your chip has both +channels wired to something useful. This isn't always the case. If it is +not wired then the I/O values do not matter, but you must initialise +chanB.dev. + +If your board has DMA facilities then initialise the txdma and rxdma +fields for the relevant channels. You must also allocate the ISA DMA +channels and do any necessary board level initialisation to configure +them. The low level driver will do the Z8530 and DMA controller +programming but not board specific magic. + +Having initialised the device you can then call +:c:func:`z8530_init()`. This will probe the chip and reset it into +a known state. An identification sequence is then run to identify the +chip type. If the checks fail to pass the function returns a non zero +error code. Typically this indicates that the port given is not valid. +After this call the type field of the z8530_dev structure is +initialised to either Z8530, Z85C30 or Z85230 according to the chip +found. + +Once you have called z8530_init you can also make use of the utility +function :c:func:`z8530_describe()`. This provides a consistent +reporting format for the Z8530 devices, and allows all the drivers to +provide consistent reporting. + +Attaching Network Interfaces +============================ + +If you wish to use the network interface facilities of the driver, then +you need to attach a network device to each channel that is present and +in use. In addition to use the generic HDLC you need to follow some +additional plumbing rules. They may seem complex but a look at the +example hostess_sv11 driver should reassure you. + +The network device used for each channel should be pointed to by the +netdevice field of each channel. The hdlc-> priv field of the network +device points to your private data - you will need to be able to find +your private data from this. + +The way most drivers approach this particular problem is to create a +structure holding the Z8530 device definition and put that into the +private field of the network device. The network device fields of the +channels then point back to the network devices. + +If you wish to use the generic HDLC then you need to register the HDLC +device. + +Before you register your network device you will also need to provide +suitable handlers for most of the network device callbacks. See the +network device documentation for more details on this. + +Configuring And Activating The Port +=================================== + +The Z85230 driver provides helper functions and tables to load the port +registers on the Z8530 chips. When programming the register settings for +a channel be aware that the documentation recommends initialisation +orders. Strange things happen when these are not followed. + +:c:func:`z8530_channel_load()` takes an array of pairs of +initialisation values in an array of u8 type. The first value is the +Z8530 register number. Add 16 to indicate the alternate register bank on +the later chips. The array is terminated by a 255. + +The driver provides a pair of public tables. The z8530_hdlc_kilostream +table is for the UK 'Kilostream' service and also happens to cover most +other end host configurations. The z8530_hdlc_kilostream_85230 table +is the same configuration using the enhancements of the 85230 chip. The +configuration loaded is standard NRZ encoded synchronous data with HDLC +bitstuffing. All of the timing is taken from the other end of the link. + +When writing your own tables be aware that the driver internally tracks +register values. It may need to reload values. You should therefore be +sure to set registers 1-7, 9-11, 14 and 15 in all configurations. Where +the register settings depend on DMA selection the driver will update the +bits itself when you open or close. Loading a new table with the +interface open is not recommended. + +There are three standard configurations supported by the core code. In +PIO mode the interface is programmed up to use interrupt driven PIO. +This places high demands on the host processor to avoid latency. The +driver is written to take account of latency issues but it cannot avoid +latencies caused by other drivers, notably IDE in PIO mode. Because the +drivers allocate buffers you must also prevent MTU changes while the +port is open. + +Once the port is open it will call the rx_function of each channel +whenever a completed packet arrived. This is invoked from interrupt +context and passes you the channel and a network buffer (struct +sk_buff) holding the data. The data includes the CRC bytes so most +users will want to trim the last two bytes before processing the data. +This function is very timing critical. When you wish to simply discard +data the support code provides the function +:c:func:`z8530_null_rx()` to discard the data. + +To active PIO mode sending and receiving the `` + z8530_sync_open`` is called. This expects to be passed the network +device and the channel. Typically this is called from your network +device open callback. On a failure a non zero error status is returned. +The :c:func:`z8530_sync_close()` function shuts down a PIO +channel. This must be done before the channel is opened again and before +the driver shuts down and unloads. + +The ideal mode of operation is dual channel DMA mode. Here the kernel +driver will configure the board for DMA in both directions. The driver +also handles ISA DMA issues such as controller programming and the +memory range limit for you. This mode is activated by calling the +:c:func:`z8530_sync_dma_open()` function. On failure a non zero +error value is returned. Once this mode is activated it can be shut down +by calling the :c:func:`z8530_sync_dma_close()`. You must call +the close function matching the open mode you used. + +The final supported mode uses a single DMA channel to drive the transmit +side. As the Z85C30 has a larger FIFO on the receive channel this tends +to increase the maximum speed a little. This is activated by calling the +``z8530_sync_txdma_open + ``. This returns a non zero error code on failure. The +:c:func:`z8530_sync_txdma_close()` function closes down the Z8530 +interface from this mode. + +Network Layer Functions +======================= + +The Z8530 layer provides functions to queue packets for transmission. +The driver internally buffers the frame currently being transmitted and +one further frame (in order to keep back to back transmission running). +Any further buffering is up to the caller. + +The function :c:func:`z8530_queue_xmit()` takes a network buffer +in sk_buff format and queues it for transmission. The caller must +provide the entire packet with the exception of the bitstuffing and CRC. +This is normally done by the caller via the generic HDLC interface +layer. It returns 0 if the buffer has been queued and non zero values +for queue full. If the function accepts the buffer it becomes property +of the Z8530 layer and the caller should not free it. + +The function :c:func:`z8530_get_stats()` returns a pointer to an +internally maintained per interface statistics block. This provides most +of the interface code needed to implement the network layer get_stats +callback. + +Porting The Z8530 Driver +======================== + +The Z8530 driver is written to be portable. In DMA mode it makes +assumptions about the use of ISA DMA. These are probably warranted in +most cases as the Z85230 in particular was designed to glue to PC type +machines. The PIO mode makes no real assumptions. + +Should you need to retarget the Z8530 driver to another architecture the +only code that should need changing are the port I/O functions. At the +moment these assume PC I/O port accesses. This may not be appropriate +for all platforms. Replacing :c:func:`z8530_read_port()` and +``z8530_write_port + `` is intended to be all that is required to port this driver layer. + +Known Bugs And Assumptions +========================== + +Interrupt Locking + The locking in the driver is done via the global cli/sti lock. This + makes for relatively poor SMP performance. Switching this to use a + per device spin lock would probably materially improve performance. + +Occasional Failures + We have reports of occasional failures when run for very long + periods of time and the driver starts to receive junk frames. At the + moment the cause of this is not clear. + +Public Functions Provided +========================= + +.. kernel-doc:: drivers/net/wan/z85230.c + :export: + +Internal Functions +================== + +.. kernel-doc:: drivers/net/wan/z85230.c + :internal: |