diff options
| -rw-r--r-- | drivers/hwmon/adm1026.c | 2 | ||||
| -rw-r--r-- | drivers/hwmon/max1619.c | 2 | ||||
| -rw-r--r-- | drivers/hwmon/pc87360.c | 2 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-i801.c | 6 |
4 files changed, 6 insertions, 6 deletions
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c index 3c85fe150cd7..4fa17c76eea2 100644 --- a/drivers/hwmon/adm1026.c +++ b/drivers/hwmon/adm1026.c @@ -393,7 +393,7 @@ void adm1026_init_client(struct i2c_client *client) value = data->config3; if (data->config3 & CFG3_GPIO16_ENABLE) { - dev_dbg(&client->dev, "GPIO16 enabled. THERM" + dev_dbg(&client->dev, "GPIO16 enabled. THERM " "pin disabled.\n"); } else { dev_dbg(&client->dev, "THERM pin enabled. " diff --git a/drivers/hwmon/max1619.c b/drivers/hwmon/max1619.c index bf553dcd97d6..3c159f1d49ee 100644 --- a/drivers/hwmon/max1619.c +++ b/drivers/hwmon/max1619.c @@ -363,7 +363,7 @@ static void __exit sensors_max1619_exit(void) i2c_del_driver(&max1619_driver); } -MODULE_AUTHOR("Alexey Fisher <fishor@mail.ru> and" +MODULE_AUTHOR("Alexey Fisher <fishor@mail.ru> and " "Jean Delvare <khali@linux-fr.org>"); MODULE_DESCRIPTION("MAX1619 sensor driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c index 876c68f3af31..fa4032d53b79 100644 --- a/drivers/hwmon/pc87360.c +++ b/drivers/hwmon/pc87360.c @@ -1043,7 +1043,7 @@ static void pc87360_init_client(struct i2c_client *client, int use_thermistors) if (init >= 2 && data->innr) { reg = pc87360_read_value(data, LD_IN, NO_BANK, PC87365_REG_IN_CONVRATE); - dev_info(&client->dev, "VLM conversion set to" + dev_info(&client->dev, "VLM conversion set to " "1s period, 160us delay\n"); pc87360_write_value(data, LD_IN, NO_BANK, PC87365_REG_IN_CONVRATE, diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 0ab7e37f5b00..1ab41313ce51 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -137,7 +137,7 @@ static int i801_setup(struct pci_dev *dev) pci_read_config_word(I801_dev, SMBBA, &i801_smba); i801_smba &= 0xfff0; if(i801_smba == 0) { - dev_err(&dev->dev, "SMB base address uninitialized" + dev_err(&dev->dev, "SMB base address uninitialized " "- upgrade BIOS or use force_addr=0xaddr\n"); return -ENODEV; } @@ -186,7 +186,7 @@ static int i801_transaction(void) int result = 0; int timeout = 0; - dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x," + dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x, " "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1)); @@ -240,7 +240,7 @@ static int i801_transaction(void) outb_p(inb(SMBHSTSTS), SMBHSTSTS); if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) { - dev_dbg(&I801_dev->dev, "Failed reset at end of transaction" + dev_dbg(&I801_dev->dev, "Failed reset at end of transaction " "(%02x)\n", temp); } dev_dbg(&I801_dev->dev, "Transaction (post): CNT=%02x, CMD=%02x, " |