summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/ABI/testing/debugfs-moxtet23
-rw-r--r--Documentation/ABI/testing/sysfs-bus-moxtet-devices17
-rw-r--r--Documentation/ABI/testing/sysfs-devices-soc7
-rw-r--r--Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm37
-rw-r--r--Documentation/devicetree/bindings/arm/arm,scmi.txt17
-rw-r--r--Documentation/devicetree/bindings/bus/moxtet.txt46
-rw-r--r--Documentation/devicetree/bindings/firmware/cznic,turris-mox-rwtm.txt19
-rw-r--r--Documentation/devicetree/bindings/firmware/qcom,scm.txt4
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-moxtet.txt18
-rw-r--r--Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml93
-rw-r--r--Documentation/devicetree/bindings/reset/fsl,imx7-src.txt6
-rw-r--r--Documentation/devicetree/bindings/reset/snps,dw-reset.txt30
-rw-r--r--Documentation/devicetree/bindings/soc/amlogic/clk-measure.txt1
-rw-r--r--Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt13
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt5
-rw-r--r--Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt11
-rw-r--r--MAINTAINERS17
-rw-r--r--arch/arm/common/scoop.c2
-rw-r--r--arch/arm/mach-davinci/board-da850-evm.c90
-rw-r--r--drivers/base/soc.c9
-rw-r--r--drivers/bus/Kconfig10
-rw-r--r--drivers/bus/Makefile1
-rw-r--r--drivers/bus/fsl-mc/fsl-mc-allocator.c1
-rw-r--r--drivers/bus/fsl-mc/mc-io.c1
-rw-r--r--drivers/bus/imx-weim.c34
-rw-r--r--drivers/bus/moxtet.c885
-rw-r--r--drivers/bus/sunxi-rsb.c4
-rw-r--r--drivers/bus/uniphier-system-bus.c4
-rw-r--r--drivers/clk/clk-scmi.c2
-rw-r--r--drivers/firmware/Kconfig14
-rw-r--r--drivers/firmware/Makefile1
-rw-r--r--drivers/firmware/arm_scmi/Makefile2
-rw-r--r--drivers/firmware/arm_scmi/base.c2
-rw-r--r--drivers/firmware/arm_scmi/clock.c33
-rw-r--r--drivers/firmware/arm_scmi/common.h18
-rw-r--r--drivers/firmware/arm_scmi/driver.c366
-rw-r--r--drivers/firmware/arm_scmi/perf.c264
-rw-r--r--drivers/firmware/arm_scmi/power.c6
-rw-r--r--drivers/firmware/arm_scmi/reset.c231
-rw-r--r--drivers/firmware/arm_scmi/sensors.c57
-rw-r--r--drivers/firmware/imx/Kconfig11
-rw-r--r--drivers/firmware/imx/Makefile1
-rw-r--r--drivers/firmware/imx/imx-dsp.c155
-rw-r--r--drivers/firmware/imx/scu-pd.c4
-rw-r--r--drivers/firmware/qcom_scm.c47
-rw-r--r--drivers/firmware/ti_sci.c45
-rw-r--r--drivers/firmware/turris-mox-rwtm.c384
-rw-r--r--drivers/gpio/Kconfig9
-rw-r--r--drivers/gpio/Makefile1
-rw-r--r--drivers/gpio/gpio-moxtet.c179
-rw-r--r--drivers/hwmon/scmi-hwmon.c2
-rw-r--r--drivers/net/ethernet/Kconfig1
-rw-r--r--drivers/net/ethernet/Makefile1
-rw-r--r--drivers/net/ethernet/micrel/Kconfig11
-rw-r--r--drivers/net/ethernet/micrel/Makefile1
-rw-r--r--drivers/net/ethernet/micrel/ks8695net.c1632
-rw-r--r--drivers/net/ethernet/micrel/ks8695net.h108
-rw-r--r--drivers/net/ethernet/nuvoton/Kconfig29
-rw-r--r--drivers/net/ethernet/nuvoton/Makefile6
-rw-r--r--drivers/net/ethernet/nuvoton/w90p910_ether.c1082
-rw-r--r--drivers/reset/Kconfig13
-rw-r--r--drivers/reset/Makefile1
-rw-r--r--drivers/reset/reset-imx7.c12
-rw-r--r--drivers/reset/reset-meson.c51
-rw-r--r--drivers/reset/reset-scmi.c124
-rw-r--r--drivers/reset/reset-simple.c3
-rw-r--r--drivers/soc/amlogic/Kconfig11
-rw-r--r--drivers/soc/amlogic/Makefile1
-rw-r--r--drivers/soc/amlogic/meson-clk-measure.c148
-rw-r--r--drivers/soc/amlogic/meson-ee-pwrc.c492
-rw-r--r--drivers/soc/amlogic/meson-gx-socinfo.c7
-rw-r--r--drivers/soc/fsl/dpaa2-console.c2
-rw-r--r--drivers/soc/fsl/dpio/dpio-service.c2
-rw-r--r--drivers/soc/fsl/guts.c6
-rw-r--r--drivers/soc/fsl/qbman/bman.c17
-rw-r--r--drivers/soc/fsl/qbman/bman_ccsr.c36
-rw-r--r--drivers/soc/fsl/qbman/bman_portal.c22
-rw-r--r--drivers/soc/fsl/qbman/bman_priv.h5
-rw-r--r--drivers/soc/fsl/qbman/dpaa_sys.c63
-rw-r--r--drivers/soc/fsl/qbman/qman.c83
-rw-r--r--drivers/soc/fsl/qbman/qman_ccsr.c68
-rw-r--r--drivers/soc/fsl/qbman/qman_portal.c22
-rw-r--r--drivers/soc/fsl/qbman/qman_priv.h8
-rw-r--r--drivers/soc/fsl/qe/qe.c163
-rw-r--r--drivers/soc/imx/gpcv2.c2
-rw-r--r--drivers/soc/imx/soc-imx-scu.c39
-rw-r--r--drivers/soc/imx/soc-imx8.c45
-rw-r--r--drivers/soc/mediatek/mtk-cmdq-helper.c10
-rw-r--r--drivers/soc/qcom/Kconfig8
-rw-r--r--drivers/soc/qcom/Makefile1
-rw-r--r--drivers/soc/qcom/qcom_aoss.c133
-rw-r--r--drivers/soc/qcom/smem.c11
-rw-r--r--drivers/soc/qcom/socinfo.c476
-rw-r--r--drivers/soc/renesas/Kconfig11
-rw-r--r--drivers/soc/renesas/rcar-sysc.c7
-rw-r--r--drivers/soc/renesas/rmobile-sysc.c31
-rw-r--r--drivers/soc/samsung/Kconfig6
-rw-r--r--drivers/soc/samsung/Makefile2
-rw-r--r--drivers/soc/samsung/exynos-chipid.c105
-rw-r--r--drivers/soc/ti/ti_sci_pm_domains.c23
-rw-r--r--drivers/spi/Kconfig7
-rw-r--r--drivers/spi/Makefile1
-rw-r--r--drivers/spi/spi-nuc900.c426
-rw-r--r--drivers/tee/optee/call.c1
-rw-r--r--drivers/video/fbdev/Kconfig14
-rw-r--r--drivers/video/fbdev/Makefile1
-rw-r--r--drivers/video/fbdev/da8xx-fb.c118
-rw-r--r--drivers/video/fbdev/nuc900fb.c760
-rw-r--r--drivers/video/fbdev/nuc900fb.h51
-rw-r--r--include/Kbuild2
-rw-r--r--include/dt-bindings/bus/moxtet.h16
-rw-r--r--include/dt-bindings/power/meson-g12a-power.h13
-rw-r--r--include/dt-bindings/power/meson-sm1-power.h18
-rw-r--r--include/dt-bindings/reset/amlogic,meson-gxbb-reset.h51
-rw-r--r--include/dt-bindings/reset/amlogic,meson8b-reset.h51
-rw-r--r--include/dt-bindings/reset/imx8mq-reset.h34
-rw-r--r--include/dt-bindings/soc/ti,sci_pm_domain.h9
-rw-r--r--include/linux/firmware/imx/dsp.h67
-rw-r--r--include/linux/moxtet.h109
-rw-r--r--include/linux/platform_data/spi-nuc900.h29
-rw-r--r--include/linux/platform_data/video-nuc900fb.h79
-rw-r--r--include/linux/qcom_scm.h9
-rw-r--r--include/linux/scmi_protocol.h46
-rw-r--r--include/linux/soc/mediatek/mtk-cmdq.h14
-rw-r--r--include/linux/soc/samsung/exynos-chipid.h52
-rw-r--r--include/linux/soc/ti/ti_sci_protocol.h3
-rw-r--r--include/linux/sys_soc.h1
-rw-r--r--include/video/da8xx-fb.h1
128 files changed, 5409 insertions, 4954 deletions
diff --git a/Documentation/ABI/testing/debugfs-moxtet b/Documentation/ABI/testing/debugfs-moxtet
new file mode 100644
index 000000000000..67b1717794d8
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-moxtet
@@ -0,0 +1,23 @@
+What: /sys/kernel/debug/moxtet/input
+Date: March 2019
+KernelVersion: 5.3
+Contact: Marek Behún <marek.behun@nic.cz>
+Description: (R) Read input from the shift registers, in hexadecimal.
+ Returns N+1 bytes, where N is the number of Moxtet connected
+ modules. The first byte is from the CPU board itself.
+ Example: 101214
+ 10: CPU board with SD card
+ 12: 2 = PCIe module, 1 = IRQ not active
+ 14: 4 = Peridot module, 1 = IRQ not active
+
+What: /sys/kernel/debug/moxtet/output
+Date: March 2019
+KernelVersion: 5.3
+Contact: Marek Behún <marek.behun@nic.cz>
+Description: (RW) Read last written value to the shift registers, in
+ hexadecimal, or write values to the shift registers, also
+ in hexadecimal.
+ Example: 0102
+ 01: 01 was last written, or is to be written, to the
+ first module's shift register
+ 02: the same for second module
diff --git a/Documentation/ABI/testing/sysfs-bus-moxtet-devices b/Documentation/ABI/testing/sysfs-bus-moxtet-devices
new file mode 100644
index 000000000000..355958527fa3
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-moxtet-devices
@@ -0,0 +1,17 @@
+What: /sys/bus/moxtet/devices/moxtet-<name>.<addr>/module_description
+Date: March 2019
+KernelVersion: 5.3
+Contact: Marek Behún <marek.behun@nic.cz>
+Description: (R) Moxtet module description. Format: string
+
+What: /sys/bus/moxtet/devices/moxtet-<name>.<addr>/module_id
+Date: March 2019
+KernelVersion: 5.3
+Contact: Marek Behún <marek.behun@nic.cz>
+Description: (R) Moxtet module ID. Format: %x
+
+What: /sys/bus/moxtet/devices/moxtet-<name>.<addr>/module_name
+Date: March 2019
+KernelVersion: 5.3
+Contact: Marek Behún <marek.behun@nic.cz>
+Description: (R) Moxtet module name. Format: string
diff --git a/Documentation/ABI/testing/sysfs-devices-soc b/Documentation/ABI/testing/sysfs-devices-soc
index 6d9cc253f2b2..ba3a3fac0ee1 100644
--- a/Documentation/ABI/testing/sysfs-devices-soc
+++ b/Documentation/ABI/testing/sysfs-devices-soc
@@ -26,6 +26,13 @@ Description:
Read-only attribute common to all SoCs. Contains SoC family name
(e.g. DB8500).
+What: /sys/devices/socX/serial_number
+Date: January 2019
+contact: Bjorn Andersson <bjorn.andersson@linaro.org>
+Description:
+ Read-only attribute supported by most SoCs. Contains the SoC's
+ serial number, if available.
+
What: /sys/devices/socX/soc_id
Date: January 2012
contact: Lee Jones <lee.jones@linaro.org>
diff --git a/Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm b/Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm
new file mode 100644
index 000000000000..15595fab88d1
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm
@@ -0,0 +1,37 @@
+What: /sys/firmware/turris-mox-rwtm/board_version
+Date: August 2019
+KernelVersion: 5.4
+Contact: Marek Behún <marek.behun@nic.cz>
+Description: (R) Board version burned into eFuses of this Turris Mox board.
+ Format: %i
+
+What: /sys/firmware/turris-mox-rwtm/mac_address*
+Date: August 2019
+KernelVersion: 5.4
+Contact: Marek Behún <marek.behun@nic.cz>
+Description: (R) MAC addresses burned into eFuses of this Turris Mox board.
+ Format: %pM
+
+What: /sys/firmware/turris-mox-rwtm/pubkey
+Date: August 2019
+KernelVersion: 5.4
+Contact: Marek Behún <marek.behun@nic.cz>
+Description: (R) ECDSA public key (in pubkey hex compressed form) computed
+ as pair to the ECDSA private key burned into eFuses of this
+ Turris Mox Board.
+ Format: string
+
+What: /sys/firmware/turris-mox-rwtm/ram_size
+Date: August 2019
+KernelVersion: 5.4
+Contact: Marek Behún <marek.behun@nic.cz>
+Description: (R) RAM size in MiB of this Turris Mox board as was detected
+ during manufacturing and burned into eFuses. Can be 512 or 1024.
+ Format: %i
+
+What: /sys/firmware/turris-mox-rwtm/serial_number
+Date: August 2019
+KernelVersion: 5.4
+Contact: Marek Behún <marek.behun@nic.cz>
+Description: (R) Serial number burned into eFuses of this Turris Mox device.
+ Format: %016X
diff --git a/Documentation/devicetree/bindings/arm/arm,scmi.txt b/Documentation/devicetree/bindings/arm/arm,scmi.txt
index 317a2fc3667a..083dbf96ee00 100644
--- a/Documentation/devicetree/bindings/arm/arm,scmi.txt
+++ b/Documentation/devicetree/bindings/arm/arm,scmi.txt
@@ -73,6 +73,16 @@ Required properties:
as used by the firmware. Refer to platform details
for your implementation for the IDs to use.
+Reset signal bindings for the reset domains based on SCMI Message Protocol
+------------------------------------------------------------
+
+This binding for the SCMI reset domain providers uses the generic reset
+signal binding[5].
+
+Required properties:
+ - #reset-cells : Should be 1. Contains the reset domain ID value used
+ by SCMI commands.
+
SRAM and Shared Memory for SCMI
-------------------------------
@@ -93,6 +103,7 @@ Required sub-node properties:
[2] Documentation/devicetree/bindings/power/power_domain.txt
[3] Documentation/devicetree/bindings/thermal/thermal.txt
[4] Documentation/devicetree/bindings/sram/sram.txt
+[5] Documentation/devicetree/bindings/reset/reset.txt
Example:
@@ -152,6 +163,11 @@ firmware {
reg = <0x15>;
#thermal-sensor-cells = <1>;
};
+
+ scmi_reset: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
};
};
@@ -166,6 +182,7 @@ hdlcd@7ff60000 {
reg = <0 0x7ff60000 0 0x1000>;
clocks = <&scmi_clk 4>;
power-domains = <&scmi_devpd 1>;
+ resets = <&scmi_reset 10>;
};
thermal-zones {
diff --git a/Documentation/devicetree/bindings/bus/moxtet.txt b/Documentation/devicetree/bindings/bus/moxtet.txt
new file mode 100644
index 000000000000..fb50fc865336
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/moxtet.txt
@@ -0,0 +1,46 @@
+Turris Mox module status and configuration bus (over SPI)
+
+Required properties:
+ - compatible : Should be "cznic,moxtet"
+ - #address-cells : Has to be 1
+ - #size-cells : Has to be 0
+ - spi-cpol : Required inverted clock polarity
+ - spi-cpha : Required shifted clock phase
+ - interrupts : Must contain reference to the shared interrupt line
+ - interrupt-controller : Required
+ - #interrupt-cells : Has to be 1
+
+For other required and optional properties of SPI slave nodes please refer to
+../spi/spi-bus.txt.
+
+Required properties of subnodes:
+ - reg : Should be position on the Moxtet bus (how many Moxtet
+ modules are between this module and CPU module, so
+ either 0 or a positive integer)
+
+The driver finds the devices connected to the bus by itself, but it may be
+needed to reference some of them from other parts of the device tree. In that
+case the devices can be defined as subnodes of the moxtet node.
+
+Example:
+
+ moxtet@1 {
+ compatible = "cznic,moxtet";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ spi-max-frequency = <10000000>;
+ spi-cpol;
+ spi-cpha;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gpiosb>;
+ interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+
+ moxtet_sfp: gpio@0 {
+ compatible = "cznic,moxtet-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0>;
+ }
+ };
diff --git a/Documentation/devicetree/bindings/firmware/cznic,turris-mox-rwtm.txt b/Documentation/devicetree/bindings/firmware/cznic,turris-mox-rwtm.txt
new file mode 100644
index 000000000000..338169dea7bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/cznic,turris-mox-rwtm.txt
@@ -0,0 +1,19 @@
+Turris Mox rWTM firmware driver
+
+Required properties:
+ - compatible : Should be "cznic,turris-mox-rwtm"
+ - mboxes : Must contain a reference to associated mailbox
+
+This device tree node should be used on Turris Mox, or potentially another A3700
+compatible device running the Mox's rWTM firmware in the secure processor (for
+example it is possible to flash this firmware into EspressoBin).
+
+Example:
+
+ firmware {
+ turris-mox-rwtm {
+ compatible = "cznic,turris-mox-rwtm";
+ mboxes = <&rwtm 0>;
+ status = "okay";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
index 41f133a4e2fa..3f29ea04b5fe 100644
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
@@ -9,14 +9,16 @@ Required properties:
- compatible: must contain one of the following:
* "qcom,scm-apq8064"
* "qcom,scm-apq8084"
+ * "qcom,scm-ipq4019"
* "qcom,scm-msm8660"
* "qcom,scm-msm8916"
* "qcom,scm-msm8960"
* "qcom,scm-msm8974"
* "qcom,scm-msm8996"
* "qcom,scm-msm8998"
- * "qcom,scm-ipq4019"
+ * "qcom,scm-sc7180"
* "qcom,scm-sdm845"
+ * "qcom,scm-sm8150"
and:
* "qcom,scm"
- clocks: Specifies clocks needed by the SCM interface, if any:
diff --git a/Documentation/devicetree/bindings/gpio/gpio-moxtet.txt b/Documentation/devicetree/bindings/gpio/gpio-moxtet.txt
new file mode 100644
index 000000000000..410759de9f09
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-moxtet.txt
@@ -0,0 +1,18 @@
+Turris Mox Moxtet GPIO expander via Moxtet bus
+
+Required properties:
+ - compatible : Should be "cznic,moxtet-gpio".
+ - gpio-controller : Marks the device node as a GPIO controller.
+ - #gpio-cells : Should be two. For consumer use see gpio.txt.
+
+Other properties are required for a Moxtet bus device, please refer to
+Documentation/devicetree/bindings/bus/moxtet.txt.
+
+Example:
+
+ moxtet_sfp: gpio@0 {
+ compatible = "cznic,moxtet-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0>;
+ }
diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
new file mode 100644
index 000000000000..aab70e8b681e
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/amlogic,meson-ee-pwrc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic Meson Everything-Else Power Domains
+
+maintainers:
+ - Neil Armstrong <narmstrong@baylibre.com>
+
+description: |+
+ The Everything-Else Power Domains node should be the child of a syscon
+ node with the required property:
+
+ - compatible: Should be the following:
+ "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"
+
+ Refer to the the bindings described in
+ Documentation/devicetree/bindings/mfd/syscon.txt
+
+properties:
+ compatible:
+ enum:
+ - amlogic,meson-g12a-pwrc
+ - amlogic,meson-sm1-pwrc
+
+ clocks:
+ minItems: 2
+
+ clock-names:
+ items:
+ - const: vpu
+ - const: vapb
+
+ resets:
+ minItems: 11
+
+ reset-names:
+ items:
+ - const: viu
+ - const: venc
+ - const: vcbus
+ - const: bt656
+ - const: rdma
+ - const: venci
+ - const: vencp
+ - const: vdac
+ - const: vdi6
+ - const: vencl
+ - const: vid_lock
+
+ "#power-domain-cells":
+ const: 1
+
+ amlogic,ao-sysctrl:
+ description: phandle to the AO sysctrl node
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - "#power-domain-cells"
+ - amlogic,ao-sysctrl
+
+examples:
+ - |
+ pwrc: power-controller {
+ compatible = "amlogic,meson-sm1-pwrc";
+ #power-domain-cells = <1>;
+ amlogic,ao-sysctrl = <&rti>;
+ resets = <&reset_viu>,
+ <&reset_venc>,
+ <&reset_vcbus>,
+ <&reset_bt656>,
+ <&reset_rdma>,
+ <&reset_venci>,
+ <&reset_vencp>,
+ <&reset_vdac>,
+ <&reset_vdi6>,
+ <&reset_vencl>,
+ <&reset_vid_lock>;
+ reset-names = "viu", "venc", "vcbus", "bt656",
+ "rdma", "venci", "vencp", "vdac",
+ "vdi6", "vencl", "vid_lock";
+ clocks = <&clk_vpu>, <&clk_vapb>;
+ clock-names = "vpu", "vapb";
+ };
diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
index 13e095182db4..c2489e41a801 100644
--- a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
+++ b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
@@ -8,6 +8,7 @@ Required properties:
- compatible:
- For i.MX7 SoCs should be "fsl,imx7d-src", "syscon"
- For i.MX8MQ SoCs should be "fsl,imx8mq-src", "syscon"
+ - For i.MX8MM SoCs should be "fsl,imx8mm-src", "fsl,imx8mq-src", "syscon"
- reg: should be register base and length as documented in the
datasheet
- interrupts: Should contain SRC interrupt
@@ -46,5 +47,6 @@ Example:
For list of all valid reset indices see
-<dt-bindings/reset/imx7-reset.h> for i.MX7 and
-<dt-bindings/reset/imx8mq-reset.h> for i.MX8MQ
+<dt-bindings/reset/imx7-reset.h> for i.MX7,
+<dt-bindings/reset/imx8mq-reset.h> for i.MX8MQ and
+<dt-bindings/reset/imx8mq-reset.h> for i.MX8MM
diff --git a/Documentation/devicetree/bindings/reset/snps,dw-reset.txt b/Documentation/devicetree/bindings/reset/snps,dw-reset.txt
new file mode 100644
index 000000000000..f94f911dd98d
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/snps,dw-reset.txt
@@ -0,0 +1,30 @@
+Synopsys DesignWare Reset controller
+=======================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+
+- compatible: should be one of the following.
+ "snps,dw-high-reset" - for active high configuration
+ "snps,dw-low-reset" - for active low configuration
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #reset-cells: must be 1.
+
+example:
+
+ dw_rst_1: reset-controller@0000 {
+ compatible = "snps,dw-high-reset";
+ reg = <0x0000 0x4>;
+ #reset-cells = <1>;
+ };
+
+ dw_rst_2: reset-controller@1000 {i
+ compatible = "snps,dw-low-reset";
+ reg = <0x1000 0x8>;
+ #reset-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/soc/amlogic/clk-measure.txt b/Documentation/devicetree/bindings/soc/amlogic/clk-measure.txt
index 6bf6b43f8dd8..3dd563cec794 100644
--- a/Documentation/devicetree/bindings/soc/amlogic/clk-measure.txt
+++ b/Documentation/devicetree/bindings/soc/amlogic/clk-measure.txt
@@ -11,6 +11,7 @@ Required properties:
"amlogic,meson8b-clk-measure" for Meson8b SoCs
"amlogic,meson-axg-clk-measure" for AXG SoCs
"amlogic,meson-g12a-clk-measure" for G12a SoCs
+ "amlogic,meson-sm1-clk-measure" for SM1 SoCs
- reg: base address and size of the Clock Measurer register space.
Example:
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt
index d7afaff5faff..05ec2a838c54 100644
--- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt
@@ -18,7 +18,8 @@ Required properties:
- reg : offset and length of the device registers.
- bus-frequency : the clock frequency for QUICC Engine.
- fsl,qe-num-riscs: define how many RISC engines the QE has.
-- fsl,qe-num-snums: define how many serial number(SNUM) the QE can use for the
+- fsl,qe-snums: This property has to be specified as '/bits/ 8' value,
+ defining the array of serial number (SNUM) values for the virtual
threads.
Optional properties:
@@ -34,6 +35,11 @@ Recommended properties
- brg-frequency : the internal clock source frequency for baud-rate
generators in Hz.
+Deprecated properties
+- fsl,qe-num-snums: define how many serial number(SNUM) the QE can use
+ for the threads. Use fsl,qe-snums instead to not only specify the
+ number of snums, but also their values.
+
Example:
qe@e0100000 {
#address-cells = <1>;
@@ -44,6 +50,11 @@ Example:
reg = <e0100000 480>;
brg-frequency = <0>;
bus-frequency = <179A7B00>;
+ fsl,qe-snums = /bits/ 8 <
+ 0x04 0x05 0x0C 0x0D 0x14 0x15 0x1C 0x1D
+ 0x24 0x25 0x2C 0x2D 0x34 0x35 0x88 0x89
+ 0x98 0x99 0xA8 0xA9 0xB8 0xB9 0xC8 0xC9
+ 0xD8 0xD9 0xE8 0xE9>;
}
* Multi-User RAM (MURAM)
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt
index 954ffee0a9c4..4fc571e78f01 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt
@@ -15,7 +15,10 @@ power-domains.
- compatible:
Usage: required
Value type: <string>
- Definition: must be "qcom,sdm845-aoss-qmp"
+ Definition: must be one of:
+ "qcom,sc7180-aoss-qmp"
+ "qcom,sdm845-aoss-qmp"
+ "qcom,sm8150-aoss-qmp"
- reg:
Usage: required
diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
index f7b00a7c0f68..f541d1f776a2 100644
--- a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
+++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
@@ -19,8 +19,15 @@ child of the pmmc node.
Required Properties:
--------------------
- compatible: should be "ti,sci-pm-domain"
-- #power-domain-cells: Must be 1 so that an id can be provided in each
- device node.
+- #power-domain-cells: Can be one of the following:
+ 1: Containing the device id of each node
+ 2: First entry should be device id
+ Second entry should be one of the floowing:
+ TI_SCI_PD_EXCLUSIVE: To allow device to be
+ exclusively controlled by
+ the requesting hosts.
+ TI_SCI_PD_SHARED: To allow device to be shared
+ by multiple hosts.
Example (K2G):
-------------
diff --git a/MAINTAINERS b/MAINTAINERS
index 1dc49553238c..5be81cdf9338 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1617,6 +1617,21 @@ F: drivers/clocksource/timer-atlas7.c
N: [^a-z]sirf
X: drivers/gnss
+ARM/CZ.NIC TURRIS MOX SUPPORT
+M: Marek Behun <marek.behun@nic.cz>
+W: http://mox.turris.cz
+S: Maintained
+F: Documentation/ABI/testing/debugfs-moxtet
+F: Documentation/ABI/testing/sysfs-bus-moxtet-devices
+F: Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm
+F: Documentation/devicetree/bindings/bus/moxtet.txt
+F: Documentation/devicetree/bindings/firmware/cznic,turris-mox-rwtm.txt
+F: Documentation/devicetree/bindings/gpio/gpio-moxtet.txt
+F: include/linux/moxtet.h
+F: drivers/bus/moxtet.c
+F: drivers/firmware/turris-mox-rwtm.c
+F: drivers/gpio/gpio-moxtet.c
+
ARM/EBSA110 MACHINE SUPPORT
M: Russell King <linux@armlinux.org.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -15530,6 +15545,7 @@ F: drivers/clk/clk-sc[mp]i.c
F: drivers/cpufreq/sc[mp]i-cpufreq.c
F: drivers/firmware/arm_scpi.c
F: drivers/firmware/arm_scmi/
+F: drivers/reset/reset-scmi.c
F: include/linux/sc[mp]i_protocol.h
SYSTEM RESET/SHUTDOWN DRIVERS
@@ -15838,6 +15854,7 @@ F: drivers/firmware/ti_sci*
F: include/linux/soc/ti/ti_sci_protocol.h
F: Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
F: drivers/soc/ti/ti_sci_pm_domains.c
+F: include/dt-bindings/soc/ti,sci_pm_domain.h
F: Documentation/devicetree/bindings/reset/ti,sci-reset.txt
F: Documentation/devicetree/bindings/clock/ti,sci-clk.txt
F: drivers/clk/keystone/sci-clk.c
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index 60130bd7b182..6edb961bd6c1 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -8,7 +8,7 @@
*/
#include <linux/device.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 0628e7d7dcf3..5b3549f1236c 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -36,6 +36,7 @@
#include <linux/platform_data/ti-aemif.h>
#include <linux/platform_data/spi-davinci.h>
#include <linux/platform_data/uio_pruss.h>
+#include <linux/property.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/tps6507x.h>
#include <linux/regulator/fixed.h>
@@ -802,37 +803,79 @@ static const short da850_evm_mmcsd0_pins[] __initconst = {
-1
};
-static void da850_panel_power_ctrl(int val)
-{
- /* lcd backlight */
- gpio_set_value(DA850_LCD_BL_PIN, val);
+static struct property_entry da850_lcd_backlight_props[] = {
+ PROPERTY_ENTRY_BOOL("default-on"),
+ { }
+};
- /* lcd power */
- gpio_set_value(DA850_LCD_PWR_PIN, val);
-}
+static struct gpiod_lookup_table da850_lcd_backlight_gpio_table = {
+ .dev_id = "gpio-backlight",
+ .table = {
+ GPIO_LOOKUP("davinci_gpio", DA850_LCD_BL_PIN, NULL, 0),
+ { }
+ },
+};
+
+static const struct platform_device_info da850_lcd_backlight_info = {
+ .name = "gpio-backlight",
+ .id = PLATFORM_DEVID_NONE,
+ .properties = da850_lcd_backlight_props,
+};
+
+static struct regulator_consumer_supply da850_lcd_supplies[] = {
+ REGULATOR_SUPPLY("lcd", NULL),
+};
+
+static struct regulator_init_data da850_lcd_supply_data = {
+ .consumer_supplies = da850_lcd_supplies,
+ .num_consumer_supplies = ARRAY_SIZE(da850_lcd_supplies),
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static struct fixed_voltage_config da850_lcd_supply = {
+ .supply_name = "lcd",
+ .microvolts = 33000000,
+ .init_data = &da850_lcd_supply_data,
+};
+
+static struct platform_device da850_lcd_supply_device = {
+ .name = "reg-fixed-voltage",
+ .id = 1, /* Dummy fixed regulator is 0 */
+ .dev = {
+ .platform_data = &da850_lcd_supply,
+ },
+};
+
+static struct gpiod_lookup_table da850_lcd_supply_gpio_table = {
+ .dev_id = "reg-fixed-voltage.1",
+ .table = {
+ GPIO_LOOKUP("davinci_gpio", DA850_LCD_PWR_PIN, NULL, 0),
+ { }
+ },
+};
+
+static struct gpiod_lookup_table *da850_lcd_gpio_lookups[] = {
+ &da850_lcd_backlight_gpio_table,
+ &da850_lcd_supply_gpio_table,
+};
static int da850_lcd_hw_init(void)
{
+ struct platform_device *backlight;
int status;
- status = gpio_request(DA850_LCD_BL_PIN, "lcd bl");
- if (status < 0)
- return status;
-
- status = gpio_request(DA850_LCD_PWR_PIN, "lcd pwr");
- if (status < 0) {
- gpio_free(DA850_LCD_BL_PIN);
- return status;
- }
+ gpiod_add_lookup_tables(da850_lcd_gpio_lookups,
+ ARRAY_SIZE(da850_lcd_gpio_lookups));
- gpio_direction_output(DA850_LCD_BL_PIN, 0);
- gpio_direction_output(DA850_LCD_PWR_PIN, 0);
+ backlight = platform_device_register_full(&da850_lcd_backlight_info);
+ if (IS_ERR(backlight))
+ return PTR_ERR(backlight);
- /* Switch off panel power and backlight */
- da850_panel_power_ctrl(0);
-
- /* Switch on panel power and backlight */
- da850_panel_power_ctrl(1);
+ status = platform_device_register(&da850_lcd_supply_device);
+ if (status)
+ return status;
return 0;
}
@@ -1443,7 +1486,6 @@ static __init void da850_evm_init(void)
if (ret)
pr_warn("%s: LCD initialization failed: %d\n", __func__, ret);
- sharp_lk043t1dg01_pdata.panel_power_ctrl = da850_panel_power_ctrl,
ret = da8xx_register_lcdc(&sharp_lk043t1dg01_pdata);
if (ret)
pr_warn("%s: LCDC registration failed: %d\n", __func__, ret);
diff --git a/drivers/base/soc.c b/drivers/base/soc.c
index 10b280f30217..7c0c5ca5953d 100644
--- a/drivers/base/soc.c
+++ b/drivers/base/soc.c
@@ -33,6 +33,7 @@ static struct bus_type soc_bus_type = {
static DEVICE_ATTR(machine, S_IRUGO, soc_info_get, NULL);
static DEVICE_ATTR(family, S_IRUGO, soc_info_get, NULL);
+static DEVICE_ATTR(serial_number, S_IRUGO, soc_info_get, NULL);
static DEVICE_ATTR(soc_id, S_IRUGO, soc_info_get, NULL);
static DEVICE_ATTR(revision, S_IRUGO, soc_info_get, NULL);
@@ -57,6 +58,9 @@ static umode_t soc_attribute_mode(struct kobject *kobj,
if ((attr == &dev_attr_revision.attr)
&& (soc_dev->attr->revision != NULL))
return attr->mode;
+ if ((attr == &dev_attr_serial_number.attr)
+ && (soc_dev->attr->serial_number != NULL))
+ return attr->mode;
if ((attr == &dev_attr_soc_id.attr)
&& (soc_dev->attr->soc_id != NULL))
return attr->mode;
@@ -77,6 +81,8 @@ static ssize_t soc_info_get(struct device *dev,
return sprintf(buf, "%s\n", soc_dev->attr->family);
if (attr == &dev_attr_revision)
return sprintf(buf, "%s\n", soc_dev->attr->revision);
+ if (attr == &dev_attr_serial_number)
+ return sprintf(buf, "%s\n", soc_dev->attr->serial_number);
if (attr == &dev_attr_soc_id)
return sprintf(buf, "%s\n", soc_dev->attr->soc_id);
@@ -87,6 +93,7 @@ static ssize_t soc_info_get(struct device *dev,
static struct attribute *soc_attr[] = {
&dev_attr_machine.attr,
&dev_attr_family.attr,
+ &dev_attr_serial_number.attr,
&dev_attr_soc_id.attr,
&dev_attr_revision.attr,
NULL,
@@ -157,6 +164,7 @@ out2:
out1:
return ERR_PTR(ret);
}
+EXPORT_SYMBOL_GPL(soc_device_register);
/* Ensure soc_dev->attr is freed prior to calling soc_device_unregister. */
void soc_device_unregister(struct soc_device *soc_dev)
@@ -166,6 +174,7 @@ void soc_device_unregister(struct soc_device *soc_dev)
device_unregister(&soc_dev->dev);
early_soc_dev_attr = NULL;
}
+EXPORT_SYMBOL_GPL(soc_device_unregister);
static int __init soc_bus_register(void)
{
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 1851112ccc29..6b331061d34b 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -29,6 +29,16 @@ config BRCMSTB_GISB_ARB
arbiter. This driver provides timeout and target abort error handling
and internal bus master decoding.
+config MOXTET
+ tristate "CZ.NIC Turris Mox module configuration bus"
+ depends on SPI_MASTER && OF
+ help
+ Say yes here to add support for the module configuration bus found
+ on CZ.NIC's Turris Mox. This is needed for the ability to discover
+ the order in which the modules are connected and to get/set some of
+ their settings. For example the GPIOs on Mox SFP module are
+ configured through this bus.
+
config HISILICON_LPC
bool "Support for ISA I/O space on HiSilicon Hip06/7"
depends on ARM64 && (ARCH_HISI || COMPILE_TEST)
diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
index ca300b1914ce..16b43d3468c6 100644
--- a/drivers/bus/Makefile
+++ b/drivers/bus/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_ARM_CCI) += arm-cci.o
obj-$(CONFIG_HISILICON_LPC) += hisi_lpc.o
obj-$(CONFIG_BRCMSTB_GISB_ARB) += brcmstb_gisb.o
+obj-$(CONFIG_MOXTET) += moxtet.o
# DPAA2 fsl-mc bus
obj-$(CONFIG_FSL_MC_BUS) += fsl-mc/
diff --git a/drivers/bus/fsl-mc/fsl-mc-allocator.c b/drivers/bus/fsl-mc/fsl-mc-allocator.c
index 8ad77246f322..cc7bb900f524 100644
--- a/drivers/bus/fsl-mc/fsl-mc-allocator.c
+++ b/drivers/bus/fsl-mc/fsl-mc-allocator.c
@@ -330,7 +330,6 @@ void fsl_mc_object_free(struct fsl_mc_device *mc_adev)
fsl_mc_resource_free(resource);
- device_link_del(mc_adev->consumer_link);
mc_adev->consumer_link = NULL;
}
EXPORT_SYMBOL_GPL(fsl_mc_object_free);
diff --git a/drivers/bus/fsl-mc/mc-io.c b/drivers/bus/fsl-mc/mc-io.c
index 3ae574a58cce..d9629fc13a15 100644
--- a/drivers/bus/fsl-mc/mc-io.c
+++ b/drivers/bus/fsl-mc/mc-io.c
@@ -255,7 +255,6 @@ void fsl_mc_portal_free(struct fsl_mc_io *mc_io)
fsl_destroy_mc_io(mc_io);
fsl_mc_resource_free(resource);
- device_link_del(dpmcp_dev->consumer_link);
dpmcp_dev->consumer_link = NULL;
}
EXPORT_SYMBOL_GPL(fsl_mc_portal_free);
diff --git a/drivers/bus/imx-weim.c b/drivers/bus/imx-weim.c
index db74334ca5ef..28bb65a5613f 100644
--- a/drivers/bus/imx-weim.c
+++ b/drivers/bus/imx-weim.c
@@ -19,6 +19,8 @@ struct imx_weim_devtype {
unsigned int cs_count;
unsigned int cs_regs_count;
unsigned int cs_stride;
+ unsigned int wcr_offset;
+ unsigned int wcr_bcm;
};
static const struct imx_weim_devtype imx1_weim_devtype = {
@@ -37,6 +39,8 @@ static const struct imx_weim_devtype imx50_weim_devtype = {
.cs_count = 4,
.cs_regs_count = 6,
.cs_stride = 0x18,
+ .wcr_offset = 0x90,
+ .wcr_bcm = BIT(0),
};
static const struct imx_weim_devtype imx51_weim_devtype = {
@@ -72,7 +76,7 @@ static const struct of_device_id weim_id_table[] = {
};
MODULE_DEVICE_TABLE(of, weim_id_table);
-static int __init imx_weim_gpr_setup(struct platform_device *pdev)
+static int imx_weim_gpr_setup(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct property *prop;
@@ -122,10 +126,10 @@ err:
}
/* Parse and set the timing for this device. */
-static int __init weim_timing_setup(struct device *dev,
- struct device_node *np, void __iomem *base,
- const struct imx_weim_devtype *devtype,
- struct cs_timing_state *ts)
+static int weim_timing_setup(struct device *dev,
+ struct device_node *np, void __iomem *base,
+ const struct imx_weim_devtype *devtype,
+ struct cs_timing_state *ts)
{
u32 cs_idx, value[MAX_CS_REGS_COUNT];
int i, ret;
@@ -183,8 +187,7 @@ static int __init weim_timing_setup(struct device *dev,
return 0;
}
-static int __init weim_parse_dt(struct platform_device *pdev,
- void __iomem *base)
+static int weim_parse_dt(struct platform_device *pdev, void __iomem *base)
{
const struct of_device_id *of_id = of_match_device(weim_id_table,
&pdev->dev);
@@ -192,6 +195,7 @@ static int __init weim_parse_dt(struct platform_device *pdev,
struct device_node *child;
int ret, have_child = 0;
struct cs_timing_state ts = {};
+ u32 reg;
if (devtype == &imx50_weim_devtype) {
ret = imx_weim_gpr_setup(pdev);
@@ -199,6 +203,17 @@ static int __init weim_parse_dt(struct platform_device *pdev,
return ret;
}
+ if (of_property_read_bool(pdev->dev.of_node, "fsl,burst-clk-enable")) {
+ if (devtype->wcr_bcm) {
+ reg = readl(base + devtype->wcr_offset);
+ writel(reg | devtype->wcr_bcm,
+ base + devtype->wcr_offset);
+ } else {
+ dev_err(&pdev->dev, "burst clk mode not supported.\n");
+ return -EINVAL;
+ }
+ }
+
for_each_available_child_of_node(pdev->dev.of_node, child) {
ret = weim_timing_setup(&pdev->dev, child, base, devtype, &ts);
if (ret)
@@ -217,7 +232,7 @@ static int __init weim_parse_dt(struct platform_device *pdev,
return ret;
}
-static int __init weim_probe(struct platform_device *pdev)
+static int weim_probe(struct platform_device *pdev)
{
struct resource *res;
struct clk *clk;
@@ -254,8 +269,9 @@ static struct platform_driver weim_driver = {
.name = "imx-weim",
.of_match_table = weim_id_table,
},
+ .probe = weim_probe,
};
-module_platform_driver_probe(weim_driver, weim_probe);
+module_platform_driver(weim_driver);
MODULE_AUTHOR("Freescale Semiconductor Inc.");
MODULE_DESCRIPTION("i.MX EIM Controller Driver");
diff --git a/drivers/bus/moxtet.c b/drivers/bus/moxtet.c
new file mode 100644
index 000000000000..36cf13eee6b8
--- /dev/null
+++ b/drivers/bus/moxtet.c
@@ -0,0 +1,885 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Turris Mox module configuration bus driver
+ *
+ * Copyright (C) 2019 Marek Behun <marek.behun@nic.cz>
+ */
+
+#include <dt-bindings/bus/moxtet.h>
+#include <linux/bitops.h>
+#include <linux/debugfs.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/moxtet.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/spi/spi.h>
+
+/*
+ * @name: module name for sysfs
+ * @hwirq_base: base index for IRQ for this module (-1 if no IRQs)
+ * @nirqs: how many interrupts does the shift register provide
+ * @desc: module description for kernel log
+ */
+static const struct {
+ const char *name;
+ int hwirq_base;
+ int nirqs;
+ const char *desc;
+} mox_module_table[] = {
+ /* do not change order of this array! */
+ { NULL, 0, 0, NULL },
+ { "sfp", -1, 0, "MOX D (SFP cage)" },
+ { "pci", MOXTET_IRQ_PCI, 1, "MOX B (Mini-PCIe)" },
+ { "topaz", MOXTET_IRQ_TOPAZ, 1, "MOX C (4 port switch)" },
+ { "peridot", MOXTET_IRQ_PERIDOT(0), 1, "MOX E (8 port switch)" },
+ { "usb3", MOXTET_IRQ_USB3, 2, "MOX F (USB 3.0)" },
+ { "pci-bridge", -1, 0, "MOX G (Mini-PCIe bridge)" },
+};
+
+static inline bool mox_module_known(unsigned int id)
+{
+ return id >= TURRIS_MOX_MODULE_FIRST && id <= TURRIS_MOX_MODULE_LAST;
+}
+
+static inline const char *mox_module_name(unsigned int id)
+{
+ if (mox_module_known(id))
+ return mox_module_table[id].name;
+ else
+ return "unknown";
+}
+
+#define DEF_MODULE_ATTR(name, fmt, ...) \
+static ssize_t \
+module_##name##_show(struct device *dev, struct device_attribute *a, \
+ char *buf) \
+{ \
+ struct moxtet_device *mdev = to_moxtet_device(dev); \
+ return sprintf(buf, (fmt), __VA_ARGS__); \
+} \
+static DEVICE_ATTR_RO(module_##name)
+
+DEF_MODULE_ATTR(id, "0x%x\n", mdev->id);
+DEF_MODULE_ATTR(name, "%s\n", mox_module_name(mdev->id));
+DEF_MODULE_ATTR(description, "%s\n",
+ mox_module_known(mdev->id) ? mox_module_table[mdev->id].desc
+ : "");
+
+static struct attribute *moxtet_dev_attrs[] = {
+ &dev_attr_module_id.attr,
+ &dev_attr_module_name.attr,
+ &dev_attr_module_description.attr,
+ NULL,
+};
+
+static const struct attribute_group moxtet_dev_group = {
+ .attrs = moxtet_dev_attrs,
+};
+
+static const struct attribute_group *moxtet_dev_groups[] = {
+ &moxtet_dev_group,
+ NULL,
+};
+
+static int moxtet_match(struct device *dev, struct device_driver *drv)
+{
+ struct moxtet_device *mdev = to_moxtet_device(dev);
+ struct moxtet_driver *tdrv = to_moxtet_driver(drv);
+ const enum turris_mox_module_id *t;
+
+ if (of_driver_match_device(dev, drv))
+ return 1;
+
+ if (!tdrv->id_table)
+ return 0;
+
+ for (t = tdrv->id_table; *t; ++t)
+ if (*t == mdev->id)
+ return 1;
+
+ return 0;
+}
+
+struct bus_type moxtet_bus_type = {
+ .name = "moxtet",
+ .dev_groups = moxtet_dev_groups,
+ .match = moxtet_match,
+};
+EXPORT_SYMBOL_GPL(moxtet_bus_type);
+
+int __moxtet_register_driver(struct module *owner,
+ struct moxtet_driver *mdrv)
+{
+ mdrv->driver.owner = owner;
+ mdrv->driver.bus = &moxtet_bus_type;
+ return driver_register(&mdrv->driver);
+}
+EXPORT_SYMBOL_GPL(__moxtet_register_driver);
+
+static int moxtet_dev_check(struct device *dev, void *data)
+{
+ struct moxtet_device *mdev = to_moxtet_device(dev);
+ struct moxtet_device *new_dev = data;
+
+ if (mdev->moxtet == new_dev->moxtet && mdev->id == new_dev->id &&
+ mdev->idx == new_dev->idx)
+ return -EBUSY;
+ return 0;
+}
+
+static void moxtet_dev_release(struct device *dev)
+{
+ struct moxtet_device *mdev = to_moxtet_device(dev);
+
+ put_device(mdev->moxtet->dev);
+ kfree(mdev);
+}
+
+static struct moxtet_device *
+moxtet_alloc_device(struct moxtet *moxtet)
+{
+ struct moxtet_device *dev;
+
+ if (!get_device(moxtet->dev))
+ return NULL;
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev) {
+ put_device(moxtet->dev);
+ return NULL;
+ }
+
+ dev->moxtet = moxtet;
+ dev->dev.parent = moxtet->dev;
+ dev->dev.bus = &moxtet_bus_type;
+ dev->dev.release = moxtet_dev_release;
+
+ device_initialize(&dev->dev);
+
+ return dev;
+}
+
+static int moxtet_add_device(struct moxtet_device *dev)
+{
+ static DEFINE_MUTEX(add_mutex);
+ int ret;
+
+ if (dev->idx >= TURRIS_MOX_MAX_MODULES || dev->id > 0xf)
+ return -EINVAL;
+
+ dev_set_name(&dev->dev, "moxtet-%s.%u", mox_module_name(dev->id),
+ dev->idx);
+
+ mutex_lock(&add_mutex);
+
+ ret = bus_for_each_dev(&moxtet_bus_type, NULL, dev,
+ moxtet_dev_check);
+ if (ret)
+ goto done;
+
+ ret = device_add(&dev->dev);
+ if (ret < 0)
+ dev_err(dev->moxtet->dev, "can't add %s, status %d\n",
+ dev_name(dev->moxtet->dev), ret);
+
+done:
+ mutex_unlock(&add_mutex);
+ return ret;
+}
+
+static int __unregister(struct device *dev, void *null)
+{
+ if (dev->of_node) {
+ of_node_clear_flag(dev->of_node, OF_POPULATED);
+ of_node_put(dev->of_node);
+ }
+
+ device_unregister(dev);
+
+ return 0;
+}
+
+static struct moxtet_device *
+of_register_moxtet_device(struct moxtet *moxtet, struct device_node *nc)
+{
+ struct moxtet_device *dev;
+ u32 val;
+ int ret;
+
+ dev = moxtet_alloc_device(moxtet);
+ if (!dev) {
+ dev_err(moxtet->dev,
+ "Moxtet device alloc error for %pOF\n", nc);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ ret = of_property_read_u32(nc, "reg", &val);
+ if (ret) {
+ dev_err(moxtet->dev, "%pOF has no valid 'reg' property (%d)\n",
+ nc, ret);
+ goto err_put;
+ }
+
+ dev->idx = val;
+
+ if (dev->idx >= TURRIS_MOX_MAX_MODULES) {
+ dev_err(moxtet->dev, "%pOF Moxtet address 0x%x out of range\n",
+ nc, dev->idx);
+ ret = -EINVAL;
+ goto err_put;
+ }
+
+ dev->id = moxtet->modules[dev->idx];
+
+ if (!dev->id) {
+ dev_err(moxtet->dev, "%pOF Moxtet address 0x%x is empty\n", nc,
+ dev->idx);
+ ret = -ENODEV;
+ goto err_put;
+ }
+
+ of_node_get(nc);
+ dev->dev.of_node = nc;
+
+ ret = moxtet_add_device(dev);
+ if (ret) {
+ dev_err(moxtet->dev,
+ "Moxtet device register error for %pOF\n", nc);
+ of_node_put(nc);
+ goto err_put;
+ }
+
+ return dev;
+
+err_put:
+ put_device(&dev->dev);
+ return ERR_PTR(ret);
+}
+
+static void of_register_moxtet_devices(struct moxtet *moxtet)
+{
+ struct moxtet_device *dev;
+ struct device_node *nc;
+
+ if (!moxtet->dev->of_node)
+ return;
+
+ for_each_available_child_of_node(moxtet->dev->of_node, nc) {
+ if (of_node_test_and_set_flag(nc, OF_POPULATED))
+ continue;
+ dev = of_register_moxtet_device(moxtet, nc);
+ if (IS_ERR(dev)) {
+ dev_warn(moxtet->dev,
+ "Failed to create Moxtet device for %pOF\n",
+ nc);
+ of_node_clear_flag(nc, OF_POPULATED);
+ }
+ }
+}
+
+static void
+moxtet_register_devices_from_topology(struct moxtet *moxtet)
+{
+ struct moxtet_device *dev;
+ int i, ret;
+
+ for (i = 0; i < moxtet->count; ++i) {
+ dev = moxtet_alloc_device(moxtet);
+ if (!dev) {
+ dev_err(moxtet->dev, "Moxtet device %u alloc error\n",
+ i);
+ continue;
+ }
+
+ dev->idx = i;
+ dev->id = moxtet->modules[i];
+
+ ret = moxtet_add_device(dev);
+ if (ret && ret != -EBUSY) {
+ put_device(&dev->dev);
+ dev_err(moxtet->dev,
+ "Moxtet device %u register error: %i\n", i,
+ ret);
+ }
+ }
+}
+
+/*
+ * @nsame: how many modules with same id are already in moxtet->modules
+ */
+static int moxtet_set_irq(struct moxtet *moxtet, int idx, int id, int nsame)
+{
+ int i, first;
+ struct moxtet_irqpos *pos;
+
+ first = mox_module_table[id].hwirq_base +
+ nsame * mox_module_table[id].nirqs;
+
+ if (first + mox_module_table[id].nirqs > MOXTET_NIRQS)
+ return -EINVAL;
+
+ for (i = 0; i < mox_module_table[id].nirqs; ++i) {
+ pos = &moxtet->irq.position[first + i];
+ pos->idx = idx;
+ pos->bit = i;
+ moxtet->irq.exists |= BIT(first + i);
+ }
+
+ return 0;
+}
+
+static int moxtet_find_topology(struct moxtet *moxtet)
+{
+ u8 buf[TURRIS_MOX_MAX_MODULES];
+ int cnts[TURRIS_MOX_MODULE_LAST];
+ int i, ret;
+
+ memset(cnts, 0, sizeof(cnts));
+
+ ret = spi_read(to_spi_device(moxtet->dev), buf, TURRIS_MOX_MAX_MODULES);
+ if (ret < 0)
+ return ret;
+
+ if (buf[0] == TURRIS_MOX_CPU_ID_EMMC) {
+ dev_info(moxtet->dev, "Found MOX A (eMMC CPU) module\n");
+ } else if (buf[0] == TURRIS_MOX_CPU_ID_SD) {
+ dev_info(moxtet->dev, "Found MOX A (CPU) module\n");
+ } else {
+ dev_err(moxtet->dev, "Invalid Turris MOX A CPU module 0x%02x\n",
+ buf[0]);
+ return -ENODEV;
+ }
+
+ moxtet->count = 0;
+
+ for (i = 1; i < TURRIS_MOX_MAX_MODULES; ++i) {
+ int id;
+
+ if (buf[i] == 0xff)
+ break;
+
+ id = buf[i] & 0xf;
+
+ moxtet->modules[i-1] = id;
+ ++moxtet->count;
+
+ if (mox_module_known(id)) {
+ dev_info(moxtet->dev, "Found %s module\n",
+ mox_module_table[id].desc);
+
+ if (moxtet_set_irq(moxtet, i-1, id, cnts[id]++) < 0)
+ dev_err(moxtet->dev,
+ " Cannot set IRQ for module %s\n",
+ mox_module_table[id].desc);
+ } else {
+ dev_warn(moxtet->dev,
+ "Unknown Moxtet module found (ID 0x%02x)\n",
+ id);
+ }
+ }
+
+ return 0;
+}
+
+static int moxtet_spi_read(struct moxtet *moxtet, u8 *buf)
+{
+ struct spi_transfer xfer = {
+ .rx_buf = buf,
+ .tx_buf = moxtet->tx,
+ .len = moxtet->count + 1
+ };
+ int ret;
+
+ mutex_lock(&moxtet->lock);
+
+ ret = spi_sync_transfer(to_spi_device(moxtet->dev), &xfer, 1);
+
+ mutex_unlock(&moxtet->lock);
+
+ return ret;
+}
+
+int moxtet_device_read(struct device *dev)
+{
+ struct moxtet_device *mdev = to_moxtet_device(dev);
+ struct moxtet *moxtet = mdev->moxtet;
+ u8 buf[TURRIS_MOX_MAX_MODULES];
+ int ret;
+
+ if (mdev->idx >= moxtet->count)
+ return -EINVAL;
+
+ ret = moxtet_spi_read(moxtet, buf);
+ if (ret < 0)
+ return ret;
+
+ return buf[mdev->idx + 1] >> 4;
+}
+EXPORT_SYMBOL_GPL(moxtet_device_read);
+
+int moxtet_device_write(struct device *dev, u8 val)
+{
+ struct moxtet_device *mdev = to_moxtet_device(dev);
+ struct moxtet *moxtet = mdev->moxtet;
+ int ret;
+
+ if (mdev->idx >= moxtet->count)
+ return -EINVAL;
+
+ mutex_lock(&moxtet->lock);
+
+ moxtet->tx[moxtet->count - mdev->idx] = val;
+
+ ret = spi_write(to_spi_device(moxtet->dev), moxtet->tx,
+ moxtet->count + 1);
+
+ mutex_unlock(&moxtet->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(moxtet_device_write);
+
+int moxtet_device_written(struct device *dev)
+{
+ struct moxtet_device *mdev = to_moxtet_device(dev);
+ struct moxtet *moxtet = mdev->moxtet;
+
+ if (mdev->idx >= moxtet->count)
+ return -EINVAL;
+
+ return moxtet->tx[moxtet->count - mdev->idx];
+}
+EXPORT_SYMBOL_GPL(moxtet_device_written);
+
+#ifdef CONFIG_DEBUG_FS
+static int moxtet_debug_open(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+
+ return nonseekable_open(inode, file);
+}
+
+static ssize_t input_read(struct file *file, char __user *buf, size_t len,
+ loff_t *ppos)
+{
+ struct moxtet *moxtet = file->private_data;
+ u8 bin[TURRIS_MOX_MAX_MODULES];
+ u8 hex[sizeof(buf) * 2 + 1];
+ int ret, n;
+
+ ret = moxtet_spi_read(moxtet, bin);
+ if (ret < 0)
+ return ret;
+
+ n = moxtet->count + 1;
+ bin2hex(hex, bin, n);
+
+ hex[2*n] = '\n';
+
+ return simple_read_from_buffer(buf, len, ppos, hex, 2*n + 1);
+}
+
+static const struct file_operations input_fops = {
+ .owner = THIS_MODULE,
+ .open = moxtet_debug_open,
+ .read = input_read,
+ .llseek = no_llseek,
+};
+
+static ssize_t output_read(struct file *file, char __user *buf, size_t len,
+ loff_t *ppos)
+{
+ struct moxtet *moxtet = file->private_data;
+ u8 hex[TURRIS_MOX_MAX_MODULES * 2 + 1];
+ u8 *p = hex;
+ int i;
+
+ mutex_lock(&moxtet->lock);
+
+ for (i = 0; i < moxtet->count; ++i)
+ p = hex_byte_pack(p, moxtet->tx[moxtet->count - i]);
+
+ mutex_unlock(&moxtet->lock);
+
+ *p++ = '\n';
+
+ return simple_read_from_buffer(buf, len, ppos, hex, p - hex);
+}
+
+static ssize_t output_write(struct file *file, const char __user *buf,
+ size_t len, loff_t *ppos)
+{
+ struct moxtet *moxtet = file->private_data;
+ u8 bin[TURRIS_MOX_MAX_MODULES];
+ u8 hex[sizeof(bin) * 2 + 1];
+ ssize_t res;
+ loff_t dummy = 0;
+ int err, i;
+
+ if (len > 2 * moxtet->count + 1 || len < 2 * moxtet->count)
+ return -EINVAL;
+
+ res = simple_write_to_buffer(hex, sizeof(hex), &dummy, buf, len);
+ if (res < 0)
+ return res;
+
+ if (len % 2 == 1 && hex[len - 1] != '\n')
+ return -EINVAL;
+
+ err = hex2bin(bin, hex, moxtet->count);
+ if (err < 0)
+ return -EINVAL;
+
+ mutex_lock(&moxtet->lock);
+
+ for (i = 0; i < moxtet->count; ++i)
+ moxtet->tx[moxtet->count - i] = bin[i];
+
+ err = spi_write(to_spi_device(moxtet->dev), moxtet->tx,
+ moxtet->count + 1);
+
+ mutex_unlock(&moxtet->lock);
+
+ return err < 0 ? err : len;
+}
+
+static const struct file_operations output_fops = {
+ .owner = THIS_MODULE,
+ .open = moxtet_debug_open,
+ .read = output_read,
+ .write = output_write,
+ .llseek = no_llseek,
+};
+
+static int moxtet_register_debugfs(struct moxtet *moxtet)
+{
+ struct dentry *root, *entry;
+
+ root = debugfs_create_dir("moxtet", NULL);
+
+ if (IS_ERR(root))
+ return PTR_ERR(root);
+
+ entry = debugfs_create_file_unsafe("input", 0444, root, moxtet,
+ &input_fops);
+ if (IS_ERR(entry))
+ goto err_remove;
+
+ entry = debugfs_create_file_unsafe("output", 0644, root, moxtet,
+ &output_fops);
+ if (IS_ERR(entry))
+ goto err_remove;
+
+ moxtet->debugfs_root = root;
+
+ return 0;
+err_remove:
+ debugfs_remove_recursive(root);
+ return PTR_ERR(entry);
+}
+
+static void moxtet_unregister_debugfs(struct moxtet *moxtet)
+{
+ debugfs_remove_recursive(moxtet->debugfs_root);
+}
+#else
+static inline int moxtet_register_debugfs(struct moxtet *moxtet)
+{
+ return 0;
+}
+
+static inline void moxtet_unregister_debugfs(struct moxtet *moxtet)
+{
+}
+#endif
+
+static int moxtet_irq_domain_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hw)
+{
+ struct moxtet *moxtet = d->host_data;
+
+ if (hw >= MOXTET_NIRQS || !(moxtet->irq.exists & BIT(hw))) {
+ dev_err(moxtet->dev, "Invalid hw irq number\n");
+ return -EINVAL;
+ }
+
+ irq_set_chip_data(irq, d->host_data);
+ irq_set_chip_and_handler(irq, &moxtet->irq.chip, handle_level_irq);
+
+ return 0;
+}
+
+static int moxtet_irq_domain_xlate(struct irq_domain *d,
+ struct device_node *ctrlr,
+ const u32 *intspec, unsigned int intsize,
+ unsigned long *out_hwirq,
+ unsigned int *out_type)
+{
+ struct moxtet *moxtet = d->host_data;
+ int irq;
+
+ if (WARN_ON(intsize < 1))
+ return -EINVAL;
+
+ irq = intspec[0];
+
+ if (irq >= MOXTET_NIRQS || !(moxtet->irq.exists & BIT(irq)))
+ return -EINVAL;
+
+ *out_hwirq = irq;
+ *out_type = IRQ_TYPE_NONE;
+ return 0;
+}
+
+static const struct irq_domain_ops moxtet_irq_domain = {
+ .map = moxtet_irq_domain_map,
+ .xlate = moxtet_irq_domain_xlate,
+};
+
+static void moxtet_irq_mask(struct irq_data *d)
+{
+ struct moxtet *moxtet = irq_data_get_irq_chip_data(d);
+
+ moxtet->irq.masked |= BIT(d->hwirq);
+}
+
+static void moxtet_irq_unmask(struct irq_data *d)
+{
+ struct moxtet *moxtet = irq_data_get_irq_chip_data(d);
+
+ moxtet->irq.masked &= ~BIT(d->hwirq);
+}
+
+static void moxtet_irq_print_chip(struct irq_data *d, struct seq_file *p)
+{
+ struct moxtet *moxtet = irq_data_get_irq_chip_data(d);
+ struct moxtet_irqpos *pos = &moxtet->irq.position[d->hwirq];
+ int id;
+
+ id = moxtet->modules[pos->idx];
+
+ seq_printf(p, " moxtet-%s.%i#%i", mox_module_name(id), pos->idx,
+ pos->bit);
+}
+
+static const struct irq_chip moxtet_irq_chip = {
+ .name = "moxtet",
+ .irq_mask = moxtet_irq_mask,
+ .irq_unmask = moxtet_irq_unmask,
+ .irq_print_chip = moxtet_irq_print_chip,
+};
+
+static int moxtet_irq_read(struct moxtet *moxtet, unsigned long *map)
+{
+ struct moxtet_irqpos *pos = moxtet->irq.position;
+ u8 buf[TURRIS_MOX_MAX_MODULES];
+ int i, ret;
+
+ ret = moxtet_spi_read(moxtet, buf);
+ if (ret < 0)
+ return ret;
+
+ *map = 0;
+
+ for_each_set_bit(i, &moxtet->irq.exists, MOXTET_NIRQS) {
+ if (!(buf[pos[i].idx + 1] & BIT(4 + pos[i].bit)))
+ set_bit(i, map);
+ }
+
+ return 0;
+}
+
+static irqreturn_t moxtet_irq_thread_fn(int irq, void *data)
+{
+ struct moxtet *moxtet = data;
+ unsigned long set;
+ int nhandled = 0, i, sub_irq, ret;
+
+ ret = moxtet_irq_read(moxtet, &set);
+ if (ret < 0)
+ goto out;
+
+ set &= ~moxtet->irq.masked;
+
+ do {
+ for_each_set_bit(i, &set, MOXTET_NIRQS) {
+ sub_irq = irq_find_mapping(moxtet->irq.domain, i);
+ handle_nested_irq(sub_irq);
+ dev_dbg(moxtet->dev, "%i irq\n", i);
+ ++nhandled;
+ }
+
+ ret = moxtet_irq_read(moxtet, &set);
+ if (ret < 0)
+ goto out;
+
+ set &= ~moxtet->irq.masked;
+ } while (set);
+
+out:
+ return (nhandled > 0 ? IRQ_HANDLED : IRQ_NONE);
+}
+
+static void moxtet_irq_free(struct moxtet *moxtet)
+{
+ int i, irq;
+
+ for (i = 0; i < MOXTET_NIRQS; ++i) {
+ if (moxtet->irq.exists & BIT(i)) {
+ irq = irq_find_mapping(moxtet->irq.domain, i);
+ irq_dispose_mapping(irq);
+ }
+ }
+
+ irq_domain_remove(moxtet->irq.domain);
+}
+
+static int moxtet_irq_setup(struct moxtet *moxtet)
+{
+ int i, ret;
+
+ moxtet->irq.domain = irq_domain_add_simple(moxtet->dev->of_node,
+ MOXTET_NIRQS, 0,
+ &moxtet_irq_domain, moxtet);
+ if (moxtet->irq.domain == NULL) {
+ dev_err(moxtet->dev, "Could not add IRQ domain\n");
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < MOXTET_NIRQS; ++i)
+ if (moxtet->irq.exists & BIT(i))
+ irq_create_mapping(moxtet->irq.domain, i);
+
+ moxtet->irq.chip = moxtet_irq_chip;
+ moxtet->irq.masked = ~0;
+
+ ret = request_threaded_irq(moxtet->dev_irq, NULL, moxtet_irq_thread_fn,
+ IRQF_ONESHOT, "moxtet", moxtet);
+ if (ret < 0)
+ goto err_free;
+
+ return 0;
+
+err_free:
+ moxtet_irq_free(moxtet);
+ return ret;
+}
+
+static int moxtet_probe(struct spi_device *spi)
+{
+ struct moxtet *moxtet;
+ int ret;
+
+ ret = spi_setup(spi);
+ if (ret < 0)
+ return ret;
+
+ moxtet = devm_kzalloc(&spi->dev, sizeof(struct moxtet),
+ GFP_KERNEL);
+ if (!moxtet)
+ return -ENOMEM;
+
+ moxtet->dev = &spi->dev;
+ spi_set_drvdata(spi, moxtet);
+
+ mutex_init(&moxtet->lock);
+
+ moxtet->dev_irq = of_irq_get(moxtet->dev->of_node, 0);
+ if (moxtet->dev_irq == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ if (moxtet->dev_irq <= 0) {
+ dev_err(moxtet->dev, "No IRQ resource found\n");
+ return -ENXIO;
+ }
+
+ ret = moxtet_find_topology(moxtet);
+ if (ret < 0)
+ return ret;
+
+ if (moxtet->irq.exists) {
+ ret = moxtet_irq_setup(moxtet);
+ if (ret < 0)
+ return ret;
+ }
+
+ of_register_moxtet_devices(moxtet);
+ moxtet_register_devices_from_topology(moxtet);
+
+ ret = moxtet_register_debugfs(moxtet);
+ if (ret < 0)
+ dev_warn(moxtet->dev, "Failed creating debugfs entries: %i\n",
+ ret);
+
+ return 0;
+}
+
+static int moxtet_remove(struct spi_device *spi)
+{
+ struct moxtet *moxtet = spi_get_drvdata(spi);
+
+ free_irq(moxtet->dev_irq, moxtet);
+
+ moxtet_irq_free(moxtet);
+
+ moxtet_unregister_debugfs(moxtet);
+
+ device_for_each_child(moxtet->dev, NULL, __unregister);
+
+ mutex_destroy(&moxtet->lock);
+
+ return 0;
+}
+
+static const struct of_device_id moxtet_dt_ids[] = {
+ { .compatible = "cznic,moxtet" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, moxtet_dt_ids);
+
+static struct spi_driver moxtet_spi_driver = {
+ .driver = {
+ .name = "moxtet",
+ .of_match_table = moxtet_dt_ids,
+ },
+ .probe = moxtet_probe,
+ .remove = moxtet_remove,
+};
+
+static int __init moxtet_init(void)
+{
+ int ret;
+
+ ret = bus_register(&moxtet_bus_type);
+ if (ret < 0) {
+ pr_err("moxtet bus registration failed: %d\n", ret);
+ goto error;
+ }
+
+ ret = spi_register_driver(&moxtet_spi_driver);
+ if (ret < 0) {
+ pr_err("moxtet spi driver registration failed: %d\n", ret);
+ goto error_bus;
+ }
+
+ return 0;
+
+error_bus:
+ bus_unregister(&moxtet_bus_type);
+error:
+ return ret;
+}
+postcore_initcall_sync(moxtet_init);
+
+static void __exit moxtet_exit(void)
+{
+ spi_unregister_driver(&moxtet_spi_driver);
+ bus_unregister(&moxtet_bus_type);
+}
+module_exit(moxtet_exit);
+
+MODULE_AUTHOR("Marek Behun <marek.behun@nic.cz>");
+MODULE_DESCRIPTION("CZ.NIC's Turris Mox module configuration bus");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/bus/sunxi-rsb.c b/drivers/bus/sunxi-rsb.c
index 1b76d9585902..be79d6c6a4e4 100644
--- a/drivers/bus/sunxi-rsb.c
+++ b/drivers/bus/sunxi-rsb.c
@@ -651,10 +651,8 @@ static int sunxi_rsb_probe(struct platform_device *pdev)
return PTR_ERR(rsb->regs);
irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- dev_err(dev, "failed to retrieve irq: %d\n", irq);
+ if (irq < 0)
return irq;
- }
rsb->clk = devm_clk_get(dev, NULL);
if (IS_ERR(rsb->clk)) {
diff --git a/drivers/bus/uniphier-system-bus.c b/drivers/bus/uniphier-system-bus.c
index e845c1a93f21..f70dedace20b 100644
--- a/drivers/bus/uniphier-system-bus.c
+++ b/drivers/bus/uniphier-system-bus.c
@@ -176,7 +176,6 @@ static int uniphier_system_bus_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct uniphier_system_bus_priv *priv;
- struct resource *regs;
const __be32 *ranges;
u32 cells, addr, size;
u64 paddr;
@@ -186,8 +185,7 @@ static int uniphier_system_bus_probe(struct platform_device *pdev)
if (!priv)
return -ENOMEM;
- regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- priv->membase = devm_ioremap_resource(dev, regs);
+ priv->membase = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(priv->membase))
return PTR_ERR(priv->membase);
diff --git a/drivers/clk/clk-scmi.c b/drivers/clk/clk-scmi.c
index a2287c770d5c..886f7c5df51a 100644
--- a/drivers/clk/clk-scmi.c
+++ b/drivers/clk/clk-scmi.c
@@ -69,7 +69,7 @@ static int scmi_clk_set_rate(struct clk_hw *hw, unsigned long rate,
{
struct scmi_clk *clk = to_scmi_clk(hw);
- return clk->handle->clk_ops->rate_set(clk->handle, clk->id, 0, rate);
+ return clk->handle->clk_ops->rate_set(clk->handle, clk->id, rate);
}
static int scmi_clk_enable(struct clk_hw *hw)
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index ba8d3d0ef32c..c9a827bffe1c 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -271,6 +271,20 @@ config TRUSTED_FOUNDATIONS
Choose N if you don't know what this is about.
+config TURRIS_MOX_RWTM
+ tristate "Turris Mox rWTM secure firmware driver"
+ depends on ARCH_MVEBU || COMPILE_TEST
+ depends on HAS_DMA && OF
+ depends on MAILBOX
+ select HW_RANDOM
+ select ARMADA_37XX_RWTM_MBOX
+ help
+ This driver communicates with the firmware on the Cortex-M3 secure
+ processor of the Turris Mox router. Enable if you are building for
+ Turris Mox, and you will be able to read the device serial number and
+ other manufacturing data and also utilize the Entropy Bit Generator
+ for hardware random number generation.
+
config HAVE_ARM_SMCCC
bool
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 3fa0b34eb72f..2b6e3a0be595 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_QCOM_SCM_32) += qcom_scm-32.o
CFLAGS_qcom_scm-32.o :=$(call as-instr,.arch armv7-a\n.arch_extension sec,-DREQUIRES_SEC=1) -march=armv7-a
obj-$(CONFIG_TI_SCI_PROTOCOL) += ti_sci.o
obj-$(CONFIG_TRUSTED_FOUNDATIONS) += trusted_foundations.o
+obj-$(CONFIG_TURRIS_MOX_RWTM) += turris-mox-rwtm.o
obj-$(CONFIG_ARM_SCMI_PROTOCOL) += arm_scmi/
obj-y += psci/
diff --git a/drivers/firmware/arm_scmi/Makefile b/drivers/firmware/arm_scmi/Makefile
index c47d28d556b6..5f298f00a82e 100644
--- a/drivers/firmware/arm_scmi/Makefile
+++ b/drivers/firmware/arm_scmi/Makefile
@@ -2,5 +2,5 @@
obj-y = scmi-bus.o scmi-driver.o scmi-protocols.o
scmi-bus-y = bus.o
scmi-driver-y = driver.o
-scmi-protocols-y = base.o clock.o perf.o power.o sensors.o
+scmi-protocols-y = base.o clock.o perf.o power.o reset.o sensors.o
obj-$(CONFIG_ARM_SCMI_POWER_DOMAIN) += scmi_pm_domain.o
diff --git a/drivers/firmware/arm_scmi/base.c b/drivers/firmware/arm_scmi/base.c
index 204390297f4b..f804e8af6521 100644
--- a/drivers/firmware/arm_scmi/base.c
+++ b/drivers/firmware/arm_scmi/base.c
@@ -204,7 +204,7 @@ static int scmi_base_discover_agent_get(const struct scmi_handle *handle,
if (ret)
return ret;
- *(__le32 *)t->tx.buf = cpu_to_le32(id);
+ put_unaligned_le32(id, t->tx.buf);
ret = scmi_do_xfer(handle, t);
if (!ret)
diff --git a/drivers/firmware/arm_scmi/clock.c b/drivers/firmware/arm_scmi/clock.c
index 0a194af92438..32526a793f3a 100644
--- a/drivers/firmware/arm_scmi/clock.c
+++ b/drivers/firmware/arm_scmi/clock.c
@@ -56,7 +56,7 @@ struct scmi_msg_resp_clock_describe_rates {
struct scmi_clock_set_rate {
__le32 flags;
#define CLOCK_SET_ASYNC BIT(0)
-#define CLOCK_SET_DELAYED BIT(1)
+#define CLOCK_SET_IGNORE_RESP BIT(1)
#define CLOCK_SET_ROUND_UP BIT(2)
#define CLOCK_SET_ROUND_AUTO BIT(3)
__le32 id;
@@ -67,6 +67,7 @@ struct scmi_clock_set_rate {
struct clock_info {
int num_clocks;
int max_async_req;
+ atomic_t cur_async_req;
struct scmi_clock_info *clk;
};
@@ -106,7 +107,7 @@ static int scmi_clock_attributes_get(const struct scmi_handle *handle,
if (ret)
return ret;
- *(__le32 *)t->tx.buf = cpu_to_le32(clk_id);
+ put_unaligned_le32(clk_id, t->tx.buf);
attr = t->rx.buf;
ret = scmi_do_xfer(handle, t);
@@ -203,39 +204,47 @@ scmi_clock_rate_get(const struct scmi_handle *handle, u32 clk_id, u64 *value)
if (ret)
return ret;
- *(__le32 *)t->tx.buf = cpu_to_le32(clk_id);
+ put_unaligned_le32(clk_id, t->tx.buf);
ret = scmi_do_xfer(handle, t);
- if (!ret) {
- __le32 *pval = t->rx.buf;
-
- *value = le32_to_cpu(*pval);
- *value |= (u64)le32_to_cpu(*(pval + 1)) << 32;
- }
+ if (!ret)
+ *value = get_unaligned_le64(t->rx.buf);
scmi_xfer_put(handle, t);
return ret;
}
static int scmi_clock_rate_set(const struct scmi_handle *handle, u32 clk_id,
- u32 config, u64 rate)
+ u64 rate)
{
int ret;
+ u32 flags = 0;
struct scmi_xfer *t;
struct scmi_clock_set_rate *cfg;
+ struct clock_info *ci = handle->clk_priv;
ret = scmi_xfer_get_init(handle, CLOCK_RATE_SET, SCMI_PROTOCOL_CLOCK,
sizeof(*cfg), 0, &t);
if (ret)
return ret;
+ if (ci->max_async_req &&
+ atomic_inc_return(&ci->cur_async_req) < ci->max_async_req)
+ flags |= CLOCK_SET_ASYNC;
+
cfg = t->tx.buf;
- cfg->flags = cpu_to_le32(config);
+ cfg->flags = cpu_to_le32(flags);
cfg->id = cpu_to_le32(clk_id);
cfg->value_low = cpu_to_le32(rate & 0xffffffff);
cfg->value_high = cpu_to_le32(rate >> 32);
- ret = scmi_do_xfer(handle, t);
+ if (flags & CLOCK_SET_ASYNC)
+ ret = scmi_do_xfer_with_response(handle, t);
+ else
+ ret = scmi_do_xfer(handle, t);
+
+ if (ci->max_async_req)
+ atomic_dec(&ci->cur_async_req);
scmi_xfer_put(handle, t);
return ret;
diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
index 44fd4f9404a9..5237c2ff79fe 100644
--- a/drivers/firmware/arm_scmi/common.h
+++ b/drivers/firmware/arm_scmi/common.h
@@ -15,6 +15,8 @@
#include <linux/scmi_protocol.h>
#include <linux/types.h>
+#include <asm/unaligned.h>
+
#define PROTOCOL_REV_MINOR_MASK GENMASK(15, 0)
#define PROTOCOL_REV_MAJOR_MASK GENMASK(31, 16)
#define PROTOCOL_REV_MAJOR(x) (u16)(FIELD_GET(PROTOCOL_REV_MAJOR_MASK, (x)))
@@ -48,11 +50,11 @@ struct scmi_msg_resp_prot_version {
/**
* struct scmi_msg_hdr - Message(Tx/Rx) header
*
- * @id: The identifier of the command being sent
- * @protocol_id: The identifier of the protocol used to send @id command
- * @seq: The token to identify the message. when a message/command returns,
- * the platform returns the whole message header unmodified including
- * the token
+ * @id: The identifier of the message being sent
+ * @protocol_id: The identifier of the protocol used to send @id message
+ * @seq: The token to identify the message. When a message returns, the
+ * platform returns the whole message header unmodified including the
+ * token
* @status: Status of the transfer once it's complete
* @poll_completion: Indicate if the transfer needs to be polled for
* completion or interrupt mode is used
@@ -84,17 +86,21 @@ struct scmi_msg {
* @rx: Receive message, the buffer should be pre-allocated to store
* message. If request-ACK protocol is used, we can reuse the same
* buffer for the rx path as we use for the tx path.
- * @done: completion event
+ * @done: command message transmit completion event
+ * @async: pointer to delayed response message received event completion
*/
struct scmi_xfer {
struct scmi_msg_hdr hdr;
struct scmi_msg tx;
struct scmi_msg rx;
struct completion done;
+ struct completion *async_done;
};
void scmi_xfer_put(const struct scmi_handle *h, struct scmi_xfer *xfer);
int scmi_do_xfer(const struct scmi_handle *h, struct scmi_xfer *xfer);
+int scmi_do_xfer_with_response(const struct scmi_handle *h,
+ struct scmi_xfer *xfer);
int scmi_xfer_get_init(const struct scmi_handle *h, u8 msg_id, u8 prot_id,
size_t tx_size, size_t rx_size, struct scmi_xfer **p);
int scmi_handle_put(const struct scmi_handle *handle);
diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index b5bc4c7a8fab..3eb0382491ce 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -30,8 +30,14 @@
#include "common.h"
#define MSG_ID_MASK GENMASK(7, 0)
+#define MSG_XTRACT_ID(hdr) FIELD_GET(MSG_ID_MASK, (hdr))
#define MSG_TYPE_MASK GENMASK(9, 8)
+#define MSG_XTRACT_TYPE(hdr) FIELD_GET(MSG_TYPE_MASK, (hdr))
+#define MSG_TYPE_COMMAND 0
+#define MSG_TYPE_DELAYED_RESP 2
+#define MSG_TYPE_NOTIFICATION 3
#define MSG_PROTOCOL_ID_MASK GENMASK(17, 10)
+#define MSG_XTRACT_PROT_ID(hdr) FIELD_GET(MSG_PROTOCOL_ID_MASK, (hdr))
#define MSG_TOKEN_ID_MASK GENMASK(27, 18)
#define MSG_XTRACT_TOKEN(hdr) FIELD_GET(MSG_TOKEN_ID_MASK, (hdr))
#define MSG_TOKEN_MAX (MSG_XTRACT_TOKEN(MSG_TOKEN_ID_MASK) + 1)
@@ -86,7 +92,7 @@ struct scmi_desc {
};
/**
- * struct scmi_chan_info - Structure representing a SCMI channel informfation
+ * struct scmi_chan_info - Structure representing a SCMI channel information
*
* @cl: Mailbox Client
* @chan: Transmit/Receive mailbox channel
@@ -111,8 +117,9 @@ struct scmi_chan_info {
* @handle: Instance of SCMI handle to send to clients
* @version: SCMI revision information containing protocol version,
* implementation version and (sub-)vendor identification.
- * @minfo: Message info
- * @tx_idr: IDR object to map protocol id to channel info pointer
+ * @tx_minfo: Universal Transmit Message management info
+ * @tx_idr: IDR object to map protocol id to Tx channel info pointer
+ * @rx_idr: IDR object to map protocol id to Rx channel info pointer
* @protocols_imp: List of protocols implemented, currently maximum of
* MAX_PROTOCOLS_IMP elements allocated by the base protocol
* @node: List head
@@ -123,8 +130,9 @@ struct scmi_info {
const struct scmi_desc *desc;
struct scmi_revision_info version;
struct scmi_handle handle;
- struct scmi_xfers_info minfo;
+ struct scmi_xfers_info tx_minfo;
struct idr tx_idr;
+ struct idr rx_idr;
u8 *protocols_imp;
struct list_head node;
int users;
@@ -182,7 +190,7 @@ static inline int scmi_to_linux_errno(int errno)
static inline void scmi_dump_header_dbg(struct device *dev,
struct scmi_msg_hdr *hdr)
{
- dev_dbg(dev, "Command ID: %x Sequence ID: %x Protocol: %x\n",
+ dev_dbg(dev, "Message ID: %x Sequence ID: %x Protocol: %x\n",
hdr->id, hdr->seq, hdr->protocol_id);
}
@@ -190,7 +198,7 @@ static void scmi_fetch_response(struct scmi_xfer *xfer,
struct scmi_shared_mem __iomem *mem)
{
xfer->hdr.status = ioread32(mem->msg_payload);
- /* Skip the length of header and statues in payload area i.e 8 bytes*/
+ /* Skip the length of header and status in payload area i.e 8 bytes */
xfer->rx.len = min_t(size_t, xfer->rx.len, ioread32(&mem->length) - 8);
/* Take a copy to the rx buffer.. */
@@ -198,56 +206,12 @@ static void scmi_fetch_response(struct scmi_xfer *xfer,
}
/**
- * scmi_rx_callback() - mailbox client callback for receive messages
- *
- * @cl: client pointer
- * @m: mailbox message
- *
- * Processes one received message to appropriate transfer information and
- * signals completion of the transfer.
- *
- * NOTE: This function will be invoked in IRQ context, hence should be
- * as optimal as possible.
- */
-static void scmi_rx_callback(struct mbox_client *cl, void *m)
-{
- u16 xfer_id;
- struct scmi_xfer *xfer;
- struct scmi_chan_info *cinfo = client_to_scmi_chan_info(cl);
- struct device *dev = cinfo->dev;
- struct scmi_info *info = handle_to_scmi_info(cinfo->handle);
- struct scmi_xfers_info *minfo = &info->minfo;
- struct scmi_shared_mem __iomem *mem = cinfo->payload;
-
- xfer_id = MSG_XTRACT_TOKEN(ioread32(&mem->msg_header));
-
- /* Are we even expecting this? */
- if (!test_bit(xfer_id, minfo->xfer_alloc_table)) {
- dev_err(dev, "message for %d is not expected!\n", xfer_id);
- return;
- }
-
- xfer = &minfo->xfer_block[xfer_id];
-
- scmi_dump_header_dbg(dev, &xfer->hdr);
- /* Is the message of valid length? */
- if (xfer->rx.len > info->desc->max_msg_size) {
- dev_err(dev, "unable to handle %zu xfer(max %d)\n",
- xfer->rx.len, info->desc->max_msg_size);
- return;
- }
-
- scmi_fetch_response(xfer, mem);
- complete(&xfer->done);
-}
-
-/**
* pack_scmi_header() - packs and returns 32-bit header
*
* @hdr: pointer to header containing all the information on message id,
* protocol id and sequence id.
*
- * Return: 32-bit packed command header to be sent to the platform.
+ * Return: 32-bit packed message header to be sent to the platform.
*/
static inline u32 pack_scmi_header(struct scmi_msg_hdr *hdr)
{
@@ -257,6 +221,18 @@ static inline u32 pack_scmi_header(struct scmi_msg_hdr *hdr)
}
/**
+ * unpack_scmi_header() - unpacks and records message and protocol id
+ *
+ * @msg_hdr: 32-bit packed message header sent from the platform
+ * @hdr: pointer to header to fetch message and protocol id.
+ */
+static inline void unpack_scmi_header(u32 msg_hdr, struct scmi_msg_hdr *hdr)
+{
+ hdr->id = MSG_XTRACT_ID(msg_hdr);
+ hdr->protocol_id = MSG_XTRACT_PROT_ID(msg_hdr);
+}
+
+/**
* scmi_tx_prepare() - mailbox client callback to prepare for the transfer
*
* @cl: client pointer
@@ -271,6 +247,14 @@ static void scmi_tx_prepare(struct mbox_client *cl, void *m)
struct scmi_chan_info *cinfo = client_to_scmi_chan_info(cl);
struct scmi_shared_mem __iomem *mem = cinfo->payload;
+ /*
+ * Ideally channel must be free by now unless OS timeout last
+ * request and platform continued to process the same, wait
+ * until it releases the shared memory, otherwise we may endup
+ * overwriting its response with new message payload or vice-versa
+ */
+ spin_until_cond(ioread32(&mem->channel_status) &
+ SCMI_SHMEM_CHAN_STAT_CHANNEL_FREE);
/* Mark channel busy + clear error */
iowrite32(0x0, &mem->channel_status);
iowrite32(t->hdr.poll_completion ? 0 : SCMI_SHMEM_FLAG_INTR_ENABLED,
@@ -285,8 +269,9 @@ static void scmi_tx_prepare(struct mbox_client *cl, void *m)
* scmi_xfer_get() - Allocate one message
*
* @handle: Pointer to SCMI entity handle
+ * @minfo: Pointer to Tx/Rx Message management info based on channel type
*
- * Helper function which is used by various command functions that are
+ * Helper function which is used by various message functions that are
* exposed to clients of this driver for allocating a message traffic event.
*
* This function can sleep depending on pending requests already in the system
@@ -295,13 +280,13 @@ static void scmi_tx_prepare(struct mbox_client *cl, void *m)
*
* Return: 0 if all went fine, else corresponding error.
*/
-static struct scmi_xfer *scmi_xfer_get(const struct scmi_handle *handle)
+static struct scmi_xfer *scmi_xfer_get(const struct scmi_handle *handle,
+ struct scmi_xfers_info *minfo)
{
u16 xfer_id;
struct scmi_xfer *xfer;
unsigned long flags, bit_pos;
struct scmi_info *info = handle_to_scmi_info(handle);
- struct scmi_xfers_info *minfo = &info->minfo;
/* Keep the locked section as small as possible */
spin_lock_irqsave(&minfo->xfer_lock, flags);
@@ -324,18 +309,17 @@ static struct scmi_xfer *scmi_xfer_get(const struct scmi_handle *handle)
}
/**
- * scmi_xfer_put() - Release a message
+ * __scmi_xfer_put() - Release a message
*
- * @handle: Pointer to SCMI entity handle
+ * @minfo: Pointer to Tx/Rx Message management info based on channel type
* @xfer: message that was reserved by scmi_xfer_get
*
* This holds a spinlock to maintain integrity of internal data structures.
*/
-void scmi_xfer_put(const struct scmi_handle *handle, struct scmi_xfer *xfer)
+static void
+__scmi_xfer_put(struct scmi_xfers_info *minfo, struct scmi_xfer *xfer)
{
unsigned long flags;
- struct scmi_info *info = handle_to_scmi_info(handle);
- struct scmi_xfers_info *minfo = &info->minfo;
/*
* Keep the locked section as small as possible
@@ -347,6 +331,68 @@ void scmi_xfer_put(const struct scmi_handle *handle, struct scmi_xfer *xfer)
spin_unlock_irqrestore(&minfo->xfer_lock, flags);
}
+/**
+ * scmi_rx_callback() - mailbox client callback for receive messages
+ *
+ * @cl: client pointer
+ * @m: mailbox message
+ *
+ * Processes one received message to appropriate transfer information and
+ * signals completion of the transfer.
+ *
+ * NOTE: This function will be invoked in IRQ context, hence should be
+ * as optimal as possible.
+ */
+static void scmi_rx_callback(struct mbox_client *cl, void *m)
+{
+ u8 msg_type;
+ u32 msg_hdr;
+ u16 xfer_id;
+ struct scmi_xfer *xfer;
+ struct scmi_chan_info *cinfo = client_to_scmi_chan_info(cl);
+ struct device *dev = cinfo->dev;
+ struct scmi_info *info = handle_to_scmi_info(cinfo->handle);
+ struct scmi_xfers_info *minfo = &info->tx_minfo;
+ struct scmi_shared_mem __iomem *mem = cinfo->payload;
+
+ msg_hdr = ioread32(&mem->msg_header);
+ msg_type = MSG_XTRACT_TYPE(msg_hdr);
+ xfer_id = MSG_XTRACT_TOKEN(msg_hdr);
+
+ if (msg_type == MSG_TYPE_NOTIFICATION)
+ return; /* Notifications not yet supported */
+
+ /* Are we even expecting this? */
+ if (!test_bit(xfer_id, minfo->xfer_alloc_table)) {
+ dev_err(dev, "message for %d is not expected!\n", xfer_id);
+ return;
+ }
+
+ xfer = &minfo->xfer_block[xfer_id];
+
+ scmi_dump_header_dbg(dev, &xfer->hdr);
+
+ scmi_fetch_response(xfer, mem);
+
+ if (msg_type == MSG_TYPE_DELAYED_RESP)
+ complete(xfer->async_done);
+ else
+ complete(&xfer->done);
+}
+
+/**
+ * scmi_xfer_put() - Release a transmit message
+ *
+ * @handle: Pointer to SCMI entity handle
+ * @xfer: message that was reserved by scmi_xfer_get
+ */
+void scmi_xfer_put(const struct scmi_handle *handle, struct scmi_xfer *xfer)
+{
+ struct scmi_info *info = handle_to_scmi_info(handle);
+
+ __scmi_xfer_put(&info->tx_minfo, xfer);
+}
+
static bool
scmi_xfer_poll_done(const struct scmi_chan_info *cinfo, struct scmi_xfer *xfer)
{
@@ -435,8 +481,36 @@ int scmi_do_xfer(const struct scmi_handle *handle, struct scmi_xfer *xfer)
return ret;
}
+#define SCMI_MAX_RESPONSE_TIMEOUT (2 * MSEC_PER_SEC)
+
+/**
+ * scmi_do_xfer_with_response() - Do one transfer and wait until the delayed
+ * response is received
+ *
+ * @handle: Pointer to SCMI entity handle
+ * @xfer: Transfer to initiate and wait for response
+ *
+ * Return: -ETIMEDOUT in case of no delayed response, if transmit error,
+ * return corresponding error, else if all goes well, return 0.
+ */
+int scmi_do_xfer_with_response(const struct scmi_handle *handle,
+ struct scmi_xfer *xfer)
+{
+ int ret, timeout = msecs_to_jiffies(SCMI_MAX_RESPONSE_TIMEOUT);
+ DECLARE_COMPLETION_ONSTACK(async_response);
+
+ xfer->async_done = &async_response;
+
+ ret = scmi_do_xfer(handle, xfer);
+ if (!ret && !wait_for_completion_timeout(xfer->async_done, timeout))
+ ret = -ETIMEDOUT;
+
+ xfer->async_done = NULL;
+ return ret;
+}
+
/**
- * scmi_xfer_get_init() - Allocate and initialise one message
+ * scmi_xfer_get_init() - Allocate and initialise one message for transmit
*
* @handle: Pointer to SCMI entity handle
* @msg_id: Message identifier
@@ -457,6 +531,7 @@ int scmi_xfer_get_init(const struct scmi_handle *handle, u8 msg_id, u8 prot_id,
int ret;
struct scmi_xfer *xfer;
struct scmi_info *info = handle_to_scmi_info(handle);
+ struct scmi_xfers_info *minfo = &info->tx_minfo;
struct device *dev = info->dev;
/* Ensure we have sane transfer sizes */
@@ -464,7 +539,7 @@ int scmi_xfer_get_init(const struct scmi_handle *handle, u8 msg_id, u8 prot_id,
tx_size > info->desc->max_msg_size)
return -ERANGE;
- xfer = scmi_xfer_get(handle);
+ xfer = scmi_xfer_get(handle, minfo);
if (IS_ERR(xfer)) {
ret = PTR_ERR(xfer);
dev_err(dev, "failed to get free message slot(%d)\n", ret);
@@ -597,27 +672,13 @@ int scmi_handle_put(const struct scmi_handle *handle)
return 0;
}
-static const struct scmi_desc scmi_generic_desc = {
- .max_rx_timeout_ms = 30, /* We may increase this if required */
- .max_msg = 20, /* Limited by MBOX_TX_QUEUE_LEN */
- .max_msg_size = 128,
-};
-
-/* Each compatible listed below must have descriptor associated with it */
-static const struct of_device_id scmi_of_match[] = {
- { .compatible = "arm,scmi", .data = &scmi_generic_desc },
- { /* Sentinel */ },
-};
-
-MODULE_DEVICE_TABLE(of, scmi_of_match);
-
static int scmi_xfer_info_init(struct scmi_info *sinfo)
{
int i;
struct scmi_xfer *xfer;
struct device *dev = sinfo->dev;
const struct scmi_desc *desc = sinfo->desc;
- struct scmi_xfers_info *info = &sinfo->minfo;
+ struct scmi_xfers_info *info = &sinfo->tx_minfo;
/* Pre-allocated messages, no more than what hdr.seq can support */
if (WARN_ON(desc->max_msg >= MSG_TOKEN_MAX)) {
@@ -652,61 +713,32 @@ static int scmi_xfer_info_init(struct scmi_info *sinfo)
return 0;
}
-static int scmi_mailbox_check(struct device_node *np)
+static int scmi_mailbox_check(struct device_node *np, int idx)
{
- return of_parse_phandle_with_args(np, "mboxes", "#mbox-cells", 0, NULL);
+ return of_parse_phandle_with_args(np, "mboxes", "#mbox-cells",
+ idx, NULL);
}
-static int scmi_mbox_free_channel(int id, void *p, void *data)
+static int scmi_mbox_chan_setup(struct scmi_info *info, struct device *dev,
+ int prot_id, bool tx)
{
- struct scmi_chan_info *cinfo = p;
- struct idr *idr = data;
-
- if (!IS_ERR_OR_NULL(cinfo->chan)) {
- mbox_free_channel(cinfo->chan);
- cinfo->chan = NULL;
- }
-
- idr_remove(idr, id);
-
- return 0;
-}
-
-static int scmi_remove(struct platform_device *pdev)
-{
- int ret = 0;
- struct scmi_info *info = platform_get_drvdata(pdev);
- struct idr *idr = &info->tx_idr;
-
- mutex_lock(&scmi_list_mutex);
- if (info->users)
- ret = -EBUSY;
- else
- list_del(&info->node);
- mutex_unlock(&scmi_list_mutex);
-
- if (ret)
- return ret;
-
- /* Safe to free channels since no more users */
- ret = idr_for_each(idr, scmi_mbox_free_channel, idr);
- idr_destroy(&info->tx_idr);
-
- return ret;
-}
-
-static inline int
-scmi_mbox_chan_setup(struct scmi_info *info, struct device *dev, int prot_id)
-{
- int ret;
+ int ret, idx;
struct resource res;
resource_size_t size;
struct device_node *shmem, *np = dev->of_node;
struct scmi_chan_info *cinfo;
struct mbox_client *cl;
+ struct idr *idr;
+ const char *desc = tx ? "Tx" : "Rx";
- if (scmi_mailbox_check(np)) {
- cinfo = idr_find(&info->tx_idr, SCMI_PROTOCOL_BASE);
+ /* Transmit channel is first entry i.e. index 0 */
+ idx = tx ? 0 : 1;
+ idr = tx ? &info->tx_idr : &info->rx_idr;
+
+ if (scmi_mailbox_check(np, idx)) {
+ cinfo = idr_find(idr, SCMI_PROTOCOL_BASE);
+ if (unlikely(!cinfo)) /* Possible only if platform has no Rx */
+ return -EINVAL;
goto idr_alloc;
}
@@ -719,36 +751,36 @@ scmi_mbox_chan_setup(struct scmi_info *info, struct device *dev, int prot_id)
cl = &cinfo->cl;
cl->dev = dev;
cl->rx_callback = scmi_rx_callback;
- cl->tx_prepare = scmi_tx_prepare;
+ cl->tx_prepare = tx ? scmi_tx_prepare : NULL;
cl->tx_block = false;
- cl->knows_txdone = true;
+ cl->knows_txdone = tx;
- shmem = of_parse_phandle(np, "shmem", 0);
+ shmem = of_parse_phandle(np, "shmem", idx);
ret = of_address_to_resource(shmem, 0, &res);
of_node_put(shmem);
if (ret) {
- dev_err(dev, "failed to get SCMI Tx payload mem resource\n");
+ dev_err(dev, "failed to get SCMI %s payload memory\n", desc);
return ret;
}
size = resource_size(&res);
cinfo->payload = devm_ioremap(info->dev, res.start, size);
if (!cinfo->payload) {
- dev_err(dev, "failed to ioremap SCMI Tx payload\n");
+ dev_err(dev, "failed to ioremap SCMI %s payload\n", desc);
return -EADDRNOTAVAIL;
}
- /* Transmit channel is first entry i.e. index 0 */
- cinfo->chan = mbox_request_channel(cl, 0);
+ cinfo->chan = mbox_request_channel(cl, idx);
if (IS_ERR(cinfo->chan)) {
ret = PTR_ERR(cinfo->chan);
if (ret != -EPROBE_DEFER)
- dev_err(dev, "failed to request SCMI Tx mailbox\n");
+ dev_err(dev, "failed to request SCMI %s mailbox\n",
+ desc);
return ret;
}
idr_alloc:
- ret = idr_alloc(&info->tx_idr, cinfo, prot_id, prot_id + 1, GFP_KERNEL);
+ ret = idr_alloc(idr, cinfo, prot_id, prot_id + 1, GFP_KERNEL);
if (ret != prot_id) {
dev_err(dev, "unable to allocate SCMI idr slot err %d\n", ret);
return ret;
@@ -758,6 +790,17 @@ idr_alloc:
return 0;
}
+static inline int
+scmi_mbox_txrx_setup(struct scmi_info *info, struct device *dev, int prot_id)
+{
+ int ret = scmi_mbox_chan_setup(info, dev, prot_id, true);
+
+ if (!ret) /* Rx is optional, hence no error check */
+ scmi_mbox_chan_setup(info, dev, prot_id, false);
+
+ return ret;
+}
+
static inline void
scmi_create_protocol_device(struct device_node *np, struct scmi_info *info,
int prot_id)
@@ -771,7 +814,7 @@ scmi_create_protocol_device(struct device_node *np, struct scmi_info *info,
return;
}
- if (scmi_mbox_chan_setup(info, &sdev->dev, prot_id)) {
+ if (scmi_mbox_txrx_setup(info, &sdev->dev, prot_id)) {
dev_err(&sdev->dev, "failed to setup transport\n");
scmi_device_destroy(sdev);
return;
@@ -791,7 +834,7 @@ static int scmi_probe(struct platform_device *pdev)
struct device_node *child, *np = dev->of_node;
/* Only mailbox method supported, check for the presence of one */
- if (scmi_mailbox_check(np)) {
+ if (scmi_mailbox_check(np, 0)) {
dev_err(dev, "no mailbox found in %pOF\n", np);
return -EINVAL;
}
@@ -814,12 +857,13 @@ static int scmi_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, info);
idr_init(&info->tx_idr);
+ idr_init(&info->rx_idr);
handle = &info->handle;
handle->dev = info->dev;
handle->version = &info->version;
- ret = scmi_mbox_chan_setup(info, dev, SCMI_PROTOCOL_BASE);
+ ret = scmi_mbox_txrx_setup(info, dev, SCMI_PROTOCOL_BASE);
if (ret)
return ret;
@@ -854,6 +898,62 @@ static int scmi_probe(struct platform_device *pdev)
return 0;
}
+static int scmi_mbox_free_channel(int id, void *p, void *data)
+{
+ struct scmi_chan_info *cinfo = p;
+ struct idr *idr = data;
+
+ if (!IS_ERR_OR_NULL(cinfo->chan)) {
+ mbox_free_channel(cinfo->chan);
+ cinfo->chan = NULL;
+ }
+
+ idr_remove(idr, id);
+
+ return 0;
+}
+
+static int scmi_remove(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct scmi_info *info = platform_get_drvdata(pdev);
+ struct idr *idr = &info->tx_idr;
+
+ mutex_lock(&scmi_list_mutex);
+ if (info->users)
+ ret = -EBUSY;
+ else
+ list_del(&info->node);
+ mutex_unlock(&scmi_list_mutex);
+
+ if (ret)
+ return ret;
+
+ /* Safe to free channels since no more users */
+ ret = idr_for_each(idr, scmi_mbox_free_channel, idr);
+ idr_destroy(&info->tx_idr);
+
+ idr = &info->rx_idr;
+ ret = idr_for_each(idr, scmi_mbox_free_channel, idr);
+ idr_destroy(&info->rx_idr);
+
+ return ret;
+}
+
+static const struct scmi_desc scmi_generic_desc = {
+ .max_rx_timeout_ms = 30, /* We may increase this if required */
+ .max_msg = 20, /* Limited by MBOX_TX_QUEUE_LEN */
+ .max_msg_size = 128,
+};
+
+/* Each compatible listed below must have descriptor associated with it */
+static const struct of_device_id scmi_of_match[] = {
+ { .compatible = "arm,scmi", .data = &scmi_generic_desc },
+ { /* Sentinel */ },
+};
+
+MODULE_DEVICE_TABLE(of, scmi_of_match);
+
static struct platform_driver scmi_driver = {
.driver = {
.name = "arm-scmi",
diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c
index 3c8ae7cc35de..4a8012e3cb8c 100644
--- a/drivers/firmware/arm_scmi/perf.c
+++ b/drivers/firmware/arm_scmi/perf.c
@@ -5,7 +5,10 @@
* Copyright (C) 2018 ARM Ltd.
*/
+#include <linux/bits.h>
#include <linux/of.h>
+#include <linux/io.h>
+#include <linux/io-64-nonatomic-hi-lo.h>
#include <linux/platform_device.h>
#include <linux/pm_opp.h>
#include <linux/sort.h>
@@ -21,6 +24,7 @@ enum scmi_performance_protocol_cmd {
PERF_LEVEL_GET = 0x8,
PERF_NOTIFY_LIMITS = 0x9,
PERF_NOTIFY_LEVEL = 0xa,
+ PERF_DESCRIBE_FASTCHANNEL = 0xb,
};
struct scmi_opp {
@@ -44,6 +48,7 @@ struct scmi_msg_resp_perf_domain_attributes {
#define SUPPORTS_SET_PERF_LVL(x) ((x) & BIT(30))
#define SUPPORTS_PERF_LIMIT_NOTIFY(x) ((x) & BIT(29))
#define SUPPORTS_PERF_LEVEL_NOTIFY(x) ((x) & BIT(28))
+#define SUPPORTS_PERF_FASTCHANNELS(x) ((x) & BIT(27))
__le32 rate_limit_us;
__le32 sustained_freq_khz;
__le32 sustained_perf_level;
@@ -87,17 +92,56 @@ struct scmi_msg_resp_perf_describe_levels {
} opp[0];
};
+struct scmi_perf_get_fc_info {
+ __le32 domain;
+ __le32 message_id;
+};
+
+struct scmi_msg_resp_perf_desc_fc {
+ __le32 attr;
+#define SUPPORTS_DOORBELL(x) ((x) & BIT(0))
+#define DOORBELL_REG_WIDTH(x) FIELD_GET(GENMASK(2, 1), (x))
+ __le32 rate_limit;
+ __le32 chan_addr_low;
+ __le32 chan_addr_high;
+ __le32 chan_size;
+ __le32 db_addr_low;
+ __le32 db_addr_high;
+ __le32 db_set_lmask;
+ __le32 db_set_hmask;
+ __le32 db_preserve_lmask;
+ __le32 db_preserve_hmask;
+};
+
+struct scmi_fc_db_info {
+ int width;
+ u64 set;
+ u64 mask;
+ void __iomem *addr;
+};
+
+struct scmi_fc_info {
+ void __iomem *level_set_addr;
+ void __iomem *limit_set_addr;
+ void __iomem *level_get_addr;
+ void __iomem *limit_get_addr;
+ struct scmi_fc_db_info *level_set_db;
+ struct scmi_fc_db_info *limit_set_db;
+};
+
struct perf_dom_info {
bool set_limits;
bool set_perf;
bool perf_limit_notify;
bool perf_level_notify;
+ bool perf_fastchannels;
u32 opp_count;
u32 sustained_freq_khz;
u32 sustained_perf_level;
u32 mult_factor;
char name[SCMI_MAX_STR_SIZE];
struct scmi_opp opp[MAX_OPPS];
+ struct scmi_fc_info *fc_info;
};
struct scmi_perf_info {
@@ -151,7 +195,7 @@ scmi_perf_domain_attributes_get(const struct scmi_handle *handle, u32 domain,
if (ret)
return ret;
- *(__le32 *)t->tx.buf = cpu_to_le32(domain);
+ put_unaligned_le32(domain, t->tx.buf);
attr = t->rx.buf;
ret = scmi_do_xfer(handle, t);
@@ -162,6 +206,7 @@ scmi_perf_domain_attributes_get(const struct scmi_handle *handle, u32 domain,
dom_info->set_perf = SUPPORTS_SET_PERF_LVL(flags);
dom_info->perf_limit_notify = SUPPORTS_PERF_LIMIT_NOTIFY(flags);
dom_info->perf_level_notify = SUPPORTS_PERF_LEVEL_NOTIFY(flags);
+ dom_info->perf_fastchannels = SUPPORTS_PERF_FASTCHANNELS(flags);
dom_info->sustained_freq_khz =
le32_to_cpu(attr->sustained_freq_khz);
dom_info->sustained_perf_level =
@@ -249,8 +294,42 @@ scmi_perf_describe_levels_get(const struct scmi_handle *handle, u32 domain,
return ret;
}
-static int scmi_perf_limits_set(const struct scmi_handle *handle, u32 domain,
- u32 max_perf, u32 min_perf)
+#define SCMI_PERF_FC_RING_DB(w) \
+do { \
+ u##w val = 0; \
+ \
+ if (db->mask) \
+ val = ioread##w(db->addr) & db->mask; \
+ iowrite##w((u##w)db->set | val, db->addr); \
+} while (0)
+
+static void scmi_perf_fc_ring_db(struct scmi_fc_db_info *db)
+{
+ if (!db || !db->addr)
+ return;
+
+ if (db->width == 1)
+ SCMI_PERF_FC_RING_DB(8);
+ else if (db->width == 2)
+ SCMI_PERF_FC_RING_DB(16);
+ else if (db->width == 4)
+ SCMI_PERF_FC_RING_DB(32);
+ else /* db->width == 8 */
+#ifdef CONFIG_64BIT
+ SCMI_PERF_FC_RING_DB(64);
+#else
+ {
+ u64 val = 0;
+
+ if (db->mask)
+ val = ioread64_hi_lo(db->addr) & db->mask;
+ iowrite64_hi_lo(db->set, db->addr);
+ }
+#endif
+}
+
+static int scmi_perf_mb_limits_set(const struct scmi_handle *handle, u32 domain,
+ u32 max_perf, u32 min_perf)
{
int ret;
struct scmi_xfer *t;
@@ -272,8 +351,24 @@ static int scmi_perf_limits_set(const struct scmi_handle *handle, u32 domain,
return ret;
}
-static int scmi_perf_limits_get(const struct scmi_handle *handle, u32 domain,
- u32 *max_perf, u32 *min_perf)
+static int scmi_perf_limits_set(const struct scmi_handle *handle, u32 domain,
+ u32 max_perf, u32 min_perf)
+{
+ struct scmi_perf_info *pi = handle->perf_priv;
+ struct perf_dom_info *dom = pi->dom_info + domain;
+
+ if (dom->fc_info && dom->fc_info->limit_set_addr) {
+ iowrite32(max_perf, dom->fc_info->limit_set_addr);
+ iowrite32(min_perf, dom->fc_info->limit_set_addr + 4);
+ scmi_perf_fc_ring_db(dom->fc_info->limit_set_db);
+ return 0;
+ }
+
+ return scmi_perf_mb_limits_set(handle, domain, max_perf, min_perf);
+}
+
+static int scmi_perf_mb_limits_get(const struct scmi_handle *handle, u32 domain,
+ u32 *max_perf, u32 *min_perf)
{
int ret;
struct scmi_xfer *t;
@@ -284,7 +379,7 @@ static int scmi_perf_limits_get(const struct scmi_handle *handle, u32 domain,
if (ret)
return ret;
- *(__le32 *)t->tx.buf = cpu_to_le32(domain);
+ put_unaligned_le32(domain, t->tx.buf);
ret = scmi_do_xfer(handle, t);
if (!ret) {
@@ -298,8 +393,23 @@ static int scmi_perf_limits_get(const struct scmi_handle *handle, u32 domain,
return ret;
}
-static int scmi_perf_level_set(const struct scmi_handle *handle, u32 domain,
- u32 level, bool poll)
+static int scmi_perf_limits_get(const struct scmi_handle *handle, u32 domain,
+ u32 *max_perf, u32 *min_perf)
+{
+ struct scmi_perf_info *pi = handle->perf_priv;
+ struct perf_dom_info *dom = pi->dom_info + domain;
+
+ if (dom->fc_info && dom->fc_info->limit_get_addr) {
+ *max_perf = ioread32(dom->fc_info->limit_get_addr);
+ *min_perf = ioread32(dom->fc_info->limit_get_addr + 4);
+ return 0;
+ }
+
+ return scmi_perf_mb_limits_get(handle, domain, max_perf, min_perf);
+}
+
+static int scmi_perf_mb_level_set(const struct scmi_handle *handle, u32 domain,
+ u32 level, bool poll)
{
int ret;
struct scmi_xfer *t;
@@ -321,8 +431,23 @@ static int scmi_perf_level_set(const struct scmi_handle *handle, u32 domain,
return ret;
}
-static int scmi_perf_level_get(const struct scmi_handle *handle, u32 domain,
- u32 *level, bool poll)
+static int scmi_perf_level_set(const struct scmi_handle *handle, u32 domain,
+ u32 level, bool poll)
+{
+ struct scmi_perf_info *pi = handle->perf_priv;
+ struct perf_dom_info *dom = pi->dom_info + domain;
+
+ if (dom->fc_info && dom->fc_info->level_set_addr) {
+ iowrite32(level, dom->fc_info->level_set_addr);
+ scmi_perf_fc_ring_db(dom->fc_info->level_set_db);
+ return 0;
+ }
+
+ return scmi_perf_mb_level_set(handle, domain, level, poll);
+}
+
+static int scmi_perf_mb_level_get(const struct scmi_handle *handle, u32 domain,
+ u32 *level, bool poll)
{
int ret;
struct scmi_xfer *t;
@@ -333,16 +458,128 @@ static int scmi_perf_level_get(const struct scmi_handle *handle, u32 domain,
return ret;
t->hdr.poll_completion = poll;
- *(__le32 *)t->tx.buf = cpu_to_le32(domain);
+ put_unaligned_le32(domain, t->tx.buf);
ret = scmi_do_xfer(handle, t);
if (!ret)
- *level = le32_to_cpu(*(__le32 *)t->rx.buf);
+ *level = get_unaligned_le32(t->rx.buf);
scmi_xfer_put(handle, t);
return ret;
}
+static int scmi_perf_level_get(const struct scmi_handle *handle, u32 domain,
+ u32 *level, bool poll)
+{
+ struct scmi_perf_info *pi = handle->perf_priv;
+ struct perf_dom_info *dom = pi->dom_info + domain;
+
+ if (dom->fc_info && dom->fc_info->level_get_addr) {
+ *level = ioread32(dom->fc_info->level_get_addr);
+ return 0;
+ }
+
+ return scmi_perf_mb_level_get(handle, domain, level, poll);
+}
+
+static bool scmi_perf_fc_size_is_valid(u32 msg, u32 size)
+{
+ if ((msg == PERF_LEVEL_GET || msg == PERF_LEVEL_SET) && size == 4)
+ return true;
+ if ((msg == PERF_LIMITS_GET || msg == PERF_LIMITS_SET) && size == 8)
+ return true;
+ return false;
+}
+
+static void
+scmi_perf_domain_desc_fc(const struct scmi_handle *handle, u32 domain,
+ u32 message_id, void __iomem **p_addr,
+ struct scmi_fc_db_info **p_db)
+{
+ int ret;
+ u32 flags;
+ u64 phys_addr;
+ u8 size;
+ void __iomem *addr;
+ struct scmi_xfer *t;
+ struct scmi_fc_db_info *db;
+ struct scmi_perf_get_fc_info *info;
+ struct scmi_msg_resp_perf_desc_fc *resp;
+
+ if (!p_addr)
+ return;
+
+ ret = scmi_xfer_get_init(handle, PERF_DESCRIBE_FASTCHANNEL,
+ SCMI_PROTOCOL_PERF,
+ sizeof(*info), sizeof(*resp), &t);
+ if (ret)
+ return;
+
+ info = t->tx.buf;
+ info->domain = cpu_to_le32(domain);
+ info->message_id = cpu_to_le32(message_id);
+
+ ret = scmi_do_xfer(handle, t);
+ if (ret)
+ goto err_xfer;
+
+ resp = t->rx.buf;
+ flags = le32_to_cpu(resp->attr);
+ size = le32_to_cpu(resp->chan_size);
+ if (!scmi_perf_fc_size_is_valid(message_id, size))
+ goto err_xfer;
+
+ phys_addr = le32_to_cpu(resp->chan_addr_low);
+ phys_addr |= (u64)le32_to_cpu(resp->chan_addr_high) << 32;
+ addr = devm_ioremap(handle->dev, phys_addr, size);
+ if (!addr)
+ goto err_xfer;
+ *p_addr = addr;
+
+ if (p_db && SUPPORTS_DOORBELL(flags)) {
+ db = devm_kzalloc(handle->dev, sizeof(*db), GFP_KERNEL);
+ if (!db)
+ goto err_xfer;
+
+ size = 1 << DOORBELL_REG_WIDTH(flags);
+ phys_addr = le32_to_cpu(resp->db_addr_low);
+ phys_addr |= (u64)le32_to_cpu(resp->db_addr_high) << 32;
+ addr = devm_ioremap(handle->dev, phys_addr, size);
+ if (!addr)
+ goto err_xfer;
+
+ db->addr = addr;
+ db->width = size;
+ db->set = le32_to_cpu(resp->db_set_lmask);
+ db->set |= (u64)le32_to_cpu(resp->db_set_hmask) << 32;
+ db->mask = le32_to_cpu(resp->db_preserve_lmask);
+ db->mask |= (u64)le32_to_cpu(resp->db_preserve_hmask) << 32;
+ *p_db = db;
+ }
+err_xfer:
+ scmi_xfer_put(handle, t);
+}
+
+static void scmi_perf_domain_init_fc(const struct scmi_handle *handle,
+ u32 domain, struct scmi_fc_info **p_fc)
+{
+ struct scmi_fc_info *fc;
+
+ fc = devm_kzalloc(handle->dev, sizeof(*fc), GFP_KERNEL);
+ if (!fc)
+ return;
+
+ scmi_perf_domain_desc_fc(handle, domain, PERF_LEVEL_SET,
+ &fc->level_set_addr, &fc->level_set_db);
+ scmi_perf_domain_desc_fc(handle, domain, PERF_LEVEL_GET,
+ &fc->level_get_addr, NULL);
+ scmi_perf_domain_desc_fc(handle, domain, PERF_LIMITS_SET,
+ &fc->limit_set_addr, &fc->limit_set_db);
+ scmi_perf_domain_desc_fc(handle, domain, PERF_LIMITS_GET,
+ &fc->limit_get_addr, NULL);
+ *p_fc = fc;
+}
+
/* Device specific ops */
static int scmi_dev_domain_id(struct device *dev)
{
@@ -494,6 +731,9 @@ static int scmi_perf_protocol_init(struct scmi_handle *handle)
scmi_perf_domain_attributes_get(handle, domain, dom);
scmi_perf_describe_levels_get(handle, domain, dom);
+
+ if (dom->perf_fastchannels)
+ scmi_perf_domain_init_fc(handle, domain, &dom->fc_info);
}
handle->perf_ops = &perf_ops;
diff --git a/drivers/firmware/arm_scmi/power.c b/drivers/firmware/arm_scmi/power.c
index 62f3401a1f01..5abef7079c0a 100644
--- a/drivers/firmware/arm_scmi/power.c
+++ b/drivers/firmware/arm_scmi/power.c
@@ -96,7 +96,7 @@ scmi_power_domain_attributes_get(const struct scmi_handle *handle, u32 domain,
if (ret)
return ret;
- *(__le32 *)t->tx.buf = cpu_to_le32(domain);
+ put_unaligned_le32(domain, t->tx.buf);
attr = t->rx.buf;
ret = scmi_do_xfer(handle, t);
@@ -147,11 +147,11 @@ scmi_power_state_get(const struct scmi_handle *handle, u32 domain, u32 *state)
if (ret)
return ret;
- *(__le32 *)t->tx.buf = cpu_to_le32(domain);
+ put_unaligned_le32(domain, t->tx.buf);
ret = scmi_do_xfer(handle, t);
if (!ret)
- *state = le32_to_cpu(*(__le32 *)t->rx.buf);
+ *state = get_unaligned_le32(t->rx.buf);
scmi_xfer_put(handle, t);
return ret;
diff --git a/drivers/firmware/arm_scmi/reset.c b/drivers/firmware/arm_scmi/reset.c
new file mode 100644
index 000000000000..64cc81915581
--- /dev/null
+++ b/drivers/firmware/arm_scmi/reset.c
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * System Control and Management Interface (SCMI) Reset Protocol
+ *
+ * Copyright (C) 2019 ARM Ltd.
+ */
+
+#include "common.h"
+
+enum scmi_reset_protocol_cmd {
+ RESET_DOMAIN_ATTRIBUTES = 0x3,
+ RESET = 0x4,
+ RESET_NOTIFY = 0x5,
+};
+
+enum scmi_reset_protocol_notify {
+ RESET_ISSUED = 0x0,
+};
+
+#define NUM_RESET_DOMAIN_MASK 0xffff
+#define RESET_NOTIFY_ENABLE BIT(0)
+
+struct scmi_msg_resp_reset_domain_attributes {
+ __le32 attributes;
+#define SUPPORTS_ASYNC_RESET(x) ((x) & BIT(31))
+#define SUPPORTS_NOTIFY_RESET(x) ((x) & BIT(30))
+ __le32 latency;
+ u8 name[SCMI_MAX_STR_SIZE];
+};
+
+struct scmi_msg_reset_domain_reset {
+ __le32 domain_id;
+ __le32 flags;
+#define AUTONOMOUS_RESET BIT(0)
+#define EXPLICIT_RESET_ASSERT BIT(1)
+#define ASYNCHRONOUS_RESET BIT(2)
+ __le32 reset_state;
+#define ARCH_RESET_TYPE BIT(31)
+#define COLD_RESET_STATE BIT(0)
+#define ARCH_COLD_RESET (ARCH_RESET_TYPE | COLD_RESET_STATE)
+};
+
+struct reset_dom_info {
+ bool async_reset;
+ bool reset_notify;
+ u32 latency_us;
+ char name[SCMI_MAX_STR_SIZE];
+};
+
+struct scmi_reset_info {
+ int num_domains;
+ struct reset_dom_info *dom_info;
+};
+
+static int scmi_reset_attributes_get(const struct scmi_handle *handle,
+ struct scmi_reset_info *pi)
+{
+ int ret;
+ struct scmi_xfer *t;
+ u32 attr;
+
+ ret = scmi_xfer_get_init(handle, PROTOCOL_ATTRIBUTES,
+ SCMI_PROTOCOL_RESET, 0, sizeof(attr), &t);
+ if (ret)
+ return ret;
+
+ ret = scmi_do_xfer(handle, t);
+ if (!ret) {
+ attr = get_unaligned_le32(t->rx.buf);
+ pi->num_domains = attr & NUM_RESET_DOMAIN_MASK;
+ }
+
+ scmi_xfer_put(handle, t);
+ return ret;
+}
+
+static int
+scmi_reset_domain_attributes_get(const struct scmi_handle *handle, u32 domain,
+ struct reset_dom_info *dom_info)
+{
+ int ret;
+ struct scmi_xfer *t;
+ struct scmi_msg_resp_reset_domain_attributes *attr;
+
+ ret = scmi_xfer_get_init(handle, RESET_DOMAIN_ATTRIBUTES,
+ SCMI_PROTOCOL_RESET, sizeof(domain),
+ sizeof(*attr), &t);
+ if (ret)
+ return ret;
+
+ put_unaligned_le32(domain, t->tx.buf);
+ attr = t->rx.buf;
+
+ ret = scmi_do_xfer(handle, t);
+ if (!ret) {
+ u32 attributes = le32_to_cpu(attr->attributes);
+
+ dom_info->async_reset = SUPPORTS_ASYNC_RESET(attributes);
+ dom_info->reset_notify = SUPPORTS_NOTIFY_RESET(attributes);
+ dom_info->latency_us = le32_to_cpu(attr->latency);
+ if (dom_info->latency_us == U32_MAX)
+ dom_info->latency_us = 0;
+ strlcpy(dom_info->name, attr->name, SCMI_MAX_STR_SIZE);
+ }
+
+ scmi_xfer_put(handle, t);
+ return ret;
+}
+
+static int scmi_reset_num_domains_get(const struct scmi_handle *handle)
+{
+ struct scmi_reset_info *pi = handle->reset_priv;
+
+ return pi->num_domains;
+}
+
+static char *scmi_reset_name_get(const struct scmi_handle *handle, u32 domain)
+{
+ struct scmi_reset_info *pi = handle->reset_priv;
+ struct reset_dom_info *dom = pi->dom_info + domain;
+
+ return dom->name;
+}
+
+static int scmi_reset_latency_get(const struct scmi_handle *handle, u32 domain)
+{
+ struct scmi_reset_info *pi = handle->reset_priv;
+ struct reset_dom_info *dom = pi->dom_info + domain;
+
+ return dom->latency_us;
+}
+
+static int scmi_domain_reset(const struct scmi_handle *handle, u32 domain,
+ u32 flags, u32 state)
+{
+ int ret;
+ struct scmi_xfer *t;
+ struct scmi_msg_reset_domain_reset *dom;
+ struct scmi_reset_info *pi = handle->reset_priv;
+ struct reset_dom_info *rdom = pi->dom_info + domain;
+
+ if (rdom->async_reset)
+ flags |= ASYNCHRONOUS_RESET;
+
+ ret = scmi_xfer_get_init(handle, RESET, SCMI_PROTOCOL_RESET,
+ sizeof(*dom), 0, &t);
+ if (ret)
+ return ret;
+
+ dom = t->tx.buf;
+ dom->domain_id = cpu_to_le32(domain);
+ dom->flags = cpu_to_le32(flags);
+ dom->domain_id = cpu_to_le32(state);
+
+ if (rdom->async_reset)
+ ret = scmi_do_xfer_with_response(handle, t);
+ else
+ ret = scmi_do_xfer(handle, t);
+
+ scmi_xfer_put(handle, t);
+ return ret;
+}
+
+static int scmi_reset_domain_reset(const struct scmi_handle *handle, u32 domain)
+{
+ return scmi_domain_reset(handle, domain, AUTONOMOUS_RESET,
+ ARCH_COLD_RESET);
+}
+
+static int
+scmi_reset_domain_assert(const struct scmi_handle *handle, u32 domain)
+{
+ return scmi_domain_reset(handle, domain, EXPLICIT_RESET_ASSERT,
+ ARCH_COLD_RESET);
+}
+
+static int
+scmi_reset_domain_deassert(const struct scmi_handle *handle, u32 domain)
+{
+ return scmi_domain_reset(handle, domain, 0, ARCH_COLD_RESET);
+}
+
+static struct scmi_reset_ops reset_ops = {
+ .num_domains_get = scmi_reset_num_domains_get,
+ .name_get = scmi_reset_name_get,
+ .latency_get = scmi_reset_latency_get,
+ .reset = scmi_reset_domain_reset,
+ .assert = scmi_reset_domain_assert,
+ .deassert = scmi_reset_domain_deassert,
+};
+
+static int scmi_reset_protocol_init(struct scmi_handle *handle)
+{
+ int domain;
+ u32 version;
+ struct scmi_reset_info *pinfo;
+
+ scmi_version_get(handle, SCMI_PROTOCOL_RESET, &version);
+
+ dev_dbg(handle->dev, "Reset Version %d.%d\n",
+ PROTOCOL_REV_MAJOR(version), PROTOCOL_REV_MINOR(version));
+
+ pinfo = devm_kzalloc(handle->dev, sizeof(*pinfo), GFP_KERNEL);
+ if (!pinfo)
+ return -ENOMEM;
+
+ scmi_reset_attributes_get(handle, pinfo);
+
+ pinfo->dom_info = devm_kcalloc(handle->dev, pinfo->num_domains,
+ sizeof(*pinfo->dom_info), GFP_KERNEL);
+ if (!pinfo->dom_info)
+ return -ENOMEM;
+
+ for (domain = 0; domain < pinfo->num_domains; domain++) {
+ struct reset_dom_info *dom = pinfo->dom_info + domain;
+
+ scmi_reset_domain_attributes_get(handle, domain, dom);
+ }
+
+ handle->reset_ops = &reset_ops;
+ handle->reset_priv = pinfo;
+
+ return 0;
+}
+
+static int __init scmi_reset_init(void)
+{
+ return scmi_protocol_register(SCMI_PROTOCOL_RESET,
+ &scmi_reset_protocol_init);
+}
+subsys_initcall(scmi_reset_init);
diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c
index 0e94ab56f679..a400ea805fc2 100644
--- a/drivers/firmware/arm_scmi/sensors.c
+++ b/drivers/firmware/arm_scmi/sensors.c
@@ -9,8 +9,8 @@
enum scmi_sensor_protocol_cmd {
SENSOR_DESCRIPTION_GET = 0x3,
- SENSOR_CONFIG_SET = 0x4,
- SENSOR_TRIP_POINT_SET = 0x5,
+ SENSOR_TRIP_POINT_NOTIFY = 0x4,
+ SENSOR_TRIP_POINT_CONFIG = 0x5,
SENSOR_READING_GET = 0x6,
};
@@ -42,9 +42,10 @@ struct scmi_msg_resp_sensor_description {
} desc[0];
};
-struct scmi_msg_set_sensor_config {
+struct scmi_msg_sensor_trip_point_notify {
__le32 id;
__le32 event_control;
+#define SENSOR_TP_NOTIFY_ALL BIT(0)
};
struct scmi_msg_set_sensor_trip_point {
@@ -119,7 +120,7 @@ static int scmi_sensor_description_get(const struct scmi_handle *handle,
do {
/* Set the number of sensors to be skipped/already read */
- *(__le32 *)t->tx.buf = cpu_to_le32(desc_index);
+ put_unaligned_le32(desc_index, t->tx.buf);
ret = scmi_do_xfer(handle, t);
if (ret)
@@ -135,9 +136,10 @@ static int scmi_sensor_description_get(const struct scmi_handle *handle,
}
for (cnt = 0; cnt < num_returned; cnt++) {
- u32 attrh;
+ u32 attrh, attrl;
struct scmi_sensor_info *s;
+ attrl = le32_to_cpu(buf->desc[cnt].attributes_low);
attrh = le32_to_cpu(buf->desc[cnt].attributes_high);
s = &si->sensors[desc_index + cnt];
s->id = le32_to_cpu(buf->desc[cnt].id);
@@ -146,6 +148,8 @@ static int scmi_sensor_description_get(const struct scmi_handle *handle,
/* Sign extend to a full s8 */
if (s->scale & SENSOR_SCALE_SIGN)
s->scale |= SENSOR_SCALE_EXTEND;
+ s->async = SUPPORTS_ASYNC_READ(attrl);
+ s->num_trip_points = NUM_TRIP_POINTS(attrl);
strlcpy(s->name, buf->desc[cnt].name, SCMI_MAX_STR_SIZE);
}
@@ -160,15 +164,15 @@ static int scmi_sensor_description_get(const struct scmi_handle *handle,
return ret;
}
-static int
-scmi_sensor_configuration_set(const struct scmi_handle *handle, u32 sensor_id)
+static int scmi_sensor_trip_point_notify(const struct scmi_handle *handle,
+ u32 sensor_id, bool enable)
{
int ret;
- u32 evt_cntl = BIT(0);
+ u32 evt_cntl = enable ? SENSOR_TP_NOTIFY_ALL : 0;
struct scmi_xfer *t;
- struct scmi_msg_set_sensor_config *cfg;
+ struct scmi_msg_sensor_trip_point_notify *cfg;
- ret = scmi_xfer_get_init(handle, SENSOR_CONFIG_SET,
+ ret = scmi_xfer_get_init(handle, SENSOR_TRIP_POINT_NOTIFY,
SCMI_PROTOCOL_SENSOR, sizeof(*cfg), 0, &t);
if (ret)
return ret;
@@ -183,15 +187,16 @@ scmi_sensor_configuration_set(const struct scmi_handle *handle, u32 sensor_id)
return ret;
}
-static int scmi_sensor_trip_point_set(const struct scmi_handle *handle,
- u32 sensor_id, u8 trip_id, u64 trip_value)
+static int
+scmi_sensor_trip_point_config(const struct scmi_handle *handle, u32 sensor_id,
+ u8 trip_id, u64 trip_value)
{
int ret;
u32 evt_cntl = SENSOR_TP_BOTH;
struct scmi_xfer *t;
struct scmi_msg_set_sensor_trip_point *trip;
- ret = scmi_xfer_get_init(handle, SENSOR_TRIP_POINT_SET,
+ ret = scmi_xfer_get_init(handle, SENSOR_TRIP_POINT_CONFIG,
SCMI_PROTOCOL_SENSOR, sizeof(*trip), 0, &t);
if (ret)
return ret;
@@ -209,11 +214,13 @@ static int scmi_sensor_trip_point_set(const struct scmi_handle *handle,
}
static int scmi_sensor_reading_get(const struct scmi_handle *handle,
- u32 sensor_id, bool async, u64 *value)
+ u32 sensor_id, u64 *value)
{
int ret;
struct scmi_xfer *t;
struct scmi_msg_sensor_reading_get *sensor;
+ struct sensors_info *si = handle->sensor_priv;
+ struct scmi_sensor_info *s = si->sensors + sensor_id;
ret = scmi_xfer_get_init(handle, SENSOR_READING_GET,
SCMI_PROTOCOL_SENSOR, sizeof(*sensor),
@@ -223,14 +230,18 @@ static int scmi_sensor_reading_get(const struct scmi_handle *handle,
sensor = t->tx.buf;
sensor->id = cpu_to_le32(sensor_id);
- sensor->flags = cpu_to_le32(async ? SENSOR_READ_ASYNC : 0);
- ret = scmi_do_xfer(handle, t);
- if (!ret) {
- __le32 *pval = t->rx.buf;
-
- *value = le32_to_cpu(*pval);
- *value |= (u64)le32_to_cpu(*(pval + 1)) << 32;
+ if (s->async) {
+ sensor->flags = cpu_to_le32(SENSOR_READ_ASYNC);
+ ret = scmi_do_xfer_with_response(handle, t);
+ if (!ret)
+ *value = get_unaligned_le64((void *)
+ ((__le32 *)t->rx.buf + 1));
+ } else {
+ sensor->flags = cpu_to_le32(0);
+ ret = scmi_do_xfer(handle, t);
+ if (!ret)
+ *value = get_unaligned_le64(t->rx.buf);
}
scmi_xfer_put(handle, t);
@@ -255,8 +266,8 @@ static int scmi_sensor_count_get(const struct scmi_handle *handle)
static struct scmi_sensor_ops sensor_ops = {
.count_get = scmi_sensor_count_get,
.info_get = scmi_sensor_info_get,
- .configuration_set = scmi_sensor_configuration_set,
- .trip_point_set = scmi_sensor_trip_point_set,
+ .trip_point_notify = scmi_sensor_trip_point_notify,
+ .trip_point_config = scmi_sensor_trip_point_config,
.reading_get = scmi_sensor_reading_get,
};
diff --git a/drivers/firmware/imx/Kconfig b/drivers/firmware/imx/Kconfig
index 42b566f8903f..0dbee32da4c6 100644
--- a/drivers/firmware/imx/Kconfig
+++ b/drivers/firmware/imx/Kconfig
@@ -1,4 +1,15 @@
# SPDX-License-Identifier: GPL-2.0-only
+config IMX_DSP
+ bool "IMX DSP Protocol driver"
+ depends on IMX_MBOX
+ help
+ This enables DSP IPC protocol between host AP (Linux)
+ and the firmware running on DSP.
+ DSP exists on some i.MX8 processors (e.g i.MX8QM, i.MX8QXP).
+
+ It acts like a doorbell. Client might use shared memory to
+ exchange information with DSP side.
+
config IMX_SCU
bool "IMX SCU Protocol driver"
depends on IMX_MBOX
diff --git a/drivers/firmware/imx/Makefile b/drivers/firmware/imx/Makefile
index 802c4ad8e8f9..08bc9ddfbdfb 100644
--- a/drivers/firmware/imx/Makefile
+++ b/drivers/firmware/imx/Makefile
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_IMX_DSP) += imx-dsp.o
obj-$(CONFIG_IMX_SCU) += imx-scu.o misc.o imx-scu-irq.o
obj-$(CONFIG_IMX_SCU_PD) += scu-pd.o
diff --git a/drivers/firmware/imx/imx-dsp.c b/drivers/firmware/imx/imx-dsp.c
new file mode 100644
index 000000000000..a43d2db5cbdb
--- /dev/null
+++ b/drivers/firmware/imx/imx-dsp.c
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ * Author: Daniel Baluta <daniel.baluta@nxp.com>
+ *
+ * Implementation of the DSP IPC interface (host side)
+ */
+
+#include <linux/firmware/imx/dsp.h>
+#include <linux/kernel.h>
+#include <linux/mailbox_client.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/*
+ * imx_dsp_ring_doorbell - triggers an interrupt on the other side (DSP)
+ *
+ * @dsp: DSP IPC handle
+ * @chan_idx: index of the channel where to trigger the interrupt
+ *
+ * Returns non-negative value for success, negative value for error
+ */
+int imx_dsp_ring_doorbell(struct imx_dsp_ipc *ipc, unsigned int idx)
+{
+ int ret;
+ struct imx_dsp_chan *dsp_chan;
+
+ if (idx >= DSP_MU_CHAN_NUM)
+ return -EINVAL;
+
+ dsp_chan = &ipc->chans[idx];
+ ret = mbox_send_message(dsp_chan->ch, NULL);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+EXPORT_SYMBOL(imx_dsp_ring_doorbell);
+
+/*
+ * imx_dsp_handle_rx - rx callback used by imx mailbox
+ *
+ * @c: mbox client
+ * @msg: message received
+ *
+ * Users of DSP IPC will need to privde handle_reply and handle_request
+ * callbacks.
+ */
+static void imx_dsp_handle_rx(struct mbox_client *c, void *msg)
+{
+ struct imx_dsp_chan *chan = container_of(c, struct imx_dsp_chan, cl);
+
+ if (chan->idx == 0) {
+ chan->ipc->ops->handle_reply(chan->ipc);
+ } else {
+ chan->ipc->ops->handle_request(chan->ipc);
+ imx_dsp_ring_doorbell(chan->ipc, 1);
+ }
+}
+
+static int imx_dsp_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct imx_dsp_ipc *dsp_ipc;
+ struct imx_dsp_chan *dsp_chan;
+ struct mbox_client *cl;
+ char *chan_name;
+ int ret;
+ int i, j;
+
+ device_set_of_node_from_dev(&pdev->dev, pdev->dev.parent);
+
+ dsp_ipc = devm_kzalloc(dev, sizeof(*dsp_ipc), GFP_KERNEL);
+ if (!dsp_ipc)
+ return -ENOMEM;
+
+ for (i = 0; i < DSP_MU_CHAN_NUM; i++) {
+ if (i < 2)
+ chan_name = kasprintf(GFP_KERNEL, "txdb%d", i);
+ else
+ chan_name = kasprintf(GFP_KERNEL, "rxdb%d", i - 2);
+
+ if (!chan_name)
+ return -ENOMEM;
+
+ dsp_chan = &dsp_ipc->chans[i];
+ cl = &dsp_chan->cl;
+ cl->dev = dev;
+ cl->tx_block = false;
+ cl->knows_txdone = true;
+ cl->rx_callback = imx_dsp_handle_rx;
+
+ dsp_chan->ipc = dsp_ipc;
+ dsp_chan->idx = i % 2;
+ dsp_chan->ch = mbox_request_channel_byname(cl, chan_name);
+ if (IS_ERR(dsp_chan->ch)) {
+ ret = PTR_ERR(dsp_chan->ch);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Failed to request mbox chan %s ret %d\n",
+ chan_name, ret);
+ goto out;
+ }
+
+ dev_dbg(dev, "request mbox chan %s\n", chan_name);
+ /* chan_name is not used anymore by framework */
+ kfree(chan_name);
+ }
+
+ dsp_ipc->dev = dev;
+
+ dev_set_drvdata(dev, dsp_ipc);
+
+ dev_info(dev, "NXP i.MX DSP IPC initialized\n");
+
+ return devm_of_platform_populate(dev);
+out:
+ kfree(chan_name);
+ for (j = 0; j < i; j++) {
+ dsp_chan = &dsp_ipc->chans[j];
+ mbox_free_channel(dsp_chan->ch);
+ }
+
+ return ret;
+}
+
+static int imx_dsp_remove(struct platform_device *pdev)
+{
+ struct imx_dsp_chan *dsp_chan;
+ struct imx_dsp_ipc *dsp_ipc;
+ int i;
+
+ dsp_ipc = dev_get_drvdata(&pdev->dev);
+
+ for (i = 0; i < DSP_MU_CHAN_NUM; i++) {
+ dsp_chan = &dsp_ipc->chans[i];
+ mbox_free_channel(dsp_chan->ch);
+ }
+
+ return 0;
+}
+
+static struct platform_driver imx_dsp_driver = {
+ .driver = {
+ .name = "imx-dsp",
+ },
+ .probe = imx_dsp_probe,
+ .remove = imx_dsp_remove,
+};
+builtin_platform_driver(imx_dsp_driver);
+
+MODULE_AUTHOR("Daniel Baluta <daniel.baluta@nxp.com>");
+MODULE_DESCRIPTION("IMX DSP IPC protocol driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/firmware/imx/scu-pd.c b/drivers/firmware/imx/scu-pd.c
index 480cec69e2c9..b556612207e5 100644
--- a/drivers/firmware/imx/scu-pd.c
+++ b/drivers/firmware/imx/scu-pd.c
@@ -92,7 +92,8 @@ static const struct imx_sc_pd_range imx8qxp_scu_pd_ranges[] = {
{ "gpt", IMX_SC_R_GPT_0, 5, true, 0 },
{ "kpp", IMX_SC_R_KPP, 1, false, 0 },
{ "fspi", IMX_SC_R_FSPI_0, 2, true, 0 },
- { "mu", IMX_SC_R_MU_0A, 14, true, 0 },
+ { "mu_a", IMX_SC_R_MU_0A, 14, true, 0 },
+ { "mu_b", IMX_SC_R_MU_13B, 1, true, 13 },
/* CONN SS */
{ "usb", IMX_SC_R_USB_0, 2, true, 0 },
@@ -130,6 +131,7 @@ static const struct imx_sc_pd_range imx8qxp_scu_pd_ranges[] = {
{ "lcd0-pwm", IMX_SC_R_LCD_0_PWM_0, 1, true, 0 },
{ "lpuart", IMX_SC_R_UART_0, 4, true, 0 },
{ "lpspi", IMX_SC_R_SPI_0, 4, true, 0 },
+ { "irqstr_dsp", IMX_SC_R_IRQSTR_DSP, 1, false, 0 },
/* VPU SS */
{ "vpu", IMX_SC_R_VPU, 1, false, 0 },
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index 2ddc118dba1b..4802ab170fe5 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -9,6 +9,7 @@
#include <linux/init.h>
#include <linux/cpumask.h>
#include <linux/export.h>
+#include <linux/dma-direct.h>
#include <linux/dma-mapping.h>
#include <linux/module.h>
#include <linux/types.h>
@@ -425,21 +426,23 @@ EXPORT_SYMBOL(qcom_scm_set_remote_state);
* @mem_sz: size of the region.
* @srcvm: vmid for current set of owners, each set bit in
* flag indicate a unique owner
- * @newvm: array having new owners and corrsponding permission
+ * @newvm: array having new owners and corresponding permission
* flags
* @dest_cnt: number of owners in next set.
*
- * Return negative errno on failure, 0 on success, with @srcvm updated.
+ * Return negative errno on failure or 0 on success with @srcvm updated.
*/
int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
unsigned int *srcvm,
- struct qcom_scm_vmperm *newvm, int dest_cnt)
+ const struct qcom_scm_vmperm *newvm,
+ unsigned int dest_cnt)
{
struct qcom_scm_current_perm_info *destvm;
struct qcom_scm_mem_map_info *mem_to_map;
phys_addr_t mem_to_map_phys;
phys_addr_t dest_phys;
phys_addr_t ptr_phys;
+ dma_addr_t ptr_dma;
size_t mem_to_map_sz;
size_t dest_sz;
size_t src_sz;
@@ -447,52 +450,50 @@ int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
int next_vm;
__le32 *src;
void *ptr;
- int ret;
- int len;
- int i;
+ int ret, i, b;
+ unsigned long srcvm_bits = *srcvm;
- src_sz = hweight_long(*srcvm) * sizeof(*src);
+ src_sz = hweight_long(srcvm_bits) * sizeof(*src);
mem_to_map_sz = sizeof(*mem_to_map);
dest_sz = dest_cnt * sizeof(*destvm);
ptr_sz = ALIGN(src_sz, SZ_64) + ALIGN(mem_to_map_sz, SZ_64) +
ALIGN(dest_sz, SZ_64);
- ptr = dma_alloc_coherent(__scm->dev, ptr_sz, &ptr_phys, GFP_KERNEL);
+ ptr = dma_alloc_coherent(__scm->dev, ptr_sz, &ptr_dma, GFP_KERNEL);
if (!ptr)
return -ENOMEM;
+ ptr_phys = dma_to_phys(__scm->dev, ptr_dma);
/* Fill source vmid detail */
src = ptr;
- len = hweight_long(*srcvm);
- for (i = 0; i < len; i++) {
- src[i] = cpu_to_le32(ffs(*srcvm) - 1);
- *srcvm ^= 1 << (ffs(*srcvm) - 1);
- }
+ i = 0;
+ for_each_set_bit(b, &srcvm_bits, BITS_PER_LONG)
+ src[i++] = cpu_to_le32(b);
/* Fill details of mem buff to map */
mem_to_map = ptr + ALIGN(src_sz, SZ_64);
mem_to_map_phys = ptr_phys + ALIGN(src_sz, SZ_64);
- mem_to_map[0].mem_addr = cpu_to_le64(mem_addr);
- mem_to_map[0].mem_size = cpu_to_le64(mem_sz);
+ mem_to_map->mem_addr = cpu_to_le64(mem_addr);
+ mem_to_map->mem_size = cpu_to_le64(mem_sz);
next_vm = 0;
/* Fill details of next vmid detail */
destvm = ptr + ALIGN(mem_to_map_sz, SZ_64) + ALIGN(src_sz, SZ_64);
dest_phys = ptr_phys + ALIGN(mem_to_map_sz, SZ_64) + ALIGN(src_sz, SZ_64);
- for (i = 0; i < dest_cnt; i++) {
- destvm[i].vmid = cpu_to_le32(newvm[i].vmid);
- destvm[i].perm = cpu_to_le32(newvm[i].perm);
- destvm[i].ctx = 0;
- destvm[i].ctx_size = 0;
- next_vm |= BIT(newvm[i].vmid);
+ for (i = 0; i < dest_cnt; i++, destvm++, newvm++) {
+ destvm->vmid = cpu_to_le32(newvm->vmid);
+ destvm->perm = cpu_to_le32(newvm->perm);
+ destvm->ctx = 0;
+ destvm->ctx_size = 0;
+ next_vm |= BIT(newvm->vmid);
}
ret = __qcom_scm_assign_mem(__scm->dev, mem_to_map_phys, mem_to_map_sz,
ptr_phys, src_sz, dest_phys, dest_sz);
- dma_free_coherent(__scm->dev, ALIGN(ptr_sz, SZ_64), ptr, ptr_phys);
+ dma_free_coherent(__scm->dev, ptr_sz, ptr, ptr_dma);
if (ret) {
dev_err(__scm->dev,
- "Assign memory protection call failed %d.\n", ret);
+ "Assign memory protection call failed %d\n", ret);
return -EINVAL;
}
diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c
index cdee0b45943d..4126be9e3216 100644
--- a/drivers/firmware/ti_sci.c
+++ b/drivers/firmware/ti_sci.c
@@ -635,6 +635,7 @@ fail:
/**
* ti_sci_cmd_get_device() - command to request for device managed by TISCI
+ * that can be shared with other hosts.
* @handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle
* @id: Device Identifier
*
@@ -642,12 +643,30 @@ fail:
* usage count by balancing get_device with put_device. No refcounting is
* managed by driver for that purpose.
*
- * NOTE: The request is for exclusive access for the processor.
- *
* Return: 0 if all went fine, else return appropriate error.
*/
static int ti_sci_cmd_get_device(const struct ti_sci_handle *handle, u32 id)
{
+ return ti_sci_set_device_state(handle, id, 0,
+ MSG_DEVICE_SW_STATE_ON);
+}
+
+/**
+ * ti_sci_cmd_get_device_exclusive() - command to request for device managed by
+ * TISCI that is exclusively owned by the
+ * requesting host.
+ * @handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle
+ * @id: Device Identifier
+ *
+ * Request for the device - NOTE: the client MUST maintain integrity of
+ * usage count by balancing get_device with put_device. No refcounting is
+ * managed by driver for that purpose.
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_cmd_get_device_exclusive(const struct ti_sci_handle *handle,
+ u32 id)
+{
return ti_sci_set_device_state(handle, id,
MSG_FLAG_DEVICE_EXCLUSIVE,
MSG_DEVICE_SW_STATE_ON);
@@ -666,6 +685,26 @@ static int ti_sci_cmd_get_device(const struct ti_sci_handle *handle, u32 id)
*/
static int ti_sci_cmd_idle_device(const struct ti_sci_handle *handle, u32 id)
{
+ return ti_sci_set_device_state(handle, id, 0,
+ MSG_DEVICE_SW_STATE_RETENTION);
+}
+
+/**
+ * ti_sci_cmd_idle_device_exclusive() - Command to idle a device managed by
+ * TISCI that is exclusively owned by
+ * requesting host.
+ * @handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle
+ * @id: Device Identifier
+ *
+ * Request for the device - NOTE: the client MUST maintain integrity of
+ * usage count by balancing get_device with put_device. No refcounting is
+ * managed by driver for that purpose.
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_cmd_idle_device_exclusive(const struct ti_sci_handle *handle,
+ u32 id)
+{
return ti_sci_set_device_state(handle, id,
MSG_FLAG_DEVICE_EXCLUSIVE,
MSG_DEVICE_SW_STATE_RETENTION);
@@ -2894,7 +2933,9 @@ static void ti_sci_setup_ops(struct ti_sci_info *info)
core_ops->reboot_device = ti_sci_cmd_core_reboot;
dops->get_device = ti_sci_cmd_get_device;
+ dops->get_device_exclusive = ti_sci_cmd_get_device_exclusive;
dops->idle_device = ti_sci_cmd_idle_device;
+ dops->idle_device_exclusive = ti_sci_cmd_idle_device_exclusive;
dops->put_device = ti_sci_cmd_put_device;
dops->is_valid = ti_sci_cmd_dev_is_valid;
diff --git a/drivers/firmware/turris-mox-rwtm.c b/drivers/firmware/turris-mox-rwtm.c
new file mode 100644
index 000000000000..72be58960e54
--- /dev/null
+++ b/drivers/firmware/turris-mox-rwtm.c
@@ -0,0 +1,384 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Turris Mox rWTM firmware driver
+ *
+ * Copyright (C) 2019 Marek Behun <marek.behun@nic.cz>
+ */
+
+#include <linux/armada-37xx-rwtm-mailbox.h>
+#include <linux/completion.h>
+#include <linux/dma-mapping.h>
+#include <linux/hw_random.h>
+#include <linux/mailbox_client.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define DRIVER_NAME "turris-mox-rwtm"
+
+/*
+ * The macros and constants below come from Turris Mox's rWTM firmware code.
+ * This firmware is open source and it's sources can be found at
+ * https://gitlab.labs.nic.cz/turris/mox-boot-builder/tree/master/wtmi.
+ */
+
+#define MBOX_STS_SUCCESS (0 << 30)
+#define MBOX_STS_FAIL (1 << 30)
+#define MBOX_STS_BADCMD (2 << 30)
+#define MBOX_STS_ERROR(s) ((s) & (3 << 30))
+#define MBOX_STS_VALUE(s) (((s) >> 10) & 0xfffff)
+#define MBOX_STS_CMD(s) ((s) & 0x3ff)
+
+enum mbox_cmd {
+ MBOX_CMD_GET_RANDOM = 1,
+ MBOX_CMD_BOARD_INFO = 2,
+ MBOX_CMD_ECDSA_PUB_KEY = 3,
+ MBOX_CMD_HASH = 4,
+ MBOX_CMD_SIGN = 5,
+ MBOX_CMD_VERIFY = 6,
+
+ MBOX_CMD_OTP_READ = 7,
+ MBOX_CMD_OTP_WRITE = 8,
+};
+
+struct mox_kobject;
+
+struct mox_rwtm {
+ struct device *dev;
+ struct mbox_client mbox_client;
+ struct mbox_chan *mbox;
+ struct mox_kobject *kobj;
+ struct hwrng hwrng;
+
+ struct armada_37xx_rwtm_rx_msg reply;
+
+ void *buf;
+ dma_addr_t buf_phys;
+
+ struct mutex busy;
+ struct completion cmd_done;
+
+ /* board information */
+ int has_board_info;
+ u64 serial_number;
+ int board_version, ram_size;
+ u8 mac_address1[6], mac_address2[6];
+
+ /* public key burned in eFuse */
+ int has_pubkey;
+ u8 pubkey[135];
+};
+
+struct mox_kobject {
+ struct kobject kobj;
+ struct mox_rwtm *rwtm;
+};
+
+static inline struct kobject *rwtm_to_kobj(struct mox_rwtm *rwtm)
+{
+ return &rwtm->kobj->kobj;
+}
+
+static inline struct mox_rwtm *to_rwtm(struct kobject *kobj)
+{
+ return container_of(kobj, struct mox_kobject, kobj)->rwtm;
+}
+
+static void mox_kobj_release(struct kobject *kobj)
+{
+ kfree(to_rwtm(kobj)->kobj);
+}
+
+static struct kobj_type mox_kobj_ktype = {
+ .release = mox_kobj_release,
+ .sysfs_ops = &kobj_sysfs_ops,
+};
+
+static int mox_kobj_create(struct mox_rwtm *rwtm)
+{
+ rwtm->kobj = kzalloc(sizeof(*rwtm->kobj), GFP_KERNEL);
+ if (!rwtm->kobj)
+ return -ENOMEM;
+
+ kobject_init(rwtm_to_kobj(rwtm), &mox_kobj_ktype);
+ if (kobject_add(rwtm_to_kobj(rwtm), firmware_kobj, "turris-mox-rwtm")) {
+ kobject_put(rwtm_to_kobj(rwtm));
+ return -ENXIO;
+ }
+
+ rwtm->kobj->rwtm = rwtm;
+
+ return 0;
+}
+
+#define MOX_ATTR_RO(name, format, cat) \
+static ssize_t \
+name##_show(struct kobject *kobj, struct kobj_attribute *a, \
+ char *buf) \
+{ \
+ struct mox_rwtm *rwtm = to_rwtm(kobj); \
+ if (!rwtm->has_##cat) \
+ return -ENODATA; \
+ return sprintf(buf, format, rwtm->name); \
+} \
+static struct kobj_attribute mox_attr_##name = __ATTR_RO(name)
+
+MOX_ATTR_RO(serial_number, "%016llX\n", board_info);
+MOX_ATTR_RO(board_version, "%i\n", board_info);
+MOX_ATTR_RO(ram_size, "%i\n", board_info);
+MOX_ATTR_RO(mac_address1, "%pM\n", board_info);
+MOX_ATTR_RO(mac_address2, "%pM\n", board_info);
+MOX_ATTR_RO(pubkey, "%s\n", pubkey);
+
+static int mox_get_status(enum mbox_cmd cmd, u32 retval)
+{
+ if (MBOX_STS_CMD(retval) != cmd ||
+ MBOX_STS_ERROR(retval) != MBOX_STS_SUCCESS)
+ return -EIO;
+ else if (MBOX_STS_ERROR(retval) == MBOX_STS_FAIL)
+ return -(int)MBOX_STS_VALUE(retval);
+ else
+ return MBOX_STS_VALUE(retval);
+}
+
+static const struct attribute *mox_rwtm_attrs[] = {
+ &mox_attr_serial_number.attr,
+ &mox_attr_board_version.attr,
+ &mox_attr_ram_size.attr,
+ &mox_attr_mac_address1.attr,
+ &mox_attr_mac_address2.attr,
+ &mox_attr_pubkey.attr,
+ NULL
+};
+
+static void mox_rwtm_rx_callback(struct mbox_client *cl, void *data)
+{
+ struct mox_rwtm *rwtm = dev_get_drvdata(cl->dev);
+ struct armada_37xx_rwtm_rx_msg *msg = data;
+
+ rwtm->reply = *msg;
+ complete(&rwtm->cmd_done);
+}
+
+static void reply_to_mac_addr(u8 *mac, u32 t1, u32 t2)
+{
+ mac[0] = t1 >> 8;
+ mac[1] = t1;
+ mac[2] = t2 >> 24;
+ mac[3] = t2 >> 16;
+ mac[4] = t2 >> 8;
+ mac[5] = t2;
+}
+
+static int mox_get_board_info(struct mox_rwtm *rwtm)
+{
+ struct armada_37xx_rwtm_tx_msg msg;
+ struct armada_37xx_rwtm_rx_msg *reply = &rwtm->reply;
+ int ret;
+
+ msg.command = MBOX_CMD_BOARD_INFO;
+ ret = mbox_send_message(rwtm->mbox, &msg);
+ if (ret < 0)
+ return ret;
+
+ ret = wait_for_completion_timeout(&rwtm->cmd_done, HZ / 2);
+ if (ret < 0)
+ return ret;
+
+ ret = mox_get_status(MBOX_CMD_BOARD_INFO, reply->retval);
+ if (ret < 0 && ret != -ENODATA) {
+ return ret;
+ } else if (ret == -ENODATA) {
+ dev_warn(rwtm->dev,
+ "Board does not have manufacturing information burned!\n");
+ } else {
+ rwtm->serial_number = reply->status[1];
+ rwtm->serial_number <<= 32;
+ rwtm->serial_number |= reply->status[0];
+ rwtm->board_version = reply->status[2];
+ rwtm->ram_size = reply->status[3];
+ reply_to_mac_addr(rwtm->mac_address1, reply->status[4],
+ reply->status[5]);
+ reply_to_mac_addr(rwtm->mac_address2, reply->status[6],
+ reply->status[7]);
+ rwtm->has_board_info = 1;
+
+ pr_info("Turris Mox serial number %016llX\n",
+ rwtm->serial_number);
+ pr_info(" board version %i\n", rwtm->board_version);
+ pr_info(" burned RAM size %i MiB\n", rwtm->ram_size);
+ }
+
+ msg.command = MBOX_CMD_ECDSA_PUB_KEY;
+ ret = mbox_send_message(rwtm->mbox, &msg);
+ if (ret < 0)
+ return ret;
+
+ ret = wait_for_completion_timeout(&rwtm->cmd_done, HZ / 2);
+ if (ret < 0)
+ return ret;
+
+ ret = mox_get_status(MBOX_CMD_ECDSA_PUB_KEY, reply->retval);
+ if (ret < 0 && ret != -ENODATA) {
+ return ret;
+ } else if (ret == -ENODATA) {
+ dev_warn(rwtm->dev, "Board has no public key burned!\n");
+ } else {
+ u32 *s = reply->status;
+
+ rwtm->has_pubkey = 1;
+ sprintf(rwtm->pubkey,
+ "%06x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x",
+ ret, s[0], s[1], s[2], s[3], s[4], s[5], s[6], s[7],
+ s[8], s[9], s[10], s[11], s[12], s[13], s[14], s[15]);
+ }
+
+ return 0;
+}
+
+static int mox_hwrng_read(struct hwrng *rng, void *data, size_t max, bool wait)
+{
+ struct mox_rwtm *rwtm = (struct mox_rwtm *) rng->priv;
+ struct armada_37xx_rwtm_tx_msg msg;
+ int ret;
+
+ if (max > 4096)
+ max = 4096;
+
+ msg.command = MBOX_CMD_GET_RANDOM;
+ msg.args[0] = 1;
+ msg.args[1] = rwtm->buf_phys;
+ msg.args[2] = (max + 3) & ~3;
+
+ if (!wait) {
+ if (!mutex_trylock(&rwtm->busy))
+ return -EBUSY;
+ } else {
+ mutex_lock(&rwtm->busy);
+ }
+
+ ret = mbox_send_message(rwtm->mbox, &msg);
+ if (ret < 0)
+ goto unlock_mutex;
+
+ ret = wait_for_completion_interruptible(&rwtm->cmd_done);
+ if (ret < 0)
+ goto unlock_mutex;
+
+ ret = mox_get_status(MBOX_CMD_GET_RANDOM, rwtm->reply.retval);
+ if (ret < 0)
+ goto unlock_mutex;
+
+ memcpy(data, rwtm->buf, max);
+ ret = max;
+
+unlock_mutex:
+ mutex_unlock(&rwtm->busy);
+ return ret;
+}
+
+static int turris_mox_rwtm_probe(struct platform_device *pdev)
+{
+ struct mox_rwtm *rwtm;
+ struct device *dev = &pdev->dev;
+ int ret;
+
+ rwtm = devm_kzalloc(dev, sizeof(*rwtm), GFP_KERNEL);
+ if (!rwtm)
+ return -ENOMEM;
+
+ rwtm->dev = dev;
+ rwtm->buf = dmam_alloc_coherent(dev, PAGE_SIZE, &rwtm->buf_phys,
+ GFP_KERNEL);
+ if (!rwtm->buf)
+ return -ENOMEM;
+
+ ret = mox_kobj_create(rwtm);
+ if (ret < 0) {
+ dev_err(dev, "Cannot create turris-mox-rwtm kobject!\n");
+ return ret;
+ }
+
+ ret = sysfs_create_files(rwtm_to_kobj(rwtm), mox_rwtm_attrs);
+ if (ret < 0) {
+ dev_err(dev, "Cannot create sysfs files!\n");
+ goto put_kobj;
+ }
+
+ platform_set_drvdata(pdev, rwtm);
+
+ mutex_init(&rwtm->busy);
+
+ rwtm->mbox_client.dev = dev;
+ rwtm->mbox_client.rx_callback = mox_rwtm_rx_callback;
+
+ rwtm->mbox = mbox_request_channel(&rwtm->mbox_client, 0);
+ if (IS_ERR(rwtm->mbox)) {
+ ret = PTR_ERR(rwtm->mbox);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Cannot request mailbox channel: %i\n",
+ ret);
+ goto remove_files;
+ }
+
+ init_completion(&rwtm->cmd_done);
+
+ ret = mox_get_board_info(rwtm);
+ if (ret < 0)
+ dev_warn(dev, "Cannot read board information: %i\n", ret);
+
+ rwtm->hwrng.name = DRIVER_NAME "_hwrng";
+ rwtm->hwrng.read = mox_hwrng_read;
+ rwtm->hwrng.priv = (unsigned long) rwtm;
+ rwtm->hwrng.quality = 1024;
+
+ ret = devm_hwrng_register(dev, &rwtm->hwrng);
+ if (ret < 0) {
+ dev_err(dev, "Cannot register HWRNG: %i\n", ret);
+ goto free_channel;
+ }
+
+ return 0;
+
+free_channel:
+ mbox_free_channel(rwtm->mbox);
+remove_files:
+ sysfs_remove_files(rwtm_to_kobj(rwtm), mox_rwtm_attrs);
+put_kobj:
+ kobject_put(rwtm_to_kobj(rwtm));
+ return ret;
+}
+
+static int turris_mox_rwtm_remove(struct platform_device *pdev)
+{
+ struct mox_rwtm *rwtm = platform_get_drvdata(pdev);
+
+ sysfs_remove_files(rwtm_to_kobj(rwtm), mox_rwtm_attrs);
+ kobject_put(rwtm_to_kobj(rwtm));
+ mbox_free_channel(rwtm->mbox);
+
+ return 0;
+}
+
+static const struct of_device_id turris_mox_rwtm_match[] = {
+ { .compatible = "cznic,turris-mox-rwtm", },
+ { },
+};
+
+MODULE_DEVICE_TABLE(of, turris_mox_rwtm_match);
+
+static struct platform_driver turris_mox_rwtm_driver = {
+ .probe = turris_mox_rwtm_probe,
+ .remove = turris_mox_rwtm_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ .of_match_table = turris_mox_rwtm_match,
+ },
+};
+module_platform_driver(turris_mox_rwtm_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Turris Mox rWTM firmware driver");
+MODULE_AUTHOR("Marek Behun <marek.behun@nic.cz>");
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 305b47ed4532..38e096e6925f 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -1453,6 +1453,15 @@ config GPIO_XRA1403
help
GPIO driver for EXAR XRA1403 16-bit SPI-based GPIO expander.
+config GPIO_MOXTET
+ tristate "Turris Mox Moxtet bus GPIO expander"
+ depends on MOXTET
+ help
+ Say yes here if you are building for the Turris Mox router.
+ This is the driver needed for configuring the GPIOs via the Moxtet
+ bus. For example the Mox module with SFP cage needs this driver
+ so that phylink can use corresponding GPIOs.
+
endmenu
menu "USB GPIO expanders"
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index f3e051fb50e6..d2fd19c15bae 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -92,6 +92,7 @@ obj-$(CONFIG_GPIO_ML_IOH) += gpio-ml-ioh.o
obj-$(CONFIG_GPIO_MLXBF) += gpio-mlxbf.o
obj-$(CONFIG_GPIO_MM_LANTIQ) += gpio-mm-lantiq.o
obj-$(CONFIG_GPIO_MOCKUP) += gpio-mockup.o
+obj-$(CONFIG_GPIO_MOXTET) += gpio-moxtet.o
obj-$(CONFIG_GPIO_MPC5200) += gpio-mpc5200.o
obj-$(CONFIG_GPIO_MPC8XXX) += gpio-mpc8xxx.o
obj-$(CONFIG_GPIO_MSIC) += gpio-msic.o
diff --git a/drivers/gpio/gpio-moxtet.c b/drivers/gpio/gpio-moxtet.c
new file mode 100644
index 000000000000..3fd729994a38
--- /dev/null
+++ b/drivers/gpio/gpio-moxtet.c
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Turris Mox Moxtet GPIO expander
+ *
+ * Copyright (C) 2018 Marek Behun <marek.behun@nic.cz>
+ */
+
+#include <linux/bitops.h>
+#include <linux/gpio/driver.h>
+#include <linux/moxtet.h>
+#include <linux/module.h>
+
+#define MOXTET_GPIO_NGPIOS 12
+#define MOXTET_GPIO_INPUTS 4
+
+struct moxtet_gpio_desc {
+ u16 in_mask;
+ u16 out_mask;
+};
+
+static const struct moxtet_gpio_desc descs[] = {
+ [TURRIS_MOX_MODULE_SFP] = {
+ .in_mask = GENMASK(2, 0),
+ .out_mask = GENMASK(5, 4),
+ },
+};
+
+struct moxtet_gpio_chip {
+ struct device *dev;
+ struct gpio_chip gpio_chip;
+ const struct moxtet_gpio_desc *desc;
+};
+
+static int moxtet_gpio_get_value(struct gpio_chip *gc, unsigned int offset)
+{
+ struct moxtet_gpio_chip *chip = gpiochip_get_data(gc);
+ int ret;
+
+ if (chip->desc->in_mask & BIT(offset)) {
+ ret = moxtet_device_read(chip->dev);
+ } else if (chip->desc->out_mask & BIT(offset)) {
+ ret = moxtet_device_written(chip->dev);
+ if (ret >= 0)
+ ret <<= MOXTET_GPIO_INPUTS;
+ } else {
+ return -EINVAL;
+ }
+
+ if (ret < 0)
+ return ret;
+
+ return !!(ret & BIT(offset));
+}
+
+static void moxtet_gpio_set_value(struct gpio_chip *gc, unsigned int offset,
+ int val)
+{
+ struct moxtet_gpio_chip *chip = gpiochip_get_data(gc);
+ int state;
+
+ state = moxtet_device_written(chip->dev);
+ if (state < 0)
+ return;
+
+ offset -= MOXTET_GPIO_INPUTS;
+
+ if (val)
+ state |= BIT(offset);
+ else
+ state &= ~BIT(offset);
+
+ moxtet_device_write(chip->dev, state);
+}
+
+static int moxtet_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
+{
+ struct moxtet_gpio_chip *chip = gpiochip_get_data(gc);
+
+ /* All lines are hard wired to be either input or output, not both. */
+ if (chip->desc->in_mask & BIT(offset))
+ return 1;
+ else if (chip->desc->out_mask & BIT(offset))
+ return 0;
+ else
+ return -EINVAL;
+}
+
+static int moxtet_gpio_direction_input(struct gpio_chip *gc,
+ unsigned int offset)
+{
+ struct moxtet_gpio_chip *chip = gpiochip_get_data(gc);
+
+ if (chip->desc->in_mask & BIT(offset))
+ return 0;
+ else if (chip->desc->out_mask & BIT(offset))
+ return -ENOTSUPP;
+ else
+ return -EINVAL;
+}
+
+static int moxtet_gpio_direction_output(struct gpio_chip *gc,
+ unsigned int offset, int val)
+{
+ struct moxtet_gpio_chip *chip = gpiochip_get_data(gc);
+
+ if (chip->desc->out_mask & BIT(offset))
+ moxtet_gpio_set_value(gc, offset, val);
+ else if (chip->desc->in_mask & BIT(offset))
+ return -ENOTSUPP;
+ else
+ return -EINVAL;
+
+ return 0;
+}
+
+static int moxtet_gpio_probe(struct device *dev)
+{
+ struct moxtet_gpio_chip *chip;
+ struct device_node *nc = dev->of_node;
+ int id;
+
+ id = to_moxtet_device(dev)->id;
+
+ if (id >= ARRAY_SIZE(descs)) {
+ dev_err(dev, "%pOF Moxtet device id 0x%x is not supported by gpio-moxtet driver\n",
+ nc, id);
+ return -ENOTSUPP;
+ }
+
+ chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ chip->dev = dev;
+ chip->gpio_chip.parent = dev;
+ chip->desc = &descs[id];
+
+ dev_set_drvdata(dev, chip);
+
+ chip->gpio_chip.label = dev_name(dev);
+ chip->gpio_chip.get_direction = moxtet_gpio_get_direction;
+ chip->gpio_chip.direction_input = moxtet_gpio_direction_input;
+ chip->gpio_chip.direction_output = moxtet_gpio_direction_output;
+ chip->gpio_chip.get = moxtet_gpio_get_value;
+ chip->gpio_chip.set = moxtet_gpio_set_value;
+ chip->gpio_chip.base = -1;
+
+ chip->gpio_chip.ngpio = MOXTET_GPIO_NGPIOS;
+
+ chip->gpio_chip.can_sleep = true;
+ chip->gpio_chip.owner = THIS_MODULE;
+
+ return devm_gpiochip_add_data(dev, &chip->gpio_chip, chip);
+}
+
+static const struct of_device_id moxtet_gpio_dt_ids[] = {
+ { .compatible = "cznic,moxtet-gpio", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, moxtet_gpio_dt_ids);
+
+static const enum turris_mox_module_id moxtet_gpio_module_table[] = {
+ TURRIS_MOX_MODULE_SFP,
+ 0,
+};
+
+static struct moxtet_driver moxtet_gpio_driver = {
+ .driver = {
+ .name = "moxtet-gpio",
+ .of_match_table = moxtet_gpio_dt_ids,
+ .probe = moxtet_gpio_probe,
+ },
+ .id_table = moxtet_gpio_module_table,
+};
+module_moxtet_driver(moxtet_gpio_driver);
+
+MODULE_AUTHOR("Marek Behun <marek.behun@nic.cz>");
+MODULE_DESCRIPTION("Turris Mox Moxtet GPIO expander");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/hwmon/scmi-hwmon.c b/drivers/hwmon/scmi-hwmon.c
index 0c93fc5ca762..8a7732c0bef3 100644
--- a/drivers/hwmon/scmi-hwmon.c
+++ b/drivers/hwmon/scmi-hwmon.c
@@ -72,7 +72,7 @@ static int scmi_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
const struct scmi_handle *h = scmi_sensors->handle;
sensor = *(scmi_sensors->info[type] + channel);
- ret = h->sensor_ops->reading_get(h, sensor->id, false, &value);
+ ret = h->sensor_ops->reading_get(h, sensor->id, &value);
if (ret)
return ret;
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 93a2d4deb27c..dc9dee55976b 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -151,7 +151,6 @@ config NET_NETX
To compile this driver as a module, choose M here. The module
will be called netx-eth.
-source "drivers/net/ethernet/nuvoton/Kconfig"
source "drivers/net/ethernet/nvidia/Kconfig"
source "drivers/net/ethernet/nxp/Kconfig"
source "drivers/net/ethernet/oki-semi/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index fb9155cffcff..4bc3c95562bf 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -65,7 +65,6 @@ obj-$(CONFIG_NET_VENDOR_NETERION) += neterion/
obj-$(CONFIG_NET_VENDOR_NETRONOME) += netronome/
obj-$(CONFIG_NET_VENDOR_NI) += ni/
obj-$(CONFIG_NET_NETX) += netx-eth.o
-obj-$(CONFIG_NET_VENDOR_NUVOTON) += nuvoton/
obj-$(CONFIG_NET_VENDOR_NVIDIA) += nvidia/
obj-$(CONFIG_LPC_ENET) += nxp/
obj-$(CONFIG_NET_VENDOR_OKI) += oki-semi/
diff --git a/drivers/net/ethernet/micrel/Kconfig b/drivers/net/ethernet/micrel/Kconfig
index 90a8c6bead56..b9c4d48e28e4 100644
--- a/drivers/net/ethernet/micrel/Kconfig
+++ b/drivers/net/ethernet/micrel/Kconfig
@@ -6,8 +6,7 @@
config NET_VENDOR_MICREL
bool "Micrel devices"
default y
- depends on (HAS_IOMEM && DMA_ENGINE) || SPI || PCI || HAS_IOMEM || \
- (ARM && ARCH_KS8695)
+ depends on (HAS_IOMEM && DMA_ENGINE) || SPI || PCI || HAS_IOMEM
---help---
If you have a network (Ethernet) card belonging to this class, say Y.
@@ -18,14 +17,6 @@ config NET_VENDOR_MICREL
if NET_VENDOR_MICREL
-config ARM_KS8695_ETHER
- tristate "KS8695 Ethernet support"
- depends on ARM && ARCH_KS8695
- select MII
- ---help---
- If you wish to compile a kernel for the KS8695 and want to
- use the internal ethernet then you should answer Y to this.
-
config KS8842
tristate "Micrel KSZ8841/42 with generic bus interface"
depends on HAS_IOMEM && DMA_ENGINE
diff --git a/drivers/net/ethernet/micrel/Makefile b/drivers/net/ethernet/micrel/Makefile
index 848fc1c5a5dc..6d8ac5527aef 100644
--- a/drivers/net/ethernet/micrel/Makefile
+++ b/drivers/net/ethernet/micrel/Makefile
@@ -3,7 +3,6 @@
# Makefile for the Micrel network device drivers.
#
-obj-$(CONFIG_ARM_KS8695_ETHER) += ks8695net.o
obj-$(CONFIG_KS8842) += ks8842.o
obj-$(CONFIG_KS8851) += ks8851.o
obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o
diff --git a/drivers/net/ethernet/micrel/ks8695net.c b/drivers/net/ethernet/micrel/ks8695net.c
deleted file mode 100644
index 1390ef5323a2..000000000000
--- a/drivers/net/ethernet/micrel/ks8695net.c
+++ /dev/null
@@ -1,1632 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Micrel KS8695 (Centaur) Ethernet.
- *
- * Copyright 2008 Simtec Electronics
- * Daniel Silverstone <dsilvers@simtec.co.uk>
- * Vincent Sanders <vince@simtec.co.uk>
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/interrupt.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/crc32.h>
-#include <linux/mii.h>
-#include <linux/ethtool.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-#include <asm/irq.h>
-
-#include <mach/regs-switch.h>
-#include <mach/regs-misc.h>
-#include <asm/mach/irq.h>
-#include <mach/regs-irq.h>
-
-#include "ks8695net.h"
-
-#define MODULENAME "ks8695_ether"
-#define MODULEVERSION "1.02"
-
-/*
- * Transmit and device reset timeout, default 5 seconds.
- */
-static int watchdog = 5000;
-
-/* Hardware structures */
-
-/**
- * struct rx_ring_desc - Receive descriptor ring element
- * @status: The status of the descriptor element (E.g. who owns it)
- * @length: The number of bytes in the block pointed to by data_ptr
- * @data_ptr: The physical address of the data block to receive into
- * @next_desc: The physical address of the next descriptor element.
- */
-struct rx_ring_desc {
- __le32 status;
- __le32 length;
- __le32 data_ptr;
- __le32 next_desc;
-};
-
-/**
- * struct tx_ring_desc - Transmit descriptor ring element
- * @owner: Who owns the descriptor
- * @status: The number of bytes in the block pointed to by data_ptr
- * @data_ptr: The physical address of the data block to receive into
- * @next_desc: The physical address of the next descriptor element.
- */
-struct tx_ring_desc {
- __le32 owner;
- __le32 status;
- __le32 data_ptr;
- __le32 next_desc;
-};
-
-/**
- * struct ks8695_skbuff - sk_buff wrapper for rx/tx rings.
- * @skb: The buffer in the ring
- * @dma_ptr: The mapped DMA pointer of the buffer
- * @length: The number of bytes mapped to dma_ptr
- */
-struct ks8695_skbuff {
- struct sk_buff *skb;
- dma_addr_t dma_ptr;
- u32 length;
-};
-
-/* Private device structure */
-
-#define MAX_TX_DESC 8
-#define MAX_TX_DESC_MASK 0x7
-#define MAX_RX_DESC 16
-#define MAX_RX_DESC_MASK 0xf
-
-/*napi_weight have better more than rx DMA buffers*/
-#define NAPI_WEIGHT 64
-
-#define MAX_RXBUF_SIZE 0x700
-
-#define TX_RING_DMA_SIZE (sizeof(struct tx_ring_desc) * MAX_TX_DESC)
-#define RX_RING_DMA_SIZE (sizeof(struct rx_ring_desc) * MAX_RX_DESC)
-#define RING_DMA_SIZE (TX_RING_DMA_SIZE + RX_RING_DMA_SIZE)
-
-/**
- * enum ks8695_dtype - Device type
- * @KS8695_DTYPE_WAN: This device is a WAN interface
- * @KS8695_DTYPE_LAN: This device is a LAN interface
- * @KS8695_DTYPE_HPNA: This device is an HPNA interface
- */
-enum ks8695_dtype {
- KS8695_DTYPE_WAN,
- KS8695_DTYPE_LAN,
- KS8695_DTYPE_HPNA,
-};
-
-/**
- * struct ks8695_priv - Private data for the KS8695 Ethernet
- * @in_suspend: Flag to indicate if we're suspending/resuming
- * @ndev: The net_device for this interface
- * @dev: The platform device object for this interface
- * @dtype: The type of this device
- * @io_regs: The ioremapped registers for this interface
- * @napi : Add support NAPI for Rx
- * @rx_irq_name: The textual name of the RX IRQ from the platform data
- * @tx_irq_name: The textual name of the TX IRQ from the platform data
- * @link_irq_name: The textual name of the link IRQ from the
- * platform data if available
- * @rx_irq: The IRQ number for the RX IRQ
- * @tx_irq: The IRQ number for the TX IRQ
- * @link_irq: The IRQ number for the link IRQ if available
- * @regs_req: The resource request for the registers region
- * @phyiface_req: The resource request for the phy/switch region
- * if available
- * @phyiface_regs: The ioremapped registers for the phy/switch if available
- * @ring_base: The base pointer of the dma coherent memory for the rings
- * @ring_base_dma: The DMA mapped equivalent of ring_base
- * @tx_ring: The pointer in ring_base of the TX ring
- * @tx_ring_used: The number of slots in the TX ring which are occupied
- * @tx_ring_next_slot: The next slot to fill in the TX ring
- * @tx_ring_dma: The DMA mapped equivalent of tx_ring
- * @tx_buffers: The sk_buff mappings for the TX ring
- * @txq_lock: A lock to protect the tx_buffers tx_ring_used etc variables
- * @rx_ring: The pointer in ring_base of the RX ring
- * @rx_ring_dma: The DMA mapped equivalent of rx_ring
- * @rx_buffers: The sk_buff mappings for the RX ring
- * @next_rx_desc_read: The next RX descriptor to read from on IRQ
- * @rx_lock: A lock to protect Rx irq function
- * @msg_enable: The flags for which messages to emit
- */
-struct ks8695_priv {
- int in_suspend;
- struct net_device *ndev;
- struct device *dev;
- enum ks8695_dtype dtype;
- void __iomem *io_regs;
-
- struct napi_struct napi;
-
- const char *rx_irq_name, *tx_irq_name, *link_irq_name;
- int rx_irq, tx_irq, link_irq;
-
- struct resource *regs_req, *phyiface_req;
- void __iomem *phyiface_regs;
-
- void *ring_base;
- dma_addr_t ring_base_dma;
-
- struct tx_ring_desc *tx_ring;
- int tx_ring_used;
- int tx_ring_next_slot;
- dma_addr_t tx_ring_dma;
- struct ks8695_skbuff tx_buffers[MAX_TX_DESC];
- spinlock_t txq_lock;
-
- struct rx_ring_desc *rx_ring;
- dma_addr_t rx_ring_dma;
- struct ks8695_skbuff rx_buffers[MAX_RX_DESC];
- int next_rx_desc_read;
- spinlock_t rx_lock;
-
- int msg_enable;
-};
-
-/* Register access */
-
-/**
- * ks8695_readreg - Read from a KS8695 ethernet register
- * @ksp: The device to read from
- * @reg: The register to read
- */
-static inline u32
-ks8695_readreg(struct ks8695_priv *ksp, int reg)
-{
- return readl(ksp->io_regs + reg);
-}
-
-/**
- * ks8695_writereg - Write to a KS8695 ethernet register
- * @ksp: The device to write to
- * @reg: The register to write
- * @value: The value to write to the register
- */
-static inline void
-ks8695_writereg(struct ks8695_priv *ksp, int reg, u32 value)
-{
- writel(value, ksp->io_regs + reg);
-}
-
-/* Utility functions */
-
-/**
- * ks8695_port_type - Retrieve port-type as user-friendly string
- * @ksp: The device to return the type for
- *
- * Returns a string indicating which of the WAN, LAN or HPNA
- * ports this device is likely to represent.
- */
-static const char *
-ks8695_port_type(struct ks8695_priv *ksp)
-{
- switch (ksp->dtype) {
- case KS8695_DTYPE_LAN:
- return "LAN";
- case KS8695_DTYPE_WAN:
- return "WAN";
- case KS8695_DTYPE_HPNA:
- return "HPNA";
- }
-
- return "UNKNOWN";
-}
-
-/**
- * ks8695_update_mac - Update the MAC registers in the device
- * @ksp: The device to update
- *
- * Updates the MAC registers in the KS8695 device from the address in the
- * net_device structure associated with this interface.
- */
-static void
-ks8695_update_mac(struct ks8695_priv *ksp)
-{
- /* Update the HW with the MAC from the net_device */
- struct net_device *ndev = ksp->ndev;
- u32 machigh, maclow;
-
- maclow = ((ndev->dev_addr[2] << 24) | (ndev->dev_addr[3] << 16) |
- (ndev->dev_addr[4] << 8) | (ndev->dev_addr[5] << 0));
- machigh = ((ndev->dev_addr[0] << 8) | (ndev->dev_addr[1] << 0));
-
- ks8695_writereg(ksp, KS8695_MAL, maclow);
- ks8695_writereg(ksp, KS8695_MAH, machigh);
-
-}
-
-/**
- * ks8695_refill_rxbuffers - Re-fill the RX buffer ring
- * @ksp: The device to refill
- *
- * Iterates the RX ring of the device looking for empty slots.
- * For each empty slot, we allocate and map a new SKB and give it
- * to the hardware.
- * This can be called from interrupt context safely.
- */
-static void
-ks8695_refill_rxbuffers(struct ks8695_priv *ksp)
-{
- /* Run around the RX ring, filling in any missing sk_buff's */
- int buff_n;
-
- for (buff_n = 0; buff_n < MAX_RX_DESC; ++buff_n) {
- if (!ksp->rx_buffers[buff_n].skb) {
- struct sk_buff *skb =
- netdev_alloc_skb(ksp->ndev, MAX_RXBUF_SIZE);
- dma_addr_t mapping;
-
- ksp->rx_buffers[buff_n].skb = skb;
- if (skb == NULL) {
- /* Failed to allocate one, perhaps
- * we'll try again later.
- */
- break;
- }
-
- mapping = dma_map_single(ksp->dev, skb->data,
- MAX_RXBUF_SIZE,
- DMA_FROM_DEVICE);
- if (unlikely(dma_mapping_error(ksp->dev, mapping))) {
- /* Failed to DMA map this SKB, try later */
- dev_kfree_skb_irq(skb);
- ksp->rx_buffers[buff_n].skb = NULL;
- break;
- }
- ksp->rx_buffers[buff_n].dma_ptr = mapping;
- ksp->rx_buffers[buff_n].length = MAX_RXBUF_SIZE;
-
- /* Record this into the DMA ring */
- ksp->rx_ring[buff_n].data_ptr = cpu_to_le32(mapping);
- ksp->rx_ring[buff_n].length =
- cpu_to_le32(MAX_RXBUF_SIZE);
-
- wmb();
-
- /* And give ownership over to the hardware */
- ksp->rx_ring[buff_n].status = cpu_to_le32(RDES_OWN);
- }
- }
-}
-
-/* Maximum number of multicast addresses which the KS8695 HW supports */
-#define KS8695_NR_ADDRESSES 16
-
-/**
- * ks8695_init_partial_multicast - Init the mcast addr registers
- * @ksp: The device to initialise
- * @addr: The multicast address list to use
- * @nr_addr: The number of addresses in the list
- *
- * This routine is a helper for ks8695_set_multicast - it writes
- * the additional-address registers in the KS8695 ethernet device
- * and cleans up any others left behind.
- */
-static void
-ks8695_init_partial_multicast(struct ks8695_priv *ksp,
- struct net_device *ndev)
-{
- u32 low, high;
- int i;
- struct netdev_hw_addr *ha;
-
- i = 0;
- netdev_for_each_mc_addr(ha, ndev) {
- /* Ran out of space in chip? */
- BUG_ON(i == KS8695_NR_ADDRESSES);
-
- low = (ha->addr[2] << 24) | (ha->addr[3] << 16) |
- (ha->addr[4] << 8) | (ha->addr[5]);
- high = (ha->addr[0] << 8) | (ha->addr[1]);
-
- ks8695_writereg(ksp, KS8695_AAL_(i), low);
- ks8695_writereg(ksp, KS8695_AAH_(i), AAH_E | high);
- i++;
- }
-
- /* Clear the remaining Additional Station Addresses */
- for (; i < KS8695_NR_ADDRESSES; i++) {
- ks8695_writereg(ksp, KS8695_AAL_(i), 0);
- ks8695_writereg(ksp, KS8695_AAH_(i), 0);
- }
-}
-
-/* Interrupt handling */
-
-/**
- * ks8695_tx_irq - Transmit IRQ handler
- * @irq: The IRQ which went off (ignored)
- * @dev_id: The net_device for the interrupt
- *
- * Process the TX ring, clearing out any transmitted slots.
- * Allows the net_device to pass us new packets once slots are
- * freed.
- */
-static irqreturn_t
-ks8695_tx_irq(int irq, void *dev_id)
-{
- struct net_device *ndev = (struct net_device *)dev_id;
- struct ks8695_priv *ksp = netdev_priv(ndev);
- int buff_n;
-
- for (buff_n = 0; buff_n < MAX_TX_DESC; ++buff_n) {
- if (ksp->tx_buffers[buff_n].skb &&
- !(ksp->tx_ring[buff_n].owner & cpu_to_le32(TDES_OWN))) {
- rmb();
- /* An SKB which is not owned by HW is present */
- /* Update the stats for the net_device */
- ndev->stats.tx_packets++;
- ndev->stats.tx_bytes += ksp->tx_buffers[buff_n].length;
-
- /* Free the packet from the ring */
- ksp->tx_ring[buff_n].data_ptr = 0;
-
- /* Free the sk_buff */
- dma_unmap_single(ksp->dev,
- ksp->tx_buffers[buff_n].dma_ptr,
- ksp->tx_buffers[buff_n].length,
- DMA_TO_DEVICE);
- dev_consume_skb_irq(ksp->tx_buffers[buff_n].skb);
- ksp->tx_buffers[buff_n].skb = NULL;
- ksp->tx_ring_used--;
- }
- }
-
- netif_wake_queue(ndev);
-
- return IRQ_HANDLED;
-}
-
-/**
- * ks8695_get_rx_enable_bit - Get rx interrupt enable/status bit
- * @ksp: Private data for the KS8695 Ethernet
- *
- * For KS8695 document:
- * Interrupt Enable Register (offset 0xE204)
- * Bit29 : WAN MAC Receive Interrupt Enable
- * Bit16 : LAN MAC Receive Interrupt Enable
- * Interrupt Status Register (Offset 0xF208)
- * Bit29: WAN MAC Receive Status
- * Bit16: LAN MAC Receive Status
- * So, this Rx interrupt enable/status bit number is equal
- * as Rx IRQ number.
- */
-static inline u32 ks8695_get_rx_enable_bit(struct ks8695_priv *ksp)
-{
- return ksp->rx_irq;
-}
-
-/**
- * ks8695_rx_irq - Receive IRQ handler
- * @irq: The IRQ which went off (ignored)
- * @dev_id: The net_device for the interrupt
- *
- * Inform NAPI that packet reception needs to be scheduled
- */
-
-static irqreturn_t
-ks8695_rx_irq(int irq, void *dev_id)
-{
- struct net_device *ndev = (struct net_device *)dev_id;
- struct ks8695_priv *ksp = netdev_priv(ndev);
-
- spin_lock(&ksp->rx_lock);
-
- if (napi_schedule_prep(&ksp->napi)) {
- unsigned long status = readl(KS8695_IRQ_VA + KS8695_INTEN);
- unsigned long mask_bit = 1 << ks8695_get_rx_enable_bit(ksp);
- /*disable rx interrupt*/
- status &= ~mask_bit;
- writel(status , KS8695_IRQ_VA + KS8695_INTEN);
- __napi_schedule(&ksp->napi);
- }
-
- spin_unlock(&ksp->rx_lock);
- return IRQ_HANDLED;
-}
-
-/**
- * ks8695_rx - Receive packets called by NAPI poll method
- * @ksp: Private data for the KS8695 Ethernet
- * @budget: Number of packets allowed to process
- */
-static int ks8695_rx(struct ks8695_priv *ksp, int budget)
-{
- struct net_device *ndev = ksp->ndev;
- struct sk_buff *skb;
- int buff_n;
- u32 flags;
- int pktlen;
- int received = 0;
-
- buff_n = ksp->next_rx_desc_read;
- while (received < budget
- && ksp->rx_buffers[buff_n].skb
- && (!(ksp->rx_ring[buff_n].status &
- cpu_to_le32(RDES_OWN)))) {
- rmb();
- flags = le32_to_cpu(ksp->rx_ring[buff_n].status);
-
- /* Found an SKB which we own, this means we
- * received a packet
- */
- if ((flags & (RDES_FS | RDES_LS)) !=
- (RDES_FS | RDES_LS)) {
- /* This packet is not the first and
- * the last segment. Therefore it is
- * a "spanning" packet and we can't
- * handle it
- */
- goto rx_failure;
- }
-
- if (flags & (RDES_ES | RDES_RE)) {
- /* It's an error packet */
- ndev->stats.rx_errors++;
- if (flags & RDES_TL)
- ndev->stats.rx_length_errors++;
- if (flags & RDES_RF)
- ndev->stats.rx_length_errors++;
- if (flags & RDES_CE)
- ndev->stats.rx_crc_errors++;
- if (flags & RDES_RE)
- ndev->stats.rx_missed_errors++;
-
- goto rx_failure;
- }
-
- pktlen = flags & RDES_FLEN;
- pktlen -= 4; /* Drop the CRC */
-
- /* Retrieve the sk_buff */
- skb = ksp->rx_buffers[buff_n].skb;
-
- /* Clear it from the ring */
- ksp->rx_buffers[buff_n].skb = NULL;
- ksp->rx_ring[buff_n].data_ptr = 0;
-
- /* Unmap the SKB */
- dma_unmap_single(ksp->dev,
- ksp->rx_buffers[buff_n].dma_ptr,
- ksp->rx_buffers[buff_n].length,
- DMA_FROM_DEVICE);
-
- /* Relinquish the SKB to the network layer */
- skb_put(skb, pktlen);
- skb->protocol = eth_type_trans(skb, ndev);
- napi_gro_receive(&ksp->napi, skb);
-
- /* Record stats */
- ndev->stats.rx_packets++;
- ndev->stats.rx_bytes += pktlen;
- goto rx_finished;
-
-rx_failure:
- /* This ring entry is an error, but we can
- * re-use the skb
- */
- /* Give the ring entry back to the hardware */
- ksp->rx_ring[buff_n].status = cpu_to_le32(RDES_OWN);
-rx_finished:
- received++;
- buff_n = (buff_n + 1) & MAX_RX_DESC_MASK;
- }
-
- /* And note which RX descriptor we last did */
- ksp->next_rx_desc_read = buff_n;
-
- /* And refill the buffers */
- ks8695_refill_rxbuffers(ksp);
-
- /* Kick the RX DMA engine, in case it became suspended */
- ks8695_writereg(ksp, KS8695_DRSC, 0);
-
- return received;
-}
-
-
-/**
- * ks8695_poll - Receive packet by NAPI poll method
- * @ksp: Private data for the KS8695 Ethernet
- * @budget: The remaining number packets for network subsystem
- *
- * Invoked by the network core when it requests for new
- * packets from the driver
- */
-static int ks8695_poll(struct napi_struct *napi, int budget)
-{
- struct ks8695_priv *ksp = container_of(napi, struct ks8695_priv, napi);
- unsigned long isr = readl(KS8695_IRQ_VA + KS8695_INTEN);
- unsigned long mask_bit = 1 << ks8695_get_rx_enable_bit(ksp);
- int work_done;
-
- work_done = ks8695_rx(ksp, budget);
-
- if (work_done < budget && napi_complete_done(napi, work_done)) {
- unsigned long flags;
-
- spin_lock_irqsave(&ksp->rx_lock, flags);
- /* enable rx interrupt */
- writel(isr | mask_bit, KS8695_IRQ_VA + KS8695_INTEN);
- spin_unlock_irqrestore(&ksp->rx_lock, flags);
- }
- return work_done;
-}
-
-/**
- * ks8695_link_irq - Link change IRQ handler
- * @irq: The IRQ which went off (ignored)
- * @dev_id: The net_device for the interrupt
- *
- * The WAN interface can generate an IRQ when the link changes,
- * report this to the net layer and the user.
- */
-static irqreturn_t
-ks8695_link_irq(int irq, void *dev_id)
-{
- struct net_device *ndev = (struct net_device *)dev_id;
- struct ks8695_priv *ksp = netdev_priv(ndev);
- u32 ctrl;
-
- ctrl = readl(ksp->phyiface_regs + KS8695_WMC);
- if (ctrl & WMC_WLS) {
- netif_carrier_on(ndev);
- if (netif_msg_link(ksp))
- dev_info(ksp->dev,
- "%s: Link is now up (10%sMbps/%s-duplex)\n",
- ndev->name,
- (ctrl & WMC_WSS) ? "0" : "",
- (ctrl & WMC_WDS) ? "Full" : "Half");
- } else {
- netif_carrier_off(ndev);
- if (netif_msg_link(ksp))
- dev_info(ksp->dev, "%s: Link is now down.\n",
- ndev->name);
- }
-
- return IRQ_HANDLED;
-}
-
-
-/* KS8695 Device functions */
-
-/**
- * ks8695_reset - Reset a KS8695 ethernet interface
- * @ksp: The interface to reset
- *
- * Perform an engine reset of the interface and re-program it
- * with sensible defaults.
- */
-static void
-ks8695_reset(struct ks8695_priv *ksp)
-{
- int reset_timeout = watchdog;
- /* Issue the reset via the TX DMA control register */
- ks8695_writereg(ksp, KS8695_DTXC, DTXC_TRST);
- while (reset_timeout--) {
- if (!(ks8695_readreg(ksp, KS8695_DTXC) & DTXC_TRST))
- break;
- msleep(1);
- }
-
- if (reset_timeout < 0) {
- dev_crit(ksp->dev,
- "Timeout waiting for DMA engines to reset\n");
- /* And blithely carry on */
- }
-
- /* Definitely wait long enough before attempting to program
- * the engines
- */
- msleep(10);
-
- /* RX: unicast and broadcast */
- ks8695_writereg(ksp, KS8695_DRXC, DRXC_RU | DRXC_RB);
- /* TX: pad and add CRC */
- ks8695_writereg(ksp, KS8695_DTXC, DTXC_TEP | DTXC_TAC);
-}
-
-/**
- * ks8695_shutdown - Shut down a KS8695 ethernet interface
- * @ksp: The interface to shut down
- *
- * This disables packet RX/TX, cleans up IRQs, drains the rings,
- * and basically places the interface into a clean shutdown
- * state.
- */
-static void
-ks8695_shutdown(struct ks8695_priv *ksp)
-{
- u32 ctrl;
- int buff_n;
-
- /* Disable packet transmission */
- ctrl = ks8695_readreg(ksp, KS8695_DTXC);
- ks8695_writereg(ksp, KS8695_DTXC, ctrl & ~DTXC_TE);
-
- /* Disable packet reception */
- ctrl = ks8695_readreg(ksp, KS8695_DRXC);
- ks8695_writereg(ksp, KS8695_DRXC, ctrl & ~DRXC_RE);
-
- /* Release the IRQs */
- free_irq(ksp->rx_irq, ksp->ndev);
- free_irq(ksp->tx_irq, ksp->ndev);
- if (ksp->link_irq != -1)
- free_irq(ksp->link_irq, ksp->ndev);
-
- /* Throw away any pending TX packets */
- for (buff_n = 0; buff_n < MAX_TX_DESC; ++buff_n) {
- if (ksp->tx_buffers[buff_n].skb) {
- /* Remove this SKB from the TX ring */
- ksp->tx_ring[buff_n].owner = 0;
- ksp->tx_ring[buff_n].status = 0;
- ksp->tx_ring[buff_n].data_ptr = 0;
-
- /* Unmap and bin this SKB */
- dma_unmap_single(ksp->dev,
- ksp->tx_buffers[buff_n].dma_ptr,
- ksp->tx_buffers[buff_n].length,
- DMA_TO_DEVICE);
- dev_kfree_skb_irq(ksp->tx_buffers[buff_n].skb);
- ksp->tx_buffers[buff_n].skb = NULL;
- }
- }
-
- /* Purge the RX buffers */
- for (buff_n = 0; buff_n < MAX_RX_DESC; ++buff_n) {
- if (ksp->rx_buffers[buff_n].skb) {
- /* Remove the SKB from the RX ring */
- ksp->rx_ring[buff_n].status = 0;
- ksp->rx_ring[buff_n].data_ptr = 0;
-
- /* Unmap and bin the SKB */
- dma_unmap_single(ksp->dev,
- ksp->rx_buffers[buff_n].dma_ptr,
- ksp->rx_buffers[buff_n].length,
- DMA_FROM_DEVICE);
- dev_kfree_skb_irq(ksp->rx_buffers[buff_n].skb);
- ksp->rx_buffers[buff_n].skb = NULL;
- }
- }
-}
-
-
-/**
- * ks8695_setup_irq - IRQ setup helper function
- * @irq: The IRQ number to claim
- * @irq_name: The name to give the IRQ claimant
- * @handler: The function to call to handle the IRQ
- * @ndev: The net_device to pass in as the dev_id argument to the handler
- *
- * Return 0 on success.
- */
-static int
-ks8695_setup_irq(int irq, const char *irq_name,
- irq_handler_t handler, struct net_device *ndev)
-{
- int ret;
-
- ret = request_irq(irq, handler, IRQF_SHARED, irq_name, ndev);
-
- if (ret) {
- dev_err(&ndev->dev, "failure to request IRQ %d\n", irq);
- return ret;
- }
-
- return 0;
-}
-
-/**
- * ks8695_init_net - Initialise a KS8695 ethernet interface
- * @ksp: The interface to initialise
- *
- * This routine fills the RX ring, initialises the DMA engines,
- * allocates the IRQs and then starts the packet TX and RX
- * engines.
- */
-static int
-ks8695_init_net(struct ks8695_priv *ksp)
-{
- int ret;
- u32 ctrl;
-
- ks8695_refill_rxbuffers(ksp);
-
- /* Initialise the DMA engines */
- ks8695_writereg(ksp, KS8695_RDLB, (u32) ksp->rx_ring_dma);
- ks8695_writereg(ksp, KS8695_TDLB, (u32) ksp->tx_ring_dma);
-
- /* Request the IRQs */
- ret = ks8695_setup_irq(ksp->rx_irq, ksp->rx_irq_name,
- ks8695_rx_irq, ksp->ndev);
- if (ret)
- return ret;
- ret = ks8695_setup_irq(ksp->tx_irq, ksp->tx_irq_name,
- ks8695_tx_irq, ksp->ndev);
- if (ret)
- return ret;
- if (ksp->link_irq != -1) {
- ret = ks8695_setup_irq(ksp->link_irq, ksp->link_irq_name,
- ks8695_link_irq, ksp->ndev);
- if (ret)
- return ret;
- }
-
- /* Set up the ring indices */
- ksp->next_rx_desc_read = 0;
- ksp->tx_ring_next_slot = 0;
- ksp->tx_ring_used = 0;
-
- /* Bring up transmission */
- ctrl = ks8695_readreg(ksp, KS8695_DTXC);
- /* Enable packet transmission */
- ks8695_writereg(ksp, KS8695_DTXC, ctrl | DTXC_TE);
-
- /* Bring up the reception */
- ctrl = ks8695_readreg(ksp, KS8695_DRXC);
- /* Enable packet reception */
- ks8695_writereg(ksp, KS8695_DRXC, ctrl | DRXC_RE);
- /* And start the DMA engine */
- ks8695_writereg(ksp, KS8695_DRSC, 0);
-
- /* All done */
- return 0;
-}
-
-/**
- * ks8695_release_device - HW resource release for KS8695 e-net
- * @ksp: The device to be freed
- *
- * This unallocates io memory regions, dma-coherent regions etc
- * which were allocated in ks8695_probe.
- */
-static void
-ks8695_release_device(struct ks8695_priv *ksp)
-{
- /* Unmap the registers */
- iounmap(ksp->io_regs);
- if (ksp->phyiface_regs)
- iounmap(ksp->phyiface_regs);
-
- /* And release the request */
- release_resource(ksp->regs_req);
- kfree(ksp->regs_req);
- if (ksp->phyiface_req) {
- release_resource(ksp->phyiface_req);
- kfree(ksp->phyiface_req);
- }
-
- /* Free the ring buffers */
- dma_free_coherent(ksp->dev, RING_DMA_SIZE,
- ksp->ring_base, ksp->ring_base_dma);
-}
-
-/* Ethtool support */
-
-/**
- * ks8695_get_msglevel - Get the messages enabled for emission
- * @ndev: The network device to read from
- */
-static u32
-ks8695_get_msglevel(struct net_device *ndev)
-{
- struct ks8695_priv *ksp = netdev_priv(ndev);
-
- return ksp->msg_enable;
-}
-
-/**
- * ks8695_set_msglevel - Set the messages enabled for emission
- * @ndev: The network device to configure
- * @value: The messages to set for emission
- */
-static void
-ks8695_set_msglevel(struct net_device *ndev, u32 value)
-{
- struct ks8695_priv *ksp = netdev_priv(ndev);
-
- ksp->msg_enable = value;
-}
-
-/**
- * ks8695_wan_get_link_ksettings - Get device-specific settings.
- * @ndev: The network device to read settings from
- * @cmd: The ethtool structure to read into
- */
-static int
-ks8695_wan_get_link_ksettings(struct net_device *ndev,
- struct ethtool_link_ksettings *cmd)
-{
- struct ks8695_priv *ksp = netdev_priv(ndev);
- u32 ctrl;
- u32 supported, advertising;
-
- /* All ports on the KS8695 support these... */
- supported = (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
- SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
- SUPPORTED_TP | SUPPORTED_MII);
-
- advertising = ADVERTISED_TP | ADVERTISED_MII;
- cmd->base.port = PORT_MII;
- supported |= (SUPPORTED_Autoneg | SUPPORTED_Pause);
- cmd->base.phy_address = 0;
-
- ctrl = readl(ksp->phyiface_regs + KS8695_WMC);
- if ((ctrl & WMC_WAND) == 0) {
- /* auto-negotiation is enabled */
- advertising |= ADVERTISED_Autoneg;
- if (ctrl & WMC_WANA100F)
- advertising |= ADVERTISED_100baseT_Full;
- if (ctrl & WMC_WANA100H)
- advertising |= ADVERTISED_100baseT_Half;
- if (ctrl & WMC_WANA10F)
- advertising |= ADVERTISED_10baseT_Full;
- if (ctrl & WMC_WANA10H)
- advertising |= ADVERTISED_10baseT_Half;
- if (ctrl & WMC_WANAP)
- advertising |= ADVERTISED_Pause;
- cmd->base.autoneg = AUTONEG_ENABLE;
-
- cmd->base.speed = (ctrl & WMC_WSS) ? SPEED_100 : SPEED_10;
- cmd->base.duplex = (ctrl & WMC_WDS) ?
- DUPLEX_FULL : DUPLEX_HALF;
- } else {
- /* auto-negotiation is disabled */
- cmd->base.autoneg = AUTONEG_DISABLE;
-
- cmd->base.speed = (ctrl & WMC_WANF100) ?
- SPEED_100 : SPEED_10;
- cmd->base.duplex = (ctrl & WMC_WANFF) ?
- DUPLEX_FULL : DUPLEX_HALF;
- }
-
- ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
- supported);
- ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
- advertising);
-
- return 0;
-}
-
-/**
- * ks8695_wan_set_link_ksettings - Set device-specific settings.
- * @ndev: The network device to configure
- * @cmd: The settings to configure
- */
-static int
-ks8695_wan_set_link_ksettings(struct net_device *ndev,
- const struct ethtool_link_ksettings *cmd)
-{
- struct ks8695_priv *ksp = netdev_priv(ndev);
- u32 ctrl;
- u32 advertising;
-
- ethtool_convert_link_mode_to_legacy_u32(&advertising,
- cmd->link_modes.advertising);
-
- if ((cmd->base.speed != SPEED_10) && (cmd->base.speed != SPEED_100))
- return -EINVAL;
- if ((cmd->base.duplex != DUPLEX_HALF) &&
- (cmd->base.duplex != DUPLEX_FULL))
- return -EINVAL;
- if (cmd->base.port != PORT_MII)
- return -EINVAL;
- if ((cmd->base.autoneg != AUTONEG_DISABLE) &&
- (cmd->base.autoneg != AUTONEG_ENABLE))
- return -EINVAL;
-
- if (cmd->base.autoneg == AUTONEG_ENABLE) {
- if ((advertising & (ADVERTISED_10baseT_Half |
- ADVERTISED_10baseT_Full |
- ADVERTISED_100baseT_Half |
- ADVERTISED_100baseT_Full)) == 0)
- return -EINVAL;
-
- ctrl = readl(ksp->phyiface_regs + KS8695_WMC);
-
- ctrl &= ~(WMC_WAND | WMC_WANA100F | WMC_WANA100H |
- WMC_WANA10F | WMC_WANA10H);
- if (advertising & ADVERTISED_100baseT_Full)
- ctrl |= WMC_WANA100F;
- if (advertising & ADVERTISED_100baseT_Half)
- ctrl |= WMC_WANA100H;
- if (advertising & ADVERTISED_10baseT_Full)
- ctrl |= WMC_WANA10F;
- if (advertising & ADVERTISED_10baseT_Half)
- ctrl |= WMC_WANA10H;
-
- /* force a re-negotiation */
- ctrl |= WMC_WANR;
- writel(ctrl, ksp->phyiface_regs + KS8695_WMC);
- } else {
- ctrl = readl(ksp->phyiface_regs + KS8695_WMC);
-
- /* disable auto-negotiation */
- ctrl |= WMC_WAND;
- ctrl &= ~(WMC_WANF100 | WMC_WANFF);
-
- if (cmd->base.speed == SPEED_100)
- ctrl |= WMC_WANF100;
- if (cmd->base.duplex == DUPLEX_FULL)
- ctrl |= WMC_WANFF;
-
- writel(ctrl, ksp->phyiface_regs + KS8695_WMC);
- }
-
- return 0;
-}
-
-/**
- * ks8695_wan_nwayreset - Restart the autonegotiation on the port.
- * @ndev: The network device to restart autoneotiation on
- */
-static int
-ks8695_wan_nwayreset(struct net_device *ndev)
-{
- struct ks8695_priv *ksp = netdev_priv(ndev);
- u32 ctrl;
-
- ctrl = readl(ksp->phyiface_regs + KS8695_WMC);
-
- if ((ctrl & WMC_WAND) == 0)
- writel(ctrl | WMC_WANR,
- ksp->phyiface_regs + KS8695_WMC);
- else
- /* auto-negotiation not enabled */
- return -EINVAL;
-
- return 0;
-}
-
-/**
- * ks8695_wan_get_pause - Retrieve network pause/flow-control advertising
- * @ndev: The device to retrieve settings from
- * @param: The structure to fill out with the information
- */
-static void
-ks8695_wan_get_pause(struct net_device *ndev, struct ethtool_pauseparam *param)
-{
- struct ks8695_priv *ksp = netdev_priv(ndev);
- u32 ctrl;
-
- ctrl = readl(ksp->phyiface_regs + KS8695_WMC);
-
- /* advertise Pause */
- param->autoneg = (ctrl & WMC_WANAP);
-
- /* current Rx Flow-control */
- ctrl = ks8695_readreg(ksp, KS8695_DRXC);
- param->rx_pause = (ctrl & DRXC_RFCE);
-
- /* current Tx Flow-control */
- ctrl = ks8695_readreg(ksp, KS8695_DTXC);
- param->tx_pause = (ctrl & DTXC_TFCE);
-}
-
-/**
- * ks8695_get_drvinfo - Retrieve driver information
- * @ndev: The network device to retrieve info about
- * @info: The info structure to fill out.
- */
-static void
-ks8695_get_drvinfo(struct net_device *ndev, struct ethtool_drvinfo *info)
-{
- strlcpy(info->driver, MODULENAME, sizeof(info->driver));
- strlcpy(info->version, MODULEVERSION, sizeof(info->version));
- strlcpy(info->bus_info, dev_name(ndev->dev.parent),
- sizeof(info->bus_info));
-}
-
-static const struct ethtool_ops ks8695_ethtool_ops = {
- .get_msglevel = ks8695_get_msglevel,
- .set_msglevel = ks8695_set_msglevel,
- .get_drvinfo = ks8695_get_drvinfo,
-};
-
-static const struct ethtool_ops ks8695_wan_ethtool_ops = {
- .get_msglevel = ks8695_get_msglevel,
- .set_msglevel = ks8695_set_msglevel,
- .nway_reset = ks8695_wan_nwayreset,
- .get_link = ethtool_op_get_link,
- .get_pauseparam = ks8695_wan_get_pause,
- .get_drvinfo = ks8695_get_drvinfo,
- .get_link_ksettings = ks8695_wan_get_link_ksettings,
- .set_link_ksettings = ks8695_wan_set_link_ksettings,
-};
-
-/* Network device interface functions */
-
-/**
- * ks8695_set_mac - Update MAC in net dev and HW
- * @ndev: The network device to update
- * @addr: The new MAC address to set
- */
-static int
-ks8695_set_mac(struct net_device *ndev, void *addr)
-{
- struct ks8695_priv *ksp = netdev_priv(ndev);
- struct sockaddr *address = addr;
-
- if (!is_valid_ether_addr(address->sa_data))
- return -EADDRNOTAVAIL;
-
- memcpy(ndev->dev_addr, address->sa_data, ndev->addr_len);
-
- ks8695_update_mac(ksp);
-
- dev_dbg(ksp->dev, "%s: Updated MAC address to %pM\n",
- ndev->name, ndev->dev_addr);
-
- return 0;
-}
-
-/**
- * ks8695_set_multicast - Set up the multicast behaviour of the interface
- * @ndev: The net_device to configure
- *
- * This routine, called by the net layer, configures promiscuity
- * and multicast reception behaviour for the interface.
- */
-static void
-ks8695_set_multicast(struct net_device *ndev)
-{
- struct ks8695_priv *ksp = netdev_priv(ndev);
- u32 ctrl;
-
- ctrl = ks8695_readreg(ksp, KS8695_DRXC);
-
- if (ndev->flags & IFF_PROMISC) {
- /* enable promiscuous mode */
- ctrl |= DRXC_RA;
- } else if (ndev->flags & ~IFF_PROMISC) {
- /* disable promiscuous mode */
- ctrl &= ~DRXC_RA;
- }
-
- if (ndev->flags & IFF_ALLMULTI) {
- /* enable all multicast mode */
- ctrl |= DRXC_RM;
- } else if (netdev_mc_count(ndev) > KS8695_NR_ADDRESSES) {
- /* more specific multicast addresses than can be
- * handled in hardware
- */
- ctrl |= DRXC_RM;
- } else {
- /* enable specific multicasts */
- ctrl &= ~DRXC_RM;
- ks8695_init_partial_multicast(ksp, ndev);
- }
-
- ks8695_writereg(ksp, KS8695_DRXC, ctrl);
-}
-
-/**
- * ks8695_timeout - Handle a network tx/rx timeout.
- * @ndev: The net_device which timed out.
- *
- * A network transaction timed out, reset the device.
- */
-static void
-ks8695_timeout(struct net_device *ndev)
-{
- struct ks8695_priv *ksp = netdev_priv(ndev);
-
- netif_stop_queue(ndev);
- ks8695_shutdown(ksp);
-
- ks8695_reset(ksp);
-
- ks8695_update_mac(ksp);
-
- /* We ignore the return from this since it managed to init
- * before it probably will be okay to init again.
- */
- ks8695_init_net(ksp);
-
- /* Reconfigure promiscuity etc */
- ks8695_set_multicast(ndev);
-
- /* And start the TX queue once more */
- netif_start_queue(ndev);
-}
-
-/**
- * ks8695_start_xmit - Start a packet transmission
- * @skb: The packet to transmit
- * @ndev: The network device to send the packet on
- *
- * This routine, called by the net layer, takes ownership of the
- * sk_buff and adds it to the TX ring. It then kicks the TX DMA
- * engine to ensure transmission begins.
- */
-static netdev_tx_t
-ks8695_start_xmit(struct sk_buff *skb, struct net_device *ndev)
-{
- struct ks8695_priv *ksp = netdev_priv(ndev);
- int buff_n;
- dma_addr_t dmap;
-
- spin_lock_irq(&ksp->txq_lock);
-
- if (ksp->tx_ring_used == MAX_TX_DESC) {
- /* Somehow we got entered when we have no room */
- spin_unlock_irq(&ksp->txq_lock);
- return NETDEV_TX_BUSY;
- }
-
- buff_n = ksp->tx_ring_next_slot;
-
- BUG_ON(ksp->tx_buffers[buff_n].skb);
-
- dmap = dma_map_single(ksp->dev, skb->data, skb->len, DMA_TO_DEVICE);
- if (unlikely(dma_mapping_error(ksp->dev, dmap))) {
- /* Failed to DMA map this SKB, give it back for now */
- spin_unlock_irq(&ksp->txq_lock);
- dev_dbg(ksp->dev, "%s: Could not map DMA memory for "\
- "transmission, trying later\n", ndev->name);
- return NETDEV_TX_BUSY;
- }
-
- ksp->tx_buffers[buff_n].dma_ptr = dmap;
- /* Mapped okay, store the buffer pointer and length for later */
- ksp->tx_buffers[buff_n].skb = skb;
- ksp->tx_buffers[buff_n].length = skb->len;
-
- /* Fill out the TX descriptor */
- ksp->tx_ring[buff_n].data_ptr =
- cpu_to_le32(ksp->tx_buffers[buff_n].dma_ptr);
- ksp->tx_ring[buff_n].status =
- cpu_to_le32(TDES_IC | TDES_FS | TDES_LS |
- (skb->len & TDES_TBS));
-
- wmb();
-
- /* Hand it over to the hardware */
- ksp->tx_ring[buff_n].owner = cpu_to_le32(TDES_OWN);
-
- if (++ksp->tx_ring_used == MAX_TX_DESC)
- netif_stop_queue(ndev);
-
- /* Kick the TX DMA in case it decided to go IDLE */
- ks8695_writereg(ksp, KS8695_DTSC, 0);
-
- /* And update the next ring slot */
- ksp->tx_ring_next_slot = (buff_n + 1) & MAX_TX_DESC_MASK;
-
- spin_unlock_irq(&ksp->txq_lock);
- return NETDEV_TX_OK;
-}
-
-/**
- * ks8695_stop - Stop (shutdown) a KS8695 ethernet interface
- * @ndev: The net_device to stop
- *
- * This disables the TX queue and cleans up a KS8695 ethernet
- * device.
- */
-static int
-ks8695_stop(struct net_device *ndev)
-{
- struct ks8695_priv *ksp = netdev_priv(ndev);
-
- netif_stop_queue(ndev);
- napi_disable(&ksp->napi);
-
- ks8695_shutdown(ksp);
-
- return 0;
-}
-
-/**
- * ks8695_open - Open (bring up) a KS8695 ethernet interface
- * @ndev: The net_device to open
- *
- * This resets, configures the MAC, initialises the RX ring and
- * DMA engines and starts the TX queue for a KS8695 ethernet
- * device.
- */
-static int
-ks8695_open(struct net_device *ndev)
-{
- struct ks8695_priv *ksp = netdev_priv(ndev);
- int ret;
-
- ks8695_reset(ksp);
-
- ks8695_update_mac(ksp);
-
- ret = ks8695_init_net(ksp);
- if (ret) {
- ks8695_shutdown(ksp);
- return ret;
- }
-
- napi_enable(&ksp->napi);
- netif_start_queue(ndev);
-
- return 0;
-}
-
-/* Platform device driver */
-
-/**
- * ks8695_init_switch - Init LAN switch to known good defaults.
- * @ksp: The device to initialise
- *
- * This initialises the LAN switch in the KS8695 to a known-good
- * set of defaults.
- */
-static void
-ks8695_init_switch(struct ks8695_priv *ksp)
-{
- u32 ctrl;
-
- /* Default value for SEC0 according to datasheet */
- ctrl = 0x40819e00;
-
- /* LED0 = Speed LED1 = Link/Activity */
- ctrl &= ~(SEC0_LLED1S | SEC0_LLED0S);
- ctrl |= (LLED0S_LINK | LLED1S_LINK_ACTIVITY);
-
- /* Enable Switch */
- ctrl |= SEC0_ENABLE;
-
- writel(ctrl, ksp->phyiface_regs + KS8695_SEC0);
-
- /* Defaults for SEC1 */
- writel(0x9400100, ksp->phyiface_regs + KS8695_SEC1);
-}
-
-/**
- * ks8695_init_wan_phy - Initialise the WAN PHY to sensible defaults
- * @ksp: The device to initialise
- *
- * This initialises a KS8695's WAN phy to sensible values for
- * autonegotiation etc.
- */
-static void
-ks8695_init_wan_phy(struct ks8695_priv *ksp)
-{
- u32 ctrl;
-
- /* Support auto-negotiation */
- ctrl = (WMC_WANAP | WMC_WANA100F | WMC_WANA100H |
- WMC_WANA10F | WMC_WANA10H);
-
- /* LED0 = Activity , LED1 = Link */
- ctrl |= (WLED0S_ACTIVITY | WLED1S_LINK);
-
- /* Restart Auto-negotiation */
- ctrl |= WMC_WANR;
-
- writel(ctrl, ksp->phyiface_regs + KS8695_WMC);
-
- writel(0, ksp->phyiface_regs + KS8695_WPPM);
- writel(0, ksp->phyiface_regs + KS8695_PPS);
-}
-
-static const struct net_device_ops ks8695_netdev_ops = {
- .ndo_open = ks8695_open,
- .ndo_stop = ks8695_stop,
- .ndo_start_xmit = ks8695_start_xmit,
- .ndo_tx_timeout = ks8695_timeout,
- .ndo_set_mac_address = ks8695_set_mac,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_rx_mode = ks8695_set_multicast,
-};
-
-/**
- * ks8695_probe - Probe and initialise a KS8695 ethernet interface
- * @pdev: The platform device to probe
- *
- * Initialise a KS8695 ethernet device from platform data.
- *
- * This driver requires at least one IORESOURCE_MEM for the
- * registers and two IORESOURCE_IRQ for the RX and TX IRQs
- * respectively. It can optionally take an additional
- * IORESOURCE_MEM for the switch or phy in the case of the lan or
- * wan ports, and an IORESOURCE_IRQ for the link IRQ for the wan
- * port.
- */
-static int
-ks8695_probe(struct platform_device *pdev)
-{
- struct ks8695_priv *ksp;
- struct net_device *ndev;
- struct resource *regs_res, *phyiface_res;
- struct resource *rxirq_res, *txirq_res, *linkirq_res;
- int ret = 0;
- int buff_n;
- bool inv_mac_addr = false;
- u32 machigh, maclow;
-
- /* Initialise a net_device */
- ndev = alloc_etherdev(sizeof(struct ks8695_priv));
- if (!ndev)
- return -ENOMEM;
-
- SET_NETDEV_DEV(ndev, &pdev->dev);
-
- dev_dbg(&pdev->dev, "ks8695_probe() called\n");
-
- /* Configure our private structure a little */
- ksp = netdev_priv(ndev);
-
- ksp->dev = &pdev->dev;
- ksp->ndev = ndev;
- ksp->msg_enable = NETIF_MSG_LINK;
-
- /* Retrieve resources */
- regs_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- phyiface_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-
- rxirq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- txirq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
- linkirq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 2);
-
- if (!(regs_res && rxirq_res && txirq_res)) {
- dev_err(ksp->dev, "insufficient resources\n");
- ret = -ENOENT;
- goto failure;
- }
-
- ksp->regs_req = request_mem_region(regs_res->start,
- resource_size(regs_res),
- pdev->name);
-
- if (!ksp->regs_req) {
- dev_err(ksp->dev, "cannot claim register space\n");
- ret = -EIO;
- goto failure;
- }
-
- ksp->io_regs = ioremap(regs_res->start, resource_size(regs_res));
-
- if (!ksp->io_regs) {
- dev_err(ksp->dev, "failed to ioremap registers\n");
- ret = -EINVAL;
- goto failure;
- }
-
- if (phyiface_res) {
- ksp->phyiface_req =
- request_mem_region(phyiface_res->start,
- resource_size(phyiface_res),
- phyiface_res->name);
-
- if (!ksp->phyiface_req) {
- dev_err(ksp->dev,
- "cannot claim switch register space\n");
- ret = -EIO;
- goto failure;
- }
-
- ksp->phyiface_regs = ioremap(phyiface_res->start,
- resource_size(phyiface_res));
-
- if (!ksp->phyiface_regs) {
- dev_err(ksp->dev,
- "failed to ioremap switch registers\n");
- ret = -EINVAL;
- goto failure;
- }
- }
-
- ksp->rx_irq = rxirq_res->start;
- ksp->rx_irq_name = rxirq_res->name ? rxirq_res->name : "Ethernet RX";
- ksp->tx_irq = txirq_res->start;
- ksp->tx_irq_name = txirq_res->name ? txirq_res->name : "Ethernet TX";
- ksp->link_irq = (linkirq_res ? linkirq_res->start : -1);
- ksp->link_irq_name = (linkirq_res && linkirq_res->name) ?
- linkirq_res->name : "Ethernet Link";
-
- /* driver system setup */
- ndev->netdev_ops = &ks8695_netdev_ops;
- ndev->watchdog_timeo = msecs_to_jiffies(watchdog);
-
- netif_napi_add(ndev, &ksp->napi, ks8695_poll, NAPI_WEIGHT);
-
- /* Retrieve the default MAC addr from the chip. */
- /* The bootloader should have left it in there for us. */
-
- machigh = ks8695_readreg(ksp, KS8695_MAH);
- maclow = ks8695_readreg(ksp, KS8695_MAL);
-
- ndev->dev_addr[0] = (machigh >> 8) & 0xFF;
- ndev->dev_addr[1] = machigh & 0xFF;
- ndev->dev_addr[2] = (maclow >> 24) & 0xFF;
- ndev->dev_addr[3] = (maclow >> 16) & 0xFF;
- ndev->dev_addr[4] = (maclow >> 8) & 0xFF;
- ndev->dev_addr[5] = maclow & 0xFF;
-
- if (!is_valid_ether_addr(ndev->dev_addr))
- inv_mac_addr = true;
-
- /* In order to be efficient memory-wise, we allocate both
- * rings in one go.
- */
- ksp->ring_base = dma_alloc_coherent(&pdev->dev, RING_DMA_SIZE,
- &ksp->ring_base_dma, GFP_KERNEL);
- if (!ksp->ring_base) {
- ret = -ENOMEM;
- goto failure;
- }
-
- /* Specify the TX DMA ring buffer */
- ksp->tx_ring = ksp->ring_base;
- ksp->tx_ring_dma = ksp->ring_base_dma;
-
- /* And initialise the queue's lock */
- spin_lock_init(&ksp->txq_lock);
- spin_lock_init(&ksp->rx_lock);
-
- /* Specify the RX DMA ring buffer */
- ksp->rx_ring = ksp->ring_base + TX_RING_DMA_SIZE;
- ksp->rx_ring_dma = ksp->ring_base_dma + TX_RING_DMA_SIZE;
-
- /* Zero the descriptor rings */
- memset(ksp->tx_ring, 0, TX_RING_DMA_SIZE);
- memset(ksp->rx_ring, 0, RX_RING_DMA_SIZE);
-
- /* Build the rings */
- for (buff_n = 0; buff_n < MAX_TX_DESC; ++buff_n) {
- ksp->tx_ring[buff_n].next_desc =
- cpu_to_le32(ksp->tx_ring_dma +
- (sizeof(struct tx_ring_desc) *
- ((buff_n + 1) & MAX_TX_DESC_MASK)));
- }
-
- for (buff_n = 0; buff_n < MAX_RX_DESC; ++buff_n) {
- ksp->rx_ring[buff_n].next_desc =
- cpu_to_le32(ksp->rx_ring_dma +
- (sizeof(struct rx_ring_desc) *
- ((buff_n + 1) & MAX_RX_DESC_MASK)));
- }
-
- /* Initialise the port (physically) */
- if (ksp->phyiface_regs && ksp->link_irq == -1) {
- ks8695_init_switch(ksp);
- ksp->dtype = KS8695_DTYPE_LAN;
- ndev->ethtool_ops = &ks8695_ethtool_ops;
- } else if (ksp->phyiface_regs && ksp->link_irq != -1) {
- ks8695_init_wan_phy(ksp);
- ksp->dtype = KS8695_DTYPE_WAN;
- ndev->ethtool_ops = &ks8695_wan_ethtool_ops;
- } else {
- /* No initialisation since HPNA does not have a PHY */
- ksp->dtype = KS8695_DTYPE_HPNA;
- ndev->ethtool_ops = &ks8695_ethtool_ops;
- }
-
- /* And bring up the net_device with the net core */
- platform_set_drvdata(pdev, ndev);
- ret = register_netdev(ndev);
-
- if (ret == 0) {
- if (inv_mac_addr)
- dev_warn(ksp->dev, "%s: Invalid ethernet MAC address. Please set using ip\n",
- ndev->name);
- dev_info(ksp->dev, "ks8695 ethernet (%s) MAC: %pM\n",
- ks8695_port_type(ksp), ndev->dev_addr);
- } else {
- /* Report the failure to register the net_device */
- dev_err(ksp->dev, "ks8695net: failed to register netdev.\n");
- goto failure;
- }
-
- /* All is well */
- return 0;
-
- /* Error exit path */
-failure:
- ks8695_release_device(ksp);
- free_netdev(ndev);
-
- return ret;
-}
-
-/**
- * ks8695_drv_suspend - Suspend a KS8695 ethernet platform device.
- * @pdev: The device to suspend
- * @state: The suspend state
- *
- * This routine detaches and shuts down a KS8695 ethernet device.
- */
-static int
-ks8695_drv_suspend(struct platform_device *pdev, pm_message_t state)
-{
- struct net_device *ndev = platform_get_drvdata(pdev);
- struct ks8695_priv *ksp = netdev_priv(ndev);
-
- ksp->in_suspend = 1;
-
- if (netif_running(ndev)) {
- netif_device_detach(ndev);
- ks8695_shutdown(ksp);
- }
-
- return 0;
-}
-
-/**
- * ks8695_drv_resume - Resume a KS8695 ethernet platform device.
- * @pdev: The device to resume
- *
- * This routine re-initialises and re-attaches a KS8695 ethernet
- * device.
- */
-static int
-ks8695_drv_resume(struct platform_device *pdev)
-{
- struct net_device *ndev = platform_get_drvdata(pdev);
- struct ks8695_priv *ksp = netdev_priv(ndev);
-
- if (netif_running(ndev)) {
- ks8695_reset(ksp);
- ks8695_init_net(ksp);
- ks8695_set_multicast(ndev);
- netif_device_attach(ndev);
- }
-
- ksp->in_suspend = 0;
-
- return 0;
-}
-
-/**
- * ks8695_drv_remove - Remove a KS8695 net device on driver unload.
- * @pdev: The platform device to remove
- *
- * This unregisters and releases a KS8695 ethernet device.
- */
-static int
-ks8695_drv_remove(struct platform_device *pdev)
-{
- struct net_device *ndev = platform_get_drvdata(pdev);
- struct ks8695_priv *ksp = netdev_priv(ndev);
-
- netif_napi_del(&ksp->napi);
-
- unregister_netdev(ndev);
- ks8695_release_device(ksp);
- free_netdev(ndev);
-
- dev_dbg(&pdev->dev, "released and freed device\n");
- return 0;
-}
-
-static struct platform_driver ks8695_driver = {
- .driver = {
- .name = MODULENAME,
- },
- .probe = ks8695_probe,
- .remove = ks8695_drv_remove,
- .suspend = ks8695_drv_suspend,
- .resume = ks8695_drv_resume,
-};
-
-module_platform_driver(ks8695_driver);
-
-MODULE_AUTHOR("Simtec Electronics");
-MODULE_DESCRIPTION("Micrel KS8695 (Centaur) Ethernet driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:" MODULENAME);
-
-module_param(watchdog, int, 0400);
-MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds");
diff --git a/drivers/net/ethernet/micrel/ks8695net.h b/drivers/net/ethernet/micrel/ks8695net.h
deleted file mode 100644
index b18fad4ad5fd..000000000000
--- a/drivers/net/ethernet/micrel/ks8695net.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Micrel KS8695 (Centaur) Ethernet.
- *
- * Copyright 2008 Simtec Electronics
- * Daniel Silverstone <dsilvers@simtec.co.uk>
- * Vincent Sanders <vince@simtec.co.uk>
- */
-
-#ifndef KS8695NET_H
-#define KS8695NET_H
-
-/* Receive descriptor flags */
-#define RDES_OWN (1 << 31) /* Ownership */
-#define RDES_FS (1 << 30) /* First Descriptor */
-#define RDES_LS (1 << 29) /* Last Descriptor */
-#define RDES_IPE (1 << 28) /* IP Checksum error */
-#define RDES_TCPE (1 << 27) /* TCP Checksum error */
-#define RDES_UDPE (1 << 26) /* UDP Checksum error */
-#define RDES_ES (1 << 25) /* Error summary */
-#define RDES_MF (1 << 24) /* Multicast Frame */
-#define RDES_RE (1 << 19) /* MII Error reported */
-#define RDES_TL (1 << 18) /* Frame too Long */
-#define RDES_RF (1 << 17) /* Runt Frame */
-#define RDES_CE (1 << 16) /* CRC error */
-#define RDES_FT (1 << 15) /* Frame Type */
-#define RDES_FLEN (0x7ff) /* Frame Length */
-
-#define RDES_RER (1 << 25) /* Receive End of Ring */
-#define RDES_RBS (0x7ff) /* Receive Buffer Size */
-
-/* Transmit descriptor flags */
-
-#define TDES_OWN (1 << 31) /* Ownership */
-
-#define TDES_IC (1 << 31) /* Interrupt on Completion */
-#define TDES_FS (1 << 30) /* First Segment */
-#define TDES_LS (1 << 29) /* Last Segment */
-#define TDES_IPCKG (1 << 28) /* IP Checksum generate */
-#define TDES_TCPCKG (1 << 27) /* TCP Checksum generate */
-#define TDES_UDPCKG (1 << 26) /* UDP Checksum generate */
-#define TDES_TER (1 << 25) /* Transmit End of Ring */
-#define TDES_TBS (0x7ff) /* Transmit Buffer Size */
-
-/*
- * Network controller register offsets
- */
-#define KS8695_DTXC (0x00) /* DMA Transmit Control */
-#define KS8695_DRXC (0x04) /* DMA Receive Control */
-#define KS8695_DTSC (0x08) /* DMA Transmit Start Command */
-#define KS8695_DRSC (0x0c) /* DMA Receive Start Command */
-#define KS8695_TDLB (0x10) /* Transmit Descriptor List
- * Base Address
- */
-#define KS8695_RDLB (0x14) /* Receive Descriptor List
- * Base Address
- */
-#define KS8695_MAL (0x18) /* MAC Station Address Low */
-#define KS8695_MAH (0x1c) /* MAC Station Address High */
-#define KS8695_AAL_(n) (0x80 + ((n)*8)) /* MAC Additional
- * Station Address
- * (0..15) Low
- */
-#define KS8695_AAH_(n) (0x84 + ((n)*8)) /* MAC Additional
- * Station Address
- * (0..15) High
- */
-
-
-/* DMA Transmit Control Register */
-#define DTXC_TRST (1 << 31) /* Soft Reset */
-#define DTXC_TBS (0x3f << 24) /* Transmit Burst Size */
-#define DTXC_TUCG (1 << 18) /* Transmit UDP
- * Checksum Generate
- */
-#define DTXC_TTCG (1 << 17) /* Transmit TCP
- * Checksum Generate
- */
-#define DTXC_TICG (1 << 16) /* Transmit IP
- * Checksum Generate
- */
-#define DTXC_TFCE (1 << 9) /* Transmit Flow
- * Control Enable
- */
-#define DTXC_TLB (1 << 8) /* Loopback mode */
-#define DTXC_TEP (1 << 2) /* Transmit Enable Padding */
-#define DTXC_TAC (1 << 1) /* Transmit Add CRC */
-#define DTXC_TE (1 << 0) /* TX Enable */
-
-/* DMA Receive Control Register */
-#define DRXC_RBS (0x3f << 24) /* Receive Burst Size */
-#define DRXC_RUCC (1 << 18) /* Receive UDP Checksum check */
-#define DRXC_RTCG (1 << 17) /* Receive TCP Checksum check */
-#define DRXC_RICG (1 << 16) /* Receive IP Checksum check */
-#define DRXC_RFCE (1 << 9) /* Receive Flow Control
- * Enable
- */
-#define DRXC_RB (1 << 6) /* Receive Broadcast */
-#define DRXC_RM (1 << 5) /* Receive Multicast */
-#define DRXC_RU (1 << 4) /* Receive Unicast */
-#define DRXC_RERR (1 << 3) /* Receive Error Frame */
-#define DRXC_RA (1 << 2) /* Receive All */
-#define DRXC_RE (1 << 0) /* RX Enable */
-
-/* Additional Station Address High */
-#define AAH_E (1 << 31) /* Address Enabled */
-
-#endif /* KS8695NET_H */
diff --git a/drivers/net/ethernet/nuvoton/Kconfig b/drivers/net/ethernet/nuvoton/Kconfig
deleted file mode 100644
index 325e26c549f8..000000000000
--- a/drivers/net/ethernet/nuvoton/Kconfig
+++ /dev/null
@@ -1,29 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Nuvoton network device configuration
-#
-
-config NET_VENDOR_NUVOTON
- bool "Nuvoton devices"
- default y
- depends on ARM && ARCH_W90X900
- ---help---
- If you have a network (Ethernet) card belonging to this class, say Y.
-
- Note that the answer to this question doesn't directly affect the
- kernel: saying N will just cause the configurator to skip all
- the questions about Nuvoton cards. If you say Y, you will be asked
- for your specific card in the following questions.
-
-if NET_VENDOR_NUVOTON
-
-config W90P910_ETH
- tristate "Nuvoton w90p910 Ethernet support"
- depends on ARM && ARCH_W90X900
- select PHYLIB
- select MII
- ---help---
- Say Y here if you want to use built-in Ethernet ports
- on w90p910 processor.
-
-endif # NET_VENDOR_NUVOTON
diff --git a/drivers/net/ethernet/nuvoton/Makefile b/drivers/net/ethernet/nuvoton/Makefile
deleted file mode 100644
index 66f6e728d54b..000000000000
--- a/drivers/net/ethernet/nuvoton/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for the Nuvoton network device drivers.
-#
-
-obj-$(CONFIG_W90P910_ETH) += w90p910_ether.o
diff --git a/drivers/net/ethernet/nuvoton/w90p910_ether.c b/drivers/net/ethernet/nuvoton/w90p910_ether.c
deleted file mode 100644
index 3d73970b3a2e..000000000000
--- a/drivers/net/ethernet/nuvoton/w90p910_ether.c
+++ /dev/null
@@ -1,1082 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2008-2009 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/mii.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/ethtool.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/gfp.h>
-
-#define DRV_MODULE_NAME "w90p910-emc"
-#define DRV_MODULE_VERSION "0.1"
-
-/* Ethernet MAC Registers */
-#define REG_CAMCMR 0x00
-#define REG_CAMEN 0x04
-#define REG_CAMM_BASE 0x08
-#define REG_CAML_BASE 0x0c
-#define REG_TXDLSA 0x88
-#define REG_RXDLSA 0x8C
-#define REG_MCMDR 0x90
-#define REG_MIID 0x94
-#define REG_MIIDA 0x98
-#define REG_FFTCR 0x9C
-#define REG_TSDR 0xa0
-#define REG_RSDR 0xa4
-#define REG_DMARFC 0xa8
-#define REG_MIEN 0xac
-#define REG_MISTA 0xb0
-#define REG_CTXDSA 0xcc
-#define REG_CTXBSA 0xd0
-#define REG_CRXDSA 0xd4
-#define REG_CRXBSA 0xd8
-
-/* mac controller bit */
-#define MCMDR_RXON 0x01
-#define MCMDR_ACP (0x01 << 3)
-#define MCMDR_SPCRC (0x01 << 5)
-#define MCMDR_TXON (0x01 << 8)
-#define MCMDR_FDUP (0x01 << 18)
-#define MCMDR_ENMDC (0x01 << 19)
-#define MCMDR_OPMOD (0x01 << 20)
-#define SWR (0x01 << 24)
-
-/* cam command regiser */
-#define CAMCMR_AUP 0x01
-#define CAMCMR_AMP (0x01 << 1)
-#define CAMCMR_ABP (0x01 << 2)
-#define CAMCMR_CCAM (0x01 << 3)
-#define CAMCMR_ECMP (0x01 << 4)
-#define CAM0EN 0x01
-
-/* mac mii controller bit */
-#define MDCCR (0x0a << 20)
-#define PHYAD (0x01 << 8)
-#define PHYWR (0x01 << 16)
-#define PHYBUSY (0x01 << 17)
-#define PHYPRESP (0x01 << 18)
-#define CAM_ENTRY_SIZE 0x08
-
-/* rx and tx status */
-#define TXDS_TXCP (0x01 << 19)
-#define RXDS_CRCE (0x01 << 17)
-#define RXDS_PTLE (0x01 << 19)
-#define RXDS_RXGD (0x01 << 20)
-#define RXDS_ALIE (0x01 << 21)
-#define RXDS_RP (0x01 << 22)
-
-/* mac interrupt status*/
-#define MISTA_EXDEF (0x01 << 19)
-#define MISTA_TXBERR (0x01 << 24)
-#define MISTA_TDU (0x01 << 23)
-#define MISTA_RDU (0x01 << 10)
-#define MISTA_RXBERR (0x01 << 11)
-
-#define ENSTART 0x01
-#define ENRXINTR 0x01
-#define ENRXGD (0x01 << 4)
-#define ENRXBERR (0x01 << 11)
-#define ENTXINTR (0x01 << 16)
-#define ENTXCP (0x01 << 18)
-#define ENTXABT (0x01 << 21)
-#define ENTXBERR (0x01 << 24)
-#define ENMDC (0x01 << 19)
-#define PHYBUSY (0x01 << 17)
-#define MDCCR_VAL 0xa00000
-
-/* rx and tx owner bit */
-#define RX_OWEN_DMA (0x01 << 31)
-#define RX_OWEN_CPU (~(0x03 << 30))
-#define TX_OWEN_DMA (0x01 << 31)
-#define TX_OWEN_CPU (~(0x01 << 31))
-
-/* tx frame desc controller bit */
-#define MACTXINTEN 0x04
-#define CRCMODE 0x02
-#define PADDINGMODE 0x01
-
-/* fftcr controller bit */
-#define TXTHD (0x03 << 8)
-#define BLENGTH (0x01 << 20)
-
-/* global setting for driver */
-#define RX_DESC_SIZE 50
-#define TX_DESC_SIZE 10
-#define MAX_RBUFF_SZ 0x600
-#define MAX_TBUFF_SZ 0x600
-#define TX_TIMEOUT (HZ/2)
-#define DELAY 1000
-#define CAM0 0x0
-
-static int w90p910_mdio_read(struct net_device *dev, int phy_id, int reg);
-
-struct w90p910_rxbd {
- unsigned int sl;
- unsigned int buffer;
- unsigned int reserved;
- unsigned int next;
-};
-
-struct w90p910_txbd {
- unsigned int mode;
- unsigned int buffer;
- unsigned int sl;
- unsigned int next;
-};
-
-struct recv_pdesc {
- struct w90p910_rxbd desclist[RX_DESC_SIZE];
- char recv_buf[RX_DESC_SIZE][MAX_RBUFF_SZ];
-};
-
-struct tran_pdesc {
- struct w90p910_txbd desclist[TX_DESC_SIZE];
- char tran_buf[TX_DESC_SIZE][MAX_TBUFF_SZ];
-};
-
-struct w90p910_ether {
- struct recv_pdesc *rdesc;
- struct tran_pdesc *tdesc;
- dma_addr_t rdesc_phys;
- dma_addr_t tdesc_phys;
- struct platform_device *pdev;
- struct resource *res;
- struct sk_buff *skb;
- struct clk *clk;
- struct clk *rmiiclk;
- struct mii_if_info mii;
- struct timer_list check_timer;
- void __iomem *reg;
- int rxirq;
- int txirq;
- unsigned int cur_tx;
- unsigned int cur_rx;
- unsigned int finish_tx;
- unsigned int rx_packets;
- unsigned int rx_bytes;
- unsigned int start_tx_ptr;
- unsigned int start_rx_ptr;
- unsigned int linkflag;
-};
-
-static void update_linkspeed_register(struct net_device *dev,
- unsigned int speed, unsigned int duplex)
-{
- struct w90p910_ether *ether = netdev_priv(dev);
- unsigned int val;
-
- val = __raw_readl(ether->reg + REG_MCMDR);
-
- if (speed == SPEED_100) {
- /* 100 full/half duplex */
- if (duplex == DUPLEX_FULL) {
- val |= (MCMDR_OPMOD | MCMDR_FDUP);
- } else {
- val |= MCMDR_OPMOD;
- val &= ~MCMDR_FDUP;
- }
- } else {
- /* 10 full/half duplex */
- if (duplex == DUPLEX_FULL) {
- val |= MCMDR_FDUP;
- val &= ~MCMDR_OPMOD;
- } else {
- val &= ~(MCMDR_FDUP | MCMDR_OPMOD);
- }
- }
-
- __raw_writel(val, ether->reg + REG_MCMDR);
-}
-
-static void update_linkspeed(struct net_device *dev)
-{
- struct w90p910_ether *ether = netdev_priv(dev);
- struct platform_device *pdev;
- unsigned int bmsr, bmcr, lpa, speed, duplex;
-
- pdev = ether->pdev;
-
- if (!mii_link_ok(&ether->mii)) {
- ether->linkflag = 0x0;
- netif_carrier_off(dev);
- dev_warn(&pdev->dev, "%s: Link down.\n", dev->name);
- return;
- }
-
- if (ether->linkflag == 1)
- return;
-
- bmsr = w90p910_mdio_read(dev, ether->mii.phy_id, MII_BMSR);
- bmcr = w90p910_mdio_read(dev, ether->mii.phy_id, MII_BMCR);
-
- if (bmcr & BMCR_ANENABLE) {
- if (!(bmsr & BMSR_ANEGCOMPLETE))
- return;
-
- lpa = w90p910_mdio_read(dev, ether->mii.phy_id, MII_LPA);
-
- if ((lpa & LPA_100FULL) || (lpa & LPA_100HALF))
- speed = SPEED_100;
- else
- speed = SPEED_10;
-
- if ((lpa & LPA_100FULL) || (lpa & LPA_10FULL))
- duplex = DUPLEX_FULL;
- else
- duplex = DUPLEX_HALF;
-
- } else {
- speed = (bmcr & BMCR_SPEED100) ? SPEED_100 : SPEED_10;
- duplex = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
- }
-
- update_linkspeed_register(dev, speed, duplex);
-
- dev_info(&pdev->dev, "%s: Link now %i-%s\n", dev->name, speed,
- (duplex == DUPLEX_FULL) ? "FullDuplex" : "HalfDuplex");
- ether->linkflag = 0x01;
-
- netif_carrier_on(dev);
-}
-
-static void w90p910_check_link(struct timer_list *t)
-{
- struct w90p910_ether *ether = from_timer(ether, t, check_timer);
- struct net_device *dev = ether->mii.dev;
-
- update_linkspeed(dev);
- mod_timer(&ether->check_timer, jiffies + msecs_to_jiffies(1000));
-}
-
-static void w90p910_write_cam(struct net_device *dev,
- unsigned int x, unsigned char *pval)
-{
- struct w90p910_ether *ether = netdev_priv(dev);
- unsigned int msw, lsw;
-
- msw = (pval[0] << 24) | (pval[1] << 16) | (pval[2] << 8) | pval[3];
-
- lsw = (pval[4] << 24) | (pval[5] << 16);
-
- __raw_writel(lsw, ether->reg + REG_CAML_BASE + x * CAM_ENTRY_SIZE);
- __raw_writel(msw, ether->reg + REG_CAMM_BASE + x * CAM_ENTRY_SIZE);
-}
-
-static int w90p910_init_desc(struct net_device *dev)
-{
- struct w90p910_ether *ether;
- struct w90p910_txbd *tdesc;
- struct w90p910_rxbd *rdesc;
- struct platform_device *pdev;
- unsigned int i;
-
- ether = netdev_priv(dev);
- pdev = ether->pdev;
-
- ether->tdesc = dma_alloc_coherent(&pdev->dev, sizeof(struct tran_pdesc),
- &ether->tdesc_phys, GFP_KERNEL);
- if (!ether->tdesc)
- return -ENOMEM;
-
- ether->rdesc = dma_alloc_coherent(&pdev->dev, sizeof(struct recv_pdesc),
- &ether->rdesc_phys, GFP_KERNEL);
- if (!ether->rdesc) {
- dma_free_coherent(&pdev->dev, sizeof(struct tran_pdesc),
- ether->tdesc, ether->tdesc_phys);
- return -ENOMEM;
- }
-
- for (i = 0; i < TX_DESC_SIZE; i++) {
- unsigned int offset;
-
- tdesc = &(ether->tdesc->desclist[i]);
-
- if (i == TX_DESC_SIZE - 1)
- offset = offsetof(struct tran_pdesc, desclist[0]);
- else
- offset = offsetof(struct tran_pdesc, desclist[i + 1]);
-
- tdesc->next = ether->tdesc_phys + offset;
- tdesc->buffer = ether->tdesc_phys +
- offsetof(struct tran_pdesc, tran_buf[i]);
- tdesc->sl = 0;
- tdesc->mode = 0;
- }
-
- ether->start_tx_ptr = ether->tdesc_phys;
-
- for (i = 0; i < RX_DESC_SIZE; i++) {
- unsigned int offset;
-
- rdesc = &(ether->rdesc->desclist[i]);
-
- if (i == RX_DESC_SIZE - 1)
- offset = offsetof(struct recv_pdesc, desclist[0]);
- else
- offset = offsetof(struct recv_pdesc, desclist[i + 1]);
-
- rdesc->next = ether->rdesc_phys + offset;
- rdesc->sl = RX_OWEN_DMA;
- rdesc->buffer = ether->rdesc_phys +
- offsetof(struct recv_pdesc, recv_buf[i]);
- }
-
- ether->start_rx_ptr = ether->rdesc_phys;
-
- return 0;
-}
-
-static void w90p910_set_fifo_threshold(struct net_device *dev)
-{
- struct w90p910_ether *ether = netdev_priv(dev);
- unsigned int val;
-
- val = TXTHD | BLENGTH;
- __raw_writel(val, ether->reg + REG_FFTCR);
-}
-
-static void w90p910_return_default_idle(struct net_device *dev)
-{
- struct w90p910_ether *ether = netdev_priv(dev);
- unsigned int val;
-
- val = __raw_readl(ether->reg + REG_MCMDR);
- val |= SWR;
- __raw_writel(val, ether->reg + REG_MCMDR);
-}
-
-static void w90p910_trigger_rx(struct net_device *dev)
-{
- struct w90p910_ether *ether = netdev_priv(dev);
-
- __raw_writel(ENSTART, ether->reg + REG_RSDR);
-}
-
-static void w90p910_trigger_tx(struct net_device *dev)
-{
- struct w90p910_ether *ether = netdev_priv(dev);
-
- __raw_writel(ENSTART, ether->reg + REG_TSDR);
-}
-
-static void w90p910_enable_mac_interrupt(struct net_device *dev)
-{
- struct w90p910_ether *ether = netdev_priv(dev);
- unsigned int val;
-
- val = ENTXINTR | ENRXINTR | ENRXGD | ENTXCP;
- val |= ENTXBERR | ENRXBERR | ENTXABT;
-
- __raw_writel(val, ether->reg + REG_MIEN);
-}
-
-static void w90p910_get_and_clear_int(struct net_device *dev,
- unsigned int *val)
-{
- struct w90p910_ether *ether = netdev_priv(dev);
-
- *val = __raw_readl(ether->reg + REG_MISTA);
- __raw_writel(*val, ether->reg + REG_MISTA);
-}
-
-static void w90p910_set_global_maccmd(struct net_device *dev)
-{
- struct w90p910_ether *ether = netdev_priv(dev);
- unsigned int val;
-
- val = __raw_readl(ether->reg + REG_MCMDR);
- val |= MCMDR_SPCRC | MCMDR_ENMDC | MCMDR_ACP | ENMDC;
- __raw_writel(val, ether->reg + REG_MCMDR);
-}
-
-static void w90p910_enable_cam(struct net_device *dev)
-{
- struct w90p910_ether *ether = netdev_priv(dev);
- unsigned int val;
-
- w90p910_write_cam(dev, CAM0, dev->dev_addr);
-
- val = __raw_readl(ether->reg + REG_CAMEN);
- val |= CAM0EN;
- __raw_writel(val, ether->reg + REG_CAMEN);
-}
-
-static void w90p910_enable_cam_command(struct net_device *dev)
-{
- struct w90p910_ether *ether = netdev_priv(dev);
- unsigned int val;
-
- val = CAMCMR_ECMP | CAMCMR_ABP | CAMCMR_AMP;
- __raw_writel(val, ether->reg + REG_CAMCMR);
-}
-
-static void w90p910_enable_tx(struct net_device *dev, unsigned int enable)
-{
- struct w90p910_ether *ether = netdev_priv(dev);
- unsigned int val;
-
- val = __raw_readl(ether->reg + REG_MCMDR);
-
- if (enable)
- val |= MCMDR_TXON;
- else
- val &= ~MCMDR_TXON;
-
- __raw_writel(val, ether->reg + REG_MCMDR);
-}
-
-static void w90p910_enable_rx(struct net_device *dev, unsigned int enable)
-{
- struct w90p910_ether *ether = netdev_priv(dev);
- unsigned int val;
-
- val = __raw_readl(ether->reg + REG_MCMDR);
-
- if (enable)
- val |= MCMDR_RXON;
- else
- val &= ~MCMDR_RXON;
-
- __raw_writel(val, ether->reg + REG_MCMDR);
-}
-
-static void w90p910_set_curdest(struct net_device *dev)
-{
- struct w90p910_ether *ether = netdev_priv(dev);
-
- __raw_writel(ether->start_rx_ptr, ether->reg + REG_RXDLSA);
- __raw_writel(ether->start_tx_ptr, ether->reg + REG_TXDLSA);
-}
-
-static void w90p910_reset_mac(struct net_device *dev)
-{
- struct w90p910_ether *ether = netdev_priv(dev);
-
- w90p910_enable_tx(dev, 0);
- w90p910_enable_rx(dev, 0);
- w90p910_set_fifo_threshold(dev);
- w90p910_return_default_idle(dev);
-
- if (!netif_queue_stopped(dev))
- netif_stop_queue(dev);
-
- w90p910_init_desc(dev);
-
- netif_trans_update(dev); /* prevent tx timeout */
- ether->cur_tx = 0x0;
- ether->finish_tx = 0x0;
- ether->cur_rx = 0x0;
-
- w90p910_set_curdest(dev);
- w90p910_enable_cam(dev);
- w90p910_enable_cam_command(dev);
- w90p910_enable_mac_interrupt(dev);
- w90p910_enable_tx(dev, 1);
- w90p910_enable_rx(dev, 1);
- w90p910_trigger_tx(dev);
- w90p910_trigger_rx(dev);
-
- netif_trans_update(dev); /* prevent tx timeout */
-
- if (netif_queue_stopped(dev))
- netif_wake_queue(dev);
-}
-
-static void w90p910_mdio_write(struct net_device *dev,
- int phy_id, int reg, int data)
-{
- struct w90p910_ether *ether = netdev_priv(dev);
- struct platform_device *pdev;
- unsigned int val, i;
-
- pdev = ether->pdev;
-
- __raw_writel(data, ether->reg + REG_MIID);
-
- val = (phy_id << 0x08) | reg;
- val |= PHYBUSY | PHYWR | MDCCR_VAL;
- __raw_writel(val, ether->reg + REG_MIIDA);
-
- for (i = 0; i < DELAY; i++) {
- if ((__raw_readl(ether->reg + REG_MIIDA) & PHYBUSY) == 0)
- break;
- }
-
- if (i == DELAY)
- dev_warn(&pdev->dev, "mdio write timed out\n");
-}
-
-static int w90p910_mdio_read(struct net_device *dev, int phy_id, int reg)
-{
- struct w90p910_ether *ether = netdev_priv(dev);
- struct platform_device *pdev;
- unsigned int val, i, data;
-
- pdev = ether->pdev;
-
- val = (phy_id << 0x08) | reg;
- val |= PHYBUSY | MDCCR_VAL;
- __raw_writel(val, ether->reg + REG_MIIDA);
-
- for (i = 0; i < DELAY; i++) {
- if ((__raw_readl(ether->reg + REG_MIIDA) & PHYBUSY) == 0)
- break;
- }
-
- if (i == DELAY) {
- dev_warn(&pdev->dev, "mdio read timed out\n");
- data = 0xffff;
- } else {
- data = __raw_readl(ether->reg + REG_MIID);
- }
-
- return data;
-}
-
-static int w90p910_set_mac_address(struct net_device *dev, void *addr)
-{
- struct sockaddr *address = addr;
-
- if (!is_valid_ether_addr(address->sa_data))
- return -EADDRNOTAVAIL;
-
- memcpy(dev->dev_addr, address->sa_data, dev->addr_len);
- w90p910_write_cam(dev, CAM0, dev->dev_addr);
-
- return 0;
-}
-
-static int w90p910_ether_close(struct net_device *dev)
-{
- struct w90p910_ether *ether = netdev_priv(dev);
- struct platform_device *pdev;
-
- pdev = ether->pdev;
-
- dma_free_coherent(&pdev->dev, sizeof(struct recv_pdesc),
- ether->rdesc, ether->rdesc_phys);
- dma_free_coherent(&pdev->dev, sizeof(struct tran_pdesc),
- ether->tdesc, ether->tdesc_phys);
-
- netif_stop_queue(dev);
-
- del_timer_sync(&ether->check_timer);
- clk_disable(ether->rmiiclk);
- clk_disable(ether->clk);
-
- free_irq(ether->txirq, dev);
- free_irq(ether->rxirq, dev);
-
- return 0;
-}
-
-static int w90p910_send_frame(struct net_device *dev,
- unsigned char *data, int length)
-{
- struct w90p910_ether *ether;
- struct w90p910_txbd *txbd;
- struct platform_device *pdev;
- unsigned char *buffer;
-
- ether = netdev_priv(dev);
- pdev = ether->pdev;
-
- txbd = &ether->tdesc->desclist[ether->cur_tx];
- buffer = ether->tdesc->tran_buf[ether->cur_tx];
-
- if (length > 1514) {
- dev_err(&pdev->dev, "send data %d bytes, check it\n", length);
- length = 1514;
- }
-
- txbd->sl = length & 0xFFFF;
-
- memcpy(buffer, data, length);
-
- txbd->mode = TX_OWEN_DMA | PADDINGMODE | CRCMODE | MACTXINTEN;
-
- w90p910_enable_tx(dev, 1);
-
- w90p910_trigger_tx(dev);
-
- if (++ether->cur_tx >= TX_DESC_SIZE)
- ether->cur_tx = 0;
-
- txbd = &ether->tdesc->desclist[ether->cur_tx];
-
- if (txbd->mode & TX_OWEN_DMA)
- netif_stop_queue(dev);
-
- return 0;
-}
-
-static int w90p910_ether_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
- struct w90p910_ether *ether = netdev_priv(dev);
-
- if (!(w90p910_send_frame(dev, skb->data, skb->len))) {
- ether->skb = skb;
- dev_consume_skb_irq(skb);
- return 0;
- }
- return -EAGAIN;
-}
-
-static irqreturn_t w90p910_tx_interrupt(int irq, void *dev_id)
-{
- struct w90p910_ether *ether;
- struct w90p910_txbd *txbd;
- struct platform_device *pdev;
- struct net_device *dev;
- unsigned int cur_entry, entry, status;
-
- dev = dev_id;
- ether = netdev_priv(dev);
- pdev = ether->pdev;
-
- w90p910_get_and_clear_int(dev, &status);
-
- cur_entry = __raw_readl(ether->reg + REG_CTXDSA);
-
- entry = ether->tdesc_phys +
- offsetof(struct tran_pdesc, desclist[ether->finish_tx]);
-
- while (entry != cur_entry) {
- txbd = &ether->tdesc->desclist[ether->finish_tx];
-
- if (++ether->finish_tx >= TX_DESC_SIZE)
- ether->finish_tx = 0;
-
- if (txbd->sl & TXDS_TXCP) {
- dev->stats.tx_packets++;
- dev->stats.tx_bytes += txbd->sl & 0xFFFF;
- } else {
- dev->stats.tx_errors++;
- }
-
- txbd->sl = 0x0;
- txbd->mode = 0x0;
-
- if (netif_queue_stopped(dev))
- netif_wake_queue(dev);
-
- entry = ether->tdesc_phys +
- offsetof(struct tran_pdesc, desclist[ether->finish_tx]);
- }
-
- if (status & MISTA_EXDEF) {
- dev_err(&pdev->dev, "emc defer exceed interrupt\n");
- } else if (status & MISTA_TXBERR) {
- dev_err(&pdev->dev, "emc bus error interrupt\n");
- w90p910_reset_mac(dev);
- } else if (status & MISTA_TDU) {
- if (netif_queue_stopped(dev))
- netif_wake_queue(dev);
- }
-
- return IRQ_HANDLED;
-}
-
-static void netdev_rx(struct net_device *dev)
-{
- struct w90p910_ether *ether;
- struct w90p910_rxbd *rxbd;
- struct platform_device *pdev;
- struct sk_buff *skb;
- unsigned char *data;
- unsigned int length, status, val, entry;
-
- ether = netdev_priv(dev);
- pdev = ether->pdev;
-
- rxbd = &ether->rdesc->desclist[ether->cur_rx];
-
- do {
- val = __raw_readl(ether->reg + REG_CRXDSA);
-
- entry = ether->rdesc_phys +
- offsetof(struct recv_pdesc, desclist[ether->cur_rx]);
-
- if (val == entry)
- break;
-
- status = rxbd->sl;
- length = status & 0xFFFF;
-
- if (status & RXDS_RXGD) {
- data = ether->rdesc->recv_buf[ether->cur_rx];
- skb = netdev_alloc_skb(dev, length + 2);
- if (!skb) {
- dev->stats.rx_dropped++;
- return;
- }
-
- skb_reserve(skb, 2);
- skb_put(skb, length);
- skb_copy_to_linear_data(skb, data, length);
- skb->protocol = eth_type_trans(skb, dev);
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += length;
- netif_rx(skb);
- } else {
- dev->stats.rx_errors++;
-
- if (status & RXDS_RP) {
- dev_err(&pdev->dev, "rx runt err\n");
- dev->stats.rx_length_errors++;
- } else if (status & RXDS_CRCE) {
- dev_err(&pdev->dev, "rx crc err\n");
- dev->stats.rx_crc_errors++;
- } else if (status & RXDS_ALIE) {
- dev_err(&pdev->dev, "rx alignment err\n");
- dev->stats.rx_frame_errors++;
- } else if (status & RXDS_PTLE) {
- dev_err(&pdev->dev, "rx longer err\n");
- dev->stats.rx_over_errors++;
- }
- }
-
- rxbd->sl = RX_OWEN_DMA;
- rxbd->reserved = 0x0;
-
- if (++ether->cur_rx >= RX_DESC_SIZE)
- ether->cur_rx = 0;
-
- rxbd = &ether->rdesc->desclist[ether->cur_rx];
-
- } while (1);
-}
-
-static irqreturn_t w90p910_rx_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev;
- struct w90p910_ether *ether;
- struct platform_device *pdev;
- unsigned int status;
-
- dev = dev_id;
- ether = netdev_priv(dev);
- pdev = ether->pdev;
-
- w90p910_get_and_clear_int(dev, &status);
-
- if (status & MISTA_RDU) {
- netdev_rx(dev);
- w90p910_trigger_rx(dev);
-
- return IRQ_HANDLED;
- } else if (status & MISTA_RXBERR) {
- dev_err(&pdev->dev, "emc rx bus error\n");
- w90p910_reset_mac(dev);
- }
-
- netdev_rx(dev);
- return IRQ_HANDLED;
-}
-
-static int w90p910_ether_open(struct net_device *dev)
-{
- struct w90p910_ether *ether;
- struct platform_device *pdev;
-
- ether = netdev_priv(dev);
- pdev = ether->pdev;
-
- w90p910_reset_mac(dev);
- w90p910_set_fifo_threshold(dev);
- w90p910_set_curdest(dev);
- w90p910_enable_cam(dev);
- w90p910_enable_cam_command(dev);
- w90p910_enable_mac_interrupt(dev);
- w90p910_set_global_maccmd(dev);
- w90p910_enable_rx(dev, 1);
-
- clk_enable(ether->rmiiclk);
- clk_enable(ether->clk);
-
- ether->rx_packets = 0x0;
- ether->rx_bytes = 0x0;
-
- if (request_irq(ether->txirq, w90p910_tx_interrupt,
- 0x0, pdev->name, dev)) {
- dev_err(&pdev->dev, "register irq tx failed\n");
- return -EAGAIN;
- }
-
- if (request_irq(ether->rxirq, w90p910_rx_interrupt,
- 0x0, pdev->name, dev)) {
- dev_err(&pdev->dev, "register irq rx failed\n");
- free_irq(ether->txirq, dev);
- return -EAGAIN;
- }
-
- mod_timer(&ether->check_timer, jiffies + msecs_to_jiffies(1000));
- netif_start_queue(dev);
- w90p910_trigger_rx(dev);
-
- dev_info(&pdev->dev, "%s is OPENED\n", dev->name);
-
- return 0;
-}
-
-static void w90p910_ether_set_multicast_list(struct net_device *dev)
-{
- struct w90p910_ether *ether;
- unsigned int rx_mode;
-
- ether = netdev_priv(dev);
-
- if (dev->flags & IFF_PROMISC)
- rx_mode = CAMCMR_AUP | CAMCMR_AMP | CAMCMR_ABP | CAMCMR_ECMP;
- else if ((dev->flags & IFF_ALLMULTI) || !netdev_mc_empty(dev))
- rx_mode = CAMCMR_AMP | CAMCMR_ABP | CAMCMR_ECMP;
- else
- rx_mode = CAMCMR_ECMP | CAMCMR_ABP;
- __raw_writel(rx_mode, ether->reg + REG_CAMCMR);
-}
-
-static int w90p910_ether_ioctl(struct net_device *dev,
- struct ifreq *ifr, int cmd)
-{
- struct w90p910_ether *ether = netdev_priv(dev);
- struct mii_ioctl_data *data = if_mii(ifr);
-
- return generic_mii_ioctl(&ether->mii, data, cmd, NULL);
-}
-
-static void w90p910_get_drvinfo(struct net_device *dev,
- struct ethtool_drvinfo *info)
-{
- strlcpy(info->driver, DRV_MODULE_NAME, sizeof(info->driver));
- strlcpy(info->version, DRV_MODULE_VERSION, sizeof(info->version));
-}
-
-static int w90p910_get_link_ksettings(struct net_device *dev,
- struct ethtool_link_ksettings *cmd)
-{
- struct w90p910_ether *ether = netdev_priv(dev);
-
- mii_ethtool_get_link_ksettings(&ether->mii, cmd);
-
- return 0;
-}
-
-static int w90p910_set_link_ksettings(struct net_device *dev,
- const struct ethtool_link_ksettings *cmd)
-{
- struct w90p910_ether *ether = netdev_priv(dev);
- return mii_ethtool_set_link_ksettings(&ether->mii, cmd);
-}
-
-static int w90p910_nway_reset(struct net_device *dev)
-{
- struct w90p910_ether *ether = netdev_priv(dev);
- return mii_nway_restart(&ether->mii);
-}
-
-static u32 w90p910_get_link(struct net_device *dev)
-{
- struct w90p910_ether *ether = netdev_priv(dev);
- return mii_link_ok(&ether->mii);
-}
-
-static const struct ethtool_ops w90p910_ether_ethtool_ops = {
- .get_drvinfo = w90p910_get_drvinfo,
- .nway_reset = w90p910_nway_reset,
- .get_link = w90p910_get_link,
- .get_link_ksettings = w90p910_get_link_ksettings,
- .set_link_ksettings = w90p910_set_link_ksettings,
-};
-
-static const struct net_device_ops w90p910_ether_netdev_ops = {
- .ndo_open = w90p910_ether_open,
- .ndo_stop = w90p910_ether_close,
- .ndo_start_xmit = w90p910_ether_start_xmit,
- .ndo_set_rx_mode = w90p910_ether_set_multicast_list,
- .ndo_set_mac_address = w90p910_set_mac_address,
- .ndo_do_ioctl = w90p910_ether_ioctl,
- .ndo_validate_addr = eth_validate_addr,
-};
-
-static void get_mac_address(struct net_device *dev)
-{
- struct w90p910_ether *ether = netdev_priv(dev);
- struct platform_device *pdev;
- char addr[ETH_ALEN];
-
- pdev = ether->pdev;
-
- addr[0] = 0x00;
- addr[1] = 0x02;
- addr[2] = 0xac;
- addr[3] = 0x55;
- addr[4] = 0x88;
- addr[5] = 0xa8;
-
- if (is_valid_ether_addr(addr))
- memcpy(dev->dev_addr, &addr, ETH_ALEN);
- else
- dev_err(&pdev->dev, "invalid mac address\n");
-}
-
-static int w90p910_ether_setup(struct net_device *dev)
-{
- struct w90p910_ether *ether = netdev_priv(dev);
-
- dev->netdev_ops = &w90p910_ether_netdev_ops;
- dev->ethtool_ops = &w90p910_ether_ethtool_ops;
-
- dev->tx_queue_len = 16;
- dev->dma = 0x0;
- dev->watchdog_timeo = TX_TIMEOUT;
-
- get_mac_address(dev);
-
- ether->cur_tx = 0x0;
- ether->cur_rx = 0x0;
- ether->finish_tx = 0x0;
- ether->linkflag = 0x0;
- ether->mii.phy_id = 0x01;
- ether->mii.phy_id_mask = 0x1f;
- ether->mii.reg_num_mask = 0x1f;
- ether->mii.dev = dev;
- ether->mii.mdio_read = w90p910_mdio_read;
- ether->mii.mdio_write = w90p910_mdio_write;
-
- timer_setup(&ether->check_timer, w90p910_check_link, 0);
-
- return 0;
-}
-
-static int w90p910_ether_probe(struct platform_device *pdev)
-{
- struct w90p910_ether *ether;
- struct net_device *dev;
- int error;
-
- dev = alloc_etherdev(sizeof(struct w90p910_ether));
- if (!dev)
- return -ENOMEM;
-
- ether = netdev_priv(dev);
-
- ether->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (ether->res == NULL) {
- dev_err(&pdev->dev, "failed to get I/O memory\n");
- error = -ENXIO;
- goto failed_free;
- }
-
- if (!request_mem_region(ether->res->start,
- resource_size(ether->res), pdev->name)) {
- dev_err(&pdev->dev, "failed to request I/O memory\n");
- error = -EBUSY;
- goto failed_free;
- }
-
- ether->reg = ioremap(ether->res->start, resource_size(ether->res));
- if (ether->reg == NULL) {
- dev_err(&pdev->dev, "failed to remap I/O memory\n");
- error = -ENXIO;
- goto failed_free_mem;
- }
-
- ether->txirq = platform_get_irq(pdev, 0);
- if (ether->txirq < 0) {
- dev_err(&pdev->dev, "failed to get ether tx irq\n");
- error = -ENXIO;
- goto failed_free_io;
- }
-
- ether->rxirq = platform_get_irq(pdev, 1);
- if (ether->rxirq < 0) {
- dev_err(&pdev->dev, "failed to get ether rx irq\n");
- error = -ENXIO;
- goto failed_free_io;
- }
-
- platform_set_drvdata(pdev, dev);
-
- ether->clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(ether->clk)) {
- dev_err(&pdev->dev, "failed to get ether clock\n");
- error = PTR_ERR(ether->clk);
- goto failed_free_io;
- }
-
- ether->rmiiclk = clk_get(&pdev->dev, "RMII");
- if (IS_ERR(ether->rmiiclk)) {
- dev_err(&pdev->dev, "failed to get ether clock\n");
- error = PTR_ERR(ether->rmiiclk);
- goto failed_put_clk;
- }
-
- ether->pdev = pdev;
-
- w90p910_ether_setup(dev);
-
- error = register_netdev(dev);
- if (error != 0) {
- dev_err(&pdev->dev, "Register EMC w90p910 FAILED\n");
- error = -ENODEV;
- goto failed_put_rmiiclk;
- }
-
- return 0;
-failed_put_rmiiclk:
- clk_put(ether->rmiiclk);
-failed_put_clk:
- clk_put(ether->clk);
-failed_free_io:
- iounmap(ether->reg);
-failed_free_mem:
- release_mem_region(ether->res->start, resource_size(ether->res));
-failed_free:
- free_netdev(dev);
- return error;
-}
-
-static int w90p910_ether_remove(struct platform_device *pdev)
-{
- struct net_device *dev = platform_get_drvdata(pdev);
- struct w90p910_ether *ether = netdev_priv(dev);
-
- unregister_netdev(dev);
-
- clk_put(ether->rmiiclk);
- clk_put(ether->clk);
-
- iounmap(ether->reg);
- release_mem_region(ether->res->start, resource_size(ether->res));
-
- del_timer_sync(&ether->check_timer);
-
- free_netdev(dev);
- return 0;
-}
-
-static struct platform_driver w90p910_ether_driver = {
- .probe = w90p910_ether_probe,
- .remove = w90p910_ether_remove,
- .driver = {
- .name = "nuc900-emc",
- },
-};
-
-module_platform_driver(w90p910_ether_driver);
-
-MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
-MODULE_DESCRIPTION("w90p910 MAC driver!");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:nuc900-emc");
-
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 21efb7d39d62..7b07281aa0ae 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -116,9 +116,20 @@ config RESET_QCOM_PDC
to control reset signals provided by PDC for Modem, Compute,
Display, GPU, Debug, AOP, Sensors, Audio, SP and APPS.
+config RESET_SCMI
+ tristate "Reset driver controlled via ARM SCMI interface"
+ depends on ARM_SCMI_PROTOCOL || COMPILE_TEST
+ default ARM_SCMI_PROTOCOL
+ help
+ This driver provides support for reset signal/domains that are
+ controlled by firmware that implements the SCMI interface.
+
+ This driver uses SCMI Message Protocol to interact with the
+ firmware controlling all the reset signals.
+
config RESET_SIMPLE
bool "Simple Reset Controller Driver" if COMPILE_TEST
- default ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED || ARCH_BITMAIN
+ default ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED || ARCH_BITMAIN || ARC
help
This enables a simple reset controller driver for reset lines that
that can be asserted and deasserted by toggling bits in a contiguous,
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 61456b8f659c..cf60ce526064 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o
obj-$(CONFIG_RESET_QCOM_PDC) += reset-qcom-pdc.o
+obj-$(CONFIG_RESET_SCMI) += reset-scmi.o
obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
obj-$(CONFIG_RESET_STM32MP157) += reset-stm32mp1.o
obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
diff --git a/drivers/reset/reset-imx7.c b/drivers/reset/reset-imx7.c
index 3ecd770f910b..1443a55a0c29 100644
--- a/drivers/reset/reset-imx7.c
+++ b/drivers/reset/reset-imx7.c
@@ -169,9 +169,9 @@ static const struct imx7_src_signal imx8mq_src_signals[IMX8MQ_RESET_NUM] = {
[IMX8MQ_RESET_OTG2_PHY_RESET] = { SRC_USBOPHY2_RCR, BIT(0) },
[IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N] = { SRC_MIPIPHY_RCR, BIT(1) },
[IMX8MQ_RESET_MIPI_DSI_RESET_N] = { SRC_MIPIPHY_RCR, BIT(2) },
- [IMX8MQ_RESET_MIPI_DIS_DPI_RESET_N] = { SRC_MIPIPHY_RCR, BIT(3) },
- [IMX8MQ_RESET_MIPI_DIS_ESC_RESET_N] = { SRC_MIPIPHY_RCR, BIT(4) },
- [IMX8MQ_RESET_MIPI_DIS_PCLK_RESET_N] = { SRC_MIPIPHY_RCR, BIT(5) },
+ [IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N] = { SRC_MIPIPHY_RCR, BIT(3) },
+ [IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N] = { SRC_MIPIPHY_RCR, BIT(4) },
+ [IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N] = { SRC_MIPIPHY_RCR, BIT(5) },
[IMX8MQ_RESET_PCIEPHY] = { SRC_PCIEPHY_RCR,
BIT(2) | BIT(1) },
[IMX8MQ_RESET_PCIEPHY_PERST] = { SRC_PCIEPHY_RCR, BIT(3) },
@@ -220,9 +220,9 @@ static int imx8mq_reset_set(struct reset_controller_dev *rcdev,
case IMX8MQ_RESET_PCIE_CTRL_APPS_EN:
case IMX8MQ_RESET_PCIE2_CTRL_APPS_EN: /* fallthrough */
- case IMX8MQ_RESET_MIPI_DIS_PCLK_RESET_N: /* fallthrough */
- case IMX8MQ_RESET_MIPI_DIS_ESC_RESET_N: /* fallthrough */
- case IMX8MQ_RESET_MIPI_DIS_DPI_RESET_N: /* fallthrough */
+ case IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N: /* fallthrough */
+ case IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N: /* fallthrough */
+ case IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N: /* fallthrough */
case IMX8MQ_RESET_MIPI_DSI_RESET_N: /* fallthrough */
case IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N: /* fallthrough */
value = assert ? 0 : bit;
diff --git a/drivers/reset/reset-meson.c b/drivers/reset/reset-meson.c
index 5242e0679df7..7d05d766e1ea 100644
--- a/drivers/reset/reset-meson.c
+++ b/drivers/reset/reset-meson.c
@@ -1,58 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
/*
* Amlogic Meson Reset Controller driver
*
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright (c) 2016 BayLibre, SAS.
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see <http://www.gnu.org/licenses/>.
- * The full GNU General Public License is included in this distribution
- * in the file called COPYING.
- *
- * BSD LICENSE
- *
* Copyright (c) 2016 BayLibre, SAS.
* Author: Neil Armstrong <narmstrong@baylibre.com>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <linux/err.h>
#include <linux/init.h>
diff --git a/drivers/reset/reset-scmi.c b/drivers/reset/reset-scmi.c
new file mode 100644
index 000000000000..c6d3c8427f14
--- /dev/null
+++ b/drivers/reset/reset-scmi.c
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM System Control and Management Interface (ARM SCMI) reset driver
+ *
+ * Copyright (C) 2019 ARM Ltd.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/device.h>
+#include <linux/reset-controller.h>
+#include <linux/scmi_protocol.h>
+
+/**
+ * struct scmi_reset_data - reset controller information structure
+ * @rcdev: reset controller entity
+ * @handle: ARM SCMI handle used for communication with system controller
+ */
+struct scmi_reset_data {
+ struct reset_controller_dev rcdev;
+ const struct scmi_handle *handle;
+};
+
+#define to_scmi_reset_data(p) container_of((p), struct scmi_reset_data, rcdev)
+#define to_scmi_handle(p) (to_scmi_reset_data(p)->handle)
+
+/**
+ * scmi_reset_assert() - assert device reset
+ * @rcdev: reset controller entity
+ * @id: ID of the reset to be asserted
+ *
+ * This function implements the reset driver op to assert a device's reset
+ * using the ARM SCMI protocol.
+ *
+ * Return: 0 for successful request, else a corresponding error value
+ */
+static int
+scmi_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+ const struct scmi_handle *handle = to_scmi_handle(rcdev);
+
+ return handle->reset_ops->assert(handle, id);
+}
+
+/**
+ * scmi_reset_deassert() - deassert device reset
+ * @rcdev: reset controller entity
+ * @id: ID of the reset to be deasserted
+ *
+ * This function implements the reset driver op to deassert a device's reset
+ * using the ARM SCMI protocol.
+ *
+ * Return: 0 for successful request, else a corresponding error value
+ */
+static int
+scmi_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+ const struct scmi_handle *handle = to_scmi_handle(rcdev);
+
+ return handle->reset_ops->deassert(handle, id);
+}
+
+/**
+ * scmi_reset_reset() - reset the device
+ * @rcdev: reset controller entity
+ * @id: ID of the reset signal to be reset(assert + deassert)
+ *
+ * This function implements the reset driver op to trigger a device's
+ * reset signal using the ARM SCMI protocol.
+ *
+ * Return: 0 for successful request, else a corresponding error value
+ */
+static int
+scmi_reset_reset(struct reset_controller_dev *rcdev, unsigned long id)
+{
+ const struct scmi_handle *handle = to_scmi_handle(rcdev);
+
+ return handle->reset_ops->reset(handle, id);
+}
+
+static const struct reset_control_ops scmi_reset_ops = {
+ .assert = scmi_reset_assert,
+ .deassert = scmi_reset_deassert,
+ .reset = scmi_reset_reset,
+};
+
+static int scmi_reset_probe(struct scmi_device *sdev)
+{
+ struct scmi_reset_data *data;
+ struct device *dev = &sdev->dev;
+ struct device_node *np = dev->of_node;
+ const struct scmi_handle *handle = sdev->handle;
+
+ if (!handle || !handle->reset_ops)
+ return -ENODEV;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->rcdev.ops = &scmi_reset_ops;
+ data->rcdev.owner = THIS_MODULE;
+ data->rcdev.of_node = np;
+ data->rcdev.nr_resets = handle->reset_ops->num_domains_get(handle);
+
+ return devm_reset_controller_register(dev, &data->rcdev);
+}
+
+static const struct scmi_device_id scmi_id_table[] = {
+ { SCMI_PROTOCOL_RESET },
+ { },
+};
+MODULE_DEVICE_TABLE(scmi, scmi_id_table);
+
+static struct scmi_driver scmi_reset_driver = {
+ .name = "scmi-reset",
+ .probe = scmi_reset_probe,
+ .id_table = scmi_id_table,
+};
+module_scmi_driver(scmi_reset_driver);
+
+MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>");
+MODULE_DESCRIPTION("ARM SCMI reset controller driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/reset/reset-simple.c b/drivers/reset/reset-simple.c
index 1154f7b1f4dd..067e7e7b34f1 100644
--- a/drivers/reset/reset-simple.c
+++ b/drivers/reset/reset-simple.c
@@ -127,6 +127,9 @@ static const struct of_device_id reset_simple_dt_ids[] = {
{ .compatible = "aspeed,ast2500-lpc-reset" },
{ .compatible = "bitmain,bm1880-reset",
.data = &reset_simple_active_low },
+ { .compatible = "snps,dw-high-reset" },
+ { .compatible = "snps,dw-low-reset",
+ .data = &reset_simple_active_low },
{ /* sentinel */ },
};
diff --git a/drivers/soc/amlogic/Kconfig b/drivers/soc/amlogic/Kconfig
index 23bfb8ef4fdb..bc2c912949bd 100644
--- a/drivers/soc/amlogic/Kconfig
+++ b/drivers/soc/amlogic/Kconfig
@@ -37,6 +37,17 @@ config MESON_GX_PM_DOMAINS
Say yes to expose Amlogic Meson GX Power Domains as
Generic Power Domains.
+config MESON_EE_PM_DOMAINS
+ bool "Amlogic Meson Everything-Else Power Domains driver"
+ depends on ARCH_MESON || COMPILE_TEST
+ depends on PM && OF
+ default ARCH_MESON
+ select PM_GENERIC_DOMAINS
+ select PM_GENERIC_DOMAINS_OF
+ help
+ Say yes to expose Amlogic Meson Everything-Else Power Domains as
+ Generic Power Domains.
+
config MESON_MX_SOCINFO
bool "Amlogic Meson MX SoC Information driver"
depends on ARCH_MESON || COMPILE_TEST
diff --git a/drivers/soc/amlogic/Makefile b/drivers/soc/amlogic/Makefile
index f2e4ed171297..de79d044b545 100644
--- a/drivers/soc/amlogic/Makefile
+++ b/drivers/soc/amlogic/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_MESON_CLK_MEASURE) += meson-clk-measure.o
obj-$(CONFIG_MESON_GX_SOCINFO) += meson-gx-socinfo.o
obj-$(CONFIG_MESON_GX_PM_DOMAINS) += meson-gx-pwrc-vpu.o
obj-$(CONFIG_MESON_MX_SOCINFO) += meson-mx-socinfo.o
+obj-$(CONFIG_MESON_EE_PM_DOMAINS) += meson-ee-pwrc.o
diff --git a/drivers/soc/amlogic/meson-clk-measure.c b/drivers/soc/amlogic/meson-clk-measure.c
index 19d4cbc93a17..0fa47d77577d 100644
--- a/drivers/soc/amlogic/meson-clk-measure.c
+++ b/drivers/soc/amlogic/meson-clk-measure.c
@@ -11,6 +11,8 @@
#include <linux/debugfs.h>
#include <linux/regmap.h>
+static DEFINE_MUTEX(measure_lock);
+
#define MSR_CLK_DUTY 0x0
#define MSR_CLK_REG0 0x4
#define MSR_CLK_REG1 0x8
@@ -322,6 +324,8 @@ static struct meson_msr_id clk_msr_g12a[CLK_MSR_MAX] = {
CLK_MSR_ID(84, "co_tx"),
CLK_MSR_ID(89, "hdmi_todig"),
CLK_MSR_ID(90, "hdmitx_sys"),
+ CLK_MSR_ID(91, "sys_cpub_div16"),
+ CLK_MSR_ID(92, "sys_pll_cpub_div16"),
CLK_MSR_ID(94, "eth_phy_rx"),
CLK_MSR_ID(95, "eth_phy_pll"),
CLK_MSR_ID(96, "vpu_b"),
@@ -353,6 +357,136 @@ static struct meson_msr_id clk_msr_g12a[CLK_MSR_MAX] = {
CLK_MSR_ID(122, "audio_pdm_dclk"),
};
+static struct meson_msr_id clk_msr_sm1[CLK_MSR_MAX] = {
+ CLK_MSR_ID(0, "ring_osc_out_ee_0"),
+ CLK_MSR_ID(1, "ring_osc_out_ee_1"),
+ CLK_MSR_ID(2, "ring_osc_out_ee_2"),
+ CLK_MSR_ID(3, "ring_osc_out_ee_3"),
+ CLK_MSR_ID(4, "gp0_pll"),
+ CLK_MSR_ID(5, "gp1_pll"),
+ CLK_MSR_ID(6, "enci"),
+ CLK_MSR_ID(7, "clk81"),
+ CLK_MSR_ID(8, "encp"),
+ CLK_MSR_ID(9, "encl"),
+ CLK_MSR_ID(10, "vdac"),
+ CLK_MSR_ID(11, "eth_tx"),
+ CLK_MSR_ID(12, "hifi_pll"),
+ CLK_MSR_ID(13, "mod_tcon"),
+ CLK_MSR_ID(14, "fec_0"),
+ CLK_MSR_ID(15, "fec_1"),
+ CLK_MSR_ID(16, "fec_2"),
+ CLK_MSR_ID(17, "sys_pll_div16"),
+ CLK_MSR_ID(18, "sys_cpu_div16"),
+ CLK_MSR_ID(19, "lcd_an_ph2"),
+ CLK_MSR_ID(20, "rtc_osc_out"),
+ CLK_MSR_ID(21, "lcd_an_ph3"),
+ CLK_MSR_ID(22, "eth_phy_ref"),
+ CLK_MSR_ID(23, "mpll_50m"),
+ CLK_MSR_ID(24, "eth_125m"),
+ CLK_MSR_ID(25, "eth_rmii"),
+ CLK_MSR_ID(26, "sc_int"),
+ CLK_MSR_ID(27, "in_mac"),
+ CLK_MSR_ID(28, "sar_adc"),
+ CLK_MSR_ID(29, "pcie_inp"),
+ CLK_MSR_ID(30, "pcie_inn"),
+ CLK_MSR_ID(31, "mpll_test_out"),
+ CLK_MSR_ID(32, "vdec"),
+ CLK_MSR_ID(34, "eth_mpll_50m"),
+ CLK_MSR_ID(35, "mali"),
+ CLK_MSR_ID(36, "hdmi_tx_pixel"),
+ CLK_MSR_ID(37, "cdac"),
+ CLK_MSR_ID(38, "vdin_meas"),
+ CLK_MSR_ID(39, "bt656"),
+ CLK_MSR_ID(40, "arm_ring_osc_out_4"),
+ CLK_MSR_ID(41, "eth_rx_or_rmii"),
+ CLK_MSR_ID(42, "mp0_out"),
+ CLK_MSR_ID(43, "fclk_div5"),
+ CLK_MSR_ID(44, "pwm_b"),
+ CLK_MSR_ID(45, "pwm_a"),
+ CLK_MSR_ID(46, "vpu"),
+ CLK_MSR_ID(47, "ddr_dpll_pt"),
+ CLK_MSR_ID(48, "mp1_out"),
+ CLK_MSR_ID(49, "mp2_out"),
+ CLK_MSR_ID(50, "mp3_out"),
+ CLK_MSR_ID(51, "sd_emmc_c"),
+ CLK_MSR_ID(52, "sd_emmc_b"),
+ CLK_MSR_ID(53, "sd_emmc_a"),
+ CLK_MSR_ID(54, "vpu_clkc"),
+ CLK_MSR_ID(55, "vid_pll_div_out"),
+ CLK_MSR_ID(56, "wave420l_a"),
+ CLK_MSR_ID(57, "wave420l_c"),
+ CLK_MSR_ID(58, "wave420l_b"),
+ CLK_MSR_ID(59, "hcodec"),
+ CLK_MSR_ID(60, "arm_ring_osc_out_5"),
+ CLK_MSR_ID(61, "gpio_msr"),
+ CLK_MSR_ID(62, "hevcb"),
+ CLK_MSR_ID(63, "dsi_meas"),
+ CLK_MSR_ID(64, "spicc_1"),
+ CLK_MSR_ID(65, "spicc_0"),
+ CLK_MSR_ID(66, "vid_lock"),
+ CLK_MSR_ID(67, "dsi_phy"),
+ CLK_MSR_ID(68, "hdcp22_esm"),
+ CLK_MSR_ID(69, "hdcp22_skp"),
+ CLK_MSR_ID(70, "pwm_f"),
+ CLK_MSR_ID(71, "pwm_e"),
+ CLK_MSR_ID(72, "pwm_d"),
+ CLK_MSR_ID(73, "pwm_c"),
+ CLK_MSR_ID(74, "arm_ring_osc_out_6"),
+ CLK_MSR_ID(75, "hevcf"),
+ CLK_MSR_ID(76, "arm_ring_osc_out_7"),
+ CLK_MSR_ID(77, "rng_ring_osc_0"),
+ CLK_MSR_ID(78, "rng_ring_osc_1"),
+ CLK_MSR_ID(79, "rng_ring_osc_2"),
+ CLK_MSR_ID(80, "rng_ring_osc_3"),
+ CLK_MSR_ID(81, "vapb"),
+ CLK_MSR_ID(82, "ge2d"),
+ CLK_MSR_ID(83, "co_rx"),
+ CLK_MSR_ID(84, "co_tx"),
+ CLK_MSR_ID(85, "arm_ring_osc_out_8"),
+ CLK_MSR_ID(86, "arm_ring_osc_out_9"),
+ CLK_MSR_ID(87, "mipi_dsi_phy"),
+ CLK_MSR_ID(88, "cis2_adapt"),
+ CLK_MSR_ID(89, "hdmi_todig"),
+ CLK_MSR_ID(90, "hdmitx_sys"),
+ CLK_MSR_ID(91, "nna_core"),
+ CLK_MSR_ID(92, "nna_axi"),
+ CLK_MSR_ID(93, "vad"),
+ CLK_MSR_ID(94, "eth_phy_rx"),
+ CLK_MSR_ID(95, "eth_phy_pll"),
+ CLK_MSR_ID(96, "vpu_b"),
+ CLK_MSR_ID(97, "cpu_b_tmp"),
+ CLK_MSR_ID(98, "ts"),
+ CLK_MSR_ID(99, "arm_ring_osc_out_10"),
+ CLK_MSR_ID(100, "arm_ring_osc_out_11"),
+ CLK_MSR_ID(101, "arm_ring_osc_out_12"),
+ CLK_MSR_ID(102, "arm_ring_osc_out_13"),
+ CLK_MSR_ID(103, "arm_ring_osc_out_14"),
+ CLK_MSR_ID(104, "arm_ring_osc_out_15"),
+ CLK_MSR_ID(105, "arm_ring_osc_out_16"),
+ CLK_MSR_ID(106, "ephy_test"),
+ CLK_MSR_ID(107, "au_dac_g128x"),
+ CLK_MSR_ID(108, "audio_locker_out"),
+ CLK_MSR_ID(109, "audio_locker_in"),
+ CLK_MSR_ID(110, "audio_tdmout_c_sclk"),
+ CLK_MSR_ID(111, "audio_tdmout_b_sclk"),
+ CLK_MSR_ID(112, "audio_tdmout_a_sclk"),
+ CLK_MSR_ID(113, "audio_tdmin_lb_sclk"),
+ CLK_MSR_ID(114, "audio_tdmin_c_sclk"),
+ CLK_MSR_ID(115, "audio_tdmin_b_sclk"),
+ CLK_MSR_ID(116, "audio_tdmin_a_sclk"),
+ CLK_MSR_ID(117, "audio_resample"),
+ CLK_MSR_ID(118, "audio_pdm_sys"),
+ CLK_MSR_ID(119, "audio_spdifout_b"),
+ CLK_MSR_ID(120, "audio_spdifout"),
+ CLK_MSR_ID(121, "audio_spdifin"),
+ CLK_MSR_ID(122, "audio_pdm_dclk"),
+ CLK_MSR_ID(123, "audio_resampled"),
+ CLK_MSR_ID(124, "earcrx_pll"),
+ CLK_MSR_ID(125, "earcrx_pll_test"),
+ CLK_MSR_ID(126, "csi_phy0"),
+ CLK_MSR_ID(127, "csi2_data"),
+};
+
static int meson_measure_id(struct meson_msr_id *clk_msr_id,
unsigned int duration)
{
@@ -360,6 +494,10 @@ static int meson_measure_id(struct meson_msr_id *clk_msr_id,
unsigned int val;
int ret;
+ ret = mutex_lock_interruptible(&measure_lock);
+ if (ret)
+ return ret;
+
regmap_write(priv->regmap, MSR_CLK_REG0, 0);
/* Set measurement duration */
@@ -377,8 +515,10 @@ static int meson_measure_id(struct meson_msr_id *clk_msr_id,
ret = regmap_read_poll_timeout(priv->regmap, MSR_CLK_REG0,
val, !(val & MSR_BUSY), 10, 10000);
- if (ret)
+ if (ret) {
+ mutex_unlock(&measure_lock);
return ret;
+ }
/* Disable */
regmap_update_bits(priv->regmap, MSR_CLK_REG0, MSR_ENABLE, 0);
@@ -386,6 +526,8 @@ static int meson_measure_id(struct meson_msr_id *clk_msr_id,
/* Get the value in multiple of gate time counts */
regmap_read(priv->regmap, MSR_CLK_REG2, &val);
+ mutex_unlock(&measure_lock);
+
if (val >= MSR_VAL_MASK)
return -EINVAL;
@@ -533,6 +675,10 @@ static const struct of_device_id meson_msr_match_table[] = {
.compatible = "amlogic,meson-g12a-clk-measure",
.data = (void *)clk_msr_g12a,
},
+ {
+ .compatible = "amlogic,meson-sm1-clk-measure",
+ .data = (void *)clk_msr_sm1,
+ },
{ /* sentinel */ }
};
diff --git a/drivers/soc/amlogic/meson-ee-pwrc.c b/drivers/soc/amlogic/meson-ee-pwrc.c
new file mode 100644
index 000000000000..5823f5b67d16
--- /dev/null
+++ b/drivers/soc/amlogic/meson-ee-pwrc.c
@@ -0,0 +1,492 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/bitfield.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_device.h>
+#include <linux/reset-controller.h>
+#include <linux/reset.h>
+#include <linux/clk.h>
+#include <dt-bindings/power/meson-g12a-power.h>
+#include <dt-bindings/power/meson-sm1-power.h>
+
+/* AO Offsets */
+
+#define AO_RTI_GEN_PWR_SLEEP0 (0x3a << 2)
+#define AO_RTI_GEN_PWR_ISO0 (0x3b << 2)
+
+/* HHI Offsets */
+
+#define HHI_MEM_PD_REG0 (0x40 << 2)
+#define HHI_VPU_MEM_PD_REG0 (0x41 << 2)
+#define HHI_VPU_MEM_PD_REG1 (0x42 << 2)
+#define HHI_VPU_MEM_PD_REG3 (0x43 << 2)
+#define HHI_VPU_MEM_PD_REG4 (0x44 << 2)
+#define HHI_AUDIO_MEM_PD_REG0 (0x45 << 2)
+#define HHI_NANOQ_MEM_PD_REG0 (0x46 << 2)
+#define HHI_NANOQ_MEM_PD_REG1 (0x47 << 2)
+#define HHI_VPU_MEM_PD_REG2 (0x4d << 2)
+
+struct meson_ee_pwrc;
+struct meson_ee_pwrc_domain;
+
+struct meson_ee_pwrc_mem_domain {
+ unsigned int reg;
+ unsigned int mask;
+};
+
+struct meson_ee_pwrc_top_domain {
+ unsigned int sleep_reg;
+ unsigned int sleep_mask;
+ unsigned int iso_reg;
+ unsigned int iso_mask;
+};
+
+struct meson_ee_pwrc_domain_desc {
+ char *name;
+ unsigned int reset_names_count;
+ unsigned int clk_names_count;
+ struct meson_ee_pwrc_top_domain *top_pd;
+ unsigned int mem_pd_count;
+ struct meson_ee_pwrc_mem_domain *mem_pd;
+ bool (*get_power)(struct meson_ee_pwrc_domain *pwrc_domain);
+};
+
+struct meson_ee_pwrc_domain_data {
+ unsigned int count;
+ struct meson_ee_pwrc_domain_desc *domains;
+};
+
+/* TOP Power Domains */
+
+static struct meson_ee_pwrc_top_domain g12a_pwrc_vpu = {
+ .sleep_reg = AO_RTI_GEN_PWR_SLEEP0,
+ .sleep_mask = BIT(8),
+ .iso_reg = AO_RTI_GEN_PWR_SLEEP0,
+ .iso_mask = BIT(9),
+};
+
+#define SM1_EE_PD(__bit) \
+ { \
+ .sleep_reg = AO_RTI_GEN_PWR_SLEEP0, \
+ .sleep_mask = BIT(__bit), \
+ .iso_reg = AO_RTI_GEN_PWR_ISO0, \
+ .iso_mask = BIT(__bit), \
+ }
+
+static struct meson_ee_pwrc_top_domain sm1_pwrc_vpu = SM1_EE_PD(8);
+static struct meson_ee_pwrc_top_domain sm1_pwrc_nna = SM1_EE_PD(16);
+static struct meson_ee_pwrc_top_domain sm1_pwrc_usb = SM1_EE_PD(17);
+static struct meson_ee_pwrc_top_domain sm1_pwrc_pci = SM1_EE_PD(18);
+static struct meson_ee_pwrc_top_domain sm1_pwrc_ge2d = SM1_EE_PD(19);
+
+/* Memory PD Domains */
+
+#define VPU_MEMPD(__reg) \
+ { __reg, GENMASK(1, 0) }, \
+ { __reg, GENMASK(3, 2) }, \
+ { __reg, GENMASK(5, 4) }, \
+ { __reg, GENMASK(7, 6) }, \
+ { __reg, GENMASK(9, 8) }, \
+ { __reg, GENMASK(11, 10) }, \
+ { __reg, GENMASK(13, 12) }, \
+ { __reg, GENMASK(15, 14) }, \
+ { __reg, GENMASK(17, 16) }, \
+ { __reg, GENMASK(19, 18) }, \
+ { __reg, GENMASK(21, 20) }, \
+ { __reg, GENMASK(23, 22) }, \
+ { __reg, GENMASK(25, 24) }, \
+ { __reg, GENMASK(27, 26) }, \
+ { __reg, GENMASK(29, 28) }, \
+ { __reg, GENMASK(31, 30) }
+
+#define VPU_HHI_MEMPD(__reg) \
+ { __reg, BIT(8) }, \
+ { __reg, BIT(9) }, \
+ { __reg, BIT(10) }, \
+ { __reg, BIT(11) }, \
+ { __reg, BIT(12) }, \
+ { __reg, BIT(13) }, \
+ { __reg, BIT(14) }, \
+ { __reg, BIT(15) }
+
+static struct meson_ee_pwrc_mem_domain g12a_pwrc_mem_vpu[] = {
+ VPU_MEMPD(HHI_VPU_MEM_PD_REG0),
+ VPU_MEMPD(HHI_VPU_MEM_PD_REG1),
+ VPU_MEMPD(HHI_VPU_MEM_PD_REG2),
+ VPU_HHI_MEMPD(HHI_MEM_PD_REG0),
+};
+
+static struct meson_ee_pwrc_mem_domain g12a_pwrc_mem_eth[] = {
+ { HHI_MEM_PD_REG0, GENMASK(3, 2) },
+};
+
+static struct meson_ee_pwrc_mem_domain sm1_pwrc_mem_vpu[] = {
+ VPU_MEMPD(HHI_VPU_MEM_PD_REG0),
+ VPU_MEMPD(HHI_VPU_MEM_PD_REG1),
+ VPU_MEMPD(HHI_VPU_MEM_PD_REG2),
+ VPU_MEMPD(HHI_VPU_MEM_PD_REG3),
+ { HHI_VPU_MEM_PD_REG4, GENMASK(1, 0) },
+ { HHI_VPU_MEM_PD_REG4, GENMASK(3, 2) },
+ { HHI_VPU_MEM_PD_REG4, GENMASK(5, 4) },
+ { HHI_VPU_MEM_PD_REG4, GENMASK(7, 6) },
+ VPU_HHI_MEMPD(HHI_MEM_PD_REG0),
+};
+
+static struct meson_ee_pwrc_mem_domain sm1_pwrc_mem_nna[] = {
+ { HHI_NANOQ_MEM_PD_REG0, 0xff },
+ { HHI_NANOQ_MEM_PD_REG1, 0xff },
+};
+
+static struct meson_ee_pwrc_mem_domain sm1_pwrc_mem_usb[] = {
+ { HHI_MEM_PD_REG0, GENMASK(31, 30) },
+};
+
+static struct meson_ee_pwrc_mem_domain sm1_pwrc_mem_pcie[] = {
+ { HHI_MEM_PD_REG0, GENMASK(29, 26) },
+};
+
+static struct meson_ee_pwrc_mem_domain sm1_pwrc_mem_ge2d[] = {
+ { HHI_MEM_PD_REG0, GENMASK(25, 18) },
+};
+
+static struct meson_ee_pwrc_mem_domain sm1_pwrc_mem_audio[] = {
+ { HHI_MEM_PD_REG0, GENMASK(5, 4) },
+ { HHI_AUDIO_MEM_PD_REG0, GENMASK(1, 0) },
+ { HHI_AUDIO_MEM_PD_REG0, GENMASK(3, 2) },
+ { HHI_AUDIO_MEM_PD_REG0, GENMASK(5, 4) },
+ { HHI_AUDIO_MEM_PD_REG0, GENMASK(7, 6) },
+ { HHI_AUDIO_MEM_PD_REG0, GENMASK(13, 12) },
+ { HHI_AUDIO_MEM_PD_REG0, GENMASK(15, 14) },
+ { HHI_AUDIO_MEM_PD_REG0, GENMASK(17, 16) },
+ { HHI_AUDIO_MEM_PD_REG0, GENMASK(19, 18) },
+ { HHI_AUDIO_MEM_PD_REG0, GENMASK(21, 20) },
+ { HHI_AUDIO_MEM_PD_REG0, GENMASK(23, 22) },
+ { HHI_AUDIO_MEM_PD_REG0, GENMASK(25, 24) },
+ { HHI_AUDIO_MEM_PD_REG0, GENMASK(27, 26) },
+};
+
+#define VPU_PD(__name, __top_pd, __mem, __get_power, __resets, __clks) \
+ { \
+ .name = __name, \
+ .reset_names_count = __resets, \
+ .clk_names_count = __clks, \
+ .top_pd = __top_pd, \
+ .mem_pd_count = ARRAY_SIZE(__mem), \
+ .mem_pd = __mem, \
+ .get_power = __get_power, \
+ }
+
+#define TOP_PD(__name, __top_pd, __mem, __get_power) \
+ { \
+ .name = __name, \
+ .top_pd = __top_pd, \
+ .mem_pd_count = ARRAY_SIZE(__mem), \
+ .mem_pd = __mem, \
+ .get_power = __get_power, \
+ }
+
+#define MEM_PD(__name, __mem) \
+ TOP_PD(__name, NULL, __mem, NULL)
+
+static bool pwrc_ee_get_power(struct meson_ee_pwrc_domain *pwrc_domain);
+
+static struct meson_ee_pwrc_domain_desc g12a_pwrc_domains[] = {
+ [PWRC_G12A_VPU_ID] = VPU_PD("VPU", &g12a_pwrc_vpu, g12a_pwrc_mem_vpu,
+ pwrc_ee_get_power, 11, 2),
+ [PWRC_G12A_ETH_ID] = MEM_PD("ETH", g12a_pwrc_mem_eth),
+};
+
+static struct meson_ee_pwrc_domain_desc sm1_pwrc_domains[] = {
+ [PWRC_SM1_VPU_ID] = VPU_PD("VPU", &sm1_pwrc_vpu, sm1_pwrc_mem_vpu,
+ pwrc_ee_get_power, 11, 2),
+ [PWRC_SM1_NNA_ID] = TOP_PD("NNA", &sm1_pwrc_nna, sm1_pwrc_mem_nna,
+ pwrc_ee_get_power),
+ [PWRC_SM1_USB_ID] = TOP_PD("USB", &sm1_pwrc_usb, sm1_pwrc_mem_usb,
+ pwrc_ee_get_power),
+ [PWRC_SM1_PCIE_ID] = TOP_PD("PCI", &sm1_pwrc_pci, sm1_pwrc_mem_pcie,
+ pwrc_ee_get_power),
+ [PWRC_SM1_GE2D_ID] = TOP_PD("GE2D", &sm1_pwrc_ge2d, sm1_pwrc_mem_ge2d,
+ pwrc_ee_get_power),
+ [PWRC_SM1_AUDIO_ID] = MEM_PD("AUDIO", sm1_pwrc_mem_audio),
+ [PWRC_SM1_ETH_ID] = MEM_PD("ETH", g12a_pwrc_mem_eth),
+};
+
+struct meson_ee_pwrc_domain {
+ struct generic_pm_domain base;
+ bool enabled;
+ struct meson_ee_pwrc *pwrc;
+ struct meson_ee_pwrc_domain_desc desc;
+ struct clk_bulk_data *clks;
+ int num_clks;
+ struct reset_control *rstc;
+ int num_rstc;
+};
+
+struct meson_ee_pwrc {
+ struct regmap *regmap_ao;
+ struct regmap *regmap_hhi;
+ struct meson_ee_pwrc_domain *domains;
+ struct genpd_onecell_data xlate;
+};
+
+static bool pwrc_ee_get_power(struct meson_ee_pwrc_domain *pwrc_domain)
+{
+ u32 reg;
+
+ regmap_read(pwrc_domain->pwrc->regmap_ao,
+ pwrc_domain->desc.top_pd->sleep_reg, &reg);
+
+ return (reg & pwrc_domain->desc.top_pd->sleep_mask);
+}
+
+static int meson_ee_pwrc_off(struct generic_pm_domain *domain)
+{
+ struct meson_ee_pwrc_domain *pwrc_domain =
+ container_of(domain, struct meson_ee_pwrc_domain, base);
+ int i;
+
+ if (pwrc_domain->desc.top_pd)
+ regmap_update_bits(pwrc_domain->pwrc->regmap_ao,
+ pwrc_domain->desc.top_pd->sleep_reg,
+ pwrc_domain->desc.top_pd->sleep_mask,
+ pwrc_domain->desc.top_pd->sleep_mask);
+ udelay(20);
+
+ for (i = 0 ; i < pwrc_domain->desc.mem_pd_count ; ++i)
+ regmap_update_bits(pwrc_domain->pwrc->regmap_hhi,
+ pwrc_domain->desc.mem_pd[i].reg,
+ pwrc_domain->desc.mem_pd[i].mask,
+ pwrc_domain->desc.mem_pd[i].mask);
+
+ udelay(20);
+
+ if (pwrc_domain->desc.top_pd)
+ regmap_update_bits(pwrc_domain->pwrc->regmap_ao,
+ pwrc_domain->desc.top_pd->iso_reg,
+ pwrc_domain->desc.top_pd->iso_mask,
+ pwrc_domain->desc.top_pd->iso_mask);
+
+ if (pwrc_domain->num_clks) {
+ msleep(20);
+ clk_bulk_disable_unprepare(pwrc_domain->num_clks,
+ pwrc_domain->clks);
+ }
+
+ return 0;
+}
+
+static int meson_ee_pwrc_on(struct generic_pm_domain *domain)
+{
+ struct meson_ee_pwrc_domain *pwrc_domain =
+ container_of(domain, struct meson_ee_pwrc_domain, base);
+ int i, ret;
+
+ if (pwrc_domain->desc.top_pd)
+ regmap_update_bits(pwrc_domain->pwrc->regmap_ao,
+ pwrc_domain->desc.top_pd->sleep_reg,
+ pwrc_domain->desc.top_pd->sleep_mask, 0);
+ udelay(20);
+
+ for (i = 0 ; i < pwrc_domain->desc.mem_pd_count ; ++i)
+ regmap_update_bits(pwrc_domain->pwrc->regmap_hhi,
+ pwrc_domain->desc.mem_pd[i].reg,
+ pwrc_domain->desc.mem_pd[i].mask, 0);
+
+ udelay(20);
+
+ ret = reset_control_assert(pwrc_domain->rstc);
+ if (ret)
+ return ret;
+
+ if (pwrc_domain->desc.top_pd)
+ regmap_update_bits(pwrc_domain->pwrc->regmap_ao,
+ pwrc_domain->desc.top_pd->iso_reg,
+ pwrc_domain->desc.top_pd->iso_mask, 0);
+
+ ret = reset_control_deassert(pwrc_domain->rstc);
+ if (ret)
+ return ret;
+
+ return clk_bulk_prepare_enable(pwrc_domain->num_clks,
+ pwrc_domain->clks);
+}
+
+static int meson_ee_pwrc_init_domain(struct platform_device *pdev,
+ struct meson_ee_pwrc *pwrc,
+ struct meson_ee_pwrc_domain *dom)
+{
+ dom->pwrc = pwrc;
+ dom->num_rstc = dom->desc.reset_names_count;
+ dom->num_clks = dom->desc.clk_names_count;
+
+ if (dom->num_rstc) {
+ int count = reset_control_get_count(&pdev->dev);
+
+ if (count != dom->num_rstc)
+ dev_warn(&pdev->dev, "Invalid resets count %d for domain %s\n",
+ count, dom->desc.name);
+
+ dom->rstc = devm_reset_control_array_get(&pdev->dev, false,
+ false);
+ if (IS_ERR(dom->rstc))
+ return PTR_ERR(dom->rstc);
+ }
+
+ if (dom->num_clks) {
+ int ret = devm_clk_bulk_get_all(&pdev->dev, &dom->clks);
+ if (ret < 0)
+ return ret;
+
+ if (dom->num_clks != ret) {
+ dev_warn(&pdev->dev, "Invalid clocks count %d for domain %s\n",
+ ret, dom->desc.name);
+ dom->num_clks = ret;
+ }
+ }
+
+ dom->base.name = dom->desc.name;
+ dom->base.power_on = meson_ee_pwrc_on;
+ dom->base.power_off = meson_ee_pwrc_off;
+
+ /*
+ * TOFIX: This is a special case for the VPU power domain, which can
+ * be enabled previously by the bootloader. In this case the VPU
+ * pipeline may be functional but no driver maybe never attach
+ * to this power domain, and if the domain is disabled it could
+ * cause system errors. This is why the pm_domain_always_on_gov
+ * is used here.
+ * For the same reason, the clocks should be enabled in case
+ * we need to power the domain off, otherwise the internal clocks
+ * prepare/enable counters won't be in sync.
+ */
+ if (dom->num_clks && dom->desc.get_power && !dom->desc.get_power(dom)) {
+ int ret = clk_bulk_prepare_enable(dom->num_clks, dom->clks);
+ if (ret)
+ return ret;
+
+ pm_genpd_init(&dom->base, &pm_domain_always_on_gov, false);
+ } else
+ pm_genpd_init(&dom->base, NULL,
+ (dom->desc.get_power ?
+ dom->desc.get_power(dom) : true));
+
+ return 0;
+}
+
+static int meson_ee_pwrc_probe(struct platform_device *pdev)
+{
+ const struct meson_ee_pwrc_domain_data *match;
+ struct regmap *regmap_ao, *regmap_hhi;
+ struct meson_ee_pwrc *pwrc;
+ int i, ret;
+
+ match = of_device_get_match_data(&pdev->dev);
+ if (!match) {
+ dev_err(&pdev->dev, "failed to get match data\n");
+ return -ENODEV;
+ }
+
+ pwrc = devm_kzalloc(&pdev->dev, sizeof(*pwrc), GFP_KERNEL);
+ if (!pwrc)
+ return -ENOMEM;
+
+ pwrc->xlate.domains = devm_kcalloc(&pdev->dev, match->count,
+ sizeof(*pwrc->xlate.domains),
+ GFP_KERNEL);
+ if (!pwrc->xlate.domains)
+ return -ENOMEM;
+
+ pwrc->domains = devm_kcalloc(&pdev->dev, match->count,
+ sizeof(*pwrc->domains), GFP_KERNEL);
+ if (!pwrc->domains)
+ return -ENOMEM;
+
+ pwrc->xlate.num_domains = match->count;
+
+ regmap_hhi = syscon_node_to_regmap(of_get_parent(pdev->dev.of_node));
+ if (IS_ERR(regmap_hhi)) {
+ dev_err(&pdev->dev, "failed to get HHI regmap\n");
+ return PTR_ERR(regmap_hhi);
+ }
+
+ regmap_ao = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+ "amlogic,ao-sysctrl");
+ if (IS_ERR(regmap_ao)) {
+ dev_err(&pdev->dev, "failed to get AO regmap\n");
+ return PTR_ERR(regmap_ao);
+ }
+
+ pwrc->regmap_ao = regmap_ao;
+ pwrc->regmap_hhi = regmap_hhi;
+
+ platform_set_drvdata(pdev, pwrc);
+
+ for (i = 0 ; i < match->count ; ++i) {
+ struct meson_ee_pwrc_domain *dom = &pwrc->domains[i];
+
+ memcpy(&dom->desc, &match->domains[i], sizeof(dom->desc));
+
+ ret = meson_ee_pwrc_init_domain(pdev, pwrc, dom);
+ if (ret)
+ return ret;
+
+ pwrc->xlate.domains[i] = &dom->base;
+ }
+
+ of_genpd_add_provider_onecell(pdev->dev.of_node, &pwrc->xlate);
+
+ return 0;
+}
+
+static void meson_ee_pwrc_shutdown(struct platform_device *pdev)
+{
+ struct meson_ee_pwrc *pwrc = platform_get_drvdata(pdev);
+ int i;
+
+ for (i = 0 ; i < pwrc->xlate.num_domains ; ++i) {
+ struct meson_ee_pwrc_domain *dom = &pwrc->domains[i];
+
+ if (dom->desc.get_power && !dom->desc.get_power(dom))
+ meson_ee_pwrc_off(&dom->base);
+ }
+}
+
+static struct meson_ee_pwrc_domain_data meson_ee_g12a_pwrc_data = {
+ .count = ARRAY_SIZE(g12a_pwrc_domains),
+ .domains = g12a_pwrc_domains,
+};
+
+static struct meson_ee_pwrc_domain_data meson_ee_sm1_pwrc_data = {
+ .count = ARRAY_SIZE(sm1_pwrc_domains),
+ .domains = sm1_pwrc_domains,
+};
+
+static const struct of_device_id meson_ee_pwrc_match_table[] = {
+ {
+ .compatible = "amlogic,meson-g12a-pwrc",
+ .data = &meson_ee_g12a_pwrc_data,
+ },
+ {
+ .compatible = "amlogic,meson-sm1-pwrc",
+ .data = &meson_ee_sm1_pwrc_data,
+ },
+ { /* sentinel */ }
+};
+
+static struct platform_driver meson_ee_pwrc_driver = {
+ .probe = meson_ee_pwrc_probe,
+ .shutdown = meson_ee_pwrc_shutdown,
+ .driver = {
+ .name = "meson_ee_pwrc",
+ .of_match_table = meson_ee_pwrc_match_table,
+ },
+};
+builtin_platform_driver(meson_ee_pwrc_driver);
diff --git a/drivers/soc/amlogic/meson-gx-socinfo.c b/drivers/soc/amlogic/meson-gx-socinfo.c
index bca34954518e..6d0d04f163cb 100644
--- a/drivers/soc/amlogic/meson-gx-socinfo.c
+++ b/drivers/soc/amlogic/meson-gx-socinfo.c
@@ -39,6 +39,7 @@ static const struct meson_gx_soc_id {
{ "TXHD", 0x27 },
{ "G12A", 0x28 },
{ "G12B", 0x29 },
+ { "SM1", 0x2b },
};
static const struct meson_gx_package_id {
@@ -65,6 +66,8 @@ static const struct meson_gx_package_id {
{ "S905D2", 0x28, 0x10, 0xf0 },
{ "S905X2", 0x28, 0x40, 0xf0 },
{ "S922X", 0x29, 0x40, 0xf0 },
+ { "A311D", 0x29, 0x10, 0xf0 },
+ { "S905X3", 0x2b, 0x5, 0xf },
};
static inline unsigned int socinfo_to_major(u32 socinfo)
@@ -138,8 +141,10 @@ static int __init meson_gx_socinfo_init(void)
}
/* check if chip-id is available */
- if (!of_property_read_bool(np, "amlogic,has-chip-id"))
+ if (!of_property_read_bool(np, "amlogic,has-chip-id")) {
+ of_node_put(np);
return -ENODEV;
+ }
/* node should be a syscon */
regmap = syscon_node_to_regmap(np);
diff --git a/drivers/soc/fsl/dpaa2-console.c b/drivers/soc/fsl/dpaa2-console.c
index 9168d8ddc932..27243f706f37 100644
--- a/drivers/soc/fsl/dpaa2-console.c
+++ b/drivers/soc/fsl/dpaa2-console.c
@@ -73,7 +73,7 @@ static u64 get_mc_fw_base_address(void)
mcfbaregs = ioremap(mc_base_addr.start, resource_size(&mc_base_addr));
if (!mcfbaregs) {
- pr_err("could not map MC Firmaware Base registers\n");
+ pr_err("could not map MC Firmware Base registers\n");
return 0;
}
diff --git a/drivers/soc/fsl/dpio/dpio-service.c b/drivers/soc/fsl/dpio/dpio-service.c
index b9539ef2c3cd..518a8e081b49 100644
--- a/drivers/soc/fsl/dpio/dpio-service.c
+++ b/drivers/soc/fsl/dpio/dpio-service.c
@@ -305,8 +305,6 @@ void dpaa2_io_service_deregister(struct dpaa2_io *service,
list_del(&ctx->node);
spin_unlock_irqrestore(&d->lock_notifications, irqflags);
- if (dev)
- device_link_remove(dev, d->dev);
}
EXPORT_SYMBOL_GPL(dpaa2_io_service_deregister);
diff --git a/drivers/soc/fsl/guts.c b/drivers/soc/fsl/guts.c
index 1ef8068c8dd3..34810f9bb2ee 100644
--- a/drivers/soc/fsl/guts.c
+++ b/drivers/soc/fsl/guts.c
@@ -102,6 +102,11 @@ static const struct fsl_soc_die_attr fsl_soc_die[] = {
.svr = 0x87360000,
.mask = 0xff3f0000,
},
+ /* Die: LS1028A, SoC: LS1028A */
+ { .die = "LS1028A",
+ .svr = 0x870b0000,
+ .mask = 0xff3f0000,
+ },
{ },
};
@@ -224,6 +229,7 @@ static const struct of_device_id fsl_guts_of_match[] = {
{ .compatible = "fsl,ls1012a-dcfg", },
{ .compatible = "fsl,ls1046a-dcfg", },
{ .compatible = "fsl,lx2160a-dcfg", },
+ { .compatible = "fsl,ls1028a-dcfg", },
{}
};
MODULE_DEVICE_TABLE(of, fsl_guts_of_match);
diff --git a/drivers/soc/fsl/qbman/bman.c b/drivers/soc/fsl/qbman/bman.c
index f84ab596bde8..f4fb527d8301 100644
--- a/drivers/soc/fsl/qbman/bman.c
+++ b/drivers/soc/fsl/qbman/bman.c
@@ -635,30 +635,31 @@ int bman_p_irqsource_add(struct bman_portal *p, u32 bits)
return 0;
}
-static int bm_shutdown_pool(u32 bpid)
+int bm_shutdown_pool(u32 bpid)
{
+ int err = 0;
struct bm_mc_command *bm_cmd;
union bm_mc_result *bm_res;
+
+ struct bman_portal *p = get_affine_portal();
while (1) {
- struct bman_portal *p = get_affine_portal();
/* Acquire buffers until empty */
bm_cmd = bm_mc_start(&p->p);
bm_cmd->bpid = bpid;
bm_mc_commit(&p->p, BM_MCC_VERB_CMD_ACQUIRE | 1);
if (!bm_mc_result_timeout(&p->p, &bm_res)) {
- put_affine_portal();
pr_crit("BMan Acquire Command timedout\n");
- return -ETIMEDOUT;
+ err = -ETIMEDOUT;
+ goto done;
}
if (!(bm_res->verb & BM_MCR_VERB_ACQUIRE_BUFCOUNT)) {
- put_affine_portal();
/* Pool is empty */
- return 0;
+ goto done;
}
- put_affine_portal();
}
-
+done:
+ put_affine_portal();
return 0;
}
diff --git a/drivers/soc/fsl/qbman/bman_ccsr.c b/drivers/soc/fsl/qbman/bman_ccsr.c
index 7c3cc968053c..cb24a08be084 100644
--- a/drivers/soc/fsl/qbman/bman_ccsr.c
+++ b/drivers/soc/fsl/qbman/bman_ccsr.c
@@ -97,17 +97,40 @@ static void bm_get_version(u16 *id, u8 *major, u8 *minor)
/* signal transactions for FBPRs with higher priority */
#define FBPR_AR_RPRIO_HI BIT(30)
-static void bm_set_memory(u64 ba, u32 size)
+/* Track if probe has occurred and if cleanup is required */
+static int __bman_probed;
+static int __bman_requires_cleanup;
+
+
+static int bm_set_memory(u64 ba, u32 size)
{
+ u32 bar, bare;
u32 exp = ilog2(size);
/* choke if size isn't within range */
DPAA_ASSERT(size >= 4096 && size <= 1024*1024*1024 &&
is_power_of_2(size));
/* choke if '[e]ba' has lower-alignment than 'size' */
DPAA_ASSERT(!(ba & (size - 1)));
+
+ /* Check to see if BMan has already been initialized */
+ bar = bm_ccsr_in(REG_FBPR_BAR);
+ if (bar) {
+ /* Maker sure ba == what was programmed) */
+ bare = bm_ccsr_in(REG_FBPR_BARE);
+ if (bare != upper_32_bits(ba) || bar != lower_32_bits(ba)) {
+ pr_err("Attempted to reinitialize BMan with different BAR, got 0x%llx read BARE=0x%x BAR=0x%x\n",
+ ba, bare, bar);
+ return -ENOMEM;
+ }
+ pr_info("BMan BAR already configured\n");
+ __bman_requires_cleanup = 1;
+ return 1;
+ }
+
bm_ccsr_out(REG_FBPR_BARE, upper_32_bits(ba));
bm_ccsr_out(REG_FBPR_BAR, lower_32_bits(ba));
bm_ccsr_out(REG_FBPR_AR, exp - 1);
+ return 0;
}
/*
@@ -120,7 +143,6 @@ static void bm_set_memory(u64 ba, u32 size)
*/
static dma_addr_t fbpr_a;
static size_t fbpr_sz;
-static int __bman_probed;
static int bman_fbpr(struct reserved_mem *rmem)
{
@@ -173,6 +195,16 @@ int bman_is_probed(void)
}
EXPORT_SYMBOL_GPL(bman_is_probed);
+int bman_requires_cleanup(void)
+{
+ return __bman_requires_cleanup;
+}
+
+void bman_done_cleanup(void)
+{
+ __bman_requires_cleanup = 0;
+}
+
static int fsl_bman_probe(struct platform_device *pdev)
{
int ret, err_irq;
diff --git a/drivers/soc/fsl/qbman/bman_portal.c b/drivers/soc/fsl/qbman/bman_portal.c
index cf4f10d6f590..923c44063a9a 100644
--- a/drivers/soc/fsl/qbman/bman_portal.c
+++ b/drivers/soc/fsl/qbman/bman_portal.c
@@ -100,7 +100,7 @@ static int bman_portal_probe(struct platform_device *pdev)
struct device_node *node = dev->of_node;
struct bm_portal_config *pcfg;
struct resource *addr_phys[2];
- int irq, cpu, err;
+ int irq, cpu, err, i;
err = bman_is_probed();
if (!err)
@@ -135,10 +135,8 @@ static int bman_portal_probe(struct platform_device *pdev)
pcfg->cpu = -1;
irq = platform_get_irq(pdev, 0);
- if (irq <= 0) {
- dev_err(dev, "Can't get %pOF IRQ'\n", node);
+ if (irq <= 0)
goto err_ioremap1;
- }
pcfg->irq = irq;
pcfg->addr_virt_ce = memremap(addr_phys[0]->start,
@@ -178,6 +176,22 @@ static int bman_portal_probe(struct platform_device *pdev)
if (!cpu_online(cpu))
bman_offline_cpu(cpu);
+ if (__bman_portals_probed == 1 && bman_requires_cleanup()) {
+ /*
+ * BMan wasn't reset prior to boot (Kexec for example)
+ * Empty all the buffer pools so they are in reset state
+ */
+ for (i = 0; i < BM_POOL_MAX; i++) {
+ err = bm_shutdown_pool(i);
+ if (err) {
+ dev_err(dev, "Failed to shutdown bpool %d\n",
+ i);
+ goto err_portal_init;
+ }
+ }
+ bman_done_cleanup();
+ }
+
return 0;
err_portal_init:
diff --git a/drivers/soc/fsl/qbman/bman_priv.h b/drivers/soc/fsl/qbman/bman_priv.h
index 751ce90383b7..aa3981e04965 100644
--- a/drivers/soc/fsl/qbman/bman_priv.h
+++ b/drivers/soc/fsl/qbman/bman_priv.h
@@ -76,3 +76,8 @@ int bman_p_irqsource_add(struct bman_portal *p, u32 bits);
const struct bm_portal_config *
bman_get_bm_portal_config(const struct bman_portal *portal);
+
+int bman_requires_cleanup(void);
+void bman_done_cleanup(void);
+
+int bm_shutdown_pool(u32 bpid);
diff --git a/drivers/soc/fsl/qbman/dpaa_sys.c b/drivers/soc/fsl/qbman/dpaa_sys.c
index e6d48dccb8d5..9dd8bb571dbc 100644
--- a/drivers/soc/fsl/qbman/dpaa_sys.c
+++ b/drivers/soc/fsl/qbman/dpaa_sys.c
@@ -37,42 +37,53 @@
int qbman_init_private_mem(struct device *dev, int idx, dma_addr_t *addr,
size_t *size)
{
- int ret;
struct device_node *mem_node;
- u64 size64;
+ struct reserved_mem *rmem;
+ struct property *prop;
+ int len, err;
+ __be32 *res_array;
- ret = of_reserved_mem_device_init_by_idx(dev, dev->of_node, idx);
- if (ret) {
- dev_err(dev,
- "of_reserved_mem_device_init_by_idx(%d) failed 0x%x\n",
- idx, ret);
- return -ENODEV;
- }
- mem_node = of_parse_phandle(dev->of_node, "memory-region", 0);
- if (mem_node) {
- ret = of_property_read_u64(mem_node, "size", &size64);
- if (ret) {
- dev_err(dev, "of_address_to_resource fails 0x%x\n",
- ret);
- return -ENODEV;
- }
- *size = size64;
- } else {
+ mem_node = of_parse_phandle(dev->of_node, "memory-region", idx);
+ if (!mem_node) {
dev_err(dev, "No memory-region found for index %d\n", idx);
return -ENODEV;
}
- if (!dma_alloc_coherent(dev, *size, addr, 0)) {
- dev_err(dev, "DMA Alloc memory failed\n");
+ rmem = of_reserved_mem_lookup(mem_node);
+ if (!rmem) {
+ dev_err(dev, "of_reserved_mem_lookup() returned NULL\n");
return -ENODEV;
}
+ *addr = rmem->base;
+ *size = rmem->size;
/*
- * Disassociate the reserved memory area from the device
- * because a device can only have one DMA memory area. This
- * should be fine since the memory is allocated and initialized
- * and only ever accessed by the QBMan device from now on
+ * Check if the reg property exists - if not insert the node
+ * so upon kexec() the same memory region address will be preserved.
+ * This is needed because QBMan HW does not allow the base address/
+ * size to be modified once set.
*/
- of_reserved_mem_device_release(dev);
+ prop = of_find_property(mem_node, "reg", &len);
+ if (!prop) {
+ prop = devm_kzalloc(dev, sizeof(*prop), GFP_KERNEL);
+ if (!prop)
+ return -ENOMEM;
+ prop->value = res_array = devm_kzalloc(dev, sizeof(__be32) * 4,
+ GFP_KERNEL);
+ if (!prop->value)
+ return -ENOMEM;
+ res_array[0] = cpu_to_be32(upper_32_bits(*addr));
+ res_array[1] = cpu_to_be32(lower_32_bits(*addr));
+ res_array[2] = cpu_to_be32(upper_32_bits(*size));
+ res_array[3] = cpu_to_be32(lower_32_bits(*size));
+ prop->length = sizeof(__be32) * 4;
+ prop->name = devm_kstrdup(dev, "reg", GFP_KERNEL);
+ if (!prop->name)
+ return -ENOMEM;
+ err = of_add_property(mem_node, prop);
+ if (err)
+ return err;
+ }
+
return 0;
}
diff --git a/drivers/soc/fsl/qbman/qman.c b/drivers/soc/fsl/qbman/qman.c
index 636f83f781f5..bf68d86d80ee 100644
--- a/drivers/soc/fsl/qbman/qman.c
+++ b/drivers/soc/fsl/qbman/qman.c
@@ -1018,6 +1018,20 @@ static inline void put_affine_portal(void)
put_cpu_var(qman_affine_portal);
}
+
+static inline struct qman_portal *get_portal_for_channel(u16 channel)
+{
+ int i;
+
+ for (i = 0; i < num_possible_cpus(); i++) {
+ if (affine_portals[i] &&
+ affine_portals[i]->config->channel == channel)
+ return affine_portals[i];
+ }
+
+ return NULL;
+}
+
static struct workqueue_struct *qm_portal_wq;
int qman_dqrr_set_ithresh(struct qman_portal *portal, u8 ithresh)
@@ -1070,6 +1084,20 @@ int qman_wq_alloc(void)
return 0;
}
+
+void qman_enable_irqs(void)
+{
+ int i;
+
+ for (i = 0; i < num_possible_cpus(); i++) {
+ if (affine_portals[i]) {
+ qm_out(&affine_portals[i]->p, QM_REG_ISR, 0xffffffff);
+ qm_out(&affine_portals[i]->p, QM_REG_IIR, 0);
+ }
+
+ }
+}
+
/*
* This is what everything can wait on, even if it migrates to a different cpu
* to the one whose affine portal it is waiting on.
@@ -1164,6 +1192,7 @@ static int drain_mr_fqrni(struct qm_portal *p)
{
const union qm_mr_entry *msg;
loop:
+ qm_mr_pvb_update(p);
msg = qm_mr_current(p);
if (!msg) {
/*
@@ -1180,7 +1209,8 @@ loop:
* entries well before the ring has been fully consumed, so
* we're being *really* paranoid here.
*/
- msleep(1);
+ mdelay(1);
+ qm_mr_pvb_update(p);
msg = qm_mr_current(p);
if (!msg)
return 0;
@@ -1267,8 +1297,8 @@ static int qman_create_portal(struct qman_portal *portal,
qm_out(p, QM_REG_ISDR, isdr);
portal->irq_sources = 0;
qm_out(p, QM_REG_IER, 0);
- qm_out(p, QM_REG_ISR, 0xffffffff);
snprintf(portal->irqname, MAX_IRQNAME, IRQNAME, c->cpu);
+ qm_out(p, QM_REG_IIR, 1);
if (request_irq(c->irq, portal_isr, 0, portal->irqname, portal)) {
dev_err(c->dev, "request_irq() failed\n");
goto fail_irq;
@@ -1288,7 +1318,7 @@ static int qman_create_portal(struct qman_portal *portal,
isdr &= ~(QM_PIRQ_DQRI | QM_PIRQ_MRI);
qm_out(p, QM_REG_ISDR, isdr);
if (qm_dqrr_current(p)) {
- dev_err(c->dev, "DQRR unclean\n");
+ dev_dbg(c->dev, "DQRR unclean\n");
qm_dqrr_cdc_consume_n(p, 0xffff);
}
if (qm_mr_current(p) && drain_mr_fqrni(p)) {
@@ -1301,8 +1331,10 @@ static int qman_create_portal(struct qman_portal *portal,
}
/* Success */
portal->config = c;
+ qm_out(p, QM_REG_ISR, 0xffffffff);
qm_out(p, QM_REG_ISDR, 0);
- qm_out(p, QM_REG_IIR, 0);
+ if (!qman_requires_cleanup())
+ qm_out(p, QM_REG_IIR, 0);
/* Write a sane SDQCR */
qm_dqrr_sdqcr_set(p, portal->sdqcr);
return 0;
@@ -2581,9 +2613,9 @@ static int _qm_dqrr_consume_and_match(struct qm_portal *p, u32 fqid, int s,
#define qm_dqrr_drain_nomatch(p) \
_qm_dqrr_consume_and_match(p, 0, 0, false)
-static int qman_shutdown_fq(u32 fqid)
+int qman_shutdown_fq(u32 fqid)
{
- struct qman_portal *p;
+ struct qman_portal *p, *channel_portal;
struct device *dev;
union qm_mc_command *mcc;
union qm_mc_result *mcr;
@@ -2623,17 +2655,28 @@ static int qman_shutdown_fq(u32 fqid)
channel = qm_fqd_get_chan(&mcr->queryfq.fqd);
wq = qm_fqd_get_wq(&mcr->queryfq.fqd);
+ if (channel < qm_channel_pool1) {
+ channel_portal = get_portal_for_channel(channel);
+ if (channel_portal == NULL) {
+ dev_err(dev, "Can't find portal for dedicated channel 0x%x\n",
+ channel);
+ ret = -EIO;
+ goto out;
+ }
+ } else
+ channel_portal = p;
+
switch (state) {
case QM_MCR_NP_STATE_TEN_SCHED:
case QM_MCR_NP_STATE_TRU_SCHED:
case QM_MCR_NP_STATE_ACTIVE:
case QM_MCR_NP_STATE_PARKED:
orl_empty = 0;
- mcc = qm_mc_start(&p->p);
+ mcc = qm_mc_start(&channel_portal->p);
qm_fqid_set(&mcc->fq, fqid);
- qm_mc_commit(&p->p, QM_MCC_VERB_ALTER_RETIRE);
- if (!qm_mc_result_timeout(&p->p, &mcr)) {
- dev_err(dev, "QUERYFQ_NP timeout\n");
+ qm_mc_commit(&channel_portal->p, QM_MCC_VERB_ALTER_RETIRE);
+ if (!qm_mc_result_timeout(&channel_portal->p, &mcr)) {
+ dev_err(dev, "ALTER_RETIRE timeout\n");
ret = -ETIMEDOUT;
goto out;
}
@@ -2641,6 +2684,9 @@ static int qman_shutdown_fq(u32 fqid)
QM_MCR_VERB_ALTER_RETIRE);
res = mcr->result; /* Make a copy as we reuse MCR below */
+ if (res == QM_MCR_RESULT_OK)
+ drain_mr_fqrni(&channel_portal->p);
+
if (res == QM_MCR_RESULT_PENDING) {
/*
* Need to wait for the FQRN in the message ring, which
@@ -2670,21 +2716,25 @@ static int qman_shutdown_fq(u32 fqid)
}
/* Set the sdqcr to drain this channel */
if (channel < qm_channel_pool1)
- qm_dqrr_sdqcr_set(&p->p,
+ qm_dqrr_sdqcr_set(&channel_portal->p,
QM_SDQCR_TYPE_ACTIVE |
QM_SDQCR_CHANNELS_DEDICATED);
else
- qm_dqrr_sdqcr_set(&p->p,
+ qm_dqrr_sdqcr_set(&channel_portal->p,
QM_SDQCR_TYPE_ACTIVE |
QM_SDQCR_CHANNELS_POOL_CONV
(channel));
do {
/* Keep draining DQRR while checking the MR*/
- qm_dqrr_drain_nomatch(&p->p);
+ qm_dqrr_drain_nomatch(&channel_portal->p);
/* Process message ring too */
- found_fqrn = qm_mr_drain(&p->p, FQRN);
+ found_fqrn = qm_mr_drain(&channel_portal->p,
+ FQRN);
cpu_relax();
} while (!found_fqrn);
+ /* Restore SDQCR */
+ qm_dqrr_sdqcr_set(&channel_portal->p,
+ channel_portal->sdqcr);
}
if (res != QM_MCR_RESULT_OK &&
@@ -2715,9 +2765,8 @@ static int qman_shutdown_fq(u32 fqid)
* Wait for a dequeue and process the dequeues,
* making sure to empty the ring completely
*/
- } while (qm_dqrr_drain_wait(&p->p, fqid, FQ_EMPTY));
+ } while (!qm_dqrr_drain_wait(&p->p, fqid, FQ_EMPTY));
}
- qm_dqrr_sdqcr_set(&p->p, 0);
while (!orl_empty) {
/* Wait for the ORL to have been completely drained */
@@ -2754,7 +2803,7 @@ static int qman_shutdown_fq(u32 fqid)
DPAA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) ==
QM_MCR_VERB_ALTER_OOS);
- if (mcr->result) {
+ if (mcr->result != QM_MCR_RESULT_OK) {
dev_err(dev, "OOS fail: FQ 0x%x (0x%x)\n",
fqid, mcr->result);
ret = -EIO;
diff --git a/drivers/soc/fsl/qbman/qman_ccsr.c b/drivers/soc/fsl/qbman/qman_ccsr.c
index a6bb43007d03..157659fd033a 100644
--- a/drivers/soc/fsl/qbman/qman_ccsr.c
+++ b/drivers/soc/fsl/qbman/qman_ccsr.c
@@ -274,6 +274,7 @@ static u32 __iomem *qm_ccsr_start;
/* A SDQCR mask comprising all the available/visible pool channels */
static u32 qm_pools_sdqcr;
static int __qman_probed;
+static int __qman_requires_cleanup;
static inline u32 qm_ccsr_in(u32 offset)
{
@@ -340,19 +341,55 @@ static void qm_get_version(u16 *id, u8 *major, u8 *minor)
}
#define PFDR_AR_EN BIT(31)
-static void qm_set_memory(enum qm_memory memory, u64 ba, u32 size)
+static int qm_set_memory(enum qm_memory memory, u64 ba, u32 size)
{
+ void *ptr;
u32 offset = (memory == qm_memory_fqd) ? REG_FQD_BARE : REG_PFDR_BARE;
u32 exp = ilog2(size);
+ u32 bar, bare;
/* choke if size isn't within range */
DPAA_ASSERT((size >= 4096) && (size <= 1024*1024*1024) &&
is_power_of_2(size));
/* choke if 'ba' has lower-alignment than 'size' */
DPAA_ASSERT(!(ba & (size - 1)));
+
+ /* Check to see if QMan has already been initialized */
+ bar = qm_ccsr_in(offset + REG_offset_BAR);
+ if (bar) {
+ /* Maker sure ba == what was programmed) */
+ bare = qm_ccsr_in(offset);
+ if (bare != upper_32_bits(ba) || bar != lower_32_bits(ba)) {
+ pr_err("Attempted to reinitialize QMan with different BAR, got 0x%llx read BARE=0x%x BAR=0x%x\n",
+ ba, bare, bar);
+ return -ENOMEM;
+ }
+ __qman_requires_cleanup = 1;
+ /* Return 1 to indicate memory was previously programmed */
+ return 1;
+ }
+ /* Need to temporarily map the area to make sure it is zeroed */
+ ptr = memremap(ba, size, MEMREMAP_WB);
+ if (!ptr) {
+ pr_crit("memremap() of QMan private memory failed\n");
+ return -ENOMEM;
+ }
+ memset(ptr, 0, size);
+
+#ifdef CONFIG_PPC
+ /*
+ * PPC doesn't appear to flush the cache on memunmap() but the
+ * cache must be flushed since QMan does non coherent accesses
+ * to this memory
+ */
+ flush_dcache_range((unsigned long) ptr, (unsigned long) ptr+size);
+#endif
+ memunmap(ptr);
+
qm_ccsr_out(offset, upper_32_bits(ba));
qm_ccsr_out(offset + REG_offset_BAR, lower_32_bits(ba));
qm_ccsr_out(offset + REG_offset_AR, PFDR_AR_EN | (exp - 1));
+ return 0;
}
static void qm_set_pfdr_threshold(u32 th, u8 k)
@@ -455,7 +492,7 @@ RESERVEDMEM_OF_DECLARE(qman_pfdr, "fsl,qman-pfdr", qman_pfdr);
#endif
-static unsigned int qm_get_fqid_maxcnt(void)
+unsigned int qm_get_fqid_maxcnt(void)
{
return fqd_sz / 64;
}
@@ -571,12 +608,19 @@ static int qman_init_ccsr(struct device *dev)
int i, err;
/* FQD memory */
- qm_set_memory(qm_memory_fqd, fqd_a, fqd_sz);
+ err = qm_set_memory(qm_memory_fqd, fqd_a, fqd_sz);
+ if (err < 0)
+ return err;
/* PFDR memory */
- qm_set_memory(qm_memory_pfdr, pfdr_a, pfdr_sz);
- err = qm_init_pfdr(dev, 8, pfdr_sz / 64 - 8);
- if (err)
+ err = qm_set_memory(qm_memory_pfdr, pfdr_a, pfdr_sz);
+ if (err < 0)
return err;
+ /* Only initialize PFDRs if the QMan was not initialized before */
+ if (err == 0) {
+ err = qm_init_pfdr(dev, 8, pfdr_sz / 64 - 8);
+ if (err)
+ return err;
+ }
/* thresholds */
qm_set_pfdr_threshold(512, 64);
qm_set_sfdr_threshold(128);
@@ -693,6 +737,18 @@ int qman_is_probed(void)
}
EXPORT_SYMBOL_GPL(qman_is_probed);
+int qman_requires_cleanup(void)
+{
+ return __qman_requires_cleanup;
+}
+
+void qman_done_cleanup(void)
+{
+ qman_enable_irqs();
+ __qman_requires_cleanup = 0;
+}
+
+
static int fsl_qman_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
diff --git a/drivers/soc/fsl/qbman/qman_portal.c b/drivers/soc/fsl/qbman/qman_portal.c
index e2186b681d87..5685b6706893 100644
--- a/drivers/soc/fsl/qbman/qman_portal.c
+++ b/drivers/soc/fsl/qbman/qman_portal.c
@@ -233,7 +233,7 @@ static int qman_portal_probe(struct platform_device *pdev)
struct device_node *node = dev->of_node;
struct qm_portal_config *pcfg;
struct resource *addr_phys[2];
- int irq, cpu, err;
+ int irq, cpu, err, i;
u32 val;
err = qman_is_probed();
@@ -275,10 +275,8 @@ static int qman_portal_probe(struct platform_device *pdev)
pcfg->channel = val;
pcfg->cpu = -1;
irq = platform_get_irq(pdev, 0);
- if (irq <= 0) {
- dev_err(dev, "Can't get %pOF IRQ\n", node);
+ if (irq <= 0)
goto err_ioremap1;
- }
pcfg->irq = irq;
pcfg->addr_virt_ce = memremap(addr_phys[0]->start,
@@ -325,6 +323,22 @@ static int qman_portal_probe(struct platform_device *pdev)
if (!cpu_online(cpu))
qman_offline_cpu(cpu);
+ if (__qman_portals_probed == 1 && qman_requires_cleanup()) {
+ /*
+ * QMan wasn't reset prior to boot (Kexec for example)
+ * Empty all the frame queues so they are in reset state
+ */
+ for (i = 0; i < qm_get_fqid_maxcnt(); i++) {
+ err = qman_shutdown_fq(i);
+ if (err) {
+ dev_err(dev, "Failed to shutdown frame queue %d\n",
+ i);
+ goto err_portal_init;
+ }
+ }
+ qman_done_cleanup();
+ }
+
return 0;
err_portal_init:
diff --git a/drivers/soc/fsl/qbman/qman_priv.h b/drivers/soc/fsl/qbman/qman_priv.h
index 04515718cfd9..fd1cf543fb81 100644
--- a/drivers/soc/fsl/qbman/qman_priv.h
+++ b/drivers/soc/fsl/qbman/qman_priv.h
@@ -272,3 +272,11 @@ extern struct qman_portal *affine_portals[NR_CPUS];
extern struct qman_portal *qman_dma_portal;
const struct qm_portal_config *qman_get_qm_portal_config(
struct qman_portal *portal);
+
+unsigned int qm_get_fqid_maxcnt(void);
+
+int qman_shutdown_fq(u32 fqid);
+
+int qman_requires_cleanup(void);
+void qman_done_cleanup(void);
+void qman_enable_irqs(void);
diff --git a/drivers/soc/fsl/qe/qe.c b/drivers/soc/fsl/qe/qe.c
index c9519e62308c..417df7e19281 100644
--- a/drivers/soc/fsl/qe/qe.c
+++ b/drivers/soc/fsl/qe/qe.c
@@ -10,6 +10,7 @@
* General Purpose functions for the global management of the
* QUICC Engine (QE).
*/
+#include <linux/bitmap.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
@@ -39,29 +40,32 @@ static DEFINE_SPINLOCK(qe_lock);
DEFINE_SPINLOCK(cmxgcr_lock);
EXPORT_SYMBOL(cmxgcr_lock);
-/* QE snum state */
-enum qe_snum_state {
- QE_SNUM_STATE_USED,
- QE_SNUM_STATE_FREE
-};
-
-/* QE snum */
-struct qe_snum {
- u8 num;
- enum qe_snum_state state;
-};
-
/* We allocate this here because it is used almost exclusively for
* the communication processor devices.
*/
struct qe_immap __iomem *qe_immr;
EXPORT_SYMBOL(qe_immr);
-static struct qe_snum snums[QE_NUM_OF_SNUM]; /* Dynamically allocated SNUMs */
+static u8 snums[QE_NUM_OF_SNUM]; /* Dynamically allocated SNUMs */
+static DECLARE_BITMAP(snum_state, QE_NUM_OF_SNUM);
static unsigned int qe_num_of_snum;
static phys_addr_t qebase = -1;
+static struct device_node *qe_get_device_node(void)
+{
+ struct device_node *qe;
+
+ /*
+ * Newer device trees have an "fsl,qe" compatible property for the QE
+ * node, but we still need to support older device trees.
+ */
+ qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
+ if (qe)
+ return qe;
+ return of_find_node_by_type(NULL, "qe");
+}
+
static phys_addr_t get_qe_base(void)
{
struct device_node *qe;
@@ -71,12 +75,9 @@ static phys_addr_t get_qe_base(void)
if (qebase != -1)
return qebase;
- qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
- if (!qe) {
- qe = of_find_node_by_type(NULL, "qe");
- if (!qe)
- return qebase;
- }
+ qe = qe_get_device_node();
+ if (!qe)
+ return qebase;
ret = of_address_to_resource(qe, 0, &res);
if (!ret)
@@ -170,12 +171,9 @@ unsigned int qe_get_brg_clk(void)
if (brg_clk)
return brg_clk;
- qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
- if (!qe) {
- qe = of_find_node_by_type(NULL, "qe");
- if (!qe)
- return brg_clk;
- }
+ qe = qe_get_device_node();
+ if (!qe)
+ return brg_clk;
prop = of_get_property(qe, "brg-frequency", &size);
if (prop && size == sizeof(*prop))
@@ -281,7 +279,6 @@ EXPORT_SYMBOL(qe_clock_source);
*/
static void qe_snums_init(void)
{
- int i;
static const u8 snum_init_76[] = {
0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D,
0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89,
@@ -302,19 +299,39 @@ static void qe_snums_init(void)
0x28, 0x29, 0x38, 0x39, 0x48, 0x49, 0x58, 0x59,
0x68, 0x69, 0x78, 0x79, 0x80, 0x81,
};
- static const u8 *snum_init;
+ struct device_node *qe;
+ const u8 *snum_init;
+ int i;
- qe_num_of_snum = qe_get_num_of_snums();
+ bitmap_zero(snum_state, QE_NUM_OF_SNUM);
+ qe_num_of_snum = 28; /* The default number of snum for threads is 28 */
+ qe = qe_get_device_node();
+ if (qe) {
+ i = of_property_read_variable_u8_array(qe, "fsl,qe-snums",
+ snums, 1, QE_NUM_OF_SNUM);
+ if (i > 0) {
+ of_node_put(qe);
+ qe_num_of_snum = i;
+ return;
+ }
+ /*
+ * Fall back to legacy binding of using the value of
+ * fsl,qe-num-snums to choose one of the static arrays
+ * above.
+ */
+ of_property_read_u32(qe, "fsl,qe-num-snums", &qe_num_of_snum);
+ of_node_put(qe);
+ }
- if (qe_num_of_snum == 76)
+ if (qe_num_of_snum == 76) {
snum_init = snum_init_76;
- else
+ } else if (qe_num_of_snum == 28 || qe_num_of_snum == 46) {
snum_init = snum_init_46;
-
- for (i = 0; i < qe_num_of_snum; i++) {
- snums[i].num = snum_init[i];
- snums[i].state = QE_SNUM_STATE_FREE;
+ } else {
+ pr_err("QE: unsupported value of fsl,qe-num-snums: %u\n", qe_num_of_snum);
+ return;
}
+ memcpy(snums, snum_init, qe_num_of_snum);
}
int qe_get_snum(void)
@@ -324,12 +341,10 @@ int qe_get_snum(void)
int i;
spin_lock_irqsave(&qe_lock, flags);
- for (i = 0; i < qe_num_of_snum; i++) {
- if (snums[i].state == QE_SNUM_STATE_FREE) {
- snums[i].state = QE_SNUM_STATE_USED;
- snum = snums[i].num;
- break;
- }
+ i = find_first_zero_bit(snum_state, qe_num_of_snum);
+ if (i < qe_num_of_snum) {
+ set_bit(i, snum_state);
+ snum = snums[i];
}
spin_unlock_irqrestore(&qe_lock, flags);
@@ -339,14 +354,10 @@ EXPORT_SYMBOL(qe_get_snum);
void qe_put_snum(u8 snum)
{
- int i;
+ const u8 *p = memchr(snums, snum, qe_num_of_snum);
- for (i = 0; i < qe_num_of_snum; i++) {
- if (snums[i].num == snum) {
- snums[i].state = QE_SNUM_STATE_FREE;
- break;
- }
- }
+ if (p)
+ clear_bit(p - snums, snum_state);
}
EXPORT_SYMBOL(qe_put_snum);
@@ -572,16 +583,9 @@ struct qe_firmware_info *qe_get_firmware_info(void)
initialized = 1;
- /*
- * Newer device trees have an "fsl,qe" compatible property for the QE
- * node, but we still need to support older device trees.
- */
- qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
- if (!qe) {
- qe = of_find_node_by_type(NULL, "qe");
- if (!qe)
- return NULL;
- }
+ qe = qe_get_device_node();
+ if (!qe)
+ return NULL;
/* Find the 'firmware' child node */
fw = of_get_child_by_name(qe, "firmware");
@@ -627,16 +631,9 @@ unsigned int qe_get_num_of_risc(void)
unsigned int num_of_risc = 0;
const u32 *prop;
- qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
- if (!qe) {
- /* Older devices trees did not have an "fsl,qe"
- * compatible property, so we need to look for
- * the QE node by name.
- */
- qe = of_find_node_by_type(NULL, "qe");
- if (!qe)
- return num_of_risc;
- }
+ qe = qe_get_device_node();
+ if (!qe)
+ return num_of_risc;
prop = of_get_property(qe, "fsl,qe-num-riscs", &size);
if (prop && size == sizeof(*prop))
@@ -650,37 +647,7 @@ EXPORT_SYMBOL(qe_get_num_of_risc);
unsigned int qe_get_num_of_snums(void)
{
- struct device_node *qe;
- int size;
- unsigned int num_of_snums;
- const u32 *prop;
-
- num_of_snums = 28; /* The default number of snum for threads is 28 */
- qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
- if (!qe) {
- /* Older devices trees did not have an "fsl,qe"
- * compatible property, so we need to look for
- * the QE node by name.
- */
- qe = of_find_node_by_type(NULL, "qe");
- if (!qe)
- return num_of_snums;
- }
-
- prop = of_get_property(qe, "fsl,qe-num-snums", &size);
- if (prop && size == sizeof(*prop)) {
- num_of_snums = *prop;
- if ((num_of_snums < 28) || (num_of_snums > QE_NUM_OF_SNUM)) {
- /* No QE ever has fewer than 28 SNUMs */
- pr_err("QE: number of snum is invalid\n");
- of_node_put(qe);
- return -EINVAL;
- }
- }
-
- of_node_put(qe);
-
- return num_of_snums;
+ return qe_num_of_snum;
}
EXPORT_SYMBOL(qe_get_num_of_snums);
diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
index 31b8d002d855..b0dffb06c05d 100644
--- a/drivers/soc/imx/gpcv2.c
+++ b/drivers/soc/imx/gpcv2.c
@@ -198,7 +198,7 @@ static int imx_gpc_pu_pgc_sw_pxx_req(struct generic_pm_domain *genpd,
err = regulator_disable(domain->regulator);
if (err)
dev_err(domain->dev,
- "failed to disable regulator: %d\n", ret);
+ "failed to disable regulator: %d\n", err);
/* Preserve earlier error code */
ret = ret ?: err;
}
diff --git a/drivers/soc/imx/soc-imx-scu.c b/drivers/soc/imx/soc-imx-scu.c
index 676f612f6488..50831ebf126a 100644
--- a/drivers/soc/imx/soc-imx-scu.c
+++ b/drivers/soc/imx/soc-imx-scu.c
@@ -27,6 +27,40 @@ struct imx_sc_msg_misc_get_soc_id {
} data;
} __packed;
+struct imx_sc_msg_misc_get_soc_uid {
+ struct imx_sc_rpc_msg hdr;
+ u32 uid_low;
+ u32 uid_high;
+} __packed;
+
+static ssize_t soc_uid_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct imx_sc_msg_misc_get_soc_uid msg;
+ struct imx_sc_rpc_msg *hdr = &msg.hdr;
+ u64 soc_uid;
+ int ret;
+
+ hdr->ver = IMX_SC_RPC_VERSION;
+ hdr->svc = IMX_SC_RPC_SVC_MISC;
+ hdr->func = IMX_SC_MISC_FUNC_UNIQUE_ID;
+ hdr->size = 1;
+
+ ret = imx_scu_call_rpc(soc_ipc_handle, &msg, false);
+ if (ret) {
+ pr_err("%s: get soc uid failed, ret %d\n", __func__, ret);
+ return ret;
+ }
+
+ soc_uid = msg.uid_high;
+ soc_uid <<= 32;
+ soc_uid |= msg.uid_low;
+
+ return sprintf(buf, "%016llX\n", soc_uid);
+}
+
+static DEVICE_ATTR_RO(soc_uid);
+
static int imx_scu_soc_id(void)
{
struct imx_sc_msg_misc_get_soc_id msg;
@@ -102,6 +136,11 @@ static int imx_scu_soc_probe(struct platform_device *pdev)
goto free_revision;
}
+ ret = device_create_file(soc_device_to_device(soc_dev),
+ &dev_attr_soc_uid);
+ if (ret)
+ goto free_revision;
+
return 0;
free_revision:
diff --git a/drivers/soc/imx/soc-imx8.c b/drivers/soc/imx/soc-imx8.c
index f924ae8c6514..b9831576dd25 100644
--- a/drivers/soc/imx/soc-imx8.c
+++ b/drivers/soc/imx/soc-imx8.c
@@ -16,6 +16,9 @@
#define IMX8MQ_SW_INFO_B1 0x40
#define IMX8MQ_SW_MAGIC_B1 0xff0055aa
+#define OCOTP_UID_LOW 0x410
+#define OCOTP_UID_HIGH 0x420
+
/* Same as ANADIG_DIGPROG_IMX7D */
#define ANADIG_DIGPROG_IMX8MM 0x800
@@ -24,6 +27,16 @@ struct imx8_soc_data {
u32 (*soc_revision)(void);
};
+static u64 soc_uid;
+
+static ssize_t soc_uid_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%016llX\n", soc_uid);
+}
+
+static DEVICE_ATTR_RO(soc_uid);
+
static u32 __init imx8mq_soc_revision(void)
{
struct device_node *np;
@@ -42,6 +55,10 @@ static u32 __init imx8mq_soc_revision(void)
if (magic == IMX8MQ_SW_MAGIC_B1)
rev = REV_B1;
+ soc_uid = readl_relaxed(ocotp_base + OCOTP_UID_HIGH);
+ soc_uid <<= 32;
+ soc_uid |= readl_relaxed(ocotp_base + OCOTP_UID_LOW);
+
iounmap(ocotp_base);
out:
@@ -49,6 +66,26 @@ out:
return rev;
}
+static void __init imx8mm_soc_uid(void)
+{
+ void __iomem *ocotp_base;
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx8mm-ocotp");
+ if (!np)
+ return;
+
+ ocotp_base = of_iomap(np, 0);
+ WARN_ON(!ocotp_base);
+
+ soc_uid = readl_relaxed(ocotp_base + OCOTP_UID_HIGH);
+ soc_uid <<= 32;
+ soc_uid |= readl_relaxed(ocotp_base + OCOTP_UID_LOW);
+
+ iounmap(ocotp_base);
+ of_node_put(np);
+}
+
static u32 __init imx8mm_soc_revision(void)
{
struct device_node *np;
@@ -66,6 +103,9 @@ static u32 __init imx8mm_soc_revision(void)
iounmap(anatop_base);
of_node_put(np);
+
+ imx8mm_soc_uid();
+
return rev;
}
@@ -140,6 +180,11 @@ static int __init imx8_soc_init(void)
goto free_rev;
}
+ ret = device_create_file(soc_device_to_device(soc_dev),
+ &dev_attr_soc_uid);
+ if (ret)
+ goto free_rev;
+
if (IS_ENABLED(CONFIG_ARM_IMX_CPUFREQ_DT))
platform_device_register_simple("imx-cpufreq-dt", -1, NULL, 0);
diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index ff9fef5a032b..7aa0517ff2f3 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -136,7 +136,7 @@ static int cmdq_pkt_append_command(struct cmdq_pkt *pkt, enum cmdq_code code,
return 0;
}
-int cmdq_pkt_write(struct cmdq_pkt *pkt, u32 value, u32 subsys, u32 offset)
+int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value)
{
u32 arg_a = (offset & CMDQ_ARG_A_WRITE_MASK) |
(subsys << CMDQ_SUBSYS_SHIFT);
@@ -145,8 +145,8 @@ int cmdq_pkt_write(struct cmdq_pkt *pkt, u32 value, u32 subsys, u32 offset)
}
EXPORT_SYMBOL(cmdq_pkt_write);
-int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
- u32 subsys, u32 offset, u32 mask)
+int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
+ u16 offset, u32 value, u32 mask)
{
u32 offset_mask = offset;
int err = 0;
@@ -161,7 +161,7 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
}
EXPORT_SYMBOL(cmdq_pkt_write_mask);
-int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u32 event)
+int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
{
u32 arg_b;
@@ -181,7 +181,7 @@ int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u32 event)
}
EXPORT_SYMBOL(cmdq_pkt_wfe);
-int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u32 event)
+int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u16 event)
{
if (event >= CMDQ_MAX_EVENT)
return -EINVAL;
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index a6d1bfb17279..661e47acc354 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -175,6 +175,14 @@ config QCOM_SMSM
Say yes here to support the Qualcomm Shared Memory State Machine.
The state machine is represented by bits in shared memory.
+config QCOM_SOCINFO
+ tristate "Qualcomm socinfo driver"
+ depends on QCOM_SMEM
+ select SOC_BUS
+ help
+ Say yes here to support the Qualcomm socinfo driver, providing
+ information about the SoC to user space.
+
config QCOM_WCNSS_CTRL
tristate "Qualcomm WCNSS control driver"
depends on ARCH_QCOM || COMPILE_TEST
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index eeb088beb15f..162788701a77 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_QCOM_SMEM) += smem.o
obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
obj-$(CONFIG_QCOM_SMP2P) += smp2p.o
obj-$(CONFIG_QCOM_SMSM) += smsm.o
+obj-$(CONFIG_QCOM_SOCINFO) += socinfo.o
obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
obj-$(CONFIG_QCOM_APR) += apr.o
obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o
diff --git a/drivers/soc/qcom/qcom_aoss.c b/drivers/soc/qcom/qcom_aoss.c
index 5f885196f4d0..33a27e6c6d67 100644
--- a/drivers/soc/qcom/qcom_aoss.c
+++ b/drivers/soc/qcom/qcom_aoss.c
@@ -10,6 +10,8 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
+#include <linux/thermal.h>
+#include <linux/slab.h>
#define QMP_DESC_MAGIC 0x0
#define QMP_DESC_VERSION 0x4
@@ -40,6 +42,17 @@
/* 64 bytes is enough to store the requests and provides padding to 4 bytes */
#define QMP_MSG_LEN 64
+#define QMP_NUM_COOLING_RESOURCES 2
+
+static bool qmp_cdev_init_state = 1;
+
+struct qmp_cooling_device {
+ struct thermal_cooling_device *cdev;
+ struct qmp *qmp;
+ char *name;
+ bool state;
+};
+
/**
* struct qmp - driver state for QMP implementation
* @msgram: iomem referencing the message RAM used for communication
@@ -69,6 +82,7 @@ struct qmp {
struct clk_hw qdss_clk;
struct genpd_onecell_data pd_data;
+ struct qmp_cooling_device *cooling_devs;
};
struct qmp_pd {
@@ -385,6 +399,118 @@ static void qmp_pd_remove(struct qmp *qmp)
pm_genpd_remove(data->domains[i]);
}
+static int qmp_cdev_get_max_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ *state = qmp_cdev_init_state;
+ return 0;
+}
+
+static int qmp_cdev_get_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ struct qmp_cooling_device *qmp_cdev = cdev->devdata;
+
+ *state = qmp_cdev->state;
+ return 0;
+}
+
+static int qmp_cdev_set_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long state)
+{
+ struct qmp_cooling_device *qmp_cdev = cdev->devdata;
+ char buf[QMP_MSG_LEN] = {};
+ bool cdev_state;
+ int ret;
+
+ /* Normalize state */
+ cdev_state = !!state;
+
+ if (qmp_cdev->state == state)
+ return 0;
+
+ snprintf(buf, sizeof(buf),
+ "{class: volt_flr, event:zero_temp, res:%s, value:%s}",
+ qmp_cdev->name,
+ cdev_state ? "off" : "on");
+
+ ret = qmp_send(qmp_cdev->qmp, buf, sizeof(buf));
+
+ if (!ret)
+ qmp_cdev->state = cdev_state;
+
+ return ret;
+}
+
+static struct thermal_cooling_device_ops qmp_cooling_device_ops = {
+ .get_max_state = qmp_cdev_get_max_state,
+ .get_cur_state = qmp_cdev_get_cur_state,
+ .set_cur_state = qmp_cdev_set_cur_state,
+};
+
+static int qmp_cooling_device_add(struct qmp *qmp,
+ struct qmp_cooling_device *qmp_cdev,
+ struct device_node *node)
+{
+ char *cdev_name = (char *)node->name;
+
+ qmp_cdev->qmp = qmp;
+ qmp_cdev->state = qmp_cdev_init_state;
+ qmp_cdev->name = cdev_name;
+ qmp_cdev->cdev = devm_thermal_of_cooling_device_register
+ (qmp->dev, node,
+ cdev_name,
+ qmp_cdev, &qmp_cooling_device_ops);
+
+ if (IS_ERR(qmp_cdev->cdev))
+ dev_err(qmp->dev, "unable to register %s cooling device\n",
+ cdev_name);
+
+ return PTR_ERR_OR_ZERO(qmp_cdev->cdev);
+}
+
+static int qmp_cooling_devices_register(struct qmp *qmp)
+{
+ struct device_node *np, *child;
+ int count = QMP_NUM_COOLING_RESOURCES;
+ int ret;
+
+ np = qmp->dev->of_node;
+
+ qmp->cooling_devs = devm_kcalloc(qmp->dev, count,
+ sizeof(*qmp->cooling_devs),
+ GFP_KERNEL);
+
+ if (!qmp->cooling_devs)
+ return -ENOMEM;
+
+ for_each_available_child_of_node(np, child) {
+ if (!of_find_property(child, "#cooling-cells", NULL))
+ continue;
+ ret = qmp_cooling_device_add(qmp, &qmp->cooling_devs[count++],
+ child);
+ if (ret)
+ goto unroll;
+ }
+
+ return 0;
+
+unroll:
+ while (--count >= 0)
+ thermal_cooling_device_unregister
+ (qmp->cooling_devs[count].cdev);
+
+ return ret;
+}
+
+static void qmp_cooling_devices_remove(struct qmp *qmp)
+{
+ int i;
+
+ for (i = 0; i < QMP_NUM_COOLING_RESOURCES; i++)
+ thermal_cooling_device_unregister(qmp->cooling_devs[i].cdev);
+}
+
static int qmp_probe(struct platform_device *pdev)
{
struct resource *res;
@@ -433,6 +559,10 @@ static int qmp_probe(struct platform_device *pdev)
if (ret)
goto err_remove_qdss_clk;
+ ret = qmp_cooling_devices_register(qmp);
+ if (ret)
+ dev_err(&pdev->dev, "failed to register aoss cooling devices\n");
+
platform_set_drvdata(pdev, qmp);
return 0;
@@ -453,6 +583,7 @@ static int qmp_remove(struct platform_device *pdev)
qmp_qdss_clk_remove(qmp);
qmp_pd_remove(qmp);
+ qmp_cooling_devices_remove(qmp);
qmp_close(qmp);
mbox_free_channel(qmp->mbox_chan);
@@ -461,7 +592,9 @@ static int qmp_remove(struct platform_device *pdev)
}
static const struct of_device_id qmp_dt_match[] = {
+ { .compatible = "qcom,sc7180-aoss-qmp", },
{ .compatible = "qcom,sdm845-aoss-qmp", },
+ { .compatible = "qcom,sm8150-aoss-qmp", },
{}
};
MODULE_DEVICE_TABLE(of, qmp_dt_match);
diff --git a/drivers/soc/qcom/smem.c b/drivers/soc/qcom/smem.c
index f27c00d82ae4..28c19bcb2f20 100644
--- a/drivers/soc/qcom/smem.c
+++ b/drivers/soc/qcom/smem.c
@@ -84,7 +84,7 @@
#define SMEM_GLOBAL_HOST 0xfffe
/* Max number of processors/hosts in a system */
-#define SMEM_HOST_COUNT 10
+#define SMEM_HOST_COUNT 11
/**
* struct smem_proc_comm - proc_comm communication struct (legacy)
@@ -268,6 +268,7 @@ struct qcom_smem {
struct smem_partition_header *partitions[SMEM_HOST_COUNT];
size_t cacheline[SMEM_HOST_COUNT];
u32 item_count;
+ struct platform_device *socinfo;
unsigned num_regions;
struct smem_region regions[];
@@ -963,11 +964,19 @@ static int qcom_smem_probe(struct platform_device *pdev)
__smem = smem;
+ smem->socinfo = platform_device_register_data(&pdev->dev, "qcom-socinfo",
+ PLATFORM_DEVID_NONE, NULL,
+ 0);
+ if (IS_ERR(smem->socinfo))
+ dev_dbg(&pdev->dev, "failed to register socinfo device\n");
+
return 0;
}
static int qcom_smem_remove(struct platform_device *pdev)
{
+ platform_device_unregister(__smem->socinfo);
+
hwspin_lock_free(__smem->hwlock);
__smem = NULL;
diff --git a/drivers/soc/qcom/socinfo.c b/drivers/soc/qcom/socinfo.c
new file mode 100644
index 000000000000..a39ea5061dc5
--- /dev/null
+++ b/drivers/soc/qcom/socinfo.c
@@ -0,0 +1,476 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2009-2017, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2017-2019, Linaro Ltd.
+ */
+
+#include <linux/debugfs.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/random.h>
+#include <linux/slab.h>
+#include <linux/soc/qcom/smem.h>
+#include <linux/string.h>
+#include <linux/sys_soc.h>
+#include <linux/types.h>
+
+/*
+ * SoC version type with major number in the upper 16 bits and minor
+ * number in the lower 16 bits.
+ */
+#define SOCINFO_MAJOR(ver) (((ver) >> 16) & 0xffff)
+#define SOCINFO_MINOR(ver) ((ver) & 0xffff)
+#define SOCINFO_VERSION(maj, min) ((((maj) & 0xffff) << 16)|((min) & 0xffff))
+
+#define SMEM_SOCINFO_BUILD_ID_LENGTH 32
+
+/*
+ * SMEM item id, used to acquire handles to respective
+ * SMEM region.
+ */
+#define SMEM_HW_SW_BUILD_ID 137
+
+#ifdef CONFIG_DEBUG_FS
+#define SMEM_IMAGE_VERSION_BLOCKS_COUNT 32
+#define SMEM_IMAGE_VERSION_SIZE 4096
+#define SMEM_IMAGE_VERSION_NAME_SIZE 75
+#define SMEM_IMAGE_VERSION_VARIANT_SIZE 20
+#define SMEM_IMAGE_VERSION_OEM_SIZE 32
+
+/*
+ * SMEM Image table indices
+ */
+#define SMEM_IMAGE_TABLE_BOOT_INDEX 0
+#define SMEM_IMAGE_TABLE_TZ_INDEX 1
+#define SMEM_IMAGE_TABLE_RPM_INDEX 3
+#define SMEM_IMAGE_TABLE_APPS_INDEX 10
+#define SMEM_IMAGE_TABLE_MPSS_INDEX 11
+#define SMEM_IMAGE_TABLE_ADSP_INDEX 12
+#define SMEM_IMAGE_TABLE_CNSS_INDEX 13
+#define SMEM_IMAGE_TABLE_VIDEO_INDEX 14
+#define SMEM_IMAGE_VERSION_TABLE 469
+
+/*
+ * SMEM Image table names
+ */
+static const char *const socinfo_image_names[] = {
+ [SMEM_IMAGE_TABLE_ADSP_INDEX] = "adsp",
+ [SMEM_IMAGE_TABLE_APPS_INDEX] = "apps",
+ [SMEM_IMAGE_TABLE_BOOT_INDEX] = "boot",
+ [SMEM_IMAGE_TABLE_CNSS_INDEX] = "cnss",
+ [SMEM_IMAGE_TABLE_MPSS_INDEX] = "mpss",
+ [SMEM_IMAGE_TABLE_RPM_INDEX] = "rpm",
+ [SMEM_IMAGE_TABLE_TZ_INDEX] = "tz",
+ [SMEM_IMAGE_TABLE_VIDEO_INDEX] = "video",
+};
+
+static const char *const pmic_models[] = {
+ [0] = "Unknown PMIC model",
+ [9] = "PM8994",
+ [11] = "PM8916",
+ [13] = "PM8058",
+ [14] = "PM8028",
+ [15] = "PM8901",
+ [16] = "PM8027",
+ [17] = "ISL9519",
+ [18] = "PM8921",
+ [19] = "PM8018",
+ [20] = "PM8015",
+ [21] = "PM8014",
+ [22] = "PM8821",
+ [23] = "PM8038",
+ [24] = "PM8922",
+ [25] = "PM8917",
+};
+#endif /* CONFIG_DEBUG_FS */
+
+/* Socinfo SMEM item structure */
+struct socinfo {
+ __le32 fmt;
+ __le32 id;
+ __le32 ver;
+ char build_id[SMEM_SOCINFO_BUILD_ID_LENGTH];
+ /* Version 2 */
+ __le32 raw_id;
+ __le32 raw_ver;
+ /* Version 3 */
+ __le32 hw_plat;
+ /* Version 4 */
+ __le32 plat_ver;
+ /* Version 5 */
+ __le32 accessory_chip;
+ /* Version 6 */
+ __le32 hw_plat_subtype;
+ /* Version 7 */
+ __le32 pmic_model;
+ __le32 pmic_die_rev;
+ /* Version 8 */
+ __le32 pmic_model_1;
+ __le32 pmic_die_rev_1;
+ __le32 pmic_model_2;
+ __le32 pmic_die_rev_2;
+ /* Version 9 */
+ __le32 foundry_id;
+ /* Version 10 */
+ __le32 serial_num;
+ /* Version 11 */
+ __le32 num_pmics;
+ __le32 pmic_array_offset;
+ /* Version 12 */
+ __le32 chip_family;
+ __le32 raw_device_family;
+ __le32 raw_device_num;
+};
+
+#ifdef CONFIG_DEBUG_FS
+struct socinfo_params {
+ u32 raw_device_family;
+ u32 hw_plat_subtype;
+ u32 accessory_chip;
+ u32 raw_device_num;
+ u32 chip_family;
+ u32 foundry_id;
+ u32 plat_ver;
+ u32 raw_ver;
+ u32 hw_plat;
+ u32 fmt;
+};
+
+struct smem_image_version {
+ char name[SMEM_IMAGE_VERSION_NAME_SIZE];
+ char variant[SMEM_IMAGE_VERSION_VARIANT_SIZE];
+ char pad;
+ char oem[SMEM_IMAGE_VERSION_OEM_SIZE];
+};
+#endif /* CONFIG_DEBUG_FS */
+
+struct qcom_socinfo {
+ struct soc_device *soc_dev;
+ struct soc_device_attribute attr;
+#ifdef CONFIG_DEBUG_FS
+ struct dentry *dbg_root;
+ struct socinfo_params info;
+#endif /* CONFIG_DEBUG_FS */
+};
+
+struct soc_id {
+ unsigned int id;
+ const char *name;
+};
+
+static const struct soc_id soc_id[] = {
+ { 87, "MSM8960" },
+ { 109, "APQ8064" },
+ { 122, "MSM8660A" },
+ { 123, "MSM8260A" },
+ { 124, "APQ8060A" },
+ { 126, "MSM8974" },
+ { 130, "MPQ8064" },
+ { 138, "MSM8960AB" },
+ { 139, "APQ8060AB" },
+ { 140, "MSM8260AB" },
+ { 141, "MSM8660AB" },
+ { 178, "APQ8084" },
+ { 184, "APQ8074" },
+ { 185, "MSM8274" },
+ { 186, "MSM8674" },
+ { 194, "MSM8974PRO" },
+ { 206, "MSM8916" },
+ { 208, "APQ8074-AA" },
+ { 209, "APQ8074-AB" },
+ { 210, "APQ8074PRO" },
+ { 211, "MSM8274-AA" },
+ { 212, "MSM8274-AB" },
+ { 213, "MSM8274PRO" },
+ { 214, "MSM8674-AA" },
+ { 215, "MSM8674-AB" },
+ { 216, "MSM8674PRO" },
+ { 217, "MSM8974-AA" },
+ { 218, "MSM8974-AB" },
+ { 246, "MSM8996" },
+ { 247, "APQ8016" },
+ { 248, "MSM8216" },
+ { 249, "MSM8116" },
+ { 250, "MSM8616" },
+ { 291, "APQ8096" },
+ { 305, "MSM8996SG" },
+ { 310, "MSM8996AU" },
+ { 311, "APQ8096AU" },
+ { 312, "APQ8096SG" },
+};
+
+static const char *socinfo_machine(struct device *dev, unsigned int id)
+{
+ int idx;
+
+ for (idx = 0; idx < ARRAY_SIZE(soc_id); idx++) {
+ if (soc_id[idx].id == id)
+ return soc_id[idx].name;
+ }
+
+ return NULL;
+}
+
+#ifdef CONFIG_DEBUG_FS
+
+#define QCOM_OPEN(name, _func) \
+static int qcom_open_##name(struct inode *inode, struct file *file) \
+{ \
+ return single_open(file, _func, inode->i_private); \
+} \
+ \
+static const struct file_operations qcom_ ##name## _ops = { \
+ .open = qcom_open_##name, \
+ .read = seq_read, \
+ .llseek = seq_lseek, \
+ .release = single_release, \
+}
+
+#define DEBUGFS_ADD(info, name) \
+ debugfs_create_file(__stringify(name), 0400, \
+ qcom_socinfo->dbg_root, \
+ info, &qcom_ ##name## _ops)
+
+
+static int qcom_show_build_id(struct seq_file *seq, void *p)
+{
+ struct socinfo *socinfo = seq->private;
+
+ seq_printf(seq, "%s\n", socinfo->build_id);
+
+ return 0;
+}
+
+static int qcom_show_pmic_model(struct seq_file *seq, void *p)
+{
+ struct socinfo *socinfo = seq->private;
+ int model = SOCINFO_MINOR(le32_to_cpu(socinfo->pmic_model));
+
+ if (model < 0)
+ return -EINVAL;
+
+ seq_printf(seq, "%s\n", pmic_models[model]);
+
+ return 0;
+}
+
+static int qcom_show_pmic_die_revision(struct seq_file *seq, void *p)
+{
+ struct socinfo *socinfo = seq->private;
+
+ seq_printf(seq, "%u.%u\n",
+ SOCINFO_MAJOR(le32_to_cpu(socinfo->pmic_die_rev)),
+ SOCINFO_MINOR(le32_to_cpu(socinfo->pmic_die_rev)));
+
+ return 0;
+}
+
+QCOM_OPEN(build_id, qcom_show_build_id);
+QCOM_OPEN(pmic_model, qcom_show_pmic_model);
+QCOM_OPEN(pmic_die_rev, qcom_show_pmic_die_revision);
+
+#define DEFINE_IMAGE_OPS(type) \
+static int show_image_##type(struct seq_file *seq, void *p) \
+{ \
+ struct smem_image_version *image_version = seq->private; \
+ seq_puts(seq, image_version->type); \
+ seq_puts(seq, "\n"); \
+ return 0; \
+} \
+static int open_image_##type(struct inode *inode, struct file *file) \
+{ \
+ return single_open(file, show_image_##type, inode->i_private); \
+} \
+ \
+static const struct file_operations qcom_image_##type##_ops = { \
+ .open = open_image_##type, \
+ .read = seq_read, \
+ .llseek = seq_lseek, \
+ .release = single_release, \
+}
+
+DEFINE_IMAGE_OPS(name);
+DEFINE_IMAGE_OPS(variant);
+DEFINE_IMAGE_OPS(oem);
+
+static void socinfo_debugfs_init(struct qcom_socinfo *qcom_socinfo,
+ struct socinfo *info)
+{
+ struct smem_image_version *versions;
+ struct dentry *dentry;
+ size_t size;
+ int i;
+
+ qcom_socinfo->dbg_root = debugfs_create_dir("qcom_socinfo", NULL);
+
+ qcom_socinfo->info.fmt = __le32_to_cpu(info->fmt);
+
+ switch (qcom_socinfo->info.fmt) {
+ case SOCINFO_VERSION(0, 12):
+ qcom_socinfo->info.chip_family =
+ __le32_to_cpu(info->chip_family);
+ qcom_socinfo->info.raw_device_family =
+ __le32_to_cpu(info->raw_device_family);
+ qcom_socinfo->info.raw_device_num =
+ __le32_to_cpu(info->raw_device_num);
+
+ debugfs_create_x32("chip_family", 0400, qcom_socinfo->dbg_root,
+ &qcom_socinfo->info.chip_family);
+ debugfs_create_x32("raw_device_family", 0400,
+ qcom_socinfo->dbg_root,
+ &qcom_socinfo->info.raw_device_family);
+ debugfs_create_x32("raw_device_number", 0400,
+ qcom_socinfo->dbg_root,
+ &qcom_socinfo->info.raw_device_num);
+ /* Fall through */
+ case SOCINFO_VERSION(0, 11):
+ case SOCINFO_VERSION(0, 10):
+ case SOCINFO_VERSION(0, 9):
+ qcom_socinfo->info.foundry_id = __le32_to_cpu(info->foundry_id);
+
+ debugfs_create_u32("foundry_id", 0400, qcom_socinfo->dbg_root,
+ &qcom_socinfo->info.foundry_id);
+ /* Fall through */
+ case SOCINFO_VERSION(0, 8):
+ case SOCINFO_VERSION(0, 7):
+ DEBUGFS_ADD(info, pmic_model);
+ DEBUGFS_ADD(info, pmic_die_rev);
+ /* Fall through */
+ case SOCINFO_VERSION(0, 6):
+ qcom_socinfo->info.hw_plat_subtype =
+ __le32_to_cpu(info->hw_plat_subtype);
+
+ debugfs_create_u32("hardware_platform_subtype", 0400,
+ qcom_socinfo->dbg_root,
+ &qcom_socinfo->info.hw_plat_subtype);
+ /* Fall through */
+ case SOCINFO_VERSION(0, 5):
+ qcom_socinfo->info.accessory_chip =
+ __le32_to_cpu(info->accessory_chip);
+
+ debugfs_create_u32("accessory_chip", 0400,
+ qcom_socinfo->dbg_root,
+ &qcom_socinfo->info.accessory_chip);
+ /* Fall through */
+ case SOCINFO_VERSION(0, 4):
+ qcom_socinfo->info.plat_ver = __le32_to_cpu(info->plat_ver);
+
+ debugfs_create_u32("platform_version", 0400,
+ qcom_socinfo->dbg_root,
+ &qcom_socinfo->info.plat_ver);
+ /* Fall through */
+ case SOCINFO_VERSION(0, 3):
+ qcom_socinfo->info.hw_plat = __le32_to_cpu(info->hw_plat);
+
+ debugfs_create_u32("hardware_platform", 0400,
+ qcom_socinfo->dbg_root,
+ &qcom_socinfo->info.hw_plat);
+ /* Fall through */
+ case SOCINFO_VERSION(0, 2):
+ qcom_socinfo->info.raw_ver = __le32_to_cpu(info->raw_ver);
+
+ debugfs_create_u32("raw_version", 0400, qcom_socinfo->dbg_root,
+ &qcom_socinfo->info.raw_ver);
+ /* Fall through */
+ case SOCINFO_VERSION(0, 1):
+ DEBUGFS_ADD(info, build_id);
+ break;
+ }
+
+ versions = qcom_smem_get(QCOM_SMEM_HOST_ANY, SMEM_IMAGE_VERSION_TABLE,
+ &size);
+
+ for (i = 0; i < ARRAY_SIZE(socinfo_image_names); i++) {
+ if (!socinfo_image_names[i])
+ continue;
+
+ dentry = debugfs_create_dir(socinfo_image_names[i],
+ qcom_socinfo->dbg_root);
+ debugfs_create_file("name", 0400, dentry, &versions[i],
+ &qcom_image_name_ops);
+ debugfs_create_file("variant", 0400, dentry, &versions[i],
+ &qcom_image_variant_ops);
+ debugfs_create_file("oem", 0400, dentry, &versions[i],
+ &qcom_image_oem_ops);
+ }
+}
+
+static void socinfo_debugfs_exit(struct qcom_socinfo *qcom_socinfo)
+{
+ debugfs_remove_recursive(qcom_socinfo->dbg_root);
+}
+#else
+static void socinfo_debugfs_init(struct qcom_socinfo *qcom_socinfo,
+ struct socinfo *info)
+{
+}
+static void socinfo_debugfs_exit(struct qcom_socinfo *qcom_socinfo) { }
+#endif /* CONFIG_DEBUG_FS */
+
+static int qcom_socinfo_probe(struct platform_device *pdev)
+{
+ struct qcom_socinfo *qs;
+ struct socinfo *info;
+ size_t item_size;
+
+ info = qcom_smem_get(QCOM_SMEM_HOST_ANY, SMEM_HW_SW_BUILD_ID,
+ &item_size);
+ if (IS_ERR(info)) {
+ dev_err(&pdev->dev, "Couldn't find socinfo\n");
+ return PTR_ERR(info);
+ }
+
+ qs = devm_kzalloc(&pdev->dev, sizeof(*qs), GFP_KERNEL);
+ if (!qs)
+ return -ENOMEM;
+
+ qs->attr.family = "Snapdragon";
+ qs->attr.machine = socinfo_machine(&pdev->dev,
+ le32_to_cpu(info->id));
+ qs->attr.revision = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%u.%u",
+ SOCINFO_MAJOR(le32_to_cpu(info->ver)),
+ SOCINFO_MINOR(le32_to_cpu(info->ver)));
+ if (offsetof(struct socinfo, serial_num) <= item_size)
+ qs->attr.serial_number = devm_kasprintf(&pdev->dev, GFP_KERNEL,
+ "%u",
+ le32_to_cpu(info->serial_num));
+
+ qs->soc_dev = soc_device_register(&qs->attr);
+ if (IS_ERR(qs->soc_dev))
+ return PTR_ERR(qs->soc_dev);
+
+ socinfo_debugfs_init(qs, info);
+
+ /* Feed the soc specific unique data into entropy pool */
+ add_device_randomness(info, item_size);
+
+ platform_set_drvdata(pdev, qs->soc_dev);
+
+ return 0;
+}
+
+static int qcom_socinfo_remove(struct platform_device *pdev)
+{
+ struct qcom_socinfo *qs = platform_get_drvdata(pdev);
+
+ soc_device_unregister(qs->soc_dev);
+
+ socinfo_debugfs_exit(qs);
+
+ return 0;
+}
+
+static struct platform_driver qcom_socinfo_driver = {
+ .probe = qcom_socinfo_probe,
+ .remove = qcom_socinfo_remove,
+ .driver = {
+ .name = "qcom-socinfo",
+ },
+};
+
+module_platform_driver(qcom_socinfo_driver);
+
+MODULE_DESCRIPTION("Qualcomm SoCinfo driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:qcom-socinfo");
diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index 2bbf49e5d441..3c5e017bacba 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -55,6 +55,7 @@ config ARCH_EMEV2
config ARCH_R7S72100
bool "RZ/A1H (R7S72100)"
+ select ARM_ERRATA_754322
select PM
select PM_GENERIC_DOMAINS
select RENESAS_OSTM
@@ -72,12 +73,14 @@ config ARCH_R8A73A4
bool "R-Mobile APE6 (R8A73A40)"
select ARCH_RMOBILE
select ARM_ERRATA_798181 if SMP
+ select ARM_ERRATA_814220
select HAVE_ARM_ARCH_TIMER
select RENESAS_IRQC
config ARCH_R8A7740
bool "R-Mobile A1 (R8A77400)"
select ARCH_RMOBILE
+ select ARM_ERRATA_754322
select RENESAS_INTC_IRQPIN
config ARCH_R8A7743
@@ -95,20 +98,24 @@ config ARCH_R8A7744
config ARCH_R8A7745
bool "RZ/G1E (R8A77450)"
select ARCH_RCAR_GEN2
+ select ARM_ERRATA_814220
select SYSC_R8A7745
config ARCH_R8A77470
bool "RZ/G1C (R8A77470)"
select ARCH_RCAR_GEN2
+ select ARM_ERRATA_814220
select SYSC_R8A77470
config ARCH_R8A7778
bool "R-Car M1A (R8A77781)"
select ARCH_RCAR_GEN1
+ select ARM_ERRATA_754322
config ARCH_R8A7779
bool "R-Car H1 (R8A77790)"
select ARCH_RCAR_GEN1
+ select ARM_ERRATA_754322
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select SYSC_R8A7779
@@ -117,6 +124,7 @@ config ARCH_R8A7790
bool "R-Car H2 (R8A77900)"
select ARCH_RCAR_GEN2
select ARM_ERRATA_798181 if SMP
+ select ARM_ERRATA_814220
select I2C
select SYSC_R8A7790
@@ -143,15 +151,18 @@ config ARCH_R8A7793
config ARCH_R8A7794
bool "R-Car E2 (R8A77940)"
select ARCH_RCAR_GEN2
+ select ARM_ERRATA_814220
select SYSC_R8A7794
config ARCH_R9A06G032
bool "RZ/N1D (R9A06G032)"
select ARCH_RZN1
+ select ARM_ERRATA_814220
config ARCH_SH73A0
bool "SH-Mobile AG5 (R8A73A00)"
select ARCH_RMOBILE
+ select ARM_ERRATA_754322
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select RENESAS_INTC_IRQPIN
diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c
index 0c80fab4f8de..59b5e6b10272 100644
--- a/drivers/soc/renesas/rcar-sysc.c
+++ b/drivers/soc/renesas/rcar-sysc.c
@@ -170,7 +170,7 @@ struct rcar_sysc_pd {
struct generic_pm_domain genpd;
struct rcar_sysc_ch ch;
unsigned int flags;
- char name[0];
+ char name[];
};
static inline struct rcar_sysc_pd *to_rcar_pd(struct generic_pm_domain *d)
@@ -200,7 +200,6 @@ static int __init rcar_sysc_pd_setup(struct rcar_sysc_pd *pd)
{
struct generic_pm_domain *genpd = &pd->genpd;
const char *name = pd->genpd.name;
- struct dev_power_governor *gov = &simple_qos_governor;
int error;
if (pd->flags & PD_CPU) {
@@ -254,7 +253,7 @@ static int __init rcar_sysc_pd_setup(struct rcar_sysc_pd *pd)
rcar_sysc_power(&pd->ch, true);
finalize:
- error = pm_genpd_init(genpd, gov, false);
+ error = pm_genpd_init(genpd, &simple_qos_governor, false);
if (error)
pr_err("Failed to init PM domain %s: %d\n", name, error);
@@ -346,7 +345,7 @@ static int __init rcar_sysc_pd_init(void)
if (info->init) {
error = info->init();
if (error)
- return error;
+ goto out_put;
}
has_cpg_mstp = of_find_compatible_node(NULL, NULL,
diff --git a/drivers/soc/renesas/rmobile-sysc.c b/drivers/soc/renesas/rmobile-sysc.c
index 421ae1c887d8..54b616ad4a62 100644
--- a/drivers/soc/renesas/rmobile-sysc.c
+++ b/drivers/soc/renesas/rmobile-sysc.c
@@ -48,12 +48,8 @@ struct rmobile_pm_domain *to_rmobile_pd(struct generic_pm_domain *d)
static int rmobile_pd_power_down(struct generic_pm_domain *genpd)
{
struct rmobile_pm_domain *rmobile_pd = to_rmobile_pd(genpd);
- unsigned int mask;
+ unsigned int mask = BIT(rmobile_pd->bit_shift);
- if (rmobile_pd->bit_shift == ~0)
- return -EBUSY;
-
- mask = BIT(rmobile_pd->bit_shift);
if (rmobile_pd->suspend) {
int ret = rmobile_pd->suspend();
@@ -80,14 +76,10 @@ static int rmobile_pd_power_down(struct generic_pm_domain *genpd)
static int __rmobile_pd_power_up(struct rmobile_pm_domain *rmobile_pd)
{
- unsigned int mask;
+ unsigned int mask = BIT(rmobile_pd->bit_shift);
unsigned int retry_count;
int ret = 0;
- if (rmobile_pd->bit_shift == ~0)
- return 0;
-
- mask = BIT(rmobile_pd->bit_shift);
if (__raw_readl(rmobile_pd->base + PSTR) & mask)
return ret;
@@ -122,11 +114,15 @@ static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd)
struct dev_power_governor *gov = rmobile_pd->gov;
genpd->flags |= GENPD_FLAG_PM_CLK | GENPD_FLAG_ACTIVE_WAKEUP;
- genpd->power_off = rmobile_pd_power_down;
- genpd->power_on = rmobile_pd_power_up;
- genpd->attach_dev = cpg_mstp_attach_dev;
- genpd->detach_dev = cpg_mstp_detach_dev;
- __rmobile_pd_power_up(rmobile_pd);
+ genpd->attach_dev = cpg_mstp_attach_dev;
+ genpd->detach_dev = cpg_mstp_detach_dev;
+
+ if (!(genpd->flags & GENPD_FLAG_ALWAYS_ON)) {
+ genpd->power_off = rmobile_pd_power_down;
+ genpd->power_on = rmobile_pd_power_up;
+ __rmobile_pd_power_up(rmobile_pd);
+ }
+
pm_genpd_init(genpd, gov ? : &simple_qos_governor, false);
}
@@ -270,6 +266,11 @@ static void __init rmobile_setup_pm_domain(struct device_node *np,
break;
case PD_NORMAL:
+ if (pd->bit_shift == ~0) {
+ /* Top-level always-on domain */
+ pr_debug("PM domain %s is always-on domain\n", name);
+ pd->genpd.flags |= GENPD_FLAG_ALWAYS_ON;
+ }
break;
}
diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig
index 2186285fda92..33ad0de2de3c 100644
--- a/drivers/soc/samsung/Kconfig
+++ b/drivers/soc/samsung/Kconfig
@@ -7,6 +7,12 @@ menuconfig SOC_SAMSUNG
if SOC_SAMSUNG
+config EXYNOS_CHIPID
+ bool "Exynos Chipid controller driver" if COMPILE_TEST
+ depends on ARCH_EXYNOS || COMPILE_TEST
+ select MFD_SYSCON
+ select SOC_BUS
+
config EXYNOS_PMU
bool "Exynos PMU controller driver" if COMPILE_TEST
depends on ARCH_EXYNOS || ((ARM || ARM64) && COMPILE_TEST)
diff --git a/drivers/soc/samsung/Makefile b/drivers/soc/samsung/Makefile
index 29f294baac6e..3b6a8797416c 100644
--- a/drivers/soc/samsung/Makefile
+++ b/drivers/soc/samsung/Makefile
@@ -1,4 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_EXYNOS_CHIPID) += exynos-chipid.o
obj-$(CONFIG_EXYNOS_PMU) += exynos-pmu.o
obj-$(CONFIG_EXYNOS_PMU_ARM_DRIVERS) += exynos3250-pmu.o exynos4-pmu.o \
diff --git a/drivers/soc/samsung/exynos-chipid.c b/drivers/soc/samsung/exynos-chipid.c
new file mode 100644
index 000000000000..c55a47cfe617
--- /dev/null
+++ b/drivers/soc/samsung/exynos-chipid.c
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * EXYNOS - CHIP ID support
+ * Author: Pankaj Dubey <pankaj.dubey@samsung.com>
+ * Author: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
+ */
+
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/soc/samsung/exynos-chipid.h>
+#include <linux/sys_soc.h>
+
+static const struct exynos_soc_id {
+ const char *name;
+ unsigned int id;
+} soc_ids[] = {
+ { "EXYNOS3250", 0xE3472000 },
+ { "EXYNOS4210", 0x43200000 }, /* EVT0 revision */
+ { "EXYNOS4210", 0x43210000 },
+ { "EXYNOS4212", 0x43220000 },
+ { "EXYNOS4412", 0xE4412000 },
+ { "EXYNOS5250", 0x43520000 },
+ { "EXYNOS5260", 0xE5260000 },
+ { "EXYNOS5410", 0xE5410000 },
+ { "EXYNOS5420", 0xE5420000 },
+ { "EXYNOS5440", 0xE5440000 },
+ { "EXYNOS5800", 0xE5422000 },
+ { "EXYNOS7420", 0xE7420000 },
+ { "EXYNOS5433", 0xE5433000 },
+};
+
+static const char * __init product_id_to_soc_id(unsigned int product_id)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(soc_ids); i++)
+ if ((product_id & EXYNOS_MASK) == soc_ids[i].id)
+ return soc_ids[i].name;
+ return NULL;
+}
+
+int __init exynos_chipid_early_init(void)
+{
+ struct soc_device_attribute *soc_dev_attr;
+ struct soc_device *soc_dev;
+ struct device_node *root;
+ struct regmap *regmap;
+ u32 product_id;
+ u32 revision;
+ int ret;
+
+ regmap = syscon_regmap_lookup_by_compatible("samsung,exynos4210-chipid");
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ ret = regmap_read(regmap, EXYNOS_CHIPID_REG_PRO_ID, &product_id);
+ if (ret < 0)
+ return ret;
+
+ revision = product_id & EXYNOS_REV_MASK;
+
+ soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+ if (!soc_dev_attr)
+ return -ENOMEM;
+
+ soc_dev_attr->family = "Samsung Exynos";
+
+ root = of_find_node_by_path("/");
+ of_property_read_string(root, "model", &soc_dev_attr->machine);
+ of_node_put(root);
+
+ soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%x", revision);
+ soc_dev_attr->soc_id = product_id_to_soc_id(product_id);
+ if (!soc_dev_attr->soc_id) {
+ pr_err("Unknown SoC\n");
+ ret = -ENODEV;
+ goto err;
+ }
+
+ /* please note that the actual registration will be deferred */
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev)) {
+ ret = PTR_ERR(soc_dev);
+ goto err;
+ }
+
+ /* it is too early to use dev_info() here (soc_dev is NULL) */
+ pr_info("soc soc0: Exynos: CPU[%s] PRO_ID[0x%x] REV[0x%x] Detected\n",
+ soc_dev_attr->soc_id, product_id, revision);
+
+ return 0;
+
+err:
+ kfree(soc_dev_attr->revision);
+ kfree(soc_dev_attr);
+ return ret;
+}
+
+early_initcall(exynos_chipid_early_init);
diff --git a/drivers/soc/ti/ti_sci_pm_domains.c b/drivers/soc/ti/ti_sci_pm_domains.c
index 97817dd7ba24..8c2a2f23982c 100644
--- a/drivers/soc/ti/ti_sci_pm_domains.c
+++ b/drivers/soc/ti/ti_sci_pm_domains.c
@@ -15,15 +15,19 @@
#include <linux/pm_domain.h>
#include <linux/slab.h>
#include <linux/soc/ti/ti_sci_protocol.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
/**
* struct ti_sci_genpd_dev_data: holds data needed for every device attached
* to this genpd
* @idx: index of the device that identifies it with the system
* control processor.
+ * @exclusive: Permissions for exclusive request or shared request of the
+ * device.
*/
struct ti_sci_genpd_dev_data {
int idx;
+ u8 exclusive;
};
/**
@@ -55,6 +59,14 @@ static int ti_sci_dev_id(struct device *dev)
return sci_dev_data->idx;
}
+static u8 is_ti_sci_dev_exclusive(struct device *dev)
+{
+ struct generic_pm_domain_data *genpd_data = dev_gpd_data(dev);
+ struct ti_sci_genpd_dev_data *sci_dev_data = genpd_data->data;
+
+ return sci_dev_data->exclusive;
+}
+
/**
* ti_sci_dev_to_sci_handle(): get pointer to ti_sci_handle
* @dev: pointer to device associated with this genpd
@@ -79,7 +91,10 @@ static int ti_sci_dev_start(struct device *dev)
const struct ti_sci_handle *ti_sci = ti_sci_dev_to_sci_handle(dev);
int idx = ti_sci_dev_id(dev);
- return ti_sci->ops.dev_ops.get_device(ti_sci, idx);
+ if (is_ti_sci_dev_exclusive(dev))
+ return ti_sci->ops.dev_ops.get_device_exclusive(ti_sci, idx);
+ else
+ return ti_sci->ops.dev_ops.get_device(ti_sci, idx);
}
/**
@@ -110,7 +125,7 @@ static int ti_sci_pd_attach_dev(struct generic_pm_domain *domain,
if (ret < 0)
return ret;
- if (pd_args.args_count != 1)
+ if (pd_args.args_count != 1 && pd_args.args_count != 2)
return -EINVAL;
idx = pd_args.args[0];
@@ -128,6 +143,10 @@ static int ti_sci_pd_attach_dev(struct generic_pm_domain *domain,
return -ENOMEM;
sci_dev_data->idx = idx;
+ /* Enable the exclusive permissions by default */
+ sci_dev_data->exclusive = TI_SCI_PD_EXCLUSIVE;
+ if (pd_args.args_count == 2)
+ sci_dev_data->exclusive = pd_args.args[1] & 0x1;
genpd_data = dev_gpd_data(dev);
genpd_data->data = sci_dev_data;
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 6ee514fd0920..0f0fdb57198f 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -450,13 +450,6 @@ config SPI_NPCM_PSPI
This driver provides support for Nuvoton NPCM BMC
Peripheral SPI controller in master mode.
-config SPI_NUC900
- tristate "Nuvoton NUC900 series SPI"
- depends on ARCH_W90X900
- select SPI_BITBANG
- help
- SPI driver for Nuvoton NUC900 series ARM SoCs
-
config SPI_LANTIQ_SSC
tristate "Lantiq SSC SPI controller"
depends on LANTIQ || COMPILE_TEST
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index adbebee93a75..bb49c9e6d0a0 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -65,7 +65,6 @@ obj-$(CONFIG_SPI_MXIC) += spi-mxic.o
obj-$(CONFIG_SPI_MXS) += spi-mxs.o
obj-$(CONFIG_SPI_NPCM_FIU) += spi-npcm-fiu.o
obj-$(CONFIG_SPI_NPCM_PSPI) += spi-npcm-pspi.o
-obj-$(CONFIG_SPI_NUC900) += spi-nuc900.o
obj-$(CONFIG_SPI_NXP_FLEXSPI) += spi-nxp-fspi.o
obj-$(CONFIG_SPI_OC_TINY) += spi-oc-tiny.o
spi-octeon-objs := spi-cavium.o spi-cavium-octeon.o
diff --git a/drivers/spi/spi-nuc900.c b/drivers/spi/spi-nuc900.c
deleted file mode 100644
index 61400358f4be..000000000000
--- a/drivers/spi/spi-nuc900.c
+++ /dev/null
@@ -1,426 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2009 Nuvoton technology.
- * Wan ZongShun <mcuos.com@gmail.com>
- */
-
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_bitbang.h>
-
-#include <linux/platform_data/spi-nuc900.h>
-
-/* usi registers offset */
-#define USI_CNT 0x00
-#define USI_DIV 0x04
-#define USI_SSR 0x08
-#define USI_RX0 0x10
-#define USI_TX0 0x10
-
-/* usi register bit */
-#define ENINT (0x01 << 17)
-#define ENFLG (0x01 << 16)
-#define SLEEP (0x0f << 12)
-#define TXNUM (0x03 << 8)
-#define TXBITLEN (0x1f << 3)
-#define TXNEG (0x01 << 2)
-#define RXNEG (0x01 << 1)
-#define LSB (0x01 << 10)
-#define SELECTLEV (0x01 << 2)
-#define SELECTPOL (0x01 << 31)
-#define SELECTSLAVE 0x01
-#define GOBUSY 0x01
-
-struct nuc900_spi {
- struct spi_bitbang bitbang;
- struct completion done;
- void __iomem *regs;
- int irq;
- int len;
- int count;
- const unsigned char *tx;
- unsigned char *rx;
- struct clk *clk;
- struct spi_master *master;
- struct nuc900_spi_info *pdata;
- spinlock_t lock;
-};
-
-static inline struct nuc900_spi *to_hw(struct spi_device *sdev)
-{
- return spi_master_get_devdata(sdev->master);
-}
-
-static void nuc900_slave_select(struct spi_device *spi, unsigned int ssr)
-{
- struct nuc900_spi *hw = to_hw(spi);
- unsigned int val;
- unsigned int cs = spi->mode & SPI_CS_HIGH ? 1 : 0;
- unsigned int cpol = spi->mode & SPI_CPOL ? 1 : 0;
- unsigned long flags;
-
- spin_lock_irqsave(&hw->lock, flags);
-
- val = __raw_readl(hw->regs + USI_SSR);
-
- if (!cs)
- val &= ~SELECTLEV;
- else
- val |= SELECTLEV;
-
- if (!ssr)
- val &= ~SELECTSLAVE;
- else
- val |= SELECTSLAVE;
-
- __raw_writel(val, hw->regs + USI_SSR);
-
- val = __raw_readl(hw->regs + USI_CNT);
-
- if (!cpol)
- val &= ~SELECTPOL;
- else
- val |= SELECTPOL;
-
- __raw_writel(val, hw->regs + USI_CNT);
-
- spin_unlock_irqrestore(&hw->lock, flags);
-}
-
-static void nuc900_spi_chipsel(struct spi_device *spi, int value)
-{
- switch (value) {
- case BITBANG_CS_INACTIVE:
- nuc900_slave_select(spi, 0);
- break;
-
- case BITBANG_CS_ACTIVE:
- nuc900_slave_select(spi, 1);
- break;
- }
-}
-
-static void nuc900_spi_setup_txnum(struct nuc900_spi *hw, unsigned int txnum)
-{
- unsigned int val;
- unsigned long flags;
-
- spin_lock_irqsave(&hw->lock, flags);
-
- val = __raw_readl(hw->regs + USI_CNT) & ~TXNUM;
-
- if (txnum)
- val |= txnum << 0x08;
-
- __raw_writel(val, hw->regs + USI_CNT);
-
- spin_unlock_irqrestore(&hw->lock, flags);
-
-}
-
-static void nuc900_spi_setup_txbitlen(struct nuc900_spi *hw,
- unsigned int txbitlen)
-{
- unsigned int val;
- unsigned long flags;
-
- spin_lock_irqsave(&hw->lock, flags);
-
- val = __raw_readl(hw->regs + USI_CNT) & ~TXBITLEN;
-
- val |= (txbitlen << 0x03);
-
- __raw_writel(val, hw->regs + USI_CNT);
-
- spin_unlock_irqrestore(&hw->lock, flags);
-}
-
-static void nuc900_spi_gobusy(struct nuc900_spi *hw)
-{
- unsigned int val;
- unsigned long flags;
-
- spin_lock_irqsave(&hw->lock, flags);
-
- val = __raw_readl(hw->regs + USI_CNT);
-
- val |= GOBUSY;
-
- __raw_writel(val, hw->regs + USI_CNT);
-
- spin_unlock_irqrestore(&hw->lock, flags);
-}
-
-static inline unsigned int hw_txbyte(struct nuc900_spi *hw, int count)
-{
- return hw->tx ? hw->tx[count] : 0;
-}
-
-static int nuc900_spi_txrx(struct spi_device *spi, struct spi_transfer *t)
-{
- struct nuc900_spi *hw = to_hw(spi);
-
- hw->tx = t->tx_buf;
- hw->rx = t->rx_buf;
- hw->len = t->len;
- hw->count = 0;
-
- __raw_writel(hw_txbyte(hw, 0x0), hw->regs + USI_TX0);
-
- nuc900_spi_gobusy(hw);
-
- wait_for_completion(&hw->done);
-
- return hw->count;
-}
-
-static irqreturn_t nuc900_spi_irq(int irq, void *dev)
-{
- struct nuc900_spi *hw = dev;
- unsigned int status;
- unsigned int count = hw->count;
-
- status = __raw_readl(hw->regs + USI_CNT);
- __raw_writel(status, hw->regs + USI_CNT);
-
- if (status & ENFLG) {
- hw->count++;
-
- if (hw->rx)
- hw->rx[count] = __raw_readl(hw->regs + USI_RX0);
- count++;
-
- if (count < hw->len) {
- __raw_writel(hw_txbyte(hw, count), hw->regs + USI_TX0);
- nuc900_spi_gobusy(hw);
- } else {
- complete(&hw->done);
- }
-
- return IRQ_HANDLED;
- }
-
- complete(&hw->done);
- return IRQ_HANDLED;
-}
-
-static void nuc900_tx_edge(struct nuc900_spi *hw, unsigned int edge)
-{
- unsigned int val;
- unsigned long flags;
-
- spin_lock_irqsave(&hw->lock, flags);
-
- val = __raw_readl(hw->regs + USI_CNT);
-
- if (edge)
- val |= TXNEG;
- else
- val &= ~TXNEG;
- __raw_writel(val, hw->regs + USI_CNT);
-
- spin_unlock_irqrestore(&hw->lock, flags);
-}
-
-static void nuc900_rx_edge(struct nuc900_spi *hw, unsigned int edge)
-{
- unsigned int val;
- unsigned long flags;
-
- spin_lock_irqsave(&hw->lock, flags);
-
- val = __raw_readl(hw->regs + USI_CNT);
-
- if (edge)
- val |= RXNEG;
- else
- val &= ~RXNEG;
- __raw_writel(val, hw->regs + USI_CNT);
-
- spin_unlock_irqrestore(&hw->lock, flags);
-}
-
-static void nuc900_send_first(struct nuc900_spi *hw, unsigned int lsb)
-{
- unsigned int val;
- unsigned long flags;
-
- spin_lock_irqsave(&hw->lock, flags);
-
- val = __raw_readl(hw->regs + USI_CNT);
-
- if (lsb)
- val |= LSB;
- else
- val &= ~LSB;
- __raw_writel(val, hw->regs + USI_CNT);
-
- spin_unlock_irqrestore(&hw->lock, flags);
-}
-
-static void nuc900_set_sleep(struct nuc900_spi *hw, unsigned int sleep)
-{
- unsigned int val;
- unsigned long flags;
-
- spin_lock_irqsave(&hw->lock, flags);
-
- val = __raw_readl(hw->regs + USI_CNT) & ~SLEEP;
-
- if (sleep)
- val |= (sleep << 12);
-
- __raw_writel(val, hw->regs + USI_CNT);
-
- spin_unlock_irqrestore(&hw->lock, flags);
-}
-
-static void nuc900_enable_int(struct nuc900_spi *hw)
-{
- unsigned int val;
- unsigned long flags;
-
- spin_lock_irqsave(&hw->lock, flags);
-
- val = __raw_readl(hw->regs + USI_CNT);
-
- val |= ENINT;
-
- __raw_writel(val, hw->regs + USI_CNT);
-
- spin_unlock_irqrestore(&hw->lock, flags);
-}
-
-static void nuc900_set_divider(struct nuc900_spi *hw)
-{
- __raw_writel(hw->pdata->divider, hw->regs + USI_DIV);
-}
-
-static void nuc900_init_spi(struct nuc900_spi *hw)
-{
- clk_enable(hw->clk);
- spin_lock_init(&hw->lock);
-
- nuc900_tx_edge(hw, hw->pdata->txneg);
- nuc900_rx_edge(hw, hw->pdata->rxneg);
- nuc900_send_first(hw, hw->pdata->lsb);
- nuc900_set_sleep(hw, hw->pdata->sleep);
- nuc900_spi_setup_txbitlen(hw, hw->pdata->txbitlen);
- nuc900_spi_setup_txnum(hw, hw->pdata->txnum);
- nuc900_set_divider(hw);
- nuc900_enable_int(hw);
-}
-
-static int nuc900_spi_probe(struct platform_device *pdev)
-{
- struct nuc900_spi *hw;
- struct spi_master *master;
- int err = 0;
-
- master = spi_alloc_master(&pdev->dev, sizeof(struct nuc900_spi));
- if (master == NULL) {
- dev_err(&pdev->dev, "No memory for spi_master\n");
- return -ENOMEM;
- }
-
- hw = spi_master_get_devdata(master);
- hw->master = master;
- hw->pdata = dev_get_platdata(&pdev->dev);
-
- if (hw->pdata == NULL) {
- dev_err(&pdev->dev, "No platform data supplied\n");
- err = -ENOENT;
- goto err_pdata;
- }
-
- platform_set_drvdata(pdev, hw);
- init_completion(&hw->done);
-
- master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
- if (hw->pdata->lsb)
- master->mode_bits |= SPI_LSB_FIRST;
- master->num_chipselect = hw->pdata->num_cs;
- master->bus_num = hw->pdata->bus_num;
- hw->bitbang.master = hw->master;
- hw->bitbang.chipselect = nuc900_spi_chipsel;
- hw->bitbang.txrx_bufs = nuc900_spi_txrx;
-
- hw->regs = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(hw->regs)) {
- err = PTR_ERR(hw->regs);
- goto err_pdata;
- }
-
- hw->irq = platform_get_irq(pdev, 0);
- if (hw->irq < 0) {
- err = -ENOENT;
- goto err_pdata;
- }
-
- err = devm_request_irq(&pdev->dev, hw->irq, nuc900_spi_irq, 0,
- pdev->name, hw);
- if (err) {
- dev_err(&pdev->dev, "Cannot claim IRQ\n");
- goto err_pdata;
- }
-
- hw->clk = devm_clk_get(&pdev->dev, "spi");
- if (IS_ERR(hw->clk)) {
- dev_err(&pdev->dev, "No clock for device\n");
- err = PTR_ERR(hw->clk);
- goto err_pdata;
- }
-
- mfp_set_groupg(&pdev->dev, NULL);
- nuc900_init_spi(hw);
-
- err = spi_bitbang_start(&hw->bitbang);
- if (err) {
- dev_err(&pdev->dev, "Failed to register SPI master\n");
- goto err_register;
- }
-
- return 0;
-
-err_register:
- clk_disable(hw->clk);
-err_pdata:
- spi_master_put(hw->master);
- return err;
-}
-
-static int nuc900_spi_remove(struct platform_device *dev)
-{
- struct nuc900_spi *hw = platform_get_drvdata(dev);
-
- spi_bitbang_stop(&hw->bitbang);
- clk_disable(hw->clk);
- spi_master_put(hw->master);
- return 0;
-}
-
-static struct platform_driver nuc900_spi_driver = {
- .probe = nuc900_spi_probe,
- .remove = nuc900_spi_remove,
- .driver = {
- .name = "nuc900-spi",
- },
-};
-module_platform_driver(nuc900_spi_driver);
-
-MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
-MODULE_DESCRIPTION("nuc900 spi driver!");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:nuc900-spi");
diff --git a/drivers/tee/optee/call.c b/drivers/tee/optee/call.c
index aa942703ae65..13b0269a0abc 100644
--- a/drivers/tee/optee/call.c
+++ b/drivers/tee/optee/call.c
@@ -148,6 +148,7 @@ u32 optee_do_call_with_arg(struct tee_context *ctx, phys_addr_t parg)
*/
optee_cq_wait_for_completion(&optee->call_queue, &w);
} else if (OPTEE_SMC_RETURN_IS_RPC(res.a0)) {
+ might_sleep();
param.a0 = res.a0;
param.a1 = res.a1;
param.a2 = res.a2;
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 6b2de93bd302..5f83cd715387 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -1924,20 +1924,6 @@ config FB_S3C2410_DEBUG
Turn on debugging messages. Note that you can set/unset at run time
through sysfs
-config FB_NUC900
- tristate "NUC900 LCD framebuffer support"
- depends on FB && ARCH_W90X900
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- ---help---
- Frame buffer driver for the built-in LCD controller in the Nuvoton
- NUC900 processor
-
-config GPM1040A0_320X240
- bool "Giantplus Technology GPM1040A0 320x240 Color TFT LCD"
- depends on FB_NUC900
-
config FB_SM501
tristate "Silicon Motion SM501 framebuffer support"
depends on FB && MFD_SM501
diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile
index 7dc4861a93e6..aab7155884ea 100644
--- a/drivers/video/fbdev/Makefile
+++ b/drivers/video/fbdev/Makefile
@@ -116,7 +116,6 @@ obj-y += omap2/
obj-$(CONFIG_XEN_FBDEV_FRONTEND) += xen-fbfront.o
obj-$(CONFIG_FB_CARMINE) += carminefb.o
obj-$(CONFIG_FB_MB862XX) += mb862xx/
-obj-$(CONFIG_FB_NUC900) += nuc900fb.o
obj-$(CONFIG_FB_JZ4740) += jz4740_fb.o
obj-$(CONFIG_FB_PUV3_UNIGFX) += fb-puv3.o
obj-$(CONFIG_FB_HYPERV) += hyperv_fb.o
diff --git a/drivers/video/fbdev/da8xx-fb.c b/drivers/video/fbdev/da8xx-fb.c
index b1cf248f3291..2d3dcc52fcf3 100644
--- a/drivers/video/fbdev/da8xx-fb.c
+++ b/drivers/video/fbdev/da8xx-fb.c
@@ -19,6 +19,7 @@
#include <linux/clk.h>
#include <linux/cpufreq.h>
#include <linux/console.h>
+#include <linux/regulator/consumer.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/delay.h>
@@ -164,7 +165,7 @@ struct da8xx_fb_par {
struct notifier_block freq_transition;
#endif
unsigned int lcdc_clk_rate;
- void (*panel_power_ctrl)(int);
+ struct regulator *lcd_supply;
u32 pseudo_palette[16];
struct fb_videomode mode;
struct lcd_ctrl_config cfg;
@@ -1066,33 +1067,30 @@ static void lcd_da8xx_cpufreq_deregister(struct da8xx_fb_par *par)
static int fb_remove(struct platform_device *dev)
{
struct fb_info *info = dev_get_drvdata(&dev->dev);
-
- if (info) {
- struct da8xx_fb_par *par = info->par;
+ struct da8xx_fb_par *par = info->par;
+ int ret;
#ifdef CONFIG_CPU_FREQ
- lcd_da8xx_cpufreq_deregister(par);
+ lcd_da8xx_cpufreq_deregister(par);
#endif
- if (par->panel_power_ctrl)
- par->panel_power_ctrl(0);
+ if (par->lcd_supply) {
+ ret = regulator_disable(par->lcd_supply);
+ if (ret)
+ return ret;
+ }
- lcd_disable_raster(DA8XX_FRAME_WAIT);
- lcdc_write(0, LCD_RASTER_CTRL_REG);
+ lcd_disable_raster(DA8XX_FRAME_WAIT);
+ lcdc_write(0, LCD_RASTER_CTRL_REG);
- /* disable DMA */
- lcdc_write(0, LCD_DMA_CTRL_REG);
+ /* disable DMA */
+ lcdc_write(0, LCD_DMA_CTRL_REG);
- unregister_framebuffer(info);
- fb_dealloc_cmap(&info->cmap);
- dma_free_coherent(par->dev, PALETTE_SIZE, par->v_palette_base,
- par->p_palette_base);
- dma_free_coherent(par->dev, par->vram_size, par->vram_virt,
- par->vram_phys);
- pm_runtime_put_sync(&dev->dev);
- pm_runtime_disable(&dev->dev);
- framebuffer_release(info);
+ unregister_framebuffer(info);
+ fb_dealloc_cmap(&info->cmap);
+ pm_runtime_put_sync(&dev->dev);
+ pm_runtime_disable(&dev->dev);
+ framebuffer_release(info);
- }
return 0;
}
@@ -1179,15 +1177,21 @@ static int cfb_blank(int blank, struct fb_info *info)
case FB_BLANK_UNBLANK:
lcd_enable_raster();
- if (par->panel_power_ctrl)
- par->panel_power_ctrl(1);
+ if (par->lcd_supply) {
+ ret = regulator_enable(par->lcd_supply);
+ if (ret)
+ return ret;
+ }
break;
case FB_BLANK_NORMAL:
case FB_BLANK_VSYNC_SUSPEND:
case FB_BLANK_HSYNC_SUSPEND:
case FB_BLANK_POWERDOWN:
- if (par->panel_power_ctrl)
- par->panel_power_ctrl(0);
+ if (par->lcd_supply) {
+ ret = regulator_disable(par->lcd_supply);
+ if (ret)
+ return ret;
+ }
lcd_disable_raster(DA8XX_FRAME_WAIT);
break;
@@ -1328,7 +1332,6 @@ static int fb_probe(struct platform_device *device)
{
struct da8xx_lcdc_platform_data *fb_pdata =
dev_get_platdata(&device->dev);
- struct resource *lcdc_regs;
struct lcd_ctrl_config *lcd_cfg;
struct fb_videomode *lcdc_info;
struct fb_info *da8xx_fb_info;
@@ -1346,8 +1349,7 @@ static int fb_probe(struct platform_device *device)
if (lcdc_info == NULL)
return -ENODEV;
- lcdc_regs = platform_get_resource(device, IORESOURCE_MEM, 0);
- da8xx_fb_reg_base = devm_ioremap_resource(&device->dev, lcdc_regs);
+ da8xx_fb_reg_base = devm_platform_ioremap_resource(device, 0);
if (IS_ERR(da8xx_fb_reg_base))
return PTR_ERR(da8xx_fb_reg_base);
@@ -1395,9 +1397,19 @@ static int fb_probe(struct platform_device *device)
par->dev = &device->dev;
par->lcdc_clk = tmp_lcdc_clk;
par->lcdc_clk_rate = clk_get_rate(par->lcdc_clk);
- if (fb_pdata->panel_power_ctrl) {
- par->panel_power_ctrl = fb_pdata->panel_power_ctrl;
- par->panel_power_ctrl(1);
+
+ par->lcd_supply = devm_regulator_get_optional(&device->dev, "lcd");
+ if (IS_ERR(par->lcd_supply)) {
+ if (PTR_ERR(par->lcd_supply) == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto err_pm_runtime_disable;
+ }
+
+ par->lcd_supply = NULL;
+ } else {
+ ret = regulator_enable(par->lcd_supply);
+ if (ret)
+ goto err_pm_runtime_disable;
}
fb_videomode_to_var(&da8xx_fb_var, lcdc_info);
@@ -1411,10 +1423,10 @@ static int fb_probe(struct platform_device *device)
par->vram_size = roundup(par->vram_size/8, ulcm);
par->vram_size = par->vram_size * LCD_NUM_BUFFERS;
- par->vram_virt = dma_alloc_coherent(par->dev,
- par->vram_size,
- &par->vram_phys,
- GFP_KERNEL | GFP_DMA);
+ par->vram_virt = dmam_alloc_coherent(par->dev,
+ par->vram_size,
+ &par->vram_phys,
+ GFP_KERNEL | GFP_DMA);
if (!par->vram_virt) {
dev_err(&device->dev,
"GLCD: kmalloc for frame buffer failed\n");
@@ -1432,20 +1444,20 @@ static int fb_probe(struct platform_device *device)
da8xx_fb_fix.line_length - 1;
/* allocate palette buffer */
- par->v_palette_base = dma_alloc_coherent(par->dev, PALETTE_SIZE,
- &par->p_palette_base,
- GFP_KERNEL | GFP_DMA);
+ par->v_palette_base = dmam_alloc_coherent(par->dev, PALETTE_SIZE,
+ &par->p_palette_base,
+ GFP_KERNEL | GFP_DMA);
if (!par->v_palette_base) {
dev_err(&device->dev,
"GLCD: kmalloc for palette buffer failed\n");
ret = -EINVAL;
- goto err_release_fb_mem;
+ goto err_release_fb;
}
par->irq = platform_get_irq(device, 0);
if (par->irq < 0) {
ret = -ENOENT;
- goto err_release_pl_mem;
+ goto err_release_fb;
}
da8xx_fb_var.grayscale =
@@ -1463,7 +1475,7 @@ static int fb_probe(struct platform_device *device)
ret = fb_alloc_cmap(&da8xx_fb_info->cmap, PALETTE_SIZE, 0);
if (ret)
- goto err_release_pl_mem;
+ goto err_release_fb;
da8xx_fb_info->cmap.len = par->palette_sz;
/* initialize var_screeninfo */
@@ -1517,14 +1529,6 @@ err_cpu_freq:
err_dealloc_cmap:
fb_dealloc_cmap(&da8xx_fb_info->cmap);
-err_release_pl_mem:
- dma_free_coherent(par->dev, PALETTE_SIZE, par->v_palette_base,
- par->p_palette_base);
-
-err_release_fb_mem:
- dma_free_coherent(par->dev, par->vram_size, par->vram_virt,
- par->vram_phys);
-
err_release_fb:
framebuffer_release(da8xx_fb_info);
@@ -1603,10 +1607,14 @@ static int fb_suspend(struct device *dev)
{
struct fb_info *info = dev_get_drvdata(dev);
struct da8xx_fb_par *par = info->par;
+ int ret;
console_lock();
- if (par->panel_power_ctrl)
- par->panel_power_ctrl(0);
+ if (par->lcd_supply) {
+ ret = regulator_disable(par->lcd_supply);
+ if (ret)
+ return ret;
+ }
fb_set_suspend(info, 1);
lcd_disable_raster(DA8XX_FRAME_WAIT);
@@ -1620,6 +1628,7 @@ static int fb_resume(struct device *dev)
{
struct fb_info *info = dev_get_drvdata(dev);
struct da8xx_fb_par *par = info->par;
+ int ret;
console_lock();
pm_runtime_get_sync(dev);
@@ -1627,8 +1636,11 @@ static int fb_resume(struct device *dev)
if (par->blank == FB_BLANK_UNBLANK) {
lcd_enable_raster();
- if (par->panel_power_ctrl)
- par->panel_power_ctrl(1);
+ if (par->lcd_supply) {
+ ret = regulator_enable(par->lcd_supply);
+ if (ret)
+ return ret;
+ }
}
fb_set_suspend(info, 0);
diff --git a/drivers/video/fbdev/nuc900fb.c b/drivers/video/fbdev/nuc900fb.c
deleted file mode 100644
index 4fd851598584..000000000000
--- a/drivers/video/fbdev/nuc900fb.c
+++ /dev/null
@@ -1,760 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- *
- * Copyright (c) 2009 Nuvoton technology corporation
- * All rights reserved.
- *
- * Description:
- * Nuvoton LCD Controller Driver
- * Author:
- * Wang Qiang (rurality.linux@gmail.com) 2009/12/11
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/tty.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/dma-mapping.h>
-#include <linux/interrupt.h>
-#include <linux/workqueue.h>
-#include <linux/wait.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/cpufreq.h>
-#include <linux/io.h>
-#include <linux/pm.h>
-#include <linux/device.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-ldm.h>
-#include <linux/platform_data/video-nuc900fb.h>
-
-#include "nuc900fb.h"
-
-
-/*
- * Initialize the nuc900 video (dual) buffer address
- */
-static void nuc900fb_set_lcdaddr(struct fb_info *info)
-{
- struct nuc900fb_info *fbi = info->par;
- void __iomem *regs = fbi->io;
- unsigned long vbaddr1, vbaddr2;
-
- vbaddr1 = info->fix.smem_start;
- vbaddr2 = info->fix.smem_start;
- vbaddr2 += info->fix.line_length * info->var.yres;
-
- /* set frambuffer start phy addr*/
- writel(vbaddr1, regs + REG_LCM_VA_BADDR0);
- writel(vbaddr2, regs + REG_LCM_VA_BADDR1);
-
- writel(fbi->regs.lcd_va_fbctrl, regs + REG_LCM_VA_FBCTRL);
- writel(fbi->regs.lcd_va_scale, regs + REG_LCM_VA_SCALE);
-}
-
-/*
- * calculate divider for lcd div
- */
-static unsigned int nuc900fb_calc_pixclk(struct nuc900fb_info *fbi,
- unsigned long pixclk)
-{
- unsigned long clk = fbi->clk_rate;
- unsigned long long div;
-
- /* pixclk is in picseconds. our clock is in Hz*/
- /* div = (clk * pixclk)/10^12 */
- div = (unsigned long long)clk * pixclk;
- div >>= 12;
- do_div(div, 625 * 625UL * 625);
-
- dev_dbg(fbi->dev, "pixclk %ld, divisor is %lld\n", pixclk, div);
-
- return div;
-}
-
-/*
- * Check the video params of 'var'.
- */
-static int nuc900fb_check_var(struct fb_var_screeninfo *var,
- struct fb_info *info)
-{
- struct nuc900fb_info *fbi = info->par;
- struct nuc900fb_mach_info *mach_info = dev_get_platdata(fbi->dev);
- struct nuc900fb_display *display = NULL;
- struct nuc900fb_display *default_display = mach_info->displays +
- mach_info->default_display;
- int i;
-
- dev_dbg(fbi->dev, "check_var(var=%p, info=%p)\n", var, info);
-
- /* validate x/y resolution */
- /* choose default mode if possible */
- if (var->xres == default_display->xres &&
- var->yres == default_display->yres &&
- var->bits_per_pixel == default_display->bpp)
- display = default_display;
- else
- for (i = 0; i < mach_info->num_displays; i++)
- if (var->xres == mach_info->displays[i].xres &&
- var->yres == mach_info->displays[i].yres &&
- var->bits_per_pixel == mach_info->displays[i].bpp) {
- display = mach_info->displays + i;
- break;
- }
-
- if (display == NULL) {
- printk(KERN_ERR "wrong resolution or depth %dx%d at %d bit per pixel\n",
- var->xres, var->yres, var->bits_per_pixel);
- return -EINVAL;
- }
-
- /* it should be the same size as the display */
- var->xres_virtual = display->xres;
- var->yres_virtual = display->yres;
- var->height = display->height;
- var->width = display->width;
-
- /* copy lcd settings */
- var->pixclock = display->pixclock;
- var->left_margin = display->left_margin;
- var->right_margin = display->right_margin;
- var->upper_margin = display->upper_margin;
- var->lower_margin = display->lower_margin;
- var->vsync_len = display->vsync_len;
- var->hsync_len = display->hsync_len;
-
- var->transp.offset = 0;
- var->transp.length = 0;
-
- fbi->regs.lcd_dccs = display->dccs;
- fbi->regs.lcd_device_ctrl = display->devctl;
- fbi->regs.lcd_va_fbctrl = display->fbctrl;
- fbi->regs.lcd_va_scale = display->scale;
-
- /* set R/G/B possions */
- switch (var->bits_per_pixel) {
- case 1:
- case 2:
- case 4:
- case 8:
- default:
- var->red.offset = 0;
- var->red.length = var->bits_per_pixel;
- var->green = var->red;
- var->blue = var->red;
- break;
- case 12:
- var->red.length = 4;
- var->green.length = 4;
- var->blue.length = 4;
- var->red.offset = 8;
- var->green.offset = 4;
- var->blue.offset = 0;
- break;
- case 16:
- var->red.length = 5;
- var->green.length = 6;
- var->blue.length = 5;
- var->red.offset = 11;
- var->green.offset = 5;
- var->blue.offset = 0;
- break;
- case 18:
- var->red.length = 6;
- var->green.length = 6;
- var->blue.length = 6;
- var->red.offset = 12;
- var->green.offset = 6;
- var->blue.offset = 0;
- break;
- case 32:
- var->red.length = 8;
- var->green.length = 8;
- var->blue.length = 8;
- var->red.offset = 16;
- var->green.offset = 8;
- var->blue.offset = 0;
- break;
- }
-
- return 0;
-}
-
-/*
- * Calculate lcd register values from var setting & save into hw
- */
-static void nuc900fb_calculate_lcd_regs(const struct fb_info *info,
- struct nuc900fb_hw *regs)
-{
- const struct fb_var_screeninfo *var = &info->var;
- int vtt = var->height + var->upper_margin + var->lower_margin;
- int htt = var->width + var->left_margin + var->right_margin;
- int hsync = var->width + var->right_margin;
- int vsync = var->height + var->lower_margin;
-
- regs->lcd_crtc_size = LCM_CRTC_SIZE_VTTVAL(vtt) |
- LCM_CRTC_SIZE_HTTVAL(htt);
- regs->lcd_crtc_dend = LCM_CRTC_DEND_VDENDVAL(var->height) |
- LCM_CRTC_DEND_HDENDVAL(var->width);
- regs->lcd_crtc_hr = LCM_CRTC_HR_EVAL(var->width + 5) |
- LCM_CRTC_HR_SVAL(var->width + 1);
- regs->lcd_crtc_hsync = LCM_CRTC_HSYNC_EVAL(hsync + var->hsync_len) |
- LCM_CRTC_HSYNC_SVAL(hsync);
- regs->lcd_crtc_vr = LCM_CRTC_VR_EVAL(vsync + var->vsync_len) |
- LCM_CRTC_VR_SVAL(vsync);
-
-}
-
-/*
- * Activate (set) the controller from the given framebuffer
- * information
- */
-static void nuc900fb_activate_var(struct fb_info *info)
-{
- struct nuc900fb_info *fbi = info->par;
- void __iomem *regs = fbi->io;
- struct fb_var_screeninfo *var = &info->var;
- int clkdiv;
-
- clkdiv = nuc900fb_calc_pixclk(fbi, var->pixclock) - 1;
- if (clkdiv < 0)
- clkdiv = 0;
-
- nuc900fb_calculate_lcd_regs(info, &fbi->regs);
-
- /* set the new lcd registers*/
-
- dev_dbg(fbi->dev, "new lcd register set:\n");
- dev_dbg(fbi->dev, "dccs = 0x%08x\n", fbi->regs.lcd_dccs);
- dev_dbg(fbi->dev, "dev_ctl = 0x%08x\n", fbi->regs.lcd_device_ctrl);
- dev_dbg(fbi->dev, "crtc_size = 0x%08x\n", fbi->regs.lcd_crtc_size);
- dev_dbg(fbi->dev, "crtc_dend = 0x%08x\n", fbi->regs.lcd_crtc_dend);
- dev_dbg(fbi->dev, "crtc_hr = 0x%08x\n", fbi->regs.lcd_crtc_hr);
- dev_dbg(fbi->dev, "crtc_hsync = 0x%08x\n", fbi->regs.lcd_crtc_hsync);
- dev_dbg(fbi->dev, "crtc_vr = 0x%08x\n", fbi->regs.lcd_crtc_vr);
-
- writel(fbi->regs.lcd_device_ctrl, regs + REG_LCM_DEV_CTRL);
- writel(fbi->regs.lcd_crtc_size, regs + REG_LCM_CRTC_SIZE);
- writel(fbi->regs.lcd_crtc_dend, regs + REG_LCM_CRTC_DEND);
- writel(fbi->regs.lcd_crtc_hr, regs + REG_LCM_CRTC_HR);
- writel(fbi->regs.lcd_crtc_hsync, regs + REG_LCM_CRTC_HSYNC);
- writel(fbi->regs.lcd_crtc_vr, regs + REG_LCM_CRTC_VR);
-
- /* set lcd address pointers */
- nuc900fb_set_lcdaddr(info);
-
- writel(fbi->regs.lcd_dccs, regs + REG_LCM_DCCS);
-}
-
-/*
- * Alters the hardware state.
- *
- */
-static int nuc900fb_set_par(struct fb_info *info)
-{
- struct fb_var_screeninfo *var = &info->var;
-
- switch (var->bits_per_pixel) {
- case 32:
- case 24:
- case 18:
- case 16:
- case 12:
- info->fix.visual = FB_VISUAL_TRUECOLOR;
- break;
- case 1:
- info->fix.visual = FB_VISUAL_MONO01;
- break;
- default:
- info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
- break;
- }
-
- info->fix.line_length = (var->xres_virtual * var->bits_per_pixel) / 8;
-
- /* activate this new configuration */
- nuc900fb_activate_var(info);
- return 0;
-}
-
-static inline unsigned int chan_to_field(unsigned int chan,
- struct fb_bitfield *bf)
-{
- chan &= 0xffff;
- chan >>= 16 - bf->length;
- return chan << bf->offset;
-}
-
-static int nuc900fb_setcolreg(unsigned regno,
- unsigned red, unsigned green, unsigned blue,
- unsigned transp, struct fb_info *info)
-{
- unsigned int val;
-
- switch (info->fix.visual) {
- case FB_VISUAL_TRUECOLOR:
- /* true-colour, use pseuo-palette */
- if (regno < 16) {
- u32 *pal = info->pseudo_palette;
-
- val = chan_to_field(red, &info->var.red);
- val |= chan_to_field(green, &info->var.green);
- val |= chan_to_field(blue, &info->var.blue);
- pal[regno] = val;
- }
- break;
-
- default:
- return 1; /* unknown type */
- }
- return 0;
-}
-
-/**
- * nuc900fb_blank
- *
- */
-static int nuc900fb_blank(int blank_mode, struct fb_info *info)
-{
-
- return 0;
-}
-
-static struct fb_ops nuc900fb_ops = {
- .owner = THIS_MODULE,
- .fb_check_var = nuc900fb_check_var,
- .fb_set_par = nuc900fb_set_par,
- .fb_blank = nuc900fb_blank,
- .fb_setcolreg = nuc900fb_setcolreg,
- .fb_fillrect = cfb_fillrect,
- .fb_copyarea = cfb_copyarea,
- .fb_imageblit = cfb_imageblit,
-};
-
-
-static inline void modify_gpio(void __iomem *reg,
- unsigned long set, unsigned long mask)
-{
- unsigned long tmp;
- tmp = readl(reg) & ~mask;
- writel(tmp | set, reg);
-}
-
-/*
- * Initialise LCD-related registers
- */
-static int nuc900fb_init_registers(struct fb_info *info)
-{
- struct nuc900fb_info *fbi = info->par;
- struct nuc900fb_mach_info *mach_info = dev_get_platdata(fbi->dev);
- void __iomem *regs = fbi->io;
-
- /*reset the display engine*/
- writel(0, regs + REG_LCM_DCCS);
- writel(readl(regs + REG_LCM_DCCS) | LCM_DCCS_ENG_RST,
- regs + REG_LCM_DCCS);
- ndelay(100);
- writel(readl(regs + REG_LCM_DCCS) & (~LCM_DCCS_ENG_RST),
- regs + REG_LCM_DCCS);
- ndelay(100);
-
- writel(0, regs + REG_LCM_DEV_CTRL);
-
- /* config gpio output */
- modify_gpio(W90X900_VA_GPIO + 0x54, mach_info->gpio_dir,
- mach_info->gpio_dir_mask);
- modify_gpio(W90X900_VA_GPIO + 0x58, mach_info->gpio_data,
- mach_info->gpio_data_mask);
-
- return 0;
-}
-
-
-/*
- * Alloc the SDRAM region of NUC900 for the frame buffer.
- * The buffer should be a non-cached, non-buffered, memory region
- * to allow palette and pixel writes without flushing the cache.
- */
-static int nuc900fb_map_video_memory(struct fb_info *info)
-{
- struct nuc900fb_info *fbi = info->par;
- dma_addr_t map_dma;
- unsigned long map_size = PAGE_ALIGN(info->fix.smem_len);
-
- dev_dbg(fbi->dev, "nuc900fb_map_video_memory(fbi=%p) map_size %lu\n",
- fbi, map_size);
-
- info->screen_base = dma_alloc_wc(fbi->dev, map_size, &map_dma,
- GFP_KERNEL);
-
- if (!info->screen_base)
- return -ENOMEM;
-
- memset(info->screen_base, 0x00, map_size);
- info->fix.smem_start = map_dma;
-
- return 0;
-}
-
-static inline void nuc900fb_unmap_video_memory(struct fb_info *info)
-{
- struct nuc900fb_info *fbi = info->par;
- dma_free_wc(fbi->dev, PAGE_ALIGN(info->fix.smem_len),
- info->screen_base, info->fix.smem_start);
-}
-
-static irqreturn_t nuc900fb_irqhandler(int irq, void *dev_id)
-{
- struct nuc900fb_info *fbi = dev_id;
- void __iomem *regs = fbi->io;
- void __iomem *irq_base = fbi->irq_base;
- unsigned long lcdirq = readl(regs + REG_LCM_INT_CS);
-
- if (lcdirq & LCM_INT_CS_DISP_F_STATUS) {
- writel(readl(irq_base) | 1<<30, irq_base);
-
- /* wait VA_EN low */
- if ((readl(regs + REG_LCM_DCCS) &
- LCM_DCCS_SINGLE) == LCM_DCCS_SINGLE)
- while ((readl(regs + REG_LCM_DCCS) &
- LCM_DCCS_VA_EN) == LCM_DCCS_VA_EN)
- ;
- /* display_out-enable */
- writel(readl(regs + REG_LCM_DCCS) | LCM_DCCS_DISP_OUT_EN,
- regs + REG_LCM_DCCS);
- /* va-enable*/
- writel(readl(regs + REG_LCM_DCCS) | LCM_DCCS_VA_EN,
- regs + REG_LCM_DCCS);
- } else if (lcdirq & LCM_INT_CS_UNDERRUN_INT) {
- writel(readl(irq_base) | LCM_INT_CS_UNDERRUN_INT, irq_base);
- } else if (lcdirq & LCM_INT_CS_BUS_ERROR_INT) {
- writel(readl(irq_base) | LCM_INT_CS_BUS_ERROR_INT, irq_base);
- }
-
- return IRQ_HANDLED;
-}
-
-#ifdef CONFIG_CPU_FREQ
-
-static int nuc900fb_cpufreq_transition(struct notifier_block *nb,
- unsigned long val, void *data)
-{
- struct nuc900fb_info *info;
- struct fb_info *fbinfo;
- long delta_f;
- info = container_of(nb, struct nuc900fb_info, freq_transition);
- fbinfo = dev_get_drvdata(info->dev);
-
- delta_f = info->clk_rate - clk_get_rate(info->clk);
-
- if ((val == CPUFREQ_POSTCHANGE && delta_f > 0) ||
- (val == CPUFREQ_PRECHANGE && delta_f < 0)) {
- info->clk_rate = clk_get_rate(info->clk);
- nuc900fb_activate_var(fbinfo);
- }
-
- return 0;
-}
-
-static inline int nuc900fb_cpufreq_register(struct nuc900fb_info *fbi)
-{
- fbi->freq_transition.notifier_call = nuc900fb_cpufreq_transition;
- return cpufreq_register_notifier(&fbi->freq_transition,
- CPUFREQ_TRANSITION_NOTIFIER);
-}
-
-static inline void nuc900fb_cpufreq_deregister(struct nuc900fb_info *fbi)
-{
- cpufreq_unregister_notifier(&fbi->freq_transition,
- CPUFREQ_TRANSITION_NOTIFIER);
-}
-#else
-static inline int nuc900fb_cpufreq_transition(struct notifier_block *nb,
- unsigned long val, void *data)
-{
- return 0;
-}
-
-static inline int nuc900fb_cpufreq_register(struct nuc900fb_info *fbi)
-{
- return 0;
-}
-
-static inline void nuc900fb_cpufreq_deregister(struct nuc900fb_info *info)
-{
-}
-#endif
-
-static char driver_name[] = "nuc900fb";
-
-static int nuc900fb_probe(struct platform_device *pdev)
-{
- struct nuc900fb_info *fbi;
- struct nuc900fb_display *display;
- struct fb_info *fbinfo;
- struct nuc900fb_mach_info *mach_info;
- struct resource *res;
- int ret;
- int irq;
- int i;
- int size;
-
- dev_dbg(&pdev->dev, "devinit\n");
- mach_info = dev_get_platdata(&pdev->dev);
- if (mach_info == NULL) {
- dev_err(&pdev->dev,
- "no platform data for lcd, cannot attach\n");
- return -EINVAL;
- }
-
- if (mach_info->default_display > mach_info->num_displays) {
- dev_err(&pdev->dev,
- "default display No. is %d but only %d displays \n",
- mach_info->default_display, mach_info->num_displays);
- return -EINVAL;
- }
-
-
- display = mach_info->displays + mach_info->default_display;
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- dev_err(&pdev->dev, "no irq for device\n");
- return -ENOENT;
- }
-
- fbinfo = framebuffer_alloc(sizeof(struct nuc900fb_info), &pdev->dev);
- if (!fbinfo)
- return -ENOMEM;
-
- platform_set_drvdata(pdev, fbinfo);
-
- fbi = fbinfo->par;
- fbi->dev = &pdev->dev;
-
-#ifdef CONFIG_CPU_NUC950
- fbi->drv_type = LCDDRV_NUC950;
-#endif
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
- size = resource_size(res);
- fbi->mem = request_mem_region(res->start, size, pdev->name);
- if (fbi->mem == NULL) {
- dev_err(&pdev->dev, "failed to alloc memory region\n");
- ret = -ENOENT;
- goto free_fb;
- }
-
- fbi->io = ioremap(res->start, size);
- if (fbi->io == NULL) {
- dev_err(&pdev->dev, "ioremap() of lcd registers failed\n");
- ret = -ENXIO;
- goto release_mem_region;
- }
-
- fbi->irq_base = fbi->io + REG_LCM_INT_CS;
-
-
- /* Stop the LCD */
- writel(0, fbi->io + REG_LCM_DCCS);
-
- /* fill the fbinfo*/
- strcpy(fbinfo->fix.id, driver_name);
- fbinfo->fix.type = FB_TYPE_PACKED_PIXELS;
- fbinfo->fix.type_aux = 0;
- fbinfo->fix.xpanstep = 0;
- fbinfo->fix.ypanstep = 0;
- fbinfo->fix.ywrapstep = 0;
- fbinfo->fix.accel = FB_ACCEL_NONE;
- fbinfo->var.nonstd = 0;
- fbinfo->var.activate = FB_ACTIVATE_NOW;
- fbinfo->var.accel_flags = 0;
- fbinfo->var.vmode = FB_VMODE_NONINTERLACED;
- fbinfo->fbops = &nuc900fb_ops;
- fbinfo->flags = FBINFO_FLAG_DEFAULT;
- fbinfo->pseudo_palette = &fbi->pseudo_pal;
-
- ret = request_irq(irq, nuc900fb_irqhandler, 0, pdev->name, fbi);
- if (ret) {
- dev_err(&pdev->dev, "cannot register irq handler %d -err %d\n",
- irq, ret);
- ret = -EBUSY;
- goto release_regs;
- }
-
- fbi->clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(fbi->clk)) {
- printk(KERN_ERR "nuc900-lcd:failed to get lcd clock source\n");
- ret = PTR_ERR(fbi->clk);
- goto release_irq;
- }
-
- clk_enable(fbi->clk);
- dev_dbg(&pdev->dev, "got and enabled clock\n");
-
- fbi->clk_rate = clk_get_rate(fbi->clk);
-
- /* calutate the video buffer size */
- for (i = 0; i < mach_info->num_displays; i++) {
- unsigned long smem_len = mach_info->displays[i].xres;
- smem_len *= mach_info->displays[i].yres;
- smem_len *= mach_info->displays[i].bpp;
- smem_len >>= 3;
- if (fbinfo->fix.smem_len < smem_len)
- fbinfo->fix.smem_len = smem_len;
- }
-
- /* Initialize Video Memory */
- ret = nuc900fb_map_video_memory(fbinfo);
- if (ret) {
- printk(KERN_ERR "Failed to allocate video RAM: %x\n", ret);
- goto release_clock;
- }
-
- dev_dbg(&pdev->dev, "got video memory\n");
-
- fbinfo->var.xres = display->xres;
- fbinfo->var.yres = display->yres;
- fbinfo->var.bits_per_pixel = display->bpp;
-
- nuc900fb_init_registers(fbinfo);
-
- nuc900fb_check_var(&fbinfo->var, fbinfo);
-
- ret = nuc900fb_cpufreq_register(fbi);
- if (ret < 0) {
- dev_err(&pdev->dev, "Failed to register cpufreq\n");
- goto free_video_memory;
- }
-
- ret = register_framebuffer(fbinfo);
- if (ret) {
- printk(KERN_ERR "failed to register framebuffer device: %d\n",
- ret);
- goto free_cpufreq;
- }
-
- fb_info(fbinfo, "%s frame buffer device\n", fbinfo->fix.id);
-
- return 0;
-
-free_cpufreq:
- nuc900fb_cpufreq_deregister(fbi);
-free_video_memory:
- nuc900fb_unmap_video_memory(fbinfo);
-release_clock:
- clk_disable(fbi->clk);
- clk_put(fbi->clk);
-release_irq:
- free_irq(irq, fbi);
-release_regs:
- iounmap(fbi->io);
-release_mem_region:
- release_mem_region(res->start, size);
-free_fb:
- framebuffer_release(fbinfo);
- return ret;
-}
-
-/*
- * shutdown the lcd controller
- */
-static void nuc900fb_stop_lcd(struct fb_info *info)
-{
- struct nuc900fb_info *fbi = info->par;
- void __iomem *regs = fbi->io;
-
- writel((~LCM_DCCS_DISP_INT_EN) | (~LCM_DCCS_VA_EN) | (~LCM_DCCS_OSD_EN),
- regs + REG_LCM_DCCS);
-}
-
-/*
- * Cleanup
- */
-static int nuc900fb_remove(struct platform_device *pdev)
-{
- struct fb_info *fbinfo = platform_get_drvdata(pdev);
- struct nuc900fb_info *fbi = fbinfo->par;
- int irq;
-
- nuc900fb_stop_lcd(fbinfo);
- msleep(1);
-
- unregister_framebuffer(fbinfo);
- nuc900fb_cpufreq_deregister(fbi);
- nuc900fb_unmap_video_memory(fbinfo);
-
- iounmap(fbi->io);
-
- irq = platform_get_irq(pdev, 0);
- free_irq(irq, fbi);
-
- release_resource(fbi->mem);
- kfree(fbi->mem);
-
- framebuffer_release(fbinfo);
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-
-/*
- * suspend and resume support for the lcd controller
- */
-
-static int nuc900fb_suspend(struct platform_device *dev, pm_message_t state)
-{
- struct fb_info *fbinfo = platform_get_drvdata(dev);
- struct nuc900fb_info *info = fbinfo->par;
-
- nuc900fb_stop_lcd(fbinfo);
- msleep(1);
- clk_disable(info->clk);
- return 0;
-}
-
-static int nuc900fb_resume(struct platform_device *dev)
-{
- struct fb_info *fbinfo = platform_get_drvdata(dev);
- struct nuc900fb_info *fbi = fbinfo->par;
-
- printk(KERN_INFO "nuc900fb resume\n");
-
- clk_enable(fbi->clk);
- msleep(1);
-
- nuc900fb_init_registers(fbinfo);
- nuc900fb_activate_var(fbinfo);
-
- return 0;
-}
-
-#else
-#define nuc900fb_suspend NULL
-#define nuc900fb_resume NULL
-#endif
-
-static struct platform_driver nuc900fb_driver = {
- .probe = nuc900fb_probe,
- .remove = nuc900fb_remove,
- .suspend = nuc900fb_suspend,
- .resume = nuc900fb_resume,
- .driver = {
- .name = "nuc900-lcd",
- },
-};
-
-module_platform_driver(nuc900fb_driver);
-
-MODULE_DESCRIPTION("Framebuffer driver for the NUC900");
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/nuc900fb.h b/drivers/video/fbdev/nuc900fb.h
deleted file mode 100644
index 055ae9297931..000000000000
--- a/drivers/video/fbdev/nuc900fb.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- *
- * Copyright (c) 2009 Nuvoton technology corporation
- * All rights reserved.
- *
- * Author:
- * Wang Qiang(rurality.linux@gmail.com) 2009/12/16
- */
-
-#ifndef __NUC900FB_H
-#define __NUC900FB_H
-
-#include <mach/map.h>
-#include <linux/platform_data/video-nuc900fb.h>
-
-enum nuc900_lcddrv_type {
- LCDDRV_NUC910,
- LCDDRV_NUC930,
- LCDDRV_NUC932,
- LCDDRV_NUC950,
- LCDDRV_NUC960,
-};
-
-
-#define PALETTE_BUFFER_SIZE 256
-#define PALETTE_BUFF_CLEAR (0x80000000) /* entry is clear/invalid */
-
-struct nuc900fb_info {
- struct device *dev;
- struct clk *clk;
-
- struct resource *mem;
- void __iomem *io;
- void __iomem *irq_base;
- int drv_type;
- struct nuc900fb_hw regs;
- unsigned long clk_rate;
-
-#ifdef CONFIG_CPU_FREQ
- struct notifier_block freq_transition;
-#endif
-
- /* keep these registers in case we need to re-write palette */
- u32 palette_buffer[PALETTE_BUFFER_SIZE];
- u32 pseudo_pal[16];
-};
-
-int nuc900fb_init(void);
-
-#endif /* __NUC900FB_H */
diff --git a/include/Kbuild b/include/Kbuild
index c38f0d46b267..4d5a03a81fb5 100644
--- a/include/Kbuild
+++ b/include/Kbuild
@@ -550,7 +550,6 @@ header-test- += linux/platform_data/sky81452-backlight.h
header-test- += linux/platform_data/spi-davinci.h
header-test- += linux/platform_data/spi-ep93xx.h
header-test- += linux/platform_data/spi-mt65xx.h
-header-test- += linux/platform_data/spi-nuc900.h
header-test- += linux/platform_data/st_sensors_pdata.h
header-test- += linux/platform_data/ti-sysc.h
header-test- += linux/platform_data/timer-ixp4xx.h
@@ -569,7 +568,6 @@ header-test- += linux/platform_data/usb3503.h
header-test- += linux/platform_data/ux500_wdt.h
header-test- += linux/platform_data/video-clcd-versatile.h
header-test- += linux/platform_data/video-imxfb.h
-header-test- += linux/platform_data/video-nuc900fb.h
header-test- += linux/platform_data/video-pxafb.h
header-test- += linux/platform_data/video_s3c.h
header-test- += linux/platform_data/voltage-omap.h
diff --git a/include/dt-bindings/bus/moxtet.h b/include/dt-bindings/bus/moxtet.h
new file mode 100644
index 000000000000..dc9345440ebe
--- /dev/null
+++ b/include/dt-bindings/bus/moxtet.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Constant for device tree bindings for Turris Mox module configuration bus
+ *
+ * Copyright (C) 2019 Marek Behun <marek.behun@nic.cz>
+ */
+
+#ifndef _DT_BINDINGS_BUS_MOXTET_H
+#define _DT_BINDINGS_BUS_MOXTET_H
+
+#define MOXTET_IRQ_PCI 0
+#define MOXTET_IRQ_USB3 4
+#define MOXTET_IRQ_PERIDOT(n) (8 + (n))
+#define MOXTET_IRQ_TOPAZ 12
+
+#endif /* _DT_BINDINGS_BUS_MOXTET_H */
diff --git a/include/dt-bindings/power/meson-g12a-power.h b/include/dt-bindings/power/meson-g12a-power.h
new file mode 100644
index 000000000000..bb5e67a842de
--- /dev/null
+++ b/include/dt-bindings/power/meson-g12a-power.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#ifndef _DT_BINDINGS_MESON_G12A_POWER_H
+#define _DT_BINDINGS_MESON_G12A_POWER_H
+
+#define PWRC_G12A_VPU_ID 0
+#define PWRC_G12A_ETH_ID 1
+
+#endif
diff --git a/include/dt-bindings/power/meson-sm1-power.h b/include/dt-bindings/power/meson-sm1-power.h
new file mode 100644
index 000000000000..a020ab00c134
--- /dev/null
+++ b/include/dt-bindings/power/meson-sm1-power.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#ifndef _DT_BINDINGS_MESON_SM1_POWER_H
+#define _DT_BINDINGS_MESON_SM1_POWER_H
+
+#define PWRC_SM1_VPU_ID 0
+#define PWRC_SM1_NNA_ID 1
+#define PWRC_SM1_USB_ID 2
+#define PWRC_SM1_PCIE_ID 3
+#define PWRC_SM1_GE2D_ID 4
+#define PWRC_SM1_AUDIO_ID 5
+#define PWRC_SM1_ETH_ID 6
+
+#endif
diff --git a/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h b/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h
index 524d6077ac1b..ea5058618863 100644
--- a/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h
+++ b/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h
@@ -1,56 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
/*
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
* Copyright (c) 2016 BayLibre, SAS.
* Author: Neil Armstrong <narmstrong@baylibre.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see <http://www.gnu.org/licenses/>.
- * The full GNU General Public License is included in this distribution
- * in the file called COPYING.
- *
- * BSD LICENSE
- *
- * Copyright (c) 2016 BayLibre, SAS.
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H
#define _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H
diff --git a/include/dt-bindings/reset/amlogic,meson8b-reset.h b/include/dt-bindings/reset/amlogic,meson8b-reset.h
index 614aff2c7aff..c614438bcbdb 100644
--- a/include/dt-bindings/reset/amlogic,meson8b-reset.h
+++ b/include/dt-bindings/reset/amlogic,meson8b-reset.h
@@ -1,56 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
/*
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
* Copyright (c) 2016 BayLibre, SAS.
* Author: Neil Armstrong <narmstrong@baylibre.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see <http://www.gnu.org/licenses/>.
- * The full GNU General Public License is included in this distribution
- * in the file called COPYING.
- *
- * BSD LICENSE
- *
- * Copyright (c) 2016 BayLibre, SAS.
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _DT_BINDINGS_AMLOGIC_MESON8B_RESET_H
#define _DT_BINDINGS_AMLOGIC_MESON8B_RESET_H
diff --git a/include/dt-bindings/reset/imx8mq-reset.h b/include/dt-bindings/reset/imx8mq-reset.h
index 57c592498aa0..9a301082d361 100644
--- a/include/dt-bindings/reset/imx8mq-reset.h
+++ b/include/dt-bindings/reset/imx8mq-reset.h
@@ -31,33 +31,33 @@
#define IMX8MQ_RESET_OTG2_PHY_RESET 20
#define IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N 21
#define IMX8MQ_RESET_MIPI_DSI_RESET_N 22
-#define IMX8MQ_RESET_MIPI_DIS_DPI_RESET_N 23
-#define IMX8MQ_RESET_MIPI_DIS_ESC_RESET_N 24
-#define IMX8MQ_RESET_MIPI_DIS_PCLK_RESET_N 25
+#define IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N 23
+#define IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N 24
+#define IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N 25
#define IMX8MQ_RESET_PCIEPHY 26
#define IMX8MQ_RESET_PCIEPHY_PERST 27
#define IMX8MQ_RESET_PCIE_CTRL_APPS_EN 28
#define IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF 29
-#define IMX8MQ_RESET_HDMI_PHY_APB_RESET 30
+#define IMX8MQ_RESET_HDMI_PHY_APB_RESET 30 /* i.MX8MM does NOT support */
#define IMX8MQ_RESET_DISP_RESET 31
#define IMX8MQ_RESET_GPU_RESET 32
#define IMX8MQ_RESET_VPU_RESET 33
-#define IMX8MQ_RESET_PCIEPHY2 34
-#define IMX8MQ_RESET_PCIEPHY2_PERST 35
-#define IMX8MQ_RESET_PCIE2_CTRL_APPS_EN 36
-#define IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF 37
-#define IMX8MQ_RESET_MIPI_CSI1_CORE_RESET 38
-#define IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET 39
-#define IMX8MQ_RESET_MIPI_CSI1_ESC_RESET 40
-#define IMX8MQ_RESET_MIPI_CSI2_CORE_RESET 41
-#define IMX8MQ_RESET_MIPI_CSI2_PHY_REF_RESET 42
-#define IMX8MQ_RESET_MIPI_CSI2_ESC_RESET 43
+#define IMX8MQ_RESET_PCIEPHY2 34 /* i.MX8MM does NOT support */
+#define IMX8MQ_RESET_PCIEPHY2_PERST 35 /* i.MX8MM does NOT support */
+#define IMX8MQ_RESET_PCIE2_CTRL_APPS_EN 36 /* i.MX8MM does NOT support */
+#define IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF 37 /* i.MX8MM does NOT support */
+#define IMX8MQ_RESET_MIPI_CSI1_CORE_RESET 38 /* i.MX8MM does NOT support */
+#define IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET 39 /* i.MX8MM does NOT support */
+#define IMX8MQ_RESET_MIPI_CSI1_ESC_RESET 40 /* i.MX8MM does NOT support */
+#define IMX8MQ_RESET_MIPI_CSI2_CORE_RESET 41 /* i.MX8MM does NOT support */
+#define IMX8MQ_RESET_MIPI_CSI2_PHY_REF_RESET 42 /* i.MX8MM does NOT support */
+#define IMX8MQ_RESET_MIPI_CSI2_ESC_RESET 43 /* i.MX8MM does NOT support */
#define IMX8MQ_RESET_DDRC1_PRST 44
#define IMX8MQ_RESET_DDRC1_CORE_RESET 45
#define IMX8MQ_RESET_DDRC1_PHY_RESET 46
-#define IMX8MQ_RESET_DDRC2_PRST 47
-#define IMX8MQ_RESET_DDRC2_CORE_RESET 48
-#define IMX8MQ_RESET_DDRC2_PHY_RESET 49
+#define IMX8MQ_RESET_DDRC2_PRST 47 /* i.MX8MM does NOT support */
+#define IMX8MQ_RESET_DDRC2_CORE_RESET 48 /* i.MX8MM does NOT support */
+#define IMX8MQ_RESET_DDRC2_PHY_RESET 49 /* i.MX8MM does NOT support */
#define IMX8MQ_RESET_NUM 50
diff --git a/include/dt-bindings/soc/ti,sci_pm_domain.h b/include/dt-bindings/soc/ti,sci_pm_domain.h
new file mode 100644
index 000000000000..8f2a7360b65e
--- /dev/null
+++ b/include/dt-bindings/soc/ti,sci_pm_domain.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __DT_BINDINGS_TI_SCI_PM_DOMAIN_H
+#define __DT_BINDINGS_TI_SCI_PM_DOMAIN_H
+
+#define TI_SCI_PD_EXCLUSIVE 1
+#define TI_SCI_PD_SHARED 0
+
+#endif /* __DT_BINDINGS_TI_SCI_PM_DOMAIN_H */
diff --git a/include/linux/firmware/imx/dsp.h b/include/linux/firmware/imx/dsp.h
new file mode 100644
index 000000000000..7562099c9e46
--- /dev/null
+++ b/include/linux/firmware/imx/dsp.h
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ *
+ * Header file for the DSP IPC implementation
+ */
+
+#ifndef _IMX_DSP_IPC_H
+#define _IMX_DSP_IPC_H
+
+#include <linux/device.h>
+#include <linux/types.h>
+#include <linux/mailbox_client.h>
+
+#define DSP_MU_CHAN_NUM 4
+
+struct imx_dsp_chan {
+ struct imx_dsp_ipc *ipc;
+ struct mbox_client cl;
+ struct mbox_chan *ch;
+ char *name;
+ int idx;
+};
+
+struct imx_dsp_ops {
+ void (*handle_reply)(struct imx_dsp_ipc *ipc);
+ void (*handle_request)(struct imx_dsp_ipc *ipc);
+};
+
+struct imx_dsp_ipc {
+ /* Host <-> DSP communication uses 2 txdb and 2 rxdb channels */
+ struct imx_dsp_chan chans[DSP_MU_CHAN_NUM];
+ struct device *dev;
+ struct imx_dsp_ops *ops;
+ void *private_data;
+};
+
+static inline void imx_dsp_set_data(struct imx_dsp_ipc *ipc, void *data)
+{
+ if (!ipc)
+ return;
+
+ ipc->private_data = data;
+}
+
+static inline void *imx_dsp_get_data(struct imx_dsp_ipc *ipc)
+{
+ if (!ipc)
+ return NULL;
+
+ return ipc->private_data;
+}
+
+#if IS_ENABLED(CONFIG_IMX_DSP)
+
+int imx_dsp_ring_doorbell(struct imx_dsp_ipc *dsp, unsigned int chan_idx);
+
+#else
+
+static inline int imx_dsp_ring_doorbell(struct imx_dsp_ipc *ipc,
+ unsigned int chan_idx)
+{
+ return -ENOTSUPP;
+}
+
+#endif
+#endif /* _IMX_DSP_IPC_H */
diff --git a/include/linux/moxtet.h b/include/linux/moxtet.h
new file mode 100644
index 000000000000..490db6886dcc
--- /dev/null
+++ b/include/linux/moxtet.h
@@ -0,0 +1,109 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Turris Mox module configuration bus driver
+ *
+ * Copyright (C) 2019 Marek Behun <marek.behun@nic.cz>
+ */
+
+#ifndef __LINUX_MOXTET_H
+#define __LINUX_MOXTET_H
+
+#include <linux/device.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/mutex.h>
+
+#define TURRIS_MOX_MAX_MODULES 10
+
+enum turris_mox_cpu_module_id {
+ TURRIS_MOX_CPU_ID_EMMC = 0x00,
+ TURRIS_MOX_CPU_ID_SD = 0x10,
+};
+
+enum turris_mox_module_id {
+ TURRIS_MOX_MODULE_FIRST = 0x01,
+
+ TURRIS_MOX_MODULE_SFP = 0x01,
+ TURRIS_MOX_MODULE_PCI = 0x02,
+ TURRIS_MOX_MODULE_TOPAZ = 0x03,
+ TURRIS_MOX_MODULE_PERIDOT = 0x04,
+ TURRIS_MOX_MODULE_USB3 = 0x05,
+ TURRIS_MOX_MODULE_PCI_BRIDGE = 0x06,
+
+ TURRIS_MOX_MODULE_LAST = 0x06,
+};
+
+#define MOXTET_NIRQS 16
+
+extern struct bus_type moxtet_type;
+
+struct moxtet {
+ struct device *dev;
+ struct mutex lock;
+ u8 modules[TURRIS_MOX_MAX_MODULES];
+ int count;
+ u8 tx[TURRIS_MOX_MAX_MODULES];
+ int dev_irq;
+ struct {
+ struct irq_domain *domain;
+ struct irq_chip chip;
+ unsigned long masked, exists;
+ struct moxtet_irqpos {
+ u8 idx;
+ u8 bit;
+ } position[MOXTET_NIRQS];
+ } irq;
+#ifdef CONFIG_DEBUG_FS
+ struct dentry *debugfs_root;
+#endif
+};
+
+struct moxtet_driver {
+ const enum turris_mox_module_id *id_table;
+ struct device_driver driver;
+};
+
+static inline struct moxtet_driver *
+to_moxtet_driver(struct device_driver *drv)
+{
+ if (!drv)
+ return NULL;
+ return container_of(drv, struct moxtet_driver, driver);
+}
+
+extern int __moxtet_register_driver(struct module *owner,
+ struct moxtet_driver *mdrv);
+
+static inline void moxtet_unregister_driver(struct moxtet_driver *mdrv)
+{
+ if (mdrv)
+ driver_unregister(&mdrv->driver);
+}
+
+#define moxtet_register_driver(driver) \
+ __moxtet_register_driver(THIS_MODULE, driver)
+
+#define module_moxtet_driver(__moxtet_driver) \
+ module_driver(__moxtet_driver, moxtet_register_driver, \
+ moxtet_unregister_driver)
+
+struct moxtet_device {
+ struct device dev;
+ struct moxtet *moxtet;
+ enum turris_mox_module_id id;
+ unsigned int idx;
+};
+
+extern int moxtet_device_read(struct device *dev);
+extern int moxtet_device_write(struct device *dev, u8 val);
+extern int moxtet_device_written(struct device *dev);
+
+static inline struct moxtet_device *
+to_moxtet_device(struct device *dev)
+{
+ if (!dev)
+ return NULL;
+ return container_of(dev, struct moxtet_device, dev);
+}
+
+#endif /* __LINUX_MOXTET_H */
diff --git a/include/linux/platform_data/spi-nuc900.h b/include/linux/platform_data/spi-nuc900.h
deleted file mode 100644
index ca3510877000..000000000000
--- a/include/linux/platform_data/spi-nuc900.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (c) 2009 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- */
-
-#ifndef __SPI_NUC900_H
-#define __SPI_NUC900_H
-
-extern void mfp_set_groupg(struct device *dev, const char *subname);
-
-struct nuc900_spi_info {
- unsigned int num_cs;
- unsigned int lsb;
- unsigned int txneg;
- unsigned int rxneg;
- unsigned int divider;
- unsigned int sleep;
- unsigned int txnum;
- unsigned int txbitlen;
- int bus_num;
-};
-
-struct nuc900_spi_chip {
- unsigned char bits_per_word;
-};
-
-#endif /* __SPI_NUC900_H */
diff --git a/include/linux/platform_data/video-nuc900fb.h b/include/linux/platform_data/video-nuc900fb.h
deleted file mode 100644
index 3da504460c91..000000000000
--- a/include/linux/platform_data/video-nuc900fb.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/* linux/include/asm/arch-nuc900/fb.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Changelog:
- *
- * 2008/08/26 vincen.zswan modify this file for LCD.
- */
-
-#ifndef __ASM_ARM_FB_H
-#define __ASM_ARM_FB_H
-
-
-
-/* LCD Controller Hardware Desc */
-struct nuc900fb_hw {
- unsigned int lcd_dccs;
- unsigned int lcd_device_ctrl;
- unsigned int lcd_mpulcd_cmd;
- unsigned int lcd_int_cs;
- unsigned int lcd_crtc_size;
- unsigned int lcd_crtc_dend;
- unsigned int lcd_crtc_hr;
- unsigned int lcd_crtc_hsync;
- unsigned int lcd_crtc_vr;
- unsigned int lcd_va_baddr0;
- unsigned int lcd_va_baddr1;
- unsigned int lcd_va_fbctrl;
- unsigned int lcd_va_scale;
- unsigned int lcd_va_test;
- unsigned int lcd_va_win;
- unsigned int lcd_va_stuff;
-};
-
-/* LCD Display Description */
-struct nuc900fb_display {
- /* LCD Image type */
- unsigned type;
-
- /* LCD Screen Size */
- unsigned short width;
- unsigned short height;
-
- /* LCD Screen Info */
- unsigned short xres;
- unsigned short yres;
- unsigned short bpp;
-
- unsigned long pixclock;
- unsigned short left_margin;
- unsigned short right_margin;
- unsigned short hsync_len;
- unsigned short upper_margin;
- unsigned short lower_margin;
- unsigned short vsync_len;
-
- /* hardware special register value */
- unsigned int dccs;
- unsigned int devctl;
- unsigned int fbctrl;
- unsigned int scale;
-};
-
-struct nuc900fb_mach_info {
- struct nuc900fb_display *displays;
- unsigned num_displays;
- unsigned default_display;
- /* GPIO Setting Info */
- unsigned gpio_dir;
- unsigned gpio_dir_mask;
- unsigned gpio_data;
- unsigned gpio_data_mask;
-};
-
-extern void __init nuc900_fb_set_platdata(struct nuc900fb_mach_info *);
-
-#endif /* __ASM_ARM_FB_H */
diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h
index 3f12cc77fb58..2d5eff506e13 100644
--- a/include/linux/qcom_scm.h
+++ b/include/linux/qcom_scm.h
@@ -49,8 +49,9 @@ extern int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr,
extern int qcom_scm_pas_auth_and_reset(u32 peripheral);
extern int qcom_scm_pas_shutdown(u32 peripheral);
extern int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
- unsigned int *src, struct qcom_scm_vmperm *newvm,
- int dest_cnt);
+ unsigned int *src,
+ const struct qcom_scm_vmperm *newvm,
+ unsigned int dest_cnt);
extern void qcom_scm_cpu_power_down(u32 flags);
extern u32 qcom_scm_get_version(void);
extern int qcom_scm_set_remote_state(u32 state, u32 id);
@@ -87,8 +88,8 @@ qcom_scm_pas_auth_and_reset(u32 peripheral) { return -ENODEV; }
static inline int qcom_scm_pas_shutdown(u32 peripheral) { return -ENODEV; }
static inline int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
unsigned int *src,
- struct qcom_scm_vmperm *newvm,
- int dest_cnt) { return -ENODEV; }
+ const struct qcom_scm_vmperm *newvm,
+ unsigned int dest_cnt) { return -ENODEV; }
static inline void qcom_scm_cpu_power_down(u32 flags) {}
static inline u32 qcom_scm_get_version(void) { return 0; }
static inline u32
diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h
index 9ff2e9357e9a..881fea47c83d 100644
--- a/include/linux/scmi_protocol.h
+++ b/include/linux/scmi_protocol.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* SCMI Message Protocol driver header
*
@@ -71,7 +71,7 @@ struct scmi_clk_ops {
int (*rate_get)(const struct scmi_handle *handle, u32 clk_id,
u64 *rate);
int (*rate_set)(const struct scmi_handle *handle, u32 clk_id,
- u32 config, u64 rate);
+ u64 rate);
int (*enable)(const struct scmi_handle *handle, u32 clk_id);
int (*disable)(const struct scmi_handle *handle, u32 clk_id);
};
@@ -145,6 +145,8 @@ struct scmi_sensor_info {
u32 id;
u8 type;
s8 scale;
+ u8 num_trip_points;
+ bool async;
char name[SCMI_MAX_STR_SIZE];
};
@@ -167,9 +169,9 @@ enum scmi_sensor_class {
*
* @count_get: get the count of sensors provided by SCMI
* @info_get: get the information of the specified sensor
- * @configuration_set: control notifications on cross-over events for
+ * @trip_point_notify: control notifications on cross-over events for
* the trip-points
- * @trip_point_set: selects and configures a trip-point of interest
+ * @trip_point_config: selects and configures a trip-point of interest
* @reading_get: gets the current value of the sensor
*/
struct scmi_sensor_ops {
@@ -177,12 +179,32 @@ struct scmi_sensor_ops {
const struct scmi_sensor_info *(*info_get)
(const struct scmi_handle *handle, u32 sensor_id);
- int (*configuration_set)(const struct scmi_handle *handle,
- u32 sensor_id);
- int (*trip_point_set)(const struct scmi_handle *handle, u32 sensor_id,
- u8 trip_id, u64 trip_value);
+ int (*trip_point_notify)(const struct scmi_handle *handle,
+ u32 sensor_id, bool enable);
+ int (*trip_point_config)(const struct scmi_handle *handle,
+ u32 sensor_id, u8 trip_id, u64 trip_value);
int (*reading_get)(const struct scmi_handle *handle, u32 sensor_id,
- bool async, u64 *value);
+ u64 *value);
+};
+
+/**
+ * struct scmi_reset_ops - represents the various operations provided
+ * by SCMI Reset Protocol
+ *
+ * @num_domains_get: get the count of reset domains provided by SCMI
+ * @name_get: gets the name of a reset domain
+ * @latency_get: gets the reset latency for the specified reset domain
+ * @reset: resets the specified reset domain
+ * @assert: explicitly assert reset signal of the specified reset domain
+ * @deassert: explicitly deassert reset signal of the specified reset domain
+ */
+struct scmi_reset_ops {
+ int (*num_domains_get)(const struct scmi_handle *handle);
+ char *(*name_get)(const struct scmi_handle *handle, u32 domain);
+ int (*latency_get)(const struct scmi_handle *handle, u32 domain);
+ int (*reset)(const struct scmi_handle *handle, u32 domain);
+ int (*assert)(const struct scmi_handle *handle, u32 domain);
+ int (*deassert)(const struct scmi_handle *handle, u32 domain);
};
/**
@@ -194,6 +216,7 @@ struct scmi_sensor_ops {
* @perf_ops: pointer to set of performance protocol operations
* @clk_ops: pointer to set of clock protocol operations
* @sensor_ops: pointer to set of sensor protocol operations
+ * @reset_ops: pointer to set of reset protocol operations
* @perf_priv: pointer to private data structure specific to performance
* protocol(for internal use only)
* @clk_priv: pointer to private data structure specific to clock
@@ -202,6 +225,8 @@ struct scmi_sensor_ops {
* protocol(for internal use only)
* @sensor_priv: pointer to private data structure specific to sensors
* protocol(for internal use only)
+ * @reset_priv: pointer to private data structure specific to reset
+ * protocol(for internal use only)
*/
struct scmi_handle {
struct device *dev;
@@ -210,11 +235,13 @@ struct scmi_handle {
struct scmi_clk_ops *clk_ops;
struct scmi_power_ops *power_ops;
struct scmi_sensor_ops *sensor_ops;
+ struct scmi_reset_ops *reset_ops;
/* for protocol internal use */
void *perf_priv;
void *clk_priv;
void *power_priv;
void *sensor_priv;
+ void *reset_priv;
};
enum scmi_std_protocol {
@@ -224,6 +251,7 @@ enum scmi_std_protocol {
SCMI_PROTOCOL_PERF = 0x13,
SCMI_PROTOCOL_CLOCK = 0x14,
SCMI_PROTOCOL_SENSOR = 0x15,
+ SCMI_PROTOCOL_RESET = 0x16,
};
struct scmi_device {
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 54ade13a9b15..f3ae45d02e80 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -63,26 +63,26 @@ void cmdq_pkt_destroy(struct cmdq_pkt *pkt);
/**
* cmdq_pkt_write() - append write command to the CMDQ packet
* @pkt: the CMDQ packet
- * @value: the specified target register value
* @subsys: the CMDQ sub system code
* @offset: register offset from CMDQ sub system
+ * @value: the specified target register value
*
* Return: 0 for success; else the error code is returned
*/
-int cmdq_pkt_write(struct cmdq_pkt *pkt, u32 value, u32 subsys, u32 offset);
+int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value);
/**
* cmdq_pkt_write_mask() - append write command with mask to the CMDQ packet
* @pkt: the CMDQ packet
- * @value: the specified target register value
* @subsys: the CMDQ sub system code
* @offset: register offset from CMDQ sub system
+ * @value: the specified target register value
* @mask: the specified target register mask
*
* Return: 0 for success; else the error code is returned
*/
-int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
- u32 subsys, u32 offset, u32 mask);
+int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
+ u16 offset, u32 value, u32 mask);
/**
* cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
@@ -91,7 +91,7 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
*
* Return: 0 for success; else the error code is returned
*/
-int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u32 event);
+int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event);
/**
* cmdq_pkt_clear_event() - append clear event command to the CMDQ packet
@@ -100,7 +100,7 @@ int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u32 event);
*
* Return: 0 for success; else the error code is returned
*/
-int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u32 event);
+int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u16 event);
/**
* cmdq_pkt_flush_async() - trigger CMDQ to asynchronously execute the CMDQ
diff --git a/include/linux/soc/samsung/exynos-chipid.h b/include/linux/soc/samsung/exynos-chipid.h
new file mode 100644
index 000000000000..8bca6763f99c
--- /dev/null
+++ b/include/linux/soc/samsung/exynos-chipid.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2018 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Exynos - CHIPID support
+ */
+#ifndef __LINUX_SOC_EXYNOS_CHIPID_H
+#define __LINUX_SOC_EXYNOS_CHIPID_H
+
+#define EXYNOS_CHIPID_REG_PRO_ID 0x00
+#define EXYNOS_SUBREV_MASK (0xf << 4)
+#define EXYNOS_MAINREV_MASK (0xf << 0)
+#define EXYNOS_REV_MASK (EXYNOS_SUBREV_MASK | \
+ EXYNOS_MAINREV_MASK)
+#define EXYNOS_MASK 0xfffff000
+
+#define EXYNOS_CHIPID_REG_PKG_ID 0x04
+/* Bit field definitions for EXYNOS_CHIPID_REG_PKG_ID register */
+#define EXYNOS5422_IDS_OFFSET 24
+#define EXYNOS5422_IDS_MASK 0xff
+#define EXYNOS5422_USESG_OFFSET 3
+#define EXYNOS5422_USESG_MASK 0x01
+#define EXYNOS5422_SG_OFFSET 0
+#define EXYNOS5422_SG_MASK 0x07
+#define EXYNOS5422_TABLE_OFFSET 8
+#define EXYNOS5422_TABLE_MASK 0x03
+#define EXYNOS5422_SG_A_OFFSET 17
+#define EXYNOS5422_SG_A_MASK 0x0f
+#define EXYNOS5422_SG_B_OFFSET 21
+#define EXYNOS5422_SG_B_MASK 0x03
+#define EXYNOS5422_SG_BSIGN_OFFSET 23
+#define EXYNOS5422_SG_BSIGN_MASK 0x01
+#define EXYNOS5422_BIN2_OFFSET 12
+#define EXYNOS5422_BIN2_MASK 0x01
+
+#define EXYNOS_CHIPID_REG_LOT_ID 0x14
+
+#define EXYNOS_CHIPID_REG_AUX_INFO 0x1c
+/* Bit field definitions for EXYNOS_CHIPID_REG_AUX_INFO register */
+#define EXYNOS5422_TMCB_OFFSET 0
+#define EXYNOS5422_TMCB_MASK 0x7f
+#define EXYNOS5422_ARM_UP_OFFSET 8
+#define EXYNOS5422_ARM_UP_MASK 0x03
+#define EXYNOS5422_ARM_DN_OFFSET 10
+#define EXYNOS5422_ARM_DN_MASK 0x03
+#define EXYNOS5422_KFC_UP_OFFSET 12
+#define EXYNOS5422_KFC_UP_MASK 0x03
+#define EXYNOS5422_KFC_DN_OFFSET 14
+#define EXYNOS5422_KFC_DN_MASK 0x03
+
+#endif /*__LINUX_SOC_EXYNOS_CHIPID_H */
diff --git a/include/linux/soc/ti/ti_sci_protocol.h b/include/linux/soc/ti/ti_sci_protocol.h
index 6c610e188a44..9531ec823298 100644
--- a/include/linux/soc/ti/ti_sci_protocol.h
+++ b/include/linux/soc/ti/ti_sci_protocol.h
@@ -97,7 +97,10 @@ struct ti_sci_core_ops {
*/
struct ti_sci_dev_ops {
int (*get_device)(const struct ti_sci_handle *handle, u32 id);
+ int (*get_device_exclusive)(const struct ti_sci_handle *handle, u32 id);
int (*idle_device)(const struct ti_sci_handle *handle, u32 id);
+ int (*idle_device_exclusive)(const struct ti_sci_handle *handle,
+ u32 id);
int (*put_device)(const struct ti_sci_handle *handle, u32 id);
int (*is_valid)(const struct ti_sci_handle *handle, u32 id);
int (*get_context_loss_count)(const struct ti_sci_handle *handle,
diff --git a/include/linux/sys_soc.h b/include/linux/sys_soc.h
index b7c70c3e953f..48ceea867dd6 100644
--- a/include/linux/sys_soc.h
+++ b/include/linux/sys_soc.h
@@ -12,6 +12,7 @@ struct soc_device_attribute {
const char *machine;
const char *family;
const char *revision;
+ const char *serial_number;
const char *soc_id;
const void *data;
};
diff --git a/include/video/da8xx-fb.h b/include/video/da8xx-fb.h
index efed3c3383d6..1d19ae62b844 100644
--- a/include/video/da8xx-fb.h
+++ b/include/video/da8xx-fb.h
@@ -32,7 +32,6 @@ struct da8xx_lcdc_platform_data {
const char manu_name[10];
void *controller_data;
const char type[25];
- void (*panel_power_ctrl)(int);
};
struct lcd_ctrl_config {