diff options
| -rw-r--r-- | Documentation/usb/power-management.txt | 14 | ||||
| -rw-r--r-- | drivers/usb/core/driver.c | 13 | ||||
| -rw-r--r-- | drivers/usb/storage/realtek_cr.c | 13 | ||||
| -rw-r--r-- | include/linux/usb.h | 2 |
4 files changed, 14 insertions, 28 deletions
diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt index 0a94ffe17ab6..b13e031beaa6 100644 --- a/Documentation/usb/power-management.txt +++ b/Documentation/usb/power-management.txt @@ -365,11 +365,15 @@ autosuspend the interface's device. When the usage counter is = 0 then the interface is considered to be idle, and the kernel may autosuspend the device. -Drivers need not be concerned about balancing changes to the usage -counter; the USB core will undo any remaining "get"s when a driver -is unbound from its interface. As a corollary, drivers must not call -any of the usb_autopm_* functions after their disconnect() routine has -returned. +Drivers must be careful to balance their overall changes to the usage +counter. Unbalanced "get"s will remain in effect when a driver is +unbound from its interface, preventing the device from going into +runtime suspend should the interface be bound to a driver again. On +the other hand, drivers are allowed to achieve this balance by calling +the ``usb_autopm_*`` functions even after their ``disconnect`` routine +has returned -- say from within a work-queue routine -- provided they +retain an active reference to the interface (via ``usb_get_intf`` and +``usb_put_intf``). Drivers using the async routines are responsible for their own synchronization and mutual exclusion. diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index c17b254e4f64..654199c6a36c 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -470,11 +470,6 @@ static int usb_unbind_interface(struct device *dev) pm_runtime_disable(dev); pm_runtime_set_suspended(dev); - /* Undo any residual pm_autopm_get_interface_* calls */ - for (r = atomic_read(&intf->pm_usage_cnt); r > 0; --r) - usb_autopm_put_interface_no_suspend(intf); - atomic_set(&intf->pm_usage_cnt, 0); - if (!error) usb_autosuspend_device(udev); @@ -1625,7 +1620,6 @@ void usb_autopm_put_interface(struct usb_interface *intf) int status; usb_mark_last_busy(udev); - atomic_dec(&intf->pm_usage_cnt); status = pm_runtime_put_sync(&intf->dev); dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n", __func__, atomic_read(&intf->dev.power.usage_count), @@ -1654,7 +1648,6 @@ void usb_autopm_put_interface_async(struct usb_interface *intf) int status; usb_mark_last_busy(udev); - atomic_dec(&intf->pm_usage_cnt); status = pm_runtime_put(&intf->dev); dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n", __func__, atomic_read(&intf->dev.power.usage_count), @@ -1676,7 +1669,6 @@ void usb_autopm_put_interface_no_suspend(struct usb_interface *intf) struct usb_device *udev = interface_to_usbdev(intf); usb_mark_last_busy(udev); - atomic_dec(&intf->pm_usage_cnt); pm_runtime_put_noidle(&intf->dev); } EXPORT_SYMBOL_GPL(usb_autopm_put_interface_no_suspend); @@ -1707,8 +1699,6 @@ int usb_autopm_get_interface(struct usb_interface *intf) status = pm_runtime_get_sync(&intf->dev); if (status < 0) pm_runtime_put_sync(&intf->dev); - else - atomic_inc(&intf->pm_usage_cnt); dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n", __func__, atomic_read(&intf->dev.power.usage_count), status); @@ -1742,8 +1732,6 @@ int usb_autopm_get_interface_async(struct usb_interface *intf) status = pm_runtime_get(&intf->dev); if (status < 0 && status != -EINPROGRESS) pm_runtime_put_noidle(&intf->dev); - else - atomic_inc(&intf->pm_usage_cnt); dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n", __func__, atomic_read(&intf->dev.power.usage_count), status); @@ -1767,7 +1755,6 @@ void usb_autopm_get_interface_no_resume(struct usb_interface *intf) struct usb_device *udev = interface_to_usbdev(intf); usb_mark_last_busy(udev); - atomic_inc(&intf->pm_usage_cnt); pm_runtime_get_noresume(&intf->dev); } EXPORT_SYMBOL_GPL(usb_autopm_get_interface_no_resume); diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c index 4176d1af9bf2..fac3447021b2 100644 --- a/drivers/usb/storage/realtek_cr.c +++ b/drivers/usb/storage/realtek_cr.c @@ -776,18 +776,16 @@ static void rts51x_suspend_timer_fn(unsigned long data) break; case RTS51X_STAT_IDLE: case RTS51X_STAT_SS: - usb_stor_dbg(us, "RTS51X_STAT_SS, intf->pm_usage_cnt:%d, power.usage:%d\n", - atomic_read(&us->pusb_intf->pm_usage_cnt), + usb_stor_dbg(us, "RTS51X_STAT_SS, power.usage:%d\n", atomic_read(&us->pusb_intf->dev.power.usage_count)); - if (atomic_read(&us->pusb_intf->pm_usage_cnt) > 0) { + if (atomic_read(&us->pusb_intf->dev.power.usage_count) > 0) { usb_stor_dbg(us, "Ready to enter SS state\n"); rts51x_set_stat(chip, RTS51X_STAT_SS); /* ignore mass storage interface's children */ pm_suspend_ignore_children(&us->pusb_intf->dev, true); usb_autopm_put_interface_async(us->pusb_intf); - usb_stor_dbg(us, "RTS51X_STAT_SS 01, intf->pm_usage_cnt:%d, power.usage:%d\n", - atomic_read(&us->pusb_intf->pm_usage_cnt), + usb_stor_dbg(us, "RTS51X_STAT_SS 01, power.usage:%d\n", atomic_read(&us->pusb_intf->dev.power.usage_count)); } break; @@ -820,11 +818,10 @@ static void rts51x_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) int ret; if (working_scsi(srb)) { - usb_stor_dbg(us, "working scsi, intf->pm_usage_cnt:%d, power.usage:%d\n", - atomic_read(&us->pusb_intf->pm_usage_cnt), + usb_stor_dbg(us, "working scsi, power.usage:%d\n", atomic_read(&us->pusb_intf->dev.power.usage_count)); - if (atomic_read(&us->pusb_intf->pm_usage_cnt) <= 0) { + if (atomic_read(&us->pusb_intf->dev.power.usage_count) <= 0) { ret = usb_autopm_get_interface(us->pusb_intf); usb_stor_dbg(us, "working scsi, ret=%d\n", ret); } diff --git a/include/linux/usb.h b/include/linux/usb.h index 346665a0c49d..9b5ca59271d9 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -129,7 +129,6 @@ enum usb_interface_condition { * @dev: driver model's view of this device * @usb_dev: if an interface is bound to the USB major, this will point * to the sysfs representation for that device. - * @pm_usage_cnt: PM usage counter for this interface * @reset_ws: Used for scheduling resets from atomic context. * @resetting_device: USB core reset the device, so use alt setting 0 as * current; needs bandwidth alloc after reset. @@ -186,7 +185,6 @@ struct usb_interface { struct device dev; /* interface specific device info */ struct device *usb_dev; - atomic_t pm_usage_cnt; /* usage counter for autosuspend */ struct work_struct reset_ws; /* for resets in atomic context */ }; #define to_usb_interface(d) container_of(d, struct usb_interface, dev) |