diff options
| -rw-r--r-- | Documentation/hwmon/jc42 | 12 | ||||
| -rw-r--r-- | drivers/hwmon/jc42.c | 33 |
2 files changed, 37 insertions, 8 deletions
diff --git a/Documentation/hwmon/jc42 b/Documentation/hwmon/jc42 index 2a0924003f92..a22ecf48f255 100644 --- a/Documentation/hwmon/jc42 +++ b/Documentation/hwmon/jc42 @@ -86,15 +86,19 @@ limits. The chip supports only a single register to configure the hysteresis, which applies to all limits. This register can be written by writing into temp1_crit_hyst. Other hysteresis attributes are read-only. +If the BIOS has configured the sensor for automatic temperature management, it +is likely that it has locked the registers, i.e., that the temperature limits +cannot be changed. + Sysfs entries ------------- temp1_input Temperature (RO) -temp1_min Minimum temperature (RW) -temp1_max Maximum temperature (RW) -temp1_crit Critical high temperature (RW) +temp1_min Minimum temperature (RO or RW) +temp1_max Maximum temperature (RO or RW) +temp1_crit Critical high temperature (RO or RW) -temp1_crit_hyst Critical hysteresis temperature (RW) +temp1_crit_hyst Critical hysteresis temperature (RO or RW) temp1_max_hyst Maximum hysteresis temperature (RO) temp1_min_alarm Temperature low alarm diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c index 5efe2399e8f8..934991237061 100644 --- a/drivers/hwmon/jc42.c +++ b/drivers/hwmon/jc42.c @@ -53,6 +53,8 @@ static const unsigned short normal_i2c[] = { /* Configuration register defines */ #define JC42_CFG_CRIT_ONLY (1 << 2) +#define JC42_CFG_TCRIT_LOCK (1 << 6) +#define JC42_CFG_EVENT_LOCK (1 << 7) #define JC42_CFG_SHUTDOWN (1 << 8) #define JC42_CFG_HYST_SHIFT 9 #define JC42_CFG_HYST_MASK 0x03 @@ -380,14 +382,14 @@ static ssize_t show_alarm(struct device *dev, static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL); -static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, +static DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp_crit, set_temp_crit); -static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, +static DEVICE_ATTR(temp1_min, S_IRUGO, show_temp_min, set_temp_min); -static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, +static DEVICE_ATTR(temp1_max, S_IRUGO, show_temp_max, set_temp_max); -static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, +static DEVICE_ATTR(temp1_crit_hyst, S_IRUGO, show_temp_crit_hyst, set_temp_crit_hyst); static DEVICE_ATTR(temp1_max_hyst, S_IRUGO, show_temp_max_hyst, NULL); @@ -412,8 +414,31 @@ static struct attribute *jc42_attributes[] = { NULL }; +static mode_t jc42_attribute_mode(struct kobject *kobj, + struct attribute *attr, int index) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct i2c_client *client = to_i2c_client(dev); + struct jc42_data *data = i2c_get_clientdata(client); + unsigned int config = data->config; + bool readonly; + + if (attr == &dev_attr_temp1_crit.attr) + readonly = config & JC42_CFG_TCRIT_LOCK; + else if (attr == &dev_attr_temp1_min.attr || + attr == &dev_attr_temp1_max.attr) + readonly = config & JC42_CFG_EVENT_LOCK; + else if (attr == &dev_attr_temp1_crit_hyst.attr) + readonly = config & (JC42_CFG_EVENT_LOCK | JC42_CFG_TCRIT_LOCK); + else + readonly = true; + + return S_IRUGO | (readonly ? 0 : S_IWUSR); +} + static const struct attribute_group jc42_group = { .attrs = jc42_attributes, + .is_visible = jc42_attribute_mode, }; /* Return 0 if detection is successful, -ENODEV otherwise */ |