summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/leds/leds-lp8860.txt29
-rw-r--r--drivers/leds/Kconfig10
-rw-r--r--drivers/leds/Makefile1
-rw-r--r--drivers/leds/leds-lp8860.c491
4 files changed, 531 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/leds/leds-lp8860.txt b/Documentation/devicetree/bindings/leds/leds-lp8860.txt
new file mode 100644
index 000000000000..aad38dd94d4b
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lp8860.txt
@@ -0,0 +1,29 @@
+* Texas Instruments - lp8860 4-Channel LED Driver
+
+The LP8860-Q1 is an high-efficiency LED
+driver with boost controller. It has 4 high-precision
+current sinks that can be controlled by a PWM input
+signal, a SPI/I2C master, or both.
+
+Required properties:
+ - compatible:
+ "ti,lp8860"
+ - reg - I2C slave address
+ - label - Used for naming LEDs
+
+Optional properties:
+ - enable-gpio - gpio pin to enable/disable the device.
+ - supply - "vled" - LED supply
+
+Example:
+
+leds: leds@6 {
+ compatible = "ti,lp8860";
+ reg = <0x2d>;
+ label = "display_cluster";
+ enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ vled-supply = <&vbatt>;
+}
+
+For more product information please see the link below:
+http://www.ti.com/product/lp8860-q1
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index a210338cfeb1..b0dce59f23e8 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -250,6 +250,16 @@ config LEDS_LP8788
help
This option enables support for the Keyboard LEDs on the LP8788 PMIC.
+config LEDS_LP8860
+ tristate "LED support for the TI LP8860 4 channel LED driver"
+ depends on LEDS_CLASS && REGMAP_I2C
+ help
+ If you say yes here you get support for the TI LP8860 4 channel
+ LED driver.
+ This option enables support for the display cluster LEDs
+ on the LP8860 4 channel LED driver using the I2C communication
+ bus.
+
config LEDS_CLEVO_MAIL
tristate "Mail LED on Clevo notebook"
depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index a2b164741465..1c65a191d907 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_LEDS_LP5523) += leds-lp5523.o
obj-$(CONFIG_LEDS_LP5562) += leds-lp5562.o
obj-$(CONFIG_LEDS_LP8501) += leds-lp8501.o
obj-$(CONFIG_LEDS_LP8788) += leds-lp8788.o
+obj-$(CONFIG_LEDS_LP8860) += leds-lp8860.o
obj-$(CONFIG_LEDS_TCA6507) += leds-tca6507.o
obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o
obj-$(CONFIG_LEDS_IPAQ_MICRO) += leds-ipaq-micro.o
diff --git a/drivers/leds/leds-lp8860.c b/drivers/leds/leds-lp8860.c
new file mode 100644
index 000000000000..840e93f3ab3e
--- /dev/null
+++ b/drivers/leds/leds-lp8860.c
@@ -0,0 +1,491 @@
+/*
+ * TI LP8860 4-Channel LED Driver
+ *
+ * Copyright (C) 2014 Texas Instruments
+ *
+ * Author: Dan Murphy <dmurphy@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/slab.h>
+
+#define LP8860_DISP_CL1_BRT_MSB 0x00
+#define LP8860_DISP_CL1_BRT_LSB 0x01
+#define LP8860_DISP_CL1_CURR_MSB 0x02
+#define LP8860_DISP_CL1_CURR_LSB 0x03
+#define LP8860_CL2_BRT_MSB 0x04
+#define LP8860_CL2_BRT_LSB 0x05
+#define LP8860_CL2_CURRENT 0x06
+#define LP8860_CL3_BRT_MSB 0x07
+#define LP8860_CL3_BRT_LSB 0x08
+#define LP8860_CL3_CURRENT 0x09
+#define LP8860_CL4_BRT_MSB 0x0a
+#define LP8860_CL4_BRT_LSB 0x0b
+#define LP8860_CL4_CURRENT 0x0c
+#define LP8860_CONFIG 0x0d
+#define LP8860_STATUS 0x0e
+#define LP8860_FAULT 0x0f
+#define LP8860_LED_FAULT 0x10
+#define LP8860_FAULT_CLEAR 0x11
+#define LP8860_ID 0x12
+#define LP8860_TEMP_MSB 0x13
+#define LP8860_TEMP_LSB 0x14
+#define LP8860_DISP_LED_CURR_MSB 0x15
+#define LP8860_DISP_LED_CURR_LSB 0x16
+#define LP8860_DISP_LED_PWM_MSB 0x17
+#define LP8860_DISP_LED_PWM_LSB 0x18
+#define LP8860_EEPROM_CNTRL 0x19
+#define LP8860_EEPROM_UNLOCK 0x1a
+
+#define LP8860_EEPROM_REG_0 0x60
+#define LP8860_EEPROM_REG_1 0x61
+#define LP8860_EEPROM_REG_2 0x62
+#define LP8860_EEPROM_REG_3 0x63
+#define LP8860_EEPROM_REG_4 0x64
+#define LP8860_EEPROM_REG_5 0x65
+#define LP8860_EEPROM_REG_6 0x66
+#define LP8860_EEPROM_REG_7 0x67
+#define LP8860_EEPROM_REG_8 0x68
+#define LP8860_EEPROM_REG_9 0x69
+#define LP8860_EEPROM_REG_10 0x6a
+#define LP8860_EEPROM_REG_11 0x6b
+#define LP8860_EEPROM_REG_12 0x6c
+#define LP8860_EEPROM_REG_13 0x6d
+#define LP8860_EEPROM_REG_14 0x6e
+#define LP8860_EEPROM_REG_15 0x6f
+#define LP8860_EEPROM_REG_16 0x70
+#define LP8860_EEPROM_REG_17 0x71
+#define LP8860_EEPROM_REG_18 0x72
+#define LP8860_EEPROM_REG_19 0x73
+#define LP8860_EEPROM_REG_20 0x74
+#define LP8860_EEPROM_REG_21 0x75
+#define LP8860_EEPROM_REG_22 0x76
+#define LP8860_EEPROM_REG_23 0x77
+#define LP8860_EEPROM_REG_24 0x78
+
+#define LP8860_LOCK_EEPROM 0x00
+#define LP8860_UNLOCK_EEPROM 0x01
+#define LP8860_PROGRAM_EEPROM 0x02
+#define LP8860_EEPROM_CODE_1 0x08
+#define LP8860_EEPROM_CODE_2 0xba
+#define LP8860_EEPROM_CODE_3 0xef
+
+#define LP8860_CLEAR_FAULTS 0x01
+
+#define LP8860_DISP_LED_NAME "display_cluster"
+
+/**
+ * struct lp8860_led -
+ * @lock - Lock for reading/writing the device
+ * @work - Work item used to off load the brightness register writes
+ * @client - Pointer to the I2C client
+ * @led_dev - led class device pointer
+ * @regmap - Devices register map
+ * @eeprom_regmap - EEPROM register map
+ * @enable_gpio - VDDIO/EN gpio to enable communication interface
+ * @regulator - LED supply regulator pointer
+ * @brightness - Current brightness value requested
+ * @label - LED label
+**/
+struct lp8860_led {
+ struct mutex lock;
+ struct work_struct work;
+ struct i2c_client *client;
+ struct led_classdev led_dev;
+ struct regmap *regmap;
+ struct regmap *eeprom_regmap;
+ struct gpio_desc *enable_gpio;
+ struct regulator *regulator;
+ enum led_brightness brightness;
+ const char *label;
+};
+
+struct lp8860_eeprom_reg {
+ uint8_t reg;
+ uint8_t value;
+};
+
+static struct lp8860_eeprom_reg lp8860_eeprom_disp_regs[] = {
+ { LP8860_EEPROM_REG_0, 0xed },
+ { LP8860_EEPROM_REG_1, 0xdf },
+ { LP8860_EEPROM_REG_2, 0xdc },
+ { LP8860_EEPROM_REG_3, 0xf0 },
+ { LP8860_EEPROM_REG_4, 0xdf },
+ { LP8860_EEPROM_REG_5, 0xe5 },
+ { LP8860_EEPROM_REG_6, 0xf2 },
+ { LP8860_EEPROM_REG_7, 0x77 },
+ { LP8860_EEPROM_REG_8, 0x77 },
+ { LP8860_EEPROM_REG_9, 0x71 },
+ { LP8860_EEPROM_REG_10, 0x3f },
+ { LP8860_EEPROM_REG_11, 0xb7 },
+ { LP8860_EEPROM_REG_12, 0x17 },
+ { LP8860_EEPROM_REG_13, 0xef },
+ { LP8860_EEPROM_REG_14, 0xb0 },
+ { LP8860_EEPROM_REG_15, 0x87 },
+ { LP8860_EEPROM_REG_16, 0xce },
+ { LP8860_EEPROM_REG_17, 0x72 },
+ { LP8860_EEPROM_REG_18, 0xe5 },
+ { LP8860_EEPROM_REG_19, 0xdf },
+ { LP8860_EEPROM_REG_20, 0x35 },
+ { LP8860_EEPROM_REG_21, 0x06 },
+ { LP8860_EEPROM_REG_22, 0xdc },
+ { LP8860_EEPROM_REG_23, 0x88 },
+ { LP8860_EEPROM_REG_24, 0x3E },
+};
+
+static int lp8860_unlock_eeprom(struct lp8860_led *led, int lock)
+{
+ int ret;
+
+ mutex_lock(&led->lock);
+
+ if (lock == LP8860_UNLOCK_EEPROM) {
+ ret = regmap_write(led->regmap,
+ LP8860_EEPROM_UNLOCK,
+ LP8860_EEPROM_CODE_1);
+ if (ret) {
+ dev_err(&led->client->dev, "EEPROM Unlock failed\n");
+ goto out;
+ }
+
+ ret = regmap_write(led->regmap,
+ LP8860_EEPROM_UNLOCK,
+ LP8860_EEPROM_CODE_2);
+ if (ret) {
+ dev_err(&led->client->dev, "EEPROM Unlock failed\n");
+ goto out;
+ }
+ ret = regmap_write(led->regmap,
+ LP8860_EEPROM_UNLOCK,
+ LP8860_EEPROM_CODE_3);
+ if (ret) {
+ dev_err(&led->client->dev, "EEPROM Unlock failed\n");
+ goto out;
+ }
+ } else {
+ ret = regmap_write(led->regmap,
+ LP8860_EEPROM_UNLOCK,
+ LP8860_LOCK_EEPROM);
+ }
+
+out:
+ mutex_unlock(&led->lock);
+ return ret;
+}
+
+static int lp8860_fault_check(struct lp8860_led *led)
+{
+ int ret, fault;
+ unsigned int read_buf;
+
+ ret = regmap_read(led->regmap, LP8860_LED_FAULT, &read_buf);
+ if (ret)
+ goto out;
+
+ fault = read_buf;
+
+ ret = regmap_read(led->regmap, LP8860_FAULT, &read_buf);
+ if (ret)
+ goto out;
+
+ fault |= read_buf;
+
+ /* Attempt to clear any faults */
+ if (fault)
+ ret = regmap_write(led->regmap, LP8860_FAULT_CLEAR,
+ LP8860_CLEAR_FAULTS);
+out:
+ return ret;
+}
+
+static void lp8860_led_brightness_work(struct work_struct *work)
+{
+ struct lp8860_led *led = container_of(work, struct lp8860_led, work);
+ int ret;
+ int disp_brightness = led->brightness * 255;
+
+ mutex_lock(&led->lock);
+
+ ret = lp8860_fault_check(led);
+ if (ret) {
+ dev_err(&led->client->dev, "Cannot read/clear faults\n");
+ goto out;
+ }
+
+ ret = regmap_write(led->regmap, LP8860_DISP_CL1_BRT_MSB,
+ (disp_brightness & 0xff00) >> 8);
+ if (ret) {
+ dev_err(&led->client->dev, "Cannot write CL1 MSB\n");
+ goto out;
+ }
+
+ ret = regmap_write(led->regmap, LP8860_DISP_CL1_BRT_LSB,
+ disp_brightness & 0xff);
+ if (ret) {
+ dev_err(&led->client->dev, "Cannot write CL1 LSB\n");
+ goto out;
+ }
+out:
+ mutex_unlock(&led->lock);
+}
+
+static void lp8860_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness brt_val)
+{
+ struct lp8860_led *led =
+ container_of(led_cdev, struct lp8860_led, led_dev);
+
+ led->brightness = brt_val;
+ schedule_work(&led->work);
+}
+
+static int lp8860_init(struct lp8860_led *led)
+{
+ unsigned int read_buf;
+ int ret, i, reg_count;
+
+ if (led->enable_gpio)
+ gpiod_direction_output(led->enable_gpio, 1);
+
+ ret = lp8860_fault_check(led);
+ if (ret)
+ goto out;
+
+ ret = regmap_read(led->regmap, LP8860_STATUS, &read_buf);
+ if (ret)
+ goto out;
+
+ ret = lp8860_unlock_eeprom(led, LP8860_UNLOCK_EEPROM);
+ if (ret) {
+ dev_err(&led->client->dev, "Failed unlocking EEPROM\n");
+ goto out;
+ }
+
+ reg_count = ARRAY_SIZE(lp8860_eeprom_disp_regs) / sizeof(lp8860_eeprom_disp_regs[0]);
+ for (i = 0; i < reg_count; i++) {
+ ret = regmap_write(led->eeprom_regmap,
+ lp8860_eeprom_disp_regs[i].reg,
+ lp8860_eeprom_disp_regs[i].value);
+ if (ret) {
+ dev_err(&led->client->dev, "Failed writing EEPROM\n");
+ goto out;
+ }
+ }
+
+ ret = lp8860_unlock_eeprom(led, LP8860_LOCK_EEPROM);
+ if (ret)
+ goto out;
+
+ ret = regmap_write(led->regmap,
+ LP8860_EEPROM_CNTRL,
+ LP8860_PROGRAM_EEPROM);
+ if (ret)
+ dev_err(&led->client->dev, "Failed programming EEPROM\n");
+out:
+ if (ret)
+ if (led->enable_gpio)
+ gpiod_direction_output(led->enable_gpio, 0);
+ return ret;
+}
+
+static struct reg_default lp8860_reg_defs[] = {
+ { LP8860_DISP_CL1_BRT_MSB, 0x00},
+ { LP8860_DISP_CL1_BRT_LSB, 0x00},
+ { LP8860_DISP_CL1_CURR_MSB, 0x00},
+ { LP8860_DISP_CL1_CURR_LSB, 0x00},
+ { LP8860_CL2_BRT_MSB, 0x00},
+ { LP8860_CL2_BRT_LSB, 0x00},
+ { LP8860_CL2_CURRENT, 0x00},
+ { LP8860_CL3_BRT_MSB, 0x00},
+ { LP8860_CL3_BRT_LSB, 0x00},
+ { LP8860_CL3_CURRENT, 0x00},
+ { LP8860_CL4_BRT_MSB, 0x00},
+ { LP8860_CL4_BRT_LSB, 0x00},
+ { LP8860_CL4_CURRENT, 0x00},
+ { LP8860_CONFIG, 0x00},
+ { LP8860_FAULT_CLEAR, 0x00},
+ { LP8860_EEPROM_CNTRL, 0x80},
+ { LP8860_EEPROM_UNLOCK, 0x00},
+};
+
+static const struct regmap_config lp8860_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = LP8860_EEPROM_UNLOCK,
+ .reg_defaults = lp8860_reg_defs,
+ .num_reg_defaults = ARRAY_SIZE(lp8860_reg_defs),
+ .cache_type = REGCACHE_NONE,
+};
+
+static struct reg_default lp8860_eeprom_defs[] = {
+ { LP8860_EEPROM_REG_0, 0x00 },
+ { LP8860_EEPROM_REG_1, 0x00 },
+ { LP8860_EEPROM_REG_2, 0x00 },
+ { LP8860_EEPROM_REG_3, 0x00 },
+ { LP8860_EEPROM_REG_4, 0x00 },
+ { LP8860_EEPROM_REG_5, 0x00 },
+ { LP8860_EEPROM_REG_6, 0x00 },
+ { LP8860_EEPROM_REG_7, 0x00 },
+ { LP8860_EEPROM_REG_8, 0x00 },
+ { LP8860_EEPROM_REG_9, 0x00 },
+ { LP8860_EEPROM_REG_10, 0x00 },
+ { LP8860_EEPROM_REG_11, 0x00 },
+ { LP8860_EEPROM_REG_12, 0x00 },
+ { LP8860_EEPROM_REG_13, 0x00 },
+ { LP8860_EEPROM_REG_14, 0x00 },
+ { LP8860_EEPROM_REG_15, 0x00 },
+ { LP8860_EEPROM_REG_16, 0x00 },
+ { LP8860_EEPROM_REG_17, 0x00 },
+ { LP8860_EEPROM_REG_18, 0x00 },
+ { LP8860_EEPROM_REG_19, 0x00 },
+ { LP8860_EEPROM_REG_20, 0x00 },
+ { LP8860_EEPROM_REG_21, 0x00 },
+ { LP8860_EEPROM_REG_22, 0x00 },
+ { LP8860_EEPROM_REG_23, 0x00 },
+ { LP8860_EEPROM_REG_24, 0x00 },
+};
+
+static const struct regmap_config lp8860_eeprom_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = LP8860_EEPROM_REG_24,
+ .reg_defaults = lp8860_eeprom_defs,
+ .num_reg_defaults = ARRAY_SIZE(lp8860_eeprom_defs),
+ .cache_type = REGCACHE_NONE,
+};
+
+static int lp8860_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct lp8860_led *led;
+ struct device_node *np = client->dev.of_node;
+
+ led = devm_kzalloc(&client->dev, sizeof(*led), GFP_KERNEL);
+ if (!led)
+ return -ENOMEM;
+
+ led->label = LP8860_DISP_LED_NAME;
+
+ if (client->dev.of_node) {
+ ret = of_property_read_string(np, "label", &led->label);
+ if (ret) {
+ dev_err(&client->dev, "Missing label in dt\n");
+ return -EINVAL;
+ }
+ }
+
+ led->enable_gpio = devm_gpiod_get(&client->dev, "enable");
+ if (IS_ERR(led->enable_gpio))
+ led->enable_gpio = NULL;
+ else
+ gpiod_direction_output(led->enable_gpio, 0);
+
+ led->regulator = devm_regulator_get(&client->dev, "vled");
+ if (IS_ERR(led->regulator))
+ led->regulator = NULL;
+
+ led->client = client;
+ led->led_dev.name = led->label;
+ led->led_dev.max_brightness = LED_FULL;
+ led->led_dev.brightness_set = lp8860_brightness_set;
+
+ mutex_init(&led->lock);
+ INIT_WORK(&led->work, lp8860_led_brightness_work);
+
+ i2c_set_clientdata(client, led);
+
+ led->regmap = devm_regmap_init_i2c(client, &lp8860_regmap_config);
+ if (IS_ERR(led->regmap)) {
+ ret = PTR_ERR(led->regmap);
+ dev_err(&client->dev, "Failed to allocate register map: %d\n",
+ ret);
+ return ret;
+ }
+
+ led->eeprom_regmap = devm_regmap_init_i2c(client, &lp8860_eeprom_regmap_config);
+ if (IS_ERR(led->eeprom_regmap)) {
+ ret = PTR_ERR(led->eeprom_regmap);
+ dev_err(&client->dev, "Failed to allocate register map: %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = lp8860_init(led);
+ if (ret)
+ return ret;
+
+ ret = led_classdev_register(&client->dev, &led->led_dev);
+ if (ret) {
+ dev_err(&client->dev, "led register err: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int lp8860_remove(struct i2c_client *client)
+{
+ struct lp8860_led *led = i2c_get_clientdata(client);
+ int ret;
+
+ led_classdev_unregister(&led->led_dev);
+ cancel_work_sync(&led->work);
+
+ if (led->enable_gpio)
+ gpiod_direction_output(led->enable_gpio, 0);
+
+ if (led->regulator) {
+ ret = regulator_disable(led->regulator);
+ if (ret)
+ dev_err(&led->client->dev,
+ "Failed to disable regulator\n");
+ }
+
+ return 0;
+}
+
+static const struct i2c_device_id lp8860_id[] = {
+ { "lp8860", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, lp8860_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id of_lp8860_leds_match[] = {
+ { .compatible = "ti,lp8860", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, of_lp8860_leds_match);
+#endif
+
+static struct i2c_driver lp8860_driver = {
+ .driver = {
+ .name = "lp8860",
+ .of_match_table = of_match_ptr(of_lp8860_leds_match),
+ },
+ .probe = lp8860_probe,
+ .remove = lp8860_remove,
+ .id_table = lp8860_id,
+};
+module_i2c_driver(lp8860_driver);
+
+MODULE_DESCRIPTION("Texas Instruments LP8860 LED drvier");
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
+MODULE_LICENSE("GPL");