summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/arm/picoxcell.txt24
-rw-r--r--arch/arm/Kconfig18
-rw-r--r--arch/arm/Makefile1
-rw-r--r--arch/arm/boot/dts/picoxcell-pc3x2.dtsi249
-rw-r--r--arch/arm/boot/dts/picoxcell-pc3x3.dtsi365
-rw-r--r--arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts86
-rw-r--r--arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts92
-rw-r--r--arch/arm/mach-picoxcell/Makefile3
-rw-r--r--arch/arm/mach-picoxcell/Makefile.boot1
-rw-r--r--arch/arm/mach-picoxcell/common.c55
-rw-r--r--arch/arm/mach-picoxcell/common.h18
-rw-r--r--arch/arm/mach-picoxcell/include/mach/debug-macro.S35
-rw-r--r--arch/arm/mach-picoxcell/include/mach/entry-macro.S19
-rw-r--r--arch/arm/mach-picoxcell/include/mach/gpio.h1
-rw-r--r--arch/arm/mach-picoxcell/include/mach/hardware.h21
-rw-r--r--arch/arm/mach-picoxcell/include/mach/io.h22
-rw-r--r--arch/arm/mach-picoxcell/include/mach/irqs.h25
-rw-r--r--arch/arm/mach-picoxcell/include/mach/map.h25
-rw-r--r--arch/arm/mach-picoxcell/include/mach/memory.h1
-rw-r--r--arch/arm/mach-picoxcell/include/mach/picoxcell_soc.h25
-rw-r--r--arch/arm/mach-picoxcell/include/mach/system.h31
-rw-r--r--arch/arm/mach-picoxcell/include/mach/timex.h25
-rw-r--r--arch/arm/mach-picoxcell/include/mach/uncompress.h21
-rw-r--r--arch/arm/mach-picoxcell/include/mach/vmalloc.h14
-rw-r--r--arch/arm/mach-picoxcell/io.c32
-rw-r--r--arch/arm/mach-picoxcell/time.c132
26 files changed, 1341 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/arm/picoxcell.txt b/Documentation/devicetree/bindings/arm/picoxcell.txt
new file mode 100644
index 000000000000..e75c0ef51e69
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/picoxcell.txt
@@ -0,0 +1,24 @@
+Picochip picoXcell device tree bindings.
+========================================
+
+Required root node properties:
+ - compatible:
+ - "picochip,pc7302-pc3x3" : PC7302 development board with PC3X3 device.
+ - "picochip,pc7302-pc3x2" : PC7302 development board with PC3X2 device.
+ - "picochip,pc3x3" : picoXcell PC3X3 device based board.
+ - "picochip,pc3x2" : picoXcell PC3X2 device based board.
+
+Timers required properties:
+ - compatible = "picochip,pc3x2-timer"
+ - interrupts : The single IRQ line for the timer.
+ - clock-freq : The frequency in HZ of the timer.
+ - reg : The register bank for the timer.
+
+Note: two timers are required - one for the scheduler clock and one for the
+event tick/NOHZ.
+
+VIC required properties:
+ - compatible = "arm,pl192-vic".
+ - interrupt-controller.
+ - reg : The register bank for the device.
+ - #interrupt-cells : Must be 1.
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6147d30a832c..4fe1db171464 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -643,6 +643,24 @@ config ARCH_TEGRA
This enables support for NVIDIA Tegra based systems (Tegra APX,
Tegra 6xx and Tegra 2 series).
+config ARCH_PICOXCELL
+ bool "Picochip picoXcell"
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_PATCH_PHYS_VIRT
+ select ARM_VIC
+ select CPU_V6K
+ select DW_APB_TIMER
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_GPIO
+ select HAVE_SCHED_CLOCK
+ select HAVE_TCM
+ select NO_IOPORT
+ select USE_OF
+ help
+ This enables support for systems based on the Picochip picoXcell
+ family of Femtocell devices. The picoxcell support requires device tree
+ for all boards.
+
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
select CPU_ARM926T
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index e8688114ca95..e775f93844a7 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -169,6 +169,7 @@ machine-$(CONFIG_ARCH_OMAP2) := omap2
machine-$(CONFIG_ARCH_OMAP3) := omap2
machine-$(CONFIG_ARCH_OMAP4) := omap2
machine-$(CONFIG_ARCH_ORION5X) := orion5x
+machine-$(CONFIG_ARCH_PICOXCELL) := picoxcell
machine-$(CONFIG_ARCH_PNX4008) := pnx4008
machine-$(CONFIG_ARCH_PRIMA2) := prima2
machine-$(CONFIG_ARCH_PXA) := pxa
diff --git a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
new file mode 100644
index 000000000000..f0a8c2068ea7
--- /dev/null
+++ b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
@@ -0,0 +1,249 @@
+/*
+ * Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+/include/ "skeleton.dtsi"
+/ {
+ model = "Picochip picoXcell PC3X2";
+ compatible = "picochip,pc3x2";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,1176jz-s";
+ clock-frequency = <400000000>;
+ reg = <0>;
+ d-cache-line-size = <32>;
+ d-cache-size = <32768>;
+ i-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ };
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pclk: clock@0 {
+ compatible = "fixed-clock";
+ clock-outputs = "bus", "pclk";
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+ };
+
+ paxi {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x80000000 0x400000>;
+
+ emac: gem@30000 {
+ compatible = "cadence,gem";
+ reg = <0x30000 0x10000>;
+ interrupts = <31>;
+ };
+
+ dmac1: dmac@40000 {
+ compatible = "snps,dw-dmac";
+ reg = <0x40000 0x10000>;
+ interrupts = <25>;
+ };
+
+ dmac2: dmac@50000 {
+ compatible = "snps,dw-dmac";
+ reg = <0x50000 0x10000>;
+ interrupts = <26>;
+ };
+
+ vic0: interrupt-controller@60000 {
+ compatible = "arm,pl192-vic";
+ interrupt-controller;
+ reg = <0x60000 0x1000>;
+ #interrupt-cells = <1>;
+ };
+
+ vic1: interrupt-controller@64000 {
+ compatible = "arm,pl192-vic";
+ interrupt-controller;
+ reg = <0x64000 0x1000>;
+ #interrupt-cells = <1>;
+ };
+
+ fuse: picoxcell-fuse@80000 {
+ compatible = "picoxcell,fuse-pc3x2";
+ reg = <0x80000 0x10000>;
+ };
+
+ ssi: picoxcell-spi@90000 {
+ compatible = "picoxcell,spi";
+ reg = <0x90000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <10>;
+ };
+
+ ipsec: spacc@100000 {
+ compatible = "picochip,spacc-ipsec";
+ reg = <0x100000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <24>;
+ ref-clock = <&pclk>, "ref";
+ };
+
+ srtp: spacc@140000 {
+ compatible = "picochip,spacc-srtp";
+ reg = <0x140000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <23>;
+ };
+
+ l2_engine: spacc@180000 {
+ compatible = "picochip,spacc-l2";
+ reg = <0x180000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <22>;
+ ref-clock = <&pclk>, "ref";
+ };
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x200000 0x80000>;
+
+ rtc0: rtc@00000 {
+ compatible = "picochip,pc3x2-rtc";
+ clock-freq = <200000000>;
+ reg = <0x00000 0xf>;
+ interrupt-parent = <&vic1>;
+ interrupts = <8>;
+ };
+
+ timer0: timer@10000 {
+ compatible = "picochip,pc3x2-timer";
+ interrupt-parent = <&vic0>;
+ interrupts = <4>;
+ clock-freq = <200000000>;
+ reg = <0x10000 0x14>;
+ };
+
+ timer1: timer@10014 {
+ compatible = "picochip,pc3x2-timer";
+ interrupt-parent = <&vic0>;
+ interrupts = <5>;
+ clock-freq = <200000000>;
+ reg = <0x10014 0x14>;
+ };
+
+ timer2: timer@10028 {
+ compatible = "picochip,pc3x2-timer";
+ interrupt-parent = <&vic0>;
+ interrupts = <6>;
+ clock-freq = <200000000>;
+ reg = <0x10028 0x14>;
+ };
+
+ timer3: timer@1003c {
+ compatible = "picochip,pc3x2-timer";
+ interrupt-parent = <&vic0>;
+ interrupts = <7>;
+ clock-freq = <200000000>;
+ reg = <0x1003c 0x14>;
+ };
+
+ gpio: gpio@20000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x20000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg-io-width = <4>;
+
+ banka: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-bank";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-generic,nr-gpio = <8>;
+
+ regoffset-dat = <0x50>;
+ regoffset-set = <0x00>;
+ regoffset-dirout = <0x04>;
+ };
+
+ bankb: gpio-controller@1 {
+ compatible = "snps,dw-apb-gpio-bank";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-generic,nr-gpio = <8>;
+
+ regoffset-dat = <0x54>;
+ regoffset-set = <0x0c>;
+ regoffset-dirout = <0x10>;
+ };
+ };
+
+ uart0: uart@30000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x30000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <10>;
+ clock-frequency = <3686400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+
+ uart1: uart@40000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x40000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <9>;
+ clock-frequency = <3686400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+
+ wdog: watchdog@50000 {
+ compatible = "snps,dw-apb-wdg";
+ reg = <0x50000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <11>;
+ bus-clock = <&pclk>, "bus";
+ };
+ };
+ };
+
+ rwid-axi {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges;
+
+ ebi@50000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x40000000 0x08000000
+ 1 0 0x48000000 0x08000000
+ 2 0 0x50000000 0x08000000
+ 3 0 0x58000000 0x08000000>;
+ };
+
+ axi2pico@c0000000 {
+ compatible = "picochip,axi2pico-pc3x2";
+ reg = <0xc0000000 0x10000>;
+ interrupts = <13 14 15 16 17 18 19 20 21>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/picoxcell-pc3x3.dtsi b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi
new file mode 100644
index 000000000000..daa962d191e6
--- /dev/null
+++ b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi
@@ -0,0 +1,365 @@
+/*
+ * Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+/include/ "skeleton.dtsi"
+/ {
+ model = "Picochip picoXcell PC3X3";
+ compatible = "picochip,pc3x3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,1176jz-s";
+ cpu-clock = <&arm_clk>, "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ d-cache-size = <32768>;
+ i-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ };
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clkgate: clkgate@800a0048 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x800a0048 4>;
+ compatible = "picochip,pc3x3-clk-gate";
+
+ tzprot_clk: clock@0 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <0>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ spi_clk: clock@1 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <1>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ dmac0_clk: clock@2 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <2>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ dmac1_clk: clock@3 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <3>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ ebi_clk: clock@4 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <4>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ ipsec_clk: clock@5 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <5>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ l2_clk: clock@6 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <6>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ trng_clk: clock@7 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <7>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ fuse_clk: clock@8 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <8>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ otp_clk: clock@9 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <9>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+ };
+
+ arm_clk: clock@11 {
+ compatible = "picochip,pc3x3-pll";
+ reg = <0x800a0050 0x8>;
+ picochip,min-freq = <140000000>;
+ picochip,max-freq = <700000000>;
+ ref-clock = <&ref_clk>, "ref";
+ clock-outputs = "cpu";
+ };
+
+ pclk: clock@12 {
+ compatible = "fixed-clock";
+ clock-outputs = "bus", "pclk";
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+ };
+
+ paxi {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x80000000 0x400000>;
+
+ emac: gem@30000 {
+ compatible = "cadence,gem";
+ reg = <0x30000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <31>;
+ };
+
+ dmac1: dmac@40000 {
+ compatible = "snps,dw-dmac";
+ reg = <0x40000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <25>;
+ };
+
+ dmac2: dmac@50000 {
+ compatible = "snps,dw-dmac";
+ reg = <0x50000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <26>;
+ };
+
+ vic0: interrupt-controller@60000 {
+ compatible = "arm,pl192-vic";
+ interrupt-controller;
+ reg = <0x60000 0x1000>;
+ #interrupt-cells = <1>;
+ };
+
+ vic1: interrupt-controller@64000 {
+ compatible = "arm,pl192-vic";
+ interrupt-controller;
+ reg = <0x64000 0x1000>;
+ #interrupt-cells = <1>;
+ };
+
+ fuse: picoxcell-fuse@80000 {
+ compatible = "picoxcell,fuse-pc3x3";
+ reg = <0x80000 0x10000>;
+ };
+
+ ssi: picoxcell-spi@90000 {
+ compatible = "picoxcell,spi";
+ reg = <0x90000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <10>;
+ };
+
+ ipsec: spacc@100000 {
+ compatible = "picochip,spacc-ipsec";
+ reg = <0x100000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <24>;
+ ref-clock = <&ipsec_clk>, "ref";
+ };
+
+ srtp: spacc@140000 {
+ compatible = "picochip,spacc-srtp";
+ reg = <0x140000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <23>;
+ };
+
+ l2_engine: spacc@180000 {
+ compatible = "picochip,spacc-l2";
+ reg = <0x180000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <22>;
+ ref-clock = <&l2_clk>, "ref";
+ };
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x200000 0x80000>;
+
+ rtc0: rtc@00000 {
+ compatible = "picochip,pc3x2-rtc";
+ clock-freq = <200000000>;
+ reg = <0x00000 0xf>;
+ interrupt-parent = <&vic0>;
+ interrupts = <8>;
+ };
+
+ timer0: timer@10000 {
+ compatible = "picochip,pc3x2-timer";
+ interrupt-parent = <&vic0>;
+ interrupts = <4>;
+ clock-freq = <200000000>;
+ reg = <0x10000 0x14>;
+ };
+
+ timer1: timer@10014 {
+ compatible = "picochip,pc3x2-timer";
+ interrupt-parent = <&vic0>;
+ interrupts = <5>;
+ clock-freq = <200000000>;
+ reg = <0x10014 0x14>;
+ };
+
+ gpio: gpio@20000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x20000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg-io-width = <4>;
+
+ banka: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-bank";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-generic,nr-gpio = <8>;
+
+ regoffset-dat = <0x50>;
+ regoffset-set = <0x00>;
+ regoffset-dirout = <0x04>;
+ };
+
+ bankb: gpio-controller@1 {
+ compatible = "snps,dw-apb-gpio-bank";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-generic,nr-gpio = <16>;
+
+ regoffset-dat = <0x54>;
+ regoffset-set = <0x0c>;
+ regoffset-dirout = <0x10>;
+ };
+
+ bankd: gpio-controller@2 {
+ compatible = "snps,dw-apb-gpio-bank";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-generic,nr-gpio = <30>;
+
+ regoffset-dat = <0x5c>;
+ regoffset-set = <0x24>;
+ regoffset-dirout = <0x28>;
+ };
+ };
+
+ uart0: uart@30000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x30000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <10>;
+ clock-frequency = <3686400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+
+ uart1: uart@40000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x40000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <9>;
+ clock-frequency = <3686400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+
+ wdog: watchdog@50000 {
+ compatible = "snps,dw-apb-wdg";
+ reg = <0x50000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <11>;
+ bus-clock = <&pclk>, "bus";
+ };
+
+ timer2: timer@60000 {
+ compatible = "picochip,pc3x2-timer";
+ interrupt-parent = <&vic0>;
+ interrupts = <6>;
+ clock-freq = <200000000>;
+ reg = <0x60000 0x14>;
+ };
+
+ timer3: timer@60014 {
+ compatible = "picochip,pc3x2-timer";
+ interrupt-parent = <&vic0>;
+ interrupts = <7>;
+ clock-freq = <200000000>;
+ reg = <0x60014 0x14>;
+ };
+ };
+ };
+
+ rwid-axi {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges;
+
+ ebi@50000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x40000000 0x08000000
+ 1 0 0x48000000 0x08000000
+ 2 0 0x50000000 0x08000000
+ 3 0 0x58000000 0x08000000>;
+ };
+
+ axi2pico@c0000000 {
+ compatible = "picochip,axi2pico-pc3x3";
+ reg = <0xc0000000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <13 14 15 16 17 18 19 20 21>;
+ };
+
+ otp@ffff8000 {
+ compatible = "picochip,otp-pc3x3";
+ reg = <0xffff8000 0x8000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts b/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts
new file mode 100644
index 000000000000..1297414dd649
--- /dev/null
+++ b/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts
@@ -0,0 +1,86 @@
+/*
+ * Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+/include/ "picoxcell-pc3x2.dtsi"
+/ {
+ model = "Picochip PC7302 (PC3X2)";
+ compatible = "picochip,pc7302-pc3x2", "picochip,pc3x2";
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+
+ chosen {
+ linux,stdout-path = &uart0;
+ };
+
+ clocks {
+ ref_clk: clock@1 {
+ compatible = "fixed-clock";
+ clock-outputs = "ref";
+ clock-frequency = <20000000>;
+ };
+ };
+
+ rwid-axi {
+ ebi@50000000 {
+ nand: gpio-nand@2,0 {
+ compatible = "gpio-control-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <2 0x0000 0x1000>;
+ bus-clock = <&pclk>, "bus";
+ gpio-control-nand,io-sync-reg =
+ <0x00000000 0x80220000>;
+
+ gpios = <&banka 1 0 /* rdy */
+ &banka 2 0 /* nce */
+ &banka 3 0 /* ale */
+ &banka 4 0 /* cle */
+ 0 /* nwp */>;
+
+ boot@100000 {
+ label = "Boot";
+ reg = <0x100000 0x80000>;
+ };
+
+ redundant-boot@200000 {
+ label = "Redundant Boot";
+ reg = <0x200000 0x80000>;
+ };
+
+ boot-env@300000 {
+ label = "Boot Evironment";
+ reg = <0x300000 0x20000>;
+ };
+
+ redundant-boot-env@320000 {
+ label = "Redundant Boot Environment";
+ reg = <0x300000 0x20000>;
+ };
+
+ kernel@380000 {
+ label = "Kernel";
+ reg = <0x380000 0x800000>;
+ };
+
+ fs@b80000 {
+ label = "File System";
+ reg = <0xb80000 0xf480000>;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts b/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts
new file mode 100644
index 000000000000..9e317a4f431c
--- /dev/null
+++ b/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts
@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+/include/ "picoxcell-pc3x3.dtsi"
+/ {
+ model = "Picochip PC7302 (PC3X3)";
+ compatible = "picochip,pc7302-pc3x3", "picochip,pc3x3";
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+
+ chosen {
+ linux,stdout-path = &uart0;
+ };
+
+ clocks {
+ ref_clk: clock@10 {
+ compatible = "fixed-clock";
+ clock-outputs = "ref";
+ clock-frequency = <20000000>;
+ };
+
+ clkgate: clkgate@800a0048 {
+ clock@4 {
+ picochip,clk-no-disable;
+ };
+ };
+ };
+
+ rwid-axi {
+ ebi@50000000 {
+ nand: gpio-nand@2,0 {
+ compatible = "gpio-control-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <2 0x0000 0x1000>;
+ bus-clock = <&ebi_clk>, "bus";
+ gpio-control-nand,io-sync-reg =
+ <0x00000000 0x80220000>;
+
+ gpios = <&banka 1 0 /* rdy */
+ &banka 2 0 /* nce */
+ &banka 3 0 /* ale */
+ &banka 4 0 /* cle */
+ 0 /* nwp */>;
+
+ boot@100000 {
+ label = "Boot";
+ reg = <0x100000 0x80000>;
+ };
+
+ redundant-boot@200000 {
+ label = "Redundant Boot";
+ reg = <0x200000 0x80000>;
+ };
+
+ boot-env@300000 {
+ label = "Boot Evironment";
+ reg = <0x300000 0x20000>;
+ };
+
+ redundant-boot-env@320000 {
+ label = "Redundant Boot Environment";
+ reg = <0x300000 0x20000>;
+ };
+
+ kernel@380000 {
+ label = "Kernel";
+ reg = <0x380000 0x800000>;
+ };
+
+ fs@b80000 {
+ label = "File System";
+ reg = <0xb80000 0xf480000>;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/mach-picoxcell/Makefile b/arch/arm/mach-picoxcell/Makefile
new file mode 100644
index 000000000000..c550b6363488
--- /dev/null
+++ b/arch/arm/mach-picoxcell/Makefile
@@ -0,0 +1,3 @@
+obj-y := common.o
+obj-y += time.o
+obj-y += io.o
diff --git a/arch/arm/mach-picoxcell/Makefile.boot b/arch/arm/mach-picoxcell/Makefile.boot
new file mode 100644
index 000000000000..b3271754e9fd
--- /dev/null
+++ b/arch/arm/mach-picoxcell/Makefile.boot
@@ -0,0 +1 @@
+zreladdr-y := 0x00008000
diff --git a/arch/arm/mach-picoxcell/common.c b/arch/arm/mach-picoxcell/common.c
new file mode 100644
index 000000000000..34d08347be5f
--- /dev/null
+++ b/arch/arm/mach-picoxcell/common.c
@@ -0,0 +1,55 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * All enquiries to support@picochip.com
+ */
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+#include <asm/hardware/vic.h>
+
+#include <mach/map.h>
+#include <mach/picoxcell_soc.h>
+
+#include "common.h"
+
+static void __init picoxcell_init_machine(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *picoxcell_dt_match[] = {
+ "picochip,pc3x2",
+ "picochip,pc3x3",
+ NULL
+};
+
+static const struct of_device_id vic_of_match[] __initconst = {
+ { .compatible = "arm,pl192-vic" },
+ { /* Sentinel */ }
+};
+
+static void __init picoxcell_init_irq(void)
+{
+ vic_init(IO_ADDRESS(PICOXCELL_VIC0_BASE), 0, ~0, 0);
+ vic_init(IO_ADDRESS(PICOXCELL_VIC1_BASE), 32, ~0, 0);
+ irq_domain_generate_simple(vic_of_match, PICOXCELL_VIC0_BASE, 0);
+ irq_domain_generate_simple(vic_of_match, PICOXCELL_VIC1_BASE, 32);
+}
+
+DT_MACHINE_START(PICOXCELL, "Picochip picoXcell")
+ .map_io = picoxcell_map_io,
+ .nr_irqs = ARCH_NR_IRQS,
+ .init_irq = picoxcell_init_irq,
+ .timer = &picoxcell_timer,
+ .init_machine = picoxcell_init_machine,
+ .dt_compat = picoxcell_dt_match,
+MACHINE_END
diff --git a/arch/arm/mach-picoxcell/common.h b/arch/arm/mach-picoxcell/common.h
new file mode 100644
index 000000000000..5263f0fa095c
--- /dev/null
+++ b/arch/arm/mach-picoxcell/common.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * All enquiries to support@picochip.com
+ */
+#ifndef __PICOXCELL_COMMON_H__
+#define __PICOXCELL_COMMON_H__
+
+#include <asm/mach/time.h>
+
+extern struct sys_timer picoxcell_timer;
+extern void picoxcell_map_io(void);
+
+#endif /* __PICOXCELL_COMMON_H__ */
diff --git a/arch/arm/mach-picoxcell/include/mach/debug-macro.S b/arch/arm/mach-picoxcell/include/mach/debug-macro.S
new file mode 100644
index 000000000000..8f2c234ed9d9
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/debug-macro.S
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit
+ * accesses to the 8250.
+ */
+#include <linux/serial_reg.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#define UART_SHIFT 2
+
+ .macro addruart, rp, rv
+ ldr \rv, =PHYS_TO_IO(PICOXCELL_UART1_BASE)
+ ldr \rp, =PICOXCELL_UART1_BASE
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #UART_TX << UART_SHIFT]
+ .endm
+
+ .macro busyuart,rd,rx
+1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT]
+ and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ teq \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ bne 1002b
+ .endm
+
+ /* The UART's don't have any flow control IO's wired up. */
+ .macro waituart,rd,rx
+ .endm
diff --git a/arch/arm/mach-picoxcell/include/mach/entry-macro.S b/arch/arm/mach-picoxcell/include/mach/entry-macro.S
new file mode 100644
index 000000000000..a6b09f75d9df
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/entry-macro.S
@@ -0,0 +1,19 @@
+/*
+ * entry-macro.S
+ *
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * Low-level IRQ helper macros for picoXcell platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#define VA_VIC0 IO_ADDRESS(PICOXCELL_VIC0_BASE)
+#define VA_VIC1 IO_ADDRESS(PICOXCELL_VIC1_BASE)
+
+#include <asm/entry-macro-vic2.S>
diff --git a/arch/arm/mach-picoxcell/include/mach/gpio.h b/arch/arm/mach-picoxcell/include/mach/gpio.h
new file mode 100644
index 000000000000..40a8c178f10d
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/gpio.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/arm/mach-picoxcell/include/mach/hardware.h b/arch/arm/mach-picoxcell/include/mach/hardware.h
new file mode 100644
index 000000000000..70ff58192ec9
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/hardware.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This file contains the hardware definitions of the picoXcell SoC devices.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <mach/picoxcell_soc.h>
+
+#endif
diff --git a/arch/arm/mach-picoxcell/include/mach/io.h b/arch/arm/mach-picoxcell/include/mach/io.h
new file mode 100644
index 000000000000..7573ec7d10a3
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/io.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+/* No ioports, but needed for driver compatibility. */
+#define __io(a) __typesafe_io(a)
+/* No PCI possible on picoxcell. */
+#define __mem_pci(a) (a)
+
+#endif /* __ASM_ARM_ARCH_IO_H */
diff --git a/arch/arm/mach-picoxcell/include/mach/irqs.h b/arch/arm/mach-picoxcell/include/mach/irqs.h
new file mode 100644
index 000000000000..4d13ed970919
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/irqs.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This file contains the hardware definitions of the picoXcell SoC devices.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+
+#define ARCH_NR_IRQS 64
+#define NR_IRQS (128 + ARCH_NR_IRQS)
+
+#define IRQ_VIC0_BASE 0
+#define IRQ_VIC1_BASE 32
+
+#endif /* __MACH_IRQS_H */
diff --git a/arch/arm/mach-picoxcell/include/mach/map.h b/arch/arm/mach-picoxcell/include/mach/map.h
new file mode 100644
index 000000000000..c06afad218bb
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/map.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __PICOXCELL_MAP_H__
+#define __PICOXCELL_MAP_H__
+
+#define PHYS_TO_IO(x) (((x) & 0x00ffffff) | 0xfe000000)
+
+#ifdef __ASSEMBLY__
+#define IO_ADDRESS(x) PHYS_TO_IO((x))
+#else
+#define IO_ADDRESS(x) (void __iomem __force *)(PHYS_TO_IO((x)))
+#endif
+
+#endif /* __PICOXCELL_MAP_H__ */
diff --git a/arch/arm/mach-picoxcell/include/mach/memory.h b/arch/arm/mach-picoxcell/include/mach/memory.h
new file mode 100644
index 000000000000..40a8c178f10d
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/memory.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/arm/mach-picoxcell/include/mach/picoxcell_soc.h b/arch/arm/mach-picoxcell/include/mach/picoxcell_soc.h
new file mode 100644
index 000000000000..5566fc88ddbc
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/picoxcell_soc.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This file contains the hardware definitions of the picoXcell SoC devices.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __PICOXCELL_SOC_H__
+#define __PICOXCELL_SOC_H__
+
+#define PICOXCELL_UART1_BASE 0x80230000
+#define PICOXCELL_PERIPH_BASE 0x80000000
+#define PICOXCELL_PERIPH_LENGTH SZ_4M
+#define PICOXCELL_VIC0_BASE 0x80060000
+#define PICOXCELL_VIC1_BASE 0x80064000
+
+#endif /* __PICOXCELL_SOC_H__ */
diff --git a/arch/arm/mach-picoxcell/include/mach/system.h b/arch/arm/mach-picoxcell/include/mach/system.h
new file mode 100644
index 000000000000..67c589b0c1bc
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/system.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+ /*
+ * This should do all the clock switching and wait for interrupt
+ * tricks.
+ */
+ cpu_do_idle();
+}
+
+static inline void arch_reset(int mode, const char *cmd)
+{
+ /* Watchdog reset to go here. */
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-picoxcell/include/mach/timex.h b/arch/arm/mach-picoxcell/include/mach/timex.h
new file mode 100644
index 000000000000..6c540a69f405
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/timex.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __TIMEX_H__
+#define __TIMEX_H__
+
+/* Bogus value to allow the kernel to compile. */
+#define CLOCK_TICK_RATE 1000000
+
+#endif /* __TIMEX_H__ */
+
diff --git a/arch/arm/mach-picoxcell/include/mach/uncompress.h b/arch/arm/mach-picoxcell/include/mach/uncompress.h
new file mode 100644
index 000000000000..b60b19d1d739
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/uncompress.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define putc(c)
+#define flush()
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-picoxcell/include/mach/vmalloc.h b/arch/arm/mach-picoxcell/include/mach/vmalloc.h
new file mode 100644
index 000000000000..0216cc4b1f0b
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/vmalloc.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#define VMALLOC_END 0xfe000000UL
diff --git a/arch/arm/mach-picoxcell/io.c b/arch/arm/mach-picoxcell/io.c
new file mode 100644
index 000000000000..39e9b9e8cc37
--- /dev/null
+++ b/arch/arm/mach-picoxcell/io.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * All enquiries to support@picochip.com
+ */
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/map.h>
+#include <mach/picoxcell_soc.h>
+
+#include "common.h"
+
+void __init picoxcell_map_io(void)
+{
+ struct map_desc io_map = {
+ .virtual = PHYS_TO_IO(PICOXCELL_PERIPH_BASE),
+ .pfn = __phys_to_pfn(PICOXCELL_PERIPH_BASE),
+ .length = PICOXCELL_PERIPH_LENGTH,
+ .type = MT_DEVICE,
+ };
+
+ iotable_init(&io_map, 1);
+}
diff --git a/arch/arm/mach-picoxcell/time.c b/arch/arm/mach-picoxcell/time.c
new file mode 100644
index 000000000000..90a554ff4499
--- /dev/null
+++ b/arch/arm/mach-picoxcell/time.c
@@ -0,0 +1,132 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * All enquiries to support@picochip.com
+ */
+#include <linux/dw_apb_timer.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched.h>
+
+#include <asm/mach/time.h>
+#include <asm/sched_clock.h>
+
+#include "common.h"
+
+static void timer_get_base_and_rate(struct device_node *np,
+ void __iomem **base, u32 *rate)
+{
+ *base = of_iomap(np, 0);
+
+ if (!*base)
+ panic("Unable to map regs for %s", np->name);
+
+ if (of_property_read_u32(np, "clock-freq", rate))
+ panic("No clock-freq property for %s", np->name);
+}
+
+static void picoxcell_add_clockevent(struct device_node *event_timer)
+{
+ void __iomem *iobase;
+ struct dw_apb_clock_event_device *ced;
+ u32 irq, rate;
+
+ irq = irq_of_parse_and_map(event_timer, 0);
+ if (irq == NO_IRQ)
+ panic("No IRQ for clock event timer");
+
+ timer_get_base_and_rate(event_timer, &iobase, &rate);
+
+ ced = dw_apb_clockevent_init(0, event_timer->name, 300, iobase, irq,
+ rate);
+ if (!ced)
+ panic("Unable to initialise clockevent device");
+
+ dw_apb_clockevent_register(ced);
+}
+
+static void picoxcell_add_clocksource(struct device_node *source_timer)
+{
+ void __iomem *iobase;
+ struct dw_apb_clocksource *cs;
+ u32 rate;
+
+ timer_get_base_and_rate(source_timer, &iobase, &rate);
+
+ cs = dw_apb_clocksource_init(300, source_timer->name, iobase, rate);
+ if (!cs)
+ panic("Unable to initialise clocksource device");
+
+ dw_apb_clocksource_start(cs);
+ dw_apb_clocksource_register(cs);
+}
+
+static DEFINE_CLOCK_DATA(cd);
+static void __iomem *sched_io_base;
+
+unsigned long long notrace sched_clock(void)
+{
+ cycle_t cyc = sched_io_base ? __raw_readl(sched_io_base) : 0;
+
+ return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+}
+
+static void notrace picoxcell_update_sched_clock(void)
+{
+ cycle_t cyc = sched_io_base ? __raw_readl(sched_io_base) : 0;
+
+ update_sched_clock(&cd, cyc, (u32)~0);
+}
+
+static const struct of_device_id picoxcell_rtc_ids[] __initconst = {
+ { .compatible = "picochip,pc3x2-rtc" },
+ { /* Sentinel */ },
+};
+
+static void picoxcell_init_sched_clock(void)
+{
+ struct device_node *sched_timer;
+ u32 rate;
+
+ sched_timer = of_find_matching_node(NULL, picoxcell_rtc_ids);
+ if (!sched_timer)
+ panic("No RTC for sched clock to use");
+
+ timer_get_base_and_rate(sched_timer, &sched_io_base, &rate);
+ of_node_put(sched_timer);
+
+ init_sched_clock(&cd, picoxcell_update_sched_clock, 32, rate);
+}
+
+static const struct of_device_id picoxcell_timer_ids[] __initconst = {
+ { .compatible = "picochip,pc3x2-timer" },
+ {},
+};
+
+static void __init picoxcell_timer_init(void)
+{
+ struct device_node *event_timer, *source_timer;
+
+ event_timer = of_find_matching_node(NULL, picoxcell_timer_ids);
+ if (!event_timer)
+ panic("No timer for clockevent");
+ picoxcell_add_clockevent(event_timer);
+
+ source_timer = of_find_matching_node(event_timer, picoxcell_timer_ids);
+ if (!source_timer)
+ panic("No timer for clocksource");
+ picoxcell_add_clocksource(source_timer);
+
+ of_node_put(source_timer);
+
+ picoxcell_init_sched_clock();
+}
+
+struct sys_timer picoxcell_timer = {
+ .init = picoxcell_timer_init,
+};