diff options
224 files changed, 5252 insertions, 1173 deletions
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface index dcbd502c8792..82def883361b 100644 --- a/Documentation/hwmon/sysfs-interface +++ b/Documentation/hwmon/sysfs-interface @@ -353,10 +353,20 @@ power[1-*]_average Average power use Unit: microWatt RO -power[1-*]_average_interval Power use averaging interval +power[1-*]_average_interval Power use averaging interval. A poll + notification is sent to this file if the + hardware changes the averaging interval. Unit: milliseconds RW +power[1-*]_average_interval_max Maximum power use averaging interval + Unit: milliseconds + RO + +power[1-*]_average_interval_min Minimum power use averaging interval + Unit: milliseconds + RO + power[1-*]_average_highest Historical average maximum power use Unit: microWatt RO @@ -365,6 +375,18 @@ power[1-*]_average_lowest Historical average minimum power use Unit: microWatt RO +power[1-*]_average_max A poll notification is sent to + power[1-*]_average when power use + rises above this value. + Unit: microWatt + RW + +power[1-*]_average_min A poll notification is sent to + power[1-*]_average when power use + sinks below this value. + Unit: microWatt + RW + power[1-*]_input Instantaneous power use Unit: microWatt RO @@ -381,6 +403,39 @@ power[1-*]_reset_history Reset input_highest, input_lowest, average_highest and average_lowest. WO +power[1-*]_accuracy Accuracy of the power meter. + Unit: Percent + RO + +power[1-*]_alarm 1 if the system is drawing more power than the + cap allows; 0 otherwise. A poll notification is + sent to this file when the power use exceeds the + cap. This file only appears if the cap is known + to be enforced by hardware. + RO + +power[1-*]_cap If power use rises above this limit, the + system should take action to reduce power use. + A poll notification is sent to this file if the + cap is changed by the hardware. The *_cap + files only appear if the cap is known to be + enforced by hardware. + Unit: microWatt + RW + +power[1-*]_cap_hyst Margin of hysteresis built around capping and + notification. + Unit: microWatt + RW + +power[1-*]_cap_max Maximum cap that can be set. + Unit: microWatt + RO + +power[1-*]_cap_min Minimum cap that can be set. + Unit: microWatt + RO + ********** * Energy * ********** diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c index ba9373f82ab5..098de5bce00a 100644 --- a/Documentation/lguest/lguest.c +++ b/Documentation/lguest/lguest.c @@ -42,7 +42,6 @@ #include <signal.h> #include "linux/lguest_launcher.h" #include "linux/virtio_config.h" -#include <linux/virtio_ids.h> #include "linux/virtio_net.h" #include "linux/virtio_blk.h" #include "linux/virtio_console.h" diff --git a/Documentation/vm/hwpoison.txt b/Documentation/vm/hwpoison.txt new file mode 100644 index 000000000000..3ffadf8da61f --- /dev/null +++ b/Documentation/vm/hwpoison.txt @@ -0,0 +1,136 @@ +What is hwpoison? + +Upcoming Intel CPUs have support for recovering from some memory errors +(``MCA recovery''). This requires the OS to declare a page "poisoned", +kill the processes associated with it and avoid using it in the future. + +This patchkit implements the necessary infrastructure in the VM. + +To quote the overview comment: + + * High level machine check handler. Handles pages reported by the + * hardware as being corrupted usually due to a 2bit ECC memory or cache + * failure. + * + * This focusses on pages detected as corrupted in the background. + * When the current CPU tries to consume corruption the currently + * running process can just be killed directly instead. This implies + * that if the error cannot be handled for some reason it's safe to + * just ignore it because no corruption has been consumed yet. Instead + * when that happens another machine check will happen. + * + * Handles page cache pages in various states. The tricky part + * here is that we can access any page asynchronous to other VM + * users, because memory failures could happen anytime and anywhere, + * possibly violating some of their assumptions. This is why this code + * has to be extremely careful. Generally it tries to use normal locking + * rules, as in get the standard locks, even if that means the + * error handling takes potentially a long time. + * + * Some of the operations here are somewhat inefficient and have non + * linear algorithmic complexity, because the data structures have not + * been optimized for this case. This is in particular the case + * for the mapping from a vma to a process. Since this case is expected + * to be rare we hope we can get away with this. + +The code consists of a the high level handler in mm/memory-failure.c, +a new page poison bit and various checks in the VM to handle poisoned +pages. + +The main target right now is KVM guests, but it works for all kinds +of applications. KVM support requires a recent qemu-kvm release. + +For the KVM use there was need for a new signal type so that +KVM can inject the machine check into the guest with the proper +address. This in theory allows other applications to handle +memory failures too. The expection is that near all applications +won't do that, but some very specialized ones might. + +--- + +There are two (actually three) modi memory failure recovery can be in: + +vm.memory_failure_recovery sysctl set to zero: + All memory failures cause a panic. Do not attempt recovery. + (on x86 this can be also affected by the tolerant level of the + MCE subsystem) + +early kill + (can be controlled globally and per process) + Send SIGBUS to the application as soon as the error is detected + This allows applications who can process memory errors in a gentle + way (e.g. drop affected object) + This is the mode used by KVM qemu. + +late kill + Send SIGBUS when the application runs into the corrupted page. + This is best for memory error unaware applications and default + Note some pages are always handled as late kill. + +--- + +User control: + +vm.memory_failure_recovery + See sysctl.txt + +vm.memory_failure_early_kill + Enable early kill mode globally + +PR_MCE_KILL + Set early/late kill mode/revert to system default + arg1: PR_MCE_KILL_CLEAR: Revert to system default + arg1: PR_MCE_KILL_SET: arg2 defines thread specific mode + PR_MCE_KILL_EARLY: Early kill + PR_MCE_KILL_LATE: Late kill + PR_MCE_KILL_DEFAULT: Use system global default +PR_MCE_KILL_GET + return current mode + + +--- + +Testing: + +madvise(MADV_POISON, ....) + (as root) + Poison a page in the process for testing + + +hwpoison-inject module through debugfs + /sys/debug/hwpoison/corrupt-pfn + +Inject hwpoison fault at PFN echoed into this file + + +Architecture specific MCE injector + +x86 has mce-inject, mce-test + +Some portable hwpoison test programs in mce-test, see blow. + +--- + +References: + +http://halobates.de/mce-lc09-2.pdf + Overview presentation from LinuxCon 09 + +git://git.kernel.org/pub/scm/utils/cpu/mce/mce-test.git + Test suite (hwpoison specific portable tests in tsrc) + +git://git.kernel.org/pub/scm/utils/cpu/mce/mce-inject.git + x86 specific injector + + +--- + +Limitations: + +- Not all page types are supported and never will. Most kernel internal +objects cannot be recovered, only LRU pages for now. +- Right now hugepage support is missing. + +--- +Andi Kleen, Oct 2009 + diff --git a/MAINTAINERS b/MAINTAINERS index 88241154f4ce..a1a2aceca5bd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -65,43 +65,51 @@ trivial patch so apply some common sense. 8. Happy hacking. - ----------------------------------- - -Maintainers List (try to look for most precise areas first) +Descriptions of section entries: + + P: Person (obsolete) + M: Mail patches to: FullName <address@domain> + L: Mailing list that is relevant to this area + W: Web-page with status/info + T: SCM tree type and location. Type is one of: git, hg, quilt, stgit. + S: Status, one of the following: + Supported: Someone is actually paid to look after this. + Maintained: Someone actually looks after it. + Odd Fixes: It has a maintainer but they don't have time to do + much other than throw the odd patch in. See below.. + Orphan: No current maintainer [but maybe you could take the + role as you write your new code]. + Obsolete: Old code. Something tagged obsolete generally means + it has been replaced by a better system and you + should be using that. + F: Files and directories with wildcard patterns. + A trailing slash includes all files and subdirectory files. + F: drivers/net/ all files in and below drivers/net + F: drivers/net/* all files in drivers/net, but not below + F: */net/* all files in "any top level directory"/net + One pattern per line. Multiple F: lines acceptable. + X: Files and directories that are NOT maintained, same rules as F: + Files exclusions are tested before file matches. + Can be useful for excluding a specific subdirectory, for instance: + F: net/ + X: net/ipv6/ + matches all files in and below net excluding net/ipv6/ + K: Keyword perl extended regex pattern to match content in a + patch or file. For instance: + K: of_get_profile + matches patches or files that contain "of_get_profile" + K: \b(printk|pr_(info|err))\b + matches patches or files that contain one or more of the words + printk, pr_info or pr_err + One regex pattern per line. Multiple K: lines acceptable. Note: For the hard of thinking, this list is meant to remain in alphabetical order. If you could add yourselves to it in alphabetical order that would be so much easier [Ed] -P: Person (obsolete) -M: Mail patches to: FullName <address@domain> -L: Mailing list that is relevant to this area -W: Web-page with status/info -T: SCM tree type and location. Type is one of: git, hg, quilt, stgit. -S: Status, one of the following: - - Supported: Someone is actually paid to look after this. - Maintained: Someone actually looks after it. - Odd Fixes: It has a maintainer but they don't have time to do - much other than throw the odd patch in. See below.. - Orphan: No current maintainer [but maybe you could take the - role as you write your new code]. - Obsolete: Old code. Something tagged obsolete generally means - it has been replaced by a better system and you - should be using that. +Maintainers List (try to look for most precise areas first) -F: Files and directories with wildcard patterns. - A trailing slash includes all files and subdirectory files. - F: drivers/net/ all files in and below drivers/net - F: drivers/net/* all files in drivers/net, but not below - F: */net/* all files in "any top level directory"/net - One pattern per line. Multiple F: lines acceptable. -X: Files and directories that are NOT maintained, same rules as F: - Files exclusions are tested before file matches. - Can be useful for excluding a specific subdirectory, for instance: - F: net/ - X: net/ipv6/ - matches all files in and below net excluding net/ipv6/ + ----------------------------------- 3C505 NETWORK DRIVER M: Philip Blundell <philb@gnu.org> @@ -992,7 +1000,7 @@ F: drivers/net/atlx/ ATM M: Chas Williams <chas@cmf.nrl.navy.mil> -L: linux-atm-general@lists.sourceforge.net (subscribers-only) +L: linux-atm-general@lists.sourceforge.net (moderated for non-subscribers) L: netdev@vger.kernel.org W: http://linux-atm.sourceforge.net S: Maintained @@ -1480,6 +1488,7 @@ F: mm/*cgroup* CORETEMP HARDWARE MONITORING DRIVER M: Rudolf Marek <r.marek@assembler.cz> +M: Huaxu Wan <huaxu.wan@intel.com> L: lm-sensors@lm-sensors.org S: Maintained F: Documentation/hwmon/coretemp @@ -2151,7 +2160,7 @@ S: Supported F: arch/powerpc/sysdev/qe_lib/ F: arch/powerpc/include/asm/*qe.h -FREESCALE USB PERIPHERIAL DRIVERS +FREESCALE USB PERIPHERAL DRIVERS M: Li Yang <leoli@freescale.com> L: linux-usb@vger.kernel.org L: linuxppc-dev@ozlabs.org @@ -2202,18 +2211,6 @@ F: Documentation/filesystems/caching/ F: fs/fscache/ F: include/linux/fscache*.h -TRACING -M: Steven Rostedt <rostedt@goodmis.org> -M: Frederic Weisbecker <fweisbec@gmail.com> -M: Ingo Molnar <mingo@redhat.com> -T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git tracing/core -S: Maintained -F: Documentation/trace/ftrace.txt -F: arch/*/*/*/ftrace.h -F: arch/*/kernel/ftrace.c -F: include/*/ftrace.h include/trace/ include/linux/trace*.h -F: kernel/trace/ - FUJITSU FR-V (FRV) PORT M: David Howells <dhowells@redhat.com> S: Maintained @@ -2272,9 +2269,8 @@ S: Maintained F: include/asm-generic GENERIC UIO DRIVER FOR PCI DEVICES -M: Michael S. Tsirkin <mst@redhat.com> +M: "Michael S. Tsirkin" <mst@redhat.com> L: kvm@vger.kernel.org -L: linux-kernel@vger.kernel.org S: Supported F: drivers/uio/uio_pci_generic.c @@ -3004,8 +3000,8 @@ F: scripts/Makefile.* KERNEL JANITORS L: kernel-janitors@vger.kernel.org -W: http://www.kerneljanitors.org/ -S: Maintained +W: http://janitor.kernelnewbies.org/ +S: Odd Fixes KERNEL NFSD, SUNRPC, AND LOCKD SERVERS M: "J. Bruce Fields" <bfields@fieldses.org> @@ -3785,7 +3781,7 @@ F: drivers/video/riva/ F: drivers/video/nvidia/ OMAP SUPPORT -M: "Tony Lindgren <tony@atomide.com>" <tony@atomide.com> +M: Tony Lindgren <tony@atomide.com> L: linux-omap@vger.kernel.org W: http://www.muru.com/linux/omap/ W: http://linux.omap.com/ @@ -3890,6 +3886,15 @@ S: Maintained F: Documentation/i2c/busses/i2c-ocores F: drivers/i2c/busses/i2c-ocores.c +OPEN FIRMWARE AND FLATTENED DEVICE TREE +M: Grant Likely <grant.likely@secretlab.ca> +L: devicetree-discuss@lists.ozlabs.org +W: http://fdt.secretlab.ca +S: Maintained +F: drivers/of +F: include/linux/of*.h +K: of_get_property + OPROFILE M: Robert Richter <robert.richter@amd.com> L: oprofile-list@lists.sf.net @@ -4325,7 +4330,7 @@ F: drivers/video/aty/aty128fb.c RALINK RT2X00 WIRELESS LAN DRIVER P: rt2x00 project L: linux-wireless@vger.kernel.org -L: users@rt2x00.serialmonkey.com +L: users@rt2x00.serialmonkey.com (moderated for non-subscribers) W: http://rt2x00.serialmonkey.com/ S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git @@ -4534,12 +4539,11 @@ F: kernel/sched* F: include/linux/sched.h SCORE ARCHITECTURE -P: Chen Liqin -M: liqin.chen@sunplusct.com -P: Lennox Wu -M: lennox.wu@gmail.com +M: Chen Liqin <liqin.chen@sunplusct.com> +M: Lennox Wu <lennox.wu@gmail.com> W: http://www.sunplusct.com S: Supported +F: arch/score/ SCSI CDROM DRIVER M: Jens Axboe <axboe@kernel.dk> @@ -4612,20 +4616,20 @@ S: Maintained F: drivers/mmc/host/sdricoh_cs.c SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER -S: Orphan -L: linux-mmc@vger.kernel.org -F: drivers/mmc/host/sdhci.* +S: Orphan +L: linux-mmc@vger.kernel.org +F: drivers/mmc/host/sdhci.* SECURE DIGITAL HOST CONTROLLER INTERFACE, OPEN FIRMWARE BINDINGS (SDHCI-OF) M: Anton Vorontsov <avorontsov@ru.mvista.com> L: linuxppc-dev@ozlabs.org -L: linux-mmc@vger.kernel.org +L: linux-mmc@vger.kernel.org S: Maintained -F: drivers/mmc/host/sdhci-of.* +F: drivers/mmc/host/sdhci-of.* SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) SAMSUNG DRIVER M: Ben Dooks <ben-linux@fluff.org> -L: linux-mmc@vger.kernel.org +L: linux-mmc@vger.kernel.org S: Maintained F: drivers/mmc/host/sdhci-s3c.c @@ -4728,8 +4732,7 @@ F: drivers/usb/gadget/lh7a40* F: drivers/usb/host/ohci-lh7a40* SIMPLE FIRMWARE INTERFACE (SFI) -P: Len Brown -M: lenb@kernel.org +M: Len Brown <lenb@kernel.org> L: sfi-devel@simplefirmware.org W: http://simplefirmware.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6.git @@ -5177,6 +5180,20 @@ L: tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers) S: Maintained F: drivers/char/tpm/ +TRACING +M: Steven Rostedt <rostedt@goodmis.org> +M: Frederic Weisbecker <fweisbec@gmail.com> +M: Ingo Molnar <mingo@redhat.com> +T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git tracing/core +S: Maintained +F: Documentation/trace/ftrace.txt +F: arch/*/*/*/ftrace.h +F: arch/*/kernel/ftrace.c +F: include/*/ftrace.h +F: include/linux/trace*.h +F: include/trace/ +F: kernel/trace/ + TRIVIAL PATCHES M: Jiri Kosina <trivial@kernel.org> T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial.git @@ -5743,8 +5760,7 @@ S: Maintained F: drivers/scsi/wd7000.c WINBOND CIR DRIVER -P: David Härdeman -M: david@hardeman.nu +M: David Härdeman <david@hardeman.nu> S: Maintained F: drivers/input/misc/winbond-cir.c @@ -5801,9 +5817,7 @@ F: drivers/input/touchscreen/*wm97* F: include/linux/wm97xx.h WOLFSON MICROELECTRONICS PMIC DRIVERS -P: Mark Brown -M: broonie@opensource.wolfsonmicro.com -L: linux-kernel@vger.kernel.org +M: Mark Brown <broonie@opensource.wolfsonmicro.com> T: git git://opensource.wolfsonmicro.com/linux-2.6-audioplus W: http://opensource.wolfsonmicro.com/node/8 S: Supported diff --git a/arch/arm/configs/n8x0_defconfig b/arch/arm/configs/n8x0_defconfig index 8da75dede52e..264f52b5c52d 100644 --- a/arch/arm/configs/n8x0_defconfig +++ b/arch/arm/configs/n8x0_defconfig @@ -304,7 +304,7 @@ CONFIG_ALIGNMENT_TRAP=y CONFIG_ZBOOT_ROM_TEXT=0x10C08000 CONFIG_ZBOOT_ROM_BSS=0x10200000 # CONFIG_ZBOOT_ROM is not set -CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS0,115200n8" +CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS2,115200n8" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig index 7d61ae6e75da..953ba0297fc4 100644 --- a/arch/arm/configs/u300_defconfig +++ b/arch/arm/configs/u300_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc3 -# Thu Jul 16 23:36:10 2009 +# Linux kernel version: 2.6.32-rc5 +# Sat Oct 17 23:32:24 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y +CONFIG_HAVE_TCM=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -44,11 +44,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -80,17 +81,15 @@ CONFIG_SHMEM=y # CONFIG_AIO is not set # -# Performance Counters +# Kernel Performance Events And Counters # # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y @@ -133,6 +132,7 @@ CONFIG_DEFAULT_IOSCHED="deadline" # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set @@ -147,6 +147,7 @@ CONFIG_DEFAULT_IOSCHED="deadline" # CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -169,11 +170,13 @@ CONFIG_DEFAULT_IOSCHED="deadline" # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set CONFIG_ARCH_U300=y # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set # # ST-Ericsson AB U300/U330/U335/U365 Platform @@ -195,6 +198,7 @@ CONFIG_MACH_U300_BS335=y CONFIG_MACH_U300_DUAL_RAM=y CONFIG_U300_DEBUG=y # CONFIG_MACH_U300_SEMI_IS_SHARED is not set +CONFIG_MACH_U300_SPIDUMMY=y # # All the settings below must match the bootloader's settings @@ -207,7 +211,7 @@ CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y -CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_PABRT_LEGACY=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y CONFIG_CPU_TLB_V4WBI=y @@ -222,6 +226,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 CONFIG_ARM_VIC=y CONFIG_ARM_VIC_NR=2 CONFIG_COMMON_CLKDEV=y @@ -245,6 +250,8 @@ CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y @@ -265,6 +272,7 @@ CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y # CONFIG_UACCESS_WITH_MEMCPY is not set @@ -313,6 +321,7 @@ CONFIG_PM=y # CONFIG_PM_DEBUG is not set # CONFIG_SUSPEND is not set # CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y @@ -351,6 +360,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -391,6 +401,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y @@ -402,9 +413,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -453,6 +464,7 @@ CONFIG_MTD_CFI_I2=y # # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -520,6 +532,7 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_NETDEVICES is not set # CONFIG_ISDN is not set +# CONFIG_PHONE is not set # # Input device support @@ -540,12 +553,16 @@ CONFIG_INPUT_EVDEV=y # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set # CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_GPIO is not set # CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set @@ -597,6 +614,7 @@ CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set CONFIG_I2C_HELPER_AUTO=y @@ -629,9 +647,6 @@ CONFIG_I2C_STU300=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -653,16 +668,21 @@ CONFIG_SPI_PL022=y # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_DS2782 is not set # CONFIG_BATTERY_BQ27x00 is not set # CONFIG_BATTERY_MAX17040 is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -690,10 +710,24 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TC6387XB is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set CONFIG_AB3100_CORE=y +CONFIG_AB3100_OTP=y # CONFIG_EZX_PCAP is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +# CONFIG_REGULATOR_LP3971 is not set +CONFIG_REGULATOR_AB3100=y +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set # CONFIG_MEDIA_SUPPORT is not set # @@ -792,9 +826,10 @@ CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_MMC_ARMMMCI=y # CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set # CONFIG_MMC_SPI is not set # CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -820,10 +855,10 @@ CONFIG_LEDS_TRIGGER_BACKLIGHT=y # # iptables trigger is under Netfilter config (LED target) # +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_HCTOSYS is not set # CONFIG_RTC_DEBUG is not set # @@ -863,6 +898,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -878,27 +914,25 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set +CONFIG_RTC_DRV_AB3100=y # # on-CPU RTC drivers # # CONFIG_RTC_DRV_PL030 is not set # CONFIG_RTC_DRV_PL031 is not set +CONFIG_RTC_DRV_COH901331=y CONFIG_DMADEVICES=y # # DMA Devices # # CONFIG_AUXDISPLAY is not set -CONFIG_REGULATOR=y -# CONFIG_REGULATOR_DEBUG is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set -# CONFIG_REGULATOR_MAX1586 is not set -# CONFIG_REGULATOR_LP3971 is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -913,6 +947,7 @@ CONFIG_REGULATOR=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set @@ -975,7 +1010,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set # @@ -1033,6 +1067,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1066,11 +1101,13 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set @@ -1121,6 +1158,7 @@ CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_GENERIC_ALLOCATOR=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index c3b911ee9151..6aac3f5bb2f3 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -98,6 +98,9 @@ extern int elf_check_arch(const struct elf32_hdr *); extern int arm_elf_read_implies_exec(const struct elf32_hdr *, int); #define elf_read_implies_exec(ex,stk) arm_elf_read_implies_exec(&(ex), stk) +int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs); +#define ELF_CORE_COPY_TASK_REGS dump_task_regs + #define USE_ELF_CORE_DUMP #define ELF_EXEC_PAGESIZE 4096 diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index a45ab5dd8255..c2f1605de359 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -350,7 +350,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm) if (tlb_flag(TLB_WB)) dsb(); - if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) { + if (cpumask_test_cpu(get_cpu(), mm_cpumask(mm))) { if (tlb_flag(TLB_V3_FULL)) asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc"); if (tlb_flag(TLB_V4_U_FULL)) @@ -360,6 +360,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm) if (tlb_flag(TLB_V4_I_FULL)) asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc"); } + put_cpu(); if (tlb_flag(TLB_V6_U_ASID)) asm("mcr p15, 0, %0, c8, c7, 2" : : "r" (asid) : "cc"); diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 322410be573c..0022b4d57f8b 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -608,33 +608,33 @@ call_fpe: THUMB( add pc, r8 ) nop - W(mov) pc, lr @ CP#0 + movw_pc lr @ CP#0 W(b) do_fpe @ CP#1 (FPE) W(b) do_fpe @ CP#2 (FPE) - W(mov) pc, lr @ CP#3 + movw_pc lr @ CP#3 #ifdef CONFIG_CRUNCH b crunch_task_enable @ CP#4 (MaverickCrunch) b crunch_task_enable @ CP#5 (MaverickCrunch) b crunch_task_enable @ CP#6 (MaverickCrunch) #else - W(mov) pc, lr @ CP#4 - W(mov) pc, lr @ CP#5 - W(mov) pc, lr @ CP#6 + movw_pc lr @ CP#4 + movw_pc lr @ CP#5 + movw_pc lr @ CP#6 #endif - W(mov) pc, lr @ CP#7 - W(mov) pc, lr @ CP#8 - W(mov) pc, lr @ CP#9 + movw_pc lr @ CP#7 + movw_pc lr @ CP#8 + movw_pc lr @ CP#9 #ifdef CONFIG_VFP W(b) do_vfp @ CP#10 (VFP) W(b) do_vfp @ CP#11 (VFP) #else - W(mov) pc, lr @ CP#10 (VFP) - W(mov) pc, lr @ CP#11 (VFP) + movw_pc lr @ CP#10 (VFP) + movw_pc lr @ CP#11 (VFP) #endif - W(mov) pc, lr @ CP#12 - W(mov) pc, lr @ CP#13 - W(mov) pc, lr @ CP#14 (Debug) - W(mov) pc, lr @ CP#15 (Control) + movw_pc lr @ CP#12 + movw_pc lr @ CP#13 + movw_pc lr @ CP#14 (Debug) + movw_pc lr @ CP#15 (Control) #ifdef CONFIG_NEON .align 6 diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index ac34c0d9384b..7e9ed1eea40a 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -110,6 +110,13 @@ mov \rd, sp, lsr #13 mov \rd, \rd, lsl #13 .endm + + @ + @ 32-bit wide "mov pc, reg" + @ + .macro movw_pc, reg + mov pc, \reg + .endm #else /* CONFIG_THUMB2_KERNEL */ .macro svc_exit, rpsr clrex @ clear the exclusive monitor @@ -146,6 +153,14 @@ lsr \rd, \rd, #13 mov \rd, \rd, lsl #13 .endm + + @ + @ 32-bit wide "mov pc, reg" + @ + .macro movw_pc, reg + mov pc, \reg + nop + .endm #endif /* !CONFIG_THUMB2_KERNEL */ /* diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 790fbee92ec5..0d96d0171c05 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -328,6 +328,15 @@ copy_thread(unsigned long clone_flags, unsigned long stack_start, } /* + * Fill in the task's elfregs structure for a core dump. + */ +int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs) +{ + elf_core_copy_regs(elfregs, task_pt_regs(t)); + return 1; +} + +/* * fill in the fpe structure for a core dump... */ int dump_fpu (struct pt_regs *regs, struct user_fp *fp) diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index d581cff80c4c..332b784050b2 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -838,7 +838,7 @@ static void __init at91_add_device_rtt(void) * Watchdog * -------------------------------------------------------------------- */ -#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE) +#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE) static struct platform_device at91sam9g45_wdt_device = { .name = "at91_wdt", .id = -1, diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index f95dc160c34b..b4357c388d2e 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -206,7 +206,6 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc) for (i = 0; i < 8; i++) { if (status & (1 << i)) { int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i; - desc = irq_desc + gpio_irq; generic_handle_irq(gpio_irq); } } diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index ca71cf1a72a0..a4a7be308000 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -112,7 +112,7 @@ static void __init edb93xx_register_i2c(void) ARRAY_SIZE(edb93xxa_i2c_board_info)); } else if (machine_is_edb9307() || machine_is_edb9312() || machine_is_edb9315()) { - ep93xx_register_i2c(&edb93xx_i2c_gpio_data + ep93xx_register_i2c(&edb93xx_i2c_gpio_data, edb93xx_i2c_board_info, ARRAY_SIZE(edb93xx_i2c_board_info)); } diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h index a3ec33fd79d4..469fd968d517 100644 --- a/arch/arm/mach-ep93xx/include/mach/platform.h +++ b/arch/arm/mach-ep93xx/include/mach/platform.h @@ -17,7 +17,6 @@ struct ep93xx_eth_data void ep93xx_map_io(void); void ep93xx_init_irq(void); -void ep93xx_init_time(unsigned long); /* EP93xx System Controller software locked register write */ void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg); diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c index 4089951acb47..ff5e33298914 100644 --- a/arch/arm/mach-mx2/clock_imx27.c +++ b/arch/arm/mach-mx2/clock_imx27.c @@ -638,9 +638,9 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk) _REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk) _REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk) - _REGISTER_CLOCK(NULL, "cspi1", cspi1_clk) - _REGISTER_CLOCK(NULL, "cspi2", cspi2_clk) - _REGISTER_CLOCK(NULL, "cspi3", cspi3_clk) + _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk) + _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk) + _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk) _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk) _REGISTER_CLOCK(NULL, "csi", csi_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk) @@ -665,7 +665,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "sahara2", sahara2_clk) _REGISTER_CLOCK(NULL, "ata", ata_clk) _REGISTER_CLOCK(NULL, "mstick", mstick_clk) - _REGISTER_CLOCK(NULL, "wdog", wdog_clk) + _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk) _REGISTER_CLOCK(NULL, "gpio", gpio_clk) _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk) _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk) diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c index ee65dda584cf..906d59b0a7aa 100644 --- a/arch/arm/mach-mx2/pcm038.c +++ b/arch/arm/mach-mx2/pcm038.c @@ -23,6 +23,10 @@ #include <linux/mtd/plat-ram.h> #include <linux/mtd/physmap.h> #include <linux/platform_device.h> +#include <linux/regulator/machine.h> +#include <linux/mfd/mc13783.h> +#include <linux/spi/spi.h> +#include <linux/irq.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -35,6 +39,7 @@ #include <mach/iomux.h> #include <mach/imx-uart.h> #include <mach/mxc_nand.h> +#include <mach/spi.h> #include "devices.h" @@ -78,8 +83,6 @@ static int pcm038_pins[] = { PC6_PF_I2C2_SCL, /* SPI1 */ PD25_PF_CSPI1_RDY, - PD27_PF_CSPI1_SS1, - PD28_PF_CSPI1_SS0, PD29_PF_CSPI1_SCLK, PD30_PF_CSPI1_MISO, PD31_PF_CSPI1_MOSI, @@ -196,6 +199,86 @@ static struct i2c_board_info pcm038_i2c_devices[] = { } }; +static int pcm038_spi_cs[] = {GPIO_PORTD + 28}; + +static struct spi_imx_master pcm038_spi_0_data = { + .chipselect = pcm038_spi_cs, + .num_chipselect = ARRAY_SIZE(pcm038_spi_cs), +}; + +static struct regulator_consumer_supply sdhc1_consumers[] = { + { + .dev = &mxc_sdhc_device1.dev, + .supply = "sdhc_vcc", + }, +}; + +static struct regulator_init_data sdhc1_data = { + .constraints = { + .min_uV = 3000000, + .max_uV = 3400000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_FAST, + .always_on = 0, + .boot_on = 0, + }, + .num_consumer_supplies = ARRAY_SIZE(sdhc1_consumers), + .consumer_supplies = sdhc1_consumers, +}; + +static struct regulator_consumer_supply cam_consumers[] = { + { + .dev = NULL, + .supply = "imx_cam_vcc", + }, +}; + +static struct regulator_init_data cam_data = { + .constraints = { + .min_uV = 3000000, + .max_uV = 3400000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_FAST, + .always_on = 0, + .boot_on = 0, + }, + .num_consumer_supplies = ARRAY_SIZE(cam_consumers), + .consumer_supplies = cam_consumers, +}; + +struct mc13783_regulator_init_data pcm038_regulators[] = { + { + .id = MC13783_REGU_VCAM, + .init_data = &cam_data, + }, { + .id = MC13783_REGU_VMMC1, + .init_data = &sdhc1_data, + }, +}; + +static struct mc13783_platform_data pcm038_pmic = { + .regulators = pcm038_regulators, + .num_regulators = ARRAY_SIZE(pcm038_regulators), + .flags = MC13783_USE_ADC | MC13783_USE_REGULATOR | + MC13783_USE_TOUCHSCREEN, +}; + +static struct spi_board_info pcm038_spi_board_info[] __initdata = { + { + .modalias = "mc13783", + .irq = IRQ_GPIOB(23), + .max_speed_hz = 300000, + .bus_num = 0, + .chip_select = 0, + .platform_data = &pcm038_pmic, + .mode = SPI_CS_HIGH, + } +}; + static void __init pcm038_init(void) { mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins), @@ -219,6 +302,15 @@ static void __init pcm038_init(void) /* PE18 for user-LED D40 */ mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT); + mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT); + + /* MC13783 IRQ */ + mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN); + + mxc_register_device(&mxc_spi_device0, &pcm038_spi_0_data); + spi_register_board_info(pcm038_spi_board_info, + ARRAY_SIZE(pcm038_spi_board_info)); + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); #ifdef CONFIG_MACH_PCM970_BASEBOARD diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c index c261f59b0b4c..3cb7f457e5d0 100644 --- a/arch/arm/mach-mx2/pcm970-baseboard.c +++ b/arch/arm/mach-mx2/pcm970-baseboard.c @@ -39,7 +39,6 @@ static int pcm970_pins[] = { PB7_PF_SD2_D3, PB8_PF_SD2_CMD, PB9_PF_SD2_CLK, - GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN, /* card detect */ /* display */ PA5_PF_LSCLK, PA6_PF_LD0, @@ -228,6 +227,7 @@ void __init pcm970_baseboard_init(void) "PCM970"); mxc_register_device(&mxc_fb_device, &pcm038_fb_data); + mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN); mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata); platform_device_register(&pcm970_sja1000); } diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c index eb12de1da42d..63511de3a559 100644 --- a/arch/arm/mach-mx25/devices.c +++ b/arch/arm/mach-mx25/devices.c @@ -1,4 +1,23 @@ +/* + * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + #include <linux/platform_device.h> +#include <linux/dma-mapping.h> #include <linux/gpio.h> #include <mach/mx25.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c index 92aa4fd19d99..d23ae571c03f 100644 --- a/arch/arm/mach-mx25/mx25pdk.c +++ b/arch/arm/mach-mx25/mx25pdk.c @@ -1,3 +1,21 @@ +/* + * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + #include <linux/types.h> #include <linux/init.h> #include <linux/clk.h> @@ -23,19 +41,12 @@ static struct imxuart_platform_data uart_pdata = { .flags = IMXUART_HAVE_RTSCTS, }; -static struct mxc_nand_platform_data nand_board_info = { - .width = 1, - .hw_ecc = 1, -}; - static void __init mx25pdk_init(void) { mxc_register_device(&mxc_uart_device0, &uart_pdata); mxc_register_device(&mxc_usbh2, NULL); - mxc_register_device(&mxc_nand_device, &nand_board_info); } - static void __init mx25pdk_timer_init(void) { mx25_clocks_init(26000000); diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c index fe5c4217322e..c595260ec1f9 100644 --- a/arch/arm/mach-mx3/clock-imx35.c +++ b/arch/arm/mach-mx3/clock-imx35.c @@ -443,7 +443,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk) _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk) - _REGISTER_CLOCK("mxc_wdt.0", NULL, wdog_clk) + _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk) _REGISTER_CLOCK(NULL, "max", max_clk) _REGISTER_CLOCK(NULL, "admux", admux_clk) _REGISTER_CLOCK(NULL, "csi", csi_clk) diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c index 06bd6180bfc3..b2a3bcf8266e 100644 --- a/arch/arm/mach-mx3/clock.c +++ b/arch/arm/mach-mx3/clock.c @@ -530,7 +530,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk) _REGISTER_CLOCK(NULL, "gpt", gpt_clk) _REGISTER_CLOCK(NULL, "pwm", pwm_clk) - _REGISTER_CLOCK(NULL, "wdog", wdog_clk) + _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk) _REGISTER_CLOCK(NULL, "rtc", rtc_clk) _REGISTER_CLOCK(NULL, "epit", epit1_clk) _REGISTER_CLOCK(NULL, "epit", epit2_clk) diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c index 8a577f367250..e6abe181b967 100644 --- a/arch/arm/mach-mx3/devices.c +++ b/arch/arm/mach-mx3/devices.c @@ -459,7 +459,7 @@ struct platform_device mxc_usbh2 = { * SPI master controller * 3 channels */ -static struct resource imx_spi_0_resources[] = { +static struct resource mxc_spi_0_resources[] = { { .start = CSPI1_BASE_ADDR, .end = CSPI1_BASE_ADDR + SZ_4K - 1, @@ -471,7 +471,7 @@ static struct resource imx_spi_0_resources[] = { }, }; -static struct resource imx_spi_1_resources[] = { +static struct resource mxc_spi_1_resources[] = { { .start = CSPI2_BASE_ADDR, .end = CSPI2_BASE_ADDR + SZ_4K - 1, @@ -483,7 +483,7 @@ static struct resource imx_spi_1_resources[] = { }, }; -static struct resource imx_spi_2_resources[] = { +static struct resource mxc_spi_2_resources[] = { { .start = CSPI3_BASE_ADDR, .end = CSPI3_BASE_ADDR + SZ_4K - 1, @@ -495,25 +495,25 @@ static struct resource imx_spi_2_resources[] = { }, }; -struct platform_device imx_spi_device0 = { +struct platform_device mxc_spi_device0 = { .name = "spi_imx", .id = 0, - .num_resources = ARRAY_SIZE(imx_spi_0_resources), - .resource = imx_spi_0_resources, + .num_resources = ARRAY_SIZE(mxc_spi_0_resources), + .resource = mxc_spi_0_resources, }; -struct platform_device imx_spi_device1 = { +struct platform_device mxc_spi_device1 = { .name = "spi_imx", .id = 1, - .num_resources = ARRAY_SIZE(imx_spi_1_resources), - .resource = imx_spi_1_resources, + .num_resources = ARRAY_SIZE(mxc_spi_1_resources), + .resource = mxc_spi_1_resources, }; -struct platform_device imx_spi_device2 = { +struct platform_device mxc_spi_device2 = { .name = "spi_imx", .id = 2, - .num_resources = ARRAY_SIZE(imx_spi_2_resources), - .resource = imx_spi_2_resources, + .num_resources = ARRAY_SIZE(mxc_spi_2_resources), + .resource = mxc_spi_2_resources, }; #ifdef CONFIG_ARCH_MX35 diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h index 79f2be45d139..ab87419dc9a0 100644 --- a/arch/arm/mach-mx3/devices.h +++ b/arch/arm/mach-mx3/devices.h @@ -20,7 +20,7 @@ extern struct platform_device mxc_otg_host; extern struct platform_device mxc_usbh1; extern struct platform_device mxc_usbh2; extern struct platform_device mxc_rnga_device; -extern struct platform_device imx_spi_device0; -extern struct platform_device imx_spi_device1; -extern struct platform_device imx_spi_device2; +extern struct platform_device mxc_spi_device0; +extern struct platform_device mxc_spi_device1; +extern struct platform_device mxc_spi_device2; diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c index ad5a1122d765..bedf5b8d976a 100644 --- a/arch/arm/mach-mx3/mm.c +++ b/arch/arm/mach-mx3/mm.c @@ -81,6 +81,7 @@ void __init mx31_map_io(void) iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); } +#ifdef CONFIG_ARCH_MX35 void __init mx35_map_io(void) { mxc_set_cpu_type(MXC_CPU_MX35); @@ -89,6 +90,7 @@ void __init mx35_map_io(void) iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); } +#endif void __init mx31_init_irq(void) { diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 42920f9c1a11..8ad5cc3e83e3 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -219,6 +219,10 @@ static struct platform_device *ams_delta_devices[] __initdata = { static void __init ams_delta_init(void) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc)); omap_board_config = ams_delta_config; @@ -231,6 +235,8 @@ static void __init ams_delta_init(void) omap_usb_init(&ams_delta_usb_config); platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices)); + + omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1); } static struct plat_serial8250_port ams_delta_modem_ports[] = { diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index fb47239da72f..6c8a41f20e51 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -64,6 +64,14 @@ static void __init omap_generic_init(void) { #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap15xx()) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + omap_usb_init(&generic1510_usb_config); } #endif diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index cc2abbb2d0f4..cd6c39514826 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -376,6 +376,26 @@ static void __init innovator_init(void) { #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { + unsigned char reg; + + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + + reg = fpga_read(OMAP1510_FPGA_POWER); + reg |= OMAP1510_FPGA_PCR_COM1_EN; + fpga_write(reg, OMAP1510_FPGA_POWER); + udelay(10); + + reg = fpga_read(OMAP1510_FPGA_POWER); + reg |= OMAP1510_FPGA_PCR_COM2_EN; + fpga_write(reg, OMAP1510_FPGA_POWER); + udelay(10); + platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices)); spi_register_board_info(innovator1510_boardinfo, ARRAY_SIZE(innovator1510_boardinfo)); diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 90dd0431b0dc..4de258420f39 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -342,6 +342,14 @@ static void __init palmte_misc_gpio_setup(void) static void __init omap_palmte_init(void) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + omap_board_config = palmte_config; omap_board_config_size = ARRAY_SIZE(palmte_config); diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 8256139891ff..d972cf941b76 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -289,6 +289,14 @@ static void __init omap_mpu_wdt_mode(int mode) { static void __init omap_palmtt_init(void) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + omap_mpu_wdt_mode(0); omap_board_config = palmtt_config; diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 81b6bde1c5a3..986bd4df0e97 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -307,6 +307,14 @@ palmz71_gpio_setup(int early) static void __init omap_palmz71_init(void) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + palmz71_gpio_setup(1); omap_mpu_wdt_mode(0); diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 02c85ca2e1df..056ae64e0f55 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -377,6 +377,14 @@ static struct omap_board_config_kernel sx1_config[] __initdata = { static void __init omap_sx1_init(void) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + platform_add_devices(sx1_devices, ARRAY_SIZE(sx1_devices)); omap_board_config = sx1_config; diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index c06e7a553472..07b07522d5bf 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -152,6 +152,14 @@ static void __init voiceblue_init_irq(void) static void __init voiceblue_init(void) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + /* Watchdog */ gpio_request(0, "Watchdog"); /* smc91x reset */ diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index d496e50fec40..d23979bc0fd5 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -131,8 +131,6 @@ void __init omap_serial_init(void) } for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { - unsigned char reg; - switch (i) { case 0: uart1_ck = clk_get(NULL, "uart1_ck"); @@ -143,16 +141,6 @@ void __init omap_serial_init(void) if (cpu_is_omap15xx()) clk_set_rate(uart1_ck, 12000000); } - if (cpu_is_omap15xx()) { - omap_cfg_reg(UART1_TX); - omap_cfg_reg(UART1_RTS); - if (machine_is_omap_innovator()) { - reg = fpga_read(OMAP1510_FPGA_POWER); - reg |= OMAP1510_FPGA_PCR_COM1_EN; - fpga_write(reg, OMAP1510_FPGA_POWER); - udelay(10); - } - } break; case 1: uart2_ck = clk_get(NULL, "uart2_ck"); @@ -165,16 +153,6 @@ void __init omap_serial_init(void) else clk_set_rate(uart2_ck, 48000000); } - if (cpu_is_omap15xx()) { - omap_cfg_reg(UART2_TX); - omap_cfg_reg(UART2_RTS); - if (machine_is_omap_innovator()) { - reg = fpga_read(OMAP1510_FPGA_POWER); - reg |= OMAP1510_FPGA_PCR_COM2_EN; - fpga_write(reg, OMAP1510_FPGA_POWER); - udelay(10); - } - } break; case 2: uart3_ck = clk_get(NULL, "uart3_ck"); @@ -185,10 +163,6 @@ void __init omap_serial_init(void) if (cpu_is_omap15xx()) clk_set_rate(uart3_ck, 12000000); } - if (cpu_is_omap15xx()) { - omap_cfg_reg(UART3_TX); - omap_cfg_reg(UART3_RX); - } break; } omap_serial_reset(&serial_platform_data[i]); diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 75b1c7efae7e..aad194f61a33 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -73,9 +73,21 @@ config MACH_OMAP_3430SDP bool "OMAP 3430 SDP board" depends on ARCH_OMAP3 && ARCH_OMAP34XX +config MACH_NOKIA_N800 + bool + +config MACH_NOKIA_N810 + bool + +config MACH_NOKIA_N810_WIMAX + bool + config MACH_NOKIA_N8X0 bool "Nokia N800/N810" depends on ARCH_OMAP2420 + select MACH_NOKIA_N800 + select MACH_NOKIA_N810 + select MACH_NOKIA_N810_WIMAX config MACH_NOKIA_RX51 bool "Nokia RX-51 board" diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index efaf053eba85..0acb5560229c 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -17,6 +17,7 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/input.h> +#include <linux/input/matrix_keypad.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/i2c/twl4030.h> @@ -38,7 +39,6 @@ #include <mach/gpmc.h> #include <mach/control.h> -#include <mach/keypad.h> #include <mach/gpmc-smc91x.h> #include "sdram-qimonda-hyb18m512160af-6.h" diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index eb37c40ea83a..609a5a4a7e29 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -58,6 +58,8 @@ static void __init gic_init_irq(void) static void __init omap_4430sdp_init_irq(void) { + omap_board_config = sdp4430_config; + omap_board_config_size = ARRAY_SIZE(sdp4430_config); omap2_init_common_hw(NULL, NULL); #ifdef CONFIG_OMAP_32K_TIMER omap2_gp_clockevent_set_gptimer(1); @@ -70,8 +72,6 @@ static void __init omap_4430sdp_init_irq(void) static void __init omap_4430sdp_init(void) { platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); - omap_board_config = sdp4430_config; - omap_board_config_size = ARRAY_SIZE(sdp4430_config); omap_serial_init(); } diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index d110a7fdfbd8..d57ec2f4d0a9 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -16,6 +16,7 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/input.h> +#include <linux/input/matrix_keypad.h> #include <linux/gpio_keys.h> #include <linux/workqueue.h> #include <linux/err.h> @@ -41,7 +42,6 @@ #include <asm/delay.h> #include <mach/control.h> #include <mach/usb.h> -#include <mach/keypad.h> #include "mmc-twl4030.h" diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index e4ec0c591216..4c4d7f8dbd72 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -20,6 +20,7 @@ #include <linux/clk.h> #include <linux/gpio.h> #include <linux/input.h> +#include <linux/input/matrix_keypad.h> #include <linux/leds.h> #include <linux/spi/spi.h> @@ -37,7 +38,6 @@ #include <mach/usb.h> #include <mach/common.h> #include <mach/mcspi.h> -#include <mach/keypad.h> #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 7f6bf8772af7..5326e0d61597 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -27,6 +27,7 @@ #include <linux/i2c/twl4030.h> #include <linux/leds.h> #include <linux/input.h> +#include <linux/input/matrix_keypad.h> #include <linux/gpio_keys.h> #include <asm/mach-types.h> @@ -39,7 +40,6 @@ #include <mach/hardware.h> #include <mach/mcspi.h> #include <mach/usb.h> -#include <mach/keypad.h> #include <mach/mux.h> #include "sdram-micron-mt46h32m32lf-6.h" diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 2b0eb1ba5d7f..e34d96a825e3 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/input.h> +#include <linux/input/matrix_keypad.h> #include <linux/spi/spi.h> #include <linux/i2c.h> #include <linux/i2c/twl4030.h> @@ -27,7 +28,6 @@ #include <mach/common.h> #include <mach/dma.h> #include <mach/gpmc.h> -#include <mach/keypad.h> #include <mach/onenand.h> #include <mach/gpmc-smc91x.h> diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index f9196c3b1a7b..78869a9a1cc2 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -26,7 +26,6 @@ #include <mach/mux.h> #include <mach/board.h> #include <mach/common.h> -#include <mach/keypad.h> #include <mach/dma.h> #include <mach/gpmc.h> #include <mach/usb.h> diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index fd3369d5e5cb..ea00486a5e53 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/input.h> +#include <linux/input/matrix_keypad.h> #include <linux/gpio.h> #include <linux/i2c/twl4030.h> #include <linux/regulator/machine.h> @@ -22,7 +23,6 @@ #include <mach/common.h> #include <mach/usb.h> -#include <mach/keypad.h> #include "mmc-twl4030.h" #include "sdram-micron-mt46h32m32lf-6.h" diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index e3a3bad1d84f..56be87d13edb 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -302,7 +302,9 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, pwrdm_init(powerdomains_omap); clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps); omap2_clk_init(); +#endif omap_serial_early_init(); +#ifndef CONFIG_ARCH_OMAP4 omap_hwmod_late_init(); omap_pm_if_init(); omap2_sdrc_init(sdrc_cs0, sdrc_cs1); diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 378c2f618358..89463190923a 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -639,14 +639,15 @@ static void __init prcm_setup_regs(void) prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); - /* Enable GPIO wakeups in PER */ + /* Enable wakeups in PER */ prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 | OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 | - OMAP3430_EN_GPIO6, OMAP3430_PER_MOD, PM_WKEN); + OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3, + OMAP3430_PER_MOD, PM_WKEN); /* and allow them to wake up MPU */ prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 | OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 | - OMAP3430_GRPSEL_GPIO6, + OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3, OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL); /* Don't attach IVA interrupts */ diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index ae2186892c85..54dfeb5d5667 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -109,16 +109,6 @@ static struct plat_serial8250_port serial_platform_data2[] = { .regshift = 2, .uartclk = OMAP24XX_BASE_BAUD * 16, }, { -#ifdef CONFIG_ARCH_OMAP4 - .membase = OMAP2_IO_ADDRESS(OMAP_UART4_BASE), - .mapbase = OMAP_UART4_BASE, - .irq = 70, - .flags = UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = OMAP24XX_BASE_BAUD * 16, - }, { -#endif .flags = 0 } }; diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index aac2cda60e09..102916f1e465 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -43,10 +43,10 @@ #define CM_X300_ETH_PHYS 0x08000010 -#define GPIO82_MMC2_IRQ (82) -#define GPIO85_MMC2_WP (85) +#define GPIO82_MMC_IRQ (82) +#define GPIO85_MMC_WP (85) -#define CM_X300_MMC2_IRQ IRQ_GPIO(GPIO82_MMC2_IRQ) +#define CM_X300_MMC_IRQ IRQ_GPIO(GPIO82_MMC_IRQ) #define GPIO95_RTC_CS (95) #define GPIO96_RTC_WR (96) @@ -292,37 +292,37 @@ static inline void cm_x300_init_nand(void) {} #endif #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE) -/* The first MMC slot of CM-X300 is hardwired to Libertas card and has +static struct pxamci_platform_data cm_x300_mci_platform_data = { + .detect_delay = 20, + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .gpio_card_detect = GPIO82_MMC_IRQ, + .gpio_card_ro = GPIO85_MMC_WP, + .gpio_power = -1, +}; + +/* The second MMC slot of CM-X300 is hardwired to Libertas card and has no detection/ro pins */ -static int cm_x300_mci_init(struct device *dev, - irq_handler_t cm_x300_detect_int, - void *data) +static int cm_x300_mci2_init(struct device *dev, + irq_handler_t cm_x300_detect_int, + void *data) { return 0; } -static void cm_x300_mci_exit(struct device *dev, void *data) +static void cm_x300_mci2_exit(struct device *dev, void *data) { } -static struct pxamci_platform_data cm_x300_mci_platform_data = { +static struct pxamci_platform_data cm_x300_mci2_platform_data = { .detect_delay = 20, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .init = cm_x300_mci_init, - .exit = cm_x300_mci_exit, + .init = cm_x300_mci2_init, + .exit = cm_x300_mci2_exit, .gpio_card_detect = -1, .gpio_card_ro = -1, .gpio_power = -1, }; -static struct pxamci_platform_data cm_x300_mci2_platform_data = { - .detect_delay = 20, - .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .gpio_card_detect = GPIO82_MMC2_IRQ, - .gpio_card_ro = GPIO85_MMC2_WP, - .gpio_power = -1, -}; - static void __init cm_x300_init_mmc(void) { pxa_set_mci_info(&cm_x300_mci_platform_data); diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index ee8d6038ce82..82ff5733e4dc 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -15,6 +15,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/delay.h> +#include <linux/gpio_keys.h> #include <linux/gpio.h> #include <linux/leds.h> #include <linux/mtd/physmap.h> @@ -375,6 +376,43 @@ static struct platform_device spitzkbd_device = { }; +static struct gpio_keys_button spitz_gpio_keys[] = { + { + .type = EV_PWR, + .code = KEY_SUSPEND, + .gpio = SPITZ_GPIO_ON_KEY, + .desc = "On/Off", + .wakeup = 1, + }, + /* Two buttons detecting the lid state */ + { + .type = EV_SW, + .code = 0, + .gpio = SPITZ_GPIO_SWA, + .desc = "Display Down", + }, + { + .type = EV_SW, + .code = 1, + .gpio = SPITZ_GPIO_SWB, + .desc = "Lid Closed", + }, +}; + +static struct gpio_keys_platform_data spitz_gpio_keys_platform_data = { + .buttons = spitz_gpio_keys, + .nbuttons = ARRAY_SIZE(spitz_gpio_keys), +}; + +static struct platform_device spitz_gpio_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &spitz_gpio_keys_platform_data, + }, +}; + + /* * Spitz LEDs */ @@ -689,6 +727,7 @@ static struct platform_device sharpsl_rom_device = { static struct platform_device *devices[] __initdata = { &spitzscoop_device, &spitzkbd_device, + &spitz_gpio_keys_device, &spitzled_device, &sharpsl_nand_device, &sharpsl_rom_device, diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index e993140edd88..9264d814cd7a 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -122,10 +122,7 @@ config CPU_ARM920T select CPU_TLB_V4WBI if MMU help The ARM920T is licensed to be produced by numerous vendors, - and is used in the Maverick EP9312 and the Samsung S3C2410. - - More information on the Maverick EP9312 at - <http://linuxdevices.com/products/PD2382866068.html>. + and is used in the Cirrus EP93xx and the Samsung S3C2410. Say Y if you want support for the ARM920T processor. Otherwise, say N. diff --git a/arch/arm/oprofile/op_model_v6.c b/arch/arm/oprofile/op_model_v6.c index fe581383d3e2..f7d2ec5ee9a1 100644 --- a/arch/arm/oprofile/op_model_v6.c +++ b/arch/arm/oprofile/op_model_v6.c @@ -33,6 +33,9 @@ static int irqs[] = { #ifdef CONFIG_ARCH_OMAP2 3, #endif +#ifdef CONFIG_ARCH_BCMRING + IRQ_PMUIRQ, /* for BCMRING, ARM PMU interrupt is 43 */ +#endif }; static void armv6_pmu_stop(void) diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 0eb676d7e807..b53125f41293 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -978,6 +978,14 @@ void omap_stop_dma(int lch) { u32 l; + /* Disable all interrupts on the channel */ + if (cpu_class_is_omap1()) + dma_write(0, CICR(lch)); + + l = dma_read(CCR(lch)); + l &= ~OMAP_DMA_CCR_EN; + dma_write(l, CCR(lch)); + if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) { int next_lch, cur_lch = lch; char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT]; @@ -995,18 +1003,8 @@ void omap_stop_dma(int lch) next_lch = dma_chan[cur_lch].next_lch; cur_lch = next_lch; } while (next_lch != -1); - - return; } - /* Disable all interrupts on the channel */ - if (cpu_class_is_omap1()) - dma_write(0, CICR(lch)); - - l = dma_read(CCR(lch)); - l &= ~OMAP_DMA_CCR_EN; - dma_write(l, CCR(lch)); - dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE; } EXPORT_SYMBOL(omap_stop_dma); diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/mach/keypad.h index d91b9be334ff..3ae52ccc793c 100644 --- a/arch/arm/plat-omap/include/mach/keypad.h +++ b/arch/arm/plat-omap/include/mach/keypad.h @@ -10,7 +10,7 @@ #ifndef ASMARM_ARCH_KEYPAD_H #define ASMARM_ARCH_KEYPAD_H -#include <linux/input/matrix_keypad.h> +#warning: Please update the board to use matrix_keypad.h instead struct omap_kp_platform_data { int rows; @@ -37,6 +37,9 @@ struct omap_kp_platform_data { #define KEY_PERSISTENT 0x00800000 #define KEYNUM_MASK 0x00EFFFFF +#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val)) +#define PERSISTENT_KEY(col, row) (((col) << 28) | ((row) << 24) | \ + KEY_PERSISTENT) #endif diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c index 4b6012707307..94584f167a82 100644 --- a/arch/arm/plat-omap/iommu.c +++ b/arch/arm/plat-omap/iommu.c @@ -664,7 +664,7 @@ static size_t iopgtable_clear_entry_core(struct iommu *obj, u32 da) nent = 1; /* for the next L1 entry */ } else { bytes = IOPGD_SIZE; - if (*iopgd & IOPGD_SUPER) { + if ((*iopgd & IOPGD_SUPER) == IOPGD_SUPER) { nent *= 16; /* rewind to the 1st entry */ iopgd = (u32 *)((u32)iopgd & IOSUPER_MASK); diff --git a/arch/frv/kernel/signal.c b/arch/frv/kernel/signal.c index 6b0a2b6fed6a..0974c0ecc594 100644 --- a/arch/frv/kernel/signal.c +++ b/arch/frv/kernel/signal.c @@ -527,7 +527,7 @@ static void do_signal(void) no_signal: /* Did we come from a system call? */ - if (__frame->syscallno >= 0) { + if (__frame->syscallno != -1) { /* Restart the system call - no handlers present */ switch (__frame->gr8) { case -ERESTARTNOHAND: diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts index cee8080aa245..dd3860846f15 100644 --- a/arch/powerpc/boot/dts/cm5200.dts +++ b/arch/powerpc/boot/dts/cm5200.dts @@ -210,7 +210,6 @@ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d40 0x40>; interrupts = <2 16 0>; - fsl5200-clocking; }; sram@8000 { diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts index 4c36186ef946..8e9be6bfe23e 100644 --- a/arch/powerpc/boot/dts/digsy_mtc.dts +++ b/arch/powerpc/boot/dts/digsy_mtc.dts @@ -199,7 +199,6 @@ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d00 0x40>; interrupts = <2 15 0>; - fsl5200-clocking; rtc@50 { compatible = "at,24c08"; diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts index de30b3f9eb26..82ff2b13bc37 100644 --- a/arch/powerpc/boot/dts/lite5200.dts +++ b/arch/powerpc/boot/dts/lite5200.dts @@ -247,7 +247,6 @@ compatible = "fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d00 0x40>; interrupts = <2 15 0>; - fsl5200-clocking; }; i2c@3d40 { @@ -256,7 +255,6 @@ compatible = "fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d40 0x40>; interrupts = <2 16 0>; - fsl5200-clocking; }; sram@8000 { compatible = "fsl,mpc5200-sram"; diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts index d13cb11ce623..e45a63be3a86 100644 --- a/arch/powerpc/boot/dts/lite5200b.dts +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -251,7 +251,6 @@ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d00 0x40>; interrupts = <2 15 0>; - fsl5200-clocking; }; i2c@3d40 { @@ -260,7 +259,6 @@ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d40 0x40>; interrupts = <2 16 0>; - fsl5200-clocking; }; sram@8000 { diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts index e297d8b41875..0c3902bc5b6a 100644 --- a/arch/powerpc/boot/dts/media5200.dts +++ b/arch/powerpc/boot/dts/media5200.dts @@ -223,7 +223,6 @@ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d00 0x40>; interrupts = <2 15 0>; - fsl5200-clocking; }; i2c@3d40 { @@ -232,7 +231,6 @@ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d40 0x40>; interrupts = <2 16 0>; - fsl5200-clocking; }; sram@8000 { diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts index 7be8ca038676..6ca4fc144a33 100644 --- a/arch/powerpc/boot/dts/motionpro.dts +++ b/arch/powerpc/boot/dts/motionpro.dts @@ -222,7 +222,6 @@ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d40 0x40>; interrupts = <2 16 0>; - fsl5200-clocking; rtc@68 { compatible = "dallas,ds1339"; diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts index c2b8dbfab79e..c353dac33416 100644 --- a/arch/powerpc/boot/dts/mpc5121ads.dts +++ b/arch/powerpc/boot/dts/mpc5121ads.dts @@ -209,7 +209,6 @@ reg = <0x1700 0x20>; interrupts = <9 0x8>; interrupt-parent = < &ipic >; - fsl5200-clocking; }; i2c@1720 { @@ -220,7 +219,6 @@ reg = <0x1720 0x20>; interrupts = <10 0x8>; interrupt-parent = < &ipic >; - fsl5200-clocking; }; i2c@1740 { @@ -231,7 +229,6 @@ reg = <0x1740 0x20>; interrupts = <11 0x8>; interrupt-parent = < &ipic >; - fsl5200-clocking; }; i2ccontrol@1760 { diff --git a/arch/powerpc/boot/dts/mucmc52.dts b/arch/powerpc/boot/dts/mucmc52.dts new file mode 100644 index 000000000000..b72a7581d798 --- /dev/null +++ b/arch/powerpc/boot/dts/mucmc52.dts @@ -0,0 +1,332 @@ +/* + * Manroland mucmc52 board Device Tree Source + * + * Copyright (C) 2009 DENX Software Engineering GmbH + * Heiko Schocher <hs@denx.de> + * Copyright 2006-2007 Secret Lab Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "manroland,mucmc52"; + compatible = "manroland,mucmc52"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5200@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x04000000>; // 64MB + }; + + soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200b-immr"; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; + bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader + + cdm@200 { + compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; + reg = <0x200 0x38>; + }; + + mpc5200_pic: interrupt-controller@500 { + // 5200 interrupts are encoded into two levels; + interrupt-controller; + #interrupt-cells = <3>; + compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; + reg = <0x500 0x80>; + }; + + gpt0: timer@600 { // GPT 0 in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x600 0x10>; + interrupts = <1 9 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt1: timer@610 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x610 0x10>; + interrupts = <1 10 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt2: timer@620 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x620 0x10>; + interrupts = <1 11 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt3: timer@630 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x630 0x10>; + interrupts = <1 12 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio_simple: gpio@b00 { + compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; + reg = <0xb00 0x40>; + interrupts = <1 7 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio_wkup: gpio@c00 { + compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; + reg = <0xc00 0x40>; + interrupts = <1 8 0 0 3 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + dma-controller@1200 { + compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; + reg = <0x1200 0x80>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; + }; + + xlb@1f00 { + compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; + reg = <0x1f00 0x100>; + }; + + serial@2000 { /* PSC1 in UART mode */ + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2000 0x100>; + interrupts = <2 1 0>; + }; + + serial@2200 { /* PSC2 in UART mode */ + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2200 0x100>; + interrupts = <2 2 0>; + }; + + serial@2c00 { /* PSC6 in UART mode */ + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2c00 0x100>; + interrupts = <2 4 0>; + }; + + ethernet@3000 { + compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; + reg = <0x3000 0x400>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <2 5 0>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + + phy0: ethernet-phy@0 { + compatible = "intel,lxt971"; + reg = <0>; + }; + }; + + ata@3a00 { + compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; + reg = <0x3a00 0x100>; + interrupts = <2 7 0>; + }; + + i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; + hwmon@2c { + compatible = "ad,adm9240"; + reg = <0x2c>; + }; + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + sram@8000 { + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; + reg = <0x8000 0x4000>; + }; + }; + + pci@f0000d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; + reg = <0xf0000d00 0x100>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x10 */ + 0x8000 0 0 1 &mpc5200_pic 0 3 3 + 0x8000 0 0 2 &mpc5200_pic 0 3 3 + 0x8000 0 0 3 &mpc5200_pic 0 2 3 + 0x8000 0 0 4 &mpc5200_pic 0 1 3 + >; + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 10 0>; + bus-range = <0 0>; + ranges = <0x42000000 0 0x60000000 0x60000000 0 0x10000000 + 0x02000000 0 0x90000000 0x90000000 0 0x10000000 + 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>; + }; + + localbus { + compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0 0 0xff800000 0x00800000 + 1 0 0x80000000 0x00800000 + 3 0 0x80000000 0x00800000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x00800000>; + bank-width = <4>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + partition@0 { + label = "DTS"; + reg = <0x0 0x00100000>; + }; + partition@100000 { + label = "Kernel"; + reg = <0x100000 0x00200000>; + }; + partition@300000 { + label = "RootFS"; + reg = <0x00300000 0x00200000>; + }; + partition@500000 { + label = "user"; + reg = <0x00500000 0x00200000>; + }; + partition@700000 { + label = "U-Boot"; + reg = <0x00700000 0x00040000>; + }; + partition@740000 { + label = "Env"; + reg = <0x00740000 0x00020000>; + }; + partition@760000 { + label = "red. Env"; + reg = <0x00760000 0x00020000>; + }; + partition@780000 { + label = "reserve"; + reg = <0x00780000 0x00080000>; + }; + }; + + simple100: gpio-controller-100@3,600100 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600100 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple104: gpio-controller-104@3,600104 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600104 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple200: gpio-controller-200@3,600200 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600200 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple201: gpio-controller-201@3,600201 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600201 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple202: gpio-controller-202@3,600202 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600202 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple203: gpio-controller-203@3,600203 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600203 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple204: gpio-controller-204@3,600204 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600204 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple206: gpio-controller-206@3,600206 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600206 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple207: gpio-controller-207@3,600207 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600207 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple20f: gpio-controller-20f@3,60020f { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x0060020f 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + + }; +}; diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts index 30bfdc04c6df..8a4ec30b21ae 100644 --- a/arch/powerpc/boot/dts/pcm030.dts +++ b/arch/powerpc/boot/dts/pcm030.dts @@ -244,7 +244,6 @@ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d00 0x40>; interrupts = <2 15 0>; - fsl5200-clocking; }; i2c@3d40 { @@ -253,7 +252,6 @@ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d40 0x40>; interrupts = <2 16 0>; - fsl5200-clocking; rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts index 030042678392..85d857a5d46e 100644 --- a/arch/powerpc/boot/dts/pcm032.dts +++ b/arch/powerpc/boot/dts/pcm032.dts @@ -244,7 +244,6 @@ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d00 0x40>; interrupts = <2 15 0>; - fsl5200-clocking; }; i2c@3d40 { @@ -253,7 +252,6 @@ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d40 0x40>; interrupts = <2 16 0>; - fsl5200-clocking; rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts index c9590b58b7b0..1db07f6cf133 100644 --- a/arch/powerpc/boot/dts/tqm5200.dts +++ b/arch/powerpc/boot/dts/tqm5200.dts @@ -160,7 +160,6 @@ compatible = "fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d40 0x40>; interrupts = <2 16 0>; - fsl5200-clocking; rtc@68 { compatible = "dallas,ds1307"; diff --git a/arch/powerpc/boot/dts/uc101.dts b/arch/powerpc/boot/dts/uc101.dts new file mode 100644 index 000000000000..019264c62904 --- /dev/null +++ b/arch/powerpc/boot/dts/uc101.dts @@ -0,0 +1,284 @@ +/* + * Manroland uc101 board Device Tree Source + * + * Copyright (C) 2009 DENX Software Engineering GmbH + * Heiko Schocher <hs@denx.de> + * Copyright 2006-2007 Secret Lab Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "manroland,uc101"; + compatible = "manroland,uc101"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5200@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x04000000>; // 64MB + }; + + soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200b-immr"; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; + bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader + + cdm@200 { + compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; + reg = <0x200 0x38>; + }; + + mpc5200_pic: interrupt-controller@500 { + // 5200 interrupts are encoded into two levels; + interrupt-controller; + #interrupt-cells = <3>; + compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; + reg = <0x500 0x80>; + }; + + gpt0: timer@600 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x600 0x10>; + interrupts = <1 9 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt1: timer@610 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x610 0x10>; + interrupts = <1 10 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt2: timer@620 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x620 0x10>; + interrupts = <1 11 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt3: timer@630 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x630 0x10>; + interrupts = <1 12 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt4: timer@640 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x640 0x10>; + interrupts = <1 13 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt5: timer@650 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x650 0x10>; + interrupts = <1 14 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt6: timer@660 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x660 0x10>; + interrupts = <1 15 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt7: timer@670 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x670 0x10>; + interrupts = <1 16 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio_simple: gpio@b00 { + compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; + reg = <0xb00 0x40>; + interrupts = <1 7 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio_wkup: gpio@c00 { + compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; + reg = <0xc00 0x40>; + interrupts = <1 8 0 0 3 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + dma-controller@1200 { + compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; + reg = <0x1200 0x80>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; + }; + + xlb@1f00 { + compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; + reg = <0x1f00 0x100>; + }; + + serial@2000 { /* PSC1 in UART mode */ + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2000 0x100>; + interrupts = <2 1 0>; + }; + + serial@2200 { /* PSC2 in UART mode */ + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2200 0x100>; + interrupts = <2 2 0>; + }; + + serial@2c00 { /* PSC6 in UART mode */ + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2c00 0x100>; + interrupts = <2 4 0>; + }; + + ethernet@3000 { + compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; + reg = <0x3000 0x400>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <2 5 0>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + + phy0: ethernet-phy@0 { + compatible = "intel,lxt971"; + reg = <0>; + }; + }; + + ata@3a00 { + compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; + reg = <0x3a00 0x100>; + interrupts = <2 7 0>; + }; + + i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; + fsl,preserve-clocking; + clock-frequency = <400000>; + + hwmon@2c { + compatible = "ad,adm9240"; + reg = <0x2c>; + }; + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + sram@8000 { + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; + reg = <0x8000 0x4000>; + }; + }; + + localbus { + compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0 0 0xff800000 0x00800000 + 1 0 0x80000000 0x00800000 + 3 0 0x80000000 0x00800000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x00800000>; + bank-width = <2>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + + partition@0 { + label = "DTS"; + reg = <0x0 0x00100000>; + }; + partition@100000 { + label = "Kernel"; + reg = <0x100000 0x00200000>; + }; + partition@300000 { + label = "RootFS"; + reg = <0x00300000 0x00200000>; + }; + partition@500000 { + label = "user"; + reg = <0x00500000 0x00200000>; + }; + partition@700000 { + label = "U-Boot"; + reg = <0x00700000 0x00040000>; + }; + partition@740000 { + label = "Env"; + reg = <0x00740000 0x00010000>; + }; + partition@750000 { + label = "red. Env"; + reg = <0x00750000 0x00010000>; + }; + partition@760000 { + label = "reserve"; + reg = <0x00760000 0x000a0000>; + }; + }; + + }; +}; diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig index 3838b77b8116..0396ce7bffc6 100644 --- a/arch/powerpc/configs/52xx/cm5200_defconfig +++ b/arch/powerpc/configs/52xx/cm5200_defconfig @@ -1,25 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc2 -# Sat Apr 18 00:47:44 2009 +# Linux kernel version: 2.6.32-rc4 +# Thu Oct 15 10:33:22 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -30,15 +32,17 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -52,11 +56,13 @@ CONFIG_OF=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -77,11 +83,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -105,7 +112,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -118,6 +124,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y CONFIG_COMPAT_BRK=y @@ -125,14 +138,19 @@ CONFIG_COMPAT_BRK=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -140,7 +158,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -219,11 +237,13 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -239,9 +259,10 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -252,6 +273,7 @@ CONFIG_PROC_DEVICETREE=y CONFIG_EXTRA_TARGETS="" CONFIG_PM=y # CONFIG_PM_DEBUG is not set +# CONFIG_PM_RUNTIME is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -328,6 +350,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -342,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -367,6 +391,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -457,6 +482,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -495,10 +521,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -519,7 +541,6 @@ CONFIG_CHR_DEV_SG=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -558,14 +579,14 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set CONFIG_FEC_MPC52xx=y CONFIG_FEC_MPC52xx_MDIO=y +# CONFIG_XILINX_EMACLITE is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -636,6 +657,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -646,6 +668,7 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_DESIGNWARE is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set @@ -666,23 +689,23 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -713,25 +736,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -775,11 +785,12 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_SOC=y -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_OHCI_LITTLE_ENDIAN is not set @@ -866,6 +877,10 @@ CONFIG_USB_STORAGE=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -885,10 +900,13 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -959,12 +977,12 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1064,6 +1082,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1073,6 +1092,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1090,10 +1110,14 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1105,11 +1129,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1118,23 +1143,25 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set @@ -1159,7 +1186,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1200,11 +1226,13 @@ CONFIG_CRYPTO_PCBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig index 29b0f34488f5..f5c07fd72239 100644 --- a/arch/powerpc/configs/52xx/lite5200b_defconfig +++ b/arch/powerpc/configs/52xx/lite5200b_defconfig @@ -1,25 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc2 -# Sat Apr 18 00:48:04 2009 +# Linux kernel version: 2.6.32-rc4 +# Thu Oct 15 10:33:24 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -30,15 +32,17 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -52,12 +56,14 @@ CONFIG_OF=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -78,11 +84,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -106,7 +113,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -119,6 +125,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y @@ -127,14 +140,19 @@ CONFIG_COMPAT_BRK=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -147,7 +165,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -228,11 +246,13 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -248,9 +268,10 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -264,6 +285,7 @@ CONFIG_PM=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y +# CONFIG_PM_RUNTIME is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -348,6 +370,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -362,6 +385,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -387,6 +411,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -397,6 +422,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_MTD is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -431,7 +457,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -454,10 +482,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -475,6 +499,8 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -483,6 +509,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -502,7 +529,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -514,11 +540,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -540,6 +569,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -568,6 +598,7 @@ CONFIG_PATA_MPC52xx=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -586,14 +617,17 @@ CONFIG_PATA_MPC52xx=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -640,9 +674,12 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set CONFIG_FEC_MPC52xx=y CONFIG_FEC_MPC52xx_MDIO=y # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -661,6 +698,8 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -686,10 +725,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -759,6 +795,7 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -787,6 +824,7 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_DESIGNWARE is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set @@ -812,23 +850,23 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -847,30 +885,18 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -913,6 +939,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -932,10 +962,13 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -992,12 +1025,12 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1041,6 +1074,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1050,6 +1084,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1067,10 +1102,14 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1082,11 +1121,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1095,23 +1135,25 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set @@ -1136,7 +1178,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1178,11 +1219,13 @@ CONFIG_CRYPTO_CBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig index 07b6b266ea95..4f77a1bdc8f9 100644 --- a/arch/powerpc/configs/52xx/motionpro_defconfig +++ b/arch/powerpc/configs/52xx/motionpro_defconfig @@ -1,25 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc2 -# Sat Apr 18 00:48:22 2009 +# Linux kernel version: 2.6.32-rc4 +# Thu Oct 15 10:33:22 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -30,15 +32,17 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -52,11 +56,13 @@ CONFIG_OF=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -77,11 +83,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -105,7 +112,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -118,6 +124,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y CONFIG_COMPAT_BRK=y @@ -125,14 +138,19 @@ CONFIG_COMPAT_BRK=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -140,7 +158,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -220,11 +238,13 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -240,9 +260,10 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -253,6 +274,7 @@ CONFIG_PROC_DEVICETREE=y CONFIG_EXTRA_TARGETS="" CONFIG_PM=y # CONFIG_PM_DEBUG is not set +# CONFIG_PM_RUNTIME is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -329,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -343,6 +366,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -368,6 +392,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -458,6 +483,7 @@ CONFIG_MTD_ROM=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -483,6 +509,7 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -506,10 +533,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -532,6 +555,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y CONFIG_ATA_SFF=y # CONFIG_SATA_MV is not set @@ -540,7 +564,6 @@ CONFIG_PATA_MPC52xx=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -579,14 +602,14 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set CONFIG_FEC_MPC52xx=y CONFIG_FEC_MPC52xx_MDIO=y +# CONFIG_XILINX_EMACLITE is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -647,6 +670,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -657,6 +681,7 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_DESIGNWARE is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set @@ -676,22 +701,28 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -738,6 +769,8 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set @@ -747,9 +780,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -775,25 +806,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -817,7 +835,7 @@ CONFIG_LEDS_CLASS=y # # LED drivers # -# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_LP3944 is not set # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_BD2802 is not set @@ -866,6 +884,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -893,6 +912,10 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -912,10 +935,13 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -986,12 +1012,12 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1091,6 +1117,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1100,6 +1127,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1117,10 +1145,14 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1132,11 +1164,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1145,23 +1178,25 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set @@ -1186,7 +1221,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1227,11 +1261,13 @@ CONFIG_CRYPTO_PCBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig index afb1a3d1ef0a..f9168c1a2fa5 100644 --- a/arch/powerpc/configs/52xx/pcm030_defconfig +++ b/arch/powerpc/configs/52xx/pcm030_defconfig @@ -1,25 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc2 -# Sat Apr 18 00:48:42 2009 +# Linux kernel version: 2.6.32-rc4 +# Thu Oct 15 10:33:25 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -30,15 +32,17 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -52,11 +56,13 @@ CONFIG_OF=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -79,11 +85,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -105,7 +112,6 @@ CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -118,6 +124,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_PCI_QUIRKS=y CONFIG_COMPAT_BRK=y @@ -125,7 +138,6 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -133,7 +145,13 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -146,7 +164,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -227,11 +245,13 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -247,9 +267,10 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -336,6 +357,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -350,6 +372,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -375,6 +398,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -382,9 +406,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set @@ -467,6 +491,7 @@ CONFIG_MTD_PHYSMAP=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set # CONFIG_BLK_DEV is not set # CONFIG_MISC_DEVICES is not set @@ -492,10 +517,6 @@ CONFIG_BLK_DEV_SD=m # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -515,6 +536,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=m # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -536,6 +558,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -564,6 +587,7 @@ CONFIG_PATA_MPC52xx=m # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -582,14 +606,17 @@ CONFIG_PATA_MPC52xx=m # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -636,16 +663,16 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set CONFIG_FEC_MPC52xx=y CONFIG_FEC_MPC52xx_MDIO=y # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -722,6 +749,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -750,6 +778,7 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_DESIGNWARE is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set @@ -776,23 +805,23 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -811,30 +840,18 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -871,15 +888,17 @@ CONFIG_USB_DEVICEFS=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_HCD_PPC_SOC is not set -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +CONFIG_USB_OHCI_HCD_PPC_OF=y # CONFIG_USB_OHCI_HCD_PCI is not set CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -995,6 +1014,7 @@ CONFIG_RTC_DRV_PCF8563=m # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1022,6 +1042,10 @@ CONFIG_RTC_DRV_PCF8563=m # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1041,12 +1065,16 @@ CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -1114,7 +1142,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1201,6 +1228,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1210,6 +1238,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1223,23 +1252,12 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig index 8585c7c12861..75c835c2ae66 100644 --- a/arch/powerpc/configs/52xx/tqm5200_defconfig +++ b/arch/powerpc/configs/52xx/tqm5200_defconfig @@ -1,25 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc2 -# Sat Apr 18 00:48:57 2009 +# Linux kernel version: 2.6.32-rc4 +# Thu Oct 15 10:33:23 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -30,15 +32,17 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -52,11 +56,13 @@ CONFIG_OF=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -77,11 +83,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -105,7 +112,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -118,6 +124,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y CONFIG_COMPAT_BRK=y @@ -125,14 +138,19 @@ CONFIG_COMPAT_BRK=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -145,7 +163,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -225,11 +243,13 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -245,9 +265,10 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -258,6 +279,7 @@ CONFIG_PROC_DEVICETREE=y CONFIG_EXTRA_TARGETS="" CONFIG_PM=y # CONFIG_PM_DEBUG is not set +# CONFIG_PM_RUNTIME is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -334,6 +356,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -348,6 +371,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -373,6 +397,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -382,9 +407,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set @@ -464,6 +489,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -502,10 +528,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -529,6 +551,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y CONFIG_ATA_SFF=y # CONFIG_SATA_MV is not set @@ -538,7 +561,6 @@ CONFIG_PATA_PLATFORM=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -577,14 +599,14 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set CONFIG_FEC_MPC52xx=y CONFIG_FEC_MPC52xx_MDIO=y +# CONFIG_XILINX_EMACLITE is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -654,6 +676,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -664,6 +687,7 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_DESIGNWARE is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set @@ -685,22 +709,28 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -747,6 +777,8 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set @@ -756,9 +788,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -789,25 +819,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -851,11 +868,12 @@ CONFIG_USB_MON=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_SOC=y -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_OHCI_LITTLE_ENDIAN is not set @@ -969,6 +987,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -996,6 +1015,10 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1015,10 +1038,13 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1089,12 +1115,12 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1194,6 +1220,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1203,6 +1230,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1220,10 +1248,14 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1235,11 +1267,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1248,23 +1281,25 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set @@ -1289,7 +1324,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1331,11 +1365,13 @@ CONFIG_CRYPTO_PCBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig index aaa4416660e9..523d5fe18c0e 100644 --- a/arch/powerpc/configs/mpc5200_defconfig +++ b/arch/powerpc/configs/mpc5200_defconfig @@ -1,25 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc2 -# Mon Apr 20 11:06:25 2009 +# Linux kernel version: 2.6.32-rc4 +# Thu Oct 15 10:33:21 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -30,15 +32,17 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -53,12 +57,14 @@ CONFIG_OF=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -79,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -103,7 +110,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -116,6 +122,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y @@ -124,14 +137,19 @@ CONFIG_COMPAT_BRK=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -144,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -205,7 +223,7 @@ CONFIG_RTAS_PROC=y CONFIG_PPC_BESTCOMM=y CONFIG_PPC_BESTCOMM_ATA=y CONFIG_PPC_BESTCOMM_FEC=y -# CONFIG_SIMPLE_GPIO is not set +CONFIG_SIMPLE_GPIO=y # # Kernel options @@ -229,11 +247,13 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -249,9 +269,10 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -265,6 +286,7 @@ CONFIG_PM=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y +# CONFIG_PM_RUNTIME is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -349,6 +371,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -363,6 +386,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -388,6 +412,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -397,9 +422,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -458,6 +483,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_PMC551 is not set # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -493,6 +519,7 @@ CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y CONFIG_OF_SPI=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -529,7 +556,9 @@ CONFIG_MISC_DEVICES=y CONFIG_EEPROM_AT24=y # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -552,10 +581,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -572,6 +597,8 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -580,6 +607,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -599,7 +627,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -611,11 +638,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -637,6 +667,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -665,6 +696,7 @@ CONFIG_PATA_MPC52xx=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -684,14 +716,17 @@ CONFIG_PATA_PLATFORM=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -739,16 +774,17 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set CONFIG_FEC_MPC52xx=y CONFIG_FEC_MPC52xx_MDIO=y # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -854,6 +890,7 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y @@ -883,6 +920,7 @@ CONFIG_I2C_ALGOBIT=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set @@ -910,10 +948,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -935,6 +969,11 @@ CONFIG_SPI_MPC52xx_PSC=m # CONFIG_SPI_SPIDEV=m # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -957,16 +996,27 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # # CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADCXX is not set @@ -1019,6 +1069,8 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1031,9 +1083,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_LIS3_SPI is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1073,31 +1123,20 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y CONFIG_DRM=y # CONFIG_DRM_TDFX is not set # CONFIG_DRM_R128 is not set @@ -1167,6 +1206,7 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_BROADSHEET is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_LMS283GF05 is not set # CONFIG_LCD_LTV350QV is not set # CONFIG_LCD_ILI9320 is not set # CONFIG_LCD_TDO24M is not set @@ -1198,7 +1238,6 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1217,10 +1256,11 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y # CONFIG_HID_CHICONY is not set CONFIG_HID_CYPRESS=y -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set # CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set # CONFIG_HID_LOGITECH is not set # CONFIG_HID_MICROSOFT is not set @@ -1231,10 +1271,11 @@ CONFIG_HID_EZKEY=y # CONFIG_HID_SAMSUNG is not set # CONFIG_HID_SONY is not set # CONFIG_HID_SUNPLUS is not set -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -# CONFIG_THRUSTMASTER_FF is not set -# CONFIG_ZEROPLUS_FF is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1261,15 +1302,17 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_SOC=y -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PCI=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -1400,6 +1443,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1411,6 +1455,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -1434,6 +1479,10 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1453,10 +1502,13 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1533,12 +1585,12 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1624,6 +1676,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1633,6 +1686,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1650,10 +1704,14 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1665,11 +1723,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1678,23 +1737,25 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set @@ -1719,7 +1780,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1761,11 +1821,13 @@ CONFIG_CRYPTO_CBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/ppc64e_defconfig b/arch/powerpc/configs/ppc64e_defconfig new file mode 100644 index 000000000000..18af46036258 --- /dev/null +++ b/arch/powerpc/configs/ppc64e_defconfig @@ -0,0 +1,2199 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32-rc5 +# Fri Oct 16 11:37:15 2009 +# +CONFIG_PPC64=y + +# +# Processor support +# +# CONFIG_PPC_BOOK3S_64 is not set +CONFIG_PPC_BOOK3E_64=y +CONFIG_PPC_BOOK3E=y +CONFIG_PPC_FPU=y +CONFIG_BOOKE=y +CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_64=y +CONFIG_PPC_BOOK3E_MMU=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_VIRT_CPU_ACCOUNTING=y +CONFIG_PPC_HAVE_PMU_SUPPORT=y +CONFIG_PPC_PERF_CTRS=y +CONFIG_SMP=y +CONFIG_NR_CPUS=32 +CONFIG_64BIT=y +CONFIG_WORD_SIZE=64 +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y +CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y +CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_ARCH_HAS_ILOG2_U64=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +# CONFIG_PPC_UDBG_16550 is not set +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DTC=y +# CONFIG_DEFAULT_UIMAGE is not set +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +# CONFIG_PPC_OF_PLATFORM_PCI is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +# CONFIG_TASK_XACCT is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=64 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +# CONFIG_CGROUP_NS is not set +# CONFIG_CGROUP_FREEZER is not set +# CONFIG_CGROUP_DEVICE is not set +CONFIG_CPUSETS=y +CONFIG_PROC_PID_CPUSET=y +# CONFIG_CGROUP_CPUACCT is not set +# CONFIG_RESOURCE_COUNTERS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +CONFIG_PERF_EVENTS=y +CONFIG_EVENT_PROFILE=y +# CONFIG_PERF_COUNTERS is not set +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_COMPAT_BRK is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_SYSCALL_WRAPPERS=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_SLOW_WORK=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_STOP_MACHINE=y +CONFIG_BLOCK=y +CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set +CONFIG_BLOCK_COMPAT=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set + +# +# Platform support +# +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y +# CONFIG_IPIC is not set +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_U3_DART is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set + +# +# CPU Frequency drivers +# +# CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set + +# +# Kernel options +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +CONFIG_COMPAT_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +CONFIG_BINFMT_MISC=m +CONFIG_IOMMU_VMERGE=y +CONFIG_IOMMU_HELPER=y +# CONFIG_SWIOTLB is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_CRASH_DUMP is not set +CONFIG_IRQ_ALL_CPUS=y +# CONFIG_NUMA is not set +CONFIG_MAX_ACTIVE_REGIONS=256 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +CONFIG_SPARSEMEM_VMEMMAP=y +# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +# CONFIG_PPC_HAS_HASH_64K is not set +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set +CONFIG_FORCE_MAX_ZONEORDER=13 +# CONFIG_SCHED_SMT is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_PPC_INDIRECT_PCI is not set +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +CONFIG_PCI_MSI=y +# CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +# CONFIG_YENTA is not set +# CONFIG_PD6729 is not set +# CONFIG_I82092 is not set +CONFIG_HOTPLUG_PCI=m +# CONFIG_HOTPLUG_PCI_FAKE is not set +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set +# CONFIG_HAS_RAPIDIO is not set +# CONFIG_RELOCATABLE is not set +CONFIG_PAGE_OFFSET=0xc000000000000000 +CONFIG_KERNEL_START=0xc000000000000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_NET=y +CONFIG_COMPAT_NETLINK_MESSAGES=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m +CONFIG_NET_KEY=m +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +CONFIG_NET_IPIP=y +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=y +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_LRO=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +# CONFIG_NF_CT_PROTO_DCCP is not set +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +# CONFIG_NF_CT_PROTO_UDPLITE is not set +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +# CONFIG_NF_CONNTRACK_SANE is not set +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NETFILTER_TPROXY=m +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +CONFIG_NETFILTER_XT_MATCH_U32=m +# CONFIG_NETFILTER_XT_MATCH_OSF is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PROTO_SCTP=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 +CONFIG_WIRELESS_OLD_REGULATORY=y +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +CONFIG_BLK_DEV_FD=y +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set +CONFIG_HAVE_IDE=y +CONFIG_IDE=y + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +CONFIG_IDE_XFER_MODE=y +CONFIG_IDE_TIMINGS=y +CONFIG_IDE_ATAPI=y +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +# CONFIG_BLK_DEV_IDECS is not set +# CONFIG_BLK_DEV_DELKIN is not set +CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y + +# +# PCI IDE chipsets support +# +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_PCIBUS_ORDER=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +CONFIG_BLK_DEV_AMD74XX=y +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SL82C105 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set +CONFIG_BLK_DEV_IDEDMA=y + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +CONFIG_SCSI_NETLINK=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=y +CONFIG_SCSI_FC_ATTRS=y +CONFIG_SCSI_ISCSI_ATTRS=m +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +CONFIG_SCSI_SRP_ATTRS=y +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_FCOE is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 +CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 +CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 +CONFIG_SCSI_SYM53C8XX_MMIO=y +CONFIG_SCSI_IPR=y +CONFIG_SCSI_IPR_TRACE=y +CONFIG_SCSI_IPR_DUMP=y +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +CONFIG_SCSI_LPFC=m +# CONFIG_SCSI_LPFC_DEBUG_FS is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +CONFIG_SCSI_DEBUG=m +# CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y +CONFIG_SATA_PMP=y +# CONFIG_SATA_AHCI is not set +CONFIG_SATA_SIL24=y +CONFIG_ATA_SFF=y +CONFIG_SATA_SVW=y +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PCMCIA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +CONFIG_MD_RAID10=y +CONFIG_MD_RAID456=y +# CONFIG_MULTICORE_RAID456 is not set +CONFIG_MD_RAID6_PQ=y +# CONFIG_ASYNC_RAID6_TEST is not set +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=y +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +# CONFIG_DM_LOG_USERSPACE is not set +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +# CONFIG_DM_MULTIPATH_QL is not set +# CONFIG_DM_MULTIPATH_ST is not set +# CONFIG_DM_DELAY is not set +# CONFIG_DM_UEVENT is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. +# +# CONFIG_FIREWIRE is not set +CONFIG_IEEE1394=y +CONFIG_IEEE1394_OHCI1394=y +# CONFIG_IEEE1394_PCILYNX is not set +CONFIG_IEEE1394_SBP2=m +CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y +CONFIG_IEEE1394_ETH1394=m +CONFIG_IEEE1394_RAWIO=y +CONFIG_IEEE1394_VIDEO1394=m +CONFIG_IEEE1394_DV1394=m +# CONFIG_IEEE1394_VERBOSEDEBUG is not set +# CONFIG_I2O is not set +CONFIG_MACINTOSH_DRIVERS=y +# CONFIG_MAC_EMUMOUSEBTN is not set +CONFIG_WINDFARM=y +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +CONFIG_BONDING=m +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +CONFIG_BROADCOM_PHY=m +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +CONFIG_SUNGEM=y +# CONFIG_CASSINI is not set +CONFIG_NET_VENDOR_3COM=y +CONFIG_VORTEX=y +# CONFIG_TYPHOON is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +CONFIG_NET_PCI=y +CONFIG_PCNET32=y +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_R6040 is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set +CONFIG_NETDEV_1000=y +CONFIG_ACENIC=y +CONFIG_ACENIC_OMIT_TIGON_I=y +# CONFIG_DL2K is not set +CONFIG_E1000=y +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_IGBVF is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +CONFIG_TIGON3=y +# CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y +# CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set +# CONFIG_IXGBE is not set +CONFIG_IXGB=m +# CONFIG_S2IO is not set +# CONFIG_VXGE is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_QLGE is not set +# CONFIG_SFC is not set +# CONFIG_BE2NET is not set +CONFIG_TR=y +CONFIG_IBMOL=y +# CONFIG_3C359 is not set +# CONFIG_TMS380TR is not set +CONFIG_WLAN=y +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_NET_PCMCIA is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +CONFIG_PPPOE=m +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NET_FC is not set +CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set +CONFIG_NETPOLL=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_QT2160 is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +# CONFIG_INPUT_UINPUT is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_OF_PLATFORM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=y + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +CONFIG_I2C_AMD8111=y +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_AGP is not set +CONFIG_VGA_ARB=y +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +CONFIG_FB_DDC=y +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +CONFIG_FB_MACMODES=y +CONFIG_FB_BACKLIGHT=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +CONFIG_FB_OF=y +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +CONFIG_FB_MATROX=y +CONFIG_FB_MATROX_MILLENIUM=y +CONFIG_FB_MATROX_MYSTIQUE=y +CONFIG_FB_MATROX_G=y +CONFIG_FB_MATROX_I2C=m +CONFIG_FB_MATROX_MAVEN=m +CONFIG_FB_RADEON=y +CONFIG_FB_RADEON_I2C=y +CONFIG_FB_RADEON_BACKLIGHT=y +# CONFIG_FB_RADEON_DEBUG is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +CONFIG_FB_IBM_GXT4500=y +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_PCI=y +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS5530 is not set +# CONFIG_SND_CTXFI is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LX6464ES is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set +CONFIG_SND_PPC=y +CONFIG_SND_USB=y +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_USX2Y is not set +# CONFIG_SND_USB_CAIAQ is not set +CONFIG_SND_PCMCIA=y +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_PDAUDIOCF is not set +# CONFIG_SND_SOC is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +CONFIG_USB_HIDDEV=y + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DRAGONRISE=y +# CONFIG_DRAGONRISE_FF is not set +CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y +CONFIG_HID_GYRATION=y +CONFIG_HID_TWINHAN=y +CONFIG_HID_KENSINGTON=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_NTRIG=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_HID_GREENASIA=y +# CONFIG_GREENASIA_FF is not set +CONFIG_HID_SMARTJOYPLUS=y +# CONFIG_SMARTJOYPLUS_FF is not set +CONFIG_HID_TOPSEED=y +CONFIG_HID_THRUSTMASTER=y +# CONFIG_THRUSTMASTER_FF is not set +CONFIG_HID_ZEROPLUS=y +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_EHCI_HCD_PPC_OF is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set +# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +# CONFIG_USB_OHCI_HCD_PPC_OF is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +CONFIG_USB_APPLEDISPLAY=m +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_INFINIBAND=m +# CONFIG_INFINIBAND_USER_MAD is not set +# CONFIG_INFINIBAND_USER_ACCESS is not set +CONFIG_INFINIBAND_ADDR_TRANS=y +CONFIG_INFINIBAND_MTHCA=m +CONFIG_INFINIBAND_MTHCA_DEBUG=y +# CONFIG_INFINIBAND_IPATH is not set +# CONFIG_INFINIBAND_AMSO1100 is not set +# CONFIG_MLX4_INFINIBAND is not set +# CONFIG_INFINIBAND_NES is not set +CONFIG_INFINIBAND_IPOIB=m +# CONFIG_INFINIBAND_IPOIB_CM is not set +CONFIG_INFINIBAND_IPOIB_DEBUG=y +# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set +# CONFIG_INFINIBAND_SRP is not set +CONFIG_INFINIBAND_ISER=m +CONFIG_EDAC=y + +# +# Reporting subsystems +# +# CONFIG_EDAC_DEBUG is not set +CONFIG_EDAC_MM_EDAC=y +# CONFIG_EDAC_CPC925 is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +CONFIG_RTC_DRV_DS1307=y +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_GENERIC is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT2_FS_XIP=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_XATTR=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +# CONFIG_EXT4_DEBUG is not set +CONFIG_FS_XIP=y +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=y +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +CONFIG_JFS_FS=y +CONFIG_JFS_POSIX_ACL=y +CONFIG_JFS_SECURITY=y +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +# CONFIG_JOLIET is not set +# CONFIG_ZISOFS is not set +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set +CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_SUNRPC_XPRT_RDMA=m +CONFIG_RPCSEC_GSS_KRB5=y +CONFIG_RPCSEC_GSS_SPKM3=m +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set +CONFIG_BINARY_PRINTF=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=m +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=2048 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +CONFIG_SCHEDSTATS=y +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +CONFIG_TRACE_IRQFLAGS=y +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +CONFIG_LATENCYTOP=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACER_MAX_TRACE=y +CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y +CONFIG_TRACING=y +CONFIG_GENERIC_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +CONFIG_IRQSOFF_TRACER=y +CONFIG_SCHED_TRACER=y +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +CONFIG_BLK_DEV_IO_TRACE=y +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_RING_BUFFER_BENCHMARK is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y +CONFIG_PRINT_STACK_DEPTH=64 +CONFIG_DEBUG_STACKOVERFLOW=y +CONFIG_DEBUG_STACK_USAGE=y +# CONFIG_PPC_EMULATED_STATS is not set +CONFIG_CODE_PATCHING_SELFTEST=y +CONFIG_FTR_FIXUP_SELFTEST=y +CONFIG_MSI_BITMAP_SELFTEST=y +CONFIG_XMON=y +# CONFIG_XMON_DEFAULT is not set +CONFIG_XMON_DISASSEMBLY=y +CONFIG_DEBUGGER=y +CONFIG_IRQSTACKS=y +# CONFIG_VIRQ_DEBUG is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_XOR_BLOCKS=y +CONFIG_ASYNC_CORE=y +CONFIG_ASYNC_MEMCPY=y +CONFIG_ASYNC_XOR=y +CONFIG_ASYNC_PQ=y +CONFIG_ASYNC_RAID6_RECOV=y +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_SEQIV=m + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_CTR=m +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_GHASH=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +# CONFIG_CRYPTO_CAMELLIA is not set +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=m + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index f9fd54bfcc84..9763267e38b4 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -658,42 +658,43 @@ do_work: cmpdi r0,0 crandc eq,cr1*4+eq,eq bne restore - /* here we are preempting the current task */ -1: -#ifdef CONFIG_TRACE_IRQFLAGS - bl .trace_hardirqs_on - /* Note: we just clobbered r10 which used to contain the previous - * MSR before the hard-disabling done by the caller of do_work. - * We don't have that value anymore, but it doesn't matter as - * we will hard-enable unconditionally, we can just reload the - * current MSR into r10 + + /* Here we are preempting the current task. + * + * Ensure interrupts are soft-disabled. We also properly mark + * the PACA to reflect the fact that they are hard-disabled + * and trace the change */ - mfmsr r10 -#endif /* CONFIG_TRACE_IRQFLAGS */ - li r0,1 + li r0,0 stb r0,PACASOFTIRQEN(r13) stb r0,PACAHARDIRQEN(r13) + TRACE_DISABLE_INTS + + /* Call the scheduler with soft IRQs off */ +1: bl .preempt_schedule_irq + + /* Hard-disable interrupts again (and update PACA) */ #ifdef CONFIG_PPC_BOOK3E - wrteei 1 - bl .preempt_schedule wrteei 0 #else - ori r10,r10,MSR_EE - mtmsrd r10,1 /* reenable interrupts */ - bl .preempt_schedule mfmsr r10 - clrrdi r9,r1,THREAD_SHIFT - rldicl r10,r10,48,1 /* disable interrupts again */ + rldicl r10,r10,48,1 rotldi r10,r10,16 mtmsrd r10,1 #endif /* CONFIG_PPC_BOOK3E */ + li r0,0 + stb r0,PACAHARDIRQEN(r13) + + /* Re-test flags and eventually loop */ + clrrdi r9,r1,THREAD_SHIFT ld r4,TI_FLAGS(r9) andi. r0,r4,_TIF_NEED_RESCHED bne 1b b restore user_work: -#endif +#endif /* CONFIG_PREEMPT */ + /* Enable interrupts */ #ifdef CONFIG_PPC_BOOK3E wrteei 1 diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index ba949a2c93ac..ccf56ac92de5 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -97,7 +97,9 @@ int pcibios_unmap_io_space(struct pci_bus *bus) * to do an appropriate TLB flush here too */ if (bus->self) { +#ifdef CONFIG_PPC_STD_MMU_64 struct resource *res = bus->resource[0]; +#endif pr_debug("IO unmapping for PCI-PCI bridge %s\n", pci_name(bus->self)); diff --git a/arch/powerpc/kernel/perf_event.c b/arch/powerpc/kernel/perf_event.c index bbcbae183e92..87f1663584b0 100644 --- a/arch/powerpc/kernel/perf_event.c +++ b/arch/powerpc/kernel/perf_event.c @@ -116,20 +116,23 @@ static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp) static inline u32 perf_get_misc_flags(struct pt_regs *regs) { unsigned long mmcra = regs->dsisr; + unsigned long sihv = MMCRA_SIHV; + unsigned long sipr = MMCRA_SIPR; if (TRAP(regs) != 0xf00) return 0; /* not a PMU interrupt */ if (ppmu->flags & PPMU_ALT_SIPR) { - if (mmcra & POWER6_MMCRA_SIHV) - return PERF_RECORD_MISC_HYPERVISOR; - return (mmcra & POWER6_MMCRA_SIPR) ? - PERF_RECORD_MISC_USER : PERF_RECORD_MISC_KERNEL; + sihv = POWER6_MMCRA_SIHV; + sipr = POWER6_MMCRA_SIPR; } - if (mmcra & MMCRA_SIHV) + + /* PR has priority over HV, so order below is important */ + if (mmcra & sipr) + return PERF_RECORD_MISC_USER; + if ((mmcra & sihv) && (freeze_events_kernel != MMCR0_FCHV)) return PERF_RECORD_MISC_HYPERVISOR; - return (mmcra & MMCRA_SIPR) ? PERF_RECORD_MISC_USER : - PERF_RECORD_MISC_KERNEL; + return PERF_RECORD_MISC_KERNEL; } /* diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 2ec1eaed19ca..c930ac38e59f 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -1172,7 +1172,7 @@ unsigned long arch_randomize_brk(struct mm_struct *mm) unsigned long base = mm->brk; unsigned long ret; -#ifdef CONFIG_PPC64 +#ifdef CONFIG_PPC_STD_MMU_64 /* * If we are using 1TB segments and we are allowed to randomise * the heap, we can put it above 1TB so it is backed by a 1TB diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 797ea95aae2e..04f638d82fb3 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -57,7 +57,6 @@ #include <asm/cache.h> #include <asm/page.h> #include <asm/mmu.h> -#include <asm/mmu-hash64.h> #include <asm/firmware.h> #include <asm/xmon.h> #include <asm/udbg.h> diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c index 94e2df3cae07..137dc22afa42 100644 --- a/arch/powerpc/kernel/vdso.c +++ b/arch/powerpc/kernel/vdso.c @@ -50,6 +50,9 @@ /* Max supported size for symbol names */ #define MAX_SYMNAME 64 +/* The alignment of the vDSO */ +#define VDSO_ALIGNMENT (1 << 16) + extern char vdso32_start, vdso32_end; static void *vdso32_kbase = &vdso32_start; static unsigned int vdso32_pages; @@ -231,15 +234,21 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) * pick a base address for the vDSO in process space. We try to put it * at vdso_base which is the "natural" base for it, but we might fail * and end up putting it elsewhere. + * Add enough to the size so that the result can be aligned. */ down_write(&mm->mmap_sem); vdso_base = get_unmapped_area(NULL, vdso_base, - vdso_pages << PAGE_SHIFT, 0, 0); + (vdso_pages << PAGE_SHIFT) + + ((VDSO_ALIGNMENT - 1) & PAGE_MASK), + 0, 0); if (IS_ERR_VALUE(vdso_base)) { rc = vdso_base; goto fail_mmapsem; } + /* Add required alignment. */ + vdso_base = ALIGN(vdso_base, VDSO_ALIGNMENT); + /* * Put vDSO base into mm struct. We need to do this before calling * install_special_mapping or the perf counter mmap tracking code diff --git a/arch/powerpc/kernel/vdso32/vdso32.lds.S b/arch/powerpc/kernel/vdso32/vdso32.lds.S index 904ef1360dd7..0546bcd49cd0 100644 --- a/arch/powerpc/kernel/vdso32/vdso32.lds.S +++ b/arch/powerpc/kernel/vdso32/vdso32.lds.S @@ -25,7 +25,7 @@ SECTIONS . = ALIGN(16); .text : { *(.text .stub .text.* .gnu.linkonce.t.* __ftr_alt_*) - } + } :text PROVIDE(__etext = .); PROVIDE(_etext = .); PROVIDE(etext = .); @@ -56,7 +56,7 @@ SECTIONS .fixup : { *(.fixup) } .dynamic : { *(.dynamic) } :text :dynamic - .got : { *(.got) } + .got : { *(.got) } :text .plt : { *(.plt) } _end = .; diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c index c31e5b534f0a..d45be5b5ad49 100644 --- a/arch/powerpc/platforms/52xx/mpc5200_simple.c +++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c @@ -51,6 +51,8 @@ static void __init mpc5200_simple_setup_arch(void) /* list of the supported boards */ static char *board[] __initdata = { "intercontrol,digsy-mtc", + "manroland,mucmc52", + "manroland,uc101", "phytec,pcm030", "phytec,pcm032", "promess,motionpro", diff --git a/arch/powerpc/platforms/iseries/Makefile b/arch/powerpc/platforms/iseries/Makefile index cc7161ff1666..ce014928d460 100644 --- a/arch/powerpc/platforms/iseries/Makefile +++ b/arch/powerpc/platforms/iseries/Makefile @@ -1,18 +1,9 @@ EXTRA_CFLAGS += -mno-minimal-toc -extra-y += dt.o - obj-y += exception.o -obj-y += hvlog.o hvlpconfig.o lpardata.o setup.o dt_mod.o mf.o lpevents.o \ +obj-y += hvlog.o hvlpconfig.o lpardata.o setup.o dt.o mf.o lpevents.o \ hvcall.o proc.o htab.o iommu.o misc.o irq.o obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_VIOPATH) += viopath.o vio.o obj-$(CONFIG_MODULES) += ksyms.o - -quiet_cmd_dt_strings = DT_STR $@ - cmd_dt_strings = $(OBJCOPY) --rename-section .rodata.str1.8=.dt_strings \ - $< $@ - -$(obj)/dt_mod.o: $(obj)/dt.o - $(call if_changed,dt_strings) diff --git a/arch/powerpc/platforms/iseries/dt.c b/arch/powerpc/platforms/iseries/dt.c index c5a87a72057b..7f45a51fe793 100644 --- a/arch/powerpc/platforms/iseries/dt.c +++ b/arch/powerpc/platforms/iseries/dt.c @@ -51,11 +51,16 @@ /* * These are created by the linker script at the start and end - * of the section containing all the strings from this file. + * of the section containing all the strings marked with the DS macro. */ extern char __dt_strings_start[]; extern char __dt_strings_end[]; +#define DS(s) ({ \ + static const char __s[] __attribute__((section(".dt_strings"))) = s; \ + __s; \ +}) + struct iseries_flat_dt { struct boot_param_header header; u64 reserve_map[2]; @@ -64,9 +69,8 @@ struct iseries_flat_dt { static void * __initdata dt_data; /* - * Putting these strings here keeps them out of the section - * that we rename to .dt_strings using objcopy and capture - * for the strings blob of the flattened device tree. + * Putting these strings here keeps them out of the .dt_strings section + * that we capture for the strings blob of the flattened device tree. */ static char __initdata device_type_cpu[] = "cpu"; static char __initdata device_type_memory[] = "memory"; @@ -173,7 +177,7 @@ static void __init dt_start_node(struct iseries_flat_dt *dt, const char *name) #define dt_end_node(dt) dt_push_u32(dt, OF_DT_END_NODE) -static void __init dt_prop(struct iseries_flat_dt *dt, const char *name, +static void __init __dt_prop(struct iseries_flat_dt *dt, const char *name, const void *data, int len) { unsigned long offset; @@ -191,44 +195,32 @@ static void __init dt_prop(struct iseries_flat_dt *dt, const char *name, /* The actual data. */ dt_push_bytes(dt, data, len); } +#define dt_prop(dt, name, data, len) __dt_prop((dt), DS(name), (data), (len)) -static void __init dt_prop_str(struct iseries_flat_dt *dt, const char *name, - const char *data) -{ - dt_prop(dt, name, data, strlen(data) + 1); /* + 1 for NULL */ -} +#define dt_prop_str(dt, name, data) \ + dt_prop((dt), name, (data), strlen((data)) + 1); /* + 1 for NULL */ -static void __init dt_prop_u32(struct iseries_flat_dt *dt, const char *name, +static void __init __dt_prop_u32(struct iseries_flat_dt *dt, const char *name, u32 data) { - dt_prop(dt, name, &data, sizeof(u32)); + __dt_prop(dt, name, &data, sizeof(u32)); } +#define dt_prop_u32(dt, name, data) __dt_prop_u32((dt), DS(name), (data)) -static void __init __maybe_unused dt_prop_u64(struct iseries_flat_dt *dt, - const char *name, - u64 data) +static void __init __maybe_unused __dt_prop_u64(struct iseries_flat_dt *dt, + const char *name, u64 data) { - dt_prop(dt, name, &data, sizeof(u64)); + __dt_prop(dt, name, &data, sizeof(u64)); } +#define dt_prop_u64(dt, name, data) __dt_prop_u64((dt), DS(name), (data)) -static void __init dt_prop_u64_list(struct iseries_flat_dt *dt, - const char *name, u64 *data, int n) -{ - dt_prop(dt, name, data, sizeof(u64) * n); -} +#define dt_prop_u64_list(dt, name, data, n) \ + dt_prop((dt), name, (data), sizeof(u64) * (n)) -static void __init dt_prop_u32_list(struct iseries_flat_dt *dt, - const char *name, u32 *data, int n) -{ - dt_prop(dt, name, data, sizeof(u32) * n); -} +#define dt_prop_u32_list(dt, name, data, n) \ + dt_prop((dt), name, (data), sizeof(u32) * (n)) -#ifdef notyet -static void __init dt_prop_empty(struct iseries_flat_dt *dt, const char *name) -{ - dt_prop(dt, name, NULL, 0); -} -#endif +#define dt_prop_empty(dt, name) dt_prop((dt), name, NULL, 0) static void __init dt_cpus(struct iseries_flat_dt *dt) { diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index c6f0a71b405e..bdbe96c8a7e4 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -517,6 +517,15 @@ static int xmon_core(struct pt_regs *regs, int fromipi) in_xmon = 0; #endif +#ifdef CONFIG_BOOKE + if (regs->msr & MSR_DE) { + bp = at_breakpoint(regs->nip); + if (bp != NULL) { + regs->nip = (unsigned long) &bp->instr[0]; + atomic_inc(&bp->ref_count); + } + } +#else if ((regs->msr & (MSR_IR|MSR_PR|MSR_SF)) == (MSR_IR|MSR_SF)) { bp = at_breakpoint(regs->nip); if (bp != NULL) { @@ -530,7 +539,7 @@ static int xmon_core(struct pt_regs *regs, int fromipi) } } } - +#endif insert_cpu_bpts(); local_irq_restore(flags); @@ -894,6 +903,14 @@ cmds(struct pt_regs *excp) } } +#ifdef CONFIG_BOOKE +static int do_step(struct pt_regs *regs) +{ + regs->msr |= MSR_DE; + mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM); + return 1; +} +#else /* * Step a single instruction. * Some instructions we emulate, others we execute with MSR_SE set. @@ -924,6 +941,7 @@ static int do_step(struct pt_regs *regs) regs->msr |= MSR_SE; return 1; } +#endif static void bootcmds(void) { diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 0dc7e3cbeffa..88cdeb9f72d9 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -121,6 +121,9 @@ config SYS_SUPPORTS_APM_EMULATION bool select ARCH_SUSPEND_POSSIBLE +config SYS_SUPPORTS_HUGETLBFS + bool + config SYS_SUPPORTS_SMP bool @@ -195,6 +198,7 @@ config CPU_SH4 select CPU_HAS_SR_RB select CPU_HAS_FPU if !CPU_SH4AL_DSP select SYS_SUPPORTS_TMU + select SYS_SUPPORTS_HUGETLBFS if MMU config CPU_SH4A bool @@ -209,6 +213,7 @@ config CPU_SH5 bool select CPU_HAS_FPU select SYS_SUPPORTS_TMU + select SYS_SUPPORTS_HUGETLBFS if MMU config CPU_SHX2 bool diff --git a/arch/sh/Makefile b/arch/sh/Makefile index fc51a918b31a..66e40aabc600 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -199,7 +199,7 @@ endif libs-$(CONFIG_SUPERH32) := arch/sh/lib/ $(libs-y) libs-$(CONFIG_SUPERH64) := arch/sh/lib64/ $(libs-y) -BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.srec \ +BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.srec uImage.bin \ zImage vmlinux.srec romImage PHONY += maketools $(BOOT_TARGETS) FORCE @@ -225,6 +225,7 @@ define archhelp @echo ' vmlinux.srec - Create an ELF S-record' @echo '* uImage - Alias to bootable U-Boot image' @echo ' uImage.srec - Create an S-record for U-Boot' + @echo ' uImage.bin - Kernel-only image for U-Boot (bin)' @echo '* uImage.gz - Kernel-only image for U-Boot (gzip)' @echo ' uImage.bz2 - Kernel-only image for U-Boot (bzip2)' @echo ' uImage.lzma - Kernel-only image for U-Boot (lzma)' diff --git a/arch/sh/boards/mach-rsk/devices-rsk7203.c b/arch/sh/boards/mach-rsk/devices-rsk7203.c index 4af3a771c058..c37617e63220 100644 --- a/arch/sh/boards/mach-rsk/devices-rsk7203.c +++ b/arch/sh/boards/mach-rsk/devices-rsk7203.c @@ -11,10 +11,6 @@ #include <linux/types.h> #include <linux/platform_device.h> #include <linux/interrupt.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/map.h> #include <linux/smsc911x.h> #include <linux/gpio.h> #include <linux/leds.h> diff --git a/arch/sh/boards/mach-rsk/setup.c b/arch/sh/boards/mach-rsk/setup.c index af64d030a5c7..a5c0df785bfe 100644 --- a/arch/sh/boards/mach-rsk/setup.c +++ b/arch/sh/boards/mach-rsk/setup.c @@ -15,14 +15,12 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> +#ifdef CONFIG_MTD #include <linux/mtd/map.h> +#endif #include <asm/machvec.h> #include <asm/io.h> -static const char *probes[] = { "cmdlinepart", NULL }; - -static struct mtd_partition *parsed_partitions; - static struct mtd_partition rsk_partitions[] = { { .name = "Bootloader", @@ -41,6 +39,8 @@ static struct mtd_partition rsk_partitions[] = { }; static struct physmap_flash_data flash_data = { + .parts = rsk_partitions, + .nr_parts = ARRAY_SIZE(rsk_partitions), .width = 2, }; @@ -60,7 +60,8 @@ static struct platform_device flash_device = { }, }; -static struct mtd_info *flash_mtd; +#ifdef CONFIG_MTD +static const char *probes[] = { "cmdlinepart", NULL }; static struct map_info rsk_flash_map = { .name = "RSK+ Flash", @@ -68,6 +69,10 @@ static struct map_info rsk_flash_map = { .bankwidth = 2, }; +static struct mtd_info *flash_mtd; + +static struct mtd_partition *parsed_partitions; + static void __init set_mtd_partitions(void) { int nr_parts = 0; @@ -77,14 +82,14 @@ static void __init set_mtd_partitions(void) nr_parts = parse_mtd_partitions(flash_mtd, probes, &parsed_partitions, 0); /* If there is no partition table, used the hard coded table */ - if (nr_parts <= 0) { - flash_data.parts = rsk_partitions; - flash_data.nr_parts = ARRAY_SIZE(rsk_partitions); - } else { + if (nr_parts > 0) { flash_data.nr_parts = nr_parts; flash_data.parts = parsed_partitions; } } +#else +static inline void set_mtd_partitions(void) {} +#endif static struct platform_device *rsk_devices[] __initdata = { &flash_device, diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile index a1316872be6f..cb8cf5572e79 100644 --- a/arch/sh/boot/Makefile +++ b/arch/sh/boot/Makefile @@ -20,11 +20,12 @@ CONFIG_BOOT_LINK_OFFSET ?= 0x00800000 CONFIG_ZERO_PAGE_OFFSET ?= 0x00001000 CONFIG_ENTRY_OFFSET ?= 0x00001000 +suffix-y := bin suffix-$(CONFIG_KERNEL_GZIP) := gz suffix-$(CONFIG_KERNEL_BZIP2) := bz2 suffix-$(CONFIG_KERNEL_LZMA) := lzma -targets := zImage vmlinux.srec romImage uImage uImage.srec uImage.gz uImage.bz2 uImage.lzma +targets := zImage vmlinux.srec romImage uImage uImage.srec uImage.gz uImage.bz2 uImage.lzma uImage.bin extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma subdir- := compressed romimage @@ -88,6 +89,9 @@ $(obj)/uImage.gz: $(obj)/vmlinux.bin.gz $(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma $(call if_changed,uimage,lzma) +$(obj)/uImage.bin: $(obj)/vmlinux.bin + $(call if_changed,uimage,none) + OBJCOPYFLAGS_vmlinux.srec := -I binary -O srec $(obj)/vmlinux.srec: $(obj)/compressed/vmlinux $(call if_changed,objcopy) diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c index 03b3616c80a5..2d07084e4882 100644 --- a/arch/sh/kernel/dwarf.c +++ b/arch/sh/kernel/dwarf.c @@ -20,6 +20,7 @@ #include <linux/list.h> #include <linux/mempool.h> #include <linux/mm.h> +#include <linux/ftrace.h> #include <asm/dwarf.h> #include <asm/unwinder.h> #include <asm/sections.h> @@ -557,6 +558,27 @@ struct dwarf_frame * dwarf_unwind_stack(unsigned long pc, if (!pc && !prev) pc = (unsigned long)current_text_addr(); +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + /* + * If our stack has been patched by the function graph tracer + * then we might see the address of return_to_handler() where we + * expected to find the real return address. + */ + if (pc == (unsigned long)&return_to_handler) { + int index = current->curr_ret_stack; + + /* + * We currently have no way of tracking how many + * return_to_handler()'s we've seen. If there is more + * than one patched return address on our stack, + * complain loudly. + */ + WARN_ON(index > 0); + + pc = current->ret_stack[index].ret; + } +#endif + frame = mempool_alloc(dwarf_frame_pool, GFP_ATOMIC); if (!frame) { printk(KERN_ERR "Unable to allocate a dwarf frame\n"); diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index 7cb933ba4957..eac7da772fc2 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -11,6 +11,7 @@ #include <linux/module.h> #include <linux/kernel_stat.h> #include <linux/seq_file.h> +#include <linux/ftrace.h> #include <asm/processor.h> #include <asm/machvec.h> #include <asm/uaccess.h> @@ -106,7 +107,7 @@ static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly; static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly; #endif -asmlinkage int do_IRQ(unsigned int irq, struct pt_regs *regs) +asmlinkage __irq_entry int do_IRQ(unsigned int irq, struct pt_regs *regs) { struct pt_regs *old_regs = set_irq_regs(regs); #ifdef CONFIG_IRQSTACKS diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c index 86c270428357..444cce3ae921 100644 --- a/arch/sh/kernel/sh_ksyms_32.c +++ b/arch/sh/kernel/sh_ksyms_32.c @@ -85,6 +85,20 @@ DECLARE_EXPORT(__movstr_i4_even); DECLARE_EXPORT(__movstr_i4_odd); DECLARE_EXPORT(__movstrSI12_i4); DECLARE_EXPORT(__movmem); +DECLARE_EXPORT(__movmemSI8); +DECLARE_EXPORT(__movmemSI12); +DECLARE_EXPORT(__movmemSI16); +DECLARE_EXPORT(__movmemSI20); +DECLARE_EXPORT(__movmemSI24); +DECLARE_EXPORT(__movmemSI28); +DECLARE_EXPORT(__movmemSI32); +DECLARE_EXPORT(__movmemSI36); +DECLARE_EXPORT(__movmemSI40); +DECLARE_EXPORT(__movmemSI44); +DECLARE_EXPORT(__movmemSI48); +DECLARE_EXPORT(__movmemSI52); +DECLARE_EXPORT(__movmemSI56); +DECLARE_EXPORT(__movmemSI60); DECLARE_EXPORT(__movmem_i4_even); DECLARE_EXPORT(__movmem_i4_odd); DECLARE_EXPORT(__movmemSI12_i4); diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 64dc1ad59801..7f7b52f9beba 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -227,7 +227,7 @@ endchoice choice prompt "HugeTLB page size" - depends on HUGETLB_PAGE && (CPU_SH4 || CPU_SH5) && MMU + depends on HUGETLB_PAGE default HUGETLB_PAGE_SIZE_1MB if PAGE_SIZE_64KB default HUGETLB_PAGE_SIZE_64K diff --git a/arch/x86/boot/setup.ld b/arch/x86/boot/setup.ld index 0f6ec455a2b1..03c0683636b6 100644 --- a/arch/x86/boot/setup.ld +++ b/arch/x86/boot/setup.ld @@ -53,6 +53,9 @@ SECTIONS /DISCARD/ : { *(.note*) } + /* + * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility: + */ . = ASSERT(_end <= 0x8000, "Setup too big!"); . = ASSERT(hdr == 0x1f1, "The setup header has the wrong offset!"); /* Necessary for the very-old-loader check to work... */ diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h index 25a92842dd99..d823c245f63b 100644 --- a/arch/x86/include/asm/topology.h +++ b/arch/x86/include/asm/topology.h @@ -143,6 +143,7 @@ extern unsigned long node_remap_size[]; | 1*SD_BALANCE_FORK \ | 0*SD_BALANCE_WAKE \ | 1*SD_WAKE_AFFINE \ + | 1*SD_PREFER_LOCAL \ | 0*SD_SHARE_CPUPOWER \ | 0*SD_POWERSAVINGS_BALANCE \ | 0*SD_SHARE_PKG_RESOURCES \ diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h index 04eb6c958b9d..d1414af98559 100644 --- a/arch/x86/include/asm/uv/uv_hub.h +++ b/arch/x86/include/asm/uv/uv_hub.h @@ -19,6 +19,8 @@ #include <asm/types.h> #include <asm/percpu.h> #include <asm/uv/uv_mmrs.h> +#include <asm/irq_vectors.h> +#include <asm/io_apic.h> /* @@ -114,7 +116,7 @@ /* * The largest possible NASID of a C or M brick (+ 2) */ -#define UV_MAX_NASID_VALUE (UV_MAX_NUMALINK_NODES * 2) +#define UV_MAX_NASID_VALUE (UV_MAX_NUMALINK_BLADES * 2) struct uv_scir_s { struct timer_list timer; @@ -230,6 +232,20 @@ static inline unsigned long uv_gpa(void *v) return uv_soc_phys_ram_to_gpa(__pa(v)); } +/* gnode -> pnode */ +static inline unsigned long uv_gpa_to_gnode(unsigned long gpa) +{ + return gpa >> uv_hub_info->m_val; +} + +/* gpa -> pnode */ +static inline int uv_gpa_to_pnode(unsigned long gpa) +{ + unsigned long n_mask = (1UL << uv_hub_info->n_val) - 1; + + return uv_gpa_to_gnode(gpa) & n_mask; +} + /* pnode, offset --> socket virtual */ static inline void *uv_pnode_offset_to_vaddr(int pnode, unsigned long offset) { @@ -421,9 +437,14 @@ static inline void uv_set_cpu_scir_bits(int cpu, unsigned char value) static inline void uv_hub_send_ipi(int pnode, int apicid, int vector) { unsigned long val; + unsigned long dmode = dest_Fixed; + + if (vector == NMI_VECTOR) + dmode = dest_NMI; val = (1UL << UVH_IPI_INT_SEND_SHFT) | ((apicid) << UVH_IPI_INT_APIC_ID_SHFT) | + (dmode << UVH_IPI_INT_DELIVERY_MODE_SHFT) | (vector << UVH_IPI_INT_VECTOR_SHFT); uv_write_global_mmr64(pnode, UVH_IPI_INT, val); } diff --git a/arch/x86/kernel/acpi/realmode/wakeup.lds.S b/arch/x86/kernel/acpi/realmode/wakeup.lds.S index 7da00b799cda..060fff8f5c5b 100644 --- a/arch/x86/kernel/acpi/realmode/wakeup.lds.S +++ b/arch/x86/kernel/acpi/realmode/wakeup.lds.S @@ -57,5 +57,8 @@ SECTIONS *(.note*) } + /* + * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility: + */ . = ASSERT(_end <= WAKEUP_SIZE, "Wakeup too big!"); } diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index f5f5886a6b53..326c25477d3d 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -352,14 +352,14 @@ static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size) for (i = 0; i < ARRAY_SIZE(redir_addrs); i++) { alias.v = uv_read_local_mmr(redir_addrs[i].alias); - if (alias.s.base == 0) { + if (alias.s.enable && alias.s.base == 0) { *size = (1UL << alias.s.m_alias); redirect.v = uv_read_local_mmr(redir_addrs[i].redirect); *base = (unsigned long)redirect.s.dest_base << DEST_SHIFT; return; } } - BUG(); + *base = *size = 0; } enum map_type {map_wb, map_uc}; @@ -619,12 +619,12 @@ void __init uv_system_init(void) uv_cpu_hub_info(cpu)->lowmem_remap_base = lowmem_redir_base; uv_cpu_hub_info(cpu)->lowmem_remap_top = lowmem_redir_size; uv_cpu_hub_info(cpu)->m_val = m_val; - uv_cpu_hub_info(cpu)->n_val = m_val; + uv_cpu_hub_info(cpu)->n_val = n_val; uv_cpu_hub_info(cpu)->numa_blade_id = blade; uv_cpu_hub_info(cpu)->blade_processor_id = lcpu; uv_cpu_hub_info(cpu)->pnode = pnode; uv_cpu_hub_info(cpu)->pnode_mask = pnode_mask; - uv_cpu_hub_info(cpu)->gpa_mask = (1 << (m_val + n_val)) - 1; + uv_cpu_hub_info(cpu)->gpa_mask = (1UL << (m_val + n_val)) - 1; uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper; uv_cpu_hub_info(cpu)->gnode_extra = gnode_extra; uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base; diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index b1598a9436d0..721a77ca8115 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -1214,7 +1214,8 @@ static int __cpuinit mce_cap_init(void) rdmsrl(MSR_IA32_MCG_CAP, cap); b = cap & MCG_BANKCNT_MASK; - printk(KERN_INFO "mce: CPU supports %d MCE banks\n", b); + if (!banks) + printk(KERN_INFO "mce: CPU supports %d MCE banks\n", b); if (b > MAX_NR_BANKS) { printk(KERN_WARNING diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c index 503c1f2e8835..1740c85e24bb 100644 --- a/arch/x86/kernel/tlb_uv.c +++ b/arch/x86/kernel/tlb_uv.c @@ -23,8 +23,6 @@ static struct bau_control **uv_bau_table_bases __read_mostly; static int uv_bau_retry_limit __read_mostly; -/* position of pnode (which is nasid>>1): */ -static int uv_nshift __read_mostly; /* base pnode in this partition */ static int uv_partition_base_pnode __read_mostly; @@ -723,7 +721,7 @@ uv_activation_descriptor_init(int node, int pnode) BUG_ON(!adp); pa = uv_gpa(adp); /* need the real nasid*/ - n = pa >> uv_nshift; + n = uv_gpa_to_pnode(pa); m = pa & uv_mmask; uv_write_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE, @@ -778,7 +776,7 @@ uv_payload_queue_init(int node, int pnode, struct bau_control *bau_tablesp) * need the pnode of where the memory was really allocated */ pa = uv_gpa(pqp); - pn = pa >> uv_nshift; + pn = uv_gpa_to_pnode(pa); uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST, ((unsigned long)pn << UV_PAYLOADQ_PNODE_SHIFT) | @@ -843,8 +841,7 @@ static int __init uv_bau_init(void) GFP_KERNEL, cpu_to_node(cur_cpu)); uv_bau_retry_limit = 1; - uv_nshift = uv_hub_info->n_val; - uv_mmask = (1UL << uv_hub_info->n_val) - 1; + uv_mmask = (1UL << uv_hub_info->m_val) - 1; nblades = uv_num_possible_blades(); uv_bau_table_bases = (struct bau_control **) diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S index 92929fb3f9fa..3c68fe2d46cf 100644 --- a/arch/x86/kernel/vmlinux.lds.S +++ b/arch/x86/kernel/vmlinux.lds.S @@ -305,6 +305,9 @@ SECTIONS #ifdef CONFIG_X86_32 +/* + * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility: + */ . = ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE), "kernel image bigger than KERNEL_IMAGE_SIZE"); #else diff --git a/drivers/block/loop.c b/drivers/block/loop.c index edda9ea7c626..bd112c8c7bcd 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -949,7 +949,7 @@ static int loop_clr_fd(struct loop_device *lo, struct block_device *bdev) lo->lo_state = Lo_unbound; /* This is safe: open() is still holding a reference. */ module_put(THIS_MODULE); - if (max_part > 0) + if (max_part > 0 && bdev) ioctl_by_bdev(bdev, BLKRRPART, 0); mutex_unlock(&lo->lo_ctl_mutex); /* diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 43f19389647a..51042f0ba7e1 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -3,7 +3,6 @@ #include <linux/blkdev.h> #include <linux/hdreg.h> #include <linux/virtio.h> -#include <linux/virtio_ids.h> #include <linux/virtio_blk.h> #include <linux/scatterlist.h> @@ -183,34 +182,6 @@ static void do_virtblk_request(struct request_queue *q) vblk->vq->vq_ops->kick(vblk->vq); } -/* return ATA identify data - */ -static int virtblk_identify(struct gendisk *disk, void *argp) -{ - struct virtio_blk *vblk = disk->private_data; - void *opaque; - int err = -ENOMEM; - - opaque = kmalloc(VIRTIO_BLK_ID_BYTES, GFP_KERNEL); - if (!opaque) - goto out; - - err = virtio_config_buf(vblk->vdev, VIRTIO_BLK_F_IDENTIFY, - offsetof(struct virtio_blk_config, identify), opaque, - VIRTIO_BLK_ID_BYTES); - - if (err) - goto out_kfree; - - if (copy_to_user(argp, opaque, VIRTIO_BLK_ID_BYTES)) - err = -EFAULT; - -out_kfree: - kfree(opaque); -out: - return err; -} - static void virtblk_prepare_flush(struct request_queue *q, struct request *req) { req->cmd_type = REQ_TYPE_LINUX_BLOCK; @@ -222,10 +193,6 @@ static int virtblk_ioctl(struct block_device *bdev, fmode_t mode, { struct gendisk *disk = bdev->bd_disk; struct virtio_blk *vblk = disk->private_data; - void __user *argp = (void __user *)data; - - if (cmd == HDIO_GET_IDENTITY) - return virtblk_identify(disk, argp); /* * Only allow the generic SCSI ioctls if the host can support it. @@ -233,7 +200,8 @@ static int virtblk_ioctl(struct block_device *bdev, fmode_t mode, if (!virtio_has_feature(vblk->vdev, VIRTIO_BLK_F_SCSI)) return -ENOTTY; - return scsi_cmd_ioctl(disk->queue, disk, mode, cmd, argp); + return scsi_cmd_ioctl(disk->queue, disk, mode, cmd, + (void __user *)data); } /* We provide getgeo only to please some old bootloader/partitioning tools */ @@ -332,7 +300,6 @@ static int __devinit virtblk_probe(struct virtio_device *vdev) } vblk->disk->queue->queuedata = vblk; - queue_flag_set_unlocked(QUEUE_FLAG_VIRT, vblk->disk->queue); if (index < 26) { sprintf(vblk->disk->disk_name, "vd%c", 'a' + index % 26); @@ -445,7 +412,7 @@ static struct virtio_device_id id_table[] = { static unsigned int features[] = { VIRTIO_BLK_F_BARRIER, VIRTIO_BLK_F_SEG_MAX, VIRTIO_BLK_F_SIZE_MAX, VIRTIO_BLK_F_GEOMETRY, VIRTIO_BLK_F_RO, VIRTIO_BLK_F_BLK_SIZE, - VIRTIO_BLK_F_SCSI, VIRTIO_BLK_F_IDENTIFY, VIRTIO_BLK_F_FLUSH + VIRTIO_BLK_F_SCSI, VIRTIO_BLK_F_FLUSH }; /* diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c index 962968f05b94..915157fcff98 100644 --- a/drivers/char/hw_random/virtio-rng.c +++ b/drivers/char/hw_random/virtio-rng.c @@ -21,7 +21,6 @@ #include <linux/scatterlist.h> #include <linux/spinlock.h> #include <linux/virtio.h> -#include <linux/virtio_ids.h> #include <linux/virtio_rng.h> /* The host will fill any buffer we give it with sweet, sweet randomness. We @@ -117,7 +116,7 @@ static int virtrng_probe(struct virtio_device *vdev) return 0; } -static void virtrng_remove(struct virtio_device *vdev) +static void __devexit virtrng_remove(struct virtio_device *vdev) { vdev->config->reset(vdev); hwrng_unregister(&virtio_hwrng); diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index 0d328b59568d..a035ae39a359 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -31,7 +31,6 @@ #include <linux/err.h> #include <linux/init.h> #include <linux/virtio.h> -#include <linux/virtio_ids.h> #include <linux/virtio_console.h> #include "hvc_console.h" diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index ad41f19b8e3f..12fdd3987a36 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -76,8 +76,11 @@ static void cpuidle_idle_call(void) #endif /* ask the governor for the next state */ next_state = cpuidle_curr_governor->select(dev); - if (need_resched()) + if (need_resched()) { + local_irq_enable(); return; + } + target_state = &dev->states[next_state]; /* enter the state and update stats */ diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c index d335086f4a26..77a9579d7167 100644 --- a/drivers/edac/i5000_edac.c +++ b/drivers/edac/i5000_edac.c @@ -1173,7 +1173,7 @@ static void i5000_get_mc_regs(struct mem_ctl_info *mci) pci_read_config_word(pvt->branch_1, where, &pvt->b1_mtr[slot_row]); debugf2("MTR%d where=0x%x B1 value=0x%x\n", slot_row, - where, pvt->b0_mtr[slot_row]); + where, pvt->b1_mtr[slot_row]); } else { pvt->b1_mtr[slot_row] = 0; } @@ -1232,7 +1232,7 @@ static int i5000_init_csrows(struct mem_ctl_info *mci) struct csrow_info *p_csrow; int empty, channel_count; int max_csrows; - int mtr; + int mtr, mtr1; int csrow_megs; int channel; int csrow; @@ -1251,9 +1251,10 @@ static int i5000_init_csrows(struct mem_ctl_info *mci) /* use branch 0 for the basis */ mtr = pvt->b0_mtr[csrow >> 1]; + mtr1 = pvt->b1_mtr[csrow >> 1]; /* if no DIMMS on this row, continue */ - if (!MTR_DIMMS_PRESENT(mtr)) + if (!MTR_DIMMS_PRESENT(mtr) && !MTR_DIMMS_PRESENT(mtr1)) continue; /* FAKE OUT VALUES, FIXME */ diff --git a/drivers/edac/i5400_edac.c b/drivers/edac/i5400_edac.c index b08b6d8e2dc7..f99d10655ed4 100644 --- a/drivers/edac/i5400_edac.c +++ b/drivers/edac/i5400_edac.c @@ -46,9 +46,10 @@ /* Limits for i5400 */ #define NUM_MTRS_PER_BRANCH 4 #define CHANNELS_PER_BRANCH 2 +#define MAX_DIMMS_PER_CHANNEL NUM_MTRS_PER_BRANCH #define MAX_CHANNELS 4 -#define MAX_DIMMS (MAX_CHANNELS * 4) /* Up to 4 DIMM's per channel */ -#define MAX_CSROWS (MAX_DIMMS * 2) /* max possible csrows per channel */ +/* max possible csrows per channel */ +#define MAX_CSROWS (MAX_DIMMS_PER_CHANNEL) /* Device 16, * Function 0: System Address @@ -331,7 +332,6 @@ static const struct i5400_dev_info i5400_devs[] = { struct i5400_dimm_info { int megabytes; /* size, 0 means not present */ - int dual_rank; }; /* driver private data structure */ @@ -849,11 +849,9 @@ static int determine_mtr(struct i5400_pvt *pvt, int csrow, int channel) int n; /* There is one MTR for each slot pair of FB-DIMMs, - Each slot may have one or two ranks (2 csrows), Each slot pair may be at branch 0 or branch 1. - So, csrow should be divided by eight */ - n = csrow >> 3; + n = csrow; if (n >= NUM_MTRS_PER_BRANCH) { debugf0("ERROR: trying to access an invalid csrow: %d\n", @@ -905,25 +903,22 @@ static void handle_channel(struct i5400_pvt *pvt, int csrow, int channel, amb_present_reg = determine_amb_present_reg(pvt, channel); /* Determine if there is a DIMM present in this DIMM slot */ - if (amb_present_reg & (1 << (csrow >> 1))) { - dinfo->dual_rank = MTR_DIMM_RANK(mtr); - - if (!((dinfo->dual_rank == 0) && - ((csrow & 0x1) == 0x1))) { - /* Start with the number of bits for a Bank - * on the DRAM */ - addrBits = MTR_DRAM_BANKS_ADDR_BITS(mtr); - /* Add thenumber of ROW bits */ - addrBits += MTR_DIMM_ROWS_ADDR_BITS(mtr); - /* add the number of COLUMN bits */ - addrBits += MTR_DIMM_COLS_ADDR_BITS(mtr); - - addrBits += 6; /* add 64 bits per DIMM */ - addrBits -= 20; /* divide by 2^^20 */ - addrBits -= 3; /* 8 bits per bytes */ - - dinfo->megabytes = 1 << addrBits; - } + if (amb_present_reg & (1 << csrow)) { + /* Start with the number of bits for a Bank + * on the DRAM */ + addrBits = MTR_DRAM_BANKS_ADDR_BITS(mtr); + /* Add thenumber of ROW bits */ + addrBits += MTR_DIMM_ROWS_ADDR_BITS(mtr); + /* add the number of COLUMN bits */ + addrBits += MTR_DIMM_COLS_ADDR_BITS(mtr); + /* add the number of RANK bits */ + addrBits += MTR_DIMM_RANK(mtr); + + addrBits += 6; /* add 64 bits per DIMM */ + addrBits -= 20; /* divide by 2^^20 */ + addrBits -= 3; /* 8 bits per bytes */ + + dinfo->megabytes = 1 << addrBits; } } } @@ -951,12 +946,12 @@ static void calculate_dimm_size(struct i5400_pvt *pvt) return; } - /* Scan all the actual CSROWS (which is # of DIMMS * 2) + /* Scan all the actual CSROWS * and calculate the information for each DIMM * Start with the highest csrow first, to display it first * and work toward the 0th csrow */ - max_csrows = pvt->maxdimmperch * 2; + max_csrows = pvt->maxdimmperch; for (csrow = max_csrows - 1; csrow >= 0; csrow--) { /* on an odd csrow, first output a 'boundary' marker, @@ -1064,7 +1059,7 @@ static void i5400_get_mc_regs(struct mem_ctl_info *mci) /* Get the set of MTR[0-3] regs by each branch */ for (slot_row = 0; slot_row < NUM_MTRS_PER_BRANCH; slot_row++) { - int where = MTR0 + (slot_row * sizeof(u32)); + int where = MTR0 + (slot_row * sizeof(u16)); /* Branch 0 set of MTR registers */ pci_read_config_word(pvt->branch_0, where, @@ -1146,7 +1141,7 @@ static int i5400_init_csrows(struct mem_ctl_info *mci) pvt = mci->pvt_info; channel_count = pvt->maxch; - max_csrows = pvt->maxdimmperch * 2; + max_csrows = pvt->maxdimmperch; empty = 1; /* Assume NO memory */ @@ -1215,28 +1210,6 @@ static void i5400_enable_error_reporting(struct mem_ctl_info *mci) } /* - * i5400_get_dimm_and_channel_counts(pdev, &num_csrows, &num_channels) - * - * ask the device how many channels are present and how many CSROWS - * as well - */ -static void i5400_get_dimm_and_channel_counts(struct pci_dev *pdev, - int *num_dimms_per_channel, - int *num_channels) -{ - u8 value; - - /* Need to retrieve just how many channels and dimms per channel are - * supported on this memory controller - */ - pci_read_config_byte(pdev, MAXDIMMPERCH, &value); - *num_dimms_per_channel = (int)value * 2; - - pci_read_config_byte(pdev, MAXCH, &value); - *num_channels = (int)value; -} - -/* * i5400_probe1 Probe for ONE instance of device to see if it is * present. * return: @@ -1263,22 +1236,16 @@ static int i5400_probe1(struct pci_dev *pdev, int dev_idx) if (PCI_FUNC(pdev->devfn) != 0) return -ENODEV; - /* Ask the devices for the number of CSROWS and CHANNELS so - * that we can calculate the memory resources, etc - * - * The Chipset will report what it can handle which will be greater - * or equal to what the motherboard manufacturer will implement. - * - * As we don't have a motherboard identification routine to determine + /* As we don't have a motherboard identification routine to determine * actual number of slots/dimms per channel, we thus utilize the * resource as specified by the chipset. Thus, we might have * have more DIMMs per channel than actually on the mobo, but this * allows the driver to support upto the chipset max, without * some fancy mobo determination. */ - i5400_get_dimm_and_channel_counts(pdev, &num_dimms_per_channel, - &num_channels); - num_csrows = num_dimms_per_channel * 2; + num_dimms_per_channel = MAX_DIMMS_PER_CHANNEL; + num_channels = MAX_CHANNELS; + num_csrows = num_dimms_per_channel; debugf0("MC: %s(): Number of - Channels= %d DIMMS= %d CSROWS= %d\n", __func__, num_channels, num_dimms_per_channel, num_csrows); diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c index 157f6504f25e..cf27402af97b 100644 --- a/drivers/edac/mpc85xx_edac.c +++ b/drivers/edac/mpc85xx_edac.c @@ -26,7 +26,9 @@ #include "mpc85xx_edac.h" static int edac_dev_idx; +#ifdef CONFIG_PCI static int edac_pci_idx; +#endif static int edac_mc_idx; static u32 orig_ddr_err_disable; diff --git a/drivers/gpio/twl4030-gpio.c b/drivers/gpio/twl4030-gpio.c index afad14792141..49384a7c5492 100644 --- a/drivers/gpio/twl4030-gpio.c +++ b/drivers/gpio/twl4030-gpio.c @@ -460,7 +460,8 @@ no_irqs: return ret; } -static int __devexit gpio_twl4030_remove(struct platform_device *pdev) +/* Cannot use __devexit as gpio_twl4030_probe() calls us */ +static int gpio_twl4030_remove(struct platform_device *pdev) { struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data; int status; @@ -493,7 +494,7 @@ static struct platform_driver gpio_twl4030_driver = { .driver.name = "twl4030_gpio", .driver.owner = THIS_MODULE, .probe = gpio_twl4030_probe, - .remove = __devexit_p(gpio_twl4030_remove), + .remove = gpio_twl4030_remove, }; static int __init gpio_twl4030_init(void) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 3c0d2b3aed76..cea665d86dd3 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -626,6 +626,12 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev, return NULL; } + /* it is incorrect if hsync/vsync width is zero */ + if (!hsync_pulse_width || !vsync_pulse_width) { + DRM_DEBUG_KMS("Incorrect Detailed timing. " + "Wrong Hsync/Vsync pulse width\n"); + return NULL; + } mode = drm_mode_create(dev); if (!mode) return NULL; @@ -647,6 +653,15 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev, mode->vsync_end = mode->vsync_start + vsync_pulse_width; mode->vtotal = mode->vdisplay + vblank; + /* perform the basic check for the detailed timing */ + if (mode->hsync_end > mode->htotal || + mode->vsync_end > mode->vtotal) { + drm_mode_destroy(dev, mode); + DRM_DEBUG_KMS("Incorrect detailed timing. " + "Sync is beyond the blank.\n"); + return NULL; + } + drm_mode_set_name(mode); if (pt->misc & DRM_EDID_PT_INTERLACED) diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 23dc9c115fd9..9c924614c418 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -454,22 +454,39 @@ out_free: } EXPORT_SYMBOL(drm_fb_helper_init_crtc_count); -static void setcolreg(struct drm_crtc *crtc, u16 red, u16 green, +static int setcolreg(struct drm_crtc *crtc, u16 red, u16 green, u16 blue, u16 regno, struct fb_info *info) { struct drm_fb_helper *fb_helper = info->par; struct drm_framebuffer *fb = fb_helper->fb; int pindex; + if (info->fix.visual == FB_VISUAL_TRUECOLOR) { + u32 *palette; + u32 value; + /* place color in psuedopalette */ + if (regno > 16) + return -EINVAL; + palette = (u32 *)info->pseudo_palette; + red >>= (16 - info->var.red.length); + green >>= (16 - info->var.green.length); + blue >>= (16 - info->var.blue.length); + value = (red << info->var.red.offset) | + (green << info->var.green.offset) | + (blue << info->var.blue.offset); + palette[regno] = value; + return 0; + } + pindex = regno; if (fb->bits_per_pixel == 16) { pindex = regno << 3; if (fb->depth == 16 && regno > 63) - return; + return -EINVAL; if (fb->depth == 15 && regno > 31) - return; + return -EINVAL; if (fb->depth == 16) { u16 r, g, b; @@ -493,13 +510,7 @@ static void setcolreg(struct drm_crtc *crtc, u16 red, u16 green, if (fb->depth != 16) fb_helper->funcs->gamma_set(crtc, red, green, blue, pindex); - - if (regno < 16 && info->fix.visual == FB_VISUAL_DIRECTCOLOR) { - ((u32 *) fb->pseudo_palette)[regno] = - (regno << info->var.red.offset) | - (regno << info->var.green.offset) | - (regno << info->var.blue.offset); - } + return 0; } int drm_fb_helper_setcmap(struct fb_cmap *cmap, struct fb_info *info) @@ -536,7 +547,9 @@ int drm_fb_helper_setcmap(struct fb_cmap *cmap, struct fb_info *info) if (transp) htransp = *transp++; - setcolreg(crtc, hred, hgreen, hblue, start++, info); + rc = setcolreg(crtc, hred, hgreen, hblue, start++, info); + if (rc) + return rc; } crtc_funcs->load_lut(crtc); } @@ -555,6 +568,7 @@ int drm_fb_helper_setcolreg(unsigned regno, struct drm_device *dev = fb_helper->dev; struct drm_crtc *crtc; int i; + int ret; if (regno > 255) return 1; @@ -568,8 +582,10 @@ int drm_fb_helper_setcolreg(unsigned regno, if (i == fb_helper->crtc_count) continue; + ret = setcolreg(crtc, red, green, blue, regno, info); + if (ret) + return ret; - setcolreg(crtc, red, green, blue, regno, info); crtc_funcs->load_lut(crtc); } return 0; @@ -928,7 +944,7 @@ void drm_fb_helper_fill_fix(struct fb_info *info, uint32_t pitch, { info->fix.type = FB_TYPE_PACKED_PIXELS; info->fix.visual = depth == 8 ? FB_VISUAL_PSEUDOCOLOR : - FB_VISUAL_DIRECTCOLOR; + FB_VISUAL_TRUECOLOR; info->fix.type_aux = 0; info->fix.xpanstep = 1; /* doing it in hw */ info->fix.ypanstep = 1; /* doing it in hw */ diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 3d667031de6e..df988142e6b0 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -582,10 +582,9 @@ int radeon_device_init(struct radeon_device *rdev, DRM_INFO("register mmio size: %u\n", (unsigned)rdev->rmmio_size); /* if we have > 1 VGA cards, then disable the radeon VGA resources */ - r = vga_client_register(rdev->pdev, rdev, NULL, radeon_vga_set_decode); - if (r) { - return -EINVAL; - } + /* this will fail for cards that aren't VGA class devices, just + * ignore it */ + vga_client_register(rdev->pdev, rdev, NULL, radeon_vga_set_decode); r = radeon_init(rdev); if (r) diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c index 2c2cb1ec94c5..27d62574284f 100644 --- a/drivers/hwmon/dme1737.c +++ b/drivers/hwmon/dme1737.c @@ -572,7 +572,7 @@ static struct dme1737_data *dme1737_update_device(struct device *dev) /* Sample register contents every 1 sec */ if (time_after(jiffies, data->last_update + HZ) || !data->valid) { - if (data->type != sch5027) { + if (data->type == dme1737) { data->vid = dme1737_read(data, DME1737_REG_VID) & 0x3f; } @@ -1621,9 +1621,6 @@ static struct attribute *dme1737_misc_attr[] = { &sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr, &sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr, &sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr, - /* Misc */ - &dev_attr_vrm.attr, - &dev_attr_cpu0_vid.attr, NULL }; @@ -1631,6 +1628,18 @@ static const struct attribute_group dme1737_misc_group = { .attrs = dme1737_misc_attr, }; +/* The following struct holds VID-related attributes. Their creation + depends on the chip type which is determined during module load. */ +static struct attribute *dme1737_vid_attr[] = { + &dev_attr_vrm.attr, + &dev_attr_cpu0_vid.attr, + NULL +}; + +static const struct attribute_group dme1737_vid_group = { + .attrs = dme1737_vid_attr, +}; + /* The following structs hold the PWM attributes, some of which are optional. * Their creation depends on the chip configuration which is determined during * module load. */ @@ -1902,6 +1911,9 @@ static void dme1737_remove_files(struct device *dev) if (data->type != sch5027) { sysfs_remove_group(&dev->kobj, &dme1737_misc_group); } + if (data->type == dme1737) { + sysfs_remove_group(&dev->kobj, &dme1737_vid_group); + } sysfs_remove_group(&dev->kobj, &dme1737_group); @@ -1933,6 +1945,13 @@ static int dme1737_create_files(struct device *dev) goto exit_remove; } + /* Create VID-related sysfs attributes */ + if ((data->type == dme1737) && + (err = sysfs_create_group(&dev->kobj, + &dme1737_vid_group))) { + goto exit_remove; + } + /* Create fan sysfs attributes */ for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) { if (data->has_fan & (1 << ix)) { @@ -2127,7 +2146,7 @@ static int dme1737_init_device(struct device *dev) data->pwm_acz[2] = 4; /* pwm3 -> zone3 */ /* Set VRM */ - if (data->type != sch5027) { + if (data->type == dme1737) { data->vrm = vid_which_vrm(); } diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c index 2a7a85a6dc36..da1b1f9488af 100644 --- a/drivers/hwmon/fschmd.c +++ b/drivers/hwmon/fschmd.c @@ -819,7 +819,7 @@ static int watchdog_release(struct inode *inode, struct file *filp) static ssize_t watchdog_write(struct file *filp, const char __user *buf, size_t count, loff_t *offset) { - size_t ret; + int ret; struct fschmd_data *data = filp->private_data; if (count) { diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c index 6679854c85b0..be475e844c2a 100644 --- a/drivers/hwmon/hp_accel.c +++ b/drivers/hwmon/hp_accel.c @@ -197,11 +197,13 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = { AXIS_DMI_MATCH("HP2133", "HP 2133", xy_rotated_left), AXIS_DMI_MATCH("HP2140", "HP 2140", xy_swap_inverted), AXIS_DMI_MATCH("NC653x", "HP Compaq 653", xy_rotated_left_usd), - AXIS_DMI_MATCH("NC673x", "HP Compaq 673", xy_rotated_left_usd), + AXIS_DMI_MATCH("NC6730b", "HP Compaq 6730b", xy_rotated_left_usd), + AXIS_DMI_MATCH("NC6730s", "HP Compaq 6730s", xy_swap), AXIS_DMI_MATCH("NC651xx", "HP Compaq 651", xy_rotated_right), AXIS_DMI_MATCH("NC6710x", "HP Compaq 6710", xy_swap_yz_inverted), AXIS_DMI_MATCH("NC6715x", "HP Compaq 6715", y_inverted), AXIS_DMI_MATCH("NC693xx", "HP EliteBook 693", xy_rotated_right), + AXIS_DMI_MATCH("NC693xx", "HP EliteBook 853", xy_swap), /* Intel-based HP Pavilion dv5 */ AXIS_DMI_MATCH2("HPDV5_I", PRODUCT_NAME, "HP Pavilion dv5", @@ -214,6 +216,7 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = { y_inverted), AXIS_DMI_MATCH("DV7", "HP Pavilion dv7", x_inverted), AXIS_DMI_MATCH("HP8710", "HP Compaq 8710", y_inverted), + AXIS_DMI_MATCH("HDX18", "HP HDX 18", x_inverted), { NULL, } /* Laptop models without axis info (yet): * "NC6910" "HP Compaq 6910" diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index ffeb2a10e1a7..a3749cb0f181 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -1028,12 +1028,11 @@ static int __init it87_find(unsigned short *address, chip_type, *address, sio_data->revision); /* Read GPIO config and VID value from LDN 7 (GPIO) */ - if (chip_type != IT8705F_DEVID) { + if (sio_data->type != it87) { int reg; superio_select(GPIO); - if ((chip_type == it8718) || - (chip_type == it8720)) + if (sio_data->type == it8718 || sio_data->type == it8720) sio_data->vid_value = superio_inb(IT87_SIO_VID_REG); reg = superio_inb(IT87_SIO_PINX2_REG); diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c index e832e975da60..a1c47ee95c0e 100644 --- a/drivers/mfd/twl4030-core.c +++ b/drivers/mfd/twl4030-core.c @@ -795,7 +795,7 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id) twl->client = i2c_new_dummy(client->adapter, twl->address); if (!twl->client) { - dev_err(&twl->client->dev, + dev_err(&client->dev, "can't attach client %d\n", i); status = -ENOMEM; goto fail; diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c index d3015dfb9134..ac056ea6b66e 100644 --- a/drivers/mfd/wm831x-irq.c +++ b/drivers/mfd/wm831x-irq.c @@ -507,6 +507,8 @@ int wm831x_irq_init(struct wm831x *wm831x, int irq) { int i, ret; + mutex_init(&wm831x->irq_lock); + if (!irq) { dev_warn(wm831x->dev, "No interrupt specified - functionality limited\n"); @@ -521,7 +523,6 @@ int wm831x_irq_init(struct wm831x *wm831x, int irq) } wm831x->irq = irq; - mutex_init(&wm831x->irq_lock); INIT_WORK(&wm831x->irq_work, wm831x_irq_worker); /* Mask the individual interrupt sources */ diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 4487cc097911..0aecaaebef3d 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -2013,7 +2013,7 @@ static struct platform_driver omap_hsmmc_driver = { static int __init omap_hsmmc_init(void) { /* Register the MMC driver */ - return platform_driver_register(&omap_hsmmc_driver); + return platform_driver_probe(&omap_hsmmc_driver, omap_hsmmc_probe); } static void __exit omap_hsmmc_cleanup(void) diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index e1f7d0a78b9d..14cec04c34f9 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -42,6 +42,7 @@ #include <linux/log2.h> #include <linux/kthread.h> #include <linux/reboot.h> +#include <linux/kernel.h> #include "ubi.h" /* Maximum length of the 'mtd=' parameter */ @@ -1257,7 +1258,7 @@ static int __init bytes_str_to_int(const char *str) unsigned long result; result = simple_strtoul(str, &endp, 0); - if (str == endp || result < 0) { + if (str == endp || result >= INT_MAX) { printk(KERN_ERR "UBI error: incorrect bytes count: \"%s\"\n", str); return -EINVAL; diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c index e7161adc419d..90af61a2c3e4 100644 --- a/drivers/mtd/ubi/scan.c +++ b/drivers/mtd/ubi/scan.c @@ -794,16 +794,15 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si, * number. */ image_seq = be32_to_cpu(ech->image_seq); - if (!si->image_seq_set) { + if (!ubi->image_seq && image_seq) ubi->image_seq = image_seq; - si->image_seq_set = 1; - } else if (ubi->image_seq && ubi->image_seq != image_seq) { + if (ubi->image_seq && image_seq && + ubi->image_seq != image_seq) { ubi_err("bad image sequence number %d in PEB %d, " "expected %d", image_seq, pnum, ubi->image_seq); ubi_dbg_dump_ec_hdr(ech); return -EINVAL; } - } /* OK, we've done with the EC header, let's look at the VID header */ diff --git a/drivers/mtd/ubi/scan.h b/drivers/mtd/ubi/scan.h index bab31695dace..ff179ad7ca55 100644 --- a/drivers/mtd/ubi/scan.h +++ b/drivers/mtd/ubi/scan.h @@ -103,7 +103,6 @@ struct ubi_scan_volume { * @ec_sum: a temporary variable used when calculating @mean_ec * @ec_count: a temporary variable used when calculating @mean_ec * @corr_count: count of corrupted PEBs - * @image_seq_set: indicates @ubi->image_seq is known * * This data structure contains the result of scanning and may be used by other * UBI sub-systems to build final UBI data structures, further error-recovery @@ -127,7 +126,6 @@ struct ubi_scan_info { uint64_t ec_sum; int ec_count; int corr_count; - int image_seq_set; }; struct ubi_device; diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c index 89876ade5e33..28a0eda92680 100644 --- a/drivers/net/benet/be_cmds.c +++ b/drivers/net/benet/be_cmds.c @@ -243,15 +243,26 @@ static int be_POST_stage_get(struct be_adapter *adapter, u16 *stage) int be_cmd_POST(struct be_adapter *adapter) { - u16 stage, error; + u16 stage; + int status, timeout = 0; - error = be_POST_stage_get(adapter, &stage); - if (error || stage != POST_STAGE_ARMFW_RDY) { - dev_err(&adapter->pdev->dev, "POST failed.\n"); - return -1; - } + do { + status = be_POST_stage_get(adapter, &stage); + if (status) { + dev_err(&adapter->pdev->dev, "POST error; stage=0x%x\n", + stage); + return -1; + } else if (stage != POST_STAGE_ARMFW_RDY) { + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(2 * HZ); + timeout += 2; + } else { + return 0; + } + } while (timeout < 20); - return 0; + dev_err(&adapter->pdev->dev, "POST timeout; stage=0x%x\n", stage); + return -1; } static inline void *embedded_payload(struct be_mcc_wrb *wrb) @@ -729,8 +740,8 @@ int be_cmd_q_destroy(struct be_adapter *adapter, struct be_queue_info *q, /* Create an rx filtering policy configuration on an i/f * Uses mbox */ -int be_cmd_if_create(struct be_adapter *adapter, u32 flags, u8 *mac, - bool pmac_invalid, u32 *if_handle, u32 *pmac_id) +int be_cmd_if_create(struct be_adapter *adapter, u32 cap_flags, u32 en_flags, + u8 *mac, bool pmac_invalid, u32 *if_handle, u32 *pmac_id) { struct be_mcc_wrb *wrb; struct be_cmd_req_if_create *req; @@ -746,8 +757,8 @@ int be_cmd_if_create(struct be_adapter *adapter, u32 flags, u8 *mac, be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON, OPCODE_COMMON_NTWK_INTERFACE_CREATE, sizeof(*req)); - req->capability_flags = cpu_to_le32(flags); - req->enable_flags = cpu_to_le32(flags); + req->capability_flags = cpu_to_le32(cap_flags); + req->enable_flags = cpu_to_le32(en_flags); req->pmac_invalid = pmac_invalid; if (!pmac_invalid) memcpy(req->mac_addr, mac, ETH_ALEN); diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h index a86f917f85f4..49953787e41c 100644 --- a/drivers/net/benet/be_cmds.h +++ b/drivers/net/benet/be_cmds.h @@ -720,8 +720,9 @@ extern int be_cmd_mac_addr_query(struct be_adapter *adapter, u8 *mac_addr, extern int be_cmd_pmac_add(struct be_adapter *adapter, u8 *mac_addr, u32 if_id, u32 *pmac_id); extern int be_cmd_pmac_del(struct be_adapter *adapter, u32 if_id, u32 pmac_id); -extern int be_cmd_if_create(struct be_adapter *adapter, u32 if_flags, u8 *mac, - bool pmac_invalid, u32 *if_handle, u32 *pmac_id); +extern int be_cmd_if_create(struct be_adapter *adapter, u32 cap_flags, + u32 en_flags, u8 *mac, bool pmac_invalid, + u32 *if_handle, u32 *pmac_id); extern int be_cmd_if_destroy(struct be_adapter *adapter, u32 if_handle); extern int be_cmd_eq_create(struct be_adapter *adapter, struct be_queue_info *eq, int eq_delay); diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 6d5e81f7046f..1f941f027718 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -1620,19 +1620,22 @@ static int be_open(struct net_device *netdev) static int be_setup(struct be_adapter *adapter) { struct net_device *netdev = adapter->netdev; - u32 if_flags; + u32 cap_flags, en_flags; int status; - if_flags = BE_IF_FLAGS_BROADCAST | BE_IF_FLAGS_PROMISCUOUS | - BE_IF_FLAGS_MCAST_PROMISCUOUS | BE_IF_FLAGS_UNTAGGED | - BE_IF_FLAGS_PASS_L3L4_ERRORS; - status = be_cmd_if_create(adapter, if_flags, netdev->dev_addr, - false/* pmac_invalid */, &adapter->if_handle, - &adapter->pmac_id); + cap_flags = BE_IF_FLAGS_UNTAGGED | BE_IF_FLAGS_BROADCAST | + BE_IF_FLAGS_MCAST_PROMISCUOUS | + BE_IF_FLAGS_PROMISCUOUS | + BE_IF_FLAGS_PASS_L3L4_ERRORS; + en_flags = BE_IF_FLAGS_UNTAGGED | BE_IF_FLAGS_BROADCAST | + BE_IF_FLAGS_PASS_L3L4_ERRORS; + + status = be_cmd_if_create(adapter, cap_flags, en_flags, + netdev->dev_addr, false/* pmac_invalid */, + &adapter->if_handle, &adapter->pmac_id); if (status != 0) goto do_none; - status = be_tx_queues_create(adapter); if (status != 0) goto if_destroy; @@ -2055,6 +2058,10 @@ static int be_hw_up(struct be_adapter *adapter) if (status) return status; + status = be_cmd_reset_function(adapter); + if (status) + return status; + status = be_cmd_get_fw_ver(adapter, adapter->fw_ver); if (status) return status; @@ -2108,10 +2115,6 @@ static int __devinit be_probe(struct pci_dev *pdev, if (status) goto free_netdev; - status = be_cmd_reset_function(adapter); - if (status) - goto ctrl_clean; - status = be_stats_init(adapter); if (status) goto ctrl_clean; diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c index 9c950bb5e90c..f7d9ac8324cb 100644 --- a/drivers/net/ethoc.c +++ b/drivers/net/ethoc.c @@ -223,24 +223,25 @@ struct ethoc_bd { u32 addr; }; -static u32 ethoc_read(struct ethoc *dev, loff_t offset) +static inline u32 ethoc_read(struct ethoc *dev, loff_t offset) { return ioread32(dev->iobase + offset); } -static void ethoc_write(struct ethoc *dev, loff_t offset, u32 data) +static inline void ethoc_write(struct ethoc *dev, loff_t offset, u32 data) { iowrite32(data, dev->iobase + offset); } -static void ethoc_read_bd(struct ethoc *dev, int index, struct ethoc_bd *bd) +static inline void ethoc_read_bd(struct ethoc *dev, int index, + struct ethoc_bd *bd) { loff_t offset = ETHOC_BD_BASE + (index * sizeof(struct ethoc_bd)); bd->stat = ethoc_read(dev, offset + 0); bd->addr = ethoc_read(dev, offset + 4); } -static void ethoc_write_bd(struct ethoc *dev, int index, +static inline void ethoc_write_bd(struct ethoc *dev, int index, const struct ethoc_bd *bd) { loff_t offset = ETHOC_BD_BASE + (index * sizeof(struct ethoc_bd)); @@ -248,33 +249,33 @@ static void ethoc_write_bd(struct ethoc *dev, int index, ethoc_write(dev, offset + 4, bd->addr); } -static void ethoc_enable_irq(struct ethoc *dev, u32 mask) +static inline void ethoc_enable_irq(struct ethoc *dev, u32 mask) { u32 imask = ethoc_read(dev, INT_MASK); imask |= mask; ethoc_write(dev, INT_MASK, imask); } -static void ethoc_disable_irq(struct ethoc *dev, u32 mask) +static inline void ethoc_disable_irq(struct ethoc *dev, u32 mask) { u32 imask = ethoc_read(dev, INT_MASK); imask &= ~mask; ethoc_write(dev, INT_MASK, imask); } -static void ethoc_ack_irq(struct ethoc *dev, u32 mask) +static inline void ethoc_ack_irq(struct ethoc *dev, u32 mask) { ethoc_write(dev, INT_SOURCE, mask); } -static void ethoc_enable_rx_and_tx(struct ethoc *dev) +static inline void ethoc_enable_rx_and_tx(struct ethoc *dev) { u32 mode = ethoc_read(dev, MODER); mode |= MODER_RXEN | MODER_TXEN; ethoc_write(dev, MODER, mode); } -static void ethoc_disable_rx_and_tx(struct ethoc *dev) +static inline void ethoc_disable_rx_and_tx(struct ethoc *dev) { u32 mode = ethoc_read(dev, MODER); mode &= ~(MODER_RXEN | MODER_TXEN); @@ -508,7 +509,7 @@ static irqreturn_t ethoc_interrupt(int irq, void *dev_id) return IRQ_NONE; } - ethoc_ack_irq(priv, INT_MASK_ALL); + ethoc_ack_irq(priv, pending); if (pending & INT_MASK_BUSY) { dev_err(&dev->dev, "packet dropped\n"); diff --git a/drivers/net/fec.c b/drivers/net/fec.c index 29234380e6c6..16a1d58419d9 100644 --- a/drivers/net/fec.c +++ b/drivers/net/fec.c @@ -1654,7 +1654,7 @@ static const struct net_device_ops fec_netdev_ops = { * * index is only used in legacy code */ -int __init fec_enet_init(struct net_device *dev, int index) +static int fec_enet_init(struct net_device *dev, int index) { struct fec_enet_private *fep = netdev_priv(dev); struct bufdesc *cbd_base; diff --git a/drivers/net/ks8851.c b/drivers/net/ks8851.c index 237835864357..a23f739d222f 100644 --- a/drivers/net/ks8851.c +++ b/drivers/net/ks8851.c @@ -171,6 +171,36 @@ static void ks8851_wrreg16(struct ks8851_net *ks, unsigned reg, unsigned val) } /** + * ks8851_wrreg8 - write 8bit register value to chip + * @ks: The chip state + * @reg: The register address + * @val: The value to write + * + * Issue a write to put the value @val into the register specified in @reg. + */ +static void ks8851_wrreg8(struct ks8851_net *ks, unsigned reg, unsigned val) +{ + struct spi_transfer *xfer = &ks->spi_xfer1; + struct spi_message *msg = &ks->spi_msg1; + __le16 txb[2]; + int ret; + int bit; + + bit = 1 << (reg & 3); + + txb[0] = cpu_to_le16(MK_OP(bit, reg) | KS_SPIOP_WR); + txb[1] = val; + + xfer->tx_buf = txb; + xfer->rx_buf = NULL; + xfer->len = 3; + + ret = spi_sync(ks->spidev, msg); + if (ret < 0) + ks_err(ks, "spi_sync() failed\n"); +} + +/** * ks8851_rx_1msg - select whether to use one or two messages for spi read * @ks: The device structure * @@ -322,13 +352,12 @@ static void ks8851_soft_reset(struct ks8851_net *ks, unsigned op) static int ks8851_write_mac_addr(struct net_device *dev) { struct ks8851_net *ks = netdev_priv(dev); - u16 *mcp = (u16 *)dev->dev_addr; + int i; mutex_lock(&ks->lock); - ks8851_wrreg16(ks, KS_MARL, mcp[0]); - ks8851_wrreg16(ks, KS_MARM, mcp[1]); - ks8851_wrreg16(ks, KS_MARH, mcp[2]); + for (i = 0; i < ETH_ALEN; i++) + ks8851_wrreg8(ks, KS_MAR(i), dev->dev_addr[i]); mutex_unlock(&ks->lock); @@ -951,7 +980,7 @@ static void ks8851_set_rx_mode(struct net_device *dev) mcptr = mcptr->next; } - rxctrl.rxcr1 = RXCR1_RXME | RXCR1_RXAE | RXCR1_RXPAFMA; + rxctrl.rxcr1 = RXCR1_RXME | RXCR1_RXPAFMA; } else { /* just accept broadcast / unicast */ rxctrl.rxcr1 = RXCR1_RXPAFMA; @@ -1239,6 +1268,9 @@ static int __devinit ks8851_probe(struct spi_device *spi) ndev->netdev_ops = &ks8851_netdev_ops; ndev->irq = spi->irq; + /* issue a global soft reset to reset the device. */ + ks8851_soft_reset(ks, GRR_GSR); + /* simple check for a valid chip being connected to the bus */ if ((ks8851_rdreg16(ks, KS_CIDER) & ~CIDER_REV_MASK) != CIDER_ID) { diff --git a/drivers/net/ks8851.h b/drivers/net/ks8851.h index 85abe147afbf..f52c312cc356 100644 --- a/drivers/net/ks8851.h +++ b/drivers/net/ks8851.h @@ -16,6 +16,7 @@ #define CCR_32PIN (1 << 0) /* MAC address registers */ +#define KS_MAR(_m) 0x15 - (_m) #define KS_MARL 0x10 #define KS_MARM 0x12 #define KS_MARH 0x14 diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c index 5dd7225b178e..291a505fd4fc 100644 --- a/drivers/net/mlx4/main.c +++ b/drivers/net/mlx4/main.c @@ -1282,6 +1282,7 @@ static struct pci_device_id mlx4_pci_table[] = { { PCI_VDEVICE(MELLANOX, 0x6372) }, /* MT25458 ConnectX EN 10GBASE-T 10GigE */ { PCI_VDEVICE(MELLANOX, 0x675a) }, /* MT25458 ConnectX EN 10GBASE-T+Gen2 10GigE */ { PCI_VDEVICE(MELLANOX, 0x6764) }, /* MT26468 ConnectX EN 10GigE PCIe gen2*/ + { PCI_VDEVICE(MELLANOX, 0x6746) }, /* MT26438 ConnectX EN 40GigE PCIe gen2 5GT/s */ { PCI_VDEVICE(MELLANOX, 0x676e) }, /* MT26478 ConnectX2 40GigE PCIe gen2 */ { 0, } }; diff --git a/drivers/net/niu.c b/drivers/net/niu.c index f9364d0678f2..d6c7ac68f6ea 100644 --- a/drivers/net/niu.c +++ b/drivers/net/niu.c @@ -3545,7 +3545,7 @@ static int niu_process_rx_pkt(struct napi_struct *napi, struct niu *np, rp->rcr_index = index; skb_reserve(skb, NET_IP_ALIGN); - __pskb_pull_tail(skb, min(len, NIU_RXPULL_MAX)); + __pskb_pull_tail(skb, min(len, VLAN_ETH_HLEN)); rp->rx_packets++; rp->rx_bytes += skb->len; diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 8d009760277c..3709d6af9abf 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -22,7 +22,6 @@ #include <linux/ethtool.h> #include <linux/module.h> #include <linux/virtio.h> -#include <linux/virtio_ids.h> #include <linux/virtio_net.h> #include <linux/scatterlist.h> #include <linux/if_vlan.h> @@ -454,7 +453,7 @@ static unsigned int free_old_xmit_skbs(struct virtnet_info *vi) vi->dev->stats.tx_bytes += skb->len; vi->dev->stats.tx_packets++; tot_sgs += skb_vnet_hdr(skb)->num_sg; - kfree_skb(skb); + dev_kfree_skb_any(skb); } return tot_sgs; } diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index 6a16f76f277e..004353a46af0 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -481,7 +481,8 @@ vmxnet3_rq_alloc_rx_buf(struct vmxnet3_rx_queue *rq, u32 ring_idx, } rq->uncommitted[ring_idx] += num_allocated; - dprintk(KERN_ERR "alloc_rx_buf: %d allocated, next2fill %u, next2comp " + dev_dbg(&adapter->netdev->dev, + "alloc_rx_buf: %d allocated, next2fill %u, next2comp " "%u, uncommited %u\n", num_allocated, ring->next2fill, ring->next2comp, rq->uncommitted[ring_idx]); @@ -539,7 +540,8 @@ vmxnet3_map_pkt(struct sk_buff *skb, struct vmxnet3_tx_ctx *ctx, tbi = tq->buf_info + tq->tx_ring.next2fill; tbi->map_type = VMXNET3_MAP_NONE; - dprintk(KERN_ERR "txd[%u]: 0x%Lx 0x%x 0x%x\n", + dev_dbg(&adapter->netdev->dev, + "txd[%u]: 0x%Lx 0x%x 0x%x\n", tq->tx_ring.next2fill, ctx->sop_txd->txd.addr, ctx->sop_txd->dword[2], ctx->sop_txd->dword[3]); vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring); @@ -572,7 +574,8 @@ vmxnet3_map_pkt(struct sk_buff *skb, struct vmxnet3_tx_ctx *ctx, gdesc->dword[2] = dw2 | buf_size; gdesc->dword[3] = 0; - dprintk(KERN_ERR "txd[%u]: 0x%Lx 0x%x 0x%x\n", + dev_dbg(&adapter->netdev->dev, + "txd[%u]: 0x%Lx 0x%x 0x%x\n", tq->tx_ring.next2fill, gdesc->txd.addr, gdesc->dword[2], gdesc->dword[3]); vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring); @@ -600,7 +603,8 @@ vmxnet3_map_pkt(struct sk_buff *skb, struct vmxnet3_tx_ctx *ctx, gdesc->dword[2] = dw2 | frag->size; gdesc->dword[3] = 0; - dprintk(KERN_ERR "txd[%u]: 0x%llu %u %u\n", + dev_dbg(&adapter->netdev->dev, + "txd[%u]: 0x%llu %u %u\n", tq->tx_ring.next2fill, gdesc->txd.addr, gdesc->dword[2], gdesc->dword[3]); vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring); @@ -697,7 +701,8 @@ vmxnet3_parse_and_copy_hdr(struct sk_buff *skb, struct vmxnet3_tx_queue *tq, tdd = tq->data_ring.base + tq->tx_ring.next2fill; memcpy(tdd->data, skb->data, ctx->copy_size); - dprintk(KERN_ERR "copy %u bytes to dataRing[%u]\n", + dev_dbg(&adapter->netdev->dev, + "copy %u bytes to dataRing[%u]\n", ctx->copy_size, tq->tx_ring.next2fill); return 1; @@ -808,7 +813,8 @@ vmxnet3_tq_xmit(struct sk_buff *skb, struct vmxnet3_tx_queue *tq, if (count > vmxnet3_cmd_ring_desc_avail(&tq->tx_ring)) { tq->stats.tx_ring_full++; - dprintk(KERN_ERR "tx queue stopped on %s, next2comp %u" + dev_dbg(&adapter->netdev->dev, + "tx queue stopped on %s, next2comp %u" " next2fill %u\n", adapter->netdev->name, tq->tx_ring.next2comp, tq->tx_ring.next2fill); @@ -853,7 +859,8 @@ vmxnet3_tq_xmit(struct sk_buff *skb, struct vmxnet3_tx_queue *tq, /* finally flips the GEN bit of the SOP desc */ gdesc->dword[2] ^= VMXNET3_TXD_GEN; - dprintk(KERN_ERR "txd[%u]: SOP 0x%Lx 0x%x 0x%x\n", + dev_dbg(&adapter->netdev->dev, + "txd[%u]: SOP 0x%Lx 0x%x 0x%x\n", (u32)((union Vmxnet3_GenericDesc *)ctx.sop_txd - tq->tx_ring.base), gdesc->txd.addr, gdesc->dword[2], gdesc->dword[3]); @@ -990,7 +997,8 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq, if (unlikely(rcd->len == 0)) { /* Pretend the rx buffer is skipped. */ BUG_ON(!(rcd->sop && rcd->eop)); - dprintk(KERN_ERR "rxRing[%u][%u] 0 length\n", + dev_dbg(&adapter->netdev->dev, + "rxRing[%u][%u] 0 length\n", ring_idx, idx); goto rcd_done; } @@ -1683,7 +1691,8 @@ vmxnet3_activate_dev(struct vmxnet3_adapter *adapter) int err; u32 ret; - dprintk(KERN_ERR "%s: skb_buf_size %d, rx_buf_per_pkt %d, ring sizes" + dev_dbg(&adapter->netdev->dev, + "%s: skb_buf_size %d, rx_buf_per_pkt %d, ring sizes" " %u %u %u\n", adapter->netdev->name, adapter->skb_buf_size, adapter->rx_buf_per_pkt, adapter->tx_queue.tx_ring.size, adapter->rx_queue.rx_ring[0].size, diff --git a/drivers/net/vmxnet3/vmxnet3_int.h b/drivers/net/vmxnet3/vmxnet3_int.h index 6bb91576e999..3c0d70d58111 100644 --- a/drivers/net/vmxnet3/vmxnet3_int.h +++ b/drivers/net/vmxnet3/vmxnet3_int.h @@ -30,6 +30,7 @@ #include <linux/types.h> #include <linux/ethtool.h> #include <linux/delay.h> +#include <linux/device.h> #include <linux/netdevice.h> #include <linux/pci.h> #include <linux/ethtool.h> @@ -59,7 +60,6 @@ #include <linux/if_vlan.h> #include <linux/if_arp.h> #include <linux/inetdevice.h> -#include <linux/dst.h> #include "vmxnet3_defs.h" diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index 88cd58eb3b9f..1c88c2ea59aa 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -2879,7 +2879,7 @@ static int write_essid(struct file *file, const char __user *buffer, unsigned long count, void *data) { static char proc_essid[33]; - int len = count; + unsigned int len = count; if (len > 32) len = 32; diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c index bacaa536fd51..4b22ba568b19 100644 --- a/drivers/of/of_mdio.c +++ b/drivers/of/of_mdio.c @@ -97,6 +97,12 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np) } EXPORT_SYMBOL(of_mdiobus_register); +/* Helper function for of_phy_find_device */ +static int of_phy_match(struct device *dev, void *phy_np) +{ + return dev_archdata_get_node(&dev->archdata) == phy_np; +} + /** * of_phy_find_device - Give a PHY node, find the phy_device * @phy_np: Pointer to the phy's device tree node @@ -106,15 +112,10 @@ EXPORT_SYMBOL(of_mdiobus_register); struct phy_device *of_phy_find_device(struct device_node *phy_np) { struct device *d; - int match(struct device *dev, void *phy_np) - { - return dev_archdata_get_node(&dev->archdata) == phy_np; - } - if (!phy_np) return NULL; - d = bus_find_device(&mdio_bus_type, NULL, phy_np, match); + d = bus_find_device(&mdio_bus_type, NULL, phy_np, of_phy_match); return d ? to_phy_device(d) : NULL; } EXPORT_SYMBOL(of_phy_find_device); diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 0959430534b2..cb1a027eb552 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -299,17 +299,8 @@ static struct resource *find_free_bus_resource(struct pci_bus *bus, unsigned lon r = bus->resource[i]; if (r == &ioport_resource || r == &iomem_resource) continue; - if (r && (r->flags & type_mask) == type) { - if (!r->parent) - return r; - /* - * if there is no child under that, we should release - * and use it. don't need to reset it, pbus_size_* will - * set it again - */ - if (!r->child && !release_resource(r)) - return r; - } + if (r && (r->flags & type_mask) == type && !r->parent) + return r; } return NULL; } diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c index 4a110b7b2673..6c4a4fc83630 100644 --- a/drivers/pcmcia/cistpl.c +++ b/drivers/pcmcia/cistpl.c @@ -1463,7 +1463,9 @@ int pccard_read_tuple(struct pcmcia_socket *s, unsigned int function, cisdata_t return -ENOMEM; } tuple.DesiredTuple = code; - tuple.Attributes = TUPLE_RETURN_COMMON; + tuple.Attributes = 0; + if (function == BIND_FN_ALL) + tuple.Attributes = TUPLE_RETURN_COMMON; ret = pccard_get_first_tuple(s, function, &tuple); if (ret != 0) goto done; @@ -1490,7 +1492,7 @@ EXPORT_SYMBOL(pccard_read_tuple); ======================================================================*/ -int pccard_validate_cis(struct pcmcia_socket *s, unsigned int function, unsigned int *info) +int pccard_validate_cis(struct pcmcia_socket *s, unsigned int *info) { tuple_t *tuple; cisparse_t *p; @@ -1515,30 +1517,30 @@ int pccard_validate_cis(struct pcmcia_socket *s, unsigned int function, unsigned count = reserved = 0; tuple->DesiredTuple = RETURN_FIRST_TUPLE; tuple->Attributes = TUPLE_RETURN_COMMON; - ret = pccard_get_first_tuple(s, function, tuple); + ret = pccard_get_first_tuple(s, BIND_FN_ALL, tuple); if (ret != 0) goto done; /* First tuple should be DEVICE; we should really have either that or a CFTABLE_ENTRY of some sort */ if ((tuple->TupleCode == CISTPL_DEVICE) || - (pccard_read_tuple(s, function, CISTPL_CFTABLE_ENTRY, p) == 0) || - (pccard_read_tuple(s, function, CISTPL_CFTABLE_ENTRY_CB, p) == 0)) + (pccard_read_tuple(s, BIND_FN_ALL, CISTPL_CFTABLE_ENTRY, p) == 0) || + (pccard_read_tuple(s, BIND_FN_ALL, CISTPL_CFTABLE_ENTRY_CB, p) == 0)) dev_ok++; /* All cards should have a MANFID tuple, and/or a VERS_1 or VERS_2 tuple, for card identification. Certain old D-Link and Linksys cards have only a broken VERS_2 tuple; hence the bogus test. */ - if ((pccard_read_tuple(s, function, CISTPL_MANFID, p) == 0) || - (pccard_read_tuple(s, function, CISTPL_VERS_1, p) == 0) || - (pccard_read_tuple(s, function, CISTPL_VERS_2, p) != -ENOSPC)) + if ((pccard_read_tuple(s, BIND_FN_ALL, CISTPL_MANFID, p) == 0) || + (pccard_read_tuple(s, BIND_FN_ALL, CISTPL_VERS_1, p) == 0) || + (pccard_read_tuple(s, BIND_FN_ALL, CISTPL_VERS_2, p) != -ENOSPC)) ident_ok++; if (!dev_ok && !ident_ok) goto done; for (count = 1; count < MAX_TUPLES; count++) { - ret = pccard_get_next_tuple(s, function, tuple); + ret = pccard_get_next_tuple(s, BIND_FN_ALL, tuple); if (ret != 0) break; if (((tuple->TupleCode > 0x23) && (tuple->TupleCode < 0x40)) || diff --git a/drivers/pcmcia/cs_internal.h b/drivers/pcmcia/cs_internal.h index 79615e6d540b..1f4098f1354d 100644 --- a/drivers/pcmcia/cs_internal.h +++ b/drivers/pcmcia/cs_internal.h @@ -197,8 +197,7 @@ int pccard_read_tuple(struct pcmcia_socket *s, unsigned int function, cisdata_t code, void *parse); int pcmcia_replace_cis(struct pcmcia_socket *s, const u8 *data, const size_t len); -int pccard_validate_cis(struct pcmcia_socket *s, unsigned int function, - unsigned int *count); +int pccard_validate_cis(struct pcmcia_socket *s, unsigned int *count); /* rsrc_mgr.c */ int pcmcia_validate_mem(struct pcmcia_socket *s); diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 9f300d3cb125..f5b7079f13d3 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -547,7 +547,7 @@ static int pcmcia_device_query(struct pcmcia_device *p_dev) if (!vers1) return -ENOMEM; - if (!pccard_read_tuple(p_dev->socket, p_dev->func, + if (!pccard_read_tuple(p_dev->socket, BIND_FN_ALL, CISTPL_MANFID, &manf_id)) { p_dev->manf_id = manf_id.manf; p_dev->card_id = manf_id.card; @@ -581,9 +581,9 @@ static int pcmcia_device_query(struct pcmcia_device *p_dev) kfree(devgeo); } - if (!pccard_read_tuple(p_dev->socket, p_dev->func, CISTPL_VERS_1, + if (!pccard_read_tuple(p_dev->socket, BIND_FN_ALL, CISTPL_VERS_1, vers1)) { - for (i=0; i < vers1->ns; i++) { + for (i = 0; i < min_t(unsigned int, 4, vers1->ns); i++) { char *tmp; unsigned int length; @@ -733,7 +733,7 @@ static int pcmcia_card_add(struct pcmcia_socket *s) return -EAGAIN; /* try again, but later... */ } - ret = pccard_validate_cis(s, BIND_FN_ALL, &no_chains); + ret = pccard_validate_cis(s, &no_chains); if (ret || !no_chains) { ds_dev_dbg(0, &s->dev, "invalid CIS or invalid resources\n"); return -ENODEV; diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c index b906abe26ad0..a4aacb830b80 100644 --- a/drivers/pcmcia/i82365.c +++ b/drivers/pcmcia/i82365.c @@ -1053,8 +1053,8 @@ static int i365_set_io_map(u_short sock, struct pccard_io_map *io) u_char map, ioctl; debug(1, "SetIOMap(%d, %d, %#2.2x, %d ns, " - "%#x-%#x)\n", sock, io->map, io->flags, - io->speed, io->start, io->stop); + "%#llx-%#llx)\n", sock, io->map, io->flags, io->speed, + (unsigned long long)io->start, (unsigned long long)io->stop); map = io->map; if ((map > 1) || (io->start > 0xffff) || (io->stop > 0xffff) || (io->stop < io->start)) return -EINVAL; diff --git a/drivers/pcmcia/m32r_cfc.c b/drivers/pcmcia/m32r_cfc.c index d1d89c4491ad..7dfbee1dcd76 100644 --- a/drivers/pcmcia/m32r_cfc.c +++ b/drivers/pcmcia/m32r_cfc.c @@ -537,8 +537,9 @@ static int _pcc_set_io_map(u_short sock, struct pccard_io_map *io) u_char map; debug(3, "m32r_cfc: SetIOMap(%d, %d, %#2.2x, %d ns, " - "%#lx-%#lx)\n", sock, io->map, io->flags, - io->speed, io->start, io->stop); + "%#llx-%#llx)\n", sock, io->map, io->flags, + io->speed, (unsigned long long)io->start, + (unsigned long long)io->stop); map = io->map; return 0; @@ -554,8 +555,9 @@ static int _pcc_set_mem_map(u_short sock, struct pccard_mem_map *mem) pcc_socket_t *t = &socket[sock]; debug(3, "m32r_cfc: SetMemMap(%d, %d, %#2.2x, %d ns, " - "%#lx, %#x)\n", sock, map, mem->flags, - mem->speed, mem->static_start, mem->card_start); + "%#llx, %#x)\n", sock, map, mem->flags, + mem->speed, (unsigned long long)mem->static_start, + mem->card_start); /* * sanity check diff --git a/drivers/pcmcia/m32r_pcc.c b/drivers/pcmcia/m32r_pcc.c index a0655839c8d3..c6524f99ccc3 100644 --- a/drivers/pcmcia/m32r_pcc.c +++ b/drivers/pcmcia/m32r_pcc.c @@ -492,8 +492,9 @@ static int _pcc_set_io_map(u_short sock, struct pccard_io_map *io) u_char map; debug(3, "m32r-pcc: SetIOMap(%d, %d, %#2.2x, %d ns, " - "%#x-%#x)\n", sock, io->map, io->flags, - io->speed, io->start, io->stop); + "%#llx-%#llx)\n", sock, io->map, io->flags, + io->speed, (unsigned long long)io->start, + (unsigned long long)io->stop); map = io->map; return 0; @@ -515,8 +516,9 @@ static int _pcc_set_mem_map(u_short sock, struct pccard_mem_map *mem) #endif debug(3, "m32r-pcc: SetMemMap(%d, %d, %#2.2x, %d ns, " - "%#lx, %#x)\n", sock, map, mem->flags, - mem->speed, mem->static_start, mem->card_start); + "%#llx, %#x)\n", sock, map, mem->flags, + mem->speed, (unsigned long long)mem->static_start, + mem->card_start); /* * sanity check diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c index c69f2c4fe520..403559ba49dd 100644 --- a/drivers/pcmcia/m8xx_pcmcia.c +++ b/drivers/pcmcia/m8xx_pcmcia.c @@ -975,8 +975,9 @@ static int m8xx_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io) #define M8XX_BASE (PCMCIA_IO_WIN_BASE + io->start) dprintk("SetIOMap(%d, %d, %#2.2x, %d ns, " - "%#4.4x-%#4.4x)\n", lsock, io->map, io->flags, - io->speed, io->start, io->stop); + "%#4.4llx-%#4.4llx)\n", lsock, io->map, io->flags, + io->speed, (unsigned long long)io->start, + (unsigned long long)io->stop); if ((io->map >= PCMCIA_IO_WIN_NO) || (io->start > 0xffff) || (io->stop > 0xffff) || (io->stop < io->start)) @@ -1055,8 +1056,9 @@ static int m8xx_set_mem_map(struct pcmcia_socket *sock, pcmconf8xx_t *pcmcia = s->pcmcia; dprintk("SetMemMap(%d, %d, %#2.2x, %d ns, " - "%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags, - mem->speed, mem->static_start, mem->card_start); + "%#5.5llx, %#5.5x)\n", lsock, mem->map, mem->flags, + mem->speed, (unsigned long long)mem->static_start, + mem->card_start); if ((mem->map >= PCMCIA_MEM_WIN_NO) // || ((mem->s) >= PCMCIA_MEM_WIN_SIZE) @@ -1107,8 +1109,9 @@ static int m8xx_set_mem_map(struct pcmcia_socket *sock, } dprintk("SetMemMap(%d, %d, %#2.2x, %d ns, " - "%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags, - mem->speed, mem->static_start, mem->card_start); + "%#5.5llx, %#5.5x)\n", lsock, mem->map, mem->flags, + mem->speed, (unsigned long long)mem->static_start, + mem->card_start); /* copy the struct and modify the copy */ diff --git a/drivers/pcmcia/pcmcia_ioctl.c b/drivers/pcmcia/pcmcia_ioctl.c index 32c44040c1e8..30cf71d2ee23 100644 --- a/drivers/pcmcia/pcmcia_ioctl.c +++ b/drivers/pcmcia/pcmcia_ioctl.c @@ -881,7 +881,7 @@ static int ds_ioctl(struct inode * inode, struct file * file, mutex_lock(&s->skt_mutex); pcmcia_validate_mem(s); mutex_unlock(&s->skt_mutex); - ret = pccard_validate_cis(s, BIND_FN_ALL, &buf->cisinfo.Chains); + ret = pccard_validate_cis(s, &buf->cisinfo.Chains); break; case DS_SUSPEND_CARD: ret = pcmcia_suspend_card(s); diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c index 1c39d3438f20..70a33468bcd0 100644 --- a/drivers/pcmcia/pd6729.c +++ b/drivers/pcmcia/pd6729.c @@ -641,6 +641,12 @@ static int __devinit pd6729_pci_probe(struct pci_dev *dev, if ((ret = pci_enable_device(dev))) goto err_out_free_mem; + if (!pci_resource_start(dev, 0)) { + printk(KERN_INFO "pd6729: refusing to load the driver " + "as the io_base is 0.\n"); + goto err_out_free_mem; + } + printk(KERN_INFO "pd6729: Cirrus PD6729 PCI to PCMCIA Bridge " "at 0x%llx on irq %d\n", (unsigned long long)pci_resource_start(dev, 0), dev->irq); diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c index 9ca22c7aafb2..7039f3cf5b77 100644 --- a/drivers/pcmcia/rsrc_nonstatic.c +++ b/drivers/pcmcia/rsrc_nonstatic.c @@ -206,6 +206,7 @@ static void do_io_probe(struct pcmcia_socket *s, unsigned int base, /* First, what does a floating port look like? */ b = kzalloc(256, GFP_KERNEL); if (!b) { + printk("\n"); dev_printk(KERN_ERR, &s->dev, "do_io_probe: unable to kmalloc 256 bytes"); return; @@ -275,7 +276,7 @@ static int readable(struct pcmcia_socket *s, struct resource *res, s->cis_mem.res = res; s->cis_virt = ioremap(res->start, s->map_size); if (s->cis_virt) { - ret = pccard_validate_cis(s, BIND_FN_ALL, count); + ret = pccard_validate_cis(s, count); /* invalidate mapping and CIS cache */ iounmap(s->cis_virt); s->cis_virt = NULL; diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c index 163cf98e2386..ef7e9e58782b 100644 --- a/drivers/pcmcia/soc_common.c +++ b/drivers/pcmcia/soc_common.c @@ -336,8 +336,9 @@ soc_common_pcmcia_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *m struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock); unsigned short speed = map->speed; - debug(skt, 2, "map %u speed %u start 0x%08x stop 0x%08x\n", - map->map, map->speed, map->start, map->stop); + debug(skt, 2, "map %u speed %u start 0x%08llx stop 0x%08llx\n", + map->map, map->speed, (unsigned long long)map->start, + (unsigned long long)map->stop); debug(skt, 2, "flags: %s%s%s%s%s%s%s%s\n", (map->flags==0)?"<NONE>":"", (map->flags&MAP_ACTIVE)?"ACTIVE ":"", diff --git a/drivers/pcmcia/socket_sysfs.c b/drivers/pcmcia/socket_sysfs.c index ff9a3bb3c88d..78d5aab542f7 100644 --- a/drivers/pcmcia/socket_sysfs.c +++ b/drivers/pcmcia/socket_sysfs.c @@ -300,7 +300,7 @@ static ssize_t pccard_show_cis(struct kobject *kobj, if (!(s->state & SOCKET_PRESENT)) return -ENODEV; - if (pccard_validate_cis(s, BIND_FN_ALL, &chains)) + if (pccard_validate_cis(s, &chains)) return -EIO; if (!chains) return -ENODATA; diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c index 582413fcb62f..6918849d511e 100644 --- a/drivers/pcmcia/tcic.c +++ b/drivers/pcmcia/tcic.c @@ -732,8 +732,8 @@ static int tcic_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io) u_short base, len, ioctl; debug(1, "SetIOMap(%d, %d, %#2.2x, %d ns, " - "%#x-%#x)\n", psock, io->map, io->flags, - io->speed, io->start, io->stop); + "%#llx-%#llx)\n", psock, io->map, io->flags, io->speed, + (unsigned long long)io->start, (unsigned long long)io->stop); if ((io->map > 1) || (io->start > 0xffff) || (io->stop > 0xffff) || (io->stop < io->start)) return -EINVAL; tcic_setw(TCIC_ADDR+2, TCIC_ADR2_INDREG | (psock << TCIC_SS_SHFT)); diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c index 0f79f3af4f54..2889e5f2dfd3 100644 --- a/drivers/s390/scsi/zfcp_aux.c +++ b/drivers/s390/scsi/zfcp_aux.c @@ -128,12 +128,13 @@ out_ccwdev: static void __init zfcp_init_device_setup(char *devstr) { char *token; - char *str; + char *str, *str_saved; char busid[ZFCP_BUS_ID_SIZE]; u64 wwpn, lun; /* duplicate devstr and keep the original for sysfs presentation*/ - str = kmalloc(strlen(devstr) + 1, GFP_KERNEL); + str_saved = kmalloc(strlen(devstr) + 1, GFP_KERNEL); + str = str_saved; if (!str) return; @@ -152,12 +153,12 @@ static void __init zfcp_init_device_setup(char *devstr) if (!token || strict_strtoull(token, 0, (unsigned long long *) &lun)) goto err_out; - kfree(str); + kfree(str_saved); zfcp_init_device_configure(busid, wwpn, lun); return; - err_out: - kfree(str); +err_out: + kfree(str_saved); pr_err("%s is not a valid SCSI device\n", devstr); } diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index 73d366ba31e5..f73e2180f333 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -858,10 +858,7 @@ static int zfcp_erp_port_strategy_open_common(struct zfcp_erp_action *act) if (fc_host_port_type(adapter->scsi_host) == FC_PORTTYPE_PTP) return zfcp_erp_open_ptp_port(act); if (!port->d_id) { - zfcp_port_get(port); - if (!queue_work(adapter->work_queue, - &port->gid_pn_work)) - zfcp_port_put(port); + zfcp_fc_trigger_did_lookup(port); return ZFCP_ERP_EXIT; } return zfcp_erp_port_strategy_open_port(act); @@ -869,12 +866,11 @@ static int zfcp_erp_port_strategy_open_common(struct zfcp_erp_action *act) case ZFCP_ERP_STEP_PORT_OPENING: /* D_ID might have changed during open */ if (p_status & ZFCP_STATUS_COMMON_OPEN) { - if (port->d_id) - return ZFCP_ERP_SUCCEEDED; - else { - act->step = ZFCP_ERP_STEP_PORT_CLOSING; - return ZFCP_ERP_CONTINUES; + if (!port->d_id) { + zfcp_fc_trigger_did_lookup(port); + return ZFCP_ERP_EXIT; } + return ZFCP_ERP_SUCCEEDED; } if (port->d_id && !(p_status & ZFCP_STATUS_COMMON_NOESC)) { port->d_id = 0; @@ -889,19 +885,21 @@ static int zfcp_erp_port_strategy_open_common(struct zfcp_erp_action *act) static int zfcp_erp_port_strategy(struct zfcp_erp_action *erp_action) { struct zfcp_port *port = erp_action->port; + int p_status = atomic_read(&port->status); - if (atomic_read(&port->status) & ZFCP_STATUS_COMMON_NOESC) + if ((p_status & ZFCP_STATUS_COMMON_NOESC) && + !(p_status & ZFCP_STATUS_COMMON_OPEN)) goto close_init_done; switch (erp_action->step) { case ZFCP_ERP_STEP_UNINITIALIZED: zfcp_erp_port_strategy_clearstati(port); - if (atomic_read(&port->status) & ZFCP_STATUS_COMMON_OPEN) + if (p_status & ZFCP_STATUS_COMMON_OPEN) return zfcp_erp_port_strategy_close(erp_action); break; case ZFCP_ERP_STEP_PORT_CLOSING: - if (atomic_read(&port->status) & ZFCP_STATUS_COMMON_OPEN) + if (p_status & ZFCP_STATUS_COMMON_OPEN) return ZFCP_ERP_FAILED; break; } diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h index 629edec70405..b3f28deb4505 100644 --- a/drivers/s390/scsi/zfcp_ext.h +++ b/drivers/s390/scsi/zfcp_ext.h @@ -96,6 +96,7 @@ extern int zfcp_fc_scan_ports(struct zfcp_adapter *); extern void _zfcp_fc_scan_ports_later(struct work_struct *); extern void zfcp_fc_incoming_els(struct zfcp_fsf_req *); extern void zfcp_fc_port_did_lookup(struct work_struct *); +extern void zfcp_fc_trigger_did_lookup(struct zfcp_port *); extern void zfcp_fc_plogi_evaluate(struct zfcp_port *, struct fsf_plogi *); extern void zfcp_fc_test_link(struct zfcp_port *); extern void zfcp_fc_link_test_work(struct work_struct *); diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index 722f22de8753..df23bcead23d 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -361,6 +361,17 @@ out: } /** + * zfcp_fc_trigger_did_lookup - trigger the d_id lookup using a GID_PN request + * @port: The zfcp_port to lookup the d_id for. + */ +void zfcp_fc_trigger_did_lookup(struct zfcp_port *port) +{ + zfcp_port_get(port); + if (!queue_work(port->adapter->work_queue, &port->gid_pn_work)) + zfcp_port_put(port); +} + +/** * zfcp_fc_plogi_evaluate - evaluate PLOGI playload * @port: zfcp_port structure * @plogi: plogi payload diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 38a7e4a6b639..4e41baa0c141 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -1079,7 +1079,7 @@ static int zfcp_fsf_setup_ct_els(struct zfcp_fsf_req *req, /* common settings for ct/gs and els requests */ req->qtcb->bottom.support.service_class = FSF_CLASS_3; req->qtcb->bottom.support.timeout = 2 * R_A_TOV; - zfcp_fsf_start_timer(req, 2 * R_A_TOV + 10); + zfcp_fsf_start_timer(req, (2 * R_A_TOV + 10) * HZ); return 0; } @@ -1475,9 +1475,16 @@ static void zfcp_fsf_open_port_handler(struct zfcp_fsf_req *req) plogi = (struct fsf_plogi *) req->qtcb->bottom.support.els; if (req->qtcb->bottom.support.els1_length >= FSF_PLOGI_MIN_LEN) { - if (plogi->serv_param.wwpn != port->wwpn) + if (plogi->serv_param.wwpn != port->wwpn) { port->d_id = 0; - else { + dev_warn(&port->adapter->ccw_device->dev, + "A port opened with WWPN 0x%016Lx " + "returned data that identifies it as " + "WWPN 0x%016Lx\n", + (unsigned long long) port->wwpn, + (unsigned long long) + plogi->serv_param.wwpn); + } else { port->wwnn = plogi->serv_param.wwnn; zfcp_fc_plogi_evaluate(port, plogi); } diff --git a/drivers/s390/scsi/zfcp_sysfs.c b/drivers/s390/scsi/zfcp_sysfs.c index 079a8cf518a3..d31000886ca8 100644 --- a/drivers/s390/scsi/zfcp_sysfs.c +++ b/drivers/s390/scsi/zfcp_sysfs.c @@ -224,6 +224,7 @@ static ssize_t zfcp_sysfs_unit_add_store(struct device *dev, zfcp_erp_unit_reopen(unit, 0, "syuas_1", NULL); zfcp_erp_wait(unit->port->adapter); + flush_work(&unit->scsi_work); zfcp_unit_put(unit); out: mutex_unlock(&zfcp_data.config_mutex); diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c index b6af63ca980b..7d1aac31ec8d 100644 --- a/drivers/scsi/dpt_i2o.c +++ b/drivers/scsi/dpt_i2o.c @@ -1918,6 +1918,10 @@ static int adpt_i2o_passthru(adpt_hba* pHba, u32 __user *arg) } size = size>>16; size *= 4; + if (size > MAX_MESSAGE_SIZE) { + rcode = EINVAL; + goto cleanup; + } /* Copy in the user's I2O command */ if (copy_from_user (msg, user_msg, size)) { rcode = -EFAULT; diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index c44783801402..0547a7f44d42 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -317,6 +317,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget, out_device_destroy: scsi_device_set_state(sdev, SDEV_DEL); transport_destroy_device(&sdev->sdev_gendev); + put_device(&sdev->sdev_dev); put_device(&sdev->sdev_gendev); out: if (display_failure_msg) @@ -957,6 +958,7 @@ static inline void scsi_destroy_sdev(struct scsi_device *sdev) if (sdev->host->hostt->slave_destroy) sdev->host->hostt->slave_destroy(sdev); transport_destroy_device(&sdev->sdev_gendev); + put_device(&sdev->sdev_dev); put_device(&sdev->sdev_gendev); } diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index fde54537d715..5c7eb63a19d1 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -864,10 +864,6 @@ int scsi_sysfs_add_sdev(struct scsi_device *sdev) goto clean_device; } - /* take a reference for the sdev_dev; this is - * released by the sdev_class .release */ - get_device(&sdev->sdev_gendev); - /* create queue files, which may be writable, depending on the host */ if (sdev->host->hostt->change_queue_depth) error = device_create_file(&sdev->sdev_gendev, &sdev_attr_queue_depth_rw); @@ -917,6 +913,7 @@ int scsi_sysfs_add_sdev(struct scsi_device *sdev) device_del(&sdev->sdev_gendev); transport_destroy_device(&sdev->sdev_gendev); + put_device(&sdev->sdev_dev); put_device(&sdev->sdev_gendev); return error; @@ -1065,7 +1062,7 @@ void scsi_sysfs_device_initialize(struct scsi_device *sdev) sdev->host->host_no, sdev->channel, sdev->id, sdev->lun); device_initialize(&sdev->sdev_dev); - sdev->sdev_dev.parent = &sdev->sdev_gendev; + sdev->sdev_dev.parent = get_device(&sdev->sdev_gendev); sdev->sdev_dev.class = &sdev_class; dev_set_name(&sdev->sdev_dev, "%d:%d:%d:%d", sdev->host->host_no, sdev->channel, sdev->id, sdev->lun); diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index e7108e75653d..42e8550cd2b6 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -1561,11 +1561,16 @@ enum pci_board_num_t { pbn_exar_XR17C152, pbn_exar_XR17C154, pbn_exar_XR17C158, + pbn_exar_ibm_saturn, pbn_pasemi_1682M, pbn_ni8430_2, pbn_ni8430_4, pbn_ni8430_8, pbn_ni8430_16, + pbn_ADDIDATA_PCIe_1_3906250, + pbn_ADDIDATA_PCIe_2_3906250, + pbn_ADDIDATA_PCIe_4_3906250, + pbn_ADDIDATA_PCIe_8_3906250, }; /* @@ -2146,6 +2151,13 @@ static struct pciserial_board pci_boards[] __devinitdata = { .base_baud = 921600, .uart_offset = 0x200, }, + [pbn_exar_ibm_saturn] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 0x200, + }, + /* * PA Semi PWRficient PA6T-1682M on-chip UART */ @@ -2185,6 +2197,37 @@ static struct pciserial_board pci_boards[] __devinitdata = { .uart_offset = 0x10, .first_offset = 0x800, }, + /* + * ADDI-DATA GmbH PCI-Express communication cards <info@addi-data.com> + */ + [pbn_ADDIDATA_PCIe_1_3906250] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ADDIDATA_PCIe_2_3906250] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ADDIDATA_PCIe_4_3906250] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ADDIDATA_PCIe_8_3906250] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, }; static const struct pci_device_id softmodem_blacklist[] = { @@ -2649,6 +2692,9 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_SUBVENDOR_ID_CONNECT_TECH, PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_485, 0, 0, pbn_b0_8_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, + PCI_VENDOR_ID_IBM, PCI_SUBDEVICE_ID_IBM_SATURN_SERIAL_ONE_PORT, + 0, 0, pbn_exar_ibm_saturn }, { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530, PCI_ANY_ID, PCI_ANY_ID, 0, 0, @@ -3556,6 +3602,38 @@ static struct pci_device_id serial_pci_tbl[] = { 0, pbn_b0_8_115200 }, + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7500, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_4_3906250 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7420, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_2_3906250 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7300, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_1_3906250 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7800, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_8_3906250 }, + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835, PCI_VENDOR_ID_IBM, 0x0299, 0, 0, pbn_b0_bt_2_115200 }, diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 3551c5cb7094..9d948bccafaf 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -1531,7 +1531,7 @@ static int __devinit atmel_serial_probe(struct platform_device *pdev) void *data; int ret; - BUILD_BUG_ON(!is_power_of_2(ATMEL_SERIAL_RINGSIZE)); + BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1)); port = &atmel_ports[pdev->id]; port->backup_imr = 0; diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index d7bcd074d383..7ce9e9f567a3 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -705,7 +705,7 @@ mpc52xx_uart_verify_port(struct uart_port *port, struct serial_struct *ser) return -EINVAL; if ((ser->irq != port->irq) || - (ser->io_type != SERIAL_IO_MEM) || + (ser->io_type != UPIO_MEM) || (ser->baud_base != port->uartclk) || (ser->iomem_base != (void *)port->mapbase) || (ser->hub6 != 0)) diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 33351312327f..a18e3c5dd82e 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -223,6 +223,7 @@ config USB_OTG config USB_GADGET_PXA25X boolean "PXA 25x or IXP 4xx" depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX + select USB_OTG_UTILS help Intel's PXA 25x series XScale ARM-5TE processors include an integrated full speed USB 1.1 device controller. The diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c index 200c22f55130..9dd588042880 100644 --- a/drivers/virtio/virtio_balloon.c +++ b/drivers/virtio/virtio_balloon.c @@ -19,7 +19,6 @@ */ //#define DEBUG #include <linux/virtio.h> -#include <linux/virtio_ids.h> #include <linux/virtio_balloon.h> #include <linux/swap.h> #include <linux/kthread.h> @@ -248,7 +247,7 @@ out: return err; } -static void virtballoon_remove(struct virtio_device *vdev) +static void __devexit virtballoon_remove(struct virtio_device *vdev) { struct virtio_balloon *vb = vdev->priv; diff --git a/fs/Kconfig b/fs/Kconfig index d4bf8caad8d0..2126078a38ed 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -135,8 +135,8 @@ config TMPFS_POSIX_ACL config HUGETLBFS bool "HugeTLB file system support" - depends on X86 || IA64 || PPC64 || SPARC64 || (SUPERH && MMU) || \ - (S390 && 64BIT) || SYS_SUPPORTS_HUGETLBFS || BROKEN + depends on X86 || IA64 || PPC_BOOK3S_64 || SPARC64 || (S390 && 64BIT) || \ + SYS_SUPPORTS_HUGETLBFS || BROKEN help hugetlbfs is a filesystem backing for HugeTLB pages, based on ramfs. For architectures that support it, say Y here and read diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 43003e0bef18..b09098079916 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1577,7 +1577,8 @@ cifs_get_tcp_session(struct smb_vol *volume_info) out_err: if (tcp_ses) { - kfree(tcp_ses->hostname); + if (!IS_ERR(tcp_ses->hostname)) + kfree(tcp_ses->hostname); if (tcp_ses->ssocket) sock_release(tcp_ses->ssocket); kfree(tcp_ses); diff --git a/fs/hfs/btree.c b/fs/hfs/btree.c index 9b9d6395bad3..052f214ea6f0 100644 --- a/fs/hfs/btree.c +++ b/fs/hfs/btree.c @@ -58,6 +58,11 @@ struct hfs_btree *hfs_btree_open(struct super_block *sb, u32 id, btree_keycmp ke } unlock_new_inode(tree->inode); + if (!HFS_I(tree->inode)->first_blocks) { + printk(KERN_ERR "hfs: invalid btree extent records (0 size).\n"); + goto free_inode; + } + mapping = tree->inode->i_mapping; page = read_mapping_page(mapping, 0, NULL); if (IS_ERR(page)) diff --git a/fs/hfsplus/wrapper.c b/fs/hfsplus/wrapper.c index 175d08eacc86..bed78ac8f6d1 100644 --- a/fs/hfsplus/wrapper.c +++ b/fs/hfsplus/wrapper.c @@ -99,6 +99,10 @@ int hfsplus_read_wrapper(struct super_block *sb) if (hfsplus_get_last_session(sb, &part_start, &part_size)) return -EINVAL; + if ((u64)part_start + part_size > 0x100000000ULL) { + pr_err("hfs: volumes larger than 2TB are not supported yet\n"); + return -EINVAL; + } while (1) { bh = sb_bread512(sb, part_start + HFSPLUS_VOLHEAD_SECTOR, vhdr); if (!bh) diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index 32062c33c859..7cb298525eef 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1536,6 +1536,8 @@ nfs_link(struct dentry *old_dentry, struct inode *dir, struct dentry *dentry) old_dentry->d_parent->d_name.name, old_dentry->d_name.name, dentry->d_parent->d_name.name, dentry->d_name.name); + nfs_inode_return_delegation(inode); + d_drop(dentry); error = NFS_PROTO(dir)->link(inode, dir, &dentry->d_name); if (error == 0) { diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c index 6c3210099d51..e1d415e97849 100644 --- a/fs/nfs/direct.c +++ b/fs/nfs/direct.c @@ -457,6 +457,7 @@ static void nfs_direct_write_reschedule(struct nfs_direct_req *dreq) }; struct rpc_task_setup task_setup_data = { .rpc_client = NFS_CLIENT(inode), + .rpc_message = &msg, .callback_ops = &nfs_write_direct_ops, .workqueue = nfsiod_workqueue, .flags = RPC_TASK_ASYNC, diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index ed7c269e2514..ff37454fa783 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -72,12 +72,17 @@ static int _nfs4_proc_getattr(struct nfs_server *server, struct nfs_fh *fhandle, /* Prevent leaks of NFSv4 errors into userland */ static int nfs4_map_errors(int err) { - if (err < -1000) { + if (err >= -1000) + return err; + switch (err) { + case -NFS4ERR_RESOURCE: + return -EREMOTEIO; + default: dprintk("%s could not handle NFSv4 error %d\n", __func__, -err); - return -EIO; + break; } - return err; + return -EIO; } /* @@ -3060,9 +3065,6 @@ static void nfs4_renew_done(struct rpc_task *task, void *data) if (time_before(clp->cl_last_renewal,timestamp)) clp->cl_last_renewal = timestamp; spin_unlock(&clp->cl_lock); - dprintk("%s calling put_rpccred on rpc_cred %p\n", __func__, - task->tk_msg.rpc_cred); - put_rpccred(task->tk_msg.rpc_cred); } static const struct rpc_call_ops nfs4_renew_ops = { @@ -4877,7 +4879,6 @@ void nfs41_sequence_call_done(struct rpc_task *task, void *data) nfs41_sequence_free_slot(clp, task->tk_msg.rpc_resp); dprintk("%s rpc_cred %p\n", __func__, task->tk_msg.rpc_cred); - put_rpccred(task->tk_msg.rpc_cred); kfree(task->tk_msg.rpc_argp); kfree(task->tk_msg.rpc_resp); diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index 83ad47cbdd8a..20b4e30e6c82 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -5681,7 +5681,6 @@ static struct { { NFS4ERR_SERVERFAULT, -ESERVERFAULT }, { NFS4ERR_BADTYPE, -EBADTYPE }, { NFS4ERR_LOCKED, -EAGAIN }, - { NFS4ERR_RESOURCE, -EREMOTEIO }, { NFS4ERR_SYMLINK, -ELOOP }, { NFS4ERR_OP_ILLEGAL, -EOPNOTSUPP }, { NFS4ERR_DEADLOCK, -EDEADLK }, diff --git a/fs/proc/meminfo.c b/fs/proc/meminfo.c index c7bff4f603ff..a65239cfd97e 100644 --- a/fs/proc/meminfo.c +++ b/fs/proc/meminfo.c @@ -99,7 +99,7 @@ static int meminfo_proc_show(struct seq_file *m, void *v) "VmallocUsed: %8lu kB\n" "VmallocChunk: %8lu kB\n" #ifdef CONFIG_MEMORY_FAILURE - "HardwareCorrupted: %8lu kB\n" + "HardwareCorrupted: %5lu kB\n" #endif , K(i.totalram), diff --git a/fs/xfs/quota/xfs_qm_syscalls.c b/fs/xfs/quota/xfs_qm_syscalls.c index 4e4276b956e8..5d1a3b98a6e6 100644 --- a/fs/xfs/quota/xfs_qm_syscalls.c +++ b/fs/xfs/quota/xfs_qm_syscalls.c @@ -876,7 +876,6 @@ xfs_dqrele_inode( ip->i_gdquot = NULL; } xfs_iput(ip, XFS_ILOCK_EXCL); - IRELE(ip); return 0; } diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 3f384d4b163a..1feed71551c9 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -364,6 +364,7 @@ unifdef-y += utsname.h unifdef-y += videodev2.h unifdef-y += videodev.h unifdef-y += virtio_config.h +unifdef-y += virtio_ids.h unifdef-y += virtio_blk.h unifdef-y += virtio_net.h unifdef-y += virtio_9p.h diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 44717eb47639..79a2340d83cd 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -291,8 +291,15 @@ struct global_attr { int cpufreq_get_policy(struct cpufreq_policy *policy, unsigned int cpu); int cpufreq_update_policy(unsigned int cpu); +#ifdef CONFIG_CPU_FREQ /* query the current CPU frequency (in kHz). If zero, cpufreq couldn't detect it */ unsigned int cpufreq_get(unsigned int cpu); +#else +static inline unsigned int cpufreq_get(unsigned int cpu) +{ + return 0; +} +#endif /* query the last known CPU freq (in kHz). If zero, cpufreq couldn't detect it */ #ifdef CONFIG_CPU_FREQ diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 86257a412732..b0f0f3851cd4 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -482,6 +482,9 @@ #define PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM_PCIE 0x0361 #define PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL 0x252 +#define PCI_SUBVENDOR_ID_IBM 0x1014 +#define PCI_SUBDEVICE_ID_IBM_SATURN_SERIAL_ONE_PORT 0x03d4 + #define PCI_VENDOR_ID_UNISYS 0x1018 #define PCI_DEVICE_ID_UNISYS_DMA_DIRECTOR 0x001C @@ -2160,6 +2163,10 @@ #define PCI_DEVICE_ID_ADDIDATA_APCI7420_3 0x700D #define PCI_DEVICE_ID_ADDIDATA_APCI7300_3 0x700E #define PCI_DEVICE_ID_ADDIDATA_APCI7800_3 0x700F +#define PCI_DEVICE_ID_ADDIDATA_APCIe7300 0x7010 +#define PCI_DEVICE_ID_ADDIDATA_APCIe7420 0x7011 +#define PCI_DEVICE_ID_ADDIDATA_APCIe7500 0x7012 +#define PCI_DEVICE_ID_ADDIDATA_APCIe7800 0x7013 #define PCI_VENDOR_ID_PDC 0x15e9 diff --git a/include/linux/prctl.h b/include/linux/prctl.h index 931150566ade..a3baeb2c2161 100644 --- a/include/linux/prctl.h +++ b/include/linux/prctl.h @@ -88,6 +88,18 @@ #define PR_TASK_PERF_EVENTS_DISABLE 31 #define PR_TASK_PERF_EVENTS_ENABLE 32 +/* + * Set early/late kill mode for hwpoison memory corruption. + * This influences when the process gets killed on a memory corruption. + */ #define PR_MCE_KILL 33 +# define PR_MCE_KILL_CLEAR 0 +# define PR_MCE_KILL_SET 1 + +# define PR_MCE_KILL_LATE 0 +# define PR_MCE_KILL_EARLY 1 +# define PR_MCE_KILL_DEFAULT 2 + +#define PR_MCE_KILL_GET 34 #endif /* _LINUX_PRCTL_H */ diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h index 46e9ab3ee6e1..9642c6bcb399 100644 --- a/include/linux/rcutree.h +++ b/include/linux/rcutree.h @@ -76,11 +76,7 @@ static inline void __rcu_read_unlock_bh(void) extern void call_rcu_sched(struct rcu_head *head, void (*func)(struct rcu_head *rcu)); - -static inline void synchronize_rcu_expedited(void) -{ - synchronize_sched_expedited(); -} +extern void synchronize_rcu_expedited(void); static inline void synchronize_rcu_bh_expedited(void) { diff --git a/include/linux/string.h b/include/linux/string.h index 489019ef1694..b8508868d5ad 100644 --- a/include/linux/string.h +++ b/include/linux/string.h @@ -62,7 +62,7 @@ extern char * strnchr(const char *, size_t, int); #ifndef __HAVE_ARCH_STRRCHR extern char * strrchr(const char *,int); #endif -extern char * strstrip(char *); +extern char * __must_check strstrip(char *); #ifndef __HAVE_ARCH_STRSTR extern char * strstr(const char *,const char *); #endif diff --git a/include/linux/topology.h b/include/linux/topology.h index fc0bf3edeb67..57e63579bfdd 100644 --- a/include/linux/topology.h +++ b/include/linux/topology.h @@ -129,7 +129,7 @@ int arch_update_cpu_topology(void); | 1*SD_BALANCE_FORK \ | 0*SD_BALANCE_WAKE \ | 1*SD_WAKE_AFFINE \ - | 1*SD_PREFER_LOCAL \ + | 0*SD_PREFER_LOCAL \ | 0*SD_SHARE_CPUPOWER \ | 1*SD_SHARE_PKG_RESOURCES \ | 0*SD_SERIALIZE \ @@ -162,7 +162,7 @@ int arch_update_cpu_topology(void); | 1*SD_BALANCE_FORK \ | 0*SD_BALANCE_WAKE \ | 1*SD_WAKE_AFFINE \ - | 1*SD_PREFER_LOCAL \ + | 0*SD_PREFER_LOCAL \ | 0*SD_SHARE_CPUPOWER \ | 0*SD_SHARE_PKG_RESOURCES \ | 0*SD_SERIALIZE \ diff --git a/include/linux/virtio_9p.h b/include/linux/virtio_9p.h index ea7226a45acb..095e10d148b4 100644 --- a/include/linux/virtio_9p.h +++ b/include/linux/virtio_9p.h @@ -2,6 +2,7 @@ #define _LINUX_VIRTIO_9P_H /* This header is BSD licensed so anyone can use the definitions to implement * compatible drivers/servers. */ +#include <linux/virtio_ids.h> #include <linux/virtio_config.h> /* Maximum number of virtio channels per partition (1 for now) */ diff --git a/include/linux/virtio_balloon.h b/include/linux/virtio_balloon.h index 09d730085060..1418f048cb34 100644 --- a/include/linux/virtio_balloon.h +++ b/include/linux/virtio_balloon.h @@ -2,6 +2,7 @@ #define _LINUX_VIRTIO_BALLOON_H /* This header is BSD licensed so anyone can use the definitions to implement * compatible drivers/servers. */ +#include <linux/virtio_ids.h> #include <linux/virtio_config.h> /* The feature bitmap for virtio balloon */ diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h index 15cb666581d7..fd294c56d571 100644 --- a/include/linux/virtio_blk.h +++ b/include/linux/virtio_blk.h @@ -3,6 +3,7 @@ /* This header is BSD licensed so anyone can use the definitions to implement * compatible drivers/servers. */ #include <linux/types.h> +#include <linux/virtio_ids.h> #include <linux/virtio_config.h> /* Feature bits */ @@ -13,11 +14,8 @@ #define VIRTIO_BLK_F_RO 5 /* Disk is read-only */ #define VIRTIO_BLK_F_BLK_SIZE 6 /* Block size of disk is available*/ #define VIRTIO_BLK_F_SCSI 7 /* Supports scsi command passthru */ -#define VIRTIO_BLK_F_IDENTIFY 8 /* ATA IDENTIFY supported */ #define VIRTIO_BLK_F_FLUSH 9 /* Cache flush command support */ -#define VIRTIO_BLK_ID_BYTES (sizeof(__u16[256])) /* IDENTIFY DATA */ - struct virtio_blk_config { /* The capacity (in 512-byte sectors). */ __u64 capacity; @@ -33,7 +31,6 @@ struct virtio_blk_config { } geometry; /* block size of device (if VIRTIO_BLK_F_BLK_SIZE) */ __u32 blk_size; - __u8 identify[VIRTIO_BLK_ID_BYTES]; } __attribute__((packed)); /* diff --git a/include/linux/virtio_console.h b/include/linux/virtio_console.h index b5f519806014..fe885174cc1f 100644 --- a/include/linux/virtio_console.h +++ b/include/linux/virtio_console.h @@ -1,6 +1,7 @@ #ifndef _LINUX_VIRTIO_CONSOLE_H #define _LINUX_VIRTIO_CONSOLE_H #include <linux/types.h> +#include <linux/virtio_ids.h> #include <linux/virtio_config.h> /* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so * anyone can use the definitions to implement compatible drivers/servers. */ diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h index 1f41734bbb77..085e42298ce5 100644 --- a/include/linux/virtio_net.h +++ b/include/linux/virtio_net.h @@ -3,6 +3,7 @@ /* This header is BSD licensed so anyone can use the definitions to implement * compatible drivers/servers. */ #include <linux/types.h> +#include <linux/virtio_ids.h> #include <linux/virtio_config.h> #include <linux/if_ether.h> diff --git a/include/linux/virtio_rng.h b/include/linux/virtio_rng.h index 48121c3c434b..c4d5de896f0c 100644 --- a/include/linux/virtio_rng.h +++ b/include/linux/virtio_rng.h @@ -2,6 +2,7 @@ #define _LINUX_VIRTIO_RNG_H /* This header is BSD licensed so anyone can use the definitions to implement * compatible drivers/servers. */ +#include <linux/virtio_ids.h> #include <linux/virtio_config.h> #endif /* _LINUX_VIRTIO_RNG_H */ diff --git a/include/net/inet_timewait_sock.h b/include/net/inet_timewait_sock.h index b63b80fac567..f93ad90a601b 100644 --- a/include/net/inet_timewait_sock.h +++ b/include/net/inet_timewait_sock.h @@ -130,11 +130,11 @@ struct inet_timewait_sock { __u16 tw_num; kmemcheck_bitfield_begin(flags); /* And these are ours. */ - __u8 tw_ipv6only:1, - tw_transparent:1; - /* 14 bits hole, try to pack */ + unsigned int tw_ipv6only : 1, + tw_transparent : 1, + tw_pad : 14, /* 14 bits hole */ + tw_ipv6_offset : 16; kmemcheck_bitfield_end(flags); - __u16 tw_ipv6_offset; unsigned long tw_ttd; struct inet_bind_bucket *tw_tb; struct hlist_node tw_death_node; diff --git a/init/Kconfig b/init/Kconfig index 09c5c6431f42..f51586406d62 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -297,7 +297,7 @@ config AUDIT config AUDITSYSCALL bool "Enable system-call auditing support" - depends on AUDIT && (X86 || PPC || PPC64 || S390 || IA64 || UML || SPARC64|| SUPERH) + depends on AUDIT && (X86 || PPC || S390 || IA64 || UML || SPARC64 || SUPERH) default y if SECURITY_SELINUX help Enable low-overhead system-call auditing infrastructure that diff --git a/kernel/cgroup.c b/kernel/cgroup.c index ca83b73fba19..0249f4be9b5c 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -1710,14 +1710,13 @@ static ssize_t cgroup_write_X64(struct cgroup *cgrp, struct cftype *cft, return -EFAULT; buffer[nbytes] = 0; /* nul-terminate */ - strstrip(buffer); if (cft->write_u64) { - u64 val = simple_strtoull(buffer, &end, 0); + u64 val = simple_strtoull(strstrip(buffer), &end, 0); if (*end) return -EINVAL; retval = cft->write_u64(cgrp, cft, val); } else { - s64 val = simple_strtoll(buffer, &end, 0); + s64 val = simple_strtoll(strstrip(buffer), &end, 0); if (*end) return -EINVAL; retval = cft->write_s64(cgrp, cft, val); @@ -1753,8 +1752,7 @@ static ssize_t cgroup_write_string(struct cgroup *cgrp, struct cftype *cft, } buffer[nbytes] = 0; /* nul-terminate */ - strstrip(buffer); - retval = cft->write_string(cgrp, cft, buffer); + retval = cft->write_string(cgrp, cft, strstrip(buffer)); if (!retval) retval = nbytes; out: diff --git a/kernel/exit.c b/kernel/exit.c index e61891f80123..f7864ac2ecc1 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -359,10 +359,8 @@ void __set_special_pids(struct pid *pid) { struct task_struct *curr = current->group_leader; - if (task_session(curr) != pid) { + if (task_session(curr) != pid) change_pid(curr, PIDTYPE_SID, pid); - proc_sid_connector(curr); - } if (task_pgrp(curr) != pid) change_pid(curr, PIDTYPE_PGID, pid); diff --git a/kernel/futex.c b/kernel/futex.c index 4949d336d88d..642f3bbaacc7 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -150,7 +150,8 @@ static struct futex_hash_bucket *hash_futex(union futex_key *key) */ static inline int match_futex(union futex_key *key1, union futex_key *key2) { - return (key1->both.word == key2->both.word + return (key1 && key2 + && key1->both.word == key2->both.word && key1->both.ptr == key2->both.ptr && key1->both.offset == key2->both.offset); } @@ -1028,7 +1029,6 @@ static inline void requeue_pi_wake_futex(struct futex_q *q, union futex_key *key, struct futex_hash_bucket *hb) { - drop_futex_key_refs(&q->key); get_futex_key_refs(key); q->key = *key; @@ -1226,6 +1226,7 @@ retry_private: */ if (ret == 1) { WARN_ON(pi_state); + drop_count++; task_count++; ret = get_futex_value_locked(&curval2, uaddr2); if (!ret) @@ -1304,6 +1305,7 @@ retry_private: if (ret == 1) { /* We got the lock. */ requeue_pi_wake_futex(this, &key2, hb2); + drop_count++; continue; } else if (ret) { /* -EDEADLK */ @@ -1791,6 +1793,7 @@ static int futex_wait(u32 __user *uaddr, int fshared, current->timer_slack_ns); } +retry: /* Prepare to wait on uaddr. */ ret = futex_wait_setup(uaddr, val, fshared, &q, &hb); if (ret) @@ -1808,9 +1811,14 @@ static int futex_wait(u32 __user *uaddr, int fshared, goto out_put_key; /* - * We expect signal_pending(current), but another thread may - * have handled it for us already. + * We expect signal_pending(current), but we might be the + * victim of a spurious wakeup as well. */ + if (!signal_pending(current)) { + put_futex_key(fshared, &q.key); + goto retry; + } + ret = -ERESTARTSYS; if (!abs_time) goto out_put_key; @@ -2118,9 +2126,11 @@ int handle_early_requeue_pi_wakeup(struct futex_hash_bucket *hb, */ plist_del(&q->list, &q->list.plist); + /* Handle spurious wakeups gracefully */ + ret = -EAGAIN; if (timeout && !timeout->task) ret = -ETIMEDOUT; - else + else if (signal_pending(current)) ret = -ERESTARTNOINTR; } return ret; @@ -2198,6 +2208,7 @@ static int futex_wait_requeue_pi(u32 __user *uaddr, int fshared, debug_rt_mutex_init_waiter(&rt_waiter); rt_waiter.task = NULL; +retry: key2 = FUTEX_KEY_INIT; ret = get_futex_key(uaddr2, fshared, &key2, VERIFY_WRITE); if (unlikely(ret != 0)) @@ -2292,6 +2303,9 @@ out_put_keys: out_key2: put_futex_key(fshared, &key2); + /* Spurious wakeup ? */ + if (ret == -EAGAIN) + goto retry; out: if (to) { hrtimer_cancel(&to->timer); diff --git a/kernel/perf_event.c b/kernel/perf_event.c index 9d0b5c665883..afb7ef3dbc44 100644 --- a/kernel/perf_event.c +++ b/kernel/perf_event.c @@ -1355,7 +1355,7 @@ static void perf_ctx_adjust_freq(struct perf_event_context *ctx) u64 interrupts, freq; spin_lock(&ctx->lock); - list_for_each_entry(event, &ctx->group_list, group_entry) { + list_for_each_entry_rcu(event, &ctx->event_list, event_entry) { if (event->state != PERF_EVENT_STATE_ACTIVE) continue; diff --git a/kernel/rcutree.c b/kernel/rcutree.c index 705f02ac7433..0536125b0497 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -913,7 +913,20 @@ static void __rcu_offline_cpu(int cpu, struct rcu_state *rsp) spin_unlock(&rnp->lock); /* irqs remain disabled. */ break; } - rcu_preempt_offline_tasks(rsp, rnp, rdp); + + /* + * If there was a task blocking the current grace period, + * and if all CPUs have checked in, we need to propagate + * the quiescent state up the rcu_node hierarchy. But that + * is inconvenient at the moment due to deadlock issues if + * this should end the current grace period. So set the + * offlined CPU's bit in ->qsmask in order to force the + * next force_quiescent_state() invocation to clean up this + * mess in a deadlock-free manner. + */ + if (rcu_preempt_offline_tasks(rsp, rnp, rdp) && !rnp->qsmask) + rnp->qsmask |= mask; + mask = rnp->grpmask; spin_unlock(&rnp->lock); /* irqs remain disabled. */ rnp = rnp->parent; @@ -958,7 +971,7 @@ static void rcu_offline_cpu(int cpu) * Invoke any RCU callbacks that have made it to the end of their grace * period. Thottle as specified by rdp->blimit. */ -static void rcu_do_batch(struct rcu_data *rdp) +static void rcu_do_batch(struct rcu_state *rsp, struct rcu_data *rdp) { unsigned long flags; struct rcu_head *next, *list, **tail; @@ -1011,6 +1024,13 @@ static void rcu_do_batch(struct rcu_data *rdp) if (rdp->blimit == LONG_MAX && rdp->qlen <= qlowmark) rdp->blimit = blimit; + /* Reset ->qlen_last_fqs_check trigger if enough CBs have drained. */ + if (rdp->qlen == 0 && rdp->qlen_last_fqs_check != 0) { + rdp->qlen_last_fqs_check = 0; + rdp->n_force_qs_snap = rsp->n_force_qs; + } else if (rdp->qlen < rdp->qlen_last_fqs_check - qhimark) + rdp->qlen_last_fqs_check = rdp->qlen; + local_irq_restore(flags); /* Re-raise the RCU softirq if there are callbacks remaining. */ @@ -1224,7 +1244,7 @@ __rcu_process_callbacks(struct rcu_state *rsp, struct rcu_data *rdp) } /* If there are callbacks ready, invoke them. */ - rcu_do_batch(rdp); + rcu_do_batch(rsp, rdp); } /* @@ -1288,10 +1308,20 @@ __call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu), rcu_start_gp(rsp, nestflag); /* releases rnp_root->lock. */ } - /* Force the grace period if too many callbacks or too long waiting. */ - if (unlikely(++rdp->qlen > qhimark)) { + /* + * Force the grace period if too many callbacks or too long waiting. + * Enforce hysteresis, and don't invoke force_quiescent_state() + * if some other CPU has recently done so. Also, don't bother + * invoking force_quiescent_state() if the newly enqueued callback + * is the only one waiting for a grace period to complete. + */ + if (unlikely(++rdp->qlen > rdp->qlen_last_fqs_check + qhimark)) { rdp->blimit = LONG_MAX; - force_quiescent_state(rsp, 0); + if (rsp->n_force_qs == rdp->n_force_qs_snap && + *rdp->nxttail[RCU_DONE_TAIL] != head) + force_quiescent_state(rsp, 0); + rdp->n_force_qs_snap = rsp->n_force_qs; + rdp->qlen_last_fqs_check = rdp->qlen; } else if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0) force_quiescent_state(rsp, 1); local_irq_restore(flags); @@ -1523,6 +1553,8 @@ rcu_init_percpu_data(int cpu, struct rcu_state *rsp, int preemptable) rdp->beenonline = 1; /* We have now been online. */ rdp->preemptable = preemptable; rdp->passed_quiesc_completed = lastcomp - 1; + rdp->qlen_last_fqs_check = 0; + rdp->n_force_qs_snap = rsp->n_force_qs; rdp->blimit = blimit; spin_unlock(&rnp->lock); /* irqs remain disabled. */ diff --git a/kernel/rcutree.h b/kernel/rcutree.h index b40ac5706040..1823c6e20609 100644 --- a/kernel/rcutree.h +++ b/kernel/rcutree.h @@ -167,6 +167,10 @@ struct rcu_data { struct rcu_head *nxtlist; struct rcu_head **nxttail[RCU_NEXT_SIZE]; long qlen; /* # of queued callbacks */ + long qlen_last_fqs_check; + /* qlen at last check for QS forcing */ + unsigned long n_force_qs_snap; + /* did other CPU force QS recently? */ long blimit; /* Upper limit on a processed batch */ #ifdef CONFIG_NO_HZ @@ -302,9 +306,9 @@ static void rcu_print_task_stall(struct rcu_node *rnp); #endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */ static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp); #ifdef CONFIG_HOTPLUG_CPU -static void rcu_preempt_offline_tasks(struct rcu_state *rsp, - struct rcu_node *rnp, - struct rcu_data *rdp); +static int rcu_preempt_offline_tasks(struct rcu_state *rsp, + struct rcu_node *rnp, + struct rcu_data *rdp); static void rcu_preempt_offline_cpu(int cpu); #endif /* #ifdef CONFIG_HOTPLUG_CPU */ static void rcu_preempt_check_callbacks(int cpu); diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h index c0cb783aa16a..ef2a58c2b9d5 100644 --- a/kernel/rcutree_plugin.h +++ b/kernel/rcutree_plugin.h @@ -304,21 +304,25 @@ static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp) * parent is to remove the need for rcu_read_unlock_special() to * make more than two attempts to acquire the target rcu_node's lock. * + * Returns 1 if there was previously a task blocking the current grace + * period on the specified rcu_node structure. + * * The caller must hold rnp->lock with irqs disabled. */ -static void rcu_preempt_offline_tasks(struct rcu_state *rsp, - struct rcu_node *rnp, - struct rcu_data *rdp) +static int rcu_preempt_offline_tasks(struct rcu_state *rsp, + struct rcu_node *rnp, + struct rcu_data *rdp) { int i; struct list_head *lp; struct list_head *lp_root; + int retval = rcu_preempted_readers(rnp); struct rcu_node *rnp_root = rcu_get_root(rsp); struct task_struct *tp; if (rnp == rnp_root) { WARN_ONCE(1, "Last CPU thought to be offlined?"); - return; /* Shouldn't happen: at least one CPU online. */ + return 0; /* Shouldn't happen: at least one CPU online. */ } WARN_ON_ONCE(rnp != rdp->mynode && (!list_empty(&rnp->blocked_tasks[0]) || @@ -342,6 +346,8 @@ static void rcu_preempt_offline_tasks(struct rcu_state *rsp, spin_unlock(&rnp_root->lock); /* irqs remain disabled */ } } + + return retval; } /* @@ -393,6 +399,17 @@ void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu)) EXPORT_SYMBOL_GPL(call_rcu); /* + * Wait for an rcu-preempt grace period. We are supposed to expedite the + * grace period, but this is the crude slow compatability hack, so just + * invoke synchronize_rcu(). + */ +void synchronize_rcu_expedited(void) +{ + synchronize_rcu(); +} +EXPORT_SYMBOL_GPL(synchronize_rcu_expedited); + +/* * Check to see if there is any immediate preemptable-RCU-related work * to be done. */ @@ -521,12 +538,15 @@ static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp) /* * Because preemptable RCU does not exist, it never needs to migrate - * tasks that were blocked within RCU read-side critical sections. + * tasks that were blocked within RCU read-side critical sections, and + * such non-existent tasks cannot possibly have been blocking the current + * grace period. */ -static void rcu_preempt_offline_tasks(struct rcu_state *rsp, - struct rcu_node *rnp, - struct rcu_data *rdp) +static int rcu_preempt_offline_tasks(struct rcu_state *rsp, + struct rcu_node *rnp, + struct rcu_data *rdp) { + return 0; } /* @@ -565,6 +585,16 @@ void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu)) EXPORT_SYMBOL_GPL(call_rcu); /* + * Wait for an rcu-preempt grace period, but make it happen quickly. + * But because preemptable RCU does not exist, map to rcu-sched. + */ +void synchronize_rcu_expedited(void) +{ + synchronize_sched_expedited(); +} +EXPORT_SYMBOL_GPL(synchronize_rcu_expedited); + +/* * Because preemptable RCU does not exist, it never has any work to do. */ static int rcu_preempt_pending(int cpu) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 4e777b47eeda..c32c3e643daa 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -861,12 +861,21 @@ wakeup_preempt_entity(struct sched_entity *curr, struct sched_entity *se); static struct sched_entity *pick_next_entity(struct cfs_rq *cfs_rq) { struct sched_entity *se = __pick_next_entity(cfs_rq); + struct sched_entity *buddy; - if (cfs_rq->next && wakeup_preempt_entity(cfs_rq->next, se) < 1) - return cfs_rq->next; + if (cfs_rq->next) { + buddy = cfs_rq->next; + cfs_rq->next = NULL; + if (wakeup_preempt_entity(buddy, se) < 1) + return buddy; + } - if (cfs_rq->last && wakeup_preempt_entity(cfs_rq->last, se) < 1) - return cfs_rq->last; + if (cfs_rq->last) { + buddy = cfs_rq->last; + cfs_rq->last = NULL; + if (wakeup_preempt_entity(buddy, se) < 1) + return buddy; + } return se; } @@ -1654,16 +1663,6 @@ static struct task_struct *pick_next_task_fair(struct rq *rq) do { se = pick_next_entity(cfs_rq); - /* - * If se was a buddy, clear it so that it will have to earn - * the favour again. - * - * If se was not a buddy, clear the buddies because neither - * was elegible to run, let them earn it again. - * - * IOW. unconditionally clear buddies. - */ - __clear_buddies(cfs_rq, NULL); set_next_entity(cfs_rq, se); cfs_rq = group_cfs_rq(se); } while (cfs_rq); diff --git a/kernel/sys.c b/kernel/sys.c index 255475d163e0..ce17760d9c51 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -1110,6 +1110,8 @@ SYSCALL_DEFINE0(setsid) err = session; out: write_unlock_irq(&tasklist_lock); + if (err > 0) + proc_sid_connector(group_leader); return err; } @@ -1546,24 +1548,37 @@ SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3, if (arg4 | arg5) return -EINVAL; switch (arg2) { - case 0: + case PR_MCE_KILL_CLEAR: if (arg3 != 0) return -EINVAL; current->flags &= ~PF_MCE_PROCESS; break; - case 1: + case PR_MCE_KILL_SET: current->flags |= PF_MCE_PROCESS; - if (arg3 != 0) + if (arg3 == PR_MCE_KILL_EARLY) current->flags |= PF_MCE_EARLY; - else + else if (arg3 == PR_MCE_KILL_LATE) current->flags &= ~PF_MCE_EARLY; + else if (arg3 == PR_MCE_KILL_DEFAULT) + current->flags &= + ~(PF_MCE_EARLY|PF_MCE_PROCESS); + else + return -EINVAL; break; default: return -EINVAL; } error = 0; break; - + case PR_MCE_KILL_GET: + if (arg2 | arg3 | arg4 | arg5) + return -EINVAL; + if (current->flags & PF_MCE_PROCESS) + error = (current->flags & PF_MCE_EARLY) ? + PR_MCE_KILL_EARLY : PR_MCE_KILL_LATE; + else + error = PR_MCE_KILL_DEFAULT; + break; default: error = -EINVAL; break; diff --git a/kernel/sysctl_check.c b/kernel/sysctl_check.c index b38423ca711a..b6e7aaea4604 100644 --- a/kernel/sysctl_check.c +++ b/kernel/sysctl_check.c @@ -1521,7 +1521,7 @@ int sysctl_check_table(struct nsproxy *namespaces, struct ctl_table *table) if (!table->ctl_name && table->strategy) set_fail(&fail, table, "Strategy without ctl_name"); #endif -#ifdef CONFIG_PROC_FS +#ifdef CONFIG_PROC_SYSCTL if (table->procname && !table->proc_handler) set_fail(&fail, table, "No proc_handler"); #endif diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 47cdd7e76f2b..12328147132c 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -685,21 +685,38 @@ EXPORT_SYMBOL(schedule_delayed_work_on); int schedule_on_each_cpu(work_func_t func) { int cpu; + int orig = -1; struct work_struct *works; works = alloc_percpu(struct work_struct); if (!works) return -ENOMEM; + /* + * when running in keventd don't schedule a work item on itself. + * Can just call directly because the work queue is already bound. + * This also is faster. + * Make this a generic parameter for other workqueues? + */ + if (current_is_keventd()) { + orig = raw_smp_processor_id(); + INIT_WORK(per_cpu_ptr(works, orig), func); + func(per_cpu_ptr(works, orig)); + } + get_online_cpus(); for_each_online_cpu(cpu) { struct work_struct *work = per_cpu_ptr(works, cpu); + if (cpu == orig) + continue; INIT_WORK(work, func); schedule_work_on(cpu, work); } - for_each_online_cpu(cpu) - flush_work(per_cpu_ptr(works, cpu)); + for_each_online_cpu(cpu) { + if (cpu != orig) + flush_work(per_cpu_ptr(works, cpu)); + } put_online_cpus(); free_percpu(works); return 0; diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 30df5865ecbe..234ceb10861f 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -392,7 +392,7 @@ config DEBUG_KMEMLEAK_TEST config DEBUG_PREEMPT bool "Debug preemptible kernel" - depends on DEBUG_KERNEL && PREEMPT && (TRACE_IRQFLAGS_SUPPORT || PPC64) + depends on DEBUG_KERNEL && PREEMPT && TRACE_IRQFLAGS_SUPPORT default y help If you say Y here then the kernel will use a debug variant of the diff --git a/mm/Kconfig b/mm/Kconfig index 57963c6063d1..fd3386242cf0 100644 --- a/mm/Kconfig +++ b/mm/Kconfig @@ -67,7 +67,7 @@ config DISCONTIGMEM config SPARSEMEM def_bool y - depends on SPARSEMEM_MANUAL + depends on (!SELECT_MEMORY_MODEL && ARCH_SPARSEMEM_ENABLE) || SPARSEMEM_MANUAL config FLATMEM def_bool y @@ -129,7 +129,7 @@ config MEMORY_HOTPLUG bool "Allow for memory hot-add" depends on SPARSEMEM || X86_64_ACPI_NUMA depends on HOTPLUG && !(HIBERNATION && !S390) && ARCH_ENABLE_MEMORY_HOTPLUG - depends on (IA64 || X86 || PPC64 || SUPERH || S390) + depends on (IA64 || X86 || PPC_BOOK3S_64 || SUPERH || S390) comment "Memory hotplug is currently incompatible with Software Suspend" depends on SPARSEMEM && HOTPLUG && HIBERNATION && !S390 diff --git a/mm/memory-failure.c b/mm/memory-failure.c index 729d4b15b645..dacc64183874 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -35,6 +35,7 @@ #include <linux/mm.h> #include <linux/page-flags.h> #include <linux/sched.h> +#include <linux/ksm.h> #include <linux/rmap.h> #include <linux/pagemap.h> #include <linux/swap.h> @@ -370,9 +371,6 @@ static int me_pagecache_clean(struct page *p, unsigned long pfn) int ret = FAILED; struct address_space *mapping; - if (!isolate_lru_page(p)) - page_cache_release(p); - /* * For anonymous pages we're done the only reference left * should be the one m_f() holds. @@ -498,30 +496,18 @@ static int me_pagecache_dirty(struct page *p, unsigned long pfn) */ static int me_swapcache_dirty(struct page *p, unsigned long pfn) { - int ret = FAILED; - ClearPageDirty(p); /* Trigger EIO in shmem: */ ClearPageUptodate(p); - if (!isolate_lru_page(p)) { - page_cache_release(p); - ret = DELAYED; - } - - return ret; + return DELAYED; } static int me_swapcache_clean(struct page *p, unsigned long pfn) { - int ret = FAILED; - - if (!isolate_lru_page(p)) { - page_cache_release(p); - ret = RECOVERED; - } delete_from_swap_cache(p); - return ret; + + return RECOVERED; } /* @@ -611,8 +597,6 @@ static struct page_state { { 0, 0, "unknown page state", me_unknown }, }; -#undef lru - static void action_result(unsigned long pfn, char *msg, int result) { struct page *page = NULL; @@ -629,13 +613,16 @@ static int page_action(struct page_state *ps, struct page *p, unsigned long pfn, int ref) { int result; + int count; result = ps->action(p, pfn); action_result(pfn, ps->msg, result); - if (page_count(p) != 1 + ref) + + count = page_count(p) - 1 - ref; + if (count != 0) printk(KERN_ERR "MCE %#lx: %s page still referenced by %d users\n", - pfn, ps->msg, page_count(p) - 1); + pfn, ps->msg, count); /* Could do more checks here if page looks ok */ /* @@ -661,12 +648,9 @@ static void hwpoison_user_mappings(struct page *p, unsigned long pfn, int i; int kill = 1; - if (PageReserved(p) || PageCompound(p) || PageSlab(p)) + if (PageReserved(p) || PageCompound(p) || PageSlab(p) || PageKsm(p)) return; - if (!PageLRU(p)) - lru_add_drain_all(); - /* * This check implies we don't kill processes if their pages * are in the swap cache early. Those are always late kills. @@ -738,6 +722,7 @@ static void hwpoison_user_mappings(struct page *p, unsigned long pfn, int __memory_failure(unsigned long pfn, int trapno, int ref) { + unsigned long lru_flag; struct page_state *ps; struct page *p; int res; @@ -775,6 +760,24 @@ int __memory_failure(unsigned long pfn, int trapno, int ref) } /* + * We ignore non-LRU pages for good reasons. + * - PG_locked is only well defined for LRU pages and a few others + * - to avoid races with __set_page_locked() + * - to avoid races with __SetPageSlab*() (and more non-atomic ops) + * The check (unnecessarily) ignores LRU pages being isolated and + * walked by the page reclaim code, however that's not a big loss. + */ + if (!PageLRU(p)) + lru_add_drain_all(); + lru_flag = p->flags & lru; + if (isolate_lru_page(p)) { + action_result(pfn, "non LRU", IGNORED); + put_page(p); + return -EBUSY; + } + page_cache_release(p); + + /* * Lock the page and wait for writeback to finish. * It's very difficult to mess with pages currently under IO * and in many cases impossible, so we just avoid it here. @@ -790,7 +793,7 @@ int __memory_failure(unsigned long pfn, int trapno, int ref) /* * Torn down by someone else? */ - if (PageLRU(p) && !PageSwapCache(p) && p->mapping == NULL) { + if ((lru_flag & lru) && !PageSwapCache(p) && p->mapping == NULL) { action_result(pfn, "already truncated LRU", IGNORED); res = 0; goto out; @@ -798,7 +801,7 @@ int __memory_failure(unsigned long pfn, int trapno, int ref) res = -EBUSY; for (ps = error_states;; ps++) { - if ((p->flags & ps->mask) == ps->res) { + if (((p->flags | lru_flag)& ps->mask) == ps->res) { res = page_action(ps, p, pfn, ref); break; } diff --git a/mm/memory.c b/mm/memory.c index 7e91b5f9f690..6ab19dd4a199 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -641,6 +641,7 @@ static int copy_pte_range(struct mm_struct *dst_mm, struct mm_struct *src_mm, pmd_t *dst_pmd, pmd_t *src_pmd, struct vm_area_struct *vma, unsigned long addr, unsigned long end) { + pte_t *orig_src_pte, *orig_dst_pte; pte_t *src_pte, *dst_pte; spinlock_t *src_ptl, *dst_ptl; int progress = 0; @@ -654,6 +655,8 @@ again: src_pte = pte_offset_map_nested(src_pmd, addr); src_ptl = pte_lockptr(src_mm, src_pmd); spin_lock_nested(src_ptl, SINGLE_DEPTH_NESTING); + orig_src_pte = src_pte; + orig_dst_pte = dst_pte; arch_enter_lazy_mmu_mode(); do { @@ -677,9 +680,9 @@ again: arch_leave_lazy_mmu_mode(); spin_unlock(src_ptl); - pte_unmap_nested(src_pte - 1); + pte_unmap_nested(orig_src_pte); add_mm_rss(dst_mm, rss[0], rss[1]); - pte_unmap_unlock(dst_pte - 1, dst_ptl); + pte_unmap_unlock(orig_dst_pte, dst_ptl); cond_resched(); if (addr != end) goto again; @@ -1820,10 +1823,10 @@ static int apply_to_pte_range(struct mm_struct *mm, pmd_t *pmd, token = pmd_pgtable(*pmd); do { - err = fn(pte, token, addr, data); + err = fn(pte++, token, addr, data); if (err) break; - } while (pte++, addr += PAGE_SIZE, addr != end); + } while (addr += PAGE_SIZE, addr != end); arch_leave_lazy_mmu_mode(); @@ -2539,7 +2542,7 @@ static int do_swap_page(struct mm_struct *mm, struct vm_area_struct *vma, } else if (PageHWPoison(page)) { ret = VM_FAULT_HWPOISON; delayacct_clear_flag(DELAYACCT_PF_SWAPIN); - goto out; + goto out_release; } lock_page(page); @@ -2611,6 +2614,7 @@ out_nomap: pte_unmap_unlock(page_table, ptl); out_page: unlock_page(page); +out_release: page_cache_release(page); return ret; } diff --git a/mm/mempolicy.c b/mm/mempolicy.c index 7dd9d9f80694..4545d5944243 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -1024,7 +1024,7 @@ static long do_mbind(unsigned long start, unsigned long len, err = migrate_prep(); if (err) - return err; + goto mpol_out; } { NODEMASK_SCRATCH(scratch); @@ -1039,10 +1039,9 @@ static long do_mbind(unsigned long start, unsigned long len, err = -ENOMEM; NODEMASK_SCRATCH_FREE(scratch); } - if (err) { - mpol_put(new); - return err; - } + if (err) + goto mpol_out; + vma = check_range(mm, start, end, nmask, flags | MPOL_MF_INVERT, &pagelist); @@ -1058,9 +1057,11 @@ static long do_mbind(unsigned long start, unsigned long len, if (!err && nr_failed && (flags & MPOL_MF_STRICT)) err = -EIO; - } + } else + putback_lru_pages(&pagelist); up_write(&mm->mmap_sem); + mpol_out: mpol_put(new); return err; } diff --git a/mm/page_alloc.c b/mm/page_alloc.c index bf720550b44d..cdcedf661616 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -2183,7 +2183,7 @@ void show_free_areas(void) printk("active_anon:%lu inactive_anon:%lu isolated_anon:%lu\n" " active_file:%lu inactive_file:%lu isolated_file:%lu\n" " unevictable:%lu" - " dirty:%lu writeback:%lu unstable:%lu buffer:%lu\n" + " dirty:%lu writeback:%lu unstable:%lu\n" " free:%lu slab_reclaimable:%lu slab_unreclaimable:%lu\n" " mapped:%lu shmem:%lu pagetables:%lu bounce:%lu\n", global_page_state(NR_ACTIVE_ANON), @@ -2196,7 +2196,6 @@ void show_free_areas(void) global_page_state(NR_FILE_DIRTY), global_page_state(NR_WRITEBACK), global_page_state(NR_UNSTABLE_NFS), - nr_blockdev_pages(), global_page_state(NR_FREE_PAGES), global_page_state(NR_SLAB_RECLAIMABLE), global_page_state(NR_SLAB_UNRECLAIMABLE), diff --git a/mm/vmscan.c b/mm/vmscan.c index 64e438898832..777af57fd8c8 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -544,6 +544,16 @@ redo: */ lru = LRU_UNEVICTABLE; add_page_to_unevictable_list(page); + /* + * When racing with an mlock clearing (page is + * unlocked), make sure that if the other thread does + * not observe our setting of PG_lru and fails + * isolation, we see PG_mlocked cleared below and move + * the page back to the evictable list. + * + * The other side is TestClearPageMlocked(). + */ + smp_mb(); } /* @@ -1088,7 +1098,7 @@ static unsigned long shrink_inactive_list(unsigned long max_scan, int lumpy_reclaim = 0; while (unlikely(too_many_isolated(zone, file, sc))) { - congestion_wait(WRITE, HZ/10); + congestion_wait(BLK_RW_ASYNC, HZ/10); /* We are about to die and free our memory. Return now. */ if (fatal_signal_pending(current)) @@ -1356,7 +1366,7 @@ static void shrink_active_list(unsigned long nr_pages, struct zone *zone, * IO, plus JVM can create lots of anon VM_EXEC pages, * so we ignore them here. */ - if ((vm_flags & VM_EXEC) && !PageAnon(page)) { + if ((vm_flags & VM_EXEC) && page_is_file_cache(page)) { list_add(&page->lru, &l_active); continue; } diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c index b2e07f0dd298..ea1e3daabefe 100644 --- a/net/9p/trans_virtio.c +++ b/net/9p/trans_virtio.c @@ -43,7 +43,6 @@ #include <net/9p/transport.h> #include <linux/scatterlist.h> #include <linux/virtio.h> -#include <linux/virtio_ids.h> #include <linux/virtio_9p.h> #define VIRTQUEUE_NUM 128 diff --git a/net/bluetooth/hci_sysfs.c b/net/bluetooth/hci_sysfs.c index 7f939ce29801..2bc6f6a8de68 100644 --- a/net/bluetooth/hci_sysfs.c +++ b/net/bluetooth/hci_sysfs.c @@ -92,6 +92,8 @@ static void add_conn(struct work_struct *work) dev_set_name(&conn->dev, "%s:%d", hdev->name, conn->handle); + dev_set_drvdata(&conn->dev, conn); + if (device_add(&conn->dev) < 0) { BT_ERR("Failed to register connection device"); return; @@ -144,8 +146,6 @@ void hci_conn_init_sysfs(struct hci_conn *conn) conn->dev.class = bt_class; conn->dev.parent = &hdev->dev; - dev_set_drvdata(&conn->dev, conn); - device_initialize(&conn->dev); INIT_WORK(&conn->work_add, add_conn); diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index 555d9da1869b..77e9fb130adb 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -555,12 +555,12 @@ static struct l2cap_conn *l2cap_conn_add(struct hci_conn *hcon, u8 status) conn->feat_mask = 0; - setup_timer(&conn->info_timer, l2cap_info_timeout, - (unsigned long) conn); - spin_lock_init(&conn->lock); rwlock_init(&conn->chan_list.lock); + setup_timer(&conn->info_timer, l2cap_info_timeout, + (unsigned long) conn); + conn->disc_reason = 0x13; return conn; @@ -783,6 +783,9 @@ static void l2cap_sock_init(struct sock *sk, struct sock *parent) /* Default config options */ pi->conf_len = 0; pi->flush_to = L2CAP_DEFAULT_FLUSH_TO; + skb_queue_head_init(TX_QUEUE(sk)); + skb_queue_head_init(SREJ_QUEUE(sk)); + INIT_LIST_HEAD(SREJ_LIST(sk)); } static struct proto l2cap_proto = { diff --git a/net/ipv4/inet_connection_sock.c b/net/ipv4/inet_connection_sock.c index 4351ca2cf0b8..537731b3bcb3 100644 --- a/net/ipv4/inet_connection_sock.c +++ b/net/ipv4/inet_connection_sock.c @@ -446,6 +446,28 @@ extern int sysctl_tcp_synack_retries; EXPORT_SYMBOL_GPL(inet_csk_reqsk_queue_hash_add); +/* Decide when to expire the request and when to resend SYN-ACK */ +static inline void syn_ack_recalc(struct request_sock *req, const int thresh, + const int max_retries, + const u8 rskq_defer_accept, + int *expire, int *resend) +{ + if (!rskq_defer_accept) { + *expire = req->retrans >= thresh; + *resend = 1; + return; + } + *expire = req->retrans >= thresh && + (!inet_rsk(req)->acked || req->retrans >= max_retries); + /* + * Do not resend while waiting for data after ACK, + * start to resend on end of deferring period to give + * last chance for data or ACK to create established socket. + */ + *resend = !inet_rsk(req)->acked || + req->retrans >= rskq_defer_accept - 1; +} + void inet_csk_reqsk_queue_prune(struct sock *parent, const unsigned long interval, const unsigned long timeout, @@ -501,9 +523,15 @@ void inet_csk_reqsk_queue_prune(struct sock *parent, reqp=&lopt->syn_table[i]; while ((req = *reqp) != NULL) { if (time_after_eq(now, req->expires)) { - if ((req->retrans < thresh || - (inet_rsk(req)->acked && req->retrans < max_retries)) - && !req->rsk_ops->rtx_syn_ack(parent, req)) { + int expire = 0, resend = 0; + + syn_ack_recalc(req, thresh, max_retries, + queue->rskq_defer_accept, + &expire, &resend); + if (!expire && + (!resend || + !req->rsk_ops->rtx_syn_ack(parent, req) || + inet_rsk(req)->acked)) { unsigned long timeo; if (req->retrans++ == 0) diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c index 0c0b6e363a20..e982b5c1ee17 100644 --- a/net/ipv4/ip_sockglue.c +++ b/net/ipv4/ip_sockglue.c @@ -634,17 +634,16 @@ static int do_ip_setsockopt(struct sock *sk, int level, break; } dev = ip_dev_find(sock_net(sk), mreq.imr_address.s_addr); - if (dev) { + if (dev) mreq.imr_ifindex = dev->ifindex; - dev_put(dev); - } } else - dev = __dev_get_by_index(sock_net(sk), mreq.imr_ifindex); + dev = dev_get_by_index(sock_net(sk), mreq.imr_ifindex); err = -EADDRNOTAVAIL; if (!dev) break; + dev_put(dev); err = -EINVAL; if (sk->sk_bound_dev_if && diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 64d0af675823..90b2e0649bfb 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -326,6 +326,43 @@ void tcp_enter_memory_pressure(struct sock *sk) EXPORT_SYMBOL(tcp_enter_memory_pressure); +/* Convert seconds to retransmits based on initial and max timeout */ +static u8 secs_to_retrans(int seconds, int timeout, int rto_max) +{ + u8 res = 0; + + if (seconds > 0) { + int period = timeout; + + res = 1; + while (seconds > period && res < 255) { + res++; + timeout <<= 1; + if (timeout > rto_max) + timeout = rto_max; + period += timeout; + } + } + return res; +} + +/* Convert retransmits to seconds based on initial and max timeout */ +static int retrans_to_secs(u8 retrans, int timeout, int rto_max) +{ + int period = 0; + + if (retrans > 0) { + period = timeout; + while (--retrans) { + timeout <<= 1; + if (timeout > rto_max) + timeout = rto_max; + period += timeout; + } + } + return period; +} + /* * Wait for a TCP event. * @@ -1405,7 +1442,9 @@ int tcp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, goto found_ok_skb; if (tcp_hdr(skb)->fin) goto found_fin_ok; - WARN_ON(!(flags & MSG_PEEK)); + if (WARN_ON(!(flags & MSG_PEEK))) + printk(KERN_INFO "recvmsg bug 2: copied %X " + "seq %X\n", *seq, TCP_SKB_CB(skb)->seq); } /* Well, if we have backlog, try to process it now yet. */ @@ -2163,16 +2202,10 @@ static int do_tcp_setsockopt(struct sock *sk, int level, break; case TCP_DEFER_ACCEPT: - icsk->icsk_accept_queue.rskq_defer_accept = 0; - if (val > 0) { - /* Translate value in seconds to number of - * retransmits */ - while (icsk->icsk_accept_queue.rskq_defer_accept < 32 && - val > ((TCP_TIMEOUT_INIT / HZ) << - icsk->icsk_accept_queue.rskq_defer_accept)) - icsk->icsk_accept_queue.rskq_defer_accept++; - icsk->icsk_accept_queue.rskq_defer_accept++; - } + /* Translate value in seconds to number of retransmits */ + icsk->icsk_accept_queue.rskq_defer_accept = + secs_to_retrans(val, TCP_TIMEOUT_INIT / HZ, + TCP_RTO_MAX / HZ); break; case TCP_WINDOW_CLAMP: @@ -2353,8 +2386,8 @@ static int do_tcp_getsockopt(struct sock *sk, int level, val = (val ? : sysctl_tcp_fin_timeout) / HZ; break; case TCP_DEFER_ACCEPT: - val = !icsk->icsk_accept_queue.rskq_defer_accept ? 0 : - ((TCP_TIMEOUT_INIT / HZ) << (icsk->icsk_accept_queue.rskq_defer_accept - 1)); + val = retrans_to_secs(icsk->icsk_accept_queue.rskq_defer_accept, + TCP_TIMEOUT_INIT / HZ, TCP_RTO_MAX / HZ); break; case TCP_WINDOW_CLAMP: val = tp->window_clamp; diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c index e320afea07fc..4c03598ed924 100644 --- a/net/ipv4/tcp_minisocks.c +++ b/net/ipv4/tcp_minisocks.c @@ -641,10 +641,9 @@ struct sock *tcp_check_req(struct sock *sk, struct sk_buff *skb, if (!(flg & TCP_FLAG_ACK)) return NULL; - /* If TCP_DEFER_ACCEPT is set, drop bare ACK. */ - if (inet_csk(sk)->icsk_accept_queue.rskq_defer_accept && + /* While TCP_DEFER_ACCEPT is active, drop bare ACK. */ + if (req->retrans < inet_csk(sk)->icsk_accept_queue.rskq_defer_accept && TCP_SKB_CB(skb)->end_seq == tcp_rsk(req)->rcv_isn + 1) { - inet_csk(sk)->icsk_accept_queue.rskq_defer_accept--; inet_rsk(req)->acked = 1; return NULL; } diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index 14f54eb5a7fc..4f7aaf6996a3 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -496,13 +496,17 @@ done: goto e_inval; if (val) { + struct net_device *dev; + if (sk->sk_bound_dev_if && sk->sk_bound_dev_if != val) goto e_inval; - if (__dev_get_by_index(net, val) == NULL) { + dev = dev_get_by_index(net, val); + if (!dev) { retv = -ENODEV; break; } + dev_put(dev); } np->mcast_oif = val; retv = 0; diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index 51ab497115eb..fc820cd75453 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -1074,6 +1074,8 @@ restart: err = -ECONNREFUSED; if (other->sk_state != TCP_LISTEN) goto out_unlock; + if (other->sk_shutdown & RCV_SHUTDOWN) + goto out_unlock; if (unix_recvq_full(other)) { err = -EAGAIN; diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index 87bbb8bce9bf..bc4114f1ab30 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -2,7 +2,7 @@ # (c) 2001, Dave Jones. <davej@redhat.com> (the file handling bit) # (c) 2005, Joel Schopp <jschopp@austin.ibm.com> (the ugly bit) # (c) 2007,2008, Andy Whitcroft <apw@uk.ibm.com> (new conditions, test suite) -# (c) 2008, Andy Whitcroft <apw@canonical.com> +# (c) 2008,2009, Andy Whitcroft <apw@canonical.com> # Licensed under the terms of the GNU GPL License version 2 use strict; @@ -10,7 +10,7 @@ use strict; my $P = $0; $P =~ s@.*/@@g; -my $V = '0.29'; +my $V = '0.30'; use Getopt::Long qw(:config no_auto_abbrev); @@ -130,7 +130,10 @@ if ($tree) { my $emitted_corrupt = 0; -our $Ident = qr{[A-Za-z_][A-Za-z\d_]*}; +our $Ident = qr{ + [A-Za-z_][A-Za-z\d_]* + (?:\s*\#\#\s*[A-Za-z_][A-Za-z\d_]*)* + }x; our $Storage = qr{extern|static|asmlinkage}; our $Sparse = qr{ __user| @@ -997,23 +1000,25 @@ sub annotate_values { sub possible { my ($possible, $line) = @_; - - print "CHECK<$possible> ($line)\n" if ($dbg_possible > 2); - if ($possible !~ /(?: + my $notPermitted = qr{(?: ^(?: $Modifier| $Storage| $Type| - DEFINE_\S+| + DEFINE_\S+ + )$| + ^(?: goto| return| case| else| asm|__asm__| do - )$| + )(?:\s|$)| ^(?:typedef|struct|enum)\b - )/x) { + )}x; + warn "CHECK<$possible> ($line)\n" if ($dbg_possible > 2); + if ($possible !~ $notPermitted) { # Check for modifiers. $possible =~ s/\s*$Storage\s*//g; $possible =~ s/\s*$Sparse\s*//g; @@ -1022,8 +1027,10 @@ sub possible { } elsif ($possible =~ /\s/) { $possible =~ s/\s*$Type\s*//g; for my $modifier (split(' ', $possible)) { - warn "MODIFIER: $modifier ($possible) ($line)\n" if ($dbg_possible); - push(@modifierList, $modifier); + if ($modifier !~ $notPermitted) { + warn "MODIFIER: $modifier ($possible) ($line)\n" if ($dbg_possible); + push(@modifierList, $modifier); + } } } else { @@ -1138,6 +1145,7 @@ sub process { # suppression flags my %suppress_ifbraces; my %suppress_whiletrailers; + my %suppress_export; # Pre-scan the patch sanitizing the lines. # Pre-scan the patch looking for any __setup documentation. @@ -1230,7 +1238,6 @@ sub process { $linenr++; my $rawline = $rawlines[$linenr - 1]; - my $hunk_line = ($realcnt != 0); #extract the line range in the file after the patch is applied if ($line=~/^\@\@ -\d+(?:,\d+)? \+(\d+)(,(\d+))? \@\@/) { @@ -1247,6 +1254,7 @@ sub process { %suppress_ifbraces = (); %suppress_whiletrailers = (); + %suppress_export = (); next; # track the line number as we move through the hunk, note that @@ -1270,6 +1278,8 @@ sub process { $realcnt--; } + my $hunk_line = ($realcnt != 0); + #make up the handle for any error we report on this line $prefix = "$filename:$realline: " if ($emacs && $file); $prefix = "$filename:$linenr: " if ($emacs && !$file); @@ -1420,13 +1430,22 @@ sub process { } # Check for potential 'bare' types - my ($stat, $cond, $line_nr_next, $remain_next, $off_next); + my ($stat, $cond, $line_nr_next, $remain_next, $off_next, + $realline_next); if ($realcnt && $line =~ /.\s*\S/) { ($stat, $cond, $line_nr_next, $remain_next, $off_next) = ctx_statement_block($linenr, $realcnt, 0); $stat =~ s/\n./\n /g; $cond =~ s/\n./\n /g; + # Find the real next line. + $realline_next = $line_nr_next; + if (defined $realline_next && + (!defined $lines[$realline_next - 1] || + substr($lines[$realline_next - 1], $off_next) =~ /^\s*$/)) { + $realline_next++; + } + my $s = $stat; $s =~ s/{.*$//s; @@ -1661,8 +1680,8 @@ sub process { } # check for initialisation to aggregates open brace on the next line - if ($prevline =~ /$Declare\s*$Ident\s*=\s*$/ && - $line =~ /^.\s*{/) { + if ($line =~ /^.\s*{/ && + $prevline =~ /(?:^|[^=])=\s*$/) { ERROR("that open brace { should be on the previous line\n" . $hereprev); } @@ -1687,21 +1706,40 @@ sub process { $line =~ s@//.*@@; $opline =~ s@//.*@@; -#EXPORT_SYMBOL should immediately follow its function closing }. - if (($line =~ /EXPORT_SYMBOL.*\((.*)\)/) || - ($line =~ /EXPORT_UNUSED_SYMBOL.*\((.*)\)/)) { +# EXPORT_SYMBOL should immediately follow the thing it is exporting, consider +# the whole statement. +#print "APW <$lines[$realline_next - 1]>\n"; + if (defined $realline_next && + exists $lines[$realline_next - 1] && + !defined $suppress_export{$realline_next} && + ($lines[$realline_next - 1] =~ /EXPORT_SYMBOL.*\((.*)\)/ || + $lines[$realline_next - 1] =~ /EXPORT_UNUSED_SYMBOL.*\((.*)\)/)) { my $name = $1; - if ($prevline !~ /(?: - ^.}| + if ($stat !~ /(?: + \n.}\s*$| ^.DEFINE_$Ident\(\Q$name\E\)| ^.DECLARE_$Ident\(\Q$name\E\)| ^.LIST_HEAD\(\Q$name\E\)| - ^.$Type\s*\(\s*\*\s*\Q$name\E\s*\)\s*\(| - \b\Q$name\E(?:\s+$Attribute)?\s*(?:;|=|\[) + ^.(?:$Storage\s+)?$Type\s*\(\s*\*\s*\Q$name\E\s*\)\s*\(| + \b\Q$name\E(?:\s+$Attribute)*\s*(?:;|=|\[|\() )/x) { - WARN("EXPORT_SYMBOL(foo); should immediately follow its function/variable\n" . $herecurr); +#print "FOO A<$lines[$realline_next - 1]> stat<$stat> name<$name>\n"; + $suppress_export{$realline_next} = 2; + } else { + $suppress_export{$realline_next} = 1; } } + if (!defined $suppress_export{$linenr} && + $prevline =~ /^.\s*$/ && + ($line =~ /EXPORT_SYMBOL.*\((.*)\)/ || + $line =~ /EXPORT_UNUSED_SYMBOL.*\((.*)\)/)) { +#print "FOO B <$lines[$linenr - 1]>\n"; + $suppress_export{$linenr} = 2; + } + if (defined $suppress_export{$linenr} && + $suppress_export{$linenr} == 2) { + WARN("EXPORT_SYMBOL(foo); should immediately follow its function/variable\n" . $herecurr); + } # check for external initialisers. if ($line =~ /^.$Type\s*$Ident\s*(?:\s+$Modifier)*\s*=\s*(0|NULL|false)\s*;/) { diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl index cdb44b63342e..102b76608f35 100755 --- a/scripts/get_maintainer.pl +++ b/scripts/get_maintainer.pl @@ -13,7 +13,7 @@ use strict; my $P = $0; -my $V = '0.20'; +my $V = '0.21'; use Getopt::Long qw(:config no_auto_abbrev); @@ -37,6 +37,7 @@ my $scm = 0; my $web = 0; my $subsystem = 0; my $status = 0; +my $keywords = 1; my $from_filename = 0; my $pattern_depth = 0; my $version = 0; @@ -84,6 +85,7 @@ if (!GetOptions( 'scm!' => \$scm, 'web!' => \$web, 'pattern-depth=i' => \$pattern_depth, + 'k|keywords!' => \$keywords, 'f|file' => \$from_filename, 'v|version' => \$version, 'h|help' => \$help, @@ -132,6 +134,8 @@ if (!top_of_kernel_tree($lk_path)) { ## Read MAINTAINERS for type/value pairs my @typevalue = (); +my %keyword_hash; + open(MAINT, "<${lk_path}MAINTAINERS") || die "$P: Can't open MAINTAINERS\n"; while (<MAINT>) { my $line = $_; @@ -149,6 +153,8 @@ while (<MAINT>) { if ((-d $value)) { $value =~ s@([^/])$@$1/@; } + } elsif ($type eq "K") { + $keyword_hash{@typevalue} = $value; } push(@typevalue, "$type:$value"); } elsif (!/^(\s)*$/) { @@ -188,6 +194,7 @@ if ($email_remove_duplicates) { my @files = (); my @range = (); +my @keyword_tvi = (); foreach my $file (@ARGV) { ##if $file is a directory and it lacks a trailing slash, add one @@ -198,11 +205,24 @@ foreach my $file (@ARGV) { } if ($from_filename) { push(@files, $file); + if (-f $file && $keywords) { + open(FILE, "<$file") or die "$P: Can't open ${file}\n"; + while (<FILE>) { + my $patch_line = $_; + foreach my $line (keys %keyword_hash) { + if ($patch_line =~ m/^.*$keyword_hash{$line}/x) { + push(@keyword_tvi, $line); + } + } + } + close(FILE); + } } else { my $file_cnt = @files; my $lastfile; open(PATCH, "<$file") or die "$P: Can't open ${file}\n"; while (<PATCH>) { + my $patch_line = $_; if (m/^\+\+\+\s+(\S+)/) { my $filename = $1; $filename =~ s@^[^/]*/@@; @@ -213,6 +233,12 @@ foreach my $file (@ARGV) { if ($email_git_blame) { push(@range, "$lastfile:$1:$2"); } + } elsif ($keywords) { + foreach my $line (keys %keyword_hash) { + if ($patch_line =~ m/^[+-].*$keyword_hash{$line}/x) { + push(@keyword_tvi, $line); + } + } } } close(PATCH); @@ -286,6 +312,13 @@ foreach my $file (@files) { } } +if ($keywords) { + @keyword_tvi = sort_and_uniq(@keyword_tvi); + foreach my $line (@keyword_tvi) { + add_categories($line); + } +} + if ($email) { foreach my $chief (@penguin_chief) { if ($chief =~ m/^(.*):(.*)/) { @@ -384,6 +417,7 @@ Output type options: Other options: --pattern-depth => Number of pattern directory traversals (default: 0 (all)) + --keywords => scan patch for keywords (default: 1 (on)) --version => show version --help => show this help information @@ -486,7 +520,6 @@ sub format_email { } sub find_starting_index { - my ($index) = @_; while ($index > 0) { diff --git a/sound/ppc/Kconfig b/sound/ppc/Kconfig index bd2338ab2ced..0519c60f5be1 100644 --- a/sound/ppc/Kconfig +++ b/sound/ppc/Kconfig @@ -2,7 +2,7 @@ menuconfig SND_PPC bool "PowerPC sound devices" - depends on PPC64 || PPC32 + depends on PPC default y help Support for sound devices specific to PowerPC architectures. diff --git a/tools/perf/builtin-timechart.c b/tools/perf/builtin-timechart.c index 702d8fe58fbc..e8a510d935e5 100644 --- a/tools/perf/builtin-timechart.c +++ b/tools/perf/builtin-timechart.c @@ -765,19 +765,40 @@ static void draw_wakeups(void) if (c->Y && c->start_time <= we->time && c->end_time >= we->time) { if (p->pid == we->waker) { from = c->Y; - task_from = c->comm; + task_from = strdup(c->comm); } if (p->pid == we->wakee) { to = c->Y; - task_to = c->comm; + task_to = strdup(c->comm); } } c = c->next; } + c = p->all; + while (c) { + if (p->pid == we->waker && !from) { + from = c->Y; + task_from = strdup(c->comm); + } + if (p->pid == we->wakee && !to) { + to = c->Y; + task_to = strdup(c->comm); + } + c = c->next; + } } p = p->next; } + if (!task_from) { + task_from = malloc(40); + sprintf(task_from, "[%i]", we->waker); + } + if (!task_to) { + task_to = malloc(40); + sprintf(task_to, "[%i]", we->wakee); + } + if (we->waker == -1) svg_interrupt(we->time, to); else if (from && to && abs(from - to) == 1) @@ -785,6 +806,9 @@ static void draw_wakeups(void) else svg_partial_wakeline(we->time, from, task_from, to, task_to); we = we->next; + + free(task_from); + free(task_to); } } diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c index 37512e936235..a1b1d10912dc 100644 --- a/tools/perf/builtin-top.c +++ b/tools/perf/builtin-top.c @@ -686,6 +686,8 @@ static void handle_keypress(int c) switch (c) { case 'd': prompt_integer(&delay_secs, "Enter display delay"); + if (delay_secs < 1) + delay_secs = 1; break; case 'e': prompt_integer(&print_entries, "Enter display entries (lines)"); diff --git a/tools/perf/util/PERF-VERSION-GEN b/tools/perf/util/PERF-VERSION-GEN index c561d1538c03..54552a00a117 100755 --- a/tools/perf/util/PERF-VERSION-GEN +++ b/tools/perf/util/PERF-VERSION-GEN @@ -1,7 +1,7 @@ #!/bin/sh GVF=PERF-VERSION-FILE -DEF_VER=v0.0.1.PERF +DEF_VER=v0.0.2.PERF LF=' ' diff --git a/tools/perf/util/svghelper.c b/tools/perf/util/svghelper.c index 856655d8b0b8..b3637db025a2 100644 --- a/tools/perf/util/svghelper.c +++ b/tools/perf/util/svghelper.c @@ -103,7 +103,7 @@ void open_svg(const char *filename, int cpus, int rows, u64 start, u64 end) fprintf(svgfile, " rect.process2 { fill:rgb(180,180,180); fill-opacity:0.9; stroke-width:0; stroke:rgb( 0, 0, 0); } \n"); fprintf(svgfile, " rect.sample { fill:rgb( 0, 0,255); fill-opacity:0.8; stroke-width:0; stroke:rgb( 0, 0, 0); } \n"); fprintf(svgfile, " rect.blocked { fill:rgb(255, 0, 0); fill-opacity:0.5; stroke-width:0; stroke:rgb( 0, 0, 0); } \n"); - fprintf(svgfile, " rect.waiting { fill:rgb(214,214, 0); fill-opacity:0.3; stroke-width:0; stroke:rgb( 0, 0, 0); } \n"); + fprintf(svgfile, " rect.waiting { fill:rgb(224,214, 0); fill-opacity:0.8; stroke-width:0; stroke:rgb( 0, 0, 0); } \n"); fprintf(svgfile, " rect.WAITING { fill:rgb(255,214, 48); fill-opacity:0.6; stroke-width:0; stroke:rgb( 0, 0, 0); } \n"); fprintf(svgfile, " rect.cpu { fill:rgb(192,192,192); fill-opacity:0.2; stroke-width:0.5; stroke:rgb(128,128,128); } \n"); fprintf(svgfile, " rect.pstate { fill:rgb(128,128,128); fill-opacity:0.8; stroke-width:0; } \n"); |