summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/fb/ep93xx-fb.txt135
-rw-r--r--drivers/video/Kconfig11
-rw-r--r--drivers/video/Makefile1
-rw-r--r--drivers/video/ep93xx-fb.c646
4 files changed, 793 insertions, 0 deletions
diff --git a/Documentation/fb/ep93xx-fb.txt b/Documentation/fb/ep93xx-fb.txt
new file mode 100644
index 000000000000..5af1bd9effae
--- /dev/null
+++ b/Documentation/fb/ep93xx-fb.txt
@@ -0,0 +1,135 @@
+================================
+Driver for EP93xx LCD controller
+================================
+
+The EP93xx LCD controller can drive both standard desktop monitors and
+embedded LCD displays. If you have a standard desktop monitor then you
+can use the standard Linux video mode database. In your board file:
+
+ static struct ep93xxfb_mach_info some_board_fb_info = {
+ .num_modes = EP93XXFB_USE_MODEDB,
+ .bpp = 16,
+ };
+
+If you have an embedded LCD display then you need to define a video
+mode for it as follows:
+
+ static struct fb_videomode some_board_video_modes[] = {
+ {
+ .name = "some_lcd_name",
+ /* Pixel clock, porches, etc */
+ },
+ };
+
+Note that the pixel clock value is in pico-seconds. You can use the
+KHZ2PICOS macro to convert the pixel clock value. Most other values
+are in pixel clocks. See Documentation/fb/framebuffer.txt for further
+details.
+
+The ep93xxfb_mach_info structure for your board should look like the
+following:
+
+ static struct ep93xxfb_mach_info some_board_fb_info = {
+ .num_modes = ARRAY_SIZE(some_board_video_modes),
+ .modes = some_board_video_modes,
+ .default_mode = &some_board_video_modes[0],
+ .bpp = 16,
+ };
+
+The framebuffer device can be registered by adding the following to
+your board initialisation function:
+
+ ep93xx_register_fb(&some_board_fb_info);
+
+=====================
+Video Attribute Flags
+=====================
+
+The ep93xxfb_mach_info structure has a flags field which can be used
+to configure the controller. The video attributes flags are fully
+documented in section 7 of the EP93xx users' guide. The following
+flags are available:
+
+EP93XXFB_PCLK_FALLING Clock data on the falling edge of the
+ pixel clock. The default is to clock
+ data on the rising edge.
+
+EP93XXFB_SYNC_BLANK_HIGH Blank signal is active high. By
+ default the blank signal is active low.
+
+EP93XXFB_SYNC_HORIZ_HIGH Horizontal sync is active high. By
+ default the horizontal sync is active low.
+
+EP93XXFB_SYNC_VERT_HIGH Vertical sync is active high. By
+ default the vertical sync is active high.
+
+The physical address of the framebuffer can be controlled using the
+following flags:
+
+EP93XXFB_USE_SDCSN0 Use SDCSn[0] for the framebuffer. This
+ is the default setting.
+
+EP93XXFB_USE_SDCSN1 Use SDCSn[1] for the framebuffer.
+
+EP93XXFB_USE_SDCSN2 Use SDCSn[2] for the framebuffer.
+
+EP93XXFB_USE_SDCSN3 Use SDCSn[3] for the framebuffer.
+
+==================
+Platform callbacks
+==================
+
+The EP93xx framebuffer driver supports three optional platform
+callbacks: setup, teardown and blank. The setup and teardown functions
+are called when the framebuffer driver is installed and removed
+respectively. The blank function is called whenever the display is
+blanked or unblanked.
+
+The setup and teardown devices pass the platform_device structure as
+an argument. The fb_info and ep93xxfb_mach_info structures can be
+obtained as follows:
+
+ static int some_board_fb_setup(struct platform_device *pdev)
+ {
+ struct ep93xxfb_mach_info *mach_info = pdev->dev.platform_data;
+ struct fb_info *fb_info = platform_get_drvdata(pdev);
+
+ /* Board specific framebuffer setup */
+ }
+
+======================
+Setting the video mode
+======================
+
+The video mode is set using the following syntax:
+
+ video=XRESxYRES[-BPP][@REFRESH]
+
+If the EP93xx video driver is built-in then the video mode is set on
+the Linux kernel command line, for example:
+
+ video=ep93xx-fb:800x600-16@60
+
+If the EP93xx video driver is built as a module then the video mode is
+set when the module is installed:
+
+ modprobe ep93xx-fb video=320x240
+
+==============
+Screenpage bug
+==============
+
+At least on the EP9315 there is a silicon bug which causes bit 27 of
+the VIDSCRNPAGE (framebuffer physical offset) to be tied low. There is
+an unofficial errata for this bug at:
+ http://marc.info/?l=linux-arm-kernel&m=110061245502000&w=2
+
+By default the EP93xx framebuffer driver checks if the allocated physical
+address has bit 27 set. If it does, then the memory is freed and an
+error is returned. The check can be disabled by adding the following
+option when loading the driver:
+
+ ep93xx-fb.check_screenpage_bug=0
+
+In some cases it may be possible to reconfigure your SDRAM layout to
+avoid this bug. See section 13 of the EP93xx users' guide for details.
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index a7944ef48a2a..7be506262284 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2128,6 +2128,17 @@ config FB_MB862XX_LIME
---help---
Framebuffer support for Fujitsu Lime GDC on host CPU bus.
+config FB_EP93XX
+ tristate "EP93XX frame buffer support"
+ depends on FB && ARCH_EP93XX
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Framebuffer driver for the Cirrus Logic EP93XX series of processors.
+ This driver is also available as a module. The module will be called
+ ep93xx-fb.
+
config FB_PRE_INIT_FB
bool "Don't reinitialize, use bootloader's GDC/Display configuration"
depends on FB_MB862XX_LIME
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 85b2d2322dc7..80232e124889 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -85,6 +85,7 @@ obj-$(CONFIG_FB_Q40) += q40fb.o
obj-$(CONFIG_FB_TGA) += tgafb.o
obj-$(CONFIG_FB_HP300) += hpfb.o
obj-$(CONFIG_FB_G364) += g364fb.o
+obj-$(CONFIG_FB_EP93XX) += ep93xx-fb.o
obj-$(CONFIG_FB_SA1100) += sa1100fb.o
obj-$(CONFIG_FB_HIT) += hitfb.o
obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o
diff --git a/drivers/video/ep93xx-fb.c b/drivers/video/ep93xx-fb.c
new file mode 100644
index 000000000000..bd9d46f95291
--- /dev/null
+++ b/drivers/video/ep93xx-fb.c
@@ -0,0 +1,646 @@
+/*
+ * linux/drivers/video/ep93xx-fb.c
+ *
+ * Framebuffer support for the EP93xx series.
+ *
+ * Copyright (C) 2007 Bluewater Systems Ltd
+ * Author: Ryan Mallon <ryan@bluewatersys.com>
+ *
+ * Copyright (c) 2009 H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * Based on the Cirrus Logic ep93xxfb driver, and various other ep93xxfb
+ * drivers.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <linux/fb.h>
+
+#include <mach/fb.h>
+
+/* Vertical Frame Timing Registers */
+#define EP93XXFB_VLINES_TOTAL 0x0000 /* SW locked */
+#define EP93XXFB_VSYNC 0x0004 /* SW locked */
+#define EP93XXFB_VACTIVE 0x0008 /* SW locked */
+#define EP93XXFB_VBLANK 0x0228 /* SW locked */
+#define EP93XXFB_VCLK 0x000c /* SW locked */
+
+/* Horizontal Frame Timing Registers */
+#define EP93XXFB_HCLKS_TOTAL 0x0010 /* SW locked */
+#define EP93XXFB_HSYNC 0x0014 /* SW locked */
+#define EP93XXFB_HACTIVE 0x0018 /* SW locked */
+#define EP93XXFB_HBLANK 0x022c /* SW locked */
+#define EP93XXFB_HCLK 0x001c /* SW locked */
+
+/* Frame Buffer Memory Configuration Registers */
+#define EP93XXFB_SCREEN_PAGE 0x0028
+#define EP93XXFB_SCREEN_HPAGE 0x002c
+#define EP93XXFB_SCREEN_LINES 0x0030
+#define EP93XXFB_LINE_LENGTH 0x0034
+#define EP93XXFB_VLINE_STEP 0x0038
+#define EP93XXFB_LINE_CARRY 0x003c /* SW locked */
+#define EP93XXFB_EOL_OFFSET 0x0230
+
+/* Other Video Registers */
+#define EP93XXFB_BRIGHTNESS 0x0020
+#define EP93XXFB_ATTRIBS 0x0024 /* SW locked */
+#define EP93XXFB_SWLOCK 0x007c /* SW locked */
+#define EP93XXFB_AC_RATE 0x0214
+#define EP93XXFB_FIFO_LEVEL 0x0234
+#define EP93XXFB_PIXELMODE 0x0054
+#define EP93XXFB_PIXELMODE_32BPP (0x7 << 0)
+#define EP93XXFB_PIXELMODE_24BPP (0x6 << 0)
+#define EP93XXFB_PIXELMODE_16BPP (0x4 << 0)
+#define EP93XXFB_PIXELMODE_8BPP (0x2 << 0)
+#define EP93XXFB_PIXELMODE_SHIFT_1P_24B (0x0 << 3)
+#define EP93XXFB_PIXELMODE_SHIFT_1P_18B (0x1 << 3)
+#define EP93XXFB_PIXELMODE_COLOR_LUT (0x0 << 10)
+#define EP93XXFB_PIXELMODE_COLOR_888 (0x4 << 10)
+#define EP93XXFB_PIXELMODE_COLOR_555 (0x5 << 10)
+#define EP93XXFB_PARL_IF_OUT 0x0058
+#define EP93XXFB_PARL_IF_IN 0x005c
+
+/* Blink Control Registers */
+#define EP93XXFB_BLINK_RATE 0x0040
+#define EP93XXFB_BLINK_MASK 0x0044
+#define EP93XXFB_BLINK_PATTRN 0x0048
+#define EP93XXFB_PATTRN_MASK 0x004c
+#define EP93XXFB_BKGRND_OFFSET 0x0050
+
+/* Hardware Cursor Registers */
+#define EP93XXFB_CURSOR_ADR_START 0x0060
+#define EP93XXFB_CURSOR_ADR_RESET 0x0064
+#define EP93XXFB_CURSOR_SIZE 0x0068
+#define EP93XXFB_CURSOR_COLOR1 0x006c
+#define EP93XXFB_CURSOR_COLOR2 0x0070
+#define EP93XXFB_CURSOR_BLINK_COLOR1 0x021c
+#define EP93XXFB_CURSOR_BLINK_COLOR2 0x0220
+#define EP93XXFB_CURSOR_XY_LOC 0x0074
+#define EP93XXFB_CURSOR_DSCAN_HY_LOC 0x0078
+#define EP93XXFB_CURSOR_BLINK_RATE_CTRL 0x0224
+
+/* LUT Registers */
+#define EP93XXFB_GRY_SCL_LUTR 0x0080
+#define EP93XXFB_GRY_SCL_LUTG 0x0280
+#define EP93XXFB_GRY_SCL_LUTB 0x0300
+#define EP93XXFB_LUT_SW_CONTROL 0x0218
+#define EP93XXFB_LUT_SW_CONTROL_SWTCH (1 << 0)
+#define EP93XXFB_LUT_SW_CONTROL_SSTAT (1 << 1)
+#define EP93XXFB_COLOR_LUT 0x0400
+
+/* Video Signature Registers */
+#define EP93XXFB_VID_SIG_RSLT_VAL 0x0200
+#define EP93XXFB_VID_SIG_CTRL 0x0204
+#define EP93XXFB_VSIG 0x0208
+#define EP93XXFB_HSIG 0x020c
+#define EP93XXFB_SIG_CLR_STR 0x0210
+
+/* Minimum / Maximum resolutions supported */
+#define EP93XXFB_MIN_XRES 64
+#define EP93XXFB_MIN_YRES 64
+#define EP93XXFB_MAX_XRES 1024
+#define EP93XXFB_MAX_YRES 768
+
+struct ep93xx_fbi {
+ struct ep93xxfb_mach_info *mach_info;
+ struct clk *clk;
+ struct resource *res;
+ void __iomem *mmio_base;
+ unsigned int pseudo_palette[256];
+};
+
+static int check_screenpage_bug = 1;
+module_param(check_screenpage_bug, int, 0644);
+MODULE_PARM_DESC(check_screenpage_bug,
+ "Check for bit 27 screen page bug. Default = 1");
+
+static inline unsigned int ep93xxfb_readl(struct ep93xx_fbi *fbi,
+ unsigned int off)
+{
+ return __raw_readl(fbi->mmio_base + off);
+}
+
+static inline void ep93xxfb_writel(struct ep93xx_fbi *fbi,
+ unsigned int val, unsigned int off)
+{
+ __raw_writel(val, fbi->mmio_base + off);
+}
+
+/*
+ * Write to one of the locked raster registers.
+ */
+static inline void ep93xxfb_out_locked(struct ep93xx_fbi *fbi,
+ unsigned int val, unsigned int reg)
+{
+ /*
+ * We don't need a lock or delay here since the raster register
+ * block will remain unlocked until the next access.
+ */
+ ep93xxfb_writel(fbi, 0xaa, EP93XXFB_SWLOCK);
+ ep93xxfb_writel(fbi, val, reg);
+}
+
+static void ep93xxfb_set_video_attribs(struct fb_info *info)
+{
+ struct ep93xx_fbi *fbi = info->par;
+ unsigned int attribs;
+
+ attribs = EP93XXFB_ENABLE;
+ attribs |= fbi->mach_info->flags;
+ ep93xxfb_out_locked(fbi, attribs, EP93XXFB_ATTRIBS);
+}
+
+static int ep93xxfb_set_pixelmode(struct fb_info *info)
+{
+ struct ep93xx_fbi *fbi = info->par;
+ unsigned int val;
+
+ info->var.transp.offset = 0;
+ info->var.transp.length = 0;
+
+ switch (info->var.bits_per_pixel) {
+ case 8:
+ val = EP93XXFB_PIXELMODE_8BPP | EP93XXFB_PIXELMODE_COLOR_LUT |
+ EP93XXFB_PIXELMODE_SHIFT_1P_18B;
+
+ info->var.red.offset = 0;
+ info->var.red.length = 8;
+ info->var.green.offset = 0;
+ info->var.green.length = 8;
+ info->var.blue.offset = 0;
+ info->var.blue.length = 8;
+ info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+ break;
+
+ case 16:
+ val = EP93XXFB_PIXELMODE_16BPP | EP93XXFB_PIXELMODE_COLOR_555 |
+ EP93XXFB_PIXELMODE_SHIFT_1P_18B;
+
+ info->var.red.offset = 11;
+ info->var.red.length = 5;
+ info->var.green.offset = 5;
+ info->var.green.length = 6;
+ info->var.blue.offset = 0;
+ info->var.blue.length = 5;
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
+ break;
+
+ case 24:
+ val = EP93XXFB_PIXELMODE_24BPP | EP93XXFB_PIXELMODE_COLOR_888 |
+ EP93XXFB_PIXELMODE_SHIFT_1P_24B;
+
+ info->var.red.offset = 16;
+ info->var.red.length = 8;
+ info->var.green.offset = 8;
+ info->var.green.length = 8;
+ info->var.blue.offset = 0;
+ info->var.blue.length = 8;
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
+ break;
+
+ case 32:
+ val = EP93XXFB_PIXELMODE_32BPP | EP93XXFB_PIXELMODE_COLOR_888 |
+ EP93XXFB_PIXELMODE_SHIFT_1P_24B;
+
+ info->var.red.offset = 16;
+ info->var.red.length = 8;
+ info->var.green.offset = 8;
+ info->var.green.length = 8;
+ info->var.blue.offset = 0;
+ info->var.blue.length = 8;
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ ep93xxfb_writel(fbi, val, EP93XXFB_PIXELMODE);
+ return 0;
+}
+
+static void ep93xxfb_set_timing(struct fb_info *info)
+{
+ struct ep93xx_fbi *fbi = info->par;
+ unsigned int vlines_total, hclks_total, start, stop;
+
+ vlines_total = info->var.yres + info->var.upper_margin +
+ info->var.lower_margin + info->var.vsync_len - 1;
+
+ hclks_total = info->var.xres + info->var.left_margin +
+ info->var.right_margin + info->var.hsync_len - 1;
+
+ ep93xxfb_out_locked(fbi, vlines_total, EP93XXFB_VLINES_TOTAL);
+ ep93xxfb_out_locked(fbi, hclks_total, EP93XXFB_HCLKS_TOTAL);
+
+ start = vlines_total;
+ stop = vlines_total - info->var.vsync_len;
+ ep93xxfb_out_locked(fbi, start | (stop << 16), EP93XXFB_VSYNC);
+
+ start = vlines_total - info->var.vsync_len - info->var.upper_margin;
+ stop = info->var.lower_margin - 1;
+ ep93xxfb_out_locked(fbi, start | (stop << 16), EP93XXFB_VBLANK);
+ ep93xxfb_out_locked(fbi, start | (stop << 16), EP93XXFB_VACTIVE);
+
+ start = vlines_total;
+ stop = vlines_total + 1;
+ ep93xxfb_out_locked(fbi, start | (stop << 16), EP93XXFB_VCLK);
+
+ start = hclks_total;
+ stop = hclks_total - info->var.hsync_len;
+ ep93xxfb_out_locked(fbi, start | (stop << 16), EP93XXFB_HSYNC);
+
+ start = hclks_total - info->var.hsync_len - info->var.left_margin;
+ stop = info->var.right_margin - 1;
+ ep93xxfb_out_locked(fbi, start | (stop << 16), EP93XXFB_HBLANK);
+ ep93xxfb_out_locked(fbi, start | (stop << 16), EP93XXFB_HACTIVE);
+
+ start = hclks_total;
+ stop = hclks_total;
+ ep93xxfb_out_locked(fbi, start | (stop << 16), EP93XXFB_HCLK);
+
+ ep93xxfb_out_locked(fbi, 0x0, EP93XXFB_LINE_CARRY);
+}
+
+static int ep93xxfb_set_par(struct fb_info *info)
+{
+ struct ep93xx_fbi *fbi = info->par;
+
+ clk_set_rate(fbi->clk, 1000 * PICOS2KHZ(info->var.pixclock));
+
+ ep93xxfb_set_timing(info);
+
+ info->fix.line_length = info->var.xres_virtual *
+ info->var.bits_per_pixel / 8;
+
+ ep93xxfb_writel(fbi, info->fix.smem_start, EP93XXFB_SCREEN_PAGE);
+ ep93xxfb_writel(fbi, info->var.yres - 1, EP93XXFB_SCREEN_LINES);
+ ep93xxfb_writel(fbi, ((info->var.xres * info->var.bits_per_pixel)
+ / 32) - 1, EP93XXFB_LINE_LENGTH);
+ ep93xxfb_writel(fbi, info->fix.line_length / 4, EP93XXFB_VLINE_STEP);
+ ep93xxfb_set_video_attribs(info);
+ return 0;
+}
+
+static int ep93xxfb_check_var(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ int err;
+
+ err = ep93xxfb_set_pixelmode(info);
+ if (err)
+ return err;
+
+ var->xres = max_t(unsigned int, var->xres, EP93XXFB_MIN_XRES);
+ var->xres = min_t(unsigned int, var->xres, EP93XXFB_MAX_XRES);
+ var->xres_virtual = max(var->xres_virtual, var->xres);
+
+ var->yres = max_t(unsigned int, var->yres, EP93XXFB_MIN_YRES);
+ var->yres = min_t(unsigned int, var->yres, EP93XXFB_MAX_YRES);
+ var->yres_virtual = max(var->yres_virtual, var->yres);
+
+ return 0;
+}
+
+static int ep93xxfb_mmap(struct fb_info *info, struct vm_area_struct *vma)
+{
+ unsigned int offset = vma->vm_pgoff << PAGE_SHIFT;
+
+ if (offset < info->fix.smem_len) {
+ return dma_mmap_writecombine(info->dev, vma, info->screen_base,
+ info->fix.smem_start,
+ info->fix.smem_len);
+ }
+
+ return -EINVAL;
+}
+
+static int ep93xxfb_blank(int blank_mode, struct fb_info *info)
+{
+ struct ep93xx_fbi *fbi = info->par;
+ unsigned int attribs = ep93xxfb_readl(fbi, EP93XXFB_ATTRIBS);
+
+ if (blank_mode) {
+ if (fbi->mach_info->blank)
+ fbi->mach_info->blank(blank_mode, info);
+ ep93xxfb_out_locked(fbi, attribs & ~EP93XXFB_ENABLE,
+ EP93XXFB_ATTRIBS);
+ clk_disable(fbi->clk);
+ } else {
+ clk_enable(fbi->clk);
+ ep93xxfb_out_locked(fbi, attribs | EP93XXFB_ENABLE,
+ EP93XXFB_ATTRIBS);
+ if (fbi->mach_info->blank)
+ fbi->mach_info->blank(blank_mode, info);
+ }
+
+ return 0;
+}
+
+static inline int ep93xxfb_convert_color(int val, int width)
+{
+ return ((val << width) + 0x7fff - val) >> 16;
+}
+
+static int ep93xxfb_setcolreg(unsigned int regno, unsigned int red,
+ unsigned int green, unsigned int blue,
+ unsigned int transp, struct fb_info *info)
+{
+ struct ep93xx_fbi *fbi = info->par;
+ unsigned int *pal = info->pseudo_palette;
+ unsigned int ctrl, i, rgb, lut_current, lut_stat;
+
+ switch (info->fix.visual) {
+ case FB_VISUAL_PSEUDOCOLOR:
+ rgb = ((red & 0xff00) << 8) | (green & 0xff00) |
+ ((blue & 0xff00) >> 8);
+
+ pal[regno] = rgb;
+ ep93xxfb_writel(fbi, rgb, (EP93XXFB_COLOR_LUT + (regno << 2)));
+ ctrl = ep93xxfb_readl(fbi, EP93XXFB_LUT_SW_CONTROL);
+ lut_stat = !!(ctrl & EP93XXFB_LUT_SW_CONTROL_SSTAT);
+ lut_current = !!(ctrl & EP93XXFB_LUT_SW_CONTROL_SWTCH);
+
+ if (lut_stat == lut_current) {
+ for (i = 0; i < 256; i++) {
+ ep93xxfb_writel(fbi, pal[i],
+ EP93XXFB_COLOR_LUT + (i << 2));
+ }
+
+ ep93xxfb_writel(fbi,
+ ctrl ^ EP93XXFB_LUT_SW_CONTROL_SWTCH,
+ EP93XXFB_LUT_SW_CONTROL);
+ }
+ break;
+
+ case FB_VISUAL_TRUECOLOR:
+ if (regno > 16)
+ return 1;
+
+ red = ep93xxfb_convert_color(red, info->var.red.length);
+ green = ep93xxfb_convert_color(green, info->var.green.length);
+ blue = ep93xxfb_convert_color(blue, info->var.blue.length);
+ transp = ep93xxfb_convert_color(transp,
+ info->var.transp.length);
+
+ pal[regno] = (red << info->var.red.offset) |
+ (green << info->var.green.offset) |
+ (blue << info->var.blue.offset) |
+ (transp << info->var.transp.offset);
+ break;
+
+ default:
+ return 1;
+ }
+
+ return 0;
+}
+
+static struct fb_ops ep93xxfb_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = ep93xxfb_check_var,
+ .fb_set_par = ep93xxfb_set_par,
+ .fb_blank = ep93xxfb_blank,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+ .fb_setcolreg = ep93xxfb_setcolreg,
+ .fb_mmap = ep93xxfb_mmap,
+};
+
+static int __init ep93xxfb_calc_fbsize(struct ep93xxfb_mach_info *mach_info)
+{
+ int i, fb_size = 0;
+
+ if (mach_info->num_modes == EP93XXFB_USE_MODEDB) {
+ fb_size = EP93XXFB_MAX_XRES * EP93XXFB_MAX_YRES *
+ mach_info->bpp / 8;
+ } else {
+ for (i = 0; i < mach_info->num_modes; i++) {
+ const struct fb_videomode *mode;
+ int size;
+
+ mode = &mach_info->modes[i];
+ size = mode->xres * mode->yres * mach_info->bpp / 8;
+ if (size > fb_size)
+ fb_size = size;
+ }
+ }
+
+ return fb_size;
+}
+
+static int __init ep93xxfb_alloc_videomem(struct fb_info *info)
+{
+ struct ep93xx_fbi *fbi = info->par;
+ char __iomem *virt_addr;
+ dma_addr_t phys_addr;
+ unsigned int fb_size;
+
+ fb_size = ep93xxfb_calc_fbsize(fbi->mach_info);
+ virt_addr = dma_alloc_writecombine(info->dev, fb_size,
+ &phys_addr, GFP_KERNEL);
+ if (!virt_addr)
+ return -ENOMEM;
+
+ /*
+ * There is a bug in the ep93xx framebuffer which causes problems
+ * if bit 27 of the physical address is set.
+ * See: http://marc.info/?l=linux-arm-kernel&m=110061245502000&w=2
+ * There does not seem to be any offical errata for this, but I
+ * have confirmed the problem exists on my hardware (ep9315) at
+ * least.
+ */
+ if (check_screenpage_bug && phys_addr & (1 << 27)) {
+ dev_err(info->dev, "ep93xx framebuffer bug. phys addr (0x%x) "
+ "has bit 27 set: cannot init framebuffer\n",
+ phys_addr);
+
+ dma_free_coherent(info->dev, fb_size, virt_addr, phys_addr);
+ return -ENOMEM;
+ }
+
+ info->fix.smem_start = phys_addr;
+ info->fix.smem_len = fb_size;
+ info->screen_base = virt_addr;
+
+ return 0;
+}
+
+static void ep93xxfb_dealloc_videomem(struct fb_info *info)
+{
+ if (info->screen_base)
+ dma_free_coherent(info->dev, info->fix.smem_len,
+ info->screen_base, info->fix.smem_start);
+}
+
+static int __init ep93xxfb_probe(struct platform_device *pdev)
+{
+ struct ep93xxfb_mach_info *mach_info = pdev->dev.platform_data;
+ struct fb_info *info;
+ struct ep93xx_fbi *fbi;
+ struct resource *res;
+ char *video_mode;
+ int err;
+
+ if (!mach_info)
+ return -EINVAL;
+
+ info = framebuffer_alloc(sizeof(struct ep93xx_fbi), &pdev->dev);
+ if (!info)
+ return -ENOMEM;
+
+ info->dev = &pdev->dev;
+ platform_set_drvdata(pdev, info);
+ fbi = info->par;
+ fbi->mach_info = mach_info;
+
+ err = fb_alloc_cmap(&info->cmap, 256, 0);
+ if (err)
+ goto failed;
+
+ err = ep93xxfb_alloc_videomem(info);
+ if (err)
+ goto failed;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ err = -ENXIO;
+ goto failed;
+ }
+
+ res = request_mem_region(res->start, resource_size(res), pdev->name);
+ if (!res) {
+ err = -EBUSY;
+ goto failed;
+ }
+
+ fbi->res = res;
+ fbi->mmio_base = ioremap(res->start, resource_size(res));
+ if (!fbi->mmio_base) {
+ err = -ENXIO;
+ goto failed;
+ }
+
+ strcpy(info->fix.id, pdev->name);
+ info->fbops = &ep93xxfb_ops;
+ info->fix.type = FB_TYPE_PACKED_PIXELS;
+ info->fix.accel = FB_ACCEL_NONE;
+ info->var.activate = FB_ACTIVATE_NOW;
+ info->var.vmode = FB_VMODE_NONINTERLACED;
+ info->flags = FBINFO_DEFAULT;
+ info->node = -1;
+ info->state = FBINFO_STATE_RUNNING;
+ info->pseudo_palette = &fbi->pseudo_palette;
+
+ fb_get_options("ep93xx-fb", &video_mode);
+ err = fb_find_mode(&info->var, info, video_mode,
+ fbi->mach_info->modes, fbi->mach_info->num_modes,
+ fbi->mach_info->default_mode, fbi->mach_info->bpp);
+ if (err == 0) {
+ dev_err(info->dev, "No suitable video mode found\n");
+ err = -EINVAL;
+ goto failed;
+ }
+
+ if (mach_info->setup) {
+ err = mach_info->setup(pdev);
+ if (err)
+ return err;
+ }
+
+ err = ep93xxfb_check_var(&info->var, info);
+ if (err)
+ goto failed;
+
+ fbi->clk = clk_get(info->dev, NULL);
+ if (IS_ERR(fbi->clk)) {
+ err = PTR_ERR(fbi->clk);
+ fbi->clk = NULL;
+ goto failed;
+ }
+
+ ep93xxfb_set_par(info);
+ clk_enable(fbi->clk);
+
+ err = register_framebuffer(info);
+ if (err)
+ goto failed;
+
+ dev_info(info->dev, "registered. Mode = %dx%d-%d\n",
+ info->var.xres, info->var.yres, info->var.bits_per_pixel);
+ return 0;
+
+failed:
+ if (fbi->clk)
+ clk_put(fbi->clk);
+ if (fbi->mmio_base)
+ iounmap(fbi->mmio_base);
+ if (fbi->res)
+ release_mem_region(fbi->res->start, resource_size(fbi->res));
+ ep93xxfb_dealloc_videomem(info);
+ if (&info->cmap)
+ fb_dealloc_cmap(&info->cmap);
+ if (fbi->mach_info->teardown)
+ fbi->mach_info->teardown(pdev);
+ kfree(info);
+ platform_set_drvdata(pdev, NULL);
+
+ return err;
+}
+
+static int ep93xxfb_remove(struct platform_device *pdev)
+{
+ struct fb_info *info = platform_get_drvdata(pdev);
+ struct ep93xx_fbi *fbi = info->par;
+
+ unregister_framebuffer(info);
+ clk_disable(fbi->clk);
+ clk_put(fbi->clk);
+ iounmap(fbi->mmio_base);
+ release_mem_region(fbi->res->start, resource_size(fbi->res));
+ ep93xxfb_dealloc_videomem(info);
+ fb_dealloc_cmap(&info->cmap);
+
+ if (fbi->mach_info->teardown)
+ fbi->mach_info->teardown(pdev);
+
+ kfree(info);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver ep93xxfb_driver = {
+ .probe = ep93xxfb_probe,
+ .remove = ep93xxfb_remove,
+ .driver = {
+ .name = "ep93xx-fb",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __devinit ep93xxfb_init(void)
+{
+ return platform_driver_register(&ep93xxfb_driver);
+}
+
+static void __exit ep93xxfb_exit(void)
+{
+ platform_driver_unregister(&ep93xxfb_driver);
+}
+
+module_init(ep93xxfb_init);
+module_exit(ep93xxfb_exit);
+
+MODULE_DESCRIPTION("EP93XX Framebuffer Driver");
+MODULE_ALIAS("platform:ep93xx-fb");
+MODULE_AUTHOR("Ryan Mallon <ryan&bluewatersys.com>, "
+ "H Hartley Sweeten <hsweeten@visionengravers.com");
+MODULE_LICENSE("GPL");