diff options
| -rw-r--r-- | drivers/usb/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/usb/host/ohci-at91.c | 88 | ||||
| -rw-r--r-- | drivers/usb/host/ohci-hcd.c | 3 |
3 files changed, 62 insertions, 31 deletions
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 2ee742d40c43..005043197527 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -24,7 +24,7 @@ config USB_ARCH_HAS_OHCI default y if ARCH_S3C2410 default y if PXA27x default y if ARCH_EP93XX - default y if ARCH_AT91RM9200 + default y if (ARCH_AT91RM9200 || ARCH_AT91SAM9261) # PPC: default y if STB03xxx default y if PPC_MPC52xx diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index cdbafb710000..85cc059705a6 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -4,7 +4,7 @@ * Copyright (C) 2004 SAN People (Pty) Ltd. * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org> * - * AT91RM9200 Bus Glue + * AT91 Bus Glue * * Based on fragments of 2.4 driver by Rick Bronson. * Based on ohci-omap.c @@ -19,12 +19,13 @@ #include <asm/hardware.h> #include <asm/arch/board.h> -#ifndef CONFIG_ARCH_AT91RM9200 -#error "CONFIG_ARCH_AT91RM9200 must be defined." +#ifndef CONFIG_ARCH_AT91 +#error "CONFIG_ARCH_AT91 must be defined." #endif /* interface and function clocks */ static struct clk *iclk, *fclk; +static int clocked; extern int usb_disabled(void); @@ -35,13 +36,14 @@ static void at91_start_hc(struct platform_device *pdev) struct usb_hcd *hcd = platform_get_drvdata(pdev); struct ohci_regs __iomem *regs = hcd->regs; - dev_dbg(&pdev->dev, "starting AT91RM9200 OHCI USB Controller\n"); + dev_dbg(&pdev->dev, "start\n"); /* * Start the USB clocks. */ clk_enable(iclk); clk_enable(fclk); + clocked = 1; /* * The USB host controller must remain in reset. @@ -54,7 +56,7 @@ static void at91_stop_hc(struct platform_device *pdev) struct usb_hcd *hcd = platform_get_drvdata(pdev); struct ohci_regs __iomem *regs = hcd->regs; - dev_dbg(&pdev->dev, "stopping AT91RM9200 OHCI USB Controller\n"); + dev_dbg(&pdev->dev, "stop\n"); /* * Put the USB host controller into reset. @@ -66,6 +68,7 @@ static void at91_stop_hc(struct platform_device *pdev) */ clk_disable(fclk); clk_disable(iclk); + clocked = 0; } @@ -78,14 +81,15 @@ static int usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *); /** - * usb_hcd_at91_probe - initialize AT91RM9200-based HCDs + * usb_hcd_at91_probe - initialize AT91-based HCDs * Context: !in_interrupt() * * Allocates basic resources for this USB host controller, and * then invokes the start() method for the HCD associated with it * through the hotplug entry's driver_data. */ -int usb_hcd_at91_probe (const struct hc_driver *driver, struct platform_device *pdev) +static int usb_hcd_at91_probe(const struct hc_driver *driver, + struct platform_device *pdev) { int retval; struct usb_hcd *hcd = NULL; @@ -95,12 +99,13 @@ int usb_hcd_at91_probe (const struct hc_driver *driver, struct platform_device * return -ENODEV; } - if ((pdev->resource[0].flags != IORESOURCE_MEM) || (pdev->resource[1].flags != IORESOURCE_IRQ)) { + if ((pdev->resource[0].flags != IORESOURCE_MEM) + || (pdev->resource[1].flags != IORESOURCE_IRQ)) { pr_debug("hcd probe: invalid resource type\n"); return -ENODEV; } - hcd = usb_create_hcd(driver, &pdev->dev, "at91rm9200"); + hcd = usb_create_hcd(driver, &pdev->dev, "at91"); if (!hcd) return -ENOMEM; hcd->rsrc_start = pdev->resource[0].start; @@ -149,21 +154,23 @@ int usb_hcd_at91_probe (const struct hc_driver *driver, struct platform_device * /* may be called with controller, bus, and devices active */ /** - * usb_hcd_at91_remove - shutdown processing for AT91RM9200-based HCDs + * usb_hcd_at91_remove - shutdown processing for AT91-based HCDs * @dev: USB Host Controller being removed * Context: !in_interrupt() * * Reverses the effect of usb_hcd_at91_probe(), first invoking * the HCD's stop() method. It is always called from a thread - * context, normally "rmmod", "apmd", or something similar. + * context, "rmmod" or something similar. * */ -static int usb_hcd_at91_remove (struct usb_hcd *hcd, struct platform_device *pdev) +static int usb_hcd_at91_remove(struct usb_hcd *hcd, + struct platform_device *pdev) { usb_remove_hcd(hcd); at91_stop_hc(pdev); iounmap(hcd->regs); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + disable_irq_wake(hcd->irq); clk_put(fclk); clk_put(iclk); @@ -178,19 +185,21 @@ static int usb_hcd_at91_remove (struct usb_hcd *hcd, struct platform_device *pde static int __devinit ohci_at91_start (struct usb_hcd *hcd) { -// struct at91_ohci_data *board = hcd->self.controller->platform_data; + struct at91_usbh_data *board = hcd->self.controller->platform_data; struct ohci_hcd *ohci = hcd_to_ohci (hcd); + struct usb_device *root = hcd->self.root_hub; int ret; if ((ret = ohci_init(ohci)) < 0) return ret; + root->maxchild = board->ports; + if ((ret = ohci_run(ohci)) < 0) { err("can't start %s", hcd->self.bus_name); ohci_stop(hcd); return ret; } -// hcd->self.root_hub->maxchild = board->ports; return 0; } @@ -198,7 +207,7 @@ ohci_at91_start (struct usb_hcd *hcd) static const struct hc_driver ohci_at91_hc_driver = { .description = hcd_name, - .product_desc = "AT91RM9200 OHCI", + .product_desc = "AT91 OHCI", .hcd_priv_size = sizeof(struct ohci_hcd), /* @@ -240,33 +249,54 @@ static const struct hc_driver ohci_at91_hc_driver = { /*-------------------------------------------------------------------------*/ -static int ohci_hcd_at91_drv_probe(struct platform_device *dev) +static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) { - return usb_hcd_at91_probe(&ohci_at91_hc_driver, dev); + device_init_wakeup(&pdev->dev, 1); + return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev); } -static int ohci_hcd_at91_drv_remove(struct platform_device *dev) +static int ohci_hcd_at91_drv_remove(struct platform_device *pdev) { - return usb_hcd_at91_remove(platform_get_drvdata(dev), dev); + device_init_wakeup(&pdev->dev, 0); + return usb_hcd_at91_remove(platform_get_drvdata(pdev), pdev); } #ifdef CONFIG_PM -/* REVISIT suspend/resume look "too" simple here */ - static int -ohci_hcd_at91_drv_suspend(struct platform_device *dev, pm_message_t mesg) +ohci_hcd_at91_drv_suspend(struct platform_device *pdev, pm_message_t mesg) { - clk_disable(fclk); - clk_disable(iclk); + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + + if (device_may_wakeup(&pdev->dev)) + enable_irq_wake(hcd->irq); + else + disable_irq_wake(hcd->irq); + + /* + * The integrated transceivers seem unable to notice disconnect, + * reconnect, or wakeup without the 48 MHz clock active. so for + * correctness, always discard connection state (using reset). + * + * REVISIT: some boards will be able to turn VBUS off... + */ + if (at91_suspend_entering_slow_clock()) { + ohci_usb_reset (ohci); + clk_disable(fclk); + clk_disable(iclk); + clocked = 0; + } return 0; } -static int ohci_hcd_at91_drv_resume(struct platform_device *dev) +static int ohci_hcd_at91_drv_resume(struct platform_device *pdev) { - clk_enable(iclk); - clk_enable(fclk); + if (!clocked) { + clk_enable(iclk); + clk_enable(fclk); + } return 0; } @@ -275,7 +305,7 @@ static int ohci_hcd_at91_drv_resume(struct platform_device *dev) #define ohci_hcd_at91_drv_resume NULL #endif -MODULE_ALIAS("at91rm9200-ohci"); +MODULE_ALIAS("at91_ohci"); static struct platform_driver ohci_hcd_at91_driver = { .probe = ohci_hcd_at91_drv_probe, @@ -283,7 +313,7 @@ static struct platform_driver ohci_hcd_at91_driver = { .suspend = ohci_hcd_at91_drv_suspend, .resume = ohci_hcd_at91_drv_resume, .driver = { - .name = "at91rm9200-ohci", + .name = "at91_ohci", .owner = THIS_MODULE, }, }; diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index afef5ac35b4a..94d8cf4b36c1 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -913,7 +913,7 @@ MODULE_LICENSE ("GPL"); #include "ohci-ppc-soc.c" #endif -#ifdef CONFIG_ARCH_AT91RM9200 +#if defined(CONFIG_ARCH_AT91RM9200) || defined(CONFIG_ARCH_AT91SAM9261) #include "ohci-at91.c" #endif @@ -927,6 +927,7 @@ MODULE_LICENSE ("GPL"); || defined (CONFIG_SOC_AU1X00) \ || defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \ || defined (CONFIG_ARCH_AT91RM9200) \ + || defined (CONFIG_ARCH_AT91SAM9261) \ ) #error "missing bus glue for ohci-hcd" #endif |