diff options
| -rw-r--r-- | drivers/net/s2io.c | 135 | ||||
| -rw-r--r-- | drivers/net/s2io.h | 34 |
2 files changed, 150 insertions, 19 deletions
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 3ddc0aae60b6..9786de9c0248 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -458,7 +458,7 @@ MODULE_VERSION(DRV_VERSION); /* Module Loadable parameters. */ -S2IO_PARM_INT(tx_fifo_num, 1); +S2IO_PARM_INT(tx_fifo_num, FIFO_DEFAULT_NUM); S2IO_PARM_INT(rx_ring_num, 1); S2IO_PARM_INT(multiq, 0); S2IO_PARM_INT(rx_ring_mode, 1); @@ -470,6 +470,8 @@ S2IO_PARM_INT(shared_splits, 0); S2IO_PARM_INT(tmac_util_period, 5); S2IO_PARM_INT(rmac_util_period, 5); S2IO_PARM_INT(l3l4hdr_size, 128); +/* 0 is no steering, 1 is Priority steering, 2 is Default steering */ +S2IO_PARM_INT(tx_steering_type, TX_DEFAULT_STEERING); /* Frequency of Rx desc syncs expressed as power of 2 */ S2IO_PARM_INT(rxsync_frequency, 3); /* Interrupt type. Values can be 0(INTA), 2(MSI_X) */ @@ -4114,7 +4116,9 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) struct fifo_info *fifo = NULL; struct mac_info *mac_control; struct config_param *config; + int do_spin_lock = 1; int offload_type; + int enable_per_list_interrupt = 0; struct swStat *stats = &sp->mac_control.stats_info->sw_stat; mac_control = &sp->mac_control; @@ -4136,15 +4140,52 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) } queue = 0; - /* Get Fifo number to Transmit based on vlan priority */ if (sp->vlgrp && vlan_tx_tag_present(skb)) vlan_tag = vlan_tx_tag_get(skb); + if (sp->config.tx_steering_type == TX_DEFAULT_STEERING) { + if (skb->protocol == htons(ETH_P_IP)) { + struct iphdr *ip; + struct tcphdr *th; + ip = ip_hdr(skb); + + if ((ip->frag_off & htons(IP_OFFSET|IP_MF)) == 0) { + th = (struct tcphdr *)(((unsigned char *)ip) + + ip->ihl*4); + + if (ip->protocol == IPPROTO_TCP) { + queue_len = sp->total_tcp_fifos; + queue = (ntohs(th->source) + + ntohs(th->dest)) & + sp->fifo_selector[queue_len - 1]; + if (queue >= queue_len) + queue = queue_len - 1; + } else if (ip->protocol == IPPROTO_UDP) { + queue_len = sp->total_udp_fifos; + queue = (ntohs(th->source) + + ntohs(th->dest)) & + sp->fifo_selector[queue_len - 1]; + if (queue >= queue_len) + queue = queue_len - 1; + queue += sp->udp_fifo_idx; + if (skb->len > 1024) + enable_per_list_interrupt = 1; + do_spin_lock = 0; + } + } + } + } else if (sp->config.tx_steering_type == TX_PRIORITY_STEERING) + /* get fifo number based on skb->priority value */ + queue = config->fifo_mapping + [skb->priority & (MAX_TX_FIFOS - 1)]; + fifo = &mac_control->fifos[queue]; - /* get fifo number based on skb->priority value */ - queue = config->fifo_mapping[skb->priority & (MAX_TX_FIFOS - 1)]; + if (do_spin_lock) + spin_lock_irqsave(&fifo->tx_lock, flags); + else { + if (unlikely(!spin_trylock_irqsave(&fifo->tx_lock, flags))) + return NETDEV_TX_LOCKED; + } - fifo = &mac_control->fifos[queue]; - spin_lock_irqsave(&fifo->tx_lock, flags); #ifdef CONFIG_NETDEVICES_MULTIQUEUE if (sp->config.multiq) { if (__netif_subqueue_stopped(dev, fifo->fifo_no)) { @@ -4188,7 +4229,9 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) txdp->Control_1 |= TXD_GATHER_CODE_FIRST; txdp->Control_1 |= TXD_LIST_OWN_XENA; txdp->Control_2 |= TXD_INT_NUMBER(fifo->fifo_no); - + if (enable_per_list_interrupt) + if (put_off & (queue_len >> 5)) + txdp->Control_2 |= TXD_INT_TYPE_PER_LIST; if (vlan_tag) { txdp->Control_2 |= TXD_VLAN_ENABLE; txdp->Control_2 |= TXD_VLAN_TAG(vlan_tag); @@ -7622,13 +7665,15 @@ static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type, u8 *dev_multiq) { if ((tx_fifo_num > MAX_TX_FIFOS) || - (tx_fifo_num < FIFO_DEFAULT_NUM)) { + (tx_fifo_num < 1)) { DBG_PRINT(ERR_DBG, "s2io: Requested number of tx fifos " "(%d) not supported\n", tx_fifo_num); - tx_fifo_num = - ((tx_fifo_num > MAX_TX_FIFOS)? MAX_TX_FIFOS : - ((tx_fifo_num < FIFO_DEFAULT_NUM) ? FIFO_DEFAULT_NUM : - tx_fifo_num)); + + if (tx_fifo_num < 1) + tx_fifo_num = 1; + else + tx_fifo_num = MAX_TX_FIFOS; + DBG_PRINT(ERR_DBG, "s2io: Default to %d ", tx_fifo_num); DBG_PRINT(ERR_DBG, "tx fifos\n"); } @@ -7639,10 +7684,23 @@ static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type, multiq = 0; } #endif - /* if multiqueue is enabled configure all fifos */ - if (multiq) { - tx_fifo_num = MAX_TX_FIFOS; + if (multiq) *dev_multiq = multiq; + + if (tx_steering_type && (1 == tx_fifo_num)) { + if (tx_steering_type != TX_DEFAULT_STEERING) + DBG_PRINT(ERR_DBG, + "s2io: Tx steering is not supported with " + "one fifo. Disabling Tx steering.\n"); + tx_steering_type = NO_STEERING; + } + + if ((tx_steering_type < NO_STEERING) || + (tx_steering_type > TX_DEFAULT_STEERING)) { + DBG_PRINT(ERR_DBG, "s2io: Requested transmit steering not " + "supported\n"); + DBG_PRINT(ERR_DBG, "s2io: Disabling transmit steering\n"); + tx_steering_type = NO_STEERING; } if ( rx_ring_num > 8) { @@ -7773,7 +7831,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) } #ifdef CONFIG_NETDEVICES_MULTIQUEUE if (dev_multiq) - dev = alloc_etherdev_mq(sizeof(struct s2io_nic), MAX_TX_FIFOS); + dev = alloc_etherdev_mq(sizeof(struct s2io_nic), tx_fifo_num); else #endif dev = alloc_etherdev(sizeof(struct s2io_nic)); @@ -7824,11 +7882,33 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) config = &sp->config; config->napi = napi; + config->tx_steering_type = tx_steering_type; /* Tx side parameters. */ - config->tx_fifo_num = tx_fifo_num; + if (config->tx_steering_type == TX_PRIORITY_STEERING) + config->tx_fifo_num = MAX_TX_FIFOS; + else + config->tx_fifo_num = tx_fifo_num; + + /* Initialize the fifos used for tx steering */ + if (config->tx_fifo_num < 5) { + if (config->tx_fifo_num == 1) + sp->total_tcp_fifos = 1; + else + sp->total_tcp_fifos = config->tx_fifo_num - 1; + sp->udp_fifo_idx = config->tx_fifo_num - 1; + sp->total_udp_fifos = 1; + sp->other_fifo_idx = sp->total_tcp_fifos - 1; + } else { + sp->total_tcp_fifos = (tx_fifo_num - FIFO_UDP_MAX_NUM - + FIFO_OTHER_MAX_NUM); + sp->udp_fifo_idx = sp->total_tcp_fifos; + sp->total_udp_fifos = FIFO_UDP_MAX_NUM; + sp->other_fifo_idx = sp->udp_fifo_idx + FIFO_UDP_MAX_NUM; + } + config->multiq = dev_multiq; - for (i = 0; i < MAX_TX_FIFOS; i++) { + for (i = 0; i < config->tx_fifo_num; i++) { config->tx_cfg[i].fifo_len = tx_fifo_len[i]; config->tx_cfg[i].fifo_priority = i; } @@ -7837,6 +7917,11 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) for (i = 0; i < MAX_TX_FIFOS; i++) config->fifo_mapping[i] = fifo_map[config->tx_fifo_num - 1][i]; + /* map the hashing selector table to the configured fifos */ + for (i = 0; i < config->tx_fifo_num; i++) + sp->fifo_selector[i] = fifo_selector[i]; + + config->tx_intr_type = TXD_INT_TYPE_UTILZ; for (i = 0; i < config->tx_fifo_num; i++) { config->tx_cfg[i].f_no_snoop = @@ -8113,6 +8198,20 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) DBG_PRINT(ERR_DBG, "%s: Multiqueue support disabled\n", dev->name); + switch (sp->config.tx_steering_type) { + case NO_STEERING: + DBG_PRINT(ERR_DBG, "%s: No steering enabled for" + " transmit\n", dev->name); + break; + case TX_PRIORITY_STEERING: + DBG_PRINT(ERR_DBG, "%s: Priority steering enabled for" + " transmit\n", dev->name); + break; + case TX_DEFAULT_STEERING: + DBG_PRINT(ERR_DBG, "%s: Default steering enabled for" + " transmit\n", dev->name); + } + if (sp->lro) DBG_PRINT(ERR_DBG, "%s: Large receive offload enabled\n", dev->name); diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index fdc0a94d0a89..5e351c0879fa 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -360,7 +360,10 @@ struct stat_block { #define MAX_TX_FIFOS 8 #define MAX_RX_RINGS 8 -#define FIFO_DEFAULT_NUM 1 +#define FIFO_DEFAULT_NUM 5 +#define FIFO_UDP_MAX_NUM 2 /* 0 - even, 1 -odd ports */ +#define FIFO_OTHER_MAX_NUM 1 + #define MAX_RX_DESC_1 (MAX_RX_RINGS * MAX_RX_BLOCKS_PER_RING * 127 ) #define MAX_RX_DESC_2 (MAX_RX_RINGS * MAX_RX_BLOCKS_PER_RING * 85 ) @@ -379,6 +382,8 @@ static int fifo_map[][MAX_TX_FIFOS] = { {0, 1, 2, 3, 4, 5, 6, 7}, }; +static u16 fifo_selector[MAX_TX_FIFOS] = {0, 1, 3, 3, 7, 7, 7, 7}; + /* Maintains Per FIFO related information. */ struct tx_fifo_config { #define MAX_AVAILABLE_TXDS 8192 @@ -431,6 +436,12 @@ struct config_param { /* Tx Side */ u32 tx_fifo_num; /*Number of Tx FIFOs */ + /* 0-No steering, 1-Priority steering, 2-Default fifo map */ +#define NO_STEERING 0 +#define TX_PRIORITY_STEERING 0x1 +#define TX_DEFAULT_STEERING 0x2 + u8 tx_steering_type; + u8 fifo_mapping[MAX_TX_FIFOS]; struct tx_fifo_config tx_cfg[MAX_TX_FIFOS]; /*Per-Tx FIFO config */ u32 max_txds; /*Max no. of Tx buffer descriptor per TxDL */ @@ -895,6 +906,27 @@ struct s2io_nic { */ int rx_csum; + /* Below variables are used for fifo selection to transmit a packet */ + u16 fifo_selector[MAX_TX_FIFOS]; + + /* Total fifos for tcp packets */ + u8 total_tcp_fifos; + + /* + * Beginning index of udp for udp packets + * Value will be equal to + * (tx_fifo_num - FIFO_UDP_MAX_NUM - FIFO_OTHER_MAX_NUM) + */ + u8 udp_fifo_idx; + + u8 total_udp_fifos; + + /* + * Beginning index of fifo for all other packets + * Value will be equal to (tx_fifo_num - FIFO_OTHER_MAX_NUM) + */ + u8 other_fifo_idx; + /* after blink, the adapter must be restored with original * values. */ |