summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/Kconfig1
-rw-r--r--arch/arm/mach-davinci/include/mach/gpio-davinci.h90
-rw-r--r--arch/arm/mach-davinci/include/mach/gpio.h88
-rw-r--r--drivers/gpio/gpio-tnetv107x.c1
-rw-r--r--include/linux/platform_data/gpio-davinci.h35
5 files changed, 36 insertions, 179 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3f7714d8d2d2..ad3767095422 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -847,7 +847,6 @@ config ARCH_DAVINCI
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select HAVE_IDE
- select NEED_MACH_GPIO_H
select TI_PRIV_EDMA
select USE_OF
select ZONE_DMA
diff --git a/arch/arm/mach-davinci/include/mach/gpio-davinci.h b/arch/arm/mach-davinci/include/mach/gpio-davinci.h
deleted file mode 100644
index 0d63b24cefc9..000000000000
--- a/arch/arm/mach-davinci/include/mach/gpio-davinci.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * TI DaVinci GPIO Support
- *
- * Copyright (c) 2006 David Brownell
- * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __DAVINCI_DAVINCI_GPIO_H
-#define __DAVINCI_DAVINCI_GPIO_H
-
-#include <linux/io.h>
-#include <linux/spinlock.h>
-
-#include <asm-generic/gpio.h>
-
-#include <mach/irqs.h>
-#include <mach/common.h>
-
-enum davinci_gpio_type {
- GPIO_TYPE_DAVINCI = 0,
- GPIO_TYPE_TNETV107X,
-};
-
-/*
- * basic gpio routines
- *
- * board-specific init should be done by arch/.../.../board-XXX.c (maybe
- * initializing banks together) rather than boot loaders; kexec() won't
- * go through boot loaders.
- *
- * the gpio clock will be turned on when gpios are used, and you may also
- * need to pay attention to PINMUX registers to be sure those pins are
- * used as gpios, not with other peripherals.
- *
- * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation,
- * and maybe for later updates, code may write GPIO(N). These may be
- * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip
- * may not support all the GPIOs in that range.
- *
- * GPIOs can also be on external chips, numbered after the ones built-in
- * to the DaVinci chip. For now, they won't be usable as IRQ sources.
- */
-#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */
-
-/* Convert GPIO signal to GPIO pin number */
-#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio))
-
-struct davinci_gpio_controller {
- struct gpio_chip chip;
- int irq_base;
- spinlock_t lock;
- void __iomem *regs;
- void __iomem *set_data;
- void __iomem *clr_data;
- void __iomem *in_data;
- unsigned gpio_irq;
-};
-
-/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
- * with constant parameters; or in outlined code they execute at runtime.
- *
- * You'd access the controller directly when reading or writing more than
- * one gpio value at a time, and to support wired logic where the value
- * being driven by the cpu need not match the value read back.
- *
- * These are NOT part of the cross-platform GPIO interface
- */
-static inline struct davinci_gpio_controller *
-__gpio_to_controller(unsigned gpio)
-{
- struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs;
- int index = gpio / 32;
-
- if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num)
- return NULL;
-
- return ctlrs + index;
-}
-
-static inline u32 __gpio_mask(unsigned gpio)
-{
- return 1 << (gpio % 32);
-}
-
-#endif /* __DAVINCI_DAVINCI_GPIO_H */
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
deleted file mode 100644
index 960e9de47e1e..000000000000
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * TI DaVinci GPIO Support
- *
- * Copyright (c) 2006 David Brownell
- * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __DAVINCI_GPIO_H
-#define __DAVINCI_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#define __ARM_GPIOLIB_COMPLEX
-
-/* The inline versions use the static inlines in the driver header */
-#include "gpio-davinci.h"
-
-/*
- * The get/set/clear functions will inline when called with constant
- * parameters referencing built-in GPIOs, for low-overhead bitbanging.
- *
- * gpio_set_value() will inline only on traditional Davinci style controllers
- * with distinct set/clear registers.
- *
- * Otherwise, calls with variable parameters or referencing external
- * GPIOs (e.g. on GPIO expander chips) use outlined functions.
- */
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- if (__builtin_constant_p(value) && gpio < davinci_soc_info.gpio_num) {
- struct davinci_gpio_controller *ctlr;
- u32 mask;
-
- ctlr = __gpio_to_controller(gpio);
-
- if (ctlr->set_data != ctlr->clr_data) {
- mask = __gpio_mask(gpio);
- if (value)
- __raw_writel(mask, ctlr->set_data);
- else
- __raw_writel(mask, ctlr->clr_data);
- return;
- }
- }
-
- __gpio_set_value(gpio, value);
-}
-
-/* Returns zero or nonzero; works for gpios configured as inputs OR
- * as outputs, at least for built-in GPIOs.
- *
- * NOTE: for built-in GPIOs, changes in reported values are synchronized
- * to the GPIO clock. This is easily seen after calling gpio_set_value()
- * and then immediately gpio_get_value(), where the gpio_get_value() will
- * return the old value until the GPIO clock ticks and the new value gets
- * latched.
- */
-static inline int gpio_get_value(unsigned gpio)
-{
- struct davinci_gpio_controller *ctlr;
-
- if (!__builtin_constant_p(gpio) || gpio >= davinci_soc_info.gpio_num)
- return __gpio_get_value(gpio);
-
- ctlr = __gpio_to_controller(gpio);
- return __gpio_mask(gpio) & __raw_readl(ctlr->in_data);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
- if (__builtin_constant_p(gpio) && gpio < davinci_soc_info.gpio_num)
- return 0;
- else
- return __gpio_cansleep(gpio);
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
- /* don't support the reverse mapping */
- return -ENOSYS;
-}
-
-#endif /* __DAVINCI_GPIO_H */
diff --git a/drivers/gpio/gpio-tnetv107x.c b/drivers/gpio/gpio-tnetv107x.c
index 3fa3e2867e19..58445bb69106 100644
--- a/drivers/gpio/gpio-tnetv107x.c
+++ b/drivers/gpio/gpio-tnetv107x.c
@@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/gpio.h>
+#include <linux/platform_data/gpio-davinci.h>
#include <mach/common.h>
#include <mach/tnetv107x.h>
diff --git a/include/linux/platform_data/gpio-davinci.h b/include/linux/platform_data/gpio-davinci.h
index 2fcc125af1aa..6efd20264585 100644
--- a/include/linux/platform_data/gpio-davinci.h
+++ b/include/linux/platform_data/gpio-davinci.h
@@ -16,10 +16,45 @@
#ifndef __DAVINCI_GPIO_PLATFORM_H
#define __DAVINCI_GPIO_PLATFORM_H
+#include <linux/io.h>
+#include <linux/spinlock.h>
+
+#include <asm-generic/gpio.h>
+
+enum davinci_gpio_type {
+ GPIO_TYPE_TNETV107X = 0,
+};
+
struct davinci_gpio_platform_data {
u32 ngpio;
u32 gpio_unbanked;
u32 intc_irq_num;
};
+
+struct davinci_gpio_controller {
+ struct gpio_chip chip;
+ int irq_base;
+ /* Serialize access to GPIO registers */
+ spinlock_t lock;
+ void __iomem *regs;
+ void __iomem *set_data;
+ void __iomem *clr_data;
+ void __iomem *in_data;
+ int gpio_unbanked;
+ unsigned gpio_irq;
+};
+
+/*
+ * basic gpio routines
+ */
+#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */
+
+/* Convert GPIO signal to GPIO pin number */
+#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio))
+
+static inline u32 __gpio_mask(unsigned gpio)
+{
+ return 1 << (gpio % 32);
+}
#endif