diff options
| -rw-r--r-- | Documentation/kernel-parameters.txt | 5 | ||||
| -rw-r--r-- | arch/i386/kernel/Makefile | 1 | ||||
| -rw-r--r-- | arch/i386/kernel/legacy_serial.c | 67 | ||||
| -rw-r--r-- | arch/x86_64/kernel/Makefile | 2 | ||||
| -rw-r--r-- | drivers/serial/Kconfig | 14 | ||||
| -rw-r--r-- | include/asm-i386/serial.h | 16 | ||||
| -rw-r--r-- | include/asm-x86_64/serial.h | 16 |
7 files changed, 37 insertions, 84 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index af50f9bbe68e..026e4e5d9b23 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -850,11 +850,6 @@ and is between 256 and 4096 characters. It is defined in the file lasi= [HW,SCSI] PARISC LASI driver for the 53c700 chip Format: addr:<io>,irq:<irq> - legacy_serial.force [HW,IA-32,X86-64] - Probe for COM ports at legacy addresses even - if PNPBIOS or ACPI should describe them. This - is for working around firmware defects. - llsc*= [IA64] See function print_params() in arch/ia64/sn/kernel/llsc4.c. diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile index 06da59f6f837..e9297cbfb6b9 100644 --- a/arch/i386/kernel/Makefile +++ b/arch/i386/kernel/Makefile @@ -35,7 +35,6 @@ obj-y += sysenter.o vsyscall.o obj-$(CONFIG_ACPI_SRAT) += srat.o obj-$(CONFIG_EFI) += efi.o efi_stub.o obj-$(CONFIG_DOUBLEFAULT) += doublefault.o -obj-$(CONFIG_SERIAL_8250) += legacy_serial.o obj-$(CONFIG_VM86) += vm86.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_HPET_TIMER) += hpet.o diff --git a/arch/i386/kernel/legacy_serial.c b/arch/i386/kernel/legacy_serial.c deleted file mode 100644 index 21510118544e..000000000000 --- a/arch/i386/kernel/legacy_serial.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * Legacy COM port devices for x86 platforms without PNPBIOS or ACPI. - * Data taken from include/asm-i386/serial.h. - * - * (c) Copyright 2007 Hewlett-Packard Development Company, L.P. - * Bjorn Helgaas <bjorn.helgaas@hp.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/module.h> -#include <linux/init.h> -#include <linux/pnp.h> -#include <linux/serial_8250.h> - -/* Standard COM flags (except for COM4, because of the 8514 problem) */ -#ifdef CONFIG_SERIAL_DETECT_IRQ -#define COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ) -#define COM4_FLAGS (UPF_BOOT_AUTOCONF | UPF_AUTO_IRQ) -#else -#define COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST) -#define COM4_FLAGS UPF_BOOT_AUTOCONF -#endif - -#define PORT(_base,_irq,_flags) \ - { \ - .iobase = _base, \ - .irq = _irq, \ - .uartclk = 1843200, \ - .iotype = UPIO_PORT, \ - .flags = _flags, \ - } - -static struct plat_serial8250_port x86_com_data[] = { - PORT(0x3F8, 4, COM_FLAGS), - PORT(0x2F8, 3, COM_FLAGS), - PORT(0x3E8, 4, COM_FLAGS), - PORT(0x2E8, 3, COM4_FLAGS), - { }, -}; - -static struct platform_device x86_com_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = x86_com_data, - }, -}; - -static int force_legacy_probe; -module_param_named(force, force_legacy_probe, bool, 0); -MODULE_PARM_DESC(force, "Force legacy serial port probe"); - -static int __init serial8250_x86_com_init(void) -{ - if (pnp_platform_devices && !force_legacy_probe) - return -ENODEV; - - return platform_device_register(&x86_com_device); -} - -module_init(serial8250_x86_com_init); - -MODULE_AUTHOR("Bjorn Helgaas"); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Generic 8250/16x50 legacy probe module"); diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile index de1de8a2fd84..4d94c51803d8 100644 --- a/arch/x86_64/kernel/Makefile +++ b/arch/x86_64/kernel/Makefile @@ -32,7 +32,6 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_IOMMU) += pci-gart.o aperture.o obj-$(CONFIG_CALGARY_IOMMU) += pci-calgary.o tce.o obj-$(CONFIG_SWIOTLB) += pci-swiotlb.o -obj-$(CONFIG_SERIAL_8250) += legacy_serial.o obj-$(CONFIG_KPROBES) += kprobes.o obj-$(CONFIG_X86_PM_TIMER) += pmtimer.o obj-$(CONFIG_X86_VSMP) += vsmp.o @@ -50,7 +49,6 @@ CFLAGS_vsyscall.o := $(PROFILING) -g0 therm_throt-y += ../../i386/kernel/cpu/mcheck/therm_throt.o bootflag-y += ../../i386/kernel/bootflag.o -legacy_serial-y += ../../i386/kernel/legacy_serial.o cpuid-$(subst m,y,$(CONFIG_X86_CPUID)) += ../../i386/kernel/cpuid.o topology-y += ../../i386/kernel/topology.o microcode-$(subst m,y,$(CONFIG_MICROCODE)) += ../../i386/kernel/microcode.o diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 315ea9916456..a288de520c5a 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -74,21 +74,17 @@ config SERIAL_8250_PCI depends on SERIAL_8250 && PCI default SERIAL_8250 help - Say Y here if you have PCI serial ports. - - To compile this driver as a module, choose M here: the module - will be called 8250_pci. + This builds standard PCI serial support. You may be able to + disable this feature if you only need legacy serial support. + Saves about 9K. config SERIAL_8250_PNP tristate "8250/16550 PNP device support" if EMBEDDED depends on SERIAL_8250 && PNP default SERIAL_8250 help - Say Y here if you have serial ports described by PNPBIOS or ACPI. - These are typically ports built into the system board. - - To compile this driver as a module, choose M here: the module - will be called 8250_pnp. + This builds standard PNP serial support. You may be able to + disable this feature if you only need legacy serial support. config SERIAL_8250_HP300 tristate diff --git a/include/asm-i386/serial.h b/include/asm-i386/serial.h index 57a4306cdf63..bd67480ca109 100644 --- a/include/asm-i386/serial.h +++ b/include/asm-i386/serial.h @@ -11,3 +11,19 @@ * megabits/second; but this requires the faster clock. */ #define BASE_BAUD ( 1843200 / 16 ) + +/* Standard COM flags (except for COM4, because of the 8514 problem) */ +#ifdef CONFIG_SERIAL_DETECT_IRQ +#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ) +#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ) +#else +#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) +#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF +#endif + +#define SERIAL_PORT_DFNS \ + /* UART CLK PORT IRQ FLAGS */ \ + { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \ + { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \ + { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \ + { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */ diff --git a/include/asm-x86_64/serial.h b/include/asm-x86_64/serial.h index 8ebd765c674a..b0496e0d72a6 100644 --- a/include/asm-x86_64/serial.h +++ b/include/asm-x86_64/serial.h @@ -11,3 +11,19 @@ * megabits/second; but this requires the faster clock. */ #define BASE_BAUD ( 1843200 / 16 ) + +/* Standard COM flags (except for COM4, because of the 8514 problem) */ +#ifdef CONFIG_SERIAL_DETECT_IRQ +#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ) +#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ) +#else +#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) +#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF +#endif + +#define SERIAL_PORT_DFNS \ + /* UART CLK PORT IRQ FLAGS */ \ + { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \ + { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \ + { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \ + { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */ |