diff options
| -rw-r--r-- | Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt | 21 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/vendor-prefixes.txt | 1 | ||||
| -rw-r--r-- | Documentation/input/alps.txt | 57 | ||||
| -rw-r--r-- | Documentation/kernel-parameters.txt | 9 | ||||
| -rw-r--r-- | MAINTAINERS | 7 | ||||
| -rw-r--r-- | drivers/input/mouse/alps.c | 87 | ||||
| -rw-r--r-- | drivers/input/mouse/alps.h | 2 | ||||
| -rw-r--r-- | drivers/input/mouse/elantech.c | 27 | ||||
| -rw-r--r-- | drivers/input/rmi4/rmi_i2c.c | 38 | ||||
| -rw-r--r-- | drivers/input/rmi4/rmi_spi.c | 22 | ||||
| -rw-r--r-- | drivers/input/serio/i8042-io.h | 2 | ||||
| -rw-r--r-- | drivers/input/serio/i8042-ip22io.h | 2 | ||||
| -rw-r--r-- | drivers/input/serio/i8042-ppcio.h | 2 | ||||
| -rw-r--r-- | drivers/input/serio/i8042-sparcio.h | 2 | ||||
| -rw-r--r-- | drivers/input/serio/i8042-unicore32io.h | 2 | ||||
| -rw-r--r-- | drivers/input/serio/i8042-x86ia64io.h | 96 | ||||
| -rw-r--r-- | drivers/input/serio/i8042.c | 55 | ||||
| -rw-r--r-- | drivers/input/touchscreen/melfas_mip4.c | 38 |
18 files changed, 411 insertions, 59 deletions
diff --git a/Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt b/Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt new file mode 100644 index 000000000000..7b8944c2cb31 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt @@ -0,0 +1,21 @@ +* MELFAS MIP4 Touchscreen + +Required properties: +- compatible: must be "melfas,mip4_ts" +- reg: I2C slave address of the chip (0x48 or 0x34) +- interrupt-parent: interrupt controller to which the chip is connected +- interrupts: interrupt to which the chip is connected + +Optional properties: +- ce-gpios: GPIO connected to the CE (chip enable) pin of the chip + +Example: + i2c@00000000 { + touchscreen: melfas_mip4@48 { + compatible = "melfas,mip4_ts"; + reg = <0x48>; + interrupt-parent = <&gpio>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + ce-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index caf0798908e2..f0a48ea78659 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -163,6 +163,7 @@ maxim Maxim Integrated Products meas Measurement Specialties mediatek MediaTek Inc. melexis Melexis N.V. +melfas MELFAS Inc. merrii Merrii Technology Co., Ltd. micrel Micrel Inc. microchip Microchip Technology Inc. diff --git a/Documentation/input/alps.txt b/Documentation/input/alps.txt index 1fec1135791d..8d1341ccde64 100644 --- a/Documentation/input/alps.txt +++ b/Documentation/input/alps.txt @@ -319,3 +319,60 @@ For touchpad packet, the format is: otherwise byte 0 bit 4 must be set and byte 0/4/5 are in NEW fmt F: Number of fingers - 3, 0 means 3 fingers, 1 means 4 ... + + +ALPS Absolute Mode - Protocol Version 8 +--------------------------------------- + +Spoken by SS4 (73 03 14) and SS5 (73 03 28) hardware. + +The packet type is given by the APD field, bits 4-5 of byte 3. + +Touchpad packet (APD = 0x2): + + b7 b6 b5 b4 b3 b2 b1 b0 + byte 0: SWM SWR SWL 1 1 0 0 X7 + byte 1: 0 X6 X5 X4 X3 X2 X1 X0 + byte 2: 0 Y6 Y5 Y4 Y3 Y2 Y1 Y0 + byte 3: 0 T&P 1 0 1 0 0 Y7 + byte 4: 0 Z6 Z5 Z4 Z3 Z2 Z1 Z0 + byte 5: 0 0 0 0 0 0 0 0 + +SWM, SWR, SWL: Middle, Right, and Left button states + +Touchpad 1 Finger packet (APD = 0x0): + + b7 b6 b5 b4 b3 b2 b1 b0 + byte 0: SWM SWR SWL 1 1 X2 X1 X0 + byte 1: X9 X8 X7 1 X6 X5 X4 X3 + byte 2: 0 X11 X10 LFB Y3 Y2 Y1 Y0 + byte 3: Y5 Y4 0 0 1 TAPF2 TAPF1 TAPF0 + byte 4: Zv7 Y11 Y10 1 Y9 Y8 Y7 Y6 + byte 5: Zv6 Zv5 Zv4 0 Zv3 Zv2 Zv1 Zv0 + +TAPF: ??? +LFB: ??? + +Touchpad 2 Finger packet (APD = 0x1): + + b7 b6 b5 b4 b3 b2 b1 b0 + byte 0: SWM SWR SWL 1 1 AX6 AX5 AX4 + byte 1: AX11 AX10 AX9 AX8 AX7 AZ1 AY4 AZ0 + byte 2: AY11 AY10 AY9 CONT AY8 AY7 AY6 AY5 + byte 3: 0 0 0 1 1 BX6 BX5 BX4 + byte 4: BX11 BX10 BX9 BX8 BX7 BZ1 BY4 BZ0 + byte 5: BY11 BY10 BY9 0 BY8 BY7 BY5 BY5 + +CONT: A 3-or-4 Finger packet is to follow + +Touchpad 3-or-4 Finger packet (APD = 0x3): + + b7 b6 b5 b4 b3 b2 b1 b0 + byte 0: SWM SWR SWL 1 1 AX6 AX5 AX4 + byte 1: AX11 AX10 AX9 AX8 AX7 AZ1 AY4 AZ0 + byte 2: AY11 AY10 AY9 OVF AY8 AY7 AY6 AY5 + byte 3: 0 0 1 1 1 BX6 BX5 BX4 + byte 4: BX11 BX10 BX9 BX8 BX7 BZ1 BY4 BZ0 + byte 5: BY11 BY10 BY9 0 BY8 BY7 BY5 BY5 + +OVF: 5th finger detected diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 58f3c1041759..37babf91f2cb 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1511,7 +1511,14 @@ bytes respectively. Such letter suffixes can also be entirely omitted. i8042.nopnp [HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX controllers i8042.notimeout [HW] Ignore timeout condition signalled by controller - i8042.reset [HW] Reset the controller during init and cleanup + i8042.reset [HW] Reset the controller during init, cleanup and + suspend-to-ram transitions, only during s2r + transitions, or never reset + Format: { 1 | Y | y | 0 | N | n } + 1, Y, y: always reset controller + 0, N, n: don't ever reset controller + Default: only on s2r transitions on x86; most other + architectures force reset to be always executed i8042.unlock [HW] Unlock (ignore) the keylock i8042.kbdreset [HW] Reset device connected to KBD port diff --git a/MAINTAINERS b/MAINTAINERS index 146d1498aa01..a452c404141d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7829,6 +7829,13 @@ F: Documentation/scsi/megaraid.txt F: drivers/scsi/megaraid.* F: drivers/scsi/megaraid/ +MELFAS MIP4 TOUCHSCREEN DRIVER +M: Sangwon Jee <jeesw@melfas.com> +W: http://www.melfas.com +S: Supported +F: drivers/input/touchscreen/melfas_mip4.c +F: Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt + MELLANOX ETHERNET DRIVER (mlx4_en) M: Tariq Toukan <tariqt@mellanox.com> L: netdev@vger.kernel.org diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 936f07a4e35f..6d7de9bfed9a 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -103,6 +103,7 @@ static const struct alps_nibble_commands alps_v6_nibble_commands[] = { 6-byte ALPS packet */ #define ALPS_STICK_BITS 0x100 /* separate stick button bits */ #define ALPS_BUTTONPAD 0x200 /* device is a clickpad */ +#define ALPS_DUALPOINT_WITH_PRESSURE 0x400 /* device can report trackpoint pressure */ static const struct alps_model_info alps_model_data[] = { { { 0x32, 0x02, 0x14 }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT } }, /* Toshiba Salellite Pro M10 */ @@ -1156,15 +1157,28 @@ static unsigned char alps_get_pkt_id_ss4_v2(unsigned char *byte) { unsigned char pkt_id = SS4_PACKET_ID_IDLE; - if (byte[0] == 0x18 && byte[1] == 0x10 && byte[2] == 0x00 && - (byte[3] & 0x88) == 0x08 && byte[4] == 0x10 && byte[5] == 0x00) { - pkt_id = SS4_PACKET_ID_IDLE; - } else if (!(byte[3] & 0x10)) { - pkt_id = SS4_PACKET_ID_ONE; - } else if (!(byte[3] & 0x20)) { + switch (byte[3] & 0x30) { + case 0x00: + if (byte[0] == 0x18 && byte[1] == 0x10 && byte[2] == 0x00 && + (byte[3] & 0x88) == 0x08 && byte[4] == 0x10 && + byte[5] == 0x00) { + pkt_id = SS4_PACKET_ID_IDLE; + } else { + pkt_id = SS4_PACKET_ID_ONE; + } + break; + case 0x10: + /* two-finger finger positions */ pkt_id = SS4_PACKET_ID_TWO; - } else { + break; + case 0x20: + /* stick pointer */ + pkt_id = SS4_PACKET_ID_STICK; + break; + case 0x30: + /* third and fourth finger positions */ pkt_id = SS4_PACKET_ID_MULTI; + break; } return pkt_id; @@ -1185,7 +1199,13 @@ static int alps_decode_ss4_v2(struct alps_fields *f, f->mt[0].x = SS4_1F_X_V2(p); f->mt[0].y = SS4_1F_Y_V2(p); f->pressure = ((SS4_1F_Z_V2(p)) * 2) & 0x7f; - f->fingers = 1; + /* + * When a button is held the device will give us events + * with x, y, and pressure of 0. This causes annoying jumps + * if a touch is released while the button is held. + * Handle this by claiming zero contacts. + */ + f->fingers = f->pressure > 0 ? 1 : 0; f->first_mp = 0; f->is_mp = 0; break; @@ -1246,16 +1266,40 @@ static int alps_decode_ss4_v2(struct alps_fields *f, } break; + case SS4_PACKET_ID_STICK: + if (!(priv->flags & ALPS_DUALPOINT)) { + psmouse_warn(psmouse, + "Rejected trackstick packet from non DualPoint device"); + } else { + int x = (s8)(((p[0] & 1) << 7) | (p[1] & 0x7f)); + int y = (s8)(((p[3] & 1) << 7) | (p[2] & 0x7f)); + int pressure = (s8)(p[4] & 0x7f); + + input_report_rel(priv->dev2, REL_X, x); + input_report_rel(priv->dev2, REL_Y, -y); + input_report_abs(priv->dev2, ABS_PRESSURE, pressure); + } + break; + case SS4_PACKET_ID_IDLE: default: memset(f, 0, sizeof(struct alps_fields)); break; } - f->left = !!(SS4_BTN_V2(p) & 0x01); - if (!(priv->flags & ALPS_BUTTONPAD)) { - f->right = !!(SS4_BTN_V2(p) & 0x02); - f->middle = !!(SS4_BTN_V2(p) & 0x04); + /* handle buttons */ + if (pkt_id == SS4_PACKET_ID_STICK) { + f->ts_left = !!(SS4_BTN_V2(p) & 0x01); + if (!(priv->flags & ALPS_BUTTONPAD)) { + f->ts_right = !!(SS4_BTN_V2(p) & 0x02); + f->ts_middle = !!(SS4_BTN_V2(p) & 0x04); + } + } else { + f->left = !!(SS4_BTN_V2(p) & 0x01); + if (!(priv->flags & ALPS_BUTTONPAD)) { + f->right = !!(SS4_BTN_V2(p) & 0x02); + f->middle = !!(SS4_BTN_V2(p) & 0x04); + } } return 0; @@ -1266,6 +1310,7 @@ static void alps_process_packet_ss4_v2(struct psmouse *psmouse) struct alps_data *priv = psmouse->private; unsigned char *packet = psmouse->packet; struct input_dev *dev = psmouse->dev; + struct input_dev *dev2 = priv->dev2; struct alps_fields *f = &priv->f; memset(f, 0, sizeof(struct alps_fields)); @@ -1311,6 +1356,13 @@ static void alps_process_packet_ss4_v2(struct psmouse *psmouse) input_report_abs(dev, ABS_PRESSURE, f->pressure); input_sync(dev); + + if (priv->flags & ALPS_DUALPOINT) { + input_report_key(dev2, BTN_LEFT, f->ts_left); + input_report_key(dev2, BTN_RIGHT, f->ts_right); + input_report_key(dev2, BTN_MIDDLE, f->ts_middle); + input_sync(dev2); + } } static bool alps_is_valid_package_ss4_v2(struct psmouse *psmouse) @@ -2695,6 +2747,10 @@ static int alps_set_protocol(struct psmouse *psmouse, if (alps_set_defaults_ss4_v2(psmouse, priv)) return -EIO; + if (priv->fw_ver[1] == 0x1) + priv->flags |= ALPS_DUALPOINT | + ALPS_DUALPOINT_WITH_PRESSURE; + break; } @@ -2767,6 +2823,9 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv) } else if (e7[0] == 0x73 && e7[1] == 0x03 && e7[2] == 0x14 && ec[1] == 0x02) { protocol = &alps_v8_protocol_data; + } else if (e7[0] == 0x73 && e7[1] == 0x03 && + e7[2] == 0x28 && ec[1] == 0x01) { + protocol = &alps_v8_protocol_data; } else { psmouse_dbg(psmouse, "Likely not an ALPS touchpad: E7=%3ph, EC=%3ph\n", e7, ec); @@ -2949,6 +3008,10 @@ int alps_init(struct psmouse *psmouse) input_set_capability(dev2, EV_REL, REL_X); input_set_capability(dev2, EV_REL, REL_Y); + if (priv->flags & ALPS_DUALPOINT_WITH_PRESSURE) { + input_set_capability(dev2, EV_ABS, ABS_PRESSURE); + input_set_abs_params(dev2, ABS_PRESSURE, 0, 127, 0, 0); + } input_set_capability(dev2, EV_KEY, BTN_LEFT); input_set_capability(dev2, EV_KEY, BTN_RIGHT); input_set_capability(dev2, EV_KEY, BTN_MIDDLE); diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h index d37f814dc447..b9417e2d7ad3 100644 --- a/drivers/input/mouse/alps.h +++ b/drivers/input/mouse/alps.h @@ -37,12 +37,14 @@ * or there's button activities. * SS4_PACKET_ID_TWO: There's two or more fingers on touchpad * SS4_PACKET_ID_MULTI: There's three or more fingers on touchpad + * SS4_PACKET_ID_STICK: A stick pointer packet */ enum SS4_PACKET_ID { SS4_PACKET_ID_IDLE = 0, SS4_PACKET_ID_ONE, SS4_PACKET_ID_TWO, SS4_PACKET_ID_MULTI, + SS4_PACKET_ID_STICK, }; #define SS4_COUNT_PER_ELECTRODE 256 diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 08e252a42480..db7d1d666ac1 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -1134,7 +1134,7 @@ static int elantech_get_resolution_v4(struct psmouse *psmouse, * System76 Pangolin 0x250f01 ? 2 hw buttons * (*) + 3 trackpoint buttons * (**) + 0 trackpoint buttons - * Note: Lenovo L430 and Lenovo L430 have the same fw_version/caps + * Note: Lenovo L430 and Lenovo L530 have the same fw_version/caps */ static void elantech_set_buttonpad_prop(struct psmouse *psmouse) { @@ -1159,6 +1159,13 @@ static const struct dmi_system_id elantech_dmi_has_middle_button[] = { DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS H730"), }, }, + { + /* Fujitsu H760 also has a middle button */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS H760"), + }, + }, #endif { } }; @@ -1503,10 +1510,10 @@ static const struct dmi_system_id elantech_dmi_force_crc_enabled[] = { }, }, { - /* Fujitsu LIFEBOOK E554 does not work with crc_enabled == 0 */ + /* Fujitsu H760 does not work with crc_enabled == 0 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), - DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E554"), + DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS H760"), }, }, { @@ -1517,6 +1524,20 @@ static const struct dmi_system_id elantech_dmi_force_crc_enabled[] = { }, }, { + /* Fujitsu LIFEBOOK E554 does not work with crc_enabled == 0 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E554"), + }, + }, + { + /* Fujitsu LIFEBOOK E556 does not work with crc_enabled == 0 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E556"), + }, + }, + { /* Fujitsu LIFEBOOK U745 does not work with crc_enabled == 0 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), diff --git a/drivers/input/rmi4/rmi_i2c.c b/drivers/input/rmi4/rmi_i2c.c index 6f2e0e4f0296..1ebc2c1debae 100644 --- a/drivers/input/rmi4/rmi_i2c.c +++ b/drivers/input/rmi4/rmi_i2c.c @@ -221,6 +221,21 @@ static const struct of_device_id rmi_i2c_of_match[] = { MODULE_DEVICE_TABLE(of, rmi_i2c_of_match); #endif +static void rmi_i2c_regulator_bulk_disable(void *data) +{ + struct rmi_i2c_xport *rmi_i2c = data; + + regulator_bulk_disable(ARRAY_SIZE(rmi_i2c->supplies), + rmi_i2c->supplies); +} + +static void rmi_i2c_unregister_transport(void *data) +{ + struct rmi_i2c_xport *rmi_i2c = data; + + rmi_unregister_transport_device(&rmi_i2c->xport); +} + static int rmi_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -264,6 +279,12 @@ static int rmi_i2c_probe(struct i2c_client *client, if (retval < 0) return retval; + retval = devm_add_action_or_reset(&client->dev, + rmi_i2c_regulator_bulk_disable, + rmi_i2c); + if (retval) + return retval; + of_property_read_u32(client->dev.of_node, "syna,startup-delay-ms", &rmi_i2c->startup_delay); @@ -294,6 +315,11 @@ static int rmi_i2c_probe(struct i2c_client *client, client->addr); return retval; } + retval = devm_add_action_or_reset(&client->dev, + rmi_i2c_unregister_transport, + rmi_i2c); + if (retval) + return retval; retval = rmi_i2c_init_irq(client); if (retval < 0) @@ -304,17 +330,6 @@ static int rmi_i2c_probe(struct i2c_client *client, return 0; } -static int rmi_i2c_remove(struct i2c_client *client) -{ - struct rmi_i2c_xport *rmi_i2c = i2c_get_clientdata(client); - - rmi_unregister_transport_device(&rmi_i2c->xport); - regulator_bulk_disable(ARRAY_SIZE(rmi_i2c->supplies), - rmi_i2c->supplies); - - return 0; -} - #ifdef CONFIG_PM_SLEEP static int rmi_i2c_suspend(struct device *dev) { @@ -431,7 +446,6 @@ static struct i2c_driver rmi_i2c_driver = { }, .id_table = rmi_id, .probe = rmi_i2c_probe, - .remove = rmi_i2c_remove, }; module_i2c_driver(rmi_i2c_driver); diff --git a/drivers/input/rmi4/rmi_spi.c b/drivers/input/rmi4/rmi_spi.c index 55bd1b34970c..4ebef607e214 100644 --- a/drivers/input/rmi4/rmi_spi.c +++ b/drivers/input/rmi4/rmi_spi.c @@ -396,6 +396,13 @@ static inline int rmi_spi_of_probe(struct spi_device *spi, } #endif +static void rmi_spi_unregister_transport(void *data) +{ + struct rmi_spi_xport *rmi_spi = data; + + rmi_unregister_transport_device(&rmi_spi->xport); +} + static int rmi_spi_probe(struct spi_device *spi) { struct rmi_spi_xport *rmi_spi; @@ -464,6 +471,11 @@ static int rmi_spi_probe(struct spi_device *spi) dev_err(&spi->dev, "failed to register transport.\n"); return retval; } + retval = devm_add_action_or_reset(&spi->dev, + rmi_spi_unregister_transport, + rmi_spi); + if (retval) + return retval; retval = rmi_spi_init_irq(spi); if (retval < 0) @@ -473,15 +485,6 @@ static int rmi_spi_probe(struct spi_device *spi) return 0; } -static int rmi_spi_remove(struct spi_device *spi) -{ - struct rmi_spi_xport *rmi_spi = spi_get_drvdata(spi); - - rmi_unregister_transport_device(&rmi_spi->xport); - - return 0; -} - #ifdef CONFIG_PM_SLEEP static int rmi_spi_suspend(struct device *dev) { @@ -577,7 +580,6 @@ static struct spi_driver rmi_spi_driver = { }, .id_table = rmi_id, .probe = rmi_spi_probe, - .remove = rmi_spi_remove, }; module_spi_driver(rmi_spi_driver); diff --git a/drivers/input/serio/i8042-io.h b/drivers/input/serio/i8042-io.h index a5eed2ade53d..34da81c006b6 100644 --- a/drivers/input/serio/i8042-io.h +++ b/drivers/input/serio/i8042-io.h @@ -81,7 +81,7 @@ static inline int i8042_platform_init(void) return -EBUSY; #endif - i8042_reset = 1; + i8042_reset = I8042_RESET_ALWAYS; return 0; } diff --git a/drivers/input/serio/i8042-ip22io.h b/drivers/input/serio/i8042-ip22io.h index ee1ad27d6ed0..08a1c10a1448 100644 --- a/drivers/input/serio/i8042-ip22io.h +++ b/drivers/input/serio/i8042-ip22io.h @@ -61,7 +61,7 @@ static inline int i8042_platform_init(void) return -EBUSY; #endif - i8042_reset = 1; + i8042_reset = I8042_RESET_ALWAYS; return 0; } diff --git a/drivers/input/serio/i8042-ppcio.h b/drivers/input/serio/i8042-ppcio.h index f708c75d16f1..1aabea43329e 100644 --- a/drivers/input/serio/i8042-ppcio.h +++ b/drivers/input/serio/i8042-ppcio.h @@ -44,7 +44,7 @@ static inline void i8042_write_command(int val) static inline int i8042_platform_init(void) { - i8042_reset = 1; + i8042_reset = I8042_RESET_ALWAYS; return 0; } diff --git a/drivers/input/serio/i8042-sparcio.h b/drivers/input/serio/i8042-sparcio.h index afcd1c1a05b2..6231d63860ee 100644 --- a/drivers/input/serio/i8042-sparcio.h +++ b/drivers/input/serio/i8042-sparcio.h @@ -130,7 +130,7 @@ static int __init i8042_platform_init(void) } } - i8042_reset = 1; + i8042_reset = I8042_RESET_ALWAYS; return 0; } diff --git a/drivers/input/serio/i8042-unicore32io.h b/drivers/input/serio/i8042-unicore32io.h index 73f5cc124a36..455747552f85 100644 --- a/drivers/input/serio/i8042-unicore32io.h +++ b/drivers/input/serio/i8042-unicore32io.h @@ -61,7 +61,7 @@ static inline int i8042_platform_init(void) if (!request_mem_region(I8042_REGION_START, I8042_REGION_SIZE, "i8042")) return -EBUSY; - i8042_reset = 1; + i8042_reset = I8042_RESET_ALWAYS; return 0; } diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 68f5f4a0f1e7..f4bfb4b2d50a 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -510,6 +510,90 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = { { } }; +/* + * On some Asus laptops, just running self tests cause problems. + */ +static const struct dmi_system_id i8042_dmi_noselftest_table[] = { + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "A455LD"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "K401LB"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "K501LB"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "K501LX"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "R409L"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "V502LX"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "X302LA"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "X450LCP"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "X450LD"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "X455LAB"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "X455LDB"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "X455LF"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "Z450LA"), + }, + }, + { } +}; static const struct dmi_system_id __initconst i8042_dmi_reset_table[] = { { /* MSI Wind U-100 */ @@ -1072,12 +1156,18 @@ static int __init i8042_platform_init(void) return retval; #if defined(__ia64__) - i8042_reset = true; + i8042_reset = I8042_RESET_ALWAYS; #endif #ifdef CONFIG_X86 - if (dmi_check_system(i8042_dmi_reset_table)) - i8042_reset = true; + /* Honor module parameter when value is not default */ + if (i8042_reset == I8042_RESET_DEFAULT) { + if (dmi_check_system(i8042_dmi_reset_table)) + i8042_reset = I8042_RESET_ALWAYS; + + if (dmi_check_system(i8042_dmi_noselftest_table)) + i8042_reset = I8042_RESET_NEVER; + } if (dmi_check_system(i8042_dmi_noloop_table)) i8042_noloop = true; diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index 405252a884dd..89abfdb539ac 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -48,9 +48,39 @@ static bool i8042_unlock; module_param_named(unlock, i8042_unlock, bool, 0); MODULE_PARM_DESC(unlock, "Ignore keyboard lock."); -static bool i8042_reset; -module_param_named(reset, i8042_reset, bool, 0); -MODULE_PARM_DESC(reset, "Reset controller during init and cleanup."); +enum i8042_controller_reset_mode { + I8042_RESET_NEVER, + I8042_RESET_ALWAYS, + I8042_RESET_ON_S2RAM, +#define I8042_RESET_DEFAULT I8042_RESET_ON_S2RAM +}; +static enum i8042_controller_reset_mode i8042_reset = I8042_RESET_DEFAULT; +static int i8042_set_reset(const char *val, const struct kernel_param *kp) +{ + enum i8042_controller_reset_mode *arg = kp->arg; + int error; + bool reset; + + if (val) { + error = kstrtobool(val, &reset); + if (error) + return error; + } else { + reset = true; + } + + *arg = reset ? I8042_RESET_ALWAYS : I8042_RESET_NEVER; + return 0; +} + +static const struct kernel_param_ops param_ops_reset_param = { + .flags = KERNEL_PARAM_OPS_FL_NOARG, + .set = i8042_set_reset, +}; +#define param_check_reset_param(name, p) \ + __param_check(name, p, enum i8042_controller_reset_mode) +module_param_named(reset, i8042_reset, reset_param, 0); +MODULE_PARM_DESC(reset, "Reset controller on resume, cleanup or both"); static bool i8042_direct; module_param_named(direct, i8042_direct, bool, 0); @@ -1019,7 +1049,7 @@ static int i8042_controller_init(void) * Reset the controller and reset CRT to the original value set by BIOS. */ -static void i8042_controller_reset(bool force_reset) +static void i8042_controller_reset(bool s2r_wants_reset) { i8042_flush(); @@ -1044,8 +1074,10 @@ static void i8042_controller_reset(bool force_reset) * Reset the controller if requested. */ - if (i8042_reset || force_reset) + if (i8042_reset == I8042_RESET_ALWAYS || + (i8042_reset == I8042_RESET_ON_S2RAM && s2r_wants_reset)) { i8042_controller_selftest(); + } /* * Restore the original control register setting. @@ -1110,7 +1142,7 @@ static void i8042_dritek_enable(void) * before suspending. */ -static int i8042_controller_resume(bool force_reset) +static int i8042_controller_resume(bool s2r_wants_reset) { int error; @@ -1118,7 +1150,8 @@ static int i8042_controller_resume(bool force_reset) if (error) return error; - if (i8042_reset || force_reset) { + if (i8042_reset == I8042_RESET_ALWAYS || + (i8042_reset == I8042_RESET_ON_S2RAM && s2r_wants_reset)) { error = i8042_controller_selftest(); if (error) return error; @@ -1195,7 +1228,7 @@ static int i8042_pm_resume_noirq(struct device *dev) static int i8042_pm_resume(struct device *dev) { - bool force_reset; + bool want_reset; int i; for (i = 0; i < I8042_NUM_PORTS; i++) { @@ -1218,9 +1251,9 @@ static int i8042_pm_resume(struct device *dev) * off control to the platform firmware, otherwise we can simply restore * the mode. */ - force_reset = pm_resume_via_firmware(); + want_reset = pm_resume_via_firmware(); - return i8042_controller_resume(force_reset); + return i8042_controller_resume(want_reset); } static int i8042_pm_thaw(struct device *dev) @@ -1482,7 +1515,7 @@ static int __init i8042_probe(struct platform_device *dev) i8042_platform_device = dev; - if (i8042_reset) { + if (i8042_reset == I8042_RESET_ALWAYS) { error = i8042_controller_selftest(); if (error) return error; diff --git a/drivers/input/touchscreen/melfas_mip4.c b/drivers/input/touchscreen/melfas_mip4.c index fb5fb9140ca9..552a3773f79d 100644 --- a/drivers/input/touchscreen/melfas_mip4.c +++ b/drivers/input/touchscreen/melfas_mip4.c @@ -157,6 +157,7 @@ struct mip4_ts { char phys[32]; char product_name[16]; + char ic_name[4]; unsigned int max_x; unsigned int max_y; @@ -263,6 +264,18 @@ static int mip4_query_device(struct mip4_ts *ts) dev_dbg(&ts->client->dev, "product name: %.*s\n", (int)sizeof(ts->product_name), ts->product_name); + /* IC name */ + cmd[0] = MIP4_R0_INFO; + cmd[1] = MIP4_R1_INFO_IC_NAME; + error = mip4_i2c_xfer(ts, cmd, sizeof(cmd), + ts->ic_name, sizeof(ts->ic_name)); + if (error) + dev_warn(&ts->client->dev, + "Failed to retrieve IC name: %d\n", error); + else + dev_dbg(&ts->client->dev, "IC name: %.*s\n", + (int)sizeof(ts->ic_name), ts->ic_name); + /* Firmware version */ error = mip4_get_fw_version(ts); if (error) @@ -1326,7 +1339,7 @@ static ssize_t mip4_sysfs_read_hw_version(struct device *dev, * paired with current firmware in the chip. */ count = snprintf(buf, PAGE_SIZE, "%.*s\n", - (int)sizeof(ts->product_name), ts->product_name); + (int)sizeof(ts->product_name), ts->product_name); mutex_unlock(&ts->input->mutex); @@ -1335,9 +1348,30 @@ static ssize_t mip4_sysfs_read_hw_version(struct device *dev, static DEVICE_ATTR(hw_version, S_IRUGO, mip4_sysfs_read_hw_version, NULL); +static ssize_t mip4_sysfs_read_ic_name(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct mip4_ts *ts = i2c_get_clientdata(client); + size_t count; + + mutex_lock(&ts->input->mutex); + + count = snprintf(buf, PAGE_SIZE, "%.*s\n", + (int)sizeof(ts->ic_name), ts->ic_name); + + mutex_unlock(&ts->input->mutex); + + return count; +} + +static DEVICE_ATTR(ic_name, S_IRUGO, mip4_sysfs_read_ic_name, NULL); + static struct attribute *mip4_attrs[] = { &dev_attr_fw_version.attr, &dev_attr_hw_version.attr, + &dev_attr_ic_name.attr, &dev_attr_update_fw.attr, NULL, }; @@ -1538,6 +1572,6 @@ static struct i2c_driver mip4_driver = { module_i2c_driver(mip4_driver); MODULE_DESCRIPTION("MELFAS MIP4 Touchscreen"); -MODULE_VERSION("2016.03.12"); +MODULE_VERSION("2016.09.28"); MODULE_AUTHOR("Sangwon Jee <jeesw@melfas.com>"); MODULE_LICENSE("GPL"); |