summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/pinctrl.txt96
-rw-r--r--drivers/pinctrl/Kconfig5
-rw-r--r--drivers/pinctrl/Makefile1
-rw-r--r--drivers/pinctrl/core.c43
-rw-r--r--drivers/pinctrl/core.h5
-rw-r--r--drivers/pinctrl/pinconf.c302
-rw-r--r--drivers/pinctrl/pinconf.h36
-rw-r--r--include/linux/pinctrl/pinconf.h96
-rw-r--r--include/linux/pinctrl/pinctrl.h8
9 files changed, 582 insertions, 10 deletions
diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt
index c8fd136eac83..6d23fa84ee47 100644
--- a/Documentation/pinctrl.txt
+++ b/Documentation/pinctrl.txt
@@ -7,12 +7,9 @@ This subsystem deals with:
- Multiplexing of pins, pads, fingers (etc) see below for details
-The intention is to also deal with:
-
-- Software-controlled biasing and driving mode specific pins, such as
- pull-up/down, open drain etc, load capacitance configuration when controlled
- by software, etc.
-
+- Configuration of pins, pads, fingers (etc), such as software-controlled
+ biasing and driving mode specific pins, such as pull-up/down, open drain,
+ load capacitance etc.
Top-level interface
===================
@@ -88,6 +85,11 @@ int __init foo_probe(void)
pr_err("could not register foo pin driver\n");
}
+To enable the pinctrl subsystem and the subgroups for PINMUX and PINCONF and
+selected drivers, you need to select them from your machine's Kconfig entry,
+since these are so tightly integrated with the machines they are used on.
+See for example arch/arm/mach-u300/Kconfig for an example.
+
Pins usually have fancier names than this. You can find these in the dataheet
for your chip. Notice that the core pinctrl.h file provides a fancy macro
called PINCTRL_PIN() to create the struct entries. As you can see I enumerated
@@ -193,6 +195,88 @@ structure, for example specific register ranges associated with each group
and so on.
+Pin configuration
+=================
+
+Pins can sometimes be software-configured in an various ways, mostly related
+to their electronic properties when used as inputs or outputs. For example you
+may be able to make an output pin high impedance, or "tristate" meaning it is
+effectively disconnected. You may be able to connect an input pin to VDD or GND
+using a certain resistor value - pull up and pull down - so that the pin has a
+stable value when nothing is driving the rail it is connected to, or when it's
+unconnected.
+
+For example, a platform may do this:
+
+ret = pin_config_set(dev, "FOO_GPIO_PIN", PLATFORM_X_PULL_UP);
+
+To pull up a pin to VDD. The pin configuration driver implements callbacks for
+changing pin configuration in the pin controller ops like this:
+
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinconf.h>
+#include "platform_x_pindefs.h"
+
+int foo_pin_config_get(struct pinctrl_dev *pctldev,
+ unsigned offset,
+ unsigned long *config)
+{
+ struct my_conftype conf;
+
+ ... Find setting for pin @ offset ...
+
+ *config = (unsigned long) conf;
+}
+
+int foo_pin_config_set(struct pinctrl_dev *pctldev,
+ unsigned offset,
+ unsigned long config)
+{
+ struct my_conftype *conf = (struct my_conftype *) config;
+
+ switch (conf) {
+ case PLATFORM_X_PULL_UP:
+ ...
+ }
+ }
+}
+
+int foo_pin_config_group_get (struct pinctrl_dev *pctldev,
+ unsigned selector,
+ unsigned long *config)
+{
+ ...
+}
+
+int foo_pin_config_group_set (struct pinctrl_dev *pctldev,
+ unsigned selector,
+ unsigned long config)
+{
+ ...
+}
+
+static struct pinconf_ops foo_pconf_ops = {
+ .pin_config_get = foo_pin_config_get,
+ .pin_config_set = foo_pin_config_set,
+ .pin_config_group_get = foo_pin_config_group_get,
+ .pin_config_group_set = foo_pin_config_group_set,
+};
+
+/* Pin config operations are handled by some pin controller */
+static struct pinctrl_desc foo_desc = {
+ ...
+ .confops = &foo_pconf_ops,
+};
+
+Since some controllers have special logic for handling entire groups of pins
+they can exploit the special whole-group pin control function. The
+pin_config_group_set() callback is allowed to return the error code -EAGAIN,
+for groups it does not want to handle, or if it just wants to do some
+group-level handling and then fall through to iterate over all pins, in which
+case each individual pin will be treated by separate pin_config_set() calls as
+well.
+
+
Interaction with the GPIO subsystem
===================================
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index e963da41e948..c63c72102989 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -12,7 +12,10 @@ menu "Pin controllers"
depends on PINCTRL
config PINMUX
- bool "Support pinmux controllers"
+ bool "Support pin multiplexing controllers"
+
+config PINCONF
+ bool "Support pin configuration controllers"
config DEBUG_PINCTRL
bool "Debug PINCTRL calls"
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 5f3e4d65465a..c046f78dd7f7 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -4,6 +4,7 @@ ccflags-$(CONFIG_DEBUG_PINCTRL) += -DDEBUG
obj-$(CONFIG_PINCTRL) += core.o
obj-$(CONFIG_PINMUX) += pinmux.o
+obj-$(CONFIG_PINCONF) += pinconf.o
obj-$(CONFIG_PINMUX_SIRF) += pinmux-sirf.o
obj-$(CONFIG_PINMUX_U300) += pinmux-u300.o
obj-$(CONFIG_PINCTRL_COH901) += pinctrl-coh901.o
diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index 4955a68d618f..034b1ad38b32 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -28,6 +28,7 @@
#include <linux/pinctrl/machine.h>
#include "core.h"
#include "pinmux.h"
+#include "pinconf.h"
/* Global list of pin control devices */
static DEFINE_MUTEX(pinctrldev_list_mutex);
@@ -101,6 +102,30 @@ struct pin_desc *pin_desc_get(struct pinctrl_dev *pctldev, unsigned int pin)
}
/**
+ * pin_get_from_name() - look up a pin number from a name
+ * @pctldev: the pin control device to lookup the pin on
+ * @name: the name of the pin to look up
+ */
+int pin_get_from_name(struct pinctrl_dev *pctldev, const char *name)
+{
+ unsigned pin;
+
+ /* The highest pin number need to be included in the loop, thus <= */
+ for (pin = 0; pin <= pctldev->desc->maxpin; pin++) {
+ struct pin_desc *desc;
+
+ desc = pin_desc_get(pctldev, pin);
+ /* Pin space may be sparse */
+ if (desc == NULL)
+ continue;
+ if (desc->name && !strcmp(name, desc->name))
+ return pin;
+ }
+
+ return -EINVAL;
+}
+
+/**
* pin_is_valid() - check if pin exists on controller
* @pctldev: the pin control device to check the pin on
* @pin: pin to check, use the local pin controller index number
@@ -160,6 +185,7 @@ static int pinctrl_register_one_pin(struct pinctrl_dev *pctldev,
pindesc = kzalloc(sizeof(*pindesc), GFP_KERNEL);
if (pindesc == NULL)
return -ENOMEM;
+
spin_lock_init(&pindesc->lock);
/* Set owner */
@@ -409,11 +435,15 @@ static int pinctrl_devices_show(struct seq_file *s, void *what)
{
struct pinctrl_dev *pctldev;
- seq_puts(s, "name [pinmux]\n");
+ seq_puts(s, "name [pinmux] [pinconf]\n");
mutex_lock(&pinctrldev_list_mutex);
list_for_each_entry(pctldev, &pinctrldev_list, node) {
seq_printf(s, "%s ", pctldev->desc->name);
if (pctldev->desc->pmxops)
+ seq_puts(s, "yes ");
+ else
+ seq_puts(s, "no ");
+ if (pctldev->desc->confops)
seq_puts(s, "yes");
else
seq_puts(s, "no");
@@ -492,6 +522,7 @@ static void pinctrl_init_device_debugfs(struct pinctrl_dev *pctldev)
debugfs_create_file("gpio-ranges", S_IFREG | S_IRUGO,
device_root, pctldev, &pinctrl_gpioranges_ops);
pinmux_init_device_debugfs(device_root, pctldev);
+ pinconf_init_device_debugfs(device_root, pctldev);
}
static void pinctrl_init_debugfs(void)
@@ -548,6 +579,16 @@ struct pinctrl_dev *pinctrl_register(struct pinctrl_desc *pctldesc,
}
}
+ /* If we're implementing pinconfig, check the ops for sanity */
+ if (pctldesc->confops) {
+ ret = pinconf_check_ops(pctldesc->confops);
+ if (ret) {
+ pr_err("%s pin config ops lacks necessary functions\n",
+ pctldesc->name);
+ return NULL;
+ }
+ }
+
pctldev = kzalloc(sizeof(struct pinctrl_dev), GFP_KERNEL);
if (pctldev == NULL)
return NULL;
diff --git a/drivers/pinctrl/core.h b/drivers/pinctrl/core.h
index 74dee439dcf0..3f5b911acf18 100644
--- a/drivers/pinctrl/core.h
+++ b/drivers/pinctrl/core.h
@@ -9,6 +9,10 @@
* License terms: GNU General Public License (GPL) version 2
*/
+#include <linux/pinctrl/pinconf.h>
+
+struct pinctrl_gpio_range;
+
/**
* struct pinctrl_dev - pin control class device
* @node: node to include this pin controller in the global pin controller list
@@ -66,6 +70,7 @@ struct pin_desc {
struct pinctrl_dev *get_pinctrl_dev_from_dev(struct device *dev,
const char *dev_name);
struct pin_desc *pin_desc_get(struct pinctrl_dev *pctldev, unsigned int pin);
+int pin_get_from_name(struct pinctrl_dev *pctldev, const char *name);
int pinctrl_get_device_gpio_range(unsigned gpio,
struct pinctrl_dev **outdev,
struct pinctrl_gpio_range **outrange);
diff --git a/drivers/pinctrl/pinconf.c b/drivers/pinctrl/pinconf.c
new file mode 100644
index 000000000000..9195eefe258a
--- /dev/null
+++ b/drivers/pinctrl/pinconf.c
@@ -0,0 +1,302 @@
+/*
+ * Core driver for the pin config portions of the pin control subsystem
+ *
+ * Copyright (C) 2011 ST-Ericsson SA
+ * Written on behalf of Linaro for ST-Ericsson
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#define pr_fmt(fmt) "pinconfig core: " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinconf.h>
+#include "core.h"
+#include "pinconf.h"
+
+int pin_config_get_for_pin(struct pinctrl_dev *pctldev, unsigned pin,
+ unsigned long *config)
+{
+ const struct pinconf_ops *ops = pctldev->desc->confops;
+
+ if (!ops || !ops->pin_config_get) {
+ dev_err(&pctldev->dev, "cannot get pin configuration, missing "
+ "pin_config_get() function in driver\n");
+ return -EINVAL;
+ }
+
+ return ops->pin_config_get(pctldev, pin, config);
+}
+
+/**
+ * pin_config_get() - get the configuration of a single pin parameter
+ * @pctldev: pin controller device for this pin
+ * @name: name of the pin to get the config for
+ * @config: the config pointed to by this argument will be filled in with the
+ * current pin state, it can be used directly by drivers as a numeral, or
+ * it can be dereferenced to any struct.
+ */
+int pin_config_get(struct pinctrl_dev *pctldev, const char *name,
+ unsigned long *config)
+{
+ int pin;
+
+ pin = pin_get_from_name(pctldev, name);
+ if (pin < 0)
+ return pin;
+
+ return pin_config_get_for_pin(pctldev, pin, config);
+}
+EXPORT_SYMBOL(pin_config_get);
+
+int pin_config_set_for_pin(struct pinctrl_dev *pctldev, unsigned pin,
+ unsigned long config)
+{
+ const struct pinconf_ops *ops = pctldev->desc->confops;
+ int ret;
+
+ if (!ops || !ops->pin_config_set) {
+ dev_err(&pctldev->dev, "cannot configure pin, missing "
+ "config function in driver\n");
+ return -EINVAL;
+ }
+
+ ret = ops->pin_config_set(pctldev, pin, config);
+ if (ret) {
+ dev_err(&pctldev->dev,
+ "unable to set pin configuration on pin %d\n", pin);
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * pin_config_set() - set the configuration of a single pin parameter
+ * @pctldev: pin controller device for this pin
+ * @name: name of the pin to set the config for
+ * @config: the config in this argument will contain the desired pin state, it
+ * can be used directly by drivers as a numeral, or it can be dereferenced
+ * to any struct.
+ */
+int pin_config_set(struct pinctrl_dev *pctldev, const char *name,
+ unsigned long config)
+{
+ int pin;
+
+ pin = pin_get_from_name(pctldev, name);
+ if (pin < 0)
+ return pin;
+
+ return pin_config_set_for_pin(pctldev, pin, config);
+}
+EXPORT_SYMBOL(pin_config_set);
+
+int pin_config_group_get(struct pinctrl_dev *pctldev, const char *pin_group,
+ unsigned long *config)
+{
+ const struct pinconf_ops *ops = pctldev->desc->confops;
+ int selector;
+
+ if (!ops || !ops->pin_config_group_get) {
+ dev_err(&pctldev->dev, "cannot get configuration for pin "
+ "group, missing group config get function in "
+ "driver\n");
+ return -EINVAL;
+ }
+
+ selector = pinctrl_get_group_selector(pctldev, pin_group);
+ if (selector < 0)
+ return selector;
+
+ return ops->pin_config_group_get(pctldev, selector, config);
+}
+EXPORT_SYMBOL(pin_config_group_get);
+
+
+int pin_config_group_set(struct pinctrl_dev *pctldev, const char *pin_group,
+ unsigned long config)
+{
+ const struct pinctrl_ops *pctlops = pctldev->desc->pctlops;
+ const struct pinconf_ops *ops = pctldev->desc->confops;
+ int selector;
+ const unsigned *pins;
+ unsigned num_pins;
+ int ret;
+ int i;
+
+ if (!ops || (!ops->pin_config_group_set && !ops->pin_config_set)) {
+ dev_err(&pctldev->dev, "cannot configure pin group, missing "
+ "config function in driver\n");
+ return -EINVAL;
+ }
+
+ selector = pinctrl_get_group_selector(pctldev, pin_group);
+ if (selector < 0)
+ return selector;
+
+ ret = pctlops->get_group_pins(pctldev, selector, &pins, &num_pins);
+ if (ret) {
+ dev_err(&pctldev->dev, "cannot configure pin group, error "
+ "getting pins\n");
+ return ret;
+ }
+
+ /*
+ * If the pin controller supports handling entire groups we use that
+ * capability.
+ */
+ if (ops->pin_config_group_set) {
+ ret = ops->pin_config_group_set(pctldev, selector, config);
+ /*
+ * If the pin controller prefer that a certain group be handled
+ * pin-by-pin as well, it returns -EAGAIN.
+ */
+ if (ret != -EAGAIN)
+ return ret;
+ }
+
+ /*
+ * If the controller cannot handle entire groups, we configure each pin
+ * individually.
+ */
+ if (!ops->pin_config_set)
+ return 0;
+
+ for (i = 0; i < num_pins; i++) {
+ ret = ops->pin_config_set(pctldev, pins[i], config);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(pin_config_group_set);
+
+int pinconf_check_ops(const struct pinconf_ops *ops)
+{
+ /* We must be able to read out pin status */
+ if (!ops->pin_config_get && !ops->pin_config_group_get)
+ return -EINVAL;
+ /* We have to be able to config the pins in SOME way */
+ if (!ops->pin_config_set && !ops->pin_config_group_set)
+ return -EINVAL;
+ return 0;
+}
+
+#ifdef CONFIG_DEBUG_FS
+
+static void pinconf_dump_pin(struct pinctrl_dev *pctldev,
+ struct seq_file *s, int pin)
+{
+ const struct pinconf_ops *ops = pctldev->desc->confops;
+
+ if (ops && ops->pin_config_dbg_show)
+ ops->pin_config_dbg_show(pctldev, s, pin);
+}
+
+static int pinconf_pins_show(struct seq_file *s, void *what)
+{
+ struct pinctrl_dev *pctldev = s->private;
+ unsigned pin;
+
+ seq_puts(s, "Pin config settings per pin\n");
+ seq_puts(s, "Format: pin (name): pinmux setting array\n");
+
+ /* The highest pin number need to be included in the loop, thus <= */
+ for (pin = 0; pin <= pctldev->desc->maxpin; pin++) {
+ struct pin_desc *desc;
+
+ desc = pin_desc_get(pctldev, pin);
+ /* Pin space may be sparse */
+ if (desc == NULL)
+ continue;
+
+ seq_printf(s, "pin %d (%s):", pin,
+ desc->name ? desc->name : "unnamed");
+
+ pinconf_dump_pin(pctldev, s, pin);
+
+ seq_printf(s, "\n");
+ }
+
+ return 0;
+}
+
+static void pinconf_dump_group(struct pinctrl_dev *pctldev,
+ struct seq_file *s, unsigned selector,
+ const char *gname)
+{
+ const struct pinconf_ops *ops = pctldev->desc->confops;
+
+ if (ops && ops->pin_config_group_dbg_show)
+ ops->pin_config_group_dbg_show(pctldev, s, selector);
+}
+
+static int pinconf_groups_show(struct seq_file *s, void *what)
+{
+ struct pinctrl_dev *pctldev = s->private;
+ const struct pinctrl_ops *pctlops = pctldev->desc->pctlops;
+ const struct pinconf_ops *ops = pctldev->desc->confops;
+ unsigned selector = 0;
+
+ if (!ops || !ops->pin_config_group_get)
+ return 0;
+
+ seq_puts(s, "Pin config settings per pin group\n");
+ seq_puts(s, "Format: group (name): pinmux setting array\n");
+
+ while (pctlops->list_groups(pctldev, selector) >= 0) {
+ const char *gname = pctlops->get_group_name(pctldev, selector);
+
+ seq_printf(s, "%u (%s):", selector, gname);
+ pinconf_dump_group(pctldev, s, selector, gname);
+ selector++;
+ }
+
+ return 0;
+}
+
+static int pinconf_pins_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, pinconf_pins_show, inode->i_private);
+}
+
+static int pinconf_groups_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, pinconf_groups_show, inode->i_private);
+}
+
+static const struct file_operations pinconf_pins_ops = {
+ .open = pinconf_pins_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static const struct file_operations pinconf_groups_ops = {
+ .open = pinconf_groups_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+void pinconf_init_device_debugfs(struct dentry *devroot,
+ struct pinctrl_dev *pctldev)
+{
+ debugfs_create_file("pinconf-pins", S_IFREG | S_IRUGO,
+ devroot, pctldev, &pinconf_pins_ops);
+ debugfs_create_file("pinconf-groups", S_IFREG | S_IRUGO,
+ devroot, pctldev, &pinconf_groups_ops);
+}
+
+#endif
diff --git a/drivers/pinctrl/pinconf.h b/drivers/pinctrl/pinconf.h
new file mode 100644
index 000000000000..e7dc6165032a
--- /dev/null
+++ b/drivers/pinctrl/pinconf.h
@@ -0,0 +1,36 @@
+/*
+ * Internal interface between the core pin control system and the
+ * pin config portions
+ *
+ * Copyright (C) 2011 ST-Ericsson SA
+ * Written on behalf of Linaro for ST-Ericsson
+ * Based on bits of regulator core, gpio core and clk core
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifdef CONFIG_PINCONF
+
+int pinconf_check_ops(const struct pinconf_ops *ops);
+void pinconf_init_device_debugfs(struct dentry *devroot,
+ struct pinctrl_dev *pctldev);
+int pin_config_get_for_pin(struct pinctrl_dev *pctldev, unsigned pin,
+ unsigned long *config);
+int pin_config_set_for_pin(struct pinctrl_dev *pctldev, unsigned pin,
+ unsigned long config);
+
+#else
+
+static inline int pinconf_check_ops(const struct pinconf_ops *ops)
+{
+ return 0;
+}
+
+static inline void pinconf_init_device_debugfs(struct dentry *devroot,
+ struct pinctrl_dev *pctldev)
+{
+}
+
+#endif
diff --git a/include/linux/pinctrl/pinconf.h b/include/linux/pinctrl/pinconf.h
new file mode 100644
index 000000000000..d5b72e6e261d
--- /dev/null
+++ b/include/linux/pinctrl/pinconf.h
@@ -0,0 +1,96 @@
+/*
+ * Interface the pinconfig portions of the pinctrl subsystem
+ *
+ * Copyright (C) 2011 ST-Ericsson SA
+ * Written on behalf of Linaro for ST-Ericsson
+ * This interface is used in the core to keep track of pins.
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef __LINUX_PINCTRL_PINCONF_H
+#define __LINUX_PINCTRL_PINCONF_H
+
+#ifdef CONFIG_PINCONF
+
+struct pinctrl_dev;
+
+/**
+ * struct pinconf_ops - pin config operations, to be implemented by
+ * pin configuration capable drivers.
+ * @pin_config_get: get the config of a certain pin, if the requested config
+ * is not available on this controller this should return -ENOTSUPP
+ * and if it is available but disabled it should return -EINVAL
+ * @pin_config_get: get the config of a certain pin
+ * @pin_config_set: configure an individual pin
+ * @pin_config_group_get: get configurations for an entire pin group
+ * @pin_config_group_set: configure all pins in a group
+ * @pin_config_dbg_show: optional debugfs display hook that will provide
+ * per-device info for a certain pin in debugfs
+ * @pin_config_group_dbg_show: optional debugfs display hook that will provide
+ * per-device info for a certain group in debugfs
+ */
+struct pinconf_ops {
+ int (*pin_config_get) (struct pinctrl_dev *pctldev,
+ unsigned pin,
+ unsigned long *config);
+ int (*pin_config_set) (struct pinctrl_dev *pctldev,
+ unsigned pin,
+ unsigned long config);
+ int (*pin_config_group_get) (struct pinctrl_dev *pctldev,
+ unsigned selector,
+ unsigned long *config);
+ int (*pin_config_group_set) (struct pinctrl_dev *pctldev,
+ unsigned selector,
+ unsigned long config);
+ void (*pin_config_dbg_show) (struct pinctrl_dev *pctldev,
+ struct seq_file *s,
+ unsigned offset);
+ void (*pin_config_group_dbg_show) (struct pinctrl_dev *pctldev,
+ struct seq_file *s,
+ unsigned selector);
+};
+
+extern int pin_config_get(struct pinctrl_dev *pctldev, const char *name,
+ unsigned long *config);
+extern int pin_config_set(struct pinctrl_dev *pctldev, const char *name,
+ unsigned long config);
+extern int pin_config_group_get(struct pinctrl_dev *pctldev,
+ const char *pin_group,
+ unsigned long *config);
+extern int pin_config_group_set(struct pinctrl_dev *pctldev,
+ const char *pin_group,
+ unsigned long config);
+
+#else
+
+static inline int pin_config_get(struct pinctrl_dev *pctldev, const char *name,
+ unsigned long *config)
+{
+ return 0;
+}
+
+static inline int pin_config_set(struct pinctrl_dev *pctldev, const char *name,
+ unsigned long config)
+{
+ return 0;
+}
+
+static inline int pin_config_group_get(struct pinctrl_dev *pctldev,
+ const char *pin_group,
+ unsigned long *config)
+{
+ return 0;
+}
+
+static inline int pin_config_group_set(struct pinctrl_dev *pctldev,
+ const char *pin_group,
+ unsigned long config)
+{
+ return 0;
+}
+
+#endif
+
+#endif /* __LINUX_PINCTRL_PINCONF_H */
diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h
index f17fac4b51f1..9809a94f151b 100644
--- a/include/linux/pinctrl/pinctrl.h
+++ b/include/linux/pinctrl/pinctrl.h
@@ -21,6 +21,7 @@
struct pinctrl_dev;
struct pinmux_ops;
+struct pinconf_ops;
struct gpio_chip;
/**
@@ -97,7 +98,9 @@ struct pinctrl_ops {
* but may be equal to npins if you have no holes in the pin range.
* @pctlops: pin control operation vtable, to support global concepts like
* grouping of pins, this is optional.
- * @pmxops: pinmux operation vtable, if you support pinmuxing in your driver
+ * @pmxops: pinmux operations vtable, if you support pinmuxing in your driver
+ * @confops: pin config operations vtable, if you support pin configuration in
+ * your driver
* @owner: module providing the pin controller, used for refcounting
*/
struct pinctrl_desc {
@@ -107,6 +110,7 @@ struct pinctrl_desc {
unsigned int maxpin;
struct pinctrl_ops *pctlops;
struct pinmux_ops *pmxops;
+ struct pinconf_ops *confops;
struct module *owner;
};
@@ -125,7 +129,7 @@ extern void *pinctrl_dev_get_drvdata(struct pinctrl_dev *pctldev);
struct pinctrl_dev;
-/* Sufficiently stupid default function when pinctrl is not in use */
+/* Sufficiently stupid default functions when pinctrl is not in use */
static inline bool pin_is_valid(struct pinctrl_dev *pctldev, int pin)
{
return pin >= 0;