diff options
| -rw-r--r-- | drivers/usb/serial/pl2303.c | 95 |
1 files changed, 23 insertions, 72 deletions
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index e7a84f0f5179..409000a836dd 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -134,17 +134,10 @@ MODULE_DEVICE_TABLE(usb, id_table); enum pl2303_type { - type_0, /* H version ? */ - type_1, /* H version ? */ - HX_TA, /* HX(A) / X(A) / TA version */ /* TODO: improve */ - HXD_EA_RA_SA, /* HXD / EA / RA / SA version */ /* TODO: improve */ - TB, /* TB version */ + type_0, /* don't know the difference between type 0 and */ + type_1, /* type 1, until someone from prolific tells us... */ + HX, /* HX version of the pl2303 chip */ }; -/* - * NOTE: don't know the difference between type 0 and type 1, - * until someone from Prolific tells us... - * TODO: distinguish between X/HX, TA and HXD, EA, RA, SA variants - */ struct pl2303_serial_private { enum pl2303_type type; @@ -201,28 +194,8 @@ static int pl2303_startup(struct usb_serial *serial) type = type_0; type_str = "type_0"; } else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40) { - /* - * NOTE: The bcdDevice version is the only difference between - * the device descriptors of the X/HX, HXD, EA, RA, SA, TA, TB - */ - if (le16_to_cpu(serial->dev->descriptor.bcdDevice) == 0x300) { - type = HX_TA; - type_str = "X/HX/TA"; - } else if (le16_to_cpu(serial->dev->descriptor.bcdDevice) - == 0x400) { - type = HXD_EA_RA_SA; - type_str = "HXD/EA/RA/SA"; - } else if (le16_to_cpu(serial->dev->descriptor.bcdDevice) - == 0x500) { - type = TB; - type_str = "TB"; - } else { - dev_info(&serial->interface->dev, - "unknown/unsupported device type\n"); - kfree(spriv); - kfree(buf); - return -ENODEV; - } + type = HX; + type_str = "X/HX"; } else if (serial->dev->descriptor.bDeviceClass == 0x00 || serial->dev->descriptor.bDeviceClass == 0xFF) { type = type_1; @@ -243,10 +216,10 @@ static int pl2303_startup(struct usb_serial *serial) pl2303_vendor_read(0x8383, 0, serial, buf); pl2303_vendor_write(0, 1, serial); pl2303_vendor_write(1, 0, serial); - if (type == type_0 || type == type_1) - pl2303_vendor_write(2, 0x24, serial); - else + if (type == HX) pl2303_vendor_write(2, 0x44, serial); + else + pl2303_vendor_write(2, 0x24, serial); kfree(buf); return 0; @@ -311,19 +284,12 @@ static int pl2303_baudrate_encode_direct(int baud, enum pl2303_type type, const int baud_sup[] = { 75, 150, 300, 600, 1200, 1800, 2400, 3600, 4800, 7200, 9600, 14400, 19200, 28800, 38400, 57600, 115200, 230400, 460800, 614400, 921600, - 1228800, 2457600, 3000000, 6000000, 12000000 }; + 1228800, 2457600, 3000000, 6000000 }; /* - * NOTE: With the exception of type_0/1 devices, the following - * additional baud rates are supported (tested with HX rev. 3A only): - * 110*, 56000*, 128000, 134400, 161280, 201600, 256000*, 268800, - * 403200, 806400. (*: not HX) - * - * Maximum values: HXD, TB: 12000000; HX, TA: 6000000; - * type_0+1: 1228800; RA: 921600; SA: 115200 - * - * As long as we are not using this encoding method for anything else - * than the type_0+1 and HX chips, there is no point in complicating - * the code to support them. + * NOTE: The PL2303HX (tested with rev. 3A) also supports the following + * baud rates: 128000, 134400, 161280, 201600, 268800, 403200, 806400. + * As long as we are not using this encoding method for them, there is + * no point in complicating the code to support them. */ int i; @@ -338,14 +304,8 @@ static int pl2303_baudrate_encode_direct(int baud, enum pl2303_type type, baud = baud_sup[i - 1]; else baud = baud_sup[i]; - /* Respect the chip type specific baud rate limits */ - /* - * FIXME: as long as we don't know how to distinguish between the - * HXD, EA, RA, and SA chip variants, allow the max. value of 12M. - */ - if (type == HX_TA) - baud = min_t(int, baud, 6000000); - else if (type == type_0 || type == type_1) + /* type_0, type_1 only support up to 1228800 baud */ + if (type != HX) baud = min_t(int, baud, 1228800); /* Direct (standard) baud rate encoding method */ put_unaligned_le32(baud, buf); @@ -384,19 +344,10 @@ static int pl2303_baudrate_encode_divisor(int baud, enum pl2303_type type, * Baud rates smaller than the specified 75 baud are definitely working * fine. */ - if (type == type_0 || type == type_1) - baud = min_t(int, baud, 1228800 * 1.1); - else if (type == HX_TA) + if (type == HX) baud = min_t(int, baud, 6000000 * 1.1); - else if (type == HXD_EA_RA_SA) - /* HXD, EA: 12Mbps; RA: 1Mbps; SA: 115200 bps */ - /* - * FIXME: as long as we don't know how to distinguish between - * these chip variants, allow the max. of these values - */ - baud = min_t(int, baud, 12000000 * 1.1); - else if (type == TB) - baud = min_t(int, baud, 12000000 * 1.1); + else + baud = min_t(int, baud, 1228800 * 1.1); /* Determine factors A and B */ A = 0; B = 12000000 * 32 / baud; /* 12MHz */ @@ -460,7 +411,7 @@ static void pl2303_encode_baudrate(struct tty_struct *tty, * the device likely uses the same baud rate generator for both methods * so that there is likley no difference. */ - if (type == type_0 || type == type_1) + if (type != HX) baud = pl2303_baudrate_encode_direct(baud, type, buf); else baud = pl2303_baudrate_encode_divisor(baud, type, buf); @@ -598,10 +549,10 @@ static void pl2303_set_termios(struct tty_struct *tty, dev_dbg(&port->dev, "0xa1:0x21:0:0 %d - %7ph\n", i, buf); if (C_CRTSCTS(tty)) { - if (spriv->type == type_0 || spriv->type == type_1) - pl2303_vendor_write(0x0, 0x41, serial); - else + if (spriv->type == HX) pl2303_vendor_write(0x0, 0x61, serial); + else + pl2303_vendor_write(0x0, 0x41, serial); } else { pl2303_vendor_write(0x0, 0x0, serial); } @@ -638,7 +589,7 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port) struct pl2303_serial_private *spriv = usb_get_serial_data(serial); int result; - if (spriv->type == type_0 || spriv->type == type_1) { + if (spriv->type != HX) { usb_clear_halt(serial->dev, port->write_urb->pipe); usb_clear_halt(serial->dev, port->read_urb->pipe); } else { |