diff options
| -rw-r--r-- | Documentation/kernel-parameters.txt | 10 | ||||
| -rw-r--r-- | Documentation/power/basic-pm-debugging.txt | 4 | ||||
| -rw-r--r-- | arch/powerpc/configs/pmac32_defconfig | 1 | ||||
| -rw-r--r-- | drivers/serial/serial_core.c | 10 | ||||
| -rw-r--r-- | include/linux/console.h | 7 | ||||
| -rw-r--r-- | kernel/power/Kconfig | 11 | ||||
| -rw-r--r-- | kernel/printk.c | 16 |
7 files changed, 32 insertions, 27 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 98cf90f2631d..189df0bcab99 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -479,6 +479,16 @@ and is between 256 and 4096 characters. It is defined in the file UART at the specified I/O port or MMIO address. The options are the same as for ttyS, above. + no_console_suspend + [HW] Never suspend the console + Disable suspending of consoles during suspend and + hibernate operations. Once disabled, debugging + messages can reach various consoles while the rest + of the system is being put to sleep (ie, while + debugging driver suspend/resume hooks). This may + not work reliably with all consoles, but is known + to work with serial and VGA consoles. + cpcihp_generic= [HW,PCI] Generic port I/O CompactPCI driver Format: <first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>] diff --git a/Documentation/power/basic-pm-debugging.txt b/Documentation/power/basic-pm-debugging.txt index 1a85e2b964dc..57aef2f6e0de 100644 --- a/Documentation/power/basic-pm-debugging.txt +++ b/Documentation/power/basic-pm-debugging.txt @@ -78,8 +78,8 @@ c) Advanced debugging In case the STD does not work on your system even in the minimal configuration and compiling more drivers as modules is not practical or some modules cannot be unloaded, you can use one of the more advanced debugging techniques to find -the problem. First, if there is a serial port in your box, you can set the -CONFIG_DISABLE_CONSOLE_SUSPEND kernel configuration option and try to log kernel +the problem. First, if there is a serial port in your box, you can boot the +kernel with the 'no_console_suspend' parameter and try to log kernel messages using the serial console. This may provide you with some information about the reasons of the suspend (resume) failure. Alternatively, it may be possible to use a FireWire port for debugging with firescope diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig index 95b823b60c97..8e5988c4a164 100644 --- a/arch/powerpc/configs/pmac32_defconfig +++ b/arch/powerpc/configs/pmac32_defconfig @@ -209,7 +209,6 @@ CONFIG_PM=y # CONFIG_PM_LEGACY is not set CONFIG_PM_DEBUG=y # CONFIG_PM_VERBOSE is not set -# CONFIG_DISABLE_CONSOLE_SUSPEND is not set CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_HIBERNATION=y diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 68aa4da01865..103189095c80 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -1959,12 +1959,11 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *port) mutex_lock(&state->mutex); -#ifdef CONFIG_DISABLE_CONSOLE_SUSPEND - if (uart_console(port)) { + if (!console_suspend_enabled && uart_console(port)) { + /* we're going to avoid suspending serial console */ mutex_unlock(&state->mutex); return 0; } -#endif tty_dev = device_find_child(port->dev, &match, serial_match_port); if (device_may_wakeup(tty_dev)) { @@ -2016,12 +2015,11 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *port) mutex_lock(&state->mutex); -#ifdef CONFIG_DISABLE_CONSOLE_SUSPEND - if (uart_console(port)) { + if (!console_suspend_enabled && uart_console(port)) { + /* no need to resume serial console, it wasn't suspended */ mutex_unlock(&state->mutex); return 0; } -#endif if (!port->suspended) { disable_irq_wake(port->irq); diff --git a/include/linux/console.h b/include/linux/console.h index 0a4542ddb73d..a5f88a6a259d 100644 --- a/include/linux/console.h +++ b/include/linux/console.h @@ -122,14 +122,11 @@ extern void console_stop(struct console *); extern void console_start(struct console *); extern int is_console_locked(void); -#ifndef CONFIG_DISABLE_CONSOLE_SUSPEND +extern int console_suspend_enabled; + /* Suspend and resume console messages over PM events */ extern void suspend_console(void); extern void resume_console(void); -#else -static inline void suspend_console(void) {} -static inline void resume_console(void) {} -#endif /* CONFIG_DISABLE_CONSOLE_SUSPEND */ int mda_console_init(void); void prom_con_init(void); diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig index 14b0e10dc95c..8e186c678149 100644 --- a/kernel/power/Kconfig +++ b/kernel/power/Kconfig @@ -44,17 +44,6 @@ config PM_VERBOSE ---help--- This option enables verbose messages from the Power Management code. -config DISABLE_CONSOLE_SUSPEND - bool "Keep console(s) enabled during suspend/resume (DANGEROUS)" - depends on PM_DEBUG && PM_SLEEP - default n - ---help--- - This option turns off the console suspend mechanism that prevents - debug messages from reaching the console during the suspend/resume - operations. This may be helpful when debugging device drivers' - suspend/resume routines, but may itself lead to problems, for example - if netconsole is used. - config PM_TRACE bool "Suspend/resume event tracing" depends on PM_DEBUG && X86 && PM_SLEEP && EXPERIMENTAL diff --git a/kernel/printk.c b/kernel/printk.c index 52493474f0ab..a30fe33de395 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -862,7 +862,16 @@ int update_console_cmdline(char *name, int idx, char *name_new, int idx_new, cha return -1; } -#ifndef CONFIG_DISABLE_CONSOLE_SUSPEND +int console_suspend_enabled = 1; +EXPORT_SYMBOL(console_suspend_enabled); + +static int __init console_suspend_disable(char *str) +{ + console_suspend_enabled = 0; + return 1; +} +__setup("no_console_suspend", console_suspend_disable); + /** * suspend_console - suspend the console subsystem * @@ -870,6 +879,8 @@ int update_console_cmdline(char *name, int idx, char *name_new, int idx_new, cha */ void suspend_console(void) { + if (!console_suspend_enabled) + return; printk("Suspending console(s)\n"); acquire_console_sem(); console_suspended = 1; @@ -877,10 +888,11 @@ void suspend_console(void) void resume_console(void) { + if (!console_suspend_enabled) + return; console_suspended = 0; release_console_sem(); } -#endif /* CONFIG_DISABLE_CONSOLE_SUSPEND */ /** * acquire_console_sem - lock the console system for exclusive use. |