summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--MAINTAINERS4
-rw-r--r--arch/arm/Kconfig1
-rw-r--r--arch/arm/mach-spear3xx/Makefile2
-rw-r--r--arch/arm/mach-spear3xx/clock.c760
-rw-r--r--arch/arm/mach-spear3xx/include/mach/generic.h3
-rw-r--r--arch/arm/mach-spear3xx/include/mach/misc_regs.h144
-rw-r--r--arch/arm/mach-spear3xx/include/mach/spear.h13
-rw-r--r--arch/arm/mach-spear3xx/spear320.c1
-rw-r--r--arch/arm/mach-spear3xx/spear3xx.c2
-rw-r--r--arch/arm/mach-spear6xx/Makefile2
-rw-r--r--arch/arm/mach-spear6xx/clock.c683
-rw-r--r--arch/arm/mach-spear6xx/include/mach/misc_regs.h154
-rw-r--r--arch/arm/mach-spear6xx/spear6xx.c5
-rw-r--r--arch/arm/plat-spear/Makefile2
-rw-r--r--arch/arm/plat-spear/clock.c1005
-rw-r--r--arch/arm/plat-spear/include/plat/clock.h249
-rw-r--r--arch/arm/plat-spear/time.c8
-rw-r--r--drivers/clk/Makefile3
-rw-r--r--drivers/clk/spear/Makefile8
-rw-r--r--drivers/clk/spear/clk-aux-synth.c198
-rw-r--r--drivers/clk/spear/clk-frac-synth.c165
-rw-r--r--drivers/clk/spear/clk-gpt-synth.c154
-rw-r--r--drivers/clk/spear/clk-vco-pll.c363
-rw-r--r--drivers/clk/spear/clk.c36
-rw-r--r--drivers/clk/spear/clk.h134
-rw-r--r--drivers/clk/spear/spear3xx_clock.c612
-rw-r--r--drivers/clk/spear/spear6xx_clock.c342
27 files changed, 2044 insertions, 3009 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 1baf9be3f8dd..b7adeed338d4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6334,9 +6334,7 @@ L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
S: Maintained
-F: arch/arm/mach-spear*/clock.c
-F: arch/arm/plat-spear/clock.c
-F: arch/arm/plat-spear/include/plat/clock.h
+F: drivers/clk/spear/
SPEAR PAD MULTIPLEXING SUPPORT
M: Viresh Kumar <viresh.kumar@st.com>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2095a513a7c0..40ba2d1acde2 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -981,6 +981,7 @@ config PLAT_SPEAR
select ARM_AMBA
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
+ select COMMON_CLK
select CLKSRC_MMIO
select GENERIC_CLOCKEVENTS
select HAVE_CLK
diff --git a/arch/arm/mach-spear3xx/Makefile b/arch/arm/mach-spear3xx/Makefile
index b24862489704..5b30d0d10892 100644
--- a/arch/arm/mach-spear3xx/Makefile
+++ b/arch/arm/mach-spear3xx/Makefile
@@ -3,7 +3,7 @@
#
# common files
-obj-y += spear3xx.o clock.o
+obj-y += spear3xx.o
# spear300 specific files
obj-$(CONFIG_MACH_SPEAR300) += spear300.o
diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c
deleted file mode 100644
index 6c4841f55223..000000000000
--- a/arch/arm/mach-spear3xx/clock.c
+++ /dev/null
@@ -1,760 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/clock.c
- *
- * SPEAr3xx machines clock framework source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <asm/mach-types.h>
-#include <plat/clock.h>
-#include <mach/misc_regs.h>
-
-/* root clks */
-/* 32 KHz oscillator clock */
-static struct clk osc_32k_clk = {
- .flags = ALWAYS_ENABLED,
- .rate = 32000,
-};
-
-/* 24 MHz oscillator clock */
-static struct clk osc_24m_clk = {
- .flags = ALWAYS_ENABLED,
- .rate = 24000000,
-};
-
-/* clock derived from 32 KHz osc clk */
-/* rtc clock */
-static struct clk rtc_clk = {
- .pclk = &osc_32k_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = RTC_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* clock derived from 24 MHz osc clk */
-/* pll masks structure */
-static struct pll_clk_masks pll1_masks = {
- .mode_mask = PLL_MODE_MASK,
- .mode_shift = PLL_MODE_SHIFT,
- .norm_fdbk_m_mask = PLL_NORM_FDBK_M_MASK,
- .norm_fdbk_m_shift = PLL_NORM_FDBK_M_SHIFT,
- .dith_fdbk_m_mask = PLL_DITH_FDBK_M_MASK,
- .dith_fdbk_m_shift = PLL_DITH_FDBK_M_SHIFT,
- .div_p_mask = PLL_DIV_P_MASK,
- .div_p_shift = PLL_DIV_P_SHIFT,
- .div_n_mask = PLL_DIV_N_MASK,
- .div_n_shift = PLL_DIV_N_SHIFT,
-};
-
-/* pll1 configuration structure */
-static struct pll_clk_config pll1_config = {
- .mode_reg = PLL1_CTR,
- .cfg_reg = PLL1_FRQ,
- .masks = &pll1_masks,
-};
-
-/* pll rate configuration table, in ascending order of rates */
-struct pll_rate_tbl pll_rtbl[] = {
- {.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */
- {.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */
-};
-
-/* PLL1 clock */
-static struct clk pll1_clk = {
- .flags = ENABLED_ON_INIT,
- .pclk = &osc_24m_clk,
- .en_reg = PLL1_CTR,
- .en_reg_bit = PLL_ENABLE,
- .calc_rate = &pll_calc_rate,
- .recalc = &pll_clk_recalc,
- .set_rate = &pll_clk_set_rate,
- .rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1},
- .private_data = &pll1_config,
-};
-
-/* PLL3 48 MHz clock */
-static struct clk pll3_48m_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &osc_24m_clk,
- .rate = 48000000,
-};
-
-/* watch dog timer clock */
-static struct clk wdt_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &osc_24m_clk,
- .recalc = &follow_parent,
-};
-
-/* clock derived from pll1 clk */
-/* cpu clock */
-static struct clk cpu_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll1_clk,
- .recalc = &follow_parent,
-};
-
-/* ahb masks structure */
-static struct bus_clk_masks ahb_masks = {
- .mask = PLL_HCLK_RATIO_MASK,
- .shift = PLL_HCLK_RATIO_SHIFT,
-};
-
-/* ahb configuration structure */
-static struct bus_clk_config ahb_config = {
- .reg = CORE_CLK_CFG,
- .masks = &ahb_masks,
-};
-
-/* ahb rate configuration table, in ascending order of rates */
-struct bus_rate_tbl bus_rtbl[] = {
- {.div = 3}, /* == parent divided by 4 */
- {.div = 2}, /* == parent divided by 3 */
- {.div = 1}, /* == parent divided by 2 */
- {.div = 0}, /* == parent divided by 1 */
-};
-
-/* ahb clock */
-static struct clk ahb_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll1_clk,
- .calc_rate = &bus_calc_rate,
- .recalc = &bus_clk_recalc,
- .set_rate = &bus_clk_set_rate,
- .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
- .private_data = &ahb_config,
-};
-
-/* auxiliary synthesizers masks */
-static struct aux_clk_masks aux_masks = {
- .eq_sel_mask = AUX_EQ_SEL_MASK,
- .eq_sel_shift = AUX_EQ_SEL_SHIFT,
- .eq1_mask = AUX_EQ1_SEL,
- .eq2_mask = AUX_EQ2_SEL,
- .xscale_sel_mask = AUX_XSCALE_MASK,
- .xscale_sel_shift = AUX_XSCALE_SHIFT,
- .yscale_sel_mask = AUX_YSCALE_MASK,
- .yscale_sel_shift = AUX_YSCALE_SHIFT,
-};
-
-/* uart synth configurations */
-static struct aux_clk_config uart_synth_config = {
- .synth_reg = UART_CLK_SYNT,
- .masks = &aux_masks,
-};
-
-/* aux rate configuration table, in ascending order of rates */
-struct aux_rate_tbl aux_rtbl[] = {
- /* For PLL1 = 332 MHz */
- {.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */
- {.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */
- {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
-};
-
-/* uart synth clock */
-static struct clk uart_synth_clk = {
- .en_reg = UART_CLK_SYNT,
- .en_reg_bit = AUX_SYNT_ENB,
- .pclk = &pll1_clk,
- .calc_rate = &aux_calc_rate,
- .recalc = &aux_clk_recalc,
- .set_rate = &aux_clk_set_rate,
- .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1},
- .private_data = &uart_synth_config,
-};
-
-/* uart parents */
-static struct pclk_info uart_pclk_info[] = {
- {
- .pclk = &uart_synth_clk,
- .pclk_val = AUX_CLK_PLL1_VAL,
- }, {
- .pclk = &pll3_48m_clk,
- .pclk_val = AUX_CLK_PLL3_VAL,
- },
-};
-
-/* uart parent select structure */
-static struct pclk_sel uart_pclk_sel = {
- .pclk_info = uart_pclk_info,
- .pclk_count = ARRAY_SIZE(uart_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = UART_CLK_MASK,
-};
-
-/* uart clock */
-static struct clk uart_clk = {
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = UART_CLK_ENB,
- .pclk_sel = &uart_pclk_sel,
- .pclk_sel_shift = UART_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* firda configurations */
-static struct aux_clk_config firda_synth_config = {
- .synth_reg = FIRDA_CLK_SYNT,
- .masks = &aux_masks,
-};
-
-/* firda synth clock */
-static struct clk firda_synth_clk = {
- .en_reg = FIRDA_CLK_SYNT,
- .en_reg_bit = AUX_SYNT_ENB,
- .pclk = &pll1_clk,
- .calc_rate = &aux_calc_rate,
- .recalc = &aux_clk_recalc,
- .set_rate = &aux_clk_set_rate,
- .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1},
- .private_data = &firda_synth_config,
-};
-
-/* firda parents */
-static struct pclk_info firda_pclk_info[] = {
- {
- .pclk = &firda_synth_clk,
- .pclk_val = AUX_CLK_PLL1_VAL,
- }, {
- .pclk = &pll3_48m_clk,
- .pclk_val = AUX_CLK_PLL3_VAL,
- },
-};
-
-/* firda parent select structure */
-static struct pclk_sel firda_pclk_sel = {
- .pclk_info = firda_pclk_info,
- .pclk_count = ARRAY_SIZE(firda_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = FIRDA_CLK_MASK,
-};
-
-/* firda clock */
-static struct clk firda_clk = {
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = FIRDA_CLK_ENB,
- .pclk_sel = &firda_pclk_sel,
- .pclk_sel_shift = FIRDA_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* gpt synthesizer masks */
-static struct gpt_clk_masks gpt_masks = {
- .mscale_sel_mask = GPT_MSCALE_MASK,
- .mscale_sel_shift = GPT_MSCALE_SHIFT,
- .nscale_sel_mask = GPT_NSCALE_MASK,
- .nscale_sel_shift = GPT_NSCALE_SHIFT,
-};
-
-/* gpt rate configuration table, in ascending order of rates */
-struct gpt_rate_tbl gpt_rtbl[] = {
- /* For pll1 = 332 MHz */
- {.mscale = 4, .nscale = 0}, /* 41.5 MHz */
- {.mscale = 2, .nscale = 0}, /* 55.3 MHz */
- {.mscale = 1, .nscale = 0}, /* 83 MHz */
-};
-
-/* gpt0 synth clk config*/
-static struct gpt_clk_config gpt0_synth_config = {
- .synth_reg = PRSC1_CLK_CFG,
- .masks = &gpt_masks,
-};
-
-/* gpt synth clock */
-static struct clk gpt0_synth_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll1_clk,
- .calc_rate = &gpt_calc_rate,
- .recalc = &gpt_clk_recalc,
- .set_rate = &gpt_clk_set_rate,
- .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
- .private_data = &gpt0_synth_config,
-};
-
-/* gpt parents */
-static struct pclk_info gpt0_pclk_info[] = {
- {
- .pclk = &gpt0_synth_clk,
- .pclk_val = AUX_CLK_PLL1_VAL,
- }, {
- .pclk = &pll3_48m_clk,
- .pclk_val = AUX_CLK_PLL3_VAL,
- },
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt0_pclk_sel = {
- .pclk_info = gpt0_pclk_info,
- .pclk_count = ARRAY_SIZE(gpt0_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt0 timer clock */
-static struct clk gpt0_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk_sel = &gpt0_pclk_sel,
- .pclk_sel_shift = GPT0_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* gpt1 synth clk configurations */
-static struct gpt_clk_config gpt1_synth_config = {
- .synth_reg = PRSC2_CLK_CFG,
- .masks = &gpt_masks,
-};
-
-/* gpt1 synth clock */
-static struct clk gpt1_synth_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll1_clk,
- .calc_rate = &gpt_calc_rate,
- .recalc = &gpt_clk_recalc,
- .set_rate = &gpt_clk_set_rate,
- .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
- .private_data = &gpt1_synth_config,
-};
-
-static struct pclk_info gpt1_pclk_info[] = {
- {
- .pclk = &gpt1_synth_clk,
- .pclk_val = AUX_CLK_PLL1_VAL,
- }, {
- .pclk = &pll3_48m_clk,
- .pclk_val = AUX_CLK_PLL3_VAL,
- },
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt1_pclk_sel = {
- .pclk_info = gpt1_pclk_info,
- .pclk_count = ARRAY_SIZE(gpt1_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt1 timer clock */
-static struct clk gpt1_clk = {
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = GPT1_CLK_ENB,
- .pclk_sel = &gpt1_pclk_sel,
- .pclk_sel_shift = GPT1_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* gpt2 synth clk configurations */
-static struct gpt_clk_config gpt2_synth_config = {
- .synth_reg = PRSC3_CLK_CFG,
- .masks = &gpt_masks,
-};
-
-/* gpt1 synth clock */
-static struct clk gpt2_synth_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll1_clk,
- .calc_rate = &gpt_calc_rate,
- .recalc = &gpt_clk_recalc,
- .set_rate = &gpt_clk_set_rate,
- .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
- .private_data = &gpt2_synth_config,
-};
-
-static struct pclk_info gpt2_pclk_info[] = {
- {
- .pclk = &gpt2_synth_clk,
- .pclk_val = AUX_CLK_PLL1_VAL,
- }, {
- .pclk = &pll3_48m_clk,
- .pclk_val = AUX_CLK_PLL3_VAL,
- },
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt2_pclk_sel = {
- .pclk_info = gpt2_pclk_info,
- .pclk_count = ARRAY_SIZE(gpt2_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt2 timer clock */
-static struct clk gpt2_clk = {
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = GPT2_CLK_ENB,
- .pclk_sel = &gpt2_pclk_sel,
- .pclk_sel_shift = GPT2_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* clock derived from pll3 clk */
-/* usbh clock */
-static struct clk usbh_clk = {
- .pclk = &pll3_48m_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = USBH_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* usbd clock */
-static struct clk usbd_clk = {
- .pclk = &pll3_48m_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = USBD_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* clock derived from ahb clk */
-/* apb masks structure */
-static struct bus_clk_masks apb_masks = {
- .mask = HCLK_PCLK_RATIO_MASK,
- .shift = HCLK_PCLK_RATIO_SHIFT,
-};
-
-/* apb configuration structure */
-static struct bus_clk_config apb_config = {
- .reg = CORE_CLK_CFG,
- .masks = &apb_masks,
-};
-
-/* apb clock */
-static struct clk apb_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &ahb_clk,
- .calc_rate = &bus_calc_rate,
- .recalc = &bus_clk_recalc,
- .set_rate = &bus_clk_set_rate,
- .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
- .private_data = &apb_config,
-};
-
-/* i2c clock */
-static struct clk i2c_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = I2C_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* dma clock */
-static struct clk dma_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = DMA_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* jpeg clock */
-static struct clk jpeg_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = JPEG_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* gmac clock */
-static struct clk gmac_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = GMAC_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* smi clock */
-static struct clk smi_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = SMI_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* c3 clock */
-static struct clk c3_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = C3_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* clock derived from apb clk */
-/* adc clock */
-static struct clk adc_clk = {
- .pclk = &apb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = ADC_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-/* emi clock */
-static struct clk emi_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &ahb_clk,
- .recalc = &follow_parent,
-};
-#endif
-
-/* ssp clock */
-static struct clk ssp0_clk = {
- .pclk = &apb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = SSP_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* gpio clock */
-static struct clk gpio_clk = {
- .pclk = &apb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = GPIO_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-static struct clk dummy_apb_pclk;
-
-#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR310) || \
- defined(CONFIG_MACH_SPEAR320)
-/* fsmc clock */
-static struct clk fsmc_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &ahb_clk,
- .recalc = &follow_parent,
-};
-#endif
-
-/* common clocks to spear310 and spear320 */
-#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-/* uart1 clock */
-static struct clk uart1_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-
-/* uart2 clock */
-static struct clk uart2_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */
-
-/* common clocks to spear300 and spear320 */
-#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR320)
-/* clcd clock */
-static struct clk clcd_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll3_48m_clk,
- .recalc = &follow_parent,
-};
-
-/* sdhci clock */
-static struct clk sdhci_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &ahb_clk,
- .recalc = &follow_parent,
-};
-#endif /* CONFIG_MACH_SPEAR300 || CONFIG_MACH_SPEAR320 */
-
-/* spear300 machine specific clock structures */
-#ifdef CONFIG_MACH_SPEAR300
-/* gpio1 clock */
-static struct clk gpio1_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-
-/* keyboard clock */
-static struct clk kbd_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-
-#endif
-
-/* spear310 machine specific clock structures */
-#ifdef CONFIG_MACH_SPEAR310
-/* uart3 clock */
-static struct clk uart3_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-
-/* uart4 clock */
-static struct clk uart4_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-
-/* uart5 clock */
-static struct clk uart5_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-#endif
-
-/* spear320 machine specific clock structures */
-#ifdef CONFIG_MACH_SPEAR320
-/* can0 clock */
-static struct clk can0_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-
-/* can1 clock */
-static struct clk can1_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-
-/* i2c1 clock */
-static struct clk i2c1_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &ahb_clk,
- .recalc = &follow_parent,
-};
-
-/* ssp1 clock */
-static struct clk ssp1_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-
-/* ssp2 clock */
-static struct clk ssp2_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-
-/* pwm clock */
-static struct clk pwm_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-#endif
-
-/* array of all spear 3xx clock lookups */
-static struct clk_lookup spear_clk_lookups[] = {
- { .con_id = "apb_pclk", .clk = &dummy_apb_pclk},
- /* root clks */
- { .con_id = "osc_32k_clk", .clk = &osc_32k_clk},
- { .con_id = "osc_24m_clk", .clk = &osc_24m_clk},
- /* clock derived from 32 KHz osc clk */
- { .dev_id = "rtc-spear", .clk = &rtc_clk},
- /* clock derived from 24 MHz osc clk */
- { .con_id = "pll1_clk", .clk = &pll1_clk},
- { .con_id = "pll3_48m_clk", .clk = &pll3_48m_clk},
- { .dev_id = "wdt", .clk = &wdt_clk},
- /* clock derived from pll1 clk */
- { .con_id = "cpu_clk", .clk = &cpu_clk},
- { .con_id = "ahb_clk", .clk = &ahb_clk},
- { .con_id = "uart_synth_clk", .clk = &uart_synth_clk},
- { .con_id = "firda_synth_clk", .clk = &firda_synth_clk},
- { .con_id = "gpt0_synth_clk", .clk = &gpt0_synth_clk},
- { .con_id = "gpt1_synth_clk", .clk = &gpt1_synth_clk},
- { .con_id = "gpt2_synth_clk", .clk = &gpt2_synth_clk},
- { .dev_id = "uart", .clk = &uart_clk},
- { .dev_id = "firda", .clk = &firda_clk},
- { .dev_id = "gpt0", .clk = &gpt0_clk},
- { .dev_id = "gpt1", .clk = &gpt1_clk},
- { .dev_id = "gpt2", .clk = &gpt2_clk},
- /* clock derived from pll3 clk */
- { .dev_id = "designware_udc", .clk = &usbd_clk},
- { .con_id = "usbh_clk", .clk = &usbh_clk},
- /* clock derived from ahb clk */
- { .con_id = "apb_clk", .clk = &apb_clk},
- { .dev_id = "i2c_designware.0", .clk = &i2c_clk},
- { .dev_id = "dma", .clk = &dma_clk},
- { .dev_id = "jpeg", .clk = &jpeg_clk},
- { .dev_id = "gmac", .clk = &gmac_clk},
- { .dev_id = "smi", .clk = &smi_clk},
- { .dev_id = "c3", .clk = &c3_clk},
- /* clock derived from apb clk */
- { .dev_id = "adc", .clk = &adc_clk},
- { .dev_id = "ssp-pl022.0", .clk = &ssp0_clk},
- { .dev_id = "gpio", .clk = &gpio_clk},
-};
-
-/* array of all spear 300 clock lookups */
-#ifdef CONFIG_MACH_SPEAR300
-static struct clk_lookup spear300_clk_lookups[] = {
- { .dev_id = "clcd", .clk = &clcd_clk},
- { .con_id = "fsmc", .clk = &fsmc_clk},
- { .dev_id = "gpio1", .clk = &gpio1_clk},
- { .dev_id = "keyboard", .clk = &kbd_clk},
- { .dev_id = "sdhci", .clk = &sdhci_clk},
-};
-#endif
-
-/* array of all spear 310 clock lookups */
-#ifdef CONFIG_MACH_SPEAR310
-static struct clk_lookup spear310_clk_lookups[] = {
- { .con_id = "fsmc", .clk = &fsmc_clk},
- { .con_id = "emi", .clk = &emi_clk},
- { .dev_id = "uart1", .clk = &uart1_clk},
- { .dev_id = "uart2", .clk = &uart2_clk},
- { .dev_id = "uart3", .clk = &uart3_clk},
- { .dev_id = "uart4", .clk = &uart4_clk},
- { .dev_id = "uart5", .clk = &uart5_clk},
-};
-#endif
-
-/* array of all spear 320 clock lookups */
-#ifdef CONFIG_MACH_SPEAR320
-static struct clk_lookup spear320_clk_lookups[] = {
- { .dev_id = "clcd", .clk = &clcd_clk},
- { .con_id = "fsmc", .clk = &fsmc_clk},
- { .dev_id = "i2c_designware.1", .clk = &i2c1_clk},
- { .con_id = "emi", .clk = &emi_clk},
- { .dev_id = "pwm", .clk = &pwm_clk},
- { .dev_id = "sdhci", .clk = &sdhci_clk},
- { .dev_id = "c_can_platform.0", .clk = &can0_clk},
- { .dev_id = "c_can_platform.1", .clk = &can1_clk},
- { .dev_id = "ssp-pl022.1", .clk = &ssp1_clk},
- { .dev_id = "ssp-pl022.2", .clk = &ssp2_clk},
- { .dev_id = "uart1", .clk = &uart1_clk},
- { .dev_id = "uart2", .clk = &uart2_clk},
-};
-#endif
-
-void __init spear3xx_clk_init(void)
-{
- int i, cnt;
- struct clk_lookup *lookups;
-
- if (machine_is_spear300()) {
- cnt = ARRAY_SIZE(spear300_clk_lookups);
- lookups = spear300_clk_lookups;
- } else if (machine_is_spear310()) {
- cnt = ARRAY_SIZE(spear310_clk_lookups);
- lookups = spear310_clk_lookups;
- } else {
- cnt = ARRAY_SIZE(spear320_clk_lookups);
- lookups = spear320_clk_lookups;
- }
-
- for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
- clk_register(&spear_clk_lookups[i]);
-
- for (i = 0; i < cnt; i++)
- clk_register(&lookups[i]);
-
- clk_init();
-}
diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h
index 14276e5a98d2..15c107aad202 100644
--- a/arch/arm/mach-spear3xx/include/mach/generic.h
+++ b/arch/arm/mach-spear3xx/include/mach/generic.h
@@ -36,8 +36,8 @@ extern struct amba_device spear3xx_uart_device;
extern struct sys_timer spear3xx_timer;
/* Add spear3xx family function declarations here */
-void __init spear3xx_clk_init(void);
void __init spear_setup_timer(void);
+void __init spear3xx_clk_init(void);
void __init spear3xx_map_io(void);
void __init spear3xx_init_irq(void);
void __init spear3xx_init(void);
@@ -156,7 +156,6 @@ extern struct pmx_dev spear310_pmx_tdm0;
/* Add spear310 machine function declarations here */
void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
u8 pmx_dev_count);
-
#endif /* CONFIG_MACH_SPEAR310 */
/* spear320 declarations */
diff --git a/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/arch/arm/mach-spear3xx/include/mach/misc_regs.h
index 5bd8cd8d4852..50cfe0d1a7c4 100644
--- a/arch/arm/mach-spear3xx/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear3xx/include/mach/misc_regs.h
@@ -15,150 +15,8 @@
#define __MACH_MISC_REGS_H
#include <mach/hardware.h>
+#include <mach/spear.h>
#define MISC_BASE IOMEM(VA_SPEAR3XX_ICM3_MISC_REG_BASE)
-#define SOC_CFG_CTR (MISC_BASE + 0x000)
-#define DIAG_CFG_CTR (MISC_BASE + 0x004)
-#define PLL1_CTR (MISC_BASE + 0x008)
-#define PLL1_FRQ (MISC_BASE + 0x00C)
-#define PLL1_MOD (MISC_BASE + 0x010)
-#define PLL2_CTR (MISC_BASE + 0x014)
-/* PLL_CTR register masks */
-#define PLL_ENABLE 2
-#define PLL_MODE_SHIFT 4
-#define PLL_MODE_MASK 0x3
-#define PLL_MODE_NORMAL 0
-#define PLL_MODE_FRACTION 1
-#define PLL_MODE_DITH_DSB 2
-#define PLL_MODE_DITH_SSB 3
-
-#define PLL2_FRQ (MISC_BASE + 0x018)
-/* PLL FRQ register masks */
-#define PLL_DIV_N_SHIFT 0
-#define PLL_DIV_N_MASK 0xFF
-#define PLL_DIV_P_SHIFT 8
-#define PLL_DIV_P_MASK 0x7
-#define PLL_NORM_FDBK_M_SHIFT 24
-#define PLL_NORM_FDBK_M_MASK 0xFF
-#define PLL_DITH_FDBK_M_SHIFT 16
-#define PLL_DITH_FDBK_M_MASK 0xFFFF
-
-#define PLL2_MOD (MISC_BASE + 0x01C)
-#define PLL_CLK_CFG (MISC_BASE + 0x020)
-#define CORE_CLK_CFG (MISC_BASE + 0x024)
-/* CORE CLK CFG register masks */
-#define PLL_HCLK_RATIO_SHIFT 10
-#define PLL_HCLK_RATIO_MASK 0x3
-#define HCLK_PCLK_RATIO_SHIFT 8
-#define HCLK_PCLK_RATIO_MASK 0x3
-
-#define PERIP_CLK_CFG (MISC_BASE + 0x028)
-/* PERIP_CLK_CFG register masks */
-#define UART_CLK_SHIFT 4
-#define UART_CLK_MASK 0x1
-#define FIRDA_CLK_SHIFT 5
-#define FIRDA_CLK_MASK 0x3
-#define GPT0_CLK_SHIFT 8
-#define GPT1_CLK_SHIFT 11
-#define GPT2_CLK_SHIFT 12
-#define GPT_CLK_MASK 0x1
-#define AUX_CLK_PLL3_VAL 0
-#define AUX_CLK_PLL1_VAL 1
-
-#define PERIP1_CLK_ENB (MISC_BASE + 0x02C)
-/* PERIP1_CLK_ENB register masks */
-#define UART_CLK_ENB 3
-#define SSP_CLK_ENB 5
-#define I2C_CLK_ENB 7
-#define JPEG_CLK_ENB 8
-#define FIRDA_CLK_ENB 10
-#define GPT1_CLK_ENB 11
-#define GPT2_CLK_ENB 12
-#define ADC_CLK_ENB 15
-#define RTC_CLK_ENB 17
-#define GPIO_CLK_ENB 18
-#define DMA_CLK_ENB 19
-#define SMI_CLK_ENB 21
-#define GMAC_CLK_ENB 23
-#define USBD_CLK_ENB 24
-#define USBH_CLK_ENB 25
-#define C3_CLK_ENB 31
-
-#define SOC_CORE_ID (MISC_BASE + 0x030)
-#define RAS_CLK_ENB (MISC_BASE + 0x034)
-#define PERIP1_SOF_RST (MISC_BASE + 0x038)
-/* PERIP1_SOF_RST register masks */
-#define JPEG_SOF_RST 8
-
-#define SOC_USER_ID (MISC_BASE + 0x03C)
-#define RAS_SOF_RST (MISC_BASE + 0x040)
-#define PRSC1_CLK_CFG (MISC_BASE + 0x044)
-#define PRSC2_CLK_CFG (MISC_BASE + 0x048)
-#define PRSC3_CLK_CFG (MISC_BASE + 0x04C)
-/* gpt synthesizer register masks */
-#define GPT_MSCALE_SHIFT 0
-#define GPT_MSCALE_MASK 0xFFF
-#define GPT_NSCALE_SHIFT 12
-#define GPT_NSCALE_MASK 0xF
-
-#define AMEM_CLK_CFG (MISC_BASE + 0x050)
-#define EXPI_CLK_CFG (MISC_BASE + 0x054)
-#define CLCD_CLK_SYNT (MISC_BASE + 0x05C)
-#define FIRDA_CLK_SYNT (MISC_BASE + 0x060)
-#define UART_CLK_SYNT (MISC_BASE + 0x064)
-#define GMAC_CLK_SYNT (MISC_BASE + 0x068)
-#define RAS1_CLK_SYNT (MISC_BASE + 0x06C)
-#define RAS2_CLK_SYNT (MISC_BASE + 0x070)
-#define RAS3_CLK_SYNT (MISC_BASE + 0x074)
-#define RAS4_CLK_SYNT (MISC_BASE + 0x078)
-/* aux clk synthesiser register masks for irda to ras4 */
-#define AUX_SYNT_ENB 31
-#define AUX_EQ_SEL_SHIFT 30
-#define AUX_EQ_SEL_MASK 1
-#define AUX_EQ1_SEL 0
-#define AUX_EQ2_SEL 1
-#define AUX_XSCALE_SHIFT 16
-#define AUX_XSCALE_MASK 0xFFF
-#define AUX_YSCALE_SHIFT 0
-#define AUX_YSCALE_MASK 0xFFF
-
-#define ICM1_ARB_CFG (MISC_BASE + 0x07C)
-#define ICM2_ARB_CFG (MISC_BASE + 0x080)
-#define ICM3_ARB_CFG (MISC_BASE + 0x084)
-#define ICM4_ARB_CFG (MISC_BASE + 0x088)
-#define ICM5_ARB_CFG (MISC_BASE + 0x08C)
-#define ICM6_ARB_CFG (MISC_BASE + 0x090)
-#define ICM7_ARB_CFG (MISC_BASE + 0x094)
-#define ICM8_ARB_CFG (MISC_BASE + 0x098)
-#define ICM9_ARB_CFG (MISC_BASE + 0x09C)
-#define DMA_CHN_CFG (MISC_BASE + 0x0A0)
-#define USB2_PHY_CFG (MISC_BASE + 0x0A4)
-#define GMAC_CFG_CTR (MISC_BASE + 0x0A8)
-#define EXPI_CFG_CTR (MISC_BASE + 0x0AC)
-#define PRC1_LOCK_CTR (MISC_BASE + 0x0C0)
-#define PRC2_LOCK_CTR (MISC_BASE + 0x0C4)
-#define PRC3_LOCK_CTR (MISC_BASE + 0x0C8)
-#define PRC4_LOCK_CTR (MISC_BASE + 0x0CC)
-#define PRC1_IRQ_CTR (MISC_BASE + 0x0D0)
-#define PRC2_IRQ_CTR (MISC_BASE + 0x0D4)
-#define PRC3_IRQ_CTR (MISC_BASE + 0x0D8)
-#define PRC4_IRQ_CTR (MISC_BASE + 0x0DC)
-#define PWRDOWN_CFG_CTR (MISC_BASE + 0x0E0)
-#define COMPSSTL_1V8_CFG (MISC_BASE + 0x0E4)
-#define COMPSSTL_2V5_CFG (MISC_BASE + 0x0E8)
-#define COMPCOR_3V3_CFG (MISC_BASE + 0x0EC)
-#define SSTLPAD_CFG_CTR (MISC_BASE + 0x0F0)
-#define BIST1_CFG_CTR (MISC_BASE + 0x0F4)
-#define BIST2_CFG_CTR (MISC_BASE + 0x0F8)
-#define BIST3_CFG_CTR (MISC_BASE + 0x0FC)
-#define BIST4_CFG_CTR (MISC_BASE + 0x100)
-#define BIST5_CFG_CTR (MISC_BASE + 0x104)
-#define BIST1_STS_RES (MISC_BASE + 0x108)
-#define BIST2_STS_RES (MISC_BASE + 0x10C)
-#define BIST3_STS_RES (MISC_BASE + 0x110)
-#define BIST4_STS_RES (MISC_BASE + 0x114)
-#define BIST5_STS_RES (MISC_BASE + 0x118)
-#define SYSERR_CFG_CTR (MISC_BASE + 0x11C)
-
#endif /* __MACH_MISC_REGS_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h
index 63fd98356919..881109522060 100644
--- a/arch/arm/mach-spear3xx/include/mach/spear.h
+++ b/arch/arm/mach-spear3xx/include/mach/spear.h
@@ -78,4 +78,17 @@
#define SPEAR_SYS_CTRL_BASE SPEAR3XX_ICM3_SYS_CTRL_BASE
#define VA_SPEAR_SYS_CTRL_BASE VA_SPEAR3XX_ICM3_SYS_CTRL_BASE
+/* SPEAr320 Macros */
+#define SPEAR320_SOC_CONFIG_BASE UL(0xB3000000)
+#define VA_SPEAR320_SOC_CONFIG_BASE UL(0xFE000000)
+#define SPEAR320_CONTROL_REG IOMEM(VA_SPEAR320_SOC_CONFIG_BASE)
+#define SPEAR320_EXT_CTRL_REG IOMEM(VA_SPEAR320_SOC_CONFIG_BASE + 0x0018)
+ #define SPEAR320_UARTX_PCLK_MASK 0x1
+ #define SPEAR320_UART2_PCLK_SHIFT 8
+ #define SPEAR320_UART3_PCLK_SHIFT 9
+ #define SPEAR320_UART4_PCLK_SHIFT 10
+ #define SPEAR320_UART5_PCLK_SHIFT 11
+ #define SPEAR320_UART6_PCLK_SHIFT 12
+ #define SPEAR320_RS485_PCLK_SHIFT 13
+
#endif /* __MACH_SPEAR3XX_H */
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
index deaaf199612c..bfdad554319c 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -16,6 +16,7 @@
#include <plat/shirq.h>
#include <mach/generic.h>
#include <mach/hardware.h>
+#include <mach/spear.h>
/* pad multiplexing support */
/* muxing registers */
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index b1733c37f209..2625ab9a6c8b 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -511,6 +511,8 @@ static void __init spear3xx_timer_init(void)
char pclk_name[] = "pll3_48m_clk";
struct clk *gpt_clk, *pclk;
+ spear3xx_clk_init();
+
/* get the system timer clock */
gpt_clk = clk_get_sys("gpt0", NULL);
if (IS_ERR(gpt_clk)) {
diff --git a/arch/arm/mach-spear6xx/Makefile b/arch/arm/mach-spear6xx/Makefile
index 76e5750552fc..898831d93f37 100644
--- a/arch/arm/mach-spear6xx/Makefile
+++ b/arch/arm/mach-spear6xx/Makefile
@@ -3,4 +3,4 @@
#
# common files
-obj-y += clock.o spear6xx.o
+obj-y += spear6xx.o
diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c
deleted file mode 100644
index a86499a8a15f..000000000000
--- a/arch/arm/mach-spear6xx/clock.c
+++ /dev/null
@@ -1,683 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/clock.c
- *
- * SPEAr6xx machines clock framework source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <plat/clock.h>
-#include <mach/misc_regs.h>
-
-/* root clks */
-/* 32 KHz oscillator clock */
-static struct clk osc_32k_clk = {
- .flags = ALWAYS_ENABLED,
- .rate = 32000,
-};
-
-/* 30 MHz oscillator clock */
-static struct clk osc_30m_clk = {
- .flags = ALWAYS_ENABLED,
- .rate = 30000000,
-};
-
-/* clock derived from 32 KHz osc clk */
-/* rtc clock */
-static struct clk rtc_clk = {
- .pclk = &osc_32k_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = RTC_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* clock derived from 30 MHz osc clk */
-/* pll masks structure */
-static struct pll_clk_masks pll1_masks = {
- .mode_mask = PLL_MODE_MASK,
- .mode_shift = PLL_MODE_SHIFT,
- .norm_fdbk_m_mask = PLL_NORM_FDBK_M_MASK,
- .norm_fdbk_m_shift = PLL_NORM_FDBK_M_SHIFT,
- .dith_fdbk_m_mask = PLL_DITH_FDBK_M_MASK,
- .dith_fdbk_m_shift = PLL_DITH_FDBK_M_SHIFT,
- .div_p_mask = PLL_DIV_P_MASK,
- .div_p_shift = PLL_DIV_P_SHIFT,
- .div_n_mask = PLL_DIV_N_MASK,
- .div_n_shift = PLL_DIV_N_SHIFT,
-};
-
-/* pll1 configuration structure */
-static struct pll_clk_config pll1_config = {
- .mode_reg = PLL1_CTR,
- .cfg_reg = PLL1_FRQ,
- .masks = &pll1_masks,
-};
-
-/* pll rate configuration table, in ascending order of rates */
-struct pll_rate_tbl pll_rtbl[] = {
- {.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */
- {.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */
-};
-
-/* PLL1 clock */
-static struct clk pll1_clk = {
- .flags = ENABLED_ON_INIT,
- .pclk = &osc_30m_clk,
- .en_reg = PLL1_CTR,
- .en_reg_bit = PLL_ENABLE,
- .calc_rate = &pll_calc_rate,
- .recalc = &pll_clk_recalc,
- .set_rate = &pll_clk_set_rate,
- .rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1},
- .private_data = &pll1_config,
-};
-
-/* PLL3 48 MHz clock */
-static struct clk pll3_48m_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &osc_30m_clk,
- .rate = 48000000,
-};
-
-/* watch dog timer clock */
-static struct clk wdt_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &osc_30m_clk,
- .recalc = &follow_parent,
-};
-
-/* clock derived from pll1 clk */
-/* cpu clock */
-static struct clk cpu_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll1_clk,
- .recalc = &follow_parent,
-};
-
-/* ahb masks structure */
-static struct bus_clk_masks ahb_masks = {
- .mask = PLL_HCLK_RATIO_MASK,
- .shift = PLL_HCLK_RATIO_SHIFT,
-};
-
-/* ahb configuration structure */
-static struct bus_clk_config ahb_config = {
- .reg = CORE_CLK_CFG,
- .masks = &ahb_masks,
-};
-
-/* ahb rate configuration table, in ascending order of rates */
-struct bus_rate_tbl bus_rtbl[] = {
- {.div = 3}, /* == parent divided by 4 */
- {.div = 2}, /* == parent divided by 3 */
- {.div = 1}, /* == parent divided by 2 */
- {.div = 0}, /* == parent divided by 1 */
-};
-
-/* ahb clock */
-static struct clk ahb_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll1_clk,
- .calc_rate = &bus_calc_rate,
- .recalc = &bus_clk_recalc,
- .set_rate = &bus_clk_set_rate,
- .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
- .private_data = &ahb_config,
-};
-
-/* auxiliary synthesizers masks */
-static struct aux_clk_masks aux_masks = {
- .eq_sel_mask = AUX_EQ_SEL_MASK,
- .eq_sel_shift = AUX_EQ_SEL_SHIFT,
- .eq1_mask = AUX_EQ1_SEL,
- .eq2_mask = AUX_EQ2_SEL,
- .xscale_sel_mask = AUX_XSCALE_MASK,
- .xscale_sel_shift = AUX_XSCALE_SHIFT,
- .yscale_sel_mask = AUX_YSCALE_MASK,
- .yscale_sel_shift = AUX_YSCALE_SHIFT,
-};
-
-/* uart configurations */
-static struct aux_clk_config uart_synth_config = {
- .synth_reg = UART_CLK_SYNT,
- .masks = &aux_masks,
-};
-
-/* aux rate configuration table, in ascending order of rates */
-struct aux_rate_tbl aux_rtbl[] = {
- /* For PLL1 = 332 MHz */
- {.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */
- {.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */
- {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
-};
-
-/* uart synth clock */
-static struct clk uart_synth_clk = {
- .en_reg = UART_CLK_SYNT,
- .en_reg_bit = AUX_SYNT_ENB,
- .pclk = &pll1_clk,
- .calc_rate = &aux_calc_rate,
- .recalc = &aux_clk_recalc,
- .set_rate = &aux_clk_set_rate,
- .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
- .private_data = &uart_synth_config,
-};
-
-/* uart parents */
-static struct pclk_info uart_pclk_info[] = {
- {
- .pclk = &uart_synth_clk,
- .pclk_val = AUX_CLK_PLL1_VAL,
- }, {
- .pclk = &pll3_48m_clk,
- .pclk_val = AUX_CLK_PLL3_VAL,
- },
-};
-
-/* uart parent select structure */
-static struct pclk_sel uart_pclk_sel = {
- .pclk_info = uart_pclk_info,
- .pclk_count = ARRAY_SIZE(uart_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = UART_CLK_MASK,
-};
-
-/* uart0 clock */
-static struct clk uart0_clk = {
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = UART0_CLK_ENB,
- .pclk_sel = &uart_pclk_sel,
- .pclk_sel_shift = UART_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* uart1 clock */
-static struct clk uart1_clk = {
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = UART1_CLK_ENB,
- .pclk_sel = &uart_pclk_sel,
- .pclk_sel_shift = UART_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* firda configurations */
-static struct aux_clk_config firda_synth_config = {
- .synth_reg = FIRDA_CLK_SYNT,
- .masks = &aux_masks,
-};
-
-/* firda synth clock */
-static struct clk firda_synth_clk = {
- .en_reg = FIRDA_CLK_SYNT,
- .en_reg_bit = AUX_SYNT_ENB,
- .pclk = &pll1_clk,
- .calc_rate = &aux_calc_rate,
- .recalc = &aux_clk_recalc,
- .set_rate = &aux_clk_set_rate,
- .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
- .private_data = &firda_synth_config,
-};
-
-/* firda parents */
-static struct pclk_info firda_pclk_info[] = {
- {
- .pclk = &firda_synth_clk,
- .pclk_val = AUX_CLK_PLL1_VAL,
- }, {
- .pclk = &pll3_48m_clk,
- .pclk_val = AUX_CLK_PLL3_VAL,
- },
-};
-
-/* firda parent select structure */
-static struct pclk_sel firda_pclk_sel = {
- .pclk_info = firda_pclk_info,
- .pclk_count = ARRAY_SIZE(firda_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = FIRDA_CLK_MASK,
-};
-
-/* firda clock */
-static struct clk firda_clk = {
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = FIRDA_CLK_ENB,
- .pclk_sel = &firda_pclk_sel,
- .pclk_sel_shift = FIRDA_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* clcd configurations */
-static struct aux_clk_config clcd_synth_config = {
- .synth_reg = CLCD_CLK_SYNT,
- .masks = &aux_masks,
-};
-
-/* firda synth clock */
-static struct clk clcd_synth_clk = {
- .en_reg = CLCD_CLK_SYNT,
- .en_reg_bit = AUX_SYNT_ENB,
- .pclk = &pll1_clk,
- .calc_rate = &aux_calc_rate,
- .recalc = &aux_clk_recalc,
- .set_rate = &aux_clk_set_rate,
- .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
- .private_data = &clcd_synth_config,
-};
-
-/* clcd parents */
-static struct pclk_info clcd_pclk_info[] = {
- {
- .pclk = &clcd_synth_clk,
- .pclk_val = AUX_CLK_PLL1_VAL,
- }, {
- .pclk = &pll3_48m_clk,
- .pclk_val = AUX_CLK_PLL3_VAL,
- },
-};
-
-/* clcd parent select structure */
-static struct pclk_sel clcd_pclk_sel = {
- .pclk_info = clcd_pclk_info,
- .pclk_count = ARRAY_SIZE(clcd_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = CLCD_CLK_MASK,
-};
-
-/* clcd clock */
-static struct clk clcd_clk = {
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = CLCD_CLK_ENB,
- .pclk_sel = &clcd_pclk_sel,
- .pclk_sel_shift = CLCD_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* gpt synthesizer masks */
-static struct gpt_clk_masks gpt_masks = {
- .mscale_sel_mask = GPT_MSCALE_MASK,
- .mscale_sel_shift = GPT_MSCALE_SHIFT,
- .nscale_sel_mask = GPT_NSCALE_MASK,
- .nscale_sel_shift = GPT_NSCALE_SHIFT,
-};
-
-/* gpt rate configuration table, in ascending order of rates */
-struct gpt_rate_tbl gpt_rtbl[] = {
- /* For pll1 = 332 MHz */
- {.mscale = 4, .nscale = 0}, /* 41.5 MHz */
- {.mscale = 2, .nscale = 0}, /* 55.3 MHz */
- {.mscale = 1, .nscale = 0}, /* 83 MHz */
-};
-
-/* gpt0 synth clk config*/
-static struct gpt_clk_config gpt0_synth_config = {
- .synth_reg = PRSC1_CLK_CFG,
- .masks = &gpt_masks,
-};
-
-/* gpt synth clock */
-static struct clk gpt0_synth_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll1_clk,
- .calc_rate = &gpt_calc_rate,
- .recalc = &gpt_clk_recalc,
- .set_rate = &gpt_clk_set_rate,
- .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
- .private_data = &gpt0_synth_config,
-};
-
-/* gpt parents */
-static struct pclk_info gpt0_pclk_info[] = {
- {
- .pclk = &gpt0_synth_clk,
- .pclk_val = AUX_CLK_PLL1_VAL,
- }, {
- .pclk = &pll3_48m_clk,
- .pclk_val = AUX_CLK_PLL3_VAL,
- },
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt0_pclk_sel = {
- .pclk_info = gpt0_pclk_info,
- .pclk_count = ARRAY_SIZE(gpt0_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt0 ARM1 subsystem timer clock */
-static struct clk gpt0_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk_sel = &gpt0_pclk_sel,
- .pclk_sel_shift = GPT0_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-
-/* Note: gpt0 and gpt1 share same parent clocks */
-/* gpt parent select structure */
-static struct pclk_sel gpt1_pclk_sel = {
- .pclk_info = gpt0_pclk_info,
- .pclk_count = ARRAY_SIZE(gpt0_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt1 timer clock */
-static struct clk gpt1_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk_sel = &gpt1_pclk_sel,
- .pclk_sel_shift = GPT1_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* gpt2 synth clk config*/
-static struct gpt_clk_config gpt2_synth_config = {
- .synth_reg = PRSC2_CLK_CFG,
- .masks = &gpt_masks,
-};
-
-/* gpt synth clock */
-static struct clk gpt2_synth_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll1_clk,
- .calc_rate = &gpt_calc_rate,
- .recalc = &gpt_clk_recalc,
- .set_rate = &gpt_clk_set_rate,
- .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
- .private_data = &gpt2_synth_config,
-};
-
-/* gpt parents */
-static struct pclk_info gpt2_pclk_info[] = {
- {
- .pclk = &gpt2_synth_clk,
- .pclk_val = AUX_CLK_PLL1_VAL,
- }, {
- .pclk = &pll3_48m_clk,
- .pclk_val = AUX_CLK_PLL3_VAL,
- },
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt2_pclk_sel = {
- .pclk_info = gpt2_pclk_info,
- .pclk_count = ARRAY_SIZE(gpt2_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt2 timer clock */
-static struct clk gpt2_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk_sel = &gpt2_pclk_sel,
- .pclk_sel_shift = GPT2_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* gpt3 synth clk config*/
-static struct gpt_clk_config gpt3_synth_config = {
- .synth_reg = PRSC3_CLK_CFG,
- .masks = &gpt_masks,
-};
-
-/* gpt synth clock */
-static struct clk gpt3_synth_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll1_clk,
- .calc_rate = &gpt_calc_rate,
- .recalc = &gpt_clk_recalc,
- .set_rate = &gpt_clk_set_rate,
- .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
- .private_data = &gpt3_synth_config,
-};
-
-/* gpt parents */
-static struct pclk_info gpt3_pclk_info[] = {
- {
- .pclk = &gpt3_synth_clk,
- .pclk_val = AUX_CLK_PLL1_VAL,
- }, {
- .pclk = &pll3_48m_clk,
- .pclk_val = AUX_CLK_PLL3_VAL,
- },
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt3_pclk_sel = {
- .pclk_info = gpt3_pclk_info,
- .pclk_count = ARRAY_SIZE(gpt3_pclk_info),
- .pclk_sel_reg = PERIP_CLK_CFG,
- .pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt3 timer clock */
-static struct clk gpt3_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk_sel = &gpt3_pclk_sel,
- .pclk_sel_shift = GPT3_CLK_SHIFT,
- .recalc = &follow_parent,
-};
-
-/* clock derived from pll3 clk */
-/* usbh0 clock */
-static struct clk usbh0_clk = {
- .pclk = &pll3_48m_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = USBH0_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* usbh1 clock */
-static struct clk usbh1_clk = {
- .pclk = &pll3_48m_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = USBH1_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* usbd clock */
-static struct clk usbd_clk = {
- .pclk = &pll3_48m_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = USBD_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* clock derived from ahb clk */
-/* apb masks structure */
-static struct bus_clk_masks apb_masks = {
- .mask = HCLK_PCLK_RATIO_MASK,
- .shift = HCLK_PCLK_RATIO_SHIFT,
-};
-
-/* apb configuration structure */
-static struct bus_clk_config apb_config = {
- .reg = CORE_CLK_CFG,
- .masks = &apb_masks,
-};
-
-/* apb clock */
-static struct clk apb_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &ahb_clk,
- .calc_rate = &bus_calc_rate,
- .recalc = &bus_clk_recalc,
- .set_rate = &bus_clk_set_rate,
- .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
- .private_data = &apb_config,
-};
-
-/* i2c clock */
-static struct clk i2c_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = I2C_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* dma clock */
-static struct clk dma_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = DMA_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* jpeg clock */
-static struct clk jpeg_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = JPEG_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* gmac clock */
-static struct clk gmac_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = GMAC_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* smi clock */
-static struct clk smi_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = SMI_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* fsmc clock */
-static struct clk fsmc_clk = {
- .pclk = &ahb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = FSMC_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* clock derived from apb clk */
-/* adc clock */
-static struct clk adc_clk = {
- .pclk = &apb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = ADC_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* ssp0 clock */
-static struct clk ssp0_clk = {
- .pclk = &apb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = SSP0_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* ssp1 clock */
-static struct clk ssp1_clk = {
- .pclk = &apb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = SSP1_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* ssp2 clock */
-static struct clk ssp2_clk = {
- .pclk = &apb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = SSP2_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* gpio0 ARM subsystem clock */
-static struct clk gpio0_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &apb_clk,
- .recalc = &follow_parent,
-};
-
-/* gpio1 clock */
-static struct clk gpio1_clk = {
- .pclk = &apb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = GPIO1_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-/* gpio2 clock */
-static struct clk gpio2_clk = {
- .pclk = &apb_clk,
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = GPIO2_CLK_ENB,
- .recalc = &follow_parent,
-};
-
-static struct clk dummy_apb_pclk;
-
-/* array of all spear 6xx clock lookups */
-static struct clk_lookup spear_clk_lookups[] = {
- { .con_id = "apb_pclk", .clk = &dummy_apb_pclk},
- /* root clks */
- { .con_id = "osc_32k_clk", .clk = &osc_32k_clk},
- { .con_id = "osc_30m_clk", .clk = &osc_30m_clk},
- /* clock derived from 32 KHz os clk */
- { .dev_id = "rtc-spear", .clk = &rtc_clk},
- /* clock derived from 30 MHz os clk */
- { .con_id = "pll1_clk", .clk = &pll1_clk},
- { .con_id = "pll3_48m_clk", .clk = &pll3_48m_clk},
- { .dev_id = "wdt", .clk = &wdt_clk},
- /* clock derived from pll1 clk */
- { .con_id = "cpu_clk", .clk = &cpu_clk},
- { .con_id = "ahb_clk", .clk = &ahb_clk},
- { .con_id = "uart_synth_clk", .clk = &uart_synth_clk},
- { .con_id = "firda_synth_clk", .clk = &firda_synth_clk},
- { .con_id = "clcd_synth_clk", .clk = &clcd_synth_clk},
- { .con_id = "gpt0_synth_clk", .clk = &gpt0_synth_clk},
- { .con_id = "gpt2_synth_clk", .clk = &gpt2_synth_clk},
- { .con_id = "gpt3_synth_clk", .clk = &gpt3_synth_clk},
- { .dev_id = "d0000000.serial", .clk = &uart0_clk},
- { .dev_id = "d0080000.serial", .clk = &uart1_clk},
- { .dev_id = "firda", .clk = &firda_clk},
- { .dev_id = "clcd", .clk = &clcd_clk},
- { .dev_id = "gpt0", .clk = &gpt0_clk},
- { .dev_id = "gpt1", .clk = &gpt1_clk},
- { .dev_id = "gpt2", .clk = &gpt2_clk},
- { .dev_id = "gpt3", .clk = &gpt3_clk},
- /* clock derived from pll3 clk */
- { .dev_id = "designware_udc", .clk = &usbd_clk},
- { .con_id = "usbh.0_clk", .clk = &usbh0_clk},
- { .con_id = "usbh.1_clk", .clk = &usbh1_clk},
- /* clock derived from ahb clk */
- { .con_id = "apb_clk", .clk = &apb_clk},
- { .dev_id = "d0200000.i2c", .clk = &i2c_clk},
- { .dev_id = "dma", .clk = &dma_clk},
- { .dev_id = "jpeg", .clk = &jpeg_clk},
- { .dev_id = "gmac", .clk = &gmac_clk},
- { .dev_id = "smi", .clk = &smi_clk},
- { .dev_id = "fsmc-nand", .clk = &fsmc_clk},
- /* clock derived from apb clk */
- { .dev_id = "adc", .clk = &adc_clk},
- { .dev_id = "ssp-pl022.0", .clk = &ssp0_clk},
- { .dev_id = "ssp-pl022.1", .clk = &ssp1_clk},
- { .dev_id = "ssp-pl022.2", .clk = &ssp2_clk},
- { .dev_id = "f0100000.gpio", .clk = &gpio0_clk},
- { .dev_id = "fc980000.gpio", .clk = &gpio1_clk},
- { .dev_id = "d8100000.gpio", .clk = &gpio2_clk},
-};
-
-void __init spear6xx_clk_init(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
- clk_register(&spear_clk_lookups[i]);
-
- clk_init();
-}
diff --git a/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
index 68c20a007b0d..633074fddf9a 100644
--- a/arch/arm/mach-spear6xx/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
@@ -15,160 +15,8 @@
#define __MACH_MISC_REGS_H
#include <mach/hardware.h>
+#include <mach/spear.h>
#define MISC_BASE IOMEM(VA_SPEAR6XX_ICM3_MISC_REG_BASE)
-#define SOC_CFG_CTR (MISC_BASE + 0x000)
-#define DIAG_CFG_CTR (MISC_BASE + 0x004)
-#define PLL1_CTR (MISC_BASE + 0x008)
-#define PLL1_FRQ (MISC_BASE + 0x00C)
-#define PLL1_MOD (MISC_BASE + 0x010)
-#define PLL2_CTR (MISC_BASE + 0x014)
-/* PLL_CTR register masks */
-#define PLL_ENABLE 2
-#define PLL_MODE_SHIFT 4
-#define PLL_MODE_MASK 0x3
-#define PLL_MODE_NORMAL 0
-#define PLL_MODE_FRACTION 1
-#define PLL_MODE_DITH_DSB 2
-#define PLL_MODE_DITH_SSB 3
-
-#define PLL2_FRQ (MISC_BASE + 0x018)
-/* PLL FRQ register masks */
-#define PLL_DIV_N_SHIFT 0
-#define PLL_DIV_N_MASK 0xFF
-#define PLL_DIV_P_SHIFT 8
-#define PLL_DIV_P_MASK 0x7
-#define PLL_NORM_FDBK_M_SHIFT 24
-#define PLL_NORM_FDBK_M_MASK 0xFF
-#define PLL_DITH_FDBK_M_SHIFT 16
-#define PLL_DITH_FDBK_M_MASK 0xFFFF
-
-#define PLL2_MOD (MISC_BASE + 0x01C)
-#define PLL_CLK_CFG (MISC_BASE + 0x020)
-#define CORE_CLK_CFG (MISC_BASE + 0x024)
-/* CORE CLK CFG register masks */
-#define PLL_HCLK_RATIO_SHIFT 10
-#define PLL_HCLK_RATIO_MASK 0x3
-#define HCLK_PCLK_RATIO_SHIFT 8
-#define HCLK_PCLK_RATIO_MASK 0x3
-
-#define PERIP_CLK_CFG (MISC_BASE + 0x028)
-/* PERIP_CLK_CFG register masks */
-#define CLCD_CLK_SHIFT 2
-#define CLCD_CLK_MASK 0x3
-#define UART_CLK_SHIFT 4
-#define UART_CLK_MASK 0x1
-#define FIRDA_CLK_SHIFT 5
-#define FIRDA_CLK_MASK 0x3
-#define GPT0_CLK_SHIFT 8
-#define GPT1_CLK_SHIFT 10
-#define GPT2_CLK_SHIFT 11
-#define GPT3_CLK_SHIFT 12
-#define GPT_CLK_MASK 0x1
-#define AUX_CLK_PLL3_VAL 0
-#define AUX_CLK_PLL1_VAL 1
-
-#define PERIP1_CLK_ENB (MISC_BASE + 0x02C)
-/* PERIP1_CLK_ENB register masks */
-#define UART0_CLK_ENB 3
-#define UART1_CLK_ENB 4
-#define SSP0_CLK_ENB 5
-#define SSP1_CLK_ENB 6
-#define I2C_CLK_ENB 7
-#define JPEG_CLK_ENB 8
-#define FSMC_CLK_ENB 9
-#define FIRDA_CLK_ENB 10
-#define GPT2_CLK_ENB 11
-#define GPT3_CLK_ENB 12
-#define GPIO2_CLK_ENB 13
-#define SSP2_CLK_ENB 14
-#define ADC_CLK_ENB 15
-#define GPT1_CLK_ENB 11
-#define RTC_CLK_ENB 17
-#define GPIO1_CLK_ENB 18
-#define DMA_CLK_ENB 19
-#define SMI_CLK_ENB 21
-#define CLCD_CLK_ENB 22
-#define GMAC_CLK_ENB 23
-#define USBD_CLK_ENB 24
-#define USBH0_CLK_ENB 25
-#define USBH1_CLK_ENB 26
-
-#define SOC_CORE_ID (MISC_BASE + 0x030)
-#define RAS_CLK_ENB (MISC_BASE + 0x034)
-#define PERIP1_SOF_RST (MISC_BASE + 0x038)
-/* PERIP1_SOF_RST register masks */
-#define JPEG_SOF_RST 8
-
-#define SOC_USER_ID (MISC_BASE + 0x03C)
-#define RAS_SOF_RST (MISC_BASE + 0x040)
-#define PRSC1_CLK_CFG (MISC_BASE + 0x044)
-#define PRSC2_CLK_CFG (MISC_BASE + 0x048)
-#define PRSC3_CLK_CFG (MISC_BASE + 0x04C)
-/* gpt synthesizer register masks */
-#define GPT_MSCALE_SHIFT 0
-#define GPT_MSCALE_MASK 0xFFF
-#define GPT_NSCALE_SHIFT 12
-#define GPT_NSCALE_MASK 0xF
-
-#define AMEM_CLK_CFG (MISC_BASE + 0x050)
-#define EXPI_CLK_CFG (MISC_BASE + 0x054)
-#define CLCD_CLK_SYNT (MISC_BASE + 0x05C)
-#define FIRDA_CLK_SYNT (MISC_BASE + 0x060)
-#define UART_CLK_SYNT (MISC_BASE + 0x064)
-#define GMAC_CLK_SYNT (MISC_BASE + 0x068)
-#define RAS1_CLK_SYNT (MISC_BASE + 0x06C)
-#define RAS2_CLK_SYNT (MISC_BASE + 0x070)
-#define RAS3_CLK_SYNT (MISC_BASE + 0x074)
-#define RAS4_CLK_SYNT (MISC_BASE + 0x078)
-/* aux clk synthesiser register masks for irda to ras4 */
-#define AUX_SYNT_ENB 31
-#define AUX_EQ_SEL_SHIFT 30
-#define AUX_EQ_SEL_MASK 1
-#define AUX_EQ1_SEL 0
-#define AUX_EQ2_SEL 1
-#define AUX_XSCALE_SHIFT 16
-#define AUX_XSCALE_MASK 0xFFF
-#define AUX_YSCALE_SHIFT 0
-#define AUX_YSCALE_MASK 0xFFF
-
-#define ICM1_ARB_CFG (MISC_BASE + 0x07C)
-#define ICM2_ARB_CFG (MISC_BASE + 0x080)
-#define ICM3_ARB_CFG (MISC_BASE + 0x084)
-#define ICM4_ARB_CFG (MISC_BASE + 0x088)
-#define ICM5_ARB_CFG (MISC_BASE + 0x08C)
-#define ICM6_ARB_CFG (MISC_BASE + 0x090)
-#define ICM7_ARB_CFG (MISC_BASE + 0x094)
-#define ICM8_ARB_CFG (MISC_BASE + 0x098)
-#define ICM9_ARB_CFG (MISC_BASE + 0x09C)
-#define DMA_CHN_CFG (MISC_BASE + 0x0A0)
-#define USB2_PHY_CFG (MISC_BASE + 0x0A4)
-#define GMAC_CFG_CTR (MISC_BASE + 0x0A8)
-#define EXPI_CFG_CTR (MISC_BASE + 0x0AC)
-#define PRC1_LOCK_CTR (MISC_BASE + 0x0C0)
-#define PRC2_LOCK_CTR (MISC_BASE + 0x0C4)
-#define PRC3_LOCK_CTR (MISC_BASE + 0x0C8)
-#define PRC4_LOCK_CTR (MISC_BASE + 0x0CC)
-#define PRC1_IRQ_CTR (MISC_BASE + 0x0D0)
-#define PRC2_IRQ_CTR (MISC_BASE + 0x0D4)
-#define PRC3_IRQ_CTR (MISC_BASE + 0x0D8)
-#define PRC4_IRQ_CTR (MISC_BASE + 0x0DC)
-#define PWRDOWN_CFG_CTR (MISC_BASE + 0x0E0)
-#define COMPSSTL_1V8_CFG (MISC_BASE + 0x0E4)
-#define COMPSSTL_2V5_CFG (MISC_BASE + 0x0E8)
-#define COMPCOR_3V3_CFG (MISC_BASE + 0x0EC)
-#define SSTLPAD_CFG_CTR (MISC_BASE + 0x0F0)
-#define BIST1_CFG_CTR (MISC_BASE + 0x0F4)
-#define BIST2_CFG_CTR (MISC_BASE + 0x0F8)
-#define BIST3_CFG_CTR (MISC_BASE + 0x0FC)
-#define BIST4_CFG_CTR (MISC_BASE + 0x100)
-#define BIST5_CFG_CTR (MISC_BASE + 0x104)
-#define BIST1_STS_RES (MISC_BASE + 0x108)
-#define BIST2_STS_RES (MISC_BASE + 0x10C)
-#define BIST3_STS_RES (MISC_BASE + 0x110)
-#define BIST4_STS_RES (MISC_BASE + 0x114)
-#define BIST5_STS_RES (MISC_BASE + 0x118)
-#define SYSERR_CFG_CTR (MISC_BASE + 0x11C)
-
#endif /* __MACH_MISC_REGS_H */
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
index 2ed8b14c82c8..771e19e3c43c 100644
--- a/arch/arm/mach-spear6xx/spear6xx.c
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -56,9 +56,6 @@ static struct map_desc spear6xx_io_desc[] __initdata = {
void __init spear6xx_map_io(void)
{
iotable_init(spear6xx_io_desc, ARRAY_SIZE(spear6xx_io_desc));
-
- /* This will initialize clock framework */
- spear6xx_clk_init();
}
static void __init spear6xx_timer_init(void)
@@ -66,6 +63,8 @@ static void __init spear6xx_timer_init(void)
char pclk_name[] = "pll3_48m_clk";
struct clk *gpt_clk, *pclk;
+ spear6xx_clk_init();
+
/* get the system timer clock */
gpt_clk = clk_get_sys("gpt0", NULL);
if (IS_ERR(gpt_clk)) {
diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile
index e0f2e5b9530c..8c0cb6a965a3 100644
--- a/arch/arm/plat-spear/Makefile
+++ b/arch/arm/plat-spear/Makefile
@@ -3,6 +3,6 @@
#
# Common support
-obj-y := clock.o restart.o time.o
+obj-y := restart.o time.o
obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o padmux.o
diff --git a/arch/arm/plat-spear/clock.c b/arch/arm/plat-spear/clock.c
deleted file mode 100644
index 67dd00381ea6..000000000000
--- a/arch/arm/plat-spear/clock.c
+++ /dev/null
@@ -1,1005 +0,0 @@
-/*
- * arch/arm/plat-spear/clock.c
- *
- * Clock framework for SPEAr platform
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/bug.h>
-#include <linux/clk.h>
-#include <linux/debugfs.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <plat/clock.h>
-
-static DEFINE_SPINLOCK(clocks_lock);
-static LIST_HEAD(root_clks);
-#ifdef CONFIG_DEBUG_FS
-static LIST_HEAD(clocks);
-#endif
-
-static void propagate_rate(struct clk *, int on_init);
-#ifdef CONFIG_DEBUG_FS
-static int clk_debugfs_reparent(struct clk *);
-#endif
-
-static int generic_clk_enable(struct clk *clk)
-{
- unsigned int val;
-
- if (!clk->en_reg)
- return -EFAULT;
-
- val = readl(clk->en_reg);
- if (unlikely(clk->flags & RESET_TO_ENABLE))
- val &= ~(1 << clk->en_reg_bit);
- else
- val |= 1 << clk->en_reg_bit;
-
- writel(val, clk->en_reg);
-
- return 0;
-}
-
-static void generic_clk_disable(struct clk *clk)
-{
- unsigned int val;
-
- if (!clk->en_reg)
- return;
-
- val = readl(clk->en_reg);
- if (unlikely(clk->flags & RESET_TO_ENABLE))
- val |= 1 << clk->en_reg_bit;
- else
- val &= ~(1 << clk->en_reg_bit);
-
- writel(val, clk->en_reg);
-}
-
-/* generic clk ops */
-static struct clkops generic_clkops = {
- .enable = generic_clk_enable,
- .disable = generic_clk_disable,
-};
-
-/* returns current programmed clocks clock info structure */
-static struct pclk_info *pclk_info_get(struct clk *clk)
-{
- unsigned int val, i;
- struct pclk_info *info = NULL;
-
- val = (readl(clk->pclk_sel->pclk_sel_reg) >> clk->pclk_sel_shift)
- & clk->pclk_sel->pclk_sel_mask;
-
- for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
- if (clk->pclk_sel->pclk_info[i].pclk_val == val)
- info = &clk->pclk_sel->pclk_info[i];
- }
-
- return info;
-}
-
-/*
- * Set Update pclk, and pclk_info of clk and add clock sibling node to current
- * parents children list
- */
-static void clk_reparent(struct clk *clk, struct pclk_info *pclk_info)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&clocks_lock, flags);
- list_del(&clk->sibling);
- list_add(&clk->sibling, &pclk_info->pclk->children);
-
- clk->pclk = pclk_info->pclk;
- spin_unlock_irqrestore(&clocks_lock, flags);
-
-#ifdef CONFIG_DEBUG_FS
- clk_debugfs_reparent(clk);
-#endif
-}
-
-static void do_clk_disable(struct clk *clk)
-{
- if (!clk)
- return;
-
- if (!clk->usage_count) {
- WARN_ON(1);
- return;
- }
-
- clk->usage_count--;
-
- if (clk->usage_count == 0) {
- /*
- * Surely, there are no active childrens or direct users
- * of this clock
- */
- if (clk->pclk)
- do_clk_disable(clk->pclk);
-
- if (clk->ops && clk->ops->disable)
- clk->ops->disable(clk);
- }
-}
-
-static int do_clk_enable(struct clk *clk)
-{
- int ret = 0;
-
- if (!clk)
- return -EFAULT;
-
- if (clk->usage_count == 0) {
- if (clk->pclk) {
- ret = do_clk_enable(clk->pclk);
- if (ret)
- goto err;
- }
- if (clk->ops && clk->ops->enable) {
- ret = clk->ops->enable(clk);
- if (ret) {
- if (clk->pclk)
- do_clk_disable(clk->pclk);
- goto err;
- }
- }
- /*
- * Since the clock is going to be used for the first
- * time please reclac
- */
- if (clk->recalc) {
- ret = clk->recalc(clk);
- if (ret)
- goto err;
- }
- }
- clk->usage_count++;
-err:
- return ret;
-}
-
-/*
- * clk_enable - inform the system when the clock source should be running.
- * @clk: clock source
- *
- * If the clock can not be enabled/disabled, this should return success.
- *
- * Returns success (0) or negative errno.
- */
-int clk_enable(struct clk *clk)
-{
- unsigned long flags;
- int ret = 0;
-
- spin_lock_irqsave(&clocks_lock, flags);
- ret = do_clk_enable(clk);
- spin_unlock_irqrestore(&clocks_lock, flags);
- return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-
-/*
- * clk_disable - inform the system when the clock source is no longer required.
- * @clk: clock source
- *
- * Inform the system that a clock source is no longer required by
- * a driver and may be shut down.
- *
- * Implementation detail: if the clock source is shared between
- * multiple drivers, clk_enable() calls must be balanced by the
- * same number of clk_disable() calls for the clock source to be
- * disabled.
- */
-void clk_disable(struct clk *clk)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&clocks_lock, flags);
- do_clk_disable(clk);
- spin_unlock_irqrestore(&clocks_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-/**
- * clk_get_rate - obtain the current clock rate (in Hz) for a clock source.
- * This is only valid once the clock source has been enabled.
- * @clk: clock source
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
- unsigned long flags, rate;
-
- spin_lock_irqsave(&clocks_lock, flags);
- rate = clk->rate;
- spin_unlock_irqrestore(&clocks_lock, flags);
-
- return rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/**
- * clk_set_parent - set the parent clock source for this clock
- * @clk: clock source
- * @parent: parent clock source
- *
- * Returns success (0) or negative errno.
- */
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- int i, found = 0, val = 0;
- unsigned long flags;
-
- if (!clk || !parent)
- return -EFAULT;
- if (clk->pclk == parent)
- return 0;
- if (!clk->pclk_sel)
- return -EPERM;
-
- /* check if requested parent is in clk parent list */
- for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
- if (clk->pclk_sel->pclk_info[i].pclk == parent) {
- found = 1;
- break;
- }
- }
-
- if (!found)
- return -EINVAL;
-
- spin_lock_irqsave(&clocks_lock, flags);
- /* reflect parent change in hardware */
- val = readl(clk->pclk_sel->pclk_sel_reg);
- val &= ~(clk->pclk_sel->pclk_sel_mask << clk->pclk_sel_shift);
- val |= clk->pclk_sel->pclk_info[i].pclk_val << clk->pclk_sel_shift;
- writel(val, clk->pclk_sel->pclk_sel_reg);
- spin_unlock_irqrestore(&clocks_lock, flags);
-
- /* reflect parent change in software */
- clk_reparent(clk, &clk->pclk_sel->pclk_info[i]);
-
- propagate_rate(clk, 0);
- return 0;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-/**
- * clk_set_rate - set the clock rate for a clock source
- * @clk: clock source
- * @rate: desired clock rate in Hz
- *
- * Returns success (0) or negative errno.
- */
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long flags;
- int ret = -EINVAL;
-
- if (!clk || !rate)
- return -EFAULT;
-
- if (clk->set_rate) {
- spin_lock_irqsave(&clocks_lock, flags);
- ret = clk->set_rate(clk, rate);
- if (!ret)
- /* if successful -> propagate */
- propagate_rate(clk, 0);
- spin_unlock_irqrestore(&clocks_lock, flags);
- } else if (clk->pclk) {
- u32 mult = clk->div_factor ? clk->div_factor : 1;
- ret = clk_set_rate(clk->pclk, mult * rate);
- }
-
- return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-/* registers clock in platform clock framework */
-void clk_register(struct clk_lookup *cl)
-{
- struct clk *clk;
- unsigned long flags;
-
- if (!cl || !cl->clk)
- return;
- clk = cl->clk;
-
- spin_lock_irqsave(&clocks_lock, flags);
-
- INIT_LIST_HEAD(&clk->children);
- if (clk->flags & ALWAYS_ENABLED)
- clk->ops = NULL;
- else if (!clk->ops)
- clk->ops = &generic_clkops;
-
- /* root clock don't have any parents */
- if (!clk->pclk && !clk->pclk_sel) {
- list_add(&clk->sibling, &root_clks);
- } else if (clk->pclk && !clk->pclk_sel) {
- /* add clocks with only one parent to parent's children list */
- list_add(&clk->sibling, &clk->pclk->children);
- } else {
- /* clocks with more than one parent */
- struct pclk_info *pclk_info;
-
- pclk_info = pclk_info_get(clk);
- if (!pclk_info) {
- pr_err("CLKDEV: invalid pclk info of clk with"
- " %s dev_id and %s con_id\n",
- cl->dev_id, cl->con_id);
- } else {
- clk->pclk = pclk_info->pclk;
- list_add(&clk->sibling, &pclk_info->pclk->children);
- }
- }
-
- spin_unlock_irqrestore(&clocks_lock, flags);
-
- /* debugfs specific */
-#ifdef CONFIG_DEBUG_FS
- list_add(&clk->node, &clocks);
- clk->cl = cl;
-#endif
-
- /* add clock to arm clockdev framework */
- clkdev_add(cl);
-}
-
-/**
- * propagate_rate - recalculate and propagate all clocks to children
- * @pclk: parent clock required to be propogated
- * @on_init: flag for enabling clocks which are ENABLED_ON_INIT.
- *
- * Recalculates all children clocks
- */
-void propagate_rate(struct clk *pclk, int on_init)
-{
- struct clk *clk, *_temp;
- int ret = 0;
-
- list_for_each_entry_safe(clk, _temp, &pclk->children, sibling) {
- if (clk->recalc) {
- ret = clk->recalc(clk);
- /*
- * recalc will return error if clk out is not programmed
- * In this case configure default rate.
- */
- if (ret && clk->set_rate)
- clk->set_rate(clk, 0);
- }
- propagate_rate(clk, on_init);
-
- if (!on_init)
- continue;
-
- /* Enable clks enabled on init, in software view */
- if (clk->flags & ENABLED_ON_INIT)
- do_clk_enable(clk);
- }
-}
-
-/**
- * round_rate_index - return closest programmable rate index in rate_config tbl
- * @clk: ptr to clock structure
- * @drate: desired rate
- * @rate: final rate will be returned in this variable only.
- *
- * Finds index in rate_config for highest clk rate which is less than
- * requested rate. If there is no clk rate lesser than requested rate then
- * -EINVAL is returned. This routine assumes that rate_config is written
- * in incrementing order of clk rates.
- * If drate passed is zero then default rate is programmed.
- */
-static int
-round_rate_index(struct clk *clk, unsigned long drate, unsigned long *rate)
-{
- unsigned long tmp = 0, prev_rate = 0;
- int index;
-
- if (!clk->calc_rate)
- return -EFAULT;
-
- if (!drate)
- return -EINVAL;
-
- /*
- * This loops ends on two conditions:
- * - as soon as clk is found with rate greater than requested rate.
- * - if all clks in rate_config are smaller than requested rate.
- */
- for (index = 0; index < clk->rate_config.count; index++) {
- prev_rate = tmp;
- tmp = clk->calc_rate(clk, index);
- if (drate < tmp) {
- index--;
- break;
- }
- }
- /* return if can't find suitable clock */
- if (index < 0) {
- index = -EINVAL;
- *rate = 0;
- } else if (index == clk->rate_config.count) {
- /* program with highest clk rate possible */
- index = clk->rate_config.count - 1;
- *rate = tmp;
- } else
- *rate = prev_rate;
-
- return index;
-}
-
-/**
- * clk_round_rate - adjust a rate to the exact rate a clock can provide
- * @clk: clock source
- * @rate: desired clock rate in Hz
- *
- * Returns rounded clock rate in Hz, or negative errno.
- */
-long clk_round_rate(struct clk *clk, unsigned long drate)
-{
- long rate = 0;
- int index;
-
- /*
- * propagate call to parent who supports calc_rate. Similar approach is
- * used in clk_set_rate.
- */
- if (!clk->calc_rate) {
- u32 mult;
- if (!clk->pclk)
- return clk->rate;
-
- mult = clk->div_factor ? clk->div_factor : 1;
- return clk_round_rate(clk->pclk, mult * drate) / mult;
- }
-
- index = round_rate_index(clk, drate, &rate);
- if (index >= 0)
- return rate;
- else
- return index;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-/*All below functions are called with lock held */
-
-/*
- * Calculates pll clk rate for specific value of mode, m, n and p
- *
- * In normal mode
- * rate = (2 * M[15:8] * Fin)/(N * 2^P)
- *
- * In Dithered mode
- * rate = (2 * M[15:0] * Fin)/(256 * N * 2^P)
- */
-unsigned long pll_calc_rate(struct clk *clk, int index)
-{
- unsigned long rate = clk->pclk->rate;
- struct pll_rate_tbl *tbls = clk->rate_config.tbls;
- unsigned int mode;
-
- mode = tbls[index].mode ? 256 : 1;
- return (((2 * rate / 10000) * tbls[index].m) /
- (mode * tbls[index].n * (1 << tbls[index].p))) * 10000;
-}
-
-/*
- * calculates current programmed rate of pll1
- *
- * In normal mode
- * rate = (2 * M[15:8] * Fin)/(N * 2^P)
- *
- * In Dithered mode
- * rate = (2 * M[15:0] * Fin)/(256 * N * 2^P)
- */
-int pll_clk_recalc(struct clk *clk)
-{
- struct pll_clk_config *config = clk->private_data;
- unsigned int num = 2, den = 0, val, mode = 0;
-
- mode = (readl(config->mode_reg) >> config->masks->mode_shift) &
- config->masks->mode_mask;
-
- val = readl(config->cfg_reg);
- /* calculate denominator */
- den = (val >> config->masks->div_p_shift) & config->masks->div_p_mask;
- den = 1 << den;
- den *= (val >> config->masks->div_n_shift) & config->masks->div_n_mask;
-
- /* calculate numerator & denominator */
- if (!mode) {
- /* Normal mode */
- num *= (val >> config->masks->norm_fdbk_m_shift) &
- config->masks->norm_fdbk_m_mask;
- } else {
- /* Dithered mode */
- num *= (val >> config->masks->dith_fdbk_m_shift) &
- config->masks->dith_fdbk_m_mask;
- den *= 256;
- }
-
- if (!den)
- return -EINVAL;
-
- clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000;
- return 0;
-}
-
-/*
- * Configures new clock rate of pll
- */
-int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
- struct pll_rate_tbl *tbls = clk->rate_config.tbls;
- struct pll_clk_config *config = clk->private_data;
- unsigned long val, rate;
- int i;
-
- i = round_rate_index(clk, desired_rate, &rate);
- if (i < 0)
- return i;
-
- val = readl(config->mode_reg) &
- ~(config->masks->mode_mask << config->masks->mode_shift);
- val |= (tbls[i].mode & config->masks->mode_mask) <<
- config->masks->mode_shift;
- writel(val, config->mode_reg);
-
- val = readl(config->cfg_reg) &
- ~(config->masks->div_p_mask << config->masks->div_p_shift);
- val |= (tbls[i].p & config->masks->div_p_mask) <<
- config->masks->div_p_shift;
- val &= ~(config->masks->div_n_mask << config->masks->div_n_shift);
- val |= (tbls[i].n & config->masks->div_n_mask) <<
- config->masks->div_n_shift;
- val &= ~(config->masks->dith_fdbk_m_mask <<
- config->masks->dith_fdbk_m_shift);
- if (tbls[i].mode)
- val |= (tbls[i].m & config->masks->dith_fdbk_m_mask) <<
- config->masks->dith_fdbk_m_shift;
- else
- val |= (tbls[i].m & config->masks->norm_fdbk_m_mask) <<
- config->masks->norm_fdbk_m_shift;
-
- writel(val, config->cfg_reg);
-
- clk->rate = rate;
-
- return 0;
-}
-
-/*
- * Calculates ahb, apb clk rate for specific value of div
- */
-unsigned long bus_calc_rate(struct clk *clk, int index)
-{
- unsigned long rate = clk->pclk->rate;
- struct bus_rate_tbl *tbls = clk->rate_config.tbls;
-
- return rate / (tbls[index].div + 1);
-}
-
-/* calculates current programmed rate of ahb or apb bus */
-int bus_clk_recalc(struct clk *clk)
-{
- struct bus_clk_config *config = clk->private_data;
- unsigned int div;
-
- div = ((readl(config->reg) >> config->masks->shift) &
- config->masks->mask) + 1;
-
- if (!div)
- return -EINVAL;
-
- clk->rate = (unsigned long)clk->pclk->rate / div;
- return 0;
-}
-
-/* Configures new clock rate of AHB OR APB bus */
-int bus_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
- struct bus_rate_tbl *tbls = clk->rate_config.tbls;
- struct bus_clk_config *config = clk->private_data;
- unsigned long val, rate;
- int i;
-
- i = round_rate_index(clk, desired_rate, &rate);
- if (i < 0)
- return i;
-
- val = readl(config->reg) &
- ~(config->masks->mask << config->masks->shift);
- val |= (tbls[i].div & config->masks->mask) << config->masks->shift;
- writel(val, config->reg);
-
- clk->rate = rate;
-
- return 0;
-}
-
-/*
- * gives rate for different values of eq, x and y
- *
- * Fout from synthesizer can be given from two equations:
- * Fout1 = (Fin * X/Y)/2 EQ1
- * Fout2 = Fin * X/Y EQ2
- */
-unsigned long aux_calc_rate(struct clk *clk, int index)
-{
- unsigned long rate = clk->pclk->rate;
- struct aux_rate_tbl *tbls = clk->rate_config.tbls;
- u8 eq = tbls[index].eq ? 1 : 2;
-
- return (((rate/10000) * tbls[index].xscale) /
- (tbls[index].yscale * eq)) * 10000;
-}
-
-/*
- * calculates current programmed rate of auxiliary synthesizers
- * used by: UART, FIRDA
- *
- * Fout from synthesizer can be given from two equations:
- * Fout1 = (Fin * X/Y)/2
- * Fout2 = Fin * X/Y
- *
- * Selection of eqn 1 or 2 is programmed in register
- */
-int aux_clk_recalc(struct clk *clk)
-{
- struct aux_clk_config *config = clk->private_data;
- unsigned int num = 1, den = 1, val, eqn;
-
- val = readl(config->synth_reg);
-
- eqn = (val >> config->masks->eq_sel_shift) &
- config->masks->eq_sel_mask;
- if (eqn == config->masks->eq1_mask)
- den *= 2;
-
- /* calculate numerator */
- num = (val >> config->masks->xscale_sel_shift) &
- config->masks->xscale_sel_mask;
-
- /* calculate denominator */
- den *= (val >> config->masks->yscale_sel_shift) &
- config->masks->yscale_sel_mask;
-
- if (!den)
- return -EINVAL;
-
- clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000;
- return 0;
-}
-
-/* Configures new clock rate of auxiliary synthesizers used by: UART, FIRDA*/
-int aux_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
- struct aux_rate_tbl *tbls = clk->rate_config.tbls;
- struct aux_clk_config *config = clk->private_data;
- unsigned long val, rate;
- int i;
-
- i = round_rate_index(clk, desired_rate, &rate);
- if (i < 0)
- return i;
-
- val = readl(config->synth_reg) &
- ~(config->masks->eq_sel_mask << config->masks->eq_sel_shift);
- val |= (tbls[i].eq & config->masks->eq_sel_mask) <<
- config->masks->eq_sel_shift;
- val &= ~(config->masks->xscale_sel_mask <<
- config->masks->xscale_sel_shift);
- val |= (tbls[i].xscale & config->masks->xscale_sel_mask) <<
- config->masks->xscale_sel_shift;
- val &= ~(config->masks->yscale_sel_mask <<
- config->masks->yscale_sel_shift);
- val |= (tbls[i].yscale & config->masks->yscale_sel_mask) <<
- config->masks->yscale_sel_shift;
- writel(val, config->synth_reg);
-
- clk->rate = rate;
-
- return 0;
-}
-
-/*
- * Calculates gpt clk rate for different values of mscale and nscale
- *
- * Fout= Fin/((2 ^ (N+1)) * (M+1))
- */
-unsigned long gpt_calc_rate(struct clk *clk, int index)
-{
- unsigned long rate = clk->pclk->rate;
- struct gpt_rate_tbl *tbls = clk->rate_config.tbls;
-
- return rate / ((1 << (tbls[index].nscale + 1)) *
- (tbls[index].mscale + 1));
-}
-
-/*
- * calculates current programmed rate of gpt synthesizers
- * Fout from synthesizer can be given from below equations:
- * Fout= Fin/((2 ^ (N+1)) * (M+1))
- */
-int gpt_clk_recalc(struct clk *clk)
-{
- struct gpt_clk_config *config = clk->private_data;
- unsigned int div = 1, val;
-
- val = readl(config->synth_reg);
- div += (val >> config->masks->mscale_sel_shift) &
- config->masks->mscale_sel_mask;
- div *= 1 << (((val >> config->masks->nscale_sel_shift) &
- config->masks->nscale_sel_mask) + 1);
-
- if (!div)
- return -EINVAL;
-
- clk->rate = (unsigned long)clk->pclk->rate / div;
- return 0;
-}
-
-/* Configures new clock rate of gptiliary synthesizers used by: UART, FIRDA*/
-int gpt_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
- struct gpt_rate_tbl *tbls = clk->rate_config.tbls;
- struct gpt_clk_config *config = clk->private_data;
- unsigned long val, rate;
- int i;
-
- i = round_rate_index(clk, desired_rate, &rate);
- if (i < 0)
- return i;
-
- val = readl(config->synth_reg) & ~(config->masks->mscale_sel_mask <<
- config->masks->mscale_sel_shift);
- val |= (tbls[i].mscale & config->masks->mscale_sel_mask) <<
- config->masks->mscale_sel_shift;
- val &= ~(config->masks->nscale_sel_mask <<
- config->masks->nscale_sel_shift);
- val |= (tbls[i].nscale & config->masks->nscale_sel_mask) <<
- config->masks->nscale_sel_shift;
- writel(val, config->synth_reg);
-
- clk->rate = rate;
-
- return 0;
-}
-
-/*
- * Calculates clcd clk rate for different values of div
- *
- * Fout from synthesizer can be given from below equation:
- * Fout= Fin/2*div (division factor)
- * div is 17 bits:-
- * 0-13 (fractional part)
- * 14-16 (integer part)
- * To calculate Fout we left shift val by 14 bits and divide Fin by
- * complete div (including fractional part) and then right shift the
- * result by 14 places.
- */
-unsigned long clcd_calc_rate(struct clk *clk, int index)
-{
- unsigned long rate = clk->pclk->rate;
- struct clcd_rate_tbl *tbls = clk->rate_config.tbls;
-
- rate /= 1000;
- rate <<= 12;
- rate /= (2 * tbls[index].div);
- rate >>= 12;
- rate *= 1000;
-
- return rate;
-}
-
-/*
- * calculates current programmed rate of clcd synthesizer
- * Fout from synthesizer can be given from below equation:
- * Fout= Fin/2*div (division factor)
- * div is 17 bits:-
- * 0-13 (fractional part)
- * 14-16 (integer part)
- * To calculate Fout we left shift val by 14 bits and divide Fin by
- * complete div (including fractional part) and then right shift the
- * result by 14 places.
- */
-int clcd_clk_recalc(struct clk *clk)
-{
- struct clcd_clk_config *config = clk->private_data;
- unsigned int div = 1;
- unsigned long prate;
- unsigned int val;
-
- val = readl(config->synth_reg);
- div = (val >> config->masks->div_factor_shift) &
- config->masks->div_factor_mask;
-
- if (!div)
- return -EINVAL;
-
- prate = clk->pclk->rate / 1000; /* first level division, make it KHz */
-
- clk->rate = (((unsigned long)prate << 12) / (2 * div)) >> 12;
- clk->rate *= 1000;
- return 0;
-}
-
-/* Configures new clock rate of auxiliary synthesizers used by: UART, FIRDA*/
-int clcd_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
- struct clcd_rate_tbl *tbls = clk->rate_config.tbls;
- struct clcd_clk_config *config = clk->private_data;
- unsigned long val, rate;
- int i;
-
- i = round_rate_index(clk, desired_rate, &rate);
- if (i < 0)
- return i;
-
- val = readl(config->synth_reg) & ~(config->masks->div_factor_mask <<
- config->masks->div_factor_shift);
- val |= (tbls[i].div & config->masks->div_factor_mask) <<
- config->masks->div_factor_shift;
- writel(val, config->synth_reg);
-
- clk->rate = rate;
-
- return 0;
-}
-
-/*
- * Used for clocks that always have value as the parent clock divided by a
- * fixed divisor
- */
-int follow_parent(struct clk *clk)
-{
- unsigned int div_factor = (clk->div_factor < 1) ? 1 : clk->div_factor;
-
- clk->rate = clk->pclk->rate/div_factor;
- return 0;
-}
-
-/**
- * recalc_root_clocks - recalculate and propagate all root clocks
- *
- * Recalculates all root clocks (clocks with no parent), which if the
- * clock's .recalc is set correctly, should also propagate their rates.
- */
-void recalc_root_clocks(void)
-{
- struct clk *pclk;
- unsigned long flags;
- int ret = 0;
-
- spin_lock_irqsave(&clocks_lock, flags);
- list_for_each_entry(pclk, &root_clks, sibling) {
- if (pclk->recalc) {
- ret = pclk->recalc(pclk);
- /*
- * recalc will return error if clk out is not programmed
- * In this case configure default clock.
- */
- if (ret && pclk->set_rate)
- pclk->set_rate(pclk, 0);
- }
- propagate_rate(pclk, 1);
- /* Enable clks enabled on init, in software view */
- if (pclk->flags & ENABLED_ON_INIT)
- do_clk_enable(pclk);
- }
- spin_unlock_irqrestore(&clocks_lock, flags);
-}
-
-void __init clk_init(void)
-{
- recalc_root_clocks();
-}
-
-#ifdef CONFIG_DEBUG_FS
-/*
- * debugfs support to trace clock tree hierarchy and attributes
- */
-static struct dentry *clk_debugfs_root;
-static int clk_debugfs_register_one(struct clk *c)
-{
- int err;
- struct dentry *d;
- struct clk *pa = c->pclk;
- char s[255];
- char *p = s;
-
- if (c) {
- if (c->cl->con_id)
- p += sprintf(p, "%s", c->cl->con_id);
- if (c->cl->dev_id)
- p += sprintf(p, "%s", c->cl->dev_id);
- }
- d = debugfs_create_dir(s, pa ? pa->dent : clk_debugfs_root);
- if (!d)
- return -ENOMEM;
- c->dent = d;
-
- d = debugfs_create_u32("usage_count", S_IRUGO, c->dent,
- (u32 *)&c->usage_count);
- if (!d) {
- err = -ENOMEM;
- goto err_out;
- }
- d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
- if (!d) {
- err = -ENOMEM;
- goto err_out;
- }
- d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
- if (!d) {
- err = -ENOMEM;
- goto err_out;
- }
- return 0;
-
-err_out:
- debugfs_remove_recursive(c->dent);
- return err;
-}
-
-static int clk_debugfs_register(struct clk *c)
-{
- int err;
- struct clk *pa = c->pclk;
-
- if (pa && !pa->dent) {
- err = clk_debugfs_register(pa);
- if (err)
- return err;
- }
-
- if (!c->dent) {
- err = clk_debugfs_register_one(c);
- if (err)
- return err;
- }
- return 0;
-}
-
-static int __init clk_debugfs_init(void)
-{
- struct clk *c;
- struct dentry *d;
- int err;
-
- d = debugfs_create_dir("clock", NULL);
- if (!d)
- return -ENOMEM;
- clk_debugfs_root = d;
-
- list_for_each_entry(c, &clocks, node) {
- err = clk_debugfs_register(c);
- if (err)
- goto err_out;
- }
- return 0;
-err_out:
- debugfs_remove_recursive(clk_debugfs_root);
- return err;
-}
-late_initcall(clk_debugfs_init);
-
-static int clk_debugfs_reparent(struct clk *c)
-{
- debugfs_remove(c->dent);
- return clk_debugfs_register_one(c);
-}
-#endif /* CONFIG_DEBUG_FS */
diff --git a/arch/arm/plat-spear/include/plat/clock.h b/arch/arm/plat-spear/include/plat/clock.h
deleted file mode 100644
index 0062bafef12d..000000000000
--- a/arch/arm/plat-spear/include/plat/clock.h
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/clock.h
- *
- * Clock framework definitions for SPEAr platform
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_CLOCK_H
-#define __PLAT_CLOCK_H
-
-#include <linux/list.h>
-#include <linux/clkdev.h>
-#include <linux/types.h>
-
-/* clk structure flags */
-#define ALWAYS_ENABLED (1 << 0) /* clock always enabled */
-#define RESET_TO_ENABLE (1 << 1) /* reset register bit to enable clk */
-#define ENABLED_ON_INIT (1 << 2) /* clocks enabled at init */
-
-/**
- * struct clkops - clock operations
- * @enable: pointer to clock enable function
- * @disable: pointer to clock disable function
- */
-struct clkops {
- int (*enable) (struct clk *);
- void (*disable) (struct clk *);
-};
-
-/**
- * struct pclk_info - parents info
- * @pclk: pointer to parent clk
- * @pclk_val: value to be written for selecting this parent
- */
-struct pclk_info {
- struct clk *pclk;
- u8 pclk_val;
-};
-
-/**
- * struct pclk_sel - parents selection configuration
- * @pclk_info: pointer to array of parent clock info
- * @pclk_count: number of parents
- * @pclk_sel_reg: register for selecting a parent
- * @pclk_sel_mask: mask for selecting parent (can be used to clear bits also)
- */
-struct pclk_sel {
- struct pclk_info *pclk_info;
- u8 pclk_count;
- void __iomem *pclk_sel_reg;
- unsigned int pclk_sel_mask;
-};
-
-/**
- * struct rate_config - clk rate configurations
- * @tbls: array of device specific clk rate tables, in ascending order of rates
- * @count: size of tbls array
- * @default_index: default setting when originally disabled
- */
-struct rate_config {
- void *tbls;
- u8 count;
- u8 default_index;
-};
-
-/**
- * struct clk - clock structure
- * @usage_count: num of users who enabled this clock
- * @flags: flags for clock properties
- * @rate: programmed clock rate in Hz
- * @en_reg: clk enable/disable reg
- * @en_reg_bit: clk enable/disable bit
- * @ops: clk enable/disable ops - generic_clkops selected if NULL
- * @recalc: pointer to clock rate recalculate function
- * @set_rate: pointer to clock set rate function
- * @calc_rate: pointer to clock get rate function for index
- * @rate_config: rate configuration information, used by set_rate
- * @div_factor: division factor to parent clock.
- * @pclk: current parent clk
- * @pclk_sel: pointer to parent selection structure
- * @pclk_sel_shift: register shift for selecting parent of this clock
- * @children: list for childrens or this clock
- * @sibling: node for list of clocks having same parents
- * @private_data: clock specific private data
- * @node: list to maintain clocks linearly
- * @cl: clocklook up associated with this clock
- * @dent: object for debugfs
- */
-struct clk {
- unsigned int usage_count;
- unsigned int flags;
- unsigned long rate;
- void __iomem *en_reg;
- u8 en_reg_bit;
- const struct clkops *ops;
- int (*recalc) (struct clk *);
- int (*set_rate) (struct clk *, unsigned long rate);
- unsigned long (*calc_rate)(struct clk *, int index);
- struct rate_config rate_config;
- unsigned int div_factor;
-
- struct clk *pclk;
- struct pclk_sel *pclk_sel;
- unsigned int pclk_sel_shift;
-
- struct list_head children;
- struct list_head sibling;
- void *private_data;
-#ifdef CONFIG_DEBUG_FS
- struct list_head node;
- struct clk_lookup *cl;
- struct dentry *dent;
-#endif
-};
-
-/* pll configuration structure */
-struct pll_clk_masks {
- u32 mode_mask;
- u32 mode_shift;
-
- u32 norm_fdbk_m_mask;
- u32 norm_fdbk_m_shift;
- u32 dith_fdbk_m_mask;
- u32 dith_fdbk_m_shift;
- u32 div_p_mask;
- u32 div_p_shift;
- u32 div_n_mask;
- u32 div_n_shift;
-};
-
-struct pll_clk_config {
- void __iomem *mode_reg;
- void __iomem *cfg_reg;
- struct pll_clk_masks *masks;
-};
-
-/* pll clk rate config structure */
-struct pll_rate_tbl {
- u8 mode;
- u16 m;
- u8 n;
- u8 p;
-};
-
-/* ahb and apb bus configuration structure */
-struct bus_clk_masks {
- u32 mask;
- u32 shift;
-};
-
-struct bus_clk_config {
- void __iomem *reg;
- struct bus_clk_masks *masks;
-};
-
-/* ahb and apb clk bus rate config structure */
-struct bus_rate_tbl {
- u8 div;
-};
-
-/* Aux clk configuration structure: applicable to UART and FIRDA */
-struct aux_clk_masks {
- u32 eq_sel_mask;
- u32 eq_sel_shift;
- u32 eq1_mask;
- u32 eq2_mask;
- u32 xscale_sel_mask;
- u32 xscale_sel_shift;
- u32 yscale_sel_mask;
- u32 yscale_sel_shift;
-};
-
-struct aux_clk_config {
- void __iomem *synth_reg;
- struct aux_clk_masks *masks;
-};
-
-/* aux clk rate config structure */
-struct aux_rate_tbl {
- u16 xscale;
- u16 yscale;
- u8 eq;
-};
-
-/* GPT clk configuration structure */
-struct gpt_clk_masks {
- u32 mscale_sel_mask;
- u32 mscale_sel_shift;
- u32 nscale_sel_mask;
- u32 nscale_sel_shift;
-};
-
-struct gpt_clk_config {
- void __iomem *synth_reg;
- struct gpt_clk_masks *masks;
-};
-
-/* gpt clk rate config structure */
-struct gpt_rate_tbl {
- u16 mscale;
- u16 nscale;
-};
-
-/* clcd clk configuration structure */
-struct clcd_synth_masks {
- u32 div_factor_mask;
- u32 div_factor_shift;
-};
-
-struct clcd_clk_config {
- void __iomem *synth_reg;
- struct clcd_synth_masks *masks;
-};
-
-/* clcd clk rate config structure */
-struct clcd_rate_tbl {
- u16 div;
-};
-
-/* platform specific clock functions */
-void __init clk_init(void);
-void clk_register(struct clk_lookup *cl);
-void recalc_root_clocks(void);
-
-/* clock recalc & set rate functions */
-int follow_parent(struct clk *clk);
-unsigned long pll_calc_rate(struct clk *clk, int index);
-int pll_clk_recalc(struct clk *clk);
-int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-unsigned long bus_calc_rate(struct clk *clk, int index);
-int bus_clk_recalc(struct clk *clk);
-int bus_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-unsigned long gpt_calc_rate(struct clk *clk, int index);
-int gpt_clk_recalc(struct clk *clk);
-int gpt_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-unsigned long aux_calc_rate(struct clk *clk, int index);
-int aux_clk_recalc(struct clk *clk);
-int aux_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-unsigned long clcd_calc_rate(struct clk *clk, int index);
-int clcd_clk_recalc(struct clk *clk);
-int clcd_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-
-#endif /* __PLAT_CLOCK_H */
diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c
index abb5bdecd509..1c94989d725f 100644
--- a/arch/arm/plat-spear/time.c
+++ b/arch/arm/plat-spear/time.c
@@ -219,10 +219,10 @@ void __init spear_setup_timer(void)
goto err_iomap;
}
- ret = clk_enable(gpt_clk);
+ ret = clk_prepare_enable(gpt_clk);
if (ret < 0) {
- pr_err("%s:couldn't enable gpt clock\n", __func__);
- goto err_clk;
+ pr_err("%s:couldn't prepare-enable gpt clock\n", __func__);
+ goto err_prepare_enable_clk;
}
spear_clockevent_init();
@@ -230,7 +230,7 @@ void __init spear_setup_timer(void)
return;
-err_clk:
+err_prepare_enable_clk:
clk_put(gpt_clk);
err_iomap:
iounmap(gpt_base);
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 4a5bdbc30389..b9a5158a30b1 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -2,5 +2,6 @@
obj-$(CONFIG_CLKDEV_LOOKUP) += clkdev.o
obj-$(CONFIG_COMMON_CLK) += clk.o clk-fixed-rate.o clk-gate.o \
clk-mux.o clk-divider.o clk-fixed-factor.o
-
+# SoCs specific
obj-$(CONFIG_ARCH_MXS) += mxs/
+obj-$(CONFIG_PLAT_SPEAR) += spear/
diff --git a/drivers/clk/spear/Makefile b/drivers/clk/spear/Makefile
new file mode 100644
index 000000000000..335886049c83
--- /dev/null
+++ b/drivers/clk/spear/Makefile
@@ -0,0 +1,8 @@
+#
+# SPEAr Clock specific Makefile
+#
+
+obj-y += clk.o clk-aux-synth.o clk-frac-synth.o clk-gpt-synth.o clk-vco-pll.o
+
+obj-$(CONFIG_ARCH_SPEAR3XX) += spear3xx_clock.o
+obj-$(CONFIG_ARCH_SPEAR6XX) += spear6xx_clock.o
diff --git a/drivers/clk/spear/clk-aux-synth.c b/drivers/clk/spear/clk-aux-synth.c
new file mode 100644
index 000000000000..af34074e702b
--- /dev/null
+++ b/drivers/clk/spear/clk-aux-synth.c
@@ -0,0 +1,198 @@
+/*
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Auxiliary Synthesizer clock implementation
+ */
+
+#define pr_fmt(fmt) "clk-aux-synth: " fmt
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include "clk.h"
+
+/*
+ * DOC: Auxiliary Synthesizer clock
+ *
+ * Aux synth gives rate for different values of eq, x and y
+ *
+ * Fout from synthesizer can be given from two equations:
+ * Fout1 = (Fin * X/Y)/2 EQ1
+ * Fout2 = Fin * X/Y EQ2
+ */
+
+#define to_clk_aux(_hw) container_of(_hw, struct clk_aux, hw)
+
+static struct aux_clk_masks default_aux_masks = {
+ .eq_sel_mask = AUX_EQ_SEL_MASK,
+ .eq_sel_shift = AUX_EQ_SEL_SHIFT,
+ .eq1_mask = AUX_EQ1_SEL,
+ .eq2_mask = AUX_EQ2_SEL,
+ .xscale_sel_mask = AUX_XSCALE_MASK,
+ .xscale_sel_shift = AUX_XSCALE_SHIFT,
+ .yscale_sel_mask = AUX_YSCALE_MASK,
+ .yscale_sel_shift = AUX_YSCALE_SHIFT,
+ .enable_bit = AUX_SYNT_ENB,
+};
+
+static unsigned long aux_calc_rate(struct clk_hw *hw, unsigned long prate,
+ int index)
+{
+ struct clk_aux *aux = to_clk_aux(hw);
+ struct aux_rate_tbl *rtbl = aux->rtbl;
+ u8 eq = rtbl[index].eq ? 1 : 2;
+
+ return (((prate / 10000) * rtbl[index].xscale) /
+ (rtbl[index].yscale * eq)) * 10000;
+}
+
+static long clk_aux_round_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long *prate)
+{
+ struct clk_aux *aux = to_clk_aux(hw);
+ int unused;
+
+ return clk_round_rate_index(hw, drate, *prate, aux_calc_rate,
+ aux->rtbl_cnt, &unused);
+}
+
+static unsigned long clk_aux_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_aux *aux = to_clk_aux(hw);
+ unsigned int num = 1, den = 1, val, eqn;
+ unsigned long flags = 0;
+
+ if (aux->lock)
+ spin_lock_irqsave(aux->lock, flags);
+
+ val = readl_relaxed(aux->reg);
+
+ if (aux->lock)
+ spin_unlock_irqrestore(aux->lock, flags);
+
+ eqn = (val >> aux->masks->eq_sel_shift) & aux->masks->eq_sel_mask;
+ if (eqn == aux->masks->eq1_mask)
+ den = 2;
+
+ /* calculate numerator */
+ num = (val >> aux->masks->xscale_sel_shift) &
+ aux->masks->xscale_sel_mask;
+
+ /* calculate denominator */
+ den *= (val >> aux->masks->yscale_sel_shift) &
+ aux->masks->yscale_sel_mask;
+
+ if (!den)
+ return 0;
+
+ return (((parent_rate / 10000) * num) / den) * 10000;
+}
+
+/* Configures new clock rate of aux */
+static int clk_aux_set_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long prate)
+{
+ struct clk_aux *aux = to_clk_aux(hw);
+ struct aux_rate_tbl *rtbl = aux->rtbl;
+ unsigned long val, flags = 0;
+ int i;
+
+ clk_round_rate_index(hw, drate, prate, aux_calc_rate, aux->rtbl_cnt,
+ &i);
+
+ if (aux->lock)
+ spin_lock_irqsave(aux->lock, flags);
+
+ val = readl_relaxed(aux->reg) &
+ ~(aux->masks->eq_sel_mask << aux->masks->eq_sel_shift);
+ val |= (rtbl[i].eq & aux->masks->eq_sel_mask) <<
+ aux->masks->eq_sel_shift;
+ val &= ~(aux->masks->xscale_sel_mask << aux->masks->xscale_sel_shift);
+ val |= (rtbl[i].xscale & aux->masks->xscale_sel_mask) <<
+ aux->masks->xscale_sel_shift;
+ val &= ~(aux->masks->yscale_sel_mask << aux->masks->yscale_sel_shift);
+ val |= (rtbl[i].yscale & aux->masks->yscale_sel_mask) <<
+ aux->masks->yscale_sel_shift;
+ writel_relaxed(val, aux->reg);
+
+ if (aux->lock)
+ spin_unlock_irqrestore(aux->lock, flags);
+
+ return 0;
+}
+
+static struct clk_ops clk_aux_ops = {
+ .recalc_rate = clk_aux_recalc_rate,
+ .round_rate = clk_aux_round_rate,
+ .set_rate = clk_aux_set_rate,
+};
+
+struct clk *clk_register_aux(const char *aux_name, const char *gate_name,
+ const char *parent_name, unsigned long flags, void __iomem *reg,
+ struct aux_clk_masks *masks, struct aux_rate_tbl *rtbl,
+ u8 rtbl_cnt, spinlock_t *lock, struct clk **gate_clk)
+{
+ struct clk_aux *aux;
+ struct clk_init_data init;
+ struct clk *clk;
+
+ if (!aux_name || !parent_name || !reg || !rtbl || !rtbl_cnt) {
+ pr_err("Invalid arguments passed");
+ return ERR_PTR(-EINVAL);
+ }
+
+ aux = kzalloc(sizeof(*aux), GFP_KERNEL);
+ if (!aux) {
+ pr_err("could not allocate aux clk\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ /* struct clk_aux assignments */
+ if (!masks)
+ aux->masks = &default_aux_masks;
+ else
+ aux->masks = masks;
+
+ aux->reg = reg;
+ aux->rtbl = rtbl;
+ aux->rtbl_cnt = rtbl_cnt;
+ aux->lock = lock;
+ aux->hw.init = &init;
+
+ init.name = aux_name;
+ init.ops = &clk_aux_ops;
+ init.flags = flags;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ clk = clk_register(NULL, &aux->hw);
+ if (IS_ERR_OR_NULL(clk))
+ goto free_aux;
+
+ if (gate_name) {
+ struct clk *tgate_clk;
+
+ tgate_clk = clk_register_gate(NULL, gate_name, aux_name, 0, reg,
+ aux->masks->enable_bit, 0, lock);
+ if (IS_ERR_OR_NULL(tgate_clk))
+ goto free_aux;
+
+ if (gate_clk)
+ *gate_clk = tgate_clk;
+ }
+
+ return clk;
+
+free_aux:
+ kfree(aux);
+ pr_err("clk register failed\n");
+
+ return NULL;
+}
diff --git a/drivers/clk/spear/clk-frac-synth.c b/drivers/clk/spear/clk-frac-synth.c
new file mode 100644
index 000000000000..4dbdb3fe18e0
--- /dev/null
+++ b/drivers/clk/spear/clk-frac-synth.c
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Fractional Synthesizer clock implementation
+ */
+
+#define pr_fmt(fmt) "clk-frac-synth: " fmt
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include "clk.h"
+
+#define DIV_FACTOR_MASK 0x1FFFF
+
+/*
+ * DOC: Fractional Synthesizer clock
+ *
+ * Fout from synthesizer can be given from below equation:
+ *
+ * Fout= Fin/2*div (division factor)
+ * div is 17 bits:-
+ * 0-13 (fractional part)
+ * 14-16 (integer part)
+ * div is (16-14 bits).(13-0 bits) (in binary)
+ *
+ * Fout = Fin/(2 * div)
+ * Fout = ((Fin / 10000)/(2 * div)) * 10000
+ * Fout = (2^14 * (Fin / 10000)/(2^14 * (2 * div))) * 10000
+ * Fout = (((Fin / 10000) << 14)/(2 * (div << 14))) * 10000
+ *
+ * div << 14 simply 17 bit value written at register.
+ * Max error due to scaling down by 10000 is 10 KHz
+ */
+
+#define to_clk_frac(_hw) container_of(_hw, struct clk_frac, hw)
+
+static unsigned long frac_calc_rate(struct clk_hw *hw, unsigned long prate,
+ int index)
+{
+ struct clk_frac *frac = to_clk_frac(hw);
+ struct frac_rate_tbl *rtbl = frac->rtbl;
+
+ prate /= 10000;
+ prate <<= 14;
+ prate /= (2 * rtbl[index].div);
+ prate *= 10000;
+
+ return prate;
+}
+
+static long clk_frac_round_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long *prate)
+{
+ struct clk_frac *frac = to_clk_frac(hw);
+ int unused;
+
+ return clk_round_rate_index(hw, drate, *prate, frac_calc_rate,
+ frac->rtbl_cnt, &unused);
+}
+
+static unsigned long clk_frac_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_frac *frac = to_clk_frac(hw);
+ unsigned long flags = 0;
+ unsigned int div = 1, val;
+
+ if (frac->lock)
+ spin_lock_irqsave(frac->lock, flags);
+
+ val = readl_relaxed(frac->reg);
+
+ if (frac->lock)
+ spin_unlock_irqrestore(frac->lock, flags);
+
+ div = val & DIV_FACTOR_MASK;
+
+ if (!div)
+ return 0;
+
+ parent_rate = parent_rate / 10000;
+
+ parent_rate = (parent_rate << 14) / (2 * div);
+ return parent_rate * 10000;
+}
+
+/* Configures new clock rate of frac */
+static int clk_frac_set_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long prate)
+{
+ struct clk_frac *frac = to_clk_frac(hw);
+ struct frac_rate_tbl *rtbl = frac->rtbl;
+ unsigned long flags = 0, val;
+ int i;
+
+ clk_round_rate_index(hw, drate, prate, frac_calc_rate, frac->rtbl_cnt,
+ &i);
+
+ if (frac->lock)
+ spin_lock_irqsave(frac->lock, flags);
+
+ val = readl_relaxed(frac->reg) & ~DIV_FACTOR_MASK;
+ val |= rtbl[i].div & DIV_FACTOR_MASK;
+ writel_relaxed(val, frac->reg);
+
+ if (frac->lock)
+ spin_unlock_irqrestore(frac->lock, flags);
+
+ return 0;
+}
+
+struct clk_ops clk_frac_ops = {
+ .recalc_rate = clk_frac_recalc_rate,
+ .round_rate = clk_frac_round_rate,
+ .set_rate = clk_frac_set_rate,
+};
+
+struct clk *clk_register_frac(const char *name, const char *parent_name,
+ unsigned long flags, void __iomem *reg,
+ struct frac_rate_tbl *rtbl, u8 rtbl_cnt, spinlock_t *lock)
+{
+ struct clk_init_data init;
+ struct clk_frac *frac;
+ struct clk *clk;
+
+ if (!name || !parent_name || !reg || !rtbl || !rtbl_cnt) {
+ pr_err("Invalid arguments passed");
+ return ERR_PTR(-EINVAL);
+ }
+
+ frac = kzalloc(sizeof(*frac), GFP_KERNEL);
+ if (!frac) {
+ pr_err("could not allocate frac clk\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ /* struct clk_frac assignments */
+ frac->reg = reg;
+ frac->rtbl = rtbl;
+ frac->rtbl_cnt = rtbl_cnt;
+ frac->lock = lock;
+ frac->hw.init = &init;
+
+ init.name = name;
+ init.ops = &clk_frac_ops;
+ init.flags = flags;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ clk = clk_register(NULL, &frac->hw);
+ if (!IS_ERR_OR_NULL(clk))
+ return clk;
+
+ pr_err("clk register failed\n");
+ kfree(frac);
+
+ return NULL;
+}
diff --git a/drivers/clk/spear/clk-gpt-synth.c b/drivers/clk/spear/clk-gpt-synth.c
new file mode 100644
index 000000000000..b471c9762a97
--- /dev/null
+++ b/drivers/clk/spear/clk-gpt-synth.c
@@ -0,0 +1,154 @@
+/*
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * General Purpose Timer Synthesizer clock implementation
+ */
+
+#define pr_fmt(fmt) "clk-gpt-synth: " fmt
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include "clk.h"
+
+#define GPT_MSCALE_MASK 0xFFF
+#define GPT_NSCALE_SHIFT 12
+#define GPT_NSCALE_MASK 0xF
+
+/*
+ * DOC: General Purpose Timer Synthesizer clock
+ *
+ * Calculates gpt synth clk rate for different values of mscale and nscale
+ *
+ * Fout= Fin/((2 ^ (N+1)) * (M+1))
+ */
+
+#define to_clk_gpt(_hw) container_of(_hw, struct clk_gpt, hw)
+
+static unsigned long gpt_calc_rate(struct clk_hw *hw, unsigned long prate,
+ int index)
+{
+ struct clk_gpt *gpt = to_clk_gpt(hw);
+ struct gpt_rate_tbl *rtbl = gpt->rtbl;
+
+ prate /= ((1 << (rtbl[index].nscale + 1)) * (rtbl[index].mscale + 1));
+
+ return prate;
+}
+
+static long clk_gpt_round_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long *prate)
+{
+ struct clk_gpt *gpt = to_clk_gpt(hw);
+ int unused;
+
+ return clk_round_rate_index(hw, drate, *prate, gpt_calc_rate,
+ gpt->rtbl_cnt, &unused);
+}
+
+static unsigned long clk_gpt_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_gpt *gpt = to_clk_gpt(hw);
+ unsigned long flags = 0;
+ unsigned int div = 1, val;
+
+ if (gpt->lock)
+ spin_lock_irqsave(gpt->lock, flags);
+
+ val = readl_relaxed(gpt->reg);
+
+ if (gpt->lock)
+ spin_unlock_irqrestore(gpt->lock, flags);
+
+ div += val & GPT_MSCALE_MASK;
+ div *= 1 << (((val >> GPT_NSCALE_SHIFT) & GPT_NSCALE_MASK) + 1);
+
+ if (!div)
+ return 0;
+
+ return parent_rate / div;
+}
+
+/* Configures new clock rate of gpt */
+static int clk_gpt_set_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long prate)
+{
+ struct clk_gpt *gpt = to_clk_gpt(hw);
+ struct gpt_rate_tbl *rtbl = gpt->rtbl;
+ unsigned long flags = 0, val;
+ int i;
+
+ clk_round_rate_index(hw, drate, prate, gpt_calc_rate, gpt->rtbl_cnt,
+ &i);
+
+ if (gpt->lock)
+ spin_lock_irqsave(gpt->lock, flags);
+
+ val = readl(gpt->reg) & ~GPT_MSCALE_MASK;
+ val &= ~(GPT_NSCALE_MASK << GPT_NSCALE_SHIFT);
+
+ val |= rtbl[i].mscale & GPT_MSCALE_MASK;
+ val |= (rtbl[i].nscale & GPT_NSCALE_MASK) << GPT_NSCALE_SHIFT;
+
+ writel_relaxed(val, gpt->reg);
+
+ if (gpt->lock)
+ spin_unlock_irqrestore(gpt->lock, flags);
+
+ return 0;
+}
+
+static struct clk_ops clk_gpt_ops = {
+ .recalc_rate = clk_gpt_recalc_rate,
+ .round_rate = clk_gpt_round_rate,
+ .set_rate = clk_gpt_set_rate,
+};
+
+struct clk *clk_register_gpt(const char *name, const char *parent_name, unsigned
+ long flags, void __iomem *reg, struct gpt_rate_tbl *rtbl, u8
+ rtbl_cnt, spinlock_t *lock)
+{
+ struct clk_init_data init;
+ struct clk_gpt *gpt;
+ struct clk *clk;
+
+ if (!name || !parent_name || !reg || !rtbl || !rtbl_cnt) {
+ pr_err("Invalid arguments passed");
+ return ERR_PTR(-EINVAL);
+ }
+
+ gpt = kzalloc(sizeof(*gpt), GFP_KERNEL);
+ if (!gpt) {
+ pr_err("could not allocate gpt clk\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ /* struct clk_gpt assignments */
+ gpt->reg = reg;
+ gpt->rtbl = rtbl;
+ gpt->rtbl_cnt = rtbl_cnt;
+ gpt->lock = lock;
+ gpt->hw.init = &init;
+
+ init.name = name;
+ init.ops = &clk_gpt_ops;
+ init.flags = flags;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ clk = clk_register(NULL, &gpt->hw);
+ if (!IS_ERR_OR_NULL(clk))
+ return clk;
+
+ pr_err("clk register failed\n");
+ kfree(gpt);
+
+ return NULL;
+}
diff --git a/drivers/clk/spear/clk-vco-pll.c b/drivers/clk/spear/clk-vco-pll.c
new file mode 100644
index 000000000000..dcd4bdf4b0d9
--- /dev/null
+++ b/drivers/clk/spear/clk-vco-pll.c
@@ -0,0 +1,363 @@
+/*
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * VCO-PLL clock implementation
+ */
+
+#define pr_fmt(fmt) "clk-vco-pll: " fmt
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include "clk.h"
+
+/*
+ * DOC: VCO-PLL clock
+ *
+ * VCO and PLL rate are derived from following equations:
+ *
+ * In normal mode
+ * vco = (2 * M[15:8] * Fin)/N
+ *
+ * In Dithered mode
+ * vco = (2 * M[15:0] * Fin)/(256 * N)
+ *
+ * pll_rate = pll/2^p
+ *
+ * vco and pll are very closely bound to each other, "vco needs to program:
+ * mode, m & n" and "pll needs to program p", both share common enable/disable
+ * logic.
+ *
+ * clk_register_vco_pll() registers instances of both vco & pll.
+ * CLK_SET_RATE_PARENT flag is forced for pll, as it will always pass its
+ * set_rate to vco. A single rate table exists for both the clocks, which
+ * configures m, n and p.
+ */
+
+/* PLL_CTR register masks */
+#define PLL_MODE_NORMAL 0
+#define PLL_MODE_FRACTION 1
+#define PLL_MODE_DITH_DSM 2
+#define PLL_MODE_DITH_SSM 3
+#define PLL_MODE_MASK 3
+#define PLL_MODE_SHIFT 3
+#define PLL_ENABLE 2
+
+#define PLL_LOCK_SHIFT 0
+#define PLL_LOCK_MASK 1
+
+/* PLL FRQ register masks */
+#define PLL_NORM_FDBK_M_MASK 0xFF
+#define PLL_NORM_FDBK_M_SHIFT 24
+#define PLL_DITH_FDBK_M_MASK 0xFFFF
+#define PLL_DITH_FDBK_M_SHIFT 16
+#define PLL_DIV_P_MASK 0x7
+#define PLL_DIV_P_SHIFT 8
+#define PLL_DIV_N_MASK 0xFF
+#define PLL_DIV_N_SHIFT 0
+
+#define to_clk_vco(_hw) container_of(_hw, struct clk_vco, hw)
+#define to_clk_pll(_hw) container_of(_hw, struct clk_pll, hw)
+
+/* Calculates pll clk rate for specific value of mode, m, n and p */
+static unsigned long pll_calc_rate(struct pll_rate_tbl *rtbl,
+ unsigned long prate, int index, unsigned long *pll_rate)
+{
+ unsigned long rate = prate;
+ unsigned int mode;
+
+ mode = rtbl[index].mode ? 256 : 1;
+ rate = (((2 * rate / 10000) * rtbl[index].m) / (mode * rtbl[index].n));
+
+ if (pll_rate)
+ *pll_rate = (rate / (1 << rtbl[index].p)) * 10000;
+
+ return rate * 10000;
+}
+
+static long clk_pll_round_rate_index(struct clk_hw *hw, unsigned long drate,
+ unsigned long *prate, int *index)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+ unsigned long prev_rate, vco_prev_rate, rate = 0;
+ unsigned long vco_parent_rate =
+ __clk_get_rate(__clk_get_parent(__clk_get_parent(hw->clk)));
+
+ if (!prate) {
+ pr_err("%s: prate is must for pll clk\n", __func__);
+ return -EINVAL;
+ }
+
+ for (*index = 0; *index < pll->vco->rtbl_cnt; (*index)++) {
+ prev_rate = rate;
+ vco_prev_rate = *prate;
+ *prate = pll_calc_rate(pll->vco->rtbl, vco_parent_rate, *index,
+ &rate);
+ if (drate < rate) {
+ /* previous clock was best */
+ if (*index) {
+ rate = prev_rate;
+ *prate = vco_prev_rate;
+ (*index)--;
+ }
+ break;
+ }
+ }
+
+ return rate;
+}
+
+static long clk_pll_round_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long *prate)
+{
+ int unused;
+
+ return clk_pll_round_rate_index(hw, drate, prate, &unused);
+}
+
+static unsigned long clk_pll_recalc_rate(struct clk_hw *hw, unsigned long
+ parent_rate)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+ unsigned long flags = 0;
+ unsigned int p;
+
+ if (pll->vco->lock)
+ spin_lock_irqsave(pll->vco->lock, flags);
+
+ p = readl_relaxed(pll->vco->cfg_reg);
+
+ if (pll->vco->lock)
+ spin_unlock_irqrestore(pll->vco->lock, flags);
+
+ p = (p >> PLL_DIV_P_SHIFT) & PLL_DIV_P_MASK;
+
+ return parent_rate / (1 << p);
+}
+
+static int clk_pll_set_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long prate)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+ struct pll_rate_tbl *rtbl = pll->vco->rtbl;
+ unsigned long flags = 0, val;
+ int i;
+
+ clk_pll_round_rate_index(hw, drate, NULL, &i);
+
+ if (pll->vco->lock)
+ spin_lock_irqsave(pll->vco->lock, flags);
+
+ val = readl_relaxed(pll->vco->cfg_reg);
+ val &= ~(PLL_DIV_P_MASK << PLL_DIV_P_SHIFT);
+ val |= (rtbl[i].p & PLL_DIV_P_MASK) << PLL_DIV_P_SHIFT;
+ writel_relaxed(val, pll->vco->cfg_reg);
+
+ if (pll->vco->lock)
+ spin_unlock_irqrestore(pll->vco->lock, flags);
+
+ return 0;
+}
+
+static struct clk_ops clk_pll_ops = {
+ .recalc_rate = clk_pll_recalc_rate,
+ .round_rate = clk_pll_round_rate,
+ .set_rate = clk_pll_set_rate,
+};
+
+static inline unsigned long vco_calc_rate(struct clk_hw *hw,
+ unsigned long prate, int index)
+{
+ struct clk_vco *vco = to_clk_vco(hw);
+
+ return pll_calc_rate(vco->rtbl, prate, index, NULL);
+}
+
+static long clk_vco_round_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long *prate)
+{
+ struct clk_vco *vco = to_clk_vco(hw);
+ int unused;
+
+ return clk_round_rate_index(hw, drate, *prate, vco_calc_rate,
+ vco->rtbl_cnt, &unused);
+}
+
+static unsigned long clk_vco_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_vco *vco = to_clk_vco(hw);
+ unsigned long flags = 0;
+ unsigned int num = 2, den = 0, val, mode = 0;
+
+ if (vco->lock)
+ spin_lock_irqsave(vco->lock, flags);
+
+ mode = (readl_relaxed(vco->mode_reg) >> PLL_MODE_SHIFT) & PLL_MODE_MASK;
+
+ val = readl_relaxed(vco->cfg_reg);
+
+ if (vco->lock)
+ spin_unlock_irqrestore(vco->lock, flags);
+
+ den = (val >> PLL_DIV_N_SHIFT) & PLL_DIV_N_MASK;
+
+ /* calculate numerator & denominator */
+ if (!mode) {
+ /* Normal mode */
+ num *= (val >> PLL_NORM_FDBK_M_SHIFT) & PLL_NORM_FDBK_M_MASK;
+ } else {
+ /* Dithered mode */
+ num *= (val >> PLL_DITH_FDBK_M_SHIFT) & PLL_DITH_FDBK_M_MASK;
+ den *= 256;
+ }
+
+ if (!den) {
+ WARN(1, "%s: denominator can't be zero\n", __func__);
+ return 0;
+ }
+
+ return (((parent_rate / 10000) * num) / den) * 10000;
+}
+
+/* Configures new clock rate of vco */
+static int clk_vco_set_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long prate)
+{
+ struct clk_vco *vco = to_clk_vco(hw);
+ struct pll_rate_tbl *rtbl = vco->rtbl;
+ unsigned long flags = 0, val;
+ int i;
+
+ clk_round_rate_index(hw, drate, prate, vco_calc_rate, vco->rtbl_cnt,
+ &i);
+
+ if (vco->lock)
+ spin_lock_irqsave(vco->lock, flags);
+
+ val = readl_relaxed(vco->mode_reg);
+ val &= ~(PLL_MODE_MASK << PLL_MODE_SHIFT);
+ val |= (rtbl[i].mode & PLL_MODE_MASK) << PLL_MODE_SHIFT;
+ writel_relaxed(val, vco->mode_reg);
+
+ val = readl_relaxed(vco->cfg_reg);
+ val &= ~(PLL_DIV_N_MASK << PLL_DIV_N_SHIFT);
+ val |= (rtbl[i].n & PLL_DIV_N_MASK) << PLL_DIV_N_SHIFT;
+
+ val &= ~(PLL_DITH_FDBK_M_MASK << PLL_DITH_FDBK_M_SHIFT);
+ if (rtbl[i].mode)
+ val |= (rtbl[i].m & PLL_DITH_FDBK_M_MASK) <<
+ PLL_DITH_FDBK_M_SHIFT;
+ else
+ val |= (rtbl[i].m & PLL_NORM_FDBK_M_MASK) <<
+ PLL_NORM_FDBK_M_SHIFT;
+
+ writel_relaxed(val, vco->cfg_reg);
+
+ if (vco->lock)
+ spin_unlock_irqrestore(vco->lock, flags);
+
+ return 0;
+}
+
+static struct clk_ops clk_vco_ops = {
+ .recalc_rate = clk_vco_recalc_rate,
+ .round_rate = clk_vco_round_rate,
+ .set_rate = clk_vco_set_rate,
+};
+
+struct clk *clk_register_vco_pll(const char *vco_name, const char *pll_name,
+ const char *vco_gate_name, const char *parent_name,
+ unsigned long flags, void __iomem *mode_reg, void __iomem
+ *cfg_reg, struct pll_rate_tbl *rtbl, u8 rtbl_cnt,
+ spinlock_t *lock, struct clk **pll_clk,
+ struct clk **vco_gate_clk)
+{
+ struct clk_vco *vco;
+ struct clk_pll *pll;
+ struct clk *vco_clk, *tpll_clk, *tvco_gate_clk;
+ struct clk_init_data vco_init, pll_init;
+ const char **vco_parent_name;
+
+ if (!vco_name || !pll_name || !parent_name || !mode_reg || !cfg_reg ||
+ !rtbl || !rtbl_cnt) {
+ pr_err("Invalid arguments passed");
+ return ERR_PTR(-EINVAL);
+ }
+
+ vco = kzalloc(sizeof(*vco), GFP_KERNEL);
+ if (!vco) {
+ pr_err("could not allocate vco clk\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll) {
+ pr_err("could not allocate pll clk\n");
+ goto free_vco;
+ }
+
+ /* struct clk_vco assignments */
+ vco->mode_reg = mode_reg;
+ vco->cfg_reg = cfg_reg;
+ vco->rtbl = rtbl;
+ vco->rtbl_cnt = rtbl_cnt;
+ vco->lock = lock;
+ vco->hw.init = &vco_init;
+
+ pll->vco = vco;
+ pll->hw.init = &pll_init;
+
+ if (vco_gate_name) {
+ tvco_gate_clk = clk_register_gate(NULL, vco_gate_name,
+ parent_name, 0, mode_reg, PLL_ENABLE, 0, lock);
+ if (IS_ERR_OR_NULL(tvco_gate_clk))
+ goto free_pll;
+
+ if (vco_gate_clk)
+ *vco_gate_clk = tvco_gate_clk;
+ vco_parent_name = &vco_gate_name;
+ } else {
+ vco_parent_name = &parent_name;
+ }
+
+ vco_init.name = vco_name;
+ vco_init.ops = &clk_vco_ops;
+ vco_init.flags = flags;
+ vco_init.parent_names = vco_parent_name;
+ vco_init.num_parents = 1;
+
+ pll_init.name = pll_name;
+ pll_init.ops = &clk_pll_ops;
+ pll_init.flags = CLK_SET_RATE_PARENT;
+ pll_init.parent_names = &vco_name;
+ pll_init.num_parents = 1;
+
+ vco_clk = clk_register(NULL, &vco->hw);
+ if (IS_ERR_OR_NULL(vco_clk))
+ goto free_pll;
+
+ tpll_clk = clk_register(NULL, &pll->hw);
+ if (IS_ERR_OR_NULL(tpll_clk))
+ goto free_pll;
+
+ if (pll_clk)
+ *pll_clk = tpll_clk;
+
+ return vco_clk;
+
+free_pll:
+ kfree(pll);
+free_vco:
+ kfree(vco);
+
+ pr_err("Failed to register vco pll clock\n");
+
+ return ERR_PTR(-ENOMEM);
+}
diff --git a/drivers/clk/spear/clk.c b/drivers/clk/spear/clk.c
new file mode 100644
index 000000000000..376d4e5ff326
--- /dev/null
+++ b/drivers/clk/spear/clk.c
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * SPEAr clk - Common routines
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/types.h>
+#include "clk.h"
+
+long clk_round_rate_index(struct clk_hw *hw, unsigned long drate,
+ unsigned long parent_rate, clk_calc_rate calc_rate, u8 rtbl_cnt,
+ int *index)
+{
+ unsigned long prev_rate, rate = 0;
+
+ for (*index = 0; *index < rtbl_cnt; (*index)++) {
+ prev_rate = rate;
+ rate = calc_rate(hw, parent_rate, *index);
+ if (drate < rate) {
+ /* previous clock was best */
+ if (*index) {
+ rate = prev_rate;
+ (*index)--;
+ }
+ break;
+ }
+ }
+
+ return rate;
+}
diff --git a/drivers/clk/spear/clk.h b/drivers/clk/spear/clk.h
new file mode 100644
index 000000000000..3321c46a071c
--- /dev/null
+++ b/drivers/clk/spear/clk.h
@@ -0,0 +1,134 @@
+/*
+ * Clock framework definitions for SPEAr platform
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __SPEAR_CLK_H
+#define __SPEAR_CLK_H
+
+#include <linux/clk-provider.h>
+#include <linux/spinlock_types.h>
+#include <linux/types.h>
+
+/* Auxiliary Synth clk */
+/* Default masks */
+#define AUX_EQ_SEL_SHIFT 30
+#define AUX_EQ_SEL_MASK 1
+#define AUX_EQ1_SEL 0
+#define AUX_EQ2_SEL 1
+#define AUX_XSCALE_SHIFT 16
+#define AUX_XSCALE_MASK 0xFFF
+#define AUX_YSCALE_SHIFT 0
+#define AUX_YSCALE_MASK 0xFFF
+#define AUX_SYNT_ENB 31
+
+struct aux_clk_masks {
+ u32 eq_sel_mask;
+ u32 eq_sel_shift;
+ u32 eq1_mask;
+ u32 eq2_mask;
+ u32 xscale_sel_mask;
+ u32 xscale_sel_shift;
+ u32 yscale_sel_mask;
+ u32 yscale_sel_shift;
+ u32 enable_bit;
+};
+
+struct aux_rate_tbl {
+ u16 xscale;
+ u16 yscale;
+ u8 eq;
+};
+
+struct clk_aux {
+ struct clk_hw hw;
+ void __iomem *reg;
+ struct aux_clk_masks *masks;
+ struct aux_rate_tbl *rtbl;
+ u8 rtbl_cnt;
+ spinlock_t *lock;
+};
+
+/* Fractional Synth clk */
+struct frac_rate_tbl {
+ u32 div;
+};
+
+struct clk_frac {
+ struct clk_hw hw;
+ void __iomem *reg;
+ struct frac_rate_tbl *rtbl;
+ u8 rtbl_cnt;
+ spinlock_t *lock;
+};
+
+/* GPT clk */
+struct gpt_rate_tbl {
+ u16 mscale;
+ u16 nscale;
+};
+
+struct clk_gpt {
+ struct clk_hw hw;
+ void __iomem *reg;
+ struct gpt_rate_tbl *rtbl;
+ u8 rtbl_cnt;
+ spinlock_t *lock;
+};
+
+/* VCO-PLL clk */
+struct pll_rate_tbl {
+ u8 mode;
+ u16 m;
+ u8 n;
+ u8 p;
+};
+
+struct clk_vco {
+ struct clk_hw hw;
+ void __iomem *mode_reg;
+ void __iomem *cfg_reg;
+ struct pll_rate_tbl *rtbl;
+ u8 rtbl_cnt;
+ spinlock_t *lock;
+};
+
+struct clk_pll {
+ struct clk_hw hw;
+ struct clk_vco *vco;
+ const char *parent[1];
+ spinlock_t *lock;
+};
+
+typedef unsigned long (*clk_calc_rate)(struct clk_hw *hw, unsigned long prate,
+ int index);
+
+/* clk register routines */
+struct clk *clk_register_aux(const char *aux_name, const char *gate_name,
+ const char *parent_name, unsigned long flags, void __iomem *reg,
+ struct aux_clk_masks *masks, struct aux_rate_tbl *rtbl,
+ u8 rtbl_cnt, spinlock_t *lock, struct clk **gate_clk);
+struct clk *clk_register_frac(const char *name, const char *parent_name,
+ unsigned long flags, void __iomem *reg,
+ struct frac_rate_tbl *rtbl, u8 rtbl_cnt, spinlock_t *lock);
+struct clk *clk_register_gpt(const char *name, const char *parent_name, unsigned
+ long flags, void __iomem *reg, struct gpt_rate_tbl *rtbl, u8
+ rtbl_cnt, spinlock_t *lock);
+struct clk *clk_register_vco_pll(const char *vco_name, const char *pll_name,
+ const char *vco_gate_name, const char *parent_name,
+ unsigned long flags, void __iomem *mode_reg, void __iomem
+ *cfg_reg, struct pll_rate_tbl *rtbl, u8 rtbl_cnt,
+ spinlock_t *lock, struct clk **pll_clk,
+ struct clk **vco_gate_clk);
+
+long clk_round_rate_index(struct clk_hw *hw, unsigned long drate,
+ unsigned long parent_rate, clk_calc_rate calc_rate, u8 rtbl_cnt,
+ int *index);
+
+#endif /* __SPEAR_CLK_H */
diff --git a/drivers/clk/spear/spear3xx_clock.c b/drivers/clk/spear/spear3xx_clock.c
new file mode 100644
index 000000000000..440bb3e4c971
--- /dev/null
+++ b/drivers/clk/spear/spear3xx_clock.c
@@ -0,0 +1,612 @@
+/*
+ * SPEAr3xx machines clock framework source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/spinlock_types.h>
+#include <mach/misc_regs.h>
+#include "clk.h"
+
+static DEFINE_SPINLOCK(_lock);
+
+#define PLL1_CTR (MISC_BASE + 0x008)
+#define PLL1_FRQ (MISC_BASE + 0x00C)
+#define PLL2_CTR (MISC_BASE + 0x014)
+#define PLL2_FRQ (MISC_BASE + 0x018)
+#define PLL_CLK_CFG (MISC_BASE + 0x020)
+ /* PLL_CLK_CFG register masks */
+ #define MCTR_CLK_SHIFT 28
+ #define MCTR_CLK_MASK 3
+
+#define CORE_CLK_CFG (MISC_BASE + 0x024)
+ /* CORE CLK CFG register masks */
+ #define GEN_SYNTH2_3_CLK_SHIFT 18
+ #define GEN_SYNTH2_3_CLK_MASK 1
+
+ #define HCLK_RATIO_SHIFT 10
+ #define HCLK_RATIO_MASK 2
+ #define PCLK_RATIO_SHIFT 8
+ #define PCLK_RATIO_MASK 2
+
+#define PERIP_CLK_CFG (MISC_BASE + 0x028)
+ /* PERIP_CLK_CFG register masks */
+ #define UART_CLK_SHIFT 4
+ #define UART_CLK_MASK 1
+ #define FIRDA_CLK_SHIFT 5
+ #define FIRDA_CLK_MASK 2
+ #define GPT0_CLK_SHIFT 8
+ #define GPT1_CLK_SHIFT 11
+ #define GPT2_CLK_SHIFT 12
+ #define GPT_CLK_MASK 1
+
+#define PERIP1_CLK_ENB (MISC_BASE + 0x02C)
+ /* PERIP1_CLK_ENB register masks */
+ #define UART_CLK_ENB 3
+ #define SSP_CLK_ENB 5
+ #define I2C_CLK_ENB 7
+ #define JPEG_CLK_ENB 8
+ #define FIRDA_CLK_ENB 10
+ #define GPT1_CLK_ENB 11
+ #define GPT2_CLK_ENB 12
+ #define ADC_CLK_ENB 15
+ #define RTC_CLK_ENB 17
+ #define GPIO_CLK_ENB 18
+ #define DMA_CLK_ENB 19
+ #define SMI_CLK_ENB 21
+ #define GMAC_CLK_ENB 23
+ #define USBD_CLK_ENB 24
+ #define USBH_CLK_ENB 25
+ #define C3_CLK_ENB 31
+
+#define RAS_CLK_ENB (MISC_BASE + 0x034)
+ #define RAS_AHB_CLK_ENB 0
+ #define RAS_PLL1_CLK_ENB 1
+ #define RAS_APB_CLK_ENB 2
+ #define RAS_32K_CLK_ENB 3
+ #define RAS_24M_CLK_ENB 4
+ #define RAS_48M_CLK_ENB 5
+ #define RAS_PLL2_CLK_ENB 7
+ #define RAS_SYNT0_CLK_ENB 8
+ #define RAS_SYNT1_CLK_ENB 9
+ #define RAS_SYNT2_CLK_ENB 10
+ #define RAS_SYNT3_CLK_ENB 11
+
+#define PRSC0_CLK_CFG (MISC_BASE + 0x044)
+#define PRSC1_CLK_CFG (MISC_BASE + 0x048)
+#define PRSC2_CLK_CFG (MISC_BASE + 0x04C)
+#define AMEM_CLK_CFG (MISC_BASE + 0x050)
+ #define AMEM_CLK_ENB 0
+
+#define CLCD_CLK_SYNT (MISC_BASE + 0x05C)
+#define FIRDA_CLK_SYNT (MISC_BASE + 0x060)
+#define UART_CLK_SYNT (MISC_BASE + 0x064)
+#define GMAC_CLK_SYNT (MISC_BASE + 0x068)
+#define GEN0_CLK_SYNT (MISC_BASE + 0x06C)
+#define GEN1_CLK_SYNT (MISC_BASE + 0x070)
+#define GEN2_CLK_SYNT (MISC_BASE + 0x074)
+#define GEN3_CLK_SYNT (MISC_BASE + 0x078)
+
+/* pll rate configuration table, in ascending order of rates */
+static struct pll_rate_tbl pll_rtbl[] = {
+ {.mode = 0, .m = 0x53, .n = 0x0C, .p = 0x1}, /* vco 332 & pll 166 MHz */
+ {.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* vco 532 & pll 266 MHz */
+ {.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* vco 664 & pll 332 MHz */
+};
+
+/* aux rate configuration table, in ascending order of rates */
+static struct aux_rate_tbl aux_rtbl[] = {
+ /* For PLL1 = 332 MHz */
+ {.xscale = 2, .yscale = 27, .eq = 0}, /* 12.296 MHz */
+ {.xscale = 2, .yscale = 8, .eq = 0}, /* 41.5 MHz */
+ {.xscale = 2, .yscale = 4, .eq = 0}, /* 83 MHz */
+ {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
+};
+
+/* gpt rate configuration table, in ascending order of rates */
+static struct gpt_rate_tbl gpt_rtbl[] = {
+ /* For pll1 = 332 MHz */
+ {.mscale = 4, .nscale = 0}, /* 41.5 MHz */
+ {.mscale = 2, .nscale = 0}, /* 55.3 MHz */
+ {.mscale = 1, .nscale = 0}, /* 83 MHz */
+};
+
+/* clock parents */
+static const char *uart0_parents[] = { "pll3_48m_clk", "uart_synth_gate_clk", };
+static const char *firda_parents[] = { "pll3_48m_clk", "firda_synth_gate_clk",
+};
+static const char *gpt0_parents[] = { "pll3_48m_clk", "gpt0_synth_clk", };
+static const char *gpt1_parents[] = { "pll3_48m_clk", "gpt1_synth_clk", };
+static const char *gpt2_parents[] = { "pll3_48m_clk", "gpt2_synth_clk", };
+static const char *gen2_3_parents[] = { "pll1_clk", "pll2_clk", };
+static const char *ddr_parents[] = { "ahb_clk", "ahbmult2_clk", "none",
+ "pll2_clk", };
+
+#ifdef CONFIG_MACH_SPEAR300
+static void __init spear300_clk_init(void)
+{
+ struct clk *clk;
+
+ clk = clk_register_fixed_factor(NULL, "clcd_clk", "ras_pll3_48m_clk", 0,
+ 1, 1);
+ clk_register_clkdev(clk, NULL, "60000000.clcd");
+
+ clk = clk_register_fixed_factor(NULL, "fsmc_clk", "ras_ahb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "94000000.flash");
+
+ clk = clk_register_fixed_factor(NULL, "sdhci_clk", "ras_ahb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "70000000.sdhci");
+
+ clk = clk_register_fixed_factor(NULL, "gpio1_clk", "ras_apb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "a9000000.gpio");
+
+ clk = clk_register_fixed_factor(NULL, "kbd_clk", "ras_apb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "a0000000.kbd");
+}
+#endif
+
+/* array of all spear 310 clock lookups */
+#ifdef CONFIG_MACH_SPEAR310
+static void __init spear310_clk_init(void)
+{
+ struct clk *clk;
+
+ clk = clk_register_fixed_factor(NULL, "emi_clk", "ras_ahb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, "emi", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "fsmc_clk", "ras_ahb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "44000000.flash");
+
+ clk = clk_register_fixed_factor(NULL, "tdm_clk", "ras_ahb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "tdm");
+
+ clk = clk_register_fixed_factor(NULL, "uart1_clk", "ras_apb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "b2000000.serial");
+
+ clk = clk_register_fixed_factor(NULL, "uart2_clk", "ras_apb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "b2080000.serial");
+
+ clk = clk_register_fixed_factor(NULL, "uart3_clk", "ras_apb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "b2100000.serial");
+
+ clk = clk_register_fixed_factor(NULL, "uart4_clk", "ras_apb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "b2180000.serial");
+
+ clk = clk_register_fixed_factor(NULL, "uart5_clk", "ras_apb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "b2200000.serial");
+}
+#endif
+
+/* array of all spear 320 clock lookups */
+#ifdef CONFIG_MACH_SPEAR320
+ #define SMII_PCLK_SHIFT 18
+ #define SMII_PCLK_MASK 2
+ #define SMII_PCLK_VAL_PAD 0x0
+ #define SMII_PCLK_VAL_PLL2 0x1
+ #define SMII_PCLK_VAL_SYNTH0 0x2
+ #define SDHCI_PCLK_SHIFT 15
+ #define SDHCI_PCLK_MASK 1
+ #define SDHCI_PCLK_VAL_48M 0x0
+ #define SDHCI_PCLK_VAL_SYNTH3 0x1
+ #define I2S_REF_PCLK_SHIFT 8
+ #define I2S_REF_PCLK_MASK 1
+ #define I2S_REF_PCLK_SYNTH_VAL 0x1
+ #define I2S_REF_PCLK_PLL2_VAL 0x0
+ #define UART1_PCLK_SHIFT 6
+ #define UART1_PCLK_MASK 1
+ #define SPEAR320_UARTX_PCLK_VAL_SYNTH1 0x0
+ #define SPEAR320_UARTX_PCLK_VAL_APB 0x1
+
+static const char *i2s_ref_parents[] = { "ras_pll2_clk",
+ "ras_gen2_synth_gate_clk", };
+static const char *sdhci_parents[] = { "ras_pll3_48m_clk",
+ "ras_gen3_synth_gate_clk",
+};
+static const char *smii0_parents[] = { "smii_125m_pad", "ras_pll2_clk",
+ "ras_gen0_synth_gate_clk", };
+static const char *uartx_parents[] = { "ras_gen1_synth_gate_clk", "ras_apb_clk",
+};
+
+static void __init spear320_clk_init(void)
+{
+ struct clk *clk;
+
+ clk = clk_register_fixed_rate(NULL, "smii_125m_pad_clk", NULL,
+ CLK_IS_ROOT, 125000000);
+ clk_register_clkdev(clk, "smii_125m_pad", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "clcd_clk", "ras_pll3_48m_clk", 0,
+ 1, 1);
+ clk_register_clkdev(clk, NULL, "90000000.clcd");
+
+ clk = clk_register_fixed_factor(NULL, "emi_clk", "ras_ahb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, "emi", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "fsmc_clk", "ras_ahb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "4c000000.flash");
+
+ clk = clk_register_fixed_factor(NULL, "i2c1_clk", "ras_ahb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "a7000000.i2c");
+
+ clk = clk_register_fixed_factor(NULL, "pwm_clk", "ras_ahb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, "pwm", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "ssp1_clk", "ras_ahb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "a5000000.spi");
+
+ clk = clk_register_fixed_factor(NULL, "ssp2_clk", "ras_ahb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "a6000000.spi");
+
+ clk = clk_register_fixed_factor(NULL, "can0_clk", "ras_apb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "c_can_platform.0");
+
+ clk = clk_register_fixed_factor(NULL, "can1_clk", "ras_apb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "c_can_platform.1");
+
+ clk = clk_register_fixed_factor(NULL, "i2s_clk", "ras_apb_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "i2s");
+
+ clk = clk_register_mux(NULL, "i2s_ref_clk", i2s_ref_parents,
+ ARRAY_SIZE(i2s_ref_parents), 0, SPEAR320_CONTROL_REG,
+ I2S_REF_PCLK_SHIFT, I2S_REF_PCLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "i2s_ref_clk", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "i2s_sclk", "i2s_ref_clk", 0, 1,
+ 4);
+ clk_register_clkdev(clk, "i2s_sclk", NULL);
+
+ clk = clk_register_mux(NULL, "rs485_clk", uartx_parents,
+ ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
+ SPEAR320_RS485_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "a9300000.serial");
+
+ clk = clk_register_mux(NULL, "sdhci_clk", sdhci_parents,
+ ARRAY_SIZE(sdhci_parents), 0, SPEAR320_CONTROL_REG,
+ SDHCI_PCLK_SHIFT, SDHCI_PCLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "70000000.sdhci");
+
+ clk = clk_register_mux(NULL, "smii_pclk", smii0_parents,
+ ARRAY_SIZE(smii0_parents), 0, SPEAR320_CONTROL_REG,
+ SMII_PCLK_SHIFT, SMII_PCLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "smii_pclk");
+
+ clk = clk_register_fixed_factor(NULL, "smii_clk", "smii_pclk", 0, 1, 1);
+ clk_register_clkdev(clk, NULL, "smii");
+
+ clk = clk_register_mux(NULL, "uart1_clk", uartx_parents,
+ ARRAY_SIZE(uartx_parents), 0, SPEAR320_CONTROL_REG,
+ UART1_PCLK_SHIFT, UART1_PCLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "a3000000.serial");
+
+ clk = clk_register_mux(NULL, "uart2_clk", uartx_parents,
+ ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
+ SPEAR320_UART2_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "a4000000.serial");
+
+ clk = clk_register_mux(NULL, "uart3_clk", uartx_parents,
+ ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
+ SPEAR320_UART3_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "a9100000.serial");
+
+ clk = clk_register_mux(NULL, "uart4_clk", uartx_parents,
+ ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
+ SPEAR320_UART4_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "a9200000.serial");
+
+ clk = clk_register_mux(NULL, "uart5_clk", uartx_parents,
+ ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
+ SPEAR320_UART5_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "60000000.serial");
+
+ clk = clk_register_mux(NULL, "uart6_clk", uartx_parents,
+ ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG,
+ SPEAR320_UART6_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, NULL, "60100000.serial");
+}
+#endif
+
+void __init spear3xx_clk_init(void)
+{
+ struct clk *clk, *clk1;
+
+ clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
+ clk_register_clkdev(clk, "apb_pclk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT,
+ 32000);
+ clk_register_clkdev(clk, "osc_32k_clk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "osc_24m_clk", NULL, CLK_IS_ROOT,
+ 24000000);
+ clk_register_clkdev(clk, "osc_24m_clk", NULL);
+
+ /* clock derived from 32 KHz osc clk */
+ clk = clk_register_gate(NULL, "rtc-spear", "osc_32k_clk", 0,
+ PERIP1_CLK_ENB, RTC_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "fc900000.rtc");
+
+ /* clock derived from 24 MHz osc clk */
+ clk = clk_register_fixed_rate(NULL, "pll3_48m_clk", "osc_24m_clk", 0,
+ 48000000);
+ clk_register_clkdev(clk, "pll3_48m_clk", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "wdt_clk", "osc_24m_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "fc880000.wdt");
+
+ clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL,
+ "osc_24m_clk", 0, PLL1_CTR, PLL1_FRQ, pll_rtbl,
+ ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
+ clk_register_clkdev(clk, "vco1_clk", NULL);
+ clk_register_clkdev(clk1, "pll1_clk", NULL);
+
+ clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL,
+ "osc_24m_clk", 0, PLL2_CTR, PLL2_FRQ, pll_rtbl,
+ ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
+ clk_register_clkdev(clk, "vco2_clk", NULL);
+ clk_register_clkdev(clk1, "pll2_clk", NULL);
+
+ /* clock derived from pll1 clk */
+ clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk", 0, 1, 1);
+ clk_register_clkdev(clk, "cpu_clk", NULL);
+
+ clk = clk_register_divider(NULL, "ahb_clk", "pll1_clk",
+ CLK_SET_RATE_PARENT, CORE_CLK_CFG, HCLK_RATIO_SHIFT,
+ HCLK_RATIO_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "ahb_clk", NULL);
+
+ clk = clk_register_aux("uart_synth_clk", "uart_synth_gate_clk",
+ "pll1_clk", 0, UART_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "uart_synth_clk", NULL);
+ clk_register_clkdev(clk1, "uart_synth_gate_clk", NULL);
+
+ clk = clk_register_mux(NULL, "uart0_mux_clk", uart0_parents,
+ ARRAY_SIZE(uart0_parents), 0, PERIP_CLK_CFG,
+ UART_CLK_SHIFT, UART_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "uart0_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "uart0", "uart0_mux_clk", 0,
+ PERIP1_CLK_ENB, UART_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "d0000000.serial");
+
+ clk = clk_register_aux("firda_synth_clk", "firda_synth_gate_clk",
+ "pll1_clk", 0, FIRDA_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "firda_synth_clk", NULL);
+ clk_register_clkdev(clk1, "firda_synth_gate_clk", NULL);
+
+ clk = clk_register_mux(NULL, "firda_mux_clk", firda_parents,
+ ARRAY_SIZE(firda_parents), 0, PERIP_CLK_CFG,
+ FIRDA_CLK_SHIFT, FIRDA_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "firda_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "firda_clk", "firda_mux_clk", 0,
+ PERIP1_CLK_ENB, FIRDA_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "firda");
+
+ /* gpt clocks */
+ clk_register_gpt("gpt0_synth_clk", "pll1_clk", 0, PRSC0_CLK_CFG,
+ gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
+ clk = clk_register_mux(NULL, "gpt0_clk", gpt0_parents,
+ ARRAY_SIZE(gpt0_parents), 0, PERIP_CLK_CFG,
+ GPT0_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "gpt0");
+
+ clk_register_gpt("gpt1_synth_clk", "pll1_clk", 0, PRSC1_CLK_CFG,
+ gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
+ clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt1_parents,
+ ARRAY_SIZE(gpt1_parents), 0, PERIP_CLK_CFG,
+ GPT1_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "gpt1_mux_clk", NULL);
+ clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0,
+ PERIP1_CLK_ENB, GPT1_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "gpt1");
+
+ clk_register_gpt("gpt2_synth_clk", "pll1_clk", 0, PRSC2_CLK_CFG,
+ gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
+ clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt2_parents,
+ ARRAY_SIZE(gpt2_parents), 0, PERIP_CLK_CFG,
+ GPT2_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "gpt2_mux_clk", NULL);
+ clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0,
+ PERIP1_CLK_ENB, GPT2_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "gpt2");
+
+ /* general synths clocks */
+ clk = clk_register_aux("gen0_synth_clk", "gen0_synth_gate_clk",
+ "pll1_clk", 0, GEN0_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "gen0_synth_clk", NULL);
+ clk_register_clkdev(clk1, "gen0_synth_gate_clk", NULL);
+
+ clk = clk_register_aux("gen1_synth_clk", "gen1_synth_gate_clk",
+ "pll1_clk", 0, GEN1_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "gen1_synth_clk", NULL);
+ clk_register_clkdev(clk1, "gen1_synth_gate_clk", NULL);
+
+ clk = clk_register_mux(NULL, "gen2_3_parent_clk", gen2_3_parents,
+ ARRAY_SIZE(gen2_3_parents), 0, CORE_CLK_CFG,
+ GEN_SYNTH2_3_CLK_SHIFT, GEN_SYNTH2_3_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "gen2_3_parent_clk", NULL);
+
+ clk = clk_register_aux("gen2_synth_clk", "gen2_synth_gate_clk",
+ "gen2_3_parent_clk", 0, GEN2_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "gen2_synth_clk", NULL);
+ clk_register_clkdev(clk1, "gen2_synth_gate_clk", NULL);
+
+ clk = clk_register_aux("gen3_synth_clk", "gen3_synth_gate_clk",
+ "gen2_3_parent_clk", 0, GEN3_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "gen3_synth_clk", NULL);
+ clk_register_clkdev(clk1, "gen3_synth_gate_clk", NULL);
+
+ /* clock derived from pll3 clk */
+ clk = clk_register_gate(NULL, "usbh_clk", "pll3_48m_clk", 0,
+ PERIP1_CLK_ENB, USBH_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "usbh_clk", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "usbh.0_clk", "usbh_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, "usbh.0_clk", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "usbh.1_clk", "usbh_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, "usbh.1_clk", NULL);
+
+ clk = clk_register_gate(NULL, "usbd_clk", "pll3_48m_clk", 0,
+ PERIP1_CLK_ENB, USBD_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "designware_udc");
+
+ /* clock derived from ahb clk */
+ clk = clk_register_fixed_factor(NULL, "ahbmult2_clk", "ahb_clk", 0, 2,
+ 1);
+ clk_register_clkdev(clk, "ahbmult2_clk", NULL);
+
+ clk = clk_register_mux(NULL, "ddr_clk", ddr_parents,
+ ARRAY_SIZE(ddr_parents), 0, PLL_CLK_CFG, MCTR_CLK_SHIFT,
+ MCTR_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "ddr_clk", NULL);
+
+ clk = clk_register_divider(NULL, "apb_clk", "ahb_clk",
+ CLK_SET_RATE_PARENT, CORE_CLK_CFG, PCLK_RATIO_SHIFT,
+ PCLK_RATIO_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "apb_clk", NULL);
+
+ clk = clk_register_gate(NULL, "amem_clk", "ahb_clk", 0, AMEM_CLK_CFG,
+ AMEM_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "amem_clk", NULL);
+
+ clk = clk_register_gate(NULL, "c3_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ C3_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "c3_clk");
+
+ clk = clk_register_gate(NULL, "dma_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ DMA_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "fc400000.dma");
+
+ clk = clk_register_gate(NULL, "gmac_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ GMAC_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "e0800000.eth");
+
+ clk = clk_register_gate(NULL, "i2c0_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ I2C_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "d0180000.i2c");
+
+ clk = clk_register_gate(NULL, "jpeg_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ JPEG_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "jpeg");
+
+ clk = clk_register_gate(NULL, "smi_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ SMI_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "fc000000.flash");
+
+ /* clock derived from apb clk */
+ clk = clk_register_gate(NULL, "adc_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+ ADC_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "adc");
+
+ clk = clk_register_gate(NULL, "gpio0_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+ GPIO_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "fc980000.gpio");
+
+ clk = clk_register_gate(NULL, "ssp0_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+ SSP_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "d0100000.spi");
+
+ /* RAS clk enable */
+ clk = clk_register_gate(NULL, "ras_ahb_clk", "ahb_clk", 0, RAS_CLK_ENB,
+ RAS_AHB_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_ahb_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_apb_clk", "apb_clk", 0, RAS_CLK_ENB,
+ RAS_APB_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_apb_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_32k_clk", "osc_32k_clk", 0,
+ RAS_CLK_ENB, RAS_32K_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_32k_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_24m_clk", "osc_24m_clk", 0,
+ RAS_CLK_ENB, RAS_24M_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_24m_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_pll1_clk", "pll1_clk", 0,
+ RAS_CLK_ENB, RAS_PLL1_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_pll1_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_pll2_clk", "pll2_clk", 0,
+ RAS_CLK_ENB, RAS_PLL2_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_pll2_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_pll3_48m_clk", "pll3_48m_clk", 0,
+ RAS_CLK_ENB, RAS_48M_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_pll3_48m_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_gen0_synth_gate_clk",
+ "gen0_synth_gate_clk", 0, RAS_CLK_ENB,
+ RAS_SYNT0_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_gen0_synth_gate_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_gen1_synth_gate_clk",
+ "gen1_synth_gate_clk", 0, RAS_CLK_ENB,
+ RAS_SYNT1_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_gen1_synth_gate_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_gen2_synth_gate_clk",
+ "gen2_synth_gate_clk", 0, RAS_CLK_ENB,
+ RAS_SYNT2_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_gen2_synth_gate_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_gen3_synth_gate_clk",
+ "gen3_synth_gate_clk", 0, RAS_CLK_ENB,
+ RAS_SYNT3_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_gen3_synth_gate_clk", NULL);
+
+ if (of_machine_is_compatible("st,spear300"))
+ spear300_clk_init();
+ else if (of_machine_is_compatible("st,spear310"))
+ spear310_clk_init();
+ else if (of_machine_is_compatible("st,spear320"))
+ spear320_clk_init();
+}
diff --git a/drivers/clk/spear/spear6xx_clock.c b/drivers/clk/spear/spear6xx_clock.c
new file mode 100644
index 000000000000..f9a20b382304
--- /dev/null
+++ b/drivers/clk/spear/spear6xx_clock.c
@@ -0,0 +1,342 @@
+/*
+ * SPEAr6xx machines clock framework source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/spinlock_types.h>
+#include <mach/misc_regs.h>
+#include "clk.h"
+
+static DEFINE_SPINLOCK(_lock);
+
+#define PLL1_CTR (MISC_BASE + 0x008)
+#define PLL1_FRQ (MISC_BASE + 0x00C)
+#define PLL2_CTR (MISC_BASE + 0x014)
+#define PLL2_FRQ (MISC_BASE + 0x018)
+#define PLL_CLK_CFG (MISC_BASE + 0x020)
+ /* PLL_CLK_CFG register masks */
+ #define MCTR_CLK_SHIFT 28
+ #define MCTR_CLK_MASK 3
+
+#define CORE_CLK_CFG (MISC_BASE + 0x024)
+ /* CORE CLK CFG register masks */
+ #define HCLK_RATIO_SHIFT 10
+ #define HCLK_RATIO_MASK 2
+ #define PCLK_RATIO_SHIFT 8
+ #define PCLK_RATIO_MASK 2
+
+#define PERIP_CLK_CFG (MISC_BASE + 0x028)
+ /* PERIP_CLK_CFG register masks */
+ #define CLCD_CLK_SHIFT 2
+ #define CLCD_CLK_MASK 2
+ #define UART_CLK_SHIFT 4
+ #define UART_CLK_MASK 1
+ #define FIRDA_CLK_SHIFT 5
+ #define FIRDA_CLK_MASK 2
+ #define GPT0_CLK_SHIFT 8
+ #define GPT1_CLK_SHIFT 10
+ #define GPT2_CLK_SHIFT 11
+ #define GPT3_CLK_SHIFT 12
+ #define GPT_CLK_MASK 1
+
+#define PERIP1_CLK_ENB (MISC_BASE + 0x02C)
+ /* PERIP1_CLK_ENB register masks */
+ #define UART0_CLK_ENB 3
+ #define UART1_CLK_ENB 4
+ #define SSP0_CLK_ENB 5
+ #define SSP1_CLK_ENB 6
+ #define I2C_CLK_ENB 7
+ #define JPEG_CLK_ENB 8
+ #define FSMC_CLK_ENB 9
+ #define FIRDA_CLK_ENB 10
+ #define GPT2_CLK_ENB 11
+ #define GPT3_CLK_ENB 12
+ #define GPIO2_CLK_ENB 13
+ #define SSP2_CLK_ENB 14
+ #define ADC_CLK_ENB 15
+ #define GPT1_CLK_ENB 11
+ #define RTC_CLK_ENB 17
+ #define GPIO1_CLK_ENB 18
+ #define DMA_CLK_ENB 19
+ #define SMI_CLK_ENB 21
+ #define CLCD_CLK_ENB 22
+ #define GMAC_CLK_ENB 23
+ #define USBD_CLK_ENB 24
+ #define USBH0_CLK_ENB 25
+ #define USBH1_CLK_ENB 26
+
+#define PRSC0_CLK_CFG (MISC_BASE + 0x044)
+#define PRSC1_CLK_CFG (MISC_BASE + 0x048)
+#define PRSC2_CLK_CFG (MISC_BASE + 0x04C)
+
+#define CLCD_CLK_SYNT (MISC_BASE + 0x05C)
+#define FIRDA_CLK_SYNT (MISC_BASE + 0x060)
+#define UART_CLK_SYNT (MISC_BASE + 0x064)
+
+/* vco rate configuration table, in ascending order of rates */
+static struct pll_rate_tbl pll_rtbl[] = {
+ {.mode = 0, .m = 0x53, .n = 0x0F, .p = 0x1}, /* vco 332 & pll 166 MHz */
+ {.mode = 0, .m = 0x85, .n = 0x0F, .p = 0x1}, /* vco 532 & pll 266 MHz */
+ {.mode = 0, .m = 0xA6, .n = 0x0F, .p = 0x1}, /* vco 664 & pll 332 MHz */
+};
+
+/* aux rate configuration table, in ascending order of rates */
+static struct aux_rate_tbl aux_rtbl[] = {
+ /* For PLL1 = 332 MHz */
+ {.xscale = 2, .yscale = 8, .eq = 0}, /* 41.5 MHz */
+ {.xscale = 2, .yscale = 4, .eq = 0}, /* 83 MHz */
+ {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
+};
+
+static const char *clcd_parents[] = { "pll3_48m_clk", "clcd_synth_gate_clk", };
+static const char *firda_parents[] = { "pll3_48m_clk", "firda_synth_gate_clk",
+};
+static const char *uart_parents[] = { "pll3_48m_clk", "uart_synth_gate_clk", };
+static const char *gpt0_1_parents[] = { "pll3_48m_clk", "gpt0_1_synth_clk", };
+static const char *gpt2_parents[] = { "pll3_48m_clk", "gpt2_synth_clk", };
+static const char *gpt3_parents[] = { "pll3_48m_clk", "gpt3_synth_clk", };
+static const char *ddr_parents[] = { "ahb_clk", "ahbmult2_clk", "none",
+ "pll2_clk", };
+
+/* gpt rate configuration table, in ascending order of rates */
+static struct gpt_rate_tbl gpt_rtbl[] = {
+ /* For pll1 = 332 MHz */
+ {.mscale = 4, .nscale = 0}, /* 41.5 MHz */
+ {.mscale = 2, .nscale = 0}, /* 55.3 MHz */
+ {.mscale = 1, .nscale = 0}, /* 83 MHz */
+};
+
+void __init spear6xx_clk_init(void)
+{
+ struct clk *clk, *clk1;
+
+ clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
+ clk_register_clkdev(clk, "apb_pclk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT,
+ 32000);
+ clk_register_clkdev(clk, "osc_32k_clk", NULL);
+
+ clk = clk_register_fixed_rate(NULL, "osc_30m_clk", NULL, CLK_IS_ROOT,
+ 30000000);
+ clk_register_clkdev(clk, "osc_30m_clk", NULL);
+
+ /* clock derived from 32 KHz osc clk */
+ clk = clk_register_gate(NULL, "rtc_spear", "osc_32k_clk", 0,
+ PERIP1_CLK_ENB, RTC_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "rtc-spear");
+
+ /* clock derived from 30 MHz osc clk */
+ clk = clk_register_fixed_rate(NULL, "pll3_48m_clk", "osc_24m_clk", 0,
+ 48000000);
+ clk_register_clkdev(clk, "pll3_48m_clk", NULL);
+
+ clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "osc_30m_clk",
+ 0, PLL1_CTR, PLL1_FRQ, pll_rtbl, ARRAY_SIZE(pll_rtbl),
+ &_lock, &clk1, NULL);
+ clk_register_clkdev(clk, "vco1_clk", NULL);
+ clk_register_clkdev(clk1, "pll1_clk", NULL);
+
+ clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL,
+ "osc_30m_clk", 0, PLL2_CTR, PLL2_FRQ, pll_rtbl,
+ ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
+ clk_register_clkdev(clk, "vco2_clk", NULL);
+ clk_register_clkdev(clk1, "pll2_clk", NULL);
+
+ clk = clk_register_fixed_factor(NULL, "wdt_clk", "osc_30m_clk", 0, 1,
+ 1);
+ clk_register_clkdev(clk, NULL, "wdt");
+
+ /* clock derived from pll1 clk */
+ clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk", 0, 1, 1);
+ clk_register_clkdev(clk, "cpu_clk", NULL);
+
+ clk = clk_register_divider(NULL, "ahb_clk", "pll1_clk",
+ CLK_SET_RATE_PARENT, CORE_CLK_CFG, HCLK_RATIO_SHIFT,
+ HCLK_RATIO_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "ahb_clk", NULL);
+
+ clk = clk_register_aux("uart_synth_clk", "uart_synth_gate_clk",
+ "pll1_clk", 0, UART_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "uart_synth_clk", NULL);
+ clk_register_clkdev(clk1, "uart_synth_gate_clk", NULL);
+
+ clk = clk_register_mux(NULL, "uart_mux_clk", uart_parents,
+ ARRAY_SIZE(uart_parents), 0, PERIP_CLK_CFG,
+ UART_CLK_SHIFT, UART_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "uart_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "uart0", "uart_mux_clk", 0,
+ PERIP1_CLK_ENB, UART0_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "d0000000.serial");
+
+ clk = clk_register_gate(NULL, "uart1", "uart_mux_clk", 0,
+ PERIP1_CLK_ENB, UART1_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "d0080000.serial");
+
+ clk = clk_register_aux("firda_synth_clk", "firda_synth_gate_clk",
+ "pll1_clk", 0, FIRDA_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "firda_synth_clk", NULL);
+ clk_register_clkdev(clk1, "firda_synth_gate_clk", NULL);
+
+ clk = clk_register_mux(NULL, "firda_mux_clk", firda_parents,
+ ARRAY_SIZE(firda_parents), 0, PERIP_CLK_CFG,
+ FIRDA_CLK_SHIFT, FIRDA_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "firda_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "firda_clk", "firda_mux_clk", 0,
+ PERIP1_CLK_ENB, FIRDA_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "firda");
+
+ clk = clk_register_aux("clcd_synth_clk", "clcd_synth_gate_clk",
+ "pll1_clk", 0, CLCD_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "clcd_synth_clk", NULL);
+ clk_register_clkdev(clk1, "clcd_synth_gate_clk", NULL);
+
+ clk = clk_register_mux(NULL, "clcd_mux_clk", clcd_parents,
+ ARRAY_SIZE(clcd_parents), 0, PERIP_CLK_CFG,
+ CLCD_CLK_SHIFT, CLCD_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "clcd_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "clcd_clk", "clcd_mux_clk", 0,
+ PERIP1_CLK_ENB, CLCD_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "clcd");
+
+ /* gpt clocks */
+ clk = clk_register_gpt("gpt0_1_synth_clk", "pll1_clk", 0, PRSC0_CLK_CFG,
+ gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
+ clk_register_clkdev(clk, "gpt0_1_synth_clk", NULL);
+
+ clk = clk_register_mux(NULL, "gpt0_mux_clk", gpt0_1_parents,
+ ARRAY_SIZE(gpt0_1_parents), 0, PERIP_CLK_CFG,
+ GPT0_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "gpt0");
+
+ clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt0_1_parents,
+ ARRAY_SIZE(gpt0_1_parents), 0, PERIP_CLK_CFG,
+ GPT1_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "gpt1_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0,
+ PERIP1_CLK_ENB, GPT1_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "gpt1");
+
+ clk = clk_register_gpt("gpt2_synth_clk", "pll1_clk", 0, PRSC1_CLK_CFG,
+ gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
+ clk_register_clkdev(clk, "gpt2_synth_clk", NULL);
+
+ clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt2_parents,
+ ARRAY_SIZE(gpt2_parents), 0, PERIP_CLK_CFG,
+ GPT2_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "gpt2_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0,
+ PERIP1_CLK_ENB, GPT2_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "gpt2");
+
+ clk = clk_register_gpt("gpt3_synth_clk", "pll1_clk", 0, PRSC2_CLK_CFG,
+ gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
+ clk_register_clkdev(clk, "gpt3_synth_clk", NULL);
+
+ clk = clk_register_mux(NULL, "gpt3_mux_clk", gpt3_parents,
+ ARRAY_SIZE(gpt3_parents), 0, PERIP_CLK_CFG,
+ GPT3_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "gpt3_mux_clk", NULL);
+
+ clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mux_clk", 0,
+ PERIP1_CLK_ENB, GPT3_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "gpt3");
+
+ /* clock derived from pll3 clk */
+ clk = clk_register_gate(NULL, "usbh0_clk", "pll3_48m_clk", 0,
+ PERIP1_CLK_ENB, USBH0_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "usbh.0_clk");
+
+ clk = clk_register_gate(NULL, "usbh1_clk", "pll3_48m_clk", 0,
+ PERIP1_CLK_ENB, USBH1_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "usbh.1_clk");
+
+ clk = clk_register_gate(NULL, "usbd_clk", "pll3_48m_clk", 0,
+ PERIP1_CLK_ENB, USBD_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "designware_udc");
+
+ /* clock derived from ahb clk */
+ clk = clk_register_fixed_factor(NULL, "ahbmult2_clk", "ahb_clk", 0, 2,
+ 1);
+ clk_register_clkdev(clk, "ahbmult2_clk", NULL);
+
+ clk = clk_register_mux(NULL, "ddr_clk", ddr_parents,
+ ARRAY_SIZE(ddr_parents),
+ 0, PLL_CLK_CFG, MCTR_CLK_SHIFT, MCTR_CLK_MASK, 0,
+ &_lock);
+ clk_register_clkdev(clk, "ddr_clk", NULL);
+
+ clk = clk_register_divider(NULL, "apb_clk", "ahb_clk",
+ CLK_SET_RATE_PARENT, CORE_CLK_CFG, PCLK_RATIO_SHIFT,
+ PCLK_RATIO_MASK, 0, &_lock);
+ clk_register_clkdev(clk, "apb_clk", NULL);
+
+ clk = clk_register_gate(NULL, "dma_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ DMA_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "fc400000.dma");
+
+ clk = clk_register_gate(NULL, "fsmc_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ FSMC_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "d1800000.flash");
+
+ clk = clk_register_gate(NULL, "gmac_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ GMAC_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "gmac");
+
+ clk = clk_register_gate(NULL, "i2c_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ I2C_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "d0200000.i2c");
+
+ clk = clk_register_gate(NULL, "jpeg_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ JPEG_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "jpeg");
+
+ clk = clk_register_gate(NULL, "smi_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
+ SMI_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "fc000000.flash");
+
+ /* clock derived from apb clk */
+ clk = clk_register_gate(NULL, "adc_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+ ADC_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "adc");
+
+ clk = clk_register_fixed_factor(NULL, "gpio0_clk", "apb_clk", 0, 1, 1);
+ clk_register_clkdev(clk, NULL, "f0100000.gpio");
+
+ clk = clk_register_gate(NULL, "gpio1_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+ GPIO1_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "fc980000.gpio");
+
+ clk = clk_register_gate(NULL, "gpio2_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+ GPIO2_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "d8100000.gpio");
+
+ clk = clk_register_gate(NULL, "ssp0_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+ SSP0_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "ssp-pl022.0");
+
+ clk = clk_register_gate(NULL, "ssp1_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+ SSP1_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "ssp-pl022.1");
+
+ clk = clk_register_gate(NULL, "ssp2_clk", "apb_clk", 0, PERIP1_CLK_ENB,
+ SSP2_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, NULL, "ssp-pl022.2");
+}