diff options
| -rw-r--r-- | drivers/regulator/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/regulator/Makefile | 1 | ||||
| -rw-r--r-- | drivers/regulator/wm8994-regulator.c | 304 |
3 files changed, 312 insertions, 0 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 2bc01ee9d9f2..3c07169498cf 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -111,6 +111,13 @@ config REGULATOR_WM8400 This driver provides support for the voltage regulators of the WM8400 AudioPlus PMIC. +config REGULATOR_WM8994 + tristate "Wolfson Microelectronics WM8994 CODEC" + depends on MFD_WM8994 + help + This driver provides support for the voltage regulators on the + WM8994 CODEC. + config REGULATOR_DA903X tristate "Support regulators on Dialog Semiconductor DA9030/DA9034 PMIC" depends on PMIC_DA903X diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 075835be4396..7c59bcb10613 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o +obj-$(CONFIG_REGULATOR_WM8994) += wm8994-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o diff --git a/drivers/regulator/wm8994-regulator.c b/drivers/regulator/wm8994-regulator.c new file mode 100644 index 000000000000..d09e018b3177 --- /dev/null +++ b/drivers/regulator/wm8994-regulator.c @@ -0,0 +1,304 @@ +/* + * wm8994-regulator.c -- Regulator driver for the WM8994 + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/bitops.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/gpio.h> + +#include <linux/mfd/wm8994/core.h> +#include <linux/mfd/wm8994/registers.h> +#include <linux/mfd/wm8994/pdata.h> + +struct wm8994_ldo { + int enable; + int is_enabled; + struct regulator_dev *regulator; + struct wm8994 *wm8994; +}; + +#define WM8994_LDO1_MAX_SELECTOR 0x7 +#define WM8994_LDO2_MAX_SELECTOR 0x3 + +static int wm8994_ldo_enable(struct regulator_dev *rdev) +{ + struct wm8994_ldo *ldo = rdev_get_drvdata(rdev); + + /* If we have no soft control assume that the LDO is always enabled. */ + if (!ldo->enable) + return 0; + + gpio_set_value(ldo->enable, 1); + ldo->is_enabled = 1; + + return 0; +} + +static int wm8994_ldo_disable(struct regulator_dev *rdev) +{ + struct wm8994_ldo *ldo = rdev_get_drvdata(rdev); + + /* If we have no soft control assume that the LDO is always enabled. */ + if (!ldo->enable) + return -EINVAL; + + gpio_set_value(ldo->enable, 0); + ldo->is_enabled = 0; + + return 0; +} + +static int wm8994_ldo_is_enabled(struct regulator_dev *rdev) +{ + struct wm8994_ldo *ldo = rdev_get_drvdata(rdev); + + return ldo->is_enabled; +} + +static int wm8994_ldo_enable_time(struct regulator_dev *rdev) +{ + /* 3ms is fairly conservative but this shouldn't be too performance + * critical; can be tweaked per-system if required. */ + return 3000; +} + +static int wm8994_ldo1_list_voltage(struct regulator_dev *rdev, + unsigned int selector) +{ + if (selector > WM8994_LDO1_MAX_SELECTOR) + return -EINVAL; + + return (selector * 100000) + 2400000; +} + +static int wm8994_ldo1_get_voltage(struct regulator_dev *rdev) +{ + struct wm8994_ldo *ldo = rdev_get_drvdata(rdev); + int val; + + val = wm8994_reg_read(ldo->wm8994, WM8994_LDO_1); + if (val < 0) + return val; + + val = (val & WM8994_LDO1_VSEL_MASK) >> WM8994_LDO1_VSEL_SHIFT; + + return wm8994_ldo1_list_voltage(rdev, val); +} + +static int wm8994_ldo1_set_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct wm8994_ldo *ldo = rdev_get_drvdata(rdev); + int selector, v; + + selector = (min_uV - 2400000) / 100000; + v = wm8994_ldo1_list_voltage(rdev, selector); + if (v < 0 || v > max_uV) + return -EINVAL; + + selector <<= WM8994_LDO1_VSEL_SHIFT; + + return wm8994_set_bits(ldo->wm8994, WM8994_LDO_1, + WM8994_LDO1_VSEL_MASK, selector); +} + +static struct regulator_ops wm8994_ldo1_ops = { + .enable = wm8994_ldo_enable, + .disable = wm8994_ldo_disable, + .is_enabled = wm8994_ldo_is_enabled, + .enable_time = wm8994_ldo_enable_time, + + .list_voltage = wm8994_ldo1_list_voltage, + .get_voltage = wm8994_ldo1_get_voltage, + .set_voltage = wm8994_ldo1_set_voltage, +}; + +static int wm8994_ldo2_list_voltage(struct regulator_dev *rdev, + unsigned int selector) +{ + if (selector > WM8994_LDO2_MAX_SELECTOR) + return -EINVAL; + + return (selector * 100000) + 900000; +} + +static int wm8994_ldo2_get_voltage(struct regulator_dev *rdev) +{ + struct wm8994_ldo *ldo = rdev_get_drvdata(rdev); + int val; + + val = wm8994_reg_read(ldo->wm8994, WM8994_LDO_2); + if (val < 0) + return val; + + val = (val & WM8994_LDO2_VSEL_MASK) >> WM8994_LDO2_VSEL_SHIFT; + + return wm8994_ldo2_list_voltage(rdev, val); +} + +static int wm8994_ldo2_set_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct wm8994_ldo *ldo = rdev_get_drvdata(rdev); + int selector, v; + + selector = (min_uV - 900000) / 100000; + v = wm8994_ldo2_list_voltage(rdev, selector); + if (v < 0 || v > max_uV) + return -EINVAL; + + selector <<= WM8994_LDO2_VSEL_SHIFT; + + return wm8994_set_bits(ldo->wm8994, WM8994_LDO_2, + WM8994_LDO2_VSEL_MASK, selector); +} + +static struct regulator_ops wm8994_ldo2_ops = { + .enable = wm8994_ldo_enable, + .disable = wm8994_ldo_disable, + .is_enabled = wm8994_ldo_is_enabled, + .enable_time = wm8994_ldo_enable_time, + + .list_voltage = wm8994_ldo2_list_voltage, + .get_voltage = wm8994_ldo2_get_voltage, + .set_voltage = wm8994_ldo2_set_voltage, +}; + +static struct regulator_desc wm8994_ldo_desc[] = { + { + .name = "LDO1", + .id = 1, + .type = REGULATOR_VOLTAGE, + .n_voltages = WM8994_LDO1_MAX_SELECTOR + 1, + .ops = &wm8994_ldo1_ops, + .owner = THIS_MODULE, + }, + { + .name = "LDO2", + .id = 2, + .type = REGULATOR_VOLTAGE, + .n_voltages = WM8994_LDO2_MAX_SELECTOR + 1, + .ops = &wm8994_ldo2_ops, + .owner = THIS_MODULE, + }, +}; + +static __devinit int wm8994_ldo_probe(struct platform_device *pdev) +{ + struct wm8994 *wm8994 = dev_get_drvdata(pdev->dev.parent); + struct wm8994_pdata *pdata = wm8994->dev->platform_data; + int id = pdev->id % ARRAY_SIZE(pdata->ldo); + struct wm8994_ldo *ldo; + int ret; + + dev_dbg(&pdev->dev, "Probing LDO%d\n", id + 1); + + if (!pdata) + return -ENODEV; + + ldo = kzalloc(sizeof(struct wm8994_ldo), GFP_KERNEL); + if (ldo == NULL) { + dev_err(&pdev->dev, "Unable to allocate private data\n"); + return -ENOMEM; + } + + ldo->wm8994 = wm8994; + + ldo->is_enabled = 1; + + if (pdata->ldo[id].enable && gpio_is_valid(pdata->ldo[id].enable)) { + ldo->enable = pdata->ldo[id].enable; + + ret = gpio_request(ldo->enable, "WM8994 LDO enable"); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to get enable GPIO: %d\n", + ret); + goto err; + } + + ret = gpio_direction_output(ldo->enable, ldo->is_enabled); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to set GPIO up: %d\n", + ret); + goto err_gpio; + } + } + + ldo->regulator = regulator_register(&wm8994_ldo_desc[id], &pdev->dev, + pdata->ldo[id].init_data, ldo); + if (IS_ERR(ldo->regulator)) { + ret = PTR_ERR(ldo->regulator); + dev_err(wm8994->dev, "Failed to register LDO%d: %d\n", + id + 1, ret); + goto err_gpio; + } + + platform_set_drvdata(pdev, ldo); + + return 0; + +err_gpio: + if (gpio_is_valid(ldo->enable)) + gpio_free(ldo->enable); +err: + kfree(ldo); + return ret; +} + +static __devexit int wm8994_ldo_remove(struct platform_device *pdev) +{ + struct wm8994_ldo *ldo = platform_get_drvdata(pdev); + + regulator_unregister(ldo->regulator); + if (gpio_is_valid(ldo->enable)) + gpio_free(ldo->enable); + kfree(ldo); + + return 0; +} + +static struct platform_driver wm8994_ldo_driver = { + .probe = wm8994_ldo_probe, + .remove = __devexit_p(wm8994_ldo_remove), + .driver = { + .name = "wm8994-ldo", + }, +}; + +static int __init wm8994_ldo_init(void) +{ + int ret; + + ret = platform_driver_register(&wm8994_ldo_driver); + if (ret != 0) + pr_err("Failed to register Wm8994 GP LDO driver: %d\n", ret); + + return ret; +} +subsys_initcall(wm8994_ldo_init); + +static void __exit wm8994_ldo_exit(void) +{ + platform_driver_unregister(&wm8994_ldo_driver); +} +module_exit(wm8994_ldo_exit); + +/* Module information */ +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_DESCRIPTION("WM8994 LDO driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm8994-ldo"); |