diff options
53 files changed, 351 insertions, 183 deletions
diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.txt b/Documentation/devicetree/bindings/clock/imx23-clock.txt index baadbb11fe98..5083c0b834b2 100644 --- a/Documentation/devicetree/bindings/clock/imx23-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx23-clock.txt @@ -60,11 +60,6 @@ clks: clkctrl@80040000 { compatible = "fsl,imx23-clkctrl"; reg = <0x80040000 0x2000>; #clock-cells = <1>; - clock-output-names = - ... - "uart", /* 32 */ - ... - "end_of_list"; }; auart0: serial@8006c000 { diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.txt b/Documentation/devicetree/bindings/clock/imx25-clock.txt index c2a3525ecb4e..db4f2f05c4d0 100644 --- a/Documentation/devicetree/bindings/clock/imx25-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx25-clock.txt @@ -146,10 +146,6 @@ clks: ccm@53f80000 { compatible = "fsl,imx25-ccm"; reg = <0x53f80000 0x4000>; interrupts = <31>; - clock-output-names = ... - "uart_ipg", - "uart_serial", - ...; }; uart1: serial@43f90000 { diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.txt b/Documentation/devicetree/bindings/clock/imx28-clock.txt index 52a49a4a50b3..e6587af62ff0 100644 --- a/Documentation/devicetree/bindings/clock/imx28-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx28-clock.txt @@ -83,11 +83,6 @@ clks: clkctrl@80040000 { compatible = "fsl,imx28-clkctrl"; reg = <0x80040000 0x2000>; #clock-cells = <1>; - clock-output-names = - ... - "uart", /* 45 */ - ... - "end_of_list"; }; auart0: serial@8006a000 { diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt index d77b4e68dc42..f73fdf595568 100644 --- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt @@ -211,10 +211,6 @@ clks: ccm@020c4000 { reg = <0x020c4000 0x4000>; interrupts = <0 87 0x04 0 88 0x04>; #clock-cells = <1>; - clock-output-names = ... - "uart_ipg", - "uart_serial", - ...; }; uart1: serial@02020000 { diff --git a/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt b/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt index 558cdf3c9abc..d4eab9227ea4 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt @@ -1,4 +1,19 @@ -GPIO line that should be set high/low to power off a device +Driver a GPIO line that can be used to turn the power off. + +The driver supports both level triggered and edge triggered power off. +At driver load time, the driver will request the given gpio line and +install a pm_power_off handler. If the optional properties 'input' is +not found, the GPIO line will be driven in the inactive +state. Otherwise its configured as an input. + +When the pm_power_off is called, the gpio is configured as an output, +and drive active, so triggering a level triggered power off +condition. This will also cause an inactive->active edge condition, so +triggering positive edge triggered power off. After a delay of 100ms, +the GPIO is set to inactive, thus causing an active->inactive edge, +triggering negative edge triggered power off. After another 100ms +delay the GPIO is driver active again. If the power is still on and +the CPU still running after a 3000ms delay, a WARN_ON(1) is emitted. Required properties: - compatible : should be "gpio-poweroff". @@ -13,10 +28,9 @@ Optional properties: property is not specified, the GPIO is initialized as an output in its inactive state. - Examples: gpio-poweroff { compatible = "gpio-poweroff"; - gpios = <&gpio 4 0>; /* GPIO 4 Active Low */ + gpios = <&gpio 4 0>; }; diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index f95ba14ae3d0..ab864d9545dd 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -371,7 +371,6 @@ config ARCH_CNS3XXX config ARCH_CLPS711X bool "Cirrus Logic CLPS711x/EP721x/EP731x-based" select ARCH_REQUIRE_GPIOLIB - select ARCH_USES_GETTIMEOFFSET select AUTO_ZRELADDR select CLKDEV_LOOKUP select COMMON_CLK diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index cf6c48a09eac..4c0abe85405f 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -50,17 +50,19 @@ ranges; serial@d0012000 { - compatible = "ns16550"; + compatible = "snps,dw-apb-uart"; reg = <0xd0012000 0x100>; reg-shift = <2>; interrupts = <41>; + reg-io-width = <4>; status = "disabled"; }; serial@d0012100 { - compatible = "ns16550"; + compatible = "snps,dw-apb-uart"; reg = <0xd0012100 0x100>; reg-shift = <2>; interrupts = <42>; + reg-io-width = <4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index c45c7b4dc352..271855a6e224 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -34,7 +34,14 @@ reg = <0>; clocks = <&cpuclk 0>; }; - } + + cpu@1 { + device_type = "cpu"; + compatible = "marvell,sheeva-v7"; + reg = <1>; + clocks = <&cpuclk 1>; + }; + }; soc { pinctrl { diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index a2aee5707377..1c1937dbce73 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -85,5 +85,13 @@ #interrupts-cells = <2>; interrupts = <24>; }; + + ethernet@d0034000 { + compatible = "marvell,armada-370-neta"; + reg = <0xd0034000 0x2500>; + interrupts = <14>; + clocks = <&gateclk 1>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index da03a129243a..4905cf3a5ef8 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -100,5 +100,13 @@ #interrupts-cells = <2>; interrupts = <24>; }; + + ethernet@d0034000 { + compatible = "marvell,armada-370-neta"; + reg = <0xd0034000 0x2500>; + interrupts = <14>; + clocks = <&gateclk 1>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 367aa3f94912..2e37ef101c90 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -42,17 +42,19 @@ soc { serial@d0012200 { - compatible = "ns16550"; + compatible = "snps,dw-apb-uart"; reg = <0xd0012200 0x100>; reg-shift = <2>; interrupts = <43>; + reg-io-width = <4>; status = "disabled"; }; serial@d0012300 { - compatible = "ns16550"; + compatible = "snps,dw-apb-uart"; reg = <0xd0012300 0x100>; reg-shift = <2>; interrupts = <44>; + reg-io-width = <4>; status = "disabled"; }; @@ -93,14 +95,6 @@ status = "disabled"; }; - ethernet@d0034000 { - compatible = "marvell,armada-370-neta"; - reg = <0xd0034000 0x2500>; - interrupts = <14>; - clocks = <&gateclk 1>; - status = "disabled"; - }; - xor@d0060900 { compatible = "marvell,orion-xor"; reg = <0xd0060900 0x100 diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index f3f7e9d8adca..42eac1ff3cc8 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -117,6 +117,7 @@ pinctrl: pinctrl@d0200 { compatible = "marvell,dove-pinctrl"; reg = <0xd0200 0x10>; + clocks = <&gate_clk 22>; }; spi0: spi@10600 { diff --git a/arch/arm/boot/dts/ecx-2000.dts b/arch/arm/boot/dts/ecx-2000.dts index 46477ac1de99..139b40cc3a23 100644 --- a/arch/arm/boot/dts/ecx-2000.dts +++ b/arch/arm/boot/dts/ecx-2000.dts @@ -32,6 +32,7 @@ cpu@0 { compatible = "arm,cortex-a15"; + device_type = "cpu"; reg = <0>; clocks = <&a9pll>; clock-names = "cpu"; @@ -39,6 +40,7 @@ cpu@1 { compatible = "arm,cortex-a15"; + device_type = "cpu"; reg = <1>; clocks = <&a9pll>; clock-names = "cpu"; @@ -46,6 +48,7 @@ cpu@2 { compatible = "arm,cortex-a15"; + device_type = "cpu"; reg = <2>; clocks = <&a9pll>; clock-names = "cpu"; @@ -53,6 +56,7 @@ cpu@3 { compatible = "arm,cortex-a15"; + device_type = "cpu"; reg = <3>; clocks = <&a9pll>; clock-names = "cpu"; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 9b23a8255e39..f63490707f3a 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -26,7 +26,7 @@ }; chosen { - bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc"; + bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc"; }; sdhci@12530000 { diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 2e3b6efaf1a2..3acf594ea60b 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -574,7 +574,7 @@ hdmi { compatible = "samsung,exynos5-hdmi"; - reg = <0x14530000 0x100000>; + reg = <0x14530000 0x70000>; interrupts = <0 95 0>; }; diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts index 921c83cf694f..81e2c964a900 100644 --- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts +++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts @@ -21,7 +21,7 @@ }; chosen { - bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x81000000,8M console=ttySAC2,115200 init=/linuxrc"; + bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x81000000,8M console=ttySAC0,115200 init=/linuxrc"; }; spi { diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index a9ae5d32e80d..5927a8df5625 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -30,33 +30,37 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu@900 { compatible = "arm,cortex-a9"; - reg = <0>; + device_type = "cpu"; + reg = <0x900>; next-level-cache = <&L2>; clocks = <&a9pll>; clock-names = "cpu"; }; - cpu@1 { + cpu@901 { compatible = "arm,cortex-a9"; - reg = <1>; + device_type = "cpu"; + reg = <0x901>; next-level-cache = <&L2>; clocks = <&a9pll>; clock-names = "cpu"; }; - cpu@2 { + cpu@902 { compatible = "arm,cortex-a9"; - reg = <2>; + device_type = "cpu"; + reg = <0x902>; next-level-cache = <&L2>; clocks = <&a9pll>; clock-names = "cpu"; }; - cpu@3 { + cpu@903 { compatible = "arm,cortex-a9"; - reg = <3>; + device_type = "cpu"; + reg = <0x903>; next-level-cache = <&L2>; clocks = <&a9pll>; clock-names = "cpu"; diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index 7c43b8e70b9f..e7484e4ea659 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -39,17 +39,17 @@ hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < - 0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */ + 0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; }; - led_pin_gpio0_17: led_gpio0_17@0 { + led_pin_gpio2_1: led_gpio2_1@0 { reg = <0>; fsl,pinmux-ids = < - 0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */ + 0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; @@ -110,7 +110,7 @@ leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&led_pin_gpio0_17>; + pinctrl-0 = <&led_pin_gpio2_1>; user { label = "green"; diff --git a/arch/arm/boot/dts/imx31-bug.dts b/arch/arm/boot/dts/imx31-bug.dts index 24731cb78e8e..7f67402328d3 100644 --- a/arch/arm/boot/dts/imx31-bug.dts +++ b/arch/arm/boot/dts/imx31-bug.dts @@ -14,7 +14,7 @@ / { model = "Buglabs i.MX31 Bug 1.x"; - compatible = "fsl,imx31-bug", "fsl,imx31"; + compatible = "buglabs,imx31-bug", "fsl,imx31"; memory { reg = <0x80000000 0x8000000>; /* 128M */ diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 552aed4ff982..edc3f1eb6699 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -492,7 +492,7 @@ compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; reg = <0x53fcc000 0x4000>; interrupts = <83>; - clocks = <&clks 158>, <&clks 157>; + clocks = <&clks 87>, <&clks 86>; clock-names = "ipg", "per"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi index 9ae2004d5675..4ccea2130a6c 100644 --- a/arch/arm/boot/dts/kirkwood-6282.dtsi +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi @@ -39,6 +39,7 @@ #size-cells = <0>; interrupts = <32>; clock-frequency = <100000>; + clocks = <&gate_clk 7>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts index c0de5a7f660d..cd15452a52a6 100644 --- a/arch/arm/boot/dts/kirkwood-topkick.dts +++ b/arch/arm/boot/dts/kirkwood-topkick.dts @@ -82,4 +82,21 @@ gpios = <&gpio1 16 1>; }; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + sata0_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "SATA0 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 4 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 7735cee4a9c6..110d6cbb795b 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -144,6 +144,7 @@ compatible = "marvell,orion-ehci"; reg = <0x50000 0x1000>; interrupts = <19>; + clocks = <&gate_clk 3>; status = "okay"; }; diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig index a702fb345c01..b5bc96cb65a7 100644 --- a/arch/arm/configs/mvebu_defconfig +++ b/arch/arm/configs/mvebu_defconfig @@ -33,9 +33,7 @@ CONFIG_MVNETA=y CONFIG_MARVELL_PHY=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_I2C=y -CONFIG_I2C_MV64XXX=y +CONFIG_SERIAL_8250_DW=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y # CONFIG_USB_SUPPORT is not set diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 91d5b6f1d5af..e103c290bc9e 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -74,6 +74,8 @@ config SOC_EXYNOS5440 depends on ARCH_EXYNOS5 select ARM_ARCH_TIMER select AUTO_ZRELADDR + select PINCTRL + select PINCTRL_EXYNOS5440 help Enable EXYNOS5440 SoC support diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index d6d0dc651089..1a89824a5f78 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -424,11 +424,18 @@ static void __init exynos5_init_clocks(int xtal) { printk(KERN_DEBUG "%s: initializing clocks\n", __func__); + /* EXYNOS5440 can support only common clock framework */ + + if (soc_is_exynos5440()) + return; + +#ifdef CONFIG_SOC_EXYNOS5250 s3c24xx_register_baseclocks(xtal); s5p_register_clocks(xtal); exynos5_register_clocks(); exynos5_setup_clocks(); +#endif } #define COMBINER_ENABLE_SET 0x0 diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index dc248167d206..981dc1e1da51 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -135,7 +135,7 @@ static struct sys_timer highbank_timer = { static void highbank_power_off(void) { - hignbank_set_pwr_shutdown(); + highbank_set_pwr_shutdown(); while (1) cpu_do_idle(); diff --git a/arch/arm/mach-highbank/hotplug.c b/arch/arm/mach-highbank/hotplug.c index 7b60faccd551..f30c52843396 100644 --- a/arch/arm/mach-highbank/hotplug.c +++ b/arch/arm/mach-highbank/hotplug.c @@ -30,7 +30,7 @@ void __ref highbank_cpu_die(unsigned int cpu) { flush_cache_all(); - highbank_set_cpu_jump(cpu, secondary_startup); + highbank_set_cpu_jump(cpu, phys_to_virt(0)); highbank_set_core_pwr(); cpu_do_idle(); diff --git a/arch/arm/mach-highbank/platsmp.c b/arch/arm/mach-highbank/platsmp.c index 1129957f6c1d..4ecc864ac8b9 100644 --- a/arch/arm/mach-highbank/platsmp.c +++ b/arch/arm/mach-highbank/platsmp.c @@ -32,6 +32,7 @@ static void __cpuinit highbank_secondary_init(unsigned int cpu) static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struct *idle) { + highbank_set_cpu_jump(cpu, secondary_startup); gic_raise_softirq(cpumask_of(cpu), 0); return 0; } @@ -61,19 +62,8 @@ static void __init highbank_smp_init_cpus(void) static void __init highbank_smp_prepare_cpus(unsigned int max_cpus) { - int i; - if (scu_base_addr) scu_enable(scu_base_addr); - - /* - * Write the address of secondary startup into the jump table - * The cores are in wfi and wait until they receive a soft interrupt - * and a non-zero value to jump to. Then the secondary CPU branches - * to this address. - */ - for (i = 1; i < max_cpus; i++) - highbank_set_cpu_jump(i, secondary_startup); } struct smp_operations highbank_smp_ops __initdata = { diff --git a/arch/arm/mach-highbank/pm.c b/arch/arm/mach-highbank/pm.c index 74aa135966f0..04eddb4f4380 100644 --- a/arch/arm/mach-highbank/pm.c +++ b/arch/arm/mach-highbank/pm.c @@ -14,10 +14,12 @@ * this program. If not, see <http://www.gnu.org/licenses/>. */ +#include <linux/cpu_pm.h> #include <linux/init.h> #include <linux/io.h> #include <linux/suspend.h> +#include <asm/cacheflush.h> #include <asm/proc-fns.h> #include <asm/suspend.h> @@ -26,16 +28,31 @@ static int highbank_suspend_finish(unsigned long val) { + outer_flush_all(); + outer_disable(); + + highbank_set_pwr_suspend(); + cpu_do_idle(); + + highbank_clear_pwr_request(); return 0; } static int highbank_pm_enter(suspend_state_t state) { - hignbank_set_pwr_suspend(); + cpu_pm_enter(); + cpu_cluster_pm_enter(); + highbank_set_cpu_jump(0, cpu_resume); cpu_suspend(0, highbank_suspend_finish); + cpu_cluster_pm_exit(); + cpu_pm_exit(); + + highbank_smc1(0x102, 0x1); + if (scu_base_addr) + scu_enable(scu_base_addr); return 0; } diff --git a/arch/arm/mach-highbank/sysregs.h b/arch/arm/mach-highbank/sysregs.h index e13e8ea7c6cb..70af9d13fcef 100644 --- a/arch/arm/mach-highbank/sysregs.h +++ b/arch/arm/mach-highbank/sysregs.h @@ -44,28 +44,43 @@ static inline void highbank_set_core_pwr(void) writel_relaxed(1, sregs_base + SREG_CPU_PWR_CTRL(cpu)); } -static inline void hignbank_set_pwr_suspend(void) +static inline void highbank_clear_core_pwr(void) +{ + int cpu = cpu_logical_map(smp_processor_id()); + if (scu_base_addr) + scu_power_mode(scu_base_addr, SCU_PM_NORMAL); + else + writel_relaxed(0, sregs_base + SREG_CPU_PWR_CTRL(cpu)); +} + +static inline void highbank_set_pwr_suspend(void) { writel(HB_PWR_SUSPEND, sregs_base + HB_SREG_A9_PWR_REQ); highbank_set_core_pwr(); } -static inline void hignbank_set_pwr_shutdown(void) +static inline void highbank_set_pwr_shutdown(void) { writel(HB_PWR_SHUTDOWN, sregs_base + HB_SREG_A9_PWR_REQ); highbank_set_core_pwr(); } -static inline void hignbank_set_pwr_soft_reset(void) +static inline void highbank_set_pwr_soft_reset(void) { writel(HB_PWR_SOFT_RESET, sregs_base + HB_SREG_A9_PWR_REQ); highbank_set_core_pwr(); } -static inline void hignbank_set_pwr_hard_reset(void) +static inline void highbank_set_pwr_hard_reset(void) { writel(HB_PWR_HARD_RESET, sregs_base + HB_SREG_A9_PWR_REQ); highbank_set_core_pwr(); } +static inline void highbank_clear_pwr_request(void) +{ + writel(~0UL, sregs_base + HB_SREG_A9_PWR_REQ); + highbank_clear_core_pwr(); +} + #endif diff --git a/arch/arm/mach-highbank/system.c b/arch/arm/mach-highbank/system.c index aed96ad9bd4a..37d8384dcf19 100644 --- a/arch/arm/mach-highbank/system.c +++ b/arch/arm/mach-highbank/system.c @@ -22,9 +22,9 @@ void highbank_restart(char mode, const char *cmd) { if (mode == 'h') - hignbank_set_pwr_hard_reset(); + highbank_set_pwr_hard_reset(); else - hignbank_set_pwr_soft_reset(); + highbank_set_pwr_soft_reset(); while (1) cpu_do_idle(); diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index ff4150a2ad05..de4fd2bb1e27 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -67,6 +67,10 @@ static void __init kirkwood_legacy_clk_init(void) orion_clkdev_add(NULL, "mv643xx_eth_port.1", of_clk_get_from_provider(&clkspec)); + clkspec.args[0] = CGC_BIT_SDIO; + orion_clkdev_add(NULL, "mvsdio", + of_clk_get_from_provider(&clkspec)); + } static void __init kirkwood_of_clk_init(void) diff --git a/arch/arm/mach-kirkwood/board-usi_topkick.c b/arch/arm/mach-kirkwood/board-usi_topkick.c index 15e69fcde9f4..23d2dd1b1b1e 100644 --- a/arch/arm/mach-kirkwood/board-usi_topkick.c +++ b/arch/arm/mach-kirkwood/board-usi_topkick.c @@ -64,8 +64,6 @@ static unsigned int topkick_mpp_config[] __initdata = { 0 }; -#define TOPKICK_SATA0_PWR_ENABLE 36 - void __init usi_topkick_init(void) { /* @@ -73,8 +71,6 @@ void __init usi_topkick_init(void) */ kirkwood_mpp_conf(topkick_mpp_config); - /* SATA0 power enable */ - gpio_set_value(TOPKICK_SATA0_PWR_ENABLE, 1); kirkwood_ge00_init(&topkick_ge00_data); kirkwood_sdio_init(&topkick_mvsdio_data); diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c index 98167a4319f7..9f19069248da 100644 --- a/arch/arm/mach-nomadik/board-nhk8815.c +++ b/arch/arm/mach-nomadik/board-nhk8815.c @@ -27,7 +27,6 @@ #include <linux/pinctrl/machine.h> #include <linux/platform_data/pinctrl-nomadik.h> #include <linux/platform_data/clocksource-nomadik-mtu.h> -#include <linux/platform_data/mtd-nomadik-nand.h> #include <asm/hardware/vic.h> #include <asm/sizes.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-nomadik/include/mach/irqs.h b/arch/arm/mach-nomadik/include/mach/irqs.h index b549d0571548..215f8cdb4004 100644 --- a/arch/arm/mach-nomadik/include/mach/irqs.h +++ b/arch/arm/mach-nomadik/include/mach/irqs.h @@ -22,49 +22,49 @@ #include <mach/hardware.h> -#define IRQ_VIC_START 1 /* first VIC interrupt is 1 */ +#define IRQ_VIC_START 32 /* first VIC interrupt is 1 */ /* * Interrupt numbers generic for all Nomadik Chip cuts */ -#define IRQ_WATCHDOG 1 -#define IRQ_SOFTINT 2 -#define IRQ_CRYPTO 3 -#define IRQ_OWM 4 -#define IRQ_MTU0 5 -#define IRQ_MTU1 6 -#define IRQ_GPIO0 7 -#define IRQ_GPIO1 8 -#define IRQ_GPIO2 9 -#define IRQ_GPIO3 10 -#define IRQ_RTC_RTT 11 -#define IRQ_SSP 12 -#define IRQ_UART0 13 -#define IRQ_DMA1 14 -#define IRQ_CLCD_MDIF 15 -#define IRQ_DMA0 16 -#define IRQ_PWRFAIL 17 -#define IRQ_UART1 18 -#define IRQ_FIRDA 19 -#define IRQ_MSP0 20 -#define IRQ_I2C0 21 -#define IRQ_I2C1 22 -#define IRQ_SDMMC 23 -#define IRQ_USBOTG 24 -#define IRQ_SVA_IT0 25 -#define IRQ_SVA_IT1 26 -#define IRQ_SAA_IT0 27 -#define IRQ_SAA_IT1 28 -#define IRQ_UART2 29 -#define IRQ_MSP2 30 -#define IRQ_L2CC 49 -#define IRQ_HPI 50 -#define IRQ_SKE 51 -#define IRQ_KP 52 -#define IRQ_MEMST 55 -#define IRQ_SGA_IT 59 -#define IRQ_USBM 61 -#define IRQ_MSP1 63 +#define IRQ_WATCHDOG (IRQ_VIC_START+0) +#define IRQ_SOFTINT (IRQ_VIC_START+1) +#define IRQ_CRYPTO (IRQ_VIC_START+2) +#define IRQ_OWM (IRQ_VIC_START+3) +#define IRQ_MTU0 (IRQ_VIC_START+4) +#define IRQ_MTU1 (IRQ_VIC_START+5) +#define IRQ_GPIO0 (IRQ_VIC_START+6) +#define IRQ_GPIO1 (IRQ_VIC_START+7) +#define IRQ_GPIO2 (IRQ_VIC_START+8) +#define IRQ_GPIO3 (IRQ_VIC_START+9) +#define IRQ_RTC_RTT (IRQ_VIC_START+10) +#define IRQ_SSP (IRQ_VIC_START+11) +#define IRQ_UART0 (IRQ_VIC_START+12) +#define IRQ_DMA1 (IRQ_VIC_START+13) +#define IRQ_CLCD_MDIF (IRQ_VIC_START+14) +#define IRQ_DMA0 (IRQ_VIC_START+15) +#define IRQ_PWRFAIL (IRQ_VIC_START+16) +#define IRQ_UART1 (IRQ_VIC_START+17) +#define IRQ_FIRDA (IRQ_VIC_START+18) +#define IRQ_MSP0 (IRQ_VIC_START+19) +#define IRQ_I2C0 (IRQ_VIC_START+20) +#define IRQ_I2C1 (IRQ_VIC_START+21) +#define IRQ_SDMMC (IRQ_VIC_START+22) +#define IRQ_USBOTG (IRQ_VIC_START+23) +#define IRQ_SVA_IT0 (IRQ_VIC_START+24) +#define IRQ_SVA_IT1 (IRQ_VIC_START+25) +#define IRQ_SAA_IT0 (IRQ_VIC_START+26) +#define IRQ_SAA_IT1 (IRQ_VIC_START+27) +#define IRQ_UART2 (IRQ_VIC_START+28) +#define IRQ_MSP2 (IRQ_VIC_START+29) +#define IRQ_L2CC (IRQ_VIC_START+30) +#define IRQ_HPI (IRQ_VIC_START+31) +#define IRQ_SKE (IRQ_VIC_START+32) +#define IRQ_KP (IRQ_VIC_START+33) +#define IRQ_MEMST (IRQ_VIC_START+34) +#define IRQ_SGA_IT (IRQ_VIC_START+35) +#define IRQ_USBM (IRQ_VIC_START+36) +#define IRQ_MSP1 (IRQ_VIC_START+37) #define NOMADIK_GPIO_OFFSET (IRQ_VIC_START+64) diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index a8fce3ccc707..2e98a3ac7c5e 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -160,7 +160,7 @@ static struct omap_lcd_config ams_delta_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_usb_config ams_delta_usb_config = { +static struct omap_usb_config ams_delta_usb_config __initdata = { .register_host = 1, .hmc_mode = 16, .pins[0] = 2, diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c index 104fed366b8f..1a1db5971cd9 100644 --- a/arch/arm/mach-omap1/usb.c +++ b/arch/arm/mach-omap1/usb.c @@ -629,8 +629,14 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config) static inline void omap_1510_usb_init(struct omap_usb_config *config) {} #endif -void __init omap1_usb_init(struct omap_usb_config *pdata) +void __init omap1_usb_init(struct omap_usb_config *_pdata) { + struct omap_usb_config *pdata; + + pdata = kmemdup(_pdata, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return; + pdata->usb0_init = omap1_usb0_init; pdata->usb1_init = omap1_usb1_init; pdata->usb2_init = omap1_usb2_init; diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c index bdf39481fbd6..6ef87580c33f 100644 --- a/arch/arm/mach-omap2/cclock3xxx_data.c +++ b/arch/arm/mach-omap2/cclock3xxx_data.c @@ -1167,6 +1167,8 @@ static const struct clk_ops emu_src_ck_ops = { .recalc_rate = &omap2_clksel_recalc, .get_parent = &omap2_clksel_find_parent_index, .set_parent = &omap2_clksel_set_parent, + .enable = &omap2_clkops_enable_clkdm, + .disable = &omap2_clkops_disable_clkdm, }; static struct clk emu_src_ck; diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 081c71edddf4..646c14d9fdb9 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -2070,7 +2070,7 @@ static struct omap_hwmod_irq_info am33xx_usbss_mpu_irqs[] = { { .name = "usbss-irq", .irq = 17 + OMAP_INTC_START, }, { .name = "musb0-irq", .irq = 18 + OMAP_INTC_START, }, { .name = "musb1-irq", .irq = 19 + OMAP_INTC_START, }, - { .irq = -1 + OMAP_INTC_START, }, + { .irq = -1, }, }; static struct omap_hwmod am33xx_usbss_hwmod = { @@ -2515,7 +2515,7 @@ static struct omap_hwmod_ocp_if am33xx_l4_hs__cpgmac0 = { .user = OCP_USER_MPU, }; -struct omap_hwmod_addr_space am33xx_mdio_addr_space[] = { +static struct omap_hwmod_addr_space am33xx_mdio_addr_space[] = { { .pa_start = 0x4A101000, .pa_end = 0x4A101000 + SZ_256 - 1, @@ -2523,7 +2523,7 @@ struct omap_hwmod_addr_space am33xx_mdio_addr_space[] = { { } }; -struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = { +static struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = { .master = &am33xx_cpgmac0_hwmod, .slave = &am33xx_mdio_hwmod, .addr = am33xx_mdio_addr_space, diff --git a/arch/arm/mach-omap2/prm2xxx.c b/arch/arm/mach-omap2/prm2xxx.c index cc0e71430af1..418de9c3b319 100644 --- a/arch/arm/mach-omap2/prm2xxx.c +++ b/arch/arm/mach-omap2/prm2xxx.c @@ -28,6 +28,14 @@ #include "prm-regbits-24xx.h" /* + * OMAP24xx PM_PWSTCTRL_*.POWERSTATE and PM_PWSTST_*.LASTSTATEENTERED bits - + * these are reversed from the bits used on OMAP3+ + */ +#define OMAP24XX_PWRDM_POWER_ON 0x0 +#define OMAP24XX_PWRDM_POWER_RET 0x1 +#define OMAP24XX_PWRDM_POWER_OFF 0x3 + +/* * omap2xxx_prm_reset_src_map - map from bits in the PRM_RSTST_WKUP * hardware register (which are specific to the OMAP2xxx SoCs) to * reset source ID bit shifts (which is an OMAP SoC-independent @@ -68,6 +76,34 @@ static u32 omap2xxx_prm_read_reset_sources(void) } /** + * omap2xxx_pwrst_to_common_pwrst - convert OMAP2xxx pwrst to common pwrst + * @omap2xxx_pwrst: OMAP2xxx hardware power state to convert + * + * Return the common power state bits corresponding to the OMAP2xxx + * hardware power state bits @omap2xxx_pwrst, or -EINVAL upon error. + */ +static int omap2xxx_pwrst_to_common_pwrst(u8 omap2xxx_pwrst) +{ + u8 pwrst; + + switch (omap2xxx_pwrst) { + case OMAP24XX_PWRDM_POWER_OFF: + pwrst = PWRDM_POWER_OFF; + break; + case OMAP24XX_PWRDM_POWER_RET: + pwrst = PWRDM_POWER_RET; + break; + case OMAP24XX_PWRDM_POWER_ON: + pwrst = PWRDM_POWER_ON; + break; + default: + return -EINVAL; + } + + return pwrst; +} + +/** * omap2xxx_prm_dpll_reset - use DPLL reset to reboot the OMAP SoC * * Set the DPLL reset bit, which should reboot the SoC. This is the @@ -97,10 +133,56 @@ int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm) return 0; } +static int omap2xxx_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) +{ + u8 omap24xx_pwrst; + + switch (pwrst) { + case PWRDM_POWER_OFF: + omap24xx_pwrst = OMAP24XX_PWRDM_POWER_OFF; + break; + case PWRDM_POWER_RET: + omap24xx_pwrst = OMAP24XX_PWRDM_POWER_RET; + break; + case PWRDM_POWER_ON: + omap24xx_pwrst = OMAP24XX_PWRDM_POWER_ON; + break; + default: + return -EINVAL; + } + + omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK, + (omap24xx_pwrst << OMAP_POWERSTATE_SHIFT), + pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL); + return 0; +} + +static int omap2xxx_pwrdm_read_next_pwrst(struct powerdomain *pwrdm) +{ + u8 omap2xxx_pwrst; + + omap2xxx_pwrst = omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, + OMAP2_PM_PWSTCTRL, + OMAP_POWERSTATE_MASK); + + return omap2xxx_pwrst_to_common_pwrst(omap2xxx_pwrst); +} + +static int omap2xxx_pwrdm_read_pwrst(struct powerdomain *pwrdm) +{ + u8 omap2xxx_pwrst; + + omap2xxx_pwrst = omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, + OMAP2_PM_PWSTST, + OMAP_POWERSTATEST_MASK); + + return omap2xxx_pwrst_to_common_pwrst(omap2xxx_pwrst); +} + struct pwrdm_ops omap2_pwrdm_operations = { - .pwrdm_set_next_pwrst = omap2_pwrdm_set_next_pwrst, - .pwrdm_read_next_pwrst = omap2_pwrdm_read_next_pwrst, - .pwrdm_read_pwrst = omap2_pwrdm_read_pwrst, + .pwrdm_set_next_pwrst = omap2xxx_pwrdm_set_next_pwrst, + .pwrdm_read_next_pwrst = omap2xxx_pwrdm_read_next_pwrst, + .pwrdm_read_pwrst = omap2xxx_pwrdm_read_pwrst, .pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst, .pwrdm_set_mem_onst = omap2_pwrdm_set_mem_onst, .pwrdm_set_mem_retst = omap2_pwrdm_set_mem_retst, diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index 30517f5af707..a3e121f94a86 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -103,28 +103,6 @@ int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift) /* Powerdomain low-level functions */ /* Common functions across OMAP2 and OMAP3 */ -int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) -{ - omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK, - (pwrst << OMAP_POWERSTATE_SHIFT), - pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL); - return 0; -} - -int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm) -{ - return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, - OMAP2_PM_PWSTCTRL, - OMAP_POWERSTATE_MASK); -} - -int omap2_pwrdm_read_pwrst(struct powerdomain *pwrdm) -{ - return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, - OMAP2_PM_PWSTST, - OMAP_POWERSTATEST_MASK); -} - int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst) { diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c index 39822aabcff3..e648bd55b072 100644 --- a/arch/arm/mach-omap2/prm3xxx.c +++ b/arch/arm/mach-omap2/prm3xxx.c @@ -277,6 +277,28 @@ static u32 omap3xxx_prm_read_reset_sources(void) /* Powerdomain low-level functions */ +static int omap3_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) +{ + omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK, + (pwrst << OMAP_POWERSTATE_SHIFT), + pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL); + return 0; +} + +static int omap3_pwrdm_read_next_pwrst(struct powerdomain *pwrdm) +{ + return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, + OMAP2_PM_PWSTCTRL, + OMAP_POWERSTATE_MASK); +} + +static int omap3_pwrdm_read_pwrst(struct powerdomain *pwrdm) +{ + return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, + OMAP2_PM_PWSTST, + OMAP_POWERSTATEST_MASK); +} + /* Applicable only for OMAP3. Not supported on OMAP2 */ static int omap3_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm) { @@ -355,9 +377,9 @@ static int omap3_pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm) } struct pwrdm_ops omap3_pwrdm_operations = { - .pwrdm_set_next_pwrst = omap2_pwrdm_set_next_pwrst, - .pwrdm_read_next_pwrst = omap2_pwrdm_read_next_pwrst, - .pwrdm_read_pwrst = omap2_pwrdm_read_pwrst, + .pwrdm_set_next_pwrst = omap3_pwrdm_set_next_pwrst, + .pwrdm_read_next_pwrst = omap3_pwrdm_read_next_pwrst, + .pwrdm_read_pwrst = omap3_pwrdm_read_pwrst, .pwrdm_read_prev_pwrst = omap3_pwrdm_read_prev_pwrst, .pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst, .pwrdm_read_logic_pwrst = omap3_pwrdm_read_logic_pwrst, diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index 7498bc77fe8b..c05a343d465d 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -56,9 +56,9 @@ static struct omap_prcm_irq_setup omap4_prcm_irq_setup = { * enumeration) */ static struct prm_reset_src_map omap44xx_prm_reset_src_map[] = { - { OMAP4430_RST_GLOBAL_WARM_SW_SHIFT, + { OMAP4430_GLOBAL_WARM_SW_RST_SHIFT, OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT }, - { OMAP4430_RST_GLOBAL_COLD_SW_SHIFT, + { OMAP4430_GLOBAL_COLD_RST_SHIFT, OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT }, { OMAP4430_MPU_SECURITY_VIOL_RST_SHIFT, OMAP_SECU_VIOL_RST_SRC_ID_SHIFT }, @@ -333,7 +333,7 @@ static u32 omap44xx_prm_read_reset_sources(void) u32 r = 0; u32 v; - v = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, + v = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, OMAP4_RM_RSTST); p = omap44xx_prm_reset_src_map; diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h index 22b0979206ca..8ee1fbdec561 100644 --- a/arch/arm/mach-omap2/prm44xx.h +++ b/arch/arm/mach-omap2/prm44xx.h @@ -62,8 +62,8 @@ /* OMAP4 specific register offsets */ #define OMAP4_RM_RSTCTRL 0x0000 -#define OMAP4_RM_RSTTIME 0x0004 -#define OMAP4_RM_RSTST 0x0008 +#define OMAP4_RM_RSTST 0x0004 +#define OMAP4_RM_RSTTIME 0x0008 #define OMAP4_PM_PWSTCTRL 0x0000 #define OMAP4_PM_PWSTST 0x0004 diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index f3771cdb9838..5b0b86bb34bb 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -22,6 +22,8 @@ #include <asm/mach/time.h> #include <asm/sched_clock.h> +#include <plat/counter-32k.h> + /* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */ #define OMAP2_32KSYNCNT_REV_OFF 0x0 #define OMAP2_32KSYNCNT_REV_SCHEME (0x3 << 30) diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 743fc2836f7a..a5bc92d7e476 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -26,6 +26,8 @@ #include <asm/mach/map.h> +#include <plat/sram.h> + #define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1))) static void __iomem *omap_sram_base; diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index e0072ce8d6e9..b69e11dc679d 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -43,7 +43,7 @@ extern unsigned long samsung_cpu_id; #define EXYNOS4_CPU_MASK 0xFFFE0000 #define EXYNOS5250_SOC_ID 0x43520000 -#define EXYNOS5440_SOC_ID 0x54400000 +#define EXYNOS5440_SOC_ID 0xE5440000 #define EXYNOS5_SOC_MASK 0xFFFFF000 #define IS_SAMSUNG_CPU(name, id, mask) \ diff --git a/drivers/clk/mvebu/clk-gating-ctrl.c b/drivers/clk/mvebu/clk-gating-ctrl.c index c6d3c263b070..8fa5408b6c7d 100644 --- a/drivers/clk/mvebu/clk-gating-ctrl.c +++ b/drivers/clk/mvebu/clk-gating-ctrl.c @@ -32,7 +32,7 @@ struct mvebu_soc_descr { #define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw) -static struct clk __init *mvebu_clk_gating_get_src( +static struct clk *mvebu_clk_gating_get_src( struct of_phandle_args *clkspec, void *data) { struct mvebu_gating_ctrl *ctrl = (struct mvebu_gating_ctrl *)data; diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c index ac71f555dd72..e17fad03cb80 100644 --- a/drivers/dma/mv_xor.c +++ b/drivers/dma/mv_xor.c @@ -1361,13 +1361,16 @@ static int mv_xor_probe(struct platform_device *pdev) err_channel_add: for (i = 0; i < MV_XOR_MAX_CHANNELS; i++) if (xordev->channels[i]) { + mv_xor_channel_remove(xordev->channels[i]); if (pdev->dev.of_node) irq_dispose_mapping(xordev->channels[i]->irq); - mv_xor_channel_remove(xordev->channels[i]); } - clk_disable_unprepare(xordev->clk); - clk_put(xordev->clk); + if (!IS_ERR(xordev->clk)) { + clk_disable_unprepare(xordev->clk); + clk_put(xordev->clk); + } + return ret; } diff --git a/drivers/pinctrl/mvebu/pinctrl-dove.c b/drivers/pinctrl/mvebu/pinctrl-dove.c index 750dea78f53a..69aba3697287 100644 --- a/drivers/pinctrl/mvebu/pinctrl-dove.c +++ b/drivers/pinctrl/mvebu/pinctrl-dove.c @@ -595,8 +595,11 @@ static int dove_pinctrl_probe(struct platform_device *pdev) * grab clk to make sure it is ticking. */ clk = devm_clk_get(&pdev->dev, NULL); - if (!IS_ERR(clk)) - clk_prepare_enable(clk); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "Unable to get pdma clock"); + return PTR_RET(clk); + } + clk_prepare_enable(clk); return mvebu_pinctrl_probe(pdev); } diff --git a/drivers/power/reset/gpio-poweroff.c b/drivers/power/reset/gpio-poweroff.c index 06074248ba7a..e290d48ddd99 100644 --- a/drivers/power/reset/gpio-poweroff.c +++ b/drivers/power/reset/gpio-poweroff.c @@ -29,15 +29,16 @@ static int gpio_active_low; static void gpio_poweroff_do_poweroff(void) { - BUG_ON(gpio_num == -1); + BUG_ON(!gpio_is_valid(gpio_num)); - /* drive it active */ + /* drive it active, also inactive->active edge */ gpio_direction_output(gpio_num, !gpio_active_low); mdelay(100); - /* rising edge or drive inactive */ + /* drive inactive, also active->inactive edge */ gpio_set_value(gpio_num, gpio_active_low); mdelay(100); - /* falling edge */ + + /* drive it active, also inactive->active edge */ gpio_set_value(gpio_num, !gpio_active_low); /* give it some time */ @@ -60,15 +61,12 @@ static int gpio_poweroff_probe(struct platform_device *pdev) } gpio_num = of_get_gpio_flags(pdev->dev.of_node, 0, &flags); - if (gpio_num < 0) { - pr_err("%s: Could not get GPIO configuration: %d", - __func__, gpio_num); - return -ENODEV; - } + if (!gpio_is_valid(gpio_num)) + return gpio_num; + gpio_active_low = flags & OF_GPIO_ACTIVE_LOW; - if (of_get_property(pdev->dev.of_node, "input", NULL)) - input = true; + input = of_property_read_bool(pdev->dev.of_node, "input"); ret = gpio_request(gpio_num, "poweroff-gpio"); if (ret) { @@ -98,8 +96,7 @@ err: static int gpio_poweroff_remove(struct platform_device *pdev) { - if (gpio_num != -1) - gpio_free(gpio_num); + gpio_free(gpio_num); if (pm_power_off == &gpio_poweroff_do_poweroff) pm_power_off = NULL; @@ -115,15 +112,15 @@ static struct platform_driver gpio_poweroff_driver = { .probe = gpio_poweroff_probe, .remove = gpio_poweroff_remove, .driver = { - .name = "poweroff-gpio", - .owner = THIS_MODULE, - .of_match_table = of_gpio_poweroff_match, - }, + .name = "poweroff-gpio", + .owner = THIS_MODULE, + .of_match_table = of_gpio_poweroff_match, + }, }; module_platform_driver(gpio_poweroff_driver); MODULE_AUTHOR("Jamie Lentin <jm@lentin.co.uk>"); MODULE_DESCRIPTION("GPIO poweroff driver"); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:poweroff-gpio"); diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c index a45b37c2e88e..755556ca5b2d 100644 --- a/drivers/video/mxsfb.c +++ b/drivers/video/mxsfb.c @@ -369,7 +369,8 @@ static void mxsfb_disable_controller(struct fb_info *fb_info) loop--; } - writel(VDCTRL4_SYNC_SIGNALS_ON, host->base + LCDC_VDCTRL4 + REG_CLR); + reg = readl(host->base + LCDC_VDCTRL4); + writel(reg & ~VDCTRL4_SYNC_SIGNALS_ON, host->base + LCDC_VDCTRL4); clk_disable_unprepare(host->clk); |