diff options
188 files changed, 20718 insertions, 4171 deletions
diff --git a/Documentation/networking/cxgb.txt b/Documentation/networking/cxgb.txt new file mode 100644 index 000000000000..76324638626b --- /dev/null +++ b/Documentation/networking/cxgb.txt @@ -0,0 +1,352 @@ + Chelsio N210 10Gb Ethernet Network Controller + + Driver Release Notes for Linux + + Version 2.1.1 + + June 20, 2005 + +CONTENTS +======== + INTRODUCTION + FEATURES + PERFORMANCE + DRIVER MESSAGES + KNOWN ISSUES + SUPPORT + + +INTRODUCTION +============ + + This document describes the Linux driver for Chelsio 10Gb Ethernet Network + Controller. This driver supports the Chelsio N210 NIC and is backward + compatible with the Chelsio N110 model 10Gb NICs. + + +FEATURES +======== + + Adaptive Interrupts (adaptive-rx) + --------------------------------- + + This feature provides an adaptive algorithm that adjusts the interrupt + coalescing parameters, allowing the driver to dynamically adapt the latency + settings to achieve the highest performance during various types of network + load. + + The interface used to control this feature is ethtool. Please see the + ethtool manpage for additional usage information. + + By default, adaptive-rx is disabled. + To enable adaptive-rx: + + ethtool -C <interface> adaptive-rx on + + To disable adaptive-rx, use ethtool: + + ethtool -C <interface> adaptive-rx off + + After disabling adaptive-rx, the timer latency value will be set to 50us. + You may set the timer latency after disabling adaptive-rx: + + ethtool -C <interface> rx-usecs <microseconds> + + An example to set the timer latency value to 100us on eth0: + + ethtool -C eth0 rx-usecs 100 + + You may also provide a timer latency value while disabling adpative-rx: + + ethtool -C <interface> adaptive-rx off rx-usecs <microseconds> + + If adaptive-rx is disabled and a timer latency value is specified, the timer + will be set to the specified value until changed by the user or until + adaptive-rx is enabled. + + To view the status of the adaptive-rx and timer latency values: + + ethtool -c <interface> + + + TCP Segmentation Offloading (TSO) Support + ----------------------------------------- + + This feature, also known as "large send", enables a system's protocol stack + to offload portions of outbound TCP processing to a network interface card + thereby reducing system CPU utilization and enhancing performance. + + The interface used to control this feature is ethtool version 1.8 or higher. + Please see the ethtool manpage for additional usage information. + + By default, TSO is enabled. + To disable TSO: + + ethtool -K <interface> tso off + + To enable TSO: + + ethtool -K <interface> tso on + + To view the status of TSO: + + ethtool -k <interface> + + +PERFORMANCE +=========== + + The following information is provided as an example of how to change system + parameters for "performance tuning" an what value to use. You may or may not + want to change these system parameters, depending on your server/workstation + application. Doing so is not warranted in any way by Chelsio Communications, + and is done at "YOUR OWN RISK". Chelsio will not be held responsible for loss + of data or damage to equipment. + + Your distribution may have a different way of doing things, or you may prefer + a different method. These commands are shown only to provide an example of + what to do and are by no means definitive. + + Making any of the following system changes will only last until you reboot + your system. You may want to write a script that runs at boot-up which + includes the optimal settings for your system. + + Setting PCI Latency Timer: + setpci -d 1425:* 0x0c.l=0x0000F800 + + Disabling TCP timestamp: + sysctl -w net.ipv4.tcp_timestamps=0 + + Disabling SACK: + sysctl -w net.ipv4.tcp_sack=0 + + Setting large number of incoming connection requests: + sysctl -w net.ipv4.tcp_max_syn_backlog=3000 + + Setting maximum receive socket buffer size: + sysctl -w net.core.rmem_max=1024000 + + Setting maximum send socket buffer size: + sysctl -w net.core.wmem_max=1024000 + + Set smp_affinity (on a multiprocessor system) to a single CPU: + echo 1 > /proc/irq/<interrupt_number>/smp_affinity + + Setting default receive socket buffer size: + sysctl -w net.core.rmem_default=524287 + + Setting default send socket buffer size: + sysctl -w net.core.wmem_default=524287 + + Setting maximum option memory buffers: + sysctl -w net.core.optmem_max=524287 + + Setting maximum backlog (# of unprocessed packets before kernel drops): + sysctl -w net.core.netdev_max_backlog=300000 + + Setting TCP read buffers (min/default/max): + sysctl -w net.ipv4.tcp_rmem="10000000 10000000 10000000" + + Setting TCP write buffers (min/pressure/max): + sysctl -w net.ipv4.tcp_wmem="10000000 10000000 10000000" + + Setting TCP buffer space (min/pressure/max): + sysctl -w net.ipv4.tcp_mem="10000000 10000000 10000000" + + TCP window size for single connections: + The receive buffer (RX_WINDOW) size must be at least as large as the + Bandwidth-Delay Product of the communication link between the sender and + receiver. Due to the variations of RTT, you may want to increase the buffer + size up to 2 times the Bandwidth-Delay Product. Reference page 289 of + "TCP/IP Illustrated, Volume 1, The Protocols" by W. Richard Stevens. + At 10Gb speeds, use the following formula: + RX_WINDOW >= 1.25MBytes * RTT(in milliseconds) + Example for RTT with 100us: RX_WINDOW = (1,250,000 * 0.1) = 125,000 + RX_WINDOW sizes of 256KB - 512KB should be sufficient. + Setting the min, max, and default receive buffer (RX_WINDOW) size: + sysctl -w net.ipv4.tcp_rmem="<min> <default> <max>" + + TCP window size for multiple connections: + The receive buffer (RX_WINDOW) size may be calculated the same as single + connections, but should be divided by the number of connections. The + smaller window prevents congestion and facilitates better pacing, + especially if/when MAC level flow control does not work well or when it is + not supported on the machine. Experimentation may be necessary to attain + the correct value. This method is provided as a starting point fot the + correct receive buffer size. + Setting the min, max, and default receive buffer (RX_WINDOW) size is + performed in the same manner as single connection. + + +DRIVER MESSAGES +=============== + + The following messages are the most common messages logged by syslog. These + may be found in /var/log/messages. + + Driver up: + Chelsio Network Driver - version 2.1.1 + + NIC detected: + eth#: Chelsio N210 1x10GBaseX NIC (rev #), PCIX 133MHz/64-bit + + Link up: + eth#: link is up at 10 Gbps, full duplex + + Link down: + eth#: link is down + + +KNOWN ISSUES +============ + + These issues have been identified during testing. The following information + is provided as a workaround to the problem. In some cases, this problem is + inherent to Linux or to a particular Linux Distribution and/or hardware + platform. + + 1. Large number of TCP retransmits on a multiprocessor (SMP) system. + + On a system with multiple CPUs, the interrupt (IRQ) for the network + controller may be bound to more than one CPU. This will cause TCP + retransmits if the packet data were to be split across different CPUs + and re-assembled in a different order than expected. + + To eliminate the TCP retransmits, set smp_affinity on the particular + interrupt to a single CPU. You can locate the interrupt (IRQ) used on + the N110/N210 by using ifconfig: + ifconfig <dev_name> | grep Interrupt + Set the smp_affinity to a single CPU: + echo 1 > /proc/irq/<interrupt_number>/smp_affinity + + It is highly suggested that you do not run the irqbalance daemon on your + system, as this will change any smp_affinity setting you have applied. + The irqbalance daemon runs on a 10 second interval and binds interrupts + to the least loaded CPU determined by the daemon. To disable this daemon: + chkconfig --level 2345 irqbalance off + + By default, some Linux distributions enable the kernel feature, + irqbalance, which performs the same function as the daemon. To disable + this feature, add the following line to your bootloader: + noirqbalance + + Example using the Grub bootloader: + title Red Hat Enterprise Linux AS (2.4.21-27.ELsmp) + root (hd0,0) + kernel /vmlinuz-2.4.21-27.ELsmp ro root=/dev/hda3 noirqbalance + initrd /initrd-2.4.21-27.ELsmp.img + + 2. After running insmod, the driver is loaded and the incorrect network + interface is brought up without running ifup. + + When using 2.4.x kernels, including RHEL kernels, the Linux kernel + invokes a script named "hotplug". This script is primarily used to + automatically bring up USB devices when they are plugged in, however, + the script also attempts to automatically bring up a network interface + after loading the kernel module. The hotplug script does this by scanning + the ifcfg-eth# config files in /etc/sysconfig/network-scripts, looking + for HWADDR=<mac_address>. + + If the hotplug script does not find the HWADDRR within any of the + ifcfg-eth# files, it will bring up the device with the next available + interface name. If this interface is already configured for a different + network card, your new interface will have incorrect IP address and + network settings. + + To solve this issue, you can add the HWADDR=<mac_address> key to the + interface config file of your network controller. + + To disable this "hotplug" feature, you may add the driver (module name) + to the "blacklist" file located in /etc/hotplug. It has been noted that + this does not work for network devices because the net.agent script + does not use the blacklist file. Simply remove, or rename, the net.agent + script located in /etc/hotplug to disable this feature. + + 3. Transport Protocol (TP) hangs when running heavy multi-connection traffic + on an AMD Opteron system with HyperTransport PCI-X Tunnel chipset. + + If your AMD Opteron system uses the AMD-8131 HyperTransport PCI-X Tunnel + chipset, you may experience the "133-Mhz Mode Split Completion Data + Corruption" bug identified by AMD while using a 133Mhz PCI-X card on the + bus PCI-X bus. + + AMD states, "Under highly specific conditions, the AMD-8131 PCI-X Tunnel + can provide stale data via split completion cycles to a PCI-X card that + is operating at 133 Mhz", causing data corruption. + + AMD's provides three workarounds for this problem, however, Chelsio + recommends the first option for best performance with this bug: + + For 133Mhz secondary bus operation, limit the transaction length and + the number of outstanding transactions, via BIOS configuration + programming of the PCI-X card, to the following: + + Data Length (bytes): 1k + Total allowed outstanding transactions: 2 + + Please refer to AMD 8131-HT/PCI-X Errata 26310 Rev 3.08 August 2004, + section 56, "133-MHz Mode Split Completion Data Corruption" for more + details with this bug and workarounds suggested by AMD. + + It may be possible to work outside AMD's recommended PCI-X settings, try + increasing the Data Length to 2k bytes for increased performance. If you + have issues with these settings, please revert to the "safe" settings + and duplicate the problem before submitting a bug or asking for support. + + NOTE: The default setting on most systems is 8 outstanding transactions + and 2k bytes data length. + + 4. On multiprocessor systems, it has been noted that an application which + is handling 10Gb networking can switch between CPUs causing degraded + and/or unstable performance. + + If running on an SMP system and taking performance measurements, it + is suggested you either run the latest netperf-2.4.0+ or use a binding + tool such as Tim Hockin's procstate utilities (runon) + <http://www.hockin.org/~thockin/procstate/>. + + Binding netserver and netperf (or other applications) to particular + CPUs will have a significant difference in performance measurements. + You may need to experiment which CPU to bind the application to in + order to achieve the best performance for your system. + + If you are developing an application designed for 10Gb networking, + please keep in mind you may want to look at kernel functions + sched_setaffinity & sched_getaffinity to bind your application. + + If you are just running user-space applications such as ftp, telnet, + etc., you may want to try the runon tool provided by Tim Hockin's + procstate utility. You could also try binding the interface to a + particular CPU: runon 0 ifup eth0 + + +SUPPORT +======= + + If you have problems with the software or hardware, please contact our + customer support team via email at support@chelsio.com or check our website + at http://www.chelsio.com + +=============================================================================== + + Chelsio Communications + 370 San Aleso Ave. + Suite 100 + Sunnyvale, CA 94085 + http://www.chelsio.com + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License, version 2, as +published by the Free Software Foundation. + +You should have received a copy of the GNU General Public License along +with this program; if not, write to the Free Software Foundation, Inc., +59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED +WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. + + Copyright (c) 2003-2005 Chelsio Communications. All rights reserved. + +=============================================================================== diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index a18ecb92b356..5c49ba07e709 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -132,6 +132,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. mpu_irq - IRQ # for MPU-401 UART (PnP setup) dma1 - first DMA # for AD1816A chip (PnP setup) dma2 - second DMA # for AD1816A chip (PnP setup) + clockfreq - Clock frequency for AD1816A chip (default = 0, 33000Hz) Module supports up to 8 cards, autoprobe and PnP. diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl index db0b7d2dc477..0475478c2484 100644 --- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl +++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl @@ -3422,10 +3422,17 @@ struct _snd_pcm_runtime { <para> The <structfield>iface</structfield> field specifies the type of - the control, - <constant>SNDRV_CTL_ELEM_IFACE_XXX</constant>. There are - <constant>MIXER</constant>, <constant>PCM</constant>, - <constant>CARD</constant>, etc. + the control, <constant>SNDRV_CTL_ELEM_IFACE_XXX</constant>, which + is usually <constant>MIXER</constant>. + Use <constant>CARD</constant> for global controls that are not + logically part of the mixer. + If the control is closely associated with some specific device on + the sound card, use <constant>HWDEP</constant>, + <constant>PCM</constant>, <constant>RAWMIDI</constant>, + <constant>TIMER</constant>, or <constant>SEQUENCER</constant>, and + specify the device number with the + <structfield>device</structfield> and + <structfield>subdevice</structfield> fields. </para> <para> diff --git a/MAINTAINERS b/MAINTAINERS index 564a03e61a0c..e8214fe53a5e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2092,6 +2092,12 @@ M: support@simtec.co.uk W: http://www.simtec.co.uk/products/EB2410ITX/ S: Supported +SIS 190 ETHERNET DRIVER +P: Francois Romieu +M: romieu@fr.zoreil.com +L: netdev@vger.kernel.org +S: Maintained + SIS 5513 IDE CONTROLLER DRIVER P: Lionel Bouton M: Lionel.Bouton@inet6.fr diff --git a/arch/i386/pci/common.c b/arch/i386/pci/common.c index ade5bc57c34c..c96bea14b98f 100644 --- a/arch/i386/pci/common.c +++ b/arch/i386/pci/common.c @@ -165,7 +165,6 @@ static int __init pcibios_init(void) if ((pci_probe & PCI_BIOS_SORT) && !(pci_probe & PCI_NO_SORT)) pcibios_sort(); #endif - pci_assign_unassigned_resources(); return 0; } diff --git a/arch/i386/pci/i386.c b/arch/i386/pci/i386.c index 93a364c82150..3cc480998a47 100644 --- a/arch/i386/pci/i386.c +++ b/arch/i386/pci/i386.c @@ -170,43 +170,26 @@ static void __init pcibios_allocate_resources(int pass) static int __init pcibios_assign_resources(void) { struct pci_dev *dev = NULL; - int idx; - struct resource *r; - - for_each_pci_dev(dev) { - int class = dev->class >> 8; - - /* Don't touch classless devices and host bridges */ - if (!class || class == PCI_CLASS_BRIDGE_HOST) - continue; - - for(idx=0; idx<6; idx++) { - r = &dev->resource[idx]; - - /* - * Don't touch IDE controllers and I/O ports of video cards! - */ - if ((class == PCI_CLASS_STORAGE_IDE && idx < 4) || - (class == PCI_CLASS_DISPLAY_VGA && (r->flags & IORESOURCE_IO))) - continue; - - /* - * We shall assign a new address to this resource, either because - * the BIOS forgot to do so or because we have decided the old - * address was unusable for some reason. - */ - if (!r->start && r->end) - pci_assign_resource(dev, idx); - } + struct resource *r, *pr; - if (pci_probe & PCI_ASSIGN_ROMS) { + if (!(pci_probe & PCI_ASSIGN_ROMS)) { + /* Try to use BIOS settings for ROMs, otherwise let + pci_assign_unassigned_resources() allocate the new + addresses. */ + for_each_pci_dev(dev) { r = &dev->resource[PCI_ROM_RESOURCE]; - r->end -= r->start; - r->start = 0; - if (r->end) - pci_assign_resource(dev, PCI_ROM_RESOURCE); + if (!r->flags || !r->start) + continue; + pr = pci_find_parent_resource(dev, r); + if (!pr || request_resource(pr, r) < 0) { + r->end -= r->start; + r->start = 0; + } } } + + pci_assign_unassigned_resources(); + return 0; } diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c index a3702cfe8f7c..4c888da89b3c 100644 --- a/arch/ppc/syslib/m8xx_setup.c +++ b/arch/ppc/syslib/m8xx_setup.c @@ -57,7 +57,7 @@ unsigned char __res[sizeof(bd_t)]; extern void m8xx_ide_init(void); extern unsigned long find_available_memory(void); -extern void m8xx_cpm_reset(); +extern void m8xx_cpm_reset(void); extern void m8xx_wdt_handler_install(bd_t *bp); extern void rpxfb_alloc_pages(void); extern void cpm_interrupt_init(void); @@ -266,8 +266,8 @@ m8xx_show_percpuinfo(struct seq_file *m, int i) bp = (bd_t *)__res; - seq_printf(m, "clock\t\t: %ldMHz\n" - "bus clock\t: %ldMHz\n", + seq_printf(m, "clock\t\t: %uMHz\n" + "bus clock\t: %uMHz\n", bp->bi_intfreq / 1000000, bp->bi_busfreq / 1000000); diff --git a/drivers/char/drm/Kconfig b/drivers/char/drm/Kconfig index 123417e43040..56ace9d5e2ae 100644 --- a/drivers/char/drm/Kconfig +++ b/drivers/char/drm/Kconfig @@ -23,13 +23,6 @@ config DRM_TDFX Choose this option if you have a 3dfx Banshee or Voodoo3 (or later), graphics card. If M is selected, the module will be called tdfx. -config DRM_GAMMA - tristate "3dlabs GMX 2000" - depends on DRM && BROKEN - help - This is the old gamma driver, please tell me if it might actually - work. - config DRM_R128 tristate "ATI Rage 128" depends on DRM && PCI @@ -82,7 +75,7 @@ endchoice config DRM_MGA tristate "Matrox g200/g400" - depends on DRM && AGP + depends on DRM help Choose this option if you have a Matrox G200, G400 or G450 graphics card. If M is selected, the module will be called mga. AGP @@ -103,3 +96,10 @@ config DRM_VIA Choose this option if you have a Via unichrome or compatible video chipset. If M is selected the module will be called via. +config DRM_SAVAGE + tristate "Savage video cards" + depends on DRM + help + Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister + chipset. If M is selected the module will be called savage. + diff --git a/drivers/char/drm/Makefile b/drivers/char/drm/Makefile index ddd941045b1f..e41060c76226 100644 --- a/drivers/char/drm/Makefile +++ b/drivers/char/drm/Makefile @@ -8,16 +8,16 @@ drm-objs := drm_auth.o drm_bufs.o drm_context.o drm_dma.o drm_drawable.o \ drm_agpsupport.o drm_scatter.o ati_pcigart.o drm_pci.o \ drm_sysfs.o -gamma-objs := gamma_drv.o gamma_dma.o tdfx-objs := tdfx_drv.o r128-objs := r128_drv.o r128_cce.o r128_state.o r128_irq.o mga-objs := mga_drv.o mga_dma.o mga_state.o mga_warp.o mga_irq.o i810-objs := i810_drv.o i810_dma.o i830-objs := i830_drv.o i830_dma.o i830_irq.o i915-objs := i915_drv.o i915_dma.o i915_irq.o i915_mem.o -radeon-objs := radeon_drv.o radeon_cp.o radeon_state.o radeon_mem.o radeon_irq.o +radeon-objs := radeon_drv.o radeon_cp.o radeon_state.o radeon_mem.o radeon_irq.o r300_cmdbuf.o ffb-objs := ffb_drv.o ffb_context.o sis-objs := sis_drv.o sis_ds.o sis_mm.o +savage-objs := savage_drv.o savage_bci.o savage_state.o via-objs := via_irq.o via_drv.o via_ds.o via_map.o via_mm.o via_dma.o via_verifier.o via_video.o ifeq ($(CONFIG_COMPAT),y) @@ -29,7 +29,6 @@ i915-objs += i915_ioc32.o endif obj-$(CONFIG_DRM) += drm.o -obj-$(CONFIG_DRM_GAMMA) += gamma.o obj-$(CONFIG_DRM_TDFX) += tdfx.o obj-$(CONFIG_DRM_R128) += r128.o obj-$(CONFIG_DRM_RADEON)+= radeon.o @@ -39,5 +38,7 @@ obj-$(CONFIG_DRM_I830) += i830.o obj-$(CONFIG_DRM_I915) += i915.o obj-$(CONFIG_DRM_FFB) += ffb.o obj-$(CONFIG_DRM_SIS) += sis.o +obj-$(CONFIG_DRM_SAVAGE)+= savage.o obj-$(CONFIG_DRM_VIA) +=via.o + diff --git a/drivers/char/drm/drm.h b/drivers/char/drm/drm.h index e8371dd87fbc..fc6598a81acd 100644 --- a/drivers/char/drm/drm.h +++ b/drivers/char/drm/drm.h @@ -98,7 +98,7 @@ #define _DRM_LOCKING_CONTEXT(lock) ((lock) & ~(_DRM_LOCK_HELD|_DRM_LOCK_CONT)) -typedef unsigned long drm_handle_t; +typedef unsigned int drm_handle_t; typedef unsigned int drm_context_t; typedef unsigned int drm_drawable_t; typedef unsigned int drm_magic_t; @@ -209,7 +209,8 @@ typedef enum drm_map_type { _DRM_REGISTERS = 1, /**< no caching, no core dump */ _DRM_SHM = 2, /**< shared, cached */ _DRM_AGP = 3, /**< AGP/GART */ - _DRM_SCATTER_GATHER = 4 /**< Scatter/gather memory for PCI DMA */ + _DRM_SCATTER_GATHER = 4, /**< Scatter/gather memory for PCI DMA */ + _DRM_CONSISTENT = 5, /**< Consistent memory for PCI DMA */ } drm_map_type_t; @@ -368,7 +369,8 @@ typedef struct drm_buf_desc { enum { _DRM_PAGE_ALIGN = 0x01, /**< Align on page boundaries for DMA */ _DRM_AGP_BUFFER = 0x02, /**< Buffer is in AGP space */ - _DRM_SG_BUFFER = 0x04 /**< Scatter/gather memory buffer */ + _DRM_SG_BUFFER = 0x04, /**< Scatter/gather memory buffer */ + _DRM_FB_BUFFER = 0x08 /**< Buffer is in frame buffer */ } flags; unsigned long agp_start; /**< * Start address of where the AGP buffers are diff --git a/drivers/char/drm/drmP.h b/drivers/char/drm/drmP.h index 5df09cc8c6db..6f98701dfe15 100644 --- a/drivers/char/drm/drmP.h +++ b/drivers/char/drm/drmP.h @@ -53,7 +53,6 @@ #include <linux/init.h> #include <linux/file.h> #include <linux/pci.h> -#include <linux/version.h> #include <linux/jiffies.h> #include <linux/smp_lock.h> /* For (un)lock_kernel */ #include <linux/mm.h> @@ -96,6 +95,7 @@ #define DRIVER_IRQ_SHARED 0x80 #define DRIVER_IRQ_VBL 0x100 #define DRIVER_DMA_QUEUE 0x200 +#define DRIVER_FB_DMA 0x400 /***********************************************************************/ /** \name Begin the DRM... */ @@ -160,36 +160,7 @@ #define pte_unmap(pte) #endif -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,19) -static inline struct page * vmalloc_to_page(void * vmalloc_addr) -{ - unsigned long addr = (unsigned long) vmalloc_addr; - struct page *page = NULL; - pgd_t *pgd = pgd_offset_k(addr); - pmd_t *pmd; - pte_t *ptep, pte; - - if (!pgd_none(*pgd)) { - pmd = pmd_offset(pgd, addr); - if (!pmd_none(*pmd)) { - preempt_disable(); - ptep = pte_offset_map(pmd, addr); - pte = *ptep; - if (pte_present(pte)) - page = pte_page(pte); - pte_unmap(ptep); - preempt_enable(); - } - } - return page; -} -#endif - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -#define DRM_RPR_ARG(vma) -#else #define DRM_RPR_ARG(vma) vma, -#endif #define VM_OFFSET(vma) ((vma)->vm_pgoff << PAGE_SHIFT) @@ -474,7 +445,8 @@ typedef struct drm_device_dma { unsigned long byte_count; enum { _DRM_DMA_USE_AGP = 0x01, - _DRM_DMA_USE_SG = 0x02 + _DRM_DMA_USE_SG = 0x02, + _DRM_DMA_USE_FB = 0x04 } flags; } drm_device_dma_t; @@ -525,12 +497,19 @@ typedef struct drm_sigdata { drm_hw_lock_t *lock; } drm_sigdata_t; +typedef struct drm_dma_handle { + dma_addr_t busaddr; + void *vaddr; + size_t size; +} drm_dma_handle_t; + /** * Mappings list */ typedef struct drm_map_list { struct list_head head; /**< list head */ drm_map_t *map; /**< mapping */ + unsigned int user_token; } drm_map_list_t; typedef drm_map_t drm_local_map_t; @@ -578,7 +557,22 @@ struct drm_driver { int (*kernel_context_switch)(struct drm_device *dev, int old, int new); void (*kernel_context_switch_unlock)(struct drm_device *dev, drm_lock_t *lock); int (*vblank_wait)(struct drm_device *dev, unsigned int *sequence); + + /** + * Called by \c drm_device_is_agp. Typically used to determine if a + * card is really attached to AGP or not. + * + * \param dev DRM device handle + * + * \returns + * One of three values is returned depending on whether or not the + * card is absolutely \b not AGP (return of 0), absolutely \b is AGP + * (return of 1), or may or may not be AGP (return of 2). + */ + int (*device_is_agp) (struct drm_device * dev); + /* these have to be filled in */ + int (*postinit)(struct drm_device *, unsigned long flags); irqreturn_t (*irq_handler)( DRM_IRQ_ARGS ); void (*irq_preinstall)(struct drm_device *dev); @@ -722,12 +716,8 @@ typedef struct drm_device { int pci_slot; /**< PCI slot number */ int pci_func; /**< PCI function number */ #ifdef __alpha__ -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,3) - struct pci_controler *hose; -#else struct pci_controller *hose; #endif -#endif drm_sg_mem_t *sg; /**< Scatter gather memory */ unsigned long *ctx_bitmap; /**< context bitmap */ void *dev_private; /**< device private data */ @@ -736,6 +726,7 @@ typedef struct drm_device { struct drm_driver *driver; drm_local_map_t *agp_buffer_map; + unsigned int agp_buffer_token; drm_head_t primary; /**< primary screen head */ } drm_device_t; @@ -806,7 +797,7 @@ extern void *drm_ioremap_nocache(unsigned long offset, unsigned long size, drm_device_t *dev); extern void drm_ioremapfree(void *pt, unsigned long size, drm_device_t *dev); -extern DRM_AGP_MEM *drm_alloc_agp(struct agp_bridge_data *bridge, int pages, u32 type); +extern DRM_AGP_MEM *drm_alloc_agp(drm_device_t *dev, int pages, u32 type); extern int drm_free_agp(DRM_AGP_MEM *handle, int pages); extern int drm_bind_agp(DRM_AGP_MEM *handle, unsigned int start); extern int drm_unbind_agp(DRM_AGP_MEM *handle); @@ -881,11 +872,19 @@ extern int drm_lock_free(drm_device_t *dev, unsigned int context); /* Buffer management support (drm_bufs.h) */ +extern int drm_addbufs_agp(drm_device_t *dev, drm_buf_desc_t *request); +extern int drm_addbufs_pci(drm_device_t *dev, drm_buf_desc_t *request); +extern int drm_addmap(drm_device_t *dev, unsigned int offset, + unsigned int size, drm_map_type_t type, + drm_map_flags_t flags, drm_local_map_t **map_ptr); +extern int drm_addmap_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg); +extern int drm_rmmap(drm_device_t *dev, drm_local_map_t *map); +extern int drm_rmmap_locked(drm_device_t *dev, drm_local_map_t *map); +extern int drm_rmmap_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg); + extern int drm_order( unsigned long size ); -extern int drm_addmap( struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg ); -extern int drm_rmmap( struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg ); extern int drm_addbufs( struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg ); extern int drm_infobufs( struct inode *inode, struct file *filp, @@ -896,6 +895,10 @@ extern int drm_freebufs( struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg ); extern int drm_mapbufs( struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg ); +extern unsigned long drm_get_resource_start(drm_device_t *dev, + unsigned int resource); +extern unsigned long drm_get_resource_len(drm_device_t *dev, + unsigned int resource); /* DMA support (drm_dma.h) */ extern int drm_dma_setup(drm_device_t *dev); @@ -919,15 +922,18 @@ extern void drm_vbl_send_signals( drm_device_t *dev ); /* AGP/GART support (drm_agpsupport.h) */ extern drm_agp_head_t *drm_agp_init(drm_device_t *dev); -extern int drm_agp_acquire(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg); -extern void drm_agp_do_release(drm_device_t *dev); -extern int drm_agp_release(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg); -extern int drm_agp_enable(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg); -extern int drm_agp_info(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg); +extern int drm_agp_acquire(drm_device_t * dev); +extern int drm_agp_acquire_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg); +extern int drm_agp_release(drm_device_t *dev); +extern int drm_agp_release_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg); +extern int drm_agp_enable(drm_device_t *dev, drm_agp_mode_t mode); +extern int drm_agp_enable_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg); +extern int drm_agp_info(drm_device_t * dev, drm_agp_info_t *info); +extern int drm_agp_info_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg); extern int drm_agp_alloc(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg); extern int drm_agp_free(struct inode *inode, struct file *filp, @@ -976,12 +982,10 @@ extern int drm_ati_pcigart_cleanup(drm_device_t *dev, unsigned long addr, dma_addr_t bus_addr); -extern void *drm_pci_alloc(drm_device_t * dev, size_t size, - size_t align, dma_addr_t maxaddr, - dma_addr_t * busaddr); - -extern void drm_pci_free(drm_device_t * dev, size_t size, - void *vaddr, dma_addr_t busaddr); +extern drm_dma_handle_t *drm_pci_alloc(drm_device_t *dev, size_t size, + size_t align, dma_addr_t maxaddr); +extern void __drm_pci_free(drm_device_t *dev, drm_dma_handle_t *dmah); +extern void drm_pci_free(drm_device_t *dev, drm_dma_handle_t *dmah); /* sysfs support (drm_sysfs.c) */ struct drm_sysfs_class; @@ -1012,17 +1016,26 @@ static __inline__ void drm_core_ioremapfree(struct drm_map *map, struct drm_devi drm_ioremapfree( map->handle, map->size, dev ); } -static __inline__ struct drm_map *drm_core_findmap(struct drm_device *dev, unsigned long offset) +static __inline__ struct drm_map *drm_core_findmap(struct drm_device *dev, unsigned int token) { - struct list_head *_list; - list_for_each( _list, &dev->maplist->head ) { - drm_map_list_t *_entry = list_entry( _list, drm_map_list_t, head ); - if ( _entry->map && - _entry->map->offset == offset ) { + drm_map_list_t *_entry; + list_for_each_entry(_entry, &dev->maplist->head, head) + if (_entry->user_token == token) return _entry->map; + return NULL; +} + +static __inline__ int drm_device_is_agp(drm_device_t *dev) +{ + if ( dev->driver->device_is_agp != NULL ) { + int err = (*dev->driver->device_is_agp)( dev ); + + if (err != 2) { + return err; } } - return NULL; + + return pci_find_capability(dev->pdev, PCI_CAP_ID_AGP); } static __inline__ void drm_core_dropmap(struct drm_map *map) diff --git a/drivers/char/drm/drm_agpsupport.c b/drivers/char/drm/drm_agpsupport.c index 8d94c0b5fa44..8c215adcb4b2 100644 --- a/drivers/char/drm/drm_agpsupport.c +++ b/drivers/char/drm/drm_agpsupport.c @@ -37,7 +37,7 @@ #if __OS_HAS_AGP /** - * AGP information ioctl. + * Get AGP information. * * \param inode device inode. * \param filp file pointer. @@ -48,51 +48,56 @@ * Verifies the AGP device has been initialized and acquired and fills in the * drm_agp_info structure with the information in drm_agp_head::agp_info. */ -int drm_agp_info(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) +int drm_agp_info(drm_device_t *dev, drm_agp_info_t *info) { - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->head->dev; DRM_AGP_KERN *kern; - drm_agp_info_t info; if (!dev->agp || !dev->agp->acquired) return -EINVAL; kern = &dev->agp->agp_info; - info.agp_version_major = kern->version.major; - info.agp_version_minor = kern->version.minor; - info.mode = kern->mode; - info.aperture_base = kern->aper_base; - info.aperture_size = kern->aper_size * 1024 * 1024; - info.memory_allowed = kern->max_memory << PAGE_SHIFT; - info.memory_used = kern->current_memory << PAGE_SHIFT; - info.id_vendor = kern->device->vendor; - info.id_device = kern->device->device; - - if (copy_to_user((drm_agp_info_t __user *)arg, &info, sizeof(info))) + info->agp_version_major = kern->version.major; + info->agp_version_minor = kern->version.minor; + info->mode = kern->mode; + info->aperture_base = kern->aper_base; + info->aperture_size = kern->aper_size * 1024 * 1024; + info->memory_allowed = kern->max_memory << PAGE_SHIFT; + info->memory_used = kern->current_memory << PAGE_SHIFT; + info->id_vendor = kern->device->vendor; + info->id_device = kern->device->device; + + return 0; +} +EXPORT_SYMBOL(drm_agp_info); + +int drm_agp_info_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg) +{ + drm_file_t *priv = filp->private_data; + drm_device_t *dev = priv->head->dev; + drm_agp_info_t info; + int err; + + err = drm_agp_info(dev, &info); + if (err) + return err; + + if (copy_to_user((drm_agp_info_t __user *) arg, &info, sizeof(info))) return -EFAULT; return 0; } /** - * Acquire the AGP device (ioctl). + * Acquire the AGP device. * - * \param inode device inode. - * \param filp file pointer. - * \param cmd command. - * \param arg user argument. + * \param dev DRM device that is to acquire AGP * \return zero on success or a negative number on failure. * * Verifies the AGP device hasn't been acquired before and calls - * agp_acquire(). + * \c agp_backend_acquire. */ -int drm_agp_acquire(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) +int drm_agp_acquire(drm_device_t *dev) { - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->head->dev; - if (!dev->agp) return -ENODEV; if (dev->agp->acquired) @@ -102,9 +107,10 @@ int drm_agp_acquire(struct inode *inode, struct file *filp, dev->agp->acquired = 1; return 0; } +EXPORT_SYMBOL(drm_agp_acquire); /** - * Release the AGP device (ioctl). + * Acquire the AGP device (ioctl). * * \param inode device inode. * \param filp file pointer. @@ -112,63 +118,80 @@ int drm_agp_acquire(struct inode *inode, struct file *filp, * \param arg user argument. * \return zero on success or a negative number on failure. * - * Verifies the AGP device has been acquired and calls agp_backend_release(). + * Verifies the AGP device hasn't been acquired before and calls + * \c agp_backend_acquire. */ -int drm_agp_release(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) +int drm_agp_acquire_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg) { - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->head->dev; + drm_file_t *priv = filp->private_data; + + return drm_agp_acquire( (drm_device_t *) priv->head->dev ); +} +/** + * Release the AGP device. + * + * \param dev DRM device that is to release AGP + * \return zero on success or a negative number on failure. + * + * Verifies the AGP device has been acquired and calls \c agp_backend_release. + */ +int drm_agp_release(drm_device_t *dev) +{ if (!dev->agp || !dev->agp->acquired) return -EINVAL; agp_backend_release(dev->agp->bridge); dev->agp->acquired = 0; return 0; - } +EXPORT_SYMBOL(drm_agp_release); -/** - * Release the AGP device. - * - * Calls agp_backend_release(). - */ -void drm_agp_do_release(drm_device_t *dev) +int drm_agp_release_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg) { - agp_backend_release(dev->agp->bridge); + drm_file_t *priv = filp->private_data; + drm_device_t *dev = priv->head->dev; + + return drm_agp_release(dev); } /** * Enable the AGP bus. * - * \param inode device inode. - * \param filp file pointer. - * \param cmd command. - * \param arg pointer to a drm_agp_mode structure. + * \param dev DRM device that has previously acquired AGP. + * \param mode Requested AGP mode. * \return zero on success or a negative number on failure. * * Verifies the AGP device has been acquired but not enabled, and calls - * agp_enable(). + * \c agp_enable. */ -int drm_agp_enable(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) +int drm_agp_enable(drm_device_t *dev, drm_agp_mode_t mode) { - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->head->dev; - drm_agp_mode_t mode; - if (!dev->agp || !dev->agp->acquired) return -EINVAL; - if (copy_from_user(&mode, (drm_agp_mode_t __user *)arg, sizeof(mode))) - return -EFAULT; - dev->agp->mode = mode.mode; agp_enable(dev->agp->bridge, mode.mode); dev->agp->base = dev->agp->agp_info.aper_base; dev->agp->enabled = 1; return 0; } +EXPORT_SYMBOL(drm_agp_enable); + +int drm_agp_enable_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg) +{ + drm_file_t *priv = filp->private_data; + drm_device_t *dev = priv->head->dev; + drm_agp_mode_t mode; + + + if (copy_from_user(&mode, (drm_agp_mode_t __user *) arg, sizeof(mode))) + return -EFAULT; + + return drm_agp_enable(dev, mode); +} /** * Allocate AGP memory. @@ -206,7 +229,7 @@ int drm_agp_alloc(struct inode *inode, struct file *filp, pages = (request.size + PAGE_SIZE - 1) / PAGE_SIZE; type = (u32) request.type; - if (!(memory = drm_alloc_agp(dev->agp->bridge, pages, type))) { + if (!(memory = drm_alloc_agp(dev, pages, type))) { drm_free(entry, sizeof(*entry), DRM_MEM_AGPLISTS); return -ENOMEM; } @@ -403,13 +426,8 @@ drm_agp_head_t *drm_agp_init(drm_device_t *dev) return NULL; } head->memory = NULL; -#if LINUX_VERSION_CODE <= 0x020408 - head->cant_use_aperture = 0; - head->page_mask = ~(0xfff); -#else head->cant_use_aperture = head->agp_info.cant_use_aperture; head->page_mask = head->agp_info.page_mask; -#endif return head; } @@ -436,6 +454,7 @@ int drm_agp_bind_memory(DRM_AGP_MEM *handle, off_t start) return -EINVAL; return agp_bind_memory(handle, start); } +EXPORT_SYMBOL(drm_agp_bind_memory); /** Calls agp_unbind_memory() */ int drm_agp_unbind_memory(DRM_AGP_MEM *handle) diff --git a/drivers/char/drm/drm_bufs.c b/drivers/char/drm/drm_bufs.c index 4c6191d231b8..e0743ebbe4bd 100644 --- a/drivers/char/drm/drm_bufs.c +++ b/drivers/char/drm/drm_bufs.c @@ -36,37 +36,69 @@ #include <linux/vmalloc.h> #include "drmP.h" -/** - * Compute size order. Returns the exponent of the smaller power of two which - * is greater or equal to given number. - * - * \param size size. - * \return order. - * - * \todo Can be made faster. - */ -int drm_order( unsigned long size ) +unsigned long drm_get_resource_start(drm_device_t *dev, unsigned int resource) { - int order; - unsigned long tmp; + return pci_resource_start(dev->pdev, resource); +} +EXPORT_SYMBOL(drm_get_resource_start); - for (order = 0, tmp = size >> 1; tmp; tmp >>= 1, order++) - ; +unsigned long drm_get_resource_len(drm_device_t *dev, unsigned int resource) +{ + return pci_resource_len(dev->pdev, resource); +} +EXPORT_SYMBOL(drm_get_resource_len); - if (size & (size - 1)) - ++order; +static drm_local_map_t *drm_find_matching_map(drm_device_t *dev, + drm_local_map_t *map) +{ + struct list_head *list; - return order; + list_for_each(list, &dev->maplist->head) { + drm_map_list_t *entry = list_entry(list, drm_map_list_t, head); + if (entry->map && map->type == entry->map->type && + entry->map->offset == map->offset) { + return entry->map; + } + } + + return NULL; } -EXPORT_SYMBOL(drm_order); -#ifdef CONFIG_COMPAT /* - * Used to allocate 32-bit handles for _DRM_SHM regions - * The 0x10000000 value is chosen to be out of the way of - * FB/register and GART physical addresses. + * Used to allocate 32-bit handles for mappings. */ -static unsigned int map32_handle = 0x10000000; +#define START_RANGE 0x10000000 +#define END_RANGE 0x40000000 + +#ifdef _LP64 +static __inline__ unsigned int HandleID(unsigned long lhandle, drm_device_t *dev) +{ + static unsigned int map32_handle = START_RANGE; + unsigned int hash; + + if (lhandle & 0xffffffff00000000) { + hash = map32_handle; + map32_handle += PAGE_SIZE; + if (map32_handle > END_RANGE) + map32_handle = START_RANGE; + } else + hash = lhandle; + + while (1) { + drm_map_list_t *_entry; + list_for_each_entry(_entry, &dev->maplist->head,head) { + if (_entry->user_token == hash) + break; + } + if (&_entry->head == &dev->maplist->head) + return hash; + + hash += PAGE_SIZE; + map32_handle += PAGE_SIZE; + } +} +#else +# define HandleID(x,dev) (unsigned int)(x) #endif /** @@ -82,25 +114,23 @@ static unsigned int map32_handle = 0x10000000; * type. Adds the map to the map list drm_device::maplist. Adds MTRR's where * applicable and if supported by the kernel. */ -int drm_addmap( struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg ) +int drm_addmap(drm_device_t * dev, unsigned int offset, + unsigned int size, drm_map_type_t type, + drm_map_flags_t flags, drm_local_map_t ** map_ptr) { - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->head->dev; drm_map_t *map; - drm_map_t __user *argp = (void __user *)arg; drm_map_list_t *list; - - if ( !(filp->f_mode & 3) ) return -EACCES; /* Require read/write */ + drm_dma_handle_t *dmah; + drm_local_map_t *found_map; map = drm_alloc( sizeof(*map), DRM_MEM_MAPS ); if ( !map ) return -ENOMEM; - if ( copy_from_user( map, argp, sizeof(*map) ) ) { - drm_free( map, sizeof(*map), DRM_MEM_MAPS ); - return -EFAULT; - } + map->offset = offset; + map->size = size; + map->flags = flags; + map->type = type; /* Only allow shared memory to be removable since we only keep enough * book keeping information about shared memory to allow for removal @@ -122,7 +152,7 @@ int drm_addmap( struct inode *inode, struct file *filp, switch ( map->type ) { case _DRM_REGISTERS: case _DRM_FRAME_BUFFER: -#if !defined(__sparc__) && !defined(__alpha__) && !defined(__ia64__) +#if !defined(__sparc__) && !defined(__alpha__) && !defined(__ia64__) && !defined(__powerpc64__) && !defined(__x86_64__) if ( map->offset + map->size < map->offset || map->offset < virt_to_phys(high_memory) ) { drm_free( map, sizeof(*map), DRM_MEM_MAPS ); @@ -132,6 +162,24 @@ int drm_addmap( struct inode *inode, struct file *filp, #ifdef __alpha__ map->offset += dev->hose->mem_space->start; #endif + /* Some drivers preinitialize some maps, without the X Server + * needing to be aware of it. Therefore, we just return success + * when the server tries to create a duplicate map. + */ + found_map = drm_find_matching_map(dev, map); + if (found_map != NULL) { + if (found_map->size != map->size) { + DRM_DEBUG("Matching maps of type %d with " + "mismatched sizes, (%ld vs %ld)\n", + map->type, map->size, found_map->size); + found_map->size = map->size; + } + + drm_free(map, sizeof(*map), DRM_MEM_MAPS); + *map_ptr = found_map; + return 0; + } + if (drm_core_has_MTRR(dev)) { if ( map->type == _DRM_FRAME_BUFFER || (map->flags & _DRM_WRITE_COMBINING) ) { @@ -178,9 +226,22 @@ int drm_addmap( struct inode *inode, struct file *filp, drm_free(map, sizeof(*map), DRM_MEM_MAPS); return -EINVAL; } - map->offset += dev->sg->handle; + map->offset += (unsigned long)dev->sg->virtual; + break; + case _DRM_CONSISTENT: + /* dma_addr_t is 64bit on i386 with CONFIG_HIGHMEM64G, + * As we're limiting the address to 2^32-1 (or less), + * casting it down to 32 bits is no problem, but we + * need to point to a 64bit variable first. */ + dmah = drm_pci_alloc(dev, map->size, map->size, 0xffffffffUL); + if (!dmah) { + drm_free(map, sizeof(*map), DRM_MEM_MAPS); + return -ENOMEM; + } + map->handle = dmah->vaddr; + map->offset = (unsigned long)dmah->busaddr; + kfree(dmah); break; - default: drm_free( map, sizeof(*map), DRM_MEM_MAPS ); return -EINVAL; @@ -196,17 +257,56 @@ int drm_addmap( struct inode *inode, struct file *filp, down(&dev->struct_sem); list_add(&list->head, &dev->maplist->head); -#ifdef CONFIG_COMPAT - /* Assign a 32-bit handle for _DRM_SHM mappings */ + /* Assign a 32-bit handle */ /* We do it here so that dev->struct_sem protects the increment */ - if (map->type == _DRM_SHM) - map->offset = map32_handle += PAGE_SIZE; -#endif + list->user_token = HandleID(map->type==_DRM_SHM + ? (unsigned long)map->handle + : map->offset, dev); up(&dev->struct_sem); - if ( copy_to_user( argp, map, sizeof(*map) ) ) + *map_ptr = map; + return 0; +} +EXPORT_SYMBOL(drm_addmap); + +int drm_addmap_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg) +{ + drm_file_t *priv = filp->private_data; + drm_device_t *dev = priv->head->dev; + drm_map_t map; + drm_map_t *map_ptr; + drm_map_t __user *argp = (void __user *)arg; + int err; + unsigned long handle = 0; + + if (!(filp->f_mode & 3)) + return -EACCES; /* Require read/write */ + + if (copy_from_user(& map, argp, sizeof(map))) { + return -EFAULT; + } + + err = drm_addmap(dev, map.offset, map.size, map.type, map.flags, + &map_ptr); + + if (err) { + return err; + } + + { + drm_map_list_t *_entry; + list_for_each_entry(_entry, &dev->maplist->head, head) { + if (_entry->map == map_ptr) + handle = _entry->user_token; + } + if (!handle) + return -EFAULT; + } + + if (copy_to_user(argp, map_ptr, sizeof(*map_ptr))) return -EFAULT; - if (copy_to_user(&argp->handle, &map->offset, sizeof(map->offset))) + if (put_user(handle, &argp->handle)) return -EFAULT; return 0; } @@ -226,81 +326,138 @@ int drm_addmap( struct inode *inode, struct file *filp, * its being used, and free any associate resource (such as MTRR's) if it's not * being on use. * - * \sa addmap(). + * \sa drm_addmap */ -int drm_rmmap(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) +int drm_rmmap_locked(drm_device_t *dev, drm_local_map_t *map) { - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->head->dev; struct list_head *list; drm_map_list_t *r_list = NULL; - drm_vma_entry_t *pt, *prev; - drm_map_t *map; + drm_dma_handle_t dmah; + + /* Find the list entry for the map and remove it */ + list_for_each(list, &dev->maplist->head) { + r_list = list_entry(list, drm_map_list_t, head); + + if (r_list->map == map) { + list_del(list); + drm_free(list, sizeof(*list), DRM_MEM_MAPS); + break; + } + } + + /* List has wrapped around to the head pointer, or it's empty and we + * didn't find anything. + */ + if (list == (&dev->maplist->head)) { + return -EINVAL; + } + + switch (map->type) { + case _DRM_REGISTERS: + drm_ioremapfree(map->handle, map->size, dev); + /* FALLTHROUGH */ + case _DRM_FRAME_BUFFER: + if (drm_core_has_MTRR(dev) && map->mtrr >= 0) { + int retcode; + retcode = mtrr_del(map->mtrr, map->offset, + map->size); + DRM_DEBUG ("mtrr_del=%d\n", retcode); + } + break; + case _DRM_SHM: + vfree(map->handle); + break; + case _DRM_AGP: + case _DRM_SCATTER_GATHER: + break; + case _DRM_CONSISTENT: + dmah.vaddr = map->handle; + dmah.busaddr = map->offset; + dmah.size = map->size; + __drm_pci_free(dev, &dmah); + break; + } + drm_free(map, sizeof(*map), DRM_MEM_MAPS); + + return 0; +} +EXPORT_SYMBOL(drm_rmmap_locked); + +int drm_rmmap(drm_device_t *dev, drm_local_map_t *map) +{ + int ret; + + down(&dev->struct_sem); + ret = drm_rmmap_locked(dev, map); + up(&dev->struct_sem); + + return ret; +} +EXPORT_SYMBOL(drm_rmmap); + +/* The rmmap ioctl appears to be unnecessary. All mappings are torn down on + * the last close of the device, and this is necessary for cleanup when things + * exit uncleanly. Therefore, having userland manually remove mappings seems + * like a pointless exercise since they're going away anyway. + * + * One use case might be after addmap is allowed for normal users for SHM and + * gets used by drivers that the server doesn't need to care about. This seems + * unlikely. + */ +int drm_rmmap_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg) +{ + drm_file_t *priv = filp->private_data; + drm_device_t *dev = priv->head->dev; drm_map_t request; - int found_maps = 0; + drm_local_map_t *map = NULL; + struct list_head *list; + int ret; - if (copy_from_user(&request, (drm_map_t __user *)arg, - sizeof(request))) { + if (copy_from_user(&request, (drm_map_t __user *)arg, sizeof(request))) { return -EFAULT; } down(&dev->struct_sem); - list = &dev->maplist->head; list_for_each(list, &dev->maplist->head) { - r_list = list_entry(list, drm_map_list_t, head); + drm_map_list_t *r_list = list_entry(list, drm_map_list_t, head); - if(r_list->map && - r_list->map->offset == (unsigned long) request.handle && - r_list->map->flags & _DRM_REMOVABLE) break; + if (r_list->map && + r_list->user_token == (unsigned long) request.handle && + r_list->map->flags & _DRM_REMOVABLE) { + map = r_list->map; + break; + } } /* List has wrapped around to the head pointer, or its empty we didn't * find anything. */ - if(list == (&dev->maplist->head)) { + if (list == (&dev->maplist->head)) { up(&dev->struct_sem); return -EINVAL; } - map = r_list->map; - list_del(list); - drm_free(list, sizeof(*list), DRM_MEM_MAPS); - for (pt = dev->vmalist, prev = NULL; pt; prev = pt, pt = pt->next) { - if (pt->vma->vm_private_data == map) found_maps++; - } + if (!map) + return -EINVAL; - if(!found_maps) { - switch (map->type) { - case _DRM_REGISTERS: - case _DRM_FRAME_BUFFER: - if (drm_core_has_MTRR(dev)) { - if (map->mtrr >= 0) { - int retcode; - retcode = mtrr_del(map->mtrr, - map->offset, - map->size); - DRM_DEBUG("mtrr_del = %d\n", retcode); - } - } - drm_ioremapfree(map->handle, map->size, dev); - break; - case _DRM_SHM: - vfree(map->handle); - break; - case _DRM_AGP: - case _DRM_SCATTER_GATHER: - break; - } - drm_free(map, sizeof(*map), DRM_MEM_MAPS); + /* Register and framebuffer maps are permanent */ + if ((map->type == _DRM_REGISTERS) || (map->type == _DRM_FRAME_BUFFER)) { + up(&dev->struct_sem); + return 0; } + + ret = drm_rmmap_locked(dev, map); + up(&dev->struct_sem); - return 0; + + return ret; } /** * Cleanup after an error on one of the addbufs() functions. * + * \param dev DRM device. * \param entry buffer entry where the error occurred. * * Frees any pages and buffers associated with the given entry. @@ -344,25 +501,19 @@ static void drm_cleanup_buf_error(drm_device_t *dev, drm_buf_entry_t *entry) #if __OS_HAS_AGP /** - * Add AGP buffers for DMA transfers (ioctl). + * Add AGP buffers for DMA transfers. * - * \param inode device inode. - * \param filp file pointer. - * \param cmd command. - * \param arg pointer to a drm_buf_desc_t request. + * \param dev drm_device_t to which the buffers are to be added. + * \param request pointer to a drm_buf_desc_t describing the request. * \return zero on success or a negative number on failure. * * After some sanity checks creates a drm_buf structure for each buffer and * reallocates the buffer list of the same size order to accommodate the new * buffers. */ -static int drm_addbufs_agp( struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg ) +int drm_addbufs_agp(drm_device_t *dev, drm_buf_desc_t *request) { - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->head->dev; drm_device_dma_t *dma = dev->dma; - drm_buf_desc_t request; drm_buf_entry_t *entry; drm_buf_t *buf; unsigned long offset; @@ -376,25 +527,20 @@ static int drm_addbufs_agp( struct inode *inode, struct file *filp, int byte_count; int i; drm_buf_t **temp_buflist; - drm_buf_desc_t __user *argp = (void __user *)arg; if ( !dma ) return -EINVAL; - if ( copy_from_user( &request, argp, - sizeof(request) ) ) - return -EFAULT; - - count = request.count; - order = drm_order( request.size ); + count = request->count; + order = drm_order(request->size); size = 1 << order; - alignment = (request.flags & _DRM_PAGE_ALIGN) + alignment = (request->flags & _DRM_PAGE_ALIGN) ? PAGE_ALIGN(size) : size; page_order = order - PAGE_SHIFT > 0 ? order - PAGE_SHIFT : 0; total = PAGE_SIZE << page_order; byte_count = 0; - agp_offset = dev->agp->base + request.agp_start; + agp_offset = dev->agp->base + request->agp_start; DRM_DEBUG( "count: %d\n", count ); DRM_DEBUG( "order: %d\n", order ); @@ -508,26 +654,20 @@ static int drm_addbufs_agp( struct inode *inode, struct file *filp, up( &dev->struct_sem ); - request.count = entry->buf_count; - request.size = size; - - if ( copy_to_user( argp, &request, sizeof(request) ) ) - return -EFAULT; + request->count = entry->buf_count; + request->size = size; dma->flags = _DRM_DMA_USE_AGP; atomic_dec( &dev->buf_alloc ); return 0; } +EXPORT_SYMBOL(drm_addbufs_agp); #endif /* __OS_HAS_AGP */ -static int drm_addbufs_pci( struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg ) +int drm_addbufs_pci(drm_device_t *dev, drm_buf_desc_t *request) { - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->head->dev; drm_device_dma_t *dma = dev->dma; - drm_buf_desc_t request; int count; int order; int size; @@ -543,26 +683,22 @@ static int drm_addbufs_pci( struct inode *inode, struct file *filp, int page_count; unsigned long *temp_pagelist; drm_buf_t **temp_buflist; - drm_buf_desc_t __user *argp = (void __user *)arg; if (!drm_core_check_feature(dev, DRIVER_PCI_DMA)) return -EINVAL; if ( !dma ) return -EINVAL; - if ( copy_from_user( &request, argp, sizeof(request) ) ) - return -EFAULT; - - count = request.count; - order = drm_order( request.size ); + count = request->count; + order = drm_order(request->size); size = 1 << order; DRM_DEBUG( "count=%d, size=%d (%d), order=%d, queue_count=%d\n", - request.count, request.size, size, + request->count, request->size, size, order, dev->queue_count ); if ( order < DRM_MIN_ORDER || order > DRM_MAX_ORDER ) return -EINVAL; if ( dev->queue_count ) return -EBUSY; /* Not while in use */ - alignment = (request.flags & _DRM_PAGE_ALIGN) + alignment = (request->flags & _DRM_PAGE_ALIGN) ? PAGE_ALIGN(size) : size; page_order = order - PAGE_SHIFT > 0 ? order - PAGE_SHIFT : 0; total = PAGE_SIZE << page_order; @@ -740,25 +876,18 @@ static int drm_addbufs_pci( struct inode *inode, struct file *filp, up( &dev->struct_sem ); - request.count = entry->buf_count; - request.size = size; - - if ( copy_to_user( argp, &request, sizeof(request) ) ) - return -EFAULT; + request->count = entry->buf_count; + request->size = size; atomic_dec( &dev->buf_alloc ); return 0; } +EXPORT_SYMBOL(drm_addbufs_pci); -static int drm_addbufs_sg( struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg ) +static int drm_addbufs_sg(drm_device_t *dev, drm_buf_desc_t *request) { - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->head->dev; drm_device_dma_t *dma = dev->dma; - drm_buf_desc_t __user *argp = (void __user *)arg; - drm_buf_desc_t request; drm_buf_entry_t *entry; drm_buf_t *buf; unsigned long offset; @@ -777,20 +906,17 @@ static int drm_addbufs_sg( struct inode *inode, struct file *filp, if ( !dma ) return -EINVAL; - if ( copy_from_user( &request, argp, sizeof(request) ) ) - return -EFAULT; - - count = request.count; - order = drm_order( request.size ); + count = request->count; + order = drm_order(request->size); size = 1 << order; - alignment = (request.flags & _DRM_PAGE_ALIGN) + alignment = (request->flags & _DRM_PAGE_ALIGN) ? PAGE_ALIGN(size) : size; page_order = order - PAGE_SHIFT > 0 ? order - PAGE_SHIFT : 0; total = PAGE_SIZE << page_order; byte_count = 0; - agp_offset = request.agp_start; + agp_offset = request->agp_start; DRM_DEBUG( "count: %d\n", count ); DRM_DEBUG( "order: %d\n", order ); @@ -848,7 +974,8 @@ static int drm_addbufs_sg( struct inode *inode, struct file *filp, buf->offset = (dma->byte_count + offset); buf->bus_address = agp_offset + offset; - buf->address = (void *)(agp_offset + offset + dev->sg->handle); + buf->address = (void *)(agp_offset + offset + + (unsigned long)dev->sg->virtual); buf->next = NULL; buf->waiting = 0; buf->pending = 0; @@ -905,11 +1032,8 @@ static int drm_addbufs_sg( struct inode *inode, struct file *filp, up( &dev->struct_sem ); - request.count = entry->buf_count; - request.size = size; - - if ( copy_to_user( argp, &request, sizeof(request) ) ) - return -EFAULT; + request->count = entry->buf_count; + request->size = size; dma->flags = _DRM_DMA_USE_SG; @@ -917,6 +1041,161 @@ static int drm_addbufs_sg( struct inode *inode, struct file *filp, return 0; } +int drm_addbufs_fb(drm_device_t *dev, drm_buf_desc_t *request) +{ + drm_device_dma_t *dma = dev->dma; + drm_buf_entry_t *entry; + drm_buf_t *buf; + unsigned long offset; + unsigned long agp_offset; + int count; + int order; + int size; + int alignment; + int page_order; + int total; + int byte_count; + int i; + drm_buf_t **temp_buflist; + + if (!drm_core_check_feature(dev, DRIVER_FB_DMA)) + return -EINVAL; + + if (!dma) + return -EINVAL; + + count = request->count; + order = drm_order(request->size); + size = 1 << order; + + alignment = (request->flags & _DRM_PAGE_ALIGN) + ? PAGE_ALIGN(size) : size; + page_order = order - PAGE_SHIFT > 0 ? order - PAGE_SHIFT : 0; + total = PAGE_SIZE << page_order; + + byte_count = 0; + agp_offset = request->agp_start; + + DRM_DEBUG("count: %d\n", count); + DRM_DEBUG("order: %d\n", order); + DRM_DEBUG("size: %d\n", size); + DRM_DEBUG("agp_offset: %lu\n", agp_offset); + DRM_DEBUG("alignment: %d\n", alignment); + DRM_DEBUG("page_order: %d\n", page_order); + DRM_DEBUG("total: %d\n", total); + + if (order < DRM_MIN_ORDER || order > DRM_MAX_ORDER) + return -EINVAL; + if (dev->queue_count) + return -EBUSY; /* Not while in use */ + + spin_lock(&dev->count_lock); + if (dev->buf_use) { + spin_unlock(&dev->count_lock); + return -EBUSY; + } + atomic_inc(&dev->buf_alloc); + spin_unlock(&dev->count_lock); + + down(&dev->struct_sem); + entry = &dma->bufs[order]; + if (entry->buf_count) { + up(&dev->struct_sem); + atomic_dec(&dev->buf_alloc); + return -ENOMEM; /* May only call once for each order */ + } + + if (count < 0 || count > 4096) { + up(&dev->struct_sem); + atomic_dec(&dev->buf_alloc); + return -EINVAL; + } + + entry->buflist = drm_alloc(count * sizeof(*entry->buflist), + DRM_MEM_BUFS); + if (!entry->buflist) { + up(&dev->struct_sem); + atomic_dec(&dev->buf_alloc); + return -ENOMEM; + } + memset(entry->buflist, 0, count * sizeof(*entry->buflist)); + + entry->buf_size = size; + entry->page_order = page_order; + + offset = 0; + + while (entry->buf_count < count) { + buf = &entry->buflist[entry->buf_count]; + buf->idx = dma->buf_count + entry->buf_count; + buf->total = alignment; + buf->order = order; + buf->used = 0; + + buf->offset = (dma->byte_count + offset); + buf->bus_address = agp_offset + offset; + buf->address = (void *)(agp_offset + offset); + buf->next = NULL; + buf->waiting = 0; + buf->pending = 0; + init_waitqueue_head(&buf->dma_wait); + buf->filp = NULL; + + buf->dev_priv_size = dev->driver->dev_priv_size; + buf->dev_private = drm_alloc(buf->dev_priv_size, DRM_MEM_BUFS); + if (!buf->dev_private) { + /* Set count correctly so we free the proper amount. */ + entry->buf_count = count; + drm_cleanup_buf_error(dev, entry); + up(&dev->struct_sem); + atomic_dec(&dev->buf_alloc); + return -ENOMEM; + } + memset(buf->dev_private, 0, buf->dev_priv_size); + + DRM_DEBUG("buffer %d @ %p\n", entry->buf_count, buf->address); + + offset += alignment; + entry->buf_count++; + byte_count += PAGE_SIZE << page_order; + } + + DRM_DEBUG("byte_count: %d\n", byte_count); + + temp_buflist = drm_realloc(dma->buflist, + dma->buf_count * sizeof(*dma->buflist), + (dma->buf_count + entry->buf_count) + * sizeof(*dma->buflist), DRM_MEM_BUFS); + if (!temp_buflist) { + /* Free the entry because it isn't valid */ + drm_cleanup_buf_error(dev, entry); + up(&dev->struct_sem); + atomic_dec(&dev->buf_alloc); + return -ENOMEM; + } + dma->buflist = temp_buflist; + + for (i = 0; i < entry->buf_count; i++) { + dma->buflist[i + dma->buf_count] = &entry->buflist[i]; + } + + dma->buf_count += entry->buf_count; + dma->byte_count += byte_count; + + DRM_DEBUG("dma->buf_count : %d\n", dma->buf_count); + DRM_DEBUG("entry->buf_count : %d\n", entry->buf_count); + + up(&dev->struct_sem); + + request->count = entry->buf_count; + request->size = size; + + dma->flags = _DRM_DMA_USE_FB; + + atomic_dec(&dev->buf_alloc); + return 0; +} + /** * Add buffers for DMA transfers (ioctl). * @@ -937,6 +1216,7 @@ int drm_addbufs( struct inode *inode, struct file *filp, drm_buf_desc_t request; drm_file_t *priv = filp->private_data; drm_device_t *dev = priv->head->dev; + int ret; if (!drm_core_check_feature(dev, DRIVER_HAVE_DMA)) return -EINVAL; @@ -947,13 +1227,23 @@ int drm_addbufs( struct inode *inode, struct file *filp, #if __OS_HAS_AGP if ( request.flags & _DRM_AGP_BUFFER ) - return drm_addbufs_agp( inode, filp, cmd, arg ); + ret=drm_addbufs_agp(dev, &request); else #endif if ( request.flags & _DRM_SG_BUFFER ) - return drm_addbufs_sg( inode, filp, cmd, arg ); + ret=drm_addbufs_sg(dev, &request); + else if ( request.flags & _DRM_FB_BUFFER) + ret=drm_addbufs_fb(dev, &request); else - return drm_addbufs_pci( inode, filp, cmd, arg ); + ret=drm_addbufs_pci(dev, &request); + + if (ret==0) { + if (copy_to_user((void __user *)arg, &request, + sizeof(request))) { + ret = -EFAULT; + } + } + return ret; } @@ -1196,43 +1486,31 @@ int drm_mapbufs( struct inode *inode, struct file *filp, return -EFAULT; if ( request.count >= dma->buf_count ) { - if ((drm_core_has_AGP(dev) && (dma->flags & _DRM_DMA_USE_AGP)) || - (drm_core_check_feature(dev, DRIVER_SG) && (dma->flags & _DRM_DMA_USE_SG)) ) { + if ((drm_core_has_AGP(dev) && (dma->flags & _DRM_DMA_USE_AGP)) + || (drm_core_check_feature(dev, DRIVER_SG) + && (dma->flags & _DRM_DMA_USE_SG)) + || (drm_core_check_feature(dev, DRIVER_FB_DMA) + && (dma->flags & _DRM_DMA_USE_FB))) { drm_map_t *map = dev->agp_buffer_map; + unsigned long token = dev->agp_buffer_token; if ( !map ) { retcode = -EINVAL; goto done; } -#if LINUX_VERSION_CODE <= 0x020402 - down( ¤t->mm->mmap_sem ); -#else down_write( ¤t->mm->mmap_sem ); -#endif virtual = do_mmap( filp, 0, map->size, PROT_READ | PROT_WRITE, MAP_SHARED, - (unsigned long)map->offset ); -#if LINUX_VERSION_CODE <= 0x020402 - up( ¤t->mm->mmap_sem ); -#else + token ); up_write( ¤t->mm->mmap_sem ); -#endif } else { -#if LINUX_VERSION_CODE <= 0x020402 - down( ¤t->mm->mmap_sem ); -#else down_write( ¤t->mm->mmap_sem ); -#endif virtual = do_mmap( filp, 0, dma->byte_count, PROT_READ | PROT_WRITE, MAP_SHARED, 0 ); -#if LINUX_VERSION_CODE <= 0x020402 - up( ¤t->mm->mmap_sem ); -#else up_write( ¤t->mm->mmap_sem ); -#endif } if ( virtual > -1024UL ) { /* Real error */ @@ -1279,3 +1557,26 @@ int drm_mapbufs( struct inode *inode, struct file *filp, return retcode; } +/** + * Compute size order. Returns the exponent of the smaller power of two which + * is greater or equal to given number. + * + * \param size size. + * \return order. + * + * \todo Can be made faster. + */ +int drm_order( unsigned long size ) +{ + int order; + unsigned long tmp; + + for (order = 0, tmp = size >> 1; tmp; tmp >>= 1, order++) + ; + + if (size & (size - 1)) + ++order; + + return order; +} +EXPORT_SYMBOL(drm_order); diff --git a/drivers/char/drm/drm_context.c b/drivers/char/drm/drm_context.c index a7cfabd1ca2e..f515567e5b6f 100644 --- a/drivers/char/drm/drm_context.c +++ b/drivers/char/drm/drm_context.c @@ -212,6 +212,7 @@ int drm_getsareactx(struct inode *inode, struct file *filp, drm_ctx_priv_map_t __user *argp = (void __user *)arg; drm_ctx_priv_map_t request; drm_map_t *map; + drm_map_list_t *_entry; if (copy_from_user(&request, argp, sizeof(request))) return -EFAULT; @@ -225,7 +226,17 @@ int drm_getsareactx(struct inode *inode, struct file *filp, map = dev->context_sareas[request.ctx_id]; up(&dev->struct_sem); - request.handle = (void *) map->offset; + request.handle = 0; + list_for_each_entry(_entry, &dev->maplist->head,head) { + if (_entry->map == map) { + request.handle = (void *)(unsigned long)_entry->user_token; + break; + } + } + if (request.handle == 0) + return -EINVAL; + + if (copy_to_user(argp, &request, sizeof(request))) return -EFAULT; return 0; @@ -262,7 +273,7 @@ int drm_setsareactx(struct inode *inode, struct file *filp, list_for_each(list, &dev->maplist->head) { r_list = list_entry(list, drm_map_list_t, head); if (r_list->map - && r_list->map->offset == (unsigned long) request.handle) + && r_list->user_token == (unsigned long) request.handle) goto found; } bad: @@ -369,7 +380,7 @@ int drm_resctx( struct inode *inode, struct file *filp, for ( i = 0 ; i < DRM_RESERVED_CONTEXTS ; i++ ) { ctx.handle = i; if ( copy_to_user( &res.contexts[i], - &i, sizeof(i) ) ) + &ctx, sizeof(ctx) ) ) return -EFAULT; } } diff --git a/drivers/char/drm/drm_drv.c b/drivers/char/drm/drm_drv.c index 3333c250c4d9..6ba48f346fcf 100644 --- a/drivers/char/drm/drm_drv.c +++ b/drivers/char/drm/drm_drv.c @@ -70,8 +70,8 @@ static drm_ioctl_desc_t drm_ioctls[] = { [DRM_IOCTL_NR(DRM_IOCTL_UNBLOCK)] = { drm_noop, 1, 1 }, [DRM_IOCTL_NR(DRM_IOCTL_AUTH_MAGIC)] = { drm_authmagic, 1, 1 }, - [DRM_IOCTL_NR(DRM_IOCTL_ADD_MAP)] = { drm_addmap, 1, 1 }, - [DRM_IOCTL_NR(DRM_IOCTL_RM_MAP)] = { drm_rmmap, 1, 0 }, + [DRM_IOCTL_NR(DRM_IOCTL_ADD_MAP)] = { drm_addmap_ioctl,1, 1 }, + [DRM_IOCTL_NR(DRM_IOCTL_RM_MAP)] = { drm_rmmap_ioctl, 1, 0 }, [DRM_IOCTL_NR(DRM_IOCTL_SET_SAREA_CTX)] = { drm_setsareactx, 1, 1 }, [DRM_IOCTL_NR(DRM_IOCTL_GET_SAREA_CTX)] = { drm_getsareactx, 1, 0 }, @@ -102,10 +102,10 @@ static drm_ioctl_desc_t drm_ioctls[] = { [DRM_IOCTL_NR(DRM_IOCTL_CONTROL)] = { drm_control, 1, 1 }, #if __OS_HAS_AGP - [DRM_IOCTL_NR(DRM_IOCTL_AGP_ACQUIRE)] = { drm_agp_acquire, 1, 1 }, - [DRM_IOCTL_NR(DRM_IOCTL_AGP_RELEASE)] = { drm_agp_release, 1, 1 }, - [DRM_IOCTL_NR(DRM_IOCTL_AGP_ENABLE)] = { drm_agp_enable, 1, 1 }, - [DRM_IOCTL_NR(DRM_IOCTL_AGP_INFO)] = { drm_agp_info, 1, 0 }, + [DRM_IOCTL_NR(DRM_IOCTL_AGP_ACQUIRE)] = { drm_agp_acquire_ioctl, 1, 1 }, + [DRM_IOCTL_NR(DRM_IOCTL_AGP_RELEASE)] = { drm_agp_release_ioctl, 1, 1 }, + [DRM_IOCTL_NR(DRM_IOCTL_AGP_ENABLE)] = { drm_agp_enable_ioctl, 1, 1 }, + [DRM_IOCTL_NR(DRM_IOCTL_AGP_INFO)] = { drm_agp_info_ioctl, 1, 0 }, [DRM_IOCTL_NR(DRM_IOCTL_AGP_ALLOC)] = { drm_agp_alloc, 1, 1 }, [DRM_IOCTL_NR(DRM_IOCTL_AGP_FREE)] = { drm_agp_free, 1, 1 }, [DRM_IOCTL_NR(DRM_IOCTL_AGP_BIND)] = { drm_agp_bind, 1, 1 }, @@ -127,14 +127,12 @@ static drm_ioctl_desc_t drm_ioctls[] = { * * Frees every resource in \p dev. * - * \sa drm_device and setup(). + * \sa drm_device */ int drm_takedown( drm_device_t *dev ) { drm_magic_entry_t *pt, *next; - drm_map_t *map; drm_map_list_t *r_list; - struct list_head *list, *list_next; drm_vma_entry_t *vma, *vma_next; int i; @@ -142,6 +140,7 @@ int drm_takedown( drm_device_t *dev ) if (dev->driver->pretakedown) dev->driver->pretakedown(dev); + DRM_DEBUG("driver pretakedown completed\n"); if (dev->unique) { drm_free(dev->unique, strlen(dev->unique) + 1, DRM_MEM_DRIVER); @@ -178,11 +177,16 @@ int drm_takedown( drm_device_t *dev ) } dev->agp->memory = NULL; - if ( dev->agp->acquired ) drm_agp_do_release(dev); + if (dev->agp->acquired) + drm_agp_release(dev); dev->agp->acquired = 0; dev->agp->enabled = 0; } + if (drm_core_check_feature(dev, DRIVER_SG) && dev->sg) { + drm_sg_cleanup(dev->sg); + dev->sg = NULL; + } /* Clear vma list (only built for debugging) */ if ( dev->vmalist ) { @@ -194,48 +198,11 @@ int drm_takedown( drm_device_t *dev ) } if( dev->maplist ) { - list_for_each_safe( list, list_next, &dev->maplist->head ) { - r_list = (drm_map_list_t *)list; - - if ( ( map = r_list->map ) ) { - switch ( map->type ) { - case _DRM_REGISTERS: - case _DRM_FRAME_BUFFER: - if (drm_core_has_MTRR(dev)) { - if ( map->mtrr >= 0 ) { - int retcode; - retcode = mtrr_del( map->mtrr, - map->offset, - map->size ); - DRM_DEBUG( "mtrr_del=%d\n", retcode ); - } - } - drm_ioremapfree( map->handle, map->size, dev ); - break; - case _DRM_SHM: - vfree(map->handle); - break; - - case _DRM_AGP: - /* Do nothing here, because this is all - * handled in the AGP/GART driver. - */ - break; - case _DRM_SCATTER_GATHER: - /* Handle it */ - if (drm_core_check_feature(dev, DRIVER_SG) && dev->sg) { - drm_sg_cleanup(dev->sg); - dev->sg = NULL; - } - break; - } - drm_free(map, sizeof(*map), DRM_MEM_MAPS); - } - list_del( list ); - drm_free(r_list, sizeof(*r_list), DRM_MEM_MAPS); - } - drm_free(dev->maplist, sizeof(*dev->maplist), DRM_MEM_MAPS); - dev->maplist = NULL; + while (!list_empty(&dev->maplist->head)) { + struct list_head *list = dev->maplist->head.next; + r_list = list_entry(list, drm_map_list_t, head); + drm_rmmap_locked(dev, r_list->map); + } } if (drm_core_check_feature(dev, DRIVER_DMA_QUEUE) && dev->queuelist ) { @@ -264,6 +231,7 @@ int drm_takedown( drm_device_t *dev ) } up( &dev->struct_sem ); + DRM_DEBUG("takedown completed\n"); return 0; } @@ -312,7 +280,7 @@ EXPORT_SYMBOL(drm_init); * * Cleans up all DRM device, calling takedown(). * - * \sa drm_init(). + * \sa drm_init */ static void drm_cleanup( drm_device_t *dev ) { @@ -325,6 +293,11 @@ static void drm_cleanup( drm_device_t *dev ) drm_takedown( dev ); + if (dev->maplist) { + drm_free(dev->maplist, sizeof(*dev->maplist), DRM_MEM_MAPS); + dev->maplist = NULL; + } + drm_ctxbitmap_cleanup( dev ); if (drm_core_has_MTRR(dev) && drm_core_has_AGP(dev) && diff --git a/drivers/char/drm/drm_fops.c b/drivers/char/drm/drm_fops.c index 10e64fde8d78..a1f4e9cd64ed 100644 --- a/drivers/char/drm/drm_fops.c +++ b/drivers/char/drm/drm_fops.c @@ -71,12 +71,6 @@ static int drm_setup( drm_device_t *dev ) dev->magiclist[i].tail = NULL; } - dev->maplist = drm_alloc(sizeof(*dev->maplist), - DRM_MEM_MAPS); - if(dev->maplist == NULL) return -ENOMEM; - memset(dev->maplist, 0, sizeof(*dev->maplist)); - INIT_LIST_HEAD(&dev->maplist->head); - dev->ctxlist = drm_alloc(sizeof(*dev->ctxlist), DRM_MEM_CTXLIST); if(dev->ctxlist == NULL) return -ENOMEM; diff --git a/drivers/char/drm/drm_ioctl.c b/drivers/char/drm/drm_ioctl.c index 39afda0ccabe..d2ed3ba5aca9 100644 --- a/drivers/char/drm/drm_ioctl.c +++ b/drivers/char/drm/drm_ioctl.c @@ -208,7 +208,7 @@ int drm_getmap( struct inode *inode, struct file *filp, map.size = r_list->map->size; map.type = r_list->map->type; map.flags = r_list->map->flags; - map.handle = r_list->map->handle; + map.handle = (void *)(unsigned long) r_list->user_token; map.mtrr = r_list->map->mtrr; up(&dev->struct_sem); diff --git a/drivers/char/drm/drm_memory.c b/drivers/char/drm/drm_memory.c index ace3d42f4407..ff483fb418aa 100644 --- a/drivers/char/drm/drm_memory.c +++ b/drivers/char/drm/drm_memory.c @@ -142,27 +142,31 @@ void drm_free_pages(unsigned long address, int order, int area) #if __OS_HAS_AGP /** Wrapper around agp_allocate_memory() */ -DRM_AGP_MEM *drm_alloc_agp(struct agp_bridge_data *bridge, int pages, u32 type) +DRM_AGP_MEM *drm_alloc_agp(drm_device_t *dev, int pages, u32 type) { - return drm_agp_allocate_memory(bridge, pages, type); + return drm_agp_allocate_memory(dev->agp->bridge, pages, type); } +EXPORT_SYMBOL(drm_alloc_agp); /** Wrapper around agp_free_memory() */ int drm_free_agp(DRM_AGP_MEM *handle, int pages) { return drm_agp_free_memory(handle) ? 0 : -EINVAL; } +EXPORT_SYMBOL(drm_free_agp); /** Wrapper around agp_bind_memory() */ int drm_bind_agp(DRM_AGP_MEM *handle, unsigned int start) { return drm_agp_bind_memory(handle, start); } +EXPORT_SYMBOL(drm_bind_agp); /** Wrapper around agp_unbind_memory() */ int drm_unbind_agp(DRM_AGP_MEM *handle) { return drm_agp_unbind_memory(handle); } +EXPORT_SYMBOL(drm_unbind_agp); #endif /* agp */ #endif /* debug_memory */ diff --git a/drivers/char/drm/drm_pci.c b/drivers/char/drm/drm_pci.c index 192e8762571c..09ed712c1a7f 100644 --- a/drivers/char/drm/drm_pci.c +++ b/drivers/char/drm/drm_pci.c @@ -46,11 +46,11 @@ /** * \brief Allocate a PCI consistent memory block, for DMA. */ -void *drm_pci_alloc(drm_device_t * dev, size_t size, size_t align, - dma_addr_t maxaddr, dma_addr_t * busaddr) +drm_dma_handle_t *drm_pci_alloc(drm_device_t * dev, size_t size, size_t align, + dma_addr_t maxaddr) { - void *address; -#if DRM_DEBUG_MEMORY + drm_dma_handle_t *dmah; +#ifdef DRM_DEBUG_MEMORY int area = DRM_MEM_DMA; spin_lock(&drm_mem_lock); @@ -74,13 +74,19 @@ void *drm_pci_alloc(drm_device_t * dev, size_t size, size_t align, return NULL; } - address = pci_alloc_consistent(dev->pdev, size, busaddr); + dmah = kmalloc(sizeof(drm_dma_handle_t), GFP_KERNEL); + if (!dmah) + return NULL; + + dmah->size = size; + dmah->vaddr = pci_alloc_consistent(dev->pdev, size, &dmah->busaddr); -#if DRM_DEBUG_MEMORY - if (address == NULL) { +#ifdef DRM_DEBUG_MEMORY + if (dmah->vaddr == NULL) { spin_lock(&drm_mem_lock); ++drm_mem_stats[area].fail_count; spin_unlock(&drm_mem_lock); + kfree(dmah); return NULL; } @@ -90,37 +96,42 @@ void *drm_pci_alloc(drm_device_t * dev, size_t size, size_t align, drm_ram_used += size; spin_unlock(&drm_mem_lock); #else - if (address == NULL) + if (dmah->vaddr == NULL) { + kfree(dmah); return NULL; + } #endif - memset(address, 0, size); + memset(dmah->vaddr, 0, size); - return address; + return dmah; } EXPORT_SYMBOL(drm_pci_alloc); /** - * \brief Free a PCI consistent memory block. + * \brief Free a PCI consistent memory block with freeing its descriptor. + * + * This function is for internal use in the Linux-specific DRM core code. */ void -drm_pci_free(drm_device_t * dev, size_t size, void *vaddr, dma_addr_t busaddr) +__drm_pci_free(drm_device_t * dev, drm_dma_handle_t *dmah) { -#if DRM_DEBUG_MEMORY +#ifdef DRM_DEBUG_MEMORY int area = DRM_MEM_DMA; int alloc_count; int free_count; #endif - if (!vaddr) { -#if DRM_DEBUG_MEMORY + if (!dmah->vaddr) { +#ifdef DRM_DEBUG_MEMORY DRM_MEM_ERROR(area, "Attempt to free address 0\n"); #endif } else { - pci_free_consistent(dev->pdev, size, vaddr, busaddr); + pci_free_consistent(dev->pdev, dmah->size, dmah->vaddr, + dmah->busaddr); } -#if DRM_DEBUG_MEMORY +#ifdef DRM_DEBUG_MEMORY spin_lock(&drm_mem_lock); free_count = ++drm_mem_stats[area].free_count; alloc_count = drm_mem_stats[area].succeed_count; @@ -135,6 +146,16 @@ drm_pci_free(drm_device_t * dev, size_t size, void *vaddr, dma_addr_t busaddr) #endif } + +/** + * \brief Free a PCI consistent memory block + */ +void +drm_pci_free(drm_device_t *dev, drm_dma_handle_t *dmah) +{ + __drm_pci_free(dev, dmah); + kfree(dmah); +} EXPORT_SYMBOL(drm_pci_free); /*@}*/ diff --git a/drivers/char/drm/drm_pciids.h b/drivers/char/drm/drm_pciids.h index 70ca4fa55c9d..58b1747cd440 100644 --- a/drivers/char/drm/drm_pciids.h +++ b/drivers/char/drm/drm_pciids.h @@ -25,6 +25,8 @@ {0x1002, 0x4965, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250}, \ {0x1002, 0x4966, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250}, \ {0x1002, 0x4967, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250}, \ + {0x1002, 0x4A49, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420}, \ + {0x1002, 0x4A4B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420}, \ {0x1002, 0x4C57, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV200|CHIP_IS_MOBILITY}, \ {0x1002, 0x4C58, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV200|CHIP_IS_MOBILITY}, \ {0x1002, 0x4C59, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100|CHIP_IS_MOBILITY}, \ @@ -33,7 +35,17 @@ {0x1002, 0x4C65, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250|CHIP_IS_MOBILITY}, \ {0x1002, 0x4C66, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250|CHIP_IS_MOBILITY}, \ {0x1002, 0x4C67, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R250|CHIP_IS_MOBILITY}, \ + {0x1002, 0x4E44, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \ + {0x1002, 0x4E45, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \ + {0x1002, 0x4E46, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \ + {0x1002, 0x4E47, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \ + {0x1002, 0x4E48, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \ + {0x1002, 0x4E49, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \ + {0x1002, 0x4E4A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \ + {0x1002, 0x4E4B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \ {0x1002, 0x4E50, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350|CHIP_IS_MOBILITY}, \ + {0x1002, 0x4E51, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350|CHIP_IS_MOBILITY}, \ + {0x1002, 0x4E54, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350|CHIP_IS_MOBILITY}, \ {0x1002, 0x5144, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R100|CHIP_SINGLE_CRTC}, \ {0x1002, 0x5145, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R100|CHIP_SINGLE_CRTC}, \ {0x1002, 0x5146, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R100|CHIP_SINGLE_CRTC}, \ @@ -56,6 +68,7 @@ {0x1002, 0x516A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \ {0x1002, 0x516B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \ {0x1002, 0x516C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \ + {0x1002, 0x5460, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \ {0x1002, 0x5834, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|CHIP_IS_IGP}, \ {0x1002, 0x5835, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|CHIP_IS_IGP|CHIP_IS_MOBILITY}, \ {0x1002, 0x5836, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|CHIP_IS_IGP}, \ @@ -116,9 +129,10 @@ {0, 0, 0} #define mga_PCI_IDS \ - {0x102b, 0x0521, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x102b, 0x0525, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x102b, 0x2527, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ + {0x102b, 0x0520, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MGA_CARD_TYPE_G200}, \ + {0x102b, 0x0521, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MGA_CARD_TYPE_G200}, \ + {0x102b, 0x0525, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MGA_CARD_TYPE_G400}, \ + {0x102b, 0x2527, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MGA_CARD_TYPE_G550}, \ {0, 0, 0} #define mach64_PCI_IDS \ @@ -162,9 +176,10 @@ #define viadrv_PCI_IDS \ {0x1106, 0x3022, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ + {0x1106, 0x3118, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0x1106, 0x3122, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0x1106, 0x7205, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x1106, 0x7204, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ + {0x1106, 0x3108, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0, 0, 0} #define i810_PCI_IDS \ @@ -181,33 +196,30 @@ {0x8086, 0x2572, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0, 0, 0} -#define gamma_PCI_IDS \ - {0x3d3d, 0x0008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0, 0, 0} - #define savage_PCI_IDS \ - {0x5333, 0x8a22, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8a23, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8c10, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8c11, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8c12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8c13, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8c20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8c21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8c22, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8c24, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8c26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8c2a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8c2b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8c2c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8c2d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8c2e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8c2f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8a25, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8a26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8d01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8d02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x5333, 0x8d04, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ + {0x5333, 0x8a20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE3D}, \ + {0x5333, 0x8a21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE3D}, \ + {0x5333, 0x8a22, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE4}, \ + {0x5333, 0x8a23, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE4}, \ + {0x5333, 0x8c10, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE_MX}, \ + {0x5333, 0x8c11, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE_MX}, \ + {0x5333, 0x8c12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE_MX}, \ + {0x5333, 0x8c13, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE_MX}, \ + {0x5333, 0x8c22, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \ + {0x5333, 0x8c24, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \ + {0x5333, 0x8c26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \ + {0x5333, 0x8c2a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \ + {0x5333, 0x8c2b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \ + {0x5333, 0x8c2c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \ + {0x5333, 0x8c2d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \ + {0x5333, 0x8c2e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \ + {0x5333, 0x8c2f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \ + {0x5333, 0x8a25, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_PROSAVAGE}, \ + {0x5333, 0x8a26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_PROSAVAGE}, \ + {0x5333, 0x8d01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_TWISTER}, \ + {0x5333, 0x8d02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_TWISTER}, \ + {0x5333, 0x8d03, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_PROSAVAGEDDR}, \ + {0x5333, 0x8d04, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_PROSAVAGEDDR}, \ {0, 0, 0} #define ffb_PCI_IDS \ @@ -223,10 +235,3 @@ {0x8086, 0x2772, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0, 0, 0} -#define viadrv_PCI_IDS \ - {0x1106, 0x3022, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x1106, 0x3122, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x1106, 0x7205, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x1106, 0x7204, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0, 0, 0} - diff --git a/drivers/char/drm/drm_proc.c b/drivers/char/drm/drm_proc.c index 4774087d2e9e..32d2bb99462c 100644 --- a/drivers/char/drm/drm_proc.c +++ b/drivers/char/drm/drm_proc.c @@ -210,8 +210,8 @@ static int drm__vm_info(char *buf, char **start, off_t offset, int request, /* Hardcoded from _DRM_FRAME_BUFFER, _DRM_REGISTERS, _DRM_SHM, _DRM_AGP, and - _DRM_SCATTER_GATHER. */ - const char *types[] = { "FB", "REG", "SHM", "AGP", "SG" }; + _DRM_SCATTER_GATHER and _DRM_CONSISTENT */ + const char *types[] = { "FB", "REG", "SHM", "AGP", "SG", "PCI" }; const char *type; int i; @@ -229,16 +229,19 @@ static int drm__vm_info(char *buf, char **start, off_t offset, int request, if (dev->maplist != NULL) list_for_each(list, &dev->maplist->head) { r_list = list_entry(list, drm_map_list_t, head); map = r_list->map; - if(!map) continue; - if (map->type < 0 || map->type > 4) type = "??"; - else type = types[map->type]; - DRM_PROC_PRINT("%4d 0x%08lx 0x%08lx %4.4s 0x%02x 0x%08lx ", + if(!map) + continue; + if (map->type < 0 || map->type > 5) + type = "??"; + else + type = types[map->type]; + DRM_PROC_PRINT("%4d 0x%08lx 0x%08lx %4.4s 0x%02x 0x%08x ", i, map->offset, map->size, type, map->flags, - (unsigned long)map->handle); + r_list->user_token); if (map->mtrr < 0) { DRM_PROC_PRINT("none\n"); } else { diff --git a/drivers/char/drm/drm_scatter.c b/drivers/char/drm/drm_scatter.c index 54fddb6ea2d1..ed267d49bc6a 100644 --- a/drivers/char/drm/drm_scatter.c +++ b/drivers/char/drm/drm_scatter.c @@ -61,6 +61,12 @@ void drm_sg_cleanup( drm_sg_mem_t *entry ) DRM_MEM_SGLISTS ); } +#ifdef _LP64 +# define ScatterHandle(x) (unsigned int)((x >> 32) + (x & ((1L << 32) - 1))) +#else +# define ScatterHandle(x) (unsigned int)(x) +#endif + int drm_sg_alloc( struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg ) { @@ -133,12 +139,13 @@ int drm_sg_alloc( struct inode *inode, struct file *filp, */ memset( entry->virtual, 0, pages << PAGE_SHIFT ); - entry->handle = (unsigned long)entry->virtual; + entry->handle = ScatterHandle((unsigned long)entry->virtual); DRM_DEBUG( "sg alloc handle = %08lx\n", entry->handle ); DRM_DEBUG( "sg alloc virtual = %p\n", entry->virtual ); - for ( i = entry->handle, j = 0 ; j < pages ; i += PAGE_SIZE, j++ ) { + for (i = (unsigned long)entry->virtual, j = 0; j < pages; + i += PAGE_SIZE, j++) { entry->pagelist[j] = vmalloc_to_page((void *)i); if (!entry->pagelist[j]) goto failed; diff --git a/drivers/char/drm/drm_stub.c b/drivers/char/drm/drm_stub.c index 48829a1a086a..95a976c96eb8 100644 --- a/drivers/char/drm/drm_stub.c +++ b/drivers/char/drm/drm_stub.c @@ -75,6 +75,11 @@ static int drm_fill_in_dev(drm_device_t *dev, struct pci_dev *pdev, const struct dev->pci_func = PCI_FUNC(pdev->devfn); dev->irq = pdev->irq; + dev->maplist = drm_calloc(1, sizeof(*dev->maplist), DRM_MEM_MAPS); + if (dev->maplist == NULL) + return -ENOMEM; + INIT_LIST_HEAD(&dev->maplist->head); + /* the DRM has 6 basic counters */ dev->counters = 6; dev->types[0] = _DRM_STAT_LOCK; @@ -91,7 +96,8 @@ static int drm_fill_in_dev(drm_device_t *dev, struct pci_dev *pdev, const struct goto error_out_unreg; if (drm_core_has_AGP(dev)) { - dev->agp = drm_agp_init(dev); + if (drm_device_is_agp(dev)) + dev->agp = drm_agp_init(dev); if (drm_core_check_feature(dev, DRIVER_REQUIRE_AGP) && (dev->agp == NULL)) { DRM_ERROR( "Cannot initialize the agpgart module.\n" ); retcode = -EINVAL; diff --git a/drivers/char/drm/drm_vm.c b/drivers/char/drm/drm_vm.c index 621220f3f372..ced4215e2275 100644 --- a/drivers/char/drm/drm_vm.c +++ b/drivers/char/drm/drm_vm.c @@ -73,12 +73,13 @@ static __inline__ struct page *drm_do_vm_nopage(struct vm_area_struct *vma, r_list = list_entry(list, drm_map_list_t, head); map = r_list->map; if (!map) continue; - if (map->offset == VM_OFFSET(vma)) break; + if (r_list->user_token == VM_OFFSET(vma)) + break; } if (map && map->type == _DRM_AGP) { unsigned long offset = address - vma->vm_start; - unsigned long baddr = VM_OFFSET(vma) + offset; + unsigned long baddr = map->offset + offset; struct drm_agp_mem *agpmem; struct page *page; @@ -210,6 +211,8 @@ static void drm_vm_shm_close(struct vm_area_struct *vma) } if(!found_maps) { + drm_dma_handle_t dmah; + switch (map->type) { case _DRM_REGISTERS: case _DRM_FRAME_BUFFER: @@ -228,6 +231,12 @@ static void drm_vm_shm_close(struct vm_area_struct *vma) case _DRM_AGP: case _DRM_SCATTER_GATHER: break; + case _DRM_CONSISTENT: + dmah.vaddr = map->handle; + dmah.busaddr = map->offset; + dmah.size = map->size; + __drm_pci_free(dev, &dmah); + break; } drm_free(map, sizeof(*map), DRM_MEM_MAPS); } @@ -296,7 +305,7 @@ static __inline__ struct page *drm_do_vm_sg_nopage(struct vm_area_struct *vma, offset = address - vma->vm_start; - map_offset = map->offset - dev->sg->handle; + map_offset = map->offset - (unsigned long)dev->sg->virtual; page_offset = (offset >> PAGE_SHIFT) + (map_offset >> PAGE_SHIFT); page = entry->pagelist[page_offset]; get_page(page); @@ -305,8 +314,6 @@ static __inline__ struct page *drm_do_vm_sg_nopage(struct vm_area_struct *vma, } -#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,0) - static struct page *drm_vm_nopage(struct vm_area_struct *vma, unsigned long address, int *type) { @@ -335,35 +342,6 @@ static struct page *drm_vm_sg_nopage(struct vm_area_struct *vma, return drm_do_vm_sg_nopage(vma, address); } -#else /* LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,0) */ - -static struct page *drm_vm_nopage(struct vm_area_struct *vma, - unsigned long address, - int unused) { - return drm_do_vm_nopage(vma, address); -} - -static struct page *drm_vm_shm_nopage(struct vm_area_struct *vma, - unsigned long address, - int unused) { - return drm_do_vm_shm_nopage(vma, address); -} - -static struct page *drm_vm_dma_nopage(struct vm_area_struct *vma, - unsigned long address, - int unused) { - return drm_do_vm_dma_nopage(vma, address); -} - -static struct page *drm_vm_sg_nopage(struct vm_area_struct *vma, - unsigned long address, - int unused) { - return drm_do_vm_sg_nopage(vma, address); -} - -#endif - - /** AGP virtual memory operations */ static struct vm_operations_struct drm_vm_ops = { .nopage = drm_vm_nopage, @@ -487,11 +465,7 @@ static int drm_mmap_dma(struct file *filp, struct vm_area_struct *vma) vma->vm_ops = &drm_vm_dma_ops; -#if LINUX_VERSION_CODE <= 0x02040e /* KERNEL_VERSION(2,4,14) */ - vma->vm_flags |= VM_LOCKED | VM_SHM; /* Don't swap */ -#else vma->vm_flags |= VM_RESERVED; /* Don't swap */ -#endif vma->vm_file = filp; /* Needed for drm_vm_open() */ drm_vm_open(vma); @@ -560,13 +534,12 @@ int drm_mmap(struct file *filp, struct vm_area_struct *vma) for performance, even if the list was a bit longer. */ list_for_each(list, &dev->maplist->head) { - unsigned long off; r_list = list_entry(list, drm_map_list_t, head); map = r_list->map; if (!map) continue; - off = dev->driver->get_map_ofs(map); - if (off == VM_OFFSET(vma)) break; + if (r_list->user_token == VM_OFFSET(vma)) + break; } if (!map || ((map->flags&_DRM_RESTRICTED) && !capable(CAP_SYS_ADMIN))) @@ -605,17 +578,17 @@ int drm_mmap(struct file *filp, struct vm_area_struct *vma) /* fall through to _DRM_FRAME_BUFFER... */ case _DRM_FRAME_BUFFER: case _DRM_REGISTERS: - if (VM_OFFSET(vma) >= __pa(high_memory)) { #if defined(__i386__) || defined(__x86_64__) - if (boot_cpu_data.x86 > 3 && map->type != _DRM_AGP) { - pgprot_val(vma->vm_page_prot) |= _PAGE_PCD; - pgprot_val(vma->vm_page_prot) &= ~_PAGE_PWT; - } + if (boot_cpu_data.x86 > 3 && map->type != _DRM_AGP) { + pgprot_val(vma->vm_page_prot) |= _PAGE_PCD; + pgprot_val(vma->vm_page_prot) &= ~_PAGE_PWT; + } #elif defined(__powerpc__) - pgprot_val(vma->vm_page_prot) |= _PAGE_NO_CACHE | _PAGE_GUARDED; + pgprot_val(vma->vm_page_prot) |= _PAGE_NO_CACHE; + if (map->type == _DRM_REGISTERS) + pgprot_val(vma->vm_page_prot) |= _PAGE_GUARDED; #endif - vma->vm_flags |= VM_IO; /* not in core dump */ - } + vma->vm_flags |= VM_IO; /* not in core dump */ #if defined(__ia64__) if (efi_range_is_wc(vma->vm_start, vma->vm_end - vma->vm_start)) @@ -628,12 +601,12 @@ int drm_mmap(struct file *filp, struct vm_area_struct *vma) offset = dev->driver->get_reg_ofs(dev); #ifdef __sparc__ if (io_remap_pfn_range(DRM_RPR_ARG(vma) vma->vm_start, - (VM_OFFSET(vma) + offset) >> PAGE_SHIFT, + (map->offset + offset) >> PAGE_SHIFT, vma->vm_end - vma->vm_start, vma->vm_page_prot)) #else if (io_remap_pfn_range(vma, vma->vm_start, - (VM_OFFSET(vma) + offset) >> PAGE_SHIFT, + (map->offset + offset) >> PAGE_SHIFT, vma->vm_end - vma->vm_start, vma->vm_page_prot)) #endif @@ -641,37 +614,28 @@ int drm_mmap(struct file *filp, struct vm_area_struct *vma) DRM_DEBUG(" Type = %d; start = 0x%lx, end = 0x%lx," " offset = 0x%lx\n", map->type, - vma->vm_start, vma->vm_end, VM_OFFSET(vma) + offset); + vma->vm_start, vma->vm_end, map->offset + offset); vma->vm_ops = &drm_vm_ops; break; case _DRM_SHM: + case _DRM_CONSISTENT: + /* Consistent memory is really like shared memory. It's only + * allocate in a different way */ vma->vm_ops = &drm_vm_shm_ops; vma->vm_private_data = (void *)map; /* Don't let this area swap. Change when DRM_KERNEL advisory is supported. */ -#if LINUX_VERSION_CODE <= 0x02040e /* KERNEL_VERSION(2,4,14) */ - vma->vm_flags |= VM_LOCKED; -#else vma->vm_flags |= VM_RESERVED; -#endif break; case _DRM_SCATTER_GATHER: vma->vm_ops = &drm_vm_sg_ops; vma->vm_private_data = (void *)map; -#if LINUX_VERSION_CODE <= 0x02040e /* KERNEL_VERSION(2,4,14) */ - vma->vm_flags |= VM_LOCKED; -#else vma->vm_flags |= VM_RESERVED; -#endif break; default: return -EINVAL; /* This should never happen. */ } -#if LINUX_VERSION_CODE <= 0x02040e /* KERNEL_VERSION(2,4,14) */ - vma->vm_flags |= VM_LOCKED | VM_SHM; /* Don't swap */ -#else vma->vm_flags |= VM_RESERVED; /* Don't swap */ -#endif vma->vm_file = filp; /* Needed for drm_vm_open() */ drm_vm_open(vma); diff --git a/drivers/char/drm/ffb_drv.c b/drivers/char/drm/ffb_drv.c index ec614fff8f04..1bd0d55ee0f0 100644 --- a/drivers/char/drm/ffb_drv.c +++ b/drivers/char/drm/ffb_drv.c @@ -152,14 +152,11 @@ static drm_map_t *ffb_find_map(struct file *filp, unsigned long off) return NULL; list_for_each(list, &dev->maplist->head) { - unsigned long uoff; - r_list = (drm_map_list_t *)list; map = r_list->map; if (!map) continue; - uoff = (map->offset & 0xffffffff); - if (uoff == off) + if (r_list->user_token == off) return map; } diff --git a/drivers/char/drm/gamma_context.h b/drivers/char/drm/gamma_context.h deleted file mode 100644 index d11b507f87ee..000000000000 --- a/drivers/char/drm/gamma_context.h +++ /dev/null @@ -1,492 +0,0 @@ -/* drm_context.h -- IOCTLs for generic contexts -*- linux-c -*- - * Created: Fri Nov 24 18:31:37 2000 by gareth@valinux.com - * - * Copyright 1999, 2000 Precision Insight, Inc., Cedar Park, Texas. - * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California. - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * - * Authors: - * Rickard E. (Rik) Faith <faith@valinux.com> - * Gareth Hughes <gareth@valinux.com> - * ChangeLog: - * 2001-11-16 Torsten Duwe <duwe@caldera.de> - * added context constructor/destructor hooks, - * needed by SiS driver's memory management. - */ - -/* ================================================================ - * Old-style context support -- only used by gamma. - */ - - -/* The drm_read and drm_write_string code (especially that which manages - the circular buffer), is based on Alessandro Rubini's LINUX DEVICE - DRIVERS (Cambridge: O'Reilly, 1998), pages 111-113. */ - -ssize_t gamma_fops_read(struct file *filp, char __user *buf, size_t count, loff_t *off) -{ - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->dev; - int left; - int avail; - int send; - int cur; - - DRM_DEBUG("%p, %p\n", dev->buf_rp, dev->buf_wp); - - while (dev->buf_rp == dev->buf_wp) { - DRM_DEBUG(" sleeping\n"); - if (filp->f_flags & O_NONBLOCK) { - return -EAGAIN; - } - interruptible_sleep_on(&dev->buf_readers); - if (signal_pending(current)) { - DRM_DEBUG(" interrupted\n"); - return -ERESTARTSYS; - } - DRM_DEBUG(" awake\n"); - } - - left = (dev->buf_rp + DRM_BSZ - dev->buf_wp) % DRM_BSZ; - avail = DRM_BSZ - left; - send = DRM_MIN(avail, count); - - while (send) { - if (dev->buf_wp > dev->buf_rp) { - cur = DRM_MIN(send, dev->buf_wp - dev->buf_rp); - } else { - cur = DRM_MIN(send, dev->buf_end - dev->buf_rp); - } - if (copy_to_user(buf, dev->buf_rp, cur)) - return -EFAULT; - dev->buf_rp += cur; - if (dev->buf_rp == dev->buf_end) dev->buf_rp = dev->buf; - send -= cur; - } - - wake_up_interruptible(&dev->buf_writers); - return DRM_MIN(avail, count); -} - - -/* In an incredibly convoluted setup, the kernel module actually calls - * back into the X server to perform context switches on behalf of the - * 3d clients. - */ -int DRM(write_string)(drm_device_t *dev, const char *s) -{ - int left = (dev->buf_rp + DRM_BSZ - dev->buf_wp) % DRM_BSZ; - int send = strlen(s); - int count; - - DRM_DEBUG("%d left, %d to send (%p, %p)\n", - left, send, dev->buf_rp, dev->buf_wp); - - if (left == 1 || dev->buf_wp != dev->buf_rp) { - DRM_ERROR("Buffer not empty (%d left, wp = %p, rp = %p)\n", - left, - dev->buf_wp, - dev->buf_rp); - } - - while (send) { - if (dev->buf_wp >= dev->buf_rp) { - count = DRM_MIN(send, dev->buf_end - dev->buf_wp); - if (count == left) --count; /* Leave a hole */ - } else { - count = DRM_MIN(send, dev->buf_rp - dev->buf_wp - 1); - } - strncpy(dev->buf_wp, s, count); - dev->buf_wp += count; - if (dev->buf_wp == dev->buf_end) dev->buf_wp = dev->buf; - send -= count; - } - - if (dev->buf_async) kill_fasync(&dev->buf_async, SIGIO, POLL_IN); - - DRM_DEBUG("waking\n"); - wake_up_interruptible(&dev->buf_readers); - return 0; -} - -unsigned int gamma_fops_poll(struct file *filp, struct poll_table_struct *wait) -{ - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->dev; - - poll_wait(filp, &dev->buf_readers, wait); - if (dev->buf_wp != dev->buf_rp) return POLLIN | POLLRDNORM; - return 0; -} - -int DRM(context_switch)(drm_device_t *dev, int old, int new) -{ - char buf[64]; - drm_queue_t *q; - - if (test_and_set_bit(0, &dev->context_flag)) { - DRM_ERROR("Reentering -- FIXME\n"); - return -EBUSY; - } - - DRM_DEBUG("Context switch from %d to %d\n", old, new); - - if (new >= dev->queue_count) { - clear_bit(0, &dev->context_flag); - return -EINVAL; - } - - if (new == dev->last_context) { - clear_bit(0, &dev->context_flag); - return 0; - } - - q = dev->queuelist[new]; - atomic_inc(&q->use_count); - if (atomic_read(&q->use_count) == 1) { - atomic_dec(&q->use_count); - clear_bit(0, &dev->context_flag); - return -EINVAL; - } - - /* This causes the X server to wake up & do a bunch of hardware - * interaction to actually effect the context switch. - */ - sprintf(buf, "C %d %d\n", old, new); - DRM(write_string)(dev, buf); - - atomic_dec(&q->use_count); - - return 0; -} - -int DRM(context_switch_complete)(drm_device_t *dev, int new) -{ - drm_device_dma_t *dma = dev->dma; - - dev->last_context = new; /* PRE/POST: This is the _only_ writer. */ - dev->last_switch = jiffies; - - if (!_DRM_LOCK_IS_HELD(dev->lock.hw_lock->lock)) { - DRM_ERROR("Lock isn't held after context switch\n"); - } - - if (!dma || !(dma->next_buffer && dma->next_buffer->while_locked)) { - if (DRM(lock_free)(dev, &dev->lock.hw_lock->lock, - DRM_KERNEL_CONTEXT)) { - DRM_ERROR("Cannot free lock\n"); - } - } - - clear_bit(0, &dev->context_flag); - wake_up_interruptible(&dev->context_wait); - - return 0; -} - -static int DRM(init_queue)(drm_device_t *dev, drm_queue_t *q, drm_ctx_t *ctx) -{ - DRM_DEBUG("\n"); - - if (atomic_read(&q->use_count) != 1 - || atomic_read(&q->finalization) - || atomic_read(&q->block_count)) { - DRM_ERROR("New queue is already in use: u%d f%d b%d\n", - atomic_read(&q->use_count), - atomic_read(&q->finalization), - atomic_read(&q->block_count)); - } - - atomic_set(&q->finalization, 0); - atomic_set(&q->block_count, 0); - atomic_set(&q->block_read, 0); - atomic_set(&q->block_write, 0); - atomic_set(&q->total_queued, 0); - atomic_set(&q->total_flushed, 0); - atomic_set(&q->total_locks, 0); - - init_waitqueue_head(&q->write_queue); - init_waitqueue_head(&q->read_queue); - init_waitqueue_head(&q->flush_queue); - - q->flags = ctx->flags; - - DRM(waitlist_create)(&q->waitlist, dev->dma->buf_count); - - return 0; -} - - -/* drm_alloc_queue: -PRE: 1) dev->queuelist[0..dev->queue_count] is allocated and will not - disappear (so all deallocation must be done after IOCTLs are off) - 2) dev->queue_count < dev->queue_slots - 3) dev->queuelist[i].use_count == 0 and - dev->queuelist[i].finalization == 0 if i not in use -POST: 1) dev->queuelist[i].use_count == 1 - 2) dev->queue_count < dev->queue_slots */ - -static int DRM(alloc_queue)(drm_device_t *dev) -{ - int i; - drm_queue_t *queue; - int oldslots; - int newslots; - /* Check for a free queue */ - for (i = 0; i < dev->queue_count; i++) { - atomic_inc(&dev->queuelist[i]->use_count); - if (atomic_read(&dev->queuelist[i]->use_count) == 1 - && !atomic_read(&dev->queuelist[i]->finalization)) { - DRM_DEBUG("%d (free)\n", i); - return i; - } - atomic_dec(&dev->queuelist[i]->use_count); - } - /* Allocate a new queue */ - down(&dev->struct_sem); - - queue = DRM(alloc)(sizeof(*queue), DRM_MEM_QUEUES); - memset(queue, 0, sizeof(*queue)); - atomic_set(&queue->use_count, 1); - - ++dev->queue_count; - if (dev->queue_count >= dev->queue_slots) { - oldslots = dev->queue_slots * sizeof(*dev->queuelist); - if (!dev->queue_slots) dev->queue_slots = 1; - dev->queue_slots *= 2; - newslots = dev->queue_slots * sizeof(*dev->queuelist); - - dev->queuelist = DRM(realloc)(dev->queuelist, - oldslots, - newslots, - DRM_MEM_QUEUES); - if (!dev->queuelist) { - up(&dev->struct_sem); - DRM_DEBUG("out of memory\n"); - return -ENOMEM; - } - } - dev->queuelist[dev->queue_count-1] = queue; - - up(&dev->struct_sem); - DRM_DEBUG("%d (new)\n", dev->queue_count - 1); - return dev->queue_count - 1; -} - -int DRM(resctx)(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) -{ - drm_ctx_res_t __user *argp = (void __user *)arg; - drm_ctx_res_t res; - drm_ctx_t ctx; - int i; - - DRM_DEBUG("%d\n", DRM_RESERVED_CONTEXTS); - if (copy_from_user(&res, argp, sizeof(res))) - return -EFAULT; - if (res.count >= DRM_RESERVED_CONTEXTS) { - memset(&ctx, 0, sizeof(ctx)); - for (i = 0; i < DRM_RESERVED_CONTEXTS; i++) { - ctx.handle = i; - if (copy_to_user(&res.contexts[i], - &i, - sizeof(i))) - return -EFAULT; - } - } - res.count = DRM_RESERVED_CONTEXTS; - if (copy_to_user(argp, &res, sizeof(res))) - return -EFAULT; - return 0; -} - -int DRM(addctx)(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) -{ - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->dev; - drm_ctx_t ctx; - drm_ctx_t __user *argp = (void __user *)arg; - - if (copy_from_user(&ctx, argp, sizeof(ctx))) - return -EFAULT; - if ((ctx.handle = DRM(alloc_queue)(dev)) == DRM_KERNEL_CONTEXT) { - /* Init kernel's context and get a new one. */ - DRM(init_queue)(dev, dev->queuelist[ctx.handle], &ctx); - ctx.handle = DRM(alloc_queue)(dev); - } - DRM(init_queue)(dev, dev->queuelist[ctx.handle], &ctx); - DRM_DEBUG("%d\n", ctx.handle); - if (copy_to_user(argp, &ctx, sizeof(ctx))) - return -EFAULT; - return 0; -} - -int DRM(modctx)(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) -{ - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->dev; - drm_ctx_t ctx; - drm_queue_t *q; - - if (copy_from_user(&ctx, (drm_ctx_t __user *)arg, sizeof(ctx))) - return -EFAULT; - - DRM_DEBUG("%d\n", ctx.handle); - - if (ctx.handle < 0 || ctx.handle >= dev->queue_count) return -EINVAL; - q = dev->queuelist[ctx.handle]; - - atomic_inc(&q->use_count); - if (atomic_read(&q->use_count) == 1) { - /* No longer in use */ - atomic_dec(&q->use_count); - return -EINVAL; - } - - if (DRM_BUFCOUNT(&q->waitlist)) { - atomic_dec(&q->use_count); - return -EBUSY; - } - - q->flags = ctx.flags; - - atomic_dec(&q->use_count); - return 0; -} - -int DRM(getctx)(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) -{ - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->dev; - drm_ctx_t __user *argp = (void __user *)arg; - drm_ctx_t ctx; - drm_queue_t *q; - - if (copy_from_user(&ctx, argp, sizeof(ctx))) - return -EFAULT; - - DRM_DEBUG("%d\n", ctx.handle); - - if (ctx.handle >= dev->queue_count) return -EINVAL; - q = dev->queuelist[ctx.handle]; - - atomic_inc(&q->use_count); - if (atomic_read(&q->use_count) == 1) { - /* No longer in use */ - atomic_dec(&q->use_count); - return -EINVAL; - } - - ctx.flags = q->flags; - atomic_dec(&q->use_count); - - if (copy_to_user(argp, &ctx, sizeof(ctx))) - return -EFAULT; - - return 0; -} - -int DRM(switchctx)(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) -{ - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->dev; - drm_ctx_t ctx; - - if (copy_from_user(&ctx, (drm_ctx_t __user *)arg, sizeof(ctx))) - return -EFAULT; - DRM_DEBUG("%d\n", ctx.handle); - return DRM(context_switch)(dev, dev->last_context, ctx.handle); -} - -int DRM(newctx)(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) -{ - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->dev; - drm_ctx_t ctx; - - if (copy_from_user(&ctx, (drm_ctx_t __user *)arg, sizeof(ctx))) - return -EFAULT; - DRM_DEBUG("%d\n", ctx.handle); - DRM(context_switch_complete)(dev, ctx.handle); - - return 0; -} - -int DRM(rmctx)(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) -{ - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->dev; - drm_ctx_t ctx; - drm_queue_t *q; - drm_buf_t *buf; - - if (copy_from_user(&ctx, (drm_ctx_t __user *)arg, sizeof(ctx))) - return -EFAULT; - DRM_DEBUG("%d\n", ctx.handle); - - if (ctx.handle >= dev->queue_count) return -EINVAL; - q = dev->queuelist[ctx.handle]; - - atomic_inc(&q->use_count); - if (atomic_read(&q->use_count) == 1) { - /* No longer in use */ - atomic_dec(&q->use_count); - return -EINVAL; - } - - atomic_inc(&q->finalization); /* Mark queue in finalization state */ - atomic_sub(2, &q->use_count); /* Mark queue as unused (pending - finalization) */ - - while (test_and_set_bit(0, &dev->interrupt_flag)) { - schedule(); - if (signal_pending(current)) { - clear_bit(0, &dev->interrupt_flag); - return -EINTR; - } - } - /* Remove queued buffers */ - while ((buf = DRM(waitlist_get)(&q->waitlist))) { - DRM(free_buffer)(dev, buf); - } - clear_bit(0, &dev->interrupt_flag); - - /* Wakeup blocked processes */ - wake_up_interruptible(&q->read_queue); - wake_up_interruptible(&q->write_queue); - wake_up_interruptible(&q->flush_queue); - - /* Finalization over. Queue is made - available when both use_count and - finalization become 0, which won't - happen until all the waiting processes - stop waiting. */ - atomic_dec(&q->finalization); - return 0; -} - diff --git a/drivers/char/drm/gamma_dma.c b/drivers/char/drm/gamma_dma.c deleted file mode 100644 index e486fb8d31e9..000000000000 --- a/drivers/char/drm/gamma_dma.c +++ /dev/null @@ -1,946 +0,0 @@ -/* gamma_dma.c -- DMA support for GMX 2000 -*- linux-c -*- - * Created: Fri Mar 19 14:30:16 1999 by faith@precisioninsight.com - * - * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas. - * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California. - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * Rickard E. (Rik) Faith <faith@valinux.com> - * - */ - -#include "gamma.h" -#include "drmP.h" -#include "drm.h" -#include "gamma_drm.h" -#include "gamma_drv.h" - -#include <linux/interrupt.h> /* For task queue support */ -#include <linux/delay.h> - -static inline void gamma_dma_dispatch(drm_device_t *dev, unsigned long address, - unsigned long length) -{ - drm_gamma_private_t *dev_priv = - (drm_gamma_private_t *)dev->dev_private; - mb(); - while ( GAMMA_READ(GAMMA_INFIFOSPACE) < 2) - cpu_relax(); - - GAMMA_WRITE(GAMMA_DMAADDRESS, address); - - while (GAMMA_READ(GAMMA_GCOMMANDSTATUS) != 4) - cpu_relax(); - - GAMMA_WRITE(GAMMA_DMACOUNT, length / 4); -} - -void gamma_dma_quiescent_single(drm_device_t *dev) -{ - drm_gamma_private_t *dev_priv = - (drm_gamma_private_t *)dev->dev_private; - while (GAMMA_READ(GAMMA_DMACOUNT)) - cpu_relax(); - - while (GAMMA_READ(GAMMA_INFIFOSPACE) < 2) - cpu_relax(); - - GAMMA_WRITE(GAMMA_FILTERMODE, 1 << 10); - GAMMA_WRITE(GAMMA_SYNC, 0); - - do { - while (!GAMMA_READ(GAMMA_OUTFIFOWORDS)) - cpu_relax(); - } while (GAMMA_READ(GAMMA_OUTPUTFIFO) != GAMMA_SYNC_TAG); -} - -void gamma_dma_quiescent_dual(drm_device_t *dev) -{ - drm_gamma_private_t *dev_priv = - (drm_gamma_private_t *)dev->dev_private; - while (GAMMA_READ(GAMMA_DMACOUNT)) - cpu_relax(); - - while (GAMMA_READ(GAMMA_INFIFOSPACE) < 3) - cpu_relax(); - - GAMMA_WRITE(GAMMA_BROADCASTMASK, 3); - GAMMA_WRITE(GAMMA_FILTERMODE, 1 << 10); - GAMMA_WRITE(GAMMA_SYNC, 0); - - /* Read from first MX */ - do { - while (!GAMMA_READ(GAMMA_OUTFIFOWORDS)) - cpu_relax(); - } while (GAMMA_READ(GAMMA_OUTPUTFIFO) != GAMMA_SYNC_TAG); - - /* Read from second MX */ - do { - while (!GAMMA_READ(GAMMA_OUTFIFOWORDS + 0x10000)) - cpu_relax(); - } while (GAMMA_READ(GAMMA_OUTPUTFIFO + 0x10000) != GAMMA_SYNC_TAG); -} - -void gamma_dma_ready(drm_device_t *dev) -{ - drm_gamma_private_t *dev_priv = - (drm_gamma_private_t *)dev->dev_private; - while (GAMMA_READ(GAMMA_DMACOUNT)) - cpu_relax(); -} - -static inline int gamma_dma_is_ready(drm_device_t *dev) -{ - drm_gamma_private_t *dev_priv = - (drm_gamma_private_t *)dev->dev_private; - return (!GAMMA_READ(GAMMA_DMACOUNT)); -} - -irqreturn_t gamma_driver_irq_handler( DRM_IRQ_ARGS ) -{ - drm_device_t *dev = (drm_device_t *)arg; - drm_device_dma_t *dma = dev->dma; - drm_gamma_private_t *dev_priv = - (drm_gamma_private_t *)dev->dev_private; - - /* FIXME: should check whether we're actually interested in the interrupt? */ - atomic_inc(&dev->counts[6]); /* _DRM_STAT_IRQ */ - - while (GAMMA_READ(GAMMA_INFIFOSPACE) < 3) - cpu_relax(); - - GAMMA_WRITE(GAMMA_GDELAYTIMER, 0xc350/2); /* 0x05S */ - GAMMA_WRITE(GAMMA_GCOMMANDINTFLAGS, 8); - GAMMA_WRITE(GAMMA_GINTFLAGS, 0x2001); - if (gamma_dma_is_ready(dev)) { - /* Free previous buffer */ - if (test_and_set_bit(0, &dev->dma_flag)) - return IRQ_HANDLED; - if (dma->this_buffer) { - gamma_free_buffer(dev, dma->this_buffer); - dma->this_buffer = NULL; - } - clear_bit(0, &dev->dma_flag); - - /* Dispatch new buffer */ - schedule_work(&dev->work); - } - return IRQ_HANDLED; -} - -/* Only called by gamma_dma_schedule. */ -static int gamma_do_dma(drm_device_t *dev, int locked) -{ - unsigned long address; - unsigned long length; - drm_buf_t *buf; - int retcode = 0; - drm_device_dma_t *dma = dev->dma; - - if (test_and_set_bit(0, &dev->dma_flag)) return -EBUSY; - - - if (!dma->next_buffer) { - DRM_ERROR("No next_buffer\n"); - clear_bit(0, &dev->dma_flag); - return -EINVAL; - } - - buf = dma->next_buffer; - /* WE NOW ARE ON LOGICAL PAGES!! - using page table setup in dma_init */ - /* So we pass the buffer index value into the physical page offset */ - address = buf->idx << 12; - length = buf->used; - - DRM_DEBUG("context %d, buffer %d (%ld bytes)\n", - buf->context, buf->idx, length); - - if (buf->list == DRM_LIST_RECLAIM) { - gamma_clear_next_buffer(dev); - gamma_free_buffer(dev, buf); - clear_bit(0, &dev->dma_flag); - return -EINVAL; - } - - if (!length) { - DRM_ERROR("0 length buffer\n"); - gamma_clear_next_buffer(dev); - gamma_free_buffer(dev, buf); - clear_bit(0, &dev->dma_flag); - return 0; - } - - if (!gamma_dma_is_ready(dev)) { - clear_bit(0, &dev->dma_flag); - return -EBUSY; - } - - if (buf->while_locked) { - if (!_DRM_LOCK_IS_HELD(dev->lock.hw_lock->lock)) { - DRM_ERROR("Dispatching buffer %d from pid %d" - " \"while locked\", but no lock held\n", - buf->idx, current->pid); - } - } else { - if (!locked && !gamma_lock_take(&dev->lock.hw_lock->lock, - DRM_KERNEL_CONTEXT)) { - clear_bit(0, &dev->dma_flag); - return -EBUSY; - } - } - - if (dev->last_context != buf->context - && !(dev->queuelist[buf->context]->flags - & _DRM_CONTEXT_PRESERVED)) { - /* PRE: dev->last_context != buf->context */ - if (DRM(context_switch)(dev, dev->last_context, - buf->context)) { - DRM(clear_next_buffer)(dev); - DRM(free_buffer)(dev, buf); - } - retcode = -EBUSY; - goto cleanup; - - /* POST: we will wait for the context - switch and will dispatch on a later call - when dev->last_context == buf->context. - NOTE WE HOLD THE LOCK THROUGHOUT THIS - TIME! */ - } - - gamma_clear_next_buffer(dev); - buf->pending = 1; - buf->waiting = 0; - buf->list = DRM_LIST_PEND; - - /* WE NOW ARE ON LOGICAL PAGES!!! - overriding address */ - address = buf->idx << 12; - - gamma_dma_dispatch(dev, address, length); - gamma_free_buffer(dev, dma->this_buffer); - dma->this_buffer = buf; - - atomic_inc(&dev->counts[7]); /* _DRM_STAT_DMA */ - atomic_add(length, &dev->counts[8]); /* _DRM_STAT_PRIMARY */ - - if (!buf->while_locked && !dev->context_flag && !locked) { - if (gamma_lock_free(dev, &dev->lock.hw_lock->lock, - DRM_KERNEL_CONTEXT)) { - DRM_ERROR("\n"); - } - } -cleanup: - - clear_bit(0, &dev->dma_flag); - - - return retcode; -} - -static void gamma_dma_timer_bh(unsigned long dev) -{ - gamma_dma_schedule((drm_device_t *)dev, 0); -} - -void gamma_irq_immediate_bh(void *dev) -{ - gamma_dma_schedule(dev, 0); -} - -int gamma_dma_schedule(drm_device_t *dev, int locked) -{ - int next; - drm_queue_t *q; - drm_buf_t *buf; - int retcode = 0; - int processed = 0; - int missed; - int expire = 20; - drm_device_dma_t *dma = dev->dma; - - if (test_and_set_bit(0, &dev->interrupt_flag)) { - /* Not reentrant */ - atomic_inc(&dev->counts[10]); /* _DRM_STAT_MISSED */ - return -EBUSY; - } - missed = atomic_read(&dev->counts[10]); - - -again: - if (dev->context_flag) { - clear_bit(0, &dev->interrupt_flag); - return -EBUSY; - } - if (dma->next_buffer) { - /* Unsent buffer that was previously - selected, but that couldn't be sent - because the lock could not be obtained - or the DMA engine wasn't ready. Try - again. */ - if (!(retcode = gamma_do_dma(dev, locked))) ++processed; - } else { - do { - next = gamma_select_queue(dev, gamma_dma_timer_bh); - if (next >= 0) { - q = dev->queuelist[next]; - buf = gamma_waitlist_get(&q->waitlist); - dma->next_buffer = buf; - dma->next_queue = q; - if (buf && buf->list == DRM_LIST_RECLAIM) { - gamma_clear_next_buffer(dev); - gamma_free_buffer(dev, buf); - } - } - } while (next >= 0 && !dma->next_buffer); - if (dma->next_buffer) { - if (!(retcode = gamma_do_dma(dev, locked))) { - ++processed; - } - } - } - - if (--expire) { - if (missed != atomic_read(&dev->counts[10])) { - if (gamma_dma_is_ready(dev)) goto again; - } - if (processed && gamma_dma_is_ready(dev)) { - processed = 0; - goto again; - } - } - - clear_bit(0, &dev->interrupt_flag); - - return retcode; -} - -static int gamma_dma_priority(struct file *filp, - drm_device_t *dev, drm_dma_t *d) -{ - unsigned long address; - unsigned long length; - int must_free = 0; - int retcode = 0; - int i; - int idx; - drm_buf_t *buf; - drm_buf_t *last_buf = NULL; - drm_device_dma_t *dma = dev->dma; - int *send_indices = NULL; - int *send_sizes = NULL; - - DECLARE_WAITQUEUE(entry, current); - - /* Turn off interrupt handling */ - while (test_and_set_bit(0, &dev->interrupt_flag)) { - schedule(); - if (signal_pending(current)) return -EINTR; - } - if (!(d->flags & _DRM_DMA_WHILE_LOCKED)) { - while (!gamma_lock_take(&dev->lock.hw_lock->lock, - DRM_KERNEL_CONTEXT)) { - schedule(); - if (signal_pending(current)) { - clear_bit(0, &dev->interrupt_flag); - return -EINTR; - } - } - ++must_free; - } - - send_indices = DRM(alloc)(d->send_count * sizeof(*send_indices), - DRM_MEM_DRIVER); - if (send_indices == NULL) - return -ENOMEM; - if (copy_from_user(send_indices, d->send_indices, - d->send_count * sizeof(*send_indices))) { - retcode = -EFAULT; - goto cleanup; - } - - send_sizes = DRM(alloc)(d->send_count * sizeof(*send_sizes), - DRM_MEM_DRIVER); - if (send_sizes == NULL) - return -ENOMEM; - if (copy_from_user(send_sizes, d->send_sizes, - d->send_count * sizeof(*send_sizes))) { - retcode = -EFAULT; - goto cleanup; - } - - for (i = 0; i < d->send_count; i++) { - idx = send_indices[i]; - if (idx < 0 || idx >= dma->buf_count) { - DRM_ERROR("Index %d (of %d max)\n", - send_indices[i], dma->buf_count - 1); - continue; - } - buf = dma->buflist[ idx ]; - if (buf->filp != filp) { - DRM_ERROR("Process %d using buffer not owned\n", - current->pid); - retcode = -EINVAL; - goto cleanup; - } - if (buf->list != DRM_LIST_NONE) { - DRM_ERROR("Process %d using buffer on list %d\n", - current->pid, buf->list); - retcode = -EINVAL; - goto cleanup; - } - /* This isn't a race condition on - buf->list, since our concern is the - buffer reclaim during the time the - process closes the /dev/drm? handle, so - it can't also be doing DMA. */ - buf->list = DRM_LIST_PRIO; - buf->used = send_sizes[i]; - buf->context = d->context; - buf->while_locked = d->flags & _DRM_DMA_WHILE_LOCKED; - address = (unsigned long)buf->address; - length = buf->used; - if (!length) { - DRM_ERROR("0 length buffer\n"); - } - if (buf->pending) { - DRM_ERROR("Sending pending buffer:" - " buffer %d, offset %d\n", - send_indices[i], i); - retcode = -EINVAL; - goto cleanup; - } - if (buf->waiting) { - DRM_ERROR("Sending waiting buffer:" - " buffer %d, offset %d\n", - send_indices[i], i); - retcode = -EINVAL; - goto cleanup; - } - buf->pending = 1; - - if (dev->last_context != buf->context - && !(dev->queuelist[buf->context]->flags - & _DRM_CONTEXT_PRESERVED)) { - add_wait_queue(&dev->context_wait, &entry); - current->state = TASK_INTERRUPTIBLE; - /* PRE: dev->last_context != buf->context */ - DRM(context_switch)(dev, dev->last_context, - buf->context); - /* POST: we will wait for the context - switch and will dispatch on a later call - when dev->last_context == buf->context. - NOTE WE HOLD THE LOCK THROUGHOUT THIS - TIME! */ - schedule(); - current->state = TASK_RUNNING; - remove_wait_queue(&dev->context_wait, &entry); - if (signal_pending(current)) { - retcode = -EINTR; - goto cleanup; - } - if (dev->last_context != buf->context) { - DRM_ERROR("Context mismatch: %d %d\n", - dev->last_context, - buf->context); - } - } - - gamma_dma_dispatch(dev, address, length); - atomic_inc(&dev->counts[9]); /* _DRM_STAT_SPECIAL */ - atomic_add(length, &dev->counts[8]); /* _DRM_STAT_PRIMARY */ - - if (last_buf) { - gamma_free_buffer(dev, last_buf); - } - last_buf = buf; - } - - -cleanup: - if (last_buf) { - gamma_dma_ready(dev); - gamma_free_buffer(dev, last_buf); - } - if (send_indices) - DRM(free)(send_indices, d->send_count * sizeof(*send_indices), - DRM_MEM_DRIVER); - if (send_sizes) - DRM(free)(send_sizes, d->send_count * sizeof(*send_sizes), - DRM_MEM_DRIVER); - - if (must_free && !dev->context_flag) { - if (gamma_lock_free(dev, &dev->lock.hw_lock->lock, - DRM_KERNEL_CONTEXT)) { - DRM_ERROR("\n"); - } - } - clear_bit(0, &dev->interrupt_flag); - return retcode; -} - -static int gamma_dma_send_buffers(struct file *filp, - drm_device_t *dev, drm_dma_t *d) -{ - DECLARE_WAITQUEUE(entry, current); - drm_buf_t *last_buf = NULL; - int retcode = 0; - drm_device_dma_t *dma = dev->dma; - int send_index; - - if (get_user(send_index, &d->send_indices[d->send_count-1])) - return -EFAULT; - - if (d->flags & _DRM_DMA_BLOCK) { - last_buf = dma->buflist[send_index]; - add_wait_queue(&last_buf->dma_wait, &entry); - } - - if ((retcode = gamma_dma_enqueue(filp, d))) { - if (d->flags & _DRM_DMA_BLOCK) - remove_wait_queue(&last_buf->dma_wait, &entry); - return retcode; - } - - gamma_dma_schedule(dev, 0); - - if (d->flags & _DRM_DMA_BLOCK) { - DRM_DEBUG("%d waiting\n", current->pid); - for (;;) { - current->state = TASK_INTERRUPTIBLE; - if (!last_buf->waiting && !last_buf->pending) - break; /* finished */ - schedule(); - if (signal_pending(current)) { - retcode = -EINTR; /* Can't restart */ - break; - } - } - current->state = TASK_RUNNING; - DRM_DEBUG("%d running\n", current->pid); - remove_wait_queue(&last_buf->dma_wait, &entry); - if (!retcode - || (last_buf->list==DRM_LIST_PEND && !last_buf->pending)) { - if (!waitqueue_active(&last_buf->dma_wait)) { - gamma_free_buffer(dev, last_buf); - } - } - if (retcode) { - DRM_ERROR("ctx%d w%d p%d c%ld i%d l%d pid:%d\n", - d->context, - last_buf->waiting, - last_buf->pending, - (long)DRM_WAITCOUNT(dev, d->context), - last_buf->idx, - last_buf->list, - current->pid); - } - } - return retcode; -} - -int gamma_dma(struct inode *inode, struct file *filp, unsigned int cmd, - unsigned long arg) -{ - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->dev; - drm_device_dma_t *dma = dev->dma; - int retcode = 0; - drm_dma_t __user *argp = (void __user *)arg; - drm_dma_t d; - - if (copy_from_user(&d, argp, sizeof(d))) - return -EFAULT; - - if (d.send_count < 0 || d.send_count > dma->buf_count) { - DRM_ERROR("Process %d trying to send %d buffers (of %d max)\n", - current->pid, d.send_count, dma->buf_count); - return -EINVAL; - } - - if (d.request_count < 0 || d.request_count > dma->buf_count) { - DRM_ERROR("Process %d trying to get %d buffers (of %d max)\n", - current->pid, d.request_count, dma->buf_count); - return -EINVAL; - } - - if (d.send_count) { - if (d.flags & _DRM_DMA_PRIORITY) - retcode = gamma_dma_priority(filp, dev, &d); - else - retcode = gamma_dma_send_buffers(filp, dev, &d); - } - - d.granted_count = 0; - - if (!retcode && d.request_count) { - retcode = gamma_dma_get_buffers(filp, &d); - } - - DRM_DEBUG("%d returning, granted = %d\n", - current->pid, d.granted_count); - if (copy_to_user(argp, &d, sizeof(d))) - return -EFAULT; - - return retcode; -} - -/* ============================================================= - * DMA initialization, cleanup - */ - -static int gamma_do_init_dma( drm_device_t *dev, drm_gamma_init_t *init ) -{ - drm_gamma_private_t *dev_priv; - drm_device_dma_t *dma = dev->dma; - drm_buf_t *buf; - int i; - struct list_head *list; - unsigned long *pgt; - - DRM_DEBUG( "%s\n", __FUNCTION__ ); - - dev_priv = DRM(alloc)( sizeof(drm_gamma_private_t), - DRM_MEM_DRIVER ); - if ( !dev_priv ) - return -ENOMEM; - - dev->dev_private = (void *)dev_priv; - - memset( dev_priv, 0, sizeof(drm_gamma_private_t) ); - - dev_priv->num_rast = init->num_rast; - - list_for_each(list, &dev->maplist->head) { - drm_map_list_t *r_list = list_entry(list, drm_map_list_t, head); - if( r_list->map && - r_list->map->type == _DRM_SHM && - r_list->map->flags & _DRM_CONTAINS_LOCK ) { - dev_priv->sarea = r_list->map; - break; - } - } - - dev_priv->mmio0 = drm_core_findmap(dev, init->mmio0); - dev_priv->mmio1 = drm_core_findmap(dev, init->mmio1); - dev_priv->mmio2 = drm_core_findmap(dev, init->mmio2); - dev_priv->mmio3 = drm_core_findmap(dev, init->mmio3); - - dev_priv->sarea_priv = (drm_gamma_sarea_t *) - ((u8 *)dev_priv->sarea->handle + - init->sarea_priv_offset); - - if (init->pcimode) { - buf = dma->buflist[GLINT_DRI_BUF_COUNT]; - pgt = buf->address; - - for (i = 0; i < GLINT_DRI_BUF_COUNT; i++) { - buf = dma->buflist[i]; - *pgt = virt_to_phys((void*)buf->address) | 0x07; - pgt++; - } - - buf = dma->buflist[GLINT_DRI_BUF_COUNT]; - } else { - dev->agp_buffer_map = drm_core_findmap(dev, init->buffers_offset); - drm_core_ioremap( dev->agp_buffer_map, dev); - - buf = dma->buflist[GLINT_DRI_BUF_COUNT]; - pgt = buf->address; - - for (i = 0; i < GLINT_DRI_BUF_COUNT; i++) { - buf = dma->buflist[i]; - *pgt = (unsigned long)buf->address + 0x07; - pgt++; - } - - buf = dma->buflist[GLINT_DRI_BUF_COUNT]; - - while (GAMMA_READ(GAMMA_INFIFOSPACE) < 1); - GAMMA_WRITE( GAMMA_GDMACONTROL, 0xe); - } - while (GAMMA_READ(GAMMA_INFIFOSPACE) < 2); - GAMMA_WRITE( GAMMA_PAGETABLEADDR, virt_to_phys((void*)buf->address) ); - GAMMA_WRITE( GAMMA_PAGETABLELENGTH, 2 ); - - return 0; -} - -int gamma_do_cleanup_dma( drm_device_t *dev ) -{ - DRM_DEBUG( "%s\n", __FUNCTION__ ); - - /* Make sure interrupts are disabled here because the uninstall ioctl - * may not have been called from userspace and after dev_private - * is freed, it's too late. - */ - if (drm_core_check_feature(dev, DRIVER_HAVE_IRQ)) - if ( dev->irq_enabled ) - DRM(irq_uninstall)(dev); - - if ( dev->dev_private ) { - - if ( dev->agp_buffer_map != NULL ) - drm_core_ioremapfree( dev->agp_buffer_map, dev ); - - DRM(free)( dev->dev_private, sizeof(drm_gamma_private_t), - DRM_MEM_DRIVER ); - dev->dev_private = NULL; - } - - return 0; -} - -int gamma_dma_init( struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg ) -{ - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->dev; - drm_gamma_init_t init; - - LOCK_TEST_WITH_RETURN( dev, filp ); - - if ( copy_from_user( &init, (drm_gamma_init_t __user *)arg, sizeof(init) ) ) - return -EFAULT; - - switch ( init.func ) { - case GAMMA_INIT_DMA: - return gamma_do_init_dma( dev, &init ); - case GAMMA_CLEANUP_DMA: - return gamma_do_cleanup_dma( dev ); - } - - return -EINVAL; -} - -static int gamma_do_copy_dma( drm_device_t *dev, drm_gamma_copy_t *copy ) -{ - drm_device_dma_t *dma = dev->dma; - unsigned int *screenbuf; - - DRM_DEBUG( "%s\n", __FUNCTION__ ); - - /* We've DRM_RESTRICTED this DMA buffer */ - - screenbuf = dma->buflist[ GLINT_DRI_BUF_COUNT + 1 ]->address; - -#if 0 - *buffer++ = 0x180; /* Tag (FilterMode) */ - *buffer++ = 0x200; /* Allow FBColor through */ - *buffer++ = 0x53B; /* Tag */ - *buffer++ = copy->Pitch; - *buffer++ = 0x53A; /* Tag */ - *buffer++ = copy->SrcAddress; - *buffer++ = 0x539; /* Tag */ - *buffer++ = copy->WidthHeight; /* Initiates transfer */ - *buffer++ = 0x53C; /* Tag - DMAOutputAddress */ - *buffer++ = virt_to_phys((void*)screenbuf); - *buffer++ = 0x53D; /* Tag - DMAOutputCount */ - *buffer++ = copy->Count; /* Reads HostOutFifo BLOCKS until ..*/ - - /* Data now sitting in dma->buflist[ GLINT_DRI_BUF_COUNT + 1 ] */ - /* Now put it back to the screen */ - - *buffer++ = 0x180; /* Tag (FilterMode) */ - *buffer++ = 0x400; /* Allow Sync through */ - *buffer++ = 0x538; /* Tag - DMARectangleReadTarget */ - *buffer++ = 0x155; /* FBSourceData | count */ - *buffer++ = 0x537; /* Tag */ - *buffer++ = copy->Pitch; - *buffer++ = 0x536; /* Tag */ - *buffer++ = copy->DstAddress; - *buffer++ = 0x535; /* Tag */ - *buffer++ = copy->WidthHeight; /* Initiates transfer */ - *buffer++ = 0x530; /* Tag - DMAAddr */ - *buffer++ = virt_to_phys((void*)screenbuf); - *buffer++ = 0x531; - *buffer++ = copy->Count; /* initiates DMA transfer of color data */ -#endif - - /* need to dispatch it now */ - - return 0; -} - -int gamma_dma_copy( struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg ) -{ - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->dev; - drm_gamma_copy_t copy; - - if ( copy_from_user( ©, (drm_gamma_copy_t __user *)arg, sizeof(copy) ) ) - return -EFAULT; - - return gamma_do_copy_dma( dev, © ); -} - -/* ============================================================= - * Per Context SAREA Support - */ - -int gamma_getsareactx(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) -{ - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->dev; - drm_ctx_priv_map_t __user *argp = (void __user *)arg; - drm_ctx_priv_map_t request; - drm_map_t *map; - - if (copy_from_user(&request, argp, sizeof(request))) - return -EFAULT; - - down(&dev->struct_sem); - if ((int)request.ctx_id >= dev->max_context) { - up(&dev->struct_sem); - return -EINVAL; - } - - map = dev->context_sareas[request.ctx_id]; - up(&dev->struct_sem); - - request.handle = map->handle; - if (copy_to_user(argp, &request, sizeof(request))) - return -EFAULT; - return 0; -} - -int gamma_setsareactx(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) -{ - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->dev; - drm_ctx_priv_map_t request; - drm_map_t *map = NULL; - drm_map_list_t *r_list; - struct list_head *list; - - if (copy_from_user(&request, - (drm_ctx_priv_map_t __user *)arg, - sizeof(request))) - return -EFAULT; - - down(&dev->struct_sem); - r_list = NULL; - list_for_each(list, &dev->maplist->head) { - r_list = list_entry(list, drm_map_list_t, head); - if(r_list->map && - r_list->map->handle == request.handle) break; - } - if (list == &(dev->maplist->head)) { - up(&dev->struct_sem); - return -EINVAL; - } - map = r_list->map; - up(&dev->struct_sem); - - if (!map) return -EINVAL; - - down(&dev->struct_sem); - if ((int)request.ctx_id >= dev->max_context) { - up(&dev->struct_sem); - return -EINVAL; - } - dev->context_sareas[request.ctx_id] = map; - up(&dev->struct_sem); - return 0; -} - -void gamma_driver_irq_preinstall( drm_device_t *dev ) { - drm_gamma_private_t *dev_priv = - (drm_gamma_private_t *)dev->dev_private; - - while(GAMMA_READ(GAMMA_INFIFOSPACE) < 2) - cpu_relax(); - - GAMMA_WRITE( GAMMA_GCOMMANDMODE, 0x00000004 ); - GAMMA_WRITE( GAMMA_GDMACONTROL, 0x00000000 ); -} - -void gamma_driver_irq_postinstall( drm_device_t *dev ) { - drm_gamma_private_t *dev_priv = - (drm_gamma_private_t *)dev->dev_private; - - while(GAMMA_READ(GAMMA_INFIFOSPACE) < 3) - cpu_relax(); - - GAMMA_WRITE( GAMMA_GINTENABLE, 0x00002001 ); - GAMMA_WRITE( GAMMA_COMMANDINTENABLE, 0x00000008 ); - GAMMA_WRITE( GAMMA_GDELAYTIMER, 0x00039090 ); -} - -void gamma_driver_irq_uninstall( drm_device_t *dev ) { - drm_gamma_private_t *dev_priv = - (drm_gamma_private_t *)dev->dev_private; - if (!dev_priv) - return; - - while(GAMMA_READ(GAMMA_INFIFOSPACE) < 3) - cpu_relax(); - - GAMMA_WRITE( GAMMA_GDELAYTIMER, 0x00000000 ); - GAMMA_WRITE( GAMMA_COMMANDINTENABLE, 0x00000000 ); - GAMMA_WRITE( GAMMA_GINTENABLE, 0x00000000 ); -} - -extern drm_ioctl_desc_t DRM(ioctls)[]; - -static int gamma_driver_preinit(drm_device_t *dev) -{ - /* reset the finish ioctl */ - DRM(ioctls)[DRM_IOCTL_NR(DRM_IOCTL_FINISH)].func = DRM(finish); - return 0; -} - -static void gamma_driver_pretakedown(drm_device_t *dev) -{ - gamma_do_cleanup_dma(dev); -} - -static void gamma_driver_dma_ready(drm_device_t *dev) -{ - gamma_dma_ready(dev); -} - -static int gamma_driver_dma_quiescent(drm_device_t *dev) -{ - drm_gamma_private_t *dev_priv = ( - drm_gamma_private_t *)dev->dev_private; - if (dev_priv->num_rast == 2) - gamma_dma_quiescent_dual(dev); - else gamma_dma_quiescent_single(dev); - return 0; -} - -void gamma_driver_register_fns(drm_device_t *dev) -{ - dev->driver_features = DRIVER_USE_AGP | DRIVER_USE_MTRR | DRIVER_PCI_DMA | DRIVER_HAVE_DMA | DRIVER_HAVE_IRQ; - DRM(fops).read = gamma_fops_read; - DRM(fops).poll = gamma_fops_poll; - dev->driver.preinit = gamma_driver_preinit; - dev->driver.pretakedown = gamma_driver_pretakedown; - dev->driver.dma_ready = gamma_driver_dma_ready; - dev->driver.dma_quiescent = gamma_driver_dma_quiescent; - dev->driver.dma_flush_block_and_flush = gamma_flush_block_and_flush; - dev->driver.dma_flush_unblock = gamma_flush_unblock; -} diff --git a/drivers/char/drm/gamma_drm.h b/drivers/char/drm/gamma_drm.h deleted file mode 100644 index 20819ded0e15..000000000000 --- a/drivers/char/drm/gamma_drm.h +++ /dev/null @@ -1,90 +0,0 @@ -#ifndef _GAMMA_DRM_H_ -#define _GAMMA_DRM_H_ - -typedef struct _drm_gamma_tex_region { - unsigned char next, prev; /* indices to form a circular LRU */ - unsigned char in_use; /* owned by a client, or free? */ - int age; /* tracked by clients to update local LRU's */ -} drm_gamma_tex_region_t; - -typedef struct { - unsigned int GDeltaMode; - unsigned int GDepthMode; - unsigned int GGeometryMode; - unsigned int GTransformMode; -} drm_gamma_context_regs_t; - -typedef struct _drm_gamma_sarea { - drm_gamma_context_regs_t context_state; - - unsigned int dirty; - - - /* Maintain an LRU of contiguous regions of texture space. If - * you think you own a region of texture memory, and it has an - * age different to the one you set, then you are mistaken and - * it has been stolen by another client. If global texAge - * hasn't changed, there is no need to walk the list. - * - * These regions can be used as a proxy for the fine-grained - * texture information of other clients - by maintaining them - * in the same lru which is used to age their own textures, - * clients have an approximate lru for the whole of global - * texture space, and can make informed decisions as to which - * areas to kick out. There is no need to choose whether to - * kick out your own texture or someone else's - simply eject - * them all in LRU order. - */ - -#define GAMMA_NR_TEX_REGIONS 64 - drm_gamma_tex_region_t texList[GAMMA_NR_TEX_REGIONS+1]; - /* Last elt is sentinal */ - int texAge; /* last time texture was uploaded */ - int last_enqueue; /* last time a buffer was enqueued */ - int last_dispatch; /* age of the most recently dispatched buffer */ - int last_quiescent; /* */ - int ctxOwner; /* last context to upload state */ - - int vertex_prim; -} drm_gamma_sarea_t; - -/* WARNING: If you change any of these defines, make sure to change the - * defines in the Xserver file (xf86drmGamma.h) - */ - -/* Gamma specific ioctls - * The device specific ioctl range is 0x40 to 0x79. - */ -#define DRM_IOCTL_GAMMA_INIT DRM_IOW( 0x40, drm_gamma_init_t) -#define DRM_IOCTL_GAMMA_COPY DRM_IOW( 0x41, drm_gamma_copy_t) - -typedef struct drm_gamma_copy { - unsigned int DMAOutputAddress; - unsigned int DMAOutputCount; - unsigned int DMAReadGLINTSource; - unsigned int DMARectangleWriteAddress; - unsigned int DMARectangleWriteLinePitch; - unsigned int DMARectangleWrite; - unsigned int DMARectangleReadAddress; - unsigned int DMARectangleReadLinePitch; - unsigned int DMARectangleRead; - unsigned int DMARectangleReadTarget; -} drm_gamma_copy_t; - -typedef struct drm_gamma_init { - enum { - GAMMA_INIT_DMA = 0x01, - GAMMA_CLEANUP_DMA = 0x02 - } func; - - int sarea_priv_offset; - int pcimode; - unsigned int mmio0; - unsigned int mmio1; - unsigned int mmio2; - unsigned int mmio3; - unsigned int buffers_offset; - int num_rast; -} drm_gamma_init_t; - -#endif /* _GAMMA_DRM_H_ */ diff --git a/drivers/char/drm/gamma_drv.c b/drivers/char/drm/gamma_drv.c deleted file mode 100644 index e7e64b62792a..000000000000 --- a/drivers/char/drm/gamma_drv.c +++ /dev/null @@ -1,59 +0,0 @@ -/* gamma.c -- 3dlabs GMX 2000 driver -*- linux-c -*- - * Created: Mon Jan 4 08:58:31 1999 by faith@precisioninsight.com - * - * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas. - * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California. - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * Rickard E. (Rik) Faith <faith@valinux.com> - * Gareth Hughes <gareth@valinux.com> - */ - -#include <linux/config.h> -#include "gamma.h" -#include "drmP.h" -#include "drm.h" -#include "gamma_drm.h" -#include "gamma_drv.h" - -#include "drm_auth.h" -#include "drm_agpsupport.h" -#include "drm_bufs.h" -#include "gamma_context.h" /* NOTE! */ -#include "drm_dma.h" -#include "gamma_old_dma.h" /* NOTE */ -#include "drm_drawable.h" -#include "drm_drv.h" - -#include "drm_fops.h" -#include "drm_init.h" -#include "drm_ioctl.h" -#include "drm_irq.h" -#include "gamma_lists.h" /* NOTE */ -#include "drm_lock.h" -#include "gamma_lock.h" /* NOTE */ -#include "drm_memory.h" -#include "drm_proc.h" -#include "drm_vm.h" -#include "drm_stub.h" -#include "drm_scatter.h" diff --git a/drivers/char/drm/gamma_drv.h b/drivers/char/drm/gamma_drv.h deleted file mode 100644 index 146fcc6253cd..000000000000 --- a/drivers/char/drm/gamma_drv.h +++ /dev/null @@ -1,147 +0,0 @@ -/* gamma_drv.h -- Private header for 3dlabs GMX 2000 driver -*- linux-c -*- - * Created: Mon Jan 4 10:05:05 1999 by faith@precisioninsight.com - * - * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas. - * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California. - * All rights reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * Rickard E. (Rik) Faith <faith@valinux.com> - * - */ - -#ifndef _GAMMA_DRV_H_ -#define _GAMMA_DRV_H_ - -typedef struct drm_gamma_private { - drm_gamma_sarea_t *sarea_priv; - drm_map_t *sarea; - drm_map_t *mmio0; - drm_map_t *mmio1; - drm_map_t *mmio2; - drm_map_t *mmio3; - int num_rast; -} drm_gamma_private_t; - - /* gamma_dma.c */ -extern int gamma_dma_init( struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg ); -extern int gamma_dma_copy( struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg ); - -extern int gamma_do_cleanup_dma( drm_device_t *dev ); -extern void gamma_dma_ready(drm_device_t *dev); -extern void gamma_dma_quiescent_single(drm_device_t *dev); -extern void gamma_dma_quiescent_dual(drm_device_t *dev); - - /* gamma_dma.c */ -extern int gamma_dma_schedule(drm_device_t *dev, int locked); -extern int gamma_dma(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg); -extern int gamma_find_devices(void); -extern int gamma_found(void); - -/* Gamma-specific code pulled from drm_fops.h: - */ -extern int DRM(finish)(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg); -extern int DRM(flush_unblock)(drm_device_t *dev, int context, - drm_lock_flags_t flags); -extern int DRM(flush_block_and_flush)(drm_device_t *dev, int context, - drm_lock_flags_t flags); - -/* Gamma-specific code pulled from drm_dma.h: - */ -extern void DRM(clear_next_buffer)(drm_device_t *dev); -extern int DRM(select_queue)(drm_device_t *dev, - void (*wrapper)(unsigned long)); -extern int DRM(dma_enqueue)(struct file *filp, drm_dma_t *dma); -extern int DRM(dma_get_buffers)(struct file *filp, drm_dma_t *dma); - - -/* Gamma-specific code pulled from drm_lists.h (now renamed gamma_lists.h): - */ -extern int DRM(waitlist_create)(drm_waitlist_t *bl, int count); -extern int DRM(waitlist_destroy)(drm_waitlist_t *bl); -extern int DRM(waitlist_put)(drm_waitlist_t *bl, drm_buf_t *buf); -extern drm_buf_t *DRM(waitlist_get)(drm_waitlist_t *bl); -extern int DRM(freelist_create)(drm_freelist_t *bl, int count); -extern int DRM(freelist_destroy)(drm_freelist_t *bl); -extern int DRM(freelist_put)(drm_device_t *dev, drm_freelist_t *bl, - drm_buf_t *buf); -extern drm_buf_t *DRM(freelist_get)(drm_freelist_t *bl, int block); - -/* externs for gamma changes to the ops */ -extern struct file_operations DRM(fops); -extern unsigned int gamma_fops_poll(struct file *filp, struct poll_table_struct *wait); -extern ssize_t gamma_fops_read(struct file *filp, char __user *buf, size_t count, loff_t *off); - - -#define GLINT_DRI_BUF_COUNT 256 - -#define GAMMA_OFF(reg) \ - ((reg < 0x1000) \ - ? reg \ - : ((reg < 0x10000) \ - ? (reg - 0x1000) \ - : ((reg < 0x11000) \ - ? (reg - 0x10000) \ - : (reg - 0x11000)))) - -#define GAMMA_BASE(reg) ((unsigned long) \ - ((reg < 0x1000) ? dev_priv->mmio0->handle : \ - ((reg < 0x10000) ? dev_priv->mmio1->handle : \ - ((reg < 0x11000) ? dev_priv->mmio2->handle : \ - dev_priv->mmio3->handle)))) -#define GAMMA_ADDR(reg) (GAMMA_BASE(reg) + GAMMA_OFF(reg)) -#define GAMMA_DEREF(reg) *(__volatile__ int *)GAMMA_ADDR(reg) -#define GAMMA_READ(reg) GAMMA_DEREF(reg) -#define GAMMA_WRITE(reg,val) do { GAMMA_DEREF(reg) = val; } while (0) - -#define GAMMA_BROADCASTMASK 0x9378 -#define GAMMA_COMMANDINTENABLE 0x0c48 -#define GAMMA_DMAADDRESS 0x0028 -#define GAMMA_DMACOUNT 0x0030 -#define GAMMA_FILTERMODE 0x8c00 -#define GAMMA_GCOMMANDINTFLAGS 0x0c50 -#define GAMMA_GCOMMANDMODE 0x0c40 -#define GAMMA_QUEUED_DMA_MODE 1<<1 -#define GAMMA_GCOMMANDSTATUS 0x0c60 -#define GAMMA_GDELAYTIMER 0x0c38 -#define GAMMA_GDMACONTROL 0x0060 -#define GAMMA_USE_AGP 1<<1 -#define GAMMA_GINTENABLE 0x0808 -#define GAMMA_GINTFLAGS 0x0810 -#define GAMMA_INFIFOSPACE 0x0018 -#define GAMMA_OUTFIFOWORDS 0x0020 -#define GAMMA_OUTPUTFIFO 0x2000 -#define GAMMA_SYNC 0x8c40 -#define GAMMA_SYNC_TAG 0x0188 -#define GAMMA_PAGETABLEADDR 0x0C00 -#define GAMMA_PAGETABLELENGTH 0x0C08 - -#define GAMMA_PASSTHROUGH 0x1FE -#define GAMMA_DMAADDRTAG 0x530 -#define GAMMA_DMACOUNTTAG 0x531 -#define GAMMA_COMMANDINTTAG 0x532 - -#endif diff --git a/drivers/char/drm/gamma_lists.h b/drivers/char/drm/gamma_lists.h deleted file mode 100644 index 2d93f412b96b..000000000000 --- a/drivers/char/drm/gamma_lists.h +++ /dev/null @@ -1,215 +0,0 @@ -/* drm_lists.h -- Buffer list handling routines -*- linux-c -*- - * Created: Mon Apr 19 20:54:22 1999 by faith@valinux.com - * - * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas. - * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California. - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * - * Authors: - * Rickard E. (Rik) Faith <faith@valinux.com> - * Gareth Hughes <gareth@valinux.com> - */ - -#include "drmP.h" - - -int DRM(waitlist_create)(drm_waitlist_t *bl, int count) -{ - if (bl->count) return -EINVAL; - - bl->bufs = DRM(alloc)((bl->count + 2) * sizeof(*bl->bufs), - DRM_MEM_BUFLISTS); - - if(!bl->bufs) return -ENOMEM; - memset(bl->bufs, 0, sizeof(*bl->bufs)); - bl->count = count; - bl->rp = bl->bufs; - bl->wp = bl->bufs; - bl->end = &bl->bufs[bl->count+1]; - spin_lock_init(&bl->write_lock); - spin_lock_init(&bl->read_lock); - return 0; -} - -int DRM(waitlist_destroy)(drm_waitlist_t *bl) -{ - if (bl->rp != bl->wp) return -EINVAL; - if (bl->bufs) DRM(free)(bl->bufs, - (bl->count + 2) * sizeof(*bl->bufs), - DRM_MEM_BUFLISTS); - bl->count = 0; - bl->bufs = NULL; - bl->rp = NULL; - bl->wp = NULL; - bl->end = NULL; - return 0; -} - -int DRM(waitlist_put)(drm_waitlist_t *bl, drm_buf_t *buf) -{ - int left; - unsigned long flags; - - left = DRM_LEFTCOUNT(bl); - if (!left) { - DRM_ERROR("Overflow while adding buffer %d from filp %p\n", - buf->idx, buf->filp); - return -EINVAL; - } - buf->list = DRM_LIST_WAIT; - - spin_lock_irqsave(&bl->write_lock, flags); - *bl->wp = buf; - if (++bl->wp >= bl->end) bl->wp = bl->bufs; - spin_unlock_irqrestore(&bl->write_lock, flags); - - return 0; -} - -drm_buf_t *DRM(waitlist_get)(drm_waitlist_t *bl) -{ - drm_buf_t *buf; - unsigned long flags; - - spin_lock_irqsave(&bl->read_lock, flags); - buf = *bl->rp; - if (bl->rp == bl->wp) { - spin_unlock_irqrestore(&bl->read_lock, flags); - return NULL; - } - if (++bl->rp >= bl->end) bl->rp = bl->bufs; - spin_unlock_irqrestore(&bl->read_lock, flags); - - return buf; -} - -int DRM(freelist_create)(drm_freelist_t *bl, int count) -{ - atomic_set(&bl->count, 0); - bl->next = NULL; - init_waitqueue_head(&bl->waiting); - bl->low_mark = 0; - bl->high_mark = 0; - atomic_set(&bl->wfh, 0); - spin_lock_init(&bl->lock); - ++bl->initialized; - return 0; -} - -int DRM(freelist_destroy)(drm_freelist_t *bl) -{ - atomic_set(&bl->count, 0); - bl->next = NULL; - return 0; -} - -int DRM(freelist_put)(drm_device_t *dev, drm_freelist_t *bl, drm_buf_t *buf) -{ - drm_device_dma_t *dma = dev->dma; - - if (!dma) { - DRM_ERROR("No DMA support\n"); - return 1; - } - - if (buf->waiting || buf->pending || buf->list == DRM_LIST_FREE) { - DRM_ERROR("Freed buffer %d: w%d, p%d, l%d\n", - buf->idx, buf->waiting, buf->pending, buf->list); - } - if (!bl) return 1; - buf->list = DRM_LIST_FREE; - - spin_lock(&bl->lock); - buf->next = bl->next; - bl->next = buf; - spin_unlock(&bl->lock); - - atomic_inc(&bl->count); - if (atomic_read(&bl->count) > dma->buf_count) { - DRM_ERROR("%d of %d buffers free after addition of %d\n", - atomic_read(&bl->count), dma->buf_count, buf->idx); - return 1; - } - /* Check for high water mark */ - if (atomic_read(&bl->wfh) && atomic_read(&bl->count)>=bl->high_mark) { - atomic_set(&bl->wfh, 0); - wake_up_interruptible(&bl->waiting); - } - return 0; -} - -static drm_buf_t *DRM(freelist_try)(drm_freelist_t *bl) -{ - drm_buf_t *buf; - - if (!bl) return NULL; - - /* Get buffer */ - spin_lock(&bl->lock); - if (!bl->next) { - spin_unlock(&bl->lock); - return NULL; - } - buf = bl->next; - bl->next = bl->next->next; - spin_unlock(&bl->lock); - - atomic_dec(&bl->count); - buf->next = NULL; - buf->list = DRM_LIST_NONE; - if (buf->waiting || buf->pending) { - DRM_ERROR("Free buffer %d: w%d, p%d, l%d\n", - buf->idx, buf->waiting, buf->pending, buf->list); - } - - return buf; -} - -drm_buf_t *DRM(freelist_get)(drm_freelist_t *bl, int block) -{ - drm_buf_t *buf = NULL; - DECLARE_WAITQUEUE(entry, current); - - if (!bl || !bl->initialized) return NULL; - - /* Check for low water mark */ - if (atomic_read(&bl->count) <= bl->low_mark) /* Became low */ - atomic_set(&bl->wfh, 1); - if (atomic_read(&bl->wfh)) { - if (block) { - add_wait_queue(&bl->waiting, &entry); - for (;;) { - current->state = TASK_INTERRUPTIBLE; - if (!atomic_read(&bl->wfh) - && (buf = DRM(freelist_try)(bl))) break; - schedule(); - if (signal_pending(current)) break; - } - current->state = TASK_RUNNING; - remove_wait_queue(&bl->waiting, &entry); - } - return buf; - } - - return DRM(freelist_try)(bl); -} - diff --git a/drivers/char/drm/gamma_lock.h b/drivers/char/drm/gamma_lock.h deleted file mode 100644 index ddec67e4ed16..000000000000 --- a/drivers/char/drm/gamma_lock.h +++ /dev/null @@ -1,140 +0,0 @@ -/* lock.c -- IOCTLs for locking -*- linux-c -*- - * Created: Tue Feb 2 08:37:54 1999 by faith@valinux.com - * - * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas. - * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California. - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * - * Authors: - * Rickard E. (Rik) Faith <faith@valinux.com> - * Gareth Hughes <gareth@valinux.com> - */ - - -/* Gamma-specific code extracted from drm_lock.h: - */ -static int DRM(flush_queue)(drm_device_t *dev, int context) -{ - DECLARE_WAITQUEUE(entry, current); - int ret = 0; - drm_queue_t *q = dev->queuelist[context]; - - DRM_DEBUG("\n"); - - atomic_inc(&q->use_count); - if (atomic_read(&q->use_count) > 1) { - atomic_inc(&q->block_write); - add_wait_queue(&q->flush_queue, &entry); - atomic_inc(&q->block_count); - for (;;) { - current->state = TASK_INTERRUPTIBLE; - if (!DRM_BUFCOUNT(&q->waitlist)) break; - schedule(); - if (signal_pending(current)) { - ret = -EINTR; /* Can't restart */ - break; - } - } - atomic_dec(&q->block_count); - current->state = TASK_RUNNING; - remove_wait_queue(&q->flush_queue, &entry); - } - atomic_dec(&q->use_count); - - /* NOTE: block_write is still incremented! - Use drm_flush_unlock_queue to decrement. */ - return ret; -} - -static int DRM(flush_unblock_queue)(drm_device_t *dev, int context) -{ - drm_queue_t *q = dev->queuelist[context]; - - DRM_DEBUG("\n"); - - atomic_inc(&q->use_count); - if (atomic_read(&q->use_count) > 1) { - if (atomic_read(&q->block_write)) { - atomic_dec(&q->block_write); - wake_up_interruptible(&q->write_queue); - } - } - atomic_dec(&q->use_count); - return 0; -} - -int DRM(flush_block_and_flush)(drm_device_t *dev, int context, - drm_lock_flags_t flags) -{ - int ret = 0; - int i; - - DRM_DEBUG("\n"); - - if (flags & _DRM_LOCK_FLUSH) { - ret = DRM(flush_queue)(dev, DRM_KERNEL_CONTEXT); - if (!ret) ret = DRM(flush_queue)(dev, context); - } - if (flags & _DRM_LOCK_FLUSH_ALL) { - for (i = 0; !ret && i < dev->queue_count; i++) { - ret = DRM(flush_queue)(dev, i); - } - } - return ret; -} - -int DRM(flush_unblock)(drm_device_t *dev, int context, drm_lock_flags_t flags) -{ - int ret = 0; - int i; - - DRM_DEBUG("\n"); - - if (flags & _DRM_LOCK_FLUSH) { - ret = DRM(flush_unblock_queue)(dev, DRM_KERNEL_CONTEXT); - if (!ret) ret = DRM(flush_unblock_queue)(dev, context); - } - if (flags & _DRM_LOCK_FLUSH_ALL) { - for (i = 0; !ret && i < dev->queue_count; i++) { - ret = DRM(flush_unblock_queue)(dev, i); - } - } - - return ret; -} - -int DRM(finish)(struct inode *inode, struct file *filp, unsigned int cmd, - unsigned long arg) -{ - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->dev; - int ret = 0; - drm_lock_t lock; - - DRM_DEBUG("\n"); - - if (copy_from_user(&lock, (drm_lock_t __user *)arg, sizeof(lock))) - return -EFAULT; - ret = DRM(flush_block_and_flush)(dev, lock.context, lock.flags); - DRM(flush_unblock)(dev, lock.context, lock.flags); - return ret; -} diff --git a/drivers/char/drm/gamma_old_dma.h b/drivers/char/drm/gamma_old_dma.h deleted file mode 100644 index abdd454aab9f..000000000000 --- a/drivers/char/drm/gamma_old_dma.h +++ /dev/null @@ -1,313 +0,0 @@ -/* drm_dma.c -- DMA IOCTL and function support -*- linux-c -*- - * Created: Fri Mar 19 14:30:16 1999 by faith@valinux.com - * - * Copyright 1999, 2000 Precision Insight, Inc., Cedar Park, Texas. - * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California. - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * - * Authors: - * Rickard E. (Rik) Faith <faith@valinux.com> - * Gareth Hughes <gareth@valinux.com> - */ - - -/* Gamma-specific code pulled from drm_dma.h: - */ - -void DRM(clear_next_buffer)(drm_device_t *dev) -{ - drm_device_dma_t *dma = dev->dma; - - dma->next_buffer = NULL; - if (dma->next_queue && !DRM_BUFCOUNT(&dma->next_queue->waitlist)) { - wake_up_interruptible(&dma->next_queue->flush_queue); - } - dma->next_queue = NULL; -} - -int DRM(select_queue)(drm_device_t *dev, void (*wrapper)(unsigned long)) -{ - int i; - int candidate = -1; - int j = jiffies; - - if (!dev) { - DRM_ERROR("No device\n"); - return -1; - } - if (!dev->queuelist || !dev->queuelist[DRM_KERNEL_CONTEXT]) { - /* This only happens between the time the - interrupt is initialized and the time - the queues are initialized. */ - return -1; - } - - /* Doing "while locked" DMA? */ - if (DRM_WAITCOUNT(dev, DRM_KERNEL_CONTEXT)) { - return DRM_KERNEL_CONTEXT; - } - - /* If there are buffers on the last_context - queue, and we have not been executing - this context very long, continue to - execute this context. */ - if (dev->last_switch <= j - && dev->last_switch + DRM_TIME_SLICE > j - && DRM_WAITCOUNT(dev, dev->last_context)) { - return dev->last_context; - } - - /* Otherwise, find a candidate */ - for (i = dev->last_checked + 1; i < dev->queue_count; i++) { - if (DRM_WAITCOUNT(dev, i)) { - candidate = dev->last_checked = i; - break; - } - } - - if (candidate < 0) { - for (i = 0; i < dev->queue_count; i++) { - if (DRM_WAITCOUNT(dev, i)) { - candidate = dev->last_checked = i; - break; - } - } - } - - if (wrapper - && candidate >= 0 - && candidate != dev->last_context - && dev->last_switch <= j - && dev->last_switch + DRM_TIME_SLICE > j) { - if (dev->timer.expires != dev->last_switch + DRM_TIME_SLICE) { - del_timer(&dev->timer); - dev->timer.function = wrapper; - dev->timer.data = (unsigned long)dev; - dev->timer.expires = dev->last_switch+DRM_TIME_SLICE; - add_timer(&dev->timer); - } - return -1; - } - - return candidate; -} - - -int DRM(dma_enqueue)(struct file *filp, drm_dma_t *d) -{ - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->dev; - int i; - drm_queue_t *q; - drm_buf_t *buf; - int idx; - int while_locked = 0; - drm_device_dma_t *dma = dev->dma; - int *ind; - int err; - DECLARE_WAITQUEUE(entry, current); - - DRM_DEBUG("%d\n", d->send_count); - - if (d->flags & _DRM_DMA_WHILE_LOCKED) { - int context = dev->lock.hw_lock->lock; - - if (!_DRM_LOCK_IS_HELD(context)) { - DRM_ERROR("No lock held during \"while locked\"" - " request\n"); - return -EINVAL; - } - if (d->context != _DRM_LOCKING_CONTEXT(context) - && _DRM_LOCKING_CONTEXT(context) != DRM_KERNEL_CONTEXT) { - DRM_ERROR("Lock held by %d while %d makes" - " \"while locked\" request\n", - _DRM_LOCKING_CONTEXT(context), - d->context); - return -EINVAL; - } - q = dev->queuelist[DRM_KERNEL_CONTEXT]; - while_locked = 1; - } else { - q = dev->queuelist[d->context]; - } - - - atomic_inc(&q->use_count); - if (atomic_read(&q->block_write)) { - add_wait_queue(&q->write_queue, &entry); - atomic_inc(&q->block_count); - for (;;) { - current->state = TASK_INTERRUPTIBLE; - if (!atomic_read(&q->block_write)) break; - schedule(); - if (signal_pending(current)) { - atomic_dec(&q->use_count); - remove_wait_queue(&q->write_queue, &entry); - return -EINTR; - } - } - atomic_dec(&q->block_count); - current->state = TASK_RUNNING; - remove_wait_queue(&q->write_queue, &entry); - } - - ind = DRM(alloc)(d->send_count * sizeof(int), DRM_MEM_DRIVER); - if (!ind) - return -ENOMEM; - - if (copy_from_user(ind, d->send_indices, d->send_count * sizeof(int))) { - err = -EFAULT; - goto out; - } - - err = -EINVAL; - for (i = 0; i < d->send_count; i++) { - idx = ind[i]; - if (idx < 0 || idx >= dma->buf_count) { - DRM_ERROR("Index %d (of %d max)\n", - ind[i], dma->buf_count - 1); - goto out; - } - buf = dma->buflist[ idx ]; - if (buf->filp != filp) { - DRM_ERROR("Process %d using buffer not owned\n", - current->pid); - goto out; - } - if (buf->list != DRM_LIST_NONE) { - DRM_ERROR("Process %d using buffer %d on list %d\n", - current->pid, buf->idx, buf->list); - goto out; - } - buf->used = ind[i]; - buf->while_locked = while_locked; - buf->context = d->context; - if (!buf->used) { - DRM_ERROR("Queueing 0 length buffer\n"); - } - if (buf->pending) { - DRM_ERROR("Queueing pending buffer:" - " buffer %d, offset %d\n", - ind[i], i); - goto out; - } - if (buf->waiting) { - DRM_ERROR("Queueing waiting buffer:" - " buffer %d, offset %d\n", - ind[i], i); - goto out; - } - buf->waiting = 1; - if (atomic_read(&q->use_count) == 1 - || atomic_read(&q->finalization)) { - DRM(free_buffer)(dev, buf); - } else { - DRM(waitlist_put)(&q->waitlist, buf); - atomic_inc(&q->total_queued); - } - } - atomic_dec(&q->use_count); - - return 0; - -out: - DRM(free)(ind, d->send_count * sizeof(int), DRM_MEM_DRIVER); - atomic_dec(&q->use_count); - return err; -} - -static int DRM(dma_get_buffers_of_order)(struct file *filp, drm_dma_t *d, - int order) -{ - drm_file_t *priv = filp->private_data; - drm_device_t *dev = priv->dev; - int i; - drm_buf_t *buf; - drm_device_dma_t *dma = dev->dma; - - for (i = d->granted_count; i < d->request_count; i++) { - buf = DRM(freelist_get)(&dma->bufs[order].freelist, - d->flags & _DRM_DMA_WAIT); - if (!buf) break; - if (buf->pending || buf->waiting) { - DRM_ERROR("Free buffer %d in use: filp %p (w%d, p%d)\n", - buf->idx, - buf->filp, - buf->waiting, - buf->pending); - } - buf->filp = filp; - if (copy_to_user(&d->request_indices[i], - &buf->idx, - sizeof(buf->idx))) - return -EFAULT; - - if (copy_to_user(&d->request_sizes[i], - &buf->total, - sizeof(buf->total))) - return -EFAULT; - - ++d->granted_count; - } - return 0; -} - - -int DRM(dma_get_buffers)(struct file *filp, drm_dma_t *dma) -{ - int order; - int retcode = 0; - int tmp_order; - - order = DRM(order)(dma->request_size); - - dma->granted_count = 0; - retcode = DRM(dma_get_buffers_of_order)(filp, dma, order); - - if (dma->granted_count < dma->request_count - && (dma->flags & _DRM_DMA_SMALLER_OK)) { - for (tmp_order = order - 1; - !retcode - && dma->granted_count < dma->request_count - && tmp_order >= DRM_MIN_ORDER; - --tmp_order) { - - retcode = DRM(dma_get_buffers_of_order)(filp, dma, - tmp_order); - } - } - - if (dma->granted_count < dma->request_count - && (dma->flags & _DRM_DMA_LARGER_OK)) { - for (tmp_order = order + 1; - !retcode - && dma->granted_count < dma->request_count - && tmp_order <= DRM_MAX_ORDER; - ++tmp_order) { - - retcode = DRM(dma_get_buffers_of_order)(filp, dma, - tmp_order); - } - } - return 0; -} - diff --git a/drivers/char/drm/i810_dma.c b/drivers/char/drm/i810_dma.c index 18e0b7622893..2f1659b96fd1 100644 --- a/drivers/char/drm/i810_dma.c +++ b/drivers/char/drm/i810_dma.c @@ -45,11 +45,6 @@ #define I810_BUF_UNMAPPED 0 #define I810_BUF_MAPPED 1 -#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,2) -#define down_write down -#define up_write up -#endif - static drm_buf_t *i810_freelist_get(drm_device_t *dev) { drm_device_dma_t *dma = dev->dma; @@ -351,6 +346,7 @@ static int i810_dma_initialize(drm_device_t *dev, DRM_ERROR("can not find mmio map!\n"); return -EINVAL; } + dev->agp_buffer_token = init->buffers_offset; dev->agp_buffer_map = drm_core_findmap(dev, init->buffers_offset); if (!dev->agp_buffer_map) { dev->dev_private = (void *)dev_priv; @@ -1383,3 +1379,19 @@ drm_ioctl_desc_t i810_ioctls[] = { }; int i810_max_ioctl = DRM_ARRAY_SIZE(i810_ioctls); + +/** + * Determine if the device really is AGP or not. + * + * All Intel graphics chipsets are treated as AGP, even if they are really + * PCI-e. + * + * \param dev The device to be tested. + * + * \returns + * A value of 1 is always retured to indictate every i810 is AGP. + */ +int i810_driver_device_is_agp(drm_device_t * dev) +{ + return 1; +} diff --git a/drivers/char/drm/i810_drv.c b/drivers/char/drm/i810_drv.c index ff51b3259af9..00609329d578 100644 --- a/drivers/char/drm/i810_drv.c +++ b/drivers/char/drm/i810_drv.c @@ -84,6 +84,7 @@ static struct drm_driver driver = { .dev_priv_size = sizeof(drm_i810_buf_priv_t), .pretakedown = i810_driver_pretakedown, .prerelease = i810_driver_prerelease, + .device_is_agp = i810_driver_device_is_agp, .release = i810_driver_release, .dma_quiescent = i810_driver_dma_quiescent, .reclaim_buffers = i810_reclaim_buffers, diff --git a/drivers/char/drm/i810_drv.h b/drivers/char/drm/i810_drv.h index 1b40538d1725..62ee4f58c59a 100644 --- a/drivers/char/drm/i810_drv.h +++ b/drivers/char/drm/i810_drv.h @@ -120,6 +120,7 @@ extern int i810_driver_dma_quiescent(drm_device_t *dev); extern void i810_driver_release(drm_device_t *dev, struct file *filp); extern void i810_driver_pretakedown(drm_device_t *dev); extern void i810_driver_prerelease(drm_device_t *dev, DRMFILE filp); +extern int i810_driver_device_is_agp(drm_device_t * dev); #define I810_BASE(reg) ((unsigned long) \ dev_priv->mmio_map->handle) diff --git a/drivers/char/drm/i830_dma.c b/drivers/char/drm/i830_dma.c index dc7733035864..6f89d5796ef3 100644 --- a/drivers/char/drm/i830_dma.c +++ b/drivers/char/drm/i830_dma.c @@ -47,11 +47,6 @@ #define I830_BUF_UNMAPPED 0 #define I830_BUF_MAPPED 1 -#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,2) -#define down_write down -#define up_write up -#endif - static drm_buf_t *i830_freelist_get(drm_device_t *dev) { drm_device_dma_t *dma = dev->dma; @@ -358,6 +353,7 @@ static int i830_dma_initialize(drm_device_t *dev, DRM_ERROR("can not find mmio map!\n"); return -EINVAL; } + dev->agp_buffer_token = init->buffers_offset; dev->agp_buffer_map = drm_core_findmap(dev, init->buffers_offset); if(!dev->agp_buffer_map) { dev->dev_private = (void *)dev_priv; @@ -1586,3 +1582,19 @@ drm_ioctl_desc_t i830_ioctls[] = { }; int i830_max_ioctl = DRM_ARRAY_SIZE(i830_ioctls); + +/** + * Determine if the device really is AGP or not. + * + * All Intel graphics chipsets are treated as AGP, even if they are really + * PCI-e. + * + * \param dev The device to be tested. + * + * \returns + * A value of 1 is always retured to indictate every i8xx is AGP. + */ +int i830_driver_device_is_agp(drm_device_t * dev) +{ + return 1; +} diff --git a/drivers/char/drm/i830_drv.c b/drivers/char/drm/i830_drv.c index bc36be76b8b2..0da9cd19919e 100644 --- a/drivers/char/drm/i830_drv.c +++ b/drivers/char/drm/i830_drv.c @@ -88,6 +88,7 @@ static struct drm_driver driver = { .dev_priv_size = sizeof(drm_i830_buf_priv_t), .pretakedown = i830_driver_pretakedown, .prerelease = i830_driver_prerelease, + .device_is_agp = i830_driver_device_is_agp, .release = i830_driver_release, .dma_quiescent = i830_driver_dma_quiescent, .reclaim_buffers = i830_reclaim_buffers, diff --git a/drivers/char/drm/i830_drv.h b/drivers/char/drm/i830_drv.h index df7746131dea..63f96a8b6a4a 100644 --- a/drivers/char/drm/i830_drv.h +++ b/drivers/char/drm/i830_drv.h @@ -137,6 +137,7 @@ extern void i830_driver_pretakedown(drm_device_t *dev); extern void i830_driver_release(drm_device_t *dev, struct file *filp); extern int i830_driver_dma_quiescent(drm_device_t *dev); extern void i830_driver_prerelease(drm_device_t *dev, DRMFILE filp); +extern int i830_driver_device_is_agp(drm_device_t * dev); #define I830_BASE(reg) ((unsigned long) \ dev_priv->mmio_map->handle) diff --git a/drivers/char/drm/i915_dma.c b/drivers/char/drm/i915_dma.c index acf9e52a9507..34f552f90c4a 100644 --- a/drivers/char/drm/i915_dma.c +++ b/drivers/char/drm/i915_dma.c @@ -95,9 +95,8 @@ static int i915_dma_cleanup(drm_device_t * dev) drm_core_ioremapfree( &dev_priv->ring.map, dev); } - if (dev_priv->hw_status_page) { - drm_pci_free(dev, PAGE_SIZE, dev_priv->hw_status_page, - dev_priv->dma_status_page); + if (dev_priv->status_page_dmah) { + drm_pci_free(dev, dev_priv->status_page_dmah); /* Need to rewrite hardware status page */ I915_WRITE(0x02080, 0x1ffff000); } @@ -174,16 +173,18 @@ static int i915_initialize(drm_device_t * dev, dev_priv->allow_batchbuffer = 1; /* Program Hardware Status Page */ - dev_priv->hw_status_page = drm_pci_alloc(dev, PAGE_SIZE, PAGE_SIZE, - 0xffffffff, - &dev_priv->dma_status_page); + dev_priv->status_page_dmah = drm_pci_alloc(dev, PAGE_SIZE, PAGE_SIZE, + 0xffffffff); - if (!dev_priv->hw_status_page) { + if (!dev_priv->status_page_dmah) { dev->dev_private = (void *)dev_priv; i915_dma_cleanup(dev); DRM_ERROR("Can not allocate hardware status page\n"); return DRM_ERR(ENOMEM); } + dev_priv->hw_status_page = dev_priv->status_page_dmah->vaddr; + dev_priv->dma_status_page = dev_priv->status_page_dmah->busaddr; + memset(dev_priv->hw_status_page, 0, PAGE_SIZE); DRM_DEBUG("hw status page @ %p\n", dev_priv->hw_status_page); @@ -731,3 +732,19 @@ drm_ioctl_desc_t i915_ioctls[] = { }; int i915_max_ioctl = DRM_ARRAY_SIZE(i915_ioctls); + +/** + * Determine if the device really is AGP or not. + * + * All Intel graphics chipsets are treated as AGP, even if they are really + * PCI-e. + * + * \param dev The device to be tested. + * + * \returns + * A value of 1 is always retured to indictate every i9x5 is AGP. + */ +int i915_driver_device_is_agp(drm_device_t * dev) +{ + return 1; +} diff --git a/drivers/char/drm/i915_drv.c b/drivers/char/drm/i915_drv.c index 1f59d3fc79bc..106b9ec02213 100644 --- a/drivers/char/drm/i915_drv.c +++ b/drivers/char/drm/i915_drv.c @@ -79,6 +79,7 @@ static struct drm_driver driver = { DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED, .pretakedown = i915_driver_pretakedown, .prerelease = i915_driver_prerelease, + .device_is_agp = i915_driver_device_is_agp, .irq_preinstall = i915_driver_irq_preinstall, .irq_postinstall = i915_driver_irq_postinstall, .irq_uninstall = i915_driver_irq_uninstall, diff --git a/drivers/char/drm/i915_drv.h b/drivers/char/drm/i915_drv.h index 9c37d2367dd5..70ed4e68eac8 100644 --- a/drivers/char/drm/i915_drv.h +++ b/drivers/char/drm/i915_drv.h @@ -79,9 +79,10 @@ typedef struct drm_i915_private { drm_i915_sarea_t *sarea_priv; drm_i915_ring_buffer_t ring; + drm_dma_handle_t *status_page_dmah; void *hw_status_page; - unsigned long counter; dma_addr_t dma_status_page; + unsigned long counter; int back_offset; int front_offset; @@ -102,6 +103,7 @@ typedef struct drm_i915_private { extern void i915_kernel_lost_context(drm_device_t * dev); extern void i915_driver_pretakedown(drm_device_t *dev); extern void i915_driver_prerelease(drm_device_t *dev, DRMFILE filp); +extern int i915_driver_device_is_agp(drm_device_t *dev); /* i915_irq.c */ extern int i915_irq_emit(DRM_IOCTL_ARGS); diff --git a/drivers/char/drm/mga_dma.c b/drivers/char/drm/mga_dma.c index 832eaf8a5068..567b425b784f 100644 --- a/drivers/char/drm/mga_dma.c +++ b/drivers/char/drm/mga_dma.c @@ -23,18 +23,21 @@ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER * DEALINGS IN THE SOFTWARE. - * - * Authors: - * Rickard E. (Rik) Faith <faith@valinux.com> - * Jeff Hartmann <jhartmann@valinux.com> - * Keith Whitwell <keith@tungstengraphics.com> - * - * Rewritten by: - * Gareth Hughes <gareth@valinux.com> + */ + +/** + * \file mga_dma.c + * DMA support for MGA G200 / G400. + * + * \author Rickard E. (Rik) Faith <faith@valinux.com> + * \author Jeff Hartmann <jhartmann@valinux.com> + * \author Keith Whitwell <keith@tungstengraphics.com> + * \author Gareth Hughes <gareth@valinux.com> */ #include "drmP.h" #include "drm.h" +#include "drm_sarea.h" #include "mga_drm.h" #include "mga_drv.h" @@ -148,7 +151,7 @@ void mga_do_dma_flush( drm_mga_private_t *dev_priv ) DRM_DEBUG( " space = 0x%06x\n", primary->space ); mga_flush_write_combine(); - MGA_WRITE( MGA_PRIMEND, tail | MGA_PAGPXFER ); + MGA_WRITE(MGA_PRIMEND, tail | dev_priv->dma_access); DRM_DEBUG( "done.\n" ); } @@ -190,7 +193,7 @@ void mga_do_dma_wrap_start( drm_mga_private_t *dev_priv ) DRM_DEBUG( " space = 0x%06x\n", primary->space ); mga_flush_write_combine(); - MGA_WRITE( MGA_PRIMEND, tail | MGA_PAGPXFER ); + MGA_WRITE(MGA_PRIMEND, tail | dev_priv->dma_access); set_bit( 0, &primary->wrapped ); DRM_DEBUG( "done.\n" ); @@ -396,23 +399,383 @@ int mga_freelist_put( drm_device_t *dev, drm_buf_t *buf ) * DMA initialization, cleanup */ + +int mga_driver_preinit(drm_device_t *dev, unsigned long flags) +{ + drm_mga_private_t * dev_priv; + + dev_priv = drm_alloc(sizeof(drm_mga_private_t), DRM_MEM_DRIVER); + if (!dev_priv) + return DRM_ERR(ENOMEM); + + dev->dev_private = (void *)dev_priv; + memset(dev_priv, 0, sizeof(drm_mga_private_t)); + + dev_priv->usec_timeout = MGA_DEFAULT_USEC_TIMEOUT; + dev_priv->chipset = flags; + + return 0; +} + +/** + * Bootstrap the driver for AGP DMA. + * + * \todo + * Investigate whether there is any benifit to storing the WARP microcode in + * AGP memory. If not, the microcode may as well always be put in PCI + * memory. + * + * \todo + * This routine needs to set dma_bs->agp_mode to the mode actually configured + * in the hardware. Looking just at the Linux AGP driver code, I don't see + * an easy way to determine this. + * + * \sa mga_do_dma_bootstrap, mga_do_pci_dma_bootstrap + */ +static int mga_do_agp_dma_bootstrap(drm_device_t * dev, + drm_mga_dma_bootstrap_t * dma_bs) +{ + drm_mga_private_t * const dev_priv = (drm_mga_private_t *) dev->dev_private; + const unsigned int warp_size = mga_warp_microcode_size(dev_priv); + int err; + unsigned offset; + const unsigned secondary_size = dma_bs->secondary_bin_count + * dma_bs->secondary_bin_size; + const unsigned agp_size = (dma_bs->agp_size << 20); + drm_buf_desc_t req; + drm_agp_mode_t mode; + drm_agp_info_t info; + + + /* Acquire AGP. */ + err = drm_agp_acquire(dev); + if (err) { + DRM_ERROR("Unable to acquire AGP\n"); + return err; + } + + err = drm_agp_info(dev, &info); + if (err) { + DRM_ERROR("Unable to get AGP info\n"); + return err; + } + + mode.mode = (info.mode & ~0x07) | dma_bs->agp_mode; + err = drm_agp_enable(dev, mode); + if (err) { + DRM_ERROR("Unable to enable AGP (mode = 0x%lx)\n", mode.mode); + return err; + } + + + /* In addition to the usual AGP mode configuration, the G200 AGP cards + * need to have the AGP mode "manually" set. + */ + + if (dev_priv->chipset == MGA_CARD_TYPE_G200) { + if (mode.mode & 0x02) { + MGA_WRITE(MGA_AGP_PLL, MGA_AGP2XPLL_ENABLE); + } + else { + MGA_WRITE(MGA_AGP_PLL, MGA_AGP2XPLL_DISABLE); + } + } + + + /* Allocate and bind AGP memory. */ + dev_priv->agp_pages = agp_size / PAGE_SIZE; + dev_priv->agp_mem = drm_alloc_agp( dev, dev_priv->agp_pages, 0 ); + if (dev_priv->agp_mem == NULL) { + dev_priv->agp_pages = 0; + DRM_ERROR("Unable to allocate %uMB AGP memory\n", + dma_bs->agp_size); + return DRM_ERR(ENOMEM); + } + + err = drm_bind_agp( dev_priv->agp_mem, 0 ); + if (err) { + DRM_ERROR("Unable to bind AGP memory\n"); + return err; + } + + offset = 0; + err = drm_addmap( dev, offset, warp_size, + _DRM_AGP, _DRM_READ_ONLY, & dev_priv->warp ); + if (err) { + DRM_ERROR("Unable to map WARP microcode\n"); + return err; + } + + offset += warp_size; + err = drm_addmap( dev, offset, dma_bs->primary_size, + _DRM_AGP, _DRM_READ_ONLY, & dev_priv->primary ); + if (err) { + DRM_ERROR("Unable to map primary DMA region\n"); + return err; + } + + offset += dma_bs->primary_size; + err = drm_addmap( dev, offset, secondary_size, + _DRM_AGP, 0, & dev->agp_buffer_map ); + if (err) { + DRM_ERROR("Unable to map secondary DMA region\n"); + return err; + } + + (void) memset( &req, 0, sizeof(req) ); + req.count = dma_bs->secondary_bin_count; + req.size = dma_bs->secondary_bin_size; + req.flags = _DRM_AGP_BUFFER; + req.agp_start = offset; + + err = drm_addbufs_agp( dev, & req ); + if (err) { + DRM_ERROR("Unable to add secondary DMA buffers\n"); + return err; + } + + offset += secondary_size; + err = drm_addmap( dev, offset, agp_size - offset, + _DRM_AGP, 0, & dev_priv->agp_textures ); + if (err) { + DRM_ERROR("Unable to map AGP texture region\n"); + return err; + } + + drm_core_ioremap(dev_priv->warp, dev); + drm_core_ioremap(dev_priv->primary, dev); + drm_core_ioremap(dev->agp_buffer_map, dev); + + if (!dev_priv->warp->handle || + !dev_priv->primary->handle || !dev->agp_buffer_map->handle) { + DRM_ERROR("failed to ioremap agp regions! (%p, %p, %p)\n", + dev_priv->warp->handle, dev_priv->primary->handle, + dev->agp_buffer_map->handle); + return DRM_ERR(ENOMEM); + } + + dev_priv->dma_access = MGA_PAGPXFER; + dev_priv->wagp_enable = MGA_WAGP_ENABLE; + + DRM_INFO("Initialized card for AGP DMA.\n"); + return 0; +} + +/** + * Bootstrap the driver for PCI DMA. + * + * \todo + * The algorithm for decreasing the size of the primary DMA buffer could be + * better. The size should be rounded up to the nearest page size, then + * decrease the request size by a single page each pass through the loop. + * + * \todo + * Determine whether the maximum address passed to drm_pci_alloc is correct. + * The same goes for drm_addbufs_pci. + * + * \sa mga_do_dma_bootstrap, mga_do_agp_dma_bootstrap + */ +static int mga_do_pci_dma_bootstrap(drm_device_t * dev, + drm_mga_dma_bootstrap_t * dma_bs) +{ + drm_mga_private_t * const dev_priv = (drm_mga_private_t *) dev->dev_private; + const unsigned int warp_size = mga_warp_microcode_size(dev_priv); + unsigned int primary_size; + unsigned int bin_count; + int err; + drm_buf_desc_t req; + + + if (dev->dma == NULL) { + DRM_ERROR("dev->dma is NULL\n"); + return DRM_ERR(EFAULT); + } + + /* The proper alignment is 0x100 for this mapping */ + err = drm_addmap(dev, 0, warp_size, _DRM_CONSISTENT, + _DRM_READ_ONLY, &dev_priv->warp); + if (err != 0) { + DRM_ERROR("Unable to create mapping for WARP microcode\n"); + return err; + } + + /* Other than the bottom two bits being used to encode other + * information, there don't appear to be any restrictions on the + * alignment of the primary or secondary DMA buffers. + */ + + for ( primary_size = dma_bs->primary_size + ; primary_size != 0 + ; primary_size >>= 1 ) { + /* The proper alignment for this mapping is 0x04 */ + err = drm_addmap(dev, 0, primary_size, _DRM_CONSISTENT, + _DRM_READ_ONLY, &dev_priv->primary); + if (!err) + break; + } + + if (err != 0) { + DRM_ERROR("Unable to allocate primary DMA region\n"); + return DRM_ERR(ENOMEM); + } + + if (dev_priv->primary->size != dma_bs->primary_size) { + DRM_INFO("Primary DMA buffer size reduced from %u to %u.\n", + dma_bs->primary_size, + (unsigned) dev_priv->primary->size); + dma_bs->primary_size = dev_priv->primary->size; + } + + for ( bin_count = dma_bs->secondary_bin_count + ; bin_count > 0 + ; bin_count-- ) { + (void) memset( &req, 0, sizeof(req) ); + req.count = bin_count; + req.size = dma_bs->secondary_bin_size; + + err = drm_addbufs_pci( dev, & req ); + if (!err) { + break; + } + } + + if (bin_count == 0) { + DRM_ERROR("Unable to add secondary DMA buffers\n"); + return err; + } + + if (bin_count != dma_bs->secondary_bin_count) { + DRM_INFO("Secondary PCI DMA buffer bin count reduced from %u " + "to %u.\n", dma_bs->secondary_bin_count, bin_count); + + dma_bs->secondary_bin_count = bin_count; + } + + dev_priv->dma_access = 0; + dev_priv->wagp_enable = 0; + + dma_bs->agp_mode = 0; + + DRM_INFO("Initialized card for PCI DMA.\n"); + return 0; +} + + +static int mga_do_dma_bootstrap(drm_device_t * dev, + drm_mga_dma_bootstrap_t * dma_bs) +{ + const int is_agp = (dma_bs->agp_mode != 0) && drm_device_is_agp(dev); + int err; + drm_mga_private_t * const dev_priv = + (drm_mga_private_t *) dev->dev_private; + + + dev_priv->used_new_dma_init = 1; + + /* The first steps are the same for both PCI and AGP based DMA. Map + * the cards MMIO registers and map a status page. + */ + err = drm_addmap( dev, dev_priv->mmio_base, dev_priv->mmio_size, + _DRM_REGISTERS, _DRM_READ_ONLY, & dev_priv->mmio ); + if (err) { + DRM_ERROR("Unable to map MMIO region\n"); + return err; + } + + + err = drm_addmap( dev, 0, SAREA_MAX, _DRM_SHM, + _DRM_READ_ONLY | _DRM_LOCKED | _DRM_KERNEL, + & dev_priv->status ); + if (err) { + DRM_ERROR("Unable to map status region\n"); + return err; + } + + + /* The DMA initialization procedure is slightly different for PCI and + * AGP cards. AGP cards just allocate a large block of AGP memory and + * carve off portions of it for internal uses. The remaining memory + * is returned to user-mode to be used for AGP textures. + */ + + if (is_agp) { + err = mga_do_agp_dma_bootstrap(dev, dma_bs); + } + + /* If we attempted to initialize the card for AGP DMA but failed, + * clean-up any mess that may have been created. + */ + + if (err) { + mga_do_cleanup_dma(dev); + } + + + /* Not only do we want to try and initialized PCI cards for PCI DMA, + * but we also try to initialized AGP cards that could not be + * initialized for AGP DMA. This covers the case where we have an AGP + * card in a system with an unsupported AGP chipset. In that case the + * card will be detected as AGP, but we won't be able to allocate any + * AGP memory, etc. + */ + + if (!is_agp || err) { + err = mga_do_pci_dma_bootstrap(dev, dma_bs); + } + + + return err; +} + +int mga_dma_bootstrap(DRM_IOCTL_ARGS) +{ + DRM_DEVICE; + drm_mga_dma_bootstrap_t bootstrap; + int err; + + + DRM_COPY_FROM_USER_IOCTL(bootstrap, + (drm_mga_dma_bootstrap_t __user *) data, + sizeof(bootstrap)); + + err = mga_do_dma_bootstrap(dev, & bootstrap); + if (! err) { + static const int modes[] = { 0, 1, 2, 2, 4, 4, 4, 4 }; + const drm_mga_private_t * const dev_priv = + (drm_mga_private_t *) dev->dev_private; + + if (dev_priv->agp_textures != NULL) { + bootstrap.texture_handle = dev_priv->agp_textures->offset; + bootstrap.texture_size = dev_priv->agp_textures->size; + } + else { + bootstrap.texture_handle = 0; + bootstrap.texture_size = 0; + } + + bootstrap.agp_mode = modes[ bootstrap.agp_mode & 0x07 ]; + if (DRM_COPY_TO_USER( (void __user *) data, & bootstrap, + sizeof(bootstrap))) { + err = DRM_ERR(EFAULT); + } + } + else { + mga_do_cleanup_dma(dev); + } + + return err; +} + static int mga_do_init_dma( drm_device_t *dev, drm_mga_init_t *init ) { drm_mga_private_t *dev_priv; int ret; DRM_DEBUG( "\n" ); - dev_priv = drm_alloc( sizeof(drm_mga_private_t), DRM_MEM_DRIVER ); - if ( !dev_priv ) - return DRM_ERR(ENOMEM); - - memset( dev_priv, 0, sizeof(drm_mga_private_t) ); - dev_priv->chipset = init->chipset; + dev_priv = dev->dev_private; - dev_priv->usec_timeout = MGA_DEFAULT_USEC_TIMEOUT; - - if ( init->sgram ) { + if (init->sgram) { dev_priv->clear_cmd = MGA_DWGCTL_CLEAR | MGA_ATYPE_BLK; } else { dev_priv->clear_cmd = MGA_DWGCTL_CLEAR | MGA_ATYPE_RSTR; @@ -436,88 +799,66 @@ static int mga_do_init_dma( drm_device_t *dev, drm_mga_init_t *init ) DRM_GETSAREA(); - if(!dev_priv->sarea) { - DRM_ERROR( "failed to find sarea!\n" ); - /* Assign dev_private so we can do cleanup. */ - dev->dev_private = (void *)dev_priv; - mga_do_cleanup_dma( dev ); + if (!dev_priv->sarea) { + DRM_ERROR("failed to find sarea!\n"); return DRM_ERR(EINVAL); } - dev_priv->mmio = drm_core_findmap(dev, init->mmio_offset); - if(!dev_priv->mmio) { - DRM_ERROR( "failed to find mmio region!\n" ); - /* Assign dev_private so we can do cleanup. */ - dev->dev_private = (void *)dev_priv; - mga_do_cleanup_dma( dev ); - return DRM_ERR(EINVAL); - } - dev_priv->status = drm_core_findmap(dev, init->status_offset); - if(!dev_priv->status) { - DRM_ERROR( "failed to find status page!\n" ); - /* Assign dev_private so we can do cleanup. */ - dev->dev_private = (void *)dev_priv; - mga_do_cleanup_dma( dev ); - return DRM_ERR(EINVAL); - } - dev_priv->warp = drm_core_findmap(dev, init->warp_offset); - if(!dev_priv->warp) { - DRM_ERROR( "failed to find warp microcode region!\n" ); - /* Assign dev_private so we can do cleanup. */ - dev->dev_private = (void *)dev_priv; - mga_do_cleanup_dma( dev ); - return DRM_ERR(EINVAL); - } - dev_priv->primary = drm_core_findmap(dev, init->primary_offset); - if(!dev_priv->primary) { - DRM_ERROR( "failed to find primary dma region!\n" ); - /* Assign dev_private so we can do cleanup. */ - dev->dev_private = (void *)dev_priv; - mga_do_cleanup_dma( dev ); - return DRM_ERR(EINVAL); - } - dev->agp_buffer_map = drm_core_findmap(dev, init->buffers_offset); - if(!dev->agp_buffer_map) { - DRM_ERROR( "failed to find dma buffer region!\n" ); - /* Assign dev_private so we can do cleanup. */ - dev->dev_private = (void *)dev_priv; - mga_do_cleanup_dma( dev ); - return DRM_ERR(EINVAL); + if (! dev_priv->used_new_dma_init) { + dev_priv->status = drm_core_findmap(dev, init->status_offset); + if (!dev_priv->status) { + DRM_ERROR("failed to find status page!\n"); + return DRM_ERR(EINVAL); + } + dev_priv->mmio = drm_core_findmap(dev, init->mmio_offset); + if (!dev_priv->mmio) { + DRM_ERROR("failed to find mmio region!\n"); + return DRM_ERR(EINVAL); + } + dev_priv->warp = drm_core_findmap(dev, init->warp_offset); + if (!dev_priv->warp) { + DRM_ERROR("failed to find warp microcode region!\n"); + return DRM_ERR(EINVAL); + } + dev_priv->primary = drm_core_findmap(dev, init->primary_offset); + if (!dev_priv->primary) { + DRM_ERROR("failed to find primary dma region!\n"); + return DRM_ERR(EINVAL); + } + dev->agp_buffer_token = init->buffers_offset; + dev->agp_buffer_map = drm_core_findmap(dev, init->buffers_offset); + if (!dev->agp_buffer_map) { + DRM_ERROR("failed to find dma buffer region!\n"); + return DRM_ERR(EINVAL); + } + + drm_core_ioremap(dev_priv->warp, dev); + drm_core_ioremap(dev_priv->primary, dev); + drm_core_ioremap(dev->agp_buffer_map, dev); } dev_priv->sarea_priv = (drm_mga_sarea_t *)((u8 *)dev_priv->sarea->handle + init->sarea_priv_offset); - drm_core_ioremap( dev_priv->warp, dev ); - drm_core_ioremap( dev_priv->primary, dev ); - drm_core_ioremap( dev->agp_buffer_map, dev ); - - if(!dev_priv->warp->handle || - !dev_priv->primary->handle || - !dev->agp_buffer_map->handle ) { - DRM_ERROR( "failed to ioremap agp regions!\n" ); - /* Assign dev_private so we can do cleanup. */ - dev->dev_private = (void *)dev_priv; - mga_do_cleanup_dma( dev ); + if (!dev_priv->warp->handle || + !dev_priv->primary->handle || + ((dev_priv->dma_access != 0) && + ((dev->agp_buffer_map == NULL) || + (dev->agp_buffer_map->handle == NULL)))) { + DRM_ERROR("failed to ioremap agp regions!\n"); return DRM_ERR(ENOMEM); } - ret = mga_warp_install_microcode( dev_priv ); - if ( ret < 0 ) { - DRM_ERROR( "failed to install WARP ucode!\n" ); - /* Assign dev_private so we can do cleanup. */ - dev->dev_private = (void *)dev_priv; - mga_do_cleanup_dma( dev ); + ret = mga_warp_install_microcode(dev_priv); + if (ret < 0) { + DRM_ERROR("failed to install WARP ucode!\n"); return ret; } - ret = mga_warp_init( dev_priv ); - if ( ret < 0 ) { - DRM_ERROR( "failed to init WARP engine!\n" ); - /* Assign dev_private so we can do cleanup. */ - dev->dev_private = (void *)dev_priv; - mga_do_cleanup_dma( dev ); + ret = mga_warp_init(dev_priv); + if (ret < 0) { + DRM_ERROR("failed to init WARP engine!\n"); return ret; } @@ -557,22 +898,18 @@ static int mga_do_init_dma( drm_device_t *dev, drm_mga_init_t *init ) dev_priv->sarea_priv->last_frame.head = 0; dev_priv->sarea_priv->last_frame.wrap = 0; - if ( mga_freelist_init( dev, dev_priv ) < 0 ) { - DRM_ERROR( "could not initialize freelist\n" ); - /* Assign dev_private so we can do cleanup. */ - dev->dev_private = (void *)dev_priv; - mga_do_cleanup_dma( dev ); + if (mga_freelist_init(dev, dev_priv) < 0) { + DRM_ERROR("could not initialize freelist\n"); return DRM_ERR(ENOMEM); } - /* Make dev_private visable to others. */ - dev->dev_private = (void *)dev_priv; return 0; } static int mga_do_cleanup_dma( drm_device_t *dev ) { - DRM_DEBUG( "\n" ); + int err = 0; + DRM_DEBUG("\n"); /* Make sure interrupts are disabled here because the uninstall ioctl * may not have been called from userspace and after dev_private @@ -583,20 +920,49 @@ static int mga_do_cleanup_dma( drm_device_t *dev ) if ( dev->dev_private ) { drm_mga_private_t *dev_priv = dev->dev_private; - if ( dev_priv->warp != NULL ) - drm_core_ioremapfree( dev_priv->warp, dev ); - if ( dev_priv->primary != NULL ) - drm_core_ioremapfree( dev_priv->primary, dev ); - if ( dev->agp_buffer_map != NULL ) - drm_core_ioremapfree( dev->agp_buffer_map, dev ); + if ((dev_priv->warp != NULL) + && (dev_priv->mmio->type != _DRM_CONSISTENT)) + drm_core_ioremapfree(dev_priv->warp, dev); + + if ((dev_priv->primary != NULL) + && (dev_priv->primary->type != _DRM_CONSISTENT)) + drm_core_ioremapfree(dev_priv->primary, dev); - if ( dev_priv->head != NULL ) { - mga_freelist_cleanup( dev ); + if (dev->agp_buffer_map != NULL) + drm_core_ioremapfree(dev->agp_buffer_map, dev); + + if (dev_priv->used_new_dma_init) { + if (dev_priv->agp_mem != NULL) { + dev_priv->agp_textures = NULL; + drm_unbind_agp(dev_priv->agp_mem); + + drm_free_agp(dev_priv->agp_mem, dev_priv->agp_pages); + dev_priv->agp_pages = 0; + dev_priv->agp_mem = NULL; + } + + if ((dev->agp != NULL) && dev->agp->acquired) { + err = drm_agp_release(dev); + } + + dev_priv->used_new_dma_init = 0; } - drm_free( dev->dev_private, sizeof(drm_mga_private_t), - DRM_MEM_DRIVER ); - dev->dev_private = NULL; + dev_priv->warp = NULL; + dev_priv->primary = NULL; + dev_priv->mmio = NULL; + dev_priv->status = NULL; + dev_priv->sarea = NULL; + dev_priv->sarea_priv = NULL; + dev->agp_buffer_map = NULL; + + memset(&dev_priv->prim, 0, sizeof(dev_priv->prim)); + dev_priv->warp_pipe = 0; + memset(dev_priv->warp_pipe_phys, 0, sizeof(dev_priv->warp_pipe_phys)); + + if (dev_priv->head != NULL) { + mga_freelist_cleanup(dev); + } } return 0; @@ -606,14 +972,20 @@ int mga_dma_init( DRM_IOCTL_ARGS ) { DRM_DEVICE; drm_mga_init_t init; + int err; LOCK_TEST_WITH_RETURN( dev, filp ); - DRM_COPY_FROM_USER_IOCTL( init, (drm_mga_init_t __user *)data, sizeof(init) ); + DRM_COPY_FROM_USER_IOCTL(init, (drm_mga_init_t __user *) data, + sizeof(init)); switch ( init.func ) { case MGA_INIT_DMA: - return mga_do_init_dma( dev, &init ); + err = mga_do_init_dma(dev, &init); + if (err) { + (void) mga_do_cleanup_dma(dev); + } + return err; case MGA_CLEANUP_DMA: return mga_do_cleanup_dma( dev ); } @@ -742,7 +1114,21 @@ int mga_dma_buffers( DRM_IOCTL_ARGS ) return ret; } -void mga_driver_pretakedown(drm_device_t *dev) +/** + * Called just before the module is unloaded. + */ +int mga_driver_postcleanup(drm_device_t * dev) +{ + drm_free(dev->dev_private, sizeof(drm_mga_private_t), DRM_MEM_DRIVER); + dev->dev_private = NULL; + + return 0; +} + +/** + * Called when the last opener of the device is closed. + */ +void mga_driver_pretakedown(drm_device_t * dev) { mga_do_cleanup_dma( dev ); } diff --git a/drivers/char/drm/mga_drm.h b/drivers/char/drm/mga_drm.h index 521d4451d012..d20aab3bd57b 100644 --- a/drivers/char/drm/mga_drm.h +++ b/drivers/char/drm/mga_drm.h @@ -73,7 +73,8 @@ #define MGA_CARD_TYPE_G200 1 #define MGA_CARD_TYPE_G400 2 - +#define MGA_CARD_TYPE_G450 3 /* not currently used */ +#define MGA_CARD_TYPE_G550 4 #define MGA_FRONT 0x1 #define MGA_BACK 0x2 @@ -225,10 +226,6 @@ typedef struct _drm_mga_sarea { } drm_mga_sarea_t; -/* WARNING: If you change any of these defines, make sure to change the - * defines in the Xserver file (xf86drmMga.h) - */ - /* MGA specific ioctls * The device specific ioctl range is 0x40 to 0x79. */ @@ -243,6 +240,14 @@ typedef struct _drm_mga_sarea { #define DRM_MGA_BLIT 0x08 #define DRM_MGA_GETPARAM 0x09 +/* 3.2: + * ioctls for operating on fences. + */ +#define DRM_MGA_SET_FENCE 0x0a +#define DRM_MGA_WAIT_FENCE 0x0b +#define DRM_MGA_DMA_BOOTSTRAP 0x0c + + #define DRM_IOCTL_MGA_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_INIT, drm_mga_init_t) #define DRM_IOCTL_MGA_FLUSH DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_FLUSH, drm_lock_t) #define DRM_IOCTL_MGA_RESET DRM_IO( DRM_COMMAND_BASE + DRM_MGA_RESET) @@ -253,6 +258,9 @@ typedef struct _drm_mga_sarea { #define DRM_IOCTL_MGA_ILOAD DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_ILOAD, drm_mga_iload_t) #define DRM_IOCTL_MGA_BLIT DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_BLIT, drm_mga_blit_t) #define DRM_IOCTL_MGA_GETPARAM DRM_IOWR(DRM_COMMAND_BASE + DRM_MGA_GETPARAM, drm_mga_getparam_t) +#define DRM_IOCTL_MGA_SET_FENCE DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_SET_FENCE, uint32_t) +#define DRM_IOCTL_MGA_WAIT_FENCE DRM_IOWR(DRM_COMMAND_BASE + DRM_MGA_WAIT_FENCE, uint32_t) +#define DRM_IOCTL_MGA_DMA_BOOTSTRAP DRM_IOWR(DRM_COMMAND_BASE + DRM_MGA_DMA_BOOTSTRAP, drm_mga_dma_bootstrap_t) typedef struct _drm_mga_warp_index { int installed; @@ -291,12 +299,72 @@ typedef struct drm_mga_init { unsigned long buffers_offset; } drm_mga_init_t; -typedef struct drm_mga_fullscreen { - enum { - MGA_INIT_FULLSCREEN = 0x01, - MGA_CLEANUP_FULLSCREEN = 0x02 - } func; -} drm_mga_fullscreen_t; +typedef struct drm_mga_dma_bootstrap { + /** + * \name AGP texture region + * + * On return from the DRM_MGA_DMA_BOOTSTRAP ioctl, these fields will + * be filled in with the actual AGP texture settings. + * + * \warning + * If these fields are non-zero, but dma_mga_dma_bootstrap::agp_mode + * is zero, it means that PCI memory (most likely through the use of + * an IOMMU) is being used for "AGP" textures. + */ + /*@{*/ + unsigned long texture_handle; /**< Handle used to map AGP textures. */ + uint32_t texture_size; /**< Size of the AGP texture region. */ + /*@}*/ + + + /** + * Requested size of the primary DMA region. + * + * On return from the DRM_MGA_DMA_BOOTSTRAP ioctl, this field will be + * filled in with the actual AGP mode. If AGP was not available + */ + uint32_t primary_size; + + + /** + * Requested number of secondary DMA buffers. + * + * On return from the DRM_MGA_DMA_BOOTSTRAP ioctl, this field will be + * filled in with the actual number of secondary DMA buffers + * allocated. Particularly when PCI DMA is used, this may be + * (subtantially) less than the number requested. + */ + uint32_t secondary_bin_count; + + + /** + * Requested size of each secondary DMA buffer. + * + * While the kernel \b is free to reduce + * dma_mga_dma_bootstrap::secondary_bin_count, it is \b not allowed + * to reduce dma_mga_dma_bootstrap::secondary_bin_size. + */ + uint32_t secondary_bin_size; + + + /** + * Bit-wise mask of AGPSTAT2_* values. Currently only \c AGPSTAT2_1X, + * \c AGPSTAT2_2X, and \c AGPSTAT2_4X are supported. If this value is + * zero, it means that PCI DMA should be used, even if AGP is + * possible. + * + * On return from the DRM_MGA_DMA_BOOTSTRAP ioctl, this field will be + * filled in with the actual AGP mode. If AGP was not available + * (i.e., PCI DMA was used), this value will be zero. + */ + uint32_t agp_mode; + + + /** + * Desired AGP GART size, measured in megabytes. + */ + uint8_t agp_size; +} drm_mga_dma_bootstrap_t; typedef struct drm_mga_clear { unsigned int flags; @@ -341,6 +409,14 @@ typedef struct _drm_mga_blit { */ #define MGA_PARAM_IRQ_NR 1 +/* 3.2: Query the actual card type. The DDX only distinguishes between + * G200 chips and non-G200 chips, which it calls G400. It turns out that + * there are some very sublte differences between the G4x0 chips and the G550 + * chips. Using this parameter query, a client-side driver can detect the + * difference between a G4x0 and a G550. + */ +#define MGA_PARAM_CARD_TYPE 2 + typedef struct drm_mga_getparam { int param; void __user *value; diff --git a/drivers/char/drm/mga_drv.c b/drivers/char/drm/mga_drv.c index 844cca9cb29d..daabbba3b297 100644 --- a/drivers/char/drm/mga_drv.c +++ b/drivers/char/drm/mga_drv.c @@ -38,8 +38,15 @@ #include "drm_pciids.h" +static int mga_driver_device_is_agp(drm_device_t * dev); static int postinit( struct drm_device *dev, unsigned long flags ) { + drm_mga_private_t * const dev_priv = + (drm_mga_private_t *) dev->dev_private; + + dev_priv->mmio_base = pci_resource_start(dev->pdev, 1); + dev_priv->mmio_size = pci_resource_len(dev->pdev, 1); + dev->counters += 3; dev->types[6] = _DRM_STAT_IRQ; dev->types[7] = _DRM_STAT_PRIMARY; @@ -79,8 +86,11 @@ extern int mga_max_ioctl; static struct drm_driver driver = { .driver_features = DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | DRIVER_USE_MTRR | DRIVER_HAVE_DMA | DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_IRQ_VBL, + .preinit = mga_driver_preinit, + .postcleanup = mga_driver_postcleanup, .pretakedown = mga_driver_pretakedown, .dma_quiescent = mga_driver_dma_quiescent, + .device_is_agp = mga_driver_device_is_agp, .vblank_wait = mga_driver_vblank_wait, .irq_preinstall = mga_driver_irq_preinstall, .irq_postinstall = mga_driver_irq_postinstall, @@ -128,3 +138,38 @@ module_exit(mga_exit); MODULE_AUTHOR( DRIVER_AUTHOR ); MODULE_DESCRIPTION( DRIVER_DESC ); MODULE_LICENSE("GPL and additional rights"); + +/** + * Determine if the device really is AGP or not. + * + * In addition to the usual tests performed by \c drm_device_is_agp, this + * function detects PCI G450 cards that appear to the system exactly like + * AGP G450 cards. + * + * \param dev The device to be tested. + * + * \returns + * If the device is a PCI G450, zero is returned. Otherwise 2 is returned. + */ +int mga_driver_device_is_agp(drm_device_t * dev) +{ + const struct pci_dev * const pdev = dev->pdev; + + + /* There are PCI versions of the G450. These cards have the + * same PCI ID as the AGP G450, but have an additional PCI-to-PCI + * bridge chip. We detect these cards, which are not currently + * supported by this driver, by looking at the device ID of the + * bus the "card" is on. If vendor is 0x3388 (Hint Corp) and the + * device is 0x0021 (HB6 Universal PCI-PCI bridge), we reject the + * device. + */ + + if ( (pdev->device == 0x0525) + && (pdev->bus->self->vendor == 0x3388) + && (pdev->bus->self->device == 0x0021) ) { + return 0; + } + + return 2; +} diff --git a/drivers/char/drm/mga_drv.h b/drivers/char/drm/mga_drv.h index 9412e2816eb7..b22fdbd4f830 100644 --- a/drivers/char/drm/mga_drv.h +++ b/drivers/char/drm/mga_drv.h @@ -38,10 +38,10 @@ #define DRIVER_NAME "mga" #define DRIVER_DESC "Matrox G200/G400" -#define DRIVER_DATE "20021029" +#define DRIVER_DATE "20050607" #define DRIVER_MAJOR 3 -#define DRIVER_MINOR 1 +#define DRIVER_MINOR 2 #define DRIVER_PATCHLEVEL 0 typedef struct drm_mga_primary_buffer { @@ -87,9 +87,43 @@ typedef struct drm_mga_private { int chipset; int usec_timeout; + /** + * If set, the new DMA initialization sequence was used. This is + * primarilly used to select how the driver should uninitialized its + * internal DMA structures. + */ + int used_new_dma_init; + + /** + * If AGP memory is used for DMA buffers, this will be the value + * \c MGA_PAGPXFER. Otherwise, it will be zero (for a PCI transfer). + */ + u32 dma_access; + + /** + * If AGP memory is used for DMA buffers, this will be the value + * \c MGA_WAGP_ENABLE. Otherwise, it will be zero (for a PCI + * transfer). + */ + u32 wagp_enable; + + /** + * \name MMIO region parameters. + * + * \sa drm_mga_private_t::mmio + */ + /*@{*/ + u32 mmio_base; /**< Bus address of base of MMIO. */ + u32 mmio_size; /**< Size of the MMIO region. */ + /*@}*/ + u32 clear_cmd; u32 maccess; + wait_queue_head_t fence_queue; + atomic_t last_fence_retired; + u32 next_fence_to_post; + unsigned int fb_cpp; unsigned int front_offset; unsigned int front_pitch; @@ -108,35 +142,43 @@ typedef struct drm_mga_private { drm_local_map_t *status; drm_local_map_t *warp; drm_local_map_t *primary; - drm_local_map_t *buffers; drm_local_map_t *agp_textures; + + DRM_AGP_MEM *agp_mem; + unsigned int agp_pages; } drm_mga_private_t; /* mga_dma.c */ -extern int mga_dma_init( DRM_IOCTL_ARGS ); -extern int mga_dma_flush( DRM_IOCTL_ARGS ); -extern int mga_dma_reset( DRM_IOCTL_ARGS ); -extern int mga_dma_buffers( DRM_IOCTL_ARGS ); -extern void mga_driver_pretakedown(drm_device_t *dev); -extern int mga_driver_dma_quiescent(drm_device_t *dev); - -extern int mga_do_wait_for_idle( drm_mga_private_t *dev_priv ); - -extern void mga_do_dma_flush( drm_mga_private_t *dev_priv ); -extern void mga_do_dma_wrap_start( drm_mga_private_t *dev_priv ); -extern void mga_do_dma_wrap_end( drm_mga_private_t *dev_priv ); +extern int mga_driver_preinit(drm_device_t * dev, unsigned long flags); +extern int mga_dma_bootstrap(DRM_IOCTL_ARGS); +extern int mga_dma_init(DRM_IOCTL_ARGS); +extern int mga_dma_flush(DRM_IOCTL_ARGS); +extern int mga_dma_reset(DRM_IOCTL_ARGS); +extern int mga_dma_buffers(DRM_IOCTL_ARGS); +extern int mga_driver_postcleanup(drm_device_t * dev); +extern void mga_driver_pretakedown(drm_device_t * dev); +extern int mga_driver_dma_quiescent(drm_device_t * dev); + +extern int mga_do_wait_for_idle(drm_mga_private_t * dev_priv); + +extern void mga_do_dma_flush(drm_mga_private_t * dev_priv); +extern void mga_do_dma_wrap_start(drm_mga_private_t * dev_priv); +extern void mga_do_dma_wrap_end(drm_mga_private_t * dev_priv); extern int mga_freelist_put( drm_device_t *dev, drm_buf_t *buf ); /* mga_warp.c */ -extern int mga_warp_install_microcode( drm_mga_private_t *dev_priv ); -extern int mga_warp_init( drm_mga_private_t *dev_priv ); - -extern int mga_driver_vblank_wait(drm_device_t *dev, unsigned int *sequence); -extern irqreturn_t mga_driver_irq_handler( DRM_IRQ_ARGS ); -extern void mga_driver_irq_preinstall( drm_device_t *dev ); -extern void mga_driver_irq_postinstall( drm_device_t *dev ); -extern void mga_driver_irq_uninstall( drm_device_t *dev ); +extern unsigned int mga_warp_microcode_size(const drm_mga_private_t * dev_priv); +extern int mga_warp_install_microcode(drm_mga_private_t * dev_priv); +extern int mga_warp_init(drm_mga_private_t * dev_priv); + + /* mga_irq.c */ +extern int mga_driver_fence_wait(drm_device_t * dev, unsigned int *sequence); +extern int mga_driver_vblank_wait(drm_device_t * dev, unsigned int *sequence); +extern irqreturn_t mga_driver_irq_handler(DRM_IRQ_ARGS); +extern void mga_driver_irq_preinstall(drm_device_t * dev); +extern void mga_driver_irq_postinstall(drm_device_t * dev); +extern void mga_driver_irq_uninstall(drm_device_t * dev); extern long mga_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg); @@ -527,6 +569,12 @@ do { \ */ #define MGA_EXEC 0x0100 +/* AGP PLL encoding (for G200 only). + */ +#define MGA_AGP_PLL 0x1e4c +# define MGA_AGP2XPLL_DISABLE (0 << 0) +# define MGA_AGP2XPLL_ENABLE (1 << 0) + /* Warp registers */ #define MGA_WR0 0x2d00 diff --git a/drivers/char/drm/mga_ioc32.c b/drivers/char/drm/mga_ioc32.c index bc745cfa2095..77d738e75a4d 100644 --- a/drivers/char/drm/mga_ioc32.c +++ b/drivers/char/drm/mga_ioc32.c @@ -129,9 +129,76 @@ static int compat_mga_getparam(struct file *file, unsigned int cmd, DRM_IOCTL_MGA_GETPARAM, (unsigned long)getparam); } +typedef struct drm_mga_drm_bootstrap32 { + u32 texture_handle; + u32 texture_size; + u32 primary_size; + u32 secondary_bin_count; + u32 secondary_bin_size; + u32 agp_mode; + u8 agp_size; +} drm_mga_dma_bootstrap32_t; + +static int compat_mga_dma_bootstrap(struct file *file, unsigned int cmd, + unsigned long arg) +{ + drm_mga_dma_bootstrap32_t dma_bootstrap32; + drm_mga_dma_bootstrap_t __user *dma_bootstrap; + int err; + + if (copy_from_user(&dma_bootstrap32, (void __user *)arg, + sizeof(dma_bootstrap32))) + return -EFAULT; + + dma_bootstrap = compat_alloc_user_space(sizeof(*dma_bootstrap)); + if (!access_ok(VERIFY_WRITE, dma_bootstrap, sizeof(*dma_bootstrap)) + || __put_user(dma_bootstrap32.texture_handle, + &dma_bootstrap->texture_handle) + || __put_user(dma_bootstrap32.texture_size, + &dma_bootstrap->texture_size) + || __put_user(dma_bootstrap32.primary_size, + &dma_bootstrap->primary_size) + || __put_user(dma_bootstrap32.secondary_bin_count, + &dma_bootstrap->secondary_bin_count) + || __put_user(dma_bootstrap32.secondary_bin_size, + &dma_bootstrap->secondary_bin_size) + || __put_user(dma_bootstrap32.agp_mode, &dma_bootstrap->agp_mode) + || __put_user(dma_bootstrap32.agp_size, &dma_bootstrap->agp_size)) + return -EFAULT; + + err = drm_ioctl(file->f_dentry->d_inode, file, + DRM_IOCTL_MGA_DMA_BOOTSTRAP, + (unsigned long)dma_bootstrap); + if (err) + return err; + + if (__get_user(dma_bootstrap32.texture_handle, + &dma_bootstrap->texture_handle) + || __get_user(dma_bootstrap32.texture_size, + &dma_bootstrap->texture_size) + || __get_user(dma_bootstrap32.primary_size, + &dma_bootstrap->primary_size) + || __get_user(dma_bootstrap32.secondary_bin_count, + &dma_bootstrap->secondary_bin_count) + || __get_user(dma_bootstrap32.secondary_bin_size, + &dma_bootstrap->secondary_bin_size) + || __get_user(dma_bootstrap32.agp_mode, + &dma_bootstrap->agp_mode) + || __get_user(dma_bootstrap32.agp_size, + &dma_bootstrap->agp_size)) + return -EFAULT; + + if (copy_to_user((void __user *)arg, &dma_bootstrap32, + sizeof(dma_bootstrap32))) + return -EFAULT; + + return 0; +} + drm_ioctl_compat_t *mga_compat_ioctls[] = { [DRM_MGA_INIT] = compat_mga_init, [DRM_MGA_GETPARAM] = compat_mga_getparam, + [DRM_MGA_DMA_BOOTSTRAP] = compat_mga_dma_bootstrap, }; /** diff --git a/drivers/char/drm/mga_irq.c b/drivers/char/drm/mga_irq.c index bc0b6b5d43a6..52eaa4e788f9 100644 --- a/drivers/char/drm/mga_irq.c +++ b/drivers/char/drm/mga_irq.c @@ -41,15 +41,40 @@ irqreturn_t mga_driver_irq_handler( DRM_IRQ_ARGS ) drm_mga_private_t *dev_priv = (drm_mga_private_t *)dev->dev_private; int status; + int handled = 0; + + status = MGA_READ(MGA_STATUS); - status = MGA_READ( MGA_STATUS ); - /* VBLANK interrupt */ if ( status & MGA_VLINEPEN ) { MGA_WRITE( MGA_ICLEAR, MGA_VLINEICLR ); atomic_inc(&dev->vbl_received); DRM_WAKEUP(&dev->vbl_queue); - drm_vbl_send_signals( dev ); + drm_vbl_send_signals(dev); + handled = 1; + } + + /* SOFTRAP interrupt */ + if (status & MGA_SOFTRAPEN) { + const u32 prim_start = MGA_READ(MGA_PRIMADDRESS); + const u32 prim_end = MGA_READ(MGA_PRIMEND); + + + MGA_WRITE(MGA_ICLEAR, MGA_SOFTRAPICLR); + + /* In addition to clearing the interrupt-pending bit, we + * have to write to MGA_PRIMEND to re-start the DMA operation. + */ + if ( (prim_start & ~0x03) != (prim_end & ~0x03) ) { + MGA_WRITE(MGA_PRIMEND, prim_end); + } + + atomic_inc(&dev_priv->last_fence_retired); + DRM_WAKEUP(&dev_priv->fence_queue); + handled = 1; + } + + if ( handled ) { return IRQ_HANDLED; } return IRQ_NONE; @@ -73,9 +98,28 @@ int mga_driver_vblank_wait(drm_device_t *dev, unsigned int *sequence) return ret; } -void mga_driver_irq_preinstall( drm_device_t *dev ) { - drm_mga_private_t *dev_priv = - (drm_mga_private_t *)dev->dev_private; +int mga_driver_fence_wait(drm_device_t * dev, unsigned int *sequence) +{ + drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private; + unsigned int cur_fence; + int ret = 0; + + /* Assume that the user has missed the current sequence number + * by about a day rather than she wants to wait for years + * using fences. + */ + DRM_WAIT_ON(ret, dev_priv->fence_queue, 3 * DRM_HZ, + (((cur_fence = atomic_read(&dev_priv->last_fence_retired)) + - *sequence) <= (1 << 23))); + + *sequence = cur_fence; + + return ret; +} + +void mga_driver_irq_preinstall(drm_device_t * dev) +{ + drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private; /* Disable *all* interrupts */ MGA_WRITE( MGA_IEN, 0 ); @@ -83,12 +127,14 @@ void mga_driver_irq_preinstall( drm_device_t *dev ) { MGA_WRITE( MGA_ICLEAR, ~0 ); } -void mga_driver_irq_postinstall( drm_device_t *dev ) { - drm_mga_private_t *dev_priv = - (drm_mga_private_t *)dev->dev_private; +void mga_driver_irq_postinstall(drm_device_t * dev) +{ + drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private; + + DRM_INIT_WAITQUEUE( &dev_priv->fence_queue ); - /* Turn on VBL interrupt */ - MGA_WRITE( MGA_IEN, MGA_VLINEIEN ); + /* Turn on vertical blank interrupt and soft trap interrupt. */ + MGA_WRITE(MGA_IEN, MGA_VLINEIEN | MGA_SOFTRAPEN); } void mga_driver_irq_uninstall( drm_device_t *dev ) { @@ -98,5 +144,7 @@ void mga_driver_irq_uninstall( drm_device_t *dev ) { return; /* Disable *all* interrupts */ - MGA_WRITE( MGA_IEN, 0 ); + MGA_WRITE(MGA_IEN, 0); + + dev->irq_enabled = 0; } diff --git a/drivers/char/drm/mga_state.c b/drivers/char/drm/mga_state.c index 3c7a8f5ba501..05bbb4719376 100644 --- a/drivers/char/drm/mga_state.c +++ b/drivers/char/drm/mga_state.c @@ -53,16 +53,16 @@ static void mga_emit_clip_rect( drm_mga_private_t *dev_priv, /* Force reset of DWGCTL on G400 (eliminates clip disable bit). */ - if ( dev_priv->chipset == MGA_CARD_TYPE_G400 ) { - DMA_BLOCK( MGA_DWGCTL, ctx->dwgctl, - MGA_LEN + MGA_EXEC, 0x80000000, - MGA_DWGCTL, ctx->dwgctl, - MGA_LEN + MGA_EXEC, 0x80000000 ); + if (dev_priv->chipset == MGA_CARD_TYPE_G400) { + DMA_BLOCK(MGA_DWGCTL, ctx->dwgctl, + MGA_LEN + MGA_EXEC, 0x80000000, + MGA_DWGCTL, ctx->dwgctl, + MGA_LEN + MGA_EXEC, 0x80000000); } - DMA_BLOCK( MGA_DMAPAD, 0x00000000, - MGA_CXBNDRY, (box->x2 << 16) | box->x1, - MGA_YTOP, box->y1 * pitch, - MGA_YBOT, box->y2 * pitch ); + DMA_BLOCK(MGA_DMAPAD, 0x00000000, + MGA_CXBNDRY, ((box->x2 - 1) << 16) | box->x1, + MGA_YTOP, box->y1 * pitch, + MGA_YBOT, (box->y2 - 1) * pitch); ADVANCE_DMA(); } @@ -260,12 +260,11 @@ static __inline__ void mga_g200_emit_pipe( drm_mga_private_t *dev_priv ) /* Padding required to to hardware bug. */ - DMA_BLOCK( MGA_DMAPAD, 0xffffffff, - MGA_DMAPAD, 0xffffffff, - MGA_DMAPAD, 0xffffffff, - MGA_WIADDR, (dev_priv->warp_pipe_phys[pipe] | - MGA_WMODE_START | - MGA_WAGP_ENABLE) ); + DMA_BLOCK(MGA_DMAPAD, 0xffffffff, + MGA_DMAPAD, 0xffffffff, + MGA_DMAPAD, 0xffffffff, + MGA_WIADDR, (dev_priv->warp_pipe_phys[pipe] | + MGA_WMODE_START | dev_priv->wagp_enable)); ADVANCE_DMA(); } @@ -342,12 +341,11 @@ static __inline__ void mga_g400_emit_pipe( drm_mga_private_t *dev_priv ) MGA_WR60, MGA_G400_WR_MAGIC ); /* tex1 height */ /* Padding required to to hardware bug */ - DMA_BLOCK( MGA_DMAPAD, 0xffffffff, - MGA_DMAPAD, 0xffffffff, - MGA_DMAPAD, 0xffffffff, - MGA_WIADDR2, (dev_priv->warp_pipe_phys[pipe] | - MGA_WMODE_START | - MGA_WAGP_ENABLE) ); + DMA_BLOCK(MGA_DMAPAD, 0xffffffff, + MGA_DMAPAD, 0xffffffff, + MGA_DMAPAD, 0xffffffff, + MGA_WIADDR2, (dev_priv->warp_pipe_phys[pipe] | + MGA_WMODE_START | dev_priv->wagp_enable)); ADVANCE_DMA(); } @@ -459,9 +457,9 @@ static int mga_verify_state( drm_mga_private_t *dev_priv ) if ( dirty & MGA_UPLOAD_TEX0 ) ret |= mga_verify_tex( dev_priv, 0 ); - if ( dev_priv->chipset == MGA_CARD_TYPE_G400 ) { - if ( dirty & MGA_UPLOAD_TEX1 ) - ret |= mga_verify_tex( dev_priv, 1 ); + if (dev_priv->chipset >= MGA_CARD_TYPE_G400) { + if (dirty & MGA_UPLOAD_TEX1) + ret |= mga_verify_tex(dev_priv, 1); if ( dirty & MGA_UPLOAD_PIPE ) ret |= ( sarea_priv->warp_pipe > MGA_MAX_G400_PIPES ); @@ -686,12 +684,12 @@ static void mga_dma_dispatch_vertex( drm_device_t *dev, drm_buf_t *buf ) BEGIN_DMA( 1 ); - DMA_BLOCK( MGA_DMAPAD, 0x00000000, - MGA_DMAPAD, 0x00000000, - MGA_SECADDRESS, (address | - MGA_DMA_VERTEX), - MGA_SECEND, ((address + length) | - MGA_PAGPXFER) ); + DMA_BLOCK(MGA_DMAPAD, 0x00000000, + MGA_DMAPAD, 0x00000000, + MGA_SECADDRESS, (address | + MGA_DMA_VERTEX), + MGA_SECEND, ((address + length) | + dev_priv->dma_access)); ADVANCE_DMA(); } while ( ++i < sarea_priv->nbox ); @@ -733,11 +731,11 @@ static void mga_dma_dispatch_indices( drm_device_t *dev, drm_buf_t *buf, BEGIN_DMA( 1 ); - DMA_BLOCK( MGA_DMAPAD, 0x00000000, - MGA_DMAPAD, 0x00000000, - MGA_SETUPADDRESS, address + start, - MGA_SETUPEND, ((address + end) | - MGA_PAGPXFER) ); + DMA_BLOCK(MGA_DMAPAD, 0x00000000, + MGA_DMAPAD, 0x00000000, + MGA_SETUPADDRESS, address + start, + MGA_SETUPEND, ((address + end) | + dev_priv->dma_access)); ADVANCE_DMA(); } while ( ++i < sarea_priv->nbox ); @@ -764,7 +762,7 @@ static void mga_dma_dispatch_iload( drm_device_t *dev, drm_buf_t *buf, drm_mga_private_t *dev_priv = dev->dev_private; drm_mga_buf_priv_t *buf_priv = buf->dev_private; drm_mga_context_regs_t *ctx = &dev_priv->sarea_priv->context_state; - u32 srcorg = buf->bus_address | MGA_SRCACC_AGP | MGA_SRCMAP_SYSMEM; + u32 srcorg = buf->bus_address | dev_priv->dma_access | MGA_SRCMAP_SYSMEM; u32 y2; DMA_LOCALS; DRM_DEBUG( "buf=%d used=%d\n", buf->idx, buf->used ); @@ -1095,6 +1093,9 @@ static int mga_getparam( DRM_IOCTL_ARGS ) case MGA_PARAM_IRQ_NR: value = dev->irq; break; + case MGA_PARAM_CARD_TYPE: + value = dev_priv->chipset; + break; default: return DRM_ERR(EINVAL); } @@ -1107,17 +1108,82 @@ static int mga_getparam( DRM_IOCTL_ARGS ) return 0; } +static int mga_set_fence(DRM_IOCTL_ARGS) +{ + DRM_DEVICE; + drm_mga_private_t *dev_priv = dev->dev_private; + u32 temp; + DMA_LOCALS; + + if (!dev_priv) { + DRM_ERROR("%s called with no initialization\n", __FUNCTION__); + return DRM_ERR(EINVAL); + } + + DRM_DEBUG("pid=%d\n", DRM_CURRENTPID); + + /* I would normal do this assignment in the declaration of temp, + * but dev_priv may be NULL. + */ + + temp = dev_priv->next_fence_to_post; + dev_priv->next_fence_to_post++; + + BEGIN_DMA(1); + DMA_BLOCK(MGA_DMAPAD, 0x00000000, + MGA_DMAPAD, 0x00000000, + MGA_DMAPAD, 0x00000000, + MGA_SOFTRAP, 0x00000000); + ADVANCE_DMA(); + + if (DRM_COPY_TO_USER( (u32 __user *) data, & temp, sizeof(u32))) { + DRM_ERROR("copy_to_user\n"); + return DRM_ERR(EFAULT); + } + + return 0; +} + +static int mga_wait_fence(DRM_IOCTL_ARGS) +{ + DRM_DEVICE; + drm_mga_private_t *dev_priv = dev->dev_private; + u32 fence; + + if (!dev_priv) { + DRM_ERROR("%s called with no initialization\n", __FUNCTION__); + return DRM_ERR(EINVAL); + } + + DRM_COPY_FROM_USER_IOCTL(fence, (u32 __user *) data, sizeof(u32)); + + DRM_DEBUG("pid=%d\n", DRM_CURRENTPID); + + mga_driver_fence_wait(dev, & fence); + + if (DRM_COPY_TO_USER( (u32 __user *) data, & fence, sizeof(u32))) { + DRM_ERROR("copy_to_user\n"); + return DRM_ERR(EFAULT); + } + + return 0; +} + drm_ioctl_desc_t mga_ioctls[] = { - [DRM_IOCTL_NR(DRM_MGA_INIT)] = { mga_dma_init, 1, 1 }, - [DRM_IOCTL_NR(DRM_MGA_FLUSH)] = { mga_dma_flush, 1, 0 }, - [DRM_IOCTL_NR(DRM_MGA_RESET)] = { mga_dma_reset, 1, 0 }, - [DRM_IOCTL_NR(DRM_MGA_SWAP)] = { mga_dma_swap, 1, 0 }, - [DRM_IOCTL_NR(DRM_MGA_CLEAR)] = { mga_dma_clear, 1, 0 }, - [DRM_IOCTL_NR(DRM_MGA_VERTEX)] = { mga_dma_vertex, 1, 0 }, - [DRM_IOCTL_NR(DRM_MGA_INDICES)] = { mga_dma_indices, 1, 0 }, - [DRM_IOCTL_NR(DRM_MGA_ILOAD)] = { mga_dma_iload, 1, 0 }, - [DRM_IOCTL_NR(DRM_MGA_BLIT)] = { mga_dma_blit, 1, 0 }, - [DRM_IOCTL_NR(DRM_MGA_GETPARAM)]= { mga_getparam, 1, 0 }, + [DRM_IOCTL_NR(DRM_MGA_INIT)] = {mga_dma_init, 1, 1}, + [DRM_IOCTL_NR(DRM_MGA_FLUSH)] = {mga_dma_flush, 1, 0}, + [DRM_IOCTL_NR(DRM_MGA_RESET)] = {mga_dma_reset, 1, 0}, + [DRM_IOCTL_NR(DRM_MGA_SWAP)] = {mga_dma_swap, 1, 0}, + [DRM_IOCTL_NR(DRM_MGA_CLEAR)] = {mga_dma_clear, 1, 0}, + [DRM_IOCTL_NR(DRM_MGA_VERTEX)] = {mga_dma_vertex, 1, 0}, + [DRM_IOCTL_NR(DRM_MGA_INDICES)] = {mga_dma_indices, 1, 0}, + [DRM_IOCTL_NR(DRM_MGA_ILOAD)] = {mga_dma_iload, 1, 0}, + [DRM_IOCTL_NR(DRM_MGA_BLIT)] = {mga_dma_blit, 1, 0}, + [DRM_IOCTL_NR(DRM_MGA_GETPARAM)] = {mga_getparam, 1, 0}, + [DRM_IOCTL_NR(DRM_MGA_SET_FENCE)] = {mga_set_fence, 1, 0}, + [DRM_IOCTL_NR(DRM_MGA_WAIT_FENCE)] = {mga_wait_fence, 1, 0}, + [DRM_IOCTL_NR(DRM_MGA_DMA_BOOTSTRAP)] = {mga_dma_bootstrap, 1, 1}, + }; int mga_max_ioctl = DRM_ARRAY_SIZE(mga_ioctls); diff --git a/drivers/char/drm/mga_warp.c b/drivers/char/drm/mga_warp.c index 0a3a0cc700dc..55ccc8a0ac29 100644 --- a/drivers/char/drm/mga_warp.c +++ b/drivers/char/drm/mga_warp.c @@ -48,65 +48,52 @@ do { \ vcbase += WARP_UCODE_SIZE( which ); \ } while (0) - -static unsigned int mga_warp_g400_microcode_size( drm_mga_private_t *dev_priv ) -{ - unsigned int size; - - size = ( WARP_UCODE_SIZE( warp_g400_tgz ) + - WARP_UCODE_SIZE( warp_g400_tgza ) + - WARP_UCODE_SIZE( warp_g400_tgzaf ) + - WARP_UCODE_SIZE( warp_g400_tgzf ) + - WARP_UCODE_SIZE( warp_g400_tgzs ) + - WARP_UCODE_SIZE( warp_g400_tgzsa ) + - WARP_UCODE_SIZE( warp_g400_tgzsaf ) + - WARP_UCODE_SIZE( warp_g400_tgzsf ) + - WARP_UCODE_SIZE( warp_g400_t2gz ) + - WARP_UCODE_SIZE( warp_g400_t2gza ) + - WARP_UCODE_SIZE( warp_g400_t2gzaf ) + - WARP_UCODE_SIZE( warp_g400_t2gzf ) + - WARP_UCODE_SIZE( warp_g400_t2gzs ) + - WARP_UCODE_SIZE( warp_g400_t2gzsa ) + - WARP_UCODE_SIZE( warp_g400_t2gzsaf ) + - WARP_UCODE_SIZE( warp_g400_t2gzsf ) ); - - size = PAGE_ALIGN( size ); - - DRM_DEBUG( "G400 ucode size = %d bytes\n", size ); - return size; -} - -static unsigned int mga_warp_g200_microcode_size( drm_mga_private_t *dev_priv ) +static const unsigned int mga_warp_g400_microcode_size = + (WARP_UCODE_SIZE(warp_g400_tgz) + + WARP_UCODE_SIZE(warp_g400_tgza) + + WARP_UCODE_SIZE(warp_g400_tgzaf) + + WARP_UCODE_SIZE(warp_g400_tgzf) + + WARP_UCODE_SIZE(warp_g400_tgzs) + + WARP_UCODE_SIZE(warp_g400_tgzsa) + + WARP_UCODE_SIZE(warp_g400_tgzsaf) + + WARP_UCODE_SIZE(warp_g400_tgzsf) + + WARP_UCODE_SIZE(warp_g400_t2gz) + + WARP_UCODE_SIZE(warp_g400_t2gza) + + WARP_UCODE_SIZE(warp_g400_t2gzaf) + + WARP_UCODE_SIZE(warp_g400_t2gzf) + + WARP_UCODE_SIZE(warp_g400_t2gzs) + + WARP_UCODE_SIZE(warp_g400_t2gzsa) + + WARP_UCODE_SIZE(warp_g400_t2gzsaf) + + WARP_UCODE_SIZE(warp_g400_t2gzsf)); + +static const unsigned int mga_warp_g200_microcode_size = + (WARP_UCODE_SIZE(warp_g200_tgz) + + WARP_UCODE_SIZE(warp_g200_tgza) + + WARP_UCODE_SIZE(warp_g200_tgzaf) + + WARP_UCODE_SIZE(warp_g200_tgzf) + + WARP_UCODE_SIZE(warp_g200_tgzs) + + WARP_UCODE_SIZE(warp_g200_tgzsa) + + WARP_UCODE_SIZE(warp_g200_tgzsaf) + + WARP_UCODE_SIZE(warp_g200_tgzsf)); + + +unsigned int mga_warp_microcode_size(const drm_mga_private_t * dev_priv) { - unsigned int size; - - size = ( WARP_UCODE_SIZE( warp_g200_tgz ) + - WARP_UCODE_SIZE( warp_g200_tgza ) + - WARP_UCODE_SIZE( warp_g200_tgzaf ) + - WARP_UCODE_SIZE( warp_g200_tgzf ) + - WARP_UCODE_SIZE( warp_g200_tgzs ) + - WARP_UCODE_SIZE( warp_g200_tgzsa ) + - WARP_UCODE_SIZE( warp_g200_tgzsaf ) + - WARP_UCODE_SIZE( warp_g200_tgzsf ) ); - - size = PAGE_ALIGN( size ); - - DRM_DEBUG( "G200 ucode size = %d bytes\n", size ); - return size; + switch (dev_priv->chipset) { + case MGA_CARD_TYPE_G400: + case MGA_CARD_TYPE_G550: + return PAGE_ALIGN(mga_warp_g400_microcode_size); + case MGA_CARD_TYPE_G200: + return PAGE_ALIGN(mga_warp_g200_microcode_size); + default: + return 0; + } } static int mga_warp_install_g400_microcode( drm_mga_private_t *dev_priv ) { unsigned char *vcbase = dev_priv->warp->handle; unsigned long pcbase = dev_priv->warp->offset; - unsigned int size; - - size = mga_warp_g400_microcode_size( dev_priv ); - if ( size > dev_priv->warp->size ) { - DRM_ERROR( "microcode too large! (%u > %lu)\n", - size, dev_priv->warp->size ); - return DRM_ERR(ENOMEM); - } memset( dev_priv->warp_pipe_phys, 0, sizeof(dev_priv->warp_pipe_phys) ); @@ -136,35 +123,36 @@ static int mga_warp_install_g200_microcode( drm_mga_private_t *dev_priv ) { unsigned char *vcbase = dev_priv->warp->handle; unsigned long pcbase = dev_priv->warp->offset; - unsigned int size; - - size = mga_warp_g200_microcode_size( dev_priv ); - if ( size > dev_priv->warp->size ) { - DRM_ERROR( "microcode too large! (%u > %lu)\n", - size, dev_priv->warp->size ); - return DRM_ERR(ENOMEM); - } - memset( dev_priv->warp_pipe_phys, 0, - sizeof(dev_priv->warp_pipe_phys) ); + memset(dev_priv->warp_pipe_phys, 0, sizeof(dev_priv->warp_pipe_phys)); - WARP_UCODE_INSTALL( warp_g200_tgz, MGA_WARP_TGZ ); - WARP_UCODE_INSTALL( warp_g200_tgzf, MGA_WARP_TGZF ); - WARP_UCODE_INSTALL( warp_g200_tgza, MGA_WARP_TGZA ); - WARP_UCODE_INSTALL( warp_g200_tgzaf, MGA_WARP_TGZAF ); - WARP_UCODE_INSTALL( warp_g200_tgzs, MGA_WARP_TGZS ); - WARP_UCODE_INSTALL( warp_g200_tgzsf, MGA_WARP_TGZSF ); - WARP_UCODE_INSTALL( warp_g200_tgzsa, MGA_WARP_TGZSA ); - WARP_UCODE_INSTALL( warp_g200_tgzsaf, MGA_WARP_TGZSAF ); + WARP_UCODE_INSTALL(warp_g200_tgz, MGA_WARP_TGZ); + WARP_UCODE_INSTALL(warp_g200_tgzf, MGA_WARP_TGZF); + WARP_UCODE_INSTALL(warp_g200_tgza, MGA_WARP_TGZA); + WARP_UCODE_INSTALL(warp_g200_tgzaf, MGA_WARP_TGZAF); + WARP_UCODE_INSTALL(warp_g200_tgzs, MGA_WARP_TGZS); + WARP_UCODE_INSTALL(warp_g200_tgzsf, MGA_WARP_TGZSF); + WARP_UCODE_INSTALL(warp_g200_tgzsa, MGA_WARP_TGZSA); + WARP_UCODE_INSTALL(warp_g200_tgzsaf, MGA_WARP_TGZSAF); return 0; } int mga_warp_install_microcode( drm_mga_private_t *dev_priv ) { - switch ( dev_priv->chipset ) { + const unsigned int size = mga_warp_microcode_size(dev_priv); + + DRM_DEBUG("MGA ucode size = %d bytes\n", size); + if (size > dev_priv->warp->size) { + DRM_ERROR("microcode too large! (%u > %lu)\n", + size, dev_priv->warp->size); + return DRM_ERR(ENOMEM); + } + + switch (dev_priv->chipset) { case MGA_CARD_TYPE_G400: - return mga_warp_install_g400_microcode( dev_priv ); + case MGA_CARD_TYPE_G550: + return mga_warp_install_g400_microcode(dev_priv); case MGA_CARD_TYPE_G200: return mga_warp_install_g200_microcode( dev_priv ); default: @@ -182,10 +170,11 @@ int mga_warp_init( drm_mga_private_t *dev_priv ) */ switch ( dev_priv->chipset ) { case MGA_CARD_TYPE_G400: - MGA_WRITE( MGA_WIADDR2, MGA_WMODE_SUSPEND ); - MGA_WRITE( MGA_WGETMSB, 0x00000E00 ); - MGA_WRITE( MGA_WVRTXSZ, 0x00001807 ); - MGA_WRITE( MGA_WACCEPTSEQ, 0x18000000 ); + case MGA_CARD_TYPE_G550: + MGA_WRITE(MGA_WIADDR2, MGA_WMODE_SUSPEND); + MGA_WRITE(MGA_WGETMSB, 0x00000E00); + MGA_WRITE(MGA_WVRTXSZ, 0x00001807); + MGA_WRITE(MGA_WACCEPTSEQ, 0x18000000); break; case MGA_CARD_TYPE_G200: MGA_WRITE( MGA_WIADDR, MGA_WMODE_SUSPEND ); diff --git a/drivers/char/drm/r128_cce.c b/drivers/char/drm/r128_cce.c index 08ed8d01d9d9..895152206b31 100644 --- a/drivers/char/drm/r128_cce.c +++ b/drivers/char/drm/r128_cce.c @@ -326,7 +326,8 @@ static void r128_cce_init_ring_buffer( drm_device_t *dev, ring_start = dev_priv->cce_ring->offset - dev->agp->base; else #endif - ring_start = dev_priv->cce_ring->offset - dev->sg->handle; + ring_start = dev_priv->cce_ring->offset - + (unsigned long)dev->sg->virtual; R128_WRITE( R128_PM4_BUFFER_OFFSET, ring_start | R128_AGP_OFFSET ); @@ -487,6 +488,7 @@ static int r128_do_init_cce( drm_device_t *dev, drm_r128_init_t *init ) r128_do_cleanup_cce( dev ); return DRM_ERR(EINVAL); } + dev->agp_buffer_token = init->buffers_offset; dev->agp_buffer_map = drm_core_findmap(dev, init->buffers_offset); if(!dev->agp_buffer_map) { DRM_ERROR("could not find dma buffer region!\n"); @@ -537,7 +539,7 @@ static int r128_do_init_cce( drm_device_t *dev, drm_r128_init_t *init ) dev_priv->cce_buffers_offset = dev->agp->base; else #endif - dev_priv->cce_buffers_offset = dev->sg->handle; + dev_priv->cce_buffers_offset = (unsigned long)dev->sg->virtual; dev_priv->ring.start = (u32 *)dev_priv->cce_ring->handle; dev_priv->ring.end = ((u32 *)dev_priv->cce_ring->handle diff --git a/drivers/char/drm/r128_drm.h b/drivers/char/drm/r128_drm.h index 0cba17d1e0ff..b616cd3ed2cd 100644 --- a/drivers/char/drm/r128_drm.h +++ b/drivers/char/drm/r128_drm.h @@ -215,7 +215,7 @@ typedef struct drm_r128_sarea { #define DRM_IOCTL_R128_INDIRECT DRM_IOWR(DRM_COMMAND_BASE + DRM_R128_INDIRECT, drm_r128_indirect_t) #define DRM_IOCTL_R128_FULLSCREEN DRM_IOW( DRM_COMMAND_BASE + DRM_R128_FULLSCREEN, drm_r128_fullscreen_t) #define DRM_IOCTL_R128_CLEAR2 DRM_IOW( DRM_COMMAND_BASE + DRM_R128_CLEAR2, drm_r128_clear2_t) -#define DRM_IOCTL_R128_GETPARAM DRM_IOW( DRM_COMMAND_BASE + DRM_R128_GETPARAM, drm_r128_getparam_t) +#define DRM_IOCTL_R128_GETPARAM DRM_IOWR( DRM_COMMAND_BASE + DRM_R128_GETPARAM, drm_r128_getparam_t) #define DRM_IOCTL_R128_FLIP DRM_IO( DRM_COMMAND_BASE + DRM_R128_FLIP) typedef struct drm_r128_init { diff --git a/drivers/char/drm/r300_cmdbuf.c b/drivers/char/drm/r300_cmdbuf.c new file mode 100644 index 000000000000..623f1f460cb5 --- /dev/null +++ b/drivers/char/drm/r300_cmdbuf.c @@ -0,0 +1,801 @@ +/* r300_cmdbuf.c -- Command buffer emission for R300 -*- linux-c -*- + * + * Copyright (C) The Weather Channel, Inc. 2002. + * Copyright (C) 2004 Nicolai Haehnle. + * All Rights Reserved. + * + * The Weather Channel (TM) funded Tungsten Graphics to develop the + * initial release of the Radeon 8500 driver under the XFree86 license. + * This notice must be preserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Nicolai Haehnle <prefect_@gmx.net> + */ + +#include "drmP.h" +#include "drm.h" +#include "radeon_drm.h" +#include "radeon_drv.h" +#include "r300_reg.h" + + +#define R300_SIMULTANEOUS_CLIPRECTS 4 + +/* Values for R300_RE_CLIPRECT_CNTL depending on the number of cliprects + */ +static const int r300_cliprect_cntl[4] = { + 0xAAAA, + 0xEEEE, + 0xFEFE, + 0xFFFE +}; + + +/** + * Emit up to R300_SIMULTANEOUS_CLIPRECTS cliprects from the given command + * buffer, starting with index n. + */ +static int r300_emit_cliprects(drm_radeon_private_t* dev_priv, + drm_radeon_cmd_buffer_t* cmdbuf, + int n) +{ + drm_clip_rect_t box; + int nr; + int i; + RING_LOCALS; + + nr = cmdbuf->nbox - n; + if (nr > R300_SIMULTANEOUS_CLIPRECTS) + nr = R300_SIMULTANEOUS_CLIPRECTS; + + DRM_DEBUG("%i cliprects\n", nr); + + if (nr) { + BEGIN_RING(6 + nr*2); + OUT_RING( CP_PACKET0( R300_RE_CLIPRECT_TL_0, nr*2 - 1 ) ); + + for(i = 0; i < nr; ++i) { + if (DRM_COPY_FROM_USER_UNCHECKED(&box, &cmdbuf->boxes[n+i], sizeof(box))) { + DRM_ERROR("copy cliprect faulted\n"); + return DRM_ERR(EFAULT); + } + + box.x1 = (box.x1 + R300_CLIPRECT_OFFSET) & R300_CLIPRECT_MASK; + box.y1 = (box.y1 + R300_CLIPRECT_OFFSET) & R300_CLIPRECT_MASK; + box.x2 = (box.x2 + R300_CLIPRECT_OFFSET) & R300_CLIPRECT_MASK; + box.y2 = (box.y2 + R300_CLIPRECT_OFFSET) & R300_CLIPRECT_MASK; + + OUT_RING((box.x1 << R300_CLIPRECT_X_SHIFT) | + (box.y1 << R300_CLIPRECT_Y_SHIFT)); + OUT_RING((box.x2 << R300_CLIPRECT_X_SHIFT) | + (box.y2 << R300_CLIPRECT_Y_SHIFT)); + } + + OUT_RING_REG( R300_RE_CLIPRECT_CNTL, r300_cliprect_cntl[nr-1] ); + + /* TODO/SECURITY: Force scissors to a safe value, otherwise the + * client might be able to trample over memory. + * The impact should be very limited, but I'd rather be safe than + * sorry. + */ + OUT_RING( CP_PACKET0( R300_RE_SCISSORS_TL, 1 ) ); + OUT_RING( 0 ); + OUT_RING( R300_SCISSORS_X_MASK | R300_SCISSORS_Y_MASK ); + ADVANCE_RING(); + } else { + /* Why we allow zero cliprect rendering: + * There are some commands in a command buffer that must be submitted + * even when there are no cliprects, e.g. DMA buffer discard + * or state setting (though state setting could be avoided by + * simulating a loss of context). + * + * Now since the cmdbuf interface is so chaotic right now (and is + * bound to remain that way for a bit until things settle down), + * it is basically impossible to filter out the commands that are + * necessary and those that aren't. + * + * So I choose the safe way and don't do any filtering at all; + * instead, I simply set up the engine so that all rendering + * can't produce any fragments. + */ + BEGIN_RING(2); + OUT_RING_REG( R300_RE_CLIPRECT_CNTL, 0 ); + ADVANCE_RING(); + } + + return 0; +} + +u8 r300_reg_flags[0x10000>>2]; + + +void r300_init_reg_flags(void) +{ + int i; + memset(r300_reg_flags, 0, 0x10000>>2); + #define ADD_RANGE_MARK(reg, count,mark) \ + for(i=((reg)>>2);i<((reg)>>2)+(count);i++)\ + r300_reg_flags[i]|=(mark); + + #define MARK_SAFE 1 + #define MARK_CHECK_OFFSET 2 + + #define ADD_RANGE(reg, count) ADD_RANGE_MARK(reg, count, MARK_SAFE) + + /* these match cmducs() command in r300_driver/r300/r300_cmdbuf.c */ + ADD_RANGE(R300_SE_VPORT_XSCALE, 6); + ADD_RANGE(0x2080, 1); + ADD_RANGE(R300_SE_VTE_CNTL, 2); + ADD_RANGE(0x2134, 2); + ADD_RANGE(0x2140, 1); + ADD_RANGE(R300_VAP_INPUT_CNTL_0, 2); + ADD_RANGE(0x21DC, 1); + ADD_RANGE(0x221C, 1); + ADD_RANGE(0x2220, 4); + ADD_RANGE(0x2288, 1); + ADD_RANGE(R300_VAP_OUTPUT_VTX_FMT_0, 2); + ADD_RANGE(R300_VAP_PVS_CNTL_1, 3); + ADD_RANGE(R300_GB_ENABLE, 1); + ADD_RANGE(R300_GB_MSPOS0, 5); + ADD_RANGE(R300_TX_ENABLE, 1); + ADD_RANGE(0x4200, 4); + ADD_RANGE(0x4214, 1); + ADD_RANGE(R300_RE_POINTSIZE, 1); + ADD_RANGE(0x4230, 3); + ADD_RANGE(R300_RE_LINE_CNT, 1); + ADD_RANGE(0x4238, 1); + ADD_RANGE(0x4260, 3); + ADD_RANGE(0x4274, 4); + ADD_RANGE(0x4288, 5); + ADD_RANGE(0x42A0, 1); + ADD_RANGE(R300_RE_ZBIAS_T_FACTOR, 4); + ADD_RANGE(0x42B4, 1); + ADD_RANGE(R300_RE_CULL_CNTL, 1); + ADD_RANGE(0x42C0, 2); + ADD_RANGE(R300_RS_CNTL_0, 2); + ADD_RANGE(R300_RS_INTERP_0, 8); + ADD_RANGE(R300_RS_ROUTE_0, 8); + ADD_RANGE(0x43A4, 2); + ADD_RANGE(0x43E8, 1); + ADD_RANGE(R300_PFS_CNTL_0, 3); + ADD_RANGE(R300_PFS_NODE_0, 4); + ADD_RANGE(R300_PFS_TEXI_0, 64); + ADD_RANGE(0x46A4, 5); + ADD_RANGE(R300_PFS_INSTR0_0, 64); + ADD_RANGE(R300_PFS_INSTR1_0, 64); + ADD_RANGE(R300_PFS_INSTR2_0, 64); + ADD_RANGE(R300_PFS_INSTR3_0, 64); + ADD_RANGE(0x4BC0, 1); + ADD_RANGE(0x4BC8, 3); + ADD_RANGE(R300_PP_ALPHA_TEST, 2); + ADD_RANGE(0x4BD8, 1); + ADD_RANGE(R300_PFS_PARAM_0_X, 64); + ADD_RANGE(0x4E00, 1); + ADD_RANGE(R300_RB3D_CBLEND, 2); + ADD_RANGE(R300_RB3D_COLORMASK, 1); + ADD_RANGE(0x4E10, 3); + ADD_RANGE_MARK(R300_RB3D_COLOROFFSET0, 1, MARK_CHECK_OFFSET); /* check offset */ + ADD_RANGE(R300_RB3D_COLORPITCH0, 1); + ADD_RANGE(0x4E50, 9); + ADD_RANGE(0x4E88, 1); + ADD_RANGE(0x4EA0, 2); + ADD_RANGE(R300_RB3D_ZSTENCIL_CNTL_0, 3); + ADD_RANGE(0x4F10, 4); + ADD_RANGE_MARK(R300_RB3D_DEPTHOFFSET, 1, MARK_CHECK_OFFSET); /* check offset */ + ADD_RANGE(R300_RB3D_DEPTHPITCH, 1); + ADD_RANGE(0x4F28, 1); + ADD_RANGE(0x4F30, 2); + ADD_RANGE(0x4F44, 1); + ADD_RANGE(0x4F54, 1); + + ADD_RANGE(R300_TX_FILTER_0, 16); + ADD_RANGE(R300_TX_UNK1_0, 16); + ADD_RANGE(R300_TX_SIZE_0, 16); + ADD_RANGE(R300_TX_FORMAT_0, 16); + /* Texture offset is dangerous and needs more checking */ + ADD_RANGE_MARK(R300_TX_OFFSET_0, 16, MARK_CHECK_OFFSET); + ADD_RANGE(R300_TX_UNK4_0, 16); + ADD_RANGE(R300_TX_BORDER_COLOR_0, 16); + + /* Sporadic registers used as primitives are emitted */ + ADD_RANGE(0x4f18, 1); + ADD_RANGE(R300_RB3D_DSTCACHE_CTLSTAT, 1); + ADD_RANGE(R300_VAP_INPUT_ROUTE_0_0, 8); + ADD_RANGE(R300_VAP_INPUT_ROUTE_1_0, 8); + +} + +static __inline__ int r300_check_range(unsigned reg, int count) +{ + int i; + if(reg & ~0xffff)return -1; + for(i=(reg>>2);i<(reg>>2)+count;i++) + if(r300_reg_flags[i]!=MARK_SAFE)return 1; + return 0; +} + + /* we expect offsets passed to the framebuffer to be either within video memory or + within AGP space */ +static __inline__ int r300_check_offset(drm_radeon_private_t* dev_priv, u32 offset) +{ + /* we realy want to check against end of video aperture + but this value is not being kept. + This code is correct for now (does the same thing as the + code that sets MC_FB_LOCATION) in radeon_cp.c */ + if((offset>=dev_priv->fb_location) && + (offset<dev_priv->gart_vm_start))return 0; + if((offset>=dev_priv->gart_vm_start) && + (offset<dev_priv->gart_vm_start+dev_priv->gart_size))return 0; + return 1; +} + +static __inline__ int r300_emit_carefully_checked_packet0(drm_radeon_private_t* dev_priv, + drm_radeon_cmd_buffer_t* cmdbuf, + drm_r300_cmd_header_t header) +{ + int reg; + int sz; + int i; + int values[64]; + RING_LOCALS; + + sz = header.packet0.count; + reg = (header.packet0.reghi << 8) | header.packet0.reglo; + + if((sz>64)||(sz<0)){ + DRM_ERROR("Cannot emit more than 64 values at a time (reg=%04x sz=%d)\n", reg, sz); + return DRM_ERR(EINVAL); + } + for(i=0;i<sz;i++){ + values[i]=((int __user*)cmdbuf->buf)[i]; + switch(r300_reg_flags[(reg>>2)+i]){ + case MARK_SAFE: + break; + case MARK_CHECK_OFFSET: + if(r300_check_offset(dev_priv, (u32)values[i])){ + DRM_ERROR("Offset failed range check (reg=%04x sz=%d)\n", reg, sz); + return DRM_ERR(EINVAL); + } + break; + default: + DRM_ERROR("Register %04x failed check as flag=%02x\n", reg+i*4, r300_reg_flags[(reg>>2)+i]); + return DRM_ERR(EINVAL); + } + } + + BEGIN_RING(1+sz); + OUT_RING( CP_PACKET0( reg, sz-1 ) ); + OUT_RING_TABLE( values, sz ); + ADVANCE_RING(); + + cmdbuf->buf += sz*4; + cmdbuf->bufsz -= sz*4; + + return 0; +} + +/** + * Emits a packet0 setting arbitrary registers. + * Called by r300_do_cp_cmdbuf. + * + * Note that checks are performed on contents and addresses of the registers + */ +static __inline__ int r300_emit_packet0(drm_radeon_private_t* dev_priv, + drm_radeon_cmd_buffer_t* cmdbuf, + drm_r300_cmd_header_t header) +{ + int reg; + int sz; + RING_LOCALS; + + sz = header.packet0.count; + reg = (header.packet0.reghi << 8) | header.packet0.reglo; + + if (!sz) + return 0; + + if (sz*4 > cmdbuf->bufsz) + return DRM_ERR(EINVAL); + + if (reg+sz*4 >= 0x10000){ + DRM_ERROR("No such registers in hardware reg=%04x sz=%d\n", reg, sz); + return DRM_ERR(EINVAL); + } + + if(r300_check_range(reg, sz)){ + /* go and check everything */ + return r300_emit_carefully_checked_packet0(dev_priv, cmdbuf, header); + } + /* the rest of the data is safe to emit, whatever the values the user passed */ + + BEGIN_RING(1+sz); + OUT_RING( CP_PACKET0( reg, sz-1 ) ); + OUT_RING_TABLE( (int __user*)cmdbuf->buf, sz ); + ADVANCE_RING(); + + cmdbuf->buf += sz*4; + cmdbuf->bufsz -= sz*4; + + return 0; +} + + +/** + * Uploads user-supplied vertex program instructions or parameters onto + * the graphics card. + * Called by r300_do_cp_cmdbuf. + */ +static __inline__ int r300_emit_vpu(drm_radeon_private_t* dev_priv, + drm_radeon_cmd_buffer_t* cmdbuf, + drm_r300_cmd_header_t header) +{ + int sz; + int addr; + RING_LOCALS; + + sz = header.vpu.count; + addr = (header.vpu.adrhi << 8) | header.vpu.adrlo; + + if (!sz) + return 0; + if (sz*16 > cmdbuf->bufsz) + return DRM_ERR(EINVAL); + + BEGIN_RING(5+sz*4); + /* Wait for VAP to come to senses.. */ + /* there is no need to emit it multiple times, (only once before VAP is programmed, + but this optimization is for later */ + OUT_RING_REG( R300_VAP_PVS_WAITIDLE, 0 ); + OUT_RING_REG( R300_VAP_PVS_UPLOAD_ADDRESS, addr ); + OUT_RING( CP_PACKET0_TABLE( R300_VAP_PVS_UPLOAD_DATA, sz*4 - 1 ) ); + OUT_RING_TABLE( (int __user*)cmdbuf->buf, sz*4 ); + + ADVANCE_RING(); + + cmdbuf->buf += sz*16; + cmdbuf->bufsz -= sz*16; + + return 0; +} + + +/** + * Emit a clear packet from userspace. + * Called by r300_emit_packet3. + */ +static __inline__ int r300_emit_clear(drm_radeon_private_t* dev_priv, + drm_radeon_cmd_buffer_t* cmdbuf) +{ + RING_LOCALS; + + if (8*4 > cmdbuf->bufsz) + return DRM_ERR(EINVAL); + + BEGIN_RING(10); + OUT_RING( CP_PACKET3( R200_3D_DRAW_IMMD_2, 8 ) ); + OUT_RING( R300_PRIM_TYPE_POINT|R300_PRIM_WALK_RING| + (1<<R300_PRIM_NUM_VERTICES_SHIFT) ); + OUT_RING_TABLE( (int __user*)cmdbuf->buf, 8 ); + ADVANCE_RING(); + + cmdbuf->buf += 8*4; + cmdbuf->bufsz -= 8*4; + + return 0; +} + +static __inline__ int r300_emit_3d_load_vbpntr(drm_radeon_private_t* dev_priv, + drm_radeon_cmd_buffer_t* cmdbuf, + u32 header) +{ + int count, i,k; + #define MAX_ARRAY_PACKET 64 + u32 payload[MAX_ARRAY_PACKET]; + u32 narrays; + RING_LOCALS; + + count=(header>>16) & 0x3fff; + + if((count+1)>MAX_ARRAY_PACKET){ + DRM_ERROR("Too large payload in 3D_LOAD_VBPNTR (count=%d)\n", count); + return DRM_ERR(EINVAL); + } + memset(payload, 0, MAX_ARRAY_PACKET*4); + memcpy(payload, cmdbuf->buf+4, (count+1)*4); + + /* carefully check packet contents */ + + narrays=payload[0]; + k=0; + i=1; + while((k<narrays) && (i<(count+1))){ + i++; /* skip attribute field */ + if(r300_check_offset(dev_priv, payload[i])){ + DRM_ERROR("Offset failed range check (k=%d i=%d) while processing 3D_LOAD_VBPNTR packet.\n", k, i); + return DRM_ERR(EINVAL); + } + k++; + i++; + if(k==narrays)break; + /* have one more to process, they come in pairs */ + if(r300_check_offset(dev_priv, payload[i])){ + DRM_ERROR("Offset failed range check (k=%d i=%d) while processing 3D_LOAD_VBPNTR packet.\n", k, i); + return DRM_ERR(EINVAL); + } + k++; + i++; + } + /* do the counts match what we expect ? */ + if((k!=narrays) || (i!=(count+1))){ + DRM_ERROR("Malformed 3D_LOAD_VBPNTR packet (k=%d i=%d narrays=%d count+1=%d).\n", k, i, narrays, count+1); + return DRM_ERR(EINVAL); + } + + /* all clear, output packet */ + + BEGIN_RING(count+2); + OUT_RING(header); + OUT_RING_TABLE(payload, count+1); + ADVANCE_RING(); + + cmdbuf->buf += (count+2)*4; + cmdbuf->bufsz -= (count+2)*4; + + return 0; +} + +static __inline__ int r300_emit_raw_packet3(drm_radeon_private_t* dev_priv, + drm_radeon_cmd_buffer_t* cmdbuf) +{ + u32 header; + int count; + RING_LOCALS; + + if (4 > cmdbuf->bufsz) + return DRM_ERR(EINVAL); + + /* Fixme !! This simply emits a packet without much checking. + We need to be smarter. */ + + /* obtain first word - actual packet3 header */ + header = *(u32 __user*)cmdbuf->buf; + + /* Is it packet 3 ? */ + if( (header>>30)!=0x3 ) { + DRM_ERROR("Not a packet3 header (0x%08x)\n", header); + return DRM_ERR(EINVAL); + } + + count=(header>>16) & 0x3fff; + + /* Check again now that we know how much data to expect */ + if ((count+2)*4 > cmdbuf->bufsz){ + DRM_ERROR("Expected packet3 of length %d but have only %d bytes left\n", + (count+2)*4, cmdbuf->bufsz); + return DRM_ERR(EINVAL); + } + + /* Is it a packet type we know about ? */ + switch(header & 0xff00){ + case RADEON_3D_LOAD_VBPNTR: /* load vertex array pointers */ + return r300_emit_3d_load_vbpntr(dev_priv, cmdbuf, header); + + case RADEON_CP_3D_DRAW_IMMD_2: /* triggers drawing using in-packet vertex data */ + case RADEON_CP_3D_DRAW_VBUF_2: /* triggers drawing of vertex buffers setup elsewhere */ + case RADEON_CP_3D_DRAW_INDX_2: /* triggers drawing using indices to vertex buffer */ + case RADEON_CP_INDX_BUFFER: /* DRAW_INDX_2 without INDX_BUFFER seems to lock up the gpu */ + case RADEON_WAIT_FOR_IDLE: + case RADEON_CP_NOP: + /* these packets are safe */ + break; + default: + DRM_ERROR("Unknown packet3 header (0x%08x)\n", header); + return DRM_ERR(EINVAL); + } + + + BEGIN_RING(count+2); + OUT_RING(header); + OUT_RING_TABLE( (int __user*)(cmdbuf->buf+4), count+1); + ADVANCE_RING(); + + cmdbuf->buf += (count+2)*4; + cmdbuf->bufsz -= (count+2)*4; + + return 0; +} + + +/** + * Emit a rendering packet3 from userspace. + * Called by r300_do_cp_cmdbuf. + */ +static __inline__ int r300_emit_packet3(drm_radeon_private_t* dev_priv, + drm_radeon_cmd_buffer_t* cmdbuf, + drm_r300_cmd_header_t header) +{ + int n; + int ret; + char __user* orig_buf = cmdbuf->buf; + int orig_bufsz = cmdbuf->bufsz; + + /* This is a do-while-loop so that we run the interior at least once, + * even if cmdbuf->nbox is 0. Compare r300_emit_cliprects for rationale. + */ + n = 0; + do { + if (cmdbuf->nbox > R300_SIMULTANEOUS_CLIPRECTS) { + ret = r300_emit_cliprects(dev_priv, cmdbuf, n); + if (ret) + return ret; + + cmdbuf->buf = orig_buf; + cmdbuf->bufsz = orig_bufsz; + } + + switch(header.packet3.packet) { + case R300_CMD_PACKET3_CLEAR: + DRM_DEBUG("R300_CMD_PACKET3_CLEAR\n"); + ret = r300_emit_clear(dev_priv, cmdbuf); + if (ret) { + DRM_ERROR("r300_emit_clear failed\n"); + return ret; + } + break; + + case R300_CMD_PACKET3_RAW: + DRM_DEBUG("R300_CMD_PACKET3_RAW\n"); + ret = r300_emit_raw_packet3(dev_priv, cmdbuf); + if (ret) { + DRM_ERROR("r300_emit_raw_packet3 failed\n"); + return ret; + } + break; + + default: + DRM_ERROR("bad packet3 type %i at %p\n", + header.packet3.packet, + cmdbuf->buf - sizeof(header)); + return DRM_ERR(EINVAL); + } + + n += R300_SIMULTANEOUS_CLIPRECTS; + } while(n < cmdbuf->nbox); + + return 0; +} + +/* Some of the R300 chips seem to be extremely touchy about the two registers + * that are configured in r300_pacify. + * Among the worst offenders seems to be the R300 ND (0x4E44): When userspace + * sends a command buffer that contains only state setting commands and a + * vertex program/parameter upload sequence, this will eventually lead to a + * lockup, unless the sequence is bracketed by calls to r300_pacify. + * So we should take great care to *always* call r300_pacify before + * *anything* 3D related, and again afterwards. This is what the + * call bracket in r300_do_cp_cmdbuf is for. + */ + +/** + * Emit the sequence to pacify R300. + */ +static __inline__ void r300_pacify(drm_radeon_private_t* dev_priv) +{ + RING_LOCALS; + + BEGIN_RING(6); + OUT_RING( CP_PACKET0( R300_RB3D_DSTCACHE_CTLSTAT, 0 ) ); + OUT_RING( 0xa ); + OUT_RING( CP_PACKET0( 0x4f18, 0 ) ); + OUT_RING( 0x3 ); + OUT_RING( CP_PACKET3( RADEON_CP_NOP, 0 ) ); + OUT_RING( 0x0 ); + ADVANCE_RING(); +} + + +/** + * Called by r300_do_cp_cmdbuf to update the internal buffer age and state. + * The actual age emit is done by r300_do_cp_cmdbuf, which is why you must + * be careful about how this function is called. + */ +static void r300_discard_buffer(drm_device_t * dev, drm_buf_t * buf) +{ + drm_radeon_private_t *dev_priv = dev->dev_private; + drm_radeon_buf_priv_t *buf_priv = buf->dev_private; + + buf_priv->age = ++dev_priv->sarea_priv->last_dispatch; + buf->pending = 1; + buf->used = 0; +} + + +/** + * Parses and validates a user-supplied command buffer and emits appropriate + * commands on the DMA ring buffer. + * Called by the ioctl handler function radeon_cp_cmdbuf. + */ +int r300_do_cp_cmdbuf(drm_device_t* dev, + DRMFILE filp, + drm_file_t* filp_priv, + drm_radeon_cmd_buffer_t* cmdbuf) +{ + drm_radeon_private_t *dev_priv = dev->dev_private; + drm_device_dma_t *dma = dev->dma; + drm_buf_t *buf = NULL; + int emit_dispatch_age = 0; + int ret = 0; + + DRM_DEBUG("\n"); + + /* See the comment above r300_emit_begin3d for why this call must be here, + * and what the cleanup gotos are for. */ + r300_pacify(dev_priv); + + if (cmdbuf->nbox <= R300_SIMULTANEOUS_CLIPRECTS) { + ret = r300_emit_cliprects(dev_priv, cmdbuf, 0); + if (ret) + goto cleanup; + } + + while(cmdbuf->bufsz >= sizeof(drm_r300_cmd_header_t)) { + int idx; + drm_r300_cmd_header_t header; + + header.u = *(unsigned int *)cmdbuf->buf; + + cmdbuf->buf += sizeof(header); + cmdbuf->bufsz -= sizeof(header); + + switch(header.header.cmd_type) { + case R300_CMD_PACKET0: + DRM_DEBUG("R300_CMD_PACKET0\n"); + ret = r300_emit_packet0(dev_priv, cmdbuf, header); + if (ret) { + DRM_ERROR("r300_emit_packet0 failed\n"); + goto cleanup; + } + break; + + case R300_CMD_VPU: + DRM_DEBUG("R300_CMD_VPU\n"); + ret = r300_emit_vpu(dev_priv, cmdbuf, header); + if (ret) { + DRM_ERROR("r300_emit_vpu failed\n"); + goto cleanup; + } + break; + + case R300_CMD_PACKET3: + DRM_DEBUG("R300_CMD_PACKET3\n"); + ret = r300_emit_packet3(dev_priv, cmdbuf, header); + if (ret) { + DRM_ERROR("r300_emit_packet3 failed\n"); + goto cleanup; + } + break; + + case R300_CMD_END3D: + DRM_DEBUG("R300_CMD_END3D\n"); + /* TODO: + Ideally userspace driver should not need to issue this call, + i.e. the drm driver should issue it automatically and prevent + lockups. + + In practice, we do not understand why this call is needed and what + it does (except for some vague guesses that it has to do with cache + coherence) and so the user space driver does it. + + Once we are sure which uses prevent lockups the code could be moved + into the kernel and the userspace driver will not + need to use this command. + + Note that issuing this command does not hurt anything + except, possibly, performance */ + r300_pacify(dev_priv); + break; + + case R300_CMD_CP_DELAY: + /* simple enough, we can do it here */ + DRM_DEBUG("R300_CMD_CP_DELAY\n"); + { + int i; + RING_LOCALS; + + BEGIN_RING(header.delay.count); + for(i=0;i<header.delay.count;i++) + OUT_RING(RADEON_CP_PACKET2); + ADVANCE_RING(); + } + break; + + case R300_CMD_DMA_DISCARD: + DRM_DEBUG("RADEON_CMD_DMA_DISCARD\n"); + idx = header.dma.buf_idx; + if (idx < 0 || idx >= dma->buf_count) { + DRM_ERROR("buffer index %d (of %d max)\n", + idx, dma->buf_count - 1); + ret = DRM_ERR(EINVAL); + goto cleanup; + } + + buf = dma->buflist[idx]; + if (buf->filp != filp || buf->pending) { + DRM_ERROR("bad buffer %p %p %d\n", + buf->filp, filp, buf->pending); + ret = DRM_ERR(EINVAL); + goto cleanup; + } + + emit_dispatch_age = 1; + r300_discard_buffer(dev, buf); + break; + + case R300_CMD_WAIT: + /* simple enough, we can do it here */ + DRM_DEBUG("R300_CMD_WAIT\n"); + if(header.wait.flags==0)break; /* nothing to do */ + + { + RING_LOCALS; + + BEGIN_RING(2); + OUT_RING( CP_PACKET0( RADEON_WAIT_UNTIL, 0 ) ); + OUT_RING( (header.wait.flags & 0xf)<<14 ); + ADVANCE_RING(); + } + break; + + default: + DRM_ERROR("bad cmd_type %i at %p\n", + header.header.cmd_type, + cmdbuf->buf - sizeof(header)); + ret = DRM_ERR(EINVAL); + goto cleanup; + } + } + + DRM_DEBUG("END\n"); + +cleanup: + r300_pacify(dev_priv); + + /* We emit the vertex buffer age here, outside the pacifier "brackets" + * for two reasons: + * (1) This may coalesce multiple age emissions into a single one and + * (2) more importantly, some chips lock up hard when scratch registers + * are written inside the pacifier bracket. + */ + if (emit_dispatch_age) { + RING_LOCALS; + + /* Emit the vertex buffer age */ + BEGIN_RING(2); + RADEON_DISPATCH_AGE(dev_priv->sarea_priv->last_dispatch); + ADVANCE_RING(); + } + + COMMIT_RING(); + + return ret; +} + diff --git a/drivers/char/drm/r300_reg.h b/drivers/char/drm/r300_reg.h new file mode 100644 index 000000000000..c3e7ca3dbe3d --- /dev/null +++ b/drivers/char/drm/r300_reg.h @@ -0,0 +1,1412 @@ +/************************************************************************** + +Copyright (C) 2004-2005 Nicolai Haehnle et al. + +Permission is hereby granted, free of charge, to any person obtaining a +copy of this software and associated documentation files (the "Software"), +to deal in the Software without restriction, including without limitation +on the rights to use, copy, modify, merge, publish, distribute, sub +license, and/or sell copies of the Software, and to permit persons to whom +the Software is furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice (including the next +paragraph) shall be included in all copies or substantial portions of the +Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL +THE AUTHOR(S) AND/OR THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, +DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR +OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE +USE OR OTHER DEALINGS IN THE SOFTWARE. + +**************************************************************************/ + +#ifndef _R300_REG_H +#define _R300_REG_H + +#define R300_MC_INIT_MISC_LAT_TIMER 0x180 +# define R300_MC_MISC__MC_CPR_INIT_LAT_SHIFT 0 +# define R300_MC_MISC__MC_VF_INIT_LAT_SHIFT 4 +# define R300_MC_MISC__MC_DISP0R_INIT_LAT_SHIFT 8 +# define R300_MC_MISC__MC_DISP1R_INIT_LAT_SHIFT 12 +# define R300_MC_MISC__MC_FIXED_INIT_LAT_SHIFT 16 +# define R300_MC_MISC__MC_E2R_INIT_LAT_SHIFT 20 +# define R300_MC_MISC__MC_SAME_PAGE_PRIO_SHIFT 24 +# define R300_MC_MISC__MC_GLOBW_INIT_LAT_SHIFT 28 + + +#define R300_MC_INIT_GFX_LAT_TIMER 0x154 +# define R300_MC_MISC__MC_G3D0R_INIT_LAT_SHIFT 0 +# define R300_MC_MISC__MC_G3D1R_INIT_LAT_SHIFT 4 +# define R300_MC_MISC__MC_G3D2R_INIT_LAT_SHIFT 8 +# define R300_MC_MISC__MC_G3D3R_INIT_LAT_SHIFT 12 +# define R300_MC_MISC__MC_TX0R_INIT_LAT_SHIFT 16 +# define R300_MC_MISC__MC_TX1R_INIT_LAT_SHIFT 20 +# define R300_MC_MISC__MC_GLOBR_INIT_LAT_SHIFT 24 +# define R300_MC_MISC__MC_GLOBW_FULL_LAT_SHIFT 28 + +/* +This file contains registers and constants for the R300. They have been +found mostly by examining command buffers captured using glxtest, as well +as by extrapolating some known registers and constants from the R200. + +I am fairly certain that they are correct unless stated otherwise in comments. +*/ + +#define R300_SE_VPORT_XSCALE 0x1D98 +#define R300_SE_VPORT_XOFFSET 0x1D9C +#define R300_SE_VPORT_YSCALE 0x1DA0 +#define R300_SE_VPORT_YOFFSET 0x1DA4 +#define R300_SE_VPORT_ZSCALE 0x1DA8 +#define R300_SE_VPORT_ZOFFSET 0x1DAC + + +/* This register is written directly and also starts data section in many 3d CP_PACKET3's */ +#define R300_VAP_VF_CNTL 0x2084 + +# define R300_VAP_VF_CNTL__PRIM_TYPE__SHIFT 0 +# define R300_VAP_VF_CNTL__PRIM_NONE (0<<0) +# define R300_VAP_VF_CNTL__PRIM_POINTS (1<<0) +# define R300_VAP_VF_CNTL__PRIM_LINES (2<<0) +# define R300_VAP_VF_CNTL__PRIM_LINE_STRIP (3<<0) +# define R300_VAP_VF_CNTL__PRIM_TRIANGLES (4<<0) +# define R300_VAP_VF_CNTL__PRIM_TRIANGLE_FAN (5<<0) +# define R300_VAP_VF_CNTL__PRIM_TRIANGLE_STRIP (6<<0) +# define R300_VAP_VF_CNTL__PRIM_LINE_LOOP (12<<0) +# define R300_VAP_VF_CNTL__PRIM_QUADS (13<<0) +# define R300_VAP_VF_CNTL__PRIM_QUAD_STRIP (14<<0) +# define R300_VAP_VF_CNTL__PRIM_POLYGON (15<<0) + +# define R300_VAP_VF_CNTL__PRIM_WALK__SHIFT 4 + /* State based - direct writes to registers trigger vertex generation */ +# define R300_VAP_VF_CNTL__PRIM_WALK_STATE_BASED (0<<4) +# define R300_VAP_VF_CNTL__PRIM_WALK_INDICES (1<<4) +# define R300_VAP_VF_CNTL__PRIM_WALK_VERTEX_LIST (2<<4) +# define R300_VAP_VF_CNTL__PRIM_WALK_VERTEX_EMBEDDED (3<<4) + + /* I don't think I saw these three used.. */ +# define R300_VAP_VF_CNTL__COLOR_ORDER__SHIFT 6 +# define R300_VAP_VF_CNTL__TCL_OUTPUT_CTL_ENA__SHIFT 9 +# define R300_VAP_VF_CNTL__PROG_STREAM_ENA__SHIFT 10 + + /* index size - when not set the indices are assumed to be 16 bit */ +# define R300_VAP_VF_CNTL__INDEX_SIZE_32bit (1<<11) + /* number of vertices */ +# define R300_VAP_VF_CNTL__NUM_VERTICES__SHIFT 16 + +/* BEGIN: Wild guesses */ +#define R300_VAP_OUTPUT_VTX_FMT_0 0x2090 +# define R300_VAP_OUTPUT_VTX_FMT_0__POS_PRESENT (1<<0) +# define R300_VAP_OUTPUT_VTX_FMT_0__COLOR_PRESENT (1<<1) +# define R300_VAP_OUTPUT_VTX_FMT_0__COLOR_1_PRESENT (1<<2) /* GUESS */ +# define R300_VAP_OUTPUT_VTX_FMT_0__COLOR_2_PRESENT (1<<3) /* GUESS */ +# define R300_VAP_OUTPUT_VTX_FMT_0__COLOR_3_PRESENT (1<<4) /* GUESS */ +# define R300_VAP_OUTPUT_VTX_FMT_0__PT_SIZE_PRESENT (1<<16) /* GUESS */ + +#define R300_VAP_OUTPUT_VTX_FMT_1 0x2094 +# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_0_COMP_CNT_SHIFT 0 +# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_1_COMP_CNT_SHIFT 3 +# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_2_COMP_CNT_SHIFT 6 +# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_3_COMP_CNT_SHIFT 9 +# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_4_COMP_CNT_SHIFT 12 +# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_5_COMP_CNT_SHIFT 15 +# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_6_COMP_CNT_SHIFT 18 +# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_7_COMP_CNT_SHIFT 21 +/* END */ + +#define R300_SE_VTE_CNTL 0x20b0 +# define R300_VPORT_X_SCALE_ENA 0x00000001 +# define R300_VPORT_X_OFFSET_ENA 0x00000002 +# define R300_VPORT_Y_SCALE_ENA 0x00000004 +# define R300_VPORT_Y_OFFSET_ENA 0x00000008 +# define R300_VPORT_Z_SCALE_ENA 0x00000010 +# define R300_VPORT_Z_OFFSET_ENA 0x00000020 +# define R300_VTX_XY_FMT 0x00000100 +# define R300_VTX_Z_FMT 0x00000200 +# define R300_VTX_W0_FMT 0x00000400 +# define R300_VTX_W0_NORMALIZE 0x00000800 +# define R300_VTX_ST_DENORMALIZED 0x00001000 + +/* BEGIN: Vertex data assembly - lots of uncertainties */ +/* gap */ +/* Where do we get our vertex data? +// +// Vertex data either comes either from immediate mode registers or from +// vertex arrays. +// There appears to be no mixed mode (though we can force the pitch of +// vertex arrays to 0, effectively reusing the same element over and over +// again). +// +// Immediate mode is controlled by the INPUT_CNTL registers. I am not sure +// if these registers influence vertex array processing. +// +// Vertex arrays are controlled via the 3D_LOAD_VBPNTR packet3. +// +// In both cases, vertex attributes are then passed through INPUT_ROUTE. + +// Beginning with INPUT_ROUTE_0_0 is a list of WORDs that route vertex data +// into the vertex processor's input registers. +// The first word routes the first input, the second word the second, etc. +// The corresponding input is routed into the register with the given index. +// The list is ended by a word with INPUT_ROUTE_END set. +// +// Always set COMPONENTS_4 in immediate mode. */ + +#define R300_VAP_INPUT_ROUTE_0_0 0x2150 +# define R300_INPUT_ROUTE_COMPONENTS_1 (0 << 0) +# define R300_INPUT_ROUTE_COMPONENTS_2 (1 << 0) +# define R300_INPUT_ROUTE_COMPONENTS_3 (2 << 0) +# define R300_INPUT_ROUTE_COMPONENTS_4 (3 << 0) +# define R300_INPUT_ROUTE_COMPONENTS_RGBA (4 << 0) /* GUESS */ +# define R300_VAP_INPUT_ROUTE_IDX_SHIFT 8 +# define R300_VAP_INPUT_ROUTE_IDX_MASK (31 << 8) /* GUESS */ +# define R300_VAP_INPUT_ROUTE_END (1 << 13) +# define R300_INPUT_ROUTE_IMMEDIATE_MODE (0 << 14) /* GUESS */ +# define R300_INPUT_ROUTE_FLOAT (1 << 14) /* GUESS */ +# define R300_INPUT_ROUTE_UNSIGNED_BYTE (2 << 14) /* GUESS */ +# define R300_INPUT_ROUTE_FLOAT_COLOR (3 << 14) /* GUESS */ +#define R300_VAP_INPUT_ROUTE_0_1 0x2154 +#define R300_VAP_INPUT_ROUTE_0_2 0x2158 +#define R300_VAP_INPUT_ROUTE_0_3 0x215C +#define R300_VAP_INPUT_ROUTE_0_4 0x2160 +#define R300_VAP_INPUT_ROUTE_0_5 0x2164 +#define R300_VAP_INPUT_ROUTE_0_6 0x2168 +#define R300_VAP_INPUT_ROUTE_0_7 0x216C + +/* gap */ +/* Notes: +// - always set up to produce at least two attributes: +// if vertex program uses only position, fglrx will set normal, too +// - INPUT_CNTL_0_COLOR and INPUT_CNTL_COLOR bits are always equal */ +#define R300_VAP_INPUT_CNTL_0 0x2180 +# define R300_INPUT_CNTL_0_COLOR 0x00000001 +#define R300_VAP_INPUT_CNTL_1 0x2184 +# define R300_INPUT_CNTL_POS 0x00000001 +# define R300_INPUT_CNTL_NORMAL 0x00000002 +# define R300_INPUT_CNTL_COLOR 0x00000004 +# define R300_INPUT_CNTL_TC0 0x00000400 +# define R300_INPUT_CNTL_TC1 0x00000800 +# define R300_INPUT_CNTL_TC2 0x00001000 /* GUESS */ +# define R300_INPUT_CNTL_TC3 0x00002000 /* GUESS */ +# define R300_INPUT_CNTL_TC4 0x00004000 /* GUESS */ +# define R300_INPUT_CNTL_TC5 0x00008000 /* GUESS */ +# define R300_INPUT_CNTL_TC6 0x00010000 /* GUESS */ +# define R300_INPUT_CNTL_TC7 0x00020000 /* GUESS */ + +/* gap */ +/* Words parallel to INPUT_ROUTE_0; All words that are active in INPUT_ROUTE_0 +// are set to a swizzling bit pattern, other words are 0. +// +// In immediate mode, the pattern is always set to xyzw. In vertex array +// mode, the swizzling pattern is e.g. used to set zw components in texture +// coordinates with only tweo components. */ +#define R300_VAP_INPUT_ROUTE_1_0 0x21E0 +# define R300_INPUT_ROUTE_SELECT_X 0 +# define R300_INPUT_ROUTE_SELECT_Y 1 +# define R300_INPUT_ROUTE_SELECT_Z 2 +# define R300_INPUT_ROUTE_SELECT_W 3 +# define R300_INPUT_ROUTE_SELECT_ZERO 4 +# define R300_INPUT_ROUTE_SELECT_ONE 5 +# define R300_INPUT_ROUTE_SELECT_MASK 7 +# define R300_INPUT_ROUTE_X_SHIFT 0 +# define R300_INPUT_ROUTE_Y_SHIFT 3 +# define R300_INPUT_ROUTE_Z_SHIFT 6 +# define R300_INPUT_ROUTE_W_SHIFT 9 +# define R300_INPUT_ROUTE_ENABLE (15 << 12) +#define R300_VAP_INPUT_ROUTE_1_1 0x21E4 +#define R300_VAP_INPUT_ROUTE_1_2 0x21E8 +#define R300_VAP_INPUT_ROUTE_1_3 0x21EC +#define R300_VAP_INPUT_ROUTE_1_4 0x21F0 +#define R300_VAP_INPUT_ROUTE_1_5 0x21F4 +#define R300_VAP_INPUT_ROUTE_1_6 0x21F8 +#define R300_VAP_INPUT_ROUTE_1_7 0x21FC + +/* END */ + +/* gap */ +/* BEGIN: Upload vertex program and data +// The programmable vertex shader unit has a memory bank of unknown size +// that can be written to in 16 byte units by writing the address into +// UPLOAD_ADDRESS, followed by data in UPLOAD_DATA (multiples of 4 DWORDs). +// +// Pointers into the memory bank are always in multiples of 16 bytes. +// +// The memory bank is divided into areas with fixed meaning. +// +// Starting at address UPLOAD_PROGRAM: Vertex program instructions. +// Native limits reported by drivers from ATI suggest size 256 (i.e. 4KB), +// whereas the difference between known addresses suggests size 512. +// +// Starting at address UPLOAD_PARAMETERS: Vertex program parameters. +// Native reported limits and the VPI layout suggest size 256, whereas +// difference between known addresses suggests size 512. +// +// At address UPLOAD_POINTSIZE is a vector (0, 0, ps, 0), where ps is the +// floating point pointsize. The exact purpose of this state is uncertain, +// as there is also the R300_RE_POINTSIZE register. +// +// Multiple vertex programs and parameter sets can be loaded at once, +// which could explain the size discrepancy. */ +#define R300_VAP_PVS_UPLOAD_ADDRESS 0x2200 +# define R300_PVS_UPLOAD_PROGRAM 0x00000000 +# define R300_PVS_UPLOAD_PARAMETERS 0x00000200 +# define R300_PVS_UPLOAD_POINTSIZE 0x00000406 +/* gap */ +#define R300_VAP_PVS_UPLOAD_DATA 0x2208 +/* END */ + +/* gap */ +/* I do not know the purpose of this register. However, I do know that +// it is set to 221C_CLEAR for clear operations and to 221C_NORMAL +// for normal rendering. */ +#define R300_VAP_UNKNOWN_221C 0x221C +# define R300_221C_NORMAL 0x00000000 +# define R300_221C_CLEAR 0x0001C000 + +/* gap */ +/* Sometimes, END_OF_PKT and 0x2284=0 are the only commands sent between +// rendering commands and overwriting vertex program parameters. +// Therefore, I suspect writing zero to 0x2284 synchronizes the engine and +// avoids bugs caused by still running shaders reading bad data from memory. */ +#define R300_VAP_PVS_WAITIDLE 0x2284 /* GUESS */ + +/* Absolutely no clue what this register is about. */ +#define R300_VAP_UNKNOWN_2288 0x2288 +# define R300_2288_R300 0x00750000 /* -- nh */ +# define R300_2288_RV350 0x0000FFFF /* -- Vladimir */ + +/* gap */ +/* Addresses are relative to the vertex program instruction area of the +// memory bank. PROGRAM_END points to the last instruction of the active +// program +// +// The meaning of the two UNKNOWN fields is obviously not known. However, +// experiments so far have shown that both *must* point to an instruction +// inside the vertex program, otherwise the GPU locks up. +// fglrx usually sets CNTL_3_UNKNOWN to the end of the program and +// CNTL_1_UNKNOWN points to instruction where last write to position takes place. +// Most likely this is used to ignore rest of the program in cases where group of verts arent visible. +// For some reason this "section" is sometimes accepted other instruction that have +// no relationship with position calculations. +*/ +#define R300_VAP_PVS_CNTL_1 0x22D0 +# define R300_PVS_CNTL_1_PROGRAM_START_SHIFT 0 +# define R300_PVS_CNTL_1_POS_END_SHIFT 10 +# define R300_PVS_CNTL_1_PROGRAM_END_SHIFT 20 +/* Addresses are relative the the vertex program parameters area. */ +#define R300_VAP_PVS_CNTL_2 0x22D4 +# define R300_PVS_CNTL_2_PARAM_OFFSET_SHIFT 0 +# define R300_PVS_CNTL_2_PARAM_COUNT_SHIFT 16 +#define R300_VAP_PVS_CNTL_3 0x22D8 +# define R300_PVS_CNTL_3_PROGRAM_UNKNOWN_SHIFT 10 +# define R300_PVS_CNTL_3_PROGRAM_UNKNOWN2_SHIFT 0 + +/* The entire range from 0x2300 to 0x2AC inclusive seems to be used for +// immediate vertices */ +#define R300_VAP_VTX_COLOR_R 0x2464 +#define R300_VAP_VTX_COLOR_G 0x2468 +#define R300_VAP_VTX_COLOR_B 0x246C +#define R300_VAP_VTX_POS_0_X_1 0x2490 /* used for glVertex2*() */ +#define R300_VAP_VTX_POS_0_Y_1 0x2494 +#define R300_VAP_VTX_COLOR_PKD 0x249C /* RGBA */ +#define R300_VAP_VTX_POS_0_X_2 0x24A0 /* used for glVertex3*() */ +#define R300_VAP_VTX_POS_0_Y_2 0x24A4 +#define R300_VAP_VTX_POS_0_Z_2 0x24A8 +#define R300_VAP_VTX_END_OF_PKT 0x24AC /* write 0 to indicate end of packet? */ + +/* gap */ + +/* These are values from r300_reg/r300_reg.h - they are known to be correct + and are here so we can use one register file instead of several + - Vladimir */ +#define R300_GB_VAP_RASTER_VTX_FMT_0 0x4000 +# define R300_GB_VAP_RASTER_VTX_FMT_0__POS_PRESENT (1<<0) +# define R300_GB_VAP_RASTER_VTX_FMT_0__COLOR_0_PRESENT (1<<1) +# define R300_GB_VAP_RASTER_VTX_FMT_0__COLOR_1_PRESENT (1<<2) +# define R300_GB_VAP_RASTER_VTX_FMT_0__COLOR_2_PRESENT (1<<3) +# define R300_GB_VAP_RASTER_VTX_FMT_0__COLOR_3_PRESENT (1<<4) +# define R300_GB_VAP_RASTER_VTX_FMT_0__COLOR_SPACE (0xf<<5) +# define R300_GB_VAP_RASTER_VTX_FMT_0__PT_SIZE_PRESENT (0x1<<16) + +#define R300_GB_VAP_RASTER_VTX_FMT_1 0x4004 + /* each of the following is 3 bits wide, specifies number + of components */ +# define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_0_COMP_CNT_SHIFT 0 +# define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_1_COMP_CNT_SHIFT 3 +# define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_2_COMP_CNT_SHIFT 6 +# define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_3_COMP_CNT_SHIFT 9 +# define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_4_COMP_CNT_SHIFT 12 +# define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_5_COMP_CNT_SHIFT 15 +# define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_6_COMP_CNT_SHIFT 18 +# define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_7_COMP_CNT_SHIFT 21 + +/* UNK30 seems to enables point to quad transformation on textures + (or something closely related to that). + This bit is rather fatal at the time being due to lackings at pixel shader side */ +#define R300_GB_ENABLE 0x4008 +# define R300_GB_POINT_STUFF_ENABLE (1<<0) +# define R300_GB_LINE_STUFF_ENABLE (1<<1) +# define R300_GB_TRIANGLE_STUFF_ENABLE (1<<2) +# define R300_GB_STENCIL_AUTO_ENABLE (1<<4) +# define R300_GB_UNK30 (1<<30) + /* each of the following is 2 bits wide */ +#define R300_GB_TEX_REPLICATE 0 +#define R300_GB_TEX_ST 1 +#define R300_GB_TEX_STR 2 +# define R300_GB_TEX0_SOURCE_SHIFT 16 +# define R300_GB_TEX1_SOURCE_SHIFT 18 +# define R300_GB_TEX2_SOURCE_SHIFT 20 +# define R300_GB_TEX3_SOURCE_SHIFT 22 +# define R300_GB_TEX4_SOURCE_SHIFT 24 +# define R300_GB_TEX5_SOURCE_SHIFT 26 +# define R300_GB_TEX6_SOURCE_SHIFT 28 +# define R300_GB_TEX7_SOURCE_SHIFT 30 + +/* MSPOS - positions for multisample antialiasing (?) */ +#define R300_GB_MSPOS0 0x4010 + /* shifts - each of the fields is 4 bits */ +# define R300_GB_MSPOS0__MS_X0_SHIFT 0 +# define R300_GB_MSPOS0__MS_Y0_SHIFT 4 +# define R300_GB_MSPOS0__MS_X1_SHIFT 8 +# define R300_GB_MSPOS0__MS_Y1_SHIFT 12 +# define R300_GB_MSPOS0__MS_X2_SHIFT 16 +# define R300_GB_MSPOS0__MS_Y2_SHIFT 20 +# define R300_GB_MSPOS0__MSBD0_Y 24 +# define R300_GB_MSPOS0__MSBD0_X 28 + +#define R300_GB_MSPOS1 0x4014 +# define R300_GB_MSPOS1__MS_X3_SHIFT 0 +# define R300_GB_MSPOS1__MS_Y3_SHIFT 4 +# define R300_GB_MSPOS1__MS_X4_SHIFT 8 +# define R300_GB_MSPOS1__MS_Y4_SHIFT 12 +# define R300_GB_MSPOS1__MS_X5_SHIFT 16 +# define R300_GB_MSPOS1__MS_Y5_SHIFT 20 +# define R300_GB_MSPOS1__MSBD1 24 + + +#define R300_GB_TILE_CONFIG 0x4018 +# define R300_GB_TILE_ENABLE (1<<0) +# define R300_GB_TILE_PIPE_COUNT_RV300 0 +# define R300_GB_TILE_PIPE_COUNT_R300 (3<<1) +# define R300_GB_TILE_PIPE_COUNT_R420 (7<<1) +# define R300_GB_TILE_SIZE_8 0 +# define R300_GB_TILE_SIZE_16 (1<<4) +# define R300_GB_TILE_SIZE_32 (2<<4) +# define R300_GB_SUPER_SIZE_1 (0<<6) +# define R300_GB_SUPER_SIZE_2 (1<<6) +# define R300_GB_SUPER_SIZE_4 (2<<6) +# define R300_GB_SUPER_SIZE_8 (3<<6) +# define R300_GB_SUPER_SIZE_16 (4<<6) +# define R300_GB_SUPER_SIZE_32 (5<<6) +# define R300_GB_SUPER_SIZE_64 (6<<6) +# define R300_GB_SUPER_SIZE_128 (7<<6) +# define R300_GB_SUPER_X_SHIFT 9 /* 3 bits wide */ +# define R300_GB_SUPER_Y_SHIFT 12 /* 3 bits wide */ +# define R300_GB_SUPER_TILE_A 0 +# define R300_GB_SUPER_TILE_B (1<<15) +# define R300_GB_SUBPIXEL_1_12 0 +# define R300_GB_SUBPIXEL_1_16 (1<<16) + +#define R300_GB_FIFO_SIZE 0x4024 + /* each of the following is 2 bits wide */ +#define R300_GB_FIFO_SIZE_32 0 +#define R300_GB_FIFO_SIZE_64 1 +#define R300_GB_FIFO_SIZE_128 2 +#define R300_GB_FIFO_SIZE_256 3 +# define R300_SC_IFIFO_SIZE_SHIFT 0 +# define R300_SC_TZFIFO_SIZE_SHIFT 2 +# define R300_SC_BFIFO_SIZE_SHIFT 4 + +# define R300_US_OFIFO_SIZE_SHIFT 12 +# define R300_US_WFIFO_SIZE_SHIFT 14 + /* the following use the same constants as above, but meaning is + is times 2 (i.e. instead of 32 words it means 64 */ +# define R300_RS_TFIFO_SIZE_SHIFT 6 +# define R300_RS_CFIFO_SIZE_SHIFT 8 +# define R300_US_RAM_SIZE_SHIFT 10 + /* watermarks, 3 bits wide */ +# define R300_RS_HIGHWATER_COL_SHIFT 16 +# define R300_RS_HIGHWATER_TEX_SHIFT 19 +# define R300_OFIFO_HIGHWATER_SHIFT 22 /* two bits only */ +# define R300_CUBE_FIFO_HIGHWATER_COL_SHIFT 24 + +#define R300_GB_SELECT 0x401C +# define R300_GB_FOG_SELECT_C0A 0 +# define R300_GB_FOG_SELECT_C1A 1 +# define R300_GB_FOG_SELECT_C2A 2 +# define R300_GB_FOG_SELECT_C3A 3 +# define R300_GB_FOG_SELECT_1_1_W 4 +# define R300_GB_FOG_SELECT_Z 5 +# define R300_GB_DEPTH_SELECT_Z 0 +# define R300_GB_DEPTH_SELECT_1_1_W (1<<3) +# define R300_GB_W_SELECT_1_W 0 +# define R300_GB_W_SELECT_1 (1<<4) + +#define R300_GB_AA_CONFIG 0x4020 +# define R300_AA_ENABLE 0x01 +# define R300_AA_SUBSAMPLES_2 0 +# define R300_AA_SUBSAMPLES_3 (1<<1) +# define R300_AA_SUBSAMPLES_4 (2<<1) +# define R300_AA_SUBSAMPLES_6 (3<<1) + +/* END */ + +/* gap */ +/* The upper enable bits are guessed, based on fglrx reported limits. */ +#define R300_TX_ENABLE 0x4104 +# define R300_TX_ENABLE_0 (1 << 0) +# define R300_TX_ENABLE_1 (1 << 1) +# define R300_TX_ENABLE_2 (1 << 2) +# define R300_TX_ENABLE_3 (1 << 3) +# define R300_TX_ENABLE_4 (1 << 4) +# define R300_TX_ENABLE_5 (1 << 5) +# define R300_TX_ENABLE_6 (1 << 6) +# define R300_TX_ENABLE_7 (1 << 7) +# define R300_TX_ENABLE_8 (1 << 8) +# define R300_TX_ENABLE_9 (1 << 9) +# define R300_TX_ENABLE_10 (1 << 10) +# define R300_TX_ENABLE_11 (1 << 11) +# define R300_TX_ENABLE_12 (1 << 12) +# define R300_TX_ENABLE_13 (1 << 13) +# define R300_TX_ENABLE_14 (1 << 14) +# define R300_TX_ENABLE_15 (1 << 15) + +/* The pointsize is given in multiples of 6. The pointsize can be +// enormous: Clear() renders a single point that fills the entire +// framebuffer. */ +#define R300_RE_POINTSIZE 0x421C +# define R300_POINTSIZE_Y_SHIFT 0 +# define R300_POINTSIZE_Y_MASK (0xFFFF << 0) /* GUESS */ +# define R300_POINTSIZE_X_SHIFT 16 +# define R300_POINTSIZE_X_MASK (0xFFFF << 16) /* GUESS */ +# define R300_POINTSIZE_MAX (R300_POINTSIZE_Y_MASK / 6) + +/* The line width is given in multiples of 6. + In default mode lines are classified as vertical lines. + HO: horizontal + VE: vertical or horizontal + HO & VE: no classification +*/ +#define R300_RE_LINE_CNT 0x4234 +# define R300_LINESIZE_SHIFT 0 +# define R300_LINESIZE_MASK (0xFFFF << 0) /* GUESS */ +# define R300_LINESIZE_MAX (R300_LINESIZE_MASK / 6) +# define R300_LINE_CNT_HO (1 << 16) +# define R300_LINE_CNT_VE (1 << 17) + +/* Some sort of scale or clamp value for texcoordless textures. */ +#define R300_RE_UNK4238 0x4238 + +#define R300_RE_SHADE_MODEL 0x4278 +# define R300_RE_SHADE_MODEL_SMOOTH 0x3aaaa +# define R300_RE_SHADE_MODEL_FLAT 0x39595 + +/* Dangerous */ +#define R300_RE_POLYGON_MODE 0x4288 +# define R300_PM_ENABLED (1 << 0) +# define R300_PM_FRONT_POINT (0 << 0) +# define R300_PM_BACK_POINT (0 << 0) +# define R300_PM_FRONT_LINE (1 << 4) +# define R300_PM_FRONT_FILL (1 << 5) +# define R300_PM_BACK_LINE (1 << 7) +# define R300_PM_BACK_FILL (1 << 8) + +/* Not sure why there are duplicate of factor and constant values. + My best guess so far is that there are seperate zbiases for test and write. + Ordering might be wrong. + Some of the tests indicate that fgl has a fallback implementation of zbias + via pixel shaders. */ +#define R300_RE_ZBIAS_T_FACTOR 0x42A4 +#define R300_RE_ZBIAS_T_CONSTANT 0x42A8 +#define R300_RE_ZBIAS_W_FACTOR 0x42AC +#define R300_RE_ZBIAS_W_CONSTANT 0x42B0 + +/* This register needs to be set to (1<<1) for RV350 to correctly + perform depth test (see --vb-triangles in r300_demo) + Don't know about other chips. - Vladimir + This is set to 3 when GL_POLYGON_OFFSET_FILL is on. + My guess is that there are two bits for each zbias primitive (FILL, LINE, POINT). + One to enable depth test and one for depth write. + Yet this doesnt explain why depth writes work ... + */ +#define R300_RE_OCCLUSION_CNTL 0x42B4 +# define R300_OCCLUSION_ON (1<<1) + +#define R300_RE_CULL_CNTL 0x42B8 +# define R300_CULL_FRONT (1 << 0) +# define R300_CULL_BACK (1 << 1) +# define R300_FRONT_FACE_CCW (0 << 2) +# define R300_FRONT_FACE_CW (1 << 2) + + +/* BEGIN: Rasterization / Interpolators - many guesses +// 0_UNKNOWN_18 has always been set except for clear operations. +// TC_CNT is the number of incoming texture coordinate sets (i.e. it depends +// on the vertex program, *not* the fragment program) */ +#define R300_RS_CNTL_0 0x4300 +# define R300_RS_CNTL_TC_CNT_SHIFT 2 +# define R300_RS_CNTL_TC_CNT_MASK (7 << 2) +# define R300_RS_CNTL_CI_CNT_SHIFT 7 /* number of color interpolators used */ +# define R300_RS_CNTL_0_UNKNOWN_18 (1 << 18) +/* Guess: RS_CNTL_1 holds the index of the highest used RS_ROUTE_n register. */ +#define R300_RS_CNTL_1 0x4304 + +/* gap */ +/* Only used for texture coordinates. +// Use the source field to route texture coordinate input from the vertex program +// to the desired interpolator. Note that the source field is relative to the +// outputs the vertex program *actually* writes. If a vertex program only writes +// texcoord[1], this will be source index 0. +// Set INTERP_USED on all interpolators that produce data used by the +// fragment program. INTERP_USED looks like a swizzling mask, but +// I haven't seen it used that way. +// +// Note: The _UNKNOWN constants are always set in their respective register. +// I don't know if this is necessary. */ +#define R300_RS_INTERP_0 0x4310 +#define R300_RS_INTERP_1 0x4314 +# define R300_RS_INTERP_1_UNKNOWN 0x40 +#define R300_RS_INTERP_2 0x4318 +# define R300_RS_INTERP_2_UNKNOWN 0x80 +#define R300_RS_INTERP_3 0x431C +# define R300_RS_INTERP_3_UNKNOWN 0xC0 +#define R300_RS_INTERP_4 0x4320 +#define R300_RS_INTERP_5 0x4324 +#define R300_RS_INTERP_6 0x4328 +#define R300_RS_INTERP_7 0x432C +# define R300_RS_INTERP_SRC_SHIFT 2 +# define R300_RS_INTERP_SRC_MASK (7 << 2) +# define R300_RS_INTERP_USED 0x00D10000 + +/* These DWORDs control how vertex data is routed into fragment program +// registers, after interpolators. */ +#define R300_RS_ROUTE_0 0x4330 +#define R300_RS_ROUTE_1 0x4334 +#define R300_RS_ROUTE_2 0x4338 +#define R300_RS_ROUTE_3 0x433C /* GUESS */ +#define R300_RS_ROUTE_4 0x4340 /* GUESS */ +#define R300_RS_ROUTE_5 0x4344 /* GUESS */ +#define R300_RS_ROUTE_6 0x4348 /* GUESS */ +#define R300_RS_ROUTE_7 0x434C /* GUESS */ +# define R300_RS_ROUTE_SOURCE_INTERP_0 0 +# define R300_RS_ROUTE_SOURCE_INTERP_1 1 +# define R300_RS_ROUTE_SOURCE_INTERP_2 2 +# define R300_RS_ROUTE_SOURCE_INTERP_3 3 +# define R300_RS_ROUTE_SOURCE_INTERP_4 4 +# define R300_RS_ROUTE_SOURCE_INTERP_5 5 /* GUESS */ +# define R300_RS_ROUTE_SOURCE_INTERP_6 6 /* GUESS */ +# define R300_RS_ROUTE_SOURCE_INTERP_7 7 /* GUESS */ +# define R300_RS_ROUTE_ENABLE (1 << 3) /* GUESS */ +# define R300_RS_ROUTE_DEST_SHIFT 6 +# define R300_RS_ROUTE_DEST_MASK (31 << 6) /* GUESS */ + +/* Special handling for color: When the fragment program uses color, +// the ROUTE_0_COLOR bit is set and ROUTE_0_COLOR_DEST contains the +// color register index. */ +# define R300_RS_ROUTE_0_COLOR (1 << 14) +# define R300_RS_ROUTE_0_COLOR_DEST_SHIFT 17 +# define R300_RS_ROUTE_0_COLOR_DEST_MASK (31 << 17) /* GUESS */ +/* As above, but for secondary color */ +# define R300_RS_ROUTE_1_COLOR1 (1 << 14) +# define R300_RS_ROUTE_1_COLOR1_DEST_SHIFT 17 +# define R300_RS_ROUTE_1_COLOR1_DEST_MASK (31 << 17) +# define R300_RS_ROUTE_1_UNKNOWN11 (1 << 11) +/* END */ + +/* BEGIN: Scissors and cliprects +// There are four clipping rectangles. Their corner coordinates are inclusive. +// Every pixel is assigned a number from 0 and 15 by setting bits 0-3 depending +// on whether the pixel is inside cliprects 0-3, respectively. For example, +// if a pixel is inside cliprects 0 and 1, but outside 2 and 3, it is assigned +// the number 3 (binary 0011). +// Iff the bit corresponding to the pixel's number in RE_CLIPRECT_CNTL is set, +// the pixel is rasterized. +// +// In addition to this, there is a scissors rectangle. Only pixels inside the +// scissors rectangle are drawn. (coordinates are inclusive) +// +// For some reason, the top-left corner of the framebuffer is at (1440, 1440) +// for the purpose of clipping and scissors. */ +#define R300_RE_CLIPRECT_TL_0 0x43B0 +#define R300_RE_CLIPRECT_BR_0 0x43B4 +#define R300_RE_CLIPRECT_TL_1 0x43B8 +#define R300_RE_CLIPRECT_BR_1 0x43BC +#define R300_RE_CLIPRECT_TL_2 0x43C0 +#define R300_RE_CLIPRECT_BR_2 0x43C4 +#define R300_RE_CLIPRECT_TL_3 0x43C8 +#define R300_RE_CLIPRECT_BR_3 0x43CC +# define R300_CLIPRECT_OFFSET 1440 +# define R300_CLIPRECT_MASK 0x1FFF +# define R300_CLIPRECT_X_SHIFT 0 +# define R300_CLIPRECT_X_MASK (0x1FFF << 0) +# define R300_CLIPRECT_Y_SHIFT 13 +# define R300_CLIPRECT_Y_MASK (0x1FFF << 13) +#define R300_RE_CLIPRECT_CNTL 0x43D0 +# define R300_CLIP_OUT (1 << 0) +# define R300_CLIP_0 (1 << 1) +# define R300_CLIP_1 (1 << 2) +# define R300_CLIP_10 (1 << 3) +# define R300_CLIP_2 (1 << 4) +# define R300_CLIP_20 (1 << 5) +# define R300_CLIP_21 (1 << 6) +# define R300_CLIP_210 (1 << 7) +# define R300_CLIP_3 (1 << 8) +# define R300_CLIP_30 (1 << 9) +# define R300_CLIP_31 (1 << 10) +# define R300_CLIP_310 (1 << 11) +# define R300_CLIP_32 (1 << 12) +# define R300_CLIP_320 (1 << 13) +# define R300_CLIP_321 (1 << 14) +# define R300_CLIP_3210 (1 << 15) + +/* gap */ +#define R300_RE_SCISSORS_TL 0x43E0 +#define R300_RE_SCISSORS_BR 0x43E4 +# define R300_SCISSORS_OFFSET 1440 +# define R300_SCISSORS_X_SHIFT 0 +# define R300_SCISSORS_X_MASK (0x1FFF << 0) +# define R300_SCISSORS_Y_SHIFT 13 +# define R300_SCISSORS_Y_MASK (0x1FFF << 13) +/* END */ + +/* BEGIN: Texture specification +// The texture specification dwords are grouped by meaning and not by texture unit. +// This means that e.g. the offset for texture image unit N is found in register +// TX_OFFSET_0 + (4*N) */ +#define R300_TX_FILTER_0 0x4400 +# define R300_TX_REPEAT 0 +# define R300_TX_MIRRORED 1 +# define R300_TX_CLAMP 4 +# define R300_TX_CLAMP_TO_EDGE 2 +# define R300_TX_CLAMP_TO_BORDER 6 +# define R300_TX_WRAP_S_SHIFT 0 +# define R300_TX_WRAP_S_MASK (7 << 0) +# define R300_TX_WRAP_T_SHIFT 3 +# define R300_TX_WRAP_T_MASK (7 << 3) +# define R300_TX_WRAP_Q_SHIFT 6 +# define R300_TX_WRAP_Q_MASK (7 << 6) +# define R300_TX_MAG_FILTER_NEAREST (1 << 9) +# define R300_TX_MAG_FILTER_LINEAR (2 << 9) +# define R300_TX_MAG_FILTER_MASK (3 << 9) +# define R300_TX_MIN_FILTER_NEAREST (1 << 11) +# define R300_TX_MIN_FILTER_LINEAR (2 << 11) +# define R300_TX_MIN_FILTER_NEAREST_MIP_NEAREST (5 << 11) +# define R300_TX_MIN_FILTER_NEAREST_MIP_LINEAR (9 << 11) +# define R300_TX_MIN_FILTER_LINEAR_MIP_NEAREST (6 << 11) +# define R300_TX_MIN_FILTER_LINEAR_MIP_LINEAR (10 << 11) + +/* NOTE: NEAREST doesnt seem to exist. + Im not seting MAG_FILTER_MASK and (3 << 11) on for all + anisotropy modes because that would void selected mag filter */ +# define R300_TX_MIN_FILTER_ANISO_NEAREST ((0 << 13) /*|R300_TX_MAG_FILTER_MASK|(3<<11)*/) +# define R300_TX_MIN_FILTER_ANISO_LINEAR ((0 << 13) /*|R300_TX_MAG_FILTER_MASK|(3<<11)*/) +# define R300_TX_MIN_FILTER_ANISO_NEAREST_MIP_NEAREST ((1 << 13) /*|R300_TX_MAG_FILTER_MASK|(3<<11)*/) +# define R300_TX_MIN_FILTER_ANISO_NEAREST_MIP_LINEAR ((2 << 13) /*|R300_TX_MAG_FILTER_MASK|(3<<11)*/) +# define R300_TX_MIN_FILTER_MASK ( (15 << 11) | (3 << 13) ) +# define R300_TX_MAX_ANISO_1_TO_1 (0 << 21) +# define R300_TX_MAX_ANISO_2_TO_1 (2 << 21) +# define R300_TX_MAX_ANISO_4_TO_1 (4 << 21) +# define R300_TX_MAX_ANISO_8_TO_1 (6 << 21) +# define R300_TX_MAX_ANISO_16_TO_1 (8 << 21) +# define R300_TX_MAX_ANISO_MASK (14 << 21) + +#define R300_TX_UNK1_0 0x4440 +# define R300_LOD_BIAS_MASK 0x1fff + +#define R300_TX_SIZE_0 0x4480 +# define R300_TX_WIDTHMASK_SHIFT 0 +# define R300_TX_WIDTHMASK_MASK (2047 << 0) +# define R300_TX_HEIGHTMASK_SHIFT 11 +# define R300_TX_HEIGHTMASK_MASK (2047 << 11) +# define R300_TX_UNK23 (1 << 23) +# define R300_TX_SIZE_SHIFT 26 /* largest of width, height */ +# define R300_TX_SIZE_MASK (15 << 26) +#define R300_TX_FORMAT_0 0x44C0 + /* The interpretation of the format word by Wladimir van der Laan */ + /* The X, Y, Z and W refer to the layout of the components. + They are given meanings as R, G, B and Alpha by the swizzle + specification */ +# define R300_TX_FORMAT_X8 0x0 +# define R300_TX_FORMAT_X16 0x1 +# define R300_TX_FORMAT_Y4X4 0x2 +# define R300_TX_FORMAT_Y8X8 0x3 +# define R300_TX_FORMAT_Y16X16 0x4 +# define R300_TX_FORMAT_Z3Y3X2 0x5 +# define R300_TX_FORMAT_Z5Y6X5 0x6 +# define R300_TX_FORMAT_Z6Y5X5 0x7 +# define R300_TX_FORMAT_Z11Y11X10 0x8 +# define R300_TX_FORMAT_Z10Y11X11 0x9 +# define R300_TX_FORMAT_W4Z4Y4X4 0xA +# define R300_TX_FORMAT_W1Z5Y5X5 0xB +# define R300_TX_FORMAT_W8Z8Y8X8 0xC +# define R300_TX_FORMAT_W2Z10Y10X10 0xD +# define R300_TX_FORMAT_W16Z16Y16X16 0xE +# define R300_TX_FORMAT_DXT1 0xF +# define R300_TX_FORMAT_DXT3 0x10 +# define R300_TX_FORMAT_DXT5 0x11 +# define R300_TX_FORMAT_D3DMFT_CxV8U8 0x12 /* no swizzle */ +# define R300_TX_FORMAT_A8R8G8B8 0x13 /* no swizzle */ +# define R300_TX_FORMAT_B8G8_B8G8 0x14 /* no swizzle */ +# define R300_TX_FORMAT_G8R8_G8B8 0x15 /* no swizzle */ + /* 0x16 - some 16 bit green format.. ?? */ +# define R300_TX_FORMAT_UNK25 (1 << 25) /* no swizzle */ + + /* gap */ + /* Floating point formats */ + /* Note - hardware supports both 16 and 32 bit floating point */ +# define R300_TX_FORMAT_FL_I16 0x18 +# define R300_TX_FORMAT_FL_I16A16 0x19 +# define R300_TX_FORMAT_FL_R16G16B16A16 0x1A +# define R300_TX_FORMAT_FL_I32 0x1B +# define R300_TX_FORMAT_FL_I32A32 0x1C +# define R300_TX_FORMAT_FL_R32G32B32A32 0x1D + /* alpha modes, convenience mostly */ + /* if you have alpha, pick constant appropriate to the + number of channels (1 for I8, 2 for I8A8, 4 for R8G8B8A8, etc */ +# define R300_TX_FORMAT_ALPHA_1CH 0x000 +# define R300_TX_FORMAT_ALPHA_2CH 0x200 +# define R300_TX_FORMAT_ALPHA_4CH 0x600 +# define R300_TX_FORMAT_ALPHA_NONE 0xA00 + /* Swizzling */ + /* constants */ +# define R300_TX_FORMAT_X 0 +# define R300_TX_FORMAT_Y 1 +# define R300_TX_FORMAT_Z 2 +# define R300_TX_FORMAT_W 3 +# define R300_TX_FORMAT_ZERO 4 +# define R300_TX_FORMAT_ONE 5 +# define R300_TX_FORMAT_CUT_Z 6 /* 2.0*Z, everything above 1.0 is set to 0.0 */ +# define R300_TX_FORMAT_CUT_W 7 /* 2.0*W, everything above 1.0 is set to 0.0 */ + +# define R300_TX_FORMAT_B_SHIFT 18 +# define R300_TX_FORMAT_G_SHIFT 15 +# define R300_TX_FORMAT_R_SHIFT 12 +# define R300_TX_FORMAT_A_SHIFT 9 + /* Convenience macro to take care of layout and swizzling */ +# define R300_EASY_TX_FORMAT(B, G, R, A, FMT) (\ + ((R300_TX_FORMAT_##B)<<R300_TX_FORMAT_B_SHIFT) \ + | ((R300_TX_FORMAT_##G)<<R300_TX_FORMAT_G_SHIFT) \ + | ((R300_TX_FORMAT_##R)<<R300_TX_FORMAT_R_SHIFT) \ + | ((R300_TX_FORMAT_##A)<<R300_TX_FORMAT_A_SHIFT) \ + | (R300_TX_FORMAT_##FMT) \ + ) + /* These can be ORed with result of R300_EASY_TX_FORMAT() */ + /* We don't really know what they do. Take values from a constant color ? */ +# define R300_TX_FORMAT_CONST_X (1<<5) +# define R300_TX_FORMAT_CONST_Y (2<<5) +# define R300_TX_FORMAT_CONST_Z (4<<5) +# define R300_TX_FORMAT_CONST_W (8<<5) + +# define R300_TX_FORMAT_YUV_MODE 0x00800000 + +#define R300_TX_OFFSET_0 0x4540 +/* BEGIN: Guess from R200 */ +# define R300_TXO_ENDIAN_NO_SWAP (0 << 0) +# define R300_TXO_ENDIAN_BYTE_SWAP (1 << 0) +# define R300_TXO_ENDIAN_WORD_SWAP (2 << 0) +# define R300_TXO_ENDIAN_HALFDW_SWAP (3 << 0) +# define R300_TXO_OFFSET_MASK 0xffffffe0 +# define R300_TXO_OFFSET_SHIFT 5 +/* END */ +#define R300_TX_UNK4_0 0x4580 +#define R300_TX_BORDER_COLOR_0 0x45C0 //ff00ff00 == { 0, 1.0, 0, 1.0 } + +/* END */ + +/* BEGIN: Fragment program instruction set +// Fragment programs are written directly into register space. +// There are separate instruction streams for texture instructions and ALU +// instructions. +// In order to synchronize these streams, the program is divided into up +// to 4 nodes. Each node begins with a number of TEX operations, followed +// by a number of ALU operations. +// The first node can have zero TEX ops, all subsequent nodes must have at least +// one TEX ops. +// All nodes must have at least one ALU op. +// +// The index of the last node is stored in PFS_CNTL_0: A value of 0 means +// 1 node, a value of 3 means 4 nodes. +// The total amount of instructions is defined in PFS_CNTL_2. The offsets are +// offsets into the respective instruction streams, while *_END points to the +// last instruction relative to this offset. */ +#define R300_PFS_CNTL_0 0x4600 +# define R300_PFS_CNTL_LAST_NODES_SHIFT 0 +# define R300_PFS_CNTL_LAST_NODES_MASK (3 << 0) +# define R300_PFS_CNTL_FIRST_NODE_HAS_TEX (1 << 3) +#define R300_PFS_CNTL_1 0x4604 +/* There is an unshifted value here which has so far always been equal to the +// index of the highest used temporary register. */ +#define R300_PFS_CNTL_2 0x4608 +# define R300_PFS_CNTL_ALU_OFFSET_SHIFT 0 +# define R300_PFS_CNTL_ALU_OFFSET_MASK (63 << 0) +# define R300_PFS_CNTL_ALU_END_SHIFT 6 +# define R300_PFS_CNTL_ALU_END_MASK (63 << 0) +# define R300_PFS_CNTL_TEX_OFFSET_SHIFT 12 +# define R300_PFS_CNTL_TEX_OFFSET_MASK (31 << 12) /* GUESS */ +# define R300_PFS_CNTL_TEX_END_SHIFT 18 +# define R300_PFS_CNTL_TEX_END_MASK (31 << 18) /* GUESS */ + +/* gap */ +/* Nodes are stored backwards. The last active node is always stored in +// PFS_NODE_3. +// Example: In a 2-node program, NODE_0 and NODE_1 are set to 0. The +// first node is stored in NODE_2, the second node is stored in NODE_3. +// +// Offsets are relative to the master offset from PFS_CNTL_2. +// LAST_NODE is set for the last node, and only for the last node. */ +#define R300_PFS_NODE_0 0x4610 +#define R300_PFS_NODE_1 0x4614 +#define R300_PFS_NODE_2 0x4618 +#define R300_PFS_NODE_3 0x461C +# define R300_PFS_NODE_ALU_OFFSET_SHIFT 0 +# define R300_PFS_NODE_ALU_OFFSET_MASK (63 << 0) +# define R300_PFS_NODE_ALU_END_SHIFT 6 +# define R300_PFS_NODE_ALU_END_MASK (63 << 6) +# define R300_PFS_NODE_TEX_OFFSET_SHIFT 12 +# define R300_PFS_NODE_TEX_OFFSET_MASK (31 << 12) +# define R300_PFS_NODE_TEX_END_SHIFT 17 +# define R300_PFS_NODE_TEX_END_MASK (31 << 17) +# define R300_PFS_NODE_LAST_NODE (1 << 22) + +/* TEX +// As far as I can tell, texture instructions cannot write into output +// registers directly. A subsequent ALU instruction is always necessary, +// even if it's just MAD o0, r0, 1, 0 */ +#define R300_PFS_TEXI_0 0x4620 +# define R300_FPITX_SRC_SHIFT 0 +# define R300_FPITX_SRC_MASK (31 << 0) +# define R300_FPITX_SRC_CONST (1 << 5) /* GUESS */ +# define R300_FPITX_DST_SHIFT 6 +# define R300_FPITX_DST_MASK (31 << 6) +# define R300_FPITX_IMAGE_SHIFT 11 +# define R300_FPITX_IMAGE_MASK (15 << 11) /* GUESS based on layout and native limits */ +/* Unsure if these are opcodes, or some kind of bitfield, but this is how + * they were set when I checked + */ +# define R300_FPITX_OPCODE_SHIFT 15 +# define R300_FPITX_OP_TEX 1 +# define R300_FPITX_OP_TXP 3 +# define R300_FPITX_OP_TXB 4 + +/* ALU +// The ALU instructions register blocks are enumerated according to the order +// in which fglrx. I assume there is space for 64 instructions, since +// each block has space for a maximum of 64 DWORDs, and this matches reported +// native limits. +// +// The basic functional block seems to be one MAD for each color and alpha, +// and an adder that adds all components after the MUL. +// - ADD, MUL, MAD etc.: use MAD with appropriate neutral operands +// - DP4: Use OUTC_DP4, OUTA_DP4 +// - DP3: Use OUTC_DP3, OUTA_DP4, appropriate alpha operands +// - DPH: Use OUTC_DP4, OUTA_DP4, appropriate alpha operands +// - CMP: If ARG2 < 0, return ARG1, else return ARG0 +// - FLR: use FRC+MAD +// - XPD: use MAD+MAD +// - SGE, SLT: use MAD+CMP +// - RSQ: use ABS modifier for argument +// - Use OUTC_REPL_ALPHA to write results of an alpha-only operation (e.g. RCP) +// into color register +// - apparently, there's no quick DST operation +// - fglrx set FPI2_UNKNOWN_31 on a "MAD fragment.color, tmp0, tmp1, tmp2" +// - fglrx set FPI2_UNKNOWN_31 on a "MAX r2, r1, c0" +// - fglrx once set FPI0_UNKNOWN_31 on a "FRC r1, r1" +// +// Operand selection +// First stage selects three sources from the available registers and +// constant parameters. This is defined in INSTR1 (color) and INSTR3 (alpha). +// fglrx sorts the three source fields: Registers before constants, +// lower indices before higher indices; I do not know whether this is necessary. +// fglrx fills unused sources with "read constant 0" +// According to specs, you cannot select more than two different constants. +// +// Second stage selects the operands from the sources. This is defined in +// INSTR0 (color) and INSTR2 (alpha). You can also select the special constants +// zero and one. +// Swizzling and negation happens in this stage, as well. +// +// Important: Color and alpha seem to be mostly separate, i.e. their sources +// selection appears to be fully independent (the register storage is probably +// physically split into a color and an alpha section). +// However (because of the apparent physical split), there is some interaction +// WRT swizzling. If, for example, you want to load an R component into an +// Alpha operand, this R component is taken from a *color* source, not from +// an alpha source. The corresponding register doesn't even have to appear in +// the alpha sources list. (I hope this alll makes sense to you) +// +// Destination selection +// The destination register index is in FPI1 (color) and FPI3 (alpha) together +// with enable bits. +// There are separate enable bits for writing into temporary registers +// (DSTC_REG_* /DSTA_REG) and and program output registers (DSTC_OUTPUT_* /DSTA_OUTPUT). +// You can write to both at once, or not write at all (the same index +// must be used for both). +// +// Note: There is a special form for LRP +// - Argument order is the same as in ARB_fragment_program. +// - Operation is MAD +// - ARG1 is set to ARGC_SRC1C_LRP/ARGC_SRC1A_LRP +// - Set FPI0/FPI2_SPECIAL_LRP +// Arbitrary LRP (including support for swizzling) requires vanilla MAD+MAD */ +#define R300_PFS_INSTR1_0 0x46C0 +# define R300_FPI1_SRC0C_SHIFT 0 +# define R300_FPI1_SRC0C_MASK (31 << 0) +# define R300_FPI1_SRC0C_CONST (1 << 5) +# define R300_FPI1_SRC1C_SHIFT 6 +# define R300_FPI1_SRC1C_MASK (31 << 6) +# define R300_FPI1_SRC1C_CONST (1 << 11) +# define R300_FPI1_SRC2C_SHIFT 12 +# define R300_FPI1_SRC2C_MASK (31 << 12) +# define R300_FPI1_SRC2C_CONST (1 << 17) +# define R300_FPI1_DSTC_SHIFT 18 +# define R300_FPI1_DSTC_MASK (31 << 18) +# define R300_FPI1_DSTC_REG_X (1 << 23) +# define R300_FPI1_DSTC_REG_Y (1 << 24) +# define R300_FPI1_DSTC_REG_Z (1 << 25) +# define R300_FPI1_DSTC_OUTPUT_X (1 << 26) +# define R300_FPI1_DSTC_OUTPUT_Y (1 << 27) +# define R300_FPI1_DSTC_OUTPUT_Z (1 << 28) + +#define R300_PFS_INSTR3_0 0x47C0 +# define R300_FPI3_SRC0A_SHIFT 0 +# define R300_FPI3_SRC0A_MASK (31 << 0) +# define R300_FPI3_SRC0A_CONST (1 << 5) +# define R300_FPI3_SRC1A_SHIFT 6 +# define R300_FPI3_SRC1A_MASK (31 << 6) +# define R300_FPI3_SRC1A_CONST (1 << 11) +# define R300_FPI3_SRC2A_SHIFT 12 +# define R300_FPI3_SRC2A_MASK (31 << 12) +# define R300_FPI3_SRC2A_CONST (1 << 17) +# define R300_FPI3_DSTA_SHIFT 18 +# define R300_FPI3_DSTA_MASK (31 << 18) +# define R300_FPI3_DSTA_REG (1 << 23) +# define R300_FPI3_DSTA_OUTPUT (1 << 24) + +#define R300_PFS_INSTR0_0 0x48C0 +# define R300_FPI0_ARGC_SRC0C_XYZ 0 +# define R300_FPI0_ARGC_SRC0C_XXX 1 +# define R300_FPI0_ARGC_SRC0C_YYY 2 +# define R300_FPI0_ARGC_SRC0C_ZZZ 3 +# define R300_FPI0_ARGC_SRC1C_XYZ 4 +# define R300_FPI0_ARGC_SRC1C_XXX 5 +# define R300_FPI0_ARGC_SRC1C_YYY 6 +# define R300_FPI0_ARGC_SRC1C_ZZZ 7 +# define R300_FPI0_ARGC_SRC2C_XYZ 8 +# define R300_FPI0_ARGC_SRC2C_XXX 9 +# define R300_FPI0_ARGC_SRC2C_YYY 10 +# define R300_FPI0_ARGC_SRC2C_ZZZ 11 +# define R300_FPI0_ARGC_SRC0A 12 +# define R300_FPI0_ARGC_SRC1A 13 +# define R300_FPI0_ARGC_SRC2A 14 +# define R300_FPI0_ARGC_SRC1C_LRP 15 +# define R300_FPI0_ARGC_ZERO 20 +# define R300_FPI0_ARGC_ONE 21 +# define R300_FPI0_ARGC_HALF 22 /* GUESS */ +# define R300_FPI0_ARGC_SRC0C_YZX 23 +# define R300_FPI0_ARGC_SRC1C_YZX 24 +# define R300_FPI0_ARGC_SRC2C_YZX 25 +# define R300_FPI0_ARGC_SRC0C_ZXY 26 +# define R300_FPI0_ARGC_SRC1C_ZXY 27 +# define R300_FPI0_ARGC_SRC2C_ZXY 28 +# define R300_FPI0_ARGC_SRC0CA_WZY 29 +# define R300_FPI0_ARGC_SRC1CA_WZY 30 +# define R300_FPI0_ARGC_SRC2CA_WZY 31 + +# define R300_FPI0_ARG0C_SHIFT 0 +# define R300_FPI0_ARG0C_MASK (31 << 0) +# define R300_FPI0_ARG0C_NEG (1 << 5) +# define R300_FPI0_ARG0C_ABS (1 << 6) +# define R300_FPI0_ARG1C_SHIFT 7 +# define R300_FPI0_ARG1C_MASK (31 << 7) +# define R300_FPI0_ARG1C_NEG (1 << 12) +# define R300_FPI0_ARG1C_ABS (1 << 13) +# define R300_FPI0_ARG2C_SHIFT 14 +# define R300_FPI0_ARG2C_MASK (31 << 14) +# define R300_FPI0_ARG2C_NEG (1 << 19) +# define R300_FPI0_ARG2C_ABS (1 << 20) +# define R300_FPI0_SPECIAL_LRP (1 << 21) +# define R300_FPI0_OUTC_MAD (0 << 23) +# define R300_FPI0_OUTC_DP3 (1 << 23) +# define R300_FPI0_OUTC_DP4 (2 << 23) +# define R300_FPI0_OUTC_MIN (4 << 23) +# define R300_FPI0_OUTC_MAX (5 << 23) +# define R300_FPI0_OUTC_CMP (8 << 23) +# define R300_FPI0_OUTC_FRC (9 << 23) +# define R300_FPI0_OUTC_REPL_ALPHA (10 << 23) +# define R300_FPI0_OUTC_SAT (1 << 30) +# define R300_FPI0_UNKNOWN_31 (1 << 31) + +#define R300_PFS_INSTR2_0 0x49C0 +# define R300_FPI2_ARGA_SRC0C_X 0 +# define R300_FPI2_ARGA_SRC0C_Y 1 +# define R300_FPI2_ARGA_SRC0C_Z 2 +# define R300_FPI2_ARGA_SRC1C_X 3 +# define R300_FPI2_ARGA_SRC1C_Y 4 +# define R300_FPI2_ARGA_SRC1C_Z 5 +# define R300_FPI2_ARGA_SRC2C_X 6 +# define R300_FPI2_ARGA_SRC2C_Y 7 +# define R300_FPI2_ARGA_SRC2C_Z 8 +# define R300_FPI2_ARGA_SRC0A 9 +# define R300_FPI2_ARGA_SRC1A 10 +# define R300_FPI2_ARGA_SRC2A 11 +# define R300_FPI2_ARGA_SRC1A_LRP 15 +# define R300_FPI2_ARGA_ZERO 16 +# define R300_FPI2_ARGA_ONE 17 +# define R300_FPI2_ARGA_HALF 18 /* GUESS */ + +# define R300_FPI2_ARG0A_SHIFT 0 +# define R300_FPI2_ARG0A_MASK (31 << 0) +# define R300_FPI2_ARG0A_NEG (1 << 5) +# define R300_FPI2_ARG0A_ABS (1 << 6) /* GUESS */ +# define R300_FPI2_ARG1A_SHIFT 7 +# define R300_FPI2_ARG1A_MASK (31 << 7) +# define R300_FPI2_ARG1A_NEG (1 << 12) +# define R300_FPI2_ARG1A_ABS (1 << 13) /* GUESS */ +# define R300_FPI2_ARG2A_SHIFT 14 +# define R300_FPI2_ARG2A_MASK (31 << 14) +# define R300_FPI2_ARG2A_NEG (1 << 19) +# define R300_FPI2_ARG2A_ABS (1 << 20) /* GUESS */ +# define R300_FPI2_SPECIAL_LRP (1 << 21) +# define R300_FPI2_OUTA_MAD (0 << 23) +# define R300_FPI2_OUTA_DP4 (1 << 23) +# define R300_FPI2_OUTA_MIN (2 << 23) +# define R300_FPI2_OUTA_MAX (3 << 23) +# define R300_FPI2_OUTA_CMP (6 << 23) +# define R300_FPI2_OUTA_FRC (7 << 23) +# define R300_FPI2_OUTA_EX2 (8 << 23) +# define R300_FPI2_OUTA_LG2 (9 << 23) +# define R300_FPI2_OUTA_RCP (10 << 23) +# define R300_FPI2_OUTA_RSQ (11 << 23) +# define R300_FPI2_OUTA_SAT (1 << 30) +# define R300_FPI2_UNKNOWN_31 (1 << 31) +/* END */ + +/* gap */ +#define R300_PP_ALPHA_TEST 0x4BD4 +# define R300_REF_ALPHA_MASK 0x000000ff +# define R300_ALPHA_TEST_FAIL (0 << 8) +# define R300_ALPHA_TEST_LESS (1 << 8) +# define R300_ALPHA_TEST_LEQUAL (3 << 8) +# define R300_ALPHA_TEST_EQUAL (2 << 8) +# define R300_ALPHA_TEST_GEQUAL (6 << 8) +# define R300_ALPHA_TEST_GREATER (4 << 8) +# define R300_ALPHA_TEST_NEQUAL (5 << 8) +# define R300_ALPHA_TEST_PASS (7 << 8) +# define R300_ALPHA_TEST_OP_MASK (7 << 8) +# define R300_ALPHA_TEST_ENABLE (1 << 11) + +/* gap */ +/* Fragment program parameters in 7.16 floating point */ +#define R300_PFS_PARAM_0_X 0x4C00 +#define R300_PFS_PARAM_0_Y 0x4C04 +#define R300_PFS_PARAM_0_Z 0x4C08 +#define R300_PFS_PARAM_0_W 0x4C0C +/* GUESS: PARAM_31 is last, based on native limits reported by fglrx */ +#define R300_PFS_PARAM_31_X 0x4DF0 +#define R300_PFS_PARAM_31_Y 0x4DF4 +#define R300_PFS_PARAM_31_Z 0x4DF8 +#define R300_PFS_PARAM_31_W 0x4DFC + +/* Notes: +// - AFAIK fglrx always sets BLEND_UNKNOWN when blending is used in the application +// - AFAIK fglrx always sets BLEND_NO_SEPARATE when CBLEND and ABLEND are set to the same +// function (both registers are always set up completely in any case) +// - Most blend flags are simply copied from R200 and not tested yet */ +#define R300_RB3D_CBLEND 0x4E04 +#define R300_RB3D_ABLEND 0x4E08 + /* the following only appear in CBLEND */ +# define R300_BLEND_ENABLE (1 << 0) +# define R300_BLEND_UNKNOWN (3 << 1) +# define R300_BLEND_NO_SEPARATE (1 << 3) + /* the following are shared between CBLEND and ABLEND */ +# define R300_FCN_MASK (3 << 12) +# define R300_COMB_FCN_ADD_CLAMP (0 << 12) +# define R300_COMB_FCN_ADD_NOCLAMP (1 << 12) +# define R300_COMB_FCN_SUB_CLAMP (2 << 12) +# define R300_COMB_FCN_SUB_NOCLAMP (3 << 12) +# define R300_SRC_BLEND_GL_ZERO (32 << 16) +# define R300_SRC_BLEND_GL_ONE (33 << 16) +# define R300_SRC_BLEND_GL_SRC_COLOR (34 << 16) +# define R300_SRC_BLEND_GL_ONE_MINUS_SRC_COLOR (35 << 16) +# define R300_SRC_BLEND_GL_DST_COLOR (36 << 16) +# define R300_SRC_BLEND_GL_ONE_MINUS_DST_COLOR (37 << 16) +# define R300_SRC_BLEND_GL_SRC_ALPHA (38 << 16) +# define R300_SRC_BLEND_GL_ONE_MINUS_SRC_ALPHA (39 << 16) +# define R300_SRC_BLEND_GL_DST_ALPHA (40 << 16) +# define R300_SRC_BLEND_GL_ONE_MINUS_DST_ALPHA (41 << 16) +# define R300_SRC_BLEND_GL_SRC_ALPHA_SATURATE (42 << 16) +# define R300_SRC_BLEND_MASK (63 << 16) +# define R300_DST_BLEND_GL_ZERO (32 << 24) +# define R300_DST_BLEND_GL_ONE (33 << 24) +# define R300_DST_BLEND_GL_SRC_COLOR (34 << 24) +# define R300_DST_BLEND_GL_ONE_MINUS_SRC_COLOR (35 << 24) +# define R300_DST_BLEND_GL_DST_COLOR (36 << 24) +# define R300_DST_BLEND_GL_ONE_MINUS_DST_COLOR (37 << 24) +# define R300_DST_BLEND_GL_SRC_ALPHA (38 << 24) +# define R300_DST_BLEND_GL_ONE_MINUS_SRC_ALPHA (39 << 24) +# define R300_DST_BLEND_GL_DST_ALPHA (40 << 24) +# define R300_DST_BLEND_GL_ONE_MINUS_DST_ALPHA (41 << 24) +# define R300_DST_BLEND_MASK (63 << 24) +#define R300_RB3D_COLORMASK 0x4E0C +# define R300_COLORMASK0_B (1<<0) +# define R300_COLORMASK0_G (1<<1) +# define R300_COLORMASK0_R (1<<2) +# define R300_COLORMASK0_A (1<<3) + +/* gap */ +#define R300_RB3D_COLOROFFSET0 0x4E28 +# define R300_COLOROFFSET_MASK 0xFFFFFFF0 /* GUESS */ +#define R300_RB3D_COLOROFFSET1 0x4E2C /* GUESS */ +#define R300_RB3D_COLOROFFSET2 0x4E30 /* GUESS */ +#define R300_RB3D_COLOROFFSET3 0x4E34 /* GUESS */ +/* gap */ +/* Bit 16: Larger tiles +// Bit 17: 4x2 tiles +// Bit 18: Extremely weird tile like, but some pixels duplicated? */ +#define R300_RB3D_COLORPITCH0 0x4E38 +# define R300_COLORPITCH_MASK 0x00001FF8 /* GUESS */ +# define R300_COLOR_TILE_ENABLE (1 << 16) /* GUESS */ +# define R300_COLOR_MICROTILE_ENABLE (1 << 17) /* GUESS */ +# define R300_COLOR_ENDIAN_NO_SWAP (0 << 18) /* GUESS */ +# define R300_COLOR_ENDIAN_WORD_SWAP (1 << 18) /* GUESS */ +# define R300_COLOR_ENDIAN_DWORD_SWAP (2 << 18) /* GUESS */ +# define R300_COLOR_FORMAT_RGB565 (2 << 22) +# define R300_COLOR_FORMAT_ARGB8888 (3 << 22) +#define R300_RB3D_COLORPITCH1 0x4E3C /* GUESS */ +#define R300_RB3D_COLORPITCH2 0x4E40 /* GUESS */ +#define R300_RB3D_COLORPITCH3 0x4E44 /* GUESS */ + +/* gap */ +/* Guess by Vladimir. +// Set to 0A before 3D operations, set to 02 afterwards. */ +#define R300_RB3D_DSTCACHE_CTLSTAT 0x4E4C +# define R300_RB3D_DSTCACHE_02 0x00000002 +# define R300_RB3D_DSTCACHE_0A 0x0000000A + +/* gap */ +/* There seems to be no "write only" setting, so use Z-test = ALWAYS for this. */ +/* Bit (1<<8) is the "test" bit. so plain write is 6 - vd */ +#define R300_RB3D_ZSTENCIL_CNTL_0 0x4F00 +# define R300_RB3D_Z_DISABLED_1 0x00000010 /* GUESS */ +# define R300_RB3D_Z_DISABLED_2 0x00000014 /* GUESS */ +# define R300_RB3D_Z_TEST 0x00000012 +# define R300_RB3D_Z_TEST_AND_WRITE 0x00000016 +# define R300_RB3D_Z_WRITE_ONLY 0x00000006 + +# define R300_RB3D_Z_TEST 0x00000012 +# define R300_RB3D_Z_TEST_AND_WRITE 0x00000016 +# define R300_RB3D_Z_WRITE_ONLY 0x00000006 +# define R300_RB3D_STENCIL_ENABLE 0x00000001 + +#define R300_RB3D_ZSTENCIL_CNTL_1 0x4F04 + /* functions */ +# define R300_ZS_NEVER 0 +# define R300_ZS_LESS 1 +# define R300_ZS_LEQUAL 2 +# define R300_ZS_EQUAL 3 +# define R300_ZS_GEQUAL 4 +# define R300_ZS_GREATER 5 +# define R300_ZS_NOTEQUAL 6 +# define R300_ZS_ALWAYS 7 +# define R300_ZS_MASK 7 + /* operations */ +# define R300_ZS_KEEP 0 +# define R300_ZS_ZERO 1 +# define R300_ZS_REPLACE 2 +# define R300_ZS_INCR 3 +# define R300_ZS_DECR 4 +# define R300_ZS_INVERT 5 +# define R300_ZS_INCR_WRAP 6 +# define R300_ZS_DECR_WRAP 7 + + /* front and back refer to operations done for front + and back faces, i.e. separate stencil function support */ +# define R300_RB3D_ZS1_DEPTH_FUNC_SHIFT 0 +# define R300_RB3D_ZS1_FRONT_FUNC_SHIFT 3 +# define R300_RB3D_ZS1_FRONT_FAIL_OP_SHIFT 6 +# define R300_RB3D_ZS1_FRONT_ZPASS_OP_SHIFT 9 +# define R300_RB3D_ZS1_FRONT_ZFAIL_OP_SHIFT 12 +# define R300_RB3D_ZS1_BACK_FUNC_SHIFT 15 +# define R300_RB3D_ZS1_BACK_FAIL_OP_SHIFT 18 +# define R300_RB3D_ZS1_BACK_ZPASS_OP_SHIFT 21 +# define R300_RB3D_ZS1_BACK_ZFAIL_OP_SHIFT 24 + + + +#define R300_RB3D_ZSTENCIL_CNTL_2 0x4F08 +# define R300_RB3D_ZS2_STENCIL_REF_SHIFT 0 +# define R300_RB3D_ZS2_STENCIL_MASK 0xFF +# define R300_RB3D_ZS2_STENCIL_MASK_SHIFT 8 +# define R300_RB3D_ZS2_STENCIL_WRITE_MASK_SHIFT 16 + +/* gap */ + +#define R300_RB3D_ZSTENCIL_FORMAT 0x4F10 +# define R300_DEPTH_FORMAT_16BIT_INT_Z (0 << 0) +# define R300_DEPTH_FORMAT_24BIT_INT_Z (2 << 0) + +/* gap */ +#define R300_RB3D_DEPTHOFFSET 0x4F20 +#define R300_RB3D_DEPTHPITCH 0x4F24 +# define R300_DEPTHPITCH_MASK 0x00001FF8 /* GUESS */ +# define R300_DEPTH_TILE_ENABLE (1 << 16) /* GUESS */ +# define R300_DEPTH_MICROTILE_ENABLE (1 << 17) /* GUESS */ +# define R300_DEPTH_ENDIAN_NO_SWAP (0 << 18) /* GUESS */ +# define R300_DEPTH_ENDIAN_WORD_SWAP (1 << 18) /* GUESS */ +# define R300_DEPTH_ENDIAN_DWORD_SWAP (2 << 18) /* GUESS */ + +/* BEGIN: Vertex program instruction set +// Every instruction is four dwords long: +// DWORD 0: output and opcode +// DWORD 1: first argument +// DWORD 2: second argument +// DWORD 3: third argument +// +// Notes: +// - ABS r, a is implemented as MAX r, a, -a +// - MOV is implemented as ADD to zero +// - XPD is implemented as MUL + MAD +// - FLR is implemented as FRC + ADD +// - apparently, fglrx tries to schedule instructions so that there is at least +// one instruction between the write to a temporary and the first read +// from said temporary; however, violations of this scheduling are allowed +// - register indices seem to be unrelated with OpenGL aliasing to conventional state +// - only one attribute and one parameter can be loaded at a time; however, the +// same attribute/parameter can be used for more than one argument +// - the second software argument for POW is the third hardware argument (no idea why) +// - MAD with only temporaries as input seems to use VPI_OUT_SELECT_MAD_2 +// +// There is some magic surrounding LIT: +// The single argument is replicated across all three inputs, but swizzled: +// First argument: xyzy +// Second argument: xyzx +// Third argument: xyzw +// Whenever the result is used later in the fragment program, fglrx forces x and w +// to be 1.0 in the input selection; I don't know whether this is strictly necessary */ +#define R300_VPI_OUT_OP_DOT (1 << 0) +#define R300_VPI_OUT_OP_MUL (2 << 0) +#define R300_VPI_OUT_OP_ADD (3 << 0) +#define R300_VPI_OUT_OP_MAD (4 << 0) +#define R300_VPI_OUT_OP_DST (5 << 0) +#define R300_VPI_OUT_OP_FRC (6 << 0) +#define R300_VPI_OUT_OP_MAX (7 << 0) +#define R300_VPI_OUT_OP_MIN (8 << 0) +#define R300_VPI_OUT_OP_SGE (9 << 0) +#define R300_VPI_OUT_OP_SLT (10 << 0) +#define R300_VPI_OUT_OP_UNK12 (12 << 0) /* Used in GL_POINT_DISTANCE_ATTENUATION_ARB, vector(scalar, vector) */ +#define R300_VPI_OUT_OP_EXP (65 << 0) +#define R300_VPI_OUT_OP_LOG (66 << 0) +#define R300_VPI_OUT_OP_UNK67 (67 << 0) /* Used in fog computations, scalar(scalar) */ +#define R300_VPI_OUT_OP_LIT (68 << 0) +#define R300_VPI_OUT_OP_POW (69 << 0) +#define R300_VPI_OUT_OP_RCP (70 << 0) +#define R300_VPI_OUT_OP_RSQ (72 << 0) +#define R300_VPI_OUT_OP_UNK73 (73 << 0) /* Used in GL_POINT_DISTANCE_ATTENUATION_ARB, scalar(scalar) */ +#define R300_VPI_OUT_OP_EX2 (75 << 0) +#define R300_VPI_OUT_OP_LG2 (76 << 0) +#define R300_VPI_OUT_OP_MAD_2 (128 << 0) +#define R300_VPI_OUT_OP_UNK129 (129 << 0) /* all temps, vector(scalar, vector, vector) */ + +#define R300_VPI_OUT_REG_CLASS_TEMPORARY (0 << 8) +#define R300_VPI_OUT_REG_CLASS_RESULT (2 << 8) +#define R300_VPI_OUT_REG_CLASS_MASK (31 << 8) + +#define R300_VPI_OUT_REG_INDEX_SHIFT 13 +#define R300_VPI_OUT_REG_INDEX_MASK (31 << 13) /* GUESS based on fglrx native limits */ + +#define R300_VPI_OUT_WRITE_X (1 << 20) +#define R300_VPI_OUT_WRITE_Y (1 << 21) +#define R300_VPI_OUT_WRITE_Z (1 << 22) +#define R300_VPI_OUT_WRITE_W (1 << 23) + +#define R300_VPI_IN_REG_CLASS_TEMPORARY (0 << 0) +#define R300_VPI_IN_REG_CLASS_ATTRIBUTE (1 << 0) +#define R300_VPI_IN_REG_CLASS_PARAMETER (2 << 0) +#define R300_VPI_IN_REG_CLASS_NONE (9 << 0) +#define R300_VPI_IN_REG_CLASS_MASK (31 << 0) /* GUESS */ + +#define R300_VPI_IN_REG_INDEX_SHIFT 5 +#define R300_VPI_IN_REG_INDEX_MASK (255 << 5) /* GUESS based on fglrx native limits */ + +/* The R300 can select components from the input register arbitrarily. +// Use the following constants, shifted by the component shift you +// want to select */ +#define R300_VPI_IN_SELECT_X 0 +#define R300_VPI_IN_SELECT_Y 1 +#define R300_VPI_IN_SELECT_Z 2 +#define R300_VPI_IN_SELECT_W 3 +#define R300_VPI_IN_SELECT_ZERO 4 +#define R300_VPI_IN_SELECT_ONE 5 +#define R300_VPI_IN_SELECT_MASK 7 + +#define R300_VPI_IN_X_SHIFT 13 +#define R300_VPI_IN_Y_SHIFT 16 +#define R300_VPI_IN_Z_SHIFT 19 +#define R300_VPI_IN_W_SHIFT 22 + +#define R300_VPI_IN_NEG_X (1 << 25) +#define R300_VPI_IN_NEG_Y (1 << 26) +#define R300_VPI_IN_NEG_Z (1 << 27) +#define R300_VPI_IN_NEG_W (1 << 28) +/* END */ + +//BEGIN: Packet 3 commands + +// A primitive emission dword. +#define R300_PRIM_TYPE_NONE (0 << 0) +#define R300_PRIM_TYPE_POINT (1 << 0) +#define R300_PRIM_TYPE_LINE (2 << 0) +#define R300_PRIM_TYPE_LINE_STRIP (3 << 0) +#define R300_PRIM_TYPE_TRI_LIST (4 << 0) +#define R300_PRIM_TYPE_TRI_FAN (5 << 0) +#define R300_PRIM_TYPE_TRI_STRIP (6 << 0) +#define R300_PRIM_TYPE_TRI_TYPE2 (7 << 0) +#define R300_PRIM_TYPE_RECT_LIST (8 << 0) +#define R300_PRIM_TYPE_3VRT_POINT_LIST (9 << 0) +#define R300_PRIM_TYPE_3VRT_LINE_LIST (10 << 0) +#define R300_PRIM_TYPE_POINT_SPRITES (11 << 0) // GUESS (based on r200) +#define R300_PRIM_TYPE_LINE_LOOP (12 << 0) +#define R300_PRIM_TYPE_QUADS (13 << 0) +#define R300_PRIM_TYPE_QUAD_STRIP (14 << 0) +#define R300_PRIM_TYPE_POLYGON (15 << 0) +#define R300_PRIM_TYPE_MASK 0xF +#define R300_PRIM_WALK_IND (1 << 4) +#define R300_PRIM_WALK_LIST (2 << 4) +#define R300_PRIM_WALK_RING (3 << 4) +#define R300_PRIM_WALK_MASK (3 << 4) +#define R300_PRIM_COLOR_ORDER_BGRA (0 << 6) // GUESS (based on r200) +#define R300_PRIM_COLOR_ORDER_RGBA (1 << 6) // GUESS +#define R300_PRIM_NUM_VERTICES_SHIFT 16 + +// Draw a primitive from vertex data in arrays loaded via 3D_LOAD_VBPNTR. +// Two parameter dwords: +// 0. The first parameter appears to be always 0 +// 1. The second parameter is a standard primitive emission dword. +#define R300_PACKET3_3D_DRAW_VBUF 0x00002800 + +// Specify the full set of vertex arrays as (address, stride). +// The first parameter is the number of vertex arrays specified. +// The rest of the command is a variable length list of blocks, where +// each block is three dwords long and specifies two arrays. +// The first dword of a block is split into two words, the lower significant +// word refers to the first array, the more significant word to the second +// array in the block. +// The low byte of each word contains the size of an array entry in dwords, +// the high byte contains the stride of the array. +// The second dword of a block contains the pointer to the first array, +// the third dword of a block contains the pointer to the second array. +// Note that if the total number of arrays is odd, the third dword of +// the last block is omitted. +#define R300_PACKET3_3D_LOAD_VBPNTR 0x00002F00 + +#define R300_PACKET3_INDX_BUFFER 0x00003300 +# define R300_EB_UNK1_SHIFT 24 +# define R300_EB_UNK1 (0x80<<24) +# define R300_EB_UNK2 0x0810 +#define R300_PACKET3_3D_DRAW_INDX_2 0x00003600 + +//END + +#endif /* _R300_REG_H */ diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 20bcf872b348..6d9080a3ca7e 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -32,6 +32,7 @@ #include "drm.h" #include "radeon_drm.h" #include "radeon_drv.h" +#include "r300_reg.h" #define RADEON_FIFO_DEBUG 0 @@ -1151,6 +1152,8 @@ static void radeon_cp_init_ring_buffer( drm_device_t *dev, #if __OS_HAS_AGP if ( !dev_priv->is_pci ) { + /* set RADEON_AGP_BASE here instead of relying on X from user space */ + RADEON_WRITE(RADEON_AGP_BASE, (unsigned int)dev->agp->base); RADEON_WRITE( RADEON_CP_RB_RPTR_ADDR, dev_priv->ring_rptr->offset - dev->agp->base @@ -1407,6 +1410,7 @@ static int radeon_do_init_cp( drm_device_t *dev, drm_radeon_init_t *init ) radeon_do_cleanup_cp(dev); return DRM_ERR(EINVAL); } + dev->agp_buffer_token = init->buffers_offset; dev->agp_buffer_map = drm_core_findmap(dev, init->buffers_offset); if(!dev->agp_buffer_map) { DRM_ERROR("could not find dma buffer region!\n"); @@ -1625,6 +1629,9 @@ int radeon_cp_init( DRM_IOCTL_ARGS ) DRM_COPY_FROM_USER_IOCTL( init, (drm_radeon_init_t __user *)data, sizeof(init) ); + if(init.func == RADEON_INIT_R300_CP) + r300_init_reg_flags(); + switch ( init.func ) { case RADEON_INIT_CP: case RADEON_INIT_R200_CP: @@ -2039,15 +2046,43 @@ int radeon_driver_preinit(struct drm_device *dev, unsigned long flags) case CHIP_RV200: case CHIP_R200: case CHIP_R300: + case CHIP_R420: dev_priv->flags |= CHIP_HAS_HIERZ; break; default: /* all other chips have no hierarchical z buffer */ break; } + + if (drm_device_is_agp(dev)) + dev_priv->flags |= CHIP_IS_AGP; + + DRM_DEBUG("%s card detected\n", + ((dev_priv->flags & CHIP_IS_AGP) ? "AGP" : "PCI")); return ret; } +int radeon_presetup(struct drm_device *dev) +{ + int ret; + drm_local_map_t *map; + drm_radeon_private_t *dev_priv = dev->dev_private; + + ret = drm_addmap(dev, drm_get_resource_start(dev, 2), + drm_get_resource_len(dev, 2), _DRM_REGISTERS, + _DRM_READ_ONLY, &dev_priv->mmio); + if (ret != 0) + return ret; + + ret = drm_addmap(dev, drm_get_resource_start(dev, 0), + drm_get_resource_len(dev, 0), _DRM_FRAME_BUFFER, + _DRM_WRITE_COMBINING, &map); + if (ret != 0) + return ret; + + return 0; +} + int radeon_driver_postcleanup(struct drm_device *dev) { drm_radeon_private_t *dev_priv = dev->dev_private; diff --git a/drivers/char/drm/radeon_drm.h b/drivers/char/drm/radeon_drm.h index c1e62d047989..3792798270a4 100644 --- a/drivers/char/drm/radeon_drm.h +++ b/drivers/char/drm/radeon_drm.h @@ -195,6 +195,52 @@ typedef union { #define RADEON_WAIT_2D 0x1 #define RADEON_WAIT_3D 0x2 +/* Allowed parameters for R300_CMD_PACKET3 + */ +#define R300_CMD_PACKET3_CLEAR 0 +#define R300_CMD_PACKET3_RAW 1 + +/* Commands understood by cmd_buffer ioctl for R300. + * The interface has not been stabilized, so some of these may be removed + * and eventually reordered before stabilization. + */ +#define R300_CMD_PACKET0 1 +#define R300_CMD_VPU 2 /* emit vertex program upload */ +#define R300_CMD_PACKET3 3 /* emit a packet3 */ +#define R300_CMD_END3D 4 /* emit sequence ending 3d rendering */ +#define R300_CMD_CP_DELAY 5 +#define R300_CMD_DMA_DISCARD 6 +#define R300_CMD_WAIT 7 +# define R300_WAIT_2D 0x1 +# define R300_WAIT_3D 0x2 +# define R300_WAIT_2D_CLEAN 0x3 +# define R300_WAIT_3D_CLEAN 0x4 + +typedef union { + unsigned int u; + struct { + unsigned char cmd_type, pad0, pad1, pad2; + } header; + struct { + unsigned char cmd_type, count, reglo, reghi; + } packet0; + struct { + unsigned char cmd_type, count, adrlo, adrhi; + } vpu; + struct { + unsigned char cmd_type, packet, pad0, pad1; + } packet3; + struct { + unsigned char cmd_type, packet; + unsigned short count; /* amount of packet2 to emit */ + } delay; + struct { + unsigned char cmd_type, buf_idx, pad0, pad1; + } dma; + struct { + unsigned char cmd_type, flags, pad0, pad1; + } wait; +} drm_r300_cmd_header_t; #define RADEON_FRONT 0x1 #define RADEON_BACK 0x2 diff --git a/drivers/char/drm/radeon_drv.c b/drivers/char/drm/radeon_drv.c index 18e4e5b0952f..e0682f64b400 100644 --- a/drivers/char/drm/radeon_drv.c +++ b/drivers/char/drm/radeon_drv.c @@ -76,6 +76,7 @@ static struct drm_driver driver = { .driver_features = DRIVER_USE_AGP | DRIVER_USE_MTRR | DRIVER_PCI_DMA | DRIVER_SG | DRIVER_HAVE_IRQ | DRIVER_HAVE_DMA | DRIVER_IRQ_SHARED | DRIVER_IRQ_VBL, .dev_priv_size = sizeof(drm_radeon_buf_priv_t), .preinit = radeon_driver_preinit, + .presetup = radeon_presetup, .postcleanup = radeon_driver_postcleanup, .prerelease = radeon_driver_prerelease, .pretakedown = radeon_driver_pretakedown, diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index 771aa80a5e8c..f12a963ede18 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -82,9 +82,10 @@ * - Add support for r100 cube maps * 1.16- Add R200_EMIT_PP_TRI_PERF_CNTL packet to support brilinear * texture filtering on r200 + * 1.17- Add initial support for R300 (3D). */ #define DRIVER_MAJOR 1 -#define DRIVER_MINOR 16 +#define DRIVER_MINOR 17 #define DRIVER_PATCHLEVEL 0 #define GET_RING_HEAD(dev_priv) DRM_READ32( (dev_priv)->ring_rptr, 0 ) @@ -106,7 +107,9 @@ enum radeon_family { CHIP_RV280, CHIP_R300, CHIP_RS300, + CHIP_R350, CHIP_RV350, + CHIP_R420, CHIP_LAST, }; @@ -290,6 +293,7 @@ extern int radeon_wait_ring( drm_radeon_private_t *dev_priv, int n ); extern int radeon_do_cp_idle( drm_radeon_private_t *dev_priv ); extern int radeon_driver_preinit(struct drm_device *dev, unsigned long flags); +extern int radeon_presetup(struct drm_device *dev); extern int radeon_driver_postcleanup(struct drm_device *dev); extern int radeon_mem_alloc( DRM_IOCTL_ARGS ); @@ -320,6 +324,14 @@ extern int radeon_postcleanup( struct drm_device *dev ); extern long radeon_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg); + +/* r300_cmdbuf.c */ +extern void r300_init_reg_flags(void); + +extern int r300_do_cp_cmdbuf(drm_device_t* dev, DRMFILE filp, + drm_file_t* filp_priv, + drm_radeon_cmd_buffer_t* cmdbuf); + /* Flags for stats.boxes */ #define RADEON_BOX_DMA_IDLE 0x1 @@ -357,6 +369,11 @@ extern long radeon_compat_ioctl(struct file *filp, unsigned int cmd, #define RADEON_CRTC2_OFFSET 0x0324 #define RADEON_CRTC2_OFFSET_CNTL 0x0328 +#define RADEON_MPP_TB_CONFIG 0x01c0 +#define RADEON_MEM_CNTL 0x0140 +#define RADEON_MEM_SDRAM_MODE_REG 0x0158 +#define RADEON_AGP_BASE 0x0170 + #define RADEON_RB3D_COLOROFFSET 0x1c40 #define RADEON_RB3D_COLORPITCH 0x1c48 @@ -651,16 +668,27 @@ extern long radeon_compat_ioctl(struct file *filp, unsigned int cmd, #define RADEON_CP_PACKET1 0x40000000 #define RADEON_CP_PACKET2 0x80000000 #define RADEON_CP_PACKET3 0xC0000000 +# define RADEON_CP_NOP 0x00001000 +# define RADEON_CP_NEXT_CHAR 0x00001900 +# define RADEON_CP_PLY_NEXTSCAN 0x00001D00 +# define RADEON_CP_SET_SCISSORS 0x00001E00 + /* GEN_INDX_PRIM is unsupported starting with R300 */ # define RADEON_3D_RNDR_GEN_INDX_PRIM 0x00002300 # define RADEON_WAIT_FOR_IDLE 0x00002600 # define RADEON_3D_DRAW_VBUF 0x00002800 # define RADEON_3D_DRAW_IMMD 0x00002900 # define RADEON_3D_DRAW_INDX 0x00002A00 +# define RADEON_CP_LOAD_PALETTE 0x00002C00 # define RADEON_3D_LOAD_VBPNTR 0x00002F00 # define RADEON_MPEG_IDCT_MACROBLOCK 0x00003000 # define RADEON_MPEG_IDCT_MACROBLOCK_REV 0x00003100 # define RADEON_3D_CLEAR_ZMASK 0x00003200 +# define RADEON_CP_INDX_BUFFER 0x00003300 +# define RADEON_CP_3D_DRAW_VBUF_2 0x00003400 +# define RADEON_CP_3D_DRAW_IMMD_2 0x00003500 +# define RADEON_CP_3D_DRAW_INDX_2 0x00003600 # define RADEON_3D_CLEAR_HIZ 0x00003700 +# define RADEON_CP_3D_CLEAR_CMASK 0x00003802 # define RADEON_CNTL_HOSTDATA_BLT 0x00009400 # define RADEON_CNTL_PAINT_MULTI 0x00009A00 # define RADEON_CNTL_BITBLT_MULTI 0x00009B00 diff --git a/drivers/char/drm/radeon_state.c b/drivers/char/drm/radeon_state.c index 1f79e249146c..64a3e3a406ef 100644 --- a/drivers/char/drm/radeon_state.c +++ b/drivers/char/drm/radeon_state.c @@ -1493,7 +1493,7 @@ static void radeon_cp_dispatch_indices( drm_device_t *dev, } -#define RADEON_MAX_TEXTURE_SIZE (RADEON_BUFFER_SIZE - 8 * sizeof(u32)) +#define RADEON_MAX_TEXTURE_SIZE RADEON_BUFFER_SIZE static int radeon_cp_dispatch_texture( DRMFILE filp, drm_device_t *dev, @@ -1506,10 +1506,11 @@ static int radeon_cp_dispatch_texture( DRMFILE filp, u32 format; u32 *buffer; const u8 __user *data; - int size, dwords, tex_width, blit_width; + int size, dwords, tex_width, blit_width, spitch; u32 height; int i; u32 texpitch, microtile; + u32 offset; RING_LOCALS; DRM_GET_PRIV_WITH_RETURN( filp_priv, filp ); @@ -1530,17 +1531,6 @@ static int radeon_cp_dispatch_texture( DRMFILE filp, RADEON_WAIT_UNTIL_IDLE(); ADVANCE_RING(); -#ifdef __BIG_ENDIAN - /* The Mesa texture functions provide the data in little endian as the - * chip wants it, but we need to compensate for the fact that the CP - * ring gets byte-swapped - */ - BEGIN_RING( 2 ); - OUT_RING_REG( RADEON_RBBM_GUICNTL, RADEON_HOST_DATA_SWAP_32BIT ); - ADVANCE_RING(); -#endif - - /* The compiler won't optimize away a division by a variable, * even if the only legal values are powers of two. Thus, we'll * use a shift instead. @@ -1572,6 +1562,10 @@ static int radeon_cp_dispatch_texture( DRMFILE filp, DRM_ERROR( "invalid texture format %d\n", tex->format ); return DRM_ERR(EINVAL); } + spitch = blit_width >> 6; + if (spitch == 0 && image->height > 1) + return DRM_ERR(EINVAL); + texpitch = tex->pitch; if ((texpitch << 22) & RADEON_DST_TILE_MICRO) { microtile = 1; @@ -1624,25 +1618,6 @@ static int radeon_cp_dispatch_texture( DRMFILE filp, */ buffer = (u32*)((char*)dev->agp_buffer_map->handle + buf->offset); dwords = size / 4; - buffer[0] = CP_PACKET3( RADEON_CNTL_HOSTDATA_BLT, dwords + 6 ); - buffer[1] = (RADEON_GMC_DST_PITCH_OFFSET_CNTL | - RADEON_GMC_BRUSH_NONE | - (format << 8) | - RADEON_GMC_SRC_DATATYPE_COLOR | - RADEON_ROP3_S | - RADEON_DP_SRC_SOURCE_HOST_DATA | - RADEON_GMC_CLR_CMP_CNTL_DIS | - RADEON_GMC_WR_MSK_DIS); - - buffer[2] = (texpitch << 22) | (tex->offset >> 10); - buffer[3] = 0xffffffff; - buffer[4] = 0xffffffff; - buffer[5] = (image->y << 16) | image->x; - buffer[6] = (height << 16) | image->width; - buffer[7] = dwords; - buffer += 8; - - if (microtile) { /* texture micro tiling in use, minimum texture width is thus 16 bytes. @@ -1750,9 +1725,28 @@ static int radeon_cp_dispatch_texture( DRMFILE filp, } buf->filp = filp; - buf->used = (dwords + 8) * sizeof(u32); - radeon_cp_dispatch_indirect( dev, buf, 0, buf->used ); - radeon_cp_discard_buffer( dev, buf ); + buf->used = size; + offset = dev_priv->gart_buffers_offset + buf->offset; + BEGIN_RING(9); + OUT_RING(CP_PACKET3(RADEON_CNTL_BITBLT_MULTI, 5)); + OUT_RING(RADEON_GMC_SRC_PITCH_OFFSET_CNTL | + RADEON_GMC_DST_PITCH_OFFSET_CNTL | + RADEON_GMC_BRUSH_NONE | + (format << 8) | + RADEON_GMC_SRC_DATATYPE_COLOR | + RADEON_ROP3_S | + RADEON_DP_SRC_SOURCE_MEMORY | + RADEON_GMC_CLR_CMP_CNTL_DIS | + RADEON_GMC_WR_MSK_DIS ); + OUT_RING((spitch << 22) | (offset >> 10)); + OUT_RING((texpitch << 22) | (tex->offset >> 10)); + OUT_RING(0); + OUT_RING((image->x << 16) | image->y); + OUT_RING((image->width << 16) | height); + RADEON_WAIT_UNTIL_2D_IDLE(); + ADVANCE_RING(); + + radeon_cp_discard_buffer(dev, buf); /* Update the input parameters for next time */ image->y += height; @@ -2797,6 +2791,17 @@ static int radeon_cp_cmdbuf( DRM_IOCTL_ARGS ) orig_nbox = cmdbuf.nbox; + if(dev_priv->microcode_version == UCODE_R300) { + int temp; + temp=r300_do_cp_cmdbuf(dev, filp, filp_priv, &cmdbuf); + + if (orig_bufsz != 0) + drm_free(kbuf, orig_bufsz, DRM_MEM_DRIVER); + + return temp; + } + + /* microcode_version != r300 */ while ( cmdbuf.bufsz >= sizeof(header) ) { header.i = *(int *)cmdbuf.buf; diff --git a/drivers/char/drm/savage_bci.c b/drivers/char/drm/savage_bci.c new file mode 100644 index 000000000000..2fd40bac7c97 --- /dev/null +++ b/drivers/char/drm/savage_bci.c @@ -0,0 +1,1096 @@ +/* savage_bci.c -- BCI support for Savage + * + * Copyright 2004 Felix Kuehling + * All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NON-INFRINGEMENT. IN NO EVENT SHALL FELIX KUEHLING BE LIABLE FOR + * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF + * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION + * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + */ +#include "drmP.h" +#include "savage_drm.h" +#include "savage_drv.h" + +/* Need a long timeout for shadow status updates can take a while + * and so can waiting for events when the queue is full. */ +#define SAVAGE_DEFAULT_USEC_TIMEOUT 1000000 /* 1s */ +#define SAVAGE_EVENT_USEC_TIMEOUT 5000000 /* 5s */ +#define SAVAGE_FREELIST_DEBUG 0 + +static int +savage_bci_wait_fifo_shadow(drm_savage_private_t *dev_priv, unsigned int n) +{ + uint32_t mask = dev_priv->status_used_mask; + uint32_t threshold = dev_priv->bci_threshold_hi; + uint32_t status; + int i; + +#if SAVAGE_BCI_DEBUG + if (n > dev_priv->cob_size + SAVAGE_BCI_FIFO_SIZE - threshold) + DRM_ERROR("Trying to emit %d words " + "(more than guaranteed space in COB)\n", n); +#endif + + for (i = 0; i < SAVAGE_DEFAULT_USEC_TIMEOUT; i++) { + DRM_MEMORYBARRIER(); + status = dev_priv->status_ptr[0]; + if ((status & mask) < threshold) + return 0; + DRM_UDELAY(1); + } + +#if SAVAGE_BCI_DEBUG + DRM_ERROR("failed!\n"); + DRM_INFO(" status=0x%08x, threshold=0x%08x\n", status, threshold); +#endif + return DRM_ERR(EBUSY); +} + +static int +savage_bci_wait_fifo_s3d(drm_savage_private_t *dev_priv, unsigned int n) +{ + uint32_t maxUsed = dev_priv->cob_size + SAVAGE_BCI_FIFO_SIZE - n; + uint32_t status; + int i; + + for (i = 0; i < SAVAGE_DEFAULT_USEC_TIMEOUT; i++) { + status = SAVAGE_READ(SAVAGE_STATUS_WORD0); + if ((status & SAVAGE_FIFO_USED_MASK_S3D) <= maxUsed) + return 0; + DRM_UDELAY(1); + } + +#if SAVAGE_BCI_DEBUG + DRM_ERROR("failed!\n"); + DRM_INFO(" status=0x%08x\n", status); +#endif + return DRM_ERR(EBUSY); +} + +static int +savage_bci_wait_fifo_s4(drm_savage_private_t *dev_priv, unsigned int n) +{ + uint32_t maxUsed = dev_priv->cob_size + SAVAGE_BCI_FIFO_SIZE - n; + uint32_t status; + int i; + + for (i = 0; i < SAVAGE_DEFAULT_USEC_TIMEOUT; i++) { + status = SAVAGE_READ(SAVAGE_ALT_STATUS_WORD0); + if ((status & SAVAGE_FIFO_USED_MASK_S4) <= maxUsed) + return 0; + DRM_UDELAY(1); + } + +#if SAVAGE_BCI_DEBUG + DRM_ERROR("failed!\n"); + DRM_INFO(" status=0x%08x\n", status); +#endif + return DRM_ERR(EBUSY); +} + +/* + * Waiting for events. + * + * The BIOSresets the event tag to 0 on mode changes. Therefore we + * never emit 0 to the event tag. If we find a 0 event tag we know the + * BIOS stomped on it and return success assuming that the BIOS waited + * for engine idle. + * + * Note: if the Xserver uses the event tag it has to follow the same + * rule. Otherwise there may be glitches every 2^16 events. + */ +static int +savage_bci_wait_event_shadow(drm_savage_private_t *dev_priv, uint16_t e) +{ + uint32_t status; + int i; + + for (i = 0; i < SAVAGE_EVENT_USEC_TIMEOUT; i++) { + DRM_MEMORYBARRIER(); + status = dev_priv->status_ptr[1]; + if ((((status & 0xffff) - e) & 0xffff) <= 0x7fff || + (status & 0xffff) == 0) + return 0; + DRM_UDELAY(1); + } + +#if SAVAGE_BCI_DEBUG + DRM_ERROR("failed!\n"); + DRM_INFO(" status=0x%08x, e=0x%04x\n", status, e); +#endif + + return DRM_ERR(EBUSY); +} + +static int +savage_bci_wait_event_reg(drm_savage_private_t *dev_priv, uint16_t e) +{ + uint32_t status; + int i; + + for (i = 0; i < SAVAGE_EVENT_USEC_TIMEOUT; i++) { + status = SAVAGE_READ(SAVAGE_STATUS_WORD1); + if ((((status & 0xffff) - e) & 0xffff) <= 0x7fff || + (status & 0xffff) == 0) + return 0; + DRM_UDELAY(1); + } + +#if SAVAGE_BCI_DEBUG + DRM_ERROR("failed!\n"); + DRM_INFO(" status=0x%08x, e=0x%04x\n", status, e); +#endif + + return DRM_ERR(EBUSY); +} + +uint16_t savage_bci_emit_event(drm_savage_private_t *dev_priv, + unsigned int flags) +{ + uint16_t count; + BCI_LOCALS; + + if (dev_priv->status_ptr) { + /* coordinate with Xserver */ + count = dev_priv->status_ptr[1023]; + if (count < dev_priv->event_counter) + dev_priv->event_wrap++; + } else { + count = dev_priv->event_counter; + } + count = (count + 1) & 0xffff; + if (count == 0) { + count++; /* See the comment above savage_wait_event_*. */ + dev_priv->event_wrap++; + } + dev_priv->event_counter = count; + if (dev_priv->status_ptr) + dev_priv->status_ptr[1023] = (uint32_t)count; + + if ((flags & (SAVAGE_WAIT_2D | SAVAGE_WAIT_3D))) { + unsigned int wait_cmd = BCI_CMD_WAIT; + if ((flags & SAVAGE_WAIT_2D)) + wait_cmd |= BCI_CMD_WAIT_2D; + if ((flags & SAVAGE_WAIT_3D)) + wait_cmd |= BCI_CMD_WAIT_3D; + BEGIN_BCI(2); + BCI_WRITE(wait_cmd); + } else { + BEGIN_BCI(1); + } + BCI_WRITE(BCI_CMD_UPDATE_EVENT_TAG | (uint32_t)count); + + return count; +} + +/* + * Freelist management + */ +static int savage_freelist_init(drm_device_t *dev) +{ + drm_savage_private_t *dev_priv = dev->dev_private; + drm_device_dma_t *dma = dev->dma; + drm_buf_t *buf; + drm_savage_buf_priv_t *entry; + int i; + DRM_DEBUG("count=%d\n", dma->buf_count); + + dev_priv->head.next = &dev_priv->tail; + dev_priv->head.prev = NULL; + dev_priv->head.buf = NULL; + + dev_priv->tail.next = NULL; + dev_priv->tail.prev = &dev_priv->head; + dev_priv->tail.buf = NULL; + + for (i = 0; i < dma->buf_count; i++) { + buf = dma->buflist[i]; + entry = buf->dev_private; + + SET_AGE(&entry->age, 0, 0); + entry->buf = buf; + + entry->next = dev_priv->head.next; + entry->prev = &dev_priv->head; + dev_priv->head.next->prev = entry; + dev_priv->head.next = entry; + } + + return 0; +} + +static drm_buf_t *savage_freelist_get(drm_device_t *dev) +{ + drm_savage_private_t *dev_priv = dev->dev_private; + drm_savage_buf_priv_t *tail = dev_priv->tail.prev; + uint16_t event; + unsigned int wrap; + DRM_DEBUG("\n"); + + UPDATE_EVENT_COUNTER(); + if (dev_priv->status_ptr) + event = dev_priv->status_ptr[1] & 0xffff; + else + event = SAVAGE_READ(SAVAGE_STATUS_WORD1) & 0xffff; + wrap = dev_priv->event_wrap; + if (event > dev_priv->event_counter) + wrap--; /* hardware hasn't passed the last wrap yet */ + + DRM_DEBUG(" tail=0x%04x %d\n", tail->age.event, tail->age.wrap); + DRM_DEBUG(" head=0x%04x %d\n", event, wrap); + + if (tail->buf && (TEST_AGE(&tail->age, event, wrap) || event == 0)) { + drm_savage_buf_priv_t *next = tail->next; + drm_savage_buf_priv_t *prev = tail->prev; + prev->next = next; + next->prev = prev; + tail->next = tail->prev = NULL; + return tail->buf; + } + + DRM_DEBUG("returning NULL, tail->buf=%p!\n", tail->buf); + return NULL; +} + +void savage_freelist_put(drm_device_t *dev, drm_buf_t *buf) +{ + drm_savage_private_t *dev_priv = dev->dev_private; + drm_savage_buf_priv_t *entry = buf->dev_private, *prev, *next; + + DRM_DEBUG("age=0x%04x wrap=%d\n", entry->age.event, entry->age.wrap); + + if (entry->next != NULL || entry->prev != NULL) { + DRM_ERROR("entry already on freelist.\n"); + return; + } + + prev = &dev_priv->head; + next = prev->next; + prev->next = entry; + next->prev = entry; + entry->prev = prev; + entry->next = next; +} + +/* + * Command DMA + */ +static int savage_dma_init(drm_savage_private_t *dev_priv) +{ + unsigned int i; + + dev_priv->nr_dma_pages = dev_priv->cmd_dma->size / + (SAVAGE_DMA_PAGE_SIZE*4); + dev_priv->dma_pages = drm_alloc(sizeof(drm_savage_dma_page_t) * + dev_priv->nr_dma_pages, + DRM_MEM_DRIVER); + if (dev_priv->dma_pages == NULL) + return DRM_ERR(ENOMEM); + + for (i = 0; i < dev_priv->nr_dma_pages; ++i) { + SET_AGE(&dev_priv->dma_pages[i].age, 0, 0); + dev_priv->dma_pages[i].used = 0; + dev_priv->dma_pages[i].flushed = 0; + } + SET_AGE(&dev_priv->last_dma_age, 0, 0); + + dev_priv->first_dma_page = 0; + dev_priv->current_dma_page = 0; + + return 0; +} + +void savage_dma_reset(drm_savage_private_t *dev_priv) +{ + uint16_t event; + unsigned int wrap, i; + event = savage_bci_emit_event(dev_priv, 0); + wrap = dev_priv->event_wrap; + for (i = 0; i < dev_priv->nr_dma_pages; ++i) { + SET_AGE(&dev_priv->dma_pages[i].age, event, wrap); + dev_priv->dma_pages[i].used = 0; + dev_priv->dma_pages[i].flushed = 0; + } + SET_AGE(&dev_priv->last_dma_age, event, wrap); + dev_priv->first_dma_page = dev_priv->current_dma_page = 0; +} + +void savage_dma_wait(drm_savage_private_t *dev_priv, unsigned int page) +{ + uint16_t event; + unsigned int wrap; + + /* Faked DMA buffer pages don't age. */ + if (dev_priv->cmd_dma == &dev_priv->fake_dma) + return; + + UPDATE_EVENT_COUNTER(); + if (dev_priv->status_ptr) + event = dev_priv->status_ptr[1] & 0xffff; + else + event = SAVAGE_READ(SAVAGE_STATUS_WORD1) & 0xffff; + wrap = dev_priv->event_wrap; + if (event > dev_priv->event_counter) + wrap--; /* hardware hasn't passed the last wrap yet */ + + if (dev_priv->dma_pages[page].age.wrap > wrap || + (dev_priv->dma_pages[page].age.wrap == wrap && + dev_priv->dma_pages[page].age.event > event)) { + if (dev_priv->wait_evnt(dev_priv, + dev_priv->dma_pages[page].age.event) + < 0) + DRM_ERROR("wait_evnt failed!\n"); + } +} + +uint32_t *savage_dma_alloc(drm_savage_private_t *dev_priv, unsigned int n) +{ + unsigned int cur = dev_priv->current_dma_page; + unsigned int rest = SAVAGE_DMA_PAGE_SIZE - + dev_priv->dma_pages[cur].used; + unsigned int nr_pages = (n - rest + SAVAGE_DMA_PAGE_SIZE-1) / + SAVAGE_DMA_PAGE_SIZE; + uint32_t *dma_ptr; + unsigned int i; + + DRM_DEBUG("cur=%u, cur->used=%u, n=%u, rest=%u, nr_pages=%u\n", + cur, dev_priv->dma_pages[cur].used, n, rest, nr_pages); + + if (cur + nr_pages < dev_priv->nr_dma_pages) { + dma_ptr = (uint32_t *)dev_priv->cmd_dma->handle + + cur*SAVAGE_DMA_PAGE_SIZE + + dev_priv->dma_pages[cur].used; + if (n < rest) + rest = n; + dev_priv->dma_pages[cur].used += rest; + n -= rest; + cur++; + } else { + dev_priv->dma_flush(dev_priv); + nr_pages = (n + SAVAGE_DMA_PAGE_SIZE-1) / SAVAGE_DMA_PAGE_SIZE; + for (i = cur; i < dev_priv->nr_dma_pages; ++i) { + dev_priv->dma_pages[i].age = dev_priv->last_dma_age; + dev_priv->dma_pages[i].used = 0; + dev_priv->dma_pages[i].flushed = 0; + } + dma_ptr = (uint32_t *)dev_priv->cmd_dma->handle; + dev_priv->first_dma_page = cur = 0; + } + for (i = cur; nr_pages > 0; ++i, --nr_pages) { +#if SAVAGE_DMA_DEBUG + if (dev_priv->dma_pages[i].used) { + DRM_ERROR("unflushed page %u: used=%u\n", + i, dev_priv->dma_pages[i].used); + } +#endif + if (n > SAVAGE_DMA_PAGE_SIZE) + dev_priv->dma_pages[i].used = SAVAGE_DMA_PAGE_SIZE; + else + dev_priv->dma_pages[i].used = n; + n -= SAVAGE_DMA_PAGE_SIZE; + } + dev_priv->current_dma_page = --i; + + DRM_DEBUG("cur=%u, cur->used=%u, n=%u\n", + i, dev_priv->dma_pages[i].used, n); + + savage_dma_wait(dev_priv, dev_priv->current_dma_page); + + return dma_ptr; +} + +static void savage_dma_flush(drm_savage_private_t *dev_priv) +{ + unsigned int first = dev_priv->first_dma_page; + unsigned int cur = dev_priv->current_dma_page; + uint16_t event; + unsigned int wrap, pad, align, len, i; + unsigned long phys_addr; + BCI_LOCALS; + + if (first == cur && + dev_priv->dma_pages[cur].used == dev_priv->dma_pages[cur].flushed) + return; + + /* pad length to multiples of 2 entries + * align start of next DMA block to multiles of 8 entries */ + pad = -dev_priv->dma_pages[cur].used & 1; + align = -(dev_priv->dma_pages[cur].used + pad) & 7; + + DRM_DEBUG("first=%u, cur=%u, first->flushed=%u, cur->used=%u, " + "pad=%u, align=%u\n", + first, cur, dev_priv->dma_pages[first].flushed, + dev_priv->dma_pages[cur].used, pad, align); + + /* pad with noops */ + if (pad) { + uint32_t *dma_ptr = (uint32_t *)dev_priv->cmd_dma->handle + + cur * SAVAGE_DMA_PAGE_SIZE + + dev_priv->dma_pages[cur].used; + dev_priv->dma_pages[cur].used += pad; + while(pad != 0) { + *dma_ptr++ = BCI_CMD_WAIT; + pad--; + } + } + + DRM_MEMORYBARRIER(); + + /* do flush ... */ + phys_addr = dev_priv->cmd_dma->offset + + (first * SAVAGE_DMA_PAGE_SIZE + + dev_priv->dma_pages[first].flushed) * 4; + len = (cur - first) * SAVAGE_DMA_PAGE_SIZE + + dev_priv->dma_pages[cur].used - + dev_priv->dma_pages[first].flushed; + + DRM_DEBUG("phys_addr=%lx, len=%u\n", + phys_addr | dev_priv->dma_type, len); + + BEGIN_BCI(3); + BCI_SET_REGISTERS(SAVAGE_DMABUFADDR, 1); + BCI_WRITE(phys_addr | dev_priv->dma_type); + BCI_DMA(len); + + /* fix alignment of the start of the next block */ + dev_priv->dma_pages[cur].used += align; + + /* age DMA pages */ + event = savage_bci_emit_event(dev_priv, 0); + wrap = dev_priv->event_wrap; + for (i = first; i < cur; ++i) { + SET_AGE(&dev_priv->dma_pages[i].age, event, wrap); + dev_priv->dma_pages[i].used = 0; + dev_priv->dma_pages[i].flushed = 0; + } + /* age the current page only when it's full */ + if (dev_priv->dma_pages[cur].used == SAVAGE_DMA_PAGE_SIZE) { + SET_AGE(&dev_priv->dma_pages[cur].age, event, wrap); + dev_priv->dma_pages[cur].used = 0; + dev_priv->dma_pages[cur].flushed = 0; + /* advance to next page */ + cur++; + if (cur == dev_priv->nr_dma_pages) + cur = 0; + dev_priv->first_dma_page = dev_priv->current_dma_page = cur; + } else { + dev_priv->first_dma_page = cur; + dev_priv->dma_pages[cur].flushed = dev_priv->dma_pages[i].used; + } + SET_AGE(&dev_priv->last_dma_age, event, wrap); + + DRM_DEBUG("first=cur=%u, cur->used=%u, cur->flushed=%u\n", cur, + dev_priv->dma_pages[cur].used, + dev_priv->dma_pages[cur].flushed); +} + +static void savage_fake_dma_flush(drm_savage_private_t *dev_priv) +{ + unsigned int i, j; + BCI_LOCALS; + + if (dev_priv->first_dma_page == dev_priv->current_dma_page && + dev_priv->dma_pages[dev_priv->current_dma_page].used == 0) + return; + + DRM_DEBUG("first=%u, cur=%u, cur->used=%u\n", + dev_priv->first_dma_page, dev_priv->current_dma_page, + dev_priv->dma_pages[dev_priv->current_dma_page].used); + + for (i = dev_priv->first_dma_page; + i <= dev_priv->current_dma_page && dev_priv->dma_pages[i].used; + ++i) { + uint32_t *dma_ptr = (uint32_t *)dev_priv->cmd_dma->handle + + i * SAVAGE_DMA_PAGE_SIZE; +#if SAVAGE_DMA_DEBUG + /* Sanity check: all pages except the last one must be full. */ + if (i < dev_priv->current_dma_page && + dev_priv->dma_pages[i].used != SAVAGE_DMA_PAGE_SIZE) { + DRM_ERROR("partial DMA page %u: used=%u", + i, dev_priv->dma_pages[i].used); + } +#endif + BEGIN_BCI(dev_priv->dma_pages[i].used); + for (j = 0; j < dev_priv->dma_pages[i].used; ++j) { + BCI_WRITE(dma_ptr[j]); + } + dev_priv->dma_pages[i].used = 0; + } + + /* reset to first page */ + dev_priv->first_dma_page = dev_priv->current_dma_page = 0; +} + +/* + * Initalize mappings. On Savage4 and SavageIX the alignment + * and size of the aperture is not suitable for automatic MTRR setup + * in drm_addmap. Therefore we do it manually before the maps are + * initialized. We also need to take care of deleting the MTRRs in + * postcleanup. + */ +int savage_preinit(drm_device_t *dev, unsigned long chipset) +{ + drm_savage_private_t *dev_priv; + unsigned long mmio_base, fb_base, fb_size, aperture_base; + /* fb_rsrc and aper_rsrc aren't really used currently, but still exist + * in case we decide we need information on the BAR for BSD in the + * future. + */ + unsigned int fb_rsrc, aper_rsrc; + int ret = 0; + + dev_priv = drm_alloc(sizeof(drm_savage_private_t), DRM_MEM_DRIVER); + if (dev_priv == NULL) + return DRM_ERR(ENOMEM); + + memset(dev_priv, 0, sizeof(drm_savage_private_t)); + dev->dev_private = (void *)dev_priv; + dev_priv->chipset = (enum savage_family)chipset; + + dev_priv->mtrr[0].handle = -1; + dev_priv->mtrr[1].handle = -1; + dev_priv->mtrr[2].handle = -1; + if (S3_SAVAGE3D_SERIES(dev_priv->chipset)) { + fb_rsrc = 0; + fb_base = drm_get_resource_start(dev, 0); + fb_size = SAVAGE_FB_SIZE_S3; + mmio_base = fb_base + SAVAGE_FB_SIZE_S3; + aper_rsrc = 0; + aperture_base = fb_base + SAVAGE_APERTURE_OFFSET; + /* this should always be true */ + if (drm_get_resource_len(dev, 0) == 0x08000000) { + /* Don't make MMIO write-cobining! We need 3 + * MTRRs. */ + dev_priv->mtrr[0].base = fb_base; + dev_priv->mtrr[0].size = 0x01000000; + dev_priv->mtrr[0].handle = mtrr_add( + dev_priv->mtrr[0].base, dev_priv->mtrr[0].size, + MTRR_TYPE_WRCOMB, 1); + dev_priv->mtrr[1].base = fb_base+0x02000000; + dev_priv->mtrr[1].size = 0x02000000; + dev_priv->mtrr[1].handle = mtrr_add( + dev_priv->mtrr[1].base, dev_priv->mtrr[1].size, + MTRR_TYPE_WRCOMB, 1); + dev_priv->mtrr[2].base = fb_base+0x04000000; + dev_priv->mtrr[2].size = 0x04000000; + dev_priv->mtrr[2].handle = mtrr_add( + dev_priv->mtrr[2].base, dev_priv->mtrr[2].size, + MTRR_TYPE_WRCOMB, 1); + } else { + DRM_ERROR("strange pci_resource_len %08lx\n", + drm_get_resource_len(dev, 0)); + } + } else if (chipset != S3_SUPERSAVAGE && chipset != S3_SAVAGE2000) { + mmio_base = drm_get_resource_start(dev, 0); + fb_rsrc = 1; + fb_base = drm_get_resource_start(dev, 1); + fb_size = SAVAGE_FB_SIZE_S4; + aper_rsrc = 1; + aperture_base = fb_base + SAVAGE_APERTURE_OFFSET; + /* this should always be true */ + if (drm_get_resource_len(dev, 1) == 0x08000000) { + /* Can use one MTRR to cover both fb and + * aperture. */ + dev_priv->mtrr[0].base = fb_base; + dev_priv->mtrr[0].size = 0x08000000; + dev_priv->mtrr[0].handle = mtrr_add( + dev_priv->mtrr[0].base, dev_priv->mtrr[0].size, + MTRR_TYPE_WRCOMB, 1); + } else { + DRM_ERROR("strange pci_resource_len %08lx\n", + drm_get_resource_len(dev, 1)); + } + } else { + mmio_base = drm_get_resource_start(dev, 0); + fb_rsrc = 1; + fb_base = drm_get_resource_start(dev, 1); + fb_size = drm_get_resource_len(dev, 1); + aper_rsrc = 2; + aperture_base = drm_get_resource_start(dev, 2); + /* Automatic MTRR setup will do the right thing. */ + } + + ret = drm_addmap(dev, mmio_base, SAVAGE_MMIO_SIZE, _DRM_REGISTERS, + _DRM_READ_ONLY, &dev_priv->mmio); + if (ret) + return ret; + + ret = drm_addmap(dev, fb_base, fb_size, _DRM_FRAME_BUFFER, + _DRM_WRITE_COMBINING, &dev_priv->fb); + if (ret) + return ret; + + ret = drm_addmap(dev, aperture_base, SAVAGE_APERTURE_SIZE, + _DRM_FRAME_BUFFER, _DRM_WRITE_COMBINING, + &dev_priv->aperture); + if (ret) + return ret; + + return ret; +} + +/* + * Delete MTRRs and free device-private data. + */ +int savage_postcleanup(drm_device_t *dev) +{ + drm_savage_private_t *dev_priv = dev->dev_private; + int i; + + for (i = 0; i < 3; ++i) + if (dev_priv->mtrr[i].handle >= 0) + mtrr_del(dev_priv->mtrr[i].handle, + dev_priv->mtrr[i].base, + dev_priv->mtrr[i].size); + + drm_free(dev_priv, sizeof(drm_savage_private_t), DRM_MEM_DRIVER); + + return 0; +} + +static int savage_do_init_bci(drm_device_t *dev, drm_savage_init_t *init) +{ + drm_savage_private_t *dev_priv = dev->dev_private; + + if (init->fb_bpp != 16 && init->fb_bpp != 32) { + DRM_ERROR("invalid frame buffer bpp %d!\n", init->fb_bpp); + return DRM_ERR(EINVAL); + } + if (init->depth_bpp != 16 && init->depth_bpp != 32) { + DRM_ERROR("invalid depth buffer bpp %d!\n", init->fb_bpp); + return DRM_ERR(EINVAL); + } + if (init->dma_type != SAVAGE_DMA_AGP && + init->dma_type != SAVAGE_DMA_PCI) { + DRM_ERROR("invalid dma memory type %d!\n", init->dma_type); + return DRM_ERR(EINVAL); + } + + dev_priv->cob_size = init->cob_size; + dev_priv->bci_threshold_lo = init->bci_threshold_lo; + dev_priv->bci_threshold_hi = init->bci_threshold_hi; + dev_priv->dma_type = init->dma_type; + + dev_priv->fb_bpp = init->fb_bpp; + dev_priv->front_offset = init->front_offset; + dev_priv->front_pitch = init->front_pitch; + dev_priv->back_offset = init->back_offset; + dev_priv->back_pitch = init->back_pitch; + dev_priv->depth_bpp = init->depth_bpp; + dev_priv->depth_offset = init->depth_offset; + dev_priv->depth_pitch = init->depth_pitch; + + dev_priv->texture_offset = init->texture_offset; + dev_priv->texture_size = init->texture_size; + + DRM_GETSAREA(); + if (!dev_priv->sarea) { + DRM_ERROR("could not find sarea!\n"); + savage_do_cleanup_bci(dev); + return DRM_ERR(EINVAL); + } + if (init->status_offset != 0) { + dev_priv->status = drm_core_findmap(dev, init->status_offset); + if (!dev_priv->status) { + DRM_ERROR("could not find shadow status region!\n"); + savage_do_cleanup_bci(dev); + return DRM_ERR(EINVAL); + } + } else { + dev_priv->status = NULL; + } + if (dev_priv->dma_type == SAVAGE_DMA_AGP && init->buffers_offset) { + dev->agp_buffer_map = drm_core_findmap(dev, + init->buffers_offset); + if (!dev->agp_buffer_map) { + DRM_ERROR("could not find DMA buffer region!\n"); + savage_do_cleanup_bci(dev); + return DRM_ERR(EINVAL); + } + drm_core_ioremap(dev->agp_buffer_map, dev); + if (!dev->agp_buffer_map) { + DRM_ERROR("failed to ioremap DMA buffer region!\n"); + savage_do_cleanup_bci(dev); + return DRM_ERR(ENOMEM); + } + } + if (init->agp_textures_offset) { + dev_priv->agp_textures = + drm_core_findmap(dev, init->agp_textures_offset); + if (!dev_priv->agp_textures) { + DRM_ERROR("could not find agp texture region!\n"); + savage_do_cleanup_bci(dev); + return DRM_ERR(EINVAL); + } + } else { + dev_priv->agp_textures = NULL; + } + + if (init->cmd_dma_offset) { + if (S3_SAVAGE3D_SERIES(dev_priv->chipset)) { + DRM_ERROR("command DMA not supported on " + "Savage3D/MX/IX.\n"); + savage_do_cleanup_bci(dev); + return DRM_ERR(EINVAL); + } + if (dev->dma && dev->dma->buflist) { + DRM_ERROR("command and vertex DMA not supported " + "at the same time.\n"); + savage_do_cleanup_bci(dev); + return DRM_ERR(EINVAL); + } + dev_priv->cmd_dma = drm_core_findmap(dev, init->cmd_dma_offset); + if (!dev_priv->cmd_dma) { + DRM_ERROR("could not find command DMA region!\n"); + savage_do_cleanup_bci(dev); + return DRM_ERR(EINVAL); + } + if (dev_priv->dma_type == SAVAGE_DMA_AGP) { + if (dev_priv->cmd_dma->type != _DRM_AGP) { + DRM_ERROR("AGP command DMA region is not a " + "_DRM_AGP map!\n"); + savage_do_cleanup_bci(dev); + return DRM_ERR(EINVAL); + } + drm_core_ioremap(dev_priv->cmd_dma, dev); + if (!dev_priv->cmd_dma->handle) { + DRM_ERROR("failed to ioremap command " + "DMA region!\n"); + savage_do_cleanup_bci(dev); + return DRM_ERR(ENOMEM); + } + } else if (dev_priv->cmd_dma->type != _DRM_CONSISTENT) { + DRM_ERROR("PCI command DMA region is not a " + "_DRM_CONSISTENT map!\n"); + savage_do_cleanup_bci(dev); + return DRM_ERR(EINVAL); + } + } else { + dev_priv->cmd_dma = NULL; + } + + dev_priv->dma_flush = savage_dma_flush; + if (!dev_priv->cmd_dma) { + DRM_DEBUG("falling back to faked command DMA.\n"); + dev_priv->fake_dma.offset = 0; + dev_priv->fake_dma.size = SAVAGE_FAKE_DMA_SIZE; + dev_priv->fake_dma.type = _DRM_SHM; + dev_priv->fake_dma.handle = drm_alloc(SAVAGE_FAKE_DMA_SIZE, + DRM_MEM_DRIVER); + if (!dev_priv->fake_dma.handle) { + DRM_ERROR("could not allocate faked DMA buffer!\n"); + savage_do_cleanup_bci(dev); + return DRM_ERR(ENOMEM); + } + dev_priv->cmd_dma = &dev_priv->fake_dma; + dev_priv->dma_flush = savage_fake_dma_flush; + } + + dev_priv->sarea_priv = + (drm_savage_sarea_t *)((uint8_t *)dev_priv->sarea->handle + + init->sarea_priv_offset); + + /* setup bitmap descriptors */ + { + unsigned int color_tile_format; + unsigned int depth_tile_format; + unsigned int front_stride, back_stride, depth_stride; + if (dev_priv->chipset <= S3_SAVAGE4) { + color_tile_format = dev_priv->fb_bpp == 16 ? + SAVAGE_BD_TILE_16BPP : SAVAGE_BD_TILE_32BPP; + depth_tile_format = dev_priv->depth_bpp == 16 ? + SAVAGE_BD_TILE_16BPP : SAVAGE_BD_TILE_32BPP; + } else { + color_tile_format = SAVAGE_BD_TILE_DEST; + depth_tile_format = SAVAGE_BD_TILE_DEST; + } + front_stride = dev_priv->front_pitch / (dev_priv->fb_bpp/8); + back_stride = dev_priv-> back_pitch / (dev_priv->fb_bpp/8); + depth_stride = dev_priv->depth_pitch / (dev_priv->depth_bpp/8); + + dev_priv->front_bd = front_stride | SAVAGE_BD_BW_DISABLE | + (dev_priv->fb_bpp << SAVAGE_BD_BPP_SHIFT) | + (color_tile_format << SAVAGE_BD_TILE_SHIFT); + + dev_priv-> back_bd = back_stride | SAVAGE_BD_BW_DISABLE | + (dev_priv->fb_bpp << SAVAGE_BD_BPP_SHIFT) | + (color_tile_format << SAVAGE_BD_TILE_SHIFT); + + dev_priv->depth_bd = depth_stride | SAVAGE_BD_BW_DISABLE | + (dev_priv->depth_bpp << SAVAGE_BD_BPP_SHIFT) | + (depth_tile_format << SAVAGE_BD_TILE_SHIFT); + } + + /* setup status and bci ptr */ + dev_priv->event_counter = 0; + dev_priv->event_wrap = 0; + dev_priv->bci_ptr = (volatile uint32_t *) + ((uint8_t *)dev_priv->mmio->handle + SAVAGE_BCI_OFFSET); + if (S3_SAVAGE3D_SERIES(dev_priv->chipset)) { + dev_priv->status_used_mask = SAVAGE_FIFO_USED_MASK_S3D; + } else { + dev_priv->status_used_mask = SAVAGE_FIFO_USED_MASK_S4; + } + if (dev_priv->status != NULL) { + dev_priv->status_ptr = + (volatile uint32_t *)dev_priv->status->handle; + dev_priv->wait_fifo = savage_bci_wait_fifo_shadow; + dev_priv->wait_evnt = savage_bci_wait_event_shadow; + dev_priv->status_ptr[1023] = dev_priv->event_counter; + } else { + dev_priv->status_ptr = NULL; + if (S3_SAVAGE3D_SERIES(dev_priv->chipset)) { + dev_priv->wait_fifo = savage_bci_wait_fifo_s3d; + } else { + dev_priv->wait_fifo = savage_bci_wait_fifo_s4; + } + dev_priv->wait_evnt = savage_bci_wait_event_reg; + } + + /* cliprect functions */ + if (S3_SAVAGE3D_SERIES(dev_priv->chipset)) + dev_priv->emit_clip_rect = savage_emit_clip_rect_s3d; + else + dev_priv->emit_clip_rect = savage_emit_clip_rect_s4; + + if (savage_freelist_init(dev) < 0) { + DRM_ERROR("could not initialize freelist\n"); + savage_do_cleanup_bci(dev); + return DRM_ERR(ENOMEM); + } + + if (savage_dma_init(dev_priv) < 0) { + DRM_ERROR("could not initialize command DMA\n"); + savage_do_cleanup_bci(dev); + return DRM_ERR(ENOMEM); + } + + return 0; +} + +int savage_do_cleanup_bci(drm_device_t *dev) +{ + drm_savage_private_t *dev_priv = dev->dev_private; + + if (dev_priv->cmd_dma == &dev_priv->fake_dma) { + if (dev_priv->fake_dma.handle) + drm_free(dev_priv->fake_dma.handle, + SAVAGE_FAKE_DMA_SIZE, DRM_MEM_DRIVER); + } else if (dev_priv->cmd_dma && dev_priv->cmd_dma->handle && + dev_priv->cmd_dma->type == _DRM_AGP && + dev_priv->dma_type == SAVAGE_DMA_AGP) + drm_core_ioremapfree(dev_priv->cmd_dma, dev); + + if (dev_priv->dma_type == SAVAGE_DMA_AGP && + dev->agp_buffer_map && dev->agp_buffer_map->handle) { + drm_core_ioremapfree(dev->agp_buffer_map, dev); + /* make sure the next instance (which may be running + * in PCI mode) doesn't try to use an old + * agp_buffer_map. */ + dev->agp_buffer_map = NULL; + } + + if (dev_priv->dma_pages) + drm_free(dev_priv->dma_pages, + sizeof(drm_savage_dma_page_t)*dev_priv->nr_dma_pages, + DRM_MEM_DRIVER); + + return 0; +} + +static int savage_bci_init(DRM_IOCTL_ARGS) +{ + DRM_DEVICE; + drm_savage_init_t init; + + LOCK_TEST_WITH_RETURN(dev, filp); + + DRM_COPY_FROM_USER_IOCTL(init, (drm_savage_init_t __user *)data, + sizeof(init)); + + switch (init.func) { + case SAVAGE_INIT_BCI: + return savage_do_init_bci(dev, &init); + case SAVAGE_CLEANUP_BCI: + return savage_do_cleanup_bci(dev); + } + + return DRM_ERR(EINVAL); +} + +static int savage_bci_event_emit(DRM_IOCTL_ARGS) +{ + DRM_DEVICE; + drm_savage_private_t *dev_priv = dev->dev_private; + drm_savage_event_emit_t event; + + DRM_DEBUG("\n"); + + LOCK_TEST_WITH_RETURN(dev, filp); + + DRM_COPY_FROM_USER_IOCTL(event, (drm_savage_event_emit_t __user *)data, + sizeof(event)); + + event.count = savage_bci_emit_event(dev_priv, event.flags); + event.count |= dev_priv->event_wrap << 16; + DRM_COPY_TO_USER_IOCTL(&((drm_savage_event_emit_t __user *)data)->count, + event.count, sizeof(event.count)); + return 0; +} + +static int savage_bci_event_wait(DRM_IOCTL_ARGS) +{ + DRM_DEVICE; + drm_savage_private_t *dev_priv = dev->dev_private; + drm_savage_event_wait_t event; + unsigned int event_e, hw_e; + unsigned int event_w, hw_w; + + DRM_DEBUG("\n"); + + DRM_COPY_FROM_USER_IOCTL(event, (drm_savage_event_wait_t __user *)data, + sizeof(event)); + + UPDATE_EVENT_COUNTER(); + if (dev_priv->status_ptr) + hw_e = dev_priv->status_ptr[1] & 0xffff; + else + hw_e = SAVAGE_READ(SAVAGE_STATUS_WORD1) & 0xffff; + hw_w = dev_priv->event_wrap; + if (hw_e > dev_priv->event_counter) + hw_w--; /* hardware hasn't passed the last wrap yet */ + + event_e = event.count & 0xffff; + event_w = event.count >> 16; + + /* Don't need to wait if + * - event counter wrapped since the event was emitted or + * - the hardware has advanced up to or over the event to wait for. + */ + if (event_w < hw_w || (event_w == hw_w && event_e <= hw_e) ) + return 0; + else + return dev_priv->wait_evnt(dev_priv, event_e); +} + +/* + * DMA buffer management + */ + +static int savage_bci_get_buffers(DRMFILE filp, drm_device_t *dev, drm_dma_t *d) +{ + drm_buf_t *buf; + int i; + + for (i = d->granted_count; i < d->request_count; i++) { + buf = savage_freelist_get(dev); + if (!buf) + return DRM_ERR(EAGAIN); + + buf->filp = filp; + + if (DRM_COPY_TO_USER(&d->request_indices[i], + &buf->idx, sizeof(buf->idx))) + return DRM_ERR(EFAULT); + if (DRM_COPY_TO_USER(&d->request_sizes[i], + &buf->total, sizeof(buf->total))) + return DRM_ERR(EFAULT); + + d->granted_count++; + } + return 0; +} + +int savage_bci_buffers(DRM_IOCTL_ARGS) +{ + DRM_DEVICE; + drm_device_dma_t *dma = dev->dma; + drm_dma_t d; + int ret = 0; + + LOCK_TEST_WITH_RETURN(dev, filp); + + DRM_COPY_FROM_USER_IOCTL(d, (drm_dma_t __user *)data, sizeof(d)); + + /* Please don't send us buffers. + */ + if (d.send_count != 0) { + DRM_ERROR("Process %d trying to send %d buffers via drmDMA\n", + DRM_CURRENTPID, d.send_count); + return DRM_ERR(EINVAL); + } + + /* We'll send you buffers. + */ + if (d.request_count < 0 || d.request_count > dma->buf_count) { + DRM_ERROR("Process %d trying to get %d buffers (of %d max)\n", + DRM_CURRENTPID, d.request_count, dma->buf_count); + return DRM_ERR(EINVAL); + } + + d.granted_count = 0; + + if (d.request_count) { + ret = savage_bci_get_buffers(filp, dev, &d); + } + + DRM_COPY_TO_USER_IOCTL((drm_dma_t __user *)data, d, sizeof(d)); + + return ret; +} + +void savage_reclaim_buffers(drm_device_t *dev, DRMFILE filp) { + drm_device_dma_t *dma = dev->dma; + drm_savage_private_t *dev_priv = dev->dev_private; + int i; + + if (!dma) + return; + if (!dev_priv) + return; + if (!dma->buflist) + return; + + /*i830_flush_queue(dev);*/ + + for (i = 0; i < dma->buf_count; i++) { + drm_buf_t *buf = dma->buflist[i]; + drm_savage_buf_priv_t *buf_priv = buf->dev_private; + + if (buf->filp == filp && buf_priv && + buf_priv->next == NULL && buf_priv->prev == NULL) { + uint16_t event; + DRM_DEBUG("reclaimed from client\n"); + event = savage_bci_emit_event(dev_priv, SAVAGE_WAIT_3D); + SET_AGE(&buf_priv->age, event, dev_priv->event_wrap); + savage_freelist_put(dev, buf); + } + } + + drm_core_reclaim_buffers(dev, filp); +} + + +drm_ioctl_desc_t savage_ioctls[] = { + [DRM_IOCTL_NR(DRM_SAVAGE_BCI_INIT)] = {savage_bci_init, 1, 1}, + [DRM_IOCTL_NR(DRM_SAVAGE_BCI_CMDBUF)] = {savage_bci_cmdbuf, 1, 0}, + [DRM_IOCTL_NR(DRM_SAVAGE_BCI_EVENT_EMIT)] = {savage_bci_event_emit, 1, 0}, + [DRM_IOCTL_NR(DRM_SAVAGE_BCI_EVENT_WAIT)] = {savage_bci_event_wait, 1, 0}, +}; + +int savage_max_ioctl = DRM_ARRAY_SIZE(savage_ioctls); diff --git a/drivers/char/drm/savage_drm.h b/drivers/char/drm/savage_drm.h new file mode 100644 index 000000000000..6526c9aa7589 --- /dev/null +++ b/drivers/char/drm/savage_drm.h @@ -0,0 +1,209 @@ +/* savage_drm.h -- Public header for the savage driver + * + * Copyright 2004 Felix Kuehling + * All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NON-INFRINGEMENT. IN NO EVENT SHALL FELIX KUEHLING BE LIABLE FOR + * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF + * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION + * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef __SAVAGE_DRM_H__ +#define __SAVAGE_DRM_H__ + +#ifndef __SAVAGE_SAREA_DEFINES__ +#define __SAVAGE_SAREA_DEFINES__ + +/* 2 heaps (1 for card, 1 for agp), each divided into upto 128 + * regions, subject to a minimum region size of (1<<16) == 64k. + * + * Clients may subdivide regions internally, but when sharing between + * clients, the region size is the minimum granularity. + */ + +#define SAVAGE_CARD_HEAP 0 +#define SAVAGE_AGP_HEAP 1 +#define SAVAGE_NR_TEX_HEAPS 2 +#define SAVAGE_NR_TEX_REGIONS 16 +#define SAVAGE_LOG_MIN_TEX_REGION_SIZE 16 + +#endif /* __SAVAGE_SAREA_DEFINES__ */ + +typedef struct _drm_savage_sarea { + /* LRU lists for texture memory in agp space and on the card. + */ + drm_tex_region_t texList[SAVAGE_NR_TEX_HEAPS][SAVAGE_NR_TEX_REGIONS+1]; + unsigned int texAge[SAVAGE_NR_TEX_HEAPS]; + + /* Mechanism to validate card state. + */ + int ctxOwner; +} drm_savage_sarea_t, *drm_savage_sarea_ptr; + +/* Savage-specific ioctls + */ +#define DRM_SAVAGE_BCI_INIT 0x00 +#define DRM_SAVAGE_BCI_CMDBUF 0x01 +#define DRM_SAVAGE_BCI_EVENT_EMIT 0x02 +#define DRM_SAVAGE_BCI_EVENT_WAIT 0x03 + +#define DRM_IOCTL_SAVAGE_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_SAVAGE_BCI_INIT, drm_savage_init_t) +#define DRM_IOCTL_SAVAGE_CMDBUF DRM_IOW( DRM_COMMAND_BASE + DRM_SAVAGE_BCI_CMDBUF, drm_savage_cmdbuf_t) +#define DRM_IOCTL_SAVAGE_EVENT_EMIT DRM_IOWR(DRM_COMMAND_BASE + DRM_SAVAGE_BCI_EVENT_EMIT, drm_savage_event_emit_t) +#define DRM_IOCTL_SAVAGE_EVENT_WAIT DRM_IOW( DRM_COMMAND_BASE + DRM_SAVAGE_BCI_EVENT_WAIT, drm_savage_event_wait_t) + +#define SAVAGE_DMA_PCI 1 +#define SAVAGE_DMA_AGP 3 +typedef struct drm_savage_init { + enum { + SAVAGE_INIT_BCI = 1, + SAVAGE_CLEANUP_BCI = 2 + } func; + unsigned int sarea_priv_offset; + + /* some parameters */ + unsigned int cob_size; + unsigned int bci_threshold_lo, bci_threshold_hi; + unsigned int dma_type; + + /* frame buffer layout */ + unsigned int fb_bpp; + unsigned int front_offset, front_pitch; + unsigned int back_offset, back_pitch; + unsigned int depth_bpp; + unsigned int depth_offset, depth_pitch; + + /* local textures */ + unsigned int texture_offset; + unsigned int texture_size; + + /* physical locations of non-permanent maps */ + unsigned long status_offset; + unsigned long buffers_offset; + unsigned long agp_textures_offset; + unsigned long cmd_dma_offset; +} drm_savage_init_t; + +typedef union drm_savage_cmd_header drm_savage_cmd_header_t; +typedef struct drm_savage_cmdbuf { + /* command buffer in client's address space */ + drm_savage_cmd_header_t __user *cmd_addr; + unsigned int size; /* size of the command buffer in 64bit units */ + + unsigned int dma_idx; /* DMA buffer index to use */ + int discard; /* discard DMA buffer when done */ + /* vertex buffer in client's address space */ + unsigned int __user *vb_addr; + unsigned int vb_size; /* size of client vertex buffer in bytes */ + unsigned int vb_stride; /* stride of vertices in 32bit words */ + /* boxes in client's address space */ + drm_clip_rect_t __user *box_addr; + unsigned int nbox; /* number of clipping boxes */ +} drm_savage_cmdbuf_t; + +#define SAVAGE_WAIT_2D 0x1 /* wait for 2D idle before updating event tag */ +#define SAVAGE_WAIT_3D 0x2 /* wait for 3D idle before updating event tag */ +#define SAVAGE_WAIT_IRQ 0x4 /* emit or wait for IRQ, not implemented yet */ +typedef struct drm_savage_event { + unsigned int count; + unsigned int flags; +} drm_savage_event_emit_t, drm_savage_event_wait_t; + +/* Commands for the cmdbuf ioctl + */ +#define SAVAGE_CMD_STATE 0 /* a range of state registers */ +#define SAVAGE_CMD_DMA_PRIM 1 /* vertices from DMA buffer */ +#define SAVAGE_CMD_VB_PRIM 2 /* vertices from client vertex buffer */ +#define SAVAGE_CMD_DMA_IDX 3 /* indexed vertices from DMA buffer */ +#define SAVAGE_CMD_VB_IDX 4 /* indexed vertices client vertex buffer */ +#define SAVAGE_CMD_CLEAR 5 /* clear buffers */ +#define SAVAGE_CMD_SWAP 6 /* swap buffers */ + +/* Primitive types +*/ +#define SAVAGE_PRIM_TRILIST 0 /* triangle list */ +#define SAVAGE_PRIM_TRISTRIP 1 /* triangle strip */ +#define SAVAGE_PRIM_TRIFAN 2 /* triangle fan */ +#define SAVAGE_PRIM_TRILIST_201 3 /* reorder verts for correct flat + * shading on s3d */ + +/* Skip flags (vertex format) + */ +#define SAVAGE_SKIP_Z 0x01 +#define SAVAGE_SKIP_W 0x02 +#define SAVAGE_SKIP_C0 0x04 +#define SAVAGE_SKIP_C1 0x08 +#define SAVAGE_SKIP_S0 0x10 +#define SAVAGE_SKIP_T0 0x20 +#define SAVAGE_SKIP_ST0 0x30 +#define SAVAGE_SKIP_S1 0x40 +#define SAVAGE_SKIP_T1 0x80 +#define SAVAGE_SKIP_ST1 0xc0 +#define SAVAGE_SKIP_ALL_S3D 0x3f +#define SAVAGE_SKIP_ALL_S4 0xff + +/* Buffer names for clear command + */ +#define SAVAGE_FRONT 0x1 +#define SAVAGE_BACK 0x2 +#define SAVAGE_DEPTH 0x4 + +/* 64-bit command header + */ +union drm_savage_cmd_header { + struct { + unsigned char cmd; /* command */ + unsigned char pad0; + unsigned short pad1; + unsigned short pad2; + unsigned short pad3; + } cmd; /* generic */ + struct { + unsigned char cmd; + unsigned char global; /* need idle engine? */ + unsigned short count; /* number of consecutive registers */ + unsigned short start; /* first register */ + unsigned short pad3; + } state; /* SAVAGE_CMD_STATE */ + struct { + unsigned char cmd; + unsigned char prim; /* primitive type */ + unsigned short skip; /* vertex format (skip flags) */ + unsigned short count; /* number of vertices */ + unsigned short start; /* first vertex in DMA/vertex buffer */ + } prim; /* SAVAGE_CMD_DMA_PRIM, SAVAGE_CMD_VB_PRIM */ + struct { + unsigned char cmd; + unsigned char prim; + unsigned short skip; + unsigned short count; /* number of indices that follow */ + unsigned short pad3; + } idx; /* SAVAGE_CMD_DMA_IDX, SAVAGE_CMD_VB_IDX */ + struct { + unsigned char cmd; + unsigned char pad0; + unsigned short pad1; + unsigned int flags; + } clear0; /* SAVAGE_CMD_CLEAR */ + struct { + unsigned int mask; + unsigned int value; + } clear1; /* SAVAGE_CMD_CLEAR data */ +}; + +#endif diff --git a/drivers/char/drm/savage_drv.c b/drivers/char/drm/savage_drv.c new file mode 100644 index 000000000000..ac8d270427ca --- /dev/null +++ b/drivers/char/drm/savage_drv.c @@ -0,0 +1,112 @@ +/* savage_drv.c -- Savage driver for Linux + * + * Copyright 2004 Felix Kuehling + * All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NON-INFRINGEMENT. IN NO EVENT SHALL FELIX KUEHLING BE LIABLE FOR + * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF + * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION + * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <linux/config.h> +#include "drmP.h" +#include "savage_drm.h" +#include "savage_drv.h" + +#include "drm_pciids.h" + +static int postinit( struct drm_device *dev, unsigned long flags ) +{ + DRM_INFO( "Initialized %s %d.%d.%d %s on minor %d: %s\n", + DRIVER_NAME, + DRIVER_MAJOR, + DRIVER_MINOR, + DRIVER_PATCHLEVEL, + DRIVER_DATE, + dev->primary.minor, + pci_pretty_name(dev->pdev) + ); + return 0; +} + +static int version( drm_version_t *version ) +{ + int len; + + version->version_major = DRIVER_MAJOR; + version->version_minor = DRIVER_MINOR; + version->version_patchlevel = DRIVER_PATCHLEVEL; + DRM_COPY( version->name, DRIVER_NAME ); + DRM_COPY( version->date, DRIVER_DATE ); + DRM_COPY( version->desc, DRIVER_DESC ); + return 0; +} + +static struct pci_device_id pciidlist[] = { + savage_PCI_IDS +}; + +extern drm_ioctl_desc_t savage_ioctls[]; +extern int savage_max_ioctl; + +static struct drm_driver driver = { + .driver_features = + DRIVER_USE_AGP | DRIVER_USE_MTRR | + DRIVER_HAVE_DMA | DRIVER_PCI_DMA, + .dev_priv_size = sizeof(drm_savage_buf_priv_t), + .preinit = savage_preinit, + .postinit = postinit, + .postcleanup = savage_postcleanup, + .reclaim_buffers = savage_reclaim_buffers, + .get_map_ofs = drm_core_get_map_ofs, + .get_reg_ofs = drm_core_get_reg_ofs, + .version = version, + .ioctls = savage_ioctls, + .dma_ioctl = savage_bci_buffers, + .fops = { + .owner = THIS_MODULE, + .open = drm_open, + .release = drm_release, + .ioctl = drm_ioctl, + .mmap = drm_mmap, + .poll = drm_poll, + .fasync = drm_fasync, + }, + .pci_driver = { + .name = DRIVER_NAME, + .id_table = pciidlist, + } +}; + +static int __init savage_init(void) +{ + driver.num_ioctls = savage_max_ioctl; + return drm_init(&driver); +} + +static void __exit savage_exit(void) +{ + drm_exit(&driver); +} + +module_init(savage_init); +module_exit(savage_exit); + +MODULE_AUTHOR( DRIVER_AUTHOR ); +MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_LICENSE("GPL and additional rights"); diff --git a/drivers/char/drm/savage_drv.h b/drivers/char/drm/savage_drv.h new file mode 100644 index 000000000000..a45434944658 --- /dev/null +++ b/drivers/char/drm/savage_drv.h @@ -0,0 +1,579 @@ +/* savage_drv.h -- Private header for the savage driver + * + * Copyright 2004 Felix Kuehling + * All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NON-INFRINGEMENT. IN NO EVENT SHALL FELIX KUEHLING BE LIABLE FOR + * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF + * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION + * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef __SAVAGE_DRV_H__ +#define __SAVAGE_DRV_H__ + +#define DRIVER_AUTHOR "Felix Kuehling" + +#define DRIVER_NAME "savage" +#define DRIVER_DESC "Savage3D/MX/IX, Savage4, SuperSavage, Twister, ProSavage[DDR]" +#define DRIVER_DATE "20050313" + +#define DRIVER_MAJOR 2 +#define DRIVER_MINOR 4 +#define DRIVER_PATCHLEVEL 1 +/* Interface history: + * + * 1.x The DRM driver from the VIA/S3 code drop, basically a dummy + * 2.0 The first real DRM + * 2.1 Scissors registers managed by the DRM, 3D operations clipped by + * cliprects of the cmdbuf ioctl + * 2.2 Implemented SAVAGE_CMD_DMA_IDX and SAVAGE_CMD_VB_IDX + * 2.3 Event counters used by BCI_EVENT_EMIT/WAIT ioctls are now 32 bits + * wide and thus very long lived (unlikely to ever wrap). The size + * in the struct was 32 bits before, but only 16 bits were used + * 2.4 Implemented command DMA. Now drm_savage_init_t.cmd_dma_offset is + * actually used + */ + +typedef struct drm_savage_age { + uint16_t event; + unsigned int wrap; +} drm_savage_age_t; + +typedef struct drm_savage_buf_priv { + struct drm_savage_buf_priv *next; + struct drm_savage_buf_priv *prev; + drm_savage_age_t age; + drm_buf_t *buf; +} drm_savage_buf_priv_t; + +typedef struct drm_savage_dma_page { + drm_savage_age_t age; + unsigned int used, flushed; +} drm_savage_dma_page_t; +#define SAVAGE_DMA_PAGE_SIZE 1024 /* in dwords */ +/* Fake DMA buffer size in bytes. 4 pages. Allows a maximum command + * size of 16kbytes or 4k entries. Minimum requirement would be + * 10kbytes for 255 40-byte vertices in one drawing command. */ +#define SAVAGE_FAKE_DMA_SIZE (SAVAGE_DMA_PAGE_SIZE*4*4) + +/* interesting bits of hardware state that are saved in dev_priv */ +typedef union { + struct drm_savage_common_state { + uint32_t vbaddr; + } common; + struct { + unsigned char pad[sizeof(struct drm_savage_common_state)]; + uint32_t texctrl, texaddr; + uint32_t scstart, new_scstart; + uint32_t scend, new_scend; + } s3d; + struct { + unsigned char pad[sizeof(struct drm_savage_common_state)]; + uint32_t texdescr, texaddr0, texaddr1; + uint32_t drawctrl0, new_drawctrl0; + uint32_t drawctrl1, new_drawctrl1; + } s4; +} drm_savage_state_t; + +/* these chip tags should match the ones in the 2D driver in savage_regs.h. */ +enum savage_family { + S3_UNKNOWN = 0, + S3_SAVAGE3D, + S3_SAVAGE_MX, + S3_SAVAGE4, + S3_PROSAVAGE, + S3_TWISTER, + S3_PROSAVAGEDDR, + S3_SUPERSAVAGE, + S3_SAVAGE2000, + S3_LAST +}; + +#define S3_SAVAGE3D_SERIES(chip) ((chip>=S3_SAVAGE3D) && (chip<=S3_SAVAGE_MX)) + +#define S3_SAVAGE4_SERIES(chip) ((chip==S3_SAVAGE4) \ + || (chip==S3_PROSAVAGE) \ + || (chip==S3_TWISTER) \ + || (chip==S3_PROSAVAGEDDR)) + +#define S3_SAVAGE_MOBILE_SERIES(chip) ((chip==S3_SAVAGE_MX) || (chip==S3_SUPERSAVAGE)) + +#define S3_SAVAGE_SERIES(chip) ((chip>=S3_SAVAGE3D) && (chip<=S3_SAVAGE2000)) + +#define S3_MOBILE_TWISTER_SERIES(chip) ((chip==S3_TWISTER) \ + ||(chip==S3_PROSAVAGEDDR)) + +/* flags */ +#define SAVAGE_IS_AGP 1 + +typedef struct drm_savage_private { + drm_savage_sarea_t *sarea_priv; + + drm_savage_buf_priv_t head, tail; + + /* who am I? */ + enum savage_family chipset; + + unsigned int cob_size; + unsigned int bci_threshold_lo, bci_threshold_hi; + unsigned int dma_type; + + /* frame buffer layout */ + unsigned int fb_bpp; + unsigned int front_offset, front_pitch; + unsigned int back_offset, back_pitch; + unsigned int depth_bpp; + unsigned int depth_offset, depth_pitch; + + /* bitmap descriptors for swap and clear */ + unsigned int front_bd, back_bd, depth_bd; + + /* local textures */ + unsigned int texture_offset; + unsigned int texture_size; + + /* memory regions in physical memory */ + drm_local_map_t *sarea; + drm_local_map_t *mmio; + drm_local_map_t *fb; + drm_local_map_t *aperture; + drm_local_map_t *status; + drm_local_map_t *agp_textures; + drm_local_map_t *cmd_dma; + drm_local_map_t fake_dma; + + struct { + int handle; + unsigned long base, size; + } mtrr[3]; + + /* BCI and status-related stuff */ + volatile uint32_t *status_ptr, *bci_ptr; + uint32_t status_used_mask; + uint16_t event_counter; + unsigned int event_wrap; + + /* Savage4 command DMA */ + drm_savage_dma_page_t *dma_pages; + unsigned int nr_dma_pages, first_dma_page, current_dma_page; + drm_savage_age_t last_dma_age; + + /* saved hw state for global/local check on S3D */ + uint32_t hw_draw_ctrl, hw_zbuf_ctrl; + /* and for scissors (global, so don't emit if not changed) */ + uint32_t hw_scissors_start, hw_scissors_end; + + drm_savage_state_t state; + + /* after emitting a wait cmd Savage3D needs 63 nops before next DMA */ + unsigned int waiting; + + /* config/hardware-dependent function pointers */ + int (*wait_fifo)(struct drm_savage_private *dev_priv, unsigned int n); + int (*wait_evnt)(struct drm_savage_private *dev_priv, uint16_t e); + /* Err, there is a macro wait_event in include/linux/wait.h. + * Avoid unwanted macro expansion. */ + void (*emit_clip_rect)(struct drm_savage_private *dev_priv, + drm_clip_rect_t *pbox); + void (*dma_flush)(struct drm_savage_private *dev_priv); +} drm_savage_private_t; + +/* ioctls */ +extern int savage_bci_cmdbuf(DRM_IOCTL_ARGS); +extern int savage_bci_buffers(DRM_IOCTL_ARGS); + +/* BCI functions */ +extern uint16_t savage_bci_emit_event(drm_savage_private_t *dev_priv, + unsigned int flags); +extern void savage_freelist_put(drm_device_t *dev, drm_buf_t *buf); +extern void savage_dma_reset(drm_savage_private_t *dev_priv); +extern void savage_dma_wait(drm_savage_private_t *dev_priv, unsigned int page); +extern uint32_t *savage_dma_alloc(drm_savage_private_t *dev_priv, + unsigned int n); +extern int savage_preinit(drm_device_t *dev, unsigned long chipset); +extern int savage_postcleanup(drm_device_t *dev); +extern int savage_do_cleanup_bci(drm_device_t *dev); +extern void savage_reclaim_buffers(drm_device_t *dev, DRMFILE filp); + +/* state functions */ +extern void savage_emit_clip_rect_s3d(drm_savage_private_t *dev_priv, + drm_clip_rect_t *pbox); +extern void savage_emit_clip_rect_s4(drm_savage_private_t *dev_priv, + drm_clip_rect_t *pbox); + +#define SAVAGE_FB_SIZE_S3 0x01000000 /* 16MB */ +#define SAVAGE_FB_SIZE_S4 0x02000000 /* 32MB */ +#define SAVAGE_MMIO_SIZE 0x00080000 /* 512kB */ +#define SAVAGE_APERTURE_OFFSET 0x02000000 /* 32MB */ +#define SAVAGE_APERTURE_SIZE 0x05000000 /* 5 tiled surfaces, 16MB each */ + +#define SAVAGE_BCI_OFFSET 0x00010000 /* offset of the BCI region + * inside the MMIO region */ +#define SAVAGE_BCI_FIFO_SIZE 32 /* number of entries in on-chip + * BCI FIFO */ + +/* + * MMIO registers + */ +#define SAVAGE_STATUS_WORD0 0x48C00 +#define SAVAGE_STATUS_WORD1 0x48C04 +#define SAVAGE_ALT_STATUS_WORD0 0x48C60 + +#define SAVAGE_FIFO_USED_MASK_S3D 0x0001ffff +#define SAVAGE_FIFO_USED_MASK_S4 0x001fffff + +/* Copied from savage_bci.h in the 2D driver with some renaming. */ + +/* Bitmap descriptors */ +#define SAVAGE_BD_STRIDE_SHIFT 0 +#define SAVAGE_BD_BPP_SHIFT 16 +#define SAVAGE_BD_TILE_SHIFT 24 +#define SAVAGE_BD_BW_DISABLE (1<<28) +/* common: */ +#define SAVAGE_BD_TILE_LINEAR 0 +/* savage4, MX, IX, 3D */ +#define SAVAGE_BD_TILE_16BPP 2 +#define SAVAGE_BD_TILE_32BPP 3 +/* twister, prosavage, DDR, supersavage, 2000 */ +#define SAVAGE_BD_TILE_DEST 1 +#define SAVAGE_BD_TILE_TEXTURE 2 +/* GBD - BCI enable */ +/* savage4, MX, IX, 3D */ +#define SAVAGE_GBD_BCI_ENABLE 8 +/* twister, prosavage, DDR, supersavage, 2000 */ +#define SAVAGE_GBD_BCI_ENABLE_TWISTER 0 + +#define SAVAGE_GBD_BIG_ENDIAN 4 +#define SAVAGE_GBD_LITTLE_ENDIAN 0 +#define SAVAGE_GBD_64 1 + +/* Global Bitmap Descriptor */ +#define SAVAGE_BCI_GLB_BD_LOW 0x8168 +#define SAVAGE_BCI_GLB_BD_HIGH 0x816C + +/* + * BCI registers + */ +/* Savage4/Twister/ProSavage 3D registers */ +#define SAVAGE_DRAWLOCALCTRL_S4 0x1e +#define SAVAGE_TEXPALADDR_S4 0x1f +#define SAVAGE_TEXCTRL0_S4 0x20 +#define SAVAGE_TEXCTRL1_S4 0x21 +#define SAVAGE_TEXADDR0_S4 0x22 +#define SAVAGE_TEXADDR1_S4 0x23 +#define SAVAGE_TEXBLEND0_S4 0x24 +#define SAVAGE_TEXBLEND1_S4 0x25 +#define SAVAGE_TEXXPRCLR_S4 0x26 /* never used */ +#define SAVAGE_TEXDESCR_S4 0x27 +#define SAVAGE_FOGTABLE_S4 0x28 +#define SAVAGE_FOGCTRL_S4 0x30 +#define SAVAGE_STENCILCTRL_S4 0x31 +#define SAVAGE_ZBUFCTRL_S4 0x32 +#define SAVAGE_ZBUFOFF_S4 0x33 +#define SAVAGE_DESTCTRL_S4 0x34 +#define SAVAGE_DRAWCTRL0_S4 0x35 +#define SAVAGE_DRAWCTRL1_S4 0x36 +#define SAVAGE_ZWATERMARK_S4 0x37 +#define SAVAGE_DESTTEXRWWATERMARK_S4 0x38 +#define SAVAGE_TEXBLENDCOLOR_S4 0x39 +/* Savage3D/MX/IX 3D registers */ +#define SAVAGE_TEXPALADDR_S3D 0x18 +#define SAVAGE_TEXXPRCLR_S3D 0x19 /* never used */ +#define SAVAGE_TEXADDR_S3D 0x1A +#define SAVAGE_TEXDESCR_S3D 0x1B +#define SAVAGE_TEXCTRL_S3D 0x1C +#define SAVAGE_FOGTABLE_S3D 0x20 +#define SAVAGE_FOGCTRL_S3D 0x30 +#define SAVAGE_DRAWCTRL_S3D 0x31 +#define SAVAGE_ZBUFCTRL_S3D 0x32 +#define SAVAGE_ZBUFOFF_S3D 0x33 +#define SAVAGE_DESTCTRL_S3D 0x34 +#define SAVAGE_SCSTART_S3D 0x35 +#define SAVAGE_SCEND_S3D 0x36 +#define SAVAGE_ZWATERMARK_S3D 0x37 +#define SAVAGE_DESTTEXRWWATERMARK_S3D 0x38 +/* common stuff */ +#define SAVAGE_VERTBUFADDR 0x3e +#define SAVAGE_BITPLANEWTMASK 0xd7 +#define SAVAGE_DMABUFADDR 0x51 + +/* texture enable bits (needed for tex addr checking) */ +#define SAVAGE_TEXCTRL_TEXEN_MASK 0x00010000 /* S3D */ +#define SAVAGE_TEXDESCR_TEX0EN_MASK 0x02000000 /* S4 */ +#define SAVAGE_TEXDESCR_TEX1EN_MASK 0x04000000 /* S4 */ + +/* Global fields in Savage4/Twister/ProSavage 3D registers: + * + * All texture registers and DrawLocalCtrl are local. All other + * registers are global. */ + +/* Global fields in Savage3D/MX/IX 3D registers: + * + * All texture registers are local. DrawCtrl and ZBufCtrl are + * partially local. All other registers are global. + * + * DrawCtrl global fields: cullMode, alphaTestCmpFunc, alphaTestEn, alphaRefVal + * ZBufCtrl global fields: zCmpFunc, zBufEn + */ +#define SAVAGE_DRAWCTRL_S3D_GLOBAL 0x03f3c00c +#define SAVAGE_ZBUFCTRL_S3D_GLOBAL 0x00000027 + +/* Masks for scissor bits (drawCtrl[01] on s4, scissorStart/End on s3d) + */ +#define SAVAGE_SCISSOR_MASK_S4 0x00fff7ff +#define SAVAGE_SCISSOR_MASK_S3D 0x07ff07ff + +/* + * BCI commands + */ +#define BCI_CMD_NOP 0x40000000 +#define BCI_CMD_RECT 0x48000000 +#define BCI_CMD_RECT_XP 0x01000000 +#define BCI_CMD_RECT_YP 0x02000000 +#define BCI_CMD_SCANLINE 0x50000000 +#define BCI_CMD_LINE 0x5C000000 +#define BCI_CMD_LINE_LAST_PIXEL 0x58000000 +#define BCI_CMD_BYTE_TEXT 0x63000000 +#define BCI_CMD_NT_BYTE_TEXT 0x67000000 +#define BCI_CMD_BIT_TEXT 0x6C000000 +#define BCI_CMD_GET_ROP(cmd) (((cmd) >> 16) & 0xFF) +#define BCI_CMD_SET_ROP(cmd, rop) ((cmd) |= ((rop & 0xFF) << 16)) +#define BCI_CMD_SEND_COLOR 0x00008000 + +#define BCI_CMD_CLIP_NONE 0x00000000 +#define BCI_CMD_CLIP_CURRENT 0x00002000 +#define BCI_CMD_CLIP_LR 0x00004000 +#define BCI_CMD_CLIP_NEW 0x00006000 + +#define BCI_CMD_DEST_GBD 0x00000000 +#define BCI_CMD_DEST_PBD 0x00000800 +#define BCI_CMD_DEST_PBD_NEW 0x00000C00 +#define BCI_CMD_DEST_SBD 0x00001000 +#define BCI_CMD_DEST_SBD_NEW 0x00001400 + +#define BCI_CMD_SRC_TRANSPARENT 0x00000200 +#define BCI_CMD_SRC_SOLID 0x00000000 +#define BCI_CMD_SRC_GBD 0x00000020 +#define BCI_CMD_SRC_COLOR 0x00000040 +#define BCI_CMD_SRC_MONO 0x00000060 +#define BCI_CMD_SRC_PBD_COLOR 0x00000080 +#define BCI_CMD_SRC_PBD_MONO 0x000000A0 +#define BCI_CMD_SRC_PBD_COLOR_NEW 0x000000C0 +#define BCI_CMD_SRC_PBD_MONO_NEW 0x000000E0 +#define BCI_CMD_SRC_SBD_COLOR 0x00000100 +#define BCI_CMD_SRC_SBD_MONO 0x00000120 +#define BCI_CMD_SRC_SBD_COLOR_NEW 0x00000140 +#define BCI_CMD_SRC_SBD_MONO_NEW 0x00000160 + +#define BCI_CMD_PAT_TRANSPARENT 0x00000010 +#define BCI_CMD_PAT_NONE 0x00000000 +#define BCI_CMD_PAT_COLOR 0x00000002 +#define BCI_CMD_PAT_MONO 0x00000003 +#define BCI_CMD_PAT_PBD_COLOR 0x00000004 +#define BCI_CMD_PAT_PBD_MONO 0x00000005 +#define BCI_CMD_PAT_PBD_COLOR_NEW 0x00000006 +#define BCI_CMD_PAT_PBD_MONO_NEW 0x00000007 +#define BCI_CMD_PAT_SBD_COLOR 0x00000008 +#define BCI_CMD_PAT_SBD_MONO 0x00000009 +#define BCI_CMD_PAT_SBD_COLOR_NEW 0x0000000A +#define BCI_CMD_PAT_SBD_MONO_NEW 0x0000000B + +#define BCI_BD_BW_DISABLE 0x10000000 +#define BCI_BD_TILE_MASK 0x03000000 +#define BCI_BD_TILE_NONE 0x00000000 +#define BCI_BD_TILE_16 0x02000000 +#define BCI_BD_TILE_32 0x03000000 +#define BCI_BD_GET_BPP(bd) (((bd) >> 16) & 0xFF) +#define BCI_BD_SET_BPP(bd, bpp) ((bd) |= (((bpp) & 0xFF) << 16)) +#define BCI_BD_GET_STRIDE(bd) ((bd) & 0xFFFF) +#define BCI_BD_SET_STRIDE(bd, st) ((bd) |= ((st) & 0xFFFF)) + +#define BCI_CMD_SET_REGISTER 0x96000000 + +#define BCI_CMD_WAIT 0xC0000000 +#define BCI_CMD_WAIT_3D 0x00010000 +#define BCI_CMD_WAIT_2D 0x00020000 + +#define BCI_CMD_UPDATE_EVENT_TAG 0x98000000 + +#define BCI_CMD_DRAW_PRIM 0x80000000 +#define BCI_CMD_DRAW_INDEXED_PRIM 0x88000000 +#define BCI_CMD_DRAW_CONT 0x01000000 +#define BCI_CMD_DRAW_TRILIST 0x00000000 +#define BCI_CMD_DRAW_TRISTRIP 0x02000000 +#define BCI_CMD_DRAW_TRIFAN 0x04000000 +#define BCI_CMD_DRAW_SKIPFLAGS 0x000000ff +#define BCI_CMD_DRAW_NO_Z 0x00000001 +#define BCI_CMD_DRAW_NO_W 0x00000002 +#define BCI_CMD_DRAW_NO_CD 0x00000004 +#define BCI_CMD_DRAW_NO_CS 0x00000008 +#define BCI_CMD_DRAW_NO_U0 0x00000010 +#define BCI_CMD_DRAW_NO_V0 0x00000020 +#define BCI_CMD_DRAW_NO_UV0 0x00000030 +#define BCI_CMD_DRAW_NO_U1 0x00000040 +#define BCI_CMD_DRAW_NO_V1 0x00000080 +#define BCI_CMD_DRAW_NO_UV1 0x000000c0 + +#define BCI_CMD_DMA 0xa8000000 + +#define BCI_W_H(w, h) ((((h) << 16) | (w)) & 0x0FFF0FFF) +#define BCI_X_Y(x, y) ((((y) << 16) | (x)) & 0x0FFF0FFF) +#define BCI_X_W(x, y) ((((w) << 16) | (x)) & 0x0FFF0FFF) +#define BCI_CLIP_LR(l, r) ((((r) << 16) | (l)) & 0x0FFF0FFF) +#define BCI_CLIP_TL(t, l) ((((t) << 16) | (l)) & 0x0FFF0FFF) +#define BCI_CLIP_BR(b, r) ((((b) << 16) | (r)) & 0x0FFF0FFF) + +#define BCI_LINE_X_Y(x, y) (((y) << 16) | ((x) & 0xFFFF)) +#define BCI_LINE_STEPS(diag, axi) (((axi) << 16) | ((diag) & 0xFFFF)) +#define BCI_LINE_MISC(maj, ym, xp, yp, err) \ + (((maj) & 0x1FFF) | \ + ((ym) ? 1<<13 : 0) | \ + ((xp) ? 1<<14 : 0) | \ + ((yp) ? 1<<15 : 0) | \ + ((err) << 16)) + +/* + * common commands + */ +#define BCI_SET_REGISTERS( first, n ) \ + BCI_WRITE(BCI_CMD_SET_REGISTER | \ + ((uint32_t)(n) & 0xff) << 16 | \ + ((uint32_t)(first) & 0xffff)) +#define DMA_SET_REGISTERS( first, n ) \ + DMA_WRITE(BCI_CMD_SET_REGISTER | \ + ((uint32_t)(n) & 0xff) << 16 | \ + ((uint32_t)(first) & 0xffff)) + +#define BCI_DRAW_PRIMITIVE(n, type, skip) \ + BCI_WRITE(BCI_CMD_DRAW_PRIM | (type) | (skip) | \ + ((n) << 16)) +#define DMA_DRAW_PRIMITIVE(n, type, skip) \ + DMA_WRITE(BCI_CMD_DRAW_PRIM | (type) | (skip) | \ + ((n) << 16)) + +#define BCI_DRAW_INDICES_S3D(n, type, i0) \ + BCI_WRITE(BCI_CMD_DRAW_INDEXED_PRIM | (type) | \ + ((n) << 16) | (i0)) + +#define BCI_DRAW_INDICES_S4(n, type, skip) \ + BCI_WRITE(BCI_CMD_DRAW_INDEXED_PRIM | (type) | \ + (skip) | ((n) << 16)) + +#define BCI_DMA(n) \ + BCI_WRITE(BCI_CMD_DMA | (((n) >> 1) - 1)) + +/* + * access to MMIO + */ +#define SAVAGE_READ(reg) DRM_READ32( dev_priv->mmio, (reg) ) +#define SAVAGE_WRITE(reg) DRM_WRITE32( dev_priv->mmio, (reg) ) + +/* + * access to the burst command interface (BCI) + */ +#define SAVAGE_BCI_DEBUG 1 + +#define BCI_LOCALS volatile uint32_t *bci_ptr; + +#define BEGIN_BCI( n ) do { \ + dev_priv->wait_fifo(dev_priv, (n)); \ + bci_ptr = dev_priv->bci_ptr; \ +} while(0) + +#define BCI_WRITE( val ) *bci_ptr++ = (uint32_t)(val) + +#define BCI_COPY_FROM_USER(src,n) do { \ + unsigned int i; \ + for (i = 0; i < n; ++i) { \ + uint32_t val; \ + DRM_GET_USER_UNCHECKED(val, &((uint32_t*)(src))[i]); \ + BCI_WRITE(val); \ + } \ +} while(0) + +/* + * command DMA support + */ +#define SAVAGE_DMA_DEBUG 1 + +#define DMA_LOCALS uint32_t *dma_ptr; + +#define BEGIN_DMA( n ) do { \ + unsigned int cur = dev_priv->current_dma_page; \ + unsigned int rest = SAVAGE_DMA_PAGE_SIZE - \ + dev_priv->dma_pages[cur].used; \ + if ((n) > rest) { \ + dma_ptr = savage_dma_alloc(dev_priv, (n)); \ + } else { /* fast path for small allocations */ \ + dma_ptr = (uint32_t *)dev_priv->cmd_dma->handle + \ + cur * SAVAGE_DMA_PAGE_SIZE + \ + dev_priv->dma_pages[cur].used; \ + if (dev_priv->dma_pages[cur].used == 0) \ + savage_dma_wait(dev_priv, cur); \ + dev_priv->dma_pages[cur].used += (n); \ + } \ +} while(0) + +#define DMA_WRITE( val ) *dma_ptr++ = (uint32_t)(val) + +#define DMA_COPY_FROM_USER(src,n) do { \ + DRM_COPY_FROM_USER_UNCHECKED(dma_ptr, (src), (n)*4); \ + dma_ptr += n; \ +} while(0) + +#if SAVAGE_DMA_DEBUG +#define DMA_COMMIT() do { \ + unsigned int cur = dev_priv->current_dma_page; \ + uint32_t *expected = (uint32_t *)dev_priv->cmd_dma->handle + \ + cur * SAVAGE_DMA_PAGE_SIZE + \ + dev_priv->dma_pages[cur].used; \ + if (dma_ptr != expected) { \ + DRM_ERROR("DMA allocation and use don't match: " \ + "%p != %p\n", expected, dma_ptr); \ + savage_dma_reset(dev_priv); \ + } \ +} while(0) +#else +#define DMA_COMMIT() do {/* nothing */} while(0) +#endif + +#define DMA_FLUSH() dev_priv->dma_flush(dev_priv) + +/* Buffer aging via event tag + */ + +#define UPDATE_EVENT_COUNTER( ) do { \ + if (dev_priv->status_ptr) { \ + uint16_t count; \ + /* coordinate with Xserver */ \ + count = dev_priv->status_ptr[1023]; \ + if (count < dev_priv->event_counter) \ + dev_priv->event_wrap++; \ + dev_priv->event_counter = count; \ + } \ +} while(0) + +#define SET_AGE( age, e, w ) do { \ + (age)->event = e; \ + (age)->wrap = w; \ +} while(0) + +#define TEST_AGE( age, e, w ) \ + ( (age)->wrap < (w) || ( (age)->wrap == (w) && (age)->event <= (e) ) ) + +#endif /* __SAVAGE_DRV_H__ */ diff --git a/drivers/char/drm/savage_state.c b/drivers/char/drm/savage_state.c new file mode 100644 index 000000000000..475695a00083 --- /dev/null +++ b/drivers/char/drm/savage_state.c @@ -0,0 +1,1146 @@ +/* savage_state.c -- State and drawing support for Savage + * + * Copyright 2004 Felix Kuehling + * All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NON-INFRINGEMENT. IN NO EVENT SHALL FELIX KUEHLING BE LIABLE FOR + * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF + * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION + * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + */ +#include "drmP.h" +#include "savage_drm.h" +#include "savage_drv.h" + +void savage_emit_clip_rect_s3d(drm_savage_private_t *dev_priv, + drm_clip_rect_t *pbox) +{ + uint32_t scstart = dev_priv->state.s3d.new_scstart; + uint32_t scend = dev_priv->state.s3d.new_scend; + scstart = (scstart & ~SAVAGE_SCISSOR_MASK_S3D) | + ((uint32_t)pbox->x1 & 0x000007ff) | + (((uint32_t)pbox->y1 << 16) & 0x07ff0000); + scend = (scend & ~SAVAGE_SCISSOR_MASK_S3D) | + (((uint32_t)pbox->x2-1) & 0x000007ff) | + ((((uint32_t)pbox->y2-1) << 16) & 0x07ff0000); + if (scstart != dev_priv->state.s3d.scstart || + scend != dev_priv->state.s3d.scend) { + DMA_LOCALS; + BEGIN_DMA(4); + DMA_WRITE(BCI_CMD_WAIT|BCI_CMD_WAIT_3D); + DMA_SET_REGISTERS(SAVAGE_SCSTART_S3D, 2); + DMA_WRITE(scstart); + DMA_WRITE(scend); + dev_priv->state.s3d.scstart = scstart; + dev_priv->state.s3d.scend = scend; + dev_priv->waiting = 1; + DMA_COMMIT(); + } +} + +void savage_emit_clip_rect_s4(drm_savage_private_t *dev_priv, + drm_clip_rect_t *pbox) +{ + uint32_t drawctrl0 = dev_priv->state.s4.new_drawctrl0; + uint32_t drawctrl1 = dev_priv->state.s4.new_drawctrl1; + drawctrl0 = (drawctrl0 & ~SAVAGE_SCISSOR_MASK_S4) | + ((uint32_t)pbox->x1 & 0x000007ff) | + (((uint32_t)pbox->y1 << 12) & 0x00fff000); + drawctrl1 = (drawctrl1 & ~SAVAGE_SCISSOR_MASK_S4) | + (((uint32_t)pbox->x2-1) & 0x000007ff) | + ((((uint32_t)pbox->y2-1) << 12) & 0x00fff000); + if (drawctrl0 != dev_priv->state.s4.drawctrl0 || + drawctrl1 != dev_priv->state.s4.drawctrl1) { + DMA_LOCALS; + BEGIN_DMA(4); + DMA_WRITE(BCI_CMD_WAIT|BCI_CMD_WAIT_3D); + DMA_SET_REGISTERS(SAVAGE_DRAWCTRL0_S4, 2); + DMA_WRITE(drawctrl0); + DMA_WRITE(drawctrl1); + dev_priv->state.s4.drawctrl0 = drawctrl0; + dev_priv->state.s4.drawctrl1 = drawctrl1; + dev_priv->waiting = 1; + DMA_COMMIT(); + } +} + +static int savage_verify_texaddr(drm_savage_private_t *dev_priv, int unit, + uint32_t addr) +{ + if ((addr & 6) != 2) { /* reserved bits */ + DRM_ERROR("bad texAddr%d %08x (reserved bits)\n", unit, addr); + return DRM_ERR(EINVAL); + } + if (!(addr & 1)) { /* local */ + addr &= ~7; + if (addr < dev_priv->texture_offset || + addr >= dev_priv->texture_offset+dev_priv->texture_size) { + DRM_ERROR("bad texAddr%d %08x (local addr out of range)\n", + unit, addr); + return DRM_ERR(EINVAL); + } + } else { /* AGP */ + if (!dev_priv->agp_textures) { + DRM_ERROR("bad texAddr%d %08x (AGP not available)\n", + unit, addr); + return DRM_ERR(EINVAL); + } + addr &= ~7; + if (addr < dev_priv->agp_textures->offset || + addr >= (dev_priv->agp_textures->offset + + dev_priv->agp_textures->size)) { + DRM_ERROR("bad texAddr%d %08x (AGP addr out of range)\n", + unit, addr); + return DRM_ERR(EINVAL); + } + } + return 0; +} + +#define SAVE_STATE(reg,where) \ + if(start <= reg && start+count > reg) \ + DRM_GET_USER_UNCHECKED(dev_priv->state.where, ®s[reg-start]) +#define SAVE_STATE_MASK(reg,where,mask) do { \ + if(start <= reg && start+count > reg) { \ + uint32_t tmp; \ + DRM_GET_USER_UNCHECKED(tmp, ®s[reg-start]); \ + dev_priv->state.where = (tmp & (mask)) | \ + (dev_priv->state.where & ~(mask)); \ + } \ +} while (0) +static int savage_verify_state_s3d(drm_savage_private_t *dev_priv, + unsigned int start, unsigned int count, + const uint32_t __user *regs) +{ + if (start < SAVAGE_TEXPALADDR_S3D || + start+count-1 > SAVAGE_DESTTEXRWWATERMARK_S3D) { + DRM_ERROR("invalid register range (0x%04x-0x%04x)\n", + start, start+count-1); + return DRM_ERR(EINVAL); + } + + SAVE_STATE_MASK(SAVAGE_SCSTART_S3D, s3d.new_scstart, + ~SAVAGE_SCISSOR_MASK_S3D); + SAVE_STATE_MASK(SAVAGE_SCEND_S3D, s3d.new_scend, + ~SAVAGE_SCISSOR_MASK_S3D); + + /* if any texture regs were changed ... */ + if (start <= SAVAGE_TEXCTRL_S3D && + start+count > SAVAGE_TEXPALADDR_S3D) { + /* ... check texture state */ + SAVE_STATE(SAVAGE_TEXCTRL_S3D, s3d.texctrl); + SAVE_STATE(SAVAGE_TEXADDR_S3D, s3d.texaddr); + if (dev_priv->state.s3d.texctrl & SAVAGE_TEXCTRL_TEXEN_MASK) + return savage_verify_texaddr( + dev_priv, 0, dev_priv->state.s3d.texaddr); + } + + return 0; +} + +static int savage_verify_state_s4(drm_savage_private_t *dev_priv, + unsigned int start, unsigned int count, + const uint32_t __user *regs) +{ + int ret = 0; + + if (start < SAVAGE_DRAWLOCALCTRL_S4 || + start+count-1 > SAVAGE_TEXBLENDCOLOR_S4) { + DRM_ERROR("invalid register range (0x%04x-0x%04x)\n", + start, start+count-1); + return DRM_ERR(EINVAL); + } + + SAVE_STATE_MASK(SAVAGE_DRAWCTRL0_S4, s4.new_drawctrl0, + ~SAVAGE_SCISSOR_MASK_S4); + SAVE_STATE_MASK(SAVAGE_DRAWCTRL1_S4, s4.new_drawctrl1, + ~SAVAGE_SCISSOR_MASK_S4); + + /* if any texture regs were changed ... */ + if (start <= SAVAGE_TEXDESCR_S4 && + start+count > SAVAGE_TEXPALADDR_S4) { + /* ... check texture state */ + SAVE_STATE(SAVAGE_TEXDESCR_S4, s4.texdescr); + SAVE_STATE(SAVAGE_TEXADDR0_S4, s4.texaddr0); + SAVE_STATE(SAVAGE_TEXADDR1_S4, s4.texaddr1); + if (dev_priv->state.s4.texdescr & SAVAGE_TEXDESCR_TEX0EN_MASK) + ret |= savage_verify_texaddr( + dev_priv, 0, dev_priv->state.s4.texaddr0); + if (dev_priv->state.s4.texdescr & SAVAGE_TEXDESCR_TEX1EN_MASK) + ret |= savage_verify_texaddr( + dev_priv, 1, dev_priv->state.s4.texaddr1); + } + + return ret; +} +#undef SAVE_STATE +#undef SAVE_STATE_MASK + +static int savage_dispatch_state(drm_savage_private_t *dev_priv, + const drm_savage_cmd_header_t *cmd_header, + const uint32_t __user *regs) +{ + unsigned int count = cmd_header->state.count; + unsigned int start = cmd_header->state.start; + unsigned int count2 = 0; + unsigned int bci_size; + int ret; + DMA_LOCALS; + + if (!count) + return 0; + + if (DRM_VERIFYAREA_READ(regs, count*4)) + return DRM_ERR(EFAULT); + + if (S3_SAVAGE3D_SERIES(dev_priv->chipset)) { + ret = savage_verify_state_s3d(dev_priv, start, count, regs); + if (ret != 0) + return ret; + /* scissor regs are emitted in savage_dispatch_draw */ + if (start < SAVAGE_SCSTART_S3D) { + if (start+count > SAVAGE_SCEND_S3D+1) + count2 = count - (SAVAGE_SCEND_S3D+1 - start); + if (start+count > SAVAGE_SCSTART_S3D) + count = SAVAGE_SCSTART_S3D - start; + } else if (start <= SAVAGE_SCEND_S3D) { + if (start+count > SAVAGE_SCEND_S3D+1) { + count -= SAVAGE_SCEND_S3D+1 - start; + start = SAVAGE_SCEND_S3D+1; + } else + return 0; + } + } else { + ret = savage_verify_state_s4(dev_priv, start, count, regs); + if (ret != 0) + return ret; + /* scissor regs are emitted in savage_dispatch_draw */ + if (start < SAVAGE_DRAWCTRL0_S4) { + if (start+count > SAVAGE_DRAWCTRL1_S4+1) + count2 = count - (SAVAGE_DRAWCTRL1_S4+1 - start); + if (start+count > SAVAGE_DRAWCTRL0_S4) + count = SAVAGE_DRAWCTRL0_S4 - start; + } else if (start <= SAVAGE_DRAWCTRL1_S4) { + if (start+count > SAVAGE_DRAWCTRL1_S4+1) { + count -= SAVAGE_DRAWCTRL1_S4+1 - start; + start = SAVAGE_DRAWCTRL1_S4+1; + } else + return 0; + } + } + + bci_size = count + (count+254)/255 + count2 + (count2+254)/255; + + if (cmd_header->state.global) { + BEGIN_DMA(bci_size+1); + DMA_WRITE(BCI_CMD_WAIT | BCI_CMD_WAIT_3D); + dev_priv->waiting = 1; + } else { + BEGIN_DMA(bci_size); + } + + do { + while (count > 0) { + unsigned int n = count < 255 ? count : 255; + DMA_SET_REGISTERS(start, n); + DMA_COPY_FROM_USER(regs, n); + count -= n; + start += n; + regs += n; + } + start += 2; + regs += 2; + count = count2; + count2 = 0; + } while (count); + + DMA_COMMIT(); + + return 0; +} + +static int savage_dispatch_dma_prim(drm_savage_private_t *dev_priv, + const drm_savage_cmd_header_t *cmd_header, + const drm_buf_t *dmabuf) +{ + unsigned char reorder = 0; + unsigned int prim = cmd_header->prim.prim; + unsigned int skip = cmd_header->prim.skip; + unsigned int n = cmd_header->prim.count; + unsigned int start = cmd_header->prim.start; + unsigned int i; + BCI_LOCALS; + + if (!dmabuf) { + DRM_ERROR("called without dma buffers!\n"); + return DRM_ERR(EINVAL); + } + + if (!n) + return 0; + + switch (prim) { + case SAVAGE_PRIM_TRILIST_201: + reorder = 1; + prim = SAVAGE_PRIM_TRILIST; + case SAVAGE_PRIM_TRILIST: + if (n % 3 != 0) { + DRM_ERROR("wrong number of vertices %u in TRILIST\n", + n); + return DRM_ERR(EINVAL); + } + break; + case SAVAGE_PRIM_TRISTRIP: + case SAVAGE_PRIM_TRIFAN: + if (n < 3) { + DRM_ERROR("wrong number of vertices %u in TRIFAN/STRIP\n", + n); + return DRM_ERR(EINVAL); + } + break; + default: + DRM_ERROR("invalid primitive type %u\n", prim); + return DRM_ERR(EINVAL); + } + + if (S3_SAVAGE3D_SERIES(dev_priv->chipset)) { + if (skip != 0) { + DRM_ERROR("invalid skip flags 0x%04x for DMA\n", + skip); + return DRM_ERR(EINVAL); + } + } else { + unsigned int size = 10 - (skip & 1) - (skip >> 1 & 1) - + (skip >> 2 & 1) - (skip >> 3 & 1) - (skip >> 4 & 1) - + (skip >> 5 & 1) - (skip >> 6 & 1) - (skip >> 7 & 1); + if (skip > SAVAGE_SKIP_ALL_S4 || size != 8) { + DRM_ERROR("invalid skip flags 0x%04x for DMA\n", + skip); + return DRM_ERR(EINVAL); + } + if (reorder) { + DRM_ERROR("TRILIST_201 used on Savage4 hardware\n"); + return DRM_ERR(EINVAL); + } + } + + if (start + n > dmabuf->total/32) { + DRM_ERROR("vertex indices (%u-%u) out of range (0-%u)\n", + start, start + n - 1, dmabuf->total/32); + return DRM_ERR(EINVAL); + } + + /* Vertex DMA doesn't work with command DMA at the same time, + * so we use BCI_... to submit commands here. Flush buffered + * faked DMA first. */ + DMA_FLUSH(); + + if (dmabuf->bus_address != dev_priv->state.common.vbaddr) { + BEGIN_BCI(2); + BCI_SET_REGISTERS(SAVAGE_VERTBUFADDR, 1); + BCI_WRITE(dmabuf->bus_address | dev_priv->dma_type); + dev_priv->state.common.vbaddr = dmabuf->bus_address; + } + if (S3_SAVAGE3D_SERIES(dev_priv->chipset) && dev_priv->waiting) { + /* Workaround for what looks like a hardware bug. If a + * WAIT_3D_IDLE was emitted some time before the + * indexed drawing command then the engine will lock + * up. There are two known workarounds: + * WAIT_IDLE_EMPTY or emit at least 63 NOPs. */ + BEGIN_BCI(63); + for (i = 0; i < 63; ++i) + BCI_WRITE(BCI_CMD_WAIT); + dev_priv->waiting = 0; + } + + prim <<= 25; + while (n != 0) { + /* Can emit up to 255 indices (85 triangles) at once. */ + unsigned int count = n > 255 ? 255 : n; + if (reorder) { + /* Need to reorder indices for correct flat + * shading while preserving the clock sense + * for correct culling. Only on Savage3D. */ + int reorder[3] = {-1, -1, -1}; + reorder[start%3] = 2; + + BEGIN_BCI((count+1+1)/2); + BCI_DRAW_INDICES_S3D(count, prim, start+2); + + for (i = start+1; i+1 < start+count; i += 2) + BCI_WRITE((i + reorder[i % 3]) | + ((i+1 + reorder[(i+1) % 3]) << 16)); + if (i < start+count) + BCI_WRITE(i + reorder[i%3]); + } else if (S3_SAVAGE3D_SERIES(dev_priv->chipset)) { + BEGIN_BCI((count+1+1)/2); + BCI_DRAW_INDICES_S3D(count, prim, start); + + for (i = start+1; i+1 < start+count; i += 2) + BCI_WRITE(i | ((i+1) << 16)); + if (i < start+count) + BCI_WRITE(i); + } else { + BEGIN_BCI((count+2+1)/2); + BCI_DRAW_INDICES_S4(count, prim, skip); + + for (i = start; i+1 < start+count; i += 2) + BCI_WRITE(i | ((i+1) << 16)); + if (i < start+count) + BCI_WRITE(i); + } + + start += count; + n -= count; + + prim |= BCI_CMD_DRAW_CONT; + } + + return 0; +} + +static int savage_dispatch_vb_prim(drm_savage_private_t *dev_priv, + const drm_savage_cmd_header_t *cmd_header, + const uint32_t __user *vtxbuf, + unsigned int vb_size, + unsigned int vb_stride) +{ + unsigned char reorder = 0; + unsigned int prim = cmd_header->prim.prim; + unsigned int skip = cmd_header->prim.skip; + unsigned int n = cmd_header->prim.count; + unsigned int start = cmd_header->prim.start; + unsigned int vtx_size; + unsigned int i; + DMA_LOCALS; + + if (!n) + return 0; + + switch (prim) { + case SAVAGE_PRIM_TRILIST_201: + reorder = 1; + prim = SAVAGE_PRIM_TRILIST; + case SAVAGE_PRIM_TRILIST: + if (n % 3 != 0) { + DRM_ERROR("wrong number of vertices %u in TRILIST\n", + n); + return DRM_ERR(EINVAL); + } + break; + case SAVAGE_PRIM_TRISTRIP: + case SAVAGE_PRIM_TRIFAN: + if (n < 3) { + DRM_ERROR("wrong number of vertices %u in TRIFAN/STRIP\n", + n); + return DRM_ERR(EINVAL); + } + break; + default: + DRM_ERROR("invalid primitive type %u\n", prim); + return DRM_ERR(EINVAL); + } + + if (S3_SAVAGE3D_SERIES(dev_priv->chipset)) { + if (skip > SAVAGE_SKIP_ALL_S3D) { + DRM_ERROR("invalid skip flags 0x%04x\n", skip); + return DRM_ERR(EINVAL); + } + vtx_size = 8; /* full vertex */ + } else { + if (skip > SAVAGE_SKIP_ALL_S4) { + DRM_ERROR("invalid skip flags 0x%04x\n", skip); + return DRM_ERR(EINVAL); + } + vtx_size = 10; /* full vertex */ + } + + vtx_size -= (skip & 1) + (skip >> 1 & 1) + + (skip >> 2 & 1) + (skip >> 3 & 1) + (skip >> 4 & 1) + + (skip >> 5 & 1) + (skip >> 6 & 1) + (skip >> 7 & 1); + + if (vtx_size > vb_stride) { + DRM_ERROR("vertex size greater than vb stride (%u > %u)\n", + vtx_size, vb_stride); + return DRM_ERR(EINVAL); + } + + if (start + n > vb_size / (vb_stride*4)) { + DRM_ERROR("vertex indices (%u-%u) out of range (0-%u)\n", + start, start + n - 1, vb_size / (vb_stride*4)); + return DRM_ERR(EINVAL); + } + + prim <<= 25; + while (n != 0) { + /* Can emit up to 255 vertices (85 triangles) at once. */ + unsigned int count = n > 255 ? 255 : n; + if (reorder) { + /* Need to reorder vertices for correct flat + * shading while preserving the clock sense + * for correct culling. Only on Savage3D. */ + int reorder[3] = {-1, -1, -1}; + reorder[start%3] = 2; + + BEGIN_DMA(count*vtx_size+1); + DMA_DRAW_PRIMITIVE(count, prim, skip); + + for (i = start; i < start+count; ++i) { + unsigned int j = i + reorder[i % 3]; + DMA_COPY_FROM_USER(&vtxbuf[vb_stride*j], + vtx_size); + } + + DMA_COMMIT(); + } else { + BEGIN_DMA(count*vtx_size+1); + DMA_DRAW_PRIMITIVE(count, prim, skip); + + if (vb_stride == vtx_size) { + DMA_COPY_FROM_USER(&vtxbuf[vb_stride*start], + vtx_size*count); + } else { + for (i = start; i < start+count; ++i) { + DMA_COPY_FROM_USER( + &vtxbuf[vb_stride*i], + vtx_size); + } + } + + DMA_COMMIT(); + } + + start += count; + n -= count; + + prim |= BCI_CMD_DRAW_CONT; + } + + return 0; +} + +static int savage_dispatch_dma_idx(drm_savage_private_t *dev_priv, + const drm_savage_cmd_header_t *cmd_header, + const uint16_t __user *usr_idx, + const drm_buf_t *dmabuf) +{ + unsigned char reorder = 0; + unsigned int prim = cmd_header->idx.prim; + unsigned int skip = cmd_header->idx.skip; + unsigned int n = cmd_header->idx.count; + unsigned int i; + BCI_LOCALS; + + if (!dmabuf) { + DRM_ERROR("called without dma buffers!\n"); + return DRM_ERR(EINVAL); + } + + if (!n) + return 0; + + switch (prim) { + case SAVAGE_PRIM_TRILIST_201: + reorder = 1; + prim = SAVAGE_PRIM_TRILIST; + case SAVAGE_PRIM_TRILIST: + if (n % 3 != 0) { + DRM_ERROR("wrong number of indices %u in TRILIST\n", + n); + return DRM_ERR(EINVAL); + } + break; + case SAVAGE_PRIM_TRISTRIP: + case SAVAGE_PRIM_TRIFAN: + if (n < 3) { + DRM_ERROR("wrong number of indices %u in TRIFAN/STRIP\n", + n); + return DRM_ERR(EINVAL); + } + break; + default: + DRM_ERROR("invalid primitive type %u\n", prim); + return DRM_ERR(EINVAL); + } + + if (S3_SAVAGE3D_SERIES(dev_priv->chipset)) { + if (skip != 0) { + DRM_ERROR("invalid skip flags 0x%04x for DMA\n", + skip); + return DRM_ERR(EINVAL); + } + } else { + unsigned int size = 10 - (skip & 1) - (skip >> 1 & 1) - + (skip >> 2 & 1) - (skip >> 3 & 1) - (skip >> 4 & 1) - + (skip >> 5 & 1) - (skip >> 6 & 1) - (skip >> 7 & 1); + if (skip > SAVAGE_SKIP_ALL_S4 || size != 8) { + DRM_ERROR("invalid skip flags 0x%04x for DMA\n", + skip); + return DRM_ERR(EINVAL); + } + if (reorder) { + DRM_ERROR("TRILIST_201 used on Savage4 hardware\n"); + return DRM_ERR(EINVAL); + } + } + + /* Vertex DMA doesn't work with command DMA at the same time, + * so we use BCI_... to submit commands here. Flush buffered + * faked DMA first. */ + DMA_FLUSH(); + + if (dmabuf->bus_address != dev_priv->state.common.vbaddr) { + BEGIN_BCI(2); + BCI_SET_REGISTERS(SAVAGE_VERTBUFADDR, 1); + BCI_WRITE(dmabuf->bus_address | dev_priv->dma_type); + dev_priv->state.common.vbaddr = dmabuf->bus_address; + } + if (S3_SAVAGE3D_SERIES(dev_priv->chipset) && dev_priv->waiting) { + /* Workaround for what looks like a hardware bug. If a + * WAIT_3D_IDLE was emitted some time before the + * indexed drawing command then the engine will lock + * up. There are two known workarounds: + * WAIT_IDLE_EMPTY or emit at least 63 NOPs. */ + BEGIN_BCI(63); + for (i = 0; i < 63; ++i) + BCI_WRITE(BCI_CMD_WAIT); + dev_priv->waiting = 0; + } + + prim <<= 25; + while (n != 0) { + /* Can emit up to 255 indices (85 triangles) at once. */ + unsigned int count = n > 255 ? 255 : n; + /* Is it ok to allocate 510 bytes on the stack in an ioctl? */ + uint16_t idx[255]; + + /* Copy and check indices */ + DRM_COPY_FROM_USER_UNCHECKED(idx, usr_idx, count*2); + for (i = 0; i < count; ++i) { + if (idx[i] > dmabuf->total/32) { + DRM_ERROR("idx[%u]=%u out of range (0-%u)\n", + i, idx[i], dmabuf->total/32); + return DRM_ERR(EINVAL); + } + } + + if (reorder) { + /* Need to reorder indices for correct flat + * shading while preserving the clock sense + * for correct culling. Only on Savage3D. */ + int reorder[3] = {2, -1, -1}; + + BEGIN_BCI((count+1+1)/2); + BCI_DRAW_INDICES_S3D(count, prim, idx[2]); + + for (i = 1; i+1 < count; i += 2) + BCI_WRITE(idx[i + reorder[i % 3]] | + (idx[i+1 + reorder[(i+1) % 3]] << 16)); + if (i < count) + BCI_WRITE(idx[i + reorder[i%3]]); + } else if (S3_SAVAGE3D_SERIES(dev_priv->chipset)) { + BEGIN_BCI((count+1+1)/2); + BCI_DRAW_INDICES_S3D(count, prim, idx[0]); + + for (i = 1; i+1 < count; i += 2) + BCI_WRITE(idx[i] | (idx[i+1] << 16)); + if (i < count) + BCI_WRITE(idx[i]); + } else { + BEGIN_BCI((count+2+1)/2); + BCI_DRAW_INDICES_S4(count, prim, skip); + + for (i = 0; i+1 < count; i += 2) + BCI_WRITE(idx[i] | (idx[i+1] << 16)); + if (i < count) + BCI_WRITE(idx[i]); + } + + usr_idx += count; + n -= count; + + prim |= BCI_CMD_DRAW_CONT; + } + + return 0; +} + +static int savage_dispatch_vb_idx(drm_savage_private_t *dev_priv, + const drm_savage_cmd_header_t *cmd_header, + const uint16_t __user *usr_idx, + const uint32_t __user *vtxbuf, + unsigned int vb_size, + unsigned int vb_stride) +{ + unsigned char reorder = 0; + unsigned int prim = cmd_header->idx.prim; + unsigned int skip = cmd_header->idx.skip; + unsigned int n = cmd_header->idx.count; + unsigned int vtx_size; + unsigned int i; + DMA_LOCALS; + + if (!n) + return 0; + + switch (prim) { + case SAVAGE_PRIM_TRILIST_201: + reorder = 1; + prim = SAVAGE_PRIM_TRILIST; + case SAVAGE_PRIM_TRILIST: + if (n % 3 != 0) { + DRM_ERROR("wrong number of indices %u in TRILIST\n", + n); + return DRM_ERR(EINVAL); + } + break; + case SAVAGE_PRIM_TRISTRIP: + case SAVAGE_PRIM_TRIFAN: + if (n < 3) { + DRM_ERROR("wrong number of indices %u in TRIFAN/STRIP\n", + n); + return DRM_ERR(EINVAL); + } + break; + default: + DRM_ERROR("invalid primitive type %u\n", prim); + return DRM_ERR(EINVAL); + } + + if (S3_SAVAGE3D_SERIES(dev_priv->chipset)) { + if (skip > SAVAGE_SKIP_ALL_S3D) { + DRM_ERROR("invalid skip flags 0x%04x\n", skip); + return DRM_ERR(EINVAL); + } + vtx_size = 8; /* full vertex */ + } else { + if (skip > SAVAGE_SKIP_ALL_S4) { + DRM_ERROR("invalid skip flags 0x%04x\n", skip); + return DRM_ERR(EINVAL); + } + vtx_size = 10; /* full vertex */ + } + + vtx_size -= (skip & 1) + (skip >> 1 & 1) + + (skip >> 2 & 1) + (skip >> 3 & 1) + (skip >> 4 & 1) + + (skip >> 5 & 1) + (skip >> 6 & 1) + (skip >> 7 & 1); + + if (vtx_size > vb_stride) { + DRM_ERROR("vertex size greater than vb stride (%u > %u)\n", + vtx_size, vb_stride); + return DRM_ERR(EINVAL); + } + + prim <<= 25; + while (n != 0) { + /* Can emit up to 255 vertices (85 triangles) at once. */ + unsigned int count = n > 255 ? 255 : n; + /* Is it ok to allocate 510 bytes on the stack in an ioctl? */ + uint16_t idx[255]; + + /* Copy and check indices */ + DRM_COPY_FROM_USER_UNCHECKED(idx, usr_idx, count*2); + for (i = 0; i < count; ++i) { + if (idx[i] > vb_size / (vb_stride*4)) { + DRM_ERROR("idx[%u]=%u out of range (0-%u)\n", + i, idx[i], vb_size / (vb_stride*4)); + return DRM_ERR(EINVAL); + } + } + + if (reorder) { + /* Need to reorder vertices for correct flat + * shading while preserving the clock sense + * for correct culling. Only on Savage3D. */ + int reorder[3] = {2, -1, -1}; + + BEGIN_DMA(count*vtx_size+1); + DMA_DRAW_PRIMITIVE(count, prim, skip); + + for (i = 0; i < count; ++i) { + unsigned int j = idx[i + reorder[i % 3]]; + DMA_COPY_FROM_USER(&vtxbuf[vb_stride*j], + vtx_size); + } + + DMA_COMMIT(); + } else { + BEGIN_DMA(count*vtx_size+1); + DMA_DRAW_PRIMITIVE(count, prim, skip); + + for (i = 0; i < count; ++i) { + unsigned int j = idx[i]; + DMA_COPY_FROM_USER(&vtxbuf[vb_stride*j], + vtx_size); + } + + DMA_COMMIT(); + } + + usr_idx += count; + n -= count; + + prim |= BCI_CMD_DRAW_CONT; + } + + return 0; +} + +static int savage_dispatch_clear(drm_savage_private_t *dev_priv, + const drm_savage_cmd_header_t *cmd_header, + const drm_savage_cmd_header_t __user *data, + unsigned int nbox, + const drm_clip_rect_t __user *usr_boxes) +{ + unsigned int flags = cmd_header->clear0.flags, mask, value; + unsigned int clear_cmd; + unsigned int i, nbufs; + DMA_LOCALS; + + if (nbox == 0) + return 0; + + DRM_GET_USER_UNCHECKED(mask, &((const drm_savage_cmd_header_t*)data) + ->clear1.mask); + DRM_GET_USER_UNCHECKED(value, &((const drm_savage_cmd_header_t*)data) + ->clear1.value); + + clear_cmd = BCI_CMD_RECT | BCI_CMD_RECT_XP | BCI_CMD_RECT_YP | + BCI_CMD_SEND_COLOR | BCI_CMD_DEST_PBD_NEW; + BCI_CMD_SET_ROP(clear_cmd,0xCC); + + nbufs = ((flags & SAVAGE_FRONT) ? 1 : 0) + + ((flags & SAVAGE_BACK) ? 1 : 0) + + ((flags & SAVAGE_DEPTH) ? 1 : 0); + if (nbufs == 0) + return 0; + + if (mask != 0xffffffff) { + /* set mask */ + BEGIN_DMA(2); + DMA_SET_REGISTERS(SAVAGE_BITPLANEWTMASK, 1); + DMA_WRITE(mask); + DMA_COMMIT(); + } + for (i = 0; i < nbox; ++i) { + drm_clip_rect_t box; + unsigned int x, y, w, h; + unsigned int buf; + DRM_COPY_FROM_USER_UNCHECKED(&box, &usr_boxes[i], sizeof(box)); + x = box.x1, y = box.y1; + w = box.x2 - box.x1; + h = box.y2 - box.y1; + BEGIN_DMA(nbufs*6); + for (buf = SAVAGE_FRONT; buf <= SAVAGE_DEPTH; buf <<= 1) { + if (!(flags & buf)) + continue; + DMA_WRITE(clear_cmd); + switch(buf) { + case SAVAGE_FRONT: + DMA_WRITE(dev_priv->front_offset); + DMA_WRITE(dev_priv->front_bd); + break; + case SAVAGE_BACK: + DMA_WRITE(dev_priv->back_offset); + DMA_WRITE(dev_priv->back_bd); + break; + case SAVAGE_DEPTH: + DMA_WRITE(dev_priv->depth_offset); + DMA_WRITE(dev_priv->depth_bd); + break; + } + DMA_WRITE(value); + DMA_WRITE(BCI_X_Y(x, y)); + DMA_WRITE(BCI_W_H(w, h)); + } + DMA_COMMIT(); + } + if (mask != 0xffffffff) { + /* reset mask */ + BEGIN_DMA(2); + DMA_SET_REGISTERS(SAVAGE_BITPLANEWTMASK, 1); + DMA_WRITE(0xffffffff); + DMA_COMMIT(); + } + + return 0; +} + +static int savage_dispatch_swap(drm_savage_private_t *dev_priv, + unsigned int nbox, + const drm_clip_rect_t __user *usr_boxes) +{ + unsigned int swap_cmd; + unsigned int i; + DMA_LOCALS; + + if (nbox == 0) + return 0; + + swap_cmd = BCI_CMD_RECT | BCI_CMD_RECT_XP | BCI_CMD_RECT_YP | + BCI_CMD_SRC_PBD_COLOR_NEW | BCI_CMD_DEST_GBD; + BCI_CMD_SET_ROP(swap_cmd,0xCC); + + for (i = 0; i < nbox; ++i) { + drm_clip_rect_t box; + DRM_COPY_FROM_USER_UNCHECKED(&box, &usr_boxes[i], sizeof(box)); + + BEGIN_DMA(6); + DMA_WRITE(swap_cmd); + DMA_WRITE(dev_priv->back_offset); + DMA_WRITE(dev_priv->back_bd); + DMA_WRITE(BCI_X_Y(box.x1, box.y1)); + DMA_WRITE(BCI_X_Y(box.x1, box.y1)); + DMA_WRITE(BCI_W_H(box.x2-box.x1, box.y2-box.y1)); + DMA_COMMIT(); + } + + return 0; +} + +static int savage_dispatch_draw(drm_savage_private_t *dev_priv, + const drm_savage_cmd_header_t __user *start, + const drm_savage_cmd_header_t __user *end, + const drm_buf_t *dmabuf, + const unsigned int __user *usr_vtxbuf, + unsigned int vb_size, unsigned int vb_stride, + unsigned int nbox, + const drm_clip_rect_t __user *usr_boxes) +{ + unsigned int i, j; + int ret; + + for (i = 0; i < nbox; ++i) { + drm_clip_rect_t box; + const drm_savage_cmd_header_t __user *usr_cmdbuf; + DRM_COPY_FROM_USER_UNCHECKED(&box, &usr_boxes[i], sizeof(box)); + dev_priv->emit_clip_rect(dev_priv, &box); + + usr_cmdbuf = start; + while (usr_cmdbuf < end) { + drm_savage_cmd_header_t cmd_header; + DRM_COPY_FROM_USER_UNCHECKED(&cmd_header, usr_cmdbuf, + sizeof(cmd_header)); + usr_cmdbuf++; + switch (cmd_header.cmd.cmd) { + case SAVAGE_CMD_DMA_PRIM: + ret = savage_dispatch_dma_prim( + dev_priv, &cmd_header, dmabuf); + break; + case SAVAGE_CMD_VB_PRIM: + ret = savage_dispatch_vb_prim( + dev_priv, &cmd_header, + (const uint32_t __user *)usr_vtxbuf, + vb_size, vb_stride); + break; + case SAVAGE_CMD_DMA_IDX: + j = (cmd_header.idx.count + 3) / 4; + /* j was check in savage_bci_cmdbuf */ + ret = savage_dispatch_dma_idx( + dev_priv, &cmd_header, + (const uint16_t __user *)usr_cmdbuf, + dmabuf); + usr_cmdbuf += j; + break; + case SAVAGE_CMD_VB_IDX: + j = (cmd_header.idx.count + 3) / 4; + /* j was check in savage_bci_cmdbuf */ + ret = savage_dispatch_vb_idx( + dev_priv, &cmd_header, + (const uint16_t __user *)usr_cmdbuf, + (const uint32_t __user *)usr_vtxbuf, + vb_size, vb_stride); + usr_cmdbuf += j; + break; + default: + /* What's the best return code? EFAULT? */ + DRM_ERROR("IMPLEMENTATION ERROR: " + "non-drawing-command %d\n", + cmd_header.cmd.cmd); + return DRM_ERR(EINVAL); + } + + if (ret != 0) + return ret; + } + } + + return 0; +} + +int savage_bci_cmdbuf(DRM_IOCTL_ARGS) +{ + DRM_DEVICE; + drm_savage_private_t *dev_priv = dev->dev_private; + drm_device_dma_t *dma = dev->dma; + drm_buf_t *dmabuf; + drm_savage_cmdbuf_t cmdbuf; + drm_savage_cmd_header_t __user *usr_cmdbuf; + drm_savage_cmd_header_t __user *first_draw_cmd; + unsigned int __user *usr_vtxbuf; + drm_clip_rect_t __user *usr_boxes; + unsigned int i, j; + int ret = 0; + + DRM_DEBUG("\n"); + + LOCK_TEST_WITH_RETURN(dev, filp); + + DRM_COPY_FROM_USER_IOCTL(cmdbuf, (drm_savage_cmdbuf_t __user *)data, + sizeof(cmdbuf)); + + if (dma && dma->buflist) { + if (cmdbuf.dma_idx > dma->buf_count) { + DRM_ERROR("vertex buffer index %u out of range (0-%u)\n", + cmdbuf.dma_idx, dma->buf_count-1); + return DRM_ERR(EINVAL); + } + dmabuf = dma->buflist[cmdbuf.dma_idx]; + } else { + dmabuf = NULL; + } + + usr_cmdbuf = (drm_savage_cmd_header_t __user *)cmdbuf.cmd_addr; + usr_vtxbuf = (unsigned int __user *)cmdbuf.vb_addr; + usr_boxes = (drm_clip_rect_t __user *)cmdbuf.box_addr; + if ((cmdbuf.size && DRM_VERIFYAREA_READ(usr_cmdbuf, cmdbuf.size*8)) || + (cmdbuf.vb_size && DRM_VERIFYAREA_READ( + usr_vtxbuf, cmdbuf.vb_size)) || + (cmdbuf.nbox && DRM_VERIFYAREA_READ( + usr_boxes, cmdbuf.nbox*sizeof(drm_clip_rect_t)))) + return DRM_ERR(EFAULT); + + /* Make sure writes to DMA buffers are finished before sending + * DMA commands to the graphics hardware. */ + DRM_MEMORYBARRIER(); + + /* Coming from user space. Don't know if the Xserver has + * emitted wait commands. Assuming the worst. */ + dev_priv->waiting = 1; + + i = 0; + first_draw_cmd = NULL; + while (i < cmdbuf.size) { + drm_savage_cmd_header_t cmd_header; + DRM_COPY_FROM_USER_UNCHECKED(&cmd_header, usr_cmdbuf, + sizeof(cmd_header)); + usr_cmdbuf++; + i++; + + /* Group drawing commands with same state to minimize + * iterations over clip rects. */ + j = 0; + switch (cmd_header.cmd.cmd) { + case SAVAGE_CMD_DMA_IDX: + case SAVAGE_CMD_VB_IDX: + j = (cmd_header.idx.count + 3) / 4; + if (i + j > cmdbuf.size) { + DRM_ERROR("indexed drawing command extends " + "beyond end of command buffer\n"); + DMA_FLUSH(); + return DRM_ERR(EINVAL); + } + /* fall through */ + case SAVAGE_CMD_DMA_PRIM: + case SAVAGE_CMD_VB_PRIM: + if (!first_draw_cmd) + first_draw_cmd = usr_cmdbuf-1; + usr_cmdbuf += j; + i += j; + break; + default: + if (first_draw_cmd) { + ret = savage_dispatch_draw ( + dev_priv, first_draw_cmd, usr_cmdbuf-1, + dmabuf, usr_vtxbuf, cmdbuf.vb_size, + cmdbuf.vb_stride, + cmdbuf.nbox, usr_boxes); + if (ret != 0) + return ret; + first_draw_cmd = NULL; + } + } + if (first_draw_cmd) + continue; + + switch (cmd_header.cmd.cmd) { + case SAVAGE_CMD_STATE: + j = (cmd_header.state.count + 1) / 2; + if (i + j > cmdbuf.size) { + DRM_ERROR("command SAVAGE_CMD_STATE extends " + "beyond end of command buffer\n"); + DMA_FLUSH(); + return DRM_ERR(EINVAL); + } + ret = savage_dispatch_state( + dev_priv, &cmd_header, + (uint32_t __user *)usr_cmdbuf); + usr_cmdbuf += j; + i += j; + break; + case SAVAGE_CMD_CLEAR: + if (i + 1 > cmdbuf.size) { + DRM_ERROR("command SAVAGE_CMD_CLEAR extends " + "beyond end of command buffer\n"); + DMA_FLUSH(); + return DRM_ERR(EINVAL); + } + ret = savage_dispatch_clear(dev_priv, &cmd_header, + usr_cmdbuf, + cmdbuf.nbox, usr_boxes); + usr_cmdbuf++; + i++; + break; + case SAVAGE_CMD_SWAP: + ret = savage_dispatch_swap(dev_priv, + cmdbuf.nbox, usr_boxes); + break; + default: + DRM_ERROR("invalid command 0x%x\n", cmd_header.cmd.cmd); + DMA_FLUSH(); + return DRM_ERR(EINVAL); + } + + if (ret != 0) { + DMA_FLUSH(); + return ret; + } + } + + if (first_draw_cmd) { + ret = savage_dispatch_draw ( + dev_priv, first_draw_cmd, usr_cmdbuf, dmabuf, + usr_vtxbuf, cmdbuf.vb_size, cmdbuf.vb_stride, + cmdbuf.nbox, usr_boxes); + if (ret != 0) { + DMA_FLUSH(); + return ret; + } + } + + DMA_FLUSH(); + + if (dmabuf && cmdbuf.discard) { + drm_savage_buf_priv_t *buf_priv = dmabuf->dev_private; + uint16_t event; + event = savage_bci_emit_event(dev_priv, SAVAGE_WAIT_3D); + SET_AGE(&buf_priv->age, event, dev_priv->event_wrap); + savage_freelist_put(dev, dmabuf); + } + + return 0; +} diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 79e8aa6f2b9e..e0239a10d325 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1923,6 +1923,17 @@ config R8169_VLAN If in doubt, say Y. +config SIS190 + tristate "SiS190 gigabit ethernet support" + depends on PCI + select CRC32 + select MII + ---help--- + Say Y here if you have a SiS 190 PCI Gigabit Ethernet adapter. + + To compile this driver as a module, choose M here: the module + will be called sis190. This is recommended. + config SKGE tristate "New SysKonnect GigaEthernet support (EXPERIMENTAL)" depends on PCI && EXPERIMENTAL @@ -2093,6 +2104,25 @@ endmenu menu "Ethernet (10000 Mbit)" depends on !UML +config CHELSIO_T1 + tristate "Chelsio 10Gb Ethernet support" + depends on PCI + help + This driver supports Chelsio N110 and N210 models 10Gb Ethernet + cards. More information about adapter features and performance + tuning is in <file:Documentation/networking/cxgb.txt>. + + For general information about Chelsio and our products, visit + our website at <http://www.chelsio.com>. + + For customer support, please visit our customer support page at + <http://www.chelsio.com/support.htm>. + + Please send feedback to <linux-bugs@chelsio.com>. + + To compile this driver as a module, choose M here: the module + will be called cxgb. + config IXGB tristate "Intel(R) PRO/10GbE support" depends on PCI diff --git a/drivers/net/Makefile b/drivers/net/Makefile index a369ae284a9a..5baafcd55610 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -9,6 +9,7 @@ endif obj-$(CONFIG_E1000) += e1000/ obj-$(CONFIG_IBM_EMAC) += ibm_emac/ obj-$(CONFIG_IXGB) += ixgb/ +obj-$(CONFIG_CHELSIO_T1) += chelsio/ obj-$(CONFIG_BONDING) += bonding/ obj-$(CONFIG_GIANFAR) += gianfar_driver.o @@ -42,6 +43,7 @@ obj-$(CONFIG_EEPRO100) += eepro100.o obj-$(CONFIG_E100) += e100.o obj-$(CONFIG_TLAN) += tlan.o obj-$(CONFIG_EPIC100) += epic100.o +obj-$(CONFIG_SIS190) += sis190.o obj-$(CONFIG_SIS900) += sis900.o obj-$(CONFIG_YELLOWFIN) += yellowfin.o obj-$(CONFIG_ACENIC) += acenic.o diff --git a/drivers/net/chelsio/Makefile b/drivers/net/chelsio/Makefile new file mode 100644 index 000000000000..91e927827c43 --- /dev/null +++ b/drivers/net/chelsio/Makefile @@ -0,0 +1,11 @@ +# +# Chelsio 10Gb NIC driver for Linux. +# + +obj-$(CONFIG_CHELSIO_T1) += cxgb.o + +EXTRA_CFLAGS += -I$(TOPDIR)/drivers/net/chelsio $(DEBUG_FLAGS) + + +cxgb-objs := cxgb2.o espi.o pm3393.o sge.o subr.o mv88x201x.o + diff --git a/drivers/net/chelsio/common.h b/drivers/net/chelsio/common.h new file mode 100644 index 000000000000..f09348802b46 --- /dev/null +++ b/drivers/net/chelsio/common.h @@ -0,0 +1,314 @@ +/***************************************************************************** + * * + * File: common.h * + * $Revision: 1.21 $ * + * $Date: 2005/06/22 00:43:25 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis <dm@chelsio.com> * + * Tina Yang <tainay@chelsio.com> * + * Felix Marti <felix@chelsio.com> * + * Scott Bardone <sbardone@chelsio.com> * + * Kurt Ottaway <kottaway@chelsio.com> * + * Frank DiMambro <frank@chelsio.com> * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef _CXGB_COMMON_H_ +#define _CXGB_COMMON_H_ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/netdevice.h> +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/ethtool.h> +#include <linux/mii.h> +#include <linux/crc32.h> +#include <linux/init.h> +#include <asm/io.h> +#include <linux/pci_ids.h> + +#define DRV_DESCRIPTION "Chelsio 10Gb Ethernet Driver" +#define DRV_NAME "cxgb" +#define DRV_VERSION "2.1.1" +#define PFX DRV_NAME ": " + +#define CH_ERR(fmt, ...) printk(KERN_ERR PFX fmt, ## __VA_ARGS__) +#define CH_WARN(fmt, ...) printk(KERN_WARNING PFX fmt, ## __VA_ARGS__) +#define CH_ALERT(fmt, ...) printk(KERN_ALERT PFX fmt, ## __VA_ARGS__) + +#define CH_DEVICE(devid, ssid, idx) \ + { PCI_VENDOR_ID_CHELSIO, devid, PCI_ANY_ID, ssid, 0, 0, idx } + +#define SUPPORTED_PAUSE (1 << 13) +#define SUPPORTED_LOOPBACK (1 << 15) + +#define ADVERTISED_PAUSE (1 << 13) +#define ADVERTISED_ASYM_PAUSE (1 << 14) + +typedef struct adapter adapter_t; + +void t1_elmer0_ext_intr(adapter_t *adapter); +void t1_link_changed(adapter_t *adapter, int port_id, int link_status, + int speed, int duplex, int fc); + +struct t1_rx_mode { + struct net_device *dev; + u32 idx; + struct dev_mc_list *list; +}; + +#define t1_rx_mode_promisc(rm) (rm->dev->flags & IFF_PROMISC) +#define t1_rx_mode_allmulti(rm) (rm->dev->flags & IFF_ALLMULTI) +#define t1_rx_mode_mc_cnt(rm) (rm->dev->mc_count) + +static inline u8 *t1_get_next_mcaddr(struct t1_rx_mode *rm) +{ + u8 *addr = 0; + + if (rm->idx++ < rm->dev->mc_count) { + addr = rm->list->dmi_addr; + rm->list = rm->list->next; + } + return addr; +} + +#define MAX_NPORTS 4 + +#define SPEED_INVALID 0xffff +#define DUPLEX_INVALID 0xff + +enum { + CHBT_BOARD_N110, + CHBT_BOARD_N210 +}; + +enum { + CHBT_TERM_T1, + CHBT_TERM_T2 +}; + +enum { + CHBT_MAC_PM3393, +}; + +enum { + CHBT_PHY_88X2010, +}; + +enum { + PAUSE_RX = 1 << 0, + PAUSE_TX = 1 << 1, + PAUSE_AUTONEG = 1 << 2 +}; + +/* Revisions of T1 chip */ +enum { + TERM_T1A = 0, + TERM_T1B = 1, + TERM_T2 = 3 +}; + +struct sge_params { + unsigned int cmdQ_size[2]; + unsigned int freelQ_size[2]; + unsigned int large_buf_capacity; + unsigned int rx_coalesce_usecs; + unsigned int last_rx_coalesce_raw; + unsigned int default_rx_coalesce_usecs; + unsigned int sample_interval_usecs; + unsigned int coalesce_enable; + unsigned int polling; +}; + +struct chelsio_pci_params { + unsigned short speed; + unsigned char width; + unsigned char is_pcix; +}; + +struct adapter_params { + struct sge_params sge; + struct chelsio_pci_params pci; + + const struct board_info *brd_info; + + unsigned int nports; /* # of ethernet ports */ + unsigned int stats_update_period; + unsigned short chip_revision; + unsigned char chip_version; +}; + +struct link_config { + unsigned int supported; /* link capabilities */ + unsigned int advertising; /* advertised capabilities */ + unsigned short requested_speed; /* speed user has requested */ + unsigned short speed; /* actual link speed */ + unsigned char requested_duplex; /* duplex user has requested */ + unsigned char duplex; /* actual link duplex */ + unsigned char requested_fc; /* flow control user has requested */ + unsigned char fc; /* actual link flow control */ + unsigned char autoneg; /* autonegotiating? */ +}; + +struct cmac; +struct cphy; + +struct port_info { + struct net_device *dev; + struct cmac *mac; + struct cphy *phy; + struct link_config link_config; + struct net_device_stats netstats; +}; + +struct sge; +struct peespi; + +struct adapter { + u8 *regs; + struct pci_dev *pdev; + unsigned long registered_device_map; + unsigned long open_device_map; + unsigned long flags; + + const char *name; + int msg_enable; + u32 mmio_len; + + struct work_struct ext_intr_handler_task; + struct adapter_params params; + + struct vlan_group *vlan_grp; + + /* Terminator modules. */ + struct sge *sge; + struct peespi *espi; + + struct port_info port[MAX_NPORTS]; + struct work_struct stats_update_task; + struct timer_list stats_update_timer; + + struct semaphore mib_mutex; + spinlock_t tpi_lock; + spinlock_t work_lock; + /* guards async operations */ + spinlock_t async_lock ____cacheline_aligned; + u32 slow_intr_mask; +}; + +enum { /* adapter flags */ + FULL_INIT_DONE = 1 << 0, + TSO_CAPABLE = 1 << 2, + TCP_CSUM_CAPABLE = 1 << 3, + UDP_CSUM_CAPABLE = 1 << 4, + VLAN_ACCEL_CAPABLE = 1 << 5, + RX_CSUM_ENABLED = 1 << 6, +}; + +struct mdio_ops; +struct gmac; +struct gphy; + +struct board_info { + unsigned char board; + unsigned char port_number; + unsigned long caps; + unsigned char chip_term; + unsigned char chip_mac; + unsigned char chip_phy; + unsigned int clock_core; + unsigned int clock_mc3; + unsigned int clock_mc4; + unsigned int espi_nports; + unsigned int clock_cspi; + unsigned int clock_elmer0; + unsigned char mdio_mdien; + unsigned char mdio_mdiinv; + unsigned char mdio_mdc; + unsigned char mdio_phybaseaddr; + struct gmac *gmac; + struct gphy *gphy; + struct mdio_ops *mdio_ops; + const char *desc; +}; + +extern struct pci_device_id t1_pci_tbl[]; + +static inline int adapter_matches_type(const adapter_t *adapter, + int version, int revision) +{ + return adapter->params.chip_version == version && + adapter->params.chip_revision == revision; +} + +#define t1_is_T1B(adap) adapter_matches_type(adap, CHBT_TERM_T1, TERM_T1B) +#define is_T2(adap) adapter_matches_type(adap, CHBT_TERM_T2, TERM_T2) + +/* Returns true if an adapter supports VLAN acceleration and TSO */ +static inline int vlan_tso_capable(const adapter_t *adapter) +{ + return !t1_is_T1B(adapter); +} + +#define for_each_port(adapter, iter) \ + for (iter = 0; iter < (adapter)->params.nports; ++iter) + +#define board_info(adapter) ((adapter)->params.brd_info) +#define is_10G(adapter) (board_info(adapter)->caps & SUPPORTED_10000baseT_Full) + +static inline unsigned int core_ticks_per_usec(const adapter_t *adap) +{ + return board_info(adap)->clock_core / 1000000; +} + +extern int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value); +extern int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *value); + +extern void t1_interrupts_enable(adapter_t *adapter); +extern void t1_interrupts_disable(adapter_t *adapter); +extern void t1_interrupts_clear(adapter_t *adapter); +extern int elmer0_ext_intr_handler(adapter_t *adapter); +extern int t1_slow_intr_handler(adapter_t *adapter); + +extern int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc); +extern const struct board_info *t1_get_board_info(unsigned int board_id); +extern const struct board_info *t1_get_board_info_from_ids(unsigned int devid, + unsigned short ssid); +extern int t1_seeprom_read(adapter_t *adapter, u32 addr, u32 *data); +extern int t1_get_board_rev(adapter_t *adapter, const struct board_info *bi, + struct adapter_params *p); +extern int t1_init_hw_modules(adapter_t *adapter); +extern int t1_init_sw_modules(adapter_t *adapter, const struct board_info *bi); +extern void t1_free_sw_modules(adapter_t *adapter); +extern void t1_fatal_err(adapter_t *adapter); + +extern void t1_tp_set_udp_checksum_offload(adapter_t *adapter, int enable); +extern void t1_tp_set_tcp_checksum_offload(adapter_t *adapter, int enable); +extern void t1_tp_set_ip_checksum_offload(adapter_t *adapter, int enable); + +#endif /* _CXGB_COMMON_H_ */ diff --git a/drivers/net/chelsio/cphy.h b/drivers/net/chelsio/cphy.h new file mode 100644 index 000000000000..3412342f7345 --- /dev/null +++ b/drivers/net/chelsio/cphy.h @@ -0,0 +1,148 @@ +/***************************************************************************** + * * + * File: cphy.h * + * $Revision: 1.7 $ * + * $Date: 2005/06/21 18:29:47 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis <dm@chelsio.com> * + * Tina Yang <tainay@chelsio.com> * + * Felix Marti <felix@chelsio.com> * + * Scott Bardone <sbardone@chelsio.com> * + * Kurt Ottaway <kottaway@chelsio.com> * + * Frank DiMambro <frank@chelsio.com> * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef _CXGB_CPHY_H_ +#define _CXGB_CPHY_H_ + +#include "common.h" + +struct mdio_ops { + void (*init)(adapter_t *adapter, const struct board_info *bi); + int (*read)(adapter_t *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int *val); + int (*write)(adapter_t *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int val); +}; + +/* PHY interrupt types */ +enum { + cphy_cause_link_change = 0x1, + cphy_cause_error = 0x2 +}; + +struct cphy; + +/* PHY operations */ +struct cphy_ops { + void (*destroy)(struct cphy *); + int (*reset)(struct cphy *, int wait); + + int (*interrupt_enable)(struct cphy *); + int (*interrupt_disable)(struct cphy *); + int (*interrupt_clear)(struct cphy *); + int (*interrupt_handler)(struct cphy *); + + int (*autoneg_enable)(struct cphy *); + int (*autoneg_disable)(struct cphy *); + int (*autoneg_restart)(struct cphy *); + + int (*advertise)(struct cphy *phy, unsigned int advertise_map); + int (*set_loopback)(struct cphy *, int on); + int (*set_speed_duplex)(struct cphy *phy, int speed, int duplex); + int (*get_link_status)(struct cphy *phy, int *link_ok, int *speed, + int *duplex, int *fc); +}; + +/* A PHY instance */ +struct cphy { + int addr; /* PHY address */ + adapter_t *adapter; /* associated adapter */ + struct cphy_ops *ops; /* PHY operations */ + int (*mdio_read)(adapter_t *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int *val); + int (*mdio_write)(adapter_t *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int val); + struct cphy_instance *instance; +}; + +/* Convenience MDIO read/write wrappers */ +static inline int mdio_read(struct cphy *cphy, int mmd, int reg, + unsigned int *valp) +{ + return cphy->mdio_read(cphy->adapter, cphy->addr, mmd, reg, valp); +} + +static inline int mdio_write(struct cphy *cphy, int mmd, int reg, + unsigned int val) +{ + return cphy->mdio_write(cphy->adapter, cphy->addr, mmd, reg, val); +} + +static inline int simple_mdio_read(struct cphy *cphy, int reg, + unsigned int *valp) +{ + return mdio_read(cphy, 0, reg, valp); +} + +static inline int simple_mdio_write(struct cphy *cphy, int reg, + unsigned int val) +{ + return mdio_write(cphy, 0, reg, val); +} + +/* Convenience initializer */ +static inline void cphy_init(struct cphy *phy, adapter_t *adapter, + int phy_addr, struct cphy_ops *phy_ops, + struct mdio_ops *mdio_ops) +{ + phy->adapter = adapter; + phy->addr = phy_addr; + phy->ops = phy_ops; + if (mdio_ops) { + phy->mdio_read = mdio_ops->read; + phy->mdio_write = mdio_ops->write; + } +} + +/* Operations of the PHY-instance factory */ +struct gphy { + /* Construct a PHY instance with the given PHY address */ + struct cphy *(*create)(adapter_t *adapter, int phy_addr, + struct mdio_ops *mdio_ops); + + /* + * Reset the PHY chip. This resets the whole PHY chip, not individual + * ports. + */ + int (*reset)(adapter_t *adapter); +}; + +extern struct gphy t1_mv88x201x_ops; +extern struct gphy t1_dummy_phy_ops; + +#endif /* _CXGB_CPHY_H_ */ diff --git a/drivers/net/chelsio/cpl5_cmd.h b/drivers/net/chelsio/cpl5_cmd.h new file mode 100644 index 000000000000..27925e487bcf --- /dev/null +++ b/drivers/net/chelsio/cpl5_cmd.h @@ -0,0 +1,145 @@ +/***************************************************************************** + * * + * File: cpl5_cmd.h * + * $Revision: 1.6 $ * + * $Date: 2005/06/21 18:29:47 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis <dm@chelsio.com> * + * Tina Yang <tainay@chelsio.com> * + * Felix Marti <felix@chelsio.com> * + * Scott Bardone <sbardone@chelsio.com> * + * Kurt Ottaway <kottaway@chelsio.com> * + * Frank DiMambro <frank@chelsio.com> * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef _CXGB_CPL5_CMD_H_ +#define _CXGB_CPL5_CMD_H_ + +#include <asm/byteorder.h> + +#if !defined(__LITTLE_ENDIAN_BITFIELD) && !defined(__BIG_ENDIAN_BITFIELD) +#error "Adjust your <asm/byteorder.h> defines" +#endif + +enum CPL_opcode { + CPL_RX_PKT = 0xAD, + CPL_TX_PKT = 0xB2, + CPL_TX_PKT_LSO = 0xB6, +}; + +enum { /* TX_PKT_LSO ethernet types */ + CPL_ETH_II, + CPL_ETH_II_VLAN, + CPL_ETH_802_3, + CPL_ETH_802_3_VLAN +}; + +struct cpl_rx_data { + u32 rsvd0; + u32 len; + u32 seq; + u16 urg; + u8 rsvd1; + u8 status; +}; + +/* + * We want this header's alignment to be no more stringent than 2-byte aligned. + * All fields are u8 or u16 except for the length. However that field is not + * used so we break it into 2 16-bit parts to easily meet our alignment needs. + */ +struct cpl_tx_pkt { + u8 opcode; +#if defined(__LITTLE_ENDIAN_BITFIELD) + u8 iff:4; + u8 ip_csum_dis:1; + u8 l4_csum_dis:1; + u8 vlan_valid:1; + u8 rsvd:1; +#else + u8 rsvd:1; + u8 vlan_valid:1; + u8 l4_csum_dis:1; + u8 ip_csum_dis:1; + u8 iff:4; +#endif + u16 vlan; + u16 len_hi; + u16 len_lo; +}; + +struct cpl_tx_pkt_lso { + u8 opcode; +#if defined(__LITTLE_ENDIAN_BITFIELD) + u8 iff:4; + u8 ip_csum_dis:1; + u8 l4_csum_dis:1; + u8 vlan_valid:1; + u8 rsvd:1; +#else + u8 rsvd:1; + u8 vlan_valid:1; + u8 l4_csum_dis:1; + u8 ip_csum_dis:1; + u8 iff:4; +#endif + u16 vlan; + u32 len; + + u32 rsvd2; + u8 rsvd3; +#if defined(__LITTLE_ENDIAN_BITFIELD) + u8 tcp_hdr_words:4; + u8 ip_hdr_words:4; +#else + u8 ip_hdr_words:4; + u8 tcp_hdr_words:4; +#endif + u16 eth_type_mss; +}; + +struct cpl_rx_pkt { + u8 opcode; +#if defined(__LITTLE_ENDIAN_BITFIELD) + u8 iff:4; + u8 csum_valid:1; + u8 bad_pkt:1; + u8 vlan_valid:1; + u8 rsvd:1; +#else + u8 rsvd:1; + u8 vlan_valid:1; + u8 bad_pkt:1; + u8 csum_valid:1; + u8 iff:4; +#endif + u16 csum; + u16 vlan; + u16 len; +}; + +#endif /* _CXGB_CPL5_CMD_H_ */ diff --git a/drivers/net/chelsio/cxgb2.c b/drivers/net/chelsio/cxgb2.c new file mode 100644 index 000000000000..28ae478b386d --- /dev/null +++ b/drivers/net/chelsio/cxgb2.c @@ -0,0 +1,1256 @@ +/***************************************************************************** + * * + * File: cxgb2.c * + * $Revision: 1.25 $ * + * $Date: 2005/06/22 00:43:25 $ * + * Description: * + * Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis <dm@chelsio.com> * + * Tina Yang <tainay@chelsio.com> * + * Felix Marti <felix@chelsio.com> * + * Scott Bardone <sbardone@chelsio.com> * + * Kurt Ottaway <kottaway@chelsio.com> * + * Frank DiMambro <frank@chelsio.com> * + * * + * History: * + * * + ****************************************************************************/ + +#include "common.h" +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/if_vlan.h> +#include <linux/mii.h> +#include <linux/sockios.h> +#include <linux/proc_fs.h> +#include <linux/dma-mapping.h> +#include <asm/uaccess.h> + +#include "cpl5_cmd.h" +#include "regs.h" +#include "gmac.h" +#include "cphy.h" +#include "sge.h" +#include "espi.h" + +#ifdef work_struct +#include <linux/tqueue.h> +#define INIT_WORK INIT_TQUEUE +#define schedule_work schedule_task +#define flush_scheduled_work flush_scheduled_tasks + +static inline void schedule_mac_stats_update(struct adapter *ap, int secs) +{ + mod_timer(&ap->stats_update_timer, jiffies + secs * HZ); +} + +static inline void cancel_mac_stats_update(struct adapter *ap) +{ + del_timer_sync(&ap->stats_update_timer); + flush_scheduled_tasks(); +} + +/* + * Stats update timer for 2.4. It schedules a task to do the actual update as + * we need to access MAC statistics in process context. + */ +static void mac_stats_timer(unsigned long data) +{ + struct adapter *ap = (struct adapter *)data; + + schedule_task(&ap->stats_update_task); +} +#else +#include <linux/workqueue.h> + +static inline void schedule_mac_stats_update(struct adapter *ap, int secs) +{ + schedule_delayed_work(&ap->stats_update_task, secs * HZ); +} + +static inline void cancel_mac_stats_update(struct adapter *ap) +{ + cancel_delayed_work(&ap->stats_update_task); +} +#endif + +#define MAX_CMDQ_ENTRIES 16384 +#define MAX_CMDQ1_ENTRIES 1024 +#define MAX_RX_BUFFERS 16384 +#define MAX_RX_JUMBO_BUFFERS 16384 +#define MAX_TX_BUFFERS_HIGH 16384U +#define MAX_TX_BUFFERS_LOW 1536U +#define MIN_FL_ENTRIES 32 + +#define PORT_MASK ((1 << MAX_NPORTS) - 1) + +#define DFLT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | \ + NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP |\ + NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR) + +/* + * The EEPROM is actually bigger but only the first few bytes are used so we + * only report those. + */ +#define EEPROM_SIZE 32 + +MODULE_DESCRIPTION(DRV_DESCRIPTION); +MODULE_AUTHOR("Chelsio Communications"); +MODULE_LICENSE("GPL"); + +static int dflt_msg_enable = DFLT_MSG_ENABLE; + +MODULE_PARM(dflt_msg_enable, "i"); +MODULE_PARM_DESC(dflt_msg_enable, "Chelsio T1 message enable bitmap"); + + +static const char pci_speed[][4] = { + "33", "66", "100", "133" +}; + +/* + * Setup MAC to receive the types of packets we want. + */ +static void t1_set_rxmode(struct net_device *dev) +{ + struct adapter *adapter = dev->priv; + struct cmac *mac = adapter->port[dev->if_port].mac; + struct t1_rx_mode rm; + + rm.dev = dev; + rm.idx = 0; + rm.list = dev->mc_list; + mac->ops->set_rx_mode(mac, &rm); +} + +static void link_report(struct port_info *p) +{ + if (!netif_carrier_ok(p->dev)) + printk(KERN_INFO "%s: link down\n", p->dev->name); + else { + const char *s = "10Mbps"; + + switch (p->link_config.speed) { + case SPEED_10000: s = "10Gbps"; break; + case SPEED_1000: s = "1000Mbps"; break; + case SPEED_100: s = "100Mbps"; break; + } + + printk(KERN_INFO "%s: link up, %s, %s-duplex\n", + p->dev->name, s, + p->link_config.duplex == DUPLEX_FULL ? "full" : "half"); + } +} + +void t1_link_changed(struct adapter *adapter, int port_id, int link_stat, + int speed, int duplex, int pause) +{ + struct port_info *p = &adapter->port[port_id]; + + if (link_stat != netif_carrier_ok(p->dev)) { + if (link_stat) + netif_carrier_on(p->dev); + else + netif_carrier_off(p->dev); + link_report(p); + + } +} + +static void link_start(struct port_info *p) +{ + struct cmac *mac = p->mac; + + mac->ops->reset(mac); + if (mac->ops->macaddress_set) + mac->ops->macaddress_set(mac, p->dev->dev_addr); + t1_set_rxmode(p->dev); + t1_link_start(p->phy, mac, &p->link_config); + mac->ops->enable(mac, MAC_DIRECTION_RX | MAC_DIRECTION_TX); +} + +static void enable_hw_csum(struct adapter *adapter) +{ + if (adapter->flags & TSO_CAPABLE) + t1_tp_set_ip_checksum_offload(adapter, 1); /* for TSO only */ + t1_tp_set_tcp_checksum_offload(adapter, 1); +} + +/* + * Things to do upon first use of a card. + * This must run with the rtnl lock held. + */ +static int cxgb_up(struct adapter *adapter) +{ + int err = 0; + + if (!(adapter->flags & FULL_INIT_DONE)) { + err = t1_init_hw_modules(adapter); + if (err) + goto out_err; + + enable_hw_csum(adapter); + adapter->flags |= FULL_INIT_DONE; + } + + t1_interrupts_clear(adapter); + if ((err = request_irq(adapter->pdev->irq, + t1_select_intr_handler(adapter), SA_SHIRQ, + adapter->name, adapter))) { + goto out_err; + } + t1_sge_start(adapter->sge); + t1_interrupts_enable(adapter); + out_err: + return err; +} + +/* + * Release resources when all the ports have been stopped. + */ +static void cxgb_down(struct adapter *adapter) +{ + t1_sge_stop(adapter->sge); + t1_interrupts_disable(adapter); + free_irq(adapter->pdev->irq, adapter); +} + +static int cxgb_open(struct net_device *dev) +{ + int err; + struct adapter *adapter = dev->priv; + int other_ports = adapter->open_device_map & PORT_MASK; + + if (!adapter->open_device_map && (err = cxgb_up(adapter)) < 0) + return err; + + __set_bit(dev->if_port, &adapter->open_device_map); + link_start(&adapter->port[dev->if_port]); + netif_start_queue(dev); + if (!other_ports && adapter->params.stats_update_period) + schedule_mac_stats_update(adapter, + adapter->params.stats_update_period); + return 0; +} + +static int cxgb_close(struct net_device *dev) +{ + struct adapter *adapter = dev->priv; + struct port_info *p = &adapter->port[dev->if_port]; + struct cmac *mac = p->mac; + + netif_stop_queue(dev); + mac->ops->disable(mac, MAC_DIRECTION_TX | MAC_DIRECTION_RX); + netif_carrier_off(dev); + + clear_bit(dev->if_port, &adapter->open_device_map); + if (adapter->params.stats_update_period && + !(adapter->open_device_map & PORT_MASK)) { + /* Stop statistics accumulation. */ + smp_mb__after_clear_bit(); + spin_lock(&adapter->work_lock); /* sync with update task */ + spin_unlock(&adapter->work_lock); + cancel_mac_stats_update(adapter); + } + + if (!adapter->open_device_map) + cxgb_down(adapter); + return 0; +} + +static struct net_device_stats *t1_get_stats(struct net_device *dev) +{ + struct adapter *adapter = dev->priv; + struct port_info *p = &adapter->port[dev->if_port]; + struct net_device_stats *ns = &p->netstats; + const struct cmac_statistics *pstats; + + /* Do a full update of the MAC stats */ + pstats = p->mac->ops->statistics_update(p->mac, + MAC_STATS_UPDATE_FULL); + + ns->tx_packets = pstats->TxUnicastFramesOK + + pstats->TxMulticastFramesOK + pstats->TxBroadcastFramesOK; + + ns->rx_packets = pstats->RxUnicastFramesOK + + pstats->RxMulticastFramesOK + pstats->RxBroadcastFramesOK; + + ns->tx_bytes = pstats->TxOctetsOK; + ns->rx_bytes = pstats->RxOctetsOK; + + ns->tx_errors = pstats->TxLateCollisions + pstats->TxLengthErrors + + pstats->TxUnderrun + pstats->TxFramesAbortedDueToXSCollisions; + ns->rx_errors = pstats->RxDataErrors + pstats->RxJabberErrors + + pstats->RxFCSErrors + pstats->RxAlignErrors + + pstats->RxSequenceErrors + pstats->RxFrameTooLongErrors + + pstats->RxSymbolErrors + pstats->RxRuntErrors; + + ns->multicast = pstats->RxMulticastFramesOK; + ns->collisions = pstats->TxTotalCollisions; + + /* detailed rx_errors */ + ns->rx_length_errors = pstats->RxFrameTooLongErrors + + pstats->RxJabberErrors; + ns->rx_over_errors = 0; + ns->rx_crc_errors = pstats->RxFCSErrors; + ns->rx_frame_errors = pstats->RxAlignErrors; + ns->rx_fifo_errors = 0; + ns->rx_missed_errors = 0; + + /* detailed tx_errors */ + ns->tx_aborted_errors = pstats->TxFramesAbortedDueToXSCollisions; + ns->tx_carrier_errors = 0; + ns->tx_fifo_errors = pstats->TxUnderrun; + ns->tx_heartbeat_errors = 0; + ns->tx_window_errors = pstats->TxLateCollisions; + return ns; +} + +static u32 get_msglevel(struct net_device *dev) +{ + struct adapter *adapter = dev->priv; + + return adapter->msg_enable; +} + +static void set_msglevel(struct net_device *dev, u32 val) +{ + struct adapter *adapter = dev->priv; + + adapter->msg_enable = val; +} + +static char stats_strings[][ETH_GSTRING_LEN] = { + "TxOctetsOK", + "TxOctetsBad", + "TxUnicastFramesOK", + "TxMulticastFramesOK", + "TxBroadcastFramesOK", + "TxPauseFrames", + "TxFramesWithDeferredXmissions", + "TxLateCollisions", + "TxTotalCollisions", + "TxFramesAbortedDueToXSCollisions", + "TxUnderrun", + "TxLengthErrors", + "TxInternalMACXmitError", + "TxFramesWithExcessiveDeferral", + "TxFCSErrors", + + "RxOctetsOK", + "RxOctetsBad", + "RxUnicastFramesOK", + "RxMulticastFramesOK", + "RxBroadcastFramesOK", + "RxPauseFrames", + "RxFCSErrors", + "RxAlignErrors", + "RxSymbolErrors", + "RxDataErrors", + "RxSequenceErrors", + "RxRuntErrors", + "RxJabberErrors", + "RxInternalMACRcvError", + "RxInRangeLengthErrors", + "RxOutOfRangeLengthField", + "RxFrameTooLongErrors", + + "TSO", + "VLANextractions", + "VLANinsertions", + "RxCsumGood", + "TxCsumOffload", + "RxDrops" + + "respQ_empty", + "respQ_overflow", + "freelistQ_empty", + "pkt_too_big", + "pkt_mismatch", + "cmdQ_full0", + "cmdQ_full1", + "tx_ipfrags", + "tx_reg_pkts", + "tx_lso_pkts", + "tx_do_cksum", + + "espi_DIP2ParityErr", + "espi_DIP4Err", + "espi_RxDrops", + "espi_TxDrops", + "espi_RxOvfl", + "espi_ParityErr" +}; + +#define T2_REGMAP_SIZE (3 * 1024) + +static int get_regs_len(struct net_device *dev) +{ + return T2_REGMAP_SIZE; +} + +static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + struct adapter *adapter = dev->priv; + + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + strcpy(info->fw_version, "N/A"); + strcpy(info->bus_info, pci_name(adapter->pdev)); +} + +static int get_stats_count(struct net_device *dev) +{ + return ARRAY_SIZE(stats_strings); +} + +static void get_strings(struct net_device *dev, u32 stringset, u8 *data) +{ + if (stringset == ETH_SS_STATS) + memcpy(data, stats_strings, sizeof(stats_strings)); +} + +static void get_stats(struct net_device *dev, struct ethtool_stats *stats, + u64 *data) +{ + struct adapter *adapter = dev->priv; + struct cmac *mac = adapter->port[dev->if_port].mac; + const struct cmac_statistics *s; + const struct sge_port_stats *ss; + const struct sge_intr_counts *t; + + s = mac->ops->statistics_update(mac, MAC_STATS_UPDATE_FULL); + ss = t1_sge_get_port_stats(adapter->sge, dev->if_port); + t = t1_sge_get_intr_counts(adapter->sge); + + *data++ = s->TxOctetsOK; + *data++ = s->TxOctetsBad; + *data++ = s->TxUnicastFramesOK; + *data++ = s->TxMulticastFramesOK; + *data++ = s->TxBroadcastFramesOK; + *data++ = s->TxPauseFrames; + *data++ = s->TxFramesWithDeferredXmissions; + *data++ = s->TxLateCollisions; + *data++ = s->TxTotalCollisions; + *data++ = s->TxFramesAbortedDueToXSCollisions; + *data++ = s->TxUnderrun; + *data++ = s->TxLengthErrors; + *data++ = s->TxInternalMACXmitError; + *data++ = s->TxFramesWithExcessiveDeferral; + *data++ = s->TxFCSErrors; + + *data++ = s->RxOctetsOK; + *data++ = s->RxOctetsBad; + *data++ = s->RxUnicastFramesOK; + *data++ = s->RxMulticastFramesOK; + *data++ = s->RxBroadcastFramesOK; + *data++ = s->RxPauseFrames; + *data++ = s->RxFCSErrors; + *data++ = s->RxAlignErrors; + *data++ = s->RxSymbolErrors; + *data++ = s->RxDataErrors; + *data++ = s->RxSequenceErrors; + *data++ = s->RxRuntErrors; + *data++ = s->RxJabberErrors; + *data++ = s->RxInternalMACRcvError; + *data++ = s->RxInRangeLengthErrors; + *data++ = s->RxOutOfRangeLengthField; + *data++ = s->RxFrameTooLongErrors; + + *data++ = ss->tso; + *data++ = ss->vlan_xtract; + *data++ = ss->vlan_insert; + *data++ = ss->rx_cso_good; + *data++ = ss->tx_cso; + *data++ = ss->rx_drops; + + *data++ = (u64)t->respQ_empty; + *data++ = (u64)t->respQ_overflow; + *data++ = (u64)t->freelistQ_empty; + *data++ = (u64)t->pkt_too_big; + *data++ = (u64)t->pkt_mismatch; + *data++ = (u64)t->cmdQ_full[0]; + *data++ = (u64)t->cmdQ_full[1]; + *data++ = (u64)t->tx_ipfrags; + *data++ = (u64)t->tx_reg_pkts; + *data++ = (u64)t->tx_lso_pkts; + *data++ = (u64)t->tx_do_cksum; +} + +static inline void reg_block_dump(struct adapter *ap, void *buf, + unsigned int start, unsigned int end) +{ + u32 *p = buf + start; + + for ( ; start <= end; start += sizeof(u32)) + *p++ = readl(ap->regs + start); +} + +static void get_regs(struct net_device *dev, struct ethtool_regs *regs, + void *buf) +{ + struct adapter *ap = dev->priv; + + /* + * Version scheme: bits 0..9: chip version, bits 10..15: chip revision + */ + regs->version = 2; + + memset(buf, 0, T2_REGMAP_SIZE); + reg_block_dump(ap, buf, 0, A_SG_RESPACCUTIMER); +} + +static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct adapter *adapter = dev->priv; + struct port_info *p = &adapter->port[dev->if_port]; + + cmd->supported = p->link_config.supported; + cmd->advertising = p->link_config.advertising; + + if (netif_carrier_ok(dev)) { + cmd->speed = p->link_config.speed; + cmd->duplex = p->link_config.duplex; + } else { + cmd->speed = -1; + cmd->duplex = -1; + } + + cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE; + cmd->phy_address = p->phy->addr; + cmd->transceiver = XCVR_EXTERNAL; + cmd->autoneg = p->link_config.autoneg; + cmd->maxtxpkt = 0; + cmd->maxrxpkt = 0; + return 0; +} + +static int speed_duplex_to_caps(int speed, int duplex) +{ + int cap = 0; + + switch (speed) { + case SPEED_10: + if (duplex == DUPLEX_FULL) + cap = SUPPORTED_10baseT_Full; + else + cap = SUPPORTED_10baseT_Half; + break; + case SPEED_100: + if (duplex == DUPLEX_FULL) + cap = SUPPORTED_100baseT_Full; + else + cap = SUPPORTED_100baseT_Half; + break; + case SPEED_1000: + if (duplex == DUPLEX_FULL) + cap = SUPPORTED_1000baseT_Full; + else + cap = SUPPORTED_1000baseT_Half; + break; + case SPEED_10000: + if (duplex == DUPLEX_FULL) + cap = SUPPORTED_10000baseT_Full; + } + return cap; +} + +#define ADVERTISED_MASK (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | \ + ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full | \ + ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full | \ + ADVERTISED_10000baseT_Full) + +static int set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct adapter *adapter = dev->priv; + struct port_info *p = &adapter->port[dev->if_port]; + struct link_config *lc = &p->link_config; + + if (!(lc->supported & SUPPORTED_Autoneg)) + return -EOPNOTSUPP; /* can't change speed/duplex */ + + if (cmd->autoneg == AUTONEG_DISABLE) { + int cap = speed_duplex_to_caps(cmd->speed, cmd->duplex); + + if (!(lc->supported & cap) || cmd->speed == SPEED_1000) + return -EINVAL; + lc->requested_speed = cmd->speed; + lc->requested_duplex = cmd->duplex; + lc->advertising = 0; + } else { + cmd->advertising &= ADVERTISED_MASK; + if (cmd->advertising & (cmd->advertising - 1)) + cmd->advertising = lc->supported; + cmd->advertising &= lc->supported; + if (!cmd->advertising) + return -EINVAL; + lc->requested_speed = SPEED_INVALID; + lc->requested_duplex = DUPLEX_INVALID; + lc->advertising = cmd->advertising | ADVERTISED_Autoneg; + } + lc->autoneg = cmd->autoneg; + if (netif_running(dev)) + t1_link_start(p->phy, p->mac, lc); + return 0; +} + +static void get_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *epause) +{ + struct adapter *adapter = dev->priv; + struct port_info *p = &adapter->port[dev->if_port]; + + epause->autoneg = (p->link_config.requested_fc & PAUSE_AUTONEG) != 0; + epause->rx_pause = (p->link_config.fc & PAUSE_RX) != 0; + epause->tx_pause = (p->link_config.fc & PAUSE_TX) != 0; +} + +static int set_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *epause) +{ + struct adapter *adapter = dev->priv; + struct port_info *p = &adapter->port[dev->if_port]; + struct link_config *lc = &p->link_config; + + if (epause->autoneg == AUTONEG_DISABLE) + lc->requested_fc = 0; + else if (lc->supported & SUPPORTED_Autoneg) + lc->requested_fc = PAUSE_AUTONEG; + else + return -EINVAL; + + if (epause->rx_pause) + lc->requested_fc |= PAUSE_RX; + if (epause->tx_pause) + lc->requested_fc |= PAUSE_TX; + if (lc->autoneg == AUTONEG_ENABLE) { + if (netif_running(dev)) + t1_link_start(p->phy, p->mac, lc); + } else { + lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX); + if (netif_running(dev)) + p->mac->ops->set_speed_duplex_fc(p->mac, -1, -1, + lc->fc); + } + return 0; +} + +static u32 get_rx_csum(struct net_device *dev) +{ + struct adapter *adapter = dev->priv; + + return (adapter->flags & RX_CSUM_ENABLED) != 0; +} + +static int set_rx_csum(struct net_device *dev, u32 data) +{ + struct adapter *adapter = dev->priv; + + if (data) + adapter->flags |= RX_CSUM_ENABLED; + else + adapter->flags &= ~RX_CSUM_ENABLED; + return 0; +} + +static int set_tso(struct net_device *dev, u32 value) +{ + struct adapter *adapter = dev->priv; + + if (!(adapter->flags & TSO_CAPABLE)) + return value ? -EOPNOTSUPP : 0; + return ethtool_op_set_tso(dev, value); +} + +static void get_sge_param(struct net_device *dev, struct ethtool_ringparam *e) +{ + struct adapter *adapter = dev->priv; + int jumbo_fl = t1_is_T1B(adapter) ? 1 : 0; + + e->rx_max_pending = MAX_RX_BUFFERS; + e->rx_mini_max_pending = 0; + e->rx_jumbo_max_pending = MAX_RX_JUMBO_BUFFERS; + e->tx_max_pending = MAX_CMDQ_ENTRIES; + + e->rx_pending = adapter->params.sge.freelQ_size[!jumbo_fl]; + e->rx_mini_pending = 0; + e->rx_jumbo_pending = adapter->params.sge.freelQ_size[jumbo_fl]; + e->tx_pending = adapter->params.sge.cmdQ_size[0]; +} + +static int set_sge_param(struct net_device *dev, struct ethtool_ringparam *e) +{ + struct adapter *adapter = dev->priv; + int jumbo_fl = t1_is_T1B(adapter) ? 1 : 0; + + if (e->rx_pending > MAX_RX_BUFFERS || e->rx_mini_pending || + e->rx_jumbo_pending > MAX_RX_JUMBO_BUFFERS || + e->tx_pending > MAX_CMDQ_ENTRIES || + e->rx_pending < MIN_FL_ENTRIES || + e->rx_jumbo_pending < MIN_FL_ENTRIES || + e->tx_pending < (adapter->params.nports + 1) * (MAX_SKB_FRAGS + 1)) + return -EINVAL; + + if (adapter->flags & FULL_INIT_DONE) + return -EBUSY; + + adapter->params.sge.freelQ_size[!jumbo_fl] = e->rx_pending; + adapter->params.sge.freelQ_size[jumbo_fl] = e->rx_jumbo_pending; + adapter->params.sge.cmdQ_size[0] = e->tx_pending; + adapter->params.sge.cmdQ_size[1] = e->tx_pending > MAX_CMDQ1_ENTRIES ? + MAX_CMDQ1_ENTRIES : e->tx_pending; + return 0; +} + +static int set_coalesce(struct net_device *dev, struct ethtool_coalesce *c) +{ + struct adapter *adapter = dev->priv; + + /* + * If RX coalescing is requested we use NAPI, otherwise interrupts. + * This choice can be made only when all ports and the TOE are off. + */ + if (adapter->open_device_map == 0) + adapter->params.sge.polling = c->use_adaptive_rx_coalesce; + + if (adapter->params.sge.polling) { + adapter->params.sge.rx_coalesce_usecs = 0; + } else { + adapter->params.sge.rx_coalesce_usecs = c->rx_coalesce_usecs; + } + adapter->params.sge.coalesce_enable = c->use_adaptive_rx_coalesce; + adapter->params.sge.sample_interval_usecs = c->rate_sample_interval; + t1_sge_set_coalesce_params(adapter->sge, &adapter->params.sge); + return 0; +} + +static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c) +{ + struct adapter *adapter = dev->priv; + + c->rx_coalesce_usecs = adapter->params.sge.rx_coalesce_usecs; + c->rate_sample_interval = adapter->params.sge.sample_interval_usecs; + c->use_adaptive_rx_coalesce = adapter->params.sge.coalesce_enable; + return 0; +} + +static int get_eeprom_len(struct net_device *dev) +{ + return EEPROM_SIZE; +} + +#define EEPROM_MAGIC(ap) \ + (PCI_VENDOR_ID_CHELSIO | ((ap)->params.chip_version << 16)) + +static int get_eeprom(struct net_device *dev, struct ethtool_eeprom *e, + u8 *data) +{ + int i; + u8 buf[EEPROM_SIZE] __attribute__((aligned(4))); + struct adapter *adapter = dev->priv; + + e->magic = EEPROM_MAGIC(adapter); + for (i = e->offset & ~3; i < e->offset + e->len; i += sizeof(u32)) + t1_seeprom_read(adapter, i, (u32 *)&buf[i]); + memcpy(data, buf + e->offset, e->len); + return 0; +} + +static struct ethtool_ops t1_ethtool_ops = { + .get_settings = get_settings, + .set_settings = set_settings, + .get_drvinfo = get_drvinfo, + .get_msglevel = get_msglevel, + .set_msglevel = set_msglevel, + .get_ringparam = get_sge_param, + .set_ringparam = set_sge_param, + .get_coalesce = get_coalesce, + .set_coalesce = set_coalesce, + .get_eeprom_len = get_eeprom_len, + .get_eeprom = get_eeprom, + .get_pauseparam = get_pauseparam, + .set_pauseparam = set_pauseparam, + .get_rx_csum = get_rx_csum, + .set_rx_csum = set_rx_csum, + .get_tx_csum = ethtool_op_get_tx_csum, + .set_tx_csum = ethtool_op_set_tx_csum, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, + .get_link = ethtool_op_get_link, + .get_strings = get_strings, + .get_stats_count = get_stats_count, + .get_ethtool_stats = get_stats, + .get_regs_len = get_regs_len, + .get_regs = get_regs, + .get_tso = ethtool_op_get_tso, + .set_tso = set_tso, +}; + +static void cxgb_proc_cleanup(struct adapter *adapter, + struct proc_dir_entry *dir) +{ + const char *name; + name = adapter->name; + remove_proc_entry(name, dir); +} +//#define chtoe_setup_toedev(adapter) NULL +#define update_mtu_tab(adapter) +#define write_smt_entry(adapter, idx) + +static int t1_ioctl(struct net_device *dev, struct ifreq *req, int cmd) +{ + struct adapter *adapter = dev->priv; + struct mii_ioctl_data *data = (struct mii_ioctl_data *)&req->ifr_data; + + switch (cmd) { + case SIOCGMIIPHY: + data->phy_id = adapter->port[dev->if_port].phy->addr; + /* FALLTHRU */ + case SIOCGMIIREG: { + struct cphy *phy = adapter->port[dev->if_port].phy; + u32 val; + + if (!phy->mdio_read) + return -EOPNOTSUPP; + phy->mdio_read(adapter, data->phy_id, 0, data->reg_num & 0x1f, + &val); + data->val_out = val; + break; + } + case SIOCSMIIREG: { + struct cphy *phy = adapter->port[dev->if_port].phy; + + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + if (!phy->mdio_write) + return -EOPNOTSUPP; + phy->mdio_write(adapter, data->phy_id, 0, data->reg_num & 0x1f, + data->val_in); + break; + } + + default: + return -EOPNOTSUPP; + } + return 0; +} + +static int t1_change_mtu(struct net_device *dev, int new_mtu) +{ + int ret; + struct adapter *adapter = dev->priv; + struct cmac *mac = adapter->port[dev->if_port].mac; + + if (!mac->ops->set_mtu) + return -EOPNOTSUPP; + if (new_mtu < 68) + return -EINVAL; + if ((ret = mac->ops->set_mtu(mac, new_mtu))) + return ret; + dev->mtu = new_mtu; + return 0; +} + +static int t1_set_mac_addr(struct net_device *dev, void *p) +{ + struct adapter *adapter = dev->priv; + struct cmac *mac = adapter->port[dev->if_port].mac; + struct sockaddr *addr = p; + + if (!mac->ops->macaddress_set) + return -EOPNOTSUPP; + + memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); + mac->ops->macaddress_set(mac, dev->dev_addr); + return 0; +} + +#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) +static void vlan_rx_register(struct net_device *dev, + struct vlan_group *grp) +{ + struct adapter *adapter = dev->priv; + + spin_lock_irq(&adapter->async_lock); + adapter->vlan_grp = grp; + t1_set_vlan_accel(adapter, grp != NULL); + spin_unlock_irq(&adapter->async_lock); +} + +static void vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) +{ + struct adapter *adapter = dev->priv; + + spin_lock_irq(&adapter->async_lock); + if (adapter->vlan_grp) + adapter->vlan_grp->vlan_devices[vid] = NULL; + spin_unlock_irq(&adapter->async_lock); +} +#endif + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void t1_netpoll(struct net_device *dev) +{ + unsigned long flags; + struct adapter *adapter = dev->priv; + + local_irq_save(flags); + t1_select_intr_handler(adapter)(adapter->pdev->irq, adapter, NULL); + local_irq_restore(flags); +} +#endif + +/* + * Periodic accumulation of MAC statistics. This is used only if the MAC + * does not have any other way to prevent stats counter overflow. + */ +static void mac_stats_task(void *data) +{ + int i; + struct adapter *adapter = data; + + for_each_port(adapter, i) { + struct port_info *p = &adapter->port[i]; + + if (netif_running(p->dev)) + p->mac->ops->statistics_update(p->mac, + MAC_STATS_UPDATE_FAST); + } + + /* Schedule the next statistics update if any port is active. */ + spin_lock(&adapter->work_lock); + if (adapter->open_device_map & PORT_MASK) + schedule_mac_stats_update(adapter, + adapter->params.stats_update_period); + spin_unlock(&adapter->work_lock); +} + +/* + * Processes elmer0 external interrupts in process context. + */ +static void ext_intr_task(void *data) +{ + struct adapter *adapter = data; + + elmer0_ext_intr_handler(adapter); + + /* Now reenable external interrupts */ + spin_lock_irq(&adapter->async_lock); + adapter->slow_intr_mask |= F_PL_INTR_EXT; + writel(F_PL_INTR_EXT, adapter->regs + A_PL_CAUSE); + writel(adapter->slow_intr_mask | F_PL_INTR_SGE_DATA, + adapter->regs + A_PL_ENABLE); + spin_unlock_irq(&adapter->async_lock); +} + +/* + * Interrupt-context handler for elmer0 external interrupts. + */ +void t1_elmer0_ext_intr(struct adapter *adapter) +{ + /* + * Schedule a task to handle external interrupts as we require + * a process context. We disable EXT interrupts in the interim + * and let the task reenable them when it's done. + */ + adapter->slow_intr_mask &= ~F_PL_INTR_EXT; + writel(adapter->slow_intr_mask | F_PL_INTR_SGE_DATA, + adapter->regs + A_PL_ENABLE); + schedule_work(&adapter->ext_intr_handler_task); +} + +void t1_fatal_err(struct adapter *adapter) +{ + if (adapter->flags & FULL_INIT_DONE) { + t1_sge_stop(adapter->sge); + t1_interrupts_disable(adapter); + } + CH_ALERT("%s: encountered fatal error, operation suspended\n", + adapter->name); +} + +static int __devinit init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + static int version_printed; + + int i, err, pci_using_dac = 0; + unsigned long mmio_start, mmio_len; + const struct board_info *bi; + struct adapter *adapter = NULL; + struct port_info *pi; + + if (!version_printed) { + printk(KERN_INFO "%s - version %s\n", DRV_DESCRIPTION, + DRV_VERSION); + ++version_printed; + } + + err = pci_enable_device(pdev); + if (err) + return err; + + if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { + CH_ERR("%s: cannot find PCI device memory base address\n", + pci_name(pdev)); + err = -ENODEV; + goto out_disable_pdev; + } + + if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { + pci_using_dac = 1; + + if (pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) { + CH_ERR("%s: unable to obtain 64-bit DMA for" + "consistent allocations\n", pci_name(pdev)); + err = -ENODEV; + goto out_disable_pdev; + } + + } else if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) != 0) { + CH_ERR("%s: no usable DMA configuration\n", pci_name(pdev)); + goto out_disable_pdev; + } + + err = pci_request_regions(pdev, DRV_NAME); + if (err) { + CH_ERR("%s: cannot obtain PCI resources\n", pci_name(pdev)); + goto out_disable_pdev; + } + + pci_set_master(pdev); + + mmio_start = pci_resource_start(pdev, 0); + mmio_len = pci_resource_len(pdev, 0); + bi = t1_get_board_info(ent->driver_data); + + for (i = 0; i < bi->port_number; ++i) { + struct net_device *netdev; + + netdev = alloc_etherdev(adapter ? 0 : sizeof(*adapter)); + if (!netdev) { + err = -ENOMEM; + goto out_free_dev; + } + + SET_MODULE_OWNER(netdev); + SET_NETDEV_DEV(netdev, &pdev->dev); + + if (!adapter) { + adapter = netdev->priv; + adapter->pdev = pdev; + adapter->port[0].dev = netdev; /* so we don't leak it */ + + adapter->regs = ioremap(mmio_start, mmio_len); + if (!adapter->regs) { + CH_ERR("%s: cannot map device registers\n", + pci_name(pdev)); + err = -ENOMEM; + goto out_free_dev; + } + + if (t1_get_board_rev(adapter, bi, &adapter->params)) { + err = -ENODEV; /* Can't handle this chip rev */ + goto out_free_dev; + } + + adapter->name = pci_name(pdev); + adapter->msg_enable = dflt_msg_enable; + adapter->mmio_len = mmio_len; + + init_MUTEX(&adapter->mib_mutex); + spin_lock_init(&adapter->tpi_lock); + spin_lock_init(&adapter->work_lock); + spin_lock_init(&adapter->async_lock); + + INIT_WORK(&adapter->ext_intr_handler_task, + ext_intr_task, adapter); + INIT_WORK(&adapter->stats_update_task, mac_stats_task, + adapter); +#ifdef work_struct + init_timer(&adapter->stats_update_timer); + adapter->stats_update_timer.function = mac_stats_timer; + adapter->stats_update_timer.data = + (unsigned long)adapter; +#endif + + pci_set_drvdata(pdev, netdev); + } + + pi = &adapter->port[i]; + pi->dev = netdev; + netif_carrier_off(netdev); + netdev->irq = pdev->irq; + netdev->if_port = i; + netdev->mem_start = mmio_start; + netdev->mem_end = mmio_start + mmio_len - 1; + netdev->priv = adapter; + netdev->features |= NETIF_F_SG | NETIF_F_IP_CSUM; + netdev->features |= NETIF_F_LLTX; + + adapter->flags |= RX_CSUM_ENABLED | TCP_CSUM_CAPABLE; + if (pci_using_dac) + netdev->features |= NETIF_F_HIGHDMA; + if (vlan_tso_capable(adapter)) { +#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) + adapter->flags |= VLAN_ACCEL_CAPABLE; + netdev->features |= + NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; + netdev->vlan_rx_register = vlan_rx_register; + netdev->vlan_rx_kill_vid = vlan_rx_kill_vid; +#endif + adapter->flags |= TSO_CAPABLE; + netdev->features |= NETIF_F_TSO; + } + + netdev->open = cxgb_open; + netdev->stop = cxgb_close; + netdev->hard_start_xmit = t1_start_xmit; + netdev->hard_header_len += (adapter->flags & TSO_CAPABLE) ? + sizeof(struct cpl_tx_pkt_lso) : + sizeof(struct cpl_tx_pkt); + netdev->get_stats = t1_get_stats; + netdev->set_multicast_list = t1_set_rxmode; + netdev->do_ioctl = t1_ioctl; + netdev->change_mtu = t1_change_mtu; + netdev->set_mac_address = t1_set_mac_addr; +#ifdef CONFIG_NET_POLL_CONTROLLER + netdev->poll_controller = t1_netpoll; +#endif + netdev->weight = 64; + + SET_ETHTOOL_OPS(netdev, &t1_ethtool_ops); + } + + if (t1_init_sw_modules(adapter, bi) < 0) { + err = -ENODEV; + goto out_free_dev; + } + + /* + * The card is now ready to go. If any errors occur during device + * registration we do not fail the whole card but rather proceed only + * with the ports we manage to register successfully. However we must + * register at least one net device. + */ + for (i = 0; i < bi->port_number; ++i) { + err = register_netdev(adapter->port[i].dev); + if (err) + CH_WARN("%s: cannot register net device %s, skipping\n", + pci_name(pdev), adapter->port[i].dev->name); + else { + /* + * Change the name we use for messages to the name of + * the first successfully registered interface. + */ + if (!adapter->registered_device_map) + adapter->name = adapter->port[i].dev->name; + + __set_bit(i, &adapter->registered_device_map); + } + } + if (!adapter->registered_device_map) { + CH_ERR("%s: could not register any net devices\n", + pci_name(pdev)); + goto out_release_adapter_res; + } + + printk(KERN_INFO "%s: %s (rev %d), %s %dMHz/%d-bit\n", adapter->name, + bi->desc, adapter->params.chip_revision, + adapter->params.pci.is_pcix ? "PCIX" : "PCI", + adapter->params.pci.speed, adapter->params.pci.width); + return 0; + + out_release_adapter_res: + t1_free_sw_modules(adapter); + out_free_dev: + if (adapter) { + if (adapter->regs) iounmap(adapter->regs); + for (i = bi->port_number - 1; i >= 0; --i) + if (adapter->port[i].dev) { + cxgb_proc_cleanup(adapter, proc_root_driver); + kfree(adapter->port[i].dev); + } + } + pci_release_regions(pdev); + out_disable_pdev: + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + return err; +} + +static inline void t1_sw_reset(struct pci_dev *pdev) +{ + pci_write_config_dword(pdev, A_PCICFG_PM_CSR, 3); + pci_write_config_dword(pdev, A_PCICFG_PM_CSR, 0); +} + +static void __devexit remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + + if (dev) { + int i; + struct adapter *adapter = dev->priv; + + for_each_port(adapter, i) + if (test_bit(i, &adapter->registered_device_map)) + unregister_netdev(adapter->port[i].dev); + + t1_free_sw_modules(adapter); + iounmap(adapter->regs); + while (--i >= 0) + if (adapter->port[i].dev) { + cxgb_proc_cleanup(adapter, proc_root_driver); + kfree(adapter->port[i].dev); + } + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + t1_sw_reset(pdev); + } +} + +static struct pci_driver driver = { + .name = DRV_NAME, + .id_table = t1_pci_tbl, + .probe = init_one, + .remove = __devexit_p(remove_one), +}; + +static int __init t1_init_module(void) +{ + return pci_module_init(&driver); +} + +static void __exit t1_cleanup_module(void) +{ + pci_unregister_driver(&driver); +} + +module_init(t1_init_module); +module_exit(t1_cleanup_module); diff --git a/drivers/net/chelsio/elmer0.h b/drivers/net/chelsio/elmer0.h new file mode 100644 index 000000000000..5590cb2dac19 --- /dev/null +++ b/drivers/net/chelsio/elmer0.h @@ -0,0 +1,151 @@ +/***************************************************************************** + * * + * File: elmer0.h * + * $Revision: 1.6 $ * + * $Date: 2005/06/21 22:49:43 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis <dm@chelsio.com> * + * Tina Yang <tainay@chelsio.com> * + * Felix Marti <felix@chelsio.com> * + * Scott Bardone <sbardone@chelsio.com> * + * Kurt Ottaway <kottaway@chelsio.com> * + * Frank DiMambro <frank@chelsio.com> * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef _CXGB_ELMER0_H_ +#define _CXGB_ELMER0_H_ + +/* ELMER0 registers */ +#define A_ELMER0_VERSION 0x100000 +#define A_ELMER0_PHY_CFG 0x100004 +#define A_ELMER0_INT_ENABLE 0x100008 +#define A_ELMER0_INT_CAUSE 0x10000c +#define A_ELMER0_GPI_CFG 0x100010 +#define A_ELMER0_GPI_STAT 0x100014 +#define A_ELMER0_GPO 0x100018 +#define A_ELMER0_PORT0_MI1_CFG 0x400000 + +#define S_MI1_MDI_ENABLE 0 +#define V_MI1_MDI_ENABLE(x) ((x) << S_MI1_MDI_ENABLE) +#define F_MI1_MDI_ENABLE V_MI1_MDI_ENABLE(1U) + +#define S_MI1_MDI_INVERT 1 +#define V_MI1_MDI_INVERT(x) ((x) << S_MI1_MDI_INVERT) +#define F_MI1_MDI_INVERT V_MI1_MDI_INVERT(1U) + +#define S_MI1_PREAMBLE_ENABLE 2 +#define V_MI1_PREAMBLE_ENABLE(x) ((x) << S_MI1_PREAMBLE_ENABLE) +#define F_MI1_PREAMBLE_ENABLE V_MI1_PREAMBLE_ENABLE(1U) + +#define S_MI1_SOF 3 +#define M_MI1_SOF 0x3 +#define V_MI1_SOF(x) ((x) << S_MI1_SOF) +#define G_MI1_SOF(x) (((x) >> S_MI1_SOF) & M_MI1_SOF) + +#define S_MI1_CLK_DIV 5 +#define M_MI1_CLK_DIV 0xff +#define V_MI1_CLK_DIV(x) ((x) << S_MI1_CLK_DIV) +#define G_MI1_CLK_DIV(x) (((x) >> S_MI1_CLK_DIV) & M_MI1_CLK_DIV) + +#define A_ELMER0_PORT0_MI1_ADDR 0x400004 + +#define S_MI1_REG_ADDR 0 +#define M_MI1_REG_ADDR 0x1f +#define V_MI1_REG_ADDR(x) ((x) << S_MI1_REG_ADDR) +#define G_MI1_REG_ADDR(x) (((x) >> S_MI1_REG_ADDR) & M_MI1_REG_ADDR) + +#define S_MI1_PHY_ADDR 5 +#define M_MI1_PHY_ADDR 0x1f +#define V_MI1_PHY_ADDR(x) ((x) << S_MI1_PHY_ADDR) +#define G_MI1_PHY_ADDR(x) (((x) >> S_MI1_PHY_ADDR) & M_MI1_PHY_ADDR) + +#define A_ELMER0_PORT0_MI1_DATA 0x400008 + +#define S_MI1_DATA 0 +#define M_MI1_DATA 0xffff +#define V_MI1_DATA(x) ((x) << S_MI1_DATA) +#define G_MI1_DATA(x) (((x) >> S_MI1_DATA) & M_MI1_DATA) + +#define A_ELMER0_PORT0_MI1_OP 0x40000c + +#define S_MI1_OP 0 +#define M_MI1_OP 0x3 +#define V_MI1_OP(x) ((x) << S_MI1_OP) +#define G_MI1_OP(x) (((x) >> S_MI1_OP) & M_MI1_OP) + +#define S_MI1_ADDR_AUTOINC 2 +#define V_MI1_ADDR_AUTOINC(x) ((x) << S_MI1_ADDR_AUTOINC) +#define F_MI1_ADDR_AUTOINC V_MI1_ADDR_AUTOINC(1U) + +#define S_MI1_OP_BUSY 31 +#define V_MI1_OP_BUSY(x) ((x) << S_MI1_OP_BUSY) +#define F_MI1_OP_BUSY V_MI1_OP_BUSY(1U) + +#define A_ELMER0_PORT1_MI1_CFG 0x500000 +#define A_ELMER0_PORT1_MI1_ADDR 0x500004 +#define A_ELMER0_PORT1_MI1_DATA 0x500008 +#define A_ELMER0_PORT1_MI1_OP 0x50000c +#define A_ELMER0_PORT2_MI1_CFG 0x600000 +#define A_ELMER0_PORT2_MI1_ADDR 0x600004 +#define A_ELMER0_PORT2_MI1_DATA 0x600008 +#define A_ELMER0_PORT2_MI1_OP 0x60000c +#define A_ELMER0_PORT3_MI1_CFG 0x700000 +#define A_ELMER0_PORT3_MI1_ADDR 0x700004 +#define A_ELMER0_PORT3_MI1_DATA 0x700008 +#define A_ELMER0_PORT3_MI1_OP 0x70000c + +/* Simple bit definition for GPI and GP0 registers. */ +#define ELMER0_GP_BIT0 0x0001 +#define ELMER0_GP_BIT1 0x0002 +#define ELMER0_GP_BIT2 0x0004 +#define ELMER0_GP_BIT3 0x0008 +#define ELMER0_GP_BIT4 0x0010 +#define ELMER0_GP_BIT5 0x0020 +#define ELMER0_GP_BIT6 0x0040 +#define ELMER0_GP_BIT7 0x0080 +#define ELMER0_GP_BIT8 0x0100 +#define ELMER0_GP_BIT9 0x0200 +#define ELMER0_GP_BIT10 0x0400 +#define ELMER0_GP_BIT11 0x0800 +#define ELMER0_GP_BIT12 0x1000 +#define ELMER0_GP_BIT13 0x2000 +#define ELMER0_GP_BIT14 0x4000 +#define ELMER0_GP_BIT15 0x8000 +#define ELMER0_GP_BIT16 0x10000 +#define ELMER0_GP_BIT17 0x20000 +#define ELMER0_GP_BIT18 0x40000 +#define ELMER0_GP_BIT19 0x80000 + +#define MI1_OP_DIRECT_WRITE 1 +#define MI1_OP_DIRECT_READ 2 + +#define MI1_OP_INDIRECT_ADDRESS 0 +#define MI1_OP_INDIRECT_WRITE 1 +#define MI1_OP_INDIRECT_READ_INC 2 +#define MI1_OP_INDIRECT_READ 3 + +#endif /* _CXGB_ELMER0_H_ */ diff --git a/drivers/net/chelsio/espi.c b/drivers/net/chelsio/espi.c new file mode 100644 index 000000000000..230642571c92 --- /dev/null +++ b/drivers/net/chelsio/espi.c @@ -0,0 +1,346 @@ +/***************************************************************************** + * * + * File: espi.c * + * $Revision: 1.14 $ * + * $Date: 2005/05/14 00:59:32 $ * + * Description: * + * Ethernet SPI functionality. * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis <dm@chelsio.com> * + * Tina Yang <tainay@chelsio.com> * + * Felix Marti <felix@chelsio.com> * + * Scott Bardone <sbardone@chelsio.com> * + * Kurt Ottaway <kottaway@chelsio.com> * + * Frank DiMambro <frank@chelsio.com> * + * * + * History: * + * * + ****************************************************************************/ + +#include "common.h" +#include "regs.h" +#include "espi.h" + +struct peespi { + adapter_t *adapter; + struct espi_intr_counts intr_cnt; + u32 misc_ctrl; + spinlock_t lock; +}; + +#define ESPI_INTR_MASK (F_DIP4ERR | F_RXDROP | F_TXDROP | F_RXOVERFLOW | \ + F_RAMPARITYERR | F_DIP2PARITYERR) +#define MON_MASK (V_MONITORED_PORT_NUM(3) | F_MONITORED_DIRECTION \ + | F_MONITORED_INTERFACE) + +#define TRICN_CNFG 14 +#define TRICN_CMD_READ 0x11 +#define TRICN_CMD_WRITE 0x21 +#define TRICN_CMD_ATTEMPTS 10 + +static int tricn_write(adapter_t *adapter, int bundle_addr, int module_addr, + int ch_addr, int reg_offset, u32 wr_data) +{ + int busy, attempts = TRICN_CMD_ATTEMPTS; + + writel(V_WRITE_DATA(wr_data) | + V_REGISTER_OFFSET(reg_offset) | + V_CHANNEL_ADDR(ch_addr) | V_MODULE_ADDR(module_addr) | + V_BUNDLE_ADDR(bundle_addr) | + V_SPI4_COMMAND(TRICN_CMD_WRITE), + adapter->regs + A_ESPI_CMD_ADDR); + writel(0, adapter->regs + A_ESPI_GOSTAT); + + do { + busy = readl(adapter->regs + A_ESPI_GOSTAT) & F_ESPI_CMD_BUSY; + } while (busy && --attempts); + + if (busy) + CH_ERR("%s: TRICN write timed out\n", adapter->name); + + return busy; +} + +/* 1. Deassert rx_reset_core. */ +/* 2. Program TRICN_CNFG registers. */ +/* 3. Deassert rx_reset_link */ +static int tricn_init(adapter_t *adapter) +{ + int i = 0; + int sme = 1; + int stat = 0; + int timeout = 0; + int is_ready = 0; + int dynamic_deskew = 0; + + if (dynamic_deskew) + sme = 0; + + + /* 1 */ + timeout=1000; + do { + stat = readl(adapter->regs + A_ESPI_RX_RESET); + is_ready = (stat & 0x4); + timeout--; + udelay(5); + } while (!is_ready || (timeout==0)); + writel(0x2, adapter->regs + A_ESPI_RX_RESET); + if (timeout==0) + { + CH_ERR("ESPI : ERROR : Timeout tricn_init() \n"); + t1_fatal_err(adapter); + } + + /* 2 */ + if (sme) { + tricn_write(adapter, 0, 0, 0, TRICN_CNFG, 0x81); + tricn_write(adapter, 0, 1, 0, TRICN_CNFG, 0x81); + tricn_write(adapter, 0, 2, 0, TRICN_CNFG, 0x81); + } + for (i=1; i<= 8; i++) tricn_write(adapter, 0, 0, i, TRICN_CNFG, 0xf1); + for (i=1; i<= 2; i++) tricn_write(adapter, 0, 1, i, TRICN_CNFG, 0xf1); + for (i=1; i<= 3; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xe1); + for (i=4; i<= 4; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1); + for (i=5; i<= 5; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xe1); + for (i=6; i<= 6; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1); + for (i=7; i<= 7; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0x80); + for (i=8; i<= 8; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1); + + /* 3 */ + writel(0x3, adapter->regs + A_ESPI_RX_RESET); + + return 0; +} + +void t1_espi_intr_enable(struct peespi *espi) +{ + u32 enable, pl_intr = readl(espi->adapter->regs + A_PL_ENABLE); + + /* + * Cannot enable ESPI interrupts on T1B because HW asserts the + * interrupt incorrectly, namely the driver gets ESPI interrupts + * but no data is actually dropped (can verify this reading the ESPI + * drop registers). Also, once the ESPI interrupt is asserted it + * cannot be cleared (HW bug). + */ + enable = t1_is_T1B(espi->adapter) ? 0 : ESPI_INTR_MASK; + writel(enable, espi->adapter->regs + A_ESPI_INTR_ENABLE); + writel(pl_intr | F_PL_INTR_ESPI, espi->adapter->regs + A_PL_ENABLE); +} + +void t1_espi_intr_clear(struct peespi *espi) +{ + writel(0xffffffff, espi->adapter->regs + A_ESPI_INTR_STATUS); + writel(F_PL_INTR_ESPI, espi->adapter->regs + A_PL_CAUSE); +} + +void t1_espi_intr_disable(struct peespi *espi) +{ + u32 pl_intr = readl(espi->adapter->regs + A_PL_ENABLE); + + writel(0, espi->adapter->regs + A_ESPI_INTR_ENABLE); + writel(pl_intr & ~F_PL_INTR_ESPI, espi->adapter->regs + A_PL_ENABLE); +} + +int t1_espi_intr_handler(struct peespi *espi) +{ + u32 cnt; + u32 status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS); + + if (status & F_DIP4ERR) + espi->intr_cnt.DIP4_err++; + if (status & F_RXDROP) + espi->intr_cnt.rx_drops++; + if (status & F_TXDROP) + espi->intr_cnt.tx_drops++; + if (status & F_RXOVERFLOW) + espi->intr_cnt.rx_ovflw++; + if (status & F_RAMPARITYERR) + espi->intr_cnt.parity_err++; + if (status & F_DIP2PARITYERR) { + espi->intr_cnt.DIP2_parity_err++; + + /* + * Must read the error count to clear the interrupt + * that it causes. + */ + cnt = readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT); + } + + /* + * For T1B we need to write 1 to clear ESPI interrupts. For T2+ we + * write the status as is. + */ + if (status && t1_is_T1B(espi->adapter)) + status = 1; + writel(status, espi->adapter->regs + A_ESPI_INTR_STATUS); + return 0; +} + +const struct espi_intr_counts *t1_espi_get_intr_counts(struct peespi *espi) +{ + return &espi->intr_cnt; +} + +static void espi_setup_for_pm3393(adapter_t *adapter) +{ + u32 wmark = t1_is_T1B(adapter) ? 0x4000 : 0x3200; + + writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN0); + writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN1); + writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN2); + writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN3); + writel(0x100, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK); + writel(wmark, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK); + writel(3, adapter->regs + A_ESPI_CALENDAR_LENGTH); + writel(0x08000008, adapter->regs + A_ESPI_TRAIN); + writel(V_RX_NPORTS(1) | V_TX_NPORTS(1), adapter->regs + A_PORT_CONFIG); +} + +/* T2 Init part -- */ +/* 1. Set T_ESPI_MISCCTRL_ADDR */ +/* 2. Init ESPI registers. */ +/* 3. Init TriCN Hard Macro */ +int t1_espi_init(struct peespi *espi, int mac_type, int nports) +{ + u32 cnt; + + u32 status_enable_extra = 0; + adapter_t *adapter = espi->adapter; + u32 status, burstval = 0x800100; + + /* Disable ESPI training. MACs that can handle it enable it below. */ + writel(0, adapter->regs + A_ESPI_TRAIN); + + if (is_T2(adapter)) { + writel(V_OUT_OF_SYNC_COUNT(4) | + V_DIP2_PARITY_ERR_THRES(3) | + V_DIP4_THRES(1), adapter->regs + A_ESPI_MISC_CONTROL); + if (nports == 4) { + /* T204: maxburst1 = 0x40, maxburst2 = 0x20 */ + burstval = 0x200040; + } + } + writel(burstval, adapter->regs + A_ESPI_MAXBURST1_MAXBURST2); + + switch (mac_type) { + case CHBT_MAC_PM3393: + espi_setup_for_pm3393(adapter); + break; + default: + return -1; + } + + /* + * Make sure any pending interrupts from the SPI are + * Cleared before enabling the interrupt. + */ + writel(ESPI_INTR_MASK, espi->adapter->regs + A_ESPI_INTR_ENABLE); + status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS); + if (status & F_DIP2PARITYERR) { + cnt = readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT); + } + + /* + * For T1B we need to write 1 to clear ESPI interrupts. For T2+ we + * write the status as is. + */ + if (status && t1_is_T1B(espi->adapter)) + status = 1; + writel(status, espi->adapter->regs + A_ESPI_INTR_STATUS); + + writel(status_enable_extra | F_RXSTATUSENABLE, + adapter->regs + A_ESPI_FIFO_STATUS_ENABLE); + + if (is_T2(adapter)) { + tricn_init(adapter); + /* + * Always position the control at the 1st port egress IN + * (sop,eop) counter to reduce PIOs for T/N210 workaround. + */ + espi->misc_ctrl = (readl(adapter->regs + A_ESPI_MISC_CONTROL) + & ~MON_MASK) | (F_MONITORED_DIRECTION + | F_MONITORED_INTERFACE); + writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL); + spin_lock_init(&espi->lock); + } + + return 0; +} + +void t1_espi_destroy(struct peespi *espi) +{ + kfree(espi); +} + +struct peespi *t1_espi_create(adapter_t *adapter) +{ + struct peespi *espi = kmalloc(sizeof(*espi), GFP_KERNEL); + + memset(espi, 0, sizeof(*espi)); + + if (espi) + espi->adapter = adapter; + return espi; +} + +void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val) +{ + struct peespi *espi = adapter->espi; + + if (!is_T2(adapter)) + return; + spin_lock(&espi->lock); + espi->misc_ctrl = (val & ~MON_MASK) | + (espi->misc_ctrl & MON_MASK); + writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL); + spin_unlock(&espi->lock); +} + +u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait) +{ + u32 sel; + + struct peespi *espi = adapter->espi; + + if (!is_T2(adapter)) + return 0; + sel = V_MONITORED_PORT_NUM((addr & 0x3c) >> 2); + if (!wait) { + if (!spin_trylock(&espi->lock)) + return 0; + } + else + spin_lock(&espi->lock); + if ((sel != (espi->misc_ctrl & MON_MASK))) { + writel(((espi->misc_ctrl & ~MON_MASK) | sel), + adapter->regs + A_ESPI_MISC_CONTROL); + sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3); + writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL); + } + else + sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3); + spin_unlock(&espi->lock); + return sel; +} diff --git a/drivers/net/chelsio/espi.h b/drivers/net/chelsio/espi.h new file mode 100644 index 000000000000..c90e37f8457c --- /dev/null +++ b/drivers/net/chelsio/espi.h @@ -0,0 +1,68 @@ +/***************************************************************************** + * * + * File: espi.h * + * $Revision: 1.7 $ * + * $Date: 2005/06/21 18:29:47 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis <dm@chelsio.com> * + * Tina Yang <tainay@chelsio.com> * + * Felix Marti <felix@chelsio.com> * + * Scott Bardone <sbardone@chelsio.com> * + * Kurt Ottaway <kottaway@chelsio.com> * + * Frank DiMambro <frank@chelsio.com> * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef _CXGB_ESPI_H_ +#define _CXGB_ESPI_H_ + +#include "common.h" + +struct espi_intr_counts { + unsigned int DIP4_err; + unsigned int rx_drops; + unsigned int tx_drops; + unsigned int rx_ovflw; + unsigned int parity_err; + unsigned int DIP2_parity_err; +}; + +struct peespi; + +struct peespi *t1_espi_create(adapter_t *adapter); +void t1_espi_destroy(struct peespi *espi); +int t1_espi_init(struct peespi *espi, int mac_type, int nports); + +void t1_espi_intr_enable(struct peespi *); +void t1_espi_intr_clear(struct peespi *); +void t1_espi_intr_disable(struct peespi *); +int t1_espi_intr_handler(struct peespi *); +const struct espi_intr_counts *t1_espi_get_intr_counts(struct peespi *espi); + +void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val); +u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait); + +#endif /* _CXGB_ESPI_H_ */ diff --git a/drivers/net/chelsio/gmac.h b/drivers/net/chelsio/gmac.h new file mode 100644 index 000000000000..746b0eeea964 --- /dev/null +++ b/drivers/net/chelsio/gmac.h @@ -0,0 +1,134 @@ +/***************************************************************************** + * * + * File: gmac.h * + * $Revision: 1.6 $ * + * $Date: 2005/06/21 18:29:47 $ * + * Description: * + * Generic MAC functionality. * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis <dm@chelsio.com> * + * Tina Yang <tainay@chelsio.com> * + * Felix Marti <felix@chelsio.com> * + * Scott Bardone <sbardone@chelsio.com> * + * Kurt Ottaway <kottaway@chelsio.com> * + * Frank DiMambro <frank@chelsio.com> * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef _CXGB_GMAC_H_ +#define _CXGB_GMAC_H_ + +#include "common.h" + +enum { MAC_STATS_UPDATE_FAST, MAC_STATS_UPDATE_FULL }; +enum { MAC_DIRECTION_RX = 1, MAC_DIRECTION_TX = 2 }; + +struct cmac_statistics { + /* Transmit */ + u64 TxOctetsOK; + u64 TxOctetsBad; + u64 TxUnicastFramesOK; + u64 TxMulticastFramesOK; + u64 TxBroadcastFramesOK; + u64 TxPauseFrames; + u64 TxFramesWithDeferredXmissions; + u64 TxLateCollisions; + u64 TxTotalCollisions; + u64 TxFramesAbortedDueToXSCollisions; + u64 TxUnderrun; + u64 TxLengthErrors; + u64 TxInternalMACXmitError; + u64 TxFramesWithExcessiveDeferral; + u64 TxFCSErrors; + + /* Receive */ + u64 RxOctetsOK; + u64 RxOctetsBad; + u64 RxUnicastFramesOK; + u64 RxMulticastFramesOK; + u64 RxBroadcastFramesOK; + u64 RxPauseFrames; + u64 RxFCSErrors; + u64 RxAlignErrors; + u64 RxSymbolErrors; + u64 RxDataErrors; + u64 RxSequenceErrors; + u64 RxRuntErrors; + u64 RxJabberErrors; + u64 RxInternalMACRcvError; + u64 RxInRangeLengthErrors; + u64 RxOutOfRangeLengthField; + u64 RxFrameTooLongErrors; +}; + +struct cmac_ops { + void (*destroy)(struct cmac *); + int (*reset)(struct cmac *); + int (*interrupt_enable)(struct cmac *); + int (*interrupt_disable)(struct cmac *); + int (*interrupt_clear)(struct cmac *); + int (*interrupt_handler)(struct cmac *); + + int (*enable)(struct cmac *, int); + int (*disable)(struct cmac *, int); + + int (*loopback_enable)(struct cmac *); + int (*loopback_disable)(struct cmac *); + + int (*set_mtu)(struct cmac *, int mtu); + int (*set_rx_mode)(struct cmac *, struct t1_rx_mode *rm); + + int (*set_speed_duplex_fc)(struct cmac *, int speed, int duplex, int fc); + int (*get_speed_duplex_fc)(struct cmac *, int *speed, int *duplex, + int *fc); + + const struct cmac_statistics *(*statistics_update)(struct cmac *, int); + + int (*macaddress_get)(struct cmac *, u8 mac_addr[6]); + int (*macaddress_set)(struct cmac *, u8 mac_addr[6]); +}; + +typedef struct _cmac_instance cmac_instance; + +struct cmac { + struct cmac_statistics stats; + adapter_t *adapter; + struct cmac_ops *ops; + cmac_instance *instance; +}; + +struct gmac { + unsigned int stats_update_period; + struct cmac *(*create)(adapter_t *adapter, int index); + int (*reset)(adapter_t *); +}; + +extern struct gmac t1_pm3393_ops; +extern struct gmac t1_chelsio_mac_ops; +extern struct gmac t1_vsc7321_ops; +extern struct gmac t1_ixf1010_ops; +extern struct gmac t1_dummy_mac_ops; + +#endif /* _CXGB_GMAC_H_ */ diff --git a/drivers/net/chelsio/mv88x201x.c b/drivers/net/chelsio/mv88x201x.c new file mode 100644 index 000000000000..db5034282782 --- /dev/null +++ b/drivers/net/chelsio/mv88x201x.c @@ -0,0 +1,252 @@ +/***************************************************************************** + * * + * File: mv88x201x.c * + * $Revision: 1.12 $ * + * $Date: 2005/04/15 19:27:14 $ * + * Description: * + * Marvell PHY (mv88x201x) functionality. * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis <dm@chelsio.com> * + * Tina Yang <tainay@chelsio.com> * + * Felix Marti <felix@chelsio.com> * + * Scott Bardone <sbardone@chelsio.com> * + * Kurt Ottaway <kottaway@chelsio.com> * + * Frank DiMambro <frank@chelsio.com> * + * * + * History: * + * * + ****************************************************************************/ + +#include "cphy.h" +#include "elmer0.h" + +/* + * The 88x2010 Rev C. requires some link status registers * to be read + * twice in order to get the right values. Future * revisions will fix + * this problem and then this macro * can disappear. + */ +#define MV88x2010_LINK_STATUS_BUGS 1 + +static int led_init(struct cphy *cphy) +{ + /* Setup the LED registers so we can turn on/off. + * Writing these bits maps control to another + * register. mmd(0x1) addr(0x7) + */ + mdio_write(cphy, 0x3, 0x8304, 0xdddd); + return 0; +} + +static int led_link(struct cphy *cphy, u32 do_enable) +{ + u32 led = 0; +#define LINK_ENABLE_BIT 0x1 + + mdio_read(cphy, 0x1, 0x7, &led); + + if (do_enable & LINK_ENABLE_BIT) { + led |= LINK_ENABLE_BIT; + mdio_write(cphy, 0x1, 0x7, led); + } else { + led &= ~LINK_ENABLE_BIT; + mdio_write(cphy, 0x1, 0x7, led); + } + return 0; +} + +/* Port Reset */ +static int mv88x201x_reset(struct cphy *cphy, int wait) +{ + /* This can be done through registers. It is not required since + * a full chip reset is used. + */ + return 0; +} + +static int mv88x201x_interrupt_enable(struct cphy *cphy) +{ + u32 elmer; + + /* Enable PHY LASI interrupts. */ + mdio_write(cphy, 0x1, 0x9002, 0x1); + + /* Enable Marvell interrupts through Elmer0. */ + t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); + elmer |= ELMER0_GP_BIT6; + t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); + return 0; +} + +static int mv88x201x_interrupt_disable(struct cphy *cphy) +{ + u32 elmer; + + /* Disable PHY LASI interrupts. */ + mdio_write(cphy, 0x1, 0x9002, 0x0); + + /* Disable Marvell interrupts through Elmer0. */ + t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); + elmer &= ~ELMER0_GP_BIT6; + t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); + return 0; +} + +static int mv88x201x_interrupt_clear(struct cphy *cphy) +{ + u32 elmer; + u32 val; + +#ifdef MV88x2010_LINK_STATUS_BUGS + /* Required to read twice before clear takes affect. */ + mdio_read(cphy, 0x1, 0x9003, &val); + mdio_read(cphy, 0x1, 0x9004, &val); + mdio_read(cphy, 0x1, 0x9005, &val); + + /* Read this register after the others above it else + * the register doesn't clear correctly. + */ + mdio_read(cphy, 0x1, 0x1, &val); +#endif + + /* Clear link status. */ + mdio_read(cphy, 0x1, 0x1, &val); + /* Clear PHY LASI interrupts. */ + mdio_read(cphy, 0x1, 0x9005, &val); + +#ifdef MV88x2010_LINK_STATUS_BUGS + /* Do it again. */ + mdio_read(cphy, 0x1, 0x9003, &val); + mdio_read(cphy, 0x1, 0x9004, &val); +#endif + + /* Clear Marvell interrupts through Elmer0. */ + t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer); + elmer |= ELMER0_GP_BIT6; + t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer); + return 0; +} + +static int mv88x201x_interrupt_handler(struct cphy *cphy) +{ + /* Clear interrupts */ + mv88x201x_interrupt_clear(cphy); + + /* We have only enabled link change interrupts and so + * cphy_cause must be a link change interrupt. + */ + return cphy_cause_link_change; +} + +static int mv88x201x_set_loopback(struct cphy *cphy, int on) +{ + return 0; +} + +static int mv88x201x_get_link_status(struct cphy *cphy, int *link_ok, + int *speed, int *duplex, int *fc) +{ + u32 val = 0; +#define LINK_STATUS_BIT 0x4 + + if (link_ok) { + /* Read link status. */ + mdio_read(cphy, 0x1, 0x1, &val); + val &= LINK_STATUS_BIT; + *link_ok = (val == LINK_STATUS_BIT); + /* Turn on/off Link LED */ + led_link(cphy, *link_ok); + } + if (speed) + *speed = SPEED_10000; + if (duplex) + *duplex = DUPLEX_FULL; + if (fc) + *fc = PAUSE_RX | PAUSE_TX; + return 0; +} + +static void mv88x201x_destroy(struct cphy *cphy) +{ + kfree(cphy); +} + +static struct cphy_ops mv88x201x_ops = { + .destroy = mv88x201x_destroy, + .reset = mv88x201x_reset, + .interrupt_enable = mv88x201x_interrupt_enable, + .interrupt_disable = mv88x201x_interrupt_disable, + .interrupt_clear = mv88x201x_interrupt_clear, + .interrupt_handler = mv88x201x_interrupt_handler, + .get_link_status = mv88x201x_get_link_status, + .set_loopback = mv88x201x_set_loopback, +}; + +static struct cphy *mv88x201x_phy_create(adapter_t *adapter, int phy_addr, + struct mdio_ops *mdio_ops) +{ + u32 val; + struct cphy *cphy = kmalloc(sizeof(*cphy), GFP_KERNEL); + + if (!cphy) + return NULL; + memset(cphy, 0, sizeof(*cphy)); + cphy_init(cphy, adapter, phy_addr, &mv88x201x_ops, mdio_ops); + + /* Commands the PHY to enable XFP's clock. */ + mdio_read(cphy, 0x3, 0x8300, &val); + mdio_write(cphy, 0x3, 0x8300, val | 1); + + /* Clear link status. Required because of a bug in the PHY. */ + mdio_read(cphy, 0x1, 0x8, &val); + mdio_read(cphy, 0x3, 0x8, &val); + + /* Allows for Link,Ack LED turn on/off */ + led_init(cphy); + return cphy; +} + +/* Chip Reset */ +static int mv88x201x_phy_reset(adapter_t *adapter) +{ + u32 val; + + t1_tpi_read(adapter, A_ELMER0_GPO, &val); + val &= ~4; + t1_tpi_write(adapter, A_ELMER0_GPO, val); + msleep(100); + + t1_tpi_write(adapter, A_ELMER0_GPO, val | 4); + msleep(1000); + + /* Now lets enable the Laser. Delay 100us */ + t1_tpi_read(adapter, A_ELMER0_GPO, &val); + val |= 0x8000; + t1_tpi_write(adapter, A_ELMER0_GPO, val); + udelay(100); + return 0; +} + +struct gphy t1_mv88x201x_ops = { + mv88x201x_phy_create, + mv88x201x_phy_reset +}; diff --git a/drivers/net/chelsio/pm3393.c b/drivers/net/chelsio/pm3393.c new file mode 100644 index 000000000000..04a1404fc65e --- /dev/null +++ b/drivers/net/chelsio/pm3393.c @@ -0,0 +1,826 @@ +/***************************************************************************** + * * + * File: pm3393.c * + * $Revision: 1.16 $ * + * $Date: 2005/05/14 00:59:32 $ * + * Description: * + * PMC/SIERRA (pm3393) MAC-PHY functionality. * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis <dm@chelsio.com> * + * Tina Yang <tainay@chelsio.com> * + * Felix Marti <felix@chelsio.com> * + * Scott Bardone <sbardone@chelsio.com> * + * Kurt Ottaway <kottaway@chelsio.com> * + * Frank DiMambro <frank@chelsio.com> * + * * + * History: * + * * + ****************************************************************************/ + +#include "common.h" +#include "regs.h" +#include "gmac.h" +#include "elmer0.h" +#include "suni1x10gexp_regs.h" + +/* 802.3ae 10Gb/s MDIO Manageable Device(MMD) + */ +enum { + MMD_RESERVED, + MMD_PMAPMD, + MMD_WIS, + MMD_PCS, + MMD_PHY_XGXS, /* XGMII Extender Sublayer */ + MMD_DTE_XGXS, +}; + +enum { + PHY_XGXS_CTRL_1, + PHY_XGXS_STATUS_1 +}; + +#define OFFSET(REG_ADDR) (REG_ADDR << 2) + +/* Max frame size PM3393 can handle. Includes Ethernet header and CRC. */ +#define MAX_FRAME_SIZE 9600 + +#define IPG 12 +#define TXXG_CONF1_VAL ((IPG << SUNI1x10GEXP_BITOFF_TXXG_IPGT) | \ + SUNI1x10GEXP_BITMSK_TXXG_32BIT_ALIGN | SUNI1x10GEXP_BITMSK_TXXG_CRCEN | \ + SUNI1x10GEXP_BITMSK_TXXG_PADEN) +#define RXXG_CONF1_VAL (SUNI1x10GEXP_BITMSK_RXXG_PUREP | 0x14 | \ + SUNI1x10GEXP_BITMSK_RXXG_FLCHK | SUNI1x10GEXP_BITMSK_RXXG_CRC_STRIP) + +/* Update statistics every 15 minutes */ +#define STATS_TICK_SECS (15 * 60) + +enum { /* RMON registers */ + RxOctetsReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_1_LOW, + RxUnicastFramesReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_4_LOW, + RxMulticastFramesReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_5_LOW, + RxBroadcastFramesReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_6_LOW, + RxPAUSEMACCtrlFramesReceived = SUNI1x10GEXP_REG_MSTAT_COUNTER_8_LOW, + RxFrameCheckSequenceErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_10_LOW, + RxFramesLostDueToInternalMACErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_11_LOW, + RxSymbolErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_12_LOW, + RxInRangeLengthErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_13_LOW, + RxFramesTooLongErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_15_LOW, + RxJabbers = SUNI1x10GEXP_REG_MSTAT_COUNTER_16_LOW, + RxFragments = SUNI1x10GEXP_REG_MSTAT_COUNTER_17_LOW, + RxUndersizedFrames = SUNI1x10GEXP_REG_MSTAT_COUNTER_18_LOW, + + TxOctetsTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_33_LOW, + TxFramesLostDueToInternalMACTransmissionError = SUNI1x10GEXP_REG_MSTAT_COUNTER_35_LOW, + TxTransmitSystemError = SUNI1x10GEXP_REG_MSTAT_COUNTER_36_LOW, + TxUnicastFramesTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_38_LOW, + TxMulticastFramesTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_40_LOW, + TxBroadcastFramesTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_42_LOW, + TxPAUSEMACCtrlFramesTransmitted = SUNI1x10GEXP_REG_MSTAT_COUNTER_43_LOW +}; + +struct _cmac_instance { + u8 enabled; + u8 fc; + u8 mac_addr[6]; +}; + +static int pmread(struct cmac *cmac, u32 reg, u32 * data32) +{ + t1_tpi_read(cmac->adapter, OFFSET(reg), data32); + return 0; +} + +static int pmwrite(struct cmac *cmac, u32 reg, u32 data32) +{ + t1_tpi_write(cmac->adapter, OFFSET(reg), data32); + return 0; +} + +/* Port reset. */ +static int pm3393_reset(struct cmac *cmac) +{ + return 0; +} + +/* + * Enable interrupts for the PM3393 + + 1. Enable PM3393 BLOCK interrupts. + 2. Enable PM3393 Master Interrupt bit(INTE) + 3. Enable ELMER's PM3393 bit. + 4. Enable Terminator external interrupt. +*/ +static int pm3393_interrupt_enable(struct cmac *cmac) +{ + u32 pl_intr; + + /* PM3393 - Enabling all hardware block interrupts. + */ + pmwrite(cmac, SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_ENABLE, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_XRF_INTERRUPT_ENABLE, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_ENABLE, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_RXOAM_INTERRUPT_ENABLE, 0xffff); + + /* Don't interrupt on statistics overflow, we are polling */ + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_0, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_1, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_2, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_3, 0); + + pmwrite(cmac, SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_ENABLE, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_PL4ODP_INTERRUPT_MASK, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_XTEF_INTERRUPT_ENABLE, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_TXOAM_INTERRUPT_ENABLE, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_CONFIG_3, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_MASK, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_CONFIG_3, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_PL4IDU_INTERRUPT_MASK, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_ENABLE, 0xffff); + + /* PM3393 - Global interrupt enable + */ + /* TBD XXX Disable for now until we figure out why error interrupts keep asserting. */ + pmwrite(cmac, SUNI1x10GEXP_REG_GLOBAL_INTERRUPT_ENABLE, + 0 /*SUNI1x10GEXP_BITMSK_TOP_INTE */ ); + + /* TERMINATOR - PL_INTERUPTS_EXT */ + pl_intr = readl(cmac->adapter->regs + A_PL_ENABLE); + pl_intr |= F_PL_INTR_EXT; + writel(pl_intr, cmac->adapter->regs + A_PL_ENABLE); + return 0; +} + +static int pm3393_interrupt_disable(struct cmac *cmac) +{ + u32 elmer; + + /* PM3393 - Enabling HW interrupt blocks. */ + pmwrite(cmac, SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_ENABLE, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_XRF_INTERRUPT_ENABLE, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_ENABLE, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_RXOAM_INTERRUPT_ENABLE, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_0, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_1, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_2, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_3, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_ENABLE, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_PL4ODP_INTERRUPT_MASK, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_XTEF_INTERRUPT_ENABLE, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_TXOAM_INTERRUPT_ENABLE, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_CONFIG_3, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_MASK, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_CONFIG_3, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_PL4IDU_INTERRUPT_MASK, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_ENABLE, 0); + + /* PM3393 - Global interrupt enable */ + pmwrite(cmac, SUNI1x10GEXP_REG_GLOBAL_INTERRUPT_ENABLE, 0); + + /* ELMER - External chip interrupts. */ + t1_tpi_read(cmac->adapter, A_ELMER0_INT_ENABLE, &elmer); + elmer &= ~ELMER0_GP_BIT1; + t1_tpi_write(cmac->adapter, A_ELMER0_INT_ENABLE, elmer); + + /* TERMINATOR - PL_INTERUPTS_EXT */ + /* DO NOT DISABLE TERMINATOR's EXTERNAL INTERRUPTS. ANOTHER CHIP + * COULD WANT THEM ENABLED. We disable PM3393 at the ELMER level. + */ + + return 0; +} + +static int pm3393_interrupt_clear(struct cmac *cmac) +{ + u32 elmer; + u32 pl_intr; + u32 val32; + + /* PM3393 - Clearing HW interrupt blocks. Note, this assumes + * bit WCIMODE=0 for a clear-on-read. + */ + pmread(cmac, SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_STATUS, &val32); + pmread(cmac, SUNI1x10GEXP_REG_XRF_INTERRUPT_STATUS, &val32); + pmread(cmac, SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_STATUS, &val32); + pmread(cmac, SUNI1x10GEXP_REG_RXOAM_INTERRUPT_STATUS, &val32); + pmread(cmac, SUNI1x10GEXP_REG_PL4ODP_INTERRUPT, &val32); + pmread(cmac, SUNI1x10GEXP_REG_XTEF_INTERRUPT_STATUS, &val32); + pmread(cmac, SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_INTERRUPT, &val32); + pmread(cmac, SUNI1x10GEXP_REG_TXOAM_INTERRUPT_STATUS, &val32); + pmread(cmac, SUNI1x10GEXP_REG_RXXG_INTERRUPT, &val32); + pmread(cmac, SUNI1x10GEXP_REG_TXXG_INTERRUPT, &val32); + pmread(cmac, SUNI1x10GEXP_REG_PL4IDU_INTERRUPT, &val32); + pmread(cmac, SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_INDICATION, + &val32); + pmread(cmac, SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_STATUS, &val32); + pmread(cmac, SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_CHANGE, &val32); + + /* PM3393 - Global interrupt status + */ + pmread(cmac, SUNI1x10GEXP_REG_MASTER_INTERRUPT_STATUS, &val32); + + /* ELMER - External chip interrupts. + */ + t1_tpi_read(cmac->adapter, A_ELMER0_INT_CAUSE, &elmer); + elmer |= ELMER0_GP_BIT1; + t1_tpi_write(cmac->adapter, A_ELMER0_INT_CAUSE, elmer); + + /* TERMINATOR - PL_INTERUPTS_EXT + */ + pl_intr = readl(cmac->adapter->regs + A_PL_CAUSE); + pl_intr |= F_PL_INTR_EXT; + writel(pl_intr, cmac->adapter->regs + A_PL_CAUSE); + + return 0; +} + +/* Interrupt handler */ +static int pm3393_interrupt_handler(struct cmac *cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ + /* Read the master interrupt status register. */ + pmread(cmac, SUNI1x10GEXP_REG_MASTER_INTERRUPT_STATUS, + &master_intr_status); + + /* TBD XXX Lets just clear everything for now */ + pm3393_interrupt_clear(cmac); + + return 0; +} + +static int pm3393_enable(struct cmac *cmac, int which) +{ + if (which & MAC_DIRECTION_RX) + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_CONFIG_1, + (RXXG_CONF1_VAL | SUNI1x10GEXP_BITMSK_RXXG_RXEN)); + + if (which & MAC_DIRECTION_TX) { + u32 val = TXXG_CONF1_VAL | SUNI1x10GEXP_BITMSK_TXXG_TXEN0; + + if (cmac->instance->fc & PAUSE_RX) + val |= SUNI1x10GEXP_BITMSK_TXXG_FCRX; + if (cmac->instance->fc & PAUSE_TX) + val |= SUNI1x10GEXP_BITMSK_TXXG_FCTX; + pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_CONFIG_1, val); + } + + cmac->instance->enabled |= which; + return 0; +} + +static int pm3393_enable_port(struct cmac *cmac, int which) +{ + /* Clear port statistics */ + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_CONTROL, + SUNI1x10GEXP_BITMSK_MSTAT_CLEAR); + udelay(2); + memset(&cmac->stats, 0, sizeof(struct cmac_statistics)); + + pm3393_enable(cmac, which); + + /* + * XXX This should be done by the PHY and preferrably not at all. + * The PHY doesn't give us link status indication on its own so have + * the link management code query it instead. + */ + { + extern void link_changed(adapter_t *adapter, int port_id); + + link_changed(cmac->adapter, 0); + } + return 0; +} + +static int pm3393_disable(struct cmac *cmac, int which) +{ + if (which & MAC_DIRECTION_RX) + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_CONFIG_1, RXXG_CONF1_VAL); + if (which & MAC_DIRECTION_TX) + pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_CONFIG_1, TXXG_CONF1_VAL); + + /* + * The disable is graceful. Give the PM3393 time. Can't wait very + * long here, we may be holding locks. + */ + udelay(20); + + cmac->instance->enabled &= ~which; + return 0; +} + +static int pm3393_loopback_enable(struct cmac *cmac) +{ + return 0; +} + +static int pm3393_loopback_disable(struct cmac *cmac) +{ + return 0; +} + +static int pm3393_set_mtu(struct cmac *cmac, int mtu) +{ + int enabled = cmac->instance->enabled; + + /* MAX_FRAME_SIZE includes header + FCS, mtu doesn't */ + mtu += 14 + 4; + if (mtu > MAX_FRAME_SIZE) + return -EINVAL; + + /* Disable Rx/Tx MAC before configuring it. */ + if (enabled) + pm3393_disable(cmac, MAC_DIRECTION_RX | MAC_DIRECTION_TX); + + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MAX_FRAME_LENGTH, mtu); + pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_MAX_FRAME_SIZE, mtu); + + if (enabled) + pm3393_enable(cmac, enabled); + return 0; +} + +static u32 calc_crc(u8 *b, int len) +{ + int i; + u32 crc = (u32)~0; + + /* calculate crc one bit at a time */ + while (len--) { + crc ^= *b++; + for (i = 0; i < 8; i++) { + if (crc & 0x1) + crc = (crc >> 1) ^ 0xedb88320; + else + crc = (crc >> 1); + } + } + + /* reverse bits */ + crc = ((crc >> 4) & 0x0f0f0f0f) | ((crc << 4) & 0xf0f0f0f0); + crc = ((crc >> 2) & 0x33333333) | ((crc << 2) & 0xcccccccc); + crc = ((crc >> 1) & 0x55555555) | ((crc << 1) & 0xaaaaaaaa); + /* swap bytes */ + crc = (crc >> 16) | (crc << 16); + crc = (crc >> 8 & 0x00ff00ff) | (crc << 8 & 0xff00ff00); + + return crc; +} + +static int pm3393_set_rx_mode(struct cmac *cmac, struct t1_rx_mode *rm) +{ + int enabled = cmac->instance->enabled & MAC_DIRECTION_RX; + u32 rx_mode; + + /* Disable MAC RX before reconfiguring it */ + if (enabled) + pm3393_disable(cmac, MAC_DIRECTION_RX); + + pmread(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_2, &rx_mode); + rx_mode &= ~(SUNI1x10GEXP_BITMSK_RXXG_PMODE | + SUNI1x10GEXP_BITMSK_RXXG_MHASH_EN); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_2, + (u16)rx_mode); + + if (t1_rx_mode_promisc(rm)) { + /* Promiscuous mode. */ + rx_mode |= SUNI1x10GEXP_BITMSK_RXXG_PMODE; + } + if (t1_rx_mode_allmulti(rm)) { + /* Accept all multicast. */ + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_LOW, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDLOW, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDHIGH, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_HIGH, 0xffff); + rx_mode |= SUNI1x10GEXP_BITMSK_RXXG_MHASH_EN; + } else if (t1_rx_mode_mc_cnt(rm)) { + /* Accept one or more multicast(s). */ + u8 *addr; + int bit; + u16 mc_filter[4] = { 0, }; + + while ((addr = t1_get_next_mcaddr(rm))) { + bit = (calc_crc(addr, ETH_ALEN) >> 23) & 0x3f; /* bit[23:28] */ + mc_filter[bit >> 4] |= 1 << (bit & 0xf); + } + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_LOW, mc_filter[0]); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDLOW, mc_filter[1]); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDHIGH, mc_filter[2]); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_HIGH, mc_filter[3]); + rx_mode |= SUNI1x10GEXP_BITMSK_RXXG_MHASH_EN; + } + + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_2, (u16)rx_mode); + + if (enabled) + pm3393_enable(cmac, MAC_DIRECTION_RX); + + return 0; +} + +static int pm3393_get_speed_duplex_fc(struct cmac *cmac, int *speed, + int *duplex, int *fc) +{ + if (speed) + *speed = SPEED_10000; + if (duplex) + *duplex = DUPLEX_FULL; + if (fc) + *fc = cmac->instance->fc; + return 0; +} + +static int pm3393_set_speed_duplex_fc(struct cmac *cmac, int speed, int duplex, + int fc) +{ + if (speed >= 0 && speed != SPEED_10000) + return -1; + if (duplex >= 0 && duplex != DUPLEX_FULL) + return -1; + if (fc & ~(PAUSE_TX | PAUSE_RX)) + return -1; + + if (fc != cmac->instance->fc) { + cmac->instance->fc = (u8) fc; + if (cmac->instance->enabled & MAC_DIRECTION_TX) + pm3393_enable(cmac, MAC_DIRECTION_TX); + } + return 0; +} + +#define RMON_UPDATE(mac, name, stat_name) \ + { \ + t1_tpi_read((mac)->adapter, OFFSET(name), &val0); \ + t1_tpi_read((mac)->adapter, OFFSET(((name)+1)), &val1); \ + t1_tpi_read((mac)->adapter, OFFSET(((name)+2)), &val2); \ + (mac)->stats.stat_name = ((u64)val0 & 0xffff) | \ + (((u64)val1 & 0xffff) << 16) | \ + (((u64)val2 & 0xff) << 32) | \ + ((mac)->stats.stat_name & \ + (~(u64)0 << 40)); \ + if (ro & \ + ((name - SUNI1x10GEXP_REG_MSTAT_COUNTER_0_LOW) >> 2)) \ + (mac)->stats.stat_name += ((u64)1 << 40); \ + } + +static const struct cmac_statistics *pm3393_update_statistics(struct cmac *mac, + int flag) +{ + u64 ro; + u32 val0, val1, val2, val3; + + /* Snap the counters */ + pmwrite(mac, SUNI1x10GEXP_REG_MSTAT_CONTROL, + SUNI1x10GEXP_BITMSK_MSTAT_SNAP); + + /* Counter rollover, clear on read */ + pmread(mac, SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_0, &val0); + pmread(mac, SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_1, &val1); + pmread(mac, SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_2, &val2); + pmread(mac, SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_3, &val3); + ro = ((u64)val0 & 0xffff) | (((u64)val1 & 0xffff) << 16) | + (((u64)val2 & 0xffff) << 32) | (((u64)val3 & 0xffff) << 48); + + /* Rx stats */ + RMON_UPDATE(mac, RxOctetsReceivedOK, RxOctetsOK); + RMON_UPDATE(mac, RxUnicastFramesReceivedOK, RxUnicastFramesOK); + RMON_UPDATE(mac, RxMulticastFramesReceivedOK, RxMulticastFramesOK); + RMON_UPDATE(mac, RxBroadcastFramesReceivedOK, RxBroadcastFramesOK); + RMON_UPDATE(mac, RxPAUSEMACCtrlFramesReceived, RxPauseFrames); + RMON_UPDATE(mac, RxFrameCheckSequenceErrors, RxFCSErrors); + RMON_UPDATE(mac, RxFramesLostDueToInternalMACErrors, + RxInternalMACRcvError); + RMON_UPDATE(mac, RxSymbolErrors, RxSymbolErrors); + RMON_UPDATE(mac, RxInRangeLengthErrors, RxInRangeLengthErrors); + RMON_UPDATE(mac, RxFramesTooLongErrors , RxFrameTooLongErrors); + RMON_UPDATE(mac, RxJabbers, RxJabberErrors); + RMON_UPDATE(mac, RxFragments, RxRuntErrors); + RMON_UPDATE(mac, RxUndersizedFrames, RxRuntErrors); + + /* Tx stats */ + RMON_UPDATE(mac, TxOctetsTransmittedOK, TxOctetsOK); + RMON_UPDATE(mac, TxFramesLostDueToInternalMACTransmissionError, + TxInternalMACXmitError); + RMON_UPDATE(mac, TxTransmitSystemError, TxFCSErrors); + RMON_UPDATE(mac, TxUnicastFramesTransmittedOK, TxUnicastFramesOK); + RMON_UPDATE(mac, TxMulticastFramesTransmittedOK, TxMulticastFramesOK); + RMON_UPDATE(mac, TxBroadcastFramesTransmittedOK, TxBroadcastFramesOK); + RMON_UPDATE(mac, TxPAUSEMACCtrlFramesTransmitted, TxPauseFrames); + + return &mac->stats; +} + +static int pm3393_macaddress_get(struct cmac *cmac, u8 mac_addr[6]) +{ + memcpy(mac_addr, cmac->instance->mac_addr, 6); + return 0; +} + +static int pm3393_macaddress_set(struct cmac *cmac, u8 ma[6]) +{ + u32 val, lo, mid, hi, enabled = cmac->instance->enabled; + + /* + * MAC addr: 00:07:43:00:13:09 + * + * ma[5] = 0x09 + * ma[4] = 0x13 + * ma[3] = 0x00 + * ma[2] = 0x43 + * ma[1] = 0x07 + * ma[0] = 0x00 + * + * The PM3393 requires byte swapping and reverse order entry + * when programming MAC addresses: + * + * low_bits[15:0] = ma[1]:ma[0] + * mid_bits[31:16] = ma[3]:ma[2] + * high_bits[47:32] = ma[5]:ma[4] + */ + + /* Store local copy */ + memcpy(cmac->instance->mac_addr, ma, 6); + + lo = ((u32) ma[1] << 8) | (u32) ma[0]; + mid = ((u32) ma[3] << 8) | (u32) ma[2]; + hi = ((u32) ma[5] << 8) | (u32) ma[4]; + + /* Disable Rx/Tx MAC before configuring it. */ + if (enabled) + pm3393_disable(cmac, MAC_DIRECTION_RX | MAC_DIRECTION_TX); + + /* Set RXXG Station Address */ + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_SA_15_0, lo); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_SA_31_16, mid); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_SA_47_32, hi); + + /* Set TXXG Station Address */ + pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_SA_15_0, lo); + pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_SA_31_16, mid); + pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_SA_47_32, hi); + + /* Setup Exact Match Filter 1 with our MAC address + * + * Must disable exact match filter before configuring it. + */ + pmread(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_0, &val); + val &= 0xff0f; + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_0, val); + + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_LOW, lo); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_MID, mid); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_HIGH, hi); + + val |= 0x0090; + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_0, val); + + if (enabled) + pm3393_enable(cmac, enabled); + return 0; +} + +static void pm3393_destroy(struct cmac *cmac) +{ + kfree(cmac); +} + +static struct cmac_ops pm3393_ops = { + .destroy = pm3393_destroy, + .reset = pm3393_reset, + .interrupt_enable = pm3393_interrupt_enable, + .interrupt_disable = pm3393_interrupt_disable, + .interrupt_clear = pm3393_interrupt_clear, + .interrupt_handler = pm3393_interrupt_handler, + .enable = pm3393_enable_port, + .disable = pm3393_disable, + .loopback_enable = pm3393_loopback_enable, + .loopback_disable = pm3393_loopback_disable, + .set_mtu = pm3393_set_mtu, + .set_rx_mode = pm3393_set_rx_mode, + .get_speed_duplex_fc = pm3393_get_speed_duplex_fc, + .set_speed_duplex_fc = pm3393_set_speed_duplex_fc, + .statistics_update = pm3393_update_statistics, + .macaddress_get = pm3393_macaddress_get, + .macaddress_set = pm3393_macaddress_set +}; + +static struct cmac *pm3393_mac_create(adapter_t *adapter, int index) +{ + struct cmac *cmac; + + cmac = kmalloc(sizeof(*cmac) + sizeof(cmac_instance), GFP_KERNEL); + if (!cmac) + return NULL; + memset(cmac, 0, sizeof(*cmac)); + + cmac->ops = &pm3393_ops; + cmac->instance = (cmac_instance *) (cmac + 1); + cmac->adapter = adapter; + cmac->instance->fc = PAUSE_TX | PAUSE_RX; + + t1_tpi_write(adapter, OFFSET(0x0001), 0x00008000); + t1_tpi_write(adapter, OFFSET(0x0001), 0x00000000); + t1_tpi_write(adapter, OFFSET(0x2308), 0x00009800); + t1_tpi_write(adapter, OFFSET(0x2305), 0x00001001); /* PL4IO Enable */ + t1_tpi_write(adapter, OFFSET(0x2320), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2321), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2322), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2323), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2324), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2325), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2326), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2327), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2328), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2329), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x232a), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x232b), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x232c), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x232d), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x232e), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x232f), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x230d), 0x00009c00); + t1_tpi_write(adapter, OFFSET(0x2304), 0x00000202); /* PL4IO Calendar Repetitions */ + + t1_tpi_write(adapter, OFFSET(0x3200), 0x00008080); /* EFLX Enable */ + t1_tpi_write(adapter, OFFSET(0x3210), 0x00000000); /* EFLX Channel Deprovision */ + t1_tpi_write(adapter, OFFSET(0x3203), 0x00000000); /* EFLX Low Limit */ + t1_tpi_write(adapter, OFFSET(0x3204), 0x00000040); /* EFLX High Limit */ + t1_tpi_write(adapter, OFFSET(0x3205), 0x000002cc); /* EFLX Almost Full */ + t1_tpi_write(adapter, OFFSET(0x3206), 0x00000199); /* EFLX Almost Empty */ + t1_tpi_write(adapter, OFFSET(0x3207), 0x00000240); /* EFLX Cut Through Threshold */ + t1_tpi_write(adapter, OFFSET(0x3202), 0x00000000); /* EFLX Indirect Register Update */ + t1_tpi_write(adapter, OFFSET(0x3210), 0x00000001); /* EFLX Channel Provision */ + t1_tpi_write(adapter, OFFSET(0x3208), 0x0000ffff); /* EFLX Undocumented */ + t1_tpi_write(adapter, OFFSET(0x320a), 0x0000ffff); /* EFLX Undocumented */ + t1_tpi_write(adapter, OFFSET(0x320c), 0x0000ffff); /* EFLX enable overflow interrupt The other bit are undocumented */ + t1_tpi_write(adapter, OFFSET(0x320e), 0x0000ffff); /* EFLX Undocumented */ + + t1_tpi_write(adapter, OFFSET(0x2200), 0x0000c000); /* IFLX Configuration - enable */ + t1_tpi_write(adapter, OFFSET(0x2201), 0x00000000); /* IFLX Channel Deprovision */ + t1_tpi_write(adapter, OFFSET(0x220e), 0x00000000); /* IFLX Low Limit */ + t1_tpi_write(adapter, OFFSET(0x220f), 0x00000100); /* IFLX High Limit */ + t1_tpi_write(adapter, OFFSET(0x2210), 0x00000c00); /* IFLX Almost Full Limit */ + t1_tpi_write(adapter, OFFSET(0x2211), 0x00000599); /* IFLX Almost Empty Limit */ + t1_tpi_write(adapter, OFFSET(0x220d), 0x00000000); /* IFLX Indirect Register Update */ + t1_tpi_write(adapter, OFFSET(0x2201), 0x00000001); /* IFLX Channel Provision */ + t1_tpi_write(adapter, OFFSET(0x2203), 0x0000ffff); /* IFLX Undocumented */ + t1_tpi_write(adapter, OFFSET(0x2205), 0x0000ffff); /* IFLX Undocumented */ + t1_tpi_write(adapter, OFFSET(0x2209), 0x0000ffff); /* IFLX Enable overflow interrupt. The other bit are undocumented */ + + t1_tpi_write(adapter, OFFSET(0x2241), 0xfffffffe); /* PL4MOS Undocumented */ + t1_tpi_write(adapter, OFFSET(0x2242), 0x0000ffff); /* PL4MOS Undocumented */ + t1_tpi_write(adapter, OFFSET(0x2243), 0x00000008); /* PL4MOS Starving Burst Size */ + t1_tpi_write(adapter, OFFSET(0x2244), 0x00000008); /* PL4MOS Hungry Burst Size */ + t1_tpi_write(adapter, OFFSET(0x2245), 0x00000008); /* PL4MOS Transfer Size */ + t1_tpi_write(adapter, OFFSET(0x2240), 0x00000005); /* PL4MOS Disable */ + + t1_tpi_write(adapter, OFFSET(0x2280), 0x00002103); /* PL4ODP Training Repeat and SOP rule */ + t1_tpi_write(adapter, OFFSET(0x2284), 0x00000000); /* PL4ODP MAX_T setting */ + + t1_tpi_write(adapter, OFFSET(0x3280), 0x00000087); /* PL4IDU Enable data forward, port state machine. Set ALLOW_NON_ZERO_OLB */ + t1_tpi_write(adapter, OFFSET(0x3282), 0x0000001f); /* PL4IDU Enable Dip4 check error interrupts */ + + t1_tpi_write(adapter, OFFSET(0x3040), 0x0c32); /* # TXXG Config */ + /* For T1 use timer based Mac flow control. */ + t1_tpi_write(adapter, OFFSET(0x304d), 0x8000); + t1_tpi_write(adapter, OFFSET(0x2040), 0x059c); /* # RXXG Config */ + t1_tpi_write(adapter, OFFSET(0x2049), 0x0001); /* # RXXG Cut Through */ + t1_tpi_write(adapter, OFFSET(0x2070), 0x0000); /* # Disable promiscuous mode */ + + /* Setup Exact Match Filter 0 to allow broadcast packets. + */ + t1_tpi_write(adapter, OFFSET(0x206e), 0x0000); /* # Disable Match Enable bit */ + t1_tpi_write(adapter, OFFSET(0x204a), 0xffff); /* # low addr */ + t1_tpi_write(adapter, OFFSET(0x204b), 0xffff); /* # mid addr */ + t1_tpi_write(adapter, OFFSET(0x204c), 0xffff); /* # high addr */ + t1_tpi_write(adapter, OFFSET(0x206e), 0x0009); /* # Enable Match Enable bit */ + + t1_tpi_write(adapter, OFFSET(0x0003), 0x0000); /* # NO SOP/ PAD_EN setup */ + t1_tpi_write(adapter, OFFSET(0x0100), 0x0ff0); /* # RXEQB disabled */ + t1_tpi_write(adapter, OFFSET(0x0101), 0x0f0f); /* # No Preemphasis */ + + return cmac; +} + +static int pm3393_mac_reset(adapter_t * adapter) +{ + u32 val; + u32 x; + u32 is_pl4_reset_finished; + u32 is_pl4_outof_lock; + u32 is_xaui_mabc_pll_locked; + u32 successful_reset; + int i; + + /* The following steps are required to properly reset + * the PM3393. This information is provided in the + * PM3393 datasheet (Issue 2: November 2002) + * section 13.1 -- Device Reset. + * + * The PM3393 has three types of components that are + * individually reset: + * + * DRESETB - Digital circuitry + * PL4_ARESETB - PL4 analog circuitry + * XAUI_ARESETB - XAUI bus analog circuitry + * + * Steps to reset PM3393 using RSTB pin: + * + * 1. Assert RSTB pin low ( write 0 ) + * 2. Wait at least 1ms to initiate a complete initialization of device. + * 3. Wait until all external clocks and REFSEL are stable. + * 4. Wait minimum of 1ms. (after external clocks and REFEL are stable) + * 5. De-assert RSTB ( write 1 ) + * 6. Wait until internal timers to expires after ~14ms. + * - Allows analog clock synthesizer(PL4CSU) to stabilize to + * selected reference frequency before allowing the digital + * portion of the device to operate. + * 7. Wait at least 200us for XAUI interface to stabilize. + * 8. Verify the PM3393 came out of reset successfully. + * Set successful reset flag if everything worked else try again + * a few more times. + */ + + successful_reset = 0; + for (i = 0; i < 3 && !successful_reset; i++) { + /* 1 */ + t1_tpi_read(adapter, A_ELMER0_GPO, &val); + val &= ~1; + t1_tpi_write(adapter, A_ELMER0_GPO, val); + + /* 2 */ + msleep(1); + + /* 3 */ + msleep(1); + + /* 4 */ + msleep(2 /*1 extra ms for safety */ ); + + /* 5 */ + val |= 1; + t1_tpi_write(adapter, A_ELMER0_GPO, val); + + /* 6 */ + msleep(15 /*1 extra ms for safety */ ); + + /* 7 */ + msleep(1); + + /* 8 */ + + /* Has PL4 analog block come out of reset correctly? */ + t1_tpi_read(adapter, OFFSET(SUNI1x10GEXP_REG_DEVICE_STATUS), &val); + is_pl4_reset_finished = (val & SUNI1x10GEXP_BITMSK_TOP_EXPIRED); + + /* TBD XXX SUNI1x10GEXP_BITMSK_TOP_PL4_IS_DOOL gets locked later in the init sequence + * figure out why? */ + + /* Have all PL4 block clocks locked? */ + x = (SUNI1x10GEXP_BITMSK_TOP_PL4_ID_DOOL + /*| SUNI1x10GEXP_BITMSK_TOP_PL4_IS_DOOL */ | + SUNI1x10GEXP_BITMSK_TOP_PL4_ID_ROOL | + SUNI1x10GEXP_BITMSK_TOP_PL4_IS_ROOL | + SUNI1x10GEXP_BITMSK_TOP_PL4_OUT_ROOL); + is_pl4_outof_lock = (val & x); + + /* ??? If this fails, might be able to software reset the XAUI part + * and try to recover... thus saving us from doing another HW reset */ + /* Has the XAUI MABC PLL circuitry stablized? */ + is_xaui_mabc_pll_locked = + (val & SUNI1x10GEXP_BITMSK_TOP_SXRA_EXPIRED); + + successful_reset = (is_pl4_reset_finished && !is_pl4_outof_lock + && is_xaui_mabc_pll_locked); + } + return successful_reset ? 0 : 1; +} + +struct gmac t1_pm3393_ops = { + STATS_TICK_SECS, + pm3393_mac_create, + pm3393_mac_reset +}; diff --git a/drivers/net/chelsio/regs.h b/drivers/net/chelsio/regs.h new file mode 100644 index 000000000000..b90e11f40d1f --- /dev/null +++ b/drivers/net/chelsio/regs.h @@ -0,0 +1,468 @@ +/***************************************************************************** + * * + * File: regs.h * + * $Revision: 1.8 $ * + * $Date: 2005/06/21 18:29:48 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis <dm@chelsio.com> * + * Tina Yang <tainay@chelsio.com> * + * Felix Marti <felix@chelsio.com> * + * Scott Bardone <sbardone@chelsio.com> * + * Kurt Ottaway <kottaway@chelsio.com> * + * Frank DiMambro <frank@chelsio.com> * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef _CXGB_REGS_H_ +#define _CXGB_REGS_H_ + +/* SGE registers */ +#define A_SG_CONTROL 0x0 + +#define S_CMDQ0_ENABLE 0 +#define V_CMDQ0_ENABLE(x) ((x) << S_CMDQ0_ENABLE) +#define F_CMDQ0_ENABLE V_CMDQ0_ENABLE(1U) + +#define S_CMDQ1_ENABLE 1 +#define V_CMDQ1_ENABLE(x) ((x) << S_CMDQ1_ENABLE) +#define F_CMDQ1_ENABLE V_CMDQ1_ENABLE(1U) + +#define S_FL0_ENABLE 2 +#define V_FL0_ENABLE(x) ((x) << S_FL0_ENABLE) +#define F_FL0_ENABLE V_FL0_ENABLE(1U) + +#define S_FL1_ENABLE 3 +#define V_FL1_ENABLE(x) ((x) << S_FL1_ENABLE) +#define F_FL1_ENABLE V_FL1_ENABLE(1U) + +#define S_CPL_ENABLE 4 +#define V_CPL_ENABLE(x) ((x) << S_CPL_ENABLE) +#define F_CPL_ENABLE V_CPL_ENABLE(1U) + +#define S_RESPONSE_QUEUE_ENABLE 5 +#define V_RESPONSE_QUEUE_ENABLE(x) ((x) << S_RESPONSE_QUEUE_ENABLE) +#define F_RESPONSE_QUEUE_ENABLE V_RESPONSE_QUEUE_ENABLE(1U) + +#define S_CMDQ_PRIORITY 6 +#define M_CMDQ_PRIORITY 0x3 +#define V_CMDQ_PRIORITY(x) ((x) << S_CMDQ_PRIORITY) +#define G_CMDQ_PRIORITY(x) (((x) >> S_CMDQ_PRIORITY) & M_CMDQ_PRIORITY) + +#define S_DISABLE_CMDQ1_GTS 9 +#define V_DISABLE_CMDQ1_GTS(x) ((x) << S_DISABLE_CMDQ1_GTS) +#define F_DISABLE_CMDQ1_GTS V_DISABLE_CMDQ1_GTS(1U) + +#define S_DISABLE_FL0_GTS 10 +#define V_DISABLE_FL0_GTS(x) ((x) << S_DISABLE_FL0_GTS) +#define F_DISABLE_FL0_GTS V_DISABLE_FL0_GTS(1U) + +#define S_DISABLE_FL1_GTS 11 +#define V_DISABLE_FL1_GTS(x) ((x) << S_DISABLE_FL1_GTS) +#define F_DISABLE_FL1_GTS V_DISABLE_FL1_GTS(1U) + +#define S_ENABLE_BIG_ENDIAN 12 +#define V_ENABLE_BIG_ENDIAN(x) ((x) << S_ENABLE_BIG_ENDIAN) +#define F_ENABLE_BIG_ENDIAN V_ENABLE_BIG_ENDIAN(1U) + +#define S_ISCSI_COALESCE 14 +#define V_ISCSI_COALESCE(x) ((x) << S_ISCSI_COALESCE) +#define F_ISCSI_COALESCE V_ISCSI_COALESCE(1U) + +#define S_RX_PKT_OFFSET 15 +#define V_RX_PKT_OFFSET(x) ((x) << S_RX_PKT_OFFSET) + +#define S_VLAN_XTRACT 18 +#define V_VLAN_XTRACT(x) ((x) << S_VLAN_XTRACT) +#define F_VLAN_XTRACT V_VLAN_XTRACT(1U) + +#define A_SG_DOORBELL 0x4 +#define A_SG_CMD0BASELWR 0x8 +#define A_SG_CMD0BASEUPR 0xc +#define A_SG_CMD1BASELWR 0x10 +#define A_SG_CMD1BASEUPR 0x14 +#define A_SG_FL0BASELWR 0x18 +#define A_SG_FL0BASEUPR 0x1c +#define A_SG_FL1BASELWR 0x20 +#define A_SG_FL1BASEUPR 0x24 +#define A_SG_CMD0SIZE 0x28 +#define A_SG_FL0SIZE 0x2c +#define A_SG_RSPSIZE 0x30 +#define A_SG_RSPBASELWR 0x34 +#define A_SG_RSPBASEUPR 0x38 +#define A_SG_FLTHRESHOLD 0x3c +#define A_SG_RSPQUEUECREDIT 0x40 +#define A_SG_SLEEPING 0x48 +#define A_SG_INTRTIMER 0x4c +#define A_SG_CMD1SIZE 0xb0 +#define A_SG_FL1SIZE 0xb4 +#define A_SG_INT_ENABLE 0xb8 + +#define S_RESPQ_EXHAUSTED 0 +#define V_RESPQ_EXHAUSTED(x) ((x) << S_RESPQ_EXHAUSTED) +#define F_RESPQ_EXHAUSTED V_RESPQ_EXHAUSTED(1U) + +#define S_RESPQ_OVERFLOW 1 +#define V_RESPQ_OVERFLOW(x) ((x) << S_RESPQ_OVERFLOW) +#define F_RESPQ_OVERFLOW V_RESPQ_OVERFLOW(1U) + +#define S_FL_EXHAUSTED 2 +#define V_FL_EXHAUSTED(x) ((x) << S_FL_EXHAUSTED) +#define F_FL_EXHAUSTED V_FL_EXHAUSTED(1U) + +#define S_PACKET_TOO_BIG 3 +#define V_PACKET_TOO_BIG(x) ((x) << S_PACKET_TOO_BIG) +#define F_PACKET_TOO_BIG V_PACKET_TOO_BIG(1U) + +#define S_PACKET_MISMATCH 4 +#define V_PACKET_MISMATCH(x) ((x) << S_PACKET_MISMATCH) +#define F_PACKET_MISMATCH V_PACKET_MISMATCH(1U) + +#define A_SG_INT_CAUSE 0xbc +#define A_SG_RESPACCUTIMER 0xc0 + +/* MC3 registers */ + +#define S_READY 1 +#define V_READY(x) ((x) << S_READY) +#define F_READY V_READY(1U) + +/* MC4 registers */ + +#define A_MC4_CFG 0x180 +#define S_MC4_SLOW 25 +#define V_MC4_SLOW(x) ((x) << S_MC4_SLOW) +#define F_MC4_SLOW V_MC4_SLOW(1U) + +/* TPI registers */ + +#define A_TPI_ADDR 0x280 +#define A_TPI_WR_DATA 0x284 +#define A_TPI_RD_DATA 0x288 +#define A_TPI_CSR 0x28c + +#define S_TPIWR 0 +#define V_TPIWR(x) ((x) << S_TPIWR) +#define F_TPIWR V_TPIWR(1U) + +#define S_TPIRDY 1 +#define V_TPIRDY(x) ((x) << S_TPIRDY) +#define F_TPIRDY V_TPIRDY(1U) + +#define A_TPI_PAR 0x29c + +#define S_TPIPAR 0 +#define M_TPIPAR 0x7f +#define V_TPIPAR(x) ((x) << S_TPIPAR) +#define G_TPIPAR(x) (((x) >> S_TPIPAR) & M_TPIPAR) + +/* TP registers */ + +#define A_TP_IN_CONFIG 0x300 + +#define S_TP_IN_CSPI_CPL 3 +#define V_TP_IN_CSPI_CPL(x) ((x) << S_TP_IN_CSPI_CPL) +#define F_TP_IN_CSPI_CPL V_TP_IN_CSPI_CPL(1U) + +#define S_TP_IN_CSPI_CHECK_IP_CSUM 5 +#define V_TP_IN_CSPI_CHECK_IP_CSUM(x) ((x) << S_TP_IN_CSPI_CHECK_IP_CSUM) +#define F_TP_IN_CSPI_CHECK_IP_CSUM V_TP_IN_CSPI_CHECK_IP_CSUM(1U) + +#define S_TP_IN_CSPI_CHECK_TCP_CSUM 6 +#define V_TP_IN_CSPI_CHECK_TCP_CSUM(x) ((x) << S_TP_IN_CSPI_CHECK_TCP_CSUM) +#define F_TP_IN_CSPI_CHECK_TCP_CSUM V_TP_IN_CSPI_CHECK_TCP_CSUM(1U) + +#define S_TP_IN_ESPI_ETHERNET 8 +#define V_TP_IN_ESPI_ETHERNET(x) ((x) << S_TP_IN_ESPI_ETHERNET) +#define F_TP_IN_ESPI_ETHERNET V_TP_IN_ESPI_ETHERNET(1U) + +#define S_TP_IN_ESPI_CHECK_IP_CSUM 12 +#define V_TP_IN_ESPI_CHECK_IP_CSUM(x) ((x) << S_TP_IN_ESPI_CHECK_IP_CSUM) +#define F_TP_IN_ESPI_CHECK_IP_CSUM V_TP_IN_ESPI_CHECK_IP_CSUM(1U) + +#define S_TP_IN_ESPI_CHECK_TCP_CSUM 13 +#define V_TP_IN_ESPI_CHECK_TCP_CSUM(x) ((x) << S_TP_IN_ESPI_CHECK_TCP_CSUM) +#define F_TP_IN_ESPI_CHECK_TCP_CSUM V_TP_IN_ESPI_CHECK_TCP_CSUM(1U) + +#define S_OFFLOAD_DISABLE 14 +#define V_OFFLOAD_DISABLE(x) ((x) << S_OFFLOAD_DISABLE) +#define F_OFFLOAD_DISABLE V_OFFLOAD_DISABLE(1U) + +#define A_TP_OUT_CONFIG 0x304 + +#define S_TP_OUT_CSPI_CPL 2 +#define V_TP_OUT_CSPI_CPL(x) ((x) << S_TP_OUT_CSPI_CPL) +#define F_TP_OUT_CSPI_CPL V_TP_OUT_CSPI_CPL(1U) + +#define S_TP_OUT_ESPI_ETHERNET 6 +#define V_TP_OUT_ESPI_ETHERNET(x) ((x) << S_TP_OUT_ESPI_ETHERNET) +#define F_TP_OUT_ESPI_ETHERNET V_TP_OUT_ESPI_ETHERNET(1U) + +#define S_TP_OUT_ESPI_GENERATE_IP_CSUM 10 +#define V_TP_OUT_ESPI_GENERATE_IP_CSUM(x) ((x) << S_TP_OUT_ESPI_GENERATE_IP_CSUM) +#define F_TP_OUT_ESPI_GENERATE_IP_CSUM V_TP_OUT_ESPI_GENERATE_IP_CSUM(1U) + +#define S_TP_OUT_ESPI_GENERATE_TCP_CSUM 11 +#define V_TP_OUT_ESPI_GENERATE_TCP_CSUM(x) ((x) << S_TP_OUT_ESPI_GENERATE_TCP_CSUM) +#define F_TP_OUT_ESPI_GENERATE_TCP_CSUM V_TP_OUT_ESPI_GENERATE_TCP_CSUM(1U) + +#define A_TP_GLOBAL_CONFIG 0x308 + +#define S_IP_TTL 0 +#define M_IP_TTL 0xff +#define V_IP_TTL(x) ((x) << S_IP_TTL) + +#define S_TCP_CSUM 11 +#define V_TCP_CSUM(x) ((x) << S_TCP_CSUM) +#define F_TCP_CSUM V_TCP_CSUM(1U) + +#define S_UDP_CSUM 12 +#define V_UDP_CSUM(x) ((x) << S_UDP_CSUM) +#define F_UDP_CSUM V_UDP_CSUM(1U) + +#define S_IP_CSUM 13 +#define V_IP_CSUM(x) ((x) << S_IP_CSUM) +#define F_IP_CSUM V_IP_CSUM(1U) + +#define S_PATH_MTU 15 +#define V_PATH_MTU(x) ((x) << S_PATH_MTU) +#define F_PATH_MTU V_PATH_MTU(1U) + +#define S_5TUPLE_LOOKUP 17 +#define V_5TUPLE_LOOKUP(x) ((x) << S_5TUPLE_LOOKUP) + +#define S_SYN_COOKIE_PARAMETER 26 +#define V_SYN_COOKIE_PARAMETER(x) ((x) << S_SYN_COOKIE_PARAMETER) + +#define A_TP_PC_CONFIG 0x348 +#define S_DIS_TX_FILL_WIN_PUSH 12 +#define V_DIS_TX_FILL_WIN_PUSH(x) ((x) << S_DIS_TX_FILL_WIN_PUSH) +#define F_DIS_TX_FILL_WIN_PUSH V_DIS_TX_FILL_WIN_PUSH(1U) + +#define S_TP_PC_REV 30 +#define M_TP_PC_REV 0x3 +#define G_TP_PC_REV(x) (((x) >> S_TP_PC_REV) & M_TP_PC_REV) +#define A_TP_RESET 0x44c +#define S_TP_RESET 0 +#define V_TP_RESET(x) ((x) << S_TP_RESET) +#define F_TP_RESET V_TP_RESET(1U) + +#define A_TP_INT_ENABLE 0x470 +#define A_TP_INT_CAUSE 0x474 +#define A_TP_TX_DROP_CONFIG 0x4b8 + +#define S_ENABLE_TX_DROP 31 +#define V_ENABLE_TX_DROP(x) ((x) << S_ENABLE_TX_DROP) +#define F_ENABLE_TX_DROP V_ENABLE_TX_DROP(1U) + +#define S_ENABLE_TX_ERROR 30 +#define V_ENABLE_TX_ERROR(x) ((x) << S_ENABLE_TX_ERROR) +#define F_ENABLE_TX_ERROR V_ENABLE_TX_ERROR(1U) + +#define S_DROP_TICKS_CNT 4 +#define V_DROP_TICKS_CNT(x) ((x) << S_DROP_TICKS_CNT) + +#define S_NUM_PKTS_DROPPED 0 +#define V_NUM_PKTS_DROPPED(x) ((x) << S_NUM_PKTS_DROPPED) + +/* CSPI registers */ + +#define S_DIP4ERR 0 +#define V_DIP4ERR(x) ((x) << S_DIP4ERR) +#define F_DIP4ERR V_DIP4ERR(1U) + +#define S_RXDROP 1 +#define V_RXDROP(x) ((x) << S_RXDROP) +#define F_RXDROP V_RXDROP(1U) + +#define S_TXDROP 2 +#define V_TXDROP(x) ((x) << S_TXDROP) +#define F_TXDROP V_TXDROP(1U) + +#define S_RXOVERFLOW 3 +#define V_RXOVERFLOW(x) ((x) << S_RXOVERFLOW) +#define F_RXOVERFLOW V_RXOVERFLOW(1U) + +#define S_RAMPARITYERR 4 +#define V_RAMPARITYERR(x) ((x) << S_RAMPARITYERR) +#define F_RAMPARITYERR V_RAMPARITYERR(1U) + +/* ESPI registers */ + +#define A_ESPI_SCH_TOKEN0 0x880 +#define A_ESPI_SCH_TOKEN1 0x884 +#define A_ESPI_SCH_TOKEN2 0x888 +#define A_ESPI_SCH_TOKEN3 0x88c +#define A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK 0x890 +#define A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK 0x894 +#define A_ESPI_CALENDAR_LENGTH 0x898 +#define A_PORT_CONFIG 0x89c + +#define S_RX_NPORTS 0 +#define V_RX_NPORTS(x) ((x) << S_RX_NPORTS) + +#define S_TX_NPORTS 8 +#define V_TX_NPORTS(x) ((x) << S_TX_NPORTS) + +#define A_ESPI_FIFO_STATUS_ENABLE 0x8a0 + +#define S_RXSTATUSENABLE 0 +#define V_RXSTATUSENABLE(x) ((x) << S_RXSTATUSENABLE) +#define F_RXSTATUSENABLE V_RXSTATUSENABLE(1U) + +#define S_INTEL1010MODE 4 +#define V_INTEL1010MODE(x) ((x) << S_INTEL1010MODE) +#define F_INTEL1010MODE V_INTEL1010MODE(1U) + +#define A_ESPI_MAXBURST1_MAXBURST2 0x8a8 +#define A_ESPI_TRAIN 0x8ac +#define A_ESPI_INTR_STATUS 0x8c8 + +#define S_DIP2PARITYERR 5 +#define V_DIP2PARITYERR(x) ((x) << S_DIP2PARITYERR) +#define F_DIP2PARITYERR V_DIP2PARITYERR(1U) + +#define A_ESPI_INTR_ENABLE 0x8cc +#define A_RX_DROP_THRESHOLD 0x8d0 +#define A_ESPI_RX_RESET 0x8ec +#define A_ESPI_MISC_CONTROL 0x8f0 + +#define S_OUT_OF_SYNC_COUNT 0 +#define V_OUT_OF_SYNC_COUNT(x) ((x) << S_OUT_OF_SYNC_COUNT) + +#define S_DIP2_PARITY_ERR_THRES 5 +#define V_DIP2_PARITY_ERR_THRES(x) ((x) << S_DIP2_PARITY_ERR_THRES) + +#define S_DIP4_THRES 9 +#define V_DIP4_THRES(x) ((x) << S_DIP4_THRES) + +#define S_MONITORED_PORT_NUM 25 +#define V_MONITORED_PORT_NUM(x) ((x) << S_MONITORED_PORT_NUM) + +#define S_MONITORED_DIRECTION 27 +#define V_MONITORED_DIRECTION(x) ((x) << S_MONITORED_DIRECTION) +#define F_MONITORED_DIRECTION V_MONITORED_DIRECTION(1U) + +#define S_MONITORED_INTERFACE 28 +#define V_MONITORED_INTERFACE(x) ((x) << S_MONITORED_INTERFACE) +#define F_MONITORED_INTERFACE V_MONITORED_INTERFACE(1U) + +#define A_ESPI_DIP2_ERR_COUNT 0x8f4 +#define A_ESPI_CMD_ADDR 0x8f8 + +#define S_WRITE_DATA 0 +#define V_WRITE_DATA(x) ((x) << S_WRITE_DATA) + +#define S_REGISTER_OFFSET 8 +#define V_REGISTER_OFFSET(x) ((x) << S_REGISTER_OFFSET) + +#define S_CHANNEL_ADDR 12 +#define V_CHANNEL_ADDR(x) ((x) << S_CHANNEL_ADDR) + +#define S_MODULE_ADDR 16 +#define V_MODULE_ADDR(x) ((x) << S_MODULE_ADDR) + +#define S_BUNDLE_ADDR 20 +#define V_BUNDLE_ADDR(x) ((x) << S_BUNDLE_ADDR) + +#define S_SPI4_COMMAND 24 +#define V_SPI4_COMMAND(x) ((x) << S_SPI4_COMMAND) + +#define A_ESPI_GOSTAT 0x8fc +#define S_ESPI_CMD_BUSY 8 +#define V_ESPI_CMD_BUSY(x) ((x) << S_ESPI_CMD_BUSY) +#define F_ESPI_CMD_BUSY V_ESPI_CMD_BUSY(1U) + +/* PL registers */ + +#define A_PL_ENABLE 0xa00 + +#define S_PL_INTR_SGE_ERR 0 +#define V_PL_INTR_SGE_ERR(x) ((x) << S_PL_INTR_SGE_ERR) +#define F_PL_INTR_SGE_ERR V_PL_INTR_SGE_ERR(1U) + +#define S_PL_INTR_SGE_DATA 1 +#define V_PL_INTR_SGE_DATA(x) ((x) << S_PL_INTR_SGE_DATA) +#define F_PL_INTR_SGE_DATA V_PL_INTR_SGE_DATA(1U) + +#define S_PL_INTR_TP 6 +#define V_PL_INTR_TP(x) ((x) << S_PL_INTR_TP) +#define F_PL_INTR_TP V_PL_INTR_TP(1U) + +#define S_PL_INTR_ESPI 8 +#define V_PL_INTR_ESPI(x) ((x) << S_PL_INTR_ESPI) +#define F_PL_INTR_ESPI V_PL_INTR_ESPI(1U) + +#define S_PL_INTR_PCIX 10 +#define V_PL_INTR_PCIX(x) ((x) << S_PL_INTR_PCIX) +#define F_PL_INTR_PCIX V_PL_INTR_PCIX(1U) + +#define S_PL_INTR_EXT 11 +#define V_PL_INTR_EXT(x) ((x) << S_PL_INTR_EXT) +#define F_PL_INTR_EXT V_PL_INTR_EXT(1U) + +#define A_PL_CAUSE 0xa04 + +/* MC5 registers */ + +#define A_MC5_CONFIG 0xc04 + +#define S_TCAM_RESET 1 +#define V_TCAM_RESET(x) ((x) << S_TCAM_RESET) +#define F_TCAM_RESET V_TCAM_RESET(1U) + +#define S_M_BUS_ENABLE 5 +#define V_M_BUS_ENABLE(x) ((x) << S_M_BUS_ENABLE) +#define F_M_BUS_ENABLE V_M_BUS_ENABLE(1U) + +/* PCICFG registers */ + +#define A_PCICFG_PM_CSR 0x44 +#define A_PCICFG_VPD_ADDR 0x4a + +#define S_VPD_OP_FLAG 15 +#define V_VPD_OP_FLAG(x) ((x) << S_VPD_OP_FLAG) +#define F_VPD_OP_FLAG V_VPD_OP_FLAG(1U) + +#define A_PCICFG_VPD_DATA 0x4c + +#define A_PCICFG_INTR_ENABLE 0xf4 +#define A_PCICFG_INTR_CAUSE 0xf8 + +#define A_PCICFG_MODE 0xfc + +#define S_PCI_MODE_64BIT 0 +#define V_PCI_MODE_64BIT(x) ((x) << S_PCI_MODE_64BIT) +#define F_PCI_MODE_64BIT V_PCI_MODE_64BIT(1U) + +#define S_PCI_MODE_PCIX 5 +#define V_PCI_MODE_PCIX(x) ((x) << S_PCI_MODE_PCIX) +#define F_PCI_MODE_PCIX V_PCI_MODE_PCIX(1U) + +#define S_PCI_MODE_CLK 6 +#define M_PCI_MODE_CLK 0x3 +#define G_PCI_MODE_CLK(x) (((x) >> S_PCI_MODE_CLK) & M_PCI_MODE_CLK) + +#endif /* _CXGB_REGS_H_ */ diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c new file mode 100644 index 000000000000..53b41d99b00b --- /dev/null +++ b/drivers/net/chelsio/sge.c @@ -0,0 +1,1684 @@ +/***************************************************************************** + * * + * File: sge.c * + * $Revision: 1.26 $ * + * $Date: 2005/06/21 18:29:48 $ * + * Description: * + * DMA engine. * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis <dm@chelsio.com> * + * Tina Yang <tainay@chelsio.com> * + * Felix Marti <felix@chelsio.com> * + * Scott Bardone <sbardone@chelsio.com> * + * Kurt Ottaway <kottaway@chelsio.com> * + * Frank DiMambro <frank@chelsio.com> * + * * + * History: * + * * + ****************************************************************************/ + +#include "common.h" + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/if_vlan.h> +#include <linux/skbuff.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/ip.h> +#include <linux/in.h> +#include <linux/if_arp.h> + +#include "cpl5_cmd.h" +#include "sge.h" +#include "regs.h" +#include "espi.h" + + +#ifdef NETIF_F_TSO +#include <linux/tcp.h> +#endif + +#define SGE_CMDQ_N 2 +#define SGE_FREELQ_N 2 +#define SGE_CMDQ0_E_N 1024 +#define SGE_CMDQ1_E_N 128 +#define SGE_FREEL_SIZE 4096 +#define SGE_JUMBO_FREEL_SIZE 512 +#define SGE_FREEL_REFILL_THRESH 16 +#define SGE_RESPQ_E_N 1024 +#define SGE_INTRTIMER_NRES 1000 +#define SGE_RX_COPY_THRES 256 +#define SGE_RX_SM_BUF_SIZE 1536 + +# define SGE_RX_DROP_THRES 2 + +#define SGE_RESPQ_REPLENISH_THRES (SGE_RESPQ_E_N / 4) + +/* + * Period of the TX buffer reclaim timer. This timer does not need to run + * frequently as TX buffers are usually reclaimed by new TX packets. + */ +#define TX_RECLAIM_PERIOD (HZ / 4) + +#ifndef NET_IP_ALIGN +# define NET_IP_ALIGN 2 +#endif + +#define M_CMD_LEN 0x7fffffff +#define V_CMD_LEN(v) (v) +#define G_CMD_LEN(v) ((v) & M_CMD_LEN) +#define V_CMD_GEN1(v) ((v) << 31) +#define V_CMD_GEN2(v) (v) +#define F_CMD_DATAVALID (1 << 1) +#define F_CMD_SOP (1 << 2) +#define V_CMD_EOP(v) ((v) << 3) + +/* + * Command queue, receive buffer list, and response queue descriptors. + */ +#if defined(__BIG_ENDIAN_BITFIELD) +struct cmdQ_e { + u32 addr_lo; + u32 len_gen; + u32 flags; + u32 addr_hi; +}; + +struct freelQ_e { + u32 addr_lo; + u32 len_gen; + u32 gen2; + u32 addr_hi; +}; + +struct respQ_e { + u32 Qsleeping : 4; + u32 Cmdq1CreditReturn : 5; + u32 Cmdq1DmaComplete : 5; + u32 Cmdq0CreditReturn : 5; + u32 Cmdq0DmaComplete : 5; + u32 FreelistQid : 2; + u32 CreditValid : 1; + u32 DataValid : 1; + u32 Offload : 1; + u32 Eop : 1; + u32 Sop : 1; + u32 GenerationBit : 1; + u32 BufferLength; +}; +#elif defined(__LITTLE_ENDIAN_BITFIELD) +struct cmdQ_e { + u32 len_gen; + u32 addr_lo; + u32 addr_hi; + u32 flags; +}; + +struct freelQ_e { + u32 len_gen; + u32 addr_lo; + u32 addr_hi; + u32 gen2; +}; + +struct respQ_e { + u32 BufferLength; + u32 GenerationBit : 1; + u32 Sop : 1; + u32 Eop : 1; + u32 Offload : 1; + u32 DataValid : 1; + u32 CreditValid : 1; + u32 FreelistQid : 2; + u32 Cmdq0DmaComplete : 5; + u32 Cmdq0CreditReturn : 5; + u32 Cmdq1DmaComplete : 5; + u32 Cmdq1CreditReturn : 5; + u32 Qsleeping : 4; +} ; +#endif + +/* + * SW Context Command and Freelist Queue Descriptors + */ +struct cmdQ_ce { + struct sk_buff *skb; + DECLARE_PCI_UNMAP_ADDR(dma_addr); + DECLARE_PCI_UNMAP_LEN(dma_len); +}; + +struct freelQ_ce { + struct sk_buff *skb; + DECLARE_PCI_UNMAP_ADDR(dma_addr); + DECLARE_PCI_UNMAP_LEN(dma_len); +}; + +/* + * SW command, freelist and response rings + */ +struct cmdQ { + unsigned long status; /* HW DMA fetch status */ + unsigned int in_use; /* # of in-use command descriptors */ + unsigned int size; /* # of descriptors */ + unsigned int processed; /* total # of descs HW has processed */ + unsigned int cleaned; /* total # of descs SW has reclaimed */ + unsigned int stop_thres; /* SW TX queue suspend threshold */ + u16 pidx; /* producer index (SW) */ + u16 cidx; /* consumer index (HW) */ + u8 genbit; /* current generation (=valid) bit */ + u8 sop; /* is next entry start of packet? */ + struct cmdQ_e *entries; /* HW command descriptor Q */ + struct cmdQ_ce *centries; /* SW command context descriptor Q */ + spinlock_t lock; /* Lock to protect cmdQ enqueuing */ + dma_addr_t dma_addr; /* DMA addr HW command descriptor Q */ +}; + +struct freelQ { + unsigned int credits; /* # of available RX buffers */ + unsigned int size; /* free list capacity */ + u16 pidx; /* producer index (SW) */ + u16 cidx; /* consumer index (HW) */ + u16 rx_buffer_size; /* Buffer size on this free list */ + u16 dma_offset; /* DMA offset to align IP headers */ + u16 recycleq_idx; /* skb recycle q to use */ + u8 genbit; /* current generation (=valid) bit */ + struct freelQ_e *entries; /* HW freelist descriptor Q */ + struct freelQ_ce *centries; /* SW freelist context descriptor Q */ + dma_addr_t dma_addr; /* DMA addr HW freelist descriptor Q */ +}; + +struct respQ { + unsigned int credits; /* credits to be returned to SGE */ + unsigned int size; /* # of response Q descriptors */ + u16 cidx; /* consumer index (SW) */ + u8 genbit; /* current generation(=valid) bit */ + struct respQ_e *entries; /* HW response descriptor Q */ + dma_addr_t dma_addr; /* DMA addr HW response descriptor Q */ +}; + +/* Bit flags for cmdQ.status */ +enum { + CMDQ_STAT_RUNNING = 1, /* fetch engine is running */ + CMDQ_STAT_LAST_PKT_DB = 2 /* last packet rung the doorbell */ +}; + +/* + * Main SGE data structure + * + * Interrupts are handled by a single CPU and it is likely that on a MP system + * the application is migrated to another CPU. In that scenario, we try to + * seperate the RX(in irq context) and TX state in order to decrease memory + * contention. + */ +struct sge { + struct adapter *adapter; /* adapter backpointer */ + struct net_device *netdev; /* netdevice backpointer */ + struct freelQ freelQ[SGE_FREELQ_N]; /* buffer free lists */ + struct respQ respQ; /* response Q */ + unsigned long stopped_tx_queues; /* bitmap of suspended Tx queues */ + unsigned int rx_pkt_pad; /* RX padding for L2 packets */ + unsigned int jumbo_fl; /* jumbo freelist Q index */ + unsigned int intrtimer_nres; /* no-resource interrupt timer */ + unsigned int fixed_intrtimer;/* non-adaptive interrupt timer */ + struct timer_list tx_reclaim_timer; /* reclaims TX buffers */ + struct timer_list espibug_timer; + unsigned int espibug_timeout; + struct sk_buff *espibug_skb; + u32 sge_control; /* shadow value of sge control reg */ + struct sge_intr_counts stats; + struct sge_port_stats port_stats[MAX_NPORTS]; + struct cmdQ cmdQ[SGE_CMDQ_N] ____cacheline_aligned_in_smp; +}; + +/* + * PIO to indicate that memory mapped Q contains valid descriptor(s). + */ +static inline void doorbell_pio(struct adapter *adapter, u32 val) +{ + wmb(); + writel(val, adapter->regs + A_SG_DOORBELL); +} + +/* + * Frees all RX buffers on the freelist Q. The caller must make sure that + * the SGE is turned off before calling this function. + */ +static void free_freelQ_buffers(struct pci_dev *pdev, struct freelQ *q) +{ + unsigned int cidx = q->cidx; + + while (q->credits--) { + struct freelQ_ce *ce = &q->centries[cidx]; + + pci_unmap_single(pdev, pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), + PCI_DMA_FROMDEVICE); + dev_kfree_skb(ce->skb); + ce->skb = NULL; + if (++cidx == q->size) + cidx = 0; + } +} + +/* + * Free RX free list and response queue resources. + */ +static void free_rx_resources(struct sge *sge) +{ + struct pci_dev *pdev = sge->adapter->pdev; + unsigned int size, i; + + if (sge->respQ.entries) { + size = sizeof(struct respQ_e) * sge->respQ.size; + pci_free_consistent(pdev, size, sge->respQ.entries, + sge->respQ.dma_addr); + } + + for (i = 0; i < SGE_FREELQ_N; i++) { + struct freelQ *q = &sge->freelQ[i]; + + if (q->centries) { + free_freelQ_buffers(pdev, q); + kfree(q->centries); + } + if (q->entries) { + size = sizeof(struct freelQ_e) * q->size; + pci_free_consistent(pdev, size, q->entries, + q->dma_addr); + } + } +} + +/* + * Allocates basic RX resources, consisting of memory mapped freelist Qs and a + * response queue. + */ +static int alloc_rx_resources(struct sge *sge, struct sge_params *p) +{ + struct pci_dev *pdev = sge->adapter->pdev; + unsigned int size, i; + + for (i = 0; i < SGE_FREELQ_N; i++) { + struct freelQ *q = &sge->freelQ[i]; + + q->genbit = 1; + q->size = p->freelQ_size[i]; + q->dma_offset = sge->rx_pkt_pad ? 0 : NET_IP_ALIGN; + size = sizeof(struct freelQ_e) * q->size; + q->entries = (struct freelQ_e *) + pci_alloc_consistent(pdev, size, &q->dma_addr); + if (!q->entries) + goto err_no_mem; + memset(q->entries, 0, size); + size = sizeof(struct freelQ_ce) * q->size; + q->centries = kmalloc(size, GFP_KERNEL); + if (!q->centries) + goto err_no_mem; + memset(q->centries, 0, size); + } + + /* + * Calculate the buffer sizes for the two free lists. FL0 accommodates + * regular sized Ethernet frames, FL1 is sized not to exceed 16K, + * including all the sk_buff overhead. + * + * Note: For T2 FL0 and FL1 are reversed. + */ + sge->freelQ[!sge->jumbo_fl].rx_buffer_size = SGE_RX_SM_BUF_SIZE + + sizeof(struct cpl_rx_data) + + sge->freelQ[!sge->jumbo_fl].dma_offset; + sge->freelQ[sge->jumbo_fl].rx_buffer_size = (16 * 1024) - + SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); + + /* + * Setup which skb recycle Q should be used when recycling buffers from + * each free list. + */ + sge->freelQ[!sge->jumbo_fl].recycleq_idx = 0; + sge->freelQ[sge->jumbo_fl].recycleq_idx = 1; + + sge->respQ.genbit = 1; + sge->respQ.size = SGE_RESPQ_E_N; + sge->respQ.credits = 0; + size = sizeof(struct respQ_e) * sge->respQ.size; + sge->respQ.entries = (struct respQ_e *) + pci_alloc_consistent(pdev, size, &sge->respQ.dma_addr); + if (!sge->respQ.entries) + goto err_no_mem; + memset(sge->respQ.entries, 0, size); + return 0; + +err_no_mem: + free_rx_resources(sge); + return -ENOMEM; +} + +/* + * Reclaims n TX descriptors and frees the buffers associated with them. + */ +static void free_cmdQ_buffers(struct sge *sge, struct cmdQ *q, unsigned int n) +{ + struct cmdQ_ce *ce; + struct pci_dev *pdev = sge->adapter->pdev; + unsigned int cidx = q->cidx; + + q->in_use -= n; + ce = &q->centries[cidx]; + while (n--) { + if (q->sop) + pci_unmap_single(pdev, pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), + PCI_DMA_TODEVICE); + else + pci_unmap_page(pdev, pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), + PCI_DMA_TODEVICE); + q->sop = 0; + if (ce->skb) { + dev_kfree_skb(ce->skb); + q->sop = 1; + } + ce++; + if (++cidx == q->size) { + cidx = 0; + ce = q->centries; + } + } + q->cidx = cidx; +} + +/* + * Free TX resources. + * + * Assumes that SGE is stopped and all interrupts are disabled. + */ +static void free_tx_resources(struct sge *sge) +{ + struct pci_dev *pdev = sge->adapter->pdev; + unsigned int size, i; + + for (i = 0; i < SGE_CMDQ_N; i++) { + struct cmdQ *q = &sge->cmdQ[i]; + + if (q->centries) { + if (q->in_use) + free_cmdQ_buffers(sge, q, q->in_use); + kfree(q->centries); + } + if (q->entries) { + size = sizeof(struct cmdQ_e) * q->size; + pci_free_consistent(pdev, size, q->entries, + q->dma_addr); + } + } +} + +/* + * Allocates basic TX resources, consisting of memory mapped command Qs. + */ +static int alloc_tx_resources(struct sge *sge, struct sge_params *p) +{ + struct pci_dev *pdev = sge->adapter->pdev; + unsigned int size, i; + + for (i = 0; i < SGE_CMDQ_N; i++) { + struct cmdQ *q = &sge->cmdQ[i]; + + q->genbit = 1; + q->sop = 1; + q->size = p->cmdQ_size[i]; + q->in_use = 0; + q->status = 0; + q->processed = q->cleaned = 0; + q->stop_thres = 0; + spin_lock_init(&q->lock); + size = sizeof(struct cmdQ_e) * q->size; + q->entries = (struct cmdQ_e *) + pci_alloc_consistent(pdev, size, &q->dma_addr); + if (!q->entries) + goto err_no_mem; + memset(q->entries, 0, size); + size = sizeof(struct cmdQ_ce) * q->size; + q->centries = kmalloc(size, GFP_KERNEL); + if (!q->centries) + goto err_no_mem; + memset(q->centries, 0, size); + } + + /* + * CommandQ 0 handles Ethernet and TOE packets, while queue 1 is TOE + * only. For queue 0 set the stop threshold so we can handle one more + * packet from each port, plus reserve an additional 24 entries for + * Ethernet packets only. Queue 1 never suspends nor do we reserve + * space for Ethernet packets. + */ + sge->cmdQ[0].stop_thres = sge->adapter->params.nports * + (MAX_SKB_FRAGS + 1); + return 0; + +err_no_mem: + free_tx_resources(sge); + return -ENOMEM; +} + +static inline void setup_ring_params(struct adapter *adapter, u64 addr, + u32 size, int base_reg_lo, + int base_reg_hi, int size_reg) +{ + writel((u32)addr, adapter->regs + base_reg_lo); + writel(addr >> 32, adapter->regs + base_reg_hi); + writel(size, adapter->regs + size_reg); +} + +/* + * Enable/disable VLAN acceleration. + */ +void t1_set_vlan_accel(struct adapter *adapter, int on_off) +{ + struct sge *sge = adapter->sge; + + sge->sge_control &= ~F_VLAN_XTRACT; + if (on_off) + sge->sge_control |= F_VLAN_XTRACT; + if (adapter->open_device_map) { + writel(sge->sge_control, adapter->regs + A_SG_CONTROL); + readl(adapter->regs + A_SG_CONTROL); /* flush */ + } +} + +/* + * Programs the various SGE registers. However, the engine is not yet enabled, + * but sge->sge_control is setup and ready to go. + */ +static void configure_sge(struct sge *sge, struct sge_params *p) +{ + struct adapter *ap = sge->adapter; + + writel(0, ap->regs + A_SG_CONTROL); + setup_ring_params(ap, sge->cmdQ[0].dma_addr, sge->cmdQ[0].size, + A_SG_CMD0BASELWR, A_SG_CMD0BASEUPR, A_SG_CMD0SIZE); + setup_ring_params(ap, sge->cmdQ[1].dma_addr, sge->cmdQ[1].size, + A_SG_CMD1BASELWR, A_SG_CMD1BASEUPR, A_SG_CMD1SIZE); + setup_ring_params(ap, sge->freelQ[0].dma_addr, + sge->freelQ[0].size, A_SG_FL0BASELWR, + A_SG_FL0BASEUPR, A_SG_FL0SIZE); + setup_ring_params(ap, sge->freelQ[1].dma_addr, + sge->freelQ[1].size, A_SG_FL1BASELWR, + A_SG_FL1BASEUPR, A_SG_FL1SIZE); + + /* The threshold comparison uses <. */ + writel(SGE_RX_SM_BUF_SIZE + 1, ap->regs + A_SG_FLTHRESHOLD); + + setup_ring_params(ap, sge->respQ.dma_addr, sge->respQ.size, + A_SG_RSPBASELWR, A_SG_RSPBASEUPR, A_SG_RSPSIZE); + writel((u32)sge->respQ.size - 1, ap->regs + A_SG_RSPQUEUECREDIT); + + sge->sge_control = F_CMDQ0_ENABLE | F_CMDQ1_ENABLE | F_FL0_ENABLE | + F_FL1_ENABLE | F_CPL_ENABLE | F_RESPONSE_QUEUE_ENABLE | + V_CMDQ_PRIORITY(2) | F_DISABLE_CMDQ1_GTS | F_ISCSI_COALESCE | + F_DISABLE_FL0_GTS | F_DISABLE_FL1_GTS | + V_RX_PKT_OFFSET(sge->rx_pkt_pad); + +#if defined(__BIG_ENDIAN_BITFIELD) + sge->sge_control |= F_ENABLE_BIG_ENDIAN; +#endif + + /* Initialize no-resource timer */ + sge->intrtimer_nres = SGE_INTRTIMER_NRES * core_ticks_per_usec(ap); + + t1_sge_set_coalesce_params(sge, p); +} + +/* + * Return the payload capacity of the jumbo free-list buffers. + */ +static inline unsigned int jumbo_payload_capacity(const struct sge *sge) +{ + return sge->freelQ[sge->jumbo_fl].rx_buffer_size - + sge->freelQ[sge->jumbo_fl].dma_offset - + sizeof(struct cpl_rx_data); +} + +/* + * Frees all SGE related resources and the sge structure itself + */ +void t1_sge_destroy(struct sge *sge) +{ + if (sge->espibug_skb) + kfree_skb(sge->espibug_skb); + + free_tx_resources(sge); + free_rx_resources(sge); + kfree(sge); +} + +/* + * Allocates new RX buffers on the freelist Q (and tracks them on the freelist + * context Q) until the Q is full or alloc_skb fails. + * + * It is possible that the generation bits already match, indicating that the + * buffer is already valid and nothing needs to be done. This happens when we + * copied a received buffer into a new sk_buff during the interrupt processing. + * + * If the SGE doesn't automatically align packets properly (!sge->rx_pkt_pad), + * we specify a RX_OFFSET in order to make sure that the IP header is 4B + * aligned. + */ +static void refill_free_list(struct sge *sge, struct freelQ *q) +{ + struct pci_dev *pdev = sge->adapter->pdev; + struct freelQ_ce *ce = &q->centries[q->pidx]; + struct freelQ_e *e = &q->entries[q->pidx]; + unsigned int dma_len = q->rx_buffer_size - q->dma_offset; + + + while (q->credits < q->size) { + struct sk_buff *skb; + dma_addr_t mapping; + + skb = alloc_skb(q->rx_buffer_size, GFP_ATOMIC); + if (!skb) + break; + + skb_reserve(skb, q->dma_offset); + mapping = pci_map_single(pdev, skb->data, dma_len, + PCI_DMA_FROMDEVICE); + ce->skb = skb; + pci_unmap_addr_set(ce, dma_addr, mapping); + pci_unmap_len_set(ce, dma_len, dma_len); + e->addr_lo = (u32)mapping; + e->addr_hi = (u64)mapping >> 32; + e->len_gen = V_CMD_LEN(dma_len) | V_CMD_GEN1(q->genbit); + wmb(); + e->gen2 = V_CMD_GEN2(q->genbit); + + e++; + ce++; + if (++q->pidx == q->size) { + q->pidx = 0; + q->genbit ^= 1; + ce = q->centries; + e = q->entries; + } + q->credits++; + } + +} + +/* + * Calls refill_free_list for both free lists. If we cannot fill at least 1/4 + * of both rings, we go into 'few interrupt mode' in order to give the system + * time to free up resources. + */ +static void freelQs_empty(struct sge *sge) +{ + struct adapter *adapter = sge->adapter; + u32 irq_reg = readl(adapter->regs + A_SG_INT_ENABLE); + u32 irqholdoff_reg; + + refill_free_list(sge, &sge->freelQ[0]); + refill_free_list(sge, &sge->freelQ[1]); + + if (sge->freelQ[0].credits > (sge->freelQ[0].size >> 2) && + sge->freelQ[1].credits > (sge->freelQ[1].size >> 2)) { + irq_reg |= F_FL_EXHAUSTED; + irqholdoff_reg = sge->fixed_intrtimer; + } else { + /* Clear the F_FL_EXHAUSTED interrupts for now */ + irq_reg &= ~F_FL_EXHAUSTED; + irqholdoff_reg = sge->intrtimer_nres; + } + writel(irqholdoff_reg, adapter->regs + A_SG_INTRTIMER); + writel(irq_reg, adapter->regs + A_SG_INT_ENABLE); + + /* We reenable the Qs to force a freelist GTS interrupt later */ + doorbell_pio(adapter, F_FL0_ENABLE | F_FL1_ENABLE); +} + +#define SGE_PL_INTR_MASK (F_PL_INTR_SGE_ERR | F_PL_INTR_SGE_DATA) +#define SGE_INT_FATAL (F_RESPQ_OVERFLOW | F_PACKET_TOO_BIG | F_PACKET_MISMATCH) +#define SGE_INT_ENABLE (F_RESPQ_EXHAUSTED | F_RESPQ_OVERFLOW | \ + F_FL_EXHAUSTED | F_PACKET_TOO_BIG | F_PACKET_MISMATCH) + +/* + * Disable SGE Interrupts + */ +void t1_sge_intr_disable(struct sge *sge) +{ + u32 val = readl(sge->adapter->regs + A_PL_ENABLE); + + writel(val & ~SGE_PL_INTR_MASK, sge->adapter->regs + A_PL_ENABLE); + writel(0, sge->adapter->regs + A_SG_INT_ENABLE); +} + +/* + * Enable SGE interrupts. + */ +void t1_sge_intr_enable(struct sge *sge) +{ + u32 en = SGE_INT_ENABLE; + u32 val = readl(sge->adapter->regs + A_PL_ENABLE); + + if (sge->adapter->flags & TSO_CAPABLE) + en &= ~F_PACKET_TOO_BIG; + writel(en, sge->adapter->regs + A_SG_INT_ENABLE); + writel(val | SGE_PL_INTR_MASK, sge->adapter->regs + A_PL_ENABLE); +} + +/* + * Clear SGE interrupts. + */ +void t1_sge_intr_clear(struct sge *sge) +{ + writel(SGE_PL_INTR_MASK, sge->adapter->regs + A_PL_CAUSE); + writel(0xffffffff, sge->adapter->regs + A_SG_INT_CAUSE); +} + +/* + * SGE 'Error' interrupt handler + */ +int t1_sge_intr_error_handler(struct sge *sge) +{ + struct adapter *adapter = sge->adapter; + u32 cause = readl(adapter->regs + A_SG_INT_CAUSE); + + if (adapter->flags & TSO_CAPABLE) + cause &= ~F_PACKET_TOO_BIG; + if (cause & F_RESPQ_EXHAUSTED) + sge->stats.respQ_empty++; + if (cause & F_RESPQ_OVERFLOW) { + sge->stats.respQ_overflow++; + CH_ALERT("%s: SGE response queue overflow\n", + adapter->name); + } + if (cause & F_FL_EXHAUSTED) { + sge->stats.freelistQ_empty++; + freelQs_empty(sge); + } + if (cause & F_PACKET_TOO_BIG) { + sge->stats.pkt_too_big++; + CH_ALERT("%s: SGE max packet size exceeded\n", + adapter->name); + } + if (cause & F_PACKET_MISMATCH) { + sge->stats.pkt_mismatch++; + CH_ALERT("%s: SGE packet mismatch\n", adapter->name); + } + if (cause & SGE_INT_FATAL) + t1_fatal_err(adapter); + + writel(cause, adapter->regs + A_SG_INT_CAUSE); + return 0; +} + +const struct sge_intr_counts *t1_sge_get_intr_counts(struct sge *sge) +{ + return &sge->stats; +} + +const struct sge_port_stats *t1_sge_get_port_stats(struct sge *sge, int port) +{ + return &sge->port_stats[port]; +} + +/** + * recycle_fl_buf - recycle a free list buffer + * @fl: the free list + * @idx: index of buffer to recycle + * + * Recycles the specified buffer on the given free list by adding it at + * the next available slot on the list. + */ +static void recycle_fl_buf(struct freelQ *fl, int idx) +{ + struct freelQ_e *from = &fl->entries[idx]; + struct freelQ_e *to = &fl->entries[fl->pidx]; + + fl->centries[fl->pidx] = fl->centries[idx]; + to->addr_lo = from->addr_lo; + to->addr_hi = from->addr_hi; + to->len_gen = G_CMD_LEN(from->len_gen) | V_CMD_GEN1(fl->genbit); + wmb(); + to->gen2 = V_CMD_GEN2(fl->genbit); + fl->credits++; + + if (++fl->pidx == fl->size) { + fl->pidx = 0; + fl->genbit ^= 1; + } +} + +/** + * get_packet - return the next ingress packet buffer + * @pdev: the PCI device that received the packet + * @fl: the SGE free list holding the packet + * @len: the actual packet length, excluding any SGE padding + * @dma_pad: padding at beginning of buffer left by SGE DMA + * @skb_pad: padding to be used if the packet is copied + * @copy_thres: length threshold under which a packet should be copied + * @drop_thres: # of remaining buffers before we start dropping packets + * + * Get the next packet from a free list and complete setup of the + * sk_buff. If the packet is small we make a copy and recycle the + * original buffer, otherwise we use the original buffer itself. If a + * positive drop threshold is supplied packets are dropped and their + * buffers recycled if (a) the number of remaining buffers is under the + * threshold and the packet is too big to copy, or (b) the packet should + * be copied but there is no memory for the copy. + */ +static inline struct sk_buff *get_packet(struct pci_dev *pdev, + struct freelQ *fl, unsigned int len, + int dma_pad, int skb_pad, + unsigned int copy_thres, + unsigned int drop_thres) +{ + struct sk_buff *skb; + struct freelQ_ce *ce = &fl->centries[fl->cidx]; + + if (len < copy_thres) { + skb = alloc_skb(len + skb_pad, GFP_ATOMIC); + if (likely(skb != NULL)) { + skb_reserve(skb, skb_pad); + skb_put(skb, len); + pci_dma_sync_single_for_cpu(pdev, + pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), + PCI_DMA_FROMDEVICE); + memcpy(skb->data, ce->skb->data + dma_pad, len); + pci_dma_sync_single_for_device(pdev, + pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), + PCI_DMA_FROMDEVICE); + } else if (!drop_thres) + goto use_orig_buf; + + recycle_fl_buf(fl, fl->cidx); + return skb; + } + + if (fl->credits < drop_thres) { + recycle_fl_buf(fl, fl->cidx); + return NULL; + } + +use_orig_buf: + pci_unmap_single(pdev, pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), PCI_DMA_FROMDEVICE); + skb = ce->skb; + skb_reserve(skb, dma_pad); + skb_put(skb, len); + return skb; +} + +/** + * unexpected_offload - handle an unexpected offload packet + * @adapter: the adapter + * @fl: the free list that received the packet + * + * Called when we receive an unexpected offload packet (e.g., the TOE + * function is disabled or the card is a NIC). Prints a message and + * recycles the buffer. + */ +static void unexpected_offload(struct adapter *adapter, struct freelQ *fl) +{ + struct freelQ_ce *ce = &fl->centries[fl->cidx]; + struct sk_buff *skb = ce->skb; + + pci_dma_sync_single_for_cpu(adapter->pdev, pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), PCI_DMA_FROMDEVICE); + CH_ERR("%s: unexpected offload packet, cmd %u\n", + adapter->name, *skb->data); + recycle_fl_buf(fl, fl->cidx); +} + +/* + * Write the command descriptors to transmit the given skb starting at + * descriptor pidx with the given generation. + */ +static inline void write_tx_descs(struct adapter *adapter, struct sk_buff *skb, + unsigned int pidx, unsigned int gen, + struct cmdQ *q) +{ + dma_addr_t mapping; + struct cmdQ_e *e, *e1; + struct cmdQ_ce *ce; + unsigned int i, flags, nfrags = skb_shinfo(skb)->nr_frags; + + mapping = pci_map_single(adapter->pdev, skb->data, + skb->len - skb->data_len, PCI_DMA_TODEVICE); + ce = &q->centries[pidx]; + ce->skb = NULL; + pci_unmap_addr_set(ce, dma_addr, mapping); + pci_unmap_len_set(ce, dma_len, skb->len - skb->data_len); + + flags = F_CMD_DATAVALID | F_CMD_SOP | V_CMD_EOP(nfrags == 0) | + V_CMD_GEN2(gen); + e = &q->entries[pidx]; + e->addr_lo = (u32)mapping; + e->addr_hi = (u64)mapping >> 32; + e->len_gen = V_CMD_LEN(skb->len - skb->data_len) | V_CMD_GEN1(gen); + for (e1 = e, i = 0; nfrags--; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + + ce++; + e1++; + if (++pidx == q->size) { + pidx = 0; + gen ^= 1; + ce = q->centries; + e1 = q->entries; + } + + mapping = pci_map_page(adapter->pdev, frag->page, + frag->page_offset, frag->size, + PCI_DMA_TODEVICE); + ce->skb = NULL; + pci_unmap_addr_set(ce, dma_addr, mapping); + pci_unmap_len_set(ce, dma_len, frag->size); + + e1->addr_lo = (u32)mapping; + e1->addr_hi = (u64)mapping >> 32; + e1->len_gen = V_CMD_LEN(frag->size) | V_CMD_GEN1(gen); + e1->flags = F_CMD_DATAVALID | V_CMD_EOP(nfrags == 0) | + V_CMD_GEN2(gen); + } + + ce->skb = skb; + wmb(); + e->flags = flags; +} + +/* + * Clean up completed Tx buffers. + */ +static inline void reclaim_completed_tx(struct sge *sge, struct cmdQ *q) +{ + unsigned int reclaim = q->processed - q->cleaned; + + if (reclaim) { + free_cmdQ_buffers(sge, q, reclaim); + q->cleaned += reclaim; + } +} + +#ifndef SET_ETHTOOL_OPS +# define __netif_rx_complete(dev) netif_rx_complete(dev) +#endif + +/* + * We cannot use the standard netif_rx_schedule_prep() because we have multiple + * ports plus the TOE all multiplexing onto a single response queue, therefore + * accepting new responses cannot depend on the state of any particular port. + * So define our own equivalent that omits the netif_running() test. + */ +static inline int napi_schedule_prep(struct net_device *dev) +{ + return !test_and_set_bit(__LINK_STATE_RX_SCHED, &dev->state); +} + + +/** + * sge_rx - process an ingress ethernet packet + * @sge: the sge structure + * @fl: the free list that contains the packet buffer + * @len: the packet length + * + * Process an ingress ethernet pakcet and deliver it to the stack. + */ +static int sge_rx(struct sge *sge, struct freelQ *fl, unsigned int len) +{ + struct sk_buff *skb; + struct cpl_rx_pkt *p; + struct adapter *adapter = sge->adapter; + + sge->stats.ethernet_pkts++; + skb = get_packet(adapter->pdev, fl, len - sge->rx_pkt_pad, + sge->rx_pkt_pad, 2, SGE_RX_COPY_THRES, + SGE_RX_DROP_THRES); + if (!skb) { + sge->port_stats[0].rx_drops++; /* charge only port 0 for now */ + return 0; + } + + p = (struct cpl_rx_pkt *)skb->data; + skb_pull(skb, sizeof(*p)); + skb->dev = adapter->port[p->iff].dev; + skb->dev->last_rx = jiffies; + skb->protocol = eth_type_trans(skb, skb->dev); + if ((adapter->flags & RX_CSUM_ENABLED) && p->csum == 0xffff && + skb->protocol == htons(ETH_P_IP) && + (skb->data[9] == IPPROTO_TCP || skb->data[9] == IPPROTO_UDP)) { + sge->port_stats[p->iff].rx_cso_good++; + skb->ip_summed = CHECKSUM_UNNECESSARY; + } else + skb->ip_summed = CHECKSUM_NONE; + + if (unlikely(adapter->vlan_grp && p->vlan_valid)) { + sge->port_stats[p->iff].vlan_xtract++; + if (adapter->params.sge.polling) + vlan_hwaccel_receive_skb(skb, adapter->vlan_grp, + ntohs(p->vlan)); + else + vlan_hwaccel_rx(skb, adapter->vlan_grp, + ntohs(p->vlan)); + } else if (adapter->params.sge.polling) + netif_receive_skb(skb); + else + netif_rx(skb); + return 0; +} + +/* + * Returns true if a command queue has enough available descriptors that + * we can resume Tx operation after temporarily disabling its packet queue. + */ +static inline int enough_free_Tx_descs(const struct cmdQ *q) +{ + unsigned int r = q->processed - q->cleaned; + + return q->in_use - r < (q->size >> 1); +} + +/* + * Called when sufficient space has become available in the SGE command queues + * after the Tx packet schedulers have been suspended to restart the Tx path. + */ +static void restart_tx_queues(struct sge *sge) +{ + struct adapter *adap = sge->adapter; + + if (enough_free_Tx_descs(&sge->cmdQ[0])) { + int i; + + for_each_port(adap, i) { + struct net_device *nd = adap->port[i].dev; + + if (test_and_clear_bit(nd->if_port, + &sge->stopped_tx_queues) && + netif_running(nd)) { + sge->stats.cmdQ_restarted[3]++; + netif_wake_queue(nd); + } + } + } +} + +/* + * update_tx_info is called from the interrupt handler/NAPI to return cmdQ0 + * information. + */ +static unsigned int update_tx_info(struct adapter *adapter, + unsigned int flags, + unsigned int pr0) +{ + struct sge *sge = adapter->sge; + struct cmdQ *cmdq = &sge->cmdQ[0]; + + cmdq->processed += pr0; + + if (flags & F_CMDQ0_ENABLE) { + clear_bit(CMDQ_STAT_RUNNING, &cmdq->status); + + if (cmdq->cleaned + cmdq->in_use != cmdq->processed && + !test_and_set_bit(CMDQ_STAT_LAST_PKT_DB, &cmdq->status)) { + set_bit(CMDQ_STAT_RUNNING, &cmdq->status); + writel(F_CMDQ0_ENABLE, adapter->regs + A_SG_DOORBELL); + } + flags &= ~F_CMDQ0_ENABLE; + } + + if (unlikely(sge->stopped_tx_queues != 0)) + restart_tx_queues(sge); + + return flags; +} + +/* + * Process SGE responses, up to the supplied budget. Returns the number of + * responses processed. A negative budget is effectively unlimited. + */ +static int process_responses(struct adapter *adapter, int budget) +{ + struct sge *sge = adapter->sge; + struct respQ *q = &sge->respQ; + struct respQ_e *e = &q->entries[q->cidx]; + int budget_left = budget; + unsigned int flags = 0; + unsigned int cmdq_processed[SGE_CMDQ_N] = {0, 0}; + + + while (likely(budget_left && e->GenerationBit == q->genbit)) { + flags |= e->Qsleeping; + + cmdq_processed[0] += e->Cmdq0CreditReturn; + cmdq_processed[1] += e->Cmdq1CreditReturn; + + /* We batch updates to the TX side to avoid cacheline + * ping-pong of TX state information on MP where the sender + * might run on a different CPU than this function... + */ + if (unlikely(flags & F_CMDQ0_ENABLE || cmdq_processed[0] > 64)) { + flags = update_tx_info(adapter, flags, cmdq_processed[0]); + cmdq_processed[0] = 0; + } + if (unlikely(cmdq_processed[1] > 16)) { + sge->cmdQ[1].processed += cmdq_processed[1]; + cmdq_processed[1] = 0; + } + if (likely(e->DataValid)) { + struct freelQ *fl = &sge->freelQ[e->FreelistQid]; + + if (unlikely(!e->Sop || !e->Eop)) + BUG(); + if (unlikely(e->Offload)) + unexpected_offload(adapter, fl); + else + sge_rx(sge, fl, e->BufferLength); + + /* + * Note: this depends on each packet consuming a + * single free-list buffer; cf. the BUG above. + */ + if (++fl->cidx == fl->size) + fl->cidx = 0; + if (unlikely(--fl->credits < + fl->size - SGE_FREEL_REFILL_THRESH)) + refill_free_list(sge, fl); + } else + sge->stats.pure_rsps++; + + e++; + if (unlikely(++q->cidx == q->size)) { + q->cidx = 0; + q->genbit ^= 1; + e = q->entries; + } + prefetch(e); + + if (++q->credits > SGE_RESPQ_REPLENISH_THRES) { + writel(q->credits, adapter->regs + A_SG_RSPQUEUECREDIT); + q->credits = 0; + } + --budget_left; + } + + flags = update_tx_info(adapter, flags, cmdq_processed[0]); + sge->cmdQ[1].processed += cmdq_processed[1]; + + budget -= budget_left; + return budget; +} + +/* + * A simpler version of process_responses() that handles only pure (i.e., + * non data-carrying) responses. Such respones are too light-weight to justify + * calling a softirq when using NAPI, so we handle them specially in hard + * interrupt context. The function is called with a pointer to a response, + * which the caller must ensure is a valid pure response. Returns 1 if it + * encounters a valid data-carrying response, 0 otherwise. + */ +static int process_pure_responses(struct adapter *adapter, struct respQ_e *e) +{ + struct sge *sge = adapter->sge; + struct respQ *q = &sge->respQ; + unsigned int flags = 0; + unsigned int cmdq_processed[SGE_CMDQ_N] = {0, 0}; + + do { + flags |= e->Qsleeping; + + cmdq_processed[0] += e->Cmdq0CreditReturn; + cmdq_processed[1] += e->Cmdq1CreditReturn; + + e++; + if (unlikely(++q->cidx == q->size)) { + q->cidx = 0; + q->genbit ^= 1; + e = q->entries; + } + prefetch(e); + + if (++q->credits > SGE_RESPQ_REPLENISH_THRES) { + writel(q->credits, adapter->regs + A_SG_RSPQUEUECREDIT); + q->credits = 0; + } + sge->stats.pure_rsps++; + } while (e->GenerationBit == q->genbit && !e->DataValid); + + flags = update_tx_info(adapter, flags, cmdq_processed[0]); + sge->cmdQ[1].processed += cmdq_processed[1]; + + return e->GenerationBit == q->genbit; +} + +/* + * Handler for new data events when using NAPI. This does not need any locking + * or protection from interrupts as data interrupts are off at this point and + * other adapter interrupts do not interfere. + */ +static int t1_poll(struct net_device *dev, int *budget) +{ + struct adapter *adapter = dev->priv; + int effective_budget = min(*budget, dev->quota); + + int work_done = process_responses(adapter, effective_budget); + *budget -= work_done; + dev->quota -= work_done; + + if (work_done >= effective_budget) + return 1; + + __netif_rx_complete(dev); + + /* + * Because we don't atomically flush the following write it is + * possible that in very rare cases it can reach the device in a way + * that races with a new response being written plus an error interrupt + * causing the NAPI interrupt handler below to return unhandled status + * to the OS. To protect against this would require flushing the write + * and doing both the write and the flush with interrupts off. Way too + * expensive and unjustifiable given the rarity of the race. + */ + writel(adapter->sge->respQ.cidx, adapter->regs + A_SG_SLEEPING); + return 0; +} + +/* + * Returns true if the device is already scheduled for polling. + */ +static inline int napi_is_scheduled(struct net_device *dev) +{ + return test_bit(__LINK_STATE_RX_SCHED, &dev->state); +} + +/* + * NAPI version of the main interrupt handler. + */ +static irqreturn_t t1_interrupt_napi(int irq, void *data, struct pt_regs *regs) +{ + int handled; + struct adapter *adapter = data; + struct sge *sge = adapter->sge; + struct respQ *q = &adapter->sge->respQ; + + /* + * Clear the SGE_DATA interrupt first thing. Normally the NAPI + * handler has control of the response queue and the interrupt handler + * can look at the queue reliably only once it knows NAPI is off. + * We can't wait that long to clear the SGE_DATA interrupt because we + * could race with t1_poll rearming the SGE interrupt, so we need to + * clear the interrupt speculatively and really early on. + */ + writel(F_PL_INTR_SGE_DATA, adapter->regs + A_PL_CAUSE); + + spin_lock(&adapter->async_lock); + if (!napi_is_scheduled(sge->netdev)) { + struct respQ_e *e = &q->entries[q->cidx]; + + if (e->GenerationBit == q->genbit) { + if (e->DataValid || + process_pure_responses(adapter, e)) { + if (likely(napi_schedule_prep(sge->netdev))) + __netif_rx_schedule(sge->netdev); + else + printk(KERN_CRIT + "NAPI schedule failure!\n"); + } else + writel(q->cidx, adapter->regs + A_SG_SLEEPING); + handled = 1; + goto unlock; + } else + writel(q->cidx, adapter->regs + A_SG_SLEEPING); + } else + if (readl(adapter->regs + A_PL_CAUSE) & F_PL_INTR_SGE_DATA) + printk(KERN_ERR "data interrupt while NAPI running\n"); + + handled = t1_slow_intr_handler(adapter); + if (!handled) + sge->stats.unhandled_irqs++; + unlock: + spin_unlock(&adapter->async_lock); + return IRQ_RETVAL(handled != 0); +} + +/* + * Main interrupt handler, optimized assuming that we took a 'DATA' + * interrupt. + * + * 1. Clear the interrupt + * 2. Loop while we find valid descriptors and process them; accumulate + * information that can be processed after the loop + * 3. Tell the SGE at which index we stopped processing descriptors + * 4. Bookkeeping; free TX buffers, ring doorbell if there are any + * outstanding TX buffers waiting, replenish RX buffers, potentially + * reenable upper layers if they were turned off due to lack of TX + * resources which are available again. + * 5. If we took an interrupt, but no valid respQ descriptors was found we + * let the slow_intr_handler run and do error handling. + */ +static irqreturn_t t1_interrupt(int irq, void *cookie, struct pt_regs *regs) +{ + int work_done; + struct respQ_e *e; + struct adapter *adapter = cookie; + struct respQ *Q = &adapter->sge->respQ; + + spin_lock(&adapter->async_lock); + e = &Q->entries[Q->cidx]; + prefetch(e); + + writel(F_PL_INTR_SGE_DATA, adapter->regs + A_PL_CAUSE); + + if (likely(e->GenerationBit == Q->genbit)) + work_done = process_responses(adapter, -1); + else + work_done = t1_slow_intr_handler(adapter); + + /* + * The unconditional clearing of the PL_CAUSE above may have raced + * with DMA completion and the corresponding generation of a response + * to cause us to miss the resulting data interrupt. The next write + * is also unconditional to recover the missed interrupt and render + * this race harmless. + */ + writel(Q->cidx, adapter->regs + A_SG_SLEEPING); + + if (!work_done) + adapter->sge->stats.unhandled_irqs++; + spin_unlock(&adapter->async_lock); + return IRQ_RETVAL(work_done != 0); +} + +intr_handler_t t1_select_intr_handler(adapter_t *adapter) +{ + return adapter->params.sge.polling ? t1_interrupt_napi : t1_interrupt; +} + +/* + * Enqueues the sk_buff onto the cmdQ[qid] and has hardware fetch it. + * + * The code figures out how many entries the sk_buff will require in the + * cmdQ and updates the cmdQ data structure with the state once the enqueue + * has complete. Then, it doesn't access the global structure anymore, but + * uses the corresponding fields on the stack. In conjuction with a spinlock + * around that code, we can make the function reentrant without holding the + * lock when we actually enqueue (which might be expensive, especially on + * architectures with IO MMUs). + * + * This runs with softirqs disabled. + */ +unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, + unsigned int qid, struct net_device *dev) +{ + struct sge *sge = adapter->sge; + struct cmdQ *q = &sge->cmdQ[qid]; + unsigned int credits, pidx, genbit, count; + + spin_lock(&q->lock); + reclaim_completed_tx(sge, q); + + pidx = q->pidx; + credits = q->size - q->in_use; + count = 1 + skb_shinfo(skb)->nr_frags; + + { /* Ethernet packet */ + if (unlikely(credits < count)) { + netif_stop_queue(dev); + set_bit(dev->if_port, &sge->stopped_tx_queues); + sge->stats.cmdQ_full[3]++; + spin_unlock(&q->lock); + CH_ERR("%s: Tx ring full while queue awake!\n", + adapter->name); + return 1; + } + if (unlikely(credits - count < q->stop_thres)) { + sge->stats.cmdQ_full[3]++; + netif_stop_queue(dev); + set_bit(dev->if_port, &sge->stopped_tx_queues); + } + } + q->in_use += count; + genbit = q->genbit; + q->pidx += count; + if (q->pidx >= q->size) { + q->pidx -= q->size; + q->genbit ^= 1; + } + spin_unlock(&q->lock); + + write_tx_descs(adapter, skb, pidx, genbit, q); + + /* + * We always ring the doorbell for cmdQ1. For cmdQ0, we only ring + * the doorbell if the Q is asleep. There is a natural race, where + * the hardware is going to sleep just after we checked, however, + * then the interrupt handler will detect the outstanding TX packet + * and ring the doorbell for us. + */ + if (qid) + doorbell_pio(adapter, F_CMDQ1_ENABLE); + else { + clear_bit(CMDQ_STAT_LAST_PKT_DB, &q->status); + if (test_and_set_bit(CMDQ_STAT_RUNNING, &q->status) == 0) { + set_bit(CMDQ_STAT_LAST_PKT_DB, &q->status); + writel(F_CMDQ0_ENABLE, adapter->regs + A_SG_DOORBELL); + } + } + return 0; +} + +#define MK_ETH_TYPE_MSS(type, mss) (((mss) & 0x3FFF) | ((type) << 14)) + +/* + * eth_hdr_len - return the length of an Ethernet header + * @data: pointer to the start of the Ethernet header + * + * Returns the length of an Ethernet header, including optional VLAN tag. + */ +static inline int eth_hdr_len(const void *data) +{ + const struct ethhdr *e = data; + + return e->h_proto == htons(ETH_P_8021Q) ? VLAN_ETH_HLEN : ETH_HLEN; +} + +/* + * Adds the CPL header to the sk_buff and passes it to t1_sge_tx. + */ +int t1_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct adapter *adapter = dev->priv; + struct sge_port_stats *st = &adapter->sge->port_stats[dev->if_port]; + struct sge *sge = adapter->sge; + struct cpl_tx_pkt *cpl; + +#ifdef NETIF_F_TSO + if (skb_shinfo(skb)->tso_size) { + int eth_type; + struct cpl_tx_pkt_lso *hdr; + + st->tso++; + + eth_type = skb->nh.raw - skb->data == ETH_HLEN ? + CPL_ETH_II : CPL_ETH_II_VLAN; + + hdr = (struct cpl_tx_pkt_lso *)skb_push(skb, sizeof(*hdr)); + hdr->opcode = CPL_TX_PKT_LSO; + hdr->ip_csum_dis = hdr->l4_csum_dis = 0; + hdr->ip_hdr_words = skb->nh.iph->ihl; + hdr->tcp_hdr_words = skb->h.th->doff; + hdr->eth_type_mss = htons(MK_ETH_TYPE_MSS(eth_type, + skb_shinfo(skb)->tso_size)); + hdr->len = htonl(skb->len - sizeof(*hdr)); + cpl = (struct cpl_tx_pkt *)hdr; + sge->stats.tx_lso_pkts++; + } else +#endif + { + /* + * Packets shorter than ETH_HLEN can break the MAC, drop them + * early. Also, we may get oversized packets because some + * parts of the kernel don't handle our unusual hard_header_len + * right, drop those too. + */ + if (unlikely(skb->len < ETH_HLEN || + skb->len > dev->mtu + eth_hdr_len(skb->data))) { + dev_kfree_skb_any(skb); + return NET_XMIT_SUCCESS; + } + + /* + * We are using a non-standard hard_header_len and some kernel + * components, such as pktgen, do not handle it right. + * Complain when this happens but try to fix things up. + */ + if (unlikely(skb_headroom(skb) < + dev->hard_header_len - ETH_HLEN)) { + struct sk_buff *orig_skb = skb; + + if (net_ratelimit()) + printk(KERN_ERR "%s: inadequate headroom in " + "Tx packet\n", dev->name); + skb = skb_realloc_headroom(skb, sizeof(*cpl)); + dev_kfree_skb_any(orig_skb); + if (!skb) + return -ENOMEM; + } + + if (!(adapter->flags & UDP_CSUM_CAPABLE) && + skb->ip_summed == CHECKSUM_HW && + skb->nh.iph->protocol == IPPROTO_UDP) + if (unlikely(skb_checksum_help(skb, 0))) { + dev_kfree_skb_any(skb); + return -ENOMEM; + } + + /* Hmmm, assuming to catch the gratious arp... and we'll use + * it to flush out stuck espi packets... + */ + if (unlikely(!adapter->sge->espibug_skb)) { + if (skb->protocol == htons(ETH_P_ARP) && + skb->nh.arph->ar_op == htons(ARPOP_REQUEST)) { + adapter->sge->espibug_skb = skb; + /* We want to re-use this skb later. We + * simply bump the reference count and it + * will not be freed... + */ + skb = skb_get(skb); + } + } + + cpl = (struct cpl_tx_pkt *)__skb_push(skb, sizeof(*cpl)); + cpl->opcode = CPL_TX_PKT; + cpl->ip_csum_dis = 1; /* SW calculates IP csum */ + cpl->l4_csum_dis = skb->ip_summed == CHECKSUM_HW ? 0 : 1; + /* the length field isn't used so don't bother setting it */ + + st->tx_cso += (skb->ip_summed == CHECKSUM_HW); + sge->stats.tx_do_cksum += (skb->ip_summed == CHECKSUM_HW); + sge->stats.tx_reg_pkts++; + } + cpl->iff = dev->if_port; + +#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) + if (adapter->vlan_grp && vlan_tx_tag_present(skb)) { + cpl->vlan_valid = 1; + cpl->vlan = htons(vlan_tx_tag_get(skb)); + st->vlan_insert++; + } else +#endif + cpl->vlan_valid = 0; + + dev->trans_start = jiffies; + return t1_sge_tx(skb, adapter, 0, dev); +} + +/* + * Callback for the Tx buffer reclaim timer. Runs with softirqs disabled. + */ +static void sge_tx_reclaim_cb(unsigned long data) +{ + int i; + struct sge *sge = (struct sge *)data; + + for (i = 0; i < SGE_CMDQ_N; ++i) { + struct cmdQ *q = &sge->cmdQ[i]; + + if (!spin_trylock(&q->lock)) + continue; + + reclaim_completed_tx(sge, q); + if (i == 0 && q->in_use) /* flush pending credits */ + writel(F_CMDQ0_ENABLE, + sge->adapter->regs + A_SG_DOORBELL); + + spin_unlock(&q->lock); + } + mod_timer(&sge->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD); +} + +/* + * Propagate changes of the SGE coalescing parameters to the HW. + */ +int t1_sge_set_coalesce_params(struct sge *sge, struct sge_params *p) +{ + sge->netdev->poll = t1_poll; + sge->fixed_intrtimer = p->rx_coalesce_usecs * + core_ticks_per_usec(sge->adapter); + writel(sge->fixed_intrtimer, sge->adapter->regs + A_SG_INTRTIMER); + return 0; +} + +/* + * Allocates both RX and TX resources and configures the SGE. However, + * the hardware is not enabled yet. + */ +int t1_sge_configure(struct sge *sge, struct sge_params *p) +{ + if (alloc_rx_resources(sge, p)) + return -ENOMEM; + if (alloc_tx_resources(sge, p)) { + free_rx_resources(sge); + return -ENOMEM; + } + configure_sge(sge, p); + + /* + * Now that we have sized the free lists calculate the payload + * capacity of the large buffers. Other parts of the driver use + * this to set the max offload coalescing size so that RX packets + * do not overflow our large buffers. + */ + p->large_buf_capacity = jumbo_payload_capacity(sge); + return 0; +} + +/* + * Disables the DMA engine. + */ +void t1_sge_stop(struct sge *sge) +{ + writel(0, sge->adapter->regs + A_SG_CONTROL); + (void) readl(sge->adapter->regs + A_SG_CONTROL); /* flush */ + if (is_T2(sge->adapter)) + del_timer_sync(&sge->espibug_timer); + del_timer_sync(&sge->tx_reclaim_timer); +} + +/* + * Enables the DMA engine. + */ +void t1_sge_start(struct sge *sge) +{ + refill_free_list(sge, &sge->freelQ[0]); + refill_free_list(sge, &sge->freelQ[1]); + + writel(sge->sge_control, sge->adapter->regs + A_SG_CONTROL); + doorbell_pio(sge->adapter, F_FL0_ENABLE | F_FL1_ENABLE); + (void) readl(sge->adapter->regs + A_SG_CONTROL); /* flush */ + + mod_timer(&sge->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD); + + if (is_T2(sge->adapter)) + mod_timer(&sge->espibug_timer, jiffies + sge->espibug_timeout); +} + +/* + * Callback for the T2 ESPI 'stuck packet feature' workaorund + */ +static void espibug_workaround(void *data) +{ + struct adapter *adapter = (struct adapter *)data; + struct sge *sge = adapter->sge; + + if (netif_running(adapter->port[0].dev)) { + struct sk_buff *skb = sge->espibug_skb; + + u32 seop = t1_espi_get_mon(adapter, 0x930, 0); + + if ((seop & 0xfff0fff) == 0xfff && skb) { + if (!skb->cb[0]) { + u8 ch_mac_addr[ETH_ALEN] = + {0x0, 0x7, 0x43, 0x0, 0x0, 0x0}; + memcpy(skb->data + sizeof(struct cpl_tx_pkt), + ch_mac_addr, ETH_ALEN); + memcpy(skb->data + skb->len - 10, ch_mac_addr, + ETH_ALEN); + skb->cb[0] = 0xff; + } + + /* bump the reference count to avoid freeing of the + * skb once the DMA has completed. + */ + skb = skb_get(skb); + t1_sge_tx(skb, adapter, 0, adapter->port[0].dev); + } + } + mod_timer(&sge->espibug_timer, jiffies + sge->espibug_timeout); +} + +/* + * Creates a t1_sge structure and returns suggested resource parameters. + */ +struct sge * __devinit t1_sge_create(struct adapter *adapter, + struct sge_params *p) +{ + struct sge *sge = kmalloc(sizeof(*sge), GFP_KERNEL); + + if (!sge) + return NULL; + memset(sge, 0, sizeof(*sge)); + + sge->adapter = adapter; + sge->netdev = adapter->port[0].dev; + sge->rx_pkt_pad = t1_is_T1B(adapter) ? 0 : 2; + sge->jumbo_fl = t1_is_T1B(adapter) ? 1 : 0; + + init_timer(&sge->tx_reclaim_timer); + sge->tx_reclaim_timer.data = (unsigned long)sge; + sge->tx_reclaim_timer.function = sge_tx_reclaim_cb; + + if (is_T2(sge->adapter)) { + init_timer(&sge->espibug_timer); + sge->espibug_timer.function = (void *)&espibug_workaround; + sge->espibug_timer.data = (unsigned long)sge->adapter; + sge->espibug_timeout = 1; + } + + + p->cmdQ_size[0] = SGE_CMDQ0_E_N; + p->cmdQ_size[1] = SGE_CMDQ1_E_N; + p->freelQ_size[!sge->jumbo_fl] = SGE_FREEL_SIZE; + p->freelQ_size[sge->jumbo_fl] = SGE_JUMBO_FREEL_SIZE; + p->rx_coalesce_usecs = 50; + p->coalesce_enable = 0; + p->sample_interval_usecs = 0; + p->polling = 0; + + return sge; +} diff --git a/drivers/net/chelsio/sge.h b/drivers/net/chelsio/sge.h new file mode 100644 index 000000000000..434b25586851 --- /dev/null +++ b/drivers/net/chelsio/sge.h @@ -0,0 +1,105 @@ +/***************************************************************************** + * * + * File: sge.h * + * $Revision: 1.11 $ * + * $Date: 2005/06/21 22:10:55 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis <dm@chelsio.com> * + * Tina Yang <tainay@chelsio.com> * + * Felix Marti <felix@chelsio.com> * + * Scott Bardone <sbardone@chelsio.com> * + * Kurt Ottaway <kottaway@chelsio.com> * + * Frank DiMambro <frank@chelsio.com> * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef _CXGB_SGE_H_ +#define _CXGB_SGE_H_ + +#include <linux/types.h> +#include <linux/interrupt.h> +#include <asm/byteorder.h> + +#ifndef IRQ_RETVAL +#define IRQ_RETVAL(x) +typedef void irqreturn_t; +#endif + +typedef irqreturn_t (*intr_handler_t)(int, void *, struct pt_regs *); + +struct sge_intr_counts { + unsigned int respQ_empty; /* # times respQ empty */ + unsigned int respQ_overflow; /* # respQ overflow (fatal) */ + unsigned int freelistQ_empty; /* # times freelist empty */ + unsigned int pkt_too_big; /* packet too large (fatal) */ + unsigned int pkt_mismatch; + unsigned int cmdQ_full[3]; /* not HW IRQ, host cmdQ[] full */ + unsigned int cmdQ_restarted[3];/* # of times cmdQ X was restarted */ + unsigned int ethernet_pkts; /* # of Ethernet packets received */ + unsigned int offload_pkts; /* # of offload packets received */ + unsigned int offload_bundles; /* # of offload pkt bundles delivered */ + unsigned int pure_rsps; /* # of non-payload responses */ + unsigned int unhandled_irqs; /* # of unhandled interrupts */ + unsigned int tx_ipfrags; + unsigned int tx_reg_pkts; + unsigned int tx_lso_pkts; + unsigned int tx_do_cksum; +}; + +struct sge_port_stats { + unsigned long rx_cso_good; /* # of successful RX csum offloads */ + unsigned long tx_cso; /* # of TX checksum offloads */ + unsigned long vlan_xtract; /* # of VLAN tag extractions */ + unsigned long vlan_insert; /* # of VLAN tag extractions */ + unsigned long tso; /* # of TSO requests */ + unsigned long rx_drops; /* # of packets dropped due to no mem */ +}; + +struct sk_buff; +struct net_device; +struct adapter; +struct sge_params; +struct sge; + +struct sge *t1_sge_create(struct adapter *, struct sge_params *); +int t1_sge_configure(struct sge *, struct sge_params *); +int t1_sge_set_coalesce_params(struct sge *, struct sge_params *); +void t1_sge_destroy(struct sge *); +intr_handler_t t1_select_intr_handler(adapter_t *adapter); +unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, + unsigned int qid, struct net_device *netdev); +int t1_start_xmit(struct sk_buff *skb, struct net_device *dev); +void t1_set_vlan_accel(struct adapter *adapter, int on_off); +void t1_sge_start(struct sge *); +void t1_sge_stop(struct sge *); +int t1_sge_intr_error_handler(struct sge *); +void t1_sge_intr_enable(struct sge *); +void t1_sge_intr_disable(struct sge *); +void t1_sge_intr_clear(struct sge *); +const struct sge_intr_counts *t1_sge_get_intr_counts(struct sge *sge); +const struct sge_port_stats *t1_sge_get_port_stats(struct sge *sge, int port); + +#endif /* _CXGB_SGE_H_ */ diff --git a/drivers/net/chelsio/subr.c b/drivers/net/chelsio/subr.c new file mode 100644 index 000000000000..1ebb5d149aef --- /dev/null +++ b/drivers/net/chelsio/subr.c @@ -0,0 +1,812 @@ +/***************************************************************************** + * * + * File: subr.c * + * $Revision: 1.27 $ * + * $Date: 2005/06/22 01:08:36 $ * + * Description: * + * Various subroutines (intr,pio,etc.) used by Chelsio 10G Ethernet driver. * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis <dm@chelsio.com> * + * Tina Yang <tainay@chelsio.com> * + * Felix Marti <felix@chelsio.com> * + * Scott Bardone <sbardone@chelsio.com> * + * Kurt Ottaway <kottaway@chelsio.com> * + * Frank DiMambro <frank@chelsio.com> * + * * + * History: * + * * + ****************************************************************************/ + +#include "common.h" +#include "elmer0.h" +#include "regs.h" +#include "gmac.h" +#include "cphy.h" +#include "sge.h" +#include "espi.h" + +/** + * t1_wait_op_done - wait until an operation is completed + * @adapter: the adapter performing the operation + * @reg: the register to check for completion + * @mask: a single-bit field within @reg that indicates completion + * @polarity: the value of the field when the operation is completed + * @attempts: number of check iterations + * @delay: delay in usecs between iterations + * + * Wait until an operation is completed by checking a bit in a register + * up to @attempts times. Returns %0 if the operation completes and %1 + * otherwise. + */ +static int t1_wait_op_done(adapter_t *adapter, int reg, u32 mask, int polarity, + int attempts, int delay) +{ + while (1) { + u32 val = readl(adapter->regs + reg) & mask; + + if (!!val == polarity) + return 0; + if (--attempts == 0) + return 1; + if (delay) + udelay(delay); + } +} + +#define TPI_ATTEMPTS 50 + +/* + * Write a register over the TPI interface (unlocked and locked versions). + */ +static int __t1_tpi_write(adapter_t *adapter, u32 addr, u32 value) +{ + int tpi_busy; + + writel(addr, adapter->regs + A_TPI_ADDR); + writel(value, adapter->regs + A_TPI_WR_DATA); + writel(F_TPIWR, adapter->regs + A_TPI_CSR); + + tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1, + TPI_ATTEMPTS, 3); + if (tpi_busy) + CH_ALERT("%s: TPI write to 0x%x failed\n", + adapter->name, addr); + return tpi_busy; +} + +int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value) +{ + int ret; + + spin_lock(&(adapter)->tpi_lock); + ret = __t1_tpi_write(adapter, addr, value); + spin_unlock(&(adapter)->tpi_lock); + return ret; +} + +/* + * Read a register over the TPI interface (unlocked and locked versions). + */ +static int __t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp) +{ + int tpi_busy; + + writel(addr, adapter->regs + A_TPI_ADDR); + writel(0, adapter->regs + A_TPI_CSR); + + tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1, + TPI_ATTEMPTS, 3); + if (tpi_busy) + CH_ALERT("%s: TPI read from 0x%x failed\n", + adapter->name, addr); + else + *valp = readl(adapter->regs + A_TPI_RD_DATA); + return tpi_busy; +} + +int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp) +{ + int ret; + + spin_lock(&(adapter)->tpi_lock); + ret = __t1_tpi_read(adapter, addr, valp); + spin_unlock(&(adapter)->tpi_lock); + return ret; +} + +/* + * Called when a port's link settings change to propagate the new values to the + * associated PHY and MAC. After performing the common tasks it invokes an + * OS-specific handler. + */ +/* static */ void link_changed(adapter_t *adapter, int port_id) +{ + int link_ok, speed, duplex, fc; + struct cphy *phy = adapter->port[port_id].phy; + struct link_config *lc = &adapter->port[port_id].link_config; + + phy->ops->get_link_status(phy, &link_ok, &speed, &duplex, &fc); + + lc->speed = speed < 0 ? SPEED_INVALID : speed; + lc->duplex = duplex < 0 ? DUPLEX_INVALID : duplex; + if (!(lc->requested_fc & PAUSE_AUTONEG)) + fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX); + + if (link_ok && speed >= 0 && lc->autoneg == AUTONEG_ENABLE) { + /* Set MAC speed, duplex, and flow control to match PHY. */ + struct cmac *mac = adapter->port[port_id].mac; + + mac->ops->set_speed_duplex_fc(mac, speed, duplex, fc); + lc->fc = (unsigned char)fc; + } + t1_link_changed(adapter, port_id, link_ok, speed, duplex, fc); +} + +static int t1_pci_intr_handler(adapter_t *adapter) +{ + u32 pcix_cause; + + pci_read_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, &pcix_cause); + + if (pcix_cause) { + pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, + pcix_cause); + t1_fatal_err(adapter); /* PCI errors are fatal */ + } + return 0; +} + + +/* + * Wait until Elmer's MI1 interface is ready for new operations. + */ +static int mi1_wait_until_ready(adapter_t *adapter, int mi1_reg) +{ + int attempts = 100, busy; + + do { + u32 val; + + __t1_tpi_read(adapter, mi1_reg, &val); + busy = val & F_MI1_OP_BUSY; + if (busy) + udelay(10); + } while (busy && --attempts); + if (busy) + CH_ALERT("%s: MDIO operation timed out\n", + adapter->name); + return busy; +} + +/* + * MI1 MDIO initialization. + */ +static void mi1_mdio_init(adapter_t *adapter, const struct board_info *bi) +{ + u32 clkdiv = bi->clock_elmer0 / (2 * bi->mdio_mdc) - 1; + u32 val = F_MI1_PREAMBLE_ENABLE | V_MI1_MDI_INVERT(bi->mdio_mdiinv) | + V_MI1_MDI_ENABLE(bi->mdio_mdien) | V_MI1_CLK_DIV(clkdiv); + + if (!(bi->caps & SUPPORTED_10000baseT_Full)) + val |= V_MI1_SOF(1); + t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_CFG, val); +} + +static int mi1_mdio_ext_read(adapter_t *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int *valp) +{ + u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr); + + spin_lock(&(adapter)->tpi_lock); + + /* Write the address we want. */ + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr); + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, reg_addr); + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, + MI1_OP_INDIRECT_ADDRESS); + mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP); + + /* Write the operation we want. */ + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_READ); + mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP); + + /* Read the data. */ + __t1_tpi_read(adapter, A_ELMER0_PORT0_MI1_DATA, valp); + spin_unlock(&(adapter)->tpi_lock); + return 0; +} + +static int mi1_mdio_ext_write(adapter_t *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int val) +{ + u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr); + + spin_lock(&(adapter)->tpi_lock); + + /* Write the address we want. */ + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr); + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, reg_addr); + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, + MI1_OP_INDIRECT_ADDRESS); + mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP); + + /* Write the data. */ + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, val); + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_WRITE); + mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP); + spin_unlock(&(adapter)->tpi_lock); + return 0; +} + +static struct mdio_ops mi1_mdio_ext_ops = { + mi1_mdio_init, + mi1_mdio_ext_read, + mi1_mdio_ext_write +}; + +enum { + CH_BRD_N110_1F, + CH_BRD_N210_1F, +}; + +static struct board_info t1_board[] = { + +{ CHBT_BOARD_N110, 1/*ports#*/, + SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE /*caps*/, CHBT_TERM_T1, + CHBT_MAC_PM3393, CHBT_PHY_88X2010, + 125000000/*clk-core*/, 0/*clk-mc3*/, 0/*clk-mc4*/, + 1/*espi-ports*/, 0/*clk-cspi*/, 44/*clk-elmer0*/, 0/*mdien*/, + 0/*mdiinv*/, 1/*mdc*/, 0/*phybaseaddr*/, &t1_pm3393_ops, + &t1_mv88x201x_ops, &mi1_mdio_ext_ops, + "Chelsio N110 1x10GBaseX NIC" }, + +{ CHBT_BOARD_N210, 1/*ports#*/, + SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE /*caps*/, CHBT_TERM_T2, + CHBT_MAC_PM3393, CHBT_PHY_88X2010, + 125000000/*clk-core*/, 0/*clk-mc3*/, 0/*clk-mc4*/, + 1/*espi-ports*/, 0/*clk-cspi*/, 44/*clk-elmer0*/, 0/*mdien*/, + 0/*mdiinv*/, 1/*mdc*/, 0/*phybaseaddr*/, &t1_pm3393_ops, + &t1_mv88x201x_ops, &mi1_mdio_ext_ops, + "Chelsio N210 1x10GBaseX NIC" }, + +}; + +struct pci_device_id t1_pci_tbl[] = { + CH_DEVICE(7, 0, CH_BRD_N110_1F), + CH_DEVICE(10, 1, CH_BRD_N210_1F), + { 0, } +}; + +MODULE_DEVICE_TABLE(pci, t1_pci_tbl); + +/* + * Return the board_info structure with a given index. Out-of-range indices + * return NULL. + */ +const struct board_info *t1_get_board_info(unsigned int board_id) +{ + return board_id < ARRAY_SIZE(t1_board) ? &t1_board[board_id] : NULL; +} + +struct chelsio_vpd_t { + u32 format_version; + u8 serial_number[16]; + u8 mac_base_address[6]; + u8 pad[2]; /* make multiple-of-4 size requirement explicit */ +}; + +#define EEPROMSIZE (8 * 1024) +#define EEPROM_MAX_POLL 4 + +/* + * Read SEEPROM. A zero is written to the flag register when the addres is + * written to the Control register. The hardware device will set the flag to a + * one when 4B have been transferred to the Data register. + */ +int t1_seeprom_read(adapter_t *adapter, u32 addr, u32 *data) +{ + int i = EEPROM_MAX_POLL; + u16 val; + + if (addr >= EEPROMSIZE || (addr & 3)) + return -EINVAL; + + pci_write_config_word(adapter->pdev, A_PCICFG_VPD_ADDR, (u16)addr); + do { + udelay(50); + pci_read_config_word(adapter->pdev, A_PCICFG_VPD_ADDR, &val); + } while (!(val & F_VPD_OP_FLAG) && --i); + + if (!(val & F_VPD_OP_FLAG)) { + CH_ERR("%s: reading EEPROM address 0x%x failed\n", + adapter->name, addr); + return -EIO; + } + pci_read_config_dword(adapter->pdev, A_PCICFG_VPD_DATA, data); + *data = le32_to_cpu(*data); + return 0; +} + +static int t1_eeprom_vpd_get(adapter_t *adapter, struct chelsio_vpd_t *vpd) +{ + int addr, ret = 0; + + for (addr = 0; !ret && addr < sizeof(*vpd); addr += sizeof(u32)) + ret = t1_seeprom_read(adapter, addr, + (u32 *)((u8 *)vpd + addr)); + + return ret; +} + +/* + * Read a port's MAC address from the VPD ROM. + */ +static int vpd_macaddress_get(adapter_t *adapter, int index, u8 mac_addr[]) +{ + struct chelsio_vpd_t vpd; + + if (t1_eeprom_vpd_get(adapter, &vpd)) + return 1; + memcpy(mac_addr, vpd.mac_base_address, 5); + mac_addr[5] = vpd.mac_base_address[5] + index; + return 0; +} + +/* + * Set up the MAC/PHY according to the requested link settings. + * + * If the PHY can auto-negotiate first decide what to advertise, then + * enable/disable auto-negotiation as desired and reset. + * + * If the PHY does not auto-negotiate we just reset it. + * + * If auto-negotiation is off set the MAC to the proper speed/duplex/FC, + * otherwise do it later based on the outcome of auto-negotiation. + */ +int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc) +{ + unsigned int fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX); + + if (lc->supported & SUPPORTED_Autoneg) { + lc->advertising &= ~(ADVERTISED_ASYM_PAUSE | ADVERTISED_PAUSE); + if (fc) { + lc->advertising |= ADVERTISED_ASYM_PAUSE; + if (fc == (PAUSE_RX | PAUSE_TX)) + lc->advertising |= ADVERTISED_PAUSE; + } + phy->ops->advertise(phy, lc->advertising); + + if (lc->autoneg == AUTONEG_DISABLE) { + lc->speed = lc->requested_speed; + lc->duplex = lc->requested_duplex; + lc->fc = (unsigned char)fc; + mac->ops->set_speed_duplex_fc(mac, lc->speed, + lc->duplex, fc); + /* Also disables autoneg */ + phy->ops->set_speed_duplex(phy, lc->speed, lc->duplex); + phy->ops->reset(phy, 0); + } else + phy->ops->autoneg_enable(phy); /* also resets PHY */ + } else { + mac->ops->set_speed_duplex_fc(mac, -1, -1, fc); + lc->fc = (unsigned char)fc; + phy->ops->reset(phy, 0); + } + return 0; +} + +/* + * External interrupt handler for boards using elmer0. + */ +int elmer0_ext_intr_handler(adapter_t *adapter) +{ + struct cphy *phy; + int phy_cause; + u32 cause; + + t1_tpi_read(adapter, A_ELMER0_INT_CAUSE, &cause); + + switch (board_info(adapter)->board) { + case CHBT_BOARD_N210: + case CHBT_BOARD_N110: + if (cause & ELMER0_GP_BIT6) { /* Marvell 88x2010 interrupt */ + phy = adapter->port[0].phy; + phy_cause = phy->ops->interrupt_handler(phy); + if (phy_cause & cphy_cause_link_change) + link_changed(adapter, 0); + } + break; + } + t1_tpi_write(adapter, A_ELMER0_INT_CAUSE, cause); + return 0; +} + +/* Enables all interrupts. */ +void t1_interrupts_enable(adapter_t *adapter) +{ + unsigned int i; + u32 pl_intr; + + adapter->slow_intr_mask = F_PL_INTR_SGE_ERR; + + t1_sge_intr_enable(adapter->sge); + if (adapter->espi) { + adapter->slow_intr_mask |= F_PL_INTR_ESPI; + t1_espi_intr_enable(adapter->espi); + } + + /* Enable MAC/PHY interrupts for each port. */ + for_each_port(adapter, i) { + adapter->port[i].mac->ops->interrupt_enable(adapter->port[i].mac); + adapter->port[i].phy->ops->interrupt_enable(adapter->port[i].phy); + } + + /* Enable PCIX & external chip interrupts on ASIC boards. */ + pl_intr = readl(adapter->regs + A_PL_ENABLE); + + /* PCI-X interrupts */ + pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, + 0xffffffff); + + adapter->slow_intr_mask |= F_PL_INTR_EXT | F_PL_INTR_PCIX; + pl_intr |= F_PL_INTR_EXT | F_PL_INTR_PCIX; + writel(pl_intr, adapter->regs + A_PL_ENABLE); +} + +/* Disables all interrupts. */ +void t1_interrupts_disable(adapter_t* adapter) +{ + unsigned int i; + + t1_sge_intr_disable(adapter->sge); + if (adapter->espi) + t1_espi_intr_disable(adapter->espi); + + /* Disable MAC/PHY interrupts for each port. */ + for_each_port(adapter, i) { + adapter->port[i].mac->ops->interrupt_disable(adapter->port[i].mac); + adapter->port[i].phy->ops->interrupt_disable(adapter->port[i].phy); + } + + /* Disable PCIX & external chip interrupts. */ + writel(0, adapter->regs + A_PL_ENABLE); + + /* PCI-X interrupts */ + pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, 0); + + adapter->slow_intr_mask = 0; +} + +/* Clears all interrupts */ +void t1_interrupts_clear(adapter_t* adapter) +{ + unsigned int i; + u32 pl_intr; + + + t1_sge_intr_clear(adapter->sge); + if (adapter->espi) + t1_espi_intr_clear(adapter->espi); + + /* Clear MAC/PHY interrupts for each port. */ + for_each_port(adapter, i) { + adapter->port[i].mac->ops->interrupt_clear(adapter->port[i].mac); + adapter->port[i].phy->ops->interrupt_clear(adapter->port[i].phy); + } + + /* Enable interrupts for external devices. */ + pl_intr = readl(adapter->regs + A_PL_CAUSE); + + writel(pl_intr | F_PL_INTR_EXT | F_PL_INTR_PCIX, + adapter->regs + A_PL_CAUSE); + + /* PCI-X interrupts */ + pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, 0xffffffff); +} + +/* + * Slow path interrupt handler for ASICs. + */ +int t1_slow_intr_handler(adapter_t *adapter) +{ + u32 cause = readl(adapter->regs + A_PL_CAUSE); + + cause &= adapter->slow_intr_mask; + if (!cause) + return 0; + if (cause & F_PL_INTR_SGE_ERR) + t1_sge_intr_error_handler(adapter->sge); + if (cause & F_PL_INTR_ESPI) + t1_espi_intr_handler(adapter->espi); + if (cause & F_PL_INTR_PCIX) + t1_pci_intr_handler(adapter); + if (cause & F_PL_INTR_EXT) + t1_elmer0_ext_intr(adapter); + + /* Clear the interrupts just processed. */ + writel(cause, adapter->regs + A_PL_CAUSE); + (void)readl(adapter->regs + A_PL_CAUSE); /* flush writes */ + return 1; +} + +/* Pause deadlock avoidance parameters */ +#define DROP_MSEC 16 +#define DROP_PKTS_CNT 1 + +static void set_csum_offload(adapter_t *adapter, u32 csum_bit, int enable) +{ + u32 val = readl(adapter->regs + A_TP_GLOBAL_CONFIG); + + if (enable) + val |= csum_bit; + else + val &= ~csum_bit; + writel(val, adapter->regs + A_TP_GLOBAL_CONFIG); +} + +void t1_tp_set_ip_checksum_offload(adapter_t *adapter, int enable) +{ + set_csum_offload(adapter, F_IP_CSUM, enable); +} + +void t1_tp_set_udp_checksum_offload(adapter_t *adapter, int enable) +{ + set_csum_offload(adapter, F_UDP_CSUM, enable); +} + +void t1_tp_set_tcp_checksum_offload(adapter_t *adapter, int enable) +{ + set_csum_offload(adapter, F_TCP_CSUM, enable); +} + +static void t1_tp_reset(adapter_t *adapter, unsigned int tp_clk) +{ + u32 val; + + val = F_TP_IN_CSPI_CPL | F_TP_IN_CSPI_CHECK_IP_CSUM | + F_TP_IN_CSPI_CHECK_TCP_CSUM | F_TP_IN_ESPI_ETHERNET; + val |= F_TP_IN_ESPI_CHECK_IP_CSUM | + F_TP_IN_ESPI_CHECK_TCP_CSUM; + writel(val, adapter->regs + A_TP_IN_CONFIG); + writel(F_TP_OUT_CSPI_CPL | + F_TP_OUT_ESPI_ETHERNET | + F_TP_OUT_ESPI_GENERATE_IP_CSUM | + F_TP_OUT_ESPI_GENERATE_TCP_CSUM, + adapter->regs + A_TP_OUT_CONFIG); + + val = readl(adapter->regs + A_TP_GLOBAL_CONFIG); + val &= ~(F_IP_CSUM | F_UDP_CSUM | F_TCP_CSUM); + writel(val, adapter->regs + A_TP_GLOBAL_CONFIG); + + /* + * Enable pause frame deadlock prevention. + */ + if (is_T2(adapter)) { + u32 drop_ticks = DROP_MSEC * (tp_clk / 1000); + + writel(F_ENABLE_TX_DROP | F_ENABLE_TX_ERROR | + V_DROP_TICKS_CNT(drop_ticks) | + V_NUM_PKTS_DROPPED(DROP_PKTS_CNT), + adapter->regs + A_TP_TX_DROP_CONFIG); + } + + writel(F_TP_RESET, adapter->regs + A_TP_RESET); +} + +int __devinit t1_get_board_rev(adapter_t *adapter, const struct board_info *bi, + struct adapter_params *p) +{ + p->chip_version = bi->chip_term; + if (p->chip_version == CHBT_TERM_T1 || + p->chip_version == CHBT_TERM_T2) { + u32 val = readl(adapter->regs + A_TP_PC_CONFIG); + + val = G_TP_PC_REV(val); + if (val == 2) + p->chip_revision = TERM_T1B; + else if (val == 3) + p->chip_revision = TERM_T2; + else + return -1; + } else + return -1; + return 0; +} + +/* + * Enable board components other than the Chelsio chip, such as external MAC + * and PHY. + */ +static int board_init(adapter_t *adapter, const struct board_info *bi) +{ + switch (bi->board) { + case CHBT_BOARD_N110: + case CHBT_BOARD_N210: + writel(V_TPIPAR(0xf), adapter->regs + A_TPI_PAR); + t1_tpi_write(adapter, A_ELMER0_GPO, 0x800); + break; + } + return 0; +} + +/* + * Initialize and configure the Terminator HW modules. Note that external + * MAC and PHYs are initialized separately. + */ +int t1_init_hw_modules(adapter_t *adapter) +{ + int err = -EIO; + const struct board_info *bi = board_info(adapter); + + if (!bi->clock_mc4) { + u32 val = readl(adapter->regs + A_MC4_CFG); + + writel(val | F_READY | F_MC4_SLOW, adapter->regs + A_MC4_CFG); + writel(F_M_BUS_ENABLE | F_TCAM_RESET, + adapter->regs + A_MC5_CONFIG); + } + + if (adapter->espi && t1_espi_init(adapter->espi, bi->chip_mac, + bi->espi_nports)) + goto out_err; + + t1_tp_reset(adapter, bi->clock_core); + + err = t1_sge_configure(adapter->sge, &adapter->params.sge); + if (err) + goto out_err; + + err = 0; + out_err: + return err; +} + +/* + * Determine a card's PCI mode. + */ +static void __devinit get_pci_mode(adapter_t *adapter, struct chelsio_pci_params *p) +{ + static unsigned short speed_map[] = { 33, 66, 100, 133 }; + u32 pci_mode; + + pci_read_config_dword(adapter->pdev, A_PCICFG_MODE, &pci_mode); + p->speed = speed_map[G_PCI_MODE_CLK(pci_mode)]; + p->width = (pci_mode & F_PCI_MODE_64BIT) ? 64 : 32; + p->is_pcix = (pci_mode & F_PCI_MODE_PCIX) != 0; +} + +/* + * Release the structures holding the SW per-Terminator-HW-module state. + */ +void t1_free_sw_modules(adapter_t *adapter) +{ + unsigned int i; + + for_each_port(adapter, i) { + struct cmac *mac = adapter->port[i].mac; + struct cphy *phy = adapter->port[i].phy; + + if (mac) + mac->ops->destroy(mac); + if (phy) + phy->ops->destroy(phy); + } + + if (adapter->sge) + t1_sge_destroy(adapter->sge); + if (adapter->espi) + t1_espi_destroy(adapter->espi); +} + +static void __devinit init_link_config(struct link_config *lc, + const struct board_info *bi) +{ + lc->supported = bi->caps; + lc->requested_speed = lc->speed = SPEED_INVALID; + lc->requested_duplex = lc->duplex = DUPLEX_INVALID; + lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX; + if (lc->supported & SUPPORTED_Autoneg) { + lc->advertising = lc->supported; + lc->autoneg = AUTONEG_ENABLE; + lc->requested_fc |= PAUSE_AUTONEG; + } else { + lc->advertising = 0; + lc->autoneg = AUTONEG_DISABLE; + } +} + + +/* + * Allocate and initialize the data structures that hold the SW state of + * the Terminator HW modules. + */ +int __devinit t1_init_sw_modules(adapter_t *adapter, + const struct board_info *bi) +{ + unsigned int i; + + adapter->params.brd_info = bi; + adapter->params.nports = bi->port_number; + adapter->params.stats_update_period = bi->gmac->stats_update_period; + + adapter->sge = t1_sge_create(adapter, &adapter->params.sge); + if (!adapter->sge) { + CH_ERR("%s: SGE initialization failed\n", + adapter->name); + goto error; + } + + if (bi->espi_nports && !(adapter->espi = t1_espi_create(adapter))) { + CH_ERR("%s: ESPI initialization failed\n", + adapter->name); + goto error; + } + + board_init(adapter, bi); + bi->mdio_ops->init(adapter, bi); + if (bi->gphy->reset) + bi->gphy->reset(adapter); + if (bi->gmac->reset) + bi->gmac->reset(adapter); + + for_each_port(adapter, i) { + u8 hw_addr[6]; + struct cmac *mac; + int phy_addr = bi->mdio_phybaseaddr + i; + + adapter->port[i].phy = bi->gphy->create(adapter, phy_addr, + bi->mdio_ops); + if (!adapter->port[i].phy) { + CH_ERR("%s: PHY %d initialization failed\n", + adapter->name, i); + goto error; + } + + adapter->port[i].mac = mac = bi->gmac->create(adapter, i); + if (!mac) { + CH_ERR("%s: MAC %d initialization failed\n", + adapter->name, i); + goto error; + } + + /* + * Get the port's MAC addresses either from the EEPROM if one + * exists or the one hardcoded in the MAC. + */ + if (vpd_macaddress_get(adapter, i, hw_addr)) { + CH_ERR("%s: could not read MAC address from VPD ROM\n", + adapter->port[i].dev->name); + goto error; + } + memcpy(adapter->port[i].dev->dev_addr, hw_addr, ETH_ALEN); + init_link_config(&adapter->port[i].link_config, bi); + } + + get_pci_mode(adapter, &adapter->params.pci); + t1_interrupts_clear(adapter); + return 0; + + error: + t1_free_sw_modules(adapter); + return -1; +} diff --git a/drivers/net/chelsio/suni1x10gexp_regs.h b/drivers/net/chelsio/suni1x10gexp_regs.h new file mode 100644 index 000000000000..81816c2b708a --- /dev/null +++ b/drivers/net/chelsio/suni1x10gexp_regs.h @@ -0,0 +1,213 @@ +/***************************************************************************** + * * + * File: suni1x10gexp_regs.h * + * $Revision: 1.9 $ * + * $Date: 2005/06/22 00:17:04 $ * + * Description: * + * PMC/SIERRA (pm3393) MAC-PHY functionality. * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: PMC/SIERRA * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef _CXGB_SUNI1x10GEXP_REGS_H_ +#define _CXGB_SUNI1x10GEXP_REGS_H_ + +/******************************************************************************/ +/** S/UNI-1x10GE-XP REGISTER ADDRESS MAP **/ +/******************************************************************************/ +/* Refer to the Register Bit Masks bellow for the naming of each register and */ +/* to the S/UNI-1x10GE-XP Data Sheet for the signification of each bit */ +/******************************************************************************/ + +#define SUNI1x10GEXP_REG_DEVICE_STATUS 0x0004 +#define SUNI1x10GEXP_REG_MASTER_INTERRUPT_STATUS 0x000D +#define SUNI1x10GEXP_REG_GLOBAL_INTERRUPT_ENABLE 0x000E +#define SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_ENABLE 0x0102 +#define SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_STATUS 0x0104 +#define SUNI1x10GEXP_REG_RXXG_CONFIG_1 0x2040 +#define SUNI1x10GEXP_REG_RXXG_CONFIG_3 0x2042 +#define SUNI1x10GEXP_REG_RXXG_INTERRUPT 0x2043 +#define SUNI1x10GEXP_REG_RXXG_MAX_FRAME_LENGTH 0x2045 +#define SUNI1x10GEXP_REG_RXXG_SA_15_0 0x2046 +#define SUNI1x10GEXP_REG_RXXG_SA_31_16 0x2047 +#define SUNI1x10GEXP_REG_RXXG_SA_47_32 0x2048 +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_LOW 0x204D +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_MID 0x204E +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_HIGH 0x204F +#define SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_LOW 0x206A +#define SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDLOW 0x206B +#define SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDHIGH 0x206C +#define SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_HIGH 0x206D +#define SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_0 0x206E +#define SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_2 0x2070 +#define SUNI1x10GEXP_REG_XRF_INTERRUPT_ENABLE 0x2088 +#define SUNI1x10GEXP_REG_XRF_INTERRUPT_STATUS 0x2089 +#define SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_ENABLE 0x208B +#define SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_STATUS 0x208C +#define SUNI1x10GEXP_REG_RXOAM_INTERRUPT_ENABLE 0x20C7 +#define SUNI1x10GEXP_REG_RXOAM_INTERRUPT_STATUS 0x20C8 +#define SUNI1x10GEXP_REG_MSTAT_CONTROL 0x2100 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_0 0x2101 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_1 0x2102 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_2 0x2103 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_3 0x2104 +#define SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_0 0x2105 +#define SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_1 0x2106 +#define SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_2 0x2107 +#define SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_3 0x2108 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_0_LOW 0x2110 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_1_LOW 0x2114 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_4_LOW 0x2120 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_5_LOW 0x2124 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_6_LOW 0x2128 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_8_LOW 0x2130 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_10_LOW 0x2138 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_11_LOW 0x213C +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_12_LOW 0x2140 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_13_LOW 0x2144 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_15_LOW 0x214C +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_16_LOW 0x2150 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_17_LOW 0x2154 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_18_LOW 0x2158 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_33_LOW 0x2194 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_35_LOW 0x219C +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_36_LOW 0x21A0 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_38_LOW 0x21A8 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_40_LOW 0x21B0 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_42_LOW 0x21B8 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_43_LOW 0x21BC +#define SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_ENABLE 0x2209 +#define SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_INTERRUPT 0x220A +#define SUNI1x10GEXP_REG_PL4ODP_INTERRUPT_MASK 0x2282 +#define SUNI1x10GEXP_REG_PL4ODP_INTERRUPT 0x2283 +#define SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_STATUS 0x2300 +#define SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_CHANGE 0x2301 +#define SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_MASK 0x2302 +#define SUNI1x10GEXP_REG_TXXG_CONFIG_1 0x3040 +#define SUNI1x10GEXP_REG_TXXG_CONFIG_3 0x3042 +#define SUNI1x10GEXP_REG_TXXG_INTERRUPT 0x3043 +#define SUNI1x10GEXP_REG_TXXG_MAX_FRAME_SIZE 0x3045 +#define SUNI1x10GEXP_REG_TXXG_SA_15_0 0x3047 +#define SUNI1x10GEXP_REG_TXXG_SA_31_16 0x3048 +#define SUNI1x10GEXP_REG_TXXG_SA_47_32 0x3049 +#define SUNI1x10GEXP_REG_XTEF_INTERRUPT_STATUS 0x3084 +#define SUNI1x10GEXP_REG_XTEF_INTERRUPT_ENABLE 0x3085 +#define SUNI1x10GEXP_REG_TXOAM_INTERRUPT_ENABLE 0x30C6 +#define SUNI1x10GEXP_REG_TXOAM_INTERRUPT_STATUS 0x30C7 +#define SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_ENABLE 0x320C +#define SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_INDICATION 0x320D +#define SUNI1x10GEXP_REG_PL4IDU_INTERRUPT_MASK 0x3282 +#define SUNI1x10GEXP_REG_PL4IDU_INTERRUPT 0x3283 + +/******************************************************************************/ +/* -- End register offset definitions -- */ +/******************************************************************************/ + +/******************************************************************************/ +/** SUNI-1x10GE-XP REGISTER BIT MASKS **/ +/******************************************************************************/ + +/*---------------------------------------------------------------------------- + * Register 0x0004: S/UNI-1x10GE-XP Device Status + * Bit 9 TOP_SXRA_EXPIRED + * Bit 8 TOP_MDIO_BUSY + * Bit 7 TOP_DTRB + * Bit 6 TOP_EXPIRED + * Bit 5 TOP_PAUSED + * Bit 4 TOP_PL4_ID_DOOL + * Bit 3 TOP_PL4_IS_DOOL + * Bit 2 TOP_PL4_ID_ROOL + * Bit 1 TOP_PL4_IS_ROOL + * Bit 0 TOP_PL4_OUT_ROOL + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_TOP_SXRA_EXPIRED 0x0200 +#define SUNI1x10GEXP_BITMSK_TOP_EXPIRED 0x0040 +#define SUNI1x10GEXP_BITMSK_TOP_PL4_ID_DOOL 0x0010 +#define SUNI1x10GEXP_BITMSK_TOP_PL4_IS_DOOL 0x0008 +#define SUNI1x10GEXP_BITMSK_TOP_PL4_ID_ROOL 0x0004 +#define SUNI1x10GEXP_BITMSK_TOP_PL4_IS_ROOL 0x0002 +#define SUNI1x10GEXP_BITMSK_TOP_PL4_OUT_ROOL 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x000E:PM3393 Global interrupt enable + * Bit 15 TOP_INTE + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_TOP_INTE 0x8000 + +/*---------------------------------------------------------------------------- + * Register 0x2040: RXXG Configuration 1 + * Bit 15 RXXG_RXEN + * Bit 14 RXXG_ROCF + * Bit 13 RXXG_PAD_STRIP + * Bit 10 RXXG_PUREP + * Bit 9 RXXG_LONGP + * Bit 8 RXXG_PARF + * Bit 7 RXXG_FLCHK + * Bit 5 RXXG_PASS_CTRL + * Bit 3 RXXG_CRC_STRIP + * Bit 2-0 RXXG_MIFG + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_RXXG_RXEN 0x8000 +#define SUNI1x10GEXP_BITMSK_RXXG_PUREP 0x0400 +#define SUNI1x10GEXP_BITMSK_RXXG_FLCHK 0x0080 +#define SUNI1x10GEXP_BITMSK_RXXG_CRC_STRIP 0x0008 + +/*---------------------------------------------------------------------------- + * Register 0x2070: RXXG Address Filter Control 2 + * Bit 1 RXXG_PMODE + * Bit 0 RXXG_MHASH_EN + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_RXXG_PMODE 0x0002 +#define SUNI1x10GEXP_BITMSK_RXXG_MHASH_EN 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x2100: MSTAT Control + * Bit 2 MSTAT_WRITE + * Bit 1 MSTAT_CLEAR + * Bit 0 MSTAT_SNAP + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_MSTAT_CLEAR 0x0002 +#define SUNI1x10GEXP_BITMSK_MSTAT_SNAP 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x3040: TXXG Configuration Register 1 + * Bit 15 TXXG_TXEN0 + * Bit 13 TXXG_HOSTPAUSE + * Bit 12-7 TXXG_IPGT + * Bit 5 TXXG_32BIT_ALIGN + * Bit 4 TXXG_CRCEN + * Bit 3 TXXG_FCTX + * Bit 2 TXXG_FCRX + * Bit 1 TXXG_PADEN + * Bit 0 TXXG_SPRE + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_TXXG_TXEN0 0x8000 +#define SUNI1x10GEXP_BITOFF_TXXG_IPGT 7 +#define SUNI1x10GEXP_BITMSK_TXXG_32BIT_ALIGN 0x0020 +#define SUNI1x10GEXP_BITMSK_TXXG_CRCEN 0x0010 +#define SUNI1x10GEXP_BITMSK_TXXG_FCTX 0x0008 +#define SUNI1x10GEXP_BITMSK_TXXG_FCRX 0x0004 +#define SUNI1x10GEXP_BITMSK_TXXG_PADEN 0x0002 + +#endif /* _CXGB_SUNI1x10GEXP_REGS_H_ */ + diff --git a/drivers/net/e100.c b/drivers/net/e100.c index d0fa2448761d..25cc20e415da 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -1,7 +1,7 @@ /******************************************************************************* - Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved. + Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free @@ -156,7 +156,7 @@ #define DRV_NAME "e100" #define DRV_EXT "-NAPI" -#define DRV_VERSION "3.4.8-k2"DRV_EXT +#define DRV_VERSION "3.4.14-k2"DRV_EXT #define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver" #define DRV_COPYRIGHT "Copyright(c) 1999-2005 Intel Corporation" #define PFX DRV_NAME ": " @@ -785,6 +785,7 @@ static int e100_eeprom_save(struct nic *nic, u16 start, u16 count) } #define E100_WAIT_SCB_TIMEOUT 20000 /* we might have to wait 100ms!!! */ +#define E100_WAIT_SCB_FAST 20 /* delay like the old code */ static inline int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr) { unsigned long flags; @@ -798,7 +799,7 @@ static inline int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr) if(likely(!readb(&nic->csr->scb.cmd_lo))) break; cpu_relax(); - if(unlikely(i > (E100_WAIT_SCB_TIMEOUT >> 1))) + if(unlikely(i > E100_WAIT_SCB_FAST)) udelay(5); } if(unlikely(i == E100_WAIT_SCB_TIMEOUT)) { @@ -902,8 +903,8 @@ static void mdio_write(struct net_device *netdev, int addr, int reg, int data) static void e100_get_defaults(struct nic *nic) { - struct param_range rfds = { .min = 16, .max = 256, .count = 64 }; - struct param_range cbs = { .min = 64, .max = 256, .count = 64 }; + struct param_range rfds = { .min = 16, .max = 256, .count = 256 }; + struct param_range cbs = { .min = 64, .max = 256, .count = 128 }; pci_read_config_byte(nic->pdev, PCI_REVISION_ID, &nic->rev_id); /* MAC type is encoded as rev ID; exception: ICH is treated as 82559 */ @@ -1006,25 +1007,213 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb) c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]); } +/********************************************************/ +/* Micro code for 8086:1229 Rev 8 */ +/********************************************************/ + +/* Parameter values for the D101M B-step */ +#define D101M_CPUSAVER_TIMER_DWORD 78 +#define D101M_CPUSAVER_BUNDLE_DWORD 65 +#define D101M_CPUSAVER_MIN_SIZE_DWORD 126 + +#define D101M_B_RCVBUNDLE_UCODE \ +{\ +0x00550215, 0xFFFF0437, 0xFFFFFFFF, 0x06A70789, 0xFFFFFFFF, 0x0558FFFF, \ +0x000C0001, 0x00101312, 0x000C0008, 0x00380216, \ +0x0010009C, 0x00204056, 0x002380CC, 0x00380056, \ +0x0010009C, 0x00244C0B, 0x00000800, 0x00124818, \ +0x00380438, 0x00000000, 0x00140000, 0x00380555, \ +0x00308000, 0x00100662, 0x00100561, 0x000E0408, \ +0x00134861, 0x000C0002, 0x00103093, 0x00308000, \ +0x00100624, 0x00100561, 0x000E0408, 0x00100861, \ +0x000C007E, 0x00222C21, 0x000C0002, 0x00103093, \ +0x00380C7A, 0x00080000, 0x00103090, 0x00380C7A, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x0010009C, 0x00244C2D, 0x00010004, 0x00041000, \ +0x003A0437, 0x00044010, 0x0038078A, 0x00000000, \ +0x00100099, 0x00206C7A, 0x0010009C, 0x00244C48, \ +0x00130824, 0x000C0001, 0x00101213, 0x00260C75, \ +0x00041000, 0x00010004, 0x00130826, 0x000C0006, \ +0x002206A8, 0x0013C926, 0x00101313, 0x003806A8, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00080600, 0x00101B10, 0x00050004, 0x00100826, \ +0x00101210, 0x00380C34, 0x00000000, 0x00000000, \ +0x0021155B, 0x00100099, 0x00206559, 0x0010009C, \ +0x00244559, 0x00130836, 0x000C0000, 0x00220C62, \ +0x000C0001, 0x00101B13, 0x00229C0E, 0x00210C0E, \ +0x00226C0E, 0x00216C0E, 0x0022FC0E, 0x00215C0E, \ +0x00214C0E, 0x00380555, 0x00010004, 0x00041000, \ +0x00278C67, 0x00040800, 0x00018100, 0x003A0437, \ +0x00130826, 0x000C0001, 0x00220559, 0x00101313, \ +0x00380559, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00130831, 0x0010090B, 0x00124813, \ +0x000CFF80, 0x002606AB, 0x00041000, 0x00010004, \ +0x003806A8, 0x00000000, 0x00000000, 0x00000000, \ +} + +/********************************************************/ +/* Micro code for 8086:1229 Rev 9 */ +/********************************************************/ + +/* Parameter values for the D101S */ +#define D101S_CPUSAVER_TIMER_DWORD 78 +#define D101S_CPUSAVER_BUNDLE_DWORD 67 +#define D101S_CPUSAVER_MIN_SIZE_DWORD 128 + +#define D101S_RCVBUNDLE_UCODE \ +{\ +0x00550242, 0xFFFF047E, 0xFFFFFFFF, 0x06FF0818, 0xFFFFFFFF, 0x05A6FFFF, \ +0x000C0001, 0x00101312, 0x000C0008, 0x00380243, \ +0x0010009C, 0x00204056, 0x002380D0, 0x00380056, \ +0x0010009C, 0x00244F8B, 0x00000800, 0x00124818, \ +0x0038047F, 0x00000000, 0x00140000, 0x003805A3, \ +0x00308000, 0x00100610, 0x00100561, 0x000E0408, \ +0x00134861, 0x000C0002, 0x00103093, 0x00308000, \ +0x00100624, 0x00100561, 0x000E0408, 0x00100861, \ +0x000C007E, 0x00222FA1, 0x000C0002, 0x00103093, \ +0x00380F90, 0x00080000, 0x00103090, 0x00380F90, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x0010009C, 0x00244FAD, 0x00010004, 0x00041000, \ +0x003A047E, 0x00044010, 0x00380819, 0x00000000, \ +0x00100099, 0x00206FFD, 0x0010009A, 0x0020AFFD, \ +0x0010009C, 0x00244FC8, 0x00130824, 0x000C0001, \ +0x00101213, 0x00260FF7, 0x00041000, 0x00010004, \ +0x00130826, 0x000C0006, 0x00220700, 0x0013C926, \ +0x00101313, 0x00380700, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00080600, 0x00101B10, 0x00050004, 0x00100826, \ +0x00101210, 0x00380FB6, 0x00000000, 0x00000000, \ +0x002115A9, 0x00100099, 0x002065A7, 0x0010009A, \ +0x0020A5A7, 0x0010009C, 0x002445A7, 0x00130836, \ +0x000C0000, 0x00220FE4, 0x000C0001, 0x00101B13, \ +0x00229F8E, 0x00210F8E, 0x00226F8E, 0x00216F8E, \ +0x0022FF8E, 0x00215F8E, 0x00214F8E, 0x003805A3, \ +0x00010004, 0x00041000, 0x00278FE9, 0x00040800, \ +0x00018100, 0x003A047E, 0x00130826, 0x000C0001, \ +0x002205A7, 0x00101313, 0x003805A7, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00130831, \ +0x0010090B, 0x00124813, 0x000CFF80, 0x00260703, \ +0x00041000, 0x00010004, 0x00380700 \ +} + +/********************************************************/ +/* Micro code for the 8086:1229 Rev F/10 */ +/********************************************************/ + +/* Parameter values for the D102 E-step */ +#define D102_E_CPUSAVER_TIMER_DWORD 42 +#define D102_E_CPUSAVER_BUNDLE_DWORD 54 +#define D102_E_CPUSAVER_MIN_SIZE_DWORD 46 + +#define D102_E_RCVBUNDLE_UCODE \ +{\ +0x007D028F, 0x0E4204F9, 0x14ED0C85, 0x14FA14E9, 0x0EF70E36, 0x1FFF1FFF, \ +0x00E014B9, 0x00000000, 0x00000000, 0x00000000, \ +0x00E014BD, 0x00000000, 0x00000000, 0x00000000, \ +0x00E014D5, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00E014C1, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00E014C8, 0x00000000, 0x00000000, 0x00000000, \ +0x00200600, 0x00E014EE, 0x00000000, 0x00000000, \ +0x0030FF80, 0x00940E46, 0x00038200, 0x00102000, \ +0x00E00E43, 0x00000000, 0x00000000, 0x00000000, \ +0x00300006, 0x00E014FB, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000, \ +0x00906EFD, 0x00900EFD, 0x00E00EF8, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +} + static void e100_load_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb) { - int i; - static const u32 ucode[UCODE_SIZE] = { - /* NFS packets are misinterpreted as TCO packets and - * incorrectly routed to the BMC over SMBus. This - * microcode patch checks the fragmented IP bit in the - * NFS/UDP header to distinguish between NFS and TCO. */ - 0x0EF70E36, 0x1FFF1FFF, 0x1FFF1FFF, 0x1FFF1FFF, 0x1FFF1FFF, - 0x1FFF1FFF, 0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000, - 0x00906EFD, 0x00900EFD, 0x00E00EF8, - }; +/* *INDENT-OFF* */ + static struct { + u32 ucode[UCODE_SIZE + 1]; + u8 mac; + u8 timer_dword; + u8 bundle_dword; + u8 min_size_dword; + } ucode_opts[] = { + { D101M_B_RCVBUNDLE_UCODE, + mac_82559_D101M, + D101M_CPUSAVER_TIMER_DWORD, + D101M_CPUSAVER_BUNDLE_DWORD, + D101M_CPUSAVER_MIN_SIZE_DWORD }, + { D101S_RCVBUNDLE_UCODE, + mac_82559_D101S, + D101S_CPUSAVER_TIMER_DWORD, + D101S_CPUSAVER_BUNDLE_DWORD, + D101S_CPUSAVER_MIN_SIZE_DWORD }, + { D102_E_RCVBUNDLE_UCODE, + mac_82551_F, + D102_E_CPUSAVER_TIMER_DWORD, + D102_E_CPUSAVER_BUNDLE_DWORD, + D102_E_CPUSAVER_MIN_SIZE_DWORD }, + { D102_E_RCVBUNDLE_UCODE, + mac_82551_10, + D102_E_CPUSAVER_TIMER_DWORD, + D102_E_CPUSAVER_BUNDLE_DWORD, + D102_E_CPUSAVER_MIN_SIZE_DWORD }, + { {0}, 0, 0, 0, 0} + }, *opts; +/* *INDENT-ON* */ + +#define BUNDLESMALL 1 +#define BUNDLEMAX 50 +#define INTDELAY 15000 + + opts = ucode_opts; + + /* do not load u-code for ICH devices */ + if (nic->flags & ich) + return; + + /* Search for ucode match against h/w rev_id */ + while (opts->mac) { + if (nic->mac == opts->mac) { + int i; + u32 *ucode = opts->ucode; + + /* Insert user-tunable settings */ + ucode[opts->timer_dword] &= 0xFFFF0000; + ucode[opts->timer_dword] |= + (u16) INTDELAY; + ucode[opts->bundle_dword] &= 0xFFFF0000; + ucode[opts->bundle_dword] |= (u16) BUNDLEMAX; + ucode[opts->min_size_dword] &= 0xFFFF0000; + ucode[opts->min_size_dword] |= + (BUNDLESMALL) ? 0xFFFF : 0xFF80; + + for(i = 0; i < UCODE_SIZE; i++) + cb->u.ucode[i] = cpu_to_le32(ucode[i]); + cb->command = cpu_to_le16(cb_ucode); + return; + } + opts++; + } - if(nic->mac == mac_82551_F || nic->mac == mac_82551_10) { - for(i = 0; i < UCODE_SIZE; i++) - cb->u.ucode[i] = cpu_to_le32(ucode[i]); - cb->command = cpu_to_le16(cb_ucode); - } else - cb->command = cpu_to_le16(cb_nop); + cb->command = cpu_to_le16(cb_nop); } static void e100_setup_iaaddr(struct nic *nic, struct cb *cb, @@ -1307,14 +1496,15 @@ static inline void e100_xmit_prepare(struct nic *nic, struct cb *cb, { cb->command = nic->tx_command; /* interrupt every 16 packets regardless of delay */ - if((nic->cbs_avail & ~15) == nic->cbs_avail) cb->command |= cb_i; + if((nic->cbs_avail & ~15) == nic->cbs_avail) + cb->command |= cpu_to_le16(cb_i); cb->u.tcb.tbd_array = cb->dma_addr + offsetof(struct cb, u.tcb.tbd); cb->u.tcb.tcb_byte_count = 0; cb->u.tcb.threshold = nic->tx_threshold; cb->u.tcb.tbd_count = 1; cb->u.tcb.tbd.buf_addr = cpu_to_le32(pci_map_single(nic->pdev, skb->data, skb->len, PCI_DMA_TODEVICE)); - // check for mapping failure? + /* check for mapping failure? */ cb->u.tcb.tbd.size = cpu_to_le16(skb->len); } @@ -1539,7 +1729,7 @@ static inline int e100_rx_indicate(struct nic *nic, struct rx *rx, /* Don't indicate if hardware indicates errors */ nic->net_stats.rx_dropped++; dev_kfree_skb_any(skb); - } else if(actual_size > nic->netdev->mtu + VLAN_ETH_HLEN) { + } else if(actual_size > ETH_DATA_LEN + VLAN_ETH_HLEN) { /* Don't indicate oversized frames */ nic->rx_over_length_errors++; nic->net_stats.rx_dropped++; @@ -1706,6 +1896,7 @@ static int e100_poll(struct net_device *netdev, int *budget) static void e100_netpoll(struct net_device *netdev) { struct nic *nic = netdev_priv(netdev); + e100_disable_irq(nic); e100_intr(nic->pdev->irq, netdev, NULL); e100_tx_clean(nic); @@ -2108,6 +2299,8 @@ static void e100_diag_test(struct net_device *netdev, } for(i = 0; i < E100_TEST_LEN; i++) test->flags |= data[i] ? ETH_TEST_FL_FAILED : 0; + + msleep_interruptible(4 * 1000); } static int e100_phys_id(struct net_device *netdev, u32 data) diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c new file mode 100644 index 000000000000..bf3440aa6c24 --- /dev/null +++ b/drivers/net/sis190.c @@ -0,0 +1,1843 @@ +/* + sis190.c: Silicon Integrated Systems SiS190 ethernet driver + + Copyright (c) 2003 K.M. Liu <kmliu@sis.com> + Copyright (c) 2003, 2004 Jeff Garzik <jgarzik@pobox.com> + Copyright (c) 2003, 2004, 2005 Francois Romieu <romieu@fr.zoreil.com> + + Based on r8169.c, tg3.c, 8139cp.c, skge.c, epic100.c and SiS 190/191 + genuine driver. + + This software may be used and distributed according to the terms of + the GNU General Public License (GPL), incorporated herein by reference. + Drivers based on or derived from this code fall under the GPL and must + retain the authorship, copyright and license notice. This file is not + a complete program and may only be used when the entire operating + system is licensed under the GPL. + + See the file COPYING in this distribution for more information. + + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/netdevice.h> +#include <linux/rtnetlink.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/pci.h> +#include <linux/mii.h> +#include <linux/delay.h> +#include <linux/crc32.h> +#include <linux/dma-mapping.h> +#include <asm/irq.h> + +#define net_drv(p, arg...) if (netif_msg_drv(p)) \ + printk(arg) +#define net_probe(p, arg...) if (netif_msg_probe(p)) \ + printk(arg) +#define net_link(p, arg...) if (netif_msg_link(p)) \ + printk(arg) +#define net_intr(p, arg...) if (netif_msg_intr(p)) \ + printk(arg) +#define net_tx_err(p, arg...) if (netif_msg_tx_err(p)) \ + printk(arg) + +#define PHY_MAX_ADDR 32 +#define PHY_ID_ANY 0x1f +#define MII_REG_ANY 0x1f + +#ifdef CONFIG_SIS190_NAPI +#define NAPI_SUFFIX "-NAPI" +#else +#define NAPI_SUFFIX "" +#endif + +#define DRV_VERSION "1.2" NAPI_SUFFIX +#define DRV_NAME "sis190" +#define SIS190_DRIVER_NAME DRV_NAME " Gigabit Ethernet driver " DRV_VERSION +#define PFX DRV_NAME ": " + +#ifdef CONFIG_SIS190_NAPI +#define sis190_rx_skb netif_receive_skb +#define sis190_rx_quota(count, quota) min(count, quota) +#else +#define sis190_rx_skb netif_rx +#define sis190_rx_quota(count, quota) count +#endif + +#define MAC_ADDR_LEN 6 + +#define NUM_TX_DESC 64 /* [8..1024] */ +#define NUM_RX_DESC 64 /* [8..8192] */ +#define TX_RING_BYTES (NUM_TX_DESC * sizeof(struct TxDesc)) +#define RX_RING_BYTES (NUM_RX_DESC * sizeof(struct RxDesc)) +#define RX_BUF_SIZE 1536 +#define RX_BUF_MASK 0xfff8 + +#define SIS190_REGS_SIZE 0x80 +#define SIS190_TX_TIMEOUT (6*HZ) +#define SIS190_PHY_TIMEOUT (10*HZ) +#define SIS190_MSG_DEFAULT (NETIF_MSG_DRV | NETIF_MSG_PROBE | \ + NETIF_MSG_LINK | NETIF_MSG_IFUP | \ + NETIF_MSG_IFDOWN) + +/* Enhanced PHY access register bit definitions */ +#define EhnMIIread 0x0000 +#define EhnMIIwrite 0x0020 +#define EhnMIIdataShift 16 +#define EhnMIIpmdShift 6 /* 7016 only */ +#define EhnMIIregShift 11 +#define EhnMIIreq 0x0010 +#define EhnMIInotDone 0x0010 + +/* Write/read MMIO register */ +#define SIS_W8(reg, val) writeb ((val), ioaddr + (reg)) +#define SIS_W16(reg, val) writew ((val), ioaddr + (reg)) +#define SIS_W32(reg, val) writel ((val), ioaddr + (reg)) +#define SIS_R8(reg) readb (ioaddr + (reg)) +#define SIS_R16(reg) readw (ioaddr + (reg)) +#define SIS_R32(reg) readl (ioaddr + (reg)) + +#define SIS_PCI_COMMIT() SIS_R32(IntrControl) + +enum sis190_registers { + TxControl = 0x00, + TxDescStartAddr = 0x04, + rsv0 = 0x08, // reserved + TxSts = 0x0c, // unused (Control/Status) + RxControl = 0x10, + RxDescStartAddr = 0x14, + rsv1 = 0x18, // reserved + RxSts = 0x1c, // unused + IntrStatus = 0x20, + IntrMask = 0x24, + IntrControl = 0x28, + IntrTimer = 0x2c, // unused (Interupt Timer) + PMControl = 0x30, // unused (Power Mgmt Control/Status) + rsv2 = 0x34, // reserved + ROMControl = 0x38, + ROMInterface = 0x3c, + StationControl = 0x40, + GMIIControl = 0x44, + GIoCR = 0x48, // unused (GMAC IO Compensation) + GIoCtrl = 0x4c, // unused (GMAC IO Control) + TxMacControl = 0x50, + TxLimit = 0x54, // unused (Tx MAC Timer/TryLimit) + RGDelay = 0x58, // unused (RGMII Tx Internal Delay) + rsv3 = 0x5c, // reserved + RxMacControl = 0x60, + RxMacAddr = 0x62, + RxHashTable = 0x68, + // Undocumented = 0x6c, + RxWolCtrl = 0x70, + RxWolData = 0x74, // unused (Rx WOL Data Access) + RxMPSControl = 0x78, // unused (Rx MPS Control) + rsv4 = 0x7c, // reserved +}; + +enum sis190_register_content { + /* IntrStatus */ + SoftInt = 0x40000000, // unused + Timeup = 0x20000000, // unused + PauseFrame = 0x00080000, // unused + MagicPacket = 0x00040000, // unused + WakeupFrame = 0x00020000, // unused + LinkChange = 0x00010000, + RxQEmpty = 0x00000080, + RxQInt = 0x00000040, + TxQ1Empty = 0x00000020, // unused + TxQ1Int = 0x00000010, + TxQ0Empty = 0x00000008, // unused + TxQ0Int = 0x00000004, + RxHalt = 0x00000002, + TxHalt = 0x00000001, + + /* {Rx/Tx}CmdBits */ + CmdReset = 0x10, + CmdRxEnb = 0x08, // unused + CmdTxEnb = 0x01, + RxBufEmpty = 0x01, // unused + + /* Cfg9346Bits */ + Cfg9346_Lock = 0x00, // unused + Cfg9346_Unlock = 0xc0, // unused + + /* RxMacControl */ + AcceptErr = 0x20, // unused + AcceptRunt = 0x10, // unused + AcceptBroadcast = 0x0800, + AcceptMulticast = 0x0400, + AcceptMyPhys = 0x0200, + AcceptAllPhys = 0x0100, + + /* RxConfigBits */ + RxCfgFIFOShift = 13, + RxCfgDMAShift = 8, // 0x1a in RxControl ? + + /* TxConfigBits */ + TxInterFrameGapShift = 24, + TxDMAShift = 8, /* DMA burst value (0-7) is shift this many bits */ + + /* StationControl */ + _1000bpsF = 0x1c00, + _1000bpsH = 0x0c00, + _100bpsF = 0x1800, + _100bpsH = 0x0800, + _10bpsF = 0x1400, + _10bpsH = 0x0400, + + LinkStatus = 0x02, // unused + FullDup = 0x01, // unused + + /* TBICSRBit */ + TBILinkOK = 0x02000000, // unused +}; + +struct TxDesc { + __le32 PSize; + __le32 status; + __le32 addr; + __le32 size; +}; + +struct RxDesc { + __le32 PSize; + __le32 status; + __le32 addr; + __le32 size; +}; + +enum _DescStatusBit { + /* _Desc.status */ + OWNbit = 0x80000000, // RXOWN/TXOWN + INTbit = 0x40000000, // RXINT/TXINT + CRCbit = 0x00020000, // CRCOFF/CRCEN + PADbit = 0x00010000, // PREADD/PADEN + /* _Desc.size */ + RingEnd = 0x80000000, + /* TxDesc.status */ + LSEN = 0x08000000, // TSO ? -- FR + IPCS = 0x04000000, + TCPCS = 0x02000000, + UDPCS = 0x01000000, + BSTEN = 0x00800000, + EXTEN = 0x00400000, + DEFEN = 0x00200000, + BKFEN = 0x00100000, + CRSEN = 0x00080000, + COLEN = 0x00040000, + THOL3 = 0x30000000, + THOL2 = 0x20000000, + THOL1 = 0x10000000, + THOL0 = 0x00000000, + /* RxDesc.status */ + IPON = 0x20000000, + TCPON = 0x10000000, + UDPON = 0x08000000, + Wakup = 0x00400000, + Magic = 0x00200000, + Pause = 0x00100000, + DEFbit = 0x00200000, + BCAST = 0x000c0000, + MCAST = 0x00080000, + UCAST = 0x00040000, + /* RxDesc.PSize */ + TAGON = 0x80000000, + RxDescCountMask = 0x7f000000, // multi-desc pkt when > 1 ? -- FR + ABORT = 0x00800000, + SHORT = 0x00400000, + LIMIT = 0x00200000, + MIIER = 0x00100000, + OVRUN = 0x00080000, + NIBON = 0x00040000, + COLON = 0x00020000, + CRCOK = 0x00010000, + RxSizeMask = 0x0000ffff + /* + * The asic could apparently do vlan, TSO, jumbo (sis191 only) and + * provide two (unused with Linux) Tx queues. No publically + * available documentation alas. + */ +}; + +enum sis190_eeprom_access_register_bits { + EECS = 0x00000001, // unused + EECLK = 0x00000002, // unused + EEDO = 0x00000008, // unused + EEDI = 0x00000004, // unused + EEREQ = 0x00000080, + EEROP = 0x00000200, + EEWOP = 0x00000100 // unused +}; + +/* EEPROM Addresses */ +enum sis190_eeprom_address { + EEPROMSignature = 0x00, + EEPROMCLK = 0x01, // unused + EEPROMInfo = 0x02, + EEPROMMACAddr = 0x03 +}; + +struct sis190_private { + void __iomem *mmio_addr; + struct pci_dev *pci_dev; + struct net_device_stats stats; + spinlock_t lock; + u32 rx_buf_sz; + u32 cur_rx; + u32 cur_tx; + u32 dirty_rx; + u32 dirty_tx; + dma_addr_t rx_dma; + dma_addr_t tx_dma; + struct RxDesc *RxDescRing; + struct TxDesc *TxDescRing; + struct sk_buff *Rx_skbuff[NUM_RX_DESC]; + struct sk_buff *Tx_skbuff[NUM_TX_DESC]; + struct work_struct phy_task; + struct timer_list timer; + u32 msg_enable; + struct mii_if_info mii_if; + struct list_head first_phy; +}; + +struct sis190_phy { + struct list_head list; + int phy_id; + u16 id[2]; + u16 status; + u8 type; +}; + +enum sis190_phy_type { + UNKNOWN = 0x00, + HOME = 0x01, + LAN = 0x02, + MIX = 0x03 +}; + +static struct mii_chip_info { + const char *name; + u16 id[2]; + unsigned int type; +} mii_chip_table[] = { + { "Broadcom PHY BCM5461", { 0x0020, 0x60c0 }, LAN }, + { "Agere PHY ET1101B", { 0x0282, 0xf010 }, LAN }, + { "Marvell PHY 88E1111", { 0x0141, 0x0cc0 }, LAN }, + { "Realtek PHY RTL8201", { 0x0000, 0x8200 }, LAN }, + { NULL, } +}; + +const static struct { + const char *name; + u8 version; /* depend on docs */ + u32 RxConfigMask; /* clear the bits supported by this chip */ +} sis_chip_info[] = { + { DRV_NAME, 0x00, 0xff7e1880, }, +}; + +static struct pci_device_id sis190_pci_tbl[] __devinitdata = { + { PCI_DEVICE(PCI_VENDOR_ID_SI, 0x0190), 0, 0, 0 }, + { 0, }, +}; + +MODULE_DEVICE_TABLE(pci, sis190_pci_tbl); + +static int rx_copybreak = 200; + +static struct { + u32 msg_enable; +} debug = { -1 }; + +MODULE_DESCRIPTION("SiS sis190 Gigabit Ethernet driver"); +module_param(rx_copybreak, int, 0); +MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames"); +module_param_named(debug, debug.msg_enable, int, 0); +MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., 16=all)"); +MODULE_AUTHOR("K.M. Liu <kmliu@sis.com>, Ueimor <romieu@fr.zoreil.com>"); +MODULE_VERSION(DRV_VERSION); +MODULE_LICENSE("GPL"); + +static const u32 sis190_intr_mask = + RxQEmpty | RxQInt | TxQ1Int | TxQ0Int | RxHalt | TxHalt; + +/* + * Maximum number of multicast addresses to filter (vs. Rx-all-multicast). + * The chips use a 64 element hash table based on the Ethernet CRC. + */ +static int multicast_filter_limit = 32; + +static void __mdio_cmd(void __iomem *ioaddr, u32 ctl) +{ + unsigned int i; + + SIS_W32(GMIIControl, ctl); + + msleep(1); + + for (i = 0; i < 100; i++) { + if (!(SIS_R32(GMIIControl) & EhnMIInotDone)) + break; + msleep(1); + } + + if (i > 999) + printk(KERN_ERR PFX "PHY command failed !\n"); +} + +static void mdio_write(void __iomem *ioaddr, int phy_id, int reg, int val) +{ + __mdio_cmd(ioaddr, EhnMIIreq | EhnMIIwrite | + (((u32) reg) << EhnMIIregShift) | (phy_id << EhnMIIpmdShift) | + (((u32) val) << EhnMIIdataShift)); +} + +static int mdio_read(void __iomem *ioaddr, int phy_id, int reg) +{ + __mdio_cmd(ioaddr, EhnMIIreq | EhnMIIread | + (((u32) reg) << EhnMIIregShift) | (phy_id << EhnMIIpmdShift)); + + return (u16) (SIS_R32(GMIIControl) >> EhnMIIdataShift); +} + +static void __mdio_write(struct net_device *dev, int phy_id, int reg, int val) +{ + struct sis190_private *tp = netdev_priv(dev); + + mdio_write(tp->mmio_addr, phy_id, reg, val); +} + +static int __mdio_read(struct net_device *dev, int phy_id, int reg) +{ + struct sis190_private *tp = netdev_priv(dev); + + return mdio_read(tp->mmio_addr, phy_id, reg); +} + +static u16 mdio_read_latched(void __iomem *ioaddr, int phy_id, int reg) +{ + mdio_read(ioaddr, phy_id, reg); + return mdio_read(ioaddr, phy_id, reg); +} + +static u16 __devinit sis190_read_eeprom(void __iomem *ioaddr, u32 reg) +{ + u16 data = 0xffff; + unsigned int i; + + if (!(SIS_R32(ROMControl) & 0x0002)) + return 0; + + SIS_W32(ROMInterface, EEREQ | EEROP | (reg << 10)); + + for (i = 0; i < 200; i++) { + if (!(SIS_R32(ROMInterface) & EEREQ)) { + data = (SIS_R32(ROMInterface) & 0xffff0000) >> 16; + break; + } + msleep(1); + } + + return data; +} + +static void sis190_irq_mask_and_ack(void __iomem *ioaddr) +{ + SIS_W32(IntrMask, 0x00); + SIS_W32(IntrStatus, 0xffffffff); + SIS_PCI_COMMIT(); +} + +static void sis190_asic_down(void __iomem *ioaddr) +{ + /* Stop the chip's Tx and Rx DMA processes. */ + + SIS_W32(TxControl, 0x1a00); + SIS_W32(RxControl, 0x1a00); + + sis190_irq_mask_and_ack(ioaddr); +} + +static void sis190_mark_as_last_descriptor(struct RxDesc *desc) +{ + desc->size |= cpu_to_le32(RingEnd); +} + +static inline void sis190_give_to_asic(struct RxDesc *desc, u32 rx_buf_sz) +{ + u32 eor = le32_to_cpu(desc->size) & RingEnd; + + desc->PSize = 0x0; + desc->size = cpu_to_le32((rx_buf_sz & RX_BUF_MASK) | eor); + wmb(); + desc->status = cpu_to_le32(OWNbit | INTbit); +} + +static inline void sis190_map_to_asic(struct RxDesc *desc, dma_addr_t mapping, + u32 rx_buf_sz) +{ + desc->addr = cpu_to_le32(mapping); + sis190_give_to_asic(desc, rx_buf_sz); +} + +static inline void sis190_make_unusable_by_asic(struct RxDesc *desc) +{ + desc->PSize = 0x0; + desc->addr = 0xdeadbeef; + desc->size &= cpu_to_le32(RingEnd); + wmb(); + desc->status = 0x0; +} + +static int sis190_alloc_rx_skb(struct pci_dev *pdev, struct sk_buff **sk_buff, + struct RxDesc *desc, u32 rx_buf_sz) +{ + struct sk_buff *skb; + dma_addr_t mapping; + int ret = 0; + + skb = dev_alloc_skb(rx_buf_sz); + if (!skb) + goto err_out; + + *sk_buff = skb; + + mapping = pci_map_single(pdev, skb->data, rx_buf_sz, + PCI_DMA_FROMDEVICE); + + sis190_map_to_asic(desc, mapping, rx_buf_sz); +out: + return ret; + +err_out: + ret = -ENOMEM; + sis190_make_unusable_by_asic(desc); + goto out; +} + +static u32 sis190_rx_fill(struct sis190_private *tp, struct net_device *dev, + u32 start, u32 end) +{ + u32 cur; + + for (cur = start; cur < end; cur++) { + int ret, i = cur % NUM_RX_DESC; + + if (tp->Rx_skbuff[i]) + continue; + + ret = sis190_alloc_rx_skb(tp->pci_dev, tp->Rx_skbuff + i, + tp->RxDescRing + i, tp->rx_buf_sz); + if (ret < 0) + break; + } + return cur - start; +} + +static inline int sis190_try_rx_copy(struct sk_buff **sk_buff, int pkt_size, + struct RxDesc *desc, int rx_buf_sz) +{ + int ret = -1; + + if (pkt_size < rx_copybreak) { + struct sk_buff *skb; + + skb = dev_alloc_skb(pkt_size + NET_IP_ALIGN); + if (skb) { + skb_reserve(skb, NET_IP_ALIGN); + eth_copy_and_sum(skb, sk_buff[0]->data, pkt_size, 0); + *sk_buff = skb; + sis190_give_to_asic(desc, rx_buf_sz); + ret = 0; + } + } + return ret; +} + +static inline int sis190_rx_pkt_err(u32 status, struct net_device_stats *stats) +{ +#define ErrMask (OVRUN | SHORT | LIMIT | MIIER | NIBON | COLON | ABORT) + + if ((status & CRCOK) && !(status & ErrMask)) + return 0; + + if (!(status & CRCOK)) + stats->rx_crc_errors++; + else if (status & OVRUN) + stats->rx_over_errors++; + else if (status & (SHORT | LIMIT)) + stats->rx_length_errors++; + else if (status & (MIIER | NIBON | COLON)) + stats->rx_frame_errors++; + + stats->rx_errors++; + return -1; +} + +static int sis190_rx_interrupt(struct net_device *dev, + struct sis190_private *tp, void __iomem *ioaddr) +{ + struct net_device_stats *stats = &tp->stats; + u32 rx_left, cur_rx = tp->cur_rx; + u32 delta, count; + + rx_left = NUM_RX_DESC + tp->dirty_rx - cur_rx; + rx_left = sis190_rx_quota(rx_left, (u32) dev->quota); + + for (; rx_left > 0; rx_left--, cur_rx++) { + unsigned int entry = cur_rx % NUM_RX_DESC; + struct RxDesc *desc = tp->RxDescRing + entry; + u32 status; + + if (desc->status & OWNbit) + break; + + status = le32_to_cpu(desc->PSize); + + // net_intr(tp, KERN_INFO "%s: Rx PSize = %08x.\n", dev->name, + // status); + + if (sis190_rx_pkt_err(status, stats) < 0) + sis190_give_to_asic(desc, tp->rx_buf_sz); + else { + struct sk_buff *skb = tp->Rx_skbuff[entry]; + int pkt_size = (status & RxSizeMask) - 4; + void (*pci_action)(struct pci_dev *, dma_addr_t, + size_t, int) = pci_dma_sync_single_for_device; + + if (unlikely(pkt_size > tp->rx_buf_sz)) { + net_intr(tp, KERN_INFO + "%s: (frag) status = %08x.\n", + dev->name, status); + stats->rx_dropped++; + stats->rx_length_errors++; + sis190_give_to_asic(desc, tp->rx_buf_sz); + continue; + } + + pci_dma_sync_single_for_cpu(tp->pci_dev, + le32_to_cpu(desc->addr), tp->rx_buf_sz, + PCI_DMA_FROMDEVICE); + + if (sis190_try_rx_copy(&skb, pkt_size, desc, + tp->rx_buf_sz)) { + pci_action = pci_unmap_single; + tp->Rx_skbuff[entry] = NULL; + sis190_make_unusable_by_asic(desc); + } + + pci_action(tp->pci_dev, le32_to_cpu(desc->addr), + tp->rx_buf_sz, PCI_DMA_FROMDEVICE); + + skb->dev = dev; + skb_put(skb, pkt_size); + skb->protocol = eth_type_trans(skb, dev); + + sis190_rx_skb(skb); + + dev->last_rx = jiffies; + stats->rx_packets++; + stats->rx_bytes += pkt_size; + if ((status & BCAST) == MCAST) + stats->multicast++; + } + } + count = cur_rx - tp->cur_rx; + tp->cur_rx = cur_rx; + + delta = sis190_rx_fill(tp, dev, tp->dirty_rx, tp->cur_rx); + if (!delta && count && netif_msg_intr(tp)) + printk(KERN_INFO "%s: no Rx buffer allocated.\n", dev->name); + tp->dirty_rx += delta; + + if (((tp->dirty_rx + NUM_RX_DESC) == tp->cur_rx) && netif_msg_intr(tp)) + printk(KERN_EMERG "%s: Rx buffers exhausted.\n", dev->name); + + return count; +} + +static void sis190_unmap_tx_skb(struct pci_dev *pdev, struct sk_buff *skb, + struct TxDesc *desc) +{ + unsigned int len; + + len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len; + + pci_unmap_single(pdev, le32_to_cpu(desc->addr), len, PCI_DMA_TODEVICE); + + memset(desc, 0x00, sizeof(*desc)); +} + +static void sis190_tx_interrupt(struct net_device *dev, + struct sis190_private *tp, void __iomem *ioaddr) +{ + u32 pending, dirty_tx = tp->dirty_tx; + /* + * It would not be needed if queueing was allowed to be enabled + * again too early (hint: think preempt and unclocked smp systems). + */ + unsigned int queue_stopped; + + smp_rmb(); + pending = tp->cur_tx - dirty_tx; + queue_stopped = (pending == NUM_TX_DESC); + + for (; pending; pending--, dirty_tx++) { + unsigned int entry = dirty_tx % NUM_TX_DESC; + struct TxDesc *txd = tp->TxDescRing + entry; + struct sk_buff *skb; + + if (le32_to_cpu(txd->status) & OWNbit) + break; + + skb = tp->Tx_skbuff[entry]; + + tp->stats.tx_packets++; + tp->stats.tx_bytes += skb->len; + + sis190_unmap_tx_skb(tp->pci_dev, skb, txd); + tp->Tx_skbuff[entry] = NULL; + dev_kfree_skb_irq(skb); + } + + if (tp->dirty_tx != dirty_tx) { + tp->dirty_tx = dirty_tx; + smp_wmb(); + if (queue_stopped) + netif_wake_queue(dev); + } +} + +/* + * The interrupt handler does all of the Rx thread work and cleans up after + * the Tx thread. + */ +static irqreturn_t sis190_interrupt(int irq, void *__dev, struct pt_regs *regs) +{ + struct net_device *dev = __dev; + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + unsigned int handled = 0; + u32 status; + + status = SIS_R32(IntrStatus); + + if ((status == 0xffffffff) || !status) + goto out; + + handled = 1; + + if (unlikely(!netif_running(dev))) { + sis190_asic_down(ioaddr); + goto out; + } + + SIS_W32(IntrStatus, status); + + // net_intr(tp, KERN_INFO "%s: status = %08x.\n", dev->name, status); + + if (status & LinkChange) { + net_intr(tp, KERN_INFO "%s: link change.\n", dev->name); + schedule_work(&tp->phy_task); + } + + if (status & RxQInt) + sis190_rx_interrupt(dev, tp, ioaddr); + + if (status & TxQ0Int) + sis190_tx_interrupt(dev, tp, ioaddr); +out: + return IRQ_RETVAL(handled); +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void sis190_netpoll(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + struct pci_dev *pdev = tp->pci_dev; + + disable_irq(pdev->irq); + sis190_interrupt(pdev->irq, dev, NULL); + enable_irq(pdev->irq); +} +#endif + +static void sis190_free_rx_skb(struct sis190_private *tp, + struct sk_buff **sk_buff, struct RxDesc *desc) +{ + struct pci_dev *pdev = tp->pci_dev; + + pci_unmap_single(pdev, le32_to_cpu(desc->addr), tp->rx_buf_sz, + PCI_DMA_FROMDEVICE); + dev_kfree_skb(*sk_buff); + *sk_buff = NULL; + sis190_make_unusable_by_asic(desc); +} + +static void sis190_rx_clear(struct sis190_private *tp) +{ + unsigned int i; + + for (i = 0; i < NUM_RX_DESC; i++) { + if (!tp->Rx_skbuff[i]) + continue; + sis190_free_rx_skb(tp, tp->Rx_skbuff + i, tp->RxDescRing + i); + } +} + +static void sis190_init_ring_indexes(struct sis190_private *tp) +{ + tp->dirty_tx = tp->dirty_rx = tp->cur_tx = tp->cur_rx = 0; +} + +static int sis190_init_ring(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + + sis190_init_ring_indexes(tp); + + memset(tp->Tx_skbuff, 0x0, NUM_TX_DESC * sizeof(struct sk_buff *)); + memset(tp->Rx_skbuff, 0x0, NUM_RX_DESC * sizeof(struct sk_buff *)); + + if (sis190_rx_fill(tp, dev, 0, NUM_RX_DESC) != NUM_RX_DESC) + goto err_rx_clear; + + sis190_mark_as_last_descriptor(tp->RxDescRing + NUM_RX_DESC - 1); + + return 0; + +err_rx_clear: + sis190_rx_clear(tp); + return -ENOMEM; +} + +static void sis190_set_rx_mode(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + unsigned long flags; + u32 mc_filter[2]; /* Multicast hash filter */ + u16 rx_mode; + + if (dev->flags & IFF_PROMISC) { + /* Unconditionally log net taps. */ + net_drv(tp, KERN_NOTICE "%s: Promiscuous mode enabled.\n", + dev->name); + rx_mode = + AcceptBroadcast | AcceptMulticast | AcceptMyPhys | + AcceptAllPhys; + mc_filter[1] = mc_filter[0] = 0xffffffff; + } else if ((dev->mc_count > multicast_filter_limit) || + (dev->flags & IFF_ALLMULTI)) { + /* Too many to filter perfectly -- accept all multicasts. */ + rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys; + mc_filter[1] = mc_filter[0] = 0xffffffff; + } else { + struct dev_mc_list *mclist; + unsigned int i; + + rx_mode = AcceptBroadcast | AcceptMyPhys; + mc_filter[1] = mc_filter[0] = 0; + for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; + i++, mclist = mclist->next) { + int bit_nr = + ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26; + mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); + rx_mode |= AcceptMulticast; + } + } + + spin_lock_irqsave(&tp->lock, flags); + + SIS_W16(RxMacControl, rx_mode | 0x2); + SIS_W32(RxHashTable, mc_filter[0]); + SIS_W32(RxHashTable + 4, mc_filter[1]); + + spin_unlock_irqrestore(&tp->lock, flags); +} + +static void sis190_soft_reset(void __iomem *ioaddr) +{ + SIS_W32(IntrControl, 0x8000); + SIS_PCI_COMMIT(); + msleep(1); + SIS_W32(IntrControl, 0x0); + sis190_asic_down(ioaddr); + msleep(1); +} + +static void sis190_hw_start(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + + sis190_soft_reset(ioaddr); + + SIS_W32(TxDescStartAddr, tp->tx_dma); + SIS_W32(RxDescStartAddr, tp->rx_dma); + + SIS_W32(IntrStatus, 0xffffffff); + SIS_W32(IntrMask, 0x0); + /* + * Default is 100Mbps. + * A bit strange: 100Mbps is 0x1801 elsewhere -- FR 2005/06/09 + */ + SIS_W16(StationControl, 0x1901); + SIS_W32(GMIIControl, 0x0); + SIS_W32(TxMacControl, 0x60); + SIS_W16(RxMacControl, 0x02); + SIS_W32(RxHashTable, 0x0); + SIS_W32(0x6c, 0x0); + SIS_W32(RxWolCtrl, 0x0); + SIS_W32(RxWolData, 0x0); + + SIS_PCI_COMMIT(); + + sis190_set_rx_mode(dev); + + /* Enable all known interrupts by setting the interrupt mask. */ + SIS_W32(IntrMask, sis190_intr_mask); + + SIS_W32(TxControl, 0x1a00 | CmdTxEnb); + SIS_W32(RxControl, 0x1a1d); + + netif_start_queue(dev); +} + +static void sis190_phy_task(void * data) +{ + struct net_device *dev = data; + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + int phy_id = tp->mii_if.phy_id; + u16 val; + + rtnl_lock(); + + val = mdio_read(ioaddr, phy_id, MII_BMCR); + if (val & BMCR_RESET) { + // FIXME: needlessly high ? -- FR 02/07/2005 + mod_timer(&tp->timer, jiffies + HZ/10); + } else if (!(mdio_read_latched(ioaddr, phy_id, MII_BMSR) & + BMSR_ANEGCOMPLETE)) { + net_link(tp, KERN_WARNING "%s: PHY reset until link up.\n", + dev->name); + mdio_write(ioaddr, phy_id, MII_BMCR, val | BMCR_RESET); + mod_timer(&tp->timer, jiffies + SIS190_PHY_TIMEOUT); + } else { + /* Rejoice ! */ + struct { + int val; + const char *msg; + u16 ctl; + } reg31[] = { + { LPA_1000XFULL | LPA_SLCT, + "1000 Mbps Full Duplex", + 0x01 | _1000bpsF }, + { LPA_1000XHALF | LPA_SLCT, + "1000 Mbps Half Duplex", + 0x01 | _1000bpsH }, + { LPA_100FULL, + "100 Mbps Full Duplex", + 0x01 | _100bpsF }, + { LPA_100HALF, + "100 Mbps Half Duplex", + 0x01 | _100bpsH }, + { LPA_10FULL, + "10 Mbps Full Duplex", + 0x01 | _10bpsF }, + { LPA_10HALF, + "10 Mbps Half Duplex", + 0x01 | _10bpsH }, + { 0, "unknown", 0x0000 } + }, *p; + u16 adv; + + val = mdio_read(ioaddr, phy_id, 0x1f); + net_link(tp, KERN_INFO "%s: mii ext = %04x.\n", dev->name, val); + + val = mdio_read(ioaddr, phy_id, MII_LPA); + adv = mdio_read(ioaddr, phy_id, MII_ADVERTISE); + net_link(tp, KERN_INFO "%s: mii lpa = %04x adv = %04x.\n", + dev->name, val, adv); + + val &= adv; + + for (p = reg31; p->ctl; p++) { + if ((val & p->val) == p->val) + break; + } + if (p->ctl) + SIS_W16(StationControl, p->ctl); + net_link(tp, KERN_INFO "%s: link on %s mode.\n", dev->name, + p->msg); + netif_carrier_on(dev); + } + + rtnl_unlock(); +} + +static void sis190_phy_timer(unsigned long __opaque) +{ + struct net_device *dev = (struct net_device *)__opaque; + struct sis190_private *tp = netdev_priv(dev); + + if (likely(netif_running(dev))) + schedule_work(&tp->phy_task); +} + +static inline void sis190_delete_timer(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + + del_timer_sync(&tp->timer); +} + +static inline void sis190_request_timer(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + struct timer_list *timer = &tp->timer; + + init_timer(timer); + timer->expires = jiffies + SIS190_PHY_TIMEOUT; + timer->data = (unsigned long)dev; + timer->function = sis190_phy_timer; + add_timer(timer); +} + +static void sis190_set_rxbufsize(struct sis190_private *tp, + struct net_device *dev) +{ + unsigned int mtu = dev->mtu; + + tp->rx_buf_sz = (mtu > RX_BUF_SIZE) ? mtu + ETH_HLEN + 8 : RX_BUF_SIZE; + /* RxDesc->size has a licence to kill the lower bits */ + if (tp->rx_buf_sz & 0x07) { + tp->rx_buf_sz += 8; + tp->rx_buf_sz &= RX_BUF_MASK; + } +} + +static int sis190_open(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + struct pci_dev *pdev = tp->pci_dev; + int rc = -ENOMEM; + + sis190_set_rxbufsize(tp, dev); + + /* + * Rx and Tx descriptors need 256 bytes alignment. + * pci_alloc_consistent() guarantees a stronger alignment. + */ + tp->TxDescRing = pci_alloc_consistent(pdev, TX_RING_BYTES, &tp->tx_dma); + if (!tp->TxDescRing) + goto out; + + tp->RxDescRing = pci_alloc_consistent(pdev, RX_RING_BYTES, &tp->rx_dma); + if (!tp->RxDescRing) + goto err_free_tx_0; + + rc = sis190_init_ring(dev); + if (rc < 0) + goto err_free_rx_1; + + INIT_WORK(&tp->phy_task, sis190_phy_task, dev); + + sis190_request_timer(dev); + + rc = request_irq(dev->irq, sis190_interrupt, SA_SHIRQ, dev->name, dev); + if (rc < 0) + goto err_release_timer_2; + + sis190_hw_start(dev); +out: + return rc; + +err_release_timer_2: + sis190_delete_timer(dev); + sis190_rx_clear(tp); +err_free_rx_1: + pci_free_consistent(tp->pci_dev, RX_RING_BYTES, tp->RxDescRing, + tp->rx_dma); +err_free_tx_0: + pci_free_consistent(tp->pci_dev, TX_RING_BYTES, tp->TxDescRing, + tp->tx_dma); + goto out; +} + +static void sis190_tx_clear(struct sis190_private *tp) +{ + unsigned int i; + + for (i = 0; i < NUM_TX_DESC; i++) { + struct sk_buff *skb = tp->Tx_skbuff[i]; + + if (!skb) + continue; + + sis190_unmap_tx_skb(tp->pci_dev, skb, tp->TxDescRing + i); + tp->Tx_skbuff[i] = NULL; + dev_kfree_skb(skb); + + tp->stats.tx_dropped++; + } + tp->cur_tx = tp->dirty_tx = 0; +} + +static void sis190_down(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + unsigned int poll_locked = 0; + + sis190_delete_timer(dev); + + netif_stop_queue(dev); + + flush_scheduled_work(); + + do { + spin_lock_irq(&tp->lock); + + sis190_asic_down(ioaddr); + + spin_unlock_irq(&tp->lock); + + synchronize_irq(dev->irq); + + if (!poll_locked) { + netif_poll_disable(dev); + poll_locked++; + } + + synchronize_sched(); + + } while (SIS_R32(IntrMask)); + + sis190_tx_clear(tp); + sis190_rx_clear(tp); +} + +static int sis190_close(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + struct pci_dev *pdev = tp->pci_dev; + + sis190_down(dev); + + free_irq(dev->irq, dev); + + netif_poll_enable(dev); + + pci_free_consistent(pdev, TX_RING_BYTES, tp->TxDescRing, tp->tx_dma); + pci_free_consistent(pdev, RX_RING_BYTES, tp->RxDescRing, tp->rx_dma); + + tp->TxDescRing = NULL; + tp->RxDescRing = NULL; + + return 0; +} + +static int sis190_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + u32 len, entry, dirty_tx; + struct TxDesc *desc; + dma_addr_t mapping; + + if (unlikely(skb->len < ETH_ZLEN)) { + skb = skb_padto(skb, ETH_ZLEN); + if (!skb) { + tp->stats.tx_dropped++; + goto out; + } + len = ETH_ZLEN; + } else { + len = skb->len; + } + + entry = tp->cur_tx % NUM_TX_DESC; + desc = tp->TxDescRing + entry; + + if (unlikely(le32_to_cpu(desc->status) & OWNbit)) { + netif_stop_queue(dev); + net_tx_err(tp, KERN_ERR PFX + "%s: BUG! Tx Ring full when queue awake!\n", + dev->name); + return NETDEV_TX_BUSY; + } + + mapping = pci_map_single(tp->pci_dev, skb->data, len, PCI_DMA_TODEVICE); + + tp->Tx_skbuff[entry] = skb; + + desc->PSize = cpu_to_le32(len); + desc->addr = cpu_to_le32(mapping); + + desc->size = cpu_to_le32(len); + if (entry == (NUM_TX_DESC - 1)) + desc->size |= cpu_to_le32(RingEnd); + + wmb(); + + desc->status = cpu_to_le32(OWNbit | INTbit | DEFbit | CRCbit | PADbit); + + tp->cur_tx++; + + smp_wmb(); + + SIS_W32(TxControl, 0x1a00 | CmdReset | CmdTxEnb); + + dev->trans_start = jiffies; + + dirty_tx = tp->dirty_tx; + if ((tp->cur_tx - NUM_TX_DESC) == dirty_tx) { + netif_stop_queue(dev); + smp_rmb(); + if (dirty_tx != tp->dirty_tx) + netif_wake_queue(dev); + } +out: + return NETDEV_TX_OK; +} + +static struct net_device_stats *sis190_get_stats(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + + return &tp->stats; +} + +static void sis190_free_phy(struct list_head *first_phy) +{ + struct sis190_phy *cur, *next; + + list_for_each_entry_safe(cur, next, first_phy, list) { + kfree(cur); + } +} + +/** + * sis190_default_phy - Select default PHY for sis190 mac. + * @dev: the net device to probe for + * + * Select first detected PHY with link as default. + * If no one is link on, select PHY whose types is HOME as default. + * If HOME doesn't exist, select LAN. + */ +static u16 sis190_default_phy(struct net_device *dev) +{ + struct sis190_phy *phy, *phy_home, *phy_default, *phy_lan; + struct sis190_private *tp = netdev_priv(dev); + struct mii_if_info *mii_if = &tp->mii_if; + void __iomem *ioaddr = tp->mmio_addr; + u16 status; + + phy_home = phy_default = phy_lan = NULL; + + list_for_each_entry(phy, &tp->first_phy, list) { + status = mdio_read_latched(ioaddr, phy->phy_id, MII_BMSR); + + // Link ON & Not select default PHY & not ghost PHY. + if ((status & BMSR_LSTATUS) && + !phy_default && + (phy->type != UNKNOWN)) { + phy_default = phy; + } else { + status = mdio_read(ioaddr, phy->phy_id, MII_BMCR); + mdio_write(ioaddr, phy->phy_id, MII_BMCR, + status | BMCR_ANENABLE | BMCR_ISOLATE); + if (phy->type == HOME) + phy_home = phy; + else if (phy->type == LAN) + phy_lan = phy; + } + } + + if (!phy_default) { + if (phy_home) + phy_default = phy_home; + else if (phy_lan) + phy_default = phy_lan; + else + phy_default = list_entry(&tp->first_phy, + struct sis190_phy, list); + } + + if (mii_if->phy_id != phy_default->phy_id) { + mii_if->phy_id = phy_default->phy_id; + net_probe(tp, KERN_INFO + "%s: Using transceiver at address %d as default.\n", + pci_name(tp->pci_dev), mii_if->phy_id); + } + + status = mdio_read(ioaddr, mii_if->phy_id, MII_BMCR); + status &= (~BMCR_ISOLATE); + + mdio_write(ioaddr, mii_if->phy_id, MII_BMCR, status); + status = mdio_read_latched(ioaddr, mii_if->phy_id, MII_BMSR); + + return status; +} + +static void sis190_init_phy(struct net_device *dev, struct sis190_private *tp, + struct sis190_phy *phy, unsigned int phy_id, + u16 mii_status) +{ + void __iomem *ioaddr = tp->mmio_addr; + struct mii_chip_info *p; + + INIT_LIST_HEAD(&phy->list); + phy->status = mii_status; + phy->phy_id = phy_id; + + phy->id[0] = mdio_read(ioaddr, phy_id, MII_PHYSID1); + phy->id[1] = mdio_read(ioaddr, phy_id, MII_PHYSID2); + + for (p = mii_chip_table; p->type; p++) { + if ((p->id[0] == phy->id[0]) && + (p->id[1] == (phy->id[1] & 0xfff0))) { + break; + } + } + + if (p->id[1]) { + phy->type = (p->type == MIX) ? + ((mii_status & (BMSR_100FULL | BMSR_100HALF)) ? + LAN : HOME) : p->type; + } else + phy->type = UNKNOWN; + + net_probe(tp, KERN_INFO "%s: %s transceiver at address %d.\n", + pci_name(tp->pci_dev), + (phy->type == UNKNOWN) ? "Unknown PHY" : p->name, phy_id); +} + +/** + * sis190_mii_probe - Probe MII PHY for sis190 + * @dev: the net device to probe for + * + * Search for total of 32 possible mii phy addresses. + * Identify and set current phy if found one, + * return error if it failed to found. + */ +static int __devinit sis190_mii_probe(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + struct mii_if_info *mii_if = &tp->mii_if; + void __iomem *ioaddr = tp->mmio_addr; + int phy_id; + int rc = 0; + + INIT_LIST_HEAD(&tp->first_phy); + + for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) { + struct sis190_phy *phy; + u16 status; + + status = mdio_read_latched(ioaddr, phy_id, MII_BMSR); + + // Try next mii if the current one is not accessible. + if (status == 0xffff || status == 0x0000) + continue; + + phy = kmalloc(sizeof(*phy), GFP_KERNEL); + if (!phy) { + sis190_free_phy(&tp->first_phy); + rc = -ENOMEM; + goto out; + } + + sis190_init_phy(dev, tp, phy, phy_id, status); + + list_add(&tp->first_phy, &phy->list); + } + + if (list_empty(&tp->first_phy)) { + net_probe(tp, KERN_INFO "%s: No MII transceivers found!\n", + pci_name(tp->pci_dev)); + rc = -EIO; + goto out; + } + + /* Select default PHY for mac */ + sis190_default_phy(dev); + + mii_if->dev = dev; + mii_if->mdio_read = __mdio_read; + mii_if->mdio_write = __mdio_write; + mii_if->phy_id_mask = PHY_ID_ANY; + mii_if->reg_num_mask = MII_REG_ANY; +out: + return rc; +} + +static void __devexit sis190_mii_remove(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + + sis190_free_phy(&tp->first_phy); +} + +static void sis190_release_board(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct sis190_private *tp = netdev_priv(dev); + + iounmap(tp->mmio_addr); + pci_release_regions(pdev); + pci_disable_device(pdev); + free_netdev(dev); +} + +static struct net_device * __devinit sis190_init_board(struct pci_dev *pdev) +{ + struct sis190_private *tp; + struct net_device *dev; + void __iomem *ioaddr; + int rc; + + dev = alloc_etherdev(sizeof(*tp)); + if (!dev) { + net_drv(&debug, KERN_ERR PFX "unable to alloc new ethernet\n"); + rc = -ENOMEM; + goto err_out_0; + } + + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, &pdev->dev); + + tp = netdev_priv(dev); + tp->msg_enable = netif_msg_init(debug.msg_enable, SIS190_MSG_DEFAULT); + + rc = pci_enable_device(pdev); + if (rc < 0) { + net_probe(tp, KERN_ERR "%s: enable failure\n", pci_name(pdev)); + goto err_free_dev_1; + } + + rc = -ENODEV; + + if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { + net_probe(tp, KERN_ERR "%s: region #0 is no MMIO resource.\n", + pci_name(pdev)); + goto err_pci_disable_2; + } + if (pci_resource_len(pdev, 0) < SIS190_REGS_SIZE) { + net_probe(tp, KERN_ERR "%s: invalid PCI region size(s).\n", + pci_name(pdev)); + goto err_pci_disable_2; + } + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc < 0) { + net_probe(tp, KERN_ERR PFX "%s: could not request regions.\n", + pci_name(pdev)); + goto err_pci_disable_2; + } + + rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (rc < 0) { + net_probe(tp, KERN_ERR "%s: DMA configuration failed.\n", + pci_name(pdev)); + goto err_free_res_3; + } + + pci_set_master(pdev); + + ioaddr = ioremap(pci_resource_start(pdev, 0), SIS190_REGS_SIZE); + if (!ioaddr) { + net_probe(tp, KERN_ERR "%s: cannot remap MMIO, aborting\n", + pci_name(pdev)); + rc = -EIO; + goto err_free_res_3; + } + + tp->pci_dev = pdev; + tp->mmio_addr = ioaddr; + + sis190_irq_mask_and_ack(ioaddr); + + sis190_soft_reset(ioaddr); +out: + return dev; + +err_free_res_3: + pci_release_regions(pdev); +err_pci_disable_2: + pci_disable_device(pdev); +err_free_dev_1: + free_netdev(dev); +err_out_0: + dev = ERR_PTR(rc); + goto out; +} + +static void sis190_tx_timeout(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + u8 tmp8; + + /* Disable Tx, if not already */ + tmp8 = SIS_R8(TxControl); + if (tmp8 & CmdTxEnb) + SIS_W8(TxControl, tmp8 & ~CmdTxEnb); + + + net_tx_err(tp, KERN_INFO "%s: Transmit timeout, status %08x %08x.\n", + dev->name, SIS_R32(TxControl), SIS_R32(TxSts)); + + /* Disable interrupts by clearing the interrupt mask. */ + SIS_W32(IntrMask, 0x0000); + + /* Stop a shared interrupt from scavenging while we are. */ + spin_lock_irq(&tp->lock); + sis190_tx_clear(tp); + spin_unlock_irq(&tp->lock); + + /* ...and finally, reset everything. */ + sis190_hw_start(dev); + + netif_wake_queue(dev); +} + +static int __devinit sis190_get_mac_addr_from_eeprom(struct pci_dev *pdev, + struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + u16 sig; + int i; + + net_probe(tp, KERN_INFO "%s: Read MAC address from EEPROM\n", + pci_name(pdev)); + + /* Check to see if there is a sane EEPROM */ + sig = (u16) sis190_read_eeprom(ioaddr, EEPROMSignature); + + if ((sig == 0xffff) || (sig == 0x0000)) { + net_probe(tp, KERN_INFO "%s: Error EEPROM read %x.\n", + pci_name(pdev), sig); + return -EIO; + } + + /* Get MAC address from EEPROM */ + for (i = 0; i < MAC_ADDR_LEN / 2; i++) { + __le16 w = sis190_read_eeprom(ioaddr, EEPROMMACAddr + i); + + ((u16 *)dev->dev_addr)[0] = le16_to_cpu(w); + } + + return 0; +} + +/** + * sis190_get_mac_addr_from_apc - Get MAC address for SiS965 model + * @pdev: PCI device + * @dev: network device to get address for + * + * SiS965 model, use APC CMOS RAM to store MAC address. + * APC CMOS RAM is accessed through ISA bridge. + * MAC address is read into @net_dev->dev_addr. + */ +static int __devinit sis190_get_mac_addr_from_apc(struct pci_dev *pdev, + struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + struct pci_dev *isa_bridge; + u8 reg, tmp8; + int i; + + net_probe(tp, KERN_INFO "%s: Read MAC address from APC.\n", + pci_name(pdev)); + + isa_bridge = pci_get_device(PCI_VENDOR_ID_SI, 0x0965, NULL); + if (!isa_bridge) { + net_probe(tp, KERN_INFO "%s: Can not find ISA bridge.\n", + pci_name(pdev)); + return -EIO; + } + + /* Enable port 78h & 79h to access APC Registers. */ + pci_read_config_byte(isa_bridge, 0x48, &tmp8); + reg = (tmp8 & ~0x02); + pci_write_config_byte(isa_bridge, 0x48, reg); + udelay(50); + pci_read_config_byte(isa_bridge, 0x48, ®); + + for (i = 0; i < MAC_ADDR_LEN; i++) { + outb(0x9 + i, 0x78); + dev->dev_addr[i] = inb(0x79); + } + + outb(0x12, 0x78); + reg = inb(0x79); + + /* Restore the value to ISA Bridge */ + pci_write_config_byte(isa_bridge, 0x48, tmp8); + pci_dev_put(isa_bridge); + + return 0; +} + +/** + * sis190_init_rxfilter - Initialize the Rx filter + * @dev: network device to initialize + * + * Set receive filter address to our MAC address + * and enable packet filtering. + */ +static inline void sis190_init_rxfilter(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + u16 ctl; + int i; + + ctl = SIS_R16(RxMacControl); + /* + * Disable packet filtering before setting filter. + * Note: SiS's driver writes 32 bits but RxMacControl is 16 bits + * only and followed by RxMacAddr (6 bytes). Strange. -- FR + */ + SIS_W16(RxMacControl, ctl & ~0x0f00); + + for (i = 0; i < MAC_ADDR_LEN; i++) + SIS_W8(RxMacAddr + i, dev->dev_addr[i]); + + SIS_W16(RxMacControl, ctl); + SIS_PCI_COMMIT(); +} + +static int sis190_get_mac_addr(struct pci_dev *pdev, struct net_device *dev) +{ + u8 from; + + pci_read_config_byte(pdev, 0x73, &from); + + return (from & 0x00000001) ? + sis190_get_mac_addr_from_apc(pdev, dev) : + sis190_get_mac_addr_from_eeprom(pdev, dev); +} + +static void sis190_set_speed_auto(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + int phy_id = tp->mii_if.phy_id; + int val; + + net_link(tp, KERN_INFO "%s: Enabling Auto-negotiation.\n", dev->name); + + val = mdio_read(ioaddr, phy_id, MII_ADVERTISE); + + // Enable 10/100 Full/Half Mode, leave MII_ADVERTISE bit4:0 + // unchanged. + mdio_write(ioaddr, phy_id, MII_ADVERTISE, (val & ADVERTISE_SLCT) | + ADVERTISE_100FULL | ADVERTISE_10FULL | + ADVERTISE_100HALF | ADVERTISE_10HALF); + + // Enable 1000 Full Mode. + mdio_write(ioaddr, phy_id, MII_CTRL1000, ADVERTISE_1000FULL); + + // Enable auto-negotiation and restart auto-negotiation. + mdio_write(ioaddr, phy_id, MII_BMCR, + BMCR_ANENABLE | BMCR_ANRESTART | BMCR_RESET); +} + +static int sis190_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct sis190_private *tp = netdev_priv(dev); + + return mii_ethtool_gset(&tp->mii_if, cmd); +} + +static int sis190_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct sis190_private *tp = netdev_priv(dev); + + return mii_ethtool_sset(&tp->mii_if, cmd); +} + +static void sis190_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct sis190_private *tp = netdev_priv(dev); + + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + strcpy(info->bus_info, pci_name(tp->pci_dev)); +} + +static int sis190_get_regs_len(struct net_device *dev) +{ + return SIS190_REGS_SIZE; +} + +static void sis190_get_regs(struct net_device *dev, struct ethtool_regs *regs, + void *p) +{ + struct sis190_private *tp = netdev_priv(dev); + unsigned long flags; + + if (regs->len > SIS190_REGS_SIZE) + regs->len = SIS190_REGS_SIZE; + + spin_lock_irqsave(&tp->lock, flags); + memcpy_fromio(p, tp->mmio_addr, regs->len); + spin_unlock_irqrestore(&tp->lock, flags); +} + +static int sis190_nway_reset(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + + return mii_nway_restart(&tp->mii_if); +} + +static u32 sis190_get_msglevel(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + + return tp->msg_enable; +} + +static void sis190_set_msglevel(struct net_device *dev, u32 value) +{ + struct sis190_private *tp = netdev_priv(dev); + + tp->msg_enable = value; +} + +static struct ethtool_ops sis190_ethtool_ops = { + .get_settings = sis190_get_settings, + .set_settings = sis190_set_settings, + .get_drvinfo = sis190_get_drvinfo, + .get_regs_len = sis190_get_regs_len, + .get_regs = sis190_get_regs, + .get_link = ethtool_op_get_link, + .get_msglevel = sis190_get_msglevel, + .set_msglevel = sis190_set_msglevel, + .nway_reset = sis190_nway_reset, +}; + +static int sis190_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct sis190_private *tp = netdev_priv(dev); + + return !netif_running(dev) ? -EINVAL : + generic_mii_ioctl(&tp->mii_if, if_mii(ifr), cmd, NULL); +} + +static int __devinit sis190_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + static int printed_version = 0; + struct sis190_private *tp; + struct net_device *dev; + void __iomem *ioaddr; + int rc; + + if (!printed_version) { + net_drv(&debug, KERN_INFO SIS190_DRIVER_NAME " loaded.\n"); + printed_version = 1; + } + + dev = sis190_init_board(pdev); + if (IS_ERR(dev)) { + rc = PTR_ERR(dev); + goto out; + } + + tp = netdev_priv(dev); + ioaddr = tp->mmio_addr; + + rc = sis190_get_mac_addr(pdev, dev); + if (rc < 0) + goto err_release_board; + + sis190_init_rxfilter(dev); + + INIT_WORK(&tp->phy_task, sis190_phy_task, dev); + + dev->open = sis190_open; + dev->stop = sis190_close; + dev->do_ioctl = sis190_ioctl; + dev->get_stats = sis190_get_stats; + dev->tx_timeout = sis190_tx_timeout; + dev->watchdog_timeo = SIS190_TX_TIMEOUT; + dev->hard_start_xmit = sis190_start_xmit; +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = sis190_netpoll; +#endif + dev->set_multicast_list = sis190_set_rx_mode; + SET_ETHTOOL_OPS(dev, &sis190_ethtool_ops); + dev->irq = pdev->irq; + dev->base_addr = (unsigned long) 0xdead; + + spin_lock_init(&tp->lock); + + rc = sis190_mii_probe(dev); + if (rc < 0) + goto err_release_board; + + rc = register_netdev(dev); + if (rc < 0) + goto err_remove_mii; + + pci_set_drvdata(pdev, dev); + + net_probe(tp, KERN_INFO "%s: %s at %p (IRQ: %d), " + "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n", + pci_name(pdev), sis_chip_info[ent->driver_data].name, + ioaddr, dev->irq, + dev->dev_addr[0], dev->dev_addr[1], + dev->dev_addr[2], dev->dev_addr[3], + dev->dev_addr[4], dev->dev_addr[5]); + + netif_carrier_off(dev); + + sis190_set_speed_auto(dev); +out: + return rc; + +err_remove_mii: + sis190_mii_remove(dev); +err_release_board: + sis190_release_board(pdev); + goto out; +} + +static void __devexit sis190_remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + + sis190_mii_remove(dev); + unregister_netdev(dev); + sis190_release_board(pdev); + pci_set_drvdata(pdev, NULL); +} + +static struct pci_driver sis190_pci_driver = { + .name = DRV_NAME, + .id_table = sis190_pci_tbl, + .probe = sis190_init_one, + .remove = __devexit_p(sis190_remove_one), +}; + +static int __init sis190_init_module(void) +{ + return pci_module_init(&sis190_pci_driver); +} + +static void __exit sis190_cleanup_module(void) +{ + pci_unregister_driver(&sis190_pci_driver); +} + +module_init(sis190_init_module); +module_exit(sis190_cleanup_module); diff --git a/drivers/net/tulip/Kconfig b/drivers/net/tulip/Kconfig index e2cdaf876201..8c9634a98c11 100644 --- a/drivers/net/tulip/Kconfig +++ b/drivers/net/tulip/Kconfig @@ -135,6 +135,18 @@ config DM9102 <file:Documentation/networking/net-modules.txt>. The module will be called dmfe. +config ULI526X + tristate "ULi M526x controller support" + depends on NET_TULIP && PCI + select CRC32 + ---help--- + This driver is for ULi M5261/M5263 10/100M Ethernet Controller + (<http://www.uli.com.tw/>). + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module will + be called uli526x. + config PCMCIA_XIRCOM tristate "Xircom CardBus support (new driver)" depends on NET_TULIP && CARDBUS diff --git a/drivers/net/tulip/Makefile b/drivers/net/tulip/Makefile index 8bb9b4683979..451090d6fcca 100644 --- a/drivers/net/tulip/Makefile +++ b/drivers/net/tulip/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_WINBOND_840) += winbond-840.o obj-$(CONFIG_DE2104X) += de2104x.o obj-$(CONFIG_TULIP) += tulip.o obj-$(CONFIG_DE4X5) += de4x5.o +obj-$(CONFIG_ULI526X) += uli526x.o # Declare multi-part drivers. diff --git a/drivers/net/tulip/media.c b/drivers/net/tulip/media.c index e26c31f944bf..f53396fe79c9 100644 --- a/drivers/net/tulip/media.c +++ b/drivers/net/tulip/media.c @@ -81,25 +81,6 @@ int tulip_mdio_read(struct net_device *dev, int phy_id, int location) return retval & 0xffff; } - if(tp->chip_id == ULI526X && tp->revision >= 0x40) { - int value; - int i = 1000; - - value = ioread32(ioaddr + CSR9); - iowrite32(value & 0xFFEFFFFF, ioaddr + CSR9); - - value = (phy_id << 21) | (location << 16) | 0x08000000; - iowrite32(value, ioaddr + CSR10); - - while(--i > 0) { - mdio_delay(); - if(ioread32(ioaddr + CSR10) & 0x10000000) - break; - } - retval = ioread32(ioaddr + CSR10); - spin_unlock_irqrestore(&tp->mii_lock, flags); - return retval & 0xFFFF; - } /* Establish sync by sending at least 32 logic ones. */ for (i = 32; i >= 0; i--) { iowrite32(MDIO_ENB | MDIO_DATA_WRITE1, mdio_addr); @@ -159,23 +140,6 @@ void tulip_mdio_write(struct net_device *dev, int phy_id, int location, int val) spin_unlock_irqrestore(&tp->mii_lock, flags); return; } - if (tp->chip_id == ULI526X && tp->revision >= 0x40) { - int value; - int i = 1000; - - value = ioread32(ioaddr + CSR9); - iowrite32(value & 0xFFEFFFFF, ioaddr + CSR9); - - value = (phy_id << 21) | (location << 16) | 0x04000000 | (val & 0xFFFF); - iowrite32(value, ioaddr + CSR10); - - while(--i > 0) { - if (ioread32(ioaddr + CSR10) & 0x10000000) - break; - } - spin_unlock_irqrestore(&tp->mii_lock, flags); - return; - } /* Establish sync by sending 32 logic ones. */ for (i = 32; i >= 0; i--) { diff --git a/drivers/net/tulip/timer.c b/drivers/net/tulip/timer.c index 691568283553..e058a9fbfe88 100644 --- a/drivers/net/tulip/timer.c +++ b/drivers/net/tulip/timer.c @@ -39,7 +39,6 @@ void tulip_timer(unsigned long data) case MX98713: case COMPEX9881: case DM910X: - case ULI526X: default: { struct medialeaf *mleaf; unsigned char *p; diff --git a/drivers/net/tulip/tulip.h b/drivers/net/tulip/tulip.h index 20346d847d9e..05d2d96f7be2 100644 --- a/drivers/net/tulip/tulip.h +++ b/drivers/net/tulip/tulip.h @@ -88,7 +88,6 @@ enum chips { I21145, DM910X, CONEXANT, - ULI526X }; @@ -482,11 +481,8 @@ static inline void tulip_stop_rxtx(struct tulip_private *tp) static inline void tulip_restart_rxtx(struct tulip_private *tp) { - if(!(tp->chip_id == ULI526X && - (tp->revision == 0x40 || tp->revision == 0x50))) { - tulip_stop_rxtx(tp); - udelay(5); - } + tulip_stop_rxtx(tp); + udelay(5); tulip_start_rxtx(tp); } diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c index d45d8f56e5b4..05da5bea564c 100644 --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -199,9 +199,6 @@ struct tulip_chip_table tulip_tbl[] = { { "Conexant LANfinity", 256, 0x0001ebef, HAS_MII | HAS_ACPI, tulip_timer }, - /* ULi526X */ - { "ULi M5261/M5263", 128, 0x0001ebef, - HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | HAS_ACPI, tulip_timer }, }; @@ -239,8 +236,6 @@ static struct pci_device_id tulip_pci_tbl[] = { { 0x1737, 0xAB09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, { 0x1737, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, { 0x17B3, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, - { 0x10b9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ULI526X }, /* ALi 1563 integrated ethernet */ - { 0x10b9, 0x5263, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ULI526X }, /* ALi 1563 integrated ethernet */ { 0x10b7, 0x9300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* 3Com 3CSOHO100B-TX */ { 0x14ea, 0xab08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* Planex FNW-3602-TX */ { } /* terminate list */ @@ -522,7 +517,7 @@ static void tulip_tx_timeout(struct net_device *dev) dev->name); } else if (tp->chip_id == DC21140 || tp->chip_id == DC21142 || tp->chip_id == MX98713 || tp->chip_id == COMPEX9881 - || tp->chip_id == DM910X || tp->chip_id == ULI526X) { + || tp->chip_id == DM910X) { printk(KERN_WARNING "%s: 21140 transmit timed out, status %8.8x, " "SIA %8.8x %8.8x %8.8x %8.8x, resetting...\n", dev->name, ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12), @@ -1103,18 +1098,16 @@ static void set_rx_mode(struct net_device *dev) entry = tp->cur_tx++ % TX_RING_SIZE; if (entry != 0) { - /* Avoid a chip errata by prefixing a dummy entry. Don't do - this on the ULI526X as it triggers a different problem */ - if (!(tp->chip_id == ULI526X && (tp->revision == 0x40 || tp->revision == 0x50))) { - tp->tx_buffers[entry].skb = NULL; - tp->tx_buffers[entry].mapping = 0; - tp->tx_ring[entry].length = - (entry == TX_RING_SIZE-1) ? cpu_to_le32(DESC_RING_WRAP) : 0; - tp->tx_ring[entry].buffer1 = 0; - /* Must set DescOwned later to avoid race with chip */ - dummy = entry; - entry = tp->cur_tx++ % TX_RING_SIZE; - } + /* Avoid a chip errata by prefixing a dummy entry. */ + tp->tx_buffers[entry].skb = NULL; + tp->tx_buffers[entry].mapping = 0; + tp->tx_ring[entry].length = + (entry == TX_RING_SIZE-1) ? cpu_to_le32(DESC_RING_WRAP) : 0; + tp->tx_ring[entry].buffer1 = 0; + /* Must set DescOwned later to avoid race with chip */ + dummy = entry; + entry = tp->cur_tx++ % TX_RING_SIZE; + } tp->tx_buffers[entry].skb = NULL; @@ -1235,10 +1228,6 @@ static int tulip_uli_dm_quirk(struct pci_dev *pdev) { if (pdev->vendor == 0x1282 && pdev->device == 0x9102) return 1; - if (pdev->vendor == 0x10b9 && pdev->device == 0x5261) - return 1; - if (pdev->vendor == 0x10b9 && pdev->device == 0x5263) - return 1; return 0; } @@ -1680,7 +1669,6 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, switch (chip_idx) { case DC21140: case DM910X: - case ULI526X: default: if (tp->mtable) iowrite32(tp->mtable->csr12dir | 0x100, ioaddr + CSR12); diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c new file mode 100644 index 000000000000..5ae22b7bc5ca --- /dev/null +++ b/drivers/net/tulip/uli526x.c @@ -0,0 +1,1749 @@ +/* + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + +*/ + +#define DRV_NAME "uli526x" +#define DRV_VERSION "0.9.3" +#define DRV_RELDATE "2005-7-29" + +#include <linux/module.h> + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/ptrace.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/skbuff.h> +#include <linux/delay.h> +#include <linux/spinlock.h> + +#include <asm/processor.h> +#include <asm/bitops.h> +#include <asm/io.h> +#include <asm/dma.h> +#include <asm/uaccess.h> + + +/* Board/System/Debug information/definition ---------------- */ +#define PCI_ULI5261_ID 0x526110B9 /* ULi M5261 ID*/ +#define PCI_ULI5263_ID 0x526310B9 /* ULi M5263 ID*/ + +#define ULI526X_IO_SIZE 0x100 +#define TX_DESC_CNT 0x20 /* Allocated Tx descriptors */ +#define RX_DESC_CNT 0x30 /* Allocated Rx descriptors */ +#define TX_FREE_DESC_CNT (TX_DESC_CNT - 2) /* Max TX packet count */ +#define TX_WAKE_DESC_CNT (TX_DESC_CNT - 3) /* TX wakeup count */ +#define DESC_ALL_CNT (TX_DESC_CNT + RX_DESC_CNT) +#define TX_BUF_ALLOC 0x600 +#define RX_ALLOC_SIZE 0x620 +#define ULI526X_RESET 1 +#define CR0_DEFAULT 0 +#define CR6_DEFAULT 0x22200000 +#define CR7_DEFAULT 0x180c1 +#define CR15_DEFAULT 0x06 /* TxJabber RxWatchdog */ +#define TDES0_ERR_MASK 0x4302 /* TXJT, LC, EC, FUE */ +#define MAX_PACKET_SIZE 1514 +#define ULI5261_MAX_MULTICAST 14 +#define RX_COPY_SIZE 100 +#define MAX_CHECK_PACKET 0x8000 + +#define ULI526X_10MHF 0 +#define ULI526X_100MHF 1 +#define ULI526X_10MFD 4 +#define ULI526X_100MFD 5 +#define ULI526X_AUTO 8 + +#define ULI526X_TXTH_72 0x400000 /* TX TH 72 byte */ +#define ULI526X_TXTH_96 0x404000 /* TX TH 96 byte */ +#define ULI526X_TXTH_128 0x0000 /* TX TH 128 byte */ +#define ULI526X_TXTH_256 0x4000 /* TX TH 256 byte */ +#define ULI526X_TXTH_512 0x8000 /* TX TH 512 byte */ +#define ULI526X_TXTH_1K 0xC000 /* TX TH 1K byte */ + +#define ULI526X_TIMER_WUT (jiffies + HZ * 1)/* timer wakeup time : 1 second */ +#define ULI526X_TX_TIMEOUT ((16*HZ)/2) /* tx packet time-out time 8 s" */ +#define ULI526X_TX_KICK (4*HZ/2) /* tx packet Kick-out time 2 s" */ + +#define ULI526X_DBUG(dbug_now, msg, value) if (uli526x_debug || (dbug_now)) printk(KERN_ERR DRV_NAME ": %s %lx\n", (msg), (long) (value)) + +#define SHOW_MEDIA_TYPE(mode) printk(KERN_ERR DRV_NAME ": Change Speed to %sMhz %s duplex\n",mode & 1 ?"100":"10", mode & 4 ? "full":"half"); + + +/* CR9 definition: SROM/MII */ +#define CR9_SROM_READ 0x4800 +#define CR9_SRCS 0x1 +#define CR9_SRCLK 0x2 +#define CR9_CRDOUT 0x8 +#define SROM_DATA_0 0x0 +#define SROM_DATA_1 0x4 +#define PHY_DATA_1 0x20000 +#define PHY_DATA_0 0x00000 +#define MDCLKH 0x10000 + +#define PHY_POWER_DOWN 0x800 + +#define SROM_V41_CODE 0x14 + +#define SROM_CLK_WRITE(data, ioaddr) \ + outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \ + udelay(5); \ + outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK,ioaddr); \ + udelay(5); \ + outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \ + udelay(5); + +/* Structure/enum declaration ------------------------------- */ +struct tx_desc { + u32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */ + char *tx_buf_ptr; /* Data for us */ + struct tx_desc *next_tx_desc; +} __attribute__(( aligned(32) )); + +struct rx_desc { + u32 rdes0, rdes1, rdes2, rdes3; /* Data for the card */ + struct sk_buff *rx_skb_ptr; /* Data for us */ + struct rx_desc *next_rx_desc; +} __attribute__(( aligned(32) )); + +struct uli526x_board_info { + u32 chip_id; /* Chip vendor/Device ID */ + struct net_device *next_dev; /* next device */ + struct pci_dev *pdev; /* PCI device */ + spinlock_t lock; + + long ioaddr; /* I/O base address */ + u32 cr0_data; + u32 cr5_data; + u32 cr6_data; + u32 cr7_data; + u32 cr15_data; + + /* pointer for memory physical address */ + dma_addr_t buf_pool_dma_ptr; /* Tx buffer pool memory */ + dma_addr_t buf_pool_dma_start; /* Tx buffer pool align dword */ + dma_addr_t desc_pool_dma_ptr; /* descriptor pool memory */ + dma_addr_t first_tx_desc_dma; + dma_addr_t first_rx_desc_dma; + + /* descriptor pointer */ + unsigned char *buf_pool_ptr; /* Tx buffer pool memory */ + unsigned char *buf_pool_start; /* Tx buffer pool align dword */ + unsigned char *desc_pool_ptr; /* descriptor pool memory */ + struct tx_desc *first_tx_desc; + struct tx_desc *tx_insert_ptr; + struct tx_desc *tx_remove_ptr; + struct rx_desc *first_rx_desc; + struct rx_desc *rx_insert_ptr; + struct rx_desc *rx_ready_ptr; /* packet come pointer */ + unsigned long tx_packet_cnt; /* transmitted packet count */ + unsigned long rx_avail_cnt; /* available rx descriptor count */ + unsigned long interval_rx_cnt; /* rx packet count a callback time */ + + u16 dbug_cnt; + u16 NIC_capability; /* NIC media capability */ + u16 PHY_reg4; /* Saved Phyxcer register 4 value */ + + u8 media_mode; /* user specify media mode */ + u8 op_mode; /* real work media mode */ + u8 phy_addr; + u8 link_failed; /* Ever link failed */ + u8 wait_reset; /* Hardware failed, need to reset */ + struct timer_list timer; + + /* System defined statistic counter */ + struct net_device_stats stats; + + /* Driver defined statistic counter */ + unsigned long tx_fifo_underrun; + unsigned long tx_loss_carrier; + unsigned long tx_no_carrier; + unsigned long tx_late_collision; + unsigned long tx_excessive_collision; + unsigned long tx_jabber_timeout; + unsigned long reset_count; + unsigned long reset_cr8; + unsigned long reset_fatal; + unsigned long reset_TXtimeout; + + /* NIC SROM data */ + unsigned char srom[128]; + u8 init; +}; + +enum uli526x_offsets { + DCR0 = 0x00, DCR1 = 0x08, DCR2 = 0x10, DCR3 = 0x18, DCR4 = 0x20, + DCR5 = 0x28, DCR6 = 0x30, DCR7 = 0x38, DCR8 = 0x40, DCR9 = 0x48, + DCR10 = 0x50, DCR11 = 0x58, DCR12 = 0x60, DCR13 = 0x68, DCR14 = 0x70, + DCR15 = 0x78 +}; + +enum uli526x_CR6_bits { + CR6_RXSC = 0x2, CR6_PBF = 0x8, CR6_PM = 0x40, CR6_PAM = 0x80, + CR6_FDM = 0x200, CR6_TXSC = 0x2000, CR6_STI = 0x100000, + CR6_SFT = 0x200000, CR6_RXA = 0x40000000, CR6_NO_PURGE = 0x20000000 +}; + +/* Global variable declaration ----------------------------- */ +static int __devinitdata printed_version; +static char version[] __devinitdata = + KERN_INFO DRV_NAME ": ULi M5261/M5263 net driver, version " + DRV_VERSION " (" DRV_RELDATE ")\n"; + +static int uli526x_debug; +static unsigned char uli526x_media_mode = ULI526X_AUTO; +static u32 uli526x_cr6_user_set; + +/* For module input parameter */ +static int debug; +static u32 cr6set; +static unsigned char mode = 8; + +/* function declaration ------------------------------------- */ +static int uli526x_open(struct net_device *); +static int uli526x_start_xmit(struct sk_buff *, struct net_device *); +static int uli526x_stop(struct net_device *); +static struct net_device_stats * uli526x_get_stats(struct net_device *); +static void uli526x_set_filter_mode(struct net_device *); +static struct ethtool_ops netdev_ethtool_ops; +static u16 read_srom_word(long, int); +static irqreturn_t uli526x_interrupt(int, void *, struct pt_regs *); +static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long); +static void allocate_rx_buffer(struct uli526x_board_info *); +static void update_cr6(u32, unsigned long); +static void send_filter_frame(struct net_device *, int); +static u16 phy_read(unsigned long, u8, u8, u32); +static u16 phy_readby_cr10(unsigned long, u8, u8); +static void phy_write(unsigned long, u8, u8, u16, u32); +static void phy_writeby_cr10(unsigned long, u8, u8, u16); +static void phy_write_1bit(unsigned long, u32, u32); +static u16 phy_read_1bit(unsigned long, u32); +static u8 uli526x_sense_speed(struct uli526x_board_info *); +static void uli526x_process_mode(struct uli526x_board_info *); +static void uli526x_timer(unsigned long); +static void uli526x_rx_packet(struct net_device *, struct uli526x_board_info *); +static void uli526x_free_tx_pkt(struct net_device *, struct uli526x_board_info *); +static void uli526x_reuse_skb(struct uli526x_board_info *, struct sk_buff *); +static void uli526x_dynamic_reset(struct net_device *); +static void uli526x_free_rxbuffer(struct uli526x_board_info *); +static void uli526x_init(struct net_device *); +static void uli526x_set_phyxcer(struct uli526x_board_info *); + +/* ULI526X network board routine ---------------------------- */ + +/* + * Search ULI526X board, allocate space and register it + */ + +static int __devinit uli526x_init_one (struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct uli526x_board_info *db; /* board information structure */ + struct net_device *dev; + int i, err; + + ULI526X_DBUG(0, "uli526x_init_one()", 0); + + if (!printed_version++) + printk(version); + + /* Init network device */ + dev = alloc_etherdev(sizeof(*db)); + if (dev == NULL) + return -ENOMEM; + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, &pdev->dev); + + if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) { + printk(KERN_WARNING DRV_NAME ": 32-bit PCI DMA not available.\n"); + err = -ENODEV; + goto err_out_free; + } + + /* Enable Master/IO access, Disable memory access */ + err = pci_enable_device(pdev); + if (err) + goto err_out_free; + + if (!pci_resource_start(pdev, 0)) { + printk(KERN_ERR DRV_NAME ": I/O base is zero\n"); + err = -ENODEV; + goto err_out_disable; + } + + if (pci_resource_len(pdev, 0) < (ULI526X_IO_SIZE) ) { + printk(KERN_ERR DRV_NAME ": Allocated I/O size too small\n"); + err = -ENODEV; + goto err_out_disable; + } + + if (pci_request_regions(pdev, DRV_NAME)) { + printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n"); + err = -ENODEV; + goto err_out_disable; + } + + /* Init system & device */ + db = netdev_priv(dev); + + /* Allocate Tx/Rx descriptor memory */ + db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr); + if(db->desc_pool_ptr == NULL) + { + err = -ENOMEM; + goto err_out_nomem; + } + db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, &db->buf_pool_dma_ptr); + if(db->buf_pool_ptr == NULL) + { + err = -ENOMEM; + goto err_out_nomem; + } + + db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr; + db->first_tx_desc_dma = db->desc_pool_dma_ptr; + db->buf_pool_start = db->buf_pool_ptr; + db->buf_pool_dma_start = db->buf_pool_dma_ptr; + + db->chip_id = ent->driver_data; + db->ioaddr = pci_resource_start(pdev, 0); + + db->pdev = pdev; + db->init = 1; + + dev->base_addr = db->ioaddr; + dev->irq = pdev->irq; + pci_set_drvdata(pdev, dev); + + /* Register some necessary functions */ + dev->open = &uli526x_open; + dev->hard_start_xmit = &uli526x_start_xmit; + dev->stop = &uli526x_stop; + dev->get_stats = &uli526x_get_stats; + dev->set_multicast_list = &uli526x_set_filter_mode; + dev->ethtool_ops = &netdev_ethtool_ops; + spin_lock_init(&db->lock); + + + /* read 64 word srom data */ + for (i = 0; i < 64; i++) + ((u16 *) db->srom)[i] = cpu_to_le16(read_srom_word(db->ioaddr, i)); + + /* Set Node address */ + if(((u16 *) db->srom)[0] == 0xffff || ((u16 *) db->srom)[0] == 0) /* SROM absent, so read MAC address from ID Table */ + { + outl(0x10000, db->ioaddr + DCR0); //Diagnosis mode + outl(0x1c0, db->ioaddr + DCR13); //Reset dianostic pointer port + outl(0, db->ioaddr + DCR14); //Clear reset port + outl(0x10, db->ioaddr + DCR14); //Reset ID Table pointer + outl(0, db->ioaddr + DCR14); //Clear reset port + outl(0, db->ioaddr + DCR13); //Clear CR13 + outl(0x1b0, db->ioaddr + DCR13); //Select ID Table access port + //Read MAC address from CR14 + for (i = 0; i < 6; i++) + dev->dev_addr[i] = inl(db->ioaddr + DCR14); + //Read end + outl(0, db->ioaddr + DCR13); //Clear CR13 + outl(0, db->ioaddr + DCR0); //Clear CR0 + udelay(10); + } + else /*Exist SROM*/ + { + for (i = 0; i < 6; i++) + dev->dev_addr[i] = db->srom[20 + i]; + } + err = register_netdev (dev); + if (err) + goto err_out_res; + + printk(KERN_INFO "%s: ULi M%04lx at pci%s,",dev->name,ent->driver_data >> 16,pci_name(pdev)); + + for (i = 0; i < 6; i++) + printk("%c%02x", i ? ':' : ' ', dev->dev_addr[i]); + printk(", irq %d.\n", dev->irq); + + pci_set_master(pdev); + + return 0; + +err_out_res: + pci_release_regions(pdev); +err_out_nomem: + if(db->desc_pool_ptr) + pci_free_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, + db->desc_pool_ptr, db->desc_pool_dma_ptr); + + if(db->buf_pool_ptr != NULL) + pci_free_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, + db->buf_pool_ptr, db->buf_pool_dma_ptr); +err_out_disable: + pci_disable_device(pdev); +err_out_free: + pci_set_drvdata(pdev, NULL); + free_netdev(dev); + + return err; +} + + +static void __devexit uli526x_remove_one (struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct uli526x_board_info *db = netdev_priv(dev); + + ULI526X_DBUG(0, "uli526x_remove_one()", 0); + + pci_free_consistent(db->pdev, sizeof(struct tx_desc) * + DESC_ALL_CNT + 0x20, db->desc_pool_ptr, + db->desc_pool_dma_ptr); + pci_free_consistent(db->pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, + db->buf_pool_ptr, db->buf_pool_dma_ptr); + unregister_netdev(dev); + pci_release_regions(pdev); + free_netdev(dev); /* free board information */ + pci_set_drvdata(pdev, NULL); + pci_disable_device(pdev); + ULI526X_DBUG(0, "uli526x_remove_one() exit", 0); +} + + +/* + * Open the interface. + * The interface is opened whenever "ifconfig" activates it. + */ + +static int uli526x_open(struct net_device *dev) +{ + int ret; + struct uli526x_board_info *db = netdev_priv(dev); + + ULI526X_DBUG(0, "uli526x_open", 0); + + ret = request_irq(dev->irq, &uli526x_interrupt, SA_SHIRQ, dev->name, dev); + if (ret) + return ret; + + /* system variable init */ + db->cr6_data = CR6_DEFAULT | uli526x_cr6_user_set; + db->tx_packet_cnt = 0; + db->rx_avail_cnt = 0; + db->link_failed = 1; + netif_carrier_off(dev); + db->wait_reset = 0; + + db->NIC_capability = 0xf; /* All capability*/ + db->PHY_reg4 = 0x1e0; + + /* CR6 operation mode decision */ + db->cr6_data |= ULI526X_TXTH_256; + db->cr0_data = CR0_DEFAULT; + + /* Initialize ULI526X board */ + uli526x_init(dev); + + /* Active System Interface */ + netif_wake_queue(dev); + + /* set and active a timer process */ + init_timer(&db->timer); + db->timer.expires = ULI526X_TIMER_WUT + HZ * 2; + db->timer.data = (unsigned long)dev; + db->timer.function = &uli526x_timer; + add_timer(&db->timer); + + return 0; +} + + +/* Initialize ULI526X board + * Reset ULI526X board + * Initialize TX/Rx descriptor chain structure + * Send the set-up frame + * Enable Tx/Rx machine + */ + +static void uli526x_init(struct net_device *dev) +{ + struct uli526x_board_info *db = netdev_priv(dev); + unsigned long ioaddr = db->ioaddr; + u8 phy_tmp; + u16 phy_value; + u16 phy_reg_reset; + + ULI526X_DBUG(0, "uli526x_init()", 0); + + /* Reset M526x MAC controller */ + outl(ULI526X_RESET, ioaddr + DCR0); /* RESET MAC */ + udelay(100); + outl(db->cr0_data, ioaddr + DCR0); + udelay(5); + + /* Phy addr : In some boards,M5261/M5263 phy address != 1 */ + db->phy_addr = 1; + for(phy_tmp=0;phy_tmp<32;phy_tmp++) + { + phy_value=phy_read(db->ioaddr,phy_tmp,3,db->chip_id);//peer add + if(phy_value != 0xffff&&phy_value!=0) + { + db->phy_addr = phy_tmp; + break; + } + } + if(phy_tmp == 32) + printk(KERN_WARNING "Can not find the phy address!!!"); + /* Parser SROM and media mode */ + db->media_mode = uli526x_media_mode; + + /* Phyxcer capability setting */ + phy_reg_reset = phy_read(db->ioaddr, db->phy_addr, 0, db->chip_id); + phy_reg_reset = (phy_reg_reset | 0x8000); + phy_write(db->ioaddr, db->phy_addr, 0, phy_reg_reset, db->chip_id); + udelay(500); + + /* Process Phyxcer Media Mode */ + uli526x_set_phyxcer(db); + + /* Media Mode Process */ + if ( !(db->media_mode & ULI526X_AUTO) ) + db->op_mode = db->media_mode; /* Force Mode */ + + /* Initialize Transmit/Receive decriptor and CR3/4 */ + uli526x_descriptor_init(db, ioaddr); + + /* Init CR6 to program M526X operation */ + update_cr6(db->cr6_data, ioaddr); + + /* Send setup frame */ + send_filter_frame(dev, dev->mc_count); /* M5261/M5263 */ + + /* Init CR7, interrupt active bit */ + db->cr7_data = CR7_DEFAULT; + outl(db->cr7_data, ioaddr + DCR7); + + /* Init CR15, Tx jabber and Rx watchdog timer */ + outl(db->cr15_data, ioaddr + DCR15); + + /* Enable ULI526X Tx/Rx function */ + db->cr6_data |= CR6_RXSC | CR6_TXSC; + update_cr6(db->cr6_data, ioaddr); +} + + +/* + * Hardware start transmission. + * Send a packet to media from the upper layer. + */ + +static int uli526x_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct uli526x_board_info *db = netdev_priv(dev); + struct tx_desc *txptr; + unsigned long flags; + + ULI526X_DBUG(0, "uli526x_start_xmit", 0); + + /* Resource flag check */ + netif_stop_queue(dev); + + /* Too large packet check */ + if (skb->len > MAX_PACKET_SIZE) { + printk(KERN_ERR DRV_NAME ": big packet = %d\n", (u16)skb->len); + dev_kfree_skb(skb); + return 0; + } + + spin_lock_irqsave(&db->lock, flags); + + /* No Tx resource check, it never happen nromally */ + if (db->tx_packet_cnt >= TX_FREE_DESC_CNT) { + spin_unlock_irqrestore(&db->lock, flags); + printk(KERN_ERR DRV_NAME ": No Tx resource %ld\n", db->tx_packet_cnt); + return 1; + } + + /* Disable NIC interrupt */ + outl(0, dev->base_addr + DCR7); + + /* transmit this packet */ + txptr = db->tx_insert_ptr; + memcpy(txptr->tx_buf_ptr, skb->data, skb->len); + txptr->tdes1 = cpu_to_le32(0xe1000000 | skb->len); + + /* Point to next transmit free descriptor */ + db->tx_insert_ptr = txptr->next_tx_desc; + + /* Transmit Packet Process */ + if ( (db->tx_packet_cnt < TX_DESC_CNT) ) { + txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */ + db->tx_packet_cnt++; /* Ready to send */ + outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */ + dev->trans_start = jiffies; /* saved time stamp */ + } + + /* Tx resource check */ + if ( db->tx_packet_cnt < TX_FREE_DESC_CNT ) + netif_wake_queue(dev); + + /* Restore CR7 to enable interrupt */ + spin_unlock_irqrestore(&db->lock, flags); + outl(db->cr7_data, dev->base_addr + DCR7); + + /* free this SKB */ + dev_kfree_skb(skb); + + return 0; +} + + +/* + * Stop the interface. + * The interface is stopped when it is brought. + */ + +static int uli526x_stop(struct net_device *dev) +{ + struct uli526x_board_info *db = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + + ULI526X_DBUG(0, "uli526x_stop", 0); + + /* disable system */ + netif_stop_queue(dev); + + /* deleted timer */ + del_timer_sync(&db->timer); + + /* Reset & stop ULI526X board */ + outl(ULI526X_RESET, ioaddr + DCR0); + udelay(5); + phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id); + + /* free interrupt */ + free_irq(dev->irq, dev); + + /* free allocated rx buffer */ + uli526x_free_rxbuffer(db); + +#if 0 + /* show statistic counter */ + printk(DRV_NAME ": FU:%lx EC:%lx LC:%lx NC:%lx LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n", + db->tx_fifo_underrun, db->tx_excessive_collision, + db->tx_late_collision, db->tx_no_carrier, db->tx_loss_carrier, + db->tx_jabber_timeout, db->reset_count, db->reset_cr8, + db->reset_fatal, db->reset_TXtimeout); +#endif + + return 0; +} + + +/* + * M5261/M5263 insterrupt handler + * receive the packet to upper layer, free the transmitted packet + */ + +static irqreturn_t uli526x_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = dev_id; + struct uli526x_board_info *db = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + unsigned long flags; + + if (!dev) { + ULI526X_DBUG(1, "uli526x_interrupt() without DEVICE arg", 0); + return IRQ_NONE; + } + + spin_lock_irqsave(&db->lock, flags); + outl(0, ioaddr + DCR7); + + /* Got ULI526X status */ + db->cr5_data = inl(ioaddr + DCR5); + outl(db->cr5_data, ioaddr + DCR5); + if ( !(db->cr5_data & 0x180c1) ) { + spin_unlock_irqrestore(&db->lock, flags); + outl(db->cr7_data, ioaddr + DCR7); + return IRQ_HANDLED; + } + + /* Check system status */ + if (db->cr5_data & 0x2000) { + /* system bus error happen */ + ULI526X_DBUG(1, "System bus error happen. CR5=", db->cr5_data); + db->reset_fatal++; + db->wait_reset = 1; /* Need to RESET */ + spin_unlock_irqrestore(&db->lock, flags); + return IRQ_HANDLED; + } + + /* Received the coming packet */ + if ( (db->cr5_data & 0x40) && db->rx_avail_cnt ) + uli526x_rx_packet(dev, db); + + /* reallocate rx descriptor buffer */ + if (db->rx_avail_cnt<RX_DESC_CNT) + allocate_rx_buffer(db); + + /* Free the transmitted descriptor */ + if ( db->cr5_data & 0x01) + uli526x_free_tx_pkt(dev, db); + + /* Restore CR7 to enable interrupt mask */ + outl(db->cr7_data, ioaddr + DCR7); + + spin_unlock_irqrestore(&db->lock, flags); + return IRQ_HANDLED; +} + + +/* + * Free TX resource after TX complete + */ + +static void uli526x_free_tx_pkt(struct net_device *dev, struct uli526x_board_info * db) +{ + struct tx_desc *txptr; + u32 tdes0; + + txptr = db->tx_remove_ptr; + while(db->tx_packet_cnt) { + tdes0 = le32_to_cpu(txptr->tdes0); + /* printk(DRV_NAME ": tdes0=%x\n", tdes0); */ + if (tdes0 & 0x80000000) + break; + + /* A packet sent completed */ + db->tx_packet_cnt--; + db->stats.tx_packets++; + + /* Transmit statistic counter */ + if ( tdes0 != 0x7fffffff ) { + /* printk(DRV_NAME ": tdes0=%x\n", tdes0); */ + db->stats.collisions += (tdes0 >> 3) & 0xf; + db->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff; + if (tdes0 & TDES0_ERR_MASK) { + db->stats.tx_errors++; + if (tdes0 & 0x0002) { /* UnderRun */ + db->tx_fifo_underrun++; + if ( !(db->cr6_data & CR6_SFT) ) { + db->cr6_data = db->cr6_data | CR6_SFT; + update_cr6(db->cr6_data, db->ioaddr); + } + } + if (tdes0 & 0x0100) + db->tx_excessive_collision++; + if (tdes0 & 0x0200) + db->tx_late_collision++; + if (tdes0 & 0x0400) + db->tx_no_carrier++; + if (tdes0 & 0x0800) + db->tx_loss_carrier++; + if (tdes0 & 0x4000) + db->tx_jabber_timeout++; + } + } + + txptr = txptr->next_tx_desc; + }/* End of while */ + + /* Update TX remove pointer to next */ + db->tx_remove_ptr = txptr; + + /* Resource available check */ + if ( db->tx_packet_cnt < TX_WAKE_DESC_CNT ) + netif_wake_queue(dev); /* Active upper layer, send again */ +} + + +/* + * Receive the come packet and pass to upper layer + */ + +static void uli526x_rx_packet(struct net_device *dev, struct uli526x_board_info * db) +{ + struct rx_desc *rxptr; + struct sk_buff *skb; + int rxlen; + u32 rdes0; + + rxptr = db->rx_ready_ptr; + + while(db->rx_avail_cnt) { + rdes0 = le32_to_cpu(rxptr->rdes0); + if (rdes0 & 0x80000000) /* packet owner check */ + { + break; + } + + db->rx_avail_cnt--; + db->interval_rx_cnt++; + + pci_unmap_single(db->pdev, le32_to_cpu(rxptr->rdes2), RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE); + if ( (rdes0 & 0x300) != 0x300) { + /* A packet without First/Last flag */ + /* reuse this SKB */ + ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0); + uli526x_reuse_skb(db, rxptr->rx_skb_ptr); + } else { + /* A packet with First/Last flag */ + rxlen = ( (rdes0 >> 16) & 0x3fff) - 4; + + /* error summary bit check */ + if (rdes0 & 0x8000) { + /* This is a error packet */ + //printk(DRV_NAME ": rdes0: %lx\n", rdes0); + db->stats.rx_errors++; + if (rdes0 & 1) + db->stats.rx_fifo_errors++; + if (rdes0 & 2) + db->stats.rx_crc_errors++; + if (rdes0 & 0x80) + db->stats.rx_length_errors++; + } + + if ( !(rdes0 & 0x8000) || + ((db->cr6_data & CR6_PM) && (rxlen>6)) ) { + skb = rxptr->rx_skb_ptr; + + /* Good packet, send to upper layer */ + /* Shorst packet used new SKB */ + if ( (rxlen < RX_COPY_SIZE) && + ( (skb = dev_alloc_skb(rxlen + 2) ) + != NULL) ) { + /* size less than COPY_SIZE, allocate a rxlen SKB */ + skb->dev = dev; + skb_reserve(skb, 2); /* 16byte align */ + memcpy(skb_put(skb, rxlen), rxptr->rx_skb_ptr->tail, rxlen); + uli526x_reuse_skb(db, rxptr->rx_skb_ptr); + } else { + skb->dev = dev; + skb_put(skb, rxlen); + } + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + dev->last_rx = jiffies; + db->stats.rx_packets++; + db->stats.rx_bytes += rxlen; + + } else { + /* Reuse SKB buffer when the packet is error */ + ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0); + uli526x_reuse_skb(db, rxptr->rx_skb_ptr); + } + } + + rxptr = rxptr->next_rx_desc; + } + + db->rx_ready_ptr = rxptr; +} + + +/* + * Get statistics from driver. + */ + +static struct net_device_stats * uli526x_get_stats(struct net_device *dev) +{ + struct uli526x_board_info *db = netdev_priv(dev); + + ULI526X_DBUG(0, "uli526x_get_stats", 0); + return &db->stats; +} + + +/* + * Set ULI526X multicast address + */ + +static void uli526x_set_filter_mode(struct net_device * dev) +{ + struct uli526x_board_info *db = dev->priv; + unsigned long flags; + + ULI526X_DBUG(0, "uli526x_set_filter_mode()", 0); + spin_lock_irqsave(&db->lock, flags); + + if (dev->flags & IFF_PROMISC) { + ULI526X_DBUG(0, "Enable PROM Mode", 0); + db->cr6_data |= CR6_PM | CR6_PBF; + update_cr6(db->cr6_data, db->ioaddr); + spin_unlock_irqrestore(&db->lock, flags); + return; + } + + if (dev->flags & IFF_ALLMULTI || dev->mc_count > ULI5261_MAX_MULTICAST) { + ULI526X_DBUG(0, "Pass all multicast address", dev->mc_count); + db->cr6_data &= ~(CR6_PM | CR6_PBF); + db->cr6_data |= CR6_PAM; + spin_unlock_irqrestore(&db->lock, flags); + return; + } + + ULI526X_DBUG(0, "Set multicast address", dev->mc_count); + send_filter_frame(dev, dev->mc_count); /* M5261/M5263 */ + spin_unlock_irqrestore(&db->lock, flags); +} + +static void +ULi_ethtool_gset(struct uli526x_board_info *db, struct ethtool_cmd *ecmd) +{ + ecmd->supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_Autoneg | + SUPPORTED_MII); + + ecmd->advertising = (ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full | + ADVERTISED_Autoneg | + ADVERTISED_MII); + + + ecmd->port = PORT_MII; + ecmd->phy_address = db->phy_addr; + + ecmd->transceiver = XCVR_EXTERNAL; + + ecmd->speed = 10; + ecmd->duplex = DUPLEX_HALF; + + if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD) + { + ecmd->speed = 100; + } + if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD) + { + ecmd->duplex = DUPLEX_FULL; + } + if(db->link_failed) + { + ecmd->speed = -1; + ecmd->duplex = -1; + } + + if (db->media_mode & ULI526X_AUTO) + { + ecmd->autoneg = AUTONEG_ENABLE; + } +} + +static void netdev_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct uli526x_board_info *np = netdev_priv(dev); + + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + if (np->pdev) + strcpy(info->bus_info, pci_name(np->pdev)); + else + sprintf(info->bus_info, "EISA 0x%lx %d", + dev->base_addr, dev->irq); +} + +static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) { + struct uli526x_board_info *np = netdev_priv(dev); + + ULi_ethtool_gset(np, cmd); + + return 0; +} + +static u32 netdev_get_link(struct net_device *dev) { + struct uli526x_board_info *np = netdev_priv(dev); + + if(np->link_failed) + return 0; + else + return 1; +} + +static void uli526x_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + wol->supported = WAKE_PHY | WAKE_MAGIC; + wol->wolopts = 0; +} + +static struct ethtool_ops netdev_ethtool_ops = { + .get_drvinfo = netdev_get_drvinfo, + .get_settings = netdev_get_settings, + .get_link = netdev_get_link, + .get_wol = uli526x_get_wol, +}; + +/* + * A periodic timer routine + * Dynamic media sense, allocate Rx buffer... + */ + +static void uli526x_timer(unsigned long data) +{ + u32 tmp_cr8; + unsigned char tmp_cr12=0; + struct net_device *dev = (struct net_device *) data; + struct uli526x_board_info *db = netdev_priv(dev); + unsigned long flags; + u8 TmpSpeed=10; + + //ULI526X_DBUG(0, "uli526x_timer()", 0); + spin_lock_irqsave(&db->lock, flags); + + + /* Dynamic reset ULI526X : system error or transmit time-out */ + tmp_cr8 = inl(db->ioaddr + DCR8); + if ( (db->interval_rx_cnt==0) && (tmp_cr8) ) { + db->reset_cr8++; + db->wait_reset = 1; + } + db->interval_rx_cnt = 0; + + /* TX polling kick monitor */ + if ( db->tx_packet_cnt && + time_after(jiffies, dev->trans_start + ULI526X_TX_KICK) ) { + outl(0x1, dev->base_addr + DCR1); // Tx polling again + + // TX Timeout + if ( time_after(jiffies, dev->trans_start + ULI526X_TX_TIMEOUT) ) { + db->reset_TXtimeout++; + db->wait_reset = 1; + printk( "%s: Tx timeout - resetting\n", + dev->name); + } + } + + if (db->wait_reset) { + ULI526X_DBUG(0, "Dynamic Reset device", db->tx_packet_cnt); + db->reset_count++; + uli526x_dynamic_reset(dev); + db->timer.expires = ULI526X_TIMER_WUT; + add_timer(&db->timer); + spin_unlock_irqrestore(&db->lock, flags); + return; + } + + /* Link status check, Dynamic media type change */ + if((phy_read(db->ioaddr, db->phy_addr, 5, db->chip_id) & 0x01e0)!=0) + tmp_cr12 = 3; + + if ( !(tmp_cr12 & 0x3) && !db->link_failed ) { + /* Link Failed */ + ULI526X_DBUG(0, "Link Failed", tmp_cr12); + netif_carrier_off(dev); + printk(KERN_INFO "uli526x: %s NIC Link is Down\n",dev->name); + db->link_failed = 1; + + /* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */ + /* AUTO don't need */ + if ( !(db->media_mode & 0x8) ) + phy_write(db->ioaddr, db->phy_addr, 0, 0x1000, db->chip_id); + + /* AUTO mode, if INT phyxcer link failed, select EXT device */ + if (db->media_mode & ULI526X_AUTO) { + db->cr6_data&=~0x00000200; /* bit9=0, HD mode */ + update_cr6(db->cr6_data, db->ioaddr); + } + } else + if ((tmp_cr12 & 0x3) && db->link_failed) { + ULI526X_DBUG(0, "Link link OK", tmp_cr12); + db->link_failed = 0; + + /* Auto Sense Speed */ + if ( (db->media_mode & ULI526X_AUTO) && + uli526x_sense_speed(db) ) + db->link_failed = 1; + uli526x_process_mode(db); + + if(db->link_failed==0) + { + if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD) + { + TmpSpeed = 100; + } + if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD) + { + printk(KERN_INFO "uli526x: %s NIC Link is Up %d Mbps Full duplex\n",dev->name,TmpSpeed); + } + else + { + printk(KERN_INFO "uli526x: %s NIC Link is Up %d Mbps Half duplex\n",dev->name,TmpSpeed); + } + netif_carrier_on(dev); + } + /* SHOW_MEDIA_TYPE(db->op_mode); */ + } + else if(!(tmp_cr12 & 0x3) && db->link_failed) + { + if(db->init==1) + { + printk(KERN_INFO "uli526x: %s NIC Link is Down\n",dev->name); + netif_carrier_off(dev); + } + } + db->init=0; + + /* Timer active again */ + db->timer.expires = ULI526X_TIMER_WUT; + add_timer(&db->timer); + spin_unlock_irqrestore(&db->lock, flags); +} + + +/* + * Dynamic reset the ULI526X board + * Stop ULI526X board + * Free Tx/Rx allocated memory + * Reset ULI526X board + * Re-initialize ULI526X board + */ + +static void uli526x_dynamic_reset(struct net_device *dev) +{ + struct uli526x_board_info *db = netdev_priv(dev); + + ULI526X_DBUG(0, "uli526x_dynamic_reset()", 0); + + /* Sopt MAC controller */ + db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); /* Disable Tx/Rx */ + update_cr6(db->cr6_data, dev->base_addr); + outl(0, dev->base_addr + DCR7); /* Disable Interrupt */ + outl(inl(dev->base_addr + DCR5), dev->base_addr + DCR5); + + /* Disable upper layer interface */ + netif_stop_queue(dev); + + /* Free Rx Allocate buffer */ + uli526x_free_rxbuffer(db); + + /* system variable init */ + db->tx_packet_cnt = 0; + db->rx_avail_cnt = 0; + db->link_failed = 1; + db->init=1; + db->wait_reset = 0; + + /* Re-initialize ULI526X board */ + uli526x_init(dev); + + /* Restart upper layer interface */ + netif_wake_queue(dev); +} + + +/* + * free all allocated rx buffer + */ + +static void uli526x_free_rxbuffer(struct uli526x_board_info * db) +{ + ULI526X_DBUG(0, "uli526x_free_rxbuffer()", 0); + + /* free allocated rx buffer */ + while (db->rx_avail_cnt) { + dev_kfree_skb(db->rx_ready_ptr->rx_skb_ptr); + db->rx_ready_ptr = db->rx_ready_ptr->next_rx_desc; + db->rx_avail_cnt--; + } +} + + +/* + * Reuse the SK buffer + */ + +static void uli526x_reuse_skb(struct uli526x_board_info *db, struct sk_buff * skb) +{ + struct rx_desc *rxptr = db->rx_insert_ptr; + + if (!(rxptr->rdes0 & cpu_to_le32(0x80000000))) { + rxptr->rx_skb_ptr = skb; + rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->tail, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) ); + wmb(); + rxptr->rdes0 = cpu_to_le32(0x80000000); + db->rx_avail_cnt++; + db->rx_insert_ptr = rxptr->next_rx_desc; + } else + ULI526X_DBUG(0, "SK Buffer reuse method error", db->rx_avail_cnt); +} + + +/* + * Initialize transmit/Receive descriptor + * Using Chain structure, and allocate Tx/Rx buffer + */ + +static void uli526x_descriptor_init(struct uli526x_board_info *db, unsigned long ioaddr) +{ + struct tx_desc *tmp_tx; + struct rx_desc *tmp_rx; + unsigned char *tmp_buf; + dma_addr_t tmp_tx_dma, tmp_rx_dma; + dma_addr_t tmp_buf_dma; + int i; + + ULI526X_DBUG(0, "uli526x_descriptor_init()", 0); + + /* tx descriptor start pointer */ + db->tx_insert_ptr = db->first_tx_desc; + db->tx_remove_ptr = db->first_tx_desc; + outl(db->first_tx_desc_dma, ioaddr + DCR4); /* TX DESC address */ + + /* rx descriptor start pointer */ + db->first_rx_desc = (void *)db->first_tx_desc + sizeof(struct tx_desc) * TX_DESC_CNT; + db->first_rx_desc_dma = db->first_tx_desc_dma + sizeof(struct tx_desc) * TX_DESC_CNT; + db->rx_insert_ptr = db->first_rx_desc; + db->rx_ready_ptr = db->first_rx_desc; + outl(db->first_rx_desc_dma, ioaddr + DCR3); /* RX DESC address */ + + /* Init Transmit chain */ + tmp_buf = db->buf_pool_start; + tmp_buf_dma = db->buf_pool_dma_start; + tmp_tx_dma = db->first_tx_desc_dma; + for (tmp_tx = db->first_tx_desc, i = 0; i < TX_DESC_CNT; i++, tmp_tx++) { + tmp_tx->tx_buf_ptr = tmp_buf; + tmp_tx->tdes0 = cpu_to_le32(0); + tmp_tx->tdes1 = cpu_to_le32(0x81000000); /* IC, chain */ + tmp_tx->tdes2 = cpu_to_le32(tmp_buf_dma); + tmp_tx_dma += sizeof(struct tx_desc); + tmp_tx->tdes3 = cpu_to_le32(tmp_tx_dma); + tmp_tx->next_tx_desc = tmp_tx + 1; + tmp_buf = tmp_buf + TX_BUF_ALLOC; + tmp_buf_dma = tmp_buf_dma + TX_BUF_ALLOC; + } + (--tmp_tx)->tdes3 = cpu_to_le32(db->first_tx_desc_dma); + tmp_tx->next_tx_desc = db->first_tx_desc; + + /* Init Receive descriptor chain */ + tmp_rx_dma=db->first_rx_desc_dma; + for (tmp_rx = db->first_rx_desc, i = 0; i < RX_DESC_CNT; i++, tmp_rx++) { + tmp_rx->rdes0 = cpu_to_le32(0); + tmp_rx->rdes1 = cpu_to_le32(0x01000600); + tmp_rx_dma += sizeof(struct rx_desc); + tmp_rx->rdes3 = cpu_to_le32(tmp_rx_dma); + tmp_rx->next_rx_desc = tmp_rx + 1; + } + (--tmp_rx)->rdes3 = cpu_to_le32(db->first_rx_desc_dma); + tmp_rx->next_rx_desc = db->first_rx_desc; + + /* pre-allocate Rx buffer */ + allocate_rx_buffer(db); +} + + +/* + * Update CR6 value + * Firstly stop ULI526X, then written value and start + */ + +static void update_cr6(u32 cr6_data, unsigned long ioaddr) +{ + + outl(cr6_data, ioaddr + DCR6); + udelay(5); +} + + +/* + * Send a setup frame for M5261/M5263 + * This setup frame initialize ULI526X address filter mode + */ + +static void send_filter_frame(struct net_device *dev, int mc_cnt) +{ + struct uli526x_board_info *db = netdev_priv(dev); + struct dev_mc_list *mcptr; + struct tx_desc *txptr; + u16 * addrptr; + u32 * suptr; + int i; + + ULI526X_DBUG(0, "send_filter_frame()", 0); + + txptr = db->tx_insert_ptr; + suptr = (u32 *) txptr->tx_buf_ptr; + + /* Node address */ + addrptr = (u16 *) dev->dev_addr; + *suptr++ = addrptr[0]; + *suptr++ = addrptr[1]; + *suptr++ = addrptr[2]; + + /* broadcast address */ + *suptr++ = 0xffff; + *suptr++ = 0xffff; + *suptr++ = 0xffff; + + /* fit the multicast address */ + for (mcptr = dev->mc_list, i = 0; i < mc_cnt; i++, mcptr = mcptr->next) { + addrptr = (u16 *) mcptr->dmi_addr; + *suptr++ = addrptr[0]; + *suptr++ = addrptr[1]; + *suptr++ = addrptr[2]; + } + + for (; i<14; i++) { + *suptr++ = 0xffff; + *suptr++ = 0xffff; + *suptr++ = 0xffff; + } + + /* prepare the setup frame */ + db->tx_insert_ptr = txptr->next_tx_desc; + txptr->tdes1 = cpu_to_le32(0x890000c0); + + /* Resource Check and Send the setup packet */ + if (db->tx_packet_cnt < TX_DESC_CNT) { + /* Resource Empty */ + db->tx_packet_cnt++; + txptr->tdes0 = cpu_to_le32(0x80000000); + update_cr6(db->cr6_data | 0x2000, dev->base_addr); + outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */ + update_cr6(db->cr6_data, dev->base_addr); + dev->trans_start = jiffies; + } else + printk(KERN_ERR DRV_NAME ": No Tx resource - Send_filter_frame!\n"); +} + + +/* + * Allocate rx buffer, + * As possible as allocate maxiumn Rx buffer + */ + +static void allocate_rx_buffer(struct uli526x_board_info *db) +{ + struct rx_desc *rxptr; + struct sk_buff *skb; + + rxptr = db->rx_insert_ptr; + + while(db->rx_avail_cnt < RX_DESC_CNT) { + if ( ( skb = dev_alloc_skb(RX_ALLOC_SIZE) ) == NULL ) + break; + rxptr->rx_skb_ptr = skb; /* FIXME (?) */ + rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->tail, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) ); + wmb(); + rxptr->rdes0 = cpu_to_le32(0x80000000); + rxptr = rxptr->next_rx_desc; + db->rx_avail_cnt++; + } + + db->rx_insert_ptr = rxptr; +} + + +/* + * Read one word data from the serial ROM + */ + +static u16 read_srom_word(long ioaddr, int offset) +{ + int i; + u16 srom_data = 0; + long cr9_ioaddr = ioaddr + DCR9; + + outl(CR9_SROM_READ, cr9_ioaddr); + outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); + + /* Send the Read Command 110b */ + SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr); + SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr); + SROM_CLK_WRITE(SROM_DATA_0, cr9_ioaddr); + + /* Send the offset */ + for (i = 5; i >= 0; i--) { + srom_data = (offset & (1 << i)) ? SROM_DATA_1 : SROM_DATA_0; + SROM_CLK_WRITE(srom_data, cr9_ioaddr); + } + + outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); + + for (i = 16; i > 0; i--) { + outl(CR9_SROM_READ | CR9_SRCS | CR9_SRCLK, cr9_ioaddr); + udelay(5); + srom_data = (srom_data << 1) | ((inl(cr9_ioaddr) & CR9_CRDOUT) ? 1 : 0); + outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); + udelay(5); + } + + outl(CR9_SROM_READ, cr9_ioaddr); + return srom_data; +} + + +/* + * Auto sense the media mode + */ + +static u8 uli526x_sense_speed(struct uli526x_board_info * db) +{ + u8 ErrFlag = 0; + u16 phy_mode; + + phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id); + phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id); + + if ( (phy_mode & 0x24) == 0x24 ) { + + phy_mode = ((phy_read(db->ioaddr, db->phy_addr, 5, db->chip_id) & 0x01e0)<<7); + if(phy_mode&0x8000) + phy_mode = 0x8000; + else if(phy_mode&0x4000) + phy_mode = 0x4000; + else if(phy_mode&0x2000) + phy_mode = 0x2000; + else + phy_mode = 0x1000; + + /* printk(DRV_NAME ": Phy_mode %x ",phy_mode); */ + switch (phy_mode) { + case 0x1000: db->op_mode = ULI526X_10MHF; break; + case 0x2000: db->op_mode = ULI526X_10MFD; break; + case 0x4000: db->op_mode = ULI526X_100MHF; break; + case 0x8000: db->op_mode = ULI526X_100MFD; break; + default: db->op_mode = ULI526X_10MHF; ErrFlag = 1; break; + } + } else { + db->op_mode = ULI526X_10MHF; + ULI526X_DBUG(0, "Link Failed :", phy_mode); + ErrFlag = 1; + } + + return ErrFlag; +} + + +/* + * Set 10/100 phyxcer capability + * AUTO mode : phyxcer register4 is NIC capability + * Force mode: phyxcer register4 is the force media + */ + +static void uli526x_set_phyxcer(struct uli526x_board_info *db) +{ + u16 phy_reg; + + /* Phyxcer capability setting */ + phy_reg = phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0; + + if (db->media_mode & ULI526X_AUTO) { + /* AUTO Mode */ + phy_reg |= db->PHY_reg4; + } else { + /* Force Mode */ + switch(db->media_mode) { + case ULI526X_10MHF: phy_reg |= 0x20; break; + case ULI526X_10MFD: phy_reg |= 0x40; break; + case ULI526X_100MHF: phy_reg |= 0x80; break; + case ULI526X_100MFD: phy_reg |= 0x100; break; + } + + } + + /* Write new capability to Phyxcer Reg4 */ + if ( !(phy_reg & 0x01e0)) { + phy_reg|=db->PHY_reg4; + db->media_mode|=ULI526X_AUTO; + } + phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id); + + /* Restart Auto-Negotiation */ + phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id); + udelay(50); +} + + +/* + * Process op-mode + AUTO mode : PHY controller in Auto-negotiation Mode + * Force mode: PHY controller in force mode with HUB + * N-way force capability with SWITCH + */ + +static void uli526x_process_mode(struct uli526x_board_info *db) +{ + u16 phy_reg; + + /* Full Duplex Mode Check */ + if (db->op_mode & 0x4) + db->cr6_data |= CR6_FDM; /* Set Full Duplex Bit */ + else + db->cr6_data &= ~CR6_FDM; /* Clear Full Duplex Bit */ + + update_cr6(db->cr6_data, db->ioaddr); + + /* 10/100M phyxcer force mode need */ + if ( !(db->media_mode & 0x8)) { + /* Forece Mode */ + phy_reg = phy_read(db->ioaddr, db->phy_addr, 6, db->chip_id); + if ( !(phy_reg & 0x1) ) { + /* parter without N-Way capability */ + phy_reg = 0x0; + switch(db->op_mode) { + case ULI526X_10MHF: phy_reg = 0x0; break; + case ULI526X_10MFD: phy_reg = 0x100; break; + case ULI526X_100MHF: phy_reg = 0x2000; break; + case ULI526X_100MFD: phy_reg = 0x2100; break; + } + phy_write(db->ioaddr, db->phy_addr, 0, phy_reg, db->chip_id); + phy_write(db->ioaddr, db->phy_addr, 0, phy_reg, db->chip_id); + } + } +} + + +/* + * Write a word to Phy register + */ + +static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data, u32 chip_id) +{ + u16 i; + unsigned long ioaddr; + + if(chip_id == PCI_ULI5263_ID) + { + phy_writeby_cr10(iobase, phy_addr, offset, phy_data); + return; + } + /* M5261/M5263 Chip */ + ioaddr = iobase + DCR9; + + /* Send 33 synchronization clock to Phy controller */ + for (i = 0; i < 35; i++) + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + + /* Send start command(01) to Phy */ + phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + + /* Send write command(01) to Phy */ + phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + + /* Send Phy address */ + for (i = 0x10; i > 0; i = i >> 1) + phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); + + /* Send register address */ + for (i = 0x10; i > 0; i = i >> 1) + phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); + + /* written trasnition */ + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); + + /* Write a word data to PHY controller */ + for ( i = 0x8000; i > 0; i >>= 1) + phy_write_1bit(ioaddr, phy_data & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); + +} + + +/* + * Read a word data from phy register + */ + +static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id) +{ + int i; + u16 phy_data; + unsigned long ioaddr; + + if(chip_id == PCI_ULI5263_ID) + return phy_readby_cr10(iobase, phy_addr, offset); + /* M5261/M5263 Chip */ + ioaddr = iobase + DCR9; + + /* Send 33 synchronization clock to Phy controller */ + for (i = 0; i < 35; i++) + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + + /* Send start command(01) to Phy */ + phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + + /* Send read command(10) to Phy */ + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); + + /* Send Phy address */ + for (i = 0x10; i > 0; i = i >> 1) + phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); + + /* Send register address */ + for (i = 0x10; i > 0; i = i >> 1) + phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); + + /* Skip transition state */ + phy_read_1bit(ioaddr, chip_id); + + /* read 16bit data */ + for (phy_data = 0, i = 0; i < 16; i++) { + phy_data <<= 1; + phy_data |= phy_read_1bit(ioaddr, chip_id); + } + + return phy_data; +} + +static u16 phy_readby_cr10(unsigned long iobase, u8 phy_addr, u8 offset) +{ + unsigned long ioaddr,cr10_value; + + ioaddr = iobase + DCR10; + cr10_value = phy_addr; + cr10_value = (cr10_value<<5) + offset; + cr10_value = (cr10_value<<16) + 0x08000000; + outl(cr10_value,ioaddr); + udelay(1); + while(1) + { + cr10_value = inl(ioaddr); + if(cr10_value&0x10000000) + break; + } + return (cr10_value&0x0ffff); +} + +static void phy_writeby_cr10(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data) +{ + unsigned long ioaddr,cr10_value; + + ioaddr = iobase + DCR10; + cr10_value = phy_addr; + cr10_value = (cr10_value<<5) + offset; + cr10_value = (cr10_value<<16) + 0x04000000 + phy_data; + outl(cr10_value,ioaddr); + udelay(1); +} +/* + * Write one bit data to Phy Controller + */ + +static void phy_write_1bit(unsigned long ioaddr, u32 phy_data, u32 chip_id) +{ + outl(phy_data , ioaddr); /* MII Clock Low */ + udelay(1); + outl(phy_data | MDCLKH, ioaddr); /* MII Clock High */ + udelay(1); + outl(phy_data , ioaddr); /* MII Clock Low */ + udelay(1); +} + + +/* + * Read one bit phy data from PHY controller + */ + +static u16 phy_read_1bit(unsigned long ioaddr, u32 chip_id) +{ + u16 phy_data; + + outl(0x50000 , ioaddr); + udelay(1); + phy_data = ( inl(ioaddr) >> 19 ) & 0x1; + outl(0x40000 , ioaddr); + udelay(1); + + return phy_data; +} + + +static struct pci_device_id uli526x_pci_tbl[] = { + { 0x10B9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5261_ID }, + { 0x10B9, 0x5263, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5263_ID }, + { 0, } +}; +MODULE_DEVICE_TABLE(pci, uli526x_pci_tbl); + + +static struct pci_driver uli526x_driver = { + .name = "uli526x", + .id_table = uli526x_pci_tbl, + .probe = uli526x_init_one, + .remove = __devexit_p(uli526x_remove_one), +}; + +MODULE_AUTHOR("Peer Chen, peer.chen@uli.com.tw"); +MODULE_DESCRIPTION("ULi M5261/M5263 fast ethernet driver"); +MODULE_LICENSE("GPL"); + +MODULE_PARM(debug, "i"); +MODULE_PARM(mode, "i"); +MODULE_PARM(cr6set, "i"); +MODULE_PARM_DESC(debug, "ULi M5261/M5263 enable debugging (0-1)"); +MODULE_PARM_DESC(mode, "ULi M5261/M5263: Bit 0: 10/100Mbps, bit 2: duplex, bit 8: HomePNA"); + +/* Description: + * when user used insmod to add module, system invoked init_module() + * to register the services. + */ + +static int __init uli526x_init_module(void) +{ + int rc; + + printk(version); + printed_version = 1; + + ULI526X_DBUG(0, "init_module() ", debug); + + if (debug) + uli526x_debug = debug; /* set debug flag */ + if (cr6set) + uli526x_cr6_user_set = cr6set; + + switch(mode) { + case ULI526X_10MHF: + case ULI526X_100MHF: + case ULI526X_10MFD: + case ULI526X_100MFD: + uli526x_media_mode = mode; + break; + default:uli526x_media_mode = ULI526X_AUTO; + break; + } + + rc = pci_module_init(&uli526x_driver); + if (rc < 0) + return rc; + + return 0; +} + + +/* + * Description: + * when user used rmmod to delete module, system invoked clean_module() + * to un-register all registered services. + */ + +static void __exit uli526x_cleanup_module(void) +{ + ULI526X_DBUG(0, "uli526x_clean_module() ", debug); + pci_unregister_driver(&uli526x_driver); +} + +module_init(uli526x_init_module); +module_exit(uli526x_cleanup_module); diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 6d864c502a1f..6b0e6464eb39 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -40,7 +40,7 @@ * FIXME: IO should be max 256 bytes. However, since we may * have a P2P bridge below a cardbus bridge, we need 4K. */ -#define CARDBUS_IO_SIZE (256) +#define CARDBUS_IO_SIZE (4*1024) #define CARDBUS_MEM_SIZE (32*1024*1024) static void __devinit diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 179c95c878ac..31065261de8e 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -189,7 +189,6 @@ static void ahci_irq_clear(struct ata_port *ap); static void ahci_eng_timeout(struct ata_port *ap); static int ahci_port_start(struct ata_port *ap); static void ahci_port_stop(struct ata_port *ap); -static void ahci_host_stop(struct ata_host_set *host_set); static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf); static void ahci_qc_prep(struct ata_queued_cmd *qc); static u8 ahci_check_status(struct ata_port *ap); @@ -242,7 +241,6 @@ static struct ata_port_operations ahci_ops = { .port_start = ahci_port_start, .port_stop = ahci_port_stop, - .host_stop = ahci_host_stop, }; static struct ata_port_info ahci_port_info[] = { @@ -296,17 +294,9 @@ static inline unsigned long ahci_port_base_ul (unsigned long base, unsigned int return base + 0x100 + (port * 0x80); } -static inline void *ahci_port_base (void *base, unsigned int port) +static inline void __iomem *ahci_port_base (void __iomem *base, unsigned int port) { - return (void *) ahci_port_base_ul((unsigned long)base, port); -} - -static void ahci_host_stop(struct ata_host_set *host_set) -{ - struct ahci_host_priv *hpriv = host_set->private_data; - kfree(hpriv); - - ata_host_stop(host_set); + return (void __iomem *) ahci_port_base_ul((unsigned long)base, port); } static int ahci_port_start(struct ata_port *ap) @@ -314,8 +304,9 @@ static int ahci_port_start(struct ata_port *ap) struct device *dev = ap->host_set->dev; struct ahci_host_priv *hpriv = ap->host_set->private_data; struct ahci_port_priv *pp; - void *mem, *mmio = ap->host_set->mmio_base; - void *port_mmio = ahci_port_base(mmio, ap->port_no); + void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); + void *mem; dma_addr_t mem_dma; pp = kmalloc(sizeof(*pp), GFP_KERNEL); @@ -383,8 +374,8 @@ static void ahci_port_stop(struct ata_port *ap) { struct device *dev = ap->host_set->dev; struct ahci_port_priv *pp = ap->private_data; - void *mmio = ap->host_set->mmio_base; - void *port_mmio = ahci_port_base(mmio, ap->port_no); + void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); u32 tmp; tmp = readl(port_mmio + PORT_CMD); @@ -546,8 +537,8 @@ static void ahci_qc_prep(struct ata_queued_cmd *qc) static void ahci_intr_error(struct ata_port *ap, u32 irq_stat) { - void *mmio = ap->host_set->mmio_base; - void *port_mmio = ahci_port_base(mmio, ap->port_no); + void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); u32 tmp; int work; @@ -595,8 +586,8 @@ static void ahci_intr_error(struct ata_port *ap, u32 irq_stat) static void ahci_eng_timeout(struct ata_port *ap) { struct ata_host_set *host_set = ap->host_set; - void *mmio = host_set->mmio_base; - void *port_mmio = ahci_port_base(mmio, ap->port_no); + void __iomem *mmio = host_set->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); struct ata_queued_cmd *qc; unsigned long flags; @@ -626,8 +617,8 @@ static void ahci_eng_timeout(struct ata_port *ap) static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc) { - void *mmio = ap->host_set->mmio_base; - void *port_mmio = ahci_port_base(mmio, ap->port_no); + void __iomem *mmio = ap->host_set->mmio_base; + void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); u32 status, serr, ci; serr = readl(port_mmio + PORT_SCR_ERR); @@ -663,7 +654,7 @@ static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs * struct ata_host_set *host_set = dev_instance; struct ahci_host_priv *hpriv; unsigned int i, handled = 0; - void *mmio; + void __iomem *mmio; u32 irq_stat, irq_ack = 0; VPRINTK("ENTER\n"); @@ -709,7 +700,7 @@ static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs * static int ahci_qc_issue(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; - void *port_mmio = (void *) ap->ioaddr.cmd_addr; + void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; writel(1, port_mmio + PORT_CMD_ISSUE); readl(port_mmio + PORT_CMD_ISSUE); /* flush */ @@ -894,7 +885,7 @@ static void ahci_print_info(struct ata_probe_ent *probe_ent) { struct ahci_host_priv *hpriv = probe_ent->private_data; struct pci_dev *pdev = to_pci_dev(probe_ent->dev); - void *mmio = probe_ent->mmio_base; + void __iomem *mmio = probe_ent->mmio_base; u32 vers, cap, impl, speed; const char *speed_s; u16 cc; @@ -967,7 +958,7 @@ static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) struct ata_probe_ent *probe_ent = NULL; struct ahci_host_priv *hpriv; unsigned long base; - void *mmio_base; + void __iomem *mmio_base; unsigned int board_idx = (unsigned int) ent->driver_data; int have_msi, pci_dev_busy = 0; int rc; @@ -1004,8 +995,7 @@ static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent->dev = pci_dev_to_dev(pdev); INIT_LIST_HEAD(&probe_ent->node); - mmio_base = ioremap(pci_resource_start(pdev, AHCI_PCI_BAR), - pci_resource_len(pdev, AHCI_PCI_BAR)); + mmio_base = pci_iomap(pdev, AHCI_PCI_BAR, 0); if (mmio_base == NULL) { rc = -ENOMEM; goto err_out_free_ent; @@ -1049,7 +1039,7 @@ static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) err_out_hpriv: kfree(hpriv); err_out_iounmap: - iounmap(mmio_base); + pci_iounmap(pdev, mmio_base); err_out_free_ent: kfree(probe_ent); err_out_msi: @@ -1089,7 +1079,8 @@ static void ahci_remove_one (struct pci_dev *pdev) scsi_host_put(ap->host); } - host_set->ops->host_stop(host_set); + kfree(hpriv); + pci_iounmap(pdev, host_set->mmio_base); kfree(host_set); if (have_msi) @@ -1106,7 +1097,6 @@ static int __init ahci_init(void) return pci_module_init(&ahci_pci_driver); } - static void __exit ahci_exit(void) { pci_unregister_driver(&ahci_pci_driver); diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index fb28c1261848..deec0cef88d9 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -583,8 +583,7 @@ static void pci_enable_intx(struct pci_dev *pdev) #define AHCI_ENABLE (1 << 31) static int piix_disable_ahci(struct pci_dev *pdev) { - void *mmio; - unsigned long addr; + void __iomem *mmio; u32 tmp; int rc = 0; @@ -592,11 +591,11 @@ static int piix_disable_ahci(struct pci_dev *pdev) * works because this device is usually set up by BIOS. */ - addr = pci_resource_start(pdev, AHCI_PCI_BAR); - if (!addr || !pci_resource_len(pdev, AHCI_PCI_BAR)) + if (!pci_resource_start(pdev, AHCI_PCI_BAR) || + !pci_resource_len(pdev, AHCI_PCI_BAR)) return 0; - mmio = ioremap(addr, 64); + mmio = pci_iomap(pdev, AHCI_PCI_BAR, 64); if (!mmio) return -ENOMEM; @@ -610,7 +609,7 @@ static int piix_disable_ahci(struct pci_dev *pdev) rc = -EIO; } - iounmap(mmio); + pci_iounmap(pdev, mmio); return rc; } diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index d824938d05c9..9fb9814525a3 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -4204,6 +4204,15 @@ ata_probe_ent_alloc(struct device *dev, struct ata_port_info *port) +#ifdef CONFIG_PCI + +void ata_pci_host_stop (struct ata_host_set *host_set) +{ + struct pci_dev *pdev = to_pci_dev(host_set->dev); + + pci_iounmap(pdev, host_set->mmio_base); +} + /** * ata_pci_init_native_mode - Initialize native-mode driver * @pdev: pci device to be initialized @@ -4216,7 +4225,6 @@ ata_probe_ent_alloc(struct device *dev, struct ata_port_info *port) * ata_probe_ent structure should then be freed with kfree(). */ -#ifdef CONFIG_PCI struct ata_probe_ent * ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port) { @@ -4599,6 +4607,7 @@ EXPORT_SYMBOL_GPL(ata_scsi_simulate); #ifdef CONFIG_PCI EXPORT_SYMBOL_GPL(pci_test_config_bits); +EXPORT_SYMBOL_GPL(ata_pci_host_stop); EXPORT_SYMBOL_GPL(ata_pci_init_native_mode); EXPORT_SYMBOL_GPL(ata_pci_init_one); EXPORT_SYMBOL_GPL(ata_pci_remove_one); diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index 03d9bc6e69df..a1d62dee3be6 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -351,6 +351,7 @@ static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) static void nv_host_stop (struct ata_host_set *host_set) { struct nv_host *host = host_set->private_data; + struct pci_dev *pdev = to_pci_dev(host_set->dev); // Disable hotplug event interrupts. if (host->host_desc->disable_hotplug) @@ -358,7 +359,8 @@ static void nv_host_stop (struct ata_host_set *host_set) kfree(host); - ata_host_stop(host_set); + if (host_set->mmio_base) + pci_iounmap(pdev, host_set->mmio_base); } static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) @@ -420,8 +422,7 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO) { unsigned long base; - probe_ent->mmio_base = ioremap(pci_resource_start(pdev, 5), - pci_resource_len(pdev, 5)); + probe_ent->mmio_base = pci_iomap(pdev, 5, 0); if (probe_ent->mmio_base == NULL) { rc = -EIO; goto err_out_free_host; @@ -457,7 +458,7 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) err_out_iounmap: if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO) - iounmap(probe_ent->mmio_base); + pci_iounmap(pdev, probe_ent->mmio_base); err_out_free_host: kfree(host); err_out_free_ent: diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index 7c4f6ecc1cc9..538ad727bd2e 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -92,6 +92,7 @@ static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf); static void pdc_irq_clear(struct ata_port *ap); static int pdc_qc_issue_prot(struct ata_queued_cmd *qc); + static Scsi_Host_Template pdc_ata_sht = { .module = THIS_MODULE, .name = DRV_NAME, @@ -132,7 +133,7 @@ static struct ata_port_operations pdc_sata_ops = { .scr_write = pdc_sata_scr_write, .port_start = pdc_port_start, .port_stop = pdc_port_stop, - .host_stop = ata_host_stop, + .host_stop = ata_pci_host_stop, }; static struct ata_port_operations pdc_pata_ops = { @@ -153,7 +154,7 @@ static struct ata_port_operations pdc_pata_ops = { .port_start = pdc_port_start, .port_stop = pdc_port_stop, - .host_stop = ata_host_stop, + .host_stop = ata_pci_host_stop, }; static struct ata_port_info pdc_port_info[] = { @@ -282,7 +283,7 @@ static void pdc_port_stop(struct ata_port *ap) static void pdc_reset_port(struct ata_port *ap) { - void *mmio = (void *) ap->ioaddr.cmd_addr + PDC_CTLSTAT; + void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr + PDC_CTLSTAT; unsigned int i; u32 tmp; @@ -418,7 +419,7 @@ static inline unsigned int pdc_host_intr( struct ata_port *ap, u8 status; unsigned int handled = 0, have_err = 0; u32 tmp; - void *mmio = (void *) ap->ioaddr.cmd_addr + PDC_GLOBAL_CTL; + void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr + PDC_GLOBAL_CTL; tmp = readl(mmio); if (tmp & PDC_ERR_MASK) { @@ -447,7 +448,7 @@ static inline unsigned int pdc_host_intr( struct ata_port *ap, static void pdc_irq_clear(struct ata_port *ap) { struct ata_host_set *host_set = ap->host_set; - void *mmio = host_set->mmio_base; + void __iomem *mmio = host_set->mmio_base; readl(mmio + PDC_INT_SEQMASK); } @@ -459,7 +460,7 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance, struct pt_regs *r u32 mask = 0; unsigned int i, tmp; unsigned int handled = 0; - void *mmio_base; + void __iomem *mmio_base; VPRINTK("ENTER\n"); @@ -581,7 +582,7 @@ static void pdc_ata_setup_port(struct ata_ioports *port, unsigned long base) static void pdc_host_init(unsigned int chip_id, struct ata_probe_ent *pe) { - void *mmio = pe->mmio_base; + void __iomem *mmio = pe->mmio_base; u32 tmp; /* @@ -624,7 +625,7 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e static int printed_version; struct ata_probe_ent *probe_ent = NULL; unsigned long base; - void *mmio_base; + void __iomem *mmio_base; unsigned int board_idx = (unsigned int) ent->driver_data; int pci_dev_busy = 0; int rc; @@ -663,8 +664,7 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e probe_ent->dev = pci_dev_to_dev(pdev); INIT_LIST_HEAD(&probe_ent->node); - mmio_base = ioremap(pci_resource_start(pdev, 3), - pci_resource_len(pdev, 3)); + mmio_base = pci_iomap(pdev, 3, 0); if (mmio_base == NULL) { rc = -ENOMEM; goto err_out_free_ent; diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index 9c99ab433bd3..029c2482e127 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -538,11 +538,12 @@ static void qs_port_stop(struct ata_port *ap) static void qs_host_stop(struct ata_host_set *host_set) { void __iomem *mmio_base = host_set->mmio_base; + struct pci_dev *pdev = to_pci_dev(host_set->dev); writeb(0, mmio_base + QS_HCT_CTRL); /* disable host interrupts */ writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */ - ata_host_stop(host_set); + pci_iounmap(pdev, mmio_base); } static void qs_host_init(unsigned int chip_id, struct ata_probe_ent *pe) @@ -646,8 +647,7 @@ static int qs_ata_init_one(struct pci_dev *pdev, goto err_out_regions; } - mmio_base = ioremap(pci_resource_start(pdev, 4), - pci_resource_len(pdev, 4)); + mmio_base = pci_iomap(pdev, 4, 0); if (mmio_base == NULL) { rc = -ENOMEM; goto err_out_regions; @@ -697,7 +697,7 @@ static int qs_ata_init_one(struct pci_dev *pdev, return 0; err_out_iounmap: - iounmap(mmio_base); + pci_iounmap(pdev, mmio_base); err_out_regions: pci_release_regions(pdev); err_out: diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index 71d49548f0a3..ba98a175ee3a 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -86,6 +86,7 @@ static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg); static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); static void sil_post_set_mode (struct ata_port *ap); + static struct pci_device_id sil_pci_tbl[] = { { 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w }, { 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w }, @@ -172,7 +173,7 @@ static struct ata_port_operations sil_ops = { .scr_write = sil_scr_write, .port_start = ata_port_start, .port_stop = ata_port_stop, - .host_stop = ata_host_stop, + .host_stop = ata_pci_host_stop, }; static struct ata_port_info sil_port_info[] = { @@ -231,6 +232,7 @@ MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, sil_pci_tbl); MODULE_VERSION(DRV_VERSION); + static unsigned char sil_get_device_cache_line(struct pci_dev *pdev) { u8 cache_line = 0; @@ -242,7 +244,8 @@ static void sil_post_set_mode (struct ata_port *ap) { struct ata_host_set *host_set = ap->host_set; struct ata_device *dev; - void *addr = host_set->mmio_base + sil_port[ap->port_no].xfer_mode; + void __iomem *addr = + host_set->mmio_base + sil_port[ap->port_no].xfer_mode; u32 tmp, dev_mode[2]; unsigned int i; @@ -375,7 +378,7 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) static int printed_version; struct ata_probe_ent *probe_ent = NULL; unsigned long base; - void *mmio_base; + void __iomem *mmio_base; int rc; unsigned int i; int pci_dev_busy = 0; @@ -425,8 +428,7 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent->irq_flags = SA_SHIRQ; probe_ent->host_flags = sil_port_info[ent->driver_data].host_flags; - mmio_base = ioremap(pci_resource_start(pdev, 5), - pci_resource_len(pdev, 5)); + mmio_base = pci_iomap(pdev, 5, 0); if (mmio_base == NULL) { rc = -ENOMEM; goto err_out_free_ent; diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c index 19d3bb3b0fb6..d89d968bedac 100644 --- a/drivers/scsi/sata_svw.c +++ b/drivers/scsi/sata_svw.c @@ -318,7 +318,7 @@ static struct ata_port_operations k2_sata_ops = { .scr_write = k2_sata_scr_write, .port_start = ata_port_start, .port_stop = ata_port_stop, - .host_stop = ata_host_stop, + .host_stop = ata_pci_host_stop, }; static void k2_sata_setup_port(struct ata_ioports *port, unsigned long base) @@ -346,7 +346,7 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e static int printed_version; struct ata_probe_ent *probe_ent = NULL; unsigned long base; - void *mmio_base; + void __iomem *mmio_base; int pci_dev_busy = 0; int rc; int i; @@ -392,8 +392,7 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e probe_ent->dev = pci_dev_to_dev(pdev); INIT_LIST_HEAD(&probe_ent->node); - mmio_base = ioremap(pci_resource_start(pdev, 5), - pci_resource_len(pdev, 5)); + mmio_base = pci_iomap(pdev, 5, 0); if (mmio_base == NULL) { rc = -ENOMEM; goto err_out_free_ent; diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index c72fcc46f0fa..540a85191172 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -245,13 +245,14 @@ static struct pci_driver pdc_sata_pci_driver = { static void pdc20621_host_stop(struct ata_host_set *host_set) { + struct pci_dev *pdev = to_pci_dev(host_set->dev); struct pdc_host_priv *hpriv = host_set->private_data; void *dimm_mmio = hpriv->dimm_mmio; - iounmap(dimm_mmio); + pci_iounmap(pdev, dimm_mmio); kfree(hpriv); - ata_host_stop(host_set); + pci_iounmap(pdev, host_set->mmio_base); } static int pdc_port_start(struct ata_port *ap) @@ -451,9 +452,9 @@ static void pdc20621_dma_prep(struct ata_queued_cmd *qc) struct scatterlist *sg = qc->sg; struct ata_port *ap = qc->ap; struct pdc_port_priv *pp = ap->private_data; - void *mmio = ap->host_set->mmio_base; + void __iomem *mmio = ap->host_set->mmio_base; struct pdc_host_priv *hpriv = ap->host_set->private_data; - void *dimm_mmio = hpriv->dimm_mmio; + void __iomem *dimm_mmio = hpriv->dimm_mmio; unsigned int portno = ap->port_no; unsigned int i, last, idx, total_len = 0, sgt_len; u32 *buf = (u32 *) &pp->dimm_buf[PDC_DIMM_HEADER_SZ]; @@ -513,9 +514,9 @@ static void pdc20621_nodata_prep(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct pdc_port_priv *pp = ap->private_data; - void *mmio = ap->host_set->mmio_base; + void __iomem *mmio = ap->host_set->mmio_base; struct pdc_host_priv *hpriv = ap->host_set->private_data; - void *dimm_mmio = hpriv->dimm_mmio; + void __iomem *dimm_mmio = hpriv->dimm_mmio; unsigned int portno = ap->port_no; unsigned int i; @@ -565,7 +566,7 @@ static void __pdc20621_push_hdma(struct ata_queued_cmd *qc, { struct ata_port *ap = qc->ap; struct ata_host_set *host_set = ap->host_set; - void *mmio = host_set->mmio_base; + void __iomem *mmio = host_set->mmio_base; /* hard-code chip #0 */ mmio += PDC_CHIP0_OFS; @@ -639,7 +640,7 @@ static void pdc20621_packet_start(struct ata_queued_cmd *qc) struct ata_port *ap = qc->ap; struct ata_host_set *host_set = ap->host_set; unsigned int port_no = ap->port_no; - void *mmio = host_set->mmio_base; + void __iomem *mmio = host_set->mmio_base; unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); u8 seq = (u8) (port_no + 1); unsigned int port_ofs; @@ -699,7 +700,7 @@ static int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc) static inline unsigned int pdc20621_host_intr( struct ata_port *ap, struct ata_queued_cmd *qc, unsigned int doing_hdma, - void *mmio) + void __iomem *mmio) { unsigned int port_no = ap->port_no; unsigned int port_ofs = @@ -778,7 +779,7 @@ static inline unsigned int pdc20621_host_intr( struct ata_port *ap, static void pdc20621_irq_clear(struct ata_port *ap) { struct ata_host_set *host_set = ap->host_set; - void *mmio = host_set->mmio_base; + void __iomem *mmio = host_set->mmio_base; mmio += PDC_CHIP0_OFS; @@ -792,7 +793,7 @@ static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance, struct pt_re u32 mask = 0; unsigned int i, tmp, port_no; unsigned int handled = 0; - void *mmio_base; + void __iomem *mmio_base; VPRINTK("ENTER\n"); @@ -940,9 +941,9 @@ static void pdc20621_get_from_dimm(struct ata_probe_ent *pe, void *psource, u16 idx; u8 page_mask; long dist; - void *mmio = pe->mmio_base; + void __iomem *mmio = pe->mmio_base; struct pdc_host_priv *hpriv = pe->private_data; - void *dimm_mmio = hpriv->dimm_mmio; + void __iomem *dimm_mmio = hpriv->dimm_mmio; /* hard-code chip #0 */ mmio += PDC_CHIP0_OFS; @@ -996,9 +997,9 @@ static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource, u16 idx; u8 page_mask; long dist; - void *mmio = pe->mmio_base; + void __iomem *mmio = pe->mmio_base; struct pdc_host_priv *hpriv = pe->private_data; - void *dimm_mmio = hpriv->dimm_mmio; + void __iomem *dimm_mmio = hpriv->dimm_mmio; /* hard-code chip #0 */ mmio += PDC_CHIP0_OFS; @@ -1044,7 +1045,7 @@ static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource, static unsigned int pdc20621_i2c_read(struct ata_probe_ent *pe, u32 device, u32 subaddr, u32 *pdata) { - void *mmio = pe->mmio_base; + void __iomem *mmio = pe->mmio_base; u32 i2creg = 0; u32 status; u32 count =0; @@ -1103,7 +1104,7 @@ static int pdc20621_prog_dimm0(struct ata_probe_ent *pe) u32 data = 0; int size, i; u8 bdimmsize; - void *mmio = pe->mmio_base; + void __iomem *mmio = pe->mmio_base; static const struct { unsigned int reg; unsigned int ofs; @@ -1166,7 +1167,7 @@ static unsigned int pdc20621_prog_dimm_global(struct ata_probe_ent *pe) { u32 data, spd0; int error, i; - void *mmio = pe->mmio_base; + void __iomem *mmio = pe->mmio_base; /* hard-code chip #0 */ mmio += PDC_CHIP0_OFS; @@ -1220,7 +1221,7 @@ static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe) u32 ticks=0; u32 clock=0; u32 fparam=0; - void *mmio = pe->mmio_base; + void __iomem *mmio = pe->mmio_base; /* hard-code chip #0 */ mmio += PDC_CHIP0_OFS; @@ -1344,7 +1345,7 @@ static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe) static void pdc_20621_init(struct ata_probe_ent *pe) { u32 tmp; - void *mmio = pe->mmio_base; + void __iomem *mmio = pe->mmio_base; /* hard-code chip #0 */ mmio += PDC_CHIP0_OFS; @@ -1377,7 +1378,8 @@ static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id * static int printed_version; struct ata_probe_ent *probe_ent = NULL; unsigned long base; - void *mmio_base, *dimm_mmio = NULL; + void __iomem *mmio_base; + void __iomem *dimm_mmio = NULL; struct pdc_host_priv *hpriv = NULL; unsigned int board_idx = (unsigned int) ent->driver_data; int pci_dev_busy = 0; @@ -1417,8 +1419,7 @@ static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id * probe_ent->dev = pci_dev_to_dev(pdev); INIT_LIST_HEAD(&probe_ent->node); - mmio_base = ioremap(pci_resource_start(pdev, 3), - pci_resource_len(pdev, 3)); + mmio_base = pci_iomap(pdev, 3, 0); if (mmio_base == NULL) { rc = -ENOMEM; goto err_out_free_ent; @@ -1432,8 +1433,7 @@ static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id * } memset(hpriv, 0, sizeof(*hpriv)); - dimm_mmio = ioremap(pci_resource_start(pdev, 4), - pci_resource_len(pdev, 4)); + dimm_mmio = pci_iomap(pdev, 4, 0); if (!dimm_mmio) { kfree(hpriv); rc = -ENOMEM; @@ -1480,9 +1480,9 @@ static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id * err_out_iounmap_dimm: /* only get to this label if 20621 */ kfree(hpriv); - iounmap(dimm_mmio); + pci_iounmap(pdev, dimm_mmio); err_out_iounmap: - iounmap(mmio_base); + pci_iounmap(pdev, mmio_base); err_out_free_ent: kfree(probe_ent); err_out_regions: diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index 3985f344da4d..cf94e0158a8d 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -252,7 +252,7 @@ static struct ata_port_operations vsc_sata_ops = { .scr_write = vsc_sata_scr_write, .port_start = ata_port_start, .port_stop = ata_port_stop, - .host_stop = ata_host_stop, + .host_stop = ata_pci_host_stop, }; static void __devinit vsc_sata_setup_port(struct ata_ioports *port, unsigned long base) @@ -326,8 +326,7 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d probe_ent->dev = pci_dev_to_dev(pdev); INIT_LIST_HEAD(&probe_ent->node); - mmio_base = ioremap(pci_resource_start(pdev, 0), - pci_resource_len(pdev, 0)); + mmio_base = pci_iomap(pdev, 0, 0); if (mmio_base == NULL) { rc = -ENOMEM; goto err_out_free_ent; diff --git a/fs/jfs/namei.c b/fs/jfs/namei.c index 1cae14e741eb..49ccde3937f9 100644 --- a/fs/jfs/namei.c +++ b/fs/jfs/namei.c @@ -1390,6 +1390,8 @@ static struct dentry *jfs_lookup(struct inode *dip, struct dentry *dentry, struc jfs_info("jfs_lookup: name = %s", name); + if (JFS_SBI(dip->i_sb)->mntflag & JFS_OS2) + dentry->d_op = &jfs_ci_dentry_operations; if ((name[0] == '.') && (len == 1)) inum = dip->i_ino; @@ -1417,9 +1419,6 @@ static struct dentry *jfs_lookup(struct inode *dip, struct dentry *dentry, struc return ERR_PTR(-EACCES); } - if (JFS_SBI(dip->i_sb)->mntflag & JFS_OS2) - dentry->d_op = &jfs_ci_dentry_operations; - dentry = d_splice_alias(ip, dentry); if (dentry && (JFS_SBI(dip->i_sb)->mntflag & JFS_OS2)) diff --git a/include/linux/libata.h b/include/linux/libata.h index 1eaba4077e15..022105c745fc 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -449,6 +449,7 @@ struct pci_bits { unsigned long val; }; +extern void ata_pci_host_stop (struct ata_host_set *host_set); extern struct ata_probe_ent * ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port); extern int pci_test_config_bits(struct pci_dev *pdev, struct pci_bits *bits); diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 499a5325f67f..d513c1634006 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2145,6 +2145,7 @@ #define PCI_DEVICE_ID_ENE_1225 0x1225 #define PCI_DEVICE_ID_ENE_1410 0x1410 #define PCI_DEVICE_ID_ENE_1420 0x1420 +#define PCI_VENDOR_ID_CHELSIO 0x1425 #define PCI_VENDOR_ID_SYBA 0x1592 #define PCI_DEVICE_ID_SYBA_2P_EPP 0x0782 diff --git a/include/linux/sound.h b/include/linux/sound.h index 428f59794f48..72b9af4c3fd4 100644 --- a/include/linux/sound.h +++ b/include/linux/sound.h @@ -29,7 +29,9 @@ * Sound core interface functions */ +struct device; extern int register_sound_special(struct file_operations *fops, int unit); +extern int register_sound_special_device(struct file_operations *fops, int unit, struct device *dev); extern int register_sound_mixer(struct file_operations *fops, int dev); extern int register_sound_midi(struct file_operations *fops, int dev); extern int register_sound_dsp(struct file_operations *fops, int dev); diff --git a/include/net/inet_connection_sock.h b/include/net/inet_connection_sock.h index 8a87a3a4f107..651f824c1008 100644 --- a/include/net/inet_connection_sock.h +++ b/include/net/inet_connection_sock.h @@ -147,7 +147,7 @@ static inline void inet_csk_clear_xmit_timer(struct sock *sk, const int what) } #ifdef INET_CSK_DEBUG else { - pr_debug(inet_csk_timer_bug_msg); + pr_debug("%s", inet_csk_timer_bug_msg); } #endif } @@ -180,7 +180,7 @@ static inline void inet_csk_reset_xmit_timer(struct sock *sk, const int what, } #ifdef INET_CSK_DEBUG else { - pr_debug(inet_csk_timer_bug_msg); + pr_debug("%s", inet_csk_timer_bug_msg); } #endif } diff --git a/include/sound/ac97_codec.h b/include/sound/ac97_codec.h index 1309c12b8f71..2857cf0472df 100644 --- a/include/sound/ac97_codec.h +++ b/include/sound/ac97_codec.h @@ -26,6 +26,7 @@ */ #include <linux/bitops.h> +#include <linux/device.h> #include "pcm.h" #include "control.h" #include "info.h" @@ -374,6 +375,9 @@ #define AC97_HAS_NO_PC_BEEP (1<<12) /* no PC Beep volume */ #define AC97_HAS_NO_VIDEO (1<<13) /* no Video volume */ #define AC97_HAS_NO_CD (1<<14) /* no CD volume */ +#define AC97_HAS_NO_MIC (1<<15) /* no MIC volume */ +#define AC97_HAS_NO_TONE (1<<16) /* no Tone volume */ +#define AC97_HAS_NO_STD_PCM (1<<17) /* no standard AC97 PCM volume and mute */ /* rates indexes */ #define AC97_RATES_FRONT_DAC 0 @@ -520,6 +524,7 @@ struct _snd_ac97 { /* jack-sharing info */ unsigned char indep_surround; unsigned char channel_mode; + struct device dev; }; /* conditions */ @@ -599,4 +604,8 @@ struct ac97_enum { unsigned short mask; const char **texts; }; + +/* ad hoc AC97 device driver access */ +extern struct bus_type ac97_bus_type; + #endif /* __SOUND_AC97_CODEC_H */ diff --git a/include/sound/ad1816a.h b/include/sound/ad1816a.h index 395978e375cf..ca2e0e4fa937 100644 --- a/include/sound/ad1816a.h +++ b/include/sound/ad1816a.h @@ -138,6 +138,7 @@ struct _snd_ad1816a { spinlock_t lock; unsigned short mode; + unsigned int clock_freq; snd_card_t *card; snd_pcm_t *pcm; diff --git a/include/sound/asound.h b/include/sound/asound.h index 9974f83cca44..8e552d627fa5 100644 --- a/include/sound/asound.h +++ b/include/sound/asound.h @@ -560,7 +560,7 @@ enum { * Timer section - /dev/snd/timer */ -#define SNDRV_TIMER_VERSION SNDRV_PROTOCOL_VERSION(2, 0, 4) +#define SNDRV_TIMER_VERSION SNDRV_PROTOCOL_VERSION(2, 0, 5) enum sndrv_timer_class { SNDRV_TIMER_CLASS_NONE = -1, @@ -693,11 +693,15 @@ enum sndrv_timer_event { SNDRV_TIMER_EVENT_CONTINUE, /* val = resolution in ns */ SNDRV_TIMER_EVENT_PAUSE, /* val = 0 */ SNDRV_TIMER_EVENT_EARLY, /* val = 0, early event */ + SNDRV_TIMER_EVENT_SUSPEND, /* val = 0 */ + SNDRV_TIMER_EVENT_RESUME, /* val = resolution in ns */ /* master timer events for slave timer instances */ SNDRV_TIMER_EVENT_MSTART = SNDRV_TIMER_EVENT_START + 10, SNDRV_TIMER_EVENT_MSTOP = SNDRV_TIMER_EVENT_STOP + 10, SNDRV_TIMER_EVENT_MCONTINUE = SNDRV_TIMER_EVENT_CONTINUE + 10, SNDRV_TIMER_EVENT_MPAUSE = SNDRV_TIMER_EVENT_PAUSE + 10, + SNDRV_TIMER_EVENT_MSUSPEND = SNDRV_TIMER_EVENT_SUSPEND + 10, + SNDRV_TIMER_EVENT_MRESUME = SNDRV_TIMER_EVENT_RESUME + 10, }; struct sndrv_timer_tread { diff --git a/include/sound/cs46xx.h b/include/sound/cs46xx.h index 182dd276ee74..9b94510eda60 100644 --- a/include/sound/cs46xx.h +++ b/include/sound/cs46xx.h @@ -1748,7 +1748,7 @@ int snd_cs46xx_pcm(cs46xx_t *chip, int device, snd_pcm_t **rpcm); int snd_cs46xx_pcm_rear(cs46xx_t *chip, int device, snd_pcm_t **rpcm); int snd_cs46xx_pcm_iec958(cs46xx_t *chip, int device, snd_pcm_t **rpcm); int snd_cs46xx_pcm_center_lfe(cs46xx_t *chip, int device, snd_pcm_t **rpcm); -int snd_cs46xx_mixer(cs46xx_t *chip); +int snd_cs46xx_mixer(cs46xx_t *chip, int spdif_device); int snd_cs46xx_midi(cs46xx_t *chip, int device, snd_rawmidi_t **rmidi); int snd_cs46xx_start_dsp(cs46xx_t *chip); int snd_cs46xx_gameport(cs46xx_t *chip); diff --git a/include/sound/emu10k1.h b/include/sound/emu10k1.h index c2ef3f023687..4e3993dfcefe 100644 --- a/include/sound/emu10k1.h +++ b/include/sound/emu10k1.h @@ -1178,7 +1178,7 @@ int snd_p16v_free(emu10k1_t * emu); int snd_p16v_mixer(emu10k1_t * emu); int snd_emu10k1_pcm_multi(emu10k1_t * emu, int device, snd_pcm_t ** rpcm); int snd_emu10k1_fx8010_pcm(emu10k1_t * emu, int device, snd_pcm_t ** rpcm); -int snd_emu10k1_mixer(emu10k1_t * emu); +int snd_emu10k1_mixer(emu10k1_t * emu, int pcm_device, int multi_device); int snd_emu10k1_timer(emu10k1_t * emu, int device); int snd_emu10k1_fx8010_new(emu10k1_t *emu, int device, snd_hwdep_t ** rhwdep); diff --git a/include/sound/gus.h b/include/sound/gus.h index b4b461ca173d..7000d9d9199d 100644 --- a/include/sound/gus.h +++ b/include/sound/gus.h @@ -512,13 +512,13 @@ extern void snd_gf1_ctrl_stop(snd_gus_card_t * gus, unsigned char reg); extern void snd_gf1_write8(snd_gus_card_t * gus, unsigned char reg, unsigned char data); extern unsigned char snd_gf1_look8(snd_gus_card_t * gus, unsigned char reg); -extern inline unsigned char snd_gf1_read8(snd_gus_card_t * gus, unsigned char reg) +static inline unsigned char snd_gf1_read8(snd_gus_card_t * gus, unsigned char reg) { return snd_gf1_look8(gus, reg | 0x80); } extern void snd_gf1_write16(snd_gus_card_t * gus, unsigned char reg, unsigned int data); extern unsigned short snd_gf1_look16(snd_gus_card_t * gus, unsigned char reg); -extern inline unsigned short snd_gf1_read16(snd_gus_card_t * gus, unsigned char reg) +static inline unsigned short snd_gf1_read16(snd_gus_card_t * gus, unsigned char reg) { return snd_gf1_look16(gus, reg | 0x80); } @@ -532,12 +532,12 @@ extern void snd_gf1_i_ctrl_stop(snd_gus_card_t * gus, unsigned char reg); extern void snd_gf1_i_write8(snd_gus_card_t * gus, unsigned char reg, unsigned char data); extern unsigned char snd_gf1_i_look8(snd_gus_card_t * gus, unsigned char reg); extern void snd_gf1_i_write16(snd_gus_card_t * gus, unsigned char reg, unsigned int data); -extern inline unsigned char snd_gf1_i_read8(snd_gus_card_t * gus, unsigned char reg) +static inline unsigned char snd_gf1_i_read8(snd_gus_card_t * gus, unsigned char reg) { return snd_gf1_i_look8(gus, reg | 0x80); } extern unsigned short snd_gf1_i_look16(snd_gus_card_t * gus, unsigned char reg); -extern inline unsigned short snd_gf1_i_read16(snd_gus_card_t * gus, unsigned char reg) +static inline unsigned short snd_gf1_i_read16(snd_gus_card_t * gus, unsigned char reg) { return snd_gf1_i_look16(gus, reg | 0x80); } diff --git a/include/sound/pcm.h b/include/sound/pcm.h index d935417575b5..fa23ebfb857a 100644 --- a/include/sound/pcm.h +++ b/include/sound/pcm.h @@ -379,7 +379,6 @@ struct _snd_pcm_substream { unsigned int dma_buf_id; size_t dma_max; /* -- hardware operations -- */ - unsigned int open_flag: 1; /* lowlevel device has been opened */ snd_pcm_ops_t *ops; /* -- runtime information -- */ snd_pcm_runtime_t *runtime; diff --git a/include/sound/version.h b/include/sound/version.h index c085136f391f..8d19bfabb7e0 100644 --- a/include/sound/version.h +++ b/include/sound/version.h @@ -1,3 +1,3 @@ /* include/version.h. Generated by configure. */ -#define CONFIG_SND_VERSION "1.0.9b" -#define CONFIG_SND_DATE " (Thu Jul 28 12:20:13 2005 UTC)" +#define CONFIG_SND_VERSION "1.0.10rc1" +#define CONFIG_SND_DATE " (Tue Aug 30 05:31:08 2005 UTC)" diff --git a/include/sound/ymfpci.h b/include/sound/ymfpci.h index 4b570684a6aa..9a3c1e6c820a 100644 --- a/include/sound/ymfpci.h +++ b/include/sound/ymfpci.h @@ -295,6 +295,7 @@ struct _snd_ymfpci_pcm { unsigned int running: 1; unsigned int output_front: 1; unsigned int output_rear: 1; + unsigned int update_pcm_vol; u32 period_size; /* cached from runtime->period_size */ u32 buffer_size; /* cached from runtime->buffer_size */ u32 period_pos; @@ -367,6 +368,11 @@ struct _snd_ymfpci { int mode_dup4ch; int rear_opened; int spdif_opened; + struct { + u16 left; + u16 right; + snd_kcontrol_t *ctl; + } pcm_mixer[32]; spinlock_t reg_lock; spinlock_t voice_lock; diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c index 46052304e230..29450befb5da 100644 --- a/sound/arm/pxa2xx-ac97.c +++ b/sound/arm/pxa2xx-ac97.c @@ -132,9 +132,9 @@ static void pxa2xx_ac97_reset(ac97_t *ac97) udelay(10); GCR |= GCR_WARM_RST; pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT); - udelay(50); + udelay(500); #else - GCR |= GCR_WARM_RST|GCR_PRIRDY_IEN|GCR_SECRDY_IEN;; + GCR |= GCR_WARM_RST|GCR_PRIRDY_IEN|GCR_SECRDY_IEN; wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1); #endif @@ -261,7 +261,7 @@ static int pxa2xx_ac97_do_suspend(snd_card_t *card, unsigned int state) return 0; } -static int pxa2xx_ac97_do_resume(snd_card_t *card, unsigned int state) +static int pxa2xx_ac97_do_resume(snd_card_t *card) { if (card->power_state != SNDRV_CTL_POWER_D0) { pxa2xx_audio_ops_t *platform_ops = card->dev->platform_data; @@ -275,13 +275,13 @@ static int pxa2xx_ac97_do_resume(snd_card_t *card, unsigned int state) return 0; } -static int pxa2xx_ac97_suspend(struct device *_dev, u32 state, u32 level) +static int pxa2xx_ac97_suspend(struct device *_dev, pm_message_t state, u32 level) { snd_card_t *card = dev_get_drvdata(_dev); int ret = 0; if (card && level == SUSPEND_DISABLE) - ret = pxa2xx_ac97_do_suspend(card, SNDRV_CTL_POWER_D3cold); + ret = pxa2xx_ac97_do_suspend(card, PMSG_SUSPEND); return ret; } @@ -292,7 +292,7 @@ static int pxa2xx_ac97_resume(struct device *_dev, u32 level) int ret = 0; if (card && level == RESUME_ENABLE) - ret = pxa2xx_ac97_do_resume(card, SNDRV_CTL_POWER_D0); + ret = pxa2xx_ac97_do_resume(card); return ret; } diff --git a/sound/core/memalloc.c b/sound/core/memalloc.c index 02132561c3f8..39a54a415528 100644 --- a/sound/core/memalloc.c +++ b/sound/core/memalloc.c @@ -512,7 +512,7 @@ static void free_all_reserved_pages(void) * proc file interface */ #define SND_MEM_PROC_FILE "driver/snd-page-alloc" -struct proc_dir_entry *snd_mem_proc; +static struct proc_dir_entry *snd_mem_proc; static int snd_mem_proc_read(char *page, char **start, off_t off, int count, int *eof, void *data) @@ -655,8 +655,7 @@ static int __init snd_mem_init(void) static void __exit snd_mem_exit(void) { - if (snd_mem_proc) - remove_proc_entry(SND_MEM_PROC_FILE, NULL); + remove_proc_entry(SND_MEM_PROC_FILE, NULL); free_all_reserved_pages(); if (snd_allocated_pages > 0) printk(KERN_ERR "snd-malloc: Memory leak? pages not freed = %li\n", snd_allocated_pages); diff --git a/sound/core/memory.c b/sound/core/memory.c index f6895577bf86..1622893d00a2 100644 --- a/sound/core/memory.c +++ b/sound/core/memory.c @@ -56,7 +56,7 @@ static DEFINE_SPINLOCK(snd_alloc_vmalloc_lock); #define VMALLOC_MAGIC 0x87654320 static snd_info_entry_t *snd_memory_info_entry; -void snd_memory_init(void) +void __init snd_memory_init(void) { snd_alloc_kmalloc = 0; snd_alloc_vmalloc = 0; diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c index de7444c586f9..a13bd7bb4c9f 100644 --- a/sound/core/oss/pcm_oss.c +++ b/sound/core/oss/pcm_oss.c @@ -1705,13 +1705,12 @@ static int snd_pcm_oss_release_file(snd_pcm_oss_file_t *pcm_oss_file) if (snd_pcm_running(substream)) snd_pcm_stop(substream, SNDRV_PCM_STATE_SETUP); snd_pcm_stream_unlock_irq(substream); - if (substream->open_flag) { + if (substream->ffile != NULL) { if (substream->ops->hw_free != NULL) substream->ops->hw_free(substream); substream->ops->close(substream); - substream->open_flag = 0; + substream->ffile = NULL; } - substream->ffile = NULL; snd_pcm_oss_release_substream(substream); snd_pcm_release_substream(substream); } @@ -1778,14 +1777,13 @@ static int snd_pcm_oss_open_file(struct file *file, snd_pcm_oss_release_file(pcm_oss_file); return err; } - psubstream->open_flag = 1; + psubstream->ffile = file; err = snd_pcm_hw_constraints_complete(psubstream); if (err < 0) { snd_printd("snd_pcm_hw_constraint_complete failed\n"); snd_pcm_oss_release_file(pcm_oss_file); return err; } - psubstream->ffile = file; snd_pcm_oss_init_substream(psubstream, psetup, minor); } if (csubstream != NULL) { @@ -1800,14 +1798,13 @@ static int snd_pcm_oss_open_file(struct file *file, snd_pcm_oss_release_file(pcm_oss_file); return err; } - csubstream->open_flag = 1; + csubstream->ffile = file; err = snd_pcm_hw_constraints_complete(csubstream); if (err < 0) { snd_printd("snd_pcm_hw_constraint_complete failed\n"); snd_pcm_oss_release_file(pcm_oss_file); return err; } - csubstream->ffile = file; snd_pcm_oss_init_substream(csubstream, csetup, minor); } diff --git a/sound/core/pcm_compat.c b/sound/core/pcm_compat.c index 3920bf0eebbf..4b6307df846d 100644 --- a/sound/core/pcm_compat.c +++ b/sound/core/pcm_compat.c @@ -103,10 +103,24 @@ struct sndrv_pcm_sw_params32 { unsigned char reserved[64]; }; +/* recalcuate the boundary within 32bit */ +static snd_pcm_uframes_t recalculate_boundary(snd_pcm_runtime_t *runtime) +{ + snd_pcm_uframes_t boundary; + + if (! runtime->buffer_size) + return 0; + boundary = runtime->buffer_size; + while (boundary * 2 <= 0x7fffffffUL - runtime->buffer_size) + boundary *= 2; + return boundary; +} + static int snd_pcm_ioctl_sw_params_compat(snd_pcm_substream_t *substream, struct sndrv_pcm_sw_params32 __user *src) { snd_pcm_sw_params_t params; + snd_pcm_uframes_t boundary; int err; memset(¶ms, 0, sizeof(params)); @@ -120,10 +134,17 @@ static int snd_pcm_ioctl_sw_params_compat(snd_pcm_substream_t *substream, get_user(params.silence_threshold, &src->silence_threshold) || get_user(params.silence_size, &src->silence_size)) return -EFAULT; + /* + * Check silent_size parameter. Since we have 64bit boundary, + * silence_size must be compared with the 32bit boundary. + */ + boundary = recalculate_boundary(substream->runtime); + if (boundary && params.silence_size >= boundary) + params.silence_size = substream->runtime->boundary; err = snd_pcm_sw_params(substream, ¶ms); if (err < 0) return err; - if (put_user(params.boundary, &src->boundary)) + if (boundary && put_user(boundary, &src->boundary)) return -EFAULT; return err; } @@ -199,16 +220,6 @@ static int snd_pcm_status_user_compat(snd_pcm_substream_t *substream, return err; } -/* recalcuate the boundary within 32bit */ -static void recalculate_boundary(snd_pcm_runtime_t *runtime) -{ - if (! runtime->buffer_size) - return; - runtime->boundary = runtime->buffer_size; - while (runtime->boundary * 2 <= 0x7fffffffUL - runtime->buffer_size) - runtime->boundary *= 2; -} - /* both for HW_PARAMS and HW_REFINE */ static int snd_pcm_ioctl_hw_params_compat(snd_pcm_substream_t *substream, int refine, @@ -241,8 +252,11 @@ static int snd_pcm_ioctl_hw_params_compat(snd_pcm_substream_t *substream, goto error; } - if (! refine) - recalculate_boundary(runtime); + if (! refine) { + unsigned int new_boundary = recalculate_boundary(runtime); + if (new_boundary) + runtime->boundary = new_boundary; + } error: kfree(data); return err; @@ -380,6 +394,7 @@ static int snd_pcm_ioctl_sync_ptr_compat(snd_pcm_substream_t *substream, u32 sflags; struct sndrv_pcm_mmap_control scontrol; struct sndrv_pcm_mmap_status sstatus; + snd_pcm_uframes_t boundary; int err; snd_assert(runtime, return -EINVAL); @@ -395,17 +410,21 @@ static int snd_pcm_ioctl_sync_ptr_compat(snd_pcm_substream_t *substream, } status = runtime->status; control = runtime->control; + boundary = recalculate_boundary(runtime); + if (! boundary) + boundary = 0x7fffffff; snd_pcm_stream_lock_irq(substream); + /* FIXME: we should consider the boundary for the sync from app */ if (!(sflags & SNDRV_PCM_SYNC_PTR_APPL)) control->appl_ptr = scontrol.appl_ptr; else - scontrol.appl_ptr = control->appl_ptr; + scontrol.appl_ptr = control->appl_ptr % boundary; if (!(sflags & SNDRV_PCM_SYNC_PTR_AVAIL_MIN)) control->avail_min = scontrol.avail_min; else scontrol.avail_min = control->avail_min; sstatus.state = status->state; - sstatus.hw_ptr = status->hw_ptr; + sstatus.hw_ptr = status->hw_ptr % boundary; sstatus.tstamp = status->tstamp; sstatus.suspended_state = status->suspended_state; snd_pcm_stream_unlock_irq(substream); diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c index c5bfd0918cff..0082914a7e33 100644 --- a/sound/core/pcm_lib.c +++ b/sound/core/pcm_lib.c @@ -1584,8 +1584,8 @@ int snd_pcm_hw_param_set(snd_pcm_t *pcm, snd_pcm_hw_params_t *params, return snd_pcm_hw_param_value(params, var, NULL); } -int _snd_pcm_hw_param_mask(snd_pcm_hw_params_t *params, - snd_pcm_hw_param_t var, const snd_mask_t *val) +static int _snd_pcm_hw_param_mask(snd_pcm_hw_params_t *params, + snd_pcm_hw_param_t var, const snd_mask_t *val) { int changed; assert(hw_is_mask(var)); @@ -2063,7 +2063,7 @@ static snd_pcm_sframes_t snd_pcm_lib_write1(snd_pcm_substream_t *substream, if (((avail < runtime->control->avail_min && size > avail) || (size >= runtime->xfer_align && avail < runtime->xfer_align))) { wait_queue_t wait; - enum { READY, SIGNALED, ERROR, SUSPENDED, EXPIRED } state; + enum { READY, SIGNALED, ERROR, SUSPENDED, EXPIRED, DROPPED } state; long tout; if (nonblock) { @@ -2097,6 +2097,9 @@ static snd_pcm_sframes_t snd_pcm_lib_write1(snd_pcm_substream_t *substream, case SNDRV_PCM_STATE_SUSPENDED: state = SUSPENDED; goto _end_loop; + case SNDRV_PCM_STATE_SETUP: + state = DROPPED; + goto _end_loop; default: break; } @@ -2123,6 +2126,9 @@ static snd_pcm_sframes_t snd_pcm_lib_write1(snd_pcm_substream_t *substream, snd_printd("playback write error (DMA or IRQ trouble?)\n"); err = -EIO; goto _end_unlock; + case DROPPED: + err = -EBADFD; + goto _end_unlock; default: break; } @@ -2359,7 +2365,7 @@ static snd_pcm_sframes_t snd_pcm_lib_read1(snd_pcm_substream_t *substream, } else if ((avail < runtime->control->avail_min && size > avail) || (size >= runtime->xfer_align && avail < runtime->xfer_align)) { wait_queue_t wait; - enum { READY, SIGNALED, ERROR, SUSPENDED, EXPIRED } state; + enum { READY, SIGNALED, ERROR, SUSPENDED, EXPIRED, DROPPED } state; long tout; if (nonblock) { @@ -2394,6 +2400,9 @@ static snd_pcm_sframes_t snd_pcm_lib_read1(snd_pcm_substream_t *substream, goto _end_loop; case SNDRV_PCM_STATE_DRAINING: goto __draining; + case SNDRV_PCM_STATE_SETUP: + state = DROPPED; + goto _end_loop; default: break; } @@ -2420,6 +2429,9 @@ static snd_pcm_sframes_t snd_pcm_lib_read1(snd_pcm_substream_t *substream, snd_printd("capture read error (DMA or IRQ trouble?)\n"); err = -EIO; goto _end_unlock; + case DROPPED: + err = -EBADFD; + goto _end_unlock; default: break; } diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index 10c2c9832649..03c17159dd8e 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -1025,7 +1025,7 @@ static void snd_pcm_post_suspend(snd_pcm_substream_t *substream, int state) snd_pcm_runtime_t *runtime = substream->runtime; snd_pcm_trigger_tstamp(substream); if (substream->timer) - snd_timer_notify(substream->timer, SNDRV_TIMER_EVENT_MPAUSE, &runtime->trigger_tstamp); + snd_timer_notify(substream->timer, SNDRV_TIMER_EVENT_MSUSPEND, &runtime->trigger_tstamp); runtime->status->suspended_state = runtime->status->state; runtime->status->state = SNDRV_PCM_STATE_SUSPENDED; snd_pcm_tick_set(substream, 0); @@ -1115,7 +1115,7 @@ static void snd_pcm_post_resume(snd_pcm_substream_t *substream, int state) snd_pcm_runtime_t *runtime = substream->runtime; snd_pcm_trigger_tstamp(substream); if (substream->timer) - snd_timer_notify(substream->timer, SNDRV_TIMER_EVENT_MCONTINUE, &runtime->trigger_tstamp); + snd_timer_notify(substream->timer, SNDRV_TIMER_EVENT_MRESUME, &runtime->trigger_tstamp); runtime->status->state = runtime->status->suspended_state; if (runtime->sleep_min) snd_pcm_tick_prepare(substream); @@ -1967,13 +1967,12 @@ static int snd_pcm_release_file(snd_pcm_file_t * pcm_file) runtime = substream->runtime; str = substream->pstr; snd_pcm_unlink(substream); - if (substream->open_flag) { + if (substream->ffile != NULL) { if (substream->ops->hw_free != NULL) substream->ops->hw_free(substream); substream->ops->close(substream); - substream->open_flag = 0; + substream->ffile = NULL; } - substream->ffile = NULL; snd_pcm_remove_file(str, pcm_file); snd_pcm_release_substream(substream); kfree(pcm_file); @@ -2022,18 +2021,15 @@ static int snd_pcm_open_file(struct file *file, snd_pcm_release_file(pcm_file); return err; } - substream->open_flag = 1; + substream->ffile = file; err = snd_pcm_hw_constraints_complete(substream); if (err < 0) { snd_printd("snd_pcm_hw_constraints_complete failed\n"); - substream->ops->close(substream); snd_pcm_release_file(pcm_file); return err; } - substream->ffile = file; - file->private_data = pcm_file; *rpcm_file = pcm_file; return 0; diff --git a/sound/core/sound_oss.c b/sound/core/sound_oss.c index de39d212bc15..e401c6703297 100644 --- a/sound/core/sound_oss.c +++ b/sound/core/sound_oss.c @@ -98,6 +98,7 @@ int snd_register_oss_device(int type, snd_card_t * card, int dev, snd_minor_t * int cidx = SNDRV_MINOR_OSS_CARD(minor); int track2 = -1; int register1 = -1, register2 = -1; + struct device *carddev = NULL; if (minor < 0) return minor; @@ -121,11 +122,13 @@ int snd_register_oss_device(int type, snd_card_t * card, int dev, snd_minor_t * track2 = SNDRV_MINOR_OSS(cidx, SNDRV_MINOR_OSS_DMMIDI1); break; } - register1 = register_sound_special(reg->f_ops, minor); + if (card) + carddev = card->dev; + register1 = register_sound_special_device(reg->f_ops, minor, carddev); if (register1 != minor) goto __end; if (track2 >= 0) { - register2 = register_sound_special(reg->f_ops, track2); + register2 = register_sound_special_device(reg->f_ops, track2, carddev); if (register2 != track2) goto __end; } diff --git a/sound/core/timer.c b/sound/core/timer.c index cfaccd415b3b..4104f6e292e9 100644 --- a/sound/core/timer.c +++ b/sound/core/timer.c @@ -799,13 +799,13 @@ static int snd_timer_free(snd_timer_t *timer) return 0; } -int snd_timer_dev_free(snd_device_t *device) +static int snd_timer_dev_free(snd_device_t *device) { snd_timer_t *timer = device->device_data; return snd_timer_free(timer); } -int snd_timer_dev_register(snd_device_t *dev) +static int snd_timer_dev_register(snd_device_t *dev) { snd_timer_t *timer = dev->device_data; snd_timer_t *timer1; @@ -880,9 +880,11 @@ void snd_timer_notify(snd_timer_t *timer, enum sndrv_timer_event event, struct t struct list_head *p, *n; snd_runtime_check(timer->hw.flags & SNDRV_TIMER_HW_SLAVE, return); - snd_assert(event >= SNDRV_TIMER_EVENT_MSTART && event <= SNDRV_TIMER_EVENT_MPAUSE, return); + snd_assert(event >= SNDRV_TIMER_EVENT_MSTART && event <= SNDRV_TIMER_EVENT_MRESUME, return); spin_lock_irqsave(&timer->lock, flags); - if (event == SNDRV_TIMER_EVENT_MSTART || event == SNDRV_TIMER_EVENT_MCONTINUE) { + if (event == SNDRV_TIMER_EVENT_MSTART || + event == SNDRV_TIMER_EVENT_MCONTINUE || + event == SNDRV_TIMER_EVENT_MRESUME) { if (timer->hw.c_resolution) resolution = timer->hw.c_resolution(timer); else @@ -1555,10 +1557,14 @@ static int snd_timer_user_params(struct file *file, snd_timer_params_t __user *_ (1<<SNDRV_TIMER_EVENT_STOP)| (1<<SNDRV_TIMER_EVENT_CONTINUE)| (1<<SNDRV_TIMER_EVENT_PAUSE)| + (1<<SNDRV_TIMER_EVENT_SUSPEND)| + (1<<SNDRV_TIMER_EVENT_RESUME)| (1<<SNDRV_TIMER_EVENT_MSTART)| (1<<SNDRV_TIMER_EVENT_MSTOP)| (1<<SNDRV_TIMER_EVENT_MCONTINUE)| - (1<<SNDRV_TIMER_EVENT_MPAUSE))) { + (1<<SNDRV_TIMER_EVENT_MPAUSE)| + (1<<SNDRV_TIMER_EVENT_MSUSPEND)| + (1<<SNDRV_TIMER_EVENT_MRESUME))) { err = -EINVAL; goto _end; } diff --git a/sound/drivers/vx/vx_mixer.c b/sound/drivers/vx/vx_mixer.c index f00c88886460..19fc68c23378 100644 --- a/sound/drivers/vx/vx_mixer.c +++ b/sound/drivers/vx/vx_mixer.c @@ -796,14 +796,14 @@ static int vx_iec958_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontro static snd_kcontrol_new_t vx_control_iec958_mask = { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,MASK), .info = vx_iec958_info, /* shared */ .get = vx_iec958_mask_get, }; static snd_kcontrol_new_t vx_control_iec958 = { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT), .info = vx_iec958_info, .get = vx_iec958_get, diff --git a/sound/drivers/vx/vx_pcm.c b/sound/drivers/vx/vx_pcm.c index af381b15fe5c..d4becf44e247 100644 --- a/sound/drivers/vx/vx_pcm.c +++ b/sound/drivers/vx/vx_pcm.c @@ -549,8 +549,8 @@ static int vx_stop_stream(vx_core_t *chip, vx_pipe_t *pipe) static snd_pcm_hardware_t vx_pcm_playback_hw = { .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_RESUME), + SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_MMAP_VALID /*|*/ + /*SNDRV_PCM_INFO_RESUME*/), .formats = /*SNDRV_PCM_FMTBIT_U8 |*/ SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_3LE, .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000, .rate_min = 5000, @@ -949,8 +949,8 @@ static snd_pcm_ops_t vx_pcm_playback_ops = { static snd_pcm_hardware_t vx_pcm_capture_hw = { .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_RESUME), + SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_MMAP_VALID /*|*/ + /*SNDRV_PCM_INFO_RESUME*/), .formats = /*SNDRV_PCM_FMTBIT_U8 |*/ SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_3LE, .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000, .rate_min = 5000, diff --git a/sound/isa/ad1816a/ad1816a.c b/sound/isa/ad1816a/ad1816a.c index 563296d02894..0eb442ca23d6 100644 --- a/sound/isa/ad1816a/ad1816a.c +++ b/sound/isa/ad1816a/ad1816a.c @@ -53,6 +53,7 @@ static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; /* Pnp setup */ static int mpu_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; /* Pnp setup */ static int dma1[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; /* PnP setup */ static int dma2[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; /* PnP setup */ +static int clockfreq[SNDRV_CARDS]; module_param_array(index, int, NULL, 0444); MODULE_PARM_DESC(index, "Index value for ad1816a based soundcard."); @@ -74,6 +75,8 @@ module_param_array(dma1, int, NULL, 0444); MODULE_PARM_DESC(dma1, "1st DMA # for ad1816a driver."); module_param_array(dma2, int, NULL, 0444); MODULE_PARM_DESC(dma2, "2nd DMA # for ad1816a driver."); +module_param_array(clockfreq, int, NULL, 0444); +MODULE_PARM_DESC(clockfreq, "Clock frequency for ad1816a driver (default = 0)."); struct snd_card_ad1816a { struct pnp_dev *dev; @@ -209,6 +212,8 @@ static int __devinit snd_card_ad1816a_probe(int dev, struct pnp_card_link *pcard snd_card_free(card); return error; } + if (clockfreq[dev] >= 5000 && clockfreq[dev] <= 100000) + chip->clock_freq = clockfreq[dev]; strcpy(card->driver, "AD1816A"); strcpy(card->shortname, "ADI SoundPort AD1816A"); diff --git a/sound/isa/ad1816a/ad1816a_lib.c b/sound/isa/ad1816a/ad1816a_lib.c index 625b2eff14a1..ae860360ecf9 100644 --- a/sound/isa/ad1816a/ad1816a_lib.c +++ b/sound/isa/ad1816a/ad1816a_lib.c @@ -234,7 +234,7 @@ static int snd_ad1816a_playback_prepare(snd_pcm_substream_t *substream) ad1816a_t *chip = snd_pcm_substream_chip(substream); unsigned long flags; snd_pcm_runtime_t *runtime = substream->runtime; - unsigned int size; + unsigned int size, rate; spin_lock_irqsave(&chip->lock, flags); @@ -245,7 +245,10 @@ static int snd_ad1816a_playback_prepare(snd_pcm_substream_t *substream) snd_dma_program(chip->dma1, runtime->dma_addr, size, DMA_MODE_WRITE | DMA_AUTOINIT); - snd_ad1816a_write(chip, AD1816A_PLAYBACK_SAMPLE_RATE, runtime->rate); + rate = runtime->rate; + if (chip->clock_freq) + rate = (rate * 33000) / chip->clock_freq; + snd_ad1816a_write(chip, AD1816A_PLAYBACK_SAMPLE_RATE, rate); snd_ad1816a_out_mask(chip, AD1816A_PLAYBACK_CONFIG, AD1816A_FMT_ALL | AD1816A_FMT_STEREO, snd_ad1816a_get_format(chip, runtime->format, @@ -263,7 +266,7 @@ static int snd_ad1816a_capture_prepare(snd_pcm_substream_t *substream) ad1816a_t *chip = snd_pcm_substream_chip(substream); unsigned long flags; snd_pcm_runtime_t *runtime = substream->runtime; - unsigned int size; + unsigned int size, rate; spin_lock_irqsave(&chip->lock, flags); @@ -274,7 +277,10 @@ static int snd_ad1816a_capture_prepare(snd_pcm_substream_t *substream) snd_dma_program(chip->dma2, runtime->dma_addr, size, DMA_MODE_READ | DMA_AUTOINIT); - snd_ad1816a_write(chip, AD1816A_CAPTURE_SAMPLE_RATE, runtime->rate); + rate = runtime->rate; + if (chip->clock_freq) + rate = (rate * 33000) / chip->clock_freq; + snd_ad1816a_write(chip, AD1816A_CAPTURE_SAMPLE_RATE, rate); snd_ad1816a_out_mask(chip, AD1816A_CAPTURE_CONFIG, AD1816A_FMT_ALL | AD1816A_FMT_STEREO, snd_ad1816a_get_format(chip, runtime->format, diff --git a/sound/isa/ad1848/ad1848_lib.c b/sound/isa/ad1848/ad1848_lib.c index 8fb3db103e48..bc642dc94547 100644 --- a/sound/isa/ad1848/ad1848_lib.c +++ b/sound/isa/ad1848/ad1848_lib.c @@ -1196,6 +1196,7 @@ int snd_ad1848_add_ctl(ad1848_t *chip, const char *name, int index, int type, un .put = snd_ad1848_put_double, }, [AD1848_MIX_CAPTURE] = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .info = snd_ad1848_info_mux, .get = snd_ad1848_get_mux, .put = snd_ad1848_put_mux, diff --git a/sound/isa/cmi8330.c b/sound/isa/cmi8330.c index 46776cc0c157..1fce8b9f37cf 100644 --- a/sound/isa/cmi8330.c +++ b/sound/isa/cmi8330.c @@ -194,8 +194,8 @@ AD1848_DOUBLE("Wavetable Capture Volume", 0, CMI8330_WAVGAIN, CMI8330_WAVGAIN, 4 AD1848_SINGLE("3D Control - Switch", 0, CMI8330_RMUX3D, 5, 1, 1), AD1848_SINGLE("PC Speaker Playback Volume", 0, CMI8330_OUTPUTVOL, 3, 3, 0), AD1848_SINGLE("FM Playback Switch", 0, CMI8330_RECMUX, 3, 1, 1), -AD1848_SINGLE("IEC958 Input Capture Switch", 0, CMI8330_RMUX3D, 7, 1, 1), -AD1848_SINGLE("IEC958 Input Playback Switch", 0, CMI8330_MUTEMUX, 7, 1, 1), +AD1848_SINGLE(SNDRV_CTL_NAME_IEC958("Input ",CAPTURE,SWITCH), 0, CMI8330_RMUX3D, 7, 1, 1), +AD1848_SINGLE(SNDRV_CTL_NAME_IEC958("Input ",PLAYBACK,SWITCH), 0, CMI8330_MUTEMUX, 7, 1, 1), }; #ifdef ENABLE_SB_MIXER diff --git a/sound/isa/cs423x/cs4231_lib.c b/sound/isa/cs423x/cs4231_lib.c index 3e7a2a33a5ca..3199941edd9b 100644 --- a/sound/isa/cs423x/cs4231_lib.c +++ b/sound/isa/cs423x/cs4231_lib.c @@ -1346,6 +1346,8 @@ static void snd_cs4231_suspend(cs4231_t *chip) int reg; unsigned long flags; + if (chip->pcm) + snd_pcm_suspend_all(chip->pcm); spin_lock_irqsave(&chip->reg_lock, flags); for (reg = 0; reg < 32; reg++) chip->image[reg] = snd_cs4231_in(chip, reg); diff --git a/sound/isa/gus/gus_io.c b/sound/isa/gus/gus_io.c index 337b0e2a8a36..23e1b5f19e1a 100644 --- a/sound/isa/gus/gus_io.c +++ b/sound/isa/gus/gus_io.c @@ -269,8 +269,9 @@ void snd_gf1_i_write_addr(snd_gus_card_t * gus, unsigned char reg, #endif /* 0 */ -unsigned int snd_gf1_i_read_addr(snd_gus_card_t * gus, - unsigned char reg, short w_16bit) +#ifdef CONFIG_SND_DEBUG +static unsigned int snd_gf1_i_read_addr(snd_gus_card_t * gus, + unsigned char reg, short w_16bit) { unsigned int res; unsigned long flags; @@ -280,6 +281,7 @@ unsigned int snd_gf1_i_read_addr(snd_gus_card_t * gus, spin_unlock_irqrestore(&gus->reg_lock, flags); return res; } +#endif /* diff --git a/sound/isa/opl3sa2.c b/sound/isa/opl3sa2.c index 95c7b3e53407..75bd6eca63e7 100644 --- a/sound/isa/opl3sa2.c +++ b/sound/isa/opl3sa2.c @@ -145,6 +145,14 @@ static snd_card_t *snd_opl3sa2_legacy[SNDRV_CARDS] = SNDRV_DEFAULT_PTR; #ifdef CONFIG_PNP +static struct pnp_device_id snd_opl3sa2_pnpbiosids[] = { + { .id = "YMH0021" }, + { .id = "NMX2210" }, /* Gateway Solo 2500 */ + { .id = "" } /* end */ +}; + +MODULE_DEVICE_TABLE(pnp, snd_opl3sa2_pnpbiosids); + static struct pnp_card_device_id snd_opl3sa2_pnpids[] = { /* Yamaha YMF719E-S (Genius Sound Maker 3DX) */ { .id = "YMH0020", .devs = { { "YMH0021" } } }, @@ -568,20 +576,18 @@ static int snd_opl3sa2_resume(snd_card_t *card) #ifdef CONFIG_PNP static int __init snd_opl3sa2_pnp(int dev, opl3sa2_t *chip, - struct pnp_card_link *card, - const struct pnp_card_device_id *id) + struct pnp_dev *pdev, + int isapnp) { - struct pnp_dev *pdev; - struct pnp_resource_table * cfg = kmalloc(sizeof(struct pnp_resource_table), GFP_KERNEL); + struct pnp_resource_table * cfg; int err; + if (!isapnp && pnp_device_is_isapnp(pdev)) + return -ENOENT; /* we have another procedure - card */ + + cfg = kmalloc(sizeof(struct pnp_resource_table), GFP_KERNEL); if (!cfg) return -ENOMEM; - pdev = chip->dev = pnp_request_card_device(card, id->devs[0].id, NULL); - if (chip->dev == NULL) { - kfree(cfg); - return -EBUSY; - } /* PnP initialization */ pnp_init_resource_table(cfg); if (sb_port[dev] != SNDRV_AUTO_PORT) @@ -601,7 +607,7 @@ static int __init snd_opl3sa2_pnp(int dev, opl3sa2_t *chip, if (irq[dev] != SNDRV_AUTO_IRQ) pnp_resource_change(&cfg->irq_resource[0], irq[dev], 1); err = pnp_manual_config_dev(pdev, cfg, 0); - if (err < 0) + if (err < 0 && isapnp) snd_printk(KERN_ERR "PnP manual resources are invalid, using auto config\n"); err = pnp_activate_dev(pdev); if (err < 0) { @@ -617,13 +623,31 @@ static int __init snd_opl3sa2_pnp(int dev, opl3sa2_t *chip, dma1[dev] = pnp_dma(pdev, 0); dma2[dev] = pnp_dma(pdev, 1); irq[dev] = pnp_irq(pdev, 0); - snd_printdd("PnP OPL3-SA: sb port=0x%lx, wss port=0x%lx, fm port=0x%lx, midi port=0x%lx\n", - sb_port[dev], wss_port[dev], fm_port[dev], midi_port[dev]); - snd_printdd("PnP OPL3-SA: control port=0x%lx, dma1=%i, dma2=%i, irq=%i\n", - port[dev], dma1[dev], dma2[dev], irq[dev]); + snd_printdd("%sPnP OPL3-SA: sb port=0x%lx, wss port=0x%lx, fm port=0x%lx, midi port=0x%lx\n", + pnp_device_is_pnpbios(pdev) ? "BIOS" : "ISA", sb_port[dev], wss_port[dev], fm_port[dev], midi_port[dev]); + snd_printdd("%sPnP OPL3-SA: control port=0x%lx, dma1=%i, dma2=%i, irq=%i\n", + pnp_device_is_pnpbios(pdev) ? "BIOS" : "ISA", port[dev], dma1[dev], dma2[dev], irq[dev]); kfree(cfg); + chip->dev = pdev; return 0; } + +static int __init snd_opl3sa2_cpnp(int dev, opl3sa2_t *chip, + struct pnp_card_link *card, + const struct pnp_card_device_id *id) +{ + struct pnp_dev *pdev; + struct pnp_resource_table * cfg = kmalloc(sizeof(struct pnp_resource_table), GFP_KERNEL); + + if (!cfg) + return -ENOMEM; + pdev = pnp_request_card_device(card, id->devs[0].id, NULL); + if (pdev == NULL) { + kfree(cfg); + return -EBUSY; + } + return snd_opl3sa2_pnp(dev, chip, pdev, 1); +} #endif /* CONFIG_PNP */ static int snd_opl3sa2_free(opl3sa2_t *chip) @@ -645,6 +669,7 @@ static int snd_opl3sa2_dev_free(snd_device_t *device) } static int __devinit snd_opl3sa2_probe(int dev, + struct pnp_dev *pdev, struct pnp_card_link *pcard, const struct pnp_card_device_id *pid) { @@ -695,8 +720,13 @@ static int __devinit snd_opl3sa2_probe(int dev, if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops)) < 0) goto __error; #ifdef CONFIG_PNP - if (isapnp[dev]) { - if ((err = snd_opl3sa2_pnp(dev, chip, pcard, pid)) < 0) + if (pdev) { + if ((err = snd_opl3sa2_pnp(dev, chip, pdev, 0)) < 0) + goto __error; + snd_card_set_dev(card, &pdev->dev); + } + if (pcard) { + if ((err = snd_opl3sa2_cpnp(dev, chip, pcard, pid)) < 0) goto __error; snd_card_set_dev(card, &pcard->card->dev); } @@ -768,7 +798,9 @@ static int __devinit snd_opl3sa2_probe(int dev, if ((err = snd_card_register(card)) < 0) goto __error; - if (pcard) + if (pdev) + pnp_set_drvdata(pdev, card); + else if (pcard) pnp_set_card_drvdata(pcard, card); else snd_opl3sa2_legacy[dev] = card; @@ -780,8 +812,8 @@ static int __devinit snd_opl3sa2_probe(int dev, } #ifdef CONFIG_PNP -static int __devinit snd_opl3sa2_pnp_detect(struct pnp_card_link *card, - const struct pnp_card_device_id *id) +static int __devinit snd_opl3sa2_pnp_detect(struct pnp_dev *pdev, + const struct pnp_device_id *id) { static int dev; int res; @@ -789,7 +821,7 @@ static int __devinit snd_opl3sa2_pnp_detect(struct pnp_card_link *card, for ( ; dev < SNDRV_CARDS; dev++) { if (!enable[dev] || !isapnp[dev]) continue; - res = snd_opl3sa2_probe(dev, card, id); + res = snd_opl3sa2_probe(dev, pdev, NULL, NULL); if (res < 0) return res; dev++; @@ -798,7 +830,40 @@ static int __devinit snd_opl3sa2_pnp_detect(struct pnp_card_link *card, return -ENODEV; } -static void __devexit snd_opl3sa2_pnp_remove(struct pnp_card_link * pcard) +static void __devexit snd_opl3sa2_pnp_remove(struct pnp_dev * pdev) +{ + snd_card_t *card = (snd_card_t *) pnp_get_drvdata(pdev); + + snd_card_disconnect(card); + snd_card_free_in_thread(card); +} + +static struct pnp_driver opl3sa2_pnp_driver = { + .name = "opl3sa2-pnpbios", + .id_table = snd_opl3sa2_pnpbiosids, + .probe = snd_opl3sa2_pnp_detect, + .remove = __devexit_p(snd_opl3sa2_pnp_remove), +}; + +static int __devinit snd_opl3sa2_pnp_cdetect(struct pnp_card_link *card, + const struct pnp_card_device_id *id) +{ + static int dev; + int res; + + for ( ; dev < SNDRV_CARDS; dev++) { + if (!enable[dev] || !isapnp[dev]) + continue; + res = snd_opl3sa2_probe(dev, NULL, card, id); + if (res < 0) + return res; + dev++; + return 0; + } + return -ENODEV; +} + +static void __devexit snd_opl3sa2_pnp_cremove(struct pnp_card_link * pcard) { snd_card_t *card = (snd_card_t *) pnp_get_card_drvdata(pcard); @@ -810,8 +875,8 @@ static struct pnp_card_driver opl3sa2_pnpc_driver = { .flags = PNP_DRIVER_RES_DISABLE, .name = "opl3sa2", .id_table = snd_opl3sa2_pnpids, - .probe = snd_opl3sa2_pnp_detect, - .remove = __devexit_p(snd_opl3sa2_pnp_remove), + .probe = snd_opl3sa2_pnp_cdetect, + .remove = __devexit_p(snd_opl3sa2_pnp_cremove), }; #endif /* CONFIG_PNP */ @@ -826,10 +891,11 @@ static int __init alsa_card_opl3sa2_init(void) if (isapnp[dev]) continue; #endif - if (snd_opl3sa2_probe(dev, NULL, NULL) >= 0) + if (snd_opl3sa2_probe(dev, NULL, NULL, NULL) >= 0) cards++; } #ifdef CONFIG_PNP + cards += pnp_register_driver(&opl3sa2_pnp_driver); cards += pnp_register_card_driver(&opl3sa2_pnpc_driver); #endif if (!cards) { diff --git a/sound/isa/sb/sb16_main.c b/sound/isa/sb/sb16_main.c index a6a0fa516268..a99e642a68b5 100644 --- a/sound/isa/sb/sb16_main.c +++ b/sound/isa/sb/sb16_main.c @@ -729,7 +729,7 @@ static int snd_sb16_dma_control_put(snd_kcontrol_t * kcontrol, snd_ctl_elem_valu } static snd_kcontrol_new_t snd_sb16_dma_control = { - .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = "16-bit DMA Allocation", .info = snd_sb16_dma_control_info, .get = snd_sb16_dma_control_get, diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig index 26b42bb20a0a..1e458919cce6 100644 --- a/sound/pci/Kconfig +++ b/sound/pci/Kconfig @@ -1,11 +1,15 @@ # ALSA PCI drivers -menu "PCI devices" - depends on SND!=n && PCI - config SND_AC97_CODEC tristate select SND_PCM + select SND_AC97_BUS + +config SND_AC97_BUS + tristate + +menu "PCI devices" + depends on SND!=n && PCI config SND_ALI5451 tristate "ALi M5451 PCI Audio Controller" diff --git a/sound/pci/ac97/Makefile b/sound/pci/ac97/Makefile index 3c3222122d8b..77b3482cb133 100644 --- a/sound/pci/ac97/Makefile +++ b/sound/pci/ac97/Makefile @@ -10,9 +10,11 @@ snd-ac97-codec-objs += ac97_proc.o endif snd-ak4531-codec-objs := ak4531_codec.o +snd-ac97-bus-objs := ac97_bus.o # Toplevel Module Dependency obj-$(CONFIG_SND_AC97_CODEC) += snd-ac97-codec.o obj-$(CONFIG_SND_ENS1370) += snd-ak4531-codec.o +obj-$(CONFIG_SND_AC97_BUS) += snd-ac97-bus.o obj-m := $(sort $(obj-m)) diff --git a/sound/pci/ac97/ac97_bus.c b/sound/pci/ac97/ac97_bus.c new file mode 100644 index 000000000000..227f8b9f67ce --- /dev/null +++ b/sound/pci/ac97/ac97_bus.c @@ -0,0 +1,79 @@ +/* + * Linux driver model AC97 bus interface + * + * Author: Nicolas Pitre + * Created: Jan 14, 2005 + * Copyright: (C) MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/string.h> + +/* + * Codec families have names seperated by commas, so we search for an + * individual codec name within the family string. + */ +static int ac97_bus_match(struct device *dev, struct device_driver *drv) +{ + return (strstr(dev->bus_id, drv->name) != NULL); +} + +static int ac97_bus_suspend(struct device *dev, pm_message_t state) +{ + int ret = 0; + + if (dev->driver && dev->driver->suspend) { + ret = dev->driver->suspend(dev, state, SUSPEND_DISABLE); + if (ret == 0) + ret = dev->driver->suspend(dev, state, SUSPEND_SAVE_STATE); + if (ret == 0) + ret = dev->driver->suspend(dev, state, SUSPEND_POWER_DOWN); + } + return ret; +} + +static int ac97_bus_resume(struct device *dev) +{ + int ret = 0; + + if (dev->driver && dev->driver->resume) { + ret = dev->driver->resume(dev, RESUME_POWER_ON); + if (ret == 0) + ret = dev->driver->resume(dev, RESUME_RESTORE_STATE); + if (ret == 0) + ret = dev->driver->resume(dev, RESUME_ENABLE); + } + return ret; +} + +struct bus_type ac97_bus_type = { + .name = "ac97", + .match = ac97_bus_match, + .suspend = ac97_bus_suspend, + .resume = ac97_bus_resume, +}; + +static int __init ac97_bus_init(void) +{ + return bus_register(&ac97_bus_type); +} + +subsys_initcall(ac97_bus_init); + +static void __exit ac97_bus_exit(void) +{ + bus_unregister(&ac97_bus_type); +} + +module_exit(ac97_bus_exit); + +EXPORT_SYMBOL(ac97_bus_type); + +MODULE_LICENSE("GPL"); diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c index 6983eea226da..5501f4440c92 100644 --- a/sound/pci/ac97/ac97_codec.c +++ b/sound/pci/ac97/ac97_codec.c @@ -157,6 +157,7 @@ static const ac97_codec_id_t snd_ac97_codec_ids[] = { { 0x54524123, 0xffffffff, "TR28602", NULL, NULL }, // only guess --jk [TR28023 = eMicro EM28023 (new CT1297)] { 0x54584e20, 0xffffffff, "TLC320AD9xC", NULL, NULL }, { 0x56494161, 0xffffffff, "VIA1612A", NULL, NULL }, // modified ICE1232 with S/PDIF +{ 0x56494170, 0xffffffff, "VIA1617A", patch_vt1617a, NULL }, // modified VT1616 with S/PDIF { 0x57454301, 0xffffffff, "W83971D", NULL, NULL }, { 0x574d4c00, 0xffffffff, "WM9701A", NULL, NULL }, { 0x574d4C03, 0xffffffff, "WM9703,WM9707,WM9708,WM9717", patch_wolfson03, NULL}, @@ -1307,16 +1308,18 @@ static int snd_ac97_mixer_build(ac97_t * ac97) } /* build master tone controls */ - if (snd_ac97_try_volume_mix(ac97, AC97_MASTER_TONE)) { - for (idx = 0; idx < 2; idx++) { - if ((err = snd_ctl_add(card, kctl = snd_ac97_cnew(&snd_ac97_controls_tone[idx], ac97))) < 0) - return err; - if (ac97->id == AC97_ID_YMF753) { - kctl->private_value &= ~(0xff << 16); - kctl->private_value |= 7 << 16; + if (!(ac97->flags & AC97_HAS_NO_TONE)) { + if (snd_ac97_try_volume_mix(ac97, AC97_MASTER_TONE)) { + for (idx = 0; idx < 2; idx++) { + if ((err = snd_ctl_add(card, kctl = snd_ac97_cnew(&snd_ac97_controls_tone[idx], ac97))) < 0) + return err; + if (ac97->id == AC97_ID_YMF753) { + kctl->private_value &= ~(0xff << 16); + kctl->private_value |= 7 << 16; + } } + snd_ac97_write_cache(ac97, AC97_MASTER_TONE, 0x0f0f); } - snd_ac97_write_cache(ac97, AC97_MASTER_TONE, 0x0f0f); } /* build PC Speaker controls */ @@ -1339,11 +1342,13 @@ static int snd_ac97_mixer_build(ac97_t * ac97) } /* build MIC controls */ - if (snd_ac97_try_volume_mix(ac97, AC97_MIC)) { - if ((err = snd_ac97_cmix_new(card, "Mic Playback", AC97_MIC, ac97)) < 0) - return err; - if ((err = snd_ctl_add(card, snd_ac97_cnew(&snd_ac97_controls_mic_boost, ac97))) < 0) - return err; + if (!(ac97->flags & AC97_HAS_NO_MIC)) { + if (snd_ac97_try_volume_mix(ac97, AC97_MIC)) { + if ((err = snd_ac97_cmix_new(card, "Mic Playback", AC97_MIC, ac97)) < 0) + return err; + if ((err = snd_ctl_add(card, snd_ac97_cnew(&snd_ac97_controls_mic_boost, ac97))) < 0) + return err; + } } /* build Line controls */ @@ -1402,12 +1407,14 @@ static int snd_ac97_mixer_build(ac97_t * ac97) } snd_ac97_write_cache(ac97, AC97_PCM, init_val); } else { - if (ac97->flags & AC97_HAS_NO_PCM_VOL) - err = snd_ac97_cmute_new(card, "PCM Playback Switch", AC97_PCM, ac97); - else - err = snd_ac97_cmix_new(card, "PCM Playback", AC97_PCM, ac97); - if (err < 0) - return err; + if (!(ac97->flags & AC97_HAS_NO_STD_PCM)) { + if (ac97->flags & AC97_HAS_NO_PCM_VOL) + err = snd_ac97_cmute_new(card, "PCM Playback Switch", AC97_PCM, ac97); + else + err = snd_ac97_cmix_new(card, "PCM Playback", AC97_PCM, ac97); + if (err < 0) + return err; + } } /* build Capture controls */ @@ -1807,6 +1814,39 @@ int snd_ac97_bus(snd_card_t *card, int num, ac97_bus_ops_t *ops, return 0; } +/* stop no dev release warning */ +static void ac97_device_release(struct device * dev) +{ +} + +/* register ac97 codec to bus */ +static int snd_ac97_dev_register(snd_device_t *device) +{ + ac97_t *ac97 = device->device_data; + int err; + + ac97->dev.bus = &ac97_bus_type; + ac97->dev.parent = ac97->bus->card->dev; + ac97->dev.platform_data = ac97; + ac97->dev.release = ac97_device_release; + snprintf(ac97->dev.bus_id, BUS_ID_SIZE, "card%d-%d", ac97->bus->card->number, ac97->num); + if ((err = device_register(&ac97->dev)) < 0) { + snd_printk(KERN_ERR "Can't register ac97 bus\n"); + ac97->dev.bus = NULL; + return err; + } + return 0; +} + +/* unregister ac97 codec */ +static int snd_ac97_dev_unregister(snd_device_t *device) +{ + ac97_t *ac97 = device->device_data; + if (ac97->dev.bus) + device_unregister(&ac97->dev); + return snd_ac97_free(ac97); +} + /* build_ops to do nothing */ static struct snd_ac97_build_ops null_build_ops; @@ -1840,6 +1880,8 @@ int snd_ac97_mixer(ac97_bus_t *bus, ac97_template_t *template, ac97_t **rac97) const ac97_codec_id_t *pid; static snd_device_ops_t ops = { .dev_free = snd_ac97_dev_free, + .dev_register = snd_ac97_dev_register, + .dev_unregister = snd_ac97_dev_unregister, }; snd_assert(rac97 != NULL, return -EINVAL); @@ -2539,8 +2581,6 @@ int snd_ac97_tune_hardware(ac97_t *ac97, struct ac97_quirk *quirk, const char *o { int result; - snd_assert(quirk, return -EINVAL); - /* quirk overriden? */ if (override && strcmp(override, "-1") && strcmp(override, "default")) { result = apply_quirk_str(ac97, override); @@ -2549,6 +2589,9 @@ int snd_ac97_tune_hardware(ac97_t *ac97, struct ac97_quirk *quirk, const char *o return result; } + if (! quirk) + return -EINVAL; + for (; quirk->subvendor; quirk++) { if (quirk->subvendor != ac97->subsystem_vendor) continue; diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c index 66edc857d3e6..b584172c1104 100644 --- a/sound/pci/ac97/ac97_patch.c +++ b/sound/pci/ac97/ac97_patch.c @@ -370,141 +370,387 @@ int patch_yamaha_ymf753(ac97_t * ac97) * added support for WM9705,WM9708,WM9709,WM9710,WM9711,WM9712 and WM9717. */ -int patch_wolfson03(ac97_t * ac97) +static const snd_kcontrol_new_t wm97xx_snd_ac97_controls[] = { +AC97_DOUBLE("Front Playback Volume", AC97_WM97XX_FMIXER_VOL, 8, 0, 31, 1), +AC97_SINGLE("Front Playback Switch", AC97_WM97XX_FMIXER_VOL, 15, 1, 1), +}; + +static int patch_wolfson_wm9703_specific(ac97_t * ac97) { /* This is known to work for the ViewSonic ViewPad 1000 - Randolph Bentson <bentson@holmsjoen.com> */ + * Randolph Bentson <bentson@holmsjoen.com> + * WM9703/9707/9708/9717 + */ + int err, i; + + for (i = 0; i < ARRAY_SIZE(wm97xx_snd_ac97_controls); i++) { + if ((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&wm97xx_snd_ac97_controls[i], ac97))) < 0) + return err; + } + snd_ac97_write_cache(ac97, AC97_WM97XX_FMIXER_VOL, 0x0808); + return 0; +} + +static struct snd_ac97_build_ops patch_wolfson_wm9703_ops = { + .build_specific = patch_wolfson_wm9703_specific, +}; - // WM9703/9707/9708/9717 - snd_ac97_write_cache(ac97, AC97_WM97XX_FMIXER_VOL, 0x0808); - snd_ac97_write_cache(ac97, AC97_GENERAL_PURPOSE, 0x8000); +int patch_wolfson03(ac97_t * ac97) +{ + ac97->build_ops = &patch_wolfson_wm9703_ops; return 0; } - -int patch_wolfson04(ac97_t * ac97) + +static const snd_kcontrol_new_t wm9704_snd_ac97_controls[] = { +AC97_DOUBLE("Front Playback Volume", AC97_WM97XX_FMIXER_VOL, 8, 0, 31, 1), +AC97_SINGLE("Front Playback Switch", AC97_WM97XX_FMIXER_VOL, 15, 1, 1), +AC97_DOUBLE("Rear Playback Volume", AC97_WM9704_RMIXER_VOL, 8, 0, 31, 1), +AC97_SINGLE("Rear Playback Switch", AC97_WM9704_RMIXER_VOL, 15, 1, 1), +AC97_DOUBLE("Rear DAC Volume", AC97_WM9704_RPCM_VOL, 8, 0, 31, 1), +AC97_DOUBLE("Surround Volume", AC97_SURROUND_MASTER, 8, 0, 31, 1), +}; + +static int patch_wolfson_wm9704_specific(ac97_t * ac97) { - // WM9704M/9704Q - // set front and rear mixer volume - snd_ac97_write_cache(ac97, AC97_WM97XX_FMIXER_VOL, 0x0808); - snd_ac97_write_cache(ac97, AC97_WM9704_RMIXER_VOL, 0x0808); - - // patch for DVD noise + int err, i; + for (i = 0; i < ARRAY_SIZE(wm9704_snd_ac97_controls); i++) { + if ((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&wm9704_snd_ac97_controls[i], ac97))) < 0) + return err; + } + /* patch for DVD noise */ snd_ac97_write_cache(ac97, AC97_WM9704_TEST, 0x0200); - - // init vol - snd_ac97_write_cache(ac97, AC97_WM9704_RPCM_VOL, 0x0808); - - // set rear surround volume - snd_ac97_write_cache(ac97, AC97_SURROUND_MASTER, 0x0000); return 0; } - + +static struct snd_ac97_build_ops patch_wolfson_wm9704_ops = { + .build_specific = patch_wolfson_wm9704_specific, +}; + +int patch_wolfson04(ac97_t * ac97) +{ + /* WM9704M/9704Q */ + ac97->build_ops = &patch_wolfson_wm9704_ops; + return 0; +} + +static int patch_wolfson_wm9705_specific(ac97_t * ac97) +{ + int err, i; + for (i = 0; i < ARRAY_SIZE(wm97xx_snd_ac97_controls); i++) { + if ((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&wm97xx_snd_ac97_controls[i], ac97))) < 0) + return err; + } + snd_ac97_write_cache(ac97, 0x72, 0x0808); + return 0; +} + +static struct snd_ac97_build_ops patch_wolfson_wm9705_ops = { + .build_specific = patch_wolfson_wm9705_specific, +}; + int patch_wolfson05(ac97_t * ac97) { - // WM9705, WM9710 - // set front mixer volume - snd_ac97_write_cache(ac97, AC97_WM97XX_FMIXER_VOL, 0x0808); + /* WM9705, WM9710 */ + ac97->build_ops = &patch_wolfson_wm9705_ops; + return 0; +} + +static const char* wm9711_alc_select[] = {"None", "Left", "Right", "Stereo"}; +static const char* wm9711_alc_mix[] = {"Stereo", "Right", "Left", "None"}; +static const char* wm9711_out3_src[] = {"Left", "VREF", "Left + Right", "Mono"}; +static const char* wm9711_out3_lrsrc[] = {"Master Mix", "Headphone Mix"}; +static const char* wm9711_rec_adc[] = {"Stereo", "Left", "Right", "Mute"}; +static const char* wm9711_base[] = {"Linear Control", "Adaptive Boost"}; +static const char* wm9711_rec_gain[] = {"+1.5dB Steps", "+0.75dB Steps"}; +static const char* wm9711_mic[] = {"Mic 1", "Differential", "Mic 2", "Stereo"}; +static const char* wm9711_rec_sel[] = + {"Mic 1", "NC", "NC", "Master Mix", "Line", "Headphone Mix", "Phone Mix", "Phone"}; +static const char* wm9711_ng_type[] = {"Constant Gain", "Mute"}; + +static const struct ac97_enum wm9711_enum[] = { +AC97_ENUM_SINGLE(AC97_PCI_SVID, 14, 4, wm9711_alc_select), +AC97_ENUM_SINGLE(AC97_VIDEO, 10, 4, wm9711_alc_mix), +AC97_ENUM_SINGLE(AC97_AUX, 9, 4, wm9711_out3_src), +AC97_ENUM_SINGLE(AC97_AUX, 8, 2, wm9711_out3_lrsrc), +AC97_ENUM_SINGLE(AC97_REC_SEL, 12, 4, wm9711_rec_adc), +AC97_ENUM_SINGLE(AC97_MASTER_TONE, 15, 2, wm9711_base), +AC97_ENUM_DOUBLE(AC97_REC_GAIN, 14, 6, 2, wm9711_rec_gain), +AC97_ENUM_SINGLE(AC97_MIC, 5, 4, wm9711_mic), +AC97_ENUM_DOUBLE(AC97_REC_SEL, 8, 0, 8, wm9711_rec_sel), +AC97_ENUM_SINGLE(AC97_PCI_SVID, 5, 2, wm9711_ng_type), +}; + +static const snd_kcontrol_new_t wm9711_snd_ac97_controls[] = { +AC97_SINGLE("ALC Target Volume", AC97_CODEC_CLASS_REV, 12, 15, 0), +AC97_SINGLE("ALC Hold Time", AC97_CODEC_CLASS_REV, 8, 15, 0), +AC97_SINGLE("ALC Decay Time", AC97_CODEC_CLASS_REV, 4, 15, 0), +AC97_SINGLE("ALC Attack Time", AC97_CODEC_CLASS_REV, 0, 15, 0), +AC97_ENUM("ALC Function", wm9711_enum[0]), +AC97_SINGLE("ALC Max Volume", AC97_PCI_SVID, 11, 7, 1), +AC97_SINGLE("ALC ZC Timeout", AC97_PCI_SVID, 9, 3, 1), +AC97_SINGLE("ALC ZC Switch", AC97_PCI_SVID, 8, 1, 0), +AC97_SINGLE("ALC NG Switch", AC97_PCI_SVID, 7, 1, 0), +AC97_ENUM("ALC NG Type", wm9711_enum[9]), +AC97_SINGLE("ALC NG Threshold", AC97_PCI_SVID, 0, 31, 1), + +AC97_SINGLE("Side Tone Switch", AC97_VIDEO, 15, 1, 1), +AC97_SINGLE("Side Tone Volume", AC97_VIDEO, 12, 7, 1), +AC97_ENUM("ALC Headphone Mux", wm9711_enum[1]), +AC97_SINGLE("ALC Headphone Volume", AC97_VIDEO, 7, 7, 1), + +AC97_SINGLE("Out3 Switch", AC97_AUX, 15, 1, 1), +AC97_SINGLE("Out3 ZC Switch", AC97_AUX, 7, 1, 1), +AC97_ENUM("Out3 Mux", wm9711_enum[2]), +AC97_ENUM("Out3 LR Mux", wm9711_enum[3]), +AC97_SINGLE("Out3 Volume", AC97_AUX, 0, 31, 1), + +AC97_SINGLE("Beep to Headphone Switch", AC97_PC_BEEP, 15, 1, 1), +AC97_SINGLE("Beep to Headphone Volume", AC97_PC_BEEP, 12, 7, 1), +AC97_SINGLE("Beep to Side Tone Switch", AC97_PC_BEEP, 11, 1, 1), +AC97_SINGLE("Beep to Side Tone Volume", AC97_PC_BEEP, 8, 7, 1), +AC97_SINGLE("Beep to Phone Switch", AC97_PC_BEEP, 7, 1, 1), +AC97_SINGLE("Beep to Phone Volume", AC97_PC_BEEP, 4, 7, 1), + +AC97_SINGLE("Aux to Headphone Switch", AC97_CD, 15, 1, 1), +AC97_SINGLE("Aux to Headphone Volume", AC97_CD, 12, 7, 1), +AC97_SINGLE("Aux to Side Tone Switch", AC97_CD, 11, 1, 1), +AC97_SINGLE("Aux to Side Tone Volume", AC97_CD, 8, 7, 1), +AC97_SINGLE("Aux to Phone Switch", AC97_CD, 7, 1, 1), +AC97_SINGLE("Aux to Phone Volume", AC97_CD, 4, 7, 1), + +AC97_SINGLE("Phone to Headphone Switch", AC97_PHONE, 15, 1, 1), +AC97_SINGLE("Phone to Master Switch", AC97_PHONE, 14, 1, 1), + +AC97_SINGLE("Line to Headphone Switch", AC97_LINE, 15, 1, 1), +AC97_SINGLE("Line to Master Switch", AC97_LINE, 14, 1, 1), +AC97_SINGLE("Line to Phone Switch", AC97_LINE, 13, 1, 1), + +AC97_SINGLE("PCM Playback to Headphone Switch", AC97_PCM, 15, 1, 1), +AC97_SINGLE("PCM Playback to Master Switch", AC97_PCM, 14, 1, 1), +AC97_SINGLE("PCM Playback to Phone Switch", AC97_PCM, 13, 1, 1), + +AC97_SINGLE("Capture 20dB Boost Switch", AC97_REC_SEL, 14, 1, 0), +AC97_ENUM("Capture to Phone Mux", wm9711_enum[4]), +AC97_SINGLE("Capture to Phone 20dB Boost Switch", AC97_REC_SEL, 11, 1, 1), +AC97_ENUM("Capture Select", wm9711_enum[8]), + +AC97_SINGLE("3D Upper Cut-off Switch", AC97_3D_CONTROL, 5, 1, 1), +AC97_SINGLE("3D Lower Cut-off Switch", AC97_3D_CONTROL, 4, 1, 1), + +AC97_ENUM("Bass Control", wm9711_enum[5]), +AC97_SINGLE("Bass Cut-off Switch", AC97_MASTER_TONE, 12, 1, 1), +AC97_SINGLE("Tone Cut-off Switch", AC97_MASTER_TONE, 4, 1, 1), +AC97_SINGLE("Playback Attenuate (-6dB) Switch", AC97_MASTER_TONE, 6, 1, 0), + +AC97_SINGLE("ADC Switch", AC97_REC_GAIN, 15, 1, 1), +AC97_ENUM("Capture Volume Steps", wm9711_enum[6]), +AC97_DOUBLE("Capture Volume", AC97_REC_GAIN, 8, 0, 15, 1), +AC97_SINGLE("Capture ZC Switch", AC97_REC_GAIN, 7, 1, 0), + +AC97_SINGLE("Mic 1 to Phone Switch", AC97_MIC, 14, 1, 1), +AC97_SINGLE("Mic 2 to Phone Switch", AC97_MIC, 13, 1, 1), +AC97_ENUM("Mic Select Source", wm9711_enum[7]), +AC97_SINGLE("Mic 1 Volume", AC97_MIC, 8, 32, 1), +AC97_SINGLE("Mic 20dB Boost Switch", AC97_MIC, 7, 1, 0), + +AC97_SINGLE("Master ZC Switch", AC97_MASTER, 7, 1, 0), +AC97_SINGLE("Headphone ZC Switch", AC97_HEADPHONE, 7, 1, 0), +AC97_SINGLE("Mono ZC Switch", AC97_MASTER_MONO, 7, 1, 0), +}; + +static int patch_wolfson_wm9711_specific(ac97_t * ac97) +{ + int err, i; + + for (i = 0; i < ARRAY_SIZE(wm9711_snd_ac97_controls); i++) { + if ((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&wm9711_snd_ac97_controls[i], ac97))) < 0) + return err; + } + snd_ac97_write_cache(ac97, AC97_CODEC_CLASS_REV, 0x0808); + snd_ac97_write_cache(ac97, AC97_PCI_SVID, 0x0808); + snd_ac97_write_cache(ac97, AC97_VIDEO, 0x0808); + snd_ac97_write_cache(ac97, AC97_AUX, 0x0808); + snd_ac97_write_cache(ac97, AC97_PC_BEEP, 0x0808); + snd_ac97_write_cache(ac97, AC97_CD, 0x0000); return 0; } +static struct snd_ac97_build_ops patch_wolfson_wm9711_ops = { + .build_specific = patch_wolfson_wm9711_specific, +}; + int patch_wolfson11(ac97_t * ac97) { - // WM9711, WM9712 - // set out3 volume - snd_ac97_write_cache(ac97, AC97_WM9711_OUT3VOL, 0x0808); + /* WM9711, WM9712 */ + ac97->build_ops = &patch_wolfson_wm9711_ops; + + ac97->flags |= AC97_HAS_NO_REC_GAIN | AC97_STEREO_MUTES | AC97_HAS_NO_MIC | + AC97_HAS_NO_PC_BEEP | AC97_HAS_NO_VIDEO | AC97_HAS_NO_CD; + return 0; } -static const char* wm9713_mic_mixer[] = {"Stereo", "Mic1", "Mic2", "Mute"}; +static const char* wm9713_mic_mixer[] = {"Stereo", "Mic 1", "Mic 2", "Mute"}; static const char* wm9713_rec_mux[] = {"Stereo", "Left", "Right", "Mute"}; -static const char* wm9713_rec_src_l[] = {"Mic1", "Mic2", "Line L", "Mono In", "HP Mix L", "Spk Mix", "Mono Mix", "Zh"}; -static const char* wm9713_rec_src_r[] = {"Mic1", "Mic2", "Line R", "Mono In", "HP Mix R", "Spk Mix", "Mono Mix", "Zh"}; +static const char* wm9713_rec_src[] = + {"Mic 1", "Mic 2", "Line", "Mono In", "Headphone Mix", "Master Mix", + "Mono Mix", "Zh"}; +static const char* wm9713_rec_gain[] = {"+1.5dB Steps", "+0.75dB Steps"}; +static const char* wm9713_alc_select[] = {"None", "Left", "Right", "Stereo"}; +static const char* wm9713_mono_pga[] = {"Vmid", "Zh", "Mono Mix", "Inv 1"}; +static const char* wm9713_spk_pga[] = + {"Vmid", "Zh", "Headphone Mix", "Master Mix", "Inv", "NC", "NC", "NC"}; +static const char* wm9713_hp_pga[] = {"Vmid", "Zh", "Headphone Mix", "NC"}; +static const char* wm9713_out3_pga[] = {"Vmid", "Zh", "Inv 1", "NC"}; +static const char* wm9713_out4_pga[] = {"Vmid", "Zh", "Inv 2", "NC"}; +static const char* wm9713_dac_inv[] = + {"Off", "Mono Mix", "Master Mix", "Headphone Mix L", "Headphone Mix R", + "Headphone Mix Mono", "NC", "Vmid"}; +static const char* wm9713_base[] = {"Linear Control", "Adaptive Boost"}; +static const char* wm9713_ng_type[] = {"Constant Gain", "Mute"}; static const struct ac97_enum wm9713_enum[] = { AC97_ENUM_SINGLE(AC97_LINE, 3, 4, wm9713_mic_mixer), AC97_ENUM_SINGLE(AC97_VIDEO, 14, 4, wm9713_rec_mux), AC97_ENUM_SINGLE(AC97_VIDEO, 9, 4, wm9713_rec_mux), -AC97_ENUM_SINGLE(AC97_VIDEO, 3, 8, wm9713_rec_src_l), -AC97_ENUM_SINGLE(AC97_VIDEO, 0, 8, wm9713_rec_src_r), +AC97_ENUM_DOUBLE(AC97_VIDEO, 3, 0, 8, wm9713_rec_src), +AC97_ENUM_DOUBLE(AC97_CD, 14, 6, 2, wm9713_rec_gain), +AC97_ENUM_SINGLE(AC97_PCI_SVID, 14, 4, wm9713_alc_select), +AC97_ENUM_SINGLE(AC97_REC_GAIN, 14, 4, wm9713_mono_pga), +AC97_ENUM_DOUBLE(AC97_REC_GAIN, 11, 8, 8, wm9713_spk_pga), +AC97_ENUM_DOUBLE(AC97_REC_GAIN, 6, 4, 4, wm9713_hp_pga), +AC97_ENUM_SINGLE(AC97_REC_GAIN, 2, 4, wm9713_out3_pga), +AC97_ENUM_SINGLE(AC97_REC_GAIN, 0, 4, wm9713_out4_pga), +AC97_ENUM_DOUBLE(AC97_REC_GAIN_MIC, 13, 10, 8, wm9713_dac_inv), +AC97_ENUM_SINGLE(AC97_GENERAL_PURPOSE, 15, 2, wm9713_base), +AC97_ENUM_SINGLE(AC97_PCI_SVID, 5, 2, wm9713_ng_type), }; -static const snd_kcontrol_new_t wm13_snd_ac97_controls_line_in[] = { +static const snd_kcontrol_new_t wm13_snd_ac97_controls[] = { AC97_DOUBLE("Line In Volume", AC97_PC_BEEP, 8, 0, 31, 1), -AC97_SINGLE("Line In to Headphone Mute", AC97_PC_BEEP, 15, 1, 1), -AC97_SINGLE("Line In to Speaker Mute", AC97_PC_BEEP, 14, 1, 1), -AC97_SINGLE("Line In to Mono Mute", AC97_PC_BEEP, 13, 1, 1), +AC97_SINGLE("Line In to Headphone Switch", AC97_PC_BEEP, 15, 1, 1), +AC97_SINGLE("Line In to Master Switch", AC97_PC_BEEP, 14, 1, 1), +AC97_SINGLE("Line In to Mono Switch", AC97_PC_BEEP, 13, 1, 1), + +AC97_DOUBLE("PCM Playback Volume", AC97_PHONE, 8, 0, 31, 1), +AC97_SINGLE("PCM Playback to Headphone Switch", AC97_PHONE, 15, 1, 1), +AC97_SINGLE("PCM Playback to Master Switch", AC97_PHONE, 14, 1, 1), +AC97_SINGLE("PCM Playback to Mono Switch", AC97_PHONE, 13, 1, 1), + +AC97_SINGLE("Mic 1 Volume", AC97_MIC, 8, 31, 1), +AC97_SINGLE("Mic 2 Volume", AC97_MIC, 0, 31, 1), +AC97_SINGLE("Mic 1 to Mono Switch", AC97_LINE, 7, 1, 1), +AC97_SINGLE("Mic 2 to Mono Switch", AC97_LINE, 6, 1, 1), +AC97_SINGLE("Mic Boost (+20dB) Switch", AC97_LINE, 5, 1, 0), +AC97_ENUM("Mic to Headphone Mux", wm9713_enum[0]), +AC97_SINGLE("Mic Headphone Mixer Volume", AC97_LINE, 0, 7, 1), + +AC97_SINGLE("Capture Switch", AC97_CD, 15, 1, 1), +AC97_ENUM("Capture Volume Steps", wm9713_enum[4]), +AC97_DOUBLE("Capture Volume", AC97_CD, 8, 0, 15, 0), +AC97_SINGLE("Capture ZC Switch", AC97_CD, 7, 1, 0), + +AC97_ENUM("Capture to Headphone Mux", wm9713_enum[1]), +AC97_SINGLE("Capture to Headphone Volume", AC97_VIDEO, 11, 7, 1), +AC97_ENUM("Capture to Mono Mux", wm9713_enum[2]), +AC97_SINGLE("Capture to Mono Boost (+20dB) Switch", AC97_VIDEO, 8, 1, 0), +AC97_SINGLE("Capture ADC Boost (+20dB) Switch", AC97_VIDEO, 6, 1, 0), +AC97_ENUM("Capture Select", wm9713_enum[3]), + +AC97_SINGLE("ALC Target Volume", AC97_CODEC_CLASS_REV, 12, 15, 0), +AC97_SINGLE("ALC Hold Time", AC97_CODEC_CLASS_REV, 8, 15, 0), +AC97_SINGLE("ALC Decay Time ", AC97_CODEC_CLASS_REV, 4, 15, 0), +AC97_SINGLE("ALC Attack Time", AC97_CODEC_CLASS_REV, 0, 15, 0), +AC97_ENUM("ALC Function", wm9713_enum[5]), +AC97_SINGLE("ALC Max Volume", AC97_PCI_SVID, 11, 7, 0), +AC97_SINGLE("ALC ZC Timeout", AC97_PCI_SVID, 9, 3, 0), +AC97_SINGLE("ALC ZC Switch", AC97_PCI_SVID, 8, 1, 0), +AC97_SINGLE("ALC NG Switch", AC97_PCI_SVID, 7, 1, 0), +AC97_ENUM("ALC NG Type", wm9713_enum[13]), +AC97_SINGLE("ALC NG Threshold", AC97_PCI_SVID, 0, 31, 0), + +AC97_DOUBLE("Master ZC Switch", AC97_MASTER, 14, 6, 1, 0), +AC97_DOUBLE("Headphone ZC Switch", AC97_HEADPHONE, 14, 6, 1, 0), +AC97_DOUBLE("Out3/4 ZC Switch", AC97_MASTER_MONO, 14, 6, 1, 0), +AC97_SINGLE("Master Right Switch", AC97_MASTER, 7, 1, 1), +AC97_SINGLE("Headphone Right Switch", AC97_HEADPHONE, 7, 1, 1), +AC97_SINGLE("Out3/4 Right Switch", AC97_MASTER_MONO, 7, 1, 1), + +AC97_SINGLE("Mono In to Headphone Switch", AC97_MASTER_TONE, 15, 1, 1), +AC97_SINGLE("Mono In to Master Switch", AC97_MASTER_TONE, 14, 1, 1), +AC97_SINGLE("Mono In Volume", AC97_MASTER_TONE, 8, 31, 1), +AC97_SINGLE("Mono Switch", AC97_MASTER_TONE, 7, 1, 1), +AC97_SINGLE("Mono ZC Switch", AC97_MASTER_TONE, 6, 1, 0), +AC97_SINGLE("Mono Volume", AC97_MASTER_TONE, 0, 31, 1), + +AC97_SINGLE("PC Beep to Headphone Switch", AC97_AUX, 15, 1, 1), +AC97_SINGLE("PC Beep to Headphone Volume", AC97_AUX, 12, 7, 1), +AC97_SINGLE("PC Beep to Master Switch", AC97_AUX, 11, 1, 1), +AC97_SINGLE("PC Beep to Master Volume", AC97_AUX, 8, 7, 1), +AC97_SINGLE("PC Beep to Mono Switch", AC97_AUX, 7, 1, 1), +AC97_SINGLE("PC Beep to Mono Volume", AC97_AUX, 4, 7, 1), + +AC97_SINGLE("Voice to Headphone Switch", AC97_PCM, 15, 1, 1), +AC97_SINGLE("Voice to Headphone Volume", AC97_PCM, 12, 7, 1), +AC97_SINGLE("Voice to Master Switch", AC97_PCM, 11, 1, 1), +AC97_SINGLE("Voice to Master Volume", AC97_PCM, 8, 7, 1), +AC97_SINGLE("Voice to Mono Switch", AC97_PCM, 7, 1, 1), +AC97_SINGLE("Voice to Mono Volume", AC97_PCM, 4, 7, 1), + +AC97_SINGLE("Aux to Headphone Switch", AC97_REC_SEL, 15, 1, 1), +AC97_SINGLE("Aux to Headphone Volume", AC97_REC_SEL, 12, 7, 1), +AC97_SINGLE("Aux to Master Switch", AC97_REC_SEL, 11, 1, 1), +AC97_SINGLE("Aux to Master Volume", AC97_REC_SEL, 8, 7, 1), +AC97_SINGLE("Aux to Mono Switch", AC97_REC_SEL, 7, 1, 1), +AC97_SINGLE("Aux to Mono Volume", AC97_REC_SEL, 4, 7, 1), + +AC97_ENUM("Mono Input Mux", wm9713_enum[6]), +AC97_ENUM("Master Input Mux", wm9713_enum[7]), +AC97_ENUM("Headphone Input Mux", wm9713_enum[8]), +AC97_ENUM("Out 3 Input Mux", wm9713_enum[9]), +AC97_ENUM("Out 4 Input Mux", wm9713_enum[10]), + +AC97_ENUM("Bass Control", wm9713_enum[12]), +AC97_SINGLE("Bass Cut-off Switch", AC97_GENERAL_PURPOSE, 12, 1, 1), +AC97_SINGLE("Tone Cut-off Switch", AC97_GENERAL_PURPOSE, 4, 1, 1), +AC97_SINGLE("Playback Attenuate (-6dB) Switch", AC97_GENERAL_PURPOSE, 6, 1, 0), +AC97_SINGLE("Bass Volume", AC97_GENERAL_PURPOSE, 8, 15, 1), +AC97_SINGLE("Tone Volume", AC97_GENERAL_PURPOSE, 0, 15, 1), }; -static const snd_kcontrol_new_t wm13_snd_ac97_controls_dac[] = { -AC97_DOUBLE("DAC Volume", AC97_PHONE, 8, 0, 31, 1), -AC97_SINGLE("DAC to Headphone Mute", AC97_PHONE, 15, 1, 1), -AC97_SINGLE("DAC to Speaker Mute", AC97_PHONE, 14, 1, 1), -AC97_SINGLE("DAC to Mono Mute", AC97_PHONE, 13, 1, 1), +static const snd_kcontrol_new_t wm13_snd_ac97_controls_3d[] = { +AC97_ENUM("Inv Input Mux", wm9713_enum[11]), +AC97_SINGLE("3D Upper Cut-off Switch", AC97_REC_GAIN_MIC, 5, 1, 0), +AC97_SINGLE("3D Lower Cut-off Switch", AC97_REC_GAIN_MIC, 4, 1, 0), +AC97_SINGLE("3D Depth", AC97_REC_GAIN_MIC, 0, 15, 1), }; -static const snd_kcontrol_new_t wm13_snd_ac97_controls_mic[] = { -AC97_SINGLE("MICA Volume", AC97_MIC, 8, 31, 1), -AC97_SINGLE("MICB Volume", AC97_MIC, 0, 31, 1), -AC97_SINGLE("MICA to Mono Mute", AC97_LINE, 7, 1, 1), -AC97_SINGLE("MICB to Mono Mute", AC97_LINE, 6, 1, 1), -AC97_SINGLE("MIC Boost (+20dB)", AC97_LINE, 5, 1, 1), -AC97_ENUM("MIC Headphone Routing", wm9713_enum[0]), -AC97_SINGLE("MIC Headphone Mixer Volume", AC97_LINE, 0, 7, 1) -}; - -static const snd_kcontrol_new_t wm13_snd_ac97_controls_adc[] = { -AC97_SINGLE("ADC Mute", AC97_CD, 15, 1, 1), -AC97_DOUBLE("Gain Step Size (1.5dB/0.75dB)", AC97_CD, 14, 6, 1, 1), -AC97_DOUBLE("ADC Volume",AC97_CD, 8, 0, 15, 0), -AC97_SINGLE("ADC Zero Cross", AC97_CD, 7, 1, 1), -}; - -static const snd_kcontrol_new_t wm13_snd_ac97_controls_recsel[] = { -AC97_ENUM("Record to Headphone Path", wm9713_enum[1]), -AC97_SINGLE("Record to Headphone Volume", AC97_VIDEO, 11, 7, 0), -AC97_ENUM("Record to Mono Path", wm9713_enum[2]), -AC97_SINGLE("Record to Mono Boost (+20dB)", AC97_VIDEO, 8, 1, 0), -AC97_SINGLE("Record ADC Boost (+20dB)", AC97_VIDEO, 6, 1, 0), -AC97_ENUM("Record Select Left", wm9713_enum[3]), -AC97_ENUM("Record Select Right", wm9713_enum[4]), -}; +static int patch_wolfson_wm9713_3d (ac97_t * ac97) +{ + int err, i; + + for (i = 0; i < ARRAY_SIZE(wm13_snd_ac97_controls_3d); i++) { + if ((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&wm13_snd_ac97_controls_3d[i], ac97))) < 0) + return err; + } + return 0; +} static int patch_wolfson_wm9713_specific(ac97_t * ac97) { int err, i; - for (i = 0; i < ARRAY_SIZE(wm13_snd_ac97_controls_line_in); i++) { - if ((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&wm13_snd_ac97_controls_line_in[i], ac97))) < 0) + for (i = 0; i < ARRAY_SIZE(wm13_snd_ac97_controls); i++) { + if ((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&wm13_snd_ac97_controls[i], ac97))) < 0) return err; } snd_ac97_write_cache(ac97, AC97_PC_BEEP, 0x0808); - - for (i = 0; i < ARRAY_SIZE(wm13_snd_ac97_controls_dac); i++) { - if ((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&wm13_snd_ac97_controls_dac[i], ac97))) < 0) - return err; - } snd_ac97_write_cache(ac97, AC97_PHONE, 0x0808); - - for (i = 0; i < ARRAY_SIZE(wm13_snd_ac97_controls_mic); i++) { - if ((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&wm13_snd_ac97_controls_mic[i], ac97))) < 0) - return err; - } snd_ac97_write_cache(ac97, AC97_MIC, 0x0808); snd_ac97_write_cache(ac97, AC97_LINE, 0x00da); - - for (i = 0; i < ARRAY_SIZE(wm13_snd_ac97_controls_adc); i++) { - if ((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&wm13_snd_ac97_controls_adc[i], ac97))) < 0) - return err; - } snd_ac97_write_cache(ac97, AC97_CD, 0x0808); - - for (i = 0; i < ARRAY_SIZE(wm13_snd_ac97_controls_recsel); i++) { - if ((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&wm13_snd_ac97_controls_recsel[i], ac97))) < 0) - return err; - } snd_ac97_write_cache(ac97, AC97_VIDEO, 0xd612); snd_ac97_write_cache(ac97, AC97_REC_GAIN, 0x1ba0); - return 0; } @@ -525,6 +771,7 @@ static void patch_wolfson_wm9713_resume (ac97_t * ac97) static struct snd_ac97_build_ops patch_wolfson_wm9713_ops = { .build_specific = patch_wolfson_wm9713_specific, + .build_3d = patch_wolfson_wm9713_3d, #ifdef CONFIG_PM .suspend = patch_wolfson_wm9713_suspend, .resume = patch_wolfson_wm9713_resume @@ -533,10 +780,13 @@ static struct snd_ac97_build_ops patch_wolfson_wm9713_ops = { int patch_wolfson13(ac97_t * ac97) { + /* WM9713, WM9714 */ ac97->build_ops = &patch_wolfson_wm9713_ops; ac97->flags |= AC97_HAS_NO_REC_GAIN | AC97_STEREO_MUTES | AC97_HAS_NO_PHONE | - AC97_HAS_NO_PC_BEEP | AC97_HAS_NO_VIDEO | AC97_HAS_NO_CD; + AC97_HAS_NO_PC_BEEP | AC97_HAS_NO_VIDEO | AC97_HAS_NO_CD | AC97_HAS_NO_TONE | + AC97_HAS_NO_STD_PCM; + ac97->scaps &= ~AC97_SCAP_MODEM; snd_ac97_write_cache(ac97, AC97_EXTENDED_MID, 0xda00); snd_ac97_write_cache(ac97, AC97_EXTENDED_MSTATUS, 0x3810); @@ -1379,6 +1629,7 @@ static void check_ad1981_hp_jack_sense(ac97_t *ac97) u32 subid = ((u32)ac97->subsystem_vendor << 16) | ac97->subsystem_device; switch (subid) { case 0x103c0890: /* HP nc6000 */ + case 0x103c099c: /* HP nx6110 */ case 0x103c006d: /* HP nx9105 */ case 0x17340088: /* FSC Scenic-W */ /* enable headphone jack sense */ @@ -1706,7 +1957,7 @@ static const snd_kcontrol_new_t snd_ac97_controls_alc650[] = { }; static const snd_kcontrol_new_t snd_ac97_spdif_controls_alc650[] = { - AC97_SINGLE("IEC958 Capture Switch", AC97_ALC650_MULTICH, 11, 1, 0), + AC97_SINGLE(SNDRV_CTL_NAME_IEC958("",CAPTURE,SWITCH), AC97_ALC650_MULTICH, 11, 1, 0), AC97_SINGLE("Analog to IEC958 Output", AC97_ALC650_MULTICH, 12, 1, 0), /* disable this controls since it doesn't work as expected */ /* AC97_SINGLE("IEC958 Input Monitor", AC97_ALC650_MULTICH, 13, 1, 0), */ @@ -1849,12 +2100,12 @@ static int alc655_iec958_route_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_ } static const snd_kcontrol_new_t snd_ac97_spdif_controls_alc655[] = { - AC97_PAGE_SINGLE("IEC958 Capture Switch", AC97_ALC650_MULTICH, 11, 1, 0, 0), + AC97_PAGE_SINGLE(SNDRV_CTL_NAME_IEC958("",CAPTURE,SWITCH), AC97_ALC650_MULTICH, 11, 1, 0, 0), /* disable this controls since it doesn't work as expected */ /* AC97_PAGE_SINGLE("IEC958 Input Monitor", AC97_ALC650_MULTICH, 14, 1, 0, 0), */ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "IEC958 Playback Route", + .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,NONE) "Route", .info = alc655_iec958_route_info, .get = alc655_iec958_route_get, .put = alc655_iec958_route_put, @@ -2416,6 +2667,16 @@ int patch_vt1616(ac97_t * ac97) } /* + * VT1617A codec + */ +int patch_vt1617a(ac97_t * ac97) +{ + ac97->ext_id |= AC97_EI_SPDIF; /* force the detection of spdif */ + ac97->rates[AC97_RATES_SPDIF] = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000; + return 0; +} + +/* */ static void it2646_update_jacks(ac97_t *ac97) { @@ -2433,7 +2694,7 @@ static const snd_kcontrol_new_t snd_ac97_controls_it2646[] = { }; static const snd_kcontrol_new_t snd_ac97_spdif_controls_it2646[] = { - AC97_SINGLE("IEC958 Capture Switch", 0x76, 11, 1, 0), + AC97_SINGLE(SNDRV_CTL_NAME_IEC958("",CAPTURE,SWITCH), 0x76, 11, 1, 0), AC97_SINGLE("Analog to IEC958 Output", 0x76, 12, 1, 0), AC97_SINGLE("IEC958 Input Monitor", 0x76, 13, 1, 0), }; diff --git a/sound/pci/ac97/ac97_patch.h b/sound/pci/ac97/ac97_patch.h index 7b7377d0f2ae..ec1811320106 100644 --- a/sound/pci/ac97/ac97_patch.h +++ b/sound/pci/ac97/ac97_patch.h @@ -56,5 +56,6 @@ int patch_cm9739(ac97_t * ac97); int patch_cm9761(ac97_t * ac97); int patch_cm9780(ac97_t * ac97); int patch_vt1616(ac97_t * ac97); +int patch_vt1617a(ac97_t * ac97); int patch_it2646(ac97_t * ac97); int mpatch_si3036(ac97_t * ac97); diff --git a/sound/pci/ali5451/ali5451.c b/sound/pci/ali5451/ali5451.c index f08ae71f902d..ce6c9fadb594 100644 --- a/sound/pci/ali5451/ali5451.c +++ b/sound/pci/ali5451/ali5451.c @@ -1842,7 +1842,7 @@ static int __devinit snd_ali_pcm(ali_t * codec, int device, struct ali_pcm_descr return 0; } -struct ali_pcm_description ali_pcms[] = { +static struct ali_pcm_description ali_pcms[] = { { "ALI 5451", ALI_CHANNELS, 1, &snd_ali_playback_ops, &snd_ali_capture_ops }, { "ALI 5451 modem", 1, 1, &snd_ali_modem_playback_ops, &snd_ali_modem_capture_ops } }; @@ -1959,9 +1959,9 @@ static int snd_ali5451_spdif_put(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t static snd_kcontrol_new_t snd_ali5451_mixer_spdif[] __devinitdata = { /* spdif aplayback switch */ /* FIXME: "IEC958 Playback Switch" may conflict with one on ac97_codec */ - ALI5451_SPDIF("IEC958 Output switch", 0, 0), + ALI5451_SPDIF(SNDRV_CTL_NAME_IEC958("Output ",NONE,SWITCH), 0, 0), /* spdif out to spdif channel */ - ALI5451_SPDIF("IEC958 Channel Output Switch", 0, 1), + ALI5451_SPDIF(SNDRV_CTL_NAME_IEC958("Channel Output ",NONE,SWITCH), 0, 1), /* spdif in from spdif channel */ ALI5451_SPDIF(SNDRV_CTL_NAME_IEC958("",CAPTURE,SWITCH), 0, 2) }; diff --git a/sound/pci/atiixp.c b/sound/pci/atiixp.c index cafab4af5c57..904d17394e1c 100644 --- a/sound/pci/atiixp.c +++ b/sound/pci/atiixp.c @@ -248,6 +248,7 @@ struct snd_atiixp_dma { unsigned int period_bytes, periods; int opened; int running; + int suspended; int pcm_open_flag; int ac97_pcm_type; /* index # of ac97_pcm to access, -1 = not used */ unsigned int saved_curptr; @@ -699,12 +700,18 @@ static int snd_atiixp_pcm_trigger(snd_pcm_substream_t *substream, int cmd) spin_lock(&chip->reg_lock); switch (cmd) { case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + case SNDRV_PCM_TRIGGER_RESUME: dma->ops->enable_transfer(chip, 1); dma->running = 1; + dma->suspended = 0; break; case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + case SNDRV_PCM_TRIGGER_SUSPEND: dma->ops->enable_transfer(chip, 0); dma->running = 0; + dma->suspended = cmd == SNDRV_PCM_TRIGGER_SUSPEND; break; default: err = -EINVAL; @@ -975,6 +982,7 @@ static snd_pcm_hardware_t snd_atiixp_pcm_hw = { .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME | SNDRV_PCM_INFO_MMAP_VALID), .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE, @@ -1443,7 +1451,7 @@ static int snd_atiixp_resume(snd_card_t *card) for (i = 0; i < NUM_ATI_PCMDEVS; i++) if (chip->pcmdevs[i]) { atiixp_dma_t *dma = &chip->dmas[i]; - if (dma->substream && dma->running) { + if (dma->substream && dma->suspended) { dma->ops->enable_dma(chip, 1); writel((u32)dma->desc_buf.addr | ATI_REG_LINKPTR_EN, chip->remap_addr + dma->ops->llp_offset); diff --git a/sound/pci/au88x0/au88x0_pcm.c b/sound/pci/au88x0/au88x0_pcm.c index 04dcefd8b8ff..38bd2b5dd434 100644 --- a/sound/pci/au88x0/au88x0_pcm.c +++ b/sound/pci/au88x0/au88x0_pcm.c @@ -33,7 +33,7 @@ /* hardware definition */ static snd_pcm_hardware_t snd_vortex_playback_hw_adb = { .info = - (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_RESUME | + (SNDRV_PCM_INFO_MMAP | /* SNDRV_PCM_INFO_RESUME | */ SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_MMAP_VALID), .formats = @@ -58,7 +58,7 @@ static snd_pcm_hardware_t snd_vortex_playback_hw_adb = { #ifndef CHIP_AU8820 static snd_pcm_hardware_t snd_vortex_playback_hw_a3d = { .info = - (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_RESUME | + (SNDRV_PCM_INFO_MMAP | /* SNDRV_PCM_INFO_RESUME | */ SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_MMAP_VALID), .formats = @@ -78,7 +78,7 @@ static snd_pcm_hardware_t snd_vortex_playback_hw_a3d = { #endif static snd_pcm_hardware_t snd_vortex_playback_hw_spdif = { .info = - (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_RESUME | + (SNDRV_PCM_INFO_MMAP | /* SNDRV_PCM_INFO_RESUME | */ SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_MMAP_VALID), .formats = @@ -220,8 +220,10 @@ snd_vortex_pcm_hw_params(snd_pcm_substream_t * substream, vortex_adb_allocroute(chip, -1, params_channels(hw_params), substream->stream, type); - if (dma < 0) + if (dma < 0) { + spin_unlock_irq(&chip->lock); return dma; + } stream = substream->runtime->private_data = &chip->dma_adb[dma]; stream->substream = substream; /* Setup Buffers. */ diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c index 95c289284267..7e27bfc37439 100644 --- a/sound/pci/ca0106/ca0106_main.c +++ b/sound/pci/ca0106/ca0106_main.c @@ -188,6 +188,14 @@ static ca0106_details_t ca0106_chip_details[] = { .name = "MSI K8N Diamond MB [SB0438]", .gpio_type = 1, .i2c_adc = 1 } , + /* Shuttle XPC SD31P which has an onboard Creative Labs Sound Blaster Live! 24-bit EAX + * high-definition 7.1 audio processor". + * Added using info from andrewvegan in alsa bug #1298 + */ + { .serial = 0x30381297, + .name = "Shuttle XPC SD31P [SD31P]", + .gpio_type = 1, + .i2c_adc = 1 } , { .serial = 0, .name = "AudigyLS [Unknown]" } }; diff --git a/sound/pci/ca0106/ca0106_mixer.c b/sound/pci/ca0106/ca0106_mixer.c index 0e5e9ce0ff28..b6b8882ce704 100644 --- a/sound/pci/ca0106/ca0106_mixer.c +++ b/sound/pci/ca0106/ca0106_mixer.c @@ -297,7 +297,7 @@ static int snd_ca0106_spdif_put(snd_kcontrol_t * kcontrol, static snd_kcontrol_new_t snd_ca0106_spdif_mask_control = { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,MASK), .count = 4, .info = snd_ca0106_spdif_info, @@ -306,7 +306,7 @@ static snd_kcontrol_new_t snd_ca0106_spdif_mask_control = static snd_kcontrol_new_t snd_ca0106_spdif_control = { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT), .count = 4, .info = snd_ca0106_spdif_info, diff --git a/sound/pci/cmipci.c b/sound/pci/cmipci.c index f5a4ac1ceef9..b098b51099c2 100644 --- a/sound/pci/cmipci.c +++ b/sound/pci/cmipci.c @@ -1029,7 +1029,7 @@ static int snd_cmipci_spdif_mask_get(snd_kcontrol_t * kcontrol, static snd_kcontrol_new_t snd_cmipci_spdif_mask __devinitdata = { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,CON_MASK), .info = snd_cmipci_spdif_mask_info, .get = snd_cmipci_spdif_mask_get, diff --git a/sound/pci/cs46xx/cs46xx.c b/sound/pci/cs46xx/cs46xx.c index db212ecd792a..b9fff4ee6f9d 100644 --- a/sound/pci/cs46xx/cs46xx.c +++ b/sound/pci/cs46xx/cs46xx.c @@ -113,7 +113,7 @@ static int __devinit snd_card_cs46xx_probe(struct pci_dev *pci, return err; } #endif - if ((err = snd_cs46xx_mixer(chip)) < 0) { + if ((err = snd_cs46xx_mixer(chip, 2)) < 0) { snd_card_free(card); return err; } diff --git a/sound/pci/cs46xx/cs46xx_lib.c b/sound/pci/cs46xx/cs46xx_lib.c index ff28af1f658e..4b052158ee33 100644 --- a/sound/pci/cs46xx/cs46xx_lib.c +++ b/sound/pci/cs46xx/cs46xx_lib.c @@ -1243,8 +1243,8 @@ static snd_pcm_hardware_t snd_cs46xx_playback = { .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_RESUME), + SNDRV_PCM_INFO_BLOCK_TRANSFER /*|*/ + /*SNDRV_PCM_INFO_RESUME*/), .formats = (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE | SNDRV_PCM_FMTBIT_U16_LE | SNDRV_PCM_FMTBIT_U16_BE), @@ -1265,8 +1265,8 @@ static snd_pcm_hardware_t snd_cs46xx_capture = { .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_RESUME), + SNDRV_PCM_INFO_BLOCK_TRANSFER /*|*/ + /*SNDRV_PCM_INFO_RESUME*/), .formats = SNDRV_PCM_FMTBIT_S16_LE, .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000, .rate_min = 5500, @@ -2231,7 +2231,7 @@ static snd_kcontrol_new_t snd_cs46xx_controls[] __devinitdata = { }, { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "IEC958 Output Switch", + .name = SNDRV_CTL_NAME_IEC958("Output ",NONE,SWITCH), .info = snd_mixer_boolean_info, .get = snd_cs46xx_iec958_get, .put = snd_cs46xx_iec958_put, @@ -2239,7 +2239,7 @@ static snd_kcontrol_new_t snd_cs46xx_controls[] __devinitdata = { }, { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "IEC958 Input Switch", + .name = SNDRV_CTL_NAME_IEC958("Input ",NONE,SWITCH), .info = snd_mixer_boolean_info, .get = snd_cs46xx_iec958_get, .put = snd_cs46xx_iec958_put, @@ -2249,7 +2249,7 @@ static snd_kcontrol_new_t snd_cs46xx_controls[] __devinitdata = { /* Input IEC958 volume does not work for the moment. (Benny) */ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "IEC958 Input Volume", + .name = SNDRV_CTL_NAME_IEC958("Input ",NONE,VOLUME), .info = snd_cs46xx_vol_info, .get = snd_cs46xx_vol_iec958_get, .put = snd_cs46xx_vol_iec958_put, @@ -2440,7 +2440,7 @@ static int __devinit cs46xx_detect_codec(cs46xx_t *chip, int codec) return -ENXIO; } -int __devinit snd_cs46xx_mixer(cs46xx_t *chip) +int __devinit snd_cs46xx_mixer(cs46xx_t *chip, int spdif_device) { snd_card_t *card = chip->card; snd_ctl_elem_id_t id; @@ -2476,6 +2476,8 @@ int __devinit snd_cs46xx_mixer(cs46xx_t *chip) for (idx = 0; idx < ARRAY_SIZE(snd_cs46xx_controls); idx++) { snd_kcontrol_t *kctl; kctl = snd_ctl_new1(&snd_cs46xx_controls[idx], chip); + if (kctl && kctl->id.iface == SNDRV_CTL_ELEM_IFACE_PCM) + kctl->id.device = spdif_device; if ((err = snd_ctl_add(card, kctl)) < 0) return err; } diff --git a/sound/pci/emu10k1/emu10k1.c b/sound/pci/emu10k1/emu10k1.c index b17142cabead..fc377c4b666c 100644 --- a/sound/pci/emu10k1/emu10k1.c +++ b/sound/pci/emu10k1/emu10k1.c @@ -149,7 +149,7 @@ static int __devinit snd_card_emu10k1_probe(struct pci_dev *pci, } } - if ((err = snd_emu10k1_mixer(emu)) < 0) { + if ((err = snd_emu10k1_mixer(emu, 0, 3)) < 0) { snd_card_free(card); return err; } diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c index 746b51ef3966..e69d5b739e80 100644 --- a/sound/pci/emu10k1/emu10k1_main.c +++ b/sound/pci/emu10k1/emu10k1_main.c @@ -741,12 +741,20 @@ static emu_chip_details_t emu_chip_details[] = { .emu10k1_chip = 1, .ac97_chip = 1, .sblive51 = 1} , + /* Tested by Thomas Zehetbauer 27th Aug 2005 */ + {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80651102, + .driver = "EMU10K1", .name = "SB Live 5.1 [SB0220]", + .id = "Live", + .emu10k1_chip = 1, + .ac97_chip = 1, + .sblive51 = 1} , {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80641102, .driver = "EMU10K1", .name = "SB Live 5.1", .id = "Live", .emu10k1_chip = 1, .ac97_chip = 1, .sblive51 = 1} , + /* Tested by alsa bugtrack user "hus" 12th Sept 2005 */ {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80611102, .driver = "EMU10K1", .name = "SBLive! Player 5.1 [SB0060]", .id = "Live", diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c index e90c5ddd1d17..52c7826df440 100644 --- a/sound/pci/emu10k1/emu10k1x.c +++ b/sound/pci/emu10k1/emu10k1x.c @@ -1183,7 +1183,7 @@ static int snd_emu10k1x_spdif_put(snd_kcontrol_t * kcontrol, static snd_kcontrol_new_t snd_emu10k1x_spdif_mask_control = { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,MASK), .count = 3, .info = snd_emu10k1x_spdif_info, @@ -1192,7 +1192,7 @@ static snd_kcontrol_new_t snd_emu10k1x_spdif_mask_control = static snd_kcontrol_new_t snd_emu10k1x_spdif_control = { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT), .count = 3, .info = snd_emu10k1x_spdif_info, diff --git a/sound/pci/emu10k1/emufx.c b/sound/pci/emu10k1/emufx.c index 0529fb281125..637c555cfdb1 100644 --- a/sound/pci/emu10k1/emufx.c +++ b/sound/pci/emu10k1/emufx.c @@ -1159,12 +1159,12 @@ A_OP(icode, &ptr, iMAC0, A_GPR(var), A_GPR(var), A_GPR(vol), A_EXTIN(input)) /* Optical SPDIF Playback Volume */ A_ADD_VOLUME_IN(stereo_mix, gpr, A_EXTIN_OPT_SPDIF_L); A_ADD_VOLUME_IN(stereo_mix+1, gpr+1, A_EXTIN_OPT_SPDIF_R); - snd_emu10k1_init_stereo_control(&controls[nctl++], "IEC958 Optical Playback Volume", gpr, 0); + snd_emu10k1_init_stereo_control(&controls[nctl++], SNDRV_CTL_NAME_IEC958("Optical ",PLAYBACK,VOLUME), gpr, 0); gpr += 2; /* Optical SPDIF Capture Volume */ A_ADD_VOLUME_IN(capture, gpr, A_EXTIN_OPT_SPDIF_L); A_ADD_VOLUME_IN(capture+1, gpr+1, A_EXTIN_OPT_SPDIF_R); - snd_emu10k1_init_stereo_control(&controls[nctl++], "IEC958 Optical Capture Volume", gpr, 0); + snd_emu10k1_init_stereo_control(&controls[nctl++], SNDRV_CTL_NAME_IEC958("Optical ",CAPTURE,VOLUME), gpr, 0); gpr += 2; /* Line2 Playback Volume */ @@ -1389,7 +1389,7 @@ A_OP(icode, &ptr, iMAC0, A_GPR(var), A_GPR(var), A_GPR(vol), A_EXTIN(input)) A_OP(icode, &ptr, iACC3, A_EXTOUT(A_EXTOUT_FRONT_L + z), A_GPR(tmp + 0), A_GPR(tmp + 1), A_C_00000000); } } - snd_emu10k1_init_stereo_onoff_control(controls + nctl++, "IEC958 Optical Raw Playback Switch", gpr, 0); + snd_emu10k1_init_stereo_onoff_control(controls + nctl++, SNDRV_CTL_NAME_IEC958("Optical Raw ",PLAYBACK,SWITCH), gpr, 0); gpr += 2; A_PUT_STEREO_OUTPUT(A_EXTOUT_REAR_L, A_EXTOUT_REAR_R, playback+2 + SND_EMU10K1_PLAYBACK_CHANNELS); @@ -1716,7 +1716,7 @@ static int __devinit _snd_emu10k1_init_efx(emu10k1_t *emu) /* IEC958 TTL Playback Volume */ for (z = 0; z < 2; z++) VOLUME_ADDIN(icode, &ptr, playback + z, EXTIN_SPDIF_CD_L + z, gpr + z); - snd_emu10k1_init_stereo_control(controls + i++, "IEC958 TTL Playback Volume", gpr, 0); + snd_emu10k1_init_stereo_control(controls + i++, SNDRV_CTL_NAME_IEC958("TTL ",PLAYBACK,VOLUME), gpr, 0); gpr += 2; /* IEC958 TTL Capture Volume + Switch */ @@ -1724,8 +1724,8 @@ static int __devinit _snd_emu10k1_init_efx(emu10k1_t *emu) SWITCH_IN(icode, &ptr, tmp + 0, EXTIN_SPDIF_CD_L + z, gpr + 2 + z); VOLUME_ADD(icode, &ptr, capture + z, tmp + 0, gpr + z); } - snd_emu10k1_init_stereo_control(controls + i++, "IEC958 TTL Capture Volume", gpr, 0); - snd_emu10k1_init_stereo_onoff_control(controls + i++, "IEC958 TTL Capture Switch", gpr + 2, 0); + snd_emu10k1_init_stereo_control(controls + i++, SNDRV_CTL_NAME_IEC958("TTL ",CAPTURE,VOLUME), gpr, 0); + snd_emu10k1_init_stereo_onoff_control(controls + i++, SNDRV_CTL_NAME_IEC958("TTL ",CAPTURE,SWITCH), gpr + 2, 0); gpr += 4; } @@ -1750,7 +1750,7 @@ static int __devinit _snd_emu10k1_init_efx(emu10k1_t *emu) /* IEC958 Optical Playback Volume */ for (z = 0; z < 2; z++) VOLUME_ADDIN(icode, &ptr, playback + z, EXTIN_TOSLINK_L + z, gpr + z); - snd_emu10k1_init_stereo_control(controls + i++, "IEC958 LiveDrive Playback Volume", gpr, 0); + snd_emu10k1_init_stereo_control(controls + i++, SNDRV_CTL_NAME_IEC958("LiveDrive ",PLAYBACK,VOLUME), gpr, 0); gpr += 2; /* IEC958 Optical Capture Volume */ @@ -1758,8 +1758,8 @@ static int __devinit _snd_emu10k1_init_efx(emu10k1_t *emu) SWITCH_IN(icode, &ptr, tmp + 0, EXTIN_TOSLINK_L + z, gpr + 2 + z); VOLUME_ADD(icode, &ptr, capture + z, tmp + 0, gpr + z); } - snd_emu10k1_init_stereo_control(controls + i++, "IEC958 LiveDrive Capture Volume", gpr, 0); - snd_emu10k1_init_stereo_onoff_control(controls + i++, "IEC958 LiveDrive Capture Switch", gpr + 2, 0); + snd_emu10k1_init_stereo_control(controls + i++, SNDRV_CTL_NAME_IEC958("LiveDrive ",CAPTURE,VOLUME), gpr, 0); + snd_emu10k1_init_stereo_onoff_control(controls + i++, SNDRV_CTL_NAME_IEC958("LiveDrive ",CAPTURE,SWITCH), gpr + 2, 0); gpr += 4; } @@ -1784,7 +1784,7 @@ static int __devinit _snd_emu10k1_init_efx(emu10k1_t *emu) /* IEC958 Coax Playback Volume */ for (z = 0; z < 2; z++) VOLUME_ADDIN(icode, &ptr, playback + z, EXTIN_COAX_SPDIF_L + z, gpr + z); - snd_emu10k1_init_stereo_control(controls + i++, "IEC958 Coaxial Playback Volume", gpr, 0); + snd_emu10k1_init_stereo_control(controls + i++, SNDRV_CTL_NAME_IEC958("Coaxial ",PLAYBACK,VOLUME), gpr, 0); gpr += 2; /* IEC958 Coax Capture Volume + Switch */ @@ -1792,8 +1792,8 @@ static int __devinit _snd_emu10k1_init_efx(emu10k1_t *emu) SWITCH_IN(icode, &ptr, tmp + 0, EXTIN_COAX_SPDIF_L + z, gpr + 2 + z); VOLUME_ADD(icode, &ptr, capture + z, tmp + 0, gpr + z); } - snd_emu10k1_init_stereo_control(controls + i++, "IEC958 Coaxial Capture Volume", gpr, 0); - snd_emu10k1_init_stereo_onoff_control(controls + i++, "IEC958 Coaxial Capture Switch", gpr + 2, 0); + snd_emu10k1_init_stereo_control(controls + i++, SNDRV_CTL_NAME_IEC958("Coaxial ",CAPTURE,VOLUME), gpr, 0); + snd_emu10k1_init_stereo_onoff_control(controls + i++, SNDRV_CTL_NAME_IEC958("Coaxial ",CAPTURE,SWITCH), gpr + 2, 0); gpr += 4; } @@ -1920,7 +1920,7 @@ static int __devinit _snd_emu10k1_init_efx(emu10k1_t *emu) #endif } - snd_emu10k1_init_stereo_onoff_control(controls + i++, "IEC958 Optical Raw Playback Switch", gpr, 0); + snd_emu10k1_init_stereo_onoff_control(controls + i++, SNDRV_CTL_NAME_IEC958("Optical Raw ",PLAYBACK,SWITCH), gpr, 0); gpr += 2; } diff --git a/sound/pci/emu10k1/emumixer.c b/sound/pci/emu10k1/emumixer.c index 6be82c5fe138..d71a72e84bcc 100644 --- a/sound/pci/emu10k1/emumixer.c +++ b/sound/pci/emu10k1/emumixer.c @@ -181,7 +181,7 @@ static int snd_emu10k1_spdif_put(snd_kcontrol_t * kcontrol, static snd_kcontrol_new_t snd_emu10k1_spdif_mask_control = { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,MASK), .count = 4, .info = snd_emu10k1_spdif_info, @@ -190,7 +190,7 @@ static snd_kcontrol_new_t snd_emu10k1_spdif_mask_control = static snd_kcontrol_new_t snd_emu10k1_spdif_control = { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT), .count = 4, .info = snd_emu10k1_spdif_info, @@ -295,7 +295,7 @@ static int snd_emu10k1_send_routing_put(snd_kcontrol_t * kcontrol, static snd_kcontrol_new_t snd_emu10k1_send_routing_control = { .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_INACTIVE, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = "EMU10K1 PCM Send Routing", .count = 32, .info = snd_emu10k1_send_routing_info, @@ -364,7 +364,7 @@ static int snd_emu10k1_send_volume_put(snd_kcontrol_t * kcontrol, static snd_kcontrol_new_t snd_emu10k1_send_volume_control = { .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_INACTIVE, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = "EMU10K1 PCM Send Volume", .count = 32, .info = snd_emu10k1_send_volume_info, @@ -427,7 +427,7 @@ static int snd_emu10k1_attn_put(snd_kcontrol_t * kcontrol, static snd_kcontrol_new_t snd_emu10k1_attn_control = { .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_INACTIVE, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = "EMU10K1 PCM Volume", .count = 32, .info = snd_emu10k1_attn_info, @@ -737,7 +737,8 @@ static int rename_ctl(snd_card_t *card, const char *src, const char *dst) return -ENOENT; } -int __devinit snd_emu10k1_mixer(emu10k1_t *emu) +int __devinit snd_emu10k1_mixer(emu10k1_t *emu, + int pcm_device, int multi_device) { int err, pcm; snd_kcontrol_t *kctl; @@ -852,29 +853,35 @@ int __devinit snd_emu10k1_mixer(emu10k1_t *emu) if ((kctl = emu->ctl_send_routing = snd_ctl_new1(&snd_emu10k1_send_routing_control, emu)) == NULL) return -ENOMEM; + kctl->id.device = pcm_device; if ((err = snd_ctl_add(card, kctl))) return err; if ((kctl = emu->ctl_send_volume = snd_ctl_new1(&snd_emu10k1_send_volume_control, emu)) == NULL) return -ENOMEM; + kctl->id.device = pcm_device; if ((err = snd_ctl_add(card, kctl))) return err; if ((kctl = emu->ctl_attn = snd_ctl_new1(&snd_emu10k1_attn_control, emu)) == NULL) return -ENOMEM; + kctl->id.device = pcm_device; if ((err = snd_ctl_add(card, kctl))) return err; if ((kctl = emu->ctl_efx_send_routing = snd_ctl_new1(&snd_emu10k1_efx_send_routing_control, emu)) == NULL) return -ENOMEM; + kctl->id.device = multi_device; if ((err = snd_ctl_add(card, kctl))) return err; if ((kctl = emu->ctl_efx_send_volume = snd_ctl_new1(&snd_emu10k1_efx_send_volume_control, emu)) == NULL) return -ENOMEM; + kctl->id.device = multi_device; if ((err = snd_ctl_add(card, kctl))) return err; if ((kctl = emu->ctl_efx_attn = snd_ctl_new1(&snd_emu10k1_efx_attn_control, emu)) == NULL) return -ENOMEM; + kctl->id.device = multi_device; if ((err = snd_ctl_add(card, kctl))) return err; @@ -924,10 +931,14 @@ int __devinit snd_emu10k1_mixer(emu10k1_t *emu) /* sb live! and audigy */ if ((kctl = snd_ctl_new1(&snd_emu10k1_spdif_mask_control, emu)) == NULL) return -ENOMEM; + if (!emu->audigy) + kctl->id.device = emu->pcm_efx->device; if ((err = snd_ctl_add(card, kctl))) return err; if ((kctl = snd_ctl_new1(&snd_emu10k1_spdif_control, emu)) == NULL) return -ENOMEM; + if (!emu->audigy) + kctl->id.device = emu->pcm_efx->device; if ((err = snd_ctl_add(card, kctl))) return err; } diff --git a/sound/pci/emu10k1/emupcm.c b/sound/pci/emu10k1/emupcm.c index 520b99af5f55..9c35f6dde1b5 100644 --- a/sound/pci/emu10k1/emupcm.c +++ b/sound/pci/emu10k1/emupcm.c @@ -1682,6 +1682,7 @@ static void snd_emu10k1_pcm_efx_free(snd_pcm_t *pcm) int __devinit snd_emu10k1_pcm_efx(emu10k1_t * emu, int device, snd_pcm_t ** rpcm) { snd_pcm_t *pcm; + snd_kcontrol_t *kctl; int err; if (rpcm) @@ -1714,7 +1715,11 @@ int __devinit snd_emu10k1_pcm_efx(emu10k1_t * emu, int device, snd_pcm_t ** rpcm emu->efx_voices_mask[0] = 0xffff0000; emu->efx_voices_mask[1] = 0; } - snd_ctl_add(emu->card, snd_ctl_new1(&snd_emu10k1_pcm_efx_voices_mask, emu)); + kctl = snd_ctl_new1(&snd_emu10k1_pcm_efx_voices_mask, emu); + if (!kctl) + return -ENOMEM; + kctl->id.device = device; + snd_ctl_add(emu->card, kctl); snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(emu->pci), 64*1024, 64*1024); diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c index 78a81f3912a1..f06b95f41a1d 100644 --- a/sound/pci/ens1370.c +++ b/sound/pci/ens1370.c @@ -1444,7 +1444,7 @@ static int snd_es1371_spdif_put(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t /* spdif controls */ static snd_kcontrol_new_t snd_es1371_mixer_spdif[] __devinitdata = { - ES1371_SPDIF("IEC958 Playback Switch"), + ES1371_SPDIF(SNDRV_CTL_NAME_IEC958("",PLAYBACK,SWITCH)), { .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT), diff --git a/sound/pci/fm801.c b/sound/pci/fm801.c index ff10e637a95e..36b2f62e8573 100644 --- a/sound/pci/fm801.c +++ b/sound/pci/fm801.c @@ -1155,10 +1155,10 @@ FM801_SINGLE("FM Playback Switch", FM801_FM_VOL, 15, 1, 1), static snd_kcontrol_new_t snd_fm801_controls_multi[] __devinitdata = { FM801_SINGLE("AC97 2ch->4ch Copy Switch", FM801_CODEC_CTRL, 7, 1, 0), FM801_SINGLE("AC97 18-bit Switch", FM801_CODEC_CTRL, 10, 1, 0), -FM801_SINGLE("IEC958 Capture Switch", FM801_I2S_MODE, 8, 1, 0), -FM801_SINGLE("IEC958 Raw Data Playback Switch", FM801_I2S_MODE, 9, 1, 0), -FM801_SINGLE("IEC958 Raw Data Capture Switch", FM801_I2S_MODE, 10, 1, 0), -FM801_SINGLE("IEC958 Playback Switch", FM801_GEN_CTRL, 2, 1, 0), +FM801_SINGLE(SNDRV_CTL_NAME_IEC958("",CAPTURE,SWITCH), FM801_I2S_MODE, 8, 1, 0), +FM801_SINGLE(SNDRV_CTL_NAME_IEC958("Raw Data ",PLAYBACK,SWITCH), FM801_I2S_MODE, 9, 1, 0), +FM801_SINGLE(SNDRV_CTL_NAME_IEC958("Raw Data ",CAPTURE,SWITCH), FM801_I2S_MODE, 10, 1, 0), +FM801_SINGLE(SNDRV_CTL_NAME_IEC958("",PLAYBACK,SWITCH), FM801_GEN_CTRL, 2, 1, 0), }; static void snd_fm801_mixer_free_ac97_bus(ac97_bus_t *bus) diff --git a/sound/pci/hda/Makefile b/sound/pci/hda/Makefile index bd8cb33c4fb4..ddfb5ff7fb8f 100644 --- a/sound/pci/hda/Makefile +++ b/sound/pci/hda/Makefile @@ -1,5 +1,5 @@ snd-hda-intel-objs := hda_intel.o -snd-hda-codec-objs := hda_codec.o hda_generic.o patch_realtek.o patch_cmedia.o patch_analog.o patch_sigmatel.o +snd-hda-codec-objs := hda_codec.o hda_generic.o patch_realtek.o patch_cmedia.o patch_analog.o patch_sigmatel.o patch_si3054.o ifdef CONFIG_PROC_FS snd-hda-codec-objs += hda_proc.o endif diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index e2cf02387289..20f7762f7144 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -432,22 +432,26 @@ void snd_hda_get_codec_name(struct hda_codec *codec, } /* - * look for an AFG node - * - * return 0 if not found + * look for an AFG and MFG nodes */ -static int look_for_afg_node(struct hda_codec *codec) +static void setup_fg_nodes(struct hda_codec *codec) { int i, total_nodes; hda_nid_t nid; total_nodes = snd_hda_get_sub_nodes(codec, AC_NODE_ROOT, &nid); for (i = 0; i < total_nodes; i++, nid++) { - if ((snd_hda_param_read(codec, nid, AC_PAR_FUNCTION_TYPE) & 0xff) == - AC_GRP_AUDIO_FUNCTION) - return nid; + switch((snd_hda_param_read(codec, nid, AC_PAR_FUNCTION_TYPE) & 0xff)) { + case AC_GRP_AUDIO_FUNCTION: + codec->afg = nid; + break; + case AC_GRP_MODEM_FUNCTION: + codec->mfg = nid; + break; + default: + break; + } } - return 0; } /* @@ -507,10 +511,9 @@ int snd_hda_codec_new(struct hda_bus *bus, unsigned int codec_addr, codec->subsystem_id = snd_hda_param_read(codec, AC_NODE_ROOT, AC_PAR_SUBSYSTEM_ID); codec->revision_id = snd_hda_param_read(codec, AC_NODE_ROOT, AC_PAR_REV_ID); - /* FIXME: support for multiple AFGs? */ - codec->afg = look_for_afg_node(codec); - if (! codec->afg) { - snd_printdd("hda_codec: no AFG node found\n"); + setup_fg_nodes(codec); + if (! codec->afg && ! codec->mfg) { + snd_printdd("hda_codec: no AFG or MFG node found\n"); snd_hda_codec_free(codec); return -ENODEV; } @@ -749,12 +752,14 @@ int snd_hda_mixer_amp_volume_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t long *valp = ucontrol->value.integer.value; int change = 0; - if (chs & 1) + if (chs & 1) { change = snd_hda_codec_amp_update(codec, nid, 0, dir, idx, 0x7f, *valp); + valp++; + } if (chs & 2) change |= snd_hda_codec_amp_update(codec, nid, 1, dir, idx, - 0x7f, valp[1]); + 0x7f, *valp); return change; } @@ -796,12 +801,15 @@ int snd_hda_mixer_amp_switch_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t long *valp = ucontrol->value.integer.value; int change = 0; - if (chs & 1) + if (chs & 1) { change = snd_hda_codec_amp_update(codec, nid, 0, dir, idx, 0x80, *valp ? 0 : 0x80); + valp++; + } if (chs & 2) change |= snd_hda_codec_amp_update(codec, nid, 1, dir, idx, - 0x80, valp[1] ? 0 : 0x80); + 0x80, *valp ? 0 : 0x80); + return change; } @@ -1155,8 +1163,16 @@ int snd_hda_build_controls(struct hda_bus *bus) /* * stream formats */ -static unsigned int rate_bits[][3] = { +struct hda_rate_tbl { + unsigned int hz; + unsigned int alsa_bits; + unsigned int hda_fmt; +}; + +static struct hda_rate_tbl rate_bits[] = { /* rate in Hz, ALSA rate bitmask, HDA format value */ + + /* autodetected value used in snd_hda_query_supported_pcm */ { 8000, SNDRV_PCM_RATE_8000, 0x0500 }, /* 1/6 x 48 */ { 11025, SNDRV_PCM_RATE_11025, 0x4300 }, /* 1/4 x 44 */ { 16000, SNDRV_PCM_RATE_16000, 0x0200 }, /* 1/3 x 48 */ @@ -1168,7 +1184,11 @@ static unsigned int rate_bits[][3] = { { 96000, SNDRV_PCM_RATE_96000, 0x0800 }, /* 2 x 48 */ { 176400, SNDRV_PCM_RATE_176400, 0x5800 },/* 4 x 44 */ { 192000, SNDRV_PCM_RATE_192000, 0x1800 }, /* 4 x 48 */ - { 0 } + + /* not autodetected value */ + { 9600, SNDRV_PCM_RATE_KNOT, 0x0400 }, /* 1/5 x 48 */ + + { 0 } /* terminator */ }; /** @@ -1190,12 +1210,12 @@ unsigned int snd_hda_calc_stream_format(unsigned int rate, int i; unsigned int val = 0; - for (i = 0; rate_bits[i][0]; i++) - if (rate_bits[i][0] == rate) { - val = rate_bits[i][2]; + for (i = 0; rate_bits[i].hz; i++) + if (rate_bits[i].hz == rate) { + val = rate_bits[i].hda_fmt; break; } - if (! rate_bits[i][0]) { + if (! rate_bits[i].hz) { snd_printdd("invalid rate %d\n", rate); return 0; } @@ -1258,9 +1278,9 @@ int snd_hda_query_supported_pcm(struct hda_codec *codec, hda_nid_t nid, if (ratesp) { u32 rates = 0; - for (i = 0; rate_bits[i][0]; i++) { + for (i = 0; rate_bits[i].hz; i++) { if (val & (1 << i)) - rates |= rate_bits[i][1]; + rates |= rate_bits[i].alsa_bits; } *ratesp = rates; } @@ -1352,13 +1372,13 @@ int snd_hda_is_supported_format(struct hda_codec *codec, hda_nid_t nid, } rate = format & 0xff00; - for (i = 0; rate_bits[i][0]; i++) - if (rate_bits[i][2] == rate) { + for (i = 0; rate_bits[i].hz; i++) + if (rate_bits[i].hda_fmt == rate) { if (val & (1 << i)) break; return 0; } - if (! rate_bits[i][0]) + if (! rate_bits[i].hz) return 0; stream = snd_hda_param_read(codec, nid, AC_PAR_STREAM); @@ -1541,8 +1561,11 @@ int snd_hda_check_board_config(struct hda_codec *codec, const struct hda_board_c for (c = tbl; c->modelname || c->pci_subvendor; c++) { if (c->pci_subvendor == subsystem_vendor && (! c->pci_subdevice /* all match */|| - (c->pci_subdevice == subsystem_device))) + (c->pci_subdevice == subsystem_device))) { + snd_printdd(KERN_INFO "hda_codec: PCI %x:%x, codec config %d is selected\n", + subsystem_vendor, subsystem_device, c->config); return c->config; + } } } return -1; @@ -1803,11 +1826,25 @@ int snd_hda_parse_pin_def_config(struct hda_codec *codec, struct auto_pin_cfg *c cfg->line_out_pins[j] = nid; } - /* Swap surround and CLFE: the association order is front/CLFE/surr/back */ - if (cfg->line_outs >= 3) { + /* Reorder the surround channels + * ALSA sequence is front/surr/clfe/side + * HDA sequence is: + * 4-ch: front/surr => OK as it is + * 6-ch: front/clfe/surr + * 8-ch: front/clfe/side/surr + */ + switch (cfg->line_outs) { + case 3: nid = cfg->line_out_pins[1]; cfg->line_out_pins[1] = cfg->line_out_pins[2]; cfg->line_out_pins[2] = nid; + break; + case 4: + nid = cfg->line_out_pins[1]; + cfg->line_out_pins[1] = cfg->line_out_pins[3]; + cfg->line_out_pins[3] = cfg->line_out_pins[2]; + cfg->line_out_pins[2] = nid; + break; } return 0; diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h index dd0d99d2ad27..63a29a8a2860 100644 --- a/sound/pci/hda/hda_codec.h +++ b/sound/pci/hda/hda_codec.h @@ -514,6 +514,7 @@ struct hda_codec { struct list_head list; /* list point */ hda_nid_t afg; /* AFG node id */ + hda_nid_t mfg; /* MFG node id */ /* ids */ u32 vendor_id; diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c index 2d046abb5911..1229227af5b5 100644 --- a/sound/pci/hda/hda_generic.c +++ b/sound/pci/hda/hda_generic.c @@ -881,6 +881,11 @@ int snd_hda_parse_generic_codec(struct hda_codec *codec) struct hda_gspec *spec; int err; + if(!codec->afg) { + snd_printdd("hda_generic: no generic modem yet\n"); + return -ENODEV; + } + spec = kcalloc(1, sizeof(*spec), GFP_KERNEL); if (spec == NULL) { printk(KERN_ERR "hda_generic: can't allocate spec\n"); diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 288ab0764830..15107df1f490 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -71,7 +71,9 @@ MODULE_SUPPORTED_DEVICE("{{Intel, ICH6}," "{Intel, ESB2}," "{ATI, SB450}," "{VIA, VT8251}," - "{VIA, VT8237A}}"); + "{VIA, VT8237A}," + "{SiS, SIS966}," + "{ULI, M5461}}"); MODULE_DESCRIPTION("Intel HDA driver"); #define SFX "hda-intel: " @@ -141,9 +143,24 @@ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 }; */ /* max number of SDs */ -#define MAX_ICH6_DEV 8 +/* ICH, ATI and VIA have 4 playback and 4 capture */ +#define ICH6_CAPTURE_INDEX 0 +#define ICH6_NUM_CAPTURE 4 +#define ICH6_PLAYBACK_INDEX 4 +#define ICH6_NUM_PLAYBACK 4 + +/* ULI has 6 playback and 5 capture */ +#define ULI_CAPTURE_INDEX 0 +#define ULI_NUM_CAPTURE 5 +#define ULI_PLAYBACK_INDEX 5 +#define ULI_NUM_PLAYBACK 6 + +/* this number is statically defined for simplicity */ +#define MAX_AZX_DEV 16 + /* max number of fragments - we may use more if allocating more pages for BDL */ -#define AZX_MAX_FRAG (PAGE_SIZE / (MAX_ICH6_DEV * 16)) +#define BDL_SIZE PAGE_ALIGN(8192) +#define AZX_MAX_FRAG (BDL_SIZE / (MAX_AZX_DEV * 16)) /* max buffer size - no h/w limit, you can increase as you like */ #define AZX_MAX_BUF_SIZE (1024*1024*1024) /* max number of PCM devics per card */ @@ -200,7 +217,6 @@ enum { }; /* Defines for ATI HD Audio support in SB450 south bridge */ -#define ATI_SB450_HDAUDIO_PCI_DEVICE_ID 0x437b #define ATI_SB450_HDAUDIO_MISC_CNTR2_ADDR 0x42 #define ATI_SB450_HDAUDIO_ENABLE_SNOOP 0x02 @@ -258,6 +274,14 @@ struct snd_azx { snd_card_t *card; struct pci_dev *pci; + /* chip type specific */ + int driver_type; + int playback_streams; + int playback_index_offset; + int capture_streams; + int capture_index_offset; + int num_streams; + /* pci resources */ unsigned long addr; void __iomem *remap_addr; @@ -267,8 +291,8 @@ struct snd_azx { spinlock_t reg_lock; struct semaphore open_mutex; - /* streams */ - azx_dev_t azx_dev[MAX_ICH6_DEV]; + /* streams (x num_streams) */ + azx_dev_t *azx_dev; /* PCM */ unsigned int pcm_devs; @@ -292,6 +316,23 @@ struct snd_azx { unsigned int initialized: 1; }; +/* driver types */ +enum { + AZX_DRIVER_ICH, + AZX_DRIVER_ATI, + AZX_DRIVER_VIA, + AZX_DRIVER_SIS, + AZX_DRIVER_ULI, +}; + +static char *driver_short_names[] __devinitdata = { + [AZX_DRIVER_ICH] = "HDA Intel", + [AZX_DRIVER_ATI] = "HDA ATI SB", + [AZX_DRIVER_VIA] = "HDA VIA VT82xx", + [AZX_DRIVER_SIS] = "HDA SIS966", + [AZX_DRIVER_ULI] = "HDA ULI M5461" +}; + /* * macros for easy use */ @@ -360,6 +401,8 @@ static void azx_init_cmd_io(azx_t *chip) azx_writel(chip, CORBLBASE, (u32)chip->corb.addr); azx_writel(chip, CORBUBASE, upper_32bit(chip->corb.addr)); + /* set the corb size to 256 entries (ULI requires explicitly) */ + azx_writeb(chip, CORBSIZE, 0x02); /* set the corb write pointer to 0 */ azx_writew(chip, CORBWP, 0); /* reset the corb hw read pointer */ @@ -373,6 +416,8 @@ static void azx_init_cmd_io(azx_t *chip) azx_writel(chip, RIRBLBASE, (u32)chip->rirb.addr); azx_writel(chip, RIRBUBASE, upper_32bit(chip->rirb.addr)); + /* set the rirb size to 256 entries (ULI requires explicitly) */ + azx_writeb(chip, RIRBSIZE, 0x02); /* reset the rirb hw write pointer */ azx_writew(chip, RIRBWP, ICH6_RBRWP_CLR); /* set N=1, get RIRB response interrupt for new entry */ @@ -596,7 +641,7 @@ static void azx_int_disable(azx_t *chip) int i; /* disable interrupts in stream descriptor */ - for (i = 0; i < MAX_ICH6_DEV; i++) { + for (i = 0; i < chip->num_streams; i++) { azx_dev_t *azx_dev = &chip->azx_dev[i]; azx_sd_writeb(azx_dev, SD_CTL, azx_sd_readb(azx_dev, SD_CTL) & ~SD_INT_MASK); @@ -616,7 +661,7 @@ static void azx_int_clear(azx_t *chip) int i; /* clear stream status */ - for (i = 0; i < MAX_ICH6_DEV; i++) { + for (i = 0; i < chip->num_streams; i++) { azx_dev_t *azx_dev = &chip->azx_dev[i]; azx_sd_writeb(azx_dev, SD_STS, SD_INT_MASK); } @@ -686,8 +731,7 @@ static void azx_init_chip(azx_t *chip) } /* For ATI SB450 azalia HD audio, we need to enable snoop */ - if (chip->pci->vendor == PCI_VENDOR_ID_ATI && - chip->pci->device == ATI_SB450_HDAUDIO_PCI_DEVICE_ID) { + if (chip->driver_type == AZX_DRIVER_ATI) { pci_read_config_byte(chip->pci, ATI_SB450_HDAUDIO_MISC_CNTR2_ADDR, &ati_misc_cntl2); pci_write_config_byte(chip->pci, ATI_SB450_HDAUDIO_MISC_CNTR2_ADDR, @@ -714,7 +758,7 @@ static irqreturn_t azx_interrupt(int irq, void* dev_id, struct pt_regs *regs) return IRQ_NONE; } - for (i = 0; i < MAX_ICH6_DEV; i++) { + for (i = 0; i < chip->num_streams; i++) { azx_dev = &chip->azx_dev[i]; if (status & azx_dev->sd_int_sta_mask) { azx_sd_writeb(azx_dev, SD_STS, SD_INT_MASK); @@ -879,9 +923,15 @@ static int __devinit azx_codec_create(azx_t *chip, const char *model) /* assign a stream for the PCM */ static inline azx_dev_t *azx_assign_device(azx_t *chip, int stream) { - int dev, i; - dev = stream == SNDRV_PCM_STREAM_PLAYBACK ? 4 : 0; - for (i = 0; i < 4; i++, dev++) + int dev, i, nums; + if (stream == SNDRV_PCM_STREAM_PLAYBACK) { + dev = chip->playback_index_offset; + nums = chip->playback_streams; + } else { + dev = chip->capture_index_offset; + nums = chip->capture_streams; + } + for (i = 0; i < nums; i++, dev++) if (! chip->azx_dev[dev].opened) { chip->azx_dev[dev].opened = 1; return &chip->azx_dev[dev]; @@ -899,8 +949,8 @@ static snd_pcm_hardware_t azx_pcm_hw = { .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_PAUSE | - SNDRV_PCM_INFO_RESUME), + SNDRV_PCM_INFO_PAUSE /*|*/ + /*SNDRV_PCM_INFO_RESUME*/), .formats = SNDRV_PCM_FMTBIT_S16_LE, .rates = SNDRV_PCM_RATE_48000, .rate_min = 48000, @@ -1049,6 +1099,7 @@ static int azx_pcm_trigger(snd_pcm_substream_t *substream, int cmd) azx_dev->running = 1; break; case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + case SNDRV_PCM_TRIGGER_SUSPEND: case SNDRV_PCM_TRIGGER_STOP: azx_stream_stop(chip, azx_dev); azx_dev->running = 0; @@ -1058,6 +1109,7 @@ static int azx_pcm_trigger(snd_pcm_substream_t *substream, int cmd) } spin_unlock(&chip->reg_lock); if (cmd == SNDRV_PCM_TRIGGER_PAUSE_PUSH || + cmd == SNDRV_PCM_TRIGGER_SUSPEND || cmd == SNDRV_PCM_TRIGGER_STOP) { int timeout = 5000; while (azx_sd_readb(azx_dev, SD_CTL) & SD_CTL_DMA_START && --timeout) @@ -1136,6 +1188,7 @@ static int __devinit create_codec_pcm(azx_t *chip, struct hda_codec *codec, snd_dma_pci_data(chip->pci), 1024 * 64, 1024 * 128); chip->pcm[pcm_dev] = pcm; + chip->pcm_devs = pcm_dev + 1; return 0; } @@ -1186,7 +1239,7 @@ static int __devinit azx_init_stream(azx_t *chip) /* initialize each stream (aka device) * assign the starting bdl address to each stream (device) and initialize */ - for (i = 0; i < MAX_ICH6_DEV; i++) { + for (i = 0; i < chip->num_streams; i++) { unsigned int off = sizeof(u32) * (i * AZX_MAX_FRAG * 4); azx_dev_t *azx_dev = &chip->azx_dev[i]; azx_dev->bdl = (u32 *)(chip->bdl.area + off); @@ -1245,7 +1298,7 @@ static int azx_free(azx_t *chip) if (chip->initialized) { int i; - for (i = 0; i < MAX_ICH6_DEV; i++) + for (i = 0; i < chip->num_streams; i++) azx_stream_stop(chip, &chip->azx_dev[i]); /* disable interrupts */ @@ -1261,10 +1314,10 @@ static int azx_free(azx_t *chip) /* wait a little for interrupts to finish */ msleep(1); - - iounmap(chip->remap_addr); } + if (chip->remap_addr) + iounmap(chip->remap_addr); if (chip->irq >= 0) free_irq(chip->irq, (void*)chip); @@ -1276,6 +1329,7 @@ static int azx_free(azx_t *chip) snd_dma_free_pages(&chip->posbuf); pci_release_regions(chip->pci); pci_disable_device(chip->pci); + kfree(chip->azx_dev); kfree(chip); return 0; @@ -1290,7 +1344,8 @@ static int azx_dev_free(snd_device_t *device) * constructor */ static int __devinit azx_create(snd_card_t *card, struct pci_dev *pci, - int posfix, azx_t **rchip) + int posfix, int driver_type, + azx_t **rchip) { azx_t *chip; int err = 0; @@ -1316,9 +1371,20 @@ static int __devinit azx_create(snd_card_t *card, struct pci_dev *pci, chip->card = card; chip->pci = pci; chip->irq = -1; + chip->driver_type = driver_type; chip->position_fix = posfix; +#if BITS_PER_LONG != 64 + /* Fix up base address on ULI M5461 */ + if (chip->driver_type == AZX_DRIVER_ULI) { + u16 tmp3; + pci_read_config_word(pci, 0x40, &tmp3); + pci_write_config_word(pci, 0x40, tmp3 | 0x10); + pci_write_config_dword(pci, PCI_BASE_ADDRESS_1, 0); + } +#endif + if ((err = pci_request_regions(pci, "ICH HD audio")) < 0) { kfree(chip); pci_disable_device(pci); @@ -1344,16 +1410,37 @@ static int __devinit azx_create(snd_card_t *card, struct pci_dev *pci, pci_set_master(pci); synchronize_irq(chip->irq); + switch (chip->driver_type) { + case AZX_DRIVER_ULI: + chip->playback_streams = ULI_NUM_PLAYBACK; + chip->capture_streams = ULI_NUM_CAPTURE; + chip->playback_index_offset = ULI_PLAYBACK_INDEX; + chip->capture_index_offset = ULI_CAPTURE_INDEX; + break; + default: + chip->playback_streams = ICH6_NUM_PLAYBACK; + chip->capture_streams = ICH6_NUM_CAPTURE; + chip->playback_index_offset = ICH6_PLAYBACK_INDEX; + chip->capture_index_offset = ICH6_CAPTURE_INDEX; + break; + } + chip->num_streams = chip->playback_streams + chip->capture_streams; + chip->azx_dev = kcalloc(chip->num_streams, sizeof(*chip->azx_dev), GFP_KERNEL); + if (! chip->azx_dev) { + snd_printk(KERN_ERR "cannot malloc azx_dev\n"); + goto errout; + } + /* allocate memory for the BDL for each stream */ if ((err = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(chip->pci), - PAGE_SIZE, &chip->bdl)) < 0) { + BDL_SIZE, &chip->bdl)) < 0) { snd_printk(KERN_ERR SFX "cannot allocate BDL\n"); goto errout; } if (chip->position_fix == POS_FIX_POSBUF) { /* allocate memory for the position buffer */ if ((err = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(chip->pci), - MAX_ICH6_DEV * 8, &chip->posbuf)) < 0) { + chip->num_streams * 8, &chip->posbuf)) < 0) { snd_printk(KERN_ERR SFX "cannot allocate posbuf\n"); goto errout; } @@ -1382,6 +1469,10 @@ static int __devinit azx_create(snd_card_t *card, struct pci_dev *pci, goto errout; } + strcpy(card->driver, "HDA-Intel"); + strcpy(card->shortname, driver_short_names[chip->driver_type]); + sprintf(card->longname, "%s at 0x%lx irq %i", card->shortname, chip->addr, chip->irq); + *rchip = chip; return 0; @@ -1410,15 +1501,12 @@ static int __devinit azx_probe(struct pci_dev *pci, const struct pci_device_id * return -ENOMEM; } - if ((err = azx_create(card, pci, position_fix[dev], &chip)) < 0) { + if ((err = azx_create(card, pci, position_fix[dev], pci_id->driver_data, + &chip)) < 0) { snd_card_free(card); return err; } - strcpy(card->driver, "HDA-Intel"); - strcpy(card->shortname, "HDA Intel"); - sprintf(card->longname, "%s at 0x%lx irq %i", card->shortname, chip->addr, chip->irq); - /* create codec instances */ if ((err = azx_codec_create(chip, model[dev])) < 0) { snd_card_free(card); @@ -1459,12 +1547,13 @@ static void __devexit azx_remove(struct pci_dev *pci) /* PCI IDs */ static struct pci_device_id azx_ids[] = { - { 0x8086, 0x2668, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ICH6 */ - { 0x8086, 0x27d8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ICH7 */ - { 0x8086, 0x269a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ESB2 */ - { 0x1002, 0x437b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ATI SB450 */ - { 0x1106, 0x3288, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* VIA VT8251/VT8237A */ - { 0x10b9, 0x5461, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ALI 5461? */ + { 0x8086, 0x2668, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ICH }, /* ICH6 */ + { 0x8086, 0x27d8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ICH }, /* ICH7 */ + { 0x8086, 0x269a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ICH }, /* ESB2 */ + { 0x1002, 0x437b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ATI }, /* ATI SB450 */ + { 0x1106, 0x3288, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_VIA }, /* VIA VT8251/VT8237A */ + { 0x1039, 0x7502, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_SIS }, /* SIS966 */ + { 0x10b9, 0x5461, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ULI }, /* ULI M5461 */ { 0, } }; MODULE_DEVICE_TABLE(pci, azx_ids); diff --git a/sound/pci/hda/hda_patch.h b/sound/pci/hda/hda_patch.h index a5de684b6944..acaef3c811b8 100644 --- a/sound/pci/hda/hda_patch.h +++ b/sound/pci/hda/hda_patch.h @@ -10,11 +10,14 @@ extern struct hda_codec_preset snd_hda_preset_cmedia[]; extern struct hda_codec_preset snd_hda_preset_analog[]; /* SigmaTel codecs */ extern struct hda_codec_preset snd_hda_preset_sigmatel[]; +/* SiLabs 3054/3055 modem codecs */ +extern struct hda_codec_preset snd_hda_preset_si3054[]; static const struct hda_codec_preset *hda_preset_tables[] = { snd_hda_preset_realtek, snd_hda_preset_cmedia, snd_hda_preset_analog, snd_hda_preset_sigmatel, + snd_hda_preset_si3054, NULL }; diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index 2fd05bb84136..bceb83a42a38 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -572,7 +572,7 @@ static snd_kcontrol_new_t ad1983_mixers[] = { }, { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "IEC958 Playback Route", + .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,NONE) "Route", .info = ad1983_spdif_route_info, .get = ad1983_spdif_route_get, .put = ad1983_spdif_route_put, @@ -705,7 +705,7 @@ static snd_kcontrol_new_t ad1981_mixers[] = { /* identical with AD1983 */ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "IEC958 Playback Route", + .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,NONE) "Route", .info = ad1983_spdif_route_info, .get = ad1983_spdif_route_get, .put = ad1983_spdif_route_put, diff --git a/sound/pci/hda/patch_cmedia.c b/sound/pci/hda/patch_cmedia.c index 86f195f19eef..07fb4f5a54b3 100644 --- a/sound/pci/hda/patch_cmedia.c +++ b/sound/pci/hda/patch_cmedia.c @@ -647,6 +647,7 @@ static struct hda_board_config cmi9880_cfg_tbl[] = { { .modelname = "min_fp", .config = CMI_MIN_FP }, { .modelname = "full", .config = CMI_FULL }, { .modelname = "full_dig", .config = CMI_FULL_DIG }, + { .pci_subvendor = 0x1043, .pci_subdevice = 0x813d, .config = CMI_FULL_DIG }, /* ASUS P5AD2 */ { .modelname = "allout", .config = CMI_ALLOUT }, { .modelname = "auto", .config = CMI_AUTO }, {} /* terminator */ diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 9b8569900787..eeb900ab79af 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -687,6 +687,12 @@ static snd_kcontrol_new_t alc880_asus_w1v_mixer[] = { { } /* end */ }; +/* additional mixers to alc880_asus_mixer */ +static snd_kcontrol_new_t alc880_pcbeep_mixer[] = { + HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT), + HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT), + { } /* end */ +}; /* * build control elements @@ -1524,6 +1530,7 @@ static struct hda_board_config alc880_cfg_tbl[] = { /* Back 3 jack plus 1 SPDIF out jack, front 2 jack */ { .modelname = "3stack-digout", .config = ALC880_3ST_DIG }, { .pci_subvendor = 0x8086, .pci_subdevice = 0xe308, .config = ALC880_3ST_DIG }, + { .pci_subvendor = 0x1025, .pci_subdevice = 0x0070, .config = ALC880_3ST_DIG }, /* Back 3 jack plus 1 SPDIF out jack, front 2 jack (Internal add Aux-In)*/ { .pci_subvendor = 0x8086, .pci_subdevice = 0xe305, .config = ALC880_3ST_DIG }, @@ -1734,7 +1741,7 @@ static struct alc_config_preset alc880_presets[] = { .input_mux = &alc880_capture_source, }, [ALC880_UNIWILL_DIG] = { - .mixers = { alc880_asus_mixer }, + .mixers = { alc880_asus_mixer, alc880_pcbeep_mixer }, .init_verbs = { alc880_volume_init_verbs, alc880_pin_asus_init_verbs }, .num_dacs = ARRAY_SIZE(alc880_asus_dac_nids), .dac_nids = alc880_asus_dac_nids, diff --git a/sound/pci/hda/patch_si3054.c b/sound/pci/hda/patch_si3054.c new file mode 100644 index 000000000000..b0270d1b64ce --- /dev/null +++ b/sound/pci/hda/patch_si3054.c @@ -0,0 +1,300 @@ +/* + * Universal Interface for Intel High Definition Audio Codec + * + * HD audio interface patch for Silicon Labs 3054/5 modem codec + * + * Copyright (c) 2005 Sasha Khapyorsky <sashak@smlink.com> + * Takashi Iwai <tiwai@suse.de> + * + * + * This driver is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <sound/driver.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/pci.h> +#include <sound/core.h> +#include "hda_codec.h" +#include "hda_local.h" + + +/* si3054 verbs */ +#define SI3054_VERB_READ_NODE 0x900 +#define SI3054_VERB_WRITE_NODE 0x100 + +/* si3054 nodes (registers) */ +#define SI3054_EXTENDED_MID 2 +#define SI3054_LINE_RATE 3 +#define SI3054_LINE_LEVEL 4 +#define SI3054_GPIO_CFG 5 +#define SI3054_GPIO_POLARITY 6 +#define SI3054_GPIO_STICKY 7 +#define SI3054_GPIO_WAKEUP 8 +#define SI3054_GPIO_STATUS 9 +#define SI3054_GPIO_CONTROL 10 +#define SI3054_MISC_AFE 11 +#define SI3054_CHIPID 12 +#define SI3054_LINE_CFG1 13 +#define SI3054_LINE_STATUS 14 +#define SI3054_DC_TERMINATION 15 +#define SI3054_LINE_CONFIG 16 +#define SI3054_CALLPROG_ATT 17 +#define SI3054_SQ_CONTROL 18 +#define SI3054_MISC_CONTROL 19 +#define SI3054_RING_CTRL1 20 +#define SI3054_RING_CTRL2 21 + +/* extended MID */ +#define SI3054_MEI_READY 0xf + +/* line level */ +#define SI3054_ATAG_MASK 0x00f0 +#define SI3054_DTAG_MASK 0xf000 + +/* GPIO bits */ +#define SI3054_GPIO_OH 0x0001 +#define SI3054_GPIO_CID 0x0002 + +/* chipid and revisions */ +#define SI3054_CHIPID_CODEC_REV_MASK 0x000f +#define SI3054_CHIPID_DAA_REV_MASK 0x00f0 +#define SI3054_CHIPID_INTERNATIONAL 0x0100 +#define SI3054_CHIPID_DAA_ID 0x0f00 +#define SI3054_CHIPID_CODEC_ID (1<<12) + +/* si3054 codec registers (nodes) access macros */ +#define GET_REG(codec,reg) (snd_hda_codec_read(codec,reg,0,SI3054_VERB_READ_NODE,0)) +#define SET_REG(codec,reg,val) (snd_hda_codec_write(codec,reg,0,SI3054_VERB_WRITE_NODE,val)) + + +struct si3054_spec { + unsigned international; + struct hda_pcm pcm; +}; + + +/* + * Modem mixer + */ + +#define PRIVATE_VALUE(reg,mask) ((reg<<16)|(mask&0xffff)) +#define PRIVATE_REG(val) ((val>>16)&0xffff) +#define PRIVATE_MASK(val) (val&0xffff) + +static int si3054_switch_info(snd_kcontrol_t *kcontrol, + snd_ctl_elem_info_t *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 1; + return 0; +} + +static int si3054_switch_get(snd_kcontrol_t *kcontrol, + snd_ctl_elem_value_t *uvalue) +{ + struct hda_codec *codec = snd_kcontrol_chip(kcontrol); + u16 reg = PRIVATE_REG(kcontrol->private_value); + u16 mask = PRIVATE_MASK(kcontrol->private_value); + uvalue->value.integer.value[0] = (GET_REG(codec, reg)) & mask ? 1 : 0 ; + return 0; +} + +static int si3054_switch_put(snd_kcontrol_t *kcontrol, + snd_ctl_elem_value_t *uvalue) +{ + struct hda_codec *codec = snd_kcontrol_chip(kcontrol); + u16 reg = PRIVATE_REG(kcontrol->private_value); + u16 mask = PRIVATE_MASK(kcontrol->private_value); + if (uvalue->value.integer.value[0]) + SET_REG(codec, reg, (GET_REG(codec, reg)) | mask); + else + SET_REG(codec, reg, (GET_REG(codec, reg)) & ~mask); + return 0; +} + +#define SI3054_KCONTROL(kname,reg,mask) { \ + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ + .name = kname, \ + .info = si3054_switch_info, \ + .get = si3054_switch_get, \ + .put = si3054_switch_put, \ + .private_value = PRIVATE_VALUE(reg,mask), \ +} + + +static snd_kcontrol_new_t si3054_modem_mixer[] = { + SI3054_KCONTROL("Off-hook Switch", SI3054_GPIO_CONTROL, SI3054_GPIO_OH), + SI3054_KCONTROL("Caller ID Switch", SI3054_GPIO_CONTROL, SI3054_GPIO_CID), + {} +}; + +static int si3054_build_controls(struct hda_codec *codec) +{ + return snd_hda_add_new_ctls(codec, si3054_modem_mixer); +} + + +/* + * PCM callbacks + */ + +static int si3054_pcm_prepare(struct hda_pcm_stream *hinfo, + struct hda_codec *codec, + unsigned int stream_tag, + unsigned int format, + snd_pcm_substream_t *substream) +{ + u16 val; + + SET_REG(codec, SI3054_LINE_RATE, substream->runtime->rate); + val = GET_REG(codec, SI3054_LINE_LEVEL); + val &= 0xff << (8 * (substream->stream != SNDRV_PCM_STREAM_PLAYBACK)); + val |= ((stream_tag & 0xf) << 4) << (8 * (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)); + SET_REG(codec, SI3054_LINE_LEVEL, val); + + snd_hda_codec_setup_stream(codec, hinfo->nid, + stream_tag, 0, format); + return 0; +} + +static int si3054_pcm_open(struct hda_pcm_stream *hinfo, + struct hda_codec *codec, + snd_pcm_substream_t *substream) +{ + static unsigned int rates[] = { 8000, 9600, 16000 }; + static snd_pcm_hw_constraint_list_t hw_constraints_rates = { + .count = ARRAY_SIZE(rates), + .list = rates, + .mask = 0, + }; + substream->runtime->hw.period_bytes_min = 80; + return snd_pcm_hw_constraint_list(substream->runtime, 0, + SNDRV_PCM_HW_PARAM_RATE, &hw_constraints_rates); +} + + +static struct hda_pcm_stream si3054_pcm = { + .substreams = 1, + .channels_min = 1, + .channels_max = 1, + .nid = 0x1, + .rates = SNDRV_PCM_RATE_8000|SNDRV_PCM_RATE_16000|SNDRV_PCM_RATE_KNOT, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + .maxbps = 16, + .ops = { + .open = si3054_pcm_open, + .prepare = si3054_pcm_prepare, + }, +}; + + +static int si3054_build_pcms(struct hda_codec *codec) +{ + struct si3054_spec *spec = codec->spec; + struct hda_pcm *info = &spec->pcm; + si3054_pcm.nid = codec->mfg; + codec->num_pcms = 1; + codec->pcm_info = info; + info->name = "Si3054 Modem"; + info->stream[SNDRV_PCM_STREAM_PLAYBACK] = si3054_pcm; + info->stream[SNDRV_PCM_STREAM_CAPTURE] = si3054_pcm; + return 0; +} + + +/* + * Init part + */ + +static int si3054_init(struct hda_codec *codec) +{ + struct si3054_spec *spec = codec->spec; + unsigned wait_count; + u16 val; + + snd_hda_codec_write(codec, AC_NODE_ROOT, 0, AC_VERB_SET_CODEC_RESET, 0); + snd_hda_codec_write(codec, codec->mfg, 0, AC_VERB_SET_STREAM_FORMAT, 0); + SET_REG(codec, SI3054_LINE_RATE, 9600); + SET_REG(codec, SI3054_LINE_LEVEL, SI3054_DTAG_MASK|SI3054_ATAG_MASK); + SET_REG(codec, SI3054_EXTENDED_MID, 0); + + wait_count = 10; + do { + msleep(2); + val = GET_REG(codec, SI3054_EXTENDED_MID); + } while ((val & SI3054_MEI_READY) != SI3054_MEI_READY && wait_count--); + + if((val&SI3054_MEI_READY) != SI3054_MEI_READY) { + snd_printk(KERN_ERR "si3054: cannot initialize. EXT MID = %04x\n", val); + return -EACCES; + } + + SET_REG(codec, SI3054_GPIO_POLARITY, 0xffff); + SET_REG(codec, SI3054_GPIO_CFG, 0x0); + SET_REG(codec, SI3054_MISC_AFE, 0); + SET_REG(codec, SI3054_LINE_CFG1,0x200); + + if((GET_REG(codec,SI3054_LINE_STATUS) & (1<<6)) == 0) { + snd_printd("Link Frame Detect(FDT) is not ready (line status: %04x)\n", + GET_REG(codec,SI3054_LINE_STATUS)); + } + + spec->international = GET_REG(codec, SI3054_CHIPID) & SI3054_CHIPID_INTERNATIONAL; + + return 0; +} + +static void si3054_free(struct hda_codec *codec) +{ + kfree(codec->spec); +} + + +/* + */ + +static struct hda_codec_ops si3054_patch_ops = { + .build_controls = si3054_build_controls, + .build_pcms = si3054_build_pcms, + .init = si3054_init, + .free = si3054_free, +#ifdef CONFIG_PM + //.suspend = si3054_suspend, + .resume = si3054_init, +#endif +}; + +static int patch_si3054(struct hda_codec *codec) +{ + struct si3054_spec *spec = kcalloc(1, sizeof(*spec), GFP_KERNEL); + if (spec == NULL) + return -ENOMEM; + codec->spec = spec; + codec->patch_ops = si3054_patch_ops; + return 0; +} + +/* + * patch entries + */ +struct hda_codec_preset snd_hda_preset_si3054[] = { + { .id = 0x163c3155, .name = "Si3054", .patch = patch_si3054 }, + {} +}; + diff --git a/sound/pci/ice1712/delta.c b/sound/pci/ice1712/delta.c index eb20f73be61a..39fbe662965d 100644 --- a/sound/pci/ice1712/delta.c +++ b/sound/pci/ice1712/delta.c @@ -618,15 +618,15 @@ static int __devinit snd_ice1712_delta_init(ice1712_t *ice) */ static snd_kcontrol_new_t snd_ice1712_delta1010_wordclock_select __devinitdata = -ICE1712_GPIO(SNDRV_CTL_ELEM_IFACE_PCM, "Word Clock Sync", 0, ICE1712_DELTA_WORD_CLOCK_SELECT, 1, 0); +ICE1712_GPIO(SNDRV_CTL_ELEM_IFACE_MIXER, "Word Clock Sync", 0, ICE1712_DELTA_WORD_CLOCK_SELECT, 1, 0); static snd_kcontrol_new_t snd_ice1712_delta1010lt_wordclock_select __devinitdata = -ICE1712_GPIO(SNDRV_CTL_ELEM_IFACE_PCM, "Word Clock Sync", 0, ICE1712_DELTA_1010LT_WORDCLOCK, 1, 0); +ICE1712_GPIO(SNDRV_CTL_ELEM_IFACE_MIXER, "Word Clock Sync", 0, ICE1712_DELTA_1010LT_WORDCLOCK, 1, 0); static snd_kcontrol_new_t snd_ice1712_delta1010_wordclock_status __devinitdata = -ICE1712_GPIO(SNDRV_CTL_ELEM_IFACE_PCM, "Word Clock Status", 0, ICE1712_DELTA_WORD_CLOCK_STATUS, 1, SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE); +ICE1712_GPIO(SNDRV_CTL_ELEM_IFACE_MIXER, "Word Clock Status", 0, ICE1712_DELTA_WORD_CLOCK_STATUS, 1, SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE); static snd_kcontrol_new_t snd_ice1712_deltadio2496_spdif_in_select __devinitdata = -ICE1712_GPIO(SNDRV_CTL_ELEM_IFACE_PCM, "IEC958 Input Optical", 0, ICE1712_DELTA_SPDIF_INPUT_SELECT, 0, 0); +ICE1712_GPIO(SNDRV_CTL_ELEM_IFACE_MIXER, "IEC958 Input Optical", 0, ICE1712_DELTA_SPDIF_INPUT_SELECT, 0, 0); static snd_kcontrol_new_t snd_ice1712_delta_spdif_in_status __devinitdata = -ICE1712_GPIO(SNDRV_CTL_ELEM_IFACE_PCM, "Delta IEC958 Input Status", 0, ICE1712_DELTA_SPDIF_IN_STAT, 1, SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE); +ICE1712_GPIO(SNDRV_CTL_ELEM_IFACE_MIXER, "Delta IEC958 Input Status", 0, ICE1712_DELTA_SPDIF_IN_STAT, 1, SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE); static int __devinit snd_ice1712_delta_add_controls(ice1712_t *ice) diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c index a2545a5b26c4..b97f50d10ba3 100644 --- a/sound/pci/ice1712/ice1712.c +++ b/sound/pci/ice1712/ice1712.c @@ -1422,7 +1422,7 @@ static snd_kcontrol_new_t snd_ice1712_multi_capture_analog_switch __devinitdata static snd_kcontrol_new_t snd_ice1712_multi_capture_spdif_switch __devinitdata = { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "IEC958 Multi Capture Switch", + .name = SNDRV_CTL_NAME_IEC958("Multi ",CAPTURE,SWITCH), .info = snd_ice1712_pro_mixer_switch_info, .get = snd_ice1712_pro_mixer_switch_get, .put = snd_ice1712_pro_mixer_switch_put, @@ -1441,7 +1441,7 @@ static snd_kcontrol_new_t snd_ice1712_multi_capture_analog_volume __devinitdata static snd_kcontrol_new_t snd_ice1712_multi_capture_spdif_volume __devinitdata = { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "IEC958 Multi Capture Volume", + .name = SNDRV_CTL_NAME_IEC958("Multi ",CAPTURE,VOLUME), .info = snd_ice1712_pro_mixer_volume_info, .get = snd_ice1712_pro_mixer_volume_get, .put = snd_ice1712_pro_mixer_volume_put, @@ -1715,7 +1715,7 @@ static int snd_ice1712_spdif_maskp_get(snd_kcontrol_t * kcontrol, static snd_kcontrol_new_t snd_ice1712_spdif_maskc __devinitdata = { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,CON_MASK), .info = snd_ice1712_spdif_info, .get = snd_ice1712_spdif_maskc_get, @@ -1724,7 +1724,7 @@ static snd_kcontrol_new_t snd_ice1712_spdif_maskc __devinitdata = static snd_kcontrol_new_t snd_ice1712_spdif_maskp __devinitdata = { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,PRO_MASK), .info = snd_ice1712_spdif_info, .get = snd_ice1712_spdif_maskp_get, @@ -2203,7 +2203,7 @@ static snd_kcontrol_new_t snd_ice1712_mixer_pro_analog_route __devinitdata = { static snd_kcontrol_new_t snd_ice1712_mixer_pro_spdif_route __devinitdata = { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "IEC958 Playback Route", + .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,NONE) "Route", .info = snd_ice1712_pro_route_info, .get = snd_ice1712_pro_route_spdif_get, .put = snd_ice1712_pro_route_spdif_put, diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c index 79b5f12e06fc..c7af5e5fee13 100644 --- a/sound/pci/ice1712/ice1724.c +++ b/sound/pci/ice1712/ice1724.c @@ -1414,7 +1414,7 @@ static int snd_vt1724_spdif_maskp_get(snd_kcontrol_t * kcontrol, static snd_kcontrol_new_t snd_vt1724_spdif_maskc __devinitdata = { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,CON_MASK), .info = snd_vt1724_spdif_info, .get = snd_vt1724_spdif_maskc_get, @@ -1423,7 +1423,7 @@ static snd_kcontrol_new_t snd_vt1724_spdif_maskc __devinitdata = static snd_kcontrol_new_t snd_vt1724_spdif_maskp __devinitdata = { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,PRO_MASK), .info = snd_vt1724_spdif_info, .get = snd_vt1724_spdif_maskp_get, @@ -1466,7 +1466,7 @@ static snd_kcontrol_new_t snd_vt1724_spdif_switch __devinitdata = .iface = SNDRV_CTL_ELEM_IFACE_MIXER, /* FIXME: the following conflict with IEC958 Playback Route */ // .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,SWITCH), - .name = "IEC958 Output Switch", + .name = SNDRV_CTL_NAME_IEC958("Output ",NONE,SWITCH), .info = snd_vt1724_spdif_sw_info, .get = snd_vt1724_spdif_sw_get, .put = snd_vt1724_spdif_sw_put diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c index d7af3e474432..7b548416dcef 100644 --- a/sound/pci/intel8x0.c +++ b/sound/pci/intel8x0.c @@ -389,6 +389,7 @@ typedef struct { struct ac97_pcm *pcm; int pcm_open_flag; unsigned int page_attr_changed: 1; + unsigned int suspended: 1; } ichdev_t; typedef struct _snd_intel8x0 intel8x0_t; @@ -862,12 +863,16 @@ static int snd_intel8x0_pcm_trigger(snd_pcm_substream_t *substream, int cmd) unsigned long port = ichdev->reg_offset; switch (cmd) { - case SNDRV_PCM_TRIGGER_START: case SNDRV_PCM_TRIGGER_RESUME: + ichdev->suspended = 0; + /* fallthru */ + case SNDRV_PCM_TRIGGER_START: val = ICH_IOCE | ICH_STARTBM; break; - case SNDRV_PCM_TRIGGER_STOP: case SNDRV_PCM_TRIGGER_SUSPEND: + ichdev->suspended = 1; + /* fallthru */ + case SNDRV_PCM_TRIGGER_STOP: val = 0; break; case SNDRV_PCM_TRIGGER_PAUSE_PUSH: @@ -899,9 +904,11 @@ static int snd_intel8x0_ali_trigger(snd_pcm_substream_t *substream, int cmd) val = igetdword(chip, ICHREG(ALI_DMACR)); switch (cmd) { + case SNDRV_PCM_TRIGGER_RESUME: + ichdev->suspended = 0; + /* fallthru */ case SNDRV_PCM_TRIGGER_START: case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - case SNDRV_PCM_TRIGGER_RESUME: if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { /* clear FIFO for synchronization of channels */ fifo = igetdword(chip, fiforeg[ichdev->ali_slot / 4]); @@ -913,9 +920,11 @@ static int snd_intel8x0_ali_trigger(snd_pcm_substream_t *substream, int cmd) val &= ~(1 << (ichdev->ali_slot + 16)); /* clear PAUSE flag */ iputdword(chip, ICHREG(ALI_DMACR), val | (1 << ichdev->ali_slot)); /* start DMA */ break; + case SNDRV_PCM_TRIGGER_SUSPEND: + ichdev->suspended = 1; + /* fallthru */ case SNDRV_PCM_TRIGGER_STOP: case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - case SNDRV_PCM_TRIGGER_SUSPEND: iputdword(chip, ICHREG(ALI_DMACR), val | (1 << (ichdev->ali_slot + 16))); /* pause */ iputbyte(chip, port + ICH_REG_OFF_CR, 0); while (igetbyte(chip, port + ICH_REG_OFF_CR)) @@ -994,6 +1003,8 @@ static void snd_intel8x0_setup_pcm_out(intel8x0_t *chip, { unsigned int cnt; int dbl = runtime->rate > 48000; + + spin_lock_irq(&chip->reg_lock); switch (chip->device_type) { case DEVICE_ALI: cnt = igetdword(chip, ICHREG(ALI_SCR)); @@ -1037,6 +1048,7 @@ static void snd_intel8x0_setup_pcm_out(intel8x0_t *chip, iputdword(chip, ICHREG(GLOB_CNT), cnt); break; } + spin_unlock_irq(&chip->reg_lock); } static int snd_intel8x0_pcm_prepare(snd_pcm_substream_t * substream) @@ -1048,15 +1060,12 @@ static int snd_intel8x0_pcm_prepare(snd_pcm_substream_t * substream) ichdev->physbuf = runtime->dma_addr; ichdev->size = snd_pcm_lib_buffer_bytes(substream); ichdev->fragsize = snd_pcm_lib_period_bytes(substream); - spin_lock_irq(&chip->reg_lock); if (ichdev->ichd == ICHD_PCMOUT) { snd_intel8x0_setup_pcm_out(chip, runtime); - if (chip->device_type == DEVICE_INTEL_ICH4) { + if (chip->device_type == DEVICE_INTEL_ICH4) ichdev->pos_shift = (runtime->sample_bits > 16) ? 2 : 1; - } } snd_intel8x0_setup_periods(chip, ichdev); - spin_unlock_irq(&chip->reg_lock); return 0; } @@ -1817,6 +1826,18 @@ static struct ac97_quirk ac97_quirks[] __devinitdata = { }, { .subvendor = 0x103c, + .subdevice = 0x0934, + .name = "HP nx8220", + .type = AC97_TUNE_MUTE_LED + }, + { + .subvendor = 0x103c, + .subdevice = 0x099c, + .name = "HP nx6110", /* AD1981B */ + .type = AC97_TUNE_HP_ONLY + }, + { + .subvendor = 0x103c, .subdevice = 0x129d, .name = "HP xw8000", .type = AC97_TUNE_HP_ONLY @@ -1870,6 +1891,12 @@ static struct ac97_quirk ac97_quirks[] __devinitdata = { .type = AC97_TUNE_HP_ONLY }, { + .subvendor = 0x10cf, + .subdevice = 0x12ec, + .name = "Fujitsu-Siemens 4010", + .type = AC97_TUNE_HP_ONLY + }, + { .subvendor = 0x10f1, .subdevice = 0x2665, .name = "Fujitsu-Siemens Celsius", /* AD1981? */ @@ -2424,6 +2451,20 @@ static int intel8x0_resume(snd_card_t *card) } } + /* resume status */ + for (i = 0; i < chip->bdbars_count; i++) { + ichdev_t *ichdev = &chip->ichd[i]; + unsigned long port = ichdev->reg_offset; + if (! ichdev->substream || ! ichdev->suspended) + continue; + if (ichdev->ichd == ICHD_PCMOUT) + snd_intel8x0_setup_pcm_out(chip, ichdev->substream->runtime); + iputdword(chip, port + ICH_REG_OFF_BDBAR, ichdev->bdbar_addr); + iputbyte(chip, port + ICH_REG_OFF_LVI, ichdev->lvi); + iputbyte(chip, port + ICH_REG_OFF_CIV, ichdev->civ); + iputbyte(chip, port + ichdev->roff_sr, ICH_FIFOE | ICH_BCIS | ICH_LVBCI); + } + return 0; } #endif /* CONFIG_PM */ diff --git a/sound/pci/korg1212/korg1212.c b/sound/pci/korg1212/korg1212.c index 79d8eda54f0d..d2aa9c82d41e 100644 --- a/sound/pci/korg1212/korg1212.c +++ b/sound/pci/korg1212/korg1212.c @@ -2067,7 +2067,7 @@ static int snd_korg1212_control_sync_put(snd_kcontrol_t * kcontrol, snd_ctl_elem }, \ { \ .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_WRITE, \ - .iface = SNDRV_CTL_ELEM_IFACE_PCM, \ + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = c_name " Monitor Phase Invert", \ .info = snd_korg1212_control_phase_info, \ .get = snd_korg1212_control_phase_get, \ @@ -2082,7 +2082,7 @@ static snd_kcontrol_new_t snd_korg1212_controls[] = { MON_MIXER(4, "ADAT-5"), MON_MIXER(5, "ADAT-6"), MON_MIXER(6, "ADAT-7"), MON_MIXER(7, "ADAT-8"), { .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_WRITE, - .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Sync Source", .info = snd_korg1212_control_sync_info, .get = snd_korg1212_control_sync_get, diff --git a/sound/pci/nm256/nm256.c b/sound/pci/nm256/nm256.c index 7eb20b8f89f6..2bbeb10ff7c4 100644 --- a/sound/pci/nm256/nm256.c +++ b/sound/pci/nm256/nm256.c @@ -189,6 +189,7 @@ struct snd_nm256_stream { nm256_t *chip; snd_pcm_substream_t *substream; int running; + int suspended; u32 buf; /* offset from chip->buffer */ int bufsize; /* buffer size in bytes */ @@ -231,8 +232,10 @@ struct snd_nm256 { int mixer_status_mask; /* bit mask to test the mixer status */ int irq; + int irq_acks; irqreturn_t (*interrupt)(int, void *, struct pt_regs *); int badintrcount; /* counter to check bogus interrupts */ + struct semaphore irq_mutex; nm256_stream_t streams[2]; @@ -464,6 +467,37 @@ snd_nm256_set_format(nm256_t *chip, nm256_stream_t *s, snd_pcm_substream_t *subs } } +/* acquire interrupt */ +static int snd_nm256_acquire_irq(nm256_t *chip) +{ + down(&chip->irq_mutex); + if (chip->irq < 0) { + if (request_irq(chip->pci->irq, chip->interrupt, SA_INTERRUPT|SA_SHIRQ, + chip->card->driver, (void*)chip)) { + snd_printk("unable to grab IRQ %d\n", chip->pci->irq); + up(&chip->irq_mutex); + return -EBUSY; + } + chip->irq = chip->pci->irq; + } + chip->irq_acks++; + up(&chip->irq_mutex); + return 0; +} + +/* release interrupt */ +static void snd_nm256_release_irq(nm256_t *chip) +{ + down(&chip->irq_mutex); + if (chip->irq_acks > 0) + chip->irq_acks--; + if (chip->irq_acks == 0 && chip->irq >= 0) { + free_irq(chip->irq, (void*)chip); + chip->irq = -1; + } + up(&chip->irq_mutex); +} + /* * start / stop */ @@ -538,15 +572,19 @@ snd_nm256_playback_trigger(snd_pcm_substream_t *substream, int cmd) spin_lock(&chip->reg_lock); switch (cmd) { - case SNDRV_PCM_TRIGGER_START: case SNDRV_PCM_TRIGGER_RESUME: + s->suspended = 0; + /* fallthru */ + case SNDRV_PCM_TRIGGER_START: if (! s->running) { snd_nm256_playback_start(chip, s, substream); s->running = 1; } break; - case SNDRV_PCM_TRIGGER_STOP: case SNDRV_PCM_TRIGGER_SUSPEND: + s->suspended = 1; + /* fallthru */ + case SNDRV_PCM_TRIGGER_STOP: if (s->running) { snd_nm256_playback_stop(chip); s->running = 0; @@ -818,6 +856,8 @@ snd_nm256_playback_open(snd_pcm_substream_t *substream) { nm256_t *chip = snd_pcm_substream_chip(substream); + if (snd_nm256_acquire_irq(chip) < 0) + return -EBUSY; snd_nm256_setup_stream(chip, &chip->streams[SNDRV_PCM_STREAM_PLAYBACK], substream, &snd_nm256_playback); return 0; @@ -828,6 +868,8 @@ snd_nm256_capture_open(snd_pcm_substream_t *substream) { nm256_t *chip = snd_pcm_substream_chip(substream); + if (snd_nm256_acquire_irq(chip) < 0) + return -EBUSY; snd_nm256_setup_stream(chip, &chip->streams[SNDRV_PCM_STREAM_CAPTURE], substream, &snd_nm256_capture); return 0; @@ -839,6 +881,9 @@ snd_nm256_capture_open(snd_pcm_substream_t *substream) static int snd_nm256_playback_close(snd_pcm_substream_t *substream) { + nm256_t *chip = snd_pcm_substream_chip(substream); + + snd_nm256_release_irq(chip); return 0; } @@ -846,6 +891,9 @@ snd_nm256_playback_close(snd_pcm_substream_t *substream) static int snd_nm256_capture_close(snd_pcm_substream_t *substream) { + nm256_t *chip = snd_pcm_substream_chip(substream); + + snd_nm256_release_irq(chip); return 0; } @@ -915,18 +963,16 @@ snd_nm256_pcm(nm256_t *chip, int device) static void snd_nm256_init_chip(nm256_t *chip) { - spin_lock_irq(&chip->reg_lock); /* Reset everything. */ snd_nm256_writeb(chip, 0x0, 0x11); snd_nm256_writew(chip, 0x214, 0); /* stop sounds.. */ //snd_nm256_playback_stop(chip); //snd_nm256_capture_stop(chip); - spin_unlock_irq(&chip->reg_lock); } -static inline void +static irqreturn_t snd_nm256_intr_check(nm256_t *chip) { if (chip->badintrcount++ > 1000) { @@ -947,7 +993,9 @@ snd_nm256_intr_check(nm256_t *chip) if (chip->streams[SNDRV_PCM_STREAM_CAPTURE].running) snd_nm256_capture_stop(chip); chip->badintrcount = 0; + return IRQ_HANDLED; } + return IRQ_NONE; } /* @@ -969,10 +1017,8 @@ snd_nm256_interrupt(int irq, void *dev_id, struct pt_regs *dummy) status = snd_nm256_readw(chip, NM_INT_REG); /* Not ours. */ - if (status == 0) { - snd_nm256_intr_check(chip); - return IRQ_NONE; - } + if (status == 0) + return snd_nm256_intr_check(chip); chip->badintrcount = 0; @@ -1036,10 +1082,8 @@ snd_nm256_interrupt_zx(int irq, void *dev_id, struct pt_regs *dummy) status = snd_nm256_readl(chip, NM_INT_REG); /* Not ours. */ - if (status == 0) { - snd_nm256_intr_check(chip); - return IRQ_NONE; - } + if (status == 0) + return snd_nm256_intr_check(chip); chip->badintrcount = 0; @@ -1192,7 +1236,7 @@ snd_nm256_mixer(nm256_t *chip) AC97_PC_BEEP, AC97_PHONE, AC97_MIC, AC97_LINE, AC97_CD, AC97_VIDEO, AC97_AUX, AC97_PCM, AC97_REC_SEL, AC97_REC_GAIN, AC97_GENERAL_PURPOSE, AC97_3D_CONTROL, - AC97_EXTENDED_ID, + /*AC97_EXTENDED_ID,*/ AC97_VENDOR_ID1, AC97_VENDOR_ID2, -1 }; @@ -1206,6 +1250,7 @@ snd_nm256_mixer(nm256_t *chip) for (i = 0; mixer_regs[i] >= 0; i++) set_bit(mixer_regs[i], ac97.reg_accessed); ac97.private_data = chip; + pbus->no_vra = 1; err = snd_ac97_mixer(pbus, &ac97, &chip->ac97); if (err < 0) return err; @@ -1281,6 +1326,7 @@ static int nm256_suspend(snd_card_t *card, pm_message_t state) static int nm256_resume(snd_card_t *card) { nm256_t *chip = card->pm_private_data; + int i; /* Perform a full reset on the hardware */ pci_enable_device(chip->pci); @@ -1289,6 +1335,15 @@ static int nm256_resume(snd_card_t *card) /* restore ac97 */ snd_ac97_resume(chip->ac97); + for (i = 0; i < 2; i++) { + nm256_stream_t *s = &chip->streams[i]; + if (s->substream && s->suspended) { + spin_lock_irq(&chip->reg_lock); + snd_nm256_set_format(chip, s, s->substream); + spin_unlock_irq(&chip->reg_lock); + } + } + return 0; } #endif /* CONFIG_PM */ @@ -1360,6 +1415,7 @@ snd_nm256_create(snd_card_t *card, struct pci_dev *pci, chip->use_cache = usecache; spin_lock_init(&chip->reg_lock); chip->irq = -1; + init_MUTEX(&chip->irq_mutex); chip->streams[SNDRV_PCM_STREAM_PLAYBACK].bufsize = play_bufsize; chip->streams[SNDRV_PCM_STREAM_CAPTURE].bufsize = capt_bufsize; @@ -1470,15 +1526,6 @@ snd_nm256_create(snd_card_t *card, struct pci_dev *pci, chip->coeff_buf[SNDRV_PCM_STREAM_CAPTURE] = addr; } - /* acquire interrupt */ - if (request_irq(pci->irq, chip->interrupt, SA_INTERRUPT|SA_SHIRQ, - card->driver, (void*)chip)) { - err = -EBUSY; - snd_printk("unable to grab IRQ %d\n", pci->irq); - goto __error; - } - chip->irq = pci->irq; - /* Fixed setting. */ chip->mixer_base = NM_MIXER_OFFSET; diff --git a/sound/pci/rme32.c b/sound/pci/rme32.c index b7b554df6705..456be39e8e4a 100644 --- a/sound/pci/rme32.c +++ b/sound/pci/rme32.c @@ -1900,7 +1900,7 @@ static snd_kcontrol_new_t snd_rme32_controls[] = { }, { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, CON_MASK), .info = snd_rme32_control_spdif_mask_info, .get = snd_rme32_control_spdif_mask_get, @@ -1908,7 +1908,7 @@ static snd_kcontrol_new_t snd_rme32_controls[] = { }, { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, PRO_MASK), .info = snd_rme32_control_spdif_mask_info, .get = snd_rme32_control_spdif_mask_get, diff --git a/sound/pci/rme96.c b/sound/pci/rme96.c index 10c4f45a913c..9645e9004a48 100644 --- a/sound/pci/rme96.c +++ b/sound/pci/rme96.c @@ -2266,7 +2266,7 @@ static snd_kcontrol_new_t snd_rme96_controls[] = { }, { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,CON_MASK), .info = snd_rme96_control_spdif_mask_info, .get = snd_rme96_control_spdif_mask_get, @@ -2276,7 +2276,7 @@ static snd_kcontrol_new_t snd_rme96_controls[] = { }, { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,PRO_MASK), .info = snd_rme96_control_spdif_mask_info, .get = snd_rme96_control_spdif_mask_get, diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c index 796621de5009..6694866089b5 100644 --- a/sound/pci/rme9652/hdsp.c +++ b/sound/pci/rme9652/hdsp.c @@ -1524,7 +1524,7 @@ static int snd_hdsp_control_spdif_mask_get(snd_kcontrol_t * kcontrol, snd_ctl_el } #define HDSP_SPDIF_IN(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_PCM, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .info = snd_hdsp_info_spdif_in, \ @@ -1584,7 +1584,7 @@ static int snd_hdsp_put_spdif_in(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t } #define HDSP_SPDIF_OUT(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, .name = xname, .index = xindex, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ .info = snd_hdsp_info_spdif_bits, \ .get = snd_hdsp_get_spdif_out, .put = snd_hdsp_put_spdif_out } @@ -1638,7 +1638,7 @@ static int snd_hdsp_put_spdif_out(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_ } #define HDSP_SPDIF_PROFESSIONAL(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, .name = xname, .index = xindex, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ .info = snd_hdsp_info_spdif_bits, \ .get = snd_hdsp_get_spdif_professional, .put = snd_hdsp_put_spdif_professional } @@ -1683,7 +1683,7 @@ static int snd_hdsp_put_spdif_professional(snd_kcontrol_t * kcontrol, snd_ctl_el } #define HDSP_SPDIF_EMPHASIS(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, .name = xname, .index = xindex, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ .info = snd_hdsp_info_spdif_bits, \ .get = snd_hdsp_get_spdif_emphasis, .put = snd_hdsp_put_spdif_emphasis } @@ -1728,7 +1728,7 @@ static int snd_hdsp_put_spdif_emphasis(snd_kcontrol_t * kcontrol, snd_ctl_elem_v } #define HDSP_SPDIF_NON_AUDIO(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, .name = xname, .index = xindex, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ .info = snd_hdsp_info_spdif_bits, \ .get = snd_hdsp_get_spdif_nonaudio, .put = snd_hdsp_put_spdif_nonaudio } @@ -1773,7 +1773,7 @@ static int snd_hdsp_put_spdif_nonaudio(snd_kcontrol_t * kcontrol, snd_ctl_elem_v } #define HDSP_SPDIF_SAMPLE_RATE(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READ, \ @@ -1834,7 +1834,7 @@ static int snd_hdsp_get_spdif_sample_rate(snd_kcontrol_t * kcontrol, snd_ctl_ele } #define HDSP_SYSTEM_SAMPLE_RATE(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READ, \ @@ -1858,7 +1858,7 @@ static int snd_hdsp_get_system_sample_rate(snd_kcontrol_t * kcontrol, snd_ctl_el } #define HDSP_AUTOSYNC_SAMPLE_RATE(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_PCM, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READ, \ @@ -1918,7 +1918,7 @@ static int snd_hdsp_get_autosync_sample_rate(snd_kcontrol_t * kcontrol, snd_ctl_ } #define HDSP_SYSTEM_CLOCK_MODE(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READ, \ @@ -1958,7 +1958,7 @@ static int snd_hdsp_get_system_clock_mode(snd_kcontrol_t * kcontrol, snd_ctl_ele } #define HDSP_CLOCK_SOURCE(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_PCM, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .info = snd_hdsp_info_clock_source, \ @@ -2124,7 +2124,7 @@ static int snd_hdsp_put_clock_source_lock(snd_kcontrol_t * kcontrol, snd_ctl_ele } #define HDSP_DA_GAIN(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .info = snd_hdsp_info_da_gain, \ @@ -2210,7 +2210,7 @@ static int snd_hdsp_put_da_gain(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t } #define HDSP_AD_GAIN(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .info = snd_hdsp_info_ad_gain, \ @@ -2296,7 +2296,7 @@ static int snd_hdsp_put_ad_gain(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t } #define HDSP_PHONE_GAIN(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .info = snd_hdsp_info_phone_gain, \ @@ -2382,7 +2382,7 @@ static int snd_hdsp_put_phone_gain(snd_kcontrol_t * kcontrol, snd_ctl_elem_value } #define HDSP_XLR_BREAKOUT_CABLE(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .info = snd_hdsp_info_xlr_breakout_cable, \ @@ -2447,7 +2447,7 @@ static int snd_hdsp_put_xlr_breakout_cable(snd_kcontrol_t * kcontrol, snd_ctl_el Switching this on desactivates external ADAT */ #define HDSP_AEB(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .info = snd_hdsp_info_aeb, \ @@ -2508,7 +2508,7 @@ static int snd_hdsp_put_aeb(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t * uc } #define HDSP_PREF_SYNC_REF(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .info = snd_hdsp_info_pref_sync_ref, \ @@ -2641,7 +2641,7 @@ static int snd_hdsp_put_pref_sync_ref(snd_kcontrol_t * kcontrol, snd_ctl_elem_va } #define HDSP_AUTOSYNC_REF(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READ, \ @@ -2697,7 +2697,7 @@ static int snd_hdsp_get_autosync_ref(snd_kcontrol_t * kcontrol, snd_ctl_elem_val } #define HDSP_LINE_OUT(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .info = snd_hdsp_info_line_out, \ @@ -2757,7 +2757,7 @@ static int snd_hdsp_put_line_out(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t } #define HDSP_PRECISE_POINTER(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_CARD, \ .name = xname, \ .index = xindex, \ .info = snd_hdsp_info_precise_pointer, \ @@ -2811,7 +2811,7 @@ static int snd_hdsp_put_precise_pointer(snd_kcontrol_t * kcontrol, snd_ctl_elem_ } #define HDSP_USE_MIDI_TASKLET(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_CARD, \ .name = xname, \ .index = xindex, \ .info = snd_hdsp_info_use_midi_tasklet, \ @@ -2868,6 +2868,7 @@ static int snd_hdsp_put_use_midi_tasklet(snd_kcontrol_t * kcontrol, snd_ctl_elem { .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ .name = xname, \ .index = xindex, \ + .device = 0, \ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | \ SNDRV_CTL_ELEM_ACCESS_VOLATILE, \ .info = snd_hdsp_info_mixer, \ @@ -2939,7 +2940,7 @@ static int snd_hdsp_put_mixer(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t * } #define HDSP_WC_SYNC_CHECK(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, \ @@ -2983,7 +2984,7 @@ static int snd_hdsp_get_wc_sync_check(snd_kcontrol_t * kcontrol, snd_ctl_elem_va } #define HDSP_SPDIF_SYNC_CHECK(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, \ @@ -3015,7 +3016,7 @@ static int snd_hdsp_get_spdif_sync_check(snd_kcontrol_t * kcontrol, snd_ctl_elem } #define HDSP_ADATSYNC_SYNC_CHECK(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, \ @@ -3046,7 +3047,7 @@ static int snd_hdsp_get_adatsync_sync_check(snd_kcontrol_t * kcontrol, snd_ctl_e } #define HDSP_ADAT_SYNC_CHECK \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, \ .info = snd_hdsp_info_sync_check, \ .get = snd_hdsp_get_adat_sync_check \ @@ -3119,7 +3120,7 @@ static snd_kcontrol_new_t snd_hdsp_controls[] = { }, { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,CON_MASK), .info = snd_hdsp_control_spdif_mask_info, .get = snd_hdsp_control_spdif_mask_get, @@ -3129,7 +3130,7 @@ static snd_kcontrol_new_t snd_hdsp_controls[] = { }, { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,PRO_MASK), .info = snd_hdsp_control_spdif_mask_info, .get = snd_hdsp_control_spdif_mask_get, @@ -3146,8 +3147,6 @@ HDSP_SPDIF_NON_AUDIO("IEC958 Non-audio Bit", 0), /* 'Sample Clock Source' complies with the alsa control naming scheme */ HDSP_CLOCK_SOURCE("Sample Clock Source", 0), { - /* FIXME: should be PCM or MIXER? */ - /* .iface = SNDRV_CTL_ELEM_IFACE_PCM, */ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Sample Clock Source Locking", .info = snd_hdsp_info_clock_source_lock, diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index 9e86d0eb41ce..5d786d113b25 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -65,7 +65,7 @@ module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable/disable specific HDSPM soundcards."); module_param_array(precise_ptr, bool, NULL, 0444); -MODULE_PARM_DESC(precise_ptr, "Enable precise pointer, or disable."); +MODULE_PARM_DESC(precise_ptr, "Enable or disable precise pointer."); module_param_array(line_outs_monitor, bool, NULL, 0444); MODULE_PARM_DESC(line_outs_monitor, @@ -1104,14 +1104,14 @@ static int snd_hdspm_midi_output_close(snd_rawmidi_substream_t * substream) return 0; } -snd_rawmidi_ops_t snd_hdspm_midi_output = +static snd_rawmidi_ops_t snd_hdspm_midi_output = { .open = snd_hdspm_midi_output_open, .close = snd_hdspm_midi_output_close, .trigger = snd_hdspm_midi_output_trigger, }; -snd_rawmidi_ops_t snd_hdspm_midi_input = +static snd_rawmidi_ops_t snd_hdspm_midi_input = { .open = snd_hdspm_midi_input_open, .close = snd_hdspm_midi_input_close, @@ -1168,7 +1168,7 @@ static void hdspm_midi_tasklet(unsigned long arg) /* get the system sample rate which is set */ #define HDSPM_SYSTEM_SAMPLE_RATE(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READ, \ @@ -1195,7 +1195,7 @@ static int snd_hdspm_get_system_sample_rate(snd_kcontrol_t * kcontrol, } #define HDSPM_AUTOSYNC_SAMPLE_RATE(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_PCM, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READ, \ @@ -1264,7 +1264,7 @@ static int snd_hdspm_get_autosync_sample_rate(snd_kcontrol_t * kcontrol, } #define HDSPM_SYSTEM_CLOCK_MODE(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READ, \ @@ -1310,7 +1310,7 @@ static int snd_hdspm_get_system_clock_mode(snd_kcontrol_t * kcontrol, } #define HDSPM_CLOCK_SOURCE(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_PCM, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .info = snd_hdspm_info_clock_source, \ @@ -1457,7 +1457,7 @@ static int snd_hdspm_put_clock_source(snd_kcontrol_t * kcontrol, } #define HDSPM_PREF_SYNC_REF(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .info = snd_hdspm_info_pref_sync_ref, \ @@ -1547,7 +1547,7 @@ static int snd_hdspm_put_pref_sync_ref(snd_kcontrol_t * kcontrol, } #define HDSPM_AUTOSYNC_REF(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READ, \ @@ -1604,7 +1604,7 @@ static int snd_hdspm_get_autosync_ref(snd_kcontrol_t * kcontrol, } #define HDSPM_LINE_OUT(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .info = snd_hdspm_info_line_out, \ @@ -1668,7 +1668,7 @@ static int snd_hdspm_put_line_out(snd_kcontrol_t * kcontrol, } #define HDSPM_TX_64(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .info = snd_hdspm_info_tx_64, \ @@ -1731,7 +1731,7 @@ static int snd_hdspm_put_tx_64(snd_kcontrol_t * kcontrol, } #define HDSPM_C_TMS(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .info = snd_hdspm_info_c_tms, \ @@ -1794,7 +1794,7 @@ static int snd_hdspm_put_c_tms(snd_kcontrol_t * kcontrol, } #define HDSPM_SAFE_MODE(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .info = snd_hdspm_info_safe_mode, \ @@ -1857,7 +1857,7 @@ static int snd_hdspm_put_safe_mode(snd_kcontrol_t * kcontrol, } #define HDSPM_INPUT_SELECT(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .info = snd_hdspm_info_input_select, \ @@ -1941,6 +1941,7 @@ static int snd_hdspm_put_input_select(snd_kcontrol_t * kcontrol, { .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ .name = xname, \ .index = xindex, \ + .device = 0, \ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | \ SNDRV_CTL_ELEM_ACCESS_VOLATILE, \ .info = snd_hdspm_info_mixer, \ @@ -2124,7 +2125,7 @@ static int snd_hdspm_put_playback_mixer(snd_kcontrol_t * kcontrol, } #define HDSPM_WC_SYNC_CHECK(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, \ @@ -2170,7 +2171,7 @@ static int snd_hdspm_get_wc_sync_check(snd_kcontrol_t * kcontrol, #define HDSPM_MADI_SYNC_CHECK(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, \ diff --git a/sound/pci/rme9652/rme9652.c b/sound/pci/rme9652/rme9652.c index 1bc9d0df8516..8ee4d6fd6ea7 100644 --- a/sound/pci/rme9652/rme9652.c +++ b/sound/pci/rme9652/rme9652.c @@ -893,7 +893,7 @@ static int snd_rme9652_control_spdif_mask_get(snd_kcontrol_t * kcontrol, snd_ctl } #define RME9652_ADAT1_IN(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = xname, .index = xindex, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ .info = snd_rme9652_info_adat1_in, \ .get = snd_rme9652_get_adat1_in, \ .put = snd_rme9652_put_adat1_in } @@ -971,7 +971,7 @@ static int snd_rme9652_put_adat1_in(snd_kcontrol_t * kcontrol, snd_ctl_elem_valu } #define RME9652_SPDIF_IN(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = xname, .index = xindex, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ .info = snd_rme9652_info_spdif_in, \ .get = snd_rme9652_get_spdif_in, .put = snd_rme9652_put_spdif_in } @@ -1042,7 +1042,7 @@ static int snd_rme9652_put_spdif_in(snd_kcontrol_t * kcontrol, snd_ctl_elem_valu } #define RME9652_SPDIF_OUT(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = xname, .index = xindex, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ .info = snd_rme9652_info_spdif_out, \ .get = snd_rme9652_get_spdif_out, .put = snd_rme9652_put_spdif_out } @@ -1110,7 +1110,7 @@ static int snd_rme9652_put_spdif_out(snd_kcontrol_t * kcontrol, snd_ctl_elem_val } #define RME9652_SYNC_MODE(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = xname, .index = xindex, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ .info = snd_rme9652_info_sync_mode, \ .get = snd_rme9652_get_sync_mode, .put = snd_rme9652_put_sync_mode } @@ -1195,7 +1195,7 @@ static int snd_rme9652_put_sync_mode(snd_kcontrol_t * kcontrol, snd_ctl_elem_val } #define RME9652_SYNC_PREF(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = xname, .index = xindex, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ .info = snd_rme9652_info_sync_pref, \ .get = snd_rme9652_get_sync_pref, .put = snd_rme9652_put_sync_pref } @@ -1340,7 +1340,7 @@ static int snd_rme9652_put_thru(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t } #define RME9652_PASSTHRU(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = xname, .index = xindex, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ .info = snd_rme9652_info_passthru, \ .put = snd_rme9652_put_passthru, \ .get = snd_rme9652_get_passthru } @@ -1386,7 +1386,7 @@ static int snd_rme9652_put_passthru(snd_kcontrol_t * kcontrol, snd_ctl_elem_valu /* Read-only switches */ #define RME9652_SPDIF_RATE(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = xname, .index = xindex, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, \ .info = snd_rme9652_info_spdif_rate, \ .get = snd_rme9652_get_spdif_rate } @@ -1411,7 +1411,7 @@ static int snd_rme9652_get_spdif_rate(snd_kcontrol_t * kcontrol, snd_ctl_elem_va } #define RME9652_ADAT_SYNC(xname, xindex, xidx) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = xname, .index = xindex, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, \ .info = snd_rme9652_info_adat_sync, \ .get = snd_rme9652_get_adat_sync, .private_value = xidx } @@ -1447,7 +1447,7 @@ static int snd_rme9652_get_adat_sync(snd_kcontrol_t * kcontrol, snd_ctl_elem_val } #define RME9652_TC_VALID(xname, xindex) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = xname, .index = xindex, \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, \ .info = snd_rme9652_info_tc_valid, \ .get = snd_rme9652_get_tc_valid } @@ -1545,7 +1545,7 @@ static snd_kcontrol_new_t snd_rme9652_controls[] = { }, { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,CON_MASK), .info = snd_rme9652_control_spdif_mask_info, .get = snd_rme9652_control_spdif_mask_get, @@ -1555,7 +1555,7 @@ static snd_kcontrol_new_t snd_rme9652_controls[] = { }, { .access = SNDRV_CTL_ELEM_ACCESS_READ, - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,PRO_MASK), .info = snd_rme9652_control_spdif_mask_info, .get = snd_rme9652_control_spdif_mask_get, @@ -1568,7 +1568,7 @@ RME9652_SPDIF_OUT("IEC958 Output also on ADAT1", 0), RME9652_SYNC_MODE("Sync Mode", 0), RME9652_SYNC_PREF("Preferred Sync Source", 0), { - .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Channels Thru", .index = 0, .info = snd_rme9652_info_thru, diff --git a/sound/pci/trident/trident_main.c b/sound/pci/trident/trident_main.c index 29d89bfba0a4..f30d9d947862 100644 --- a/sound/pci/trident/trident_main.c +++ b/sound/pci/trident/trident_main.c @@ -1689,7 +1689,7 @@ static snd_pcm_hardware_t snd_trident_playback = .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_SYNC_START | - SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME), + SNDRV_PCM_INFO_PAUSE /* | SNDRV_PCM_INFO_RESUME */), .formats = (SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_U16_LE), .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000, @@ -1714,7 +1714,7 @@ static snd_pcm_hardware_t snd_trident_capture = .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_SYNC_START | - SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME), + SNDRV_PCM_INFO_PAUSE /* | SNDRV_PCM_INFO_RESUME */), .formats = (SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_U16_LE), .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000, @@ -1739,7 +1739,7 @@ static snd_pcm_hardware_t snd_trident_foldback = .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_SYNC_START | - SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME), + SNDRV_PCM_INFO_PAUSE /* | SNDRV_PCM_INFO_RESUME */), .formats = SNDRV_PCM_FMTBIT_S16_LE, .rates = SNDRV_PCM_RATE_48000, .rate_min = 48000, @@ -1763,7 +1763,7 @@ static snd_pcm_hardware_t snd_trident_spdif = .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_SYNC_START | - SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME), + SNDRV_PCM_INFO_PAUSE /* | SNDRV_PCM_INFO_RESUME */), .formats = SNDRV_PCM_FMTBIT_S16_LE, .rates = (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000), @@ -1784,7 +1784,7 @@ static snd_pcm_hardware_t snd_trident_spdif_7018 = .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_SYNC_START | - SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME), + SNDRV_PCM_INFO_PAUSE /* | SNDRV_PCM_INFO_RESUME */), .formats = SNDRV_PCM_FMTBIT_S16_LE, .rates = SNDRV_PCM_RATE_48000, .rate_min = 48000, diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c index 4889600387c8..56c6e52d7264 100644 --- a/sound/pci/via82xx.c +++ b/sound/pci/via82xx.c @@ -663,10 +663,12 @@ static int snd_via82xx_pcm_trigger(snd_pcm_substream_t * substream, int cmd) val = 0; switch (cmd) { case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: val |= VIA_REG_CTRL_START; viadev->running = 1; break; case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: val = VIA_REG_CTRL_TERMINATE; viadev->running = 0; break; @@ -929,12 +931,12 @@ static int snd_via8233_playback_prepare(snd_pcm_substream_t *substream) if ((rate_changed = via_lock_rate(&chip->rates[0], ac97_rate)) < 0) return rate_changed; - if (rate_changed) { + if (rate_changed) snd_ac97_set_rate(chip->ac97, AC97_PCM_FRONT_DAC_RATE, chip->no_vra ? 48000 : runtime->rate); - snd_ac97_set_rate(chip->ac97, AC97_SPDIF, - chip->no_vra ? 48000 : runtime->rate); - } + if (chip->spdif_on && viadev->reg_offset == 0x30) + snd_ac97_set_rate(chip->ac97, AC97_SPDIF, runtime->rate); + if (runtime->rate == 48000) rbits = 0xfffff; else @@ -1035,7 +1037,7 @@ static snd_pcm_hardware_t snd_via82xx_hw = .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_RESUME | + /* SNDRV_PCM_INFO_RESUME | */ SNDRV_PCM_INFO_PAUSE), .formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE, .rates = SNDRV_PCM_RATE_48000, @@ -1484,7 +1486,7 @@ static int snd_via8233_dxs3_spdif_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_val } static snd_kcontrol_new_t snd_via8233_dxs3_spdif_control __devinitdata = { - .name = "IEC958 Output Switch", + .name = SNDRV_CTL_NAME_IEC958("Output ",NONE,SWITCH), .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .info = snd_via8233_dxs3_spdif_info, .get = snd_via8233_dxs3_spdif_get, @@ -2153,6 +2155,7 @@ static int __devinit check_dxs_list(struct pci_dev *pci) { .subvendor = 0x1019, .subdevice = 0x0a81, .action = VIA_DXS_NO_VRA }, /* ECS K7VTA3 v8.0 */ { .subvendor = 0x1019, .subdevice = 0x0a85, .action = VIA_DXS_NO_VRA }, /* ECS L7VMM2 */ { .subvendor = 0x1025, .subdevice = 0x0033, .action = VIA_DXS_NO_VRA }, /* Acer Inspire 1353LM */ + { .subvendor = 0x1025, .subdevice = 0x0046, .action = VIA_DXS_SRC }, /* Acer Aspire 1524 WLMi */ { .subvendor = 0x1043, .subdevice = 0x8095, .action = VIA_DXS_NO_VRA }, /* ASUS A7V8X (FIXME: possibly VIA_DXS_ENABLE?)*/ { .subvendor = 0x1043, .subdevice = 0x80a1, .action = VIA_DXS_NO_VRA }, /* ASUS A7V8-X */ { .subvendor = 0x1043, .subdevice = 0x80b0, .action = VIA_DXS_NO_VRA }, /* ASUS A7V600 & K8V*/ @@ -2168,10 +2171,12 @@ static int __devinit check_dxs_list(struct pci_dev *pci) { .subvendor = 0x1297, .subdevice = 0xc160, .action = VIA_DXS_ENABLE }, /* Shuttle SK41G */ { .subvendor = 0x1458, .subdevice = 0xa002, .action = VIA_DXS_ENABLE }, /* Gigabyte GA-7VAXP */ { .subvendor = 0x1462, .subdevice = 0x0080, .action = VIA_DXS_SRC }, /* MSI K8T Neo-FIS2R */ + { .subvendor = 0x1462, .subdevice = 0x0430, .action = VIA_DXS_SRC }, /* MSI 7142 (K8MM-V) */ { .subvendor = 0x1462, .subdevice = 0x3800, .action = VIA_DXS_ENABLE }, /* MSI KT266 */ { .subvendor = 0x1462, .subdevice = 0x5901, .action = VIA_DXS_NO_VRA }, /* MSI KT6 Delta-SR */ { .subvendor = 0x1462, .subdevice = 0x7023, .action = VIA_DXS_NO_VRA }, /* MSI K8T Neo2-FI */ { .subvendor = 0x1462, .subdevice = 0x7120, .action = VIA_DXS_ENABLE }, /* MSI KT4V */ + { .subvendor = 0x1462, .subdevice = 0x7142, .action = VIA_DXS_ENABLE }, /* MSI K8MM-V */ { .subvendor = 0x147b, .subdevice = 0x1401, .action = VIA_DXS_ENABLE }, /* ABIT KD7(-RAID) */ { .subvendor = 0x147b, .subdevice = 0x1411, .action = VIA_DXS_ENABLE }, /* ABIT VA-20 */ { .subvendor = 0x147b, .subdevice = 0x1413, .action = VIA_DXS_ENABLE }, /* ABIT KV8 Pro */ diff --git a/sound/pci/via82xx_modem.c b/sound/pci/via82xx_modem.c index 4a9779cc9733..5872d438a04a 100644 --- a/sound/pci/via82xx_modem.c +++ b/sound/pci/via82xx_modem.c @@ -521,6 +521,7 @@ static int snd_via82xx_pcm_trigger(snd_pcm_substream_t * substream, int cmd) switch (cmd) { case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_SUSPEND: val |= VIA_REG_CTRL_START; viadev->running = 1; break; @@ -697,7 +698,7 @@ static snd_pcm_hardware_t snd_via82xx_hw = .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_RESUME | + /* SNDRV_PCM_INFO_RESUME | */ SNDRV_PCM_INFO_PAUSE), .formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE, .rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_KNOT, diff --git a/sound/pci/ymfpci/ymfpci_main.c b/sound/pci/ymfpci/ymfpci_main.c index d54f88a1b525..054836412dc4 100644 --- a/sound/pci/ymfpci/ymfpci_main.c +++ b/sound/pci/ymfpci/ymfpci_main.c @@ -321,6 +321,26 @@ static void snd_ymfpci_pcm_interrupt(ymfpci_t *chip, ymfpci_voice_t *voice) snd_pcm_period_elapsed(ypcm->substream); spin_lock(&chip->reg_lock); } + + if (unlikely(ypcm->update_pcm_vol)) { + unsigned int subs = ypcm->substream->number; + unsigned int next_bank = 1 - chip->active_bank; + snd_ymfpci_playback_bank_t *bank; + u32 volume; + + bank = &voice->bank[next_bank]; + volume = cpu_to_le32(chip->pcm_mixer[subs].left << 15); + bank->left_gain_end = volume; + if (ypcm->output_rear) + bank->eff2_gain_end = volume; + if (ypcm->voices[1]) + bank = &ypcm->voices[1]->bank[next_bank]; + volume = cpu_to_le32(chip->pcm_mixer[subs].right << 15); + bank->right_gain_end = volume; + if (ypcm->output_rear) + bank->eff3_gain_end = volume; + ypcm->update_pcm_vol--; + } } spin_unlock(&chip->reg_lock); } @@ -451,87 +471,74 @@ static int snd_ymfpci_pcm_voice_alloc(ymfpci_pcm_t *ypcm, int voices) return 0; } -static void snd_ymfpci_pcm_init_voice(ymfpci_voice_t *voice, int stereo, - int rate, int w_16, unsigned long addr, - unsigned int end, - int output_front, int output_rear) +static void snd_ymfpci_pcm_init_voice(ymfpci_pcm_t *ypcm, unsigned int voiceidx, + snd_pcm_runtime_t *runtime, + int has_pcm_volume) { + ymfpci_voice_t *voice = ypcm->voices[voiceidx]; u32 format; - u32 delta = snd_ymfpci_calc_delta(rate); - u32 lpfQ = snd_ymfpci_calc_lpfQ(rate); - u32 lpfK = snd_ymfpci_calc_lpfK(rate); + u32 delta = snd_ymfpci_calc_delta(runtime->rate); + u32 lpfQ = snd_ymfpci_calc_lpfQ(runtime->rate); + u32 lpfK = snd_ymfpci_calc_lpfK(runtime->rate); snd_ymfpci_playback_bank_t *bank; unsigned int nbank; + u32 vol_left, vol_right; + u8 use_left, use_right; snd_assert(voice != NULL, return); - format = (stereo ? 0x00010000 : 0) | (w_16 ? 0 : 0x80000000); + if (runtime->channels == 1) { + use_left = 1; + use_right = 1; + } else { + use_left = (voiceidx & 1) == 0; + use_right = !use_left; + } + if (has_pcm_volume) { + vol_left = cpu_to_le32(ypcm->chip->pcm_mixer + [ypcm->substream->number].left << 15); + vol_right = cpu_to_le32(ypcm->chip->pcm_mixer + [ypcm->substream->number].right << 15); + } else { + vol_left = cpu_to_le32(0x40000000); + vol_right = cpu_to_le32(0x40000000); + } + format = runtime->channels == 2 ? 0x00010000 : 0; + if (snd_pcm_format_width(runtime->format) == 8) + format |= 0x80000000; + if (runtime->channels == 2 && (voiceidx & 1) != 0) + format |= 1; for (nbank = 0; nbank < 2; nbank++) { bank = &voice->bank[nbank]; + memset(bank, 0, sizeof(*bank)); bank->format = cpu_to_le32(format); - bank->loop_default = 0; - bank->base = cpu_to_le32(addr); - bank->loop_start = 0; - bank->loop_end = cpu_to_le32(end); - bank->loop_frac = 0; - bank->eg_gain_end = cpu_to_le32(0x40000000); + bank->base = cpu_to_le32(runtime->dma_addr); + bank->loop_end = cpu_to_le32(ypcm->buffer_size); bank->lpfQ = cpu_to_le32(lpfQ); - bank->status = 0; - bank->num_of_frames = 0; - bank->loop_count = 0; - bank->start = 0; - bank->start_frac = 0; bank->delta = bank->delta_end = cpu_to_le32(delta); bank->lpfK = bank->lpfK_end = cpu_to_le32(lpfK); - bank->eg_gain = cpu_to_le32(0x40000000); - bank->lpfD1 = - bank->lpfD2 = 0; - - bank->left_gain = - bank->right_gain = - bank->left_gain_end = - bank->right_gain_end = - bank->eff1_gain = - bank->eff2_gain = - bank->eff3_gain = - bank->eff1_gain_end = - bank->eff2_gain_end = - bank->eff3_gain_end = 0; - - if (!stereo) { - if (output_front) { - bank->left_gain = + bank->eg_gain = + bank->eg_gain_end = cpu_to_le32(0x40000000); + + if (ypcm->output_front) { + if (use_left) { + bank->left_gain = + bank->left_gain_end = vol_left; + } + if (use_right) { bank->right_gain = - bank->left_gain_end = - bank->right_gain_end = cpu_to_le32(0x40000000); + bank->right_gain_end = vol_right; } - if (output_rear) { + } + if (ypcm->output_rear) { + if (use_left) { bank->eff2_gain = - bank->eff2_gain_end = - bank->eff3_gain = - bank->eff3_gain_end = cpu_to_le32(0x40000000); - } - } else { - if (output_front) { - if ((voice->number & 1) == 0) { - bank->left_gain = - bank->left_gain_end = cpu_to_le32(0x40000000); - } else { - bank->format |= cpu_to_le32(1); - bank->right_gain = - bank->right_gain_end = cpu_to_le32(0x40000000); - } + bank->eff2_gain_end = vol_left; } - if (output_rear) { - if ((voice->number & 1) == 0) { - bank->eff3_gain = - bank->eff3_gain_end = cpu_to_le32(0x40000000); - } else { - bank->format |= cpu_to_le32(1); - bank->eff2_gain = - bank->eff2_gain_end = cpu_to_le32(0x40000000); - } + if (use_right) { + bank->eff3_gain = + bank->eff3_gain_end = vol_right; } } } @@ -613,7 +620,7 @@ static int snd_ymfpci_playback_hw_free(snd_pcm_substream_t * substream) static int snd_ymfpci_playback_prepare(snd_pcm_substream_t * substream) { - // ymfpci_t *chip = snd_pcm_substream_chip(substream); + ymfpci_t *chip = snd_pcm_substream_chip(substream); snd_pcm_runtime_t *runtime = substream->runtime; ymfpci_pcm_t *ypcm = runtime->private_data; unsigned int nvoice; @@ -623,14 +630,8 @@ static int snd_ymfpci_playback_prepare(snd_pcm_substream_t * substream) ypcm->period_pos = 0; ypcm->last_pos = 0; for (nvoice = 0; nvoice < runtime->channels; nvoice++) - snd_ymfpci_pcm_init_voice(ypcm->voices[nvoice], - runtime->channels == 2, - runtime->rate, - snd_pcm_format_width(runtime->format) == 16, - runtime->dma_addr, - ypcm->buffer_size, - ypcm->output_front, - ypcm->output_rear); + snd_ymfpci_pcm_init_voice(ypcm, nvoice, runtime, + substream->pcm == chip->pcm); return 0; } @@ -882,6 +883,7 @@ static int snd_ymfpci_playback_open(snd_pcm_substream_t * substream) ymfpci_t *chip = snd_pcm_substream_chip(substream); snd_pcm_runtime_t *runtime = substream->runtime; ymfpci_pcm_t *ypcm; + snd_kcontrol_t *kctl; int err; if ((err = snd_ymfpci_playback_open_1(substream)) < 0) @@ -895,6 +897,10 @@ static int snd_ymfpci_playback_open(snd_pcm_substream_t * substream) chip->rear_opened++; } spin_unlock_irq(&chip->reg_lock); + + kctl = chip->pcm_mixer[substream->number].ctl; + kctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_INACTIVE; + snd_ctl_notify(chip->card, SNDRV_CTL_EVENT_MASK_INFO, &kctl->id); return 0; } @@ -987,6 +993,7 @@ static int snd_ymfpci_playback_close(snd_pcm_substream_t * substream) { ymfpci_t *chip = snd_pcm_substream_chip(substream); ymfpci_pcm_t *ypcm = substream->runtime->private_data; + snd_kcontrol_t *kctl; spin_lock_irq(&chip->reg_lock); if (ypcm->output_rear && chip->rear_opened > 0) { @@ -994,6 +1001,9 @@ static int snd_ymfpci_playback_close(snd_pcm_substream_t * substream) ymfpci_close_extension(chip); } spin_unlock_irq(&chip->reg_lock); + kctl = chip->pcm_mixer[substream->number].ctl; + kctl->vd[0].access |= SNDRV_CTL_ELEM_ACCESS_INACTIVE; + snd_ctl_notify(chip->card, SNDRV_CTL_EVENT_MASK_INFO, &kctl->id); return snd_ymfpci_playback_close_1(substream); } @@ -1665,6 +1675,66 @@ static snd_kcontrol_new_t snd_ymfpci_rear_shared __devinitdata = { .private_value = 2, }; +/* + * PCM voice volume + */ + +static int snd_ymfpci_pcm_vol_info(snd_kcontrol_t *kcontrol, + snd_ctl_elem_info_t *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 2; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 0x8000; + return 0; +} + +static int snd_ymfpci_pcm_vol_get(snd_kcontrol_t *kcontrol, + snd_ctl_elem_value_t *ucontrol) +{ + ymfpci_t *chip = snd_kcontrol_chip(kcontrol); + unsigned int subs = kcontrol->id.subdevice; + + ucontrol->value.integer.value[0] = chip->pcm_mixer[subs].left; + ucontrol->value.integer.value[1] = chip->pcm_mixer[subs].right; + return 0; +} + +static int snd_ymfpci_pcm_vol_put(snd_kcontrol_t *kcontrol, + snd_ctl_elem_value_t *ucontrol) +{ + ymfpci_t *chip = snd_kcontrol_chip(kcontrol); + unsigned int subs = kcontrol->id.subdevice; + snd_pcm_substream_t *substream; + unsigned long flags; + + if (ucontrol->value.integer.value[0] != chip->pcm_mixer[subs].left || + ucontrol->value.integer.value[1] != chip->pcm_mixer[subs].right) { + chip->pcm_mixer[subs].left = ucontrol->value.integer.value[0]; + chip->pcm_mixer[subs].right = ucontrol->value.integer.value[1]; + + substream = (snd_pcm_substream_t *)kcontrol->private_value; + spin_lock_irqsave(&chip->voice_lock, flags); + if (substream->runtime && substream->runtime->private_data) { + ymfpci_pcm_t *ypcm = substream->runtime->private_data; + ypcm->update_pcm_vol = 2; + } + spin_unlock_irqrestore(&chip->voice_lock, flags); + return 1; + } + return 0; +} + +static snd_kcontrol_new_t snd_ymfpci_pcm_volume __devinitdata = { + .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .name = "PCM Playback Volume", + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | + SNDRV_CTL_ELEM_ACCESS_INACTIVE, + .info = snd_ymfpci_pcm_vol_info, + .get = snd_ymfpci_pcm_vol_get, + .put = snd_ymfpci_pcm_vol_put, +}; + /* * Mixer routines @@ -1686,6 +1756,7 @@ int __devinit snd_ymfpci_mixer(ymfpci_t *chip, int rear_switch) { ac97_template_t ac97; snd_kcontrol_t *kctl; + snd_pcm_substream_t *substream; unsigned int idx; int err; static ac97_bus_ops_t ops = { @@ -1739,6 +1810,23 @@ int __devinit snd_ymfpci_mixer(ymfpci_t *chip, int rear_switch) return err; } + /* per-voice volume */ + substream = chip->pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream; + for (idx = 0; idx < 32; ++idx) { + kctl = snd_ctl_new1(&snd_ymfpci_pcm_volume, chip); + if (!kctl) + return -ENOMEM; + kctl->id.device = chip->pcm->device; + kctl->id.subdevice = idx; + kctl->private_value = (unsigned long)substream; + if ((err = snd_ctl_add(chip->card, kctl)) < 0) + return err; + chip->pcm_mixer[idx].left = 0x8000; + chip->pcm_mixer[idx].right = 0x8000; + chip->pcm_mixer[idx].ctl = kctl; + substream = substream->next; + } + return 0; } diff --git a/sound/pcmcia/vx/vxpocket.c b/sound/pcmcia/vx/vxpocket.c index 3a82161d3b24..1e8f16b4c073 100644 --- a/sound/pcmcia/vx/vxpocket.c +++ b/sound/pcmcia/vx/vxpocket.c @@ -297,6 +297,7 @@ static void vxpocket_config(dev_link_t *link) CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link->handle, &link->conf)); chip->dev = &handle_to_dev(link->handle); + snd_card_set_dev(chip->card, chip->dev); if (snd_vxpocket_assign_resources(chip, link->io.BasePort1, link->irq.AssignedIRQ) < 0) goto failed; @@ -376,7 +377,7 @@ static int vxpocket_event(event_t event, int priority, event_callback_args_t *ar /* */ -static dev_link_t *vxp_attach(void) +static dev_link_t *vxpocket_attach(void) { snd_card_t *card; struct snd_vxpocket *vxp; @@ -407,7 +408,7 @@ static dev_link_t *vxp_attach(void) return NULL; } - vxp->index = index[i]; + vxp->index = i; card_alloc |= 1 << i; /* Chain drivers */ @@ -417,7 +418,7 @@ static dev_link_t *vxp_attach(void) return &vxp->link; } -static void vxp_detach(dev_link_t *link) +static void vxpocket_detach(dev_link_t *link) { struct snd_vxpocket *vxp; vx_core_t *chip; @@ -458,8 +459,9 @@ static struct pcmcia_driver vxp_cs_driver = { .drv = { .name = "snd-vxpocket", }, - .attach = vxp_attach, - .detach = vxp_detach, + .attach = vxpocket_attach, + .detach = vxpocket_detach, + .event = vxpocket_event, .id_table = vxp_ids, }; diff --git a/sound/sound_core.c b/sound/sound_core.c index 21a69e096225..954f994592ab 100644 --- a/sound/sound_core.c +++ b/sound/sound_core.c @@ -153,7 +153,7 @@ static DEFINE_SPINLOCK(sound_loader_lock); * list. Acquires locks as needed */ -static int sound_insert_unit(struct sound_unit **list, struct file_operations *fops, int index, int low, int top, const char *name, umode_t mode) +static int sound_insert_unit(struct sound_unit **list, struct file_operations *fops, int index, int low, int top, const char *name, umode_t mode, struct device *dev) { struct sound_unit *s = kmalloc(sizeof(*s), GFP_KERNEL); int r; @@ -175,7 +175,7 @@ static int sound_insert_unit(struct sound_unit **list, struct file_operations *f devfs_mk_cdev(MKDEV(SOUND_MAJOR, s->unit_minor), S_IFCHR | mode, s->name); class_device_create(sound_class, MKDEV(SOUND_MAJOR, s->unit_minor), - NULL, s->name+6); + dev, s->name+6); return r; fail: @@ -227,16 +227,18 @@ static void sound_remove_unit(struct sound_unit **list, int unit) static struct sound_unit *chains[SOUND_STEP]; /** - * register_sound_special - register a special sound node + * register_sound_special_device - register a special sound node * @fops: File operations for the driver * @unit: Unit number to allocate + * @dev: device pointer * * Allocate a special sound device by minor number from the sound * subsystem. The allocated number is returned on succes. On failure * a negative error code is returned. */ -int register_sound_special(struct file_operations *fops, int unit) +int register_sound_special_device(struct file_operations *fops, int unit, + struct device *dev) { const int chain = unit % SOUND_STEP; int max_unit = 128 + chain; @@ -294,9 +296,16 @@ int register_sound_special(struct file_operations *fops, int unit) break; } return sound_insert_unit(&chains[chain], fops, -1, unit, max_unit, - name, S_IRUSR | S_IWUSR); + name, S_IRUSR | S_IWUSR, dev); } +EXPORT_SYMBOL(register_sound_special_device); + +int register_sound_special(struct file_operations *fops, int unit) +{ + return register_sound_special_device(fops, unit, NULL); +} + EXPORT_SYMBOL(register_sound_special); /** @@ -312,7 +321,7 @@ EXPORT_SYMBOL(register_sound_special); int register_sound_mixer(struct file_operations *fops, int dev) { return sound_insert_unit(&chains[0], fops, dev, 0, 128, - "mixer", S_IRUSR | S_IWUSR); + "mixer", S_IRUSR | S_IWUSR, NULL); } EXPORT_SYMBOL(register_sound_mixer); @@ -330,7 +339,7 @@ EXPORT_SYMBOL(register_sound_mixer); int register_sound_midi(struct file_operations *fops, int dev) { return sound_insert_unit(&chains[2], fops, dev, 2, 130, - "midi", S_IRUSR | S_IWUSR); + "midi", S_IRUSR | S_IWUSR, NULL); } EXPORT_SYMBOL(register_sound_midi); @@ -356,7 +365,7 @@ EXPORT_SYMBOL(register_sound_midi); int register_sound_dsp(struct file_operations *fops, int dev) { return sound_insert_unit(&chains[3], fops, dev, 3, 131, - "dsp", S_IWUSR | S_IRUSR); + "dsp", S_IWUSR | S_IRUSR, NULL); } EXPORT_SYMBOL(register_sound_dsp); @@ -375,7 +384,7 @@ EXPORT_SYMBOL(register_sound_dsp); int register_sound_synth(struct file_operations *fops, int dev) { return sound_insert_unit(&chains[9], fops, dev, 9, 137, - "synth", S_IRUSR | S_IWUSR); + "synth", S_IRUSR | S_IWUSR, NULL); } EXPORT_SYMBOL(register_sound_synth); diff --git a/sound/synth/emux/emux_synth.c b/sound/synth/emux/emux_synth.c index f13b038329eb..751bf1272af3 100644 --- a/sound/synth/emux/emux_synth.c +++ b/sound/synth/emux/emux_synth.c @@ -98,7 +98,6 @@ snd_emux_note_on(void *p, int note, int vel, snd_midi_channel_t *chan) vp = emu->ops.get_voice(emu, port); if (vp == NULL || vp->ch < 0) continue; - snd_assert(vp->emu != NULL && vp->hw != NULL, return); if (STATE_IS_PLAYING(vp->state)) emu->ops.terminate(vp); diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index 8298c462c291..5aa5fe651a8a 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -41,10 +41,12 @@ #include <sound/driver.h> #include <linux/bitops.h> #include <linux/init.h> +#include <linux/interrupt.h> #include <linux/list.h> #include <linux/slab.h> #include <linux/string.h> #include <linux/usb.h> +#include <linux/vmalloc.h> #include <linux/moduleparam.h> #include <sound/core.h> #include <sound/info.h> @@ -79,7 +81,7 @@ module_param_array(vid, int, NULL, 0444); MODULE_PARM_DESC(vid, "Vendor ID for the USB audio device."); module_param_array(pid, int, NULL, 0444); MODULE_PARM_DESC(pid, "Product ID for the USB audio device."); -module_param(nrpacks, int, 0444); +module_param(nrpacks, int, 0644); MODULE_PARM_DESC(nrpacks, "Max. number of packets per URB."); module_param(async_unlink, bool, 0444); MODULE_PARM_DESC(async_unlink, "Use async unlink mode."); @@ -97,7 +99,7 @@ MODULE_PARM_DESC(async_unlink, "Use async unlink mode."); #define MAX_PACKS 10 #define MAX_PACKS_HS (MAX_PACKS * 8) /* in high speed mode */ -#define MAX_URBS 5 /* max. 20ms long packets */ +#define MAX_URBS 8 #define SYNC_URBS 4 /* always four urbs for sync */ #define MIN_PACKS_URB 1 /* minimum 1 packet per urb */ @@ -126,11 +128,10 @@ struct audioformat { struct snd_urb_ctx { struct urb *urb; + unsigned int buffer_size; /* size of data buffer, if data URB */ snd_usb_substream_t *subs; int index; /* index for urb array */ int packets; /* number of packets per urb */ - int transfer; /* transferred size */ - char *buf; /* buffer for capture */ }; struct snd_urb_ops { @@ -165,12 +166,11 @@ struct snd_usb_substream { unsigned int curframesize; /* current packet size in frames (for capture) */ unsigned int fill_max: 1; /* fill max packet size always */ unsigned int fmt_type; /* USB audio format type (1-3) */ + unsigned int packs_per_ms; /* packets per millisecond (for playback) */ unsigned int running: 1; /* running status */ - unsigned int hwptr; /* free frame position in the buffer (only for playback) */ unsigned int hwptr_done; /* processed frame position in the buffer */ - unsigned int transfer_sched; /* scheduled frames since last period (for playback) */ unsigned int transfer_done; /* processed frames since last period update */ unsigned long active_mask; /* bitmask of active urbs */ unsigned long unlink_mask; /* bitmask of unlinked urbs */ @@ -178,13 +178,14 @@ struct snd_usb_substream { unsigned int nurbs; /* # urbs */ snd_urb_ctx_t dataurb[MAX_URBS]; /* data urb table */ snd_urb_ctx_t syncurb[SYNC_URBS]; /* sync urb table */ - char syncbuf[SYNC_URBS * 4]; /* sync buffer; it's so small - let's get static */ - char *tmpbuf; /* temporary buffer for playback */ + char *syncbuf; /* sync buffer for all sync URBs */ + dma_addr_t sync_dma; /* DMA address of syncbuf */ u64 formats; /* format bitmasks (all or'ed) */ unsigned int num_formats; /* number of supported audio formats (list) */ struct list_head fmt_list; /* format list */ spinlock_t lock; + struct tasklet_struct start_period_elapsed; /* for start trigger */ struct snd_urb_ops ops; /* callbacks (must be filled at init) */ }; @@ -311,27 +312,17 @@ static int prepare_capture_urb(snd_usb_substream_t *subs, struct urb *urb) { int i, offs; - unsigned long flags; snd_urb_ctx_t *ctx = (snd_urb_ctx_t *)urb->context; offs = 0; urb->dev = ctx->subs->dev; /* we need to set this at each time */ - urb->number_of_packets = 0; - spin_lock_irqsave(&subs->lock, flags); for (i = 0; i < ctx->packets; i++) { urb->iso_frame_desc[i].offset = offs; urb->iso_frame_desc[i].length = subs->curpacksize; offs += subs->curpacksize; - urb->number_of_packets++; - subs->transfer_sched += subs->curframesize; - if (subs->transfer_sched >= runtime->period_size) { - subs->transfer_sched -= runtime->period_size; - break; - } } - spin_unlock_irqrestore(&subs->lock, flags); - urb->transfer_buffer = ctx->buf; urb->transfer_buffer_length = offs; + urb->number_of_packets = ctx->packets; #if 0 // for check if (! urb->bandwidth) { int bustime; @@ -359,6 +350,7 @@ static int retire_capture_urb(snd_usb_substream_t *subs, unsigned char *cp; int i; unsigned int stride, len, oldptr; + int period_elapsed = 0; stride = runtime->frame_bits >> 3; @@ -378,6 +370,10 @@ static int retire_capture_urb(snd_usb_substream_t *subs, if (subs->hwptr_done >= runtime->buffer_size) subs->hwptr_done -= runtime->buffer_size; subs->transfer_done += len; + if (subs->transfer_done >= runtime->period_size) { + subs->transfer_done -= runtime->period_size; + period_elapsed = 1; + } spin_unlock_irqrestore(&subs->lock, flags); /* copy a data chunk */ if (oldptr + len > runtime->buffer_size) { @@ -388,15 +384,9 @@ static int retire_capture_urb(snd_usb_substream_t *subs, } else { memcpy(runtime->dma_area + oldptr * stride, cp, len * stride); } - /* update the pointer, call callback if necessary */ - spin_lock_irqsave(&subs->lock, flags); - if (subs->transfer_done >= runtime->period_size) { - subs->transfer_done -= runtime->period_size; - spin_unlock_irqrestore(&subs->lock, flags); - snd_pcm_period_elapsed(subs->pcm_substream); - } else - spin_unlock_irqrestore(&subs->lock, flags); } + if (period_elapsed) + snd_pcm_period_elapsed(subs->pcm_substream); return 0; } @@ -492,12 +482,10 @@ static int retire_playback_sync_urb_hs(snd_usb_substream_t *subs, /* * prepare urb for playback data pipe * - * we copy the data directly from the pcm buffer. - * the current position to be copied is held in hwptr field. - * since a urb can handle only a single linear buffer, if the total - * transferred area overflows the buffer boundary, we cannot send - * it directly from the buffer. thus the data is once copied to - * a temporary buffer and urb points to that. + * Since a URB can handle only a single linear buffer, we must use double + * buffering when the data to be transferred overflows the buffer boundary. + * To avoid inconsistencies when updating hwptr_done, we use double buffering + * for all URBs. */ static int prepare_playback_urb(snd_usb_substream_t *subs, snd_pcm_runtime_t *runtime, @@ -506,6 +494,7 @@ static int prepare_playback_urb(snd_usb_substream_t *subs, int i, stride, offs; unsigned int counts; unsigned long flags; + int period_elapsed = 0; snd_urb_ctx_t *ctx = (snd_urb_ctx_t *)urb->context; stride = runtime->frame_bits >> 3; @@ -530,80 +519,85 @@ static int prepare_playback_urb(snd_usb_substream_t *subs, urb->iso_frame_desc[i].length = counts * stride; offs += counts; urb->number_of_packets++; - subs->transfer_sched += counts; - if (subs->transfer_sched >= runtime->period_size) { - subs->transfer_sched -= runtime->period_size; + subs->transfer_done += counts; + if (subs->transfer_done >= runtime->period_size) { + subs->transfer_done -= runtime->period_size; + period_elapsed = 1; if (subs->fmt_type == USB_FORMAT_TYPE_II) { - if (subs->transfer_sched > 0) { - /* FIXME: fill-max mode is not supported yet */ - offs -= subs->transfer_sched; - counts -= subs->transfer_sched; - urb->iso_frame_desc[i].length = counts * stride; - subs->transfer_sched = 0; + if (subs->transfer_done > 0) { + /* FIXME: fill-max mode is not + * supported yet */ + offs -= subs->transfer_done; + counts -= subs->transfer_done; + urb->iso_frame_desc[i].length = + counts * stride; + subs->transfer_done = 0; } i++; if (i < ctx->packets) { /* add a transfer delimiter */ - urb->iso_frame_desc[i].offset = offs * stride; + urb->iso_frame_desc[i].offset = + offs * stride; urb->iso_frame_desc[i].length = 0; urb->number_of_packets++; } + break; } - break; } + /* finish at the frame boundary at/after the period boundary */ + if (period_elapsed && + (i & (subs->packs_per_ms - 1)) == subs->packs_per_ms - 1) + break; } - if (subs->hwptr + offs > runtime->buffer_size) { - /* err, the transferred area goes over buffer boundary. - * copy the data to the temp buffer. - */ - int len; - len = runtime->buffer_size - subs->hwptr; - urb->transfer_buffer = subs->tmpbuf; - memcpy(subs->tmpbuf, runtime->dma_area + subs->hwptr * stride, len * stride); - memcpy(subs->tmpbuf + len * stride, runtime->dma_area, (offs - len) * stride); - subs->hwptr += offs; - subs->hwptr -= runtime->buffer_size; + if (subs->hwptr_done + offs > runtime->buffer_size) { + /* err, the transferred area goes over buffer boundary. */ + unsigned int len = runtime->buffer_size - subs->hwptr_done; + memcpy(urb->transfer_buffer, + runtime->dma_area + subs->hwptr_done * stride, + len * stride); + memcpy(urb->transfer_buffer + len * stride, + runtime->dma_area, + (offs - len) * stride); } else { - /* set the buffer pointer */ - urb->transfer_buffer = runtime->dma_area + subs->hwptr * stride; - subs->hwptr += offs; - if (subs->hwptr == runtime->buffer_size) - subs->hwptr = 0; + memcpy(urb->transfer_buffer, + runtime->dma_area + subs->hwptr_done * stride, + offs * stride); } + subs->hwptr_done += offs; + if (subs->hwptr_done >= runtime->buffer_size) + subs->hwptr_done -= runtime->buffer_size; spin_unlock_irqrestore(&subs->lock, flags); urb->transfer_buffer_length = offs * stride; - ctx->transfer = offs; - + if (period_elapsed) { + if (likely(subs->running)) + snd_pcm_period_elapsed(subs->pcm_substream); + else + tasklet_hi_schedule(&subs->start_period_elapsed); + } return 0; } /* * process after playback data complete - * - * update the current position and call callback if a period is processed. + * - nothing to do */ static int retire_playback_urb(snd_usb_substream_t *subs, snd_pcm_runtime_t *runtime, struct urb *urb) { - unsigned long flags; - snd_urb_ctx_t *ctx = (snd_urb_ctx_t *)urb->context; - - spin_lock_irqsave(&subs->lock, flags); - subs->transfer_done += ctx->transfer; - subs->hwptr_done += ctx->transfer; - ctx->transfer = 0; - if (subs->hwptr_done >= runtime->buffer_size) - subs->hwptr_done -= runtime->buffer_size; - if (subs->transfer_done >= runtime->period_size) { - subs->transfer_done -= runtime->period_size; - spin_unlock_irqrestore(&subs->lock, flags); - snd_pcm_period_elapsed(subs->pcm_substream); - } else - spin_unlock_irqrestore(&subs->lock, flags); return 0; } +/* + * Delay the snd_pcm_period_elapsed() call until after the start trigger + * callback so that we're not longer in the substream's lock. + */ +static void start_period_elapsed(unsigned long data) +{ + snd_usb_substream_t *subs = (snd_usb_substream_t *)data; + snd_pcm_period_elapsed(subs->pcm_substream); +} + /* */ @@ -683,6 +677,42 @@ static void snd_complete_sync_urb(struct urb *urb, struct pt_regs *regs) } +/* get the physical page pointer at the given offset */ +static struct page *snd_pcm_get_vmalloc_page(snd_pcm_substream_t *subs, + unsigned long offset) +{ + void *pageptr = subs->runtime->dma_area + offset; + return vmalloc_to_page(pageptr); +} + +/* allocate virtual buffer; may be called more than once */ +static int snd_pcm_alloc_vmalloc_buffer(snd_pcm_substream_t *subs, size_t size) +{ + snd_pcm_runtime_t *runtime = subs->runtime; + if (runtime->dma_area) { + if (runtime->dma_bytes >= size) + return 0; /* already large enough */ + vfree_nocheck(runtime->dma_area); + } + runtime->dma_area = vmalloc_nocheck(size); + if (! runtime->dma_area) + return -ENOMEM; + runtime->dma_bytes = size; + return 0; +} + +/* free virtual buffer; may be called more than once */ +static int snd_pcm_free_vmalloc_buffer(snd_pcm_substream_t *subs) +{ + snd_pcm_runtime_t *runtime = subs->runtime; + if (runtime->dma_area) { + vfree_nocheck(runtime->dma_area); + runtime->dma_area = NULL; + } + return 0; +} + + /* * unlink active urbs. */ @@ -824,8 +854,14 @@ static int wait_clear_urbs(snd_usb_substream_t *subs) */ static snd_pcm_uframes_t snd_usb_pcm_pointer(snd_pcm_substream_t *substream) { - snd_usb_substream_t *subs = (snd_usb_substream_t *)substream->runtime->private_data; - return subs->hwptr_done; + snd_usb_substream_t *subs; + snd_pcm_uframes_t hwptr_done; + + subs = (snd_usb_substream_t *)substream->runtime->private_data; + spin_lock(&subs->lock); + hwptr_done = subs->hwptr_done; + spin_unlock(&subs->lock); + return hwptr_done; } @@ -858,11 +894,13 @@ static int snd_usb_pcm_trigger(snd_pcm_substream_t *substream, int cmd) static void release_urb_ctx(snd_urb_ctx_t *u) { if (u->urb) { + if (u->buffer_size) + usb_buffer_free(u->subs->dev, u->buffer_size, + u->urb->transfer_buffer, + u->urb->transfer_dma); usb_free_urb(u->urb); u->urb = NULL; } - kfree(u->buf); - u->buf = NULL; } /* @@ -880,8 +918,9 @@ static void release_substream_urbs(snd_usb_substream_t *subs, int force) release_urb_ctx(&subs->dataurb[i]); for (i = 0; i < SYNC_URBS; i++) release_urb_ctx(&subs->syncurb[i]); - kfree(subs->tmpbuf); - subs->tmpbuf = NULL; + usb_buffer_free(subs->dev, SYNC_URBS * 4, + subs->syncbuf, subs->sync_dma); + subs->syncbuf = NULL; subs->nurbs = 0; } @@ -893,7 +932,7 @@ static int init_substream_urbs(snd_usb_substream_t *subs, unsigned int period_by { unsigned int maxsize, n, i; int is_playback = subs->direction == SNDRV_PCM_STREAM_PLAYBACK; - unsigned int npacks[MAX_URBS], urb_packs, total_packs; + unsigned int npacks[MAX_URBS], urb_packs, total_packs, packs_per_ms; /* calculate the frequency in 16.16 format */ if (snd_usb_get_speed(subs->dev) == USB_SPEED_FULL) @@ -920,24 +959,40 @@ static int init_substream_urbs(snd_usb_substream_t *subs, unsigned int period_by else subs->curpacksize = maxsize; - if (snd_usb_get_speed(subs->dev) == USB_SPEED_FULL) - urb_packs = nrpacks; + if (snd_usb_get_speed(subs->dev) == USB_SPEED_HIGH) + packs_per_ms = 8 >> subs->datainterval; else - urb_packs = (nrpacks * 8) >> subs->datainterval; + packs_per_ms = 1; + subs->packs_per_ms = packs_per_ms; - /* allocate a temporary buffer for playback */ if (is_playback) { - subs->tmpbuf = kmalloc(maxsize * urb_packs, GFP_KERNEL); - if (! subs->tmpbuf) { - snd_printk(KERN_ERR "cannot malloc tmpbuf\n"); - return -ENOMEM; - } - } + urb_packs = nrpacks; + urb_packs = max(urb_packs, (unsigned int)MIN_PACKS_URB); + urb_packs = min(urb_packs, (unsigned int)MAX_PACKS); + } else + urb_packs = 1; + urb_packs *= packs_per_ms; /* decide how many packets to be used */ - total_packs = (period_bytes + maxsize - 1) / maxsize; - if (total_packs < 2 * MIN_PACKS_URB) - total_packs = 2 * MIN_PACKS_URB; + if (is_playback) { + unsigned int minsize; + /* determine how small a packet can be */ + minsize = (subs->freqn >> (16 - subs->datainterval)) + * (frame_bits >> 3); + /* with sync from device, assume it can be 12% lower */ + if (subs->syncpipe) + minsize -= minsize >> 3; + minsize = max(minsize, 1u); + total_packs = (period_bytes + minsize - 1) / minsize; + /* round up to multiple of packs_per_ms */ + total_packs = (total_packs + packs_per_ms - 1) + & ~(packs_per_ms - 1); + /* we need at least two URBs for queueing */ + if (total_packs < 2 * MIN_PACKS_URB * packs_per_ms) + total_packs = 2 * MIN_PACKS_URB * packs_per_ms; + } else { + total_packs = MAX_URBS * urb_packs; + } subs->nurbs = (total_packs + urb_packs - 1) / urb_packs; if (subs->nurbs > MAX_URBS) { /* too much... */ @@ -956,7 +1011,7 @@ static int init_substream_urbs(snd_usb_substream_t *subs, unsigned int period_by subs->nurbs = 2; npacks[0] = (total_packs + 1) / 2; npacks[1] = total_packs - npacks[0]; - } else if (npacks[subs->nurbs-1] < MIN_PACKS_URB) { + } else if (npacks[subs->nurbs-1] < MIN_PACKS_URB * packs_per_ms) { /* the last packet is too small.. */ if (subs->nurbs > 2) { /* merge to the first one */ @@ -975,27 +1030,20 @@ static int init_substream_urbs(snd_usb_substream_t *subs, unsigned int period_by snd_urb_ctx_t *u = &subs->dataurb[i]; u->index = i; u->subs = subs; - u->transfer = 0; u->packets = npacks[i]; + u->buffer_size = maxsize * u->packets; if (subs->fmt_type == USB_FORMAT_TYPE_II) u->packets++; /* for transfer delimiter */ - if (! is_playback) { - /* allocate a capture buffer per urb */ - u->buf = kmalloc(maxsize * u->packets, GFP_KERNEL); - if (! u->buf) { - release_substream_urbs(subs, 0); - return -ENOMEM; - } - } u->urb = usb_alloc_urb(u->packets, GFP_KERNEL); - if (! u->urb) { - release_substream_urbs(subs, 0); - return -ENOMEM; - } - u->urb->dev = subs->dev; + if (! u->urb) + goto out_of_memory; + u->urb->transfer_buffer = + usb_buffer_alloc(subs->dev, u->buffer_size, GFP_KERNEL, + &u->urb->transfer_dma); + if (! u->urb->transfer_buffer) + goto out_of_memory; u->urb->pipe = subs->datapipe; - u->urb->transfer_flags = URB_ISO_ASAP; - u->urb->number_of_packets = u->packets; + u->urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP; u->urb->interval = 1 << subs->datainterval; u->urb->context = u; u->urb->complete = snd_usb_complete_callback(snd_complete_urb); @@ -1003,21 +1051,24 @@ static int init_substream_urbs(snd_usb_substream_t *subs, unsigned int period_by if (subs->syncpipe) { /* allocate and initialize sync urbs */ + subs->syncbuf = usb_buffer_alloc(subs->dev, SYNC_URBS * 4, + GFP_KERNEL, &subs->sync_dma); + if (! subs->syncbuf) + goto out_of_memory; for (i = 0; i < SYNC_URBS; i++) { snd_urb_ctx_t *u = &subs->syncurb[i]; u->index = i; u->subs = subs; u->packets = 1; u->urb = usb_alloc_urb(1, GFP_KERNEL); - if (! u->urb) { - release_substream_urbs(subs, 0); - return -ENOMEM; - } + if (! u->urb) + goto out_of_memory; u->urb->transfer_buffer = subs->syncbuf + i * 4; + u->urb->transfer_dma = subs->sync_dma + i * 4; u->urb->transfer_buffer_length = 4; - u->urb->dev = subs->dev; u->urb->pipe = subs->syncpipe; - u->urb->transfer_flags = URB_ISO_ASAP; + u->urb->transfer_flags = URB_ISO_ASAP | + URB_NO_TRANSFER_DMA_MAP; u->urb->number_of_packets = 1; u->urb->interval = 1 << subs->syncinterval; u->urb->context = u; @@ -1025,6 +1076,10 @@ static int init_substream_urbs(snd_usb_substream_t *subs, unsigned int period_by } } return 0; + +out_of_memory: + release_substream_urbs(subs, 0); + return -ENOMEM; } @@ -1293,7 +1348,8 @@ static int snd_usb_hw_params(snd_pcm_substream_t *substream, unsigned int channels, rate, format; int ret, changed; - ret = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(hw_params)); + ret = snd_pcm_alloc_vmalloc_buffer(substream, + params_buffer_bytes(hw_params)); if (ret < 0) return ret; @@ -1349,7 +1405,7 @@ static int snd_usb_hw_free(snd_pcm_substream_t *substream) subs->cur_rate = 0; subs->period_bytes = 0; release_substream_urbs(subs, 0); - return snd_pcm_lib_free_pages(substream); + return snd_pcm_free_vmalloc_buffer(substream); } /* @@ -1372,9 +1428,7 @@ static int snd_usb_pcm_prepare(snd_pcm_substream_t *substream) subs->curframesize = bytes_to_frames(runtime, subs->curpacksize); /* reset the pointer */ - subs->hwptr = 0; subs->hwptr_done = 0; - subs->transfer_sched = 0; subs->transfer_done = 0; subs->phase = 0; @@ -1390,7 +1444,7 @@ static snd_pcm_hardware_t snd_usb_playback = .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP_VALID), - .buffer_bytes_max = (128*1024), + .buffer_bytes_max = (256*1024), .period_bytes_min = 64, .period_bytes_max = (128*1024), .periods_min = 2, @@ -1402,7 +1456,7 @@ static snd_pcm_hardware_t snd_usb_capture = .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP_VALID), - .buffer_bytes_max = (128*1024), + .buffer_bytes_max = (256*1024), .period_bytes_min = 64, .period_bytes_max = (128*1024), .periods_min = 2, @@ -1794,6 +1848,7 @@ static snd_pcm_ops_t snd_usb_playback_ops = { .prepare = snd_usb_pcm_prepare, .trigger = snd_usb_pcm_trigger, .pointer = snd_usb_pcm_pointer, + .page = snd_pcm_get_vmalloc_page, }; static snd_pcm_ops_t snd_usb_capture_ops = { @@ -1805,6 +1860,7 @@ static snd_pcm_ops_t snd_usb_capture_ops = { .prepare = snd_usb_pcm_prepare, .trigger = snd_usb_pcm_trigger, .pointer = snd_usb_pcm_pointer, + .page = snd_pcm_get_vmalloc_page, }; @@ -2021,6 +2077,9 @@ static void init_substream(snd_usb_stream_t *as, int stream, struct audioformat INIT_LIST_HEAD(&subs->fmt_list); spin_lock_init(&subs->lock); + if (stream == SNDRV_PCM_STREAM_PLAYBACK) + tasklet_init(&subs->start_period_elapsed, start_period_elapsed, + (unsigned long)subs); subs->stream = as; subs->direction = stream; @@ -2029,10 +2088,6 @@ static void init_substream(snd_usb_stream_t *as, int stream, struct audioformat subs->ops = audio_urb_ops[stream]; else subs->ops = audio_urb_ops_high_speed[stream]; - snd_pcm_lib_preallocate_pages(as->pcm->streams[stream].substream, - SNDRV_DMA_TYPE_CONTINUOUS, - snd_dma_continuous_data(GFP_KERNEL), - 64 * 1024, 128 * 1024); snd_pcm_set_ops(as->pcm, stream, stream == SNDRV_PCM_STREAM_PLAYBACK ? &snd_usb_playback_ops : &snd_usb_capture_ops); @@ -2078,7 +2133,6 @@ static void snd_usb_audio_pcm_free(snd_pcm_t *pcm) snd_usb_stream_t *stream = pcm->private_data; if (stream) { stream->pcm = NULL; - snd_pcm_lib_preallocate_free_for_all(pcm); snd_usb_audio_stream_free(stream); } } diff --git a/sound/usb/usbmidi.c b/sound/usb/usbmidi.c index 5778a9b725ec..93dedde3c428 100644 --- a/sound/usb/usbmidi.c +++ b/sound/usb/usbmidi.c @@ -44,6 +44,7 @@ #include <linux/string.h> #include <linux/init.h> #include <linux/slab.h> +#include <linux/timer.h> #include <linux/usb.h> #include <sound/core.h> #include <sound/minors.h> @@ -56,6 +57,12 @@ */ /* #define DUMP_PACKETS */ +/* + * how long to wait after some USB errors, so that khubd can disconnect() us + * without too many spurious errors + */ +#define ERROR_DELAY_JIFFIES (HZ / 10) + MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>"); MODULE_DESCRIPTION("USB Audio/MIDI helper module"); @@ -100,6 +107,7 @@ struct snd_usb_midi { snd_rawmidi_t* rmidi; struct usb_protocol_ops* usb_protocol_ops; struct list_head list; + struct timer_list error_timer; struct snd_usb_midi_endpoint { snd_usb_midi_out_endpoint_t *out; @@ -141,7 +149,8 @@ struct snd_usb_midi_in_endpoint { struct usbmidi_in_port { snd_rawmidi_substream_t* substream; } ports[0x10]; - int seen_f5; + u8 seen_f5; + u8 error_resubmit; int current_port; }; @@ -167,14 +176,22 @@ static int snd_usbmidi_submit_urb(struct urb* urb, int flags) */ static int snd_usbmidi_urb_error(int status) { - if (status == -ENOENT) - return status; /* killed */ - if (status == -EILSEQ || - status == -ECONNRESET || - status == -ETIMEDOUT) - return -ENODEV; /* device removed/shutdown */ - snd_printk(KERN_ERR "urb status %d\n", status); - return 0; /* continue */ + switch (status) { + /* manually unlinked, or device gone */ + case -ENOENT: + case -ECONNRESET: + case -ESHUTDOWN: + case -ENODEV: + return -ENODEV; + /* errors that might occur during unplugging */ + case -EPROTO: /* EHCI */ + case -ETIMEDOUT: /* OHCI */ + case -EILSEQ: /* UHCI */ + return -EIO; + default: + snd_printk(KERN_ERR "urb status %d\n", status); + return 0; /* continue */ + } } /* @@ -218,8 +235,15 @@ static void snd_usbmidi_in_urb_complete(struct urb* urb, struct pt_regs *regs) ep->umidi->usb_protocol_ops->input(ep, urb->transfer_buffer, urb->actual_length); } else { - if (snd_usbmidi_urb_error(urb->status) < 0) + int err = snd_usbmidi_urb_error(urb->status); + if (err < 0) { + if (err != -ENODEV) { + ep->error_resubmit = 1; + mod_timer(&ep->umidi->error_timer, + jiffies + ERROR_DELAY_JIFFIES); + } return; + } } if (usb_pipe_needs_resubmit(urb->pipe)) { @@ -236,8 +260,13 @@ static void snd_usbmidi_out_urb_complete(struct urb* urb, struct pt_regs *regs) ep->urb_active = 0; spin_unlock(&ep->buffer_lock); if (urb->status < 0) { - if (snd_usbmidi_urb_error(urb->status) < 0) + int err = snd_usbmidi_urb_error(urb->status); + if (err < 0) { + if (err != -ENODEV) + mod_timer(&ep->umidi->error_timer, + jiffies + ERROR_DELAY_JIFFIES); return; + } } snd_usbmidi_do_output(ep); } @@ -276,6 +305,24 @@ static void snd_usbmidi_out_tasklet(unsigned long data) snd_usbmidi_do_output(ep); } +/* called after transfers had been interrupted due to some USB error */ +static void snd_usbmidi_error_timer(unsigned long data) +{ + snd_usb_midi_t *umidi = (snd_usb_midi_t *)data; + int i; + + for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) { + snd_usb_midi_in_endpoint_t *in = umidi->endpoints[i].in; + if (in && in->error_resubmit) { + in->error_resubmit = 0; + in->urb->dev = umidi->chip->dev; + snd_usbmidi_submit_urb(in->urb, GFP_ATOMIC); + } + if (umidi->endpoints[i].out) + snd_usbmidi_do_output(umidi->endpoints[i].out); + } +} + /* helper function to send static data that may not DMA-able */ static int send_bulk_static_data(snd_usb_midi_out_endpoint_t* ep, const void *data, int len) @@ -594,17 +641,20 @@ static void snd_usbmidi_emagic_finish_out(snd_usb_midi_out_endpoint_t* ep) static void snd_usbmidi_emagic_input(snd_usb_midi_in_endpoint_t* ep, uint8_t* buffer, int buffer_length) { - /* ignore padding bytes at end of buffer */ - while (buffer_length > 0 && buffer[buffer_length - 1] == 0xff) - --buffer_length; + int i; + + /* FF indicates end of valid data */ + for (i = 0; i < buffer_length; ++i) + if (buffer[i] == 0xff) { + buffer_length = i; + break; + } /* handle F5 at end of last buffer */ if (ep->seen_f5) goto switch_port; while (buffer_length > 0) { - int i; - /* determine size of data until next F5 */ for (i = 0; i < buffer_length; ++i) if (buffer[i] == 0xf5) @@ -671,6 +721,10 @@ static void snd_usbmidi_emagic_output(snd_usb_midi_out_endpoint_t* ep) break; } } + if (buf_free < ep->max_transfer && buf_free > 0) { + *buf = 0xff; + --buf_free; + } ep->urb->transfer_buffer_length = ep->max_transfer - buf_free; } @@ -765,7 +819,10 @@ static snd_rawmidi_ops_t snd_usbmidi_input_ops = { static void snd_usbmidi_in_endpoint_delete(snd_usb_midi_in_endpoint_t* ep) { if (ep->urb) { - kfree(ep->urb->transfer_buffer); + usb_buffer_free(ep->umidi->chip->dev, + ep->urb->transfer_buffer_length, + ep->urb->transfer_buffer, + ep->urb->transfer_dma); usb_free_urb(ep->urb); } kfree(ep); @@ -799,7 +856,8 @@ static int snd_usbmidi_in_endpoint_create(snd_usb_midi_t* umidi, else pipe = usb_rcvbulkpipe(umidi->chip->dev, ep_info->in_ep); length = usb_maxpacket(umidi->chip->dev, pipe, 0); - buffer = kmalloc(length, GFP_KERNEL); + buffer = usb_buffer_alloc(umidi->chip->dev, length, GFP_KERNEL, + &ep->urb->transfer_dma); if (!buffer) { snd_usbmidi_in_endpoint_delete(ep); return -ENOMEM; @@ -812,6 +870,7 @@ static int snd_usbmidi_in_endpoint_create(snd_usb_midi_t* umidi, usb_fill_bulk_urb(ep->urb, umidi->chip->dev, pipe, buffer, length, snd_usb_complete_callback(snd_usbmidi_in_urb_complete), ep); + ep->urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP; rep->in = ep; return 0; @@ -832,10 +891,10 @@ static unsigned int snd_usbmidi_count_bits(unsigned int x) */ static void snd_usbmidi_out_endpoint_delete(snd_usb_midi_out_endpoint_t* ep) { - if (ep->tasklet.func) - tasklet_kill(&ep->tasklet); if (ep->urb) { - kfree(ep->urb->transfer_buffer); + usb_buffer_free(ep->umidi->chip->dev, ep->max_transfer, + ep->urb->transfer_buffer, + ep->urb->transfer_dma); usb_free_urb(ep->urb); } kfree(ep); @@ -867,7 +926,8 @@ static int snd_usbmidi_out_endpoint_create(snd_usb_midi_t* umidi, /* we never use interrupt output pipes */ pipe = usb_sndbulkpipe(umidi->chip->dev, ep_info->out_ep); ep->max_transfer = usb_maxpacket(umidi->chip->dev, pipe, 1); - buffer = kmalloc(ep->max_transfer, GFP_KERNEL); + buffer = usb_buffer_alloc(umidi->chip->dev, ep->max_transfer, + GFP_KERNEL, &ep->urb->transfer_dma); if (!buffer) { snd_usbmidi_out_endpoint_delete(ep); return -ENOMEM; @@ -875,6 +935,7 @@ static int snd_usbmidi_out_endpoint_create(snd_usb_midi_t* umidi, usb_fill_bulk_urb(ep->urb, umidi->chip->dev, pipe, buffer, ep->max_transfer, snd_usb_complete_callback(snd_usbmidi_out_urb_complete), ep); + ep->urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP; spin_lock_init(&ep->buffer_lock); tasklet_init(&ep->tasklet, snd_usbmidi_out_tasklet, (unsigned long)ep); @@ -918,8 +979,11 @@ void snd_usbmidi_disconnect(struct list_head* p) int i; umidi = list_entry(p, snd_usb_midi_t, list); + del_timer_sync(&umidi->error_timer); for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) { snd_usb_midi_endpoint_t* ep = &umidi->endpoints[i]; + if (ep->out) + tasklet_kill(&ep->out->tasklet); if (ep->out && ep->out->urb) { usb_kill_urb(ep->out->urb); if (umidi->usb_protocol_ops->finish_out_endpoint) @@ -1480,6 +1544,9 @@ int snd_usb_create_midi_interface(snd_usb_audio_t* chip, umidi->iface = iface; umidi->quirk = quirk; umidi->usb_protocol_ops = &snd_usbmidi_standard_ops; + init_timer(&umidi->error_timer); + umidi->error_timer.function = snd_usbmidi_error_timer; + umidi->error_timer.data = (unsigned long)umidi; /* detect the endpoint(s) to use */ memset(endpoints, 0, sizeof(endpoints)); diff --git a/sound/usb/usx2y/usx2yhwdeppcm.c b/sound/usb/usx2y/usx2yhwdeppcm.c index ef28061287f2..d0199c4e5551 100644 --- a/sound/usb/usx2y/usx2yhwdeppcm.c +++ b/sound/usb/usx2y/usx2yhwdeppcm.c @@ -624,7 +624,7 @@ static int usX2Y_pcms_lock_check(snd_card_t *card) for (s = 0; s < 2; ++s) { snd_pcm_substream_t *substream; substream = pcm->streams[s].substream; - if (substream && substream->open_flag) + if (substream && substream->ffile != NULL) err = -EBUSY; } } |