summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt2
-rw-r--r--Documentation/devicetree/bindings/connector/usb-connector.txt135
-rw-r--r--Documentation/devicetree/bindings/connector/usb-connector.yaml206
-rw-r--r--Documentation/devicetree/bindings/usb/fcs,fusb302.txt2
-rw-r--r--Documentation/devicetree/bindings/usb/generic.txt2
-rw-r--r--Documentation/devicetree/bindings/usb/mediatek,mtu3.txt2
-rw-r--r--Documentation/devicetree/bindings/usb/mediatek,musb.txt2
-rw-r--r--Documentation/devicetree/bindings/usb/richtek,rt1711h.txt2
-rw-r--r--Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt2
-rw-r--r--Documentation/devicetree/bindings/usb/typec-tcpci.txt2
-rw-r--r--Documentation/devicetree/bindings/usb/usb-conn-gpio.txt4
11 files changed, 216 insertions, 145 deletions
diff --git a/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt b/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt
index 22256e295a7a..3dd8961154ab 100644
--- a/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt
+++ b/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt
@@ -19,7 +19,7 @@ Required nodes:
0: High Speed (HS),
3: Mobile High-Definition Link (MHL), specific to 11-pin Samsung micro-USB.
-[1]: bindings/connector/usb-connector.txt
+[1]: bindings/connector/usb-connector.yaml
Example
-------
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.txt b/Documentation/devicetree/bindings/connector/usb-connector.txt
deleted file mode 100644
index 88578ac1a8a7..000000000000
--- a/Documentation/devicetree/bindings/connector/usb-connector.txt
+++ /dev/null
@@ -1,135 +0,0 @@
-USB Connector
-=============
-
-A USB connector node represents a physical USB connector. It should be
-a child of a USB interface controller.
-
-Required properties:
-- compatible: describes type of the connector, must be one of:
- "usb-a-connector",
- "usb-b-connector",
- "usb-c-connector".
-
-Optional properties:
-- label: symbolic name for the connector,
-- type: size of the connector, should be specified in case of USB-A, USB-B
- non-fullsize connectors: "mini", "micro".
-- self-powered: Set this property if the usb device that has its own power
- source.
-
-Optional properties for usb-b-connector:
-- id-gpios: an input gpio for USB ID pin.
-- vbus-gpios: an input gpio for USB VBUS pin, used to detect presence of
- VBUS 5V.
- see gpio/gpio.txt.
-- vbus-supply: a phandle to the regulator for USB VBUS if needed when host
- mode or dual role mode is supported.
- Particularly, if use an output GPIO to control a VBUS regulator, should
- model it as a regulator.
- see regulator/fixed-regulator.yaml
-- pinctrl-names : a pinctrl state named "default" is optional
-- pinctrl-0 : pin control group
- see pinctrl/pinctrl-bindings.txt
-
-Optional properties for usb-c-connector:
-- power-role: should be one of "source", "sink" or "dual"(DRP) if typec
- connector has power support.
-- try-power-role: preferred power role if "dual"(DRP) can support Try.SNK
- or Try.SRC, should be "sink" for Try.SNK or "source" for Try.SRC.
-- data-role: should be one of "host", "device", "dual"(DRD) if typec
- connector supports USB data.
-
-Required properties for usb-c-connector with power delivery support:
-- source-pdos: An array of u32 with each entry providing supported power
- source data object(PDO), the detailed bit definitions of PDO can be found
- in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2
- Source_Capabilities Message, the order of each entry(PDO) should follow
- the PD spec chapter 6.4.1. Required for power source and power dual role.
- User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO()
- defined in dt-bindings/usb/pd.h.
-- sink-pdos: An array of u32 with each entry providing supported power
- sink data object(PDO), the detailed bit definitions of PDO can be found
- in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3
- Sink Capabilities Message, the order of each entry(PDO) should follow
- the PD spec chapter 6.4.1. Required for power sink and power dual role.
- User can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined
- in dt-bindings/usb/pd.h.
-- op-sink-microwatt: Sink required operating power in microwatt, if source
- can't offer the power, Capability Mismatch is set. Required for power
- sink and power dual role.
-
-Required nodes:
-- any data bus to the connector should be modeled using the OF graph bindings
- specified in bindings/graph.txt, unless the bus is between parent node and
- the connector. Since single connector can have multiple data buses every bus
- has assigned OF graph port number as follows:
- 0: High Speed (HS), present in all connectors,
- 1: Super Speed (SS), present in SS capable connectors,
- 2: Sideband use (SBU), present in USB-C.
-
-Examples
---------
-
-1. Micro-USB connector with HS lines routed via controller (MUIC):
-
-muic-max77843@66 {
- ...
- usb_con: connector {
- compatible = "usb-b-connector";
- label = "micro-USB";
- type = "micro";
- };
-};
-
-2. USB-C connector attached to CC controller (s2mm005), HS lines routed
-to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort.
-DisplayPort video lines are routed to the connector via SS mux in USB3 PHY.
-
-ccic: s2mm005@33 {
- ...
- usb_con: connector {
- compatible = "usb-c-connector";
- label = "USB-C";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- usb_con_hs: endpoint {
- remote-endpoint = <&max77865_usbc_hs>;
- };
- };
- port@1 {
- reg = <1>;
- usb_con_ss: endpoint {
- remote-endpoint = <&usbdrd_phy_ss>;
- };
- };
- port@2 {
- reg = <2>;
- usb_con_sbu: endpoint {
- remote-endpoint = <&dp_aux>;
- };
- };
- };
- };
-};
-
-3. USB-C connector attached to a typec port controller(ptn5110), which has
-power delivery support and enables drp.
-
-typec: ptn5110@50 {
- ...
- usb_con: connector {
- compatible = "usb-c-connector";
- label = "USB-C";
- power-role = "dual";
- try-power-role = "sink";
- source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
- sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
- PDO_VAR(5000, 12000, 2000)>;
- op-sink-microwatt = <10000000>;
- };
-};
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
new file mode 100644
index 000000000000..4638d7adb806
--- /dev/null
+++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -0,0 +1,206 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/connector/usb-connector.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: USB Connector
+
+maintainers:
+ - Rob Herring <robh@kernel.org>
+
+description:
+ A USB connector node represents a physical USB connector. It should be a child
+ of a USB interface controller.
+
+properties:
+ compatible:
+ enum:
+ - usb-a-connector
+ - usb-b-connector
+ - usb-c-connector
+
+ label:
+ description: Symbolic name for the connector.
+
+ type:
+ description: Size of the connector, should be specified in case of
+ non-fullsize 'usb-a-connector' or 'usb-b-connector' compatible
+ connectors.
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/string
+ enum:
+ - mini
+ - micro
+
+ self-powered:
+ description: Set this property if the USB device has its own power source.
+ type: boolean
+
+ # The following are optional properties for "usb-b-connector".
+ id-gpios:
+ description: An input gpio for USB ID pin.
+ maxItems: 1
+
+ vbus-gpios:
+ description: An input gpio for USB VBus pin, used to detect presence of
+ VBUS 5V.
+ maxItems: 1
+
+ vbus-supply:
+ description: A phandle to the regulator for USB VBUS if needed when host
+ mode or dual role mode is supported.
+ Particularly, if use an output GPIO to control a VBUS regulator, should
+ model it as a regulator. See bindings/regulator/fixed-regulator.yaml
+
+ # The following are optional properties for "usb-c-connector".
+ power-role:
+ description: Determines the power role that the Type C connector will
+ support. "dual" refers to Dual Role Port (DRP).
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/string
+ enum:
+ - source
+ - sink
+ - dual
+
+ try-power-role:
+ description: Preferred power role.
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/string
+ enum:
+ - source
+ - sink
+ - dual
+
+ data-role:
+ description: Data role if Type C connector supports USB data. "dual" refers
+ Dual Role Device (DRD).
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/string
+ enum:
+ - host
+ - device
+ - dual
+
+ # The following are optional properties for "usb-c-connector" with power
+ # delivery support.
+ source-pdos:
+ description: An array of u32 with each entry providing supported power
+ source data object(PDO), the detailed bit definitions of PDO can be found
+ in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2
+ Source_Capabilities Message, the order of each entry(PDO) should follow
+ the PD spec chapter 6.4.1. Required for power source and power dual role.
+ User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO()
+ defined in dt-bindings/usb/pd.h.
+ minItems: 1
+ maxItems: 7
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ sink-pdos:
+ description: An array of u32 with each entry providing supported power sink
+ data object(PDO), the detailed bit definitions of PDO can be found in
+ "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3
+ Sink Capabilities Message, the order of each entry(PDO) should follow the
+ PD spec chapter 6.4.1. Required for power sink and power dual role. User
+ can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined
+ in dt-bindings/usb/pd.h.
+ minItems: 1
+ maxItems: 7
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ op-sink-microwatt:
+ description: Sink required operating power in microwatt, if source can't
+ offer the power, Capability Mismatch is set. Required for power sink and
+ power dual role.
+
+ ports:
+ description: OF graph bindings (specified in bindings/graph.txt) that model
+ any data bus to the connector unless the bus is between parent node and
+ the connector. Since a single connector can have multiple data buses every
+ bus has an assigned OF graph port number as described below.
+ type: object
+ properties:
+ port@0:
+ type: object
+ description: High Speed (HS), present in all connectors.
+
+ port@1:
+ type: object
+ description: Super Speed (SS), present in SS capable connectors.
+
+ port@2:
+ type: object
+ description: Sideband Use (SBU), present in USB-C. This describes the
+ alternate mode connection of which SBU is a part.
+
+ required:
+ - port@0
+
+required:
+ - compatible
+
+examples:
+ # Micro-USB connector with HS lines routed via controller (MUIC).
+ - |+
+ muic-max77843 {
+ usb_con1: connector {
+ compatible = "usb-b-connector";
+ label = "micro-USB";
+ type = "micro";
+ };
+ };
+
+ # USB-C connector attached to CC controller (s2mm005), HS lines routed
+ # to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort.
+ # DisplayPort video lines are routed to the connector via SS mux in USB3 PHY.
+ - |+
+ ccic: s2mm005 {
+ usb_con2: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ usb_con_hs: endpoint {
+ remote-endpoint = <&max77865_usbc_hs>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ usb_con_ss: endpoint {
+ remote-endpoint = <&usbdrd_phy_ss>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+ usb_con_sbu: endpoint {
+ remote-endpoint = <&dp_aux>;
+ };
+ };
+ };
+ };
+ };
+
+ # USB-C connector attached to a typec port controller(ptn5110), which has
+ # power delivery support and enables drp.
+ - |+
+ #include <dt-bindings/usb/pd.h>
+ typec: ptn5110 {
+ usb_con3: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ power-role = "dual";
+ try-power-role = "sink";
+ source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
+ sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
+ PDO_VAR(5000, 12000, 2000)>;
+ op-sink-microwatt = <10000000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/usb/fcs,fusb302.txt b/Documentation/devicetree/bindings/usb/fcs,fusb302.txt
index ba2e32d500c0..60e4654297af 100644
--- a/Documentation/devicetree/bindings/usb/fcs,fusb302.txt
+++ b/Documentation/devicetree/bindings/usb/fcs,fusb302.txt
@@ -9,7 +9,7 @@ Required sub-node:
- connector : The "usb-c-connector" attached to the FUSB302 IC. The bindings
of the connector node are specified in:
- Documentation/devicetree/bindings/connector/usb-connector.txt
+ Documentation/devicetree/bindings/connector/usb-connector.yaml
Example:
diff --git a/Documentation/devicetree/bindings/usb/generic.txt b/Documentation/devicetree/bindings/usb/generic.txt
index e6790d2a4da9..474e74c06522 100644
--- a/Documentation/devicetree/bindings/usb/generic.txt
+++ b/Documentation/devicetree/bindings/usb/generic.txt
@@ -34,7 +34,7 @@ Optional properties:
- usb-role-switch: boolean, indicates that the device is capable of assigning
the USB data role (USB host or USB device) for a given
USB connector, such as Type-C, Type-B(micro).
- see connector/usb-connector.txt.
+ see connector/usb-connector.yaml.
This is an attribute to a USB controller such as:
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
index e0ae6096f7ac..a82ca438aec1 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
@@ -34,7 +34,7 @@ Optional properties:
dual-role mode.
it's considered valid for compatibility reasons, not allowed for
new bindings, and put into a usb-connector node.
- see connector/usb-connector.txt.
+ see connector/usb-connector.yaml.
- pinctrl-names : a pinctrl state named "default" is optional, and need be
defined if auto drd switch is enabled, that means the property dr_mode
is set as "otg", and meanwhile the property "mediatek,enable-manual-drd"
diff --git a/Documentation/devicetree/bindings/usb/mediatek,musb.txt b/Documentation/devicetree/bindings/usb/mediatek,musb.txt
index 2b8a87c90d9e..5eedb0296562 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,musb.txt
+++ b/Documentation/devicetree/bindings/usb/mediatek,musb.txt
@@ -23,7 +23,7 @@ Optional properties:
MTCMOS
Required child nodes:
- usb connector node as defined in bindings/connector/usb-connector.txt
+ usb connector node as defined in bindings/connector/usb-connector.yaml
Optional properties:
- id-gpios : input GPIO for USB ID pin.
- vbus-gpios : input GPIO for USB VBUS pin.
diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
index e3fc57e605ed..6f8115db2ea9 100644
--- a/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
+++ b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
@@ -9,7 +9,7 @@ Required properties:
Required sub-node:
- connector: The "usb-c-connector" attached to the tcpci chip, the bindings
of connector node are specified in
- Documentation/devicetree/bindings/connector/usb-connector.txt
+ Documentation/devicetree/bindings/connector/usb-connector.yaml
Example :
rt1711h@4e {
diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
index 25780e945b15..2bd21b22ce95 100644
--- a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
+++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
@@ -9,7 +9,7 @@ Required sub-node:
- connector: The "usb-c-connector" attached to the hd3ss3220 chip. The
bindings of the connector node are specified in:
- Documentation/devicetree/bindings/connector/usb-connector.txt
+ Documentation/devicetree/bindings/connector/usb-connector.yaml
Example:
hd3ss3220@47 {
diff --git a/Documentation/devicetree/bindings/usb/typec-tcpci.txt b/Documentation/devicetree/bindings/usb/typec-tcpci.txt
index 0dd1469e7318..2082522b1c32 100644
--- a/Documentation/devicetree/bindings/usb/typec-tcpci.txt
+++ b/Documentation/devicetree/bindings/usb/typec-tcpci.txt
@@ -13,7 +13,7 @@ Required properties:
Required sub-node:
- connector: The "usb-c-connector" attached to the tcpci chip, the bindings
of connector node are specified in
- Documentation/devicetree/bindings/connector/usb-connector.txt
+ Documentation/devicetree/bindings/connector/usb-connector.yaml
Example:
diff --git a/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt b/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt
index 3d05ae56cb0d..ec80641208a5 100644
--- a/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt
+++ b/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt
@@ -8,11 +8,11 @@ Required properties:
- compatible : should include "gpio-usb-b-connector" and "usb-b-connector".
- id-gpios, vbus-gpios : input gpios, either one of them must be present,
and both can be present as well.
- see connector/usb-connector.txt
+ see connector/usb-connector.yaml
Optional properties:
- vbus-supply : can be present if needed when supports dual role mode.
- see connector/usb-connector.txt
+ see connector/usb-connector.yaml
- Sub-nodes:
- port : can be present.