summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/video/ssd1307fb.txt21
-rw-r--r--drivers/video/fbdev/ssd1307fb.c177
2 files changed, 125 insertions, 73 deletions
diff --git a/Documentation/devicetree/bindings/video/ssd1307fb.txt b/Documentation/devicetree/bindings/video/ssd1307fb.txt
index 7a125427ff4b..635efa3b2b27 100644
--- a/Documentation/devicetree/bindings/video/ssd1307fb.txt
+++ b/Documentation/devicetree/bindings/video/ssd1307fb.txt
@@ -15,6 +15,16 @@ Required properties:
Optional properties:
- reset-active-low: Is the reset gpio is active on physical low?
+ - solomon,segment-no-remap: Display needs normal (non-inverted) data column
+ to segment mapping
+ - solomon,com-seq: Display uses sequential COM pin configuration
+ - solomon,com-lrremap: Display uses left-right COM pin remap
+ - solomon,com-invdir: Display uses inverted COM pin scan direction
+ - solomon,com-offset: Number of the COM pin wired to the first display line
+ - solomon,prechargep1: Length of deselect period (phase 1) in clock cycles.
+ - solomon,prechargep2: Length of precharge period (phase 2) in clock cycles.
+ This needs to be the higher, the higher the capacitance
+ of the OLED's pixels is
[0]: Documentation/devicetree/bindings/pwm/pwm.txt
@@ -26,3 +36,14 @@ ssd1307: oled@3c {
reset-gpios = <&gpio2 7>;
reset-active-low;
};
+
+ssd1306: oled@3c {
+ compatible = "solomon,ssd1306fb-i2c";
+ reg = <0x3c>;
+ pwms = <&pwm 4 3000>;
+ reset-gpios = <&gpio2 7>;
+ reset-active-low;
+ solomon,com-lrremap;
+ solomon,com-invdir;
+ solomon,com-offset = <32>;
+};
diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
index 8d34c5651187..8667c7769d8a 100644
--- a/drivers/video/fbdev/ssd1307fb.c
+++ b/drivers/video/fbdev/ssd1307fb.c
@@ -40,20 +40,34 @@
struct ssd1307fb_par;
-struct ssd1307fb_ops {
- int (*init)(struct ssd1307fb_par *);
- int (*remove)(struct ssd1307fb_par *);
+struct ssd1307fb_deviceinfo {
+ u32 default_vcomh;
+ u32 default_dclk_div;
+ u32 default_dclk_frq;
+ int need_pwm;
+ int need_chargepump;
};
struct ssd1307fb_par {
+ u32 com_invdir;
+ u32 com_lrremap;
+ u32 com_offset;
+ u32 com_seq;
+ u32 contrast;
+ u32 dclk_div;
+ u32 dclk_frq;
+ struct ssd1307fb_deviceinfo *device_info;
struct i2c_client *client;
u32 height;
struct fb_info *info;
- struct ssd1307fb_ops *ops;
u32 page_offset;
+ u32 prechargep1;
+ u32 prechargep2;
struct pwm_device *pwm;
u32 pwm_period;
int reset;
+ u32 seg_remap;
+ u32 vcomh;
u32 width;
};
@@ -254,69 +268,46 @@ static struct fb_deferred_io ssd1307fb_defio = {
.deferred_io = ssd1307fb_deferred_io,
};
-static int ssd1307fb_ssd1307_init(struct ssd1307fb_par *par)
+static int ssd1307fb_init(struct ssd1307fb_par *par)
{
int ret;
+ u32 precharge, dclk, com_invdir, compins;
- par->pwm = pwm_get(&par->client->dev, NULL);
- if (IS_ERR(par->pwm)) {
- dev_err(&par->client->dev, "Could not get PWM from device tree!\n");
- return PTR_ERR(par->pwm);
- }
-
- par->pwm_period = pwm_get_period(par->pwm);
- /* Enable the PWM */
- pwm_config(par->pwm, par->pwm_period / 2, par->pwm_period);
- pwm_enable(par->pwm);
-
- dev_dbg(&par->client->dev, "Using PWM%d with a %dns period.\n",
- par->pwm->pwm, par->pwm_period);
-
- /* Map column 127 of the OLED to segment 0 */
- ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SEG_REMAP_ON);
- if (ret < 0)
- return ret;
-
- /* Turn on the display */
- ret = ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_ON);
- if (ret < 0)
- return ret;
-
- return 0;
-}
+ if (par->device_info->need_pwm) {
+ par->pwm = pwm_get(&par->client->dev, NULL);
+ if (IS_ERR(par->pwm)) {
+ dev_err(&par->client->dev, "Could not get PWM from device tree!\n");
+ return PTR_ERR(par->pwm);
+ }
-static int ssd1307fb_ssd1307_remove(struct ssd1307fb_par *par)
-{
- pwm_disable(par->pwm);
- pwm_put(par->pwm);
- return 0;
-}
+ par->pwm_period = pwm_get_period(par->pwm);
+ /* Enable the PWM */
+ pwm_config(par->pwm, par->pwm_period / 2, par->pwm_period);
+ pwm_enable(par->pwm);
-static struct ssd1307fb_ops ssd1307fb_ssd1307_ops = {
- .init = ssd1307fb_ssd1307_init,
- .remove = ssd1307fb_ssd1307_remove,
-};
-
-static int ssd1307fb_ssd1306_init(struct ssd1307fb_par *par)
-{
- int ret;
+ dev_dbg(&par->client->dev, "Using PWM%d with a %dns period.\n",
+ par->pwm->pwm, par->pwm_period);
+ };
/* Set initial contrast */
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CONTRAST);
if (ret < 0)
return ret;
- ret = ssd1307fb_write_cmd(par->client, 0x7f);
- if (ret < 0)
- return ret;
-
- /* Set COM direction */
- ret = ssd1307fb_write_cmd(par->client, 0xc8);
+ ret = ssd1307fb_write_cmd(par->client, par->contrast);
if (ret < 0)
return ret;
/* Set segment re-map */
- ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SEG_REMAP_ON);
+ if (par->seg_remap) {
+ ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SEG_REMAP_ON);
+ if (ret < 0)
+ return ret;
+ };
+
+ /* Set COM direction */
+ com_invdir = 0xc0 | (par->com_invdir & 0x1) << 3;
+ ret = ssd1307fb_write_cmd(par->client, com_invdir);
if (ret < 0)
return ret;
@@ -334,7 +325,7 @@ static int ssd1307fb_ssd1306_init(struct ssd1307fb_par *par)
if (ret < 0)
return ret;
- ret = ssd1307fb_write_cmd(par->client, 0x20);
+ ret = ssd1307fb_write_cmd(par->client, par->com_offset);
if (ret < 0)
return ret;
@@ -343,7 +334,8 @@ static int ssd1307fb_ssd1306_init(struct ssd1307fb_par *par)
if (ret < 0)
return ret;
- ret = ssd1307fb_write_cmd(par->client, 0xf0);
+ dclk = ((par->dclk_div - 1) & 0xf) | (par->dclk_frq & 0xf) << 4;
+ ret = ssd1307fb_write_cmd(par->client, dclk);
if (ret < 0)
return ret;
@@ -352,7 +344,8 @@ static int ssd1307fb_ssd1306_init(struct ssd1307fb_par *par)
if (ret < 0)
return ret;
- ret = ssd1307fb_write_cmd(par->client, 0x22);
+ precharge = (par->prechargep1 & 0xf) | (par->prechargep2 & 0xf) << 4;
+ ret = ssd1307fb_write_cmd(par->client, precharge);
if (ret < 0)
return ret;
@@ -361,7 +354,9 @@ static int ssd1307fb_ssd1306_init(struct ssd1307fb_par *par)
if (ret < 0)
return ret;
- ret = ssd1307fb_write_cmd(par->client, 0x22);
+ compins = 0x02 | (!par->com_seq & 0x1) << 4
+ | (par->com_lrremap & 0x1) << 5;
+ ret = ssd1307fb_write_cmd(par->client, compins);
if (ret < 0)
return ret;
@@ -370,7 +365,7 @@ static int ssd1307fb_ssd1306_init(struct ssd1307fb_par *par)
if (ret < 0)
return ret;
- ret = ssd1307fb_write_cmd(par->client, 0x49);
+ ret = ssd1307fb_write_cmd(par->client, par->vcomh);
if (ret < 0)
return ret;
@@ -379,7 +374,8 @@ static int ssd1307fb_ssd1306_init(struct ssd1307fb_par *par)
if (ret < 0)
return ret;
- ret = ssd1307fb_write_cmd(par->client, 0x14);
+ ret = ssd1307fb_write_cmd(par->client,
+ (par->device_info->need_chargepump & 0x1 << 2) & 0x14);
if (ret < 0)
return ret;
@@ -393,6 +389,7 @@ static int ssd1307fb_ssd1306_init(struct ssd1307fb_par *par)
if (ret < 0)
return ret;
+ /* Set column range */
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COL_RANGE);
if (ret < 0)
return ret;
@@ -405,6 +402,7 @@ static int ssd1307fb_ssd1306_init(struct ssd1307fb_par *par)
if (ret < 0)
return ret;
+ /* Set page range */
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PAGE_RANGE);
if (ret < 0)
return ret;
@@ -426,18 +424,28 @@ static int ssd1307fb_ssd1306_init(struct ssd1307fb_par *par)
return 0;
}
-static struct ssd1307fb_ops ssd1307fb_ssd1306_ops = {
- .init = ssd1307fb_ssd1306_init,
+static struct ssd1307fb_deviceinfo ssd1307fb_ssd1306_deviceinfo = {
+ .default_vcomh = 0x20,
+ .default_dclk_div = 1,
+ .default_dclk_frq = 8,
+ .need_chargepump = 1,
+};
+
+static struct ssd1307fb_deviceinfo ssd1307fb_ssd1307_deviceinfo = {
+ .default_vcomh = 0x20,
+ .default_dclk_div = 2,
+ .default_dclk_frq = 12,
+ .need_pwm = 1,
};
static const struct of_device_id ssd1307fb_of_match[] = {
{
.compatible = "solomon,ssd1306fb-i2c",
- .data = (void *)&ssd1307fb_ssd1306_ops,
+ .data = (void *)&ssd1307fb_ssd1306_deviceinfo,
},
{
.compatible = "solomon,ssd1307fb-i2c",
- .data = (void *)&ssd1307fb_ssd1307_ops,
+ .data = (void *)&ssd1307fb_ssd1307_deviceinfo,
},
{},
};
@@ -468,8 +476,8 @@ static int ssd1307fb_probe(struct i2c_client *client,
par->info = info;
par->client = client;
- par->ops = (struct ssd1307fb_ops *)of_match_device(ssd1307fb_of_match,
- &client->dev)->data;
+ par->device_info = (struct ssd1307fb_deviceinfo *)of_match_device(
+ ssd1307fb_of_match, &client->dev)->data;
par->reset = of_get_named_gpio(client->dev.of_node,
"reset-gpios", 0);
@@ -487,6 +495,27 @@ static int ssd1307fb_probe(struct i2c_client *client,
if (of_property_read_u32(node, "solomon,page-offset", &par->page_offset))
par->page_offset = 1;
+ if (of_property_read_u32(node, "solomon,com-offset", &par->com_offset))
+ par->com_offset = 0;
+
+ if (of_property_read_u32(node, "solomon,prechargep1", &par->prechargep1))
+ par->prechargep1 = 2;
+
+ if (of_property_read_u32(node, "solomon,prechargep2", &par->prechargep2))
+ par->prechargep2 = 2;
+
+ par->seg_remap = !of_property_read_bool(node, "solomon,segment-no-remap");
+ par->com_seq = of_property_read_bool(node, "solomon,com-seq");
+ par->com_lrremap = of_property_read_bool(node, "solomon,com-lrremap");
+ par->com_invdir = of_property_read_bool(node, "solomon,com-invdir");
+
+ par->contrast = 127;
+ par->vcomh = par->device_info->default_vcomh;
+
+ /* Setup display timing */
+ par->dclk_div = par->device_info->default_dclk_div;
+ par->dclk_frq = par->device_info->default_dclk_frq;
+
vmem_size = par->width * par->height / 8;
vmem = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
@@ -539,11 +568,9 @@ static int ssd1307fb_probe(struct i2c_client *client,
gpio_set_value(par->reset, 1);
udelay(4);
- if (par->ops->init) {
- ret = par->ops->init(par);
- if (ret)
- goto reset_oled_error;
- }
+ ret = ssd1307fb_init(par);
+ if (ret)
+ goto reset_oled_error;
ret = register_framebuffer(info);
if (ret) {
@@ -556,8 +583,10 @@ static int ssd1307fb_probe(struct i2c_client *client,
return 0;
panel_init_error:
- if (par->ops->remove)
- par->ops->remove(par);
+ if (par->device_info->need_pwm) {
+ pwm_disable(par->pwm);
+ pwm_put(par->pwm);
+ };
reset_oled_error:
fb_deferred_io_cleanup(info);
fb_alloc_error:
@@ -571,8 +600,10 @@ static int ssd1307fb_remove(struct i2c_client *client)
struct ssd1307fb_par *par = info->par;
unregister_framebuffer(info);
- if (par->ops->remove)
- par->ops->remove(par);
+ if (par->device_info->need_pwm) {
+ pwm_disable(par->pwm);
+ pwm_put(par->pwm);
+ };
fb_deferred_io_cleanup(info);
__free_pages(__va(info->fix.smem_start), get_order(info->fix.smem_len));
framebuffer_release(info);
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-09 03:03:39 +0000