summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--include/linux/if_ether.h1
-rw-r--r--include/linux/netdevice.h3
-rw-r--r--include/net/dsa.h34
-rw-r--r--net/Kconfig1
-rw-r--r--net/Makefile1
-rw-r--r--net/dsa/Kconfig31
-rw-r--r--net/dsa/Makefile9
-rw-r--r--net/dsa/dsa.c369
-rw-r--r--net/dsa/dsa_priv.h110
-rw-r--r--net/dsa/mv88e6123_61_65.c417
-rw-r--r--net/dsa/mv88e6xxx.c377
-rw-r--r--net/dsa/mv88e6xxx.h77
-rw-r--r--net/dsa/slave.c288
-rw-r--r--net/dsa/tag_edsa.c213
14 files changed, 1931 insertions, 0 deletions
diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h
index 723a1c5fbc6c..2140aacb6338 100644
--- a/include/linux/if_ether.h
+++ b/include/linux/if_ether.h
@@ -77,6 +77,7 @@
#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
#define ETH_P_AOE 0x88A2 /* ATA over Ethernet */
#define ETH_P_TIPC 0x88CA /* TIPC */
+#define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
/*
* Non DIX types. Won't clash for 1500 types.
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 9cfd20be8b7f..794eeb4b3462 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -607,6 +607,9 @@ struct net_device
/* Protocol specific pointers */
+#ifdef CONFIG_NET_DSA
+ void *dsa_ptr; /* dsa specific data */
+#endif
void *atalk_ptr; /* AppleTalk link */
void *ip_ptr; /* IPv4 specific data */
void *dn_ptr; /* DECnet specific data */
diff --git a/include/net/dsa.h b/include/net/dsa.h
new file mode 100644
index 000000000000..dc4784f54520
--- /dev/null
+++ b/include/net/dsa.h
@@ -0,0 +1,34 @@
+/*
+ * include/net/dsa.h - Driver for Distributed Switch Architecture switch chips
+ * Copyright (c) 2008 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __LINUX_NET_DSA_H
+#define __LINUX_NET_DSA_H
+
+#define DSA_MAX_PORTS 12
+
+struct dsa_platform_data {
+ /*
+ * Reference to a Linux network interface that connects
+ * to the switch chip.
+ */
+ struct device *netdev;
+
+ /*
+ * How to access the switch configuration registers, and
+ * the names of the switch ports (use "cpu" to designate
+ * the switch port that the cpu is connected to).
+ */
+ struct device *mii_bus;
+ int sw_addr;
+ char *port_names[DSA_MAX_PORTS];
+};
+
+
+#endif
diff --git a/net/Kconfig b/net/Kconfig
index 9103a16a77be..d789d79551ae 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -180,6 +180,7 @@ source "net/tipc/Kconfig"
source "net/atm/Kconfig"
source "net/802/Kconfig"
source "net/bridge/Kconfig"
+source "net/dsa/Kconfig"
source "net/8021q/Kconfig"
source "net/decnet/Kconfig"
source "net/llc/Kconfig"
diff --git a/net/Makefile b/net/Makefile
index acaf819f24aa..27d1f10dc0e0 100644
--- a/net/Makefile
+++ b/net/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_PACKET) += packet/
obj-$(CONFIG_NET_KEY) += key/
obj-$(CONFIG_NET_SCHED) += sched/
obj-$(CONFIG_BRIDGE) += bridge/
+obj-$(CONFIG_NET_DSA) += dsa/
obj-$(CONFIG_IPX) += ipx/
obj-$(CONFIG_ATALK) += appletalk/
obj-$(CONFIG_WAN_ROUTER) += wanrouter/
diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
new file mode 100644
index 000000000000..7cf55e5eb39f
--- /dev/null
+++ b/net/dsa/Kconfig
@@ -0,0 +1,31 @@
+menuconfig NET_DSA
+ bool "Distributed Switch Architecture support"
+ default n
+ depends on EXPERIMENTAL
+ ---help---
+ This allows you to use hardware switch chips that use
+ the Distributed Switch Architecture.
+
+
+if NET_DSA
+
+# tagging formats
+config NET_DSA_TAG_EDSA
+ bool
+ default n
+
+
+# switch drivers
+config NET_DSA_MV88E6XXX
+ bool
+ default n
+
+config NET_DSA_MV88E6123_61_65
+ bool "Marvell 88E6123/6161/6165 ethernet switch chip support"
+ select NET_DSA_MV88E6XXX
+ select NET_DSA_TAG_EDSA
+ ---help---
+ This enables support for the Marvell 88E6123/6161/6165
+ ethernet switch chips.
+
+endif
diff --git a/net/dsa/Makefile b/net/dsa/Makefile
new file mode 100644
index 000000000000..b59a6f6bcf56
--- /dev/null
+++ b/net/dsa/Makefile
@@ -0,0 +1,9 @@
+# tagging formats
+obj-$(CONFIG_NET_DSA_TAG_EDSA) += tag_edsa.o
+
+# switch drivers
+obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o
+obj-$(CONFIG_NET_DSA_MV88E6123_61_65) += mv88e6123_61_65.o
+
+# the core
+obj-$(CONFIG_NET_DSA) += dsa.o slave.o
diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
new file mode 100644
index 000000000000..6cc5be2ec7f1
--- /dev/null
+++ b/net/dsa/dsa.c
@@ -0,0 +1,369 @@
+/*
+ * net/dsa/dsa.c - Hardware switch handling
+ * Copyright (c) 2008 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/list.h>
+#include <linux/netdevice.h>
+#include <linux/platform_device.h>
+#include <net/dsa.h>
+#include "dsa_priv.h"
+
+char dsa_driver_version[] = "0.1";
+
+
+/* switch driver registration ***********************************************/
+static DEFINE_MUTEX(dsa_switch_drivers_mutex);
+static LIST_HEAD(dsa_switch_drivers);
+
+void register_switch_driver(struct dsa_switch_driver *drv)
+{
+ mutex_lock(&dsa_switch_drivers_mutex);
+ list_add_tail(&drv->list, &dsa_switch_drivers);
+ mutex_unlock(&dsa_switch_drivers_mutex);
+}
+
+void unregister_switch_driver(struct dsa_switch_driver *drv)
+{
+ mutex_lock(&dsa_switch_drivers_mutex);
+ list_del_init(&drv->list);
+ mutex_unlock(&dsa_switch_drivers_mutex);
+}
+
+static struct dsa_switch_driver *
+dsa_switch_probe(struct mii_bus *bus, int sw_addr, char **_name)
+{
+ struct dsa_switch_driver *ret;
+ struct list_head *list;
+ char *name;
+
+ ret = NULL;
+ name = NULL;
+
+ mutex_lock(&dsa_switch_drivers_mutex);
+ list_for_each(list, &dsa_switch_drivers) {
+ struct dsa_switch_driver *drv;
+
+ drv = list_entry(list, struct dsa_switch_driver, list);
+
+ name = drv->probe(bus, sw_addr);
+ if (name != NULL) {
+ ret = drv;
+ break;
+ }
+ }
+ mutex_unlock(&dsa_switch_drivers_mutex);
+
+ *_name = name;
+
+ return ret;
+}
+
+
+/* basic switch operations **************************************************/
+static struct dsa_switch *
+dsa_switch_setup(struct device *parent, struct dsa_platform_data *pd,
+ struct mii_bus *bus, struct net_device *dev)
+{
+ struct dsa_switch *ds;
+ int ret;
+ struct dsa_switch_driver *drv;
+ char *name;
+ int i;
+
+ /*
+ * Probe for switch model.
+ */
+ drv = dsa_switch_probe(bus, pd->sw_addr, &name);
+ if (drv == NULL) {
+ printk(KERN_ERR "%s: could not detect attached switch\n",
+ dev->name);
+ return ERR_PTR(-EINVAL);
+ }
+ printk(KERN_INFO "%s: detected a %s switch\n", dev->name, name);
+
+
+ /*
+ * Allocate and initialise switch state.
+ */
+ ds = kzalloc(sizeof(*ds) + drv->priv_size, GFP_KERNEL);
+ if (ds == NULL)
+ return ERR_PTR(-ENOMEM);
+
+ ds->pd = pd;
+ ds->master_netdev = dev;
+ ds->master_mii_bus = bus;
+
+ ds->drv = drv;
+ ds->tag_protocol = drv->tag_protocol;
+
+
+ /*
+ * Validate supplied switch configuration.
+ */
+ ds->cpu_port = -1;
+ for (i = 0; i < DSA_MAX_PORTS; i++) {
+ char *name;
+
+ name = pd->port_names[i];
+ if (name == NULL)
+ continue;
+
+ if (!strcmp(name, "cpu")) {
+ if (ds->cpu_port != -1) {
+ printk(KERN_ERR "multiple cpu ports?!\n");
+ ret = -EINVAL;
+ goto out;
+ }
+ ds->cpu_port = i;
+ } else {
+ ds->valid_port_mask |= 1 << i;
+ }
+ }
+
+ if (ds->cpu_port == -1) {
+ printk(KERN_ERR "no cpu port?!\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+
+ /*
+ * If we use a tagging format that doesn't have an ethertype
+ * field, make sure that all packets from this point on get
+ * sent to the tag format's receive function. (Which will
+ * discard received packets until we set ds->ports[] below.)
+ */
+ wmb();
+ dev->dsa_ptr = (void *)ds;
+
+
+ /*
+ * Do basic register setup.
+ */
+ ret = drv->setup(ds);
+ if (ret < 0)
+ goto out;
+
+ ret = drv->set_addr(ds, dev->dev_addr);
+ if (ret < 0)
+ goto out;
+
+ ds->slave_mii_bus = mdiobus_alloc();
+ if (ds->slave_mii_bus == NULL) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ dsa_slave_mii_bus_init(ds);
+
+ ret = mdiobus_register(ds->slave_mii_bus);
+ if (ret < 0)
+ goto out_free;
+
+
+ /*
+ * Create network devices for physical switch ports.
+ */
+ wmb();
+ for (i = 0; i < DSA_MAX_PORTS; i++) {
+ struct net_device *slave_dev;
+
+ if (!(ds->valid_port_mask & (1 << i)))
+ continue;
+
+ slave_dev = dsa_slave_create(ds, parent, i, pd->port_names[i]);
+ if (slave_dev == NULL) {
+ printk(KERN_ERR "%s: can't create dsa slave "
+ "device for port %d(%s)\n",
+ dev->name, i, pd->port_names[i]);
+ continue;
+ }
+
+ ds->ports[i] = slave_dev;
+ }
+
+ return ds;
+
+out_free:
+ mdiobus_free(ds->slave_mii_bus);
+out:
+ dev->dsa_ptr = NULL;
+ kfree(ds);
+ return ERR_PTR(ret);
+}
+
+static void dsa_switch_destroy(struct dsa_switch *ds)
+{
+}
+
+
+/* link polling *************************************************************/
+static void dsa_link_poll_work(struct work_struct *ugly)
+{
+ struct dsa_switch *ds;
+
+ ds = container_of(ugly, struct dsa_switch, link_poll_work);
+
+ ds->drv->poll_link(ds);
+ mod_timer(&ds->link_poll_timer, round_jiffies(jiffies + HZ));
+}
+
+static void dsa_link_poll_timer(unsigned long _ds)
+{
+ struct dsa_switch *ds = (void *)_ds;
+
+ schedule_work(&ds->link_poll_work);
+}
+
+
+/* platform driver init and cleanup *****************************************/
+static int dev_is_class(struct device *dev, void *class)
+{
+ if (dev->class != NULL && !strcmp(dev->class->name, class))
+ return 1;
+
+ return 0;
+}
+
+static struct device *dev_find_class(struct device *parent, char *class)
+{
+ if (dev_is_class(parent, class)) {
+ get_device(parent);
+ return parent;
+ }
+
+ return device_find_child(parent, class, dev_is_class);
+}
+
+static struct mii_bus *dev_to_mii_bus(struct device *dev)
+{
+ struct device *d;
+
+ d = dev_find_class(dev, "mdio_bus");
+ if (d != NULL) {
+ struct mii_bus *bus;
+
+ bus = to_mii_bus(d);
+ put_device(d);
+
+ return bus;
+ }
+
+ return NULL;
+}
+
+static struct net_device *dev_to_net_device(struct device *dev)
+{
+ struct device *d;
+
+ d = dev_find_class(dev, "net");
+ if (d != NULL) {
+ struct net_device *nd;
+
+ nd = to_net_dev(d);
+ dev_hold(nd);
+ put_device(d);
+
+ return nd;
+ }
+
+ return NULL;
+}
+
+static int dsa_probe(struct platform_device *pdev)
+{
+ static int dsa_version_printed;
+ struct dsa_platform_data *pd = pdev->dev.platform_data;
+ struct net_device *dev;
+ struct mii_bus *bus;
+ struct dsa_switch *ds;
+
+ if (!dsa_version_printed++)
+ printk(KERN_NOTICE "Distributed Switch Architecture "
+ "driver version %s\n", dsa_driver_version);
+
+ if (pd == NULL || pd->mii_bus == NULL || pd->netdev == NULL)
+ return -EINVAL;
+
+ bus = dev_to_mii_bus(pd->mii_bus);
+ if (bus == NULL)
+ return -EINVAL;
+
+ dev = dev_to_net_device(pd->netdev);
+ if (dev == NULL)
+ return -EINVAL;
+
+ if (dev->dsa_ptr != NULL) {
+ dev_put(dev);
+ return -EEXIST;
+ }
+
+ ds = dsa_switch_setup(&pdev->dev, pd, bus, dev);
+ if (IS_ERR(ds)) {
+ dev_put(dev);
+ return PTR_ERR(ds);
+ }
+
+ if (ds->drv->poll_link != NULL) {
+ INIT_WORK(&ds->link_poll_work, dsa_link_poll_work);
+ init_timer(&ds->link_poll_timer);
+ ds->link_poll_timer.data = (unsigned long)ds;
+ ds->link_poll_timer.function = dsa_link_poll_timer;
+ ds->link_poll_timer.expires = round_jiffies(jiffies + HZ);
+ add_timer(&ds->link_poll_timer);
+ }
+
+ platform_set_drvdata(pdev, ds);
+
+ return 0;
+}
+
+static int dsa_remove(struct platform_device *pdev)
+{
+ struct dsa_switch *ds = platform_get_drvdata(pdev);
+
+ if (ds->drv->poll_link != NULL)
+ del_timer_sync(&ds->link_poll_timer);
+
+ flush_scheduled_work();
+
+ dsa_switch_destroy(ds);
+
+ return 0;
+}
+
+static void dsa_shutdown(struct platform_device *pdev)
+{
+}
+
+static struct platform_driver dsa_driver = {
+ .probe = dsa_probe,
+ .remove = dsa_remove,
+ .shutdown = dsa_shutdown,
+ .driver = {
+ .name = "dsa",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init dsa_init_module(void)
+{
+ return platform_driver_register(&dsa_driver);
+}
+module_init(dsa_init_module);
+
+static void __exit dsa_cleanup_module(void)
+{
+ platform_driver_unregister(&dsa_driver);
+}
+module_exit(dsa_cleanup_module);
+
+MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>")
+MODULE_DESCRIPTION("Driver for Distributed Switch Architecture switch chips");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:dsa");
diff --git a/net/dsa/dsa_priv.h b/net/dsa/dsa_priv.h
new file mode 100644
index 000000000000..21ee9052079a
--- /dev/null
+++ b/net/dsa/dsa_priv.h
@@ -0,0 +1,110 @@
+/*
+ * net/dsa/dsa_priv.h - Hardware switch handling
+ * Copyright (c) 2008 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DSA_PRIV_H
+#define __DSA_PRIV_H
+
+#include <linux/list.h>
+#include <linux/phy.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+#include <net/dsa.h>
+
+struct dsa_switch {
+ /*
+ * Configuration data for the platform device that owns
+ * this dsa switch instance.
+ */
+ struct dsa_platform_data *pd;
+
+ /*
+ * References to network device and mii bus to use.
+ */
+ struct net_device *master_netdev;
+ struct mii_bus *master_mii_bus;
+
+ /*
+ * The used switch driver and frame tagging type.
+ */
+ struct dsa_switch_driver *drv;
+ __be16 tag_protocol;
+
+ /*
+ * Slave mii_bus and devices for the individual ports.
+ */
+ int cpu_port;
+ u32 valid_port_mask;
+ struct mii_bus *slave_mii_bus;
+ struct net_device *ports[DSA_MAX_PORTS];
+
+ /*
+ * Link state polling.
+ */
+ struct work_struct link_poll_work;
+ struct timer_list link_poll_timer;
+};
+
+struct dsa_slave_priv {
+ struct net_device *dev;
+ struct dsa_switch *parent;
+ int port;
+ struct phy_device *phy;
+};
+
+struct dsa_switch_driver {
+ struct list_head list;
+
+ __be16 tag_protocol;
+ int priv_size;
+
+ /*
+ * Probing and setup.
+ */
+ char *(*probe)(struct mii_bus *bus, int sw_addr);
+ int (*setup)(struct dsa_switch *ds);
+ int (*set_addr)(struct dsa_switch *ds, u8 *addr);
+
+ /*
+ * Access to the switch's PHY registers.
+ */
+ int (*phy_read)(struct dsa_switch *ds, int port, int regnum);
+ int (*phy_write)(struct dsa_switch *ds, int port,
+ int regnum, u16 val);
+
+ /*
+ * Link state polling and IRQ handling.
+ */
+ void (*poll_link)(struct dsa_switch *ds);
+
+ /*
+ * ethtool hardware statistics.
+ */
+ void (*get_strings)(struct dsa_switch *ds, int port, uint8_t *data);
+ void (*get_ethtool_stats)(struct dsa_switch *ds,
+ int port, uint64_t *data);
+ int (*get_sset_count)(struct dsa_switch *ds);
+};
+
+/* dsa.c */
+extern char dsa_driver_version[];
+void register_switch_driver(struct dsa_switch_driver *type);
+void unregister_switch_driver(struct dsa_switch_driver *type);
+
+/* slave.c */
+void dsa_slave_mii_bus_init(struct dsa_switch *ds);
+struct net_device *dsa_slave_create(struct dsa_switch *ds,
+ struct device *parent,
+ int port, char *name);
+
+/* tag_edsa.c */
+int edsa_xmit(struct sk_buff *skb, struct net_device *dev);
+
+
+#endif
diff --git a/net/dsa/mv88e6123_61_65.c b/net/dsa/mv88e6123_61_65.c
new file mode 100644
index 000000000000..147818cc706e
--- /dev/null
+++ b/net/dsa/mv88e6123_61_65.c
@@ -0,0 +1,417 @@
+/*
+ * net/dsa/mv88e6123_61_65.c - Marvell 88e6123/6161/6165 switch chip support
+ * Copyright (c) 2008 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/list.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include "dsa_priv.h"
+#include "mv88e6xxx.h"
+
+static char *mv88e6123_61_65_probe(struct mii_bus *bus, int sw_addr)
+{
+ int ret;
+
+ ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), 0x03);
+ if (ret >= 0) {
+ ret &= 0xfff0;
+ if (ret == 0x1210)
+ return "Marvell 88E6123";
+ if (ret == 0x1610)
+ return "Marvell 88E6161";
+ if (ret == 0x1650)
+ return "Marvell 88E6165";
+ }
+
+ return NULL;
+}
+
+static int mv88e6123_61_65_switch_reset(struct dsa_switch *ds)
+{
+ int i;
+ int ret;
+
+ /*
+ * Set all ports to the disabled state.
+ */
+ for (i = 0; i < 8; i++) {
+ ret = REG_READ(REG_PORT(i), 0x04);
+ REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
+ }
+
+ /*
+ * Wait for transmit queues to drain.
+ */
+ msleep(2);
+
+ /*
+ * Reset the switch.
+ */
+ REG_WRITE(REG_GLOBAL, 0x04, 0xc400);
+
+ /*
+ * Wait up to one second for reset to complete.
+ */
+ for (i = 0; i < 1000; i++) {
+ ret = REG_READ(REG_GLOBAL, 0x00);
+ if ((ret & 0xc800) == 0xc800)
+ break;
+
+ msleep(1);
+ }
+ if (i == 1000)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int mv88e6123_61_65_setup_global(struct dsa_switch *ds)
+{
+ int ret;
+ int i;
+
+ /*
+ * Disable the PHY polling unit (since there won't be any
+ * external PHYs to poll), don't discard packets with
+ * excessive collisions, and mask all interrupt sources.
+ */
+ REG_WRITE(REG_GLOBAL, 0x04, 0x0000);
+
+ /*
+ * Set the default address aging time to 5 minutes, and
+ * enable address learn messages to be sent to all message
+ * ports.
+ */
+ REG_WRITE(REG_GLOBAL, 0x0a, 0x0148);
+
+ /*
+ * Configure the priority mapping registers.
+ */
+ ret = mv88e6xxx_config_prio(ds);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Configure the cpu port, and configure the cpu port as the
+ * port to which ingress and egress monitor frames are to be
+ * sent.
+ */
+ REG_WRITE(REG_GLOBAL, 0x1a, (ds->cpu_port * 0x1110));
+
+ /*
+ * Disable remote management for now, and set the switch's
+ * DSA device number to zero.
+ */
+ REG_WRITE(REG_GLOBAL, 0x1c, 0x0000);
+
+ /*
+ * Send all frames with destination addresses matching
+ * 01:80:c2:00:00:2x to the CPU port.
+ */
+ REG_WRITE(REG_GLOBAL2, 0x02, 0xffff);
+
+ /*
+ * Send all frames with destination addresses matching
+ * 01:80:c2:00:00:0x to the CPU port.
+ */
+ REG_WRITE(REG_GLOBAL2, 0x03, 0xffff);
+
+ /*
+ * Disable the loopback filter, disable flow control
+ * messages, disable flood broadcast override, disable
+ * removing of provider tags, disable ATU age violation
+ * interrupts, disable tag flow control, force flow
+ * control priority to the highest, and send all special
+ * multicast frames to the CPU at the highest priority.
+ */
+ REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff);
+
+ /*
+ * Map all DSA device IDs to the CPU port.
+ */
+ for (i = 0; i < 32; i++)
+ REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | ds->cpu_port);
+
+ /*
+ * Clear all trunk masks.
+ */
+ for (i = 0; i < 8; i++)
+ REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0xff);
+
+ /*
+ * Clear all trunk mappings.
+ */
+ for (i = 0; i < 16; i++)
+ REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11));
+
+ /*
+ * Disable ingress rate limiting by resetting all ingress
+ * rate limit registers to their initial state.
+ */
+ for (i = 0; i < 6; i++)
+ REG_WRITE(REG_GLOBAL2, 0x09, 0x9000 | (i << 8));
+
+ /*
+ * Initialise cross-chip port VLAN table to reset defaults.
+ */
+ REG_WRITE(REG_GLOBAL2, 0x0b, 0x9000);
+
+ /*
+ * Clear the priority override table.
+ */
+ for (i = 0; i < 16; i++)
+ REG_WRITE(REG_GLOBAL2, 0x0f, 0x8000 | (i << 8));
+
+ /* @@@ initialise AVB (22/23) watchdog (27) sdet (29) registers */
+
+ return 0;
+}
+
+static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p)
+{
+ int addr = REG_PORT(p);
+
+ /*
+ * MAC Forcing register: don't force link, speed, duplex
+ * or flow control state to any particular values.
+ */
+ REG_WRITE(addr, 0x01, 0x0003);
+
+ /*
+ * Do not limit the period of time that this port can be
+ * paused for by the remote end or the period of time that
+ * this port can pause the remote end.
+ */
+ REG_WRITE(addr, 0x02, 0x0000);
+
+ /*
+ * Port Control: disable Drop-on-Unlock, disable Drop-on-Lock,
+ * configure the EDSA tagging mode if this is the CPU port,
+ * disable Header mode, enable IGMP/MLD snooping, disable VLAN
+ * tunneling, determine priority by looking at 802.1p and IP
+ * priority fields (IP prio has precedence), and set STP state
+ * to Forwarding. Finally, if this is the CPU port, additionally
+ * enable forwarding of unknown unicast and multicast addresses.
+ */
+ REG_WRITE(addr, 0x04,
+ (p == ds->cpu_port) ? 0x373f : 0x0433);
+
+ /*
+ * Port Control 1: disable trunking. Also, if this is the
+ * CPU port, enable learn messages to be sent to this port.
+ */
+ REG_WRITE(addr, 0x05, (p == ds->cpu_port) ? 0x8000 : 0x0000);
+
+ /*
+ * Port based VLAN map: give each port its own address
+ * database, allow the CPU port to talk to each of the 'real'
+ * ports, and allow each of the 'real' ports to only talk to
+ * the CPU port.
+ */
+ REG_WRITE(addr, 0x06,
+ ((p & 0xf) << 12) |
+ ((p == ds->cpu_port) ?
+ ds->valid_port_mask :
+ (1 << ds->cpu_port)));
+
+ /*
+ * Default VLAN ID and priority: don't set a default VLAN
+ * ID, and set the default packet priority to zero.
+ */
+ REG_WRITE(addr, 0x07, 0x0000);
+
+ /*
+ * Port Control 2: don't force a good FCS, set the maximum
+ * frame size to 10240 bytes, don't let the switch add or
+ * strip 802.1q tags, don't discard tagged or untagged frames
+ * on this port, do a destination address lookup on all
+ * received packets as usual, disable ARP mirroring and don't
+ * send a copy of all transmitted/received frames on this port
+ * to the CPU.
+ */
+ REG_WRITE(addr, 0x08, 0x2080);
+
+ /*
+ * Egress rate control: disable egress rate control.
+ */
+ REG_WRITE(addr, 0x09, 0x0001);
+
+ /*
+ * Egress rate control 2: disable egress rate control.
+ */
+ REG_WRITE(addr, 0x0a, 0x0000);
+
+ /*
+ * Port Association Vector: when learning source addresses
+ * of packets, add the address to the address database using
+ * a port bitmap that has only the bit for this port set and
+ * the other bits clear.
+ */
+ REG_WRITE(addr, 0x0b, 1 << p);
+
+ /*
+ * Port ATU control: disable limiting the number of address
+ * database entries that this port is allowed to use.
+ */
+ REG_WRITE(addr, 0x0c, 0x0000);
+
+ /*
+ * Priorit Override: disable DA, SA and VTU priority override.
+ */
+ REG_WRITE(addr, 0x0d, 0x0000);
+
+ /*
+ * Port Ethertype: use the Ethertype DSA Ethertype value.
+ */
+ REG_WRITE(addr, 0x0f, ETH_P_EDSA);
+
+ /*
+ * Tag Remap: use an identity 802.1p prio -> switch prio
+ * mapping.
+ */
+ REG_WRITE(addr, 0x18, 0x3210);
+
+ /*
+ * Tag Remap 2: use an identity 802.1p prio -> switch prio
+ * mapping.
+ */
+ REG_WRITE(addr, 0x19, 0x7654);
+
+ return 0;
+}
+
+static int mv88e6123_61_65_setup(struct dsa_switch *ds)
+{
+ struct mv88e6xxx_priv_state *ps = (void *)(ds + 1);
+ int i;
+ int ret;
+
+ mutex_init(&ps->smi_mutex);
+ mutex_init(&ps->stats_mutex);
+
+ ret = mv88e6123_61_65_switch_reset(ds);
+ if (ret < 0)
+ return ret;
+
+ /* @@@ initialise vtu and atu */
+
+ ret = mv88e6123_61_65_setup_global(ds);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < 6; i++) {
+ ret = mv88e6123_61_65_setup_port(ds, i);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mv88e6123_61_65_port_to_phy_addr(int port)
+{
+ if (port >= 0 && port <= 4)
+ return port;
+ return -1;
+}
+
+static int
+mv88e6123_61_65_phy_read(struct dsa_switch *ds, int port, int regnum)
+{
+ int addr = mv88e6123_61_65_port_to_phy_addr(port);
+ return mv88e6xxx_phy_read(ds, addr, regnum);
+}
+
+static int
+mv88e6123_61_65_phy_write(struct dsa_switch *ds,
+ int port, int regnum, u16 val)
+{
+ int addr = mv88e6123_61_65_port_to_phy_addr(port);
+ return mv88e6xxx_phy_write(ds, addr, regnum, val);
+}
+
+static struct mv88e6xxx_hw_stat mv88e6123_61_65_hw_stats[] = {
+ { "in_good_octets", 8, 0x00, },
+ { "in_bad_octets", 4, 0x02, },
+ { "in_unicast", 4, 0x04, },
+ { "in_broadcasts", 4, 0x06, },
+ { "in_multicasts", 4, 0x07, },
+ { "in_pause", 4, 0x16, },
+ { "in_undersize", 4, 0x18, },
+ { "in_fragments", 4, 0x19, },
+ { "in_oversize", 4, 0x1a, },
+ { "in_jabber", 4, 0x1b, },
+ { "in_rx_error", 4, 0x1c, },
+ { "in_fcs_error", 4, 0x1d, },
+ { "out_octets", 8, 0x0e, },
+ { "out_unicast", 4, 0x10, },
+ { "out_broadcasts", 4, 0x13, },
+ { "out_multicasts", 4, 0x12, },
+ { "out_pause", 4, 0x15, },
+ { "excessive", 4, 0x11, },
+ { "collisions", 4, 0x1e, },
+ { "deferred", 4, 0x05, },
+ { "single", 4, 0x14, },
+ { "multiple", 4, 0x17, },
+ { "out_fcs_error", 4, 0x03, },
+ { "late", 4, 0x1f, },
+ { "hist_64bytes", 4, 0x08, },
+ { "hist_65_127bytes", 4, 0x09, },
+ { "hist_128_255bytes", 4, 0x0a, },
+ { "hist_256_511bytes", 4, 0x0b, },
+ { "hist_512_1023bytes", 4, 0x0c, },
+ { "hist_1024_max_bytes", 4, 0x0d, },
+};
+
+static void
+mv88e6123_61_65_get_strings(struct dsa_switch *ds, int port, uint8_t *data)
+{
+ mv88e6xxx_get_strings(ds, ARRAY_SIZE(mv88e6123_61_65_hw_stats),
+ mv88e6123_61_65_hw_stats, port, data);
+}
+
+static void
+mv88e6123_61_65_get_ethtool_stats(struct dsa_switch *ds,
+ int port, uint64_t *data)
+{
+ mv88e6xxx_get_ethtool_stats(ds, ARRAY_SIZE(mv88e6123_61_65_hw_stats),
+ mv88e6123_61_65_hw_stats, port, data);
+}
+
+static int mv88e6123_61_65_get_sset_count(struct dsa_switch *ds)
+{
+ return ARRAY_SIZE(mv88e6123_61_65_hw_stats);
+}
+
+static struct dsa_switch_driver mv88e6123_61_65_switch_driver = {
+ .tag_protocol = __constant_htons(ETH_P_EDSA),
+ .priv_size = sizeof(struct mv88e6xxx_priv_state),
+ .probe = mv88e6123_61_65_probe,
+ .setup = mv88e6123_61_65_setup,
+ .set_addr = mv88e6xxx_set_addr_indirect,
+ .phy_read = mv88e6123_61_65_phy_read,
+ .phy_write = mv88e6123_61_65_phy_write,
+ .poll_link = mv88e6xxx_poll_link,
+ .get_strings = mv88e6123_61_65_get_strings,
+ .get_ethtool_stats = mv88e6123_61_65_get_ethtool_stats,
+ .get_sset_count = mv88e6123_61_65_get_sset_count,
+};
+
+int __init mv88e6123_61_65_init(void)
+{
+ register_switch_driver(&mv88e6123_61_65_switch_driver);
+ return 0;
+}
+module_init(mv88e6123_61_65_init);
+
+void __exit mv88e6123_61_65_cleanup(void)
+{
+ unregister_switch_driver(&mv88e6123_61_65_switch_driver);
+}
+module_exit(mv88e6123_61_65_cleanup);
diff --git a/net/dsa/mv88e6xxx.c b/net/dsa/mv88e6xxx.c
new file mode 100644
index 000000000000..13d2328a2406
--- /dev/null
+++ b/net/dsa/mv88e6xxx.c
@@ -0,0 +1,377 @@
+/*
+ * net/dsa/mv88e6xxx.c - Marvell 88e6xxx switch chip support
+ * Copyright (c) 2008 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/list.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include "dsa_priv.h"
+#include "mv88e6xxx.h"
+
+/*
+ * If the switch's ADDR[4:0] strap pins are strapped to zero, it will
+ * use all 32 SMI bus addresses on its SMI bus, and all switch registers
+ * will be directly accessible on some {device address,register address}
+ * pair. If the ADDR[4:0] pins are not strapped to zero, the switch
+ * will only respond to SMI transactions to that specific address, and
+ * an indirect addressing mechanism needs to be used to access its
+ * registers.
+ */
+static int mv88e6xxx_reg_wait_ready(struct mii_bus *bus, int sw_addr)
+{
+ int ret;
+ int i;
+
+ for (i = 0; i < 16; i++) {
+ ret = mdiobus_read(bus, sw_addr, 0);
+ if (ret < 0)
+ return ret;
+
+ if ((ret & 0x8000) == 0)
+ return 0;
+ }
+
+ return -ETIMEDOUT;
+}
+
+int __mv88e6xxx_reg_read(struct mii_bus *bus, int sw_addr, int addr, int reg)
+{
+ int ret;
+
+ if (sw_addr == 0)
+ return mdiobus_read(bus, addr, reg);
+
+ /*
+ * Wait for the bus to become free.
+ */
+ ret = mv88e6xxx_reg_wait_ready(bus, sw_addr);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Transmit the read command.
+ */
+ ret = mdiobus_write(bus, sw_addr, 0, 0x9800 | (addr << 5) | reg);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Wait for the read command to complete.
+ */
+ ret = mv88e6xxx_reg_wait_ready(bus, sw_addr);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Read the data.
+ */
+ ret = mdiobus_read(bus, sw_addr, 1);
+ if (ret < 0)
+ return ret;
+
+ return ret & 0xffff;
+}
+
+int mv88e6xxx_reg_read(struct dsa_switch *ds, int addr, int reg)
+{
+ struct mv88e6xxx_priv_state *ps = (void *)(ds + 1);
+ int ret;
+
+ mutex_lock(&ps->smi_mutex);
+ ret = __mv88e6xxx_reg_read(ds->master_mii_bus,
+ ds->pd->sw_addr, addr, reg);
+ mutex_unlock(&ps->smi_mutex);
+
+ return ret;
+}
+
+int __mv88e6xxx_reg_write(struct mii_bus *bus, int sw_addr, int addr,
+ int reg, u16 val)
+{
+ int ret;
+
+ if (sw_addr == 0)
+ return mdiobus_write(bus, addr, reg, val);
+
+ /*
+ * Wait for the bus to become free.
+ */
+ ret = mv88e6xxx_reg_wait_ready(bus, sw_addr);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Transmit the data to write.
+ */
+ ret = mdiobus_write(bus, sw_addr, 1, val);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Transmit the write command.
+ */
+ ret = mdiobus_write(bus, sw_addr, 0, 0x9400 | (addr << 5) | reg);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Wait for the write command to complete.
+ */
+ ret = mv88e6xxx_reg_wait_ready(bus, sw_addr);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int mv88e6xxx_reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
+{
+ struct mv88e6xxx_priv_state *ps = (void *)(ds + 1);
+ int ret;
+
+ mutex_lock(&ps->smi_mutex);
+ ret = __mv88e6xxx_reg_write(ds->master_mii_bus,
+ ds->pd->sw_addr, addr, reg, val);
+ mutex_unlock(&ps->smi_mutex);
+
+ return ret;
+}
+
+int mv88e6xxx_config_prio(struct dsa_switch *ds)
+{
+ /*
+ * Configure the IP ToS mapping registers.
+ */
+ REG_WRITE(REG_GLOBAL, 0x10, 0x0000);
+ REG_WRITE(REG_GLOBAL, 0x11, 0x0000);
+ REG_WRITE(REG_GLOBAL, 0x12, 0x5555);
+ REG_WRITE(REG_GLOBAL, 0x13, 0x5555);
+ REG_WRITE(REG_GLOBAL, 0x14, 0xaaaa);
+ REG_WRITE(REG_GLOBAL, 0x15, 0xaaaa);
+ REG_WRITE(REG_GLOBAL, 0x16, 0xffff);
+ REG_WRITE(REG_GLOBAL, 0x17, 0xffff);
+
+ /*
+ * Configure the IEEE 802.1p priority mapping register.
+ */
+ REG_WRITE(REG_GLOBAL, 0x18, 0xfa41);
+
+ return 0;
+}
+
+int mv88e6xxx_set_addr_indirect(struct dsa_switch *ds, u8 *addr)
+{
+ int i;
+ int ret;
+
+ for (i = 0; i < 6; i++) {
+ int j;
+
+ /*
+ * Write the MAC address byte.
+ */
+ REG_WRITE(REG_GLOBAL2, 0x0d, 0x8000 | (i << 8) | addr[i]);
+
+ /*
+ * Wait for the write to complete.
+ */
+ for (j = 0; j < 16; j++) {
+ ret = REG_READ(REG_GLOBAL2, 0x0d);
+ if ((ret & 0x8000) == 0)
+ break;
+ }
+ if (j == 16)
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+int mv88e6xxx_phy_read(struct dsa_switch *ds, int addr, int regnum)
+{
+ if (addr >= 0)
+ return mv88e6xxx_reg_read(ds, addr, regnum);
+ return 0xffff;
+}
+
+int mv88e6xxx_phy_write(struct dsa_switch *ds, int addr, int regnum, u16 val)
+{
+ if (addr >= 0)
+ return mv88e6xxx_reg_write(ds, addr, regnum, val);
+ return 0;
+}
+
+void mv88e6xxx_poll_link(struct dsa_switch *ds)
+{
+ int i;
+
+ for (i = 0; i < DSA_MAX_PORTS; i++) {
+ struct net_device *dev;
+ int port_status;
+ int link;
+ int speed;
+ int duplex;
+ int fc;
+
+ dev = ds->ports[i];
+ if (dev == NULL)
+ continue;
+
+ link = 0;
+ if (dev->flags & IFF_UP) {
+ port_status = mv88e6xxx_reg_read(ds, REG_PORT(i), 0x00);
+ if (port_status < 0)
+ continue;
+
+ link = !!(port_status & 0x0800);
+ }
+
+ if (!link) {
+ if (netif_carrier_ok(dev)) {
+ printk(KERN_INFO "%s: link down\n", dev->name);
+ netif_carrier_off(dev);
+ }
+ continue;
+ }
+
+ switch (port_status & 0x0300) {
+ case 0x0000:
+ speed = 10;
+ break;
+ case 0x0100:
+ speed = 100;
+ break;
+ case 0x0200:
+ speed = 1000;
+ break;
+ default:
+ speed = -1;
+ break;
+ }
+ duplex = (port_status & 0x0400) ? 1 : 0;
+ fc = (port_status & 0x8000) ? 1 : 0;
+
+ if (!netif_carrier_ok(dev)) {
+ printk(KERN_INFO "%s: link up, %d Mb/s, %s duplex, "
+ "flow control %sabled\n", dev->name,
+ speed, duplex ? "full" : "half",
+ fc ? "en" : "dis");
+ netif_carrier_on(dev);
+ }
+ }
+}
+
+static int mv88e6xxx_stats_wait(struct dsa_switch *ds)
+{
+ int ret;
+ int i;
+
+ for (i = 0; i < 10; i++) {
+ ret = REG_READ(REG_GLOBAL2, 0x1d);
+ if ((ret & 0x8000) == 0)
+ return 0;
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int mv88e6xxx_stats_snapshot(struct dsa_switch *ds, int port)
+{
+ int ret;
+
+ /*
+ * Snapshot the hardware statistics counters for this port.
+ */
+ REG_WRITE(REG_GLOBAL, 0x1d, 0xdc00 | port);
+
+ /*
+ * Wait for the snapshotting to complete.
+ */
+ ret = mv88e6xxx_stats_wait(ds);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static void mv88e6xxx_stats_read(struct dsa_switch *ds, int stat, u32 *val)
+{
+ u32 _val;
+ int ret;
+
+ *val = 0;
+
+ ret = mv88e6xxx_reg_write(ds, REG_GLOBAL, 0x1d, 0xcc00 | stat);
+ if (ret < 0)
+ return;
+
+ ret = mv88e6xxx_stats_wait(ds);
+ if (ret < 0)
+ return;
+
+ ret = mv88e6xxx_reg_read(ds, REG_GLOBAL, 0x1e);
+ if (ret < 0)
+ return;
+
+ _val = ret << 16;
+
+ ret = mv88e6xxx_reg_read(ds, REG_GLOBAL, 0x1f);
+ if (ret < 0)
+ return;
+
+ *val = _val | ret;
+}
+
+void mv88e6xxx_get_strings(struct dsa_switch *ds,
+ int nr_stats, struct mv88e6xxx_hw_stat *stats,
+ int port, uint8_t *data)
+{
+ int i;
+
+ for (i = 0; i < nr_stats; i++) {
+ memcpy(data + i * ETH_GSTRING_LEN,
+ stats[i].string, ETH_GSTRING_LEN);
+ }
+}
+
+void mv88e6xxx_get_ethtool_stats(struct dsa_switch *ds,
+ int nr_stats, struct mv88e6xxx_hw_stat *stats,
+ int port, uint64_t *data)
+{
+ struct mv88e6xxx_priv_state *ps = (void *)(ds + 1);
+ int ret;
+ int i;
+
+ mutex_lock(&ps->stats_mutex);
+
+ ret = mv88e6xxx_stats_snapshot(ds, port);
+ if (ret < 0) {
+ mutex_unlock(&ps->stats_mutex);
+ return;
+ }
+
+ /*
+ * Read each of the counters.
+ */
+ for (i = 0; i < nr_stats; i++) {
+ struct mv88e6xxx_hw_stat *s = stats + i;
+ u32 low;
+ u32 high;
+
+ mv88e6xxx_stats_read(ds, s->reg, &low);
+ if (s->sizeof_stat == 8)
+ mv88e6xxx_stats_read(ds, s->reg + 1, &high);
+ else
+ high = 0;
+
+ data[i] = (((u64)high) << 32) | low;
+ }
+
+ mutex_unlock(&ps->stats_mutex);
+}
diff --git a/net/dsa/mv88e6xxx.h b/net/dsa/mv88e6xxx.h
new file mode 100644
index 000000000000..a004d4d02081
--- /dev/null
+++ b/net/dsa/mv88e6xxx.h
@@ -0,0 +1,77 @@
+/*
+ * net/dsa/mv88e6xxx.h - Marvell 88e6xxx switch chip support
+ * Copyright (c) 2008 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __MV88E6XXX_H
+#define __MV88E6XXX_H
+
+#define REG_PORT(p) (0x10 + (p))
+#define REG_GLOBAL 0x1b
+#define REG_GLOBAL2 0x1c
+
+struct mv88e6xxx_priv_state {
+ /*
+ * When using multi-chip addressing, this mutex protects
+ * access to the indirect access registers. (In single-chip
+ * mode, this mutex is effectively useless.)
+ */
+ struct mutex smi_mutex;
+
+ /*
+ * This mutex serialises access to the statistics unit.
+ * Hold this mutex over snapshot + dump sequences.
+ */
+ struct mutex stats_mutex;
+};
+
+struct mv88e6xxx_hw_stat {
+ char string[ETH_GSTRING_LEN];
+ int sizeof_stat;
+ int reg;
+};
+
+int __mv88e6xxx_reg_read(struct mii_bus *bus, int sw_addr, int addr, int reg);
+int mv88e6xxx_reg_read(struct dsa_switch *ds, int addr, int reg);
+int __mv88e6xxx_reg_write(struct mii_bus *bus, int sw_addr, int addr,
+ int reg, u16 val);
+int mv88e6xxx_reg_write(struct dsa_switch *ds, int addr, int reg, u16 val);
+int mv88e6xxx_config_prio(struct dsa_switch *ds);
+int mv88e6xxx_set_addr_indirect(struct dsa_switch *ds, u8 *addr);
+int mv88e6xxx_phy_read(struct dsa_switch *ds, int addr, int regnum);
+int mv88e6xxx_phy_write(struct dsa_switch *ds, int addr, int regnum, u16 val);
+void mv88e6xxx_poll_link(struct dsa_switch *ds);
+void mv88e6xxx_get_strings(struct dsa_switch *ds,
+ int nr_stats, struct mv88e6xxx_hw_stat *stats,
+ int port, uint8_t *data);
+void mv88e6xxx_get_ethtool_stats(struct dsa_switch *ds,
+ int nr_stats, struct mv88e6xxx_hw_stat *stats,
+ int port, uint64_t *data);
+
+#define REG_READ(addr, reg) \
+ ({ \
+ int __ret; \
+ \
+ __ret = mv88e6xxx_reg_read(ds, addr, reg); \
+ if (__ret < 0) \
+ return __ret; \
+ __ret; \
+ })
+
+#define REG_WRITE(addr, reg, val) \
+ ({ \
+ int __ret; \
+ \
+ __ret = mv88e6xxx_reg_write(ds, addr, reg, val); \
+ if (__ret < 0) \
+ return __ret; \
+ })
+
+
+
+#endif
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
new file mode 100644
index 000000000000..3cb331e98b89
--- /dev/null
+++ b/net/dsa/slave.c
@@ -0,0 +1,288 @@
+/*
+ * net/dsa/slave.c - Slave device handling
+ * Copyright (c) 2008 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/list.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include "dsa_priv.h"
+
+/* slave mii_bus handling ***************************************************/
+static int dsa_slave_phy_read(struct mii_bus *bus, int addr, int reg)
+{
+ struct dsa_switch *ds = bus->priv;
+
+ if (ds->valid_port_mask & (1 << addr))
+ return ds->drv->phy_read(ds, addr, reg);
+
+ return 0xffff;
+}
+
+static int dsa_slave_phy_write(struct mii_bus *bus, int addr, int reg, u16 val)
+{
+ struct dsa_switch *ds = bus->priv;
+
+ if (ds->valid_port_mask & (1 << addr))
+ return ds->drv->phy_write(ds, addr, reg, val);
+
+ return 0;
+}
+
+void dsa_slave_mii_bus_init(struct dsa_switch *ds)
+{
+ ds->slave_mii_bus->priv = (void *)ds;
+ ds->slave_mii_bus->name = "dsa slave smi";
+ ds->slave_mii_bus->read = dsa_slave_phy_read;
+ ds->slave_mii_bus->write = dsa_slave_phy_write;
+ snprintf(ds->slave_mii_bus->id, MII_BUS_ID_SIZE, "%s:%.2x",
+ ds->master_mii_bus->id, ds->pd->sw_addr);
+ ds->slave_mii_bus->parent = &(ds->master_mii_bus->dev);
+}
+
+
+/* slave device handling ****************************************************/
+static int dsa_slave_open(struct net_device *dev)
+{
+ return 0;
+}
+
+static int dsa_slave_close(struct net_device *dev)
+{
+ return 0;
+}
+
+static void dsa_slave_change_rx_flags(struct net_device *dev, int change)
+{
+ struct dsa_slave_priv *p = netdev_priv(dev);
+ struct net_device *master = p->parent->master_netdev;
+
+ if (change & IFF_ALLMULTI)
+ dev_set_allmulti(master, dev->flags & IFF_ALLMULTI ? 1 : -1);
+ if (change & IFF_PROMISC)
+ dev_set_promiscuity(master, dev->flags & IFF_PROMISC ? 1 : -1);
+}
+
+static void dsa_slave_set_rx_mode(struct net_device *dev)
+{
+ struct dsa_slave_priv *p = netdev_priv(dev);
+ struct net_device *master = p->parent->master_netdev;
+
+ dev_mc_sync(master, dev);
+ dev_unicast_sync(master, dev);
+}
+
+static int dsa_slave_set_mac_address(struct net_device *dev, void *addr)
+{
+ memcpy(dev->dev_addr, addr + 2, 6);
+
+ return 0;
+}
+
+static int dsa_slave_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ struct dsa_slave_priv *p = netdev_priv(dev);
+ struct mii_ioctl_data *mii_data = if_mii(ifr);
+
+ if (p->phy != NULL)
+ return phy_mii_ioctl(p->phy, mii_data, cmd);
+
+ return -EOPNOTSUPP;
+}
+
+
+/* ethtool operations *******************************************************/
+static int
+dsa_slave_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct dsa_slave_priv *p = netdev_priv(dev);
+ int err;
+
+ err = -EOPNOTSUPP;
+ if (p->phy != NULL) {
+ err = phy_read_status(p->phy);
+ if (err == 0)
+ err = phy_ethtool_gset(p->phy, cmd);
+ }
+
+ return err;
+}
+
+static int
+dsa_slave_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct dsa_slave_priv *p = netdev_priv(dev);
+
+ if (p->phy != NULL)
+ return phy_ethtool_sset(p->phy, cmd);
+
+ return -EOPNOTSUPP;
+}
+
+static void dsa_slave_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ strncpy(drvinfo->driver, "dsa", 32);
+ strncpy(drvinfo->version, dsa_driver_version, 32);
+ strncpy(drvinfo->fw_version, "N/A", 32);
+ strncpy(drvinfo->bus_info, "platform", 32);
+}
+
+static int dsa_slave_nway_reset(struct net_device *dev)
+{
+ struct dsa_slave_priv *p = netdev_priv(dev);
+
+ if (p->phy != NULL)
+ return genphy_restart_aneg(p->phy);
+
+ return -EOPNOTSUPP;
+}
+
+static u32 dsa_slave_get_link(struct net_device *dev)
+{
+ struct dsa_slave_priv *p = netdev_priv(dev);
+
+ if (p->phy != NULL) {
+ genphy_update_link(p->phy);
+ return p->phy->link;
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static void dsa_slave_get_strings(struct net_device *dev,
+ uint32_t stringset, uint8_t *data)
+{
+ struct dsa_slave_priv *p = netdev_priv(dev);
+ struct dsa_switch *ds = p->parent;
+
+ if (stringset == ETH_SS_STATS) {
+ int len = ETH_GSTRING_LEN;
+
+ strncpy(data, "tx_packets", len);
+ strncpy(data + len, "tx_bytes", len);
+ strncpy(data + 2 * len, "rx_packets", len);
+ strncpy(data + 3 * len, "rx_bytes", len);
+ if (ds->drv->get_strings != NULL)
+ ds->drv->get_strings(ds, p->port, data + 4 * len);
+ }
+}
+
+static void dsa_slave_get_ethtool_stats(struct net_device *dev,
+ struct ethtool_stats *stats,
+ uint64_t *data)
+{
+ struct dsa_slave_priv *p = netdev_priv(dev);
+ struct dsa_switch *ds = p->parent;
+
+ data[0] = p->dev->stats.tx_packets;
+ data[1] = p->dev->stats.tx_bytes;
+ data[2] = p->dev->stats.rx_packets;
+ data[3] = p->dev->stats.rx_bytes;
+ if (ds->drv->get_ethtool_stats != NULL)
+ ds->drv->get_ethtool_stats(ds, p->port, data + 4);
+}
+
+static int dsa_slave_get_sset_count(struct net_device *dev, int sset)
+{
+ struct dsa_slave_priv *p = netdev_priv(dev);
+ struct dsa_switch *ds = p->parent;
+
+ if (sset == ETH_SS_STATS) {
+ int count;
+
+ count = 4;
+ if (ds->drv->get_sset_count != NULL)
+ count += ds->drv->get_sset_count(ds);
+
+ return count;
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static const struct ethtool_ops dsa_slave_ethtool_ops = {
+ .get_settings = dsa_slave_get_settings,
+ .set_settings = dsa_slave_set_settings,
+ .get_drvinfo = dsa_slave_get_drvinfo,
+ .nway_reset = dsa_slave_nway_reset,
+ .get_link = dsa_slave_get_link,
+ .set_sg = ethtool_op_set_sg,
+ .get_strings = dsa_slave_get_strings,
+ .get_ethtool_stats = dsa_slave_get_ethtool_stats,
+ .get_sset_count = dsa_slave_get_sset_count,
+};
+
+
+/* slave device setup *******************************************************/
+struct net_device *
+dsa_slave_create(struct dsa_switch *ds, struct device *parent,
+ int port, char *name)
+{
+ struct net_device *master = ds->master_netdev;
+ struct net_device *slave_dev;
+ struct dsa_slave_priv *p;
+ int ret;
+
+ slave_dev = alloc_netdev(sizeof(struct dsa_slave_priv),
+ name, ether_setup);
+ if (slave_dev == NULL)
+ return slave_dev;
+
+ slave_dev->features = master->vlan_features;
+ SET_ETHTOOL_OPS(slave_dev, &dsa_slave_ethtool_ops);
+ memcpy(slave_dev->dev_addr, master->dev_addr, ETH_ALEN);
+ slave_dev->tx_queue_len = 0;
+ switch (ds->tag_protocol) {
+#ifdef CONFIG_NET_DSA_TAG_EDSA
+ case htons(ETH_P_EDSA):
+ slave_dev->hard_start_xmit = edsa_xmit;
+ break;
+#endif
+ default:
+ BUG();
+ }
+ slave_dev->open = dsa_slave_open;
+ slave_dev->stop = dsa_slave_close;
+ slave_dev->change_rx_flags = dsa_slave_change_rx_flags;
+ slave_dev->set_rx_mode = dsa_slave_set_rx_mode;
+ slave_dev->set_multicast_list = dsa_slave_set_rx_mode;
+ slave_dev->set_mac_address = dsa_slave_set_mac_address;
+ slave_dev->do_ioctl = dsa_slave_ioctl;
+ SET_NETDEV_DEV(slave_dev, parent);
+ slave_dev->vlan_features = master->vlan_features;
+
+ p = netdev_priv(slave_dev);
+ p->dev = slave_dev;
+ p->parent = ds;
+ p->port = port;
+ p->phy = ds->slave_mii_bus->phy_map[port];
+
+ ret = register_netdev(slave_dev);
+ if (ret) {
+ printk(KERN_ERR "%s: error %d registering interface %s\n",
+ master->name, ret, slave_dev->name);
+ free_netdev(slave_dev);
+ return NULL;
+ }
+
+ netif_carrier_off(slave_dev);
+
+ if (p->phy != NULL) {
+ phy_attach(slave_dev, p->phy->dev.bus_id,
+ 0, PHY_INTERFACE_MODE_GMII);
+
+ p->phy->autoneg = AUTONEG_ENABLE;
+ p->phy->speed = 0;
+ p->phy->duplex = 0;
+ p->phy->advertising = p->phy->supported | ADVERTISED_Autoneg;
+ phy_start_aneg(p->phy);
+ }
+
+ return slave_dev;
+}
diff --git a/net/dsa/tag_edsa.c b/net/dsa/tag_edsa.c
new file mode 100644
index 000000000000..f985ea993843
--- /dev/null
+++ b/net/dsa/tag_edsa.c
@@ -0,0 +1,213 @@
+/*
+ * net/dsa/tag_edsa.c - Ethertype DSA tagging
+ * Copyright (c) 2008 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/etherdevice.h>
+#include <linux/list.h>
+#include <linux/netdevice.h>
+#include "dsa_priv.h"
+
+#define DSA_HLEN 4
+#define EDSA_HLEN 8
+
+int edsa_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct dsa_slave_priv *p = netdev_priv(dev);
+ u8 *edsa_header;
+
+ dev->stats.tx_packets++;
+ dev->stats.tx_bytes += skb->len;
+
+ /*
+ * Convert the outermost 802.1q tag to a DSA tag and prepend
+ * a DSA ethertype field is the packet is tagged, or insert
+ * a DSA ethertype plus DSA tag between the addresses and the
+ * current ethertype field if the packet is untagged.
+ */
+ if (skb->protocol == htons(ETH_P_8021Q)) {
+ if (skb_cow_head(skb, DSA_HLEN) < 0)
+ goto out_free;
+ skb_push(skb, DSA_HLEN);
+
+ memmove(skb->data, skb->data + DSA_HLEN, 2 * ETH_ALEN);
+
+ /*
+ * Construct tagged FROM_CPU DSA tag from 802.1q tag.
+ */
+ edsa_header = skb->data + 2 * ETH_ALEN;
+ edsa_header[0] = (ETH_P_EDSA >> 8) & 0xff;
+ edsa_header[1] = ETH_P_EDSA & 0xff;
+ edsa_header[2] = 0x00;
+ edsa_header[3] = 0x00;
+ edsa_header[4] = 0x60;
+ edsa_header[5] = p->port << 3;
+
+ /*
+ * Move CFI field from byte 6 to byte 5.
+ */
+ if (edsa_header[6] & 0x10) {
+ edsa_header[5] |= 0x01;
+ edsa_header[6] &= ~0x10;
+ }
+ } else {
+ if (skb_cow_head(skb, EDSA_HLEN) < 0)
+ goto out_free;
+ skb_push(skb, EDSA_HLEN);
+
+ memmove(skb->data, skb->data + EDSA_HLEN, 2 * ETH_ALEN);
+
+ /*
+ * Construct untagged FROM_CPU DSA tag.
+ */
+ edsa_header = skb->data + 2 * ETH_ALEN;
+ edsa_header[0] = (ETH_P_EDSA >> 8) & 0xff;
+ edsa_header[1] = ETH_P_EDSA & 0xff;
+ edsa_header[2] = 0x00;
+ edsa_header[3] = 0x00;
+ edsa_header[4] = 0x40;
+ edsa_header[5] = p->port << 3;
+ edsa_header[6] = 0x00;
+ edsa_header[7] = 0x00;
+ }
+
+ skb->protocol = htons(ETH_P_EDSA);
+
+ skb->dev = p->parent->master_netdev;
+ dev_queue_xmit(skb);
+
+ return NETDEV_TX_OK;
+
+out_free:
+ kfree_skb(skb);
+ return NETDEV_TX_OK;
+}
+
+static int edsa_rcv(struct sk_buff *skb, struct net_device *dev,
+ struct packet_type *pt, struct net_device *orig_dev)
+{
+ struct dsa_switch *ds = dev->dsa_ptr;
+ u8 *edsa_header;
+ int source_port;
+
+ if (unlikely(ds == NULL))
+ goto out_drop;
+
+ skb = skb_unshare(skb, GFP_ATOMIC);
+ if (skb == NULL)
+ goto out;
+
+ if (unlikely(!pskb_may_pull(skb, EDSA_HLEN)))
+ goto out_drop;
+
+ /*
+ * Skip the two null bytes after the ethertype.
+ */
+ edsa_header = skb->data + 2;
+
+ /*
+ * Check that frame type is either TO_CPU or FORWARD, and
+ * that the source device is zero.
+ */
+ if ((edsa_header[0] & 0xdf) != 0x00 && (edsa_header[0] & 0xdf) != 0xc0)
+ goto out_drop;
+
+ /*
+ * Check that the source port is a registered DSA port.
+ */
+ source_port = (edsa_header[1] >> 3) & 0x1f;
+ if (source_port >= DSA_MAX_PORTS || ds->ports[source_port] == NULL)
+ goto out_drop;
+
+ /*
+ * If the 'tagged' bit is set, convert the DSA tag to a 802.1q
+ * tag and delete the ethertype part. If the 'tagged' bit is
+ * clear, delete the ethertype and the DSA tag parts.
+ */
+ if (edsa_header[0] & 0x20) {
+ u8 new_header[4];
+
+ /*
+ * Insert 802.1q ethertype and copy the VLAN-related
+ * fields, but clear the bit that will hold CFI (since
+ * DSA uses that bit location for another purpose).
+ */
+ new_header[0] = (ETH_P_8021Q >> 8) & 0xff;
+ new_header[1] = ETH_P_8021Q & 0xff;
+ new_header[2] = edsa_header[2] & ~0x10;
+ new_header[3] = edsa_header[3];
+
+ /*
+ * Move CFI bit from its place in the DSA header to
+ * its 802.1q-designated place.
+ */
+ if (edsa_header[1] & 0x01)
+ new_header[2] |= 0x10;
+
+ skb_pull_rcsum(skb, DSA_HLEN);
+
+ /*
+ * Update packet checksum if skb is CHECKSUM_COMPLETE.
+ */
+ if (skb->ip_summed == CHECKSUM_COMPLETE) {
+ __wsum c = skb->csum;
+ c = csum_add(c, csum_partial(new_header + 2, 2, 0));
+ c = csum_sub(c, csum_partial(edsa_header + 2, 2, 0));
+ skb->csum = c;
+ }
+
+ memcpy(edsa_header, new_header, DSA_HLEN);
+
+ memmove(skb->data - ETH_HLEN,
+ skb->data - ETH_HLEN - DSA_HLEN,
+ 2 * ETH_ALEN);
+ } else {
+ /*
+ * Remove DSA tag and update checksum.
+ */
+ skb_pull_rcsum(skb, EDSA_HLEN);
+ memmove(skb->data - ETH_HLEN,
+ skb->data - ETH_HLEN - EDSA_HLEN,
+ 2 * ETH_ALEN);
+ }
+
+ skb->dev = ds->ports[source_port];
+ skb_push(skb, ETH_HLEN);
+ skb->protocol = eth_type_trans(skb, skb->dev);
+
+ skb->dev->last_rx = jiffies;
+ skb->dev->stats.rx_packets++;
+ skb->dev->stats.rx_bytes += skb->len;
+
+ netif_receive_skb(skb);
+
+ return 0;
+
+out_drop:
+ kfree_skb(skb);
+out:
+ return 0;
+}
+
+static struct packet_type edsa_packet_type = {
+ .type = __constant_htons(ETH_P_EDSA),
+ .func = edsa_rcv,
+};
+
+static int __init edsa_init_module(void)
+{
+ dev_add_pack(&edsa_packet_type);
+ return 0;
+}
+module_init(edsa_init_module);
+
+static void __exit edsa_cleanup_module(void)
+{
+ dev_remove_pack(&edsa_packet_type);
+}
+module_exit(edsa_cleanup_module);
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-04 02:48:45 +0000